Page 1

Audi MMI Colour Microphone and Audio set up BTA1500

1. Pair in the phone as normal. 2. Enter the DIAL NUMBER screen on the TEL control. (Turn the click wheel to the left)

3. First we can set the Microphone by entering the following: *** Then a number between 1 and 31 The figure between 1 and 31 alters the DSP setting and the gain setting of the microphone. This is not a volume, it is a analogue cycle setting. (1 is not the lowest and 31 is not the highest) Please see the table to see the best setting for your phone and vehicle settings. 4. Now press dial on the MMI. 5. After about 10 seconds the call will automatically hang up. The software is now stored for the microphone. 6. We can now set the volume output from the speakers when on a call 7. We can now set the output volume by entering the following: Then a number between 1 and 31


8. 9. 10. 11. 12. 13.

The figure between 1 and 31 alters the DSP setting and the gain setting of the volume output. This is not a volume, it is a analogue gain setting. (1 is not the lowest and 31 is not the highest) Please see the table to see the best setting for your phone and vehicle settings. Now press dial on the MMI. After about 10 seconds the call will automatically hang up. The software is now stored for the audio output. Now make a call and check the settings for the best audio and microphone output. Also check for echo feedback. (you can hear yourself when you speak on the handset) If you are not happy with the settings, this can be carried out as many times as you like. Each time you pair a phone this procedure will have to be carried out for the phone settings.

BTA1500 Audi A6 MMI colour

Microphone Nokia 9 Sony Er 11 iPhone 12 BlackBerry 6

Speaker 6 6 8 6

Settaggio Audio Dension 500  

Per AUDI A6

Read more
Read more
Similar to
Popular now
Just for you