Issuu on Google+


Technical information Certification

THE TIVE' C E T O PR 'P ION SOLUT

FIREFLEX-S FIRE ROLLER SHUTTER - DATA SHEET

CE Mark (Declaration of conformity) Type Approval (Chiltern Dynamics - UKAS approved test laboratory) Testing Laboratory (BRE Testing – UKAS approved test laboratory) Compliant with Part 1 BS EN 13241-1: 2003 Mechanical Aspects EN12604, Safety in use of power operated doors. Side guide protection EN 12604: 2000 4.5.1 and EN 12453: 2000 5.1.1.3 Protection Against crushing, shearing or drawing in Electrical Safety Depending on the use Water Tightness EN 12489 Resistance to Wind Load EN 12444 Fire Resistance test B.S.476 : Part 22 : 1987 Integrity 241 minutes (4 hours) Air permeability EN 12427 Gravity and self-closing EN 12453 - 5.1.1.5 Anti fall back device EN 12453 - 5.1.1.5 Installation Instructions EN 12635: 2002 4.1.1.1 Durability of Mechanical Performance EN 12635: 2002 4.1.1.1

DIM D 130

ELEVATION

HEAD ROOM CLEARANCE (DIM B)

DIMENSION A

350

DIMENSION A

350

TEST: BRE Test report number 220737 ASSESSMENT: Assessment report number CC 224355 INETGRITY: 240 minutes

min 60

SPACE FOR CONNECTING CABLE

A. MASONRY GUIDE FIXING

A

Vertical Slot

157

Products Insulated Roller Shutter SERVICES LTD A DIVISION OF P&D GROUP

systems operated Roller Shutter Door Product Description: Power Safedrive Equipped with ELEKTROMATEN® Operator sizes 170Nm –1400Nm EC Guidelines Complies with the following Directive EC Construction Products 89/106/ Low Voltage Directive 73/23EEC Machinery Directive 98/37/EC Compatibility Directive 89/336/EEC Electromagnetic comply with the following above-mentioned products We hereby certify that the gly to their determination: standards when used accordin BS EN 13241-1 Annex ZA Chilt/P05003/01 BS EN 12489:2000 Water tightness Chilt/P05003/01 BS EN 12444:2000 Resistance to wind load Chilt/P05003/01 BS EN 12427:2000 Air permeability Chilt/PO5003/03 BS EN 12453:2000 Operating forces TorFV 4/023/024/025/026 12604:2000 EN BS dropping Safeguarding against

SOFFIT ANGLE

230 150

184

336

A

DIRECT DRIVE MOTOR CLEARANCE

A

GALVANISED STEEL HOOD

PLAN

L

DIM C 184

WIDTH

HEIGHT

DIM A

DIM B

2500

2500

400

450

3000

3000

450

500

4000

4000

450

500

5000

5000

500

550

6000

6000

550

600

7000

7000

600

650

Door hood addition - Dim B + 50

All Dimensions in mm

Manufactured by

Approved Laboratories: Wycombe HP14 4AD Lane, Hughenden Valley High Chiltern Dynamics Stocking until it has must not be put into service declaration of conformity relates rers instructions The Machinery to which this accordance with the manufactu assembled and installed in provisions of the been completely and safely to be in conformity with the installation has been declared and not until the complete machinery directive.

Danks Graham This declaration is made GRAHAM DANKS

95

CLEAR OPENING WIDTH OF SHUTTER 184

R

Manufacturer:

30

B. STEELWORK GUIDE FIXING

OPERATION The door is arranged for an electric motor unit with fusible link or solenoid release unit complete with built on starter, or direct drive maintained power.

2003 According to BS EN 13241-1:

B

30

MAIN SUPPORT BRACKETS Main support plates for the barrel and motor unit manufactured from mild steel. Support plates to BS 4360/43A with perimeter welded angles and structure support angles.

EC Declaration of Conformity

SECTION A - A FITTING SPACE FOR CONTROLS

BARREL Manufactured from seamless mild steel tube to BS4760 Grade 50C. Maximum barrel deflection measured at 1:400, fitted with precisionmachined BDMS axles to BS970 EN33 with end fitted plate wheel.

VERTICAL SIDE GUIDES Formed from pre-galvanized material having a minimum thickness of 2.5mm. The door guide is designed to allow reduced working face and tapered inner faces to provide automatic interlock/retaining feature.

300

OPENING HEIGHT

190

SHUTTER CURTAIN Manufactured from pre-galvanized material, 75mm curved lath. The curtain, when assembled is held in position with purposely-designed end fittings, which act as a curtain alignment system. The bottom panel of the shutter is terminated with a galvanized steel angle with horizontal and vertical slots.

by

MANAGING DIRECTOR PRODUCTS INSULATED ROLLER SHUTTER

A Division of P&D Group Services Ltd

C

Motor Controlled Descent Direct Drive Power to Close


THE IVE' T C E T PRO TION 'P SOLU

FIREFLEX S - THE PROTECTIVE SOLUTION DIM D 130

ELEVATION

HEAD ROOM CLEARANCE (DIM B)

DIMENSION A

350

DIMENSION A

350

FIRE ROLLER SHUTTER SHUTTER CURTAIN Manufactured from pre-galvanized material, 75mm curved lath. The curtain, when assembled is held in position with purposely designed end fittings, which act as a curtain alignment system. The bottom panel of the shutter is terminated with a galvanized steel angle with horizontal and vertical slots.

300

OPENING HEIGHT

190

min 60

SPACE FOR CONNECTING CABLE

OPERATION The door is arranged for an electric motor unit with fusible link or solenoid release unit complete with built on starter, or direct drive maintained power.

SECTION A - A FITTING SPACE FOR CONTROLS

A. MASONRY GUIDE FIXING

A

ORDER INFORMATION

B

30

JOB No:

30 Vertical Slot

ORDER No: B. STEELWORK GUIDE FIXING

OPENING HEIGHT: OPENING WIDTH:

157

95

GUIDE TYPE: DELIVERY DATE:

CLEAR OPENING WIDTH OF SHUTTER 184

SOFFIT ANGLE

230 150

DELIVERY ADDRESS:

184

336

A

DIRECT DRIVE MOTOR CLEARANCE

A R

GALVANISED STEEL HOOD

PLAN

L

DIM C

GENERAL NOTES:

WIDTH

HEIGHT

DIM A

DIM B

2500

2500

350

450

3000

3000

400

500

4000 5000

4000 5000

400 450

550 600

6000

6000

500

650

Door hood addition - Dim B + 50

Manufactured by

All Dimensions in mm

A Division of P&D Group Services Ltd

184

C


Dock Shelters

Resellers’ price list Nr. LS09-2

Armo s.p.a. – Via Rosa di Luxemburg, 1 – 10093 Collegno (To) Italy Tel: +39-011-7176011 Fax: +39-011-7176019 E-mail:info@armoweb.com Web: http://www.armoweb.com


armo

Resellers’ price list Pag. 2 di 3

Dock shelters are necessary to correctly isolate your staff and goods of your warehouses from bad weather conditions and sudden variations of temperature. With the installation of ARMO dock shelters you save on a lot of energy.

STRUCTURE       

Dock shelter with front part in black rubber with differential stiffness. Opening/closing device through swinging scissors. The truck, by coming back, can press the dock shelter structure without causing damages. Self-carrying structure in SENDMIR galvanized steel tube, telescopic type, to deaden possible impacts with trucks. Structure front part in pre-painted white steel. Frontal realized in anti-wearing black rubber plates with anti-cut warp Covering tarpaulin in polyester PVC, anti-flame Class 2 Warning arrows to centre the truck.


armo

Resellers’ price list Pag. 3 di 3

Flat roof model PIW-S Structure characteristics Outside width Side panels Upper panel Outside height Depth

mm mm mm mm mm

3400 700 1000 3500 650

Flat roof model PIW-T Structure characteristics Outside width Side panels Upper panel Outside height Depth

mm mm mm mm mm

3400 700 1000 4500 650

Tech. features can change without advise. This booklet is not to be considered as a contract and all the information are to be considered as advises. Errors and omissis can be found. Photos and drawings are for illustration proposal only.



BAAB Submittal