5 Hardware Interface 5.1
Connectors
5.1.1
CameraLink® Connector
The CameraLink® cameras are interfaced to external components via •
a CameraLink® connector, which is defined by the CameraLink® standard as a 26 pin, 0.5" Mini Delta-Ribbon (MDR) connector to transmit configuration, image data and trigger.
•
a subminiature connector for the power supply, 7-pin Binder series 712.
The connectors are located on the back of the camera. Fig. 5.1 shows the plugs and the status LED which indicates camera operation.
Figure 5.1: Rear view of the CameraLink camera
The CameraLink® interface and connector are specified in [CL]. For further details including the pinout please refer to Appendix A. This connector is used to transmit configuration, image data and trigger signals.
5.1.2
Power Supply
The camera requires a single voltage input (see Table 3.5). The camera meets all performance specifications using standard switching power supplies, although well-regulated linear power supplies provide optimum performance. It is extremely important that you apply the appropriate voltages to your camera. Incorrect voltages will damage the camera.
For further details including the pinout please refer to Appendix A.
.
61