Page 1

Enclosure Catalogue 2012:Layout 1

16/4/12

3:03 PM

Page 1


Enclosure Catalogue 2012:Layout 1

16/4/12

3:03 PM

Page 2

“Committed to Service” © Copyright Eltech Industries - 2012 This publication is copyright. Other than for the purposes of and subject to the conditions prescribed under the copyright act, no part of it may in any form or by any means be reproduced, stored in a retrieval system or transmitted without prior written permission of Eltech Industries. While every effort has been made to ensure the accuracy of the information herein, Eltech Industries accepts no liability for any loss or damage, either direct or consequential, arising out of, or in relation to, the use or application of the said information or products referred to herein. All information, specifications and prices are subject to change without any prior notice. All prices quoted exclude GST and delivery. Photographs and images are for illustrative purposes only and may vary from products depicted. Information correct at time of publication. Brand and product names are trademarks or registered trademarks of their respective holders.


Enclosure Catalogue 2012:Layout 1

16/4/12

3:04 PM

Page 3

About Eltech Industries Eltech Industries is pleased to announce the acquisition of three notable Italian distributorships of industrial electrical enclosure products. These distributorships and their products will be an excellent addition to our already impressive line-up of high quality products. The ETA range of high quality steel and stainless steel enclosure products brings a wealth of experience, knowledge and solutions to the electrical industry. The extensive ETA range of products, covers everything from terminal boxes to wall mount enclosures through to free standing enclosure suites and modular control desks, both in mild steel powder coated and stainless steel. With over 40 years experience in the manufacturing of electrical products, Elettrocanali also brings additional high quality products to our range of enclosures. This includes both Thermoresistant and Polycarbonate junction boxes. These products are also produced in Italy, being manufactured in Elettrocanali’s state-of-art production facilities in Pedrengo. Alfa Electric with their benchmark quality, product range of climate control systems, has contributed to ‘setting the stage’ for Eltech Industries objectives of offering the ‘complete package’ to its clients. Manufactured in the heart of Italy’s manufacturing hub, these affordable and yet high quality products meet and exceed the requirements and expectations of the electrical industry.

Contents Elettrocanali Thermoresistant Junction Boxes - IP 56.............................................2 Elettrocanali Polycarbonate Junction Boxes - IP 56................................................3 ETA SDV - Series - Steel Terminal Boxes - IP66......................................................4 ETA SDX - Series - Stainless Steel Terminal Boxes - IP66 ......................................5 ETA ST - Series - Steel Wall Mount Enclosures - IP66 ............................................6 ETA ST - Series - Enclosure Accessories ................................................................7 ETA STX - Series - Stainless Steel Wall Mount Enclosures - IP66 .........................8 ETA STX - Series - Enclosure Accessories ..............................................................9 ETA FPX - Series - Stainless Steel Wall Mount Enclosures - IP66 ........................10 ETA Enux - Series Free Standing Enclosure Solutions.....................................11-12 ETA Enux - Series Free Standing Enclosures - Mild Steel .....................................13 ETA Enux - Series Free Standing Enclosures - Accessories .................................14 ETA Areta - Series Free Standing Enclosures - Stainless Steel.............................15 ETA Areta - Control Desk Solutions - Mild Steel....................................................16 ETA Areta - Control Desk Solutions - Stainless Steel ..................................................17 PVC Standard Slotted Duct & Lids ........................................................................18 PVC Narrow Slotted Duct ......................................................................................19 DIN Mounting Rails, Rail Brackets, Self Tapping Metal Screws ............................20 Alfa Electric - Climate Control................................................................................21 Specifications - Dimensions .............................................................................24-29 Index / Pricing...................................................................................................30-31


Enclosure Catalogue 2012:Layout 1

16/4/12

3:04 PM

Page 4

We can custom manufacture enclosures to your specifications*.

Using our modification services, you can select from 100’s of standard products and apply holes and cut-outs, special brackets and alternative paint colours and finishes. Our modified enclosures offer the same quality as you’d expect from our standard products.

Customise...Modify...Adapt... Painted mild steel enclosures Stainless steel enclosures Desks and consoles ATB8/Areta cabinets

Holes and cut-outs in door/sides/gland plate Alternative paint colours and finishes Cut-out preparation for fans and filter assemblies Clear holes and threaded holes in Mounting Plates Assembly of optional accessories including mounting plates/sides/plinth bases/swing out rack frames

* Customization of enclosures attracts Minimum Order Quantities and above average delivery schedules

For more information call us on

1800 007 458 www.eltechindustries.com.au


Enclosure Catalogue 2012:Layout 1

16/4/12

3:04 PM

Page 1

Our Products

Industrial Enclosures


Enclosure Catalogue 2012:Layout 1

2

16/4/12

3:04 PM

Page 2

INDUSTRIAL ENCLOSURES

FEATURES

Elettrocanali Thermoresistant Junction Boxes - IP 56

EC410C4

EC410C7

EC420C6

INDUSTRIAL ENCLOSURES

EC420C7

• IP 56 Rated • Manufactured from ABS Technopolymer • Transparent or Grey Cover • UV Resistant • Colour: RAL 7035

Part No

Description (w x h x d)

EC410C4

100 x 100 x 50 - Grey Cover & Body

Qty 1

EC410C4R* 120 x 80 x 50 - Grey Cover & Body

1

EC410C5

150 x 110 x 70 - Grey Cover & Body

1

EC410C6

190 x 140 x 70 - Grey Cover & Body

1

EC410C7

240 x 190 x 90 - Grey Cover & Body

1

EC410C8

300 x 220 x 120 - Grey Cover & Body

1

EC410C9

380 x 300 x 120 - Grey Cover & Body

1

EC410C10

460 x 380 x 120 - Grey Cover & Body

1

EC430C5

150 x 110 x 140 - Grey Cover & Body

1

EC430C6

190 x 140 x 140 - Grey Cover & Body

1

EC430C7

240 x 190 x 160 - Grey Cover & Body

1

EC430C8

300 x 220 x 180 - Grey Cover & Body

1

EC430C9

380 x 300 x 180 - Grey Cover & Body

1

EC420C5

150 x 110 x 70 - Transparent Cover

1

EC420C6

190 x 140 x 70 - Transparent Cover

1

EC420C7

240 x 190 x 90 - Transparent Cover

1

EC420C8

300 x 220 x 120 - Transparent Cover

1

EC420C9

380 x 300 x 120 - Transparent Cover

1

EC420C10

460 x 380 x 120 - Transparent Cover

1

EC440C5

150 x 110 x 140 - Transparent Cover

1

EC440C6

190 x 140 x 140 - Transparent Cover

1

EC440C7

240 x 190 x 160 - Transparent Cover

1

EC440C8

300 x 220 x 180 - Transparent Cover

1

EC440C9

380 x 300 x 180 - Transparent Cover

1

EC450P6

190 x 140 Mounting Plate - Steel

1

EC450P7

240 x 190 Mounting Plate - Steel

1

EC450P8 EC450P9

300 x 220 Mounting Plate - Steel 380 x 300 Mounting Plate - Steel

1 1

EC450P10

460 x 380 Mounting Plate - Steel

1

*Indent Item

EC440C7

Freecall: 1800 007 458 Fax: 1300 885 122 www.eltechindsutries.com.au


Enclosure Catalogue 2012:Layout 1

16/4/12

3:04 PM

Page 3

INDUSTRIAL ENCLOSURES

3

FEATURES

Elettrocanali Polycarbonate Junction Boxes - IP 56 • IP 56 Rated • Manufactured from Polycarbonate material • Rated at 120°C • UV Resistant • Colour: RAL 7035

Part No

Description (w x h x d)

Qty

EC480C4

100 x 100 x 50 - Grey Cover & Body

EC480C4R*

120 x 80 x 50 - Grey Cover & Body

1

EC480C5

150 x 110 x 70 - Grey Cover & Body

1

EC480C6

190 x 140 x 70 - Grey Cover & Body

1

EC480C7

240 x 190 x 90 - Grey Cover & Body

1

EC480C8

300 x 220 x 120 - Grey Cover & Body

1

EC480C9

380 x 300 x 120 - Grey Cover & Body

1

EC480C10

460 x 380 x 120 - Grey Cover & Body

1

EC490C5

150 x 110 x 140 - Grey Cover & Body

1

EC490C6

190 x 140 x 140 - Grey Cover & Body

1

EC490C7

240 x 190 x 160 - Grey Cover & Body

1

EC490C8

300 x 220 x 180 - Grey Cover & Body

1

EC490C9

380 x 300 x 180 - Grey Cover & Body

1

EC450P6

190 x 140 Mounting Plate - Steel

1

EC450P7

240 x 190 Mounting Plate - Steel

1

EC450P8

300 x 220 Mounting Plate - Steel

1

EC450P9

380 x 300 Mounting Plate - Steel

1

EC450P10

460 x 380 Mounting Plate - Steel

1

1 EC480C4

EC480C7

INDUSTRIAL ENCLOSURES

*Indent Item

Freecall: 1800 007 458 Fax: 1300 885 122 www.eltechindsutries.com.au


Enclosure Catalogue 2012:Layout 1

4

16/4/12

3:04 PM

Page 4

INDUSTRIAL ENCLOSURES

FEATURES

ETA SDV Series - Steel Terminal Boxes - IP66

CHARACTERISTICS/DELIVERY • Box manufactured from 12/10 sheet steel with gland plates complete with gasket. • Lid fixed with captive screws • Holes for fixing hinges.

Part No

Description (B x A x P)

SDV1108

150 x 150 x 80

1

SDV2208

200 x 200 x 80

1

SURFACE FINISH • ETA standard epoxy polyester powder coating. • Colour: RAL 7035 textured finish.

SDV3208

300 x 200 x 80

1

SDV4208

400 x 200 x 80

1

CONFORMITY AND APPROVAL

SDV5208*

500 x 200 x 80

1

SDV6208*

600 x 200 x 80

1

SDV8208*

800 x 200 x 80

1

SDV1112

150 x 150 x 120

1

SDV2212

200 x 200 x 120

1

SDV3112

300 x 150 x 120

1

SDV3212

300 x 200 x 120

1

SDV3312*

300 x 300 x 120

1

SDV4212

400 x 200 x 120

1

SDV4312*

400 x 300 x 120

1

SDV4412*

400 x 400 x 120

1

SDV5212*

500 x 200 x 120

1

SDV5312*

500 x 300 x 120

1

SDV6212*

600 x 200 x 120

1

SDV6312*

600 x 300 x 120

1

SDV6412*

600 x 400 x 120

1

SDV8212*

800 x 200 x 120

1

SDV8412*

800 x 400 x 120

1

INDUSTRIAL ENCLOSURES

PROTECTION RATINGS • IP 66 complying with IEC EN62208; EN60529 • NEMA 4 complying with UL508A; UL50 • Protection degree guaranteed by the two-component polyurethane foam seal. • Impact resistance IK10 complying with IEC EN62208; EN50102.

Qty

* Not normally stocked

Freecall: 1800 007 458 Fax: 1300 885 122 www.eltechindsutries.com.au


Enclosure Catalogue 2012:Layout 1

16/4/12

3:04 PM

Page 5

INDUSTRIAL ENCLOSURES

5

FEATURES

ETA SDX Series - Stainless Steel Terminal Boxes - IP66 CHARACTERISTICS/DELIVERY • Boxes and door manufactured from 12/10 AISI 316L stainless steel (AISI 304L on request). • Lid fixing with stainless steel screws. • Holes for fixing the hinges. CONFORMITY AND APPROVAL

PROTECTION RATINGS • IP 66 complying with IEC EN62208; EN60529 • NEMA 4X complying with UL508A; UL50 • Impact resistance IK10 complying with IEC EN62208; EN50102

Part No

Description (B x A x P)

Qty

SDX1-108H

150 x 150 x 80

1

SDX2-208H

200 x 200 x 80

1

SDX3-208H

300 x 200 x 80

1

SDX1-112H

150 x 150 x 120

1

SDX4-212H

400 x 200 x 120

1

SDX3-312H

300 x 300 x 120

1

Accessories to suit SDV & SDX Terminal Boxes Accessories

Part No

Description (W x H)

Qty

SDPA-11

Mounting Plate 150 x 150

1

SDWC-010

Wall Mounting Bracket Kit - 4 Pieces

1

SDPA-22

Mounting Plate 200 x 200

1

SDWA-005

Door Hinges - 6 Pieces

1

SDPA-31

Mounting Plate 300 x 150

1

SDPA-32

Mounting Plate 300 x 200

1

SDPA-33

Mounting Plate 300 x 300

1

SDPA-42

Mounting Plate 400 x 200

1

SDPA-43

Mounting Plate 400 x 300

1

SDPA-44

Mounting Plate 400 x 400

1

SDPA-52

Mounting Plate 500 x 200

1

SDPA-53

Mounting Plate 500 x 300

1

SDPA-62

Mounting Plate 600 x 200

1

SDPA-63

Mounting Plate 600 x 300

1

SDPA-64

Mounting Plate 600 x 400

1

SDPA-82

Mounting Plate 800 x 200

1

SDPA-84

Mounting Plate 800 x 400

1

Part No

Description

Freecall: 1800 007 458 Fax: 1300 885 122 www.eltechindsutries.com.au

Qty

INDUSTRIAL ENCLOSURES

Mounting Plates


Enclosure Catalogue 2012:Layout 1

6

16/4/12

3:04 PM

Page 6

INDUSTRIAL ENCLOSURES

FEATURES

ETA ST Series - Steel Wall Mount Enclosures - IP66 CHARACTERISTICS • Enclosure and door manufactured from 15/10 sheet steel. • Flat mounting plate manufactured from 25/10 sendzimir sheet steel. SURFACE FINISH • ETA standard epoxy polyester powder coating. • Enclosure and door: colour RAL 7035 textured finish. DELIVERY • Enclosure supplied with: • 2 sendzimir rails to be fixed on the door • Mounting plate • Cable entry plate with sealing gasket • Screws for earth connection and mounting accessories. • Locking system with Ø 3mm double bar key CONFORMITY AND APPROVAL

PROTECTION RATINGS • IP 66 complying with IEC EN62208; EN60529 • NEMA 4 complying with UL508A; UL50 • Protection degree guaranteed by the two-component polyurethane foam seal • Impact resistance IK10 complying with IEC EN62208; EN50102.

INDUSTRIAL ENCLOSURES

Single Door Enclosures with Standard Locking System Part No

Dimensions (W x H x D)

Qty

Part No

Dimensions (W x H x D)

ST2-315 ST3-315

200 x 300 x 150

1

ST6-420

600 x 400 x 200

1

300 x 300 x 150

1

ST6-620

600 x 600 x 200

1

ST3-320

300 x 300 x 200

1

ST6-630

600 x 600 x 300

1

ST3-415

300 x 400 x 150

1

ST6-640

600 x 600 x 400

1

ST3-420

300 x 400 x 200

1

ST6-820

600 x 800 x 200

1

ST3-515

300 x 500 x 150

1

ST6-825

600 x 800 x 250

1

ST3-520

300 x 500 x 200

1

ST6-830

600 x 800 x 300

1

ST4-315

400 x 300 x 150

1

ST6-840

600 x 800 x 400

1

ST4-320

400 x 300 x 200

1

ST6-1025

600 x 1000 x 250

1

ST4-420

400 x 400 x 200

1

ST6-1030

600 x 1000 x 300

1

ST4-520

400 x 500 x 200

1

ST6-1040

600 x 1000 x 400

1

ST4-525

400 x 500 x 250

1

ST6-1230

600 x 1200 x 300

1

ST4-620

400 x 600 x 200

1

ST8-820

800 x 800 x 200

1

ST4-625

400 x 600 x 250

1

ST8-830

800 x 800 x 300

1

ST5-520

500 x 500 x 200

1

ST8-840

800 x 800 x 400

1

ST5-525

500 x 500 x 250

1

ST8-1030

800 x 1000 x 300

1

ST5-720

500 x 700 x 200

1

ST8-1040

800 x 1000 x 400

1

ST5-725

500 x 700 x 250

1

ST8-1230

800 x 1200 x 300

1

Double Door Enclosures with Standard Locking System

Qty

Double Door Enclosures with a Rod Locking System

Part No

Dimensions (W x H x D)

Part No

Dimensions (W x H x D)

ST8-630

800 x 600 x 300

Qty 1

ST10-1030

1000 x 1000 x 300

Qty 1

ST10-820

1000 x 800 x 200

1

ST10-1230

1000 x 1200 x 300

1

ST10-830

1000 x 800 x 300

1

ST12-1230

1200 x 1200 x 300

1

Freecall: 1800 007 458 Fax: 1300 885 122 www.eltechindsutries.com.au


Enclosure Catalogue 2012:Layout 1

16/4/12

3:04 PM

Page 7

INDUSTRIAL ENCLOSURES

7

ETA ST Series - Enclosure Accessories Horizontal Door Rails

FEATURES

Inner Doors • Powder Coated in RAL 7035 • Suitable for Industrial Applications • Includes a locking system

Part No

Description (W x H)

STP0145

Inner Door to suit 400 x 500 Enclosure

Part No

Description

Qty

WC001

To suit enclosure width 300

WC002

To suit enclosure width 400

1

WC003

To suit enclosure width 500

1

WC004

To suit enclosure width 600

1

WC005

To suit enclosure width 800

1

1

Door Stop Qty 1

STP0146

Inner Door to suit 400 x 600 Enclosure

1

STP0157

Inner Door to suit 500 x 700 Enclosure

1

STP0164

Inner Door to suit 600 x 400 Enclosure

1

STP0166

Inner Door to suit 600 x 600 Enclosure

1

STP0168

Inner Door to suit 600 x 800 Enclosure

1

STP01610

Inner Door to suit 600 x 1000 Enclosure

1

STP01612

Inner Door to suit 600 x 1200 Enclosure

1

STP01810

Inner Door to suit 800 x 1000 Enclosure

1

STP01812

Inner Door to suit 800 x 1200 Enclosure

1

Part No WA060

Description

Qty

Door Stop to suit ST Enclosures

1

Holds doors at 90 degrees, includes mounting accessories & gaskets to maintain IP66

Door Stop

Mounting Plate Adjuster

Mounting Plate Adjuster Part No

Description

Qty

WA980

To suit enclosure depth 200mm

1

WA981

To suit enclosure depth 250mm

1

WA982

To suit enclosure depth 300mm

1

• Powder Coated in RAL 7035 • Suitable for Industrial Applications • Comes complete with mounting hardware

Wall Mounting Brackets

Part No

Description (W x D)

TT104

Weather Canopies 400w x 200d

1

TT204

Weather Canopies 400w x 250d

1

TT105

Weather Canopies 500w x 200d

1

TT205

Weather Canopies 500w x 250d

1

TT106

Weather Canopies 600w x 250d

1

TT206

Weather Canopies 600w x 300d

Qty

Part No

Description

SDWC-101

Wall Mounting Bracket Kit - 4 Piece

Locking Systems

Qty

WE285

1

WE288

Part No

Description

1

WE235

Viro Coin Lock - Incl. Key

Qty 1

TT108

Weather Canopies 800w x 250d

1

WE285

T-Handle with a keylock

1

TT208

Weather Canopies 800w x 300d

1

WE288

Wing Handle with a keylock

1

Freecall: 1800 007 458 Fax: 1300 885 122 www.eltechindsutries.com.au

INDUSTRIAL ENCLOSURES

FEATURES

Weather Canopies


Enclosure Catalogue 2012:Layout 1

8

16/4/12

3:04 PM

Page 8

INDUSTRIAL ENCLOSURES

FEATURES

ETA STX Series - Stainless Steel Wall Mount Enclosures - IP66 CHARACTERISTICS • Enclosure and door manufactured from AISI 316L 15/10 sheet steel(AISI 304L on request). • Flat mounting plate manufactured from 25/10 sendzimir sheet steel. • Hinge in stainless steel. DELIVERY • Box complete with: • Mounting plate • Locking system body in zinc alloy and lever in stainless steel with Ø 3mm double bar key • Package with hardware for earth connection and screws for mounting plate. CONFORMITY AND APPROVAL

Also available with a Glazed Door

INDUSTRIAL ENCLOSURES

*Not normally stocked

PROTECTION RATINGS • IP 66 complying with IEC EN62208; EN60529 • NEMA 4X complying with UL508A; UL50 • Impact resistance IK10 complying with IEC EN62208; EN50102.

Part No

Dimensions (W x H x D)

Qty

STX2-315H

200 x 300 x 150

1

STX3-415H

300 x 400 x 150

1

STX3-420H

300 x 400 x 200

1

STX4-315H

400 x 300 x 150

1

STX4-420H

400 x 400 x 200

1

STX4-520H

400 x 500 x 200

1

STX4-620H

400 x 600 x 200

1

STX5-520H

500 x 500 x 200

1

STX5-725H

500 x 700 x 250

1

STX6-420H

600 x 400 x 200

1

STX6-620H

600 x 600 x 200

1

STX6-625H

600 x 600 x 250

1

STX6-630H

600 x 600 x 300

1

STX6-820H

600 x 800 x 200

1

STX6-825H

600 x 800 x 250

1

STX6-830H

600 x 800 x 300

1

STX6-1230H

600 x 1200 x 300

1

STX8-830H

800 x 800 x 300

1

STX8-1030H

800 x 1000 x 300

1

STX8-1230H

800 x 1200 x 300

1

STX10-1030H

1000 x 1000 x 300 - Double Door

1

STX10-1230H

1000 x 1200 x 300 - Double Door

1

Freecall: 1800 007 458 Fax: 1300 885 122 www.eltechindsutries.com.au


Enclosure Catalogue 2012:Layout 1

16/4/12

3:04 PM

Page 9

INDUSTRIAL ENCLOSURES

9

ETA STX Series - Enclosures Accessories

FEATURES

Inner Doors • Frame and door manufactured from 15/10 AISI 316L Stainless Steel • Suitable for Industrial Applications • Includes a locking system

Part No

Description (W x H)

STP01-34XH

Inner Door to suit 300 x 400 Enclosure

Qty 1

STP01-45XH

Inner Door to suit 400 x 500 Enclosure

1

STP01-46XH

Inner Door to suit 400 x 600 Enclosure

1

STP01-57XH

Inner Door to suit 500 x 700 Enclosure

1

STP01-68XH

Inner Door to suit 600 x 800 Enclosure

1

*Not normally stocked

FEATURES

Weather Canopies • Manufactured from 15/10 AISI 316L Stainless Steel • Suitable for Industrial Applications • Comes complete with mounting hardware

Part No

Description (W x D)

Qty

TTX1-04H

Weather Canopies 400w x 200d

1

TTX1-05H

Weather Canopies 500w x 200d

1

TTX2-05H

Weather Canopies 500w x 250d

1

TTX1-06H

Weather Canopies 600w x 250d

1

TTX2-08H

Weather Canopies 800w x 300d

1

*Not normally stocked

Wall Mounting Brackets Part No

Description

SDWCX-101H Wall Mounting Bracket Kit - 4 Piece - Stainless Steel 316L

Qty 1

INDUSTRIAL ENCLOSURES

*Not normally stocked

Freecall: 1800 007 458 Fax: 1300 885 122 www.eltechindsutries.com.au


Enclosure Catalogue 2012:Layout 1

10

16/4/12

3:04 PM

Page 10

INDUSTRIAL ENCLOSURES

FEATURES

ETA FPX Series - Stainless Steel Wall Mount Enclosures - IP66 CHARACTERISTICS • Structure and door made of 15/10 AISI 316L stainless sheet steel (AISI 304L upon request). • Mounting plate made of 25/10 thick sendzimir sheet steel. • Stainless steel hinge. DELIVERY The box is supplied with: • Mounting plate. • Closing system with alloyed zinc body and stainless steel lever, with ø 3mm double bar key. • Set of screws for grounding and mounting plate assembling. • Cable entry plate. PROTECTION RATINGS • IP 66 complying with IEC EN62208. • NEMA 4X complying with UL508A; UL50. • Impact resistance IK10.

Dimensions (W x H x D)

Qty

FPX4-515H

400 x 503 x 150

1

FPX4-620H

400 x 603 x 200

1

FPX5-730H

500 x 703 x 300

1

FPX6-825H

600 x 803 x 250

1

FPX8-1025H

800 x 1003 x 250

1

FPX8-1030H

800 x 1003 x 300

1

FPX8-1230H

800 x 1203 x 300

1

INDUSTRIAL ENCLOSURES

Part No

Freecall: 1800 007 458 Fax: 1300 885 122 www.eltechindsutries.com.au


Enclosure Catalogue 2012:Layout 1

16/4/12

3:04 PM

Page 11

INDUSTRIAL ENCLOSURES

11

ETA Enux - Sustainable, Strong and Performing Cabinets 1

5-6

3 8 4

4

7

9 11

2

10

5-6

12

1

Removable roof and bottom to simplify glanding.

8

Door with strengthening frame.

2

Simple structure assembled with 8 screws only, thanks to the exclusive orthogonal joint made of special steel.

9

Sturdy panels for high structural stiffness.

10

Modular cable entry bottom with adjustable base plates and seal, consisting of one welded piece with box-type construction made of high resistance material.

11

Front-inserted mounting plate, which can be recessed flush with the uprights thanks to the effective sliding guides system integrated in the bottom.

12

Easy-to-assemble modular plinth EUZE.

13

Possibility to adapt a fully modular walkable cable conduit.

14

Wide range of complementary accessories.

15

Wide range of sizes and unified structure for the configuration of automation cabinets, modular solutions, PC enclosures, control desks, 19� rack solutions, and telecom/networking cabinets.

3

Sturdy structural uprights made of high-resistance materials with closed symmetric profile.

4

Besides the E NUX version, a second configuration with simplified door and plate (E NUX simplex) is available.

5

New colour for top, plinth and handle.

6

New colour (Pantone 2717U) for top, plinth and handle available from 2012.

7

Opening system with a unique lever mechanism, unique design and: 3-point locking for H = 1400 and 1600 4-point locking for H = 1800 and 2000 5-point locking for H = 2200 with possibility to mount different inserts and convenient lock release system of the slave door of the double door cabinet.

Freecall: 1800 007 458 Fax: 1300 885 122 www.eltechindsutries.com.au

INDUSTRIAL ENCLOSURES

Features & Benefits


Enclosure Catalogue 2012:Layout 1

12

16/4/12

3:05 PM

Page 12

INDUSTRIAL ENCLOSURES

FEATURES

ETA Enux - Single and Double Door CHARACTERISTICS/DELIVERY The profile used for uprights and crosspieces is unique, manufactured from 12/10 high-resistance sheet steel, closed with continuous welding and free of sharp edges. The bottom is a single piece with boxtype structure made of press-bent welded profiles of 12/10 high-resistance sheet steel. The frame corners are manufactured with orthogonal joints laser welded to vertical upright rails and horizontal rails for the roof and bottom. Only 8 high resistance screws are necessary to mount the structure, while two position pins allow the easy mounting of the two parts of the joint. SURFACE FINISH • ETA standard epoxy polyester powder coating. • Structure: RAL 7035 smooth finish • Door and rear panel: RAL 7035 textured finish. • Roof: RAL 7035 textured finish. ASSEMBLED E NUX CABINET (PR) • Structure manufactured from 12/10 high-resistance sheet steel • Door manufactured from 20/10 sheet steel with stiffening frame, complete with Ø 3mm leveroperated double bar locking system • Rear panel manufactured from 10/10 sheet steel • Removable roof manufactured from 10/10 sheet steel • Bottom manufactured from 12/10 high-resistance sheet steel with adjustable cable entry (double cable entry for W=1000), complete with seal supplied separately. FLAT-PACK E NUX CABINET (ASSEMBLY WITH 8 SCREWS ONLY)

• Composition to be assembled complying with customers requests • Panels and doors are supplied together with two vertical uprights complete with accessories. CONFORMITY AND APPROVAL (approval pending)

INDUSTRIAL ENCLOSURES

PROTECTION RATINGS • IP55 complying with IEC EN62208; EN60529 • NEMA 12 complying with UL508A; UL50 • Protection degree guaranteed by the two-component polyurethane foam seal • Impact resistance IK10 complying with IEC EN62208; EN50102.

Pantone 2717 U Alternative colour for roof, plinth & door handle now available. E NUX accessories, see page 14

Freecall: 1800 007 458 Fax: 1300 885 122 www.eltechindsutries.com.au


Enclosure Catalogue 2012:Layout 1

16/4/12

3:05 PM

Page 13

INDUSTRIAL ENCLOSURES

13

ETA Enux Series - Free Standing Enclosures - Mild Steel

Plinth Kit not included

Dimensions (WxHxD)

Sub Frame Inc Door & Back Panel*

Side Panels (2 pieces)

Plinth Kit + Universal Corners

Suite Complete*

600 x 1800 x 400

ENUX061804PR

EUFI040180

EUZE-060401

ENUX061804SC

600 x 1800 x 500

ENUX061805PR

EUFI050180

EUZE-060501

ENUX061805SC

600 x 1800 x 600

ENUX061806PR

EUFI060180

EUZE-060601

ENUX061806SC

600 x 2000 x 400

ENUX062004PR

EUFI040200

EUZE-060401

ENUX062004SC

600 x 2000 x 500

ENUX062005PR

EUFI050200

EUZE-060501

ENUX062005SC

600 x 2000 x 600

ENUX062006PR

EUFI060200

EUZE-060601

ENUX062006SC

800 x 1800 x 400

ENUX081804PR

EUFI040180

EUZE-080401

ENUX081804SC

800 x 1800 x 500

ENUX081805PR

EUFI050180

EUZE-080501

ENUX081805SC

800 x 1800 x 600

ENUX081806PR

EUFI060180

EUZE-080601

ENUX081806SC

800 x 2000 x 400

ENUX082004PR

EUFI040200

EUZE-080401

ENUX082004SC

800 x 2000 x 500

ENUX082005PR

EUFI050200

EUZE-080501

ENUX082005SC

800 x 2000 x 600

ENUX082006PR

EUFI060200

EUZE-080601

ENUX082006SC

1000 x 1800 x 400

ENUX101804PR

EUFI040180

EUZE-100401

ENUX101804SC

1000 x 1800 x 500

ENUX101805PR

EUFI050180

EUZE-100501

ENUX101805SC

1000 x 1800 x 600

ENUX101806PR

EUFI060180

EUZE-100601

ENUX101806SC

1000 x 2000 x 400

ENUX102004PR

EUFI040200

EUZE-100401

ENUX102004SC

1000 x 2000 x 500

ENUX102005PR

EUFI050200

EUZE-100501

ENUX102005SC

1000 x 2000 x 600

ENUX102006PR

EUFI060200

EUZE-100601

ENUX102006SC

1200 x 1800 x 400

ENUX121804PR

EUFI040180

EUZE-120401

ENUX121804SC

1200 x 1800 x 500

ENUX121805PR

EUFI050180

EUZE-120501

ENUX121805SC

1200 x 1800 x 600

ENUX121806PR

EUFI060180

EUZE-120601

ENUX121806SC

1200 x 2000 x 400

ENUX122004PR

EUFI040200

EUZE-120401

ENUX122004SC

1200 x 2000 x 500

ENUX122005PR

EUFI050200

EUZE-120501

ENUX122005SC

1200 x 2000 x 600

ENUX122006PR

EUFI060200

EUZE-120601

ENUX122006SC

* Includes a mounting plate

Freecall: 1800 007 458 Fax: 1300 885 122 www.eltechindsutries.com.au

INDUSTRIAL ENCLOSURES

Free standing enclosures 1200mm wide come complete with double doors


Enclosure Catalogue 2012:Layout 1

14

16/4/12

3:05 PM

Page 14

INDUSTRIAL ENCLOSURES

ETA Enux Series - Free Standing Enclosures - Accessories Mounting Plate & Bracket

Inner Doors Part No

Description (W x H) mm

EUPI060180*

Inner Door to suit 600 x 1800 Enclosure

EUPI060200*

Inner Door to suit 600 x 2000 Enclosure

EUPI080180*

Inner Door to suit 800 x 1800 Enclosure

EUPI080200*

Inner Door to suit 800 x 2000 Enclosure

Qty

Part No.

Description (W x H)

1

EUPA-060180

Mounting Plate 600 x 1800

1

1

EUPA-060200

Mounting Plate 600 x 2000

1

1

EUPA-080180

Mounting Plate 800 x 1800

1

1

EUPA-080200

Mounting Plate 800 x 2000

1

EUPA-100180

Mounting Plate 1000 x 1800

1

EUPA-100200

Mounting Plate 1000 x 2000

1

EUPA-120180

Mounting Plate 1200 x 1800

1

EUPA-120200

Mounting Plate 1200 x 2000

1

WTKB-002

Mounting Kit to suit above

1

* Indent Items

Qty

Accessories

INDUSTRIAL ENCLOSURES

Intermediate Plates Part No

Description (Height) mm

Qty

EUPN-001800

Intermediate Plate 1800mm

1

EUPN-002000

Intermediate Plate 2000mm

1

Part No

Description (Height) mm

Qty

EUKU-002

Joining Kit (8 pieces)

1

EUKU-003

Reinforcing Brackets (4 pieces)

1

WTGS-001

Lifting Eyebolts (4 pieces)

1

WTSS-001

Lifting Brackets (4 pieces)

1

WA050

Thermoplastic Document Holder A4

1

EUKU-002

WTGS-001

WA050

Freecall: 1800 007 458 Fax: 1300 885 122 www.eltechindsutries.com.au


Enclosure Catalogue 2012:Layout 1

16/4/12

3:05 PM

Page 15

INDUSTRIAL ENCLOSURES

15

FEATURES

ETA Areta Series - Free Standing Enclosures - Stainless Steel CHARACTERISTICS STRUCTURE • Rails are made up of unique closed profile manufactured from 15/10 AISI 304L stainless steel. • The frame corners are manufactured with orthogonal joints in AISI 304L stainless steel, laser welded to the rails. • Only 8 high resistance screws in stainless steel are necessary to mount the structure, while two position pins allow the easy mounting of the two parts of the joint. • Doors manufactured from 20/10 AISI 304L (AISI316L on request) satin stainless steel with tubular stiffening frame. • Hinges are made in zinc alloy, chrome plated, open 180° (hinges manufactured from AISI 316L stainless steel on request). • Rear panel manufactured from 15/10 AISI 304L (AISI 316L on request) satin stainless steel. • Roof manufactured from 15/10 AISI 304L (AISI 316L on request) satin stainless steel. • Bottom manufactured from 15/10 AISI 304L (AISI 316L on request) satin stainless steel. DELIVERY • Structure • Door complete with Ø 3mm double bar locking system • Rear panel • Removable roof • Bottom with removable cable entry. CONFORMITY AND APPROVAL

INDUSTRIAL ENCLOSURES

PROTECTION RATINGS • IP 55 complying with IEC EN62208; EN60529 • NEMA 12 complying with UL508A; UL50 • Impact resistance IK10 complying with IEC EN62208; EN50102.

Freecall: 1800 007 458 Fax: 1300 885 122 www.eltechindsutries.com.au


Enclosure Catalogue 2012:Layout 1

16

16/4/12

3:05 PM

Page 16

INDUSTRIAL ENCLOSURES

FEATURES

ETA Areta - Control Desk Solutions - Mild Steel ARETA AL The control desk series AL is based on the same vertical modularity concept successfully tested with the PC enclosure: the basic enclosure with Areta structure is completed with a front frame that can be fitted with a closing panel or a shelf. Available in 4 widths, 2 depths and one height within 1400mm, the range of control desks can be completed with Areta accessories, to enrich a unique product in its category. CHARACTERISTICS/DELIVERY • ARETA structure with rear door or panel (assembled or in kit) • ATAL front frame complete with upper and lower door • The front structure must be completed with shelf ATME…AL or front panel ATPN…AL. SURFACE FINISH • ETA standard epoxy polyester powder coating. • Structure: colour RAL 7035 smooth finish • Roof and bottom: colour RAL 7025 textured finish • AL front, rear door or panel: colour RAL 7035 textured finish.

INDUSTRIAL ENCLOSURES

PROTECTION RATINGS • IP 55.

Freecall: 1800 007 458 Fax: 1300 885 122 www.eltechindsutries.com.au


Enclosure Catalogue 2012:Layout 1

16/4/12

3:05 PM

Page 17

INDUSTRIAL ENCLOSURES

17

FEATURES

ETA Areta - Control Desk Solutions - Stainless Steel CHARACTERISTICS • Structure manufactured from 15/10 AISI 304L press bent stainless steel material. • Mounting plate manufactured from 25/10 sendzimir sheet steel mounted on the rear cover. • Upper cover manufactured from 15/10 AISI 304L material with sendzimir profiles and mechanical stop. • Adjustable cable entry. Item in AISI 316L available on request. DELIVERY • Control desk • Doors complete with Ø 3mm double bar key locking system • Mounting plate • Upper cover complete with locking system • Adjustable cable entry. CONFORMITY AND APPROVAL

INDUSTRIAL ENCLOSURES

PROTECTION RATINGS • IP 55. • NEMA 12 complying with UL508A; UL50.

Freecall: 1800 007 458 Fax: 1300 885 122 www.eltechindsutries.com.au


Enclosure Catalogue 2012:Layout 1

18

16/4/12

3:05 PM

Page 18

COMPLIMENTARY ACCESSORIES

FEATURES

PVC Standard Slotted Duct

2540SSD

6060SSD

• Low Smoke Low Halogen • Sold in 2 Metre Lengths • Standard Colour: Grey • Split packs available

Part No

Description

2530SSD

Open Slot 25W x 30H

Pack Qty/L 80L

$13.70

Price $/L

2540SSD

Open Slot 25W x 40H

56L

$20.16

2560SSD

Open Slot 25W x 60H

50L

$24.38

2580SSD

Open Slot 25W x 80H

36L

$30.32

4040SSD

Open Slot 40W x 40H

50L

$21.00

4060SSD

Open Slot 40W x 60H

36L

$27.18

4080SSD

Open Slot 40W x 80H

24L

$35.66

40100SSD

Open Slot 40W x 100H

20L

$65.66

6060SSD

Open Slot 60W x 60H

24L

$40.40

6080SSD

Open Slot 60W x 80H

16L

$51.42

60100SSD

Open Slot 60W x 100H

16L

$79.38

8060SSD

Open Slot 80W x 60H

18L

$51.42

8080SSD

Open Slot 80W x 80H

12L

$55.06

80100SSD

Open Slot 80W x 100H

12L

$86.72

10080SSD

Open Slot 100W x 80H

12L

$86.72

100100SSD

Open Slot 100W x 100H

12L

$117.64

Part No

Description

Qty

DL-25

Lid Only 25mm Wide - Grey

1L

$9.60

DL-40

Lid Only 40mm Wide - Grey

1L

$13.96

DL-60

Lid Only 60mm Wide - Grey

1L

$22.90

DL-80

Lid Only 80mm - Wide - Grey

1L

$24.26

DL-100

Lid Only 100mm Wide - Grey

1L

$58.94

COMPLIMENTARY ACCESSORIES

PVC Slotted Duct Lids

Please Note: Duct Lids suit both Standard & Narrow Slotted Duct

Freecall: 1800 007 458 Fax: 1300 885 122 www.eltechindsutries.com.au

Price $/L


Enclosure Catalogue 2012:Layout 1

16/4/12

3:05 PM

Page 19

COMPLIMENTARY ACCESSORIES

19

FEATURES

PVC Narrow Slotted Duct • Easy-Snap Finger System • 6.0mm Wide Finger with 4.0mm Spacing • Low Smoke. Low Halogen • Sold in 2 Metre Lengths • Split packs available

Part No

Description

Pack Qty/L

2530NSD

Narrow Slot Duct 25W x 30H

80L

2540NSD

Narrow Slot Duct 25W x 40H

56L

2560NSD

Narrow Slot Duct 25W x 60H

50L

2580NSD

Narrow Slot Duct 25W x 80H

36L

4040NSD

Narrow Slot Duct 40W x 40H

50L

4060NSD

Narrow Slot Duct 40W x 60H

36L

4080NSD

Narrow Slot Duct 40W x 80H

24L

40100NSD

Narrow Slot Duct 40W x 100H

20L

6060NSD

Narrow Slot Duct 60W x 60H

24L

6080NSD

Narrow Slot Duct 60W x 80H

16L

Narrow Slot Duct 60W x 100H

16L

Narrow Slot Duct 80W x 60H

18L

8080NSD

Narrow Slot Duct 80W x 80H

12L

80100NSD

Narrow Slot Duct 80W x 100H

12L

10080NSD

Narrow Slot Duct 100W x 80H

12L

100100NSD

Narrow Slot Duct 100W x 100H

12L

COMPLIMENTARY ACCESSORIES

60100NSD 8060NSD

Freecall: 1800 007 458 Fax: 1300 885 122 www.eltechindsutries.com.au


Enclosure Catalogue 2012:Layout 1

20

16/4/12

3:05 PM

Page 20

COMPLIMENTARY ACCESSORIES

FEATURES

DIN Mounting Rails

AUSR35/7.5S

AUSR35/7.5ALS

• Sold in 2 Metre Lengths • Available in Steel & Aluminium • Split Packs Available

Part No

Description

Qty

AUSR35/7.5

35 x 7.5mm Steel Plain

20L

AUSR35/7.5S

35 x 7.5mm Steel Slotted

20L

AUSR35/7.5AL

35 x 7.5mm Aluminium Plain

20L

AUSR35/7.5ALS

35 x 7.5mm Aluminium Slotted

20L

AUSR35/15

35 x 15mm Steel Plain

10L

AUSR35/15S

35 x 15mm Steel Slotted

10L

AUSR32/G

32mm 'G' Steel Plain

10L

AUSR32/GS

32mm 'G' Steel Slotted

10L

AUSR35/15

DIN Mounting Rail Brackets Part No

Description

1201099

30° Angle Bracket & Screw

Qty 1

1201099

COMPLIMENTARY ACCESSORIES

Self Tapping Metal Screws Part No

Description

Qty

SDS12

Washer Head Screw 12mm x 8G

1000*

SDS16

Washer Head Screw 16mm x 8G

1000*

SDS25

Washer Head Screw 25mm x 8G

1000*

* Pack quantities apply

Freecall: 1800 007 458 Fax: 1300 885 122 www.eltechindsutries.com.au


Enclosure Catalogue 2012:Layout 1

16/4/12

3:05 PM

Page 21

CLIMATE CONTROL

21

Alfa Electric Filter Fan & Grill Part No

Description

Qty

ALFA500BPB

Filter Fan & Grill 114 x 114mm 24m3/h 230V

1

ALFA1600BPB

Filter Fan & Grill 150 x 150mm 55m3/h 230V

1

ALFA2300BPB

Filter Fan & Grill 250 x 250mm 105m3/h 230V

1

ALFA2500BPB

Filter Fan & Grill 250 x 250mm 230m3/h 230V

1

ALFA2600BPB

Filter Fan & Grill 250 x 250mm 370m3/h 230V

1

ALFA3500BPB

Filter Fan & Grill 320 x 320mm 500m3/h 230V

1

ALFA3600BPB

Filter Fan & Grill 320 x 320mm 630m3/h 230V

1

Alfa Electric Filter & Grill Part No

Description

Qty

ALFAA000BPB

Filter + Grill 114 x 114mm

1

ALFA1000BPB

Filter + Grill 150 x 150mm

1

ALFA2000BPB

Filter + Grill 250 x 250mm

1

ALFA3000BPB

Filter + Grill 320 x 320mm

1

Alfa Electric Heaters Part No

Description

Qty

FSHT250

Fan Heater 250W 230V

1

SHT100

Heater 100W terminal connection

1

SHT25W

Heater 25W wire connection

1

SHT50W

Heater 50W wire connection

1

Alfa Electric Thermostats Description

Qty

ETUH22

Thermo-Hygrostat 0-60 deg C

1

THR02

Thermostat NC 0-60 deg C (Heating)

1

THRV22

Dual Thermostat NC 0-60 & NO 0-60 deg C

1

THV02

Thermostat NO 0-60 deg C (Cooling)

1

Freecall: 1800 007 458 Fax: 1300 885 122 www.eltechindsutries.com.au

CLIMATE CONTROL

Part No


Enclosure Catalogue 2012:Layout 1

16/4/12

3:05 PM

Page 22

alfa electric HEATING Heaters – Terminal Connecon > 25-150W

Heaters – Wire Connecon

Made in Italy

THERMAL MANAGEMENT for Electrical Enclosures for Electrical Enclosures

> 15-50W

Fan Heaters – Resistor & PTC > 250-2000W

Heaters – Compact PTC Heaters > 5-230W

CONTROL VENTILATION Filter Fans > 24-630 m3/hr Roof Fans > 600-1550 m3/hr Fan Trays > 300-450 m3/hr AC & DC Fans

> Thermostats > Double Thermostats > Thermo-Hygrostats > Digital Thermostats > Temperature Controllers > Flashing Safety Devices > Door Limit Switches

AIR CONDITIONING Air Condioner Rotary Compressor > 350W > 850W > 1450W

Call 1800 007 458 www.eltechindustries.com.au


Enclosure Catalogue 2012:Layout 1

16/4/12

3:05 PM

Page 23

Dimensional Specifications

Industrial Enclosures


Enclosure Catalogue 2012:Layout 1

24

16/4/12

3:05 PM

Page 24

INDUSTRIAL ENCLOSURES

Dimensions - ST Series - Single Door

only for A>800

ST 200 WIDE ST CODE ST2-315

BOX DIMENSIONS B 200

CABLE ENTRY P 150

A 300

C 150

E 130

F 50

DOOR SPACE M 91

MOUNTING PLATE DIM. L 150

H 250

NR OF LOCK 1

ST 300 WIDE ST CODE ST3-315 ST3-320 ST3-415 ST3-420 ST3-515 ST3-520

BOX DIMENSIONS B 300 300 300 300 300 300

A 300 300 400 400 500 500

CABLE ENTRY P 150 200 150 200 150 200

C 150 150 200 200 250 250

E 230 230 230 230 230 230

F 50 50 50 100 50 100

DOOR SPACE M 191 191 191 191 191 191

MOUNTING PLATE DIM. L 250 250 250 250 250 250

H 250 250 350 350 450 450

NR OF LOCK 1 1 1 1 1 1

ST 400 WIDE ST CODE ST4-315 ST4-320 ST4-420 ST4-520 ST4-525 ST4-620 ST4-625

BOX DIMENSIONS B 400 400 400 400 400 400 400

A 300 300 400 500 500 600 600

CABLE ENTRY P 150 200 200 200 250 200 250

C 150 150 200 250 250 100 100

E 230 330 330 330 330 330 330

F 50 100 100 100 100 100 100

DOOR SPACE M 291 291 291 291 291 291 291

MOUNTING PLATE DIM. L 350 350 350 350 350 350 350

H 250 250 350 450 450 550 550

NR OF LOCK 1 1 1 1 1 2 2

ST 500 WIDE ST CODE ST5-520 ST5-525 ST5-720 ST5-725

BOX DIMENSIONS B 500 500 500 500

A 500 500 700 700

CABLE ENTRY P 200 250 200 250

C 250 250 100 100

E 330 330 330 330

F 100 100 100 100

DOOR SPACE M 391 391 391 391

MOUNTING PLATE DIM. L 450 450 450 450

H 450 450 650 650

NR OF LOCK 1 1 2 2

ST 600 WIDE

INDUSTRIAL ENCLOSURES

ST CODE ST6-420 ST6-620 ST6-630 ST6-640 ST6-820 ST6-825 ST6-830 ST6-840 ST6-1025 ST6-1030 ST6-1040 ST6-1230

BOX DIMENSIONS B 600 600 600 600 600 600 600 600 600 600 600 600

A 400 600 600 600 800 800 800 800 1000 1000 1000 1200

CABLE ENTRY P 200 200 300 400 200 250 300 400 250 300 400 300

C 200 100 100 100 100 100 100 100 200 200 200 200

E 530 530 530 530 530 530 530 530 530 530 530 530

F 100 100 100 100 100 100 100 100 100 100 100 100

DOOR SPACE M 491 491 491 491 491 491 491 491 491 491 491 491

MOUNTING PLATE DIM. L 550 550 550 550 550 550 550 550 550 550 550 550

H 350 550 550 550 750 750 750 750 950 950 950 1150

NR OF LOCK 1 2 2 2 2 2 2 2 2 2 2 3

ST 800 WIDE ST CODE ST8-820 ST8-830 ST8-840 ST8-1030 ST8-1040 ST8-1230

BOX DIMENSIONS B 800 800 800 800 800 800

A 800 800 800 1000 1000 1200

CABLE ENTRY P 200 300 400 300 400 300

C 100 100 100 200 200 200

E 530 530 530 530 530 530

F 100 100 100 100 100 100

DOOR SPACE M 691 691 691 691 691 691

MOUNTING PLATE DIM. L 750 750 750 750 750 750

H 750 750 750 950 950 1150

NR OF LOCK 2 2 2 2 2 3

Freecall: 1800 007 458 Fax: 1300 885 122 www.eltechindsutries.com.au


Enclosure Catalogue 2012:Layout 1

16/4/12

3:05 PM

Page 25

INDUSTRIAL ENCLOSURES

25

Dimensions - ST Series - Double Door

BOX WITH STANDARD LOCKING SYSTEM

BOX WITH ROD SYSTEM

DOUBLE DOOR BOXES WITH STANDARD LOCKING SYSTEM ST CODE

BOX DIMENSIONS

CABLE ENTRY

NR CABLE ENTRY

B

A

P

E

F

ST8-630

800

600

300

530

100

ST10-820

1000

800

200

330

ST10-830

1000

800

300

330

DOOR SPACE

MOUNTING PLATE DIM.

M

L

H

1

291

750

550

100

2

391

950

750

100

2

391

950

750

DOUBLE DOOR BOXES WITH ROD SYSTEM ST CODE

BOX DIMENSIONS

CABLE ENTRY

MOUNTING PLATE DIM.

DOOR SPACE

B

A

P

E

F

M

L

H

ST10-1030

1000

1000

300

330

100

391

950

950

ST10-1230

1000

1200

300

330

100

391

950

1150

ST12-1230

1200

1200

300

330

100

491

1150

1150

INNER DOORS BOX DIMENSIONS B

A

NUMBER OF LOCKS

DOOR DIMENSIONS P

L

H

C

ST4520

400

500

200

330

444

222

ST4525

400

500

250

330

444

222

1 1

ST4620

400

600

200

330

544

272

1

ST4625

400

600

250

330

544

272

1

ST5720

500

700

200

430

644

322

1

ST5725

500

700

250

430

644

322

1

ST6420

600

400

200

530

344

172

1

ST6430

600

400

300

530

344

172

1

ST6825

600

800

250

530

744

122

2

ST6830

600

800

300

530

744

122

2

ST61025

600

1000

250

530

944

122

2

ST61030

600

1000

300

530

944

122

2 2

ST61230

600

1200

300

530

1144

122

ST81030

800

1000

300

730

944

122

2

ST81230

800

1200

300

730

1144

122

2

Freecall: 1800 007 458 Fax: 1300 885 122 www.eltechindsutries.com.au

INDUSTRIAL ENCLOSURES

ST CODE


Enclosure Catalogue 2012:Layout 1

26

16/4/12

3:05 PM

Page 26

INDUSTRIAL ENCLOSURES

Dimensions - STX Series - Single Door

STAINLESS STEEL BOX WITH SINGLE BLANK DOOR STX CODE STX2-315H STX3-415H STX3-420H STX4-420H STX4-520H STX4-620H STX5-520H STX5-725H STX6-420H STX6-620H STX6-625H STX6-630H STX6-820H STX6-825H STX6-830H STX6-1230H STX8-830H STX8-1030H STX8-1230H

BOX DIMENSIONS B 200 300 300 400 400 400 500 500 600 600 600 600 600 600 600 600 800 800 800

MOUNTING PLATE DIMENSIONS

A 300 400 400 400 500 600 500 700 400 600 600 600 800 800 800 1200 800 1000 1200

P 150 150 150 200 200 200 200 250 200 200 250 300 200 250 300 300 300 300 300

C 150 200 150 200 250 100 250 100 200 100 100 100 100 100 100 200 100 200 200

L 150 250 350 350 350 350 450 450 550 550 550 550 550 550 550 550 750 750 750

H 250 350 250 350 450 550 450 650 350 550 550 550 750 750 750 1150 750 950 1150

NR OF LOCKS 1 1 1 1 1 2 1 2 1 2 2 2 2 2 2 3 2 2 3

INDUSTRIAL ENCLOSURES

Dimensions - STX Series - Double Door

STAINLESS STEEL BOX WITH DOUBLE BLANK DOOR STX CODE B

BOX DIMENSIONS A

P

MOUNTING PLATE DIMENSIONS L

H

STX10-1030H

1000

1000

300

950

950

STX10-1230H

1000

1200

300

950

1150

Freecall: 1800 007 458 Fax: 1300 885 122 www.eltechindsutries.com.au


Enclosure Catalogue 2012:Layout 1

16/4/12

3:05 PM

Page 27

INDUSTRIAL ENCLOSURES

27

Dimensions - FPX Series - Single Door

FPX STAINLESS STEEL ENCLOSURE WITH SLOPED ROOF FPX CODE

BOX DIMENSIONS

CABLE ENTRY

MOUNTING PLATE

A

P

C

E

L

H

FPX4-515H

400

503

150

617

230

50

350

450

1

FPX4-620H

400

603

200

745

230

100

350

550

1

FPX5-730H

500

703

300

903

330

100

450

650

2

FPX6-825H

600

803

250

974

530

100

550

750

2

FPX8-1025H

800

1003

250

1174

530

100

750

950

2

FPX8-1030H

800

1003

300

1203

530

100

750

950

2

FPX8-1230H

800

1203

300

1403

530

100

750

1150

3

INDUSTRIAL ENCLOSURES

F

NR OF LOCKS

B

Freecall: 1800 007 458 Fax: 1300 885 122 www.eltechindsutries.com.au


Enclosure Catalogue 2012:Layout 1

28

16/4/12

3:06 PM

Page 28

INDUSTRIAL ENCLOSURES

Dimensions - Enux Series - Single Door

INDUSTRIAL ENCLOSURES

DIMENSIONAL SPECIFICATIONS WIDTH 600 600 600 600 600 600 800 800 800 800 800 800 1000 1000 1000 1000 1000 1000

DIMENSIONS HEIGHT 1800 1800 1800 2000 2000 2000 1800 1800 1800 2000 2000 2000 1800 1800 1800 2000 2000 2000

DEPTH 400 500 600 400 500 600 400 500 600 400 500 600 400 500 600 400 500 600

B* 600 600 600 600 600 600 800 800 800 800 800 800 1000 1000 1000 1000 1000 1000

CABINET DIMENSIONS A 1809 1809 1809 2009 2009 2009 1809 1809 1809 2009 2009 2009 1809 1809 1809 2009 2009 2009

P 414 514 614 414 514 614 414 514 614 414 514 614 414 514 614 414 514 614

FLOOR FIXING C D 395 271 395 371 395 471 395 271 395 371 395 471 595 271 595 371 595 471 595 271 595 371 595 471 795 271 795 371 795 471 795 271 795 371 795 471

CABLE ENTRY E F 365 240 365 340 365 440 365 240 365 340 365 440 565 240 565 340 565 440 565 240 565 340 565 440 347,5x2 240 347,5x2 340 347,5x2 440 347,5x2 240 347,5x2 340 347,5x2 440

DOOR SPACE M N 445 1630 445 1630 445 1630 445 1830 445 1830 445 1830 645 1630 645 1630 645 1630 645 1830 645 1830 645 1830 845 1630 845 1630 845 1630 845 1830 845 1830 845 1830

Freecall: 1800 007 458 Fax: 1300 885 122 www.eltechindsutries.com.au


Enclosure Catalogue 2012:Layout 1

16/4/12

3:06 PM

Page 29

INDUSTRIAL ENCLOSURES

29

Dimensions - Enux Series - Double Door B-51

P-65

54,5

24,5

5

N

24,5

54,5

A

M

M

P

B*

B-5

C

P-114

70

D F

13

E

E B-100

*Note: with side panels mounted, add 16mm

DIMENSIONAL SPECIFICATIONS WIDTH

DIMENSIONS HEIGHT

DEPTH

B*

CABINET DIMENSIONS A

P

FLOOR FIXING C D

CABLE ENTRY

DOOR SPACE

E

F

M

N

1800

400

1200

1809

414

995

271

447,5

240

445

1630

1200

1800

500

1200

1809

514

995

371

447,5

340

445

1630

1200

1800

600

1200

1809

614

995

471

447,5

440

445

1630

1200

2000

400

1200

2009

414

995

271

447,5

240

445

1830

1200

2000

500

1200

2009

514

995

371

447,5

340

445

1830

1200

2000

600

1200

2009

614

995

471

447,5

440

445

1830

INDUSTRIAL ENCLOSURES

1200

Freecall: 1800 007 458 Fax: 1300 885 122 www.eltechindsutries.com.au


Enclosure Catalogue 2012:Layout 1

30

16/4/12

Page 30

INDEX / PRICING

Part No

Price / $

Page

ETA - ST Series & Accessories

INDEX / PRICING

3:06 PM

SDWC-010 ST10-1030 ST10-1230 ST10-820 ST10-830 ST12-1230 ST2-315 ST3-315 ST3-320 ST3-415 ST3-420 ST3-515 ST3-520 ST4-315 ST4-320 ST4-420 ST4-520 ST4-525 ST4-620 ST4-625 ST5-520 ST5-525 ST5-720 ST5-725 ST6-1025 ST6-1030 ST6-1040 ST6-1230 ST6-420 ST6-620 ST6-630 ST6-640 ST6-820 ST6-825 ST6-830 ST6-840 ST8-1030 ST8-1040 ST8-1230 ST8-630 ST8-820 ST8-830 ST8-840 STPO145 STPO146 STPO157 STPO1610 STPO1612 STPO164 STPO166 STPO168 STPO1810 STPO1812 TT104-2 TT105-2 TT106-25 TT108-25 TT204-25 TT206-3 TT208-3

15.98 1,517.86 1,608.24 1,108.32 1,237.15 1,881.60 184.08 201.65 231.94 233.81 267.36 291.36 297.74 274.94 294.82 317.28 324.91 354.05 369.41 410.88 413.52 463.10 468.67 506.78 811.34 902.93 1,071.55 1,106.26 398.74 506.06 598.32 736.08 625.25 645.65 690.43 869.24 1,016.78 1,288.66 1,120.37 810.14 823.87 895.44 1,092.77 201.65 222.10 297.31 422.88 484.51 231.07 300.43 360.53 493.20 563.52 83.76 98.83 126.19 155.42 96.53 137.66 168.38

5&7 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 7 7 7 7 7 7 7 7 7 7 7 7 7 7 7 7 7

Part No

Price / $

WA060 WA980 WA981 WA982 WE235 WE285 WE288

29.38 52.85 53.50 56.23 21.84 60.19 68.64

Page 7 7 7 7 7 7 7

ETA - STX Series & Accessories SDXCX-101H STPO1-34XH STPO1-45XH STPO1-46XH STPO1-57XH STPO1-68XH STX10-1030H STX10-1230H STX2-315H STX3-415H STX3-420H STX4-315H STX4-420H STX4-520H STX4-620H STX5-520H STX5-725H STX6-1230H STX6-420H STX6-620H STX6-630H STX6-820H STX6-825H STX6-830H STX8-1030 STX8-1030H STX8-1230H STX8-830H TTX1-04H TTX1-05H TTX2-05H TTX1-06H TTX2-08H

68.64 643.20 691.20 768.00 1,027.20 1,248.00 5,059.20 6,072.00 744.00 955.20 1,041.60 960.00 1,180.80 1,344.00 1,536.00 1,545.60 2,001.60 3,772.80 1,512.00 1,977.60 2,246.40 2,448.00 2,616.00 2,716.80 2,803.25 4,200.00 4,440.00 3,744.00 $288.00 345.60 436.80 537.60 580.80

9 9 9 9 9 9 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 9 9 9 9 9

1,560.00 1,958.00 2,935.00 3,153.00 4,785.00 4,958.00 5,640.00

10 10 10 10 10 10 10

ETA - FPX Series FPX4-515H FPX4-620H FPX5-730H FPX6-825H FPX8-1025H FPX8-1030H FPX8-1230H

ETA - ENUX Series & Accessories ENUX061804PR ENUX061804SC ENUX061805PR ENUX061805SC ENUX061806PR ENUX061806SC ENUX062004PR ENUX062004SC

3,288.10 4,118.73 3,326.20 4,229.61 3,573.61 4,345.63 3,408.60 4,264.75

13 13 13 13 13 13 13 13

Part No

Price / $

ENUX062005PR ENUX062005SC ENUX062006PR ENUX062006SC ENUX081804PR ENUX081804SC ENUX081805PR ENUX081805SC ENUX081806PR ENUX081806SC ENUX082004PR ENUX082004SC ENUX082005PR ENUX082005SC ENUX082006PR ENUX082006SC ENUX101804PR ENUX101804SC ENUX101805PR ENUX101805SC ENUX101806PR ENUX101806SC ENUX102004PR ENUX102004SC ENUX102005PR ENUX102005SC ENUX102006PR ENUX102006SC ENUX121804PR ENUX121804SC ENUX121805PR ENUX121805SC ENUX121806PR ENUX121806SC ENUX122004PR ENUX122004SC ENUX122005PR ENUX122005SC ENUX122006PR ENUX122006SC EUFI040180 EUFI040200 EUFI050180 EUFI050200 EUFI060180 EUFI060200 EUKU-002 EUKU-003 EUPA-060180 EUPA-060200 EUPA-080180 EUPA-080200 EUPA-100180 EUPA-100200 EUPA-120180 EUPA-120200 EUPI060180 EUPI060200 EUPI080180 EUPI080200 EUPN-001800

3,447.00 4,382.14 3,519.76 4,555.04 3,511.60 4,326.68 3,561.67 4,485.60 3,744.36 4,598.32 3,698.10 4,574.43 3,748.40 4,703.72 3,831.90 4,886.77 4,289.40 5,189.52 4,335.10 5,308.17 4,514.95 5,445.30 4,556.60 5,482.05 4,602.20 5,606.37 4,702.40 5,806.43 5,067.80 6,010.41 5,116.60 6,132.07 5,339.97 6,258.30 5,297.20 6,256.07 5,345.90 6,392.82 5447.20 6,593.65 558.67 583.94 621.11 652.96 695.24 741.93 269.78 184.38 370.02 404.60 451.01 506.17 716.45 801.57 816.69 933.31 889.00 1,001.00 1,127.00 1,197.00 246.82

Page 13 13 13 13 13 13 13 13 13 13 13 13 13 13 13 13 13 13 13 13 13 13 13 13 13 13 13 13 13 13 13 13 13 13 13 13 13 13 13 13 13 13 13 13 13 13 14 14 14 14 14 14 14 14 14 14 14 14 14 14 14

Freecall: 1800 007 458 Fax: 1300 885 122 www.eltechindsutries.com.au


16/4/12

3:06 PM

Page 31

INDEX / PRICING

Part No

Price / $

EUPN-002000 EUZE-060401 EUZE-060501 EUZE-060601 EUZE-080401 EUZE-080501 EUZE-080601 EUZE-100401 EUZE-100501 EUZE-100601 EUZE-120401 EUZE-120501 EUZE-120601 WA050 WTGS-001 WTKB-002 WTSS-001

269.36 272.00 282.30 292.50 292.50 302.80 313.00 342.00 352.30 362.50 384.00 394.30 404.50 47.25 49.98 78.05 132.09

Page 14 13 13 13 13 13 13 13 13 13 13 13 13 14 14 13 14

ETA - SDV Series & Accessories SDPA-11 SDPA-22 SDPA-31 SDPA-32 SDPA-33 SDPA-42 SDPA-43 SDPA-44 SDPA-52 SDPA-53 SDPA-62 SDPA-63 SDPA-64 SDPA-82 SDPA-84 SDV1108 SDV1112 SDV2208 SDV2212 SDV3208 SDV3112 SDV3212 SDV3312 SDV4208 SDV4212 SDV4312 SDV4412 SDV5208 SDV5212 SDV5312 SDV6208 SDV6212 SDV6312 SDV6412 SDV8208 SDV8212 SDV8412 SDWC-010 SDWA-005

24.60 27.20 27.85 30.55 41.45 38.00 50.50 69.20 50.60 62.90 54.50 83.80 95.45 88.80 125.15 121.10 129.85 137.85 142.00 152.80 147.00 154.95 203.60 176.40 190.35 217.55 293.05 185.00 214.30 236.45 220.75 248.45 283.90 319.20 279.65 343.35 383.60 15.98 74.45

5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 5 5

536.85

5

ETA - SDX Series SDX1-108H

Part No

Price / $

SDX1-112H SDX2-208H SDX3-208H SDX3-312H SDX4-212H

609.30 657.00 769.50 932.40 886.50

Page 5 5 5 5 5

ALFA Electric - Climate Control ALFA500BPB ALFA1600BPB ALFA2300BPB ALFA2500BPB ALFA2600BPB ALFA3500BPB ALFA3600BPB ALFAA000BPB ALFA1000BPB ALFA2000BPB ALFA3000BPB FSHT250 SHT100 SHT25W SHT50W ETUH22 THR02 THRV22 THV02

236.00 265.00 354.09 511.00 825.00 832.00 1,081.70 32.80 38.00 99.90 137.64 614.00 310.00 162.00 182.00 852.00 84.00 144.00 84.00

21 21 21 21 21 21 21 21 21 21 21 21 21 21 21 21 21 21 21

Electtrocanali - Junction Boxes EC410C10 EC410C4R EC410C4 EC410C5 EC410C6 EC410C7 EC410C8 EC410C9 EC420C10 EC420C5 EC420C7 EC420C8 EC420C9 EC430C5 EC430C6 EC430C7 EC430C8 EC430C9 EC440C5 EC440C6 EC440C7 EC440C8 EC440C9 EC450P10 EC450P6 EC450P7 EC450P8 EC450P9 EC480C10 EC480C4 EC480C4R EC480C5 EC480C6

280.04 17.50 13.72 32.14 58.82 81.74 143.58 207.38 466.79 64.00 147.46 225.10 302.70 41.23 70.71 98.12 159.60 229.58 76.76 118.00 176.82 247.16 380.56 110.20 15.00 24.00 35.60 94.50 429.00 33.50 42.60 52.40 91.60

2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2&3 2&3 2&3 2&3 2&3 3 3 3 3 3

Part No

Price / $

EC480C7 EC480C8 EC480C9 EC490C5 EC490C6 EC490C7 EC490C8 EC490C9

136.80 205.00 287.00 73.80 124.90 160.00 230.00 291.40

3 3 3 3 3 3 3 3

$117.64 $86.72 $13.70 $20.16 $24.38 $30.32 $65.66 $21.00 $27.18 $35.66 $79.38 $40.40 $51.42 $86.72 $51.42 $55.06 117.64 86.72 13.70 20.16 24.38 30.32 65.66 21.00 27.18 35.66 79.38 40.40 51.42 86.72 51.42 55.06 58.94 9.60 13.96 22.90 24.26

19 19 19 19 19 19 19 19 19 19 19 19 19 19 19 19 18 18 18 18 18 18 18 18 18 18 18 18 18 18 18 18 18 18 18 18 18

31

Page

PVC Slotted Duct 100100NSD 10080NSD 2530NSD 2540NSD 2560NSD 2580NSD 40100NSD 4040NSD 4060NSD 4080NSD 60100NSD 6060NSD 6080NSD 80100NSD 8060NSD 8080NSD 100100SSD 10080SSD 2530SSD 2540SSD 2560SSD 2580SSD 40100SSD 4040SSD 4060SSD 4080SSD 60100SSD 6060SSD 6080SSD 80100SSD 8060SSD 8080SSD DL-100 DL-25 DL-40 DL-60 DL-80

DIN Rail & Accessories AUSR35/7.5 AUSR35/7.5S AUSR35/7.5AL AUSR35/7.5ALS AUSR35/15 AUSR35/15S AUSR32/G AUSR32/GS 1201099 SDS12 SDS16 SDS25

Freecall: 1800 007 458 Fax: 1300 885 122 www.eltechindsutries.com.au

16.14 19.06 29.36 38.46 29.36 35.18 29.36 35.18 18.44 107.22 146.00 183.50

20 20 20 20 20 20 20 20 20 20 20 20

INDEX / PRICING

Enclosure Catalogue 2012:Layout 1


Enclosure Catalogue 2012:Layout 1

TERMS & CONDITIONS

32

16/4/12

3:06 PM

Page 32

TERMS & CONDITIONS

1. Definitions 1.1 “Company” shall mean JA Arkcoll ATF Clancy Estate Trust and others T/A Eltech Industries and its successors and assigns. 1.2 “Customer” shall mean the Customer or any person acting on behalf of and with the authority of the Customer. 1.3 “Guarantor” means that person (or persons), or entity who agrees herein to be liable for the debts of the Customer on a principal debtor basis. 1.4 “Goods” shall mean Goods supplied by the Company to the Customer (and where the context so permits shall include any supply of Services as hereinafter defined). 1.5 “Services” shall mean all services supplied by the Company to the Customer and includes any advice or recommendations (and where the context so permits shall include any supply of Goods as defined supra). 1.6 “Price” shall mean the cost of the Goods as agreed between the Company and the Customer subject to clause 4 of this contract. 2. Acceptance 2.1 Any instructions received by the Company from the Customer for the supply of Goods and/or the Customer’s acceptance of Goods supplied by the Company shall constitute acceptance of the terms and conditions contained herein. 2.2 Where more than one Customer has entered into this agreement, the Customer’s shall be jointly and severally liable for all payments of the Price. 2.3 Upon acceptance of these terms and conditions by the Customer the terms and conditions are irrevocable and can only be rescinded in accordance with these terms and conditions or with the written consent of the manager of the Company. 2.4 None of the Company’s agents or representatives are authorised to make any representations, of the Company in writing nor is the Company bound by any such unauthorised statements. 2.5 The Customer undertakes to give the Company not less than fourteen (14) days prior written notice of any proposed change in the Customer’s name and/or any other change in the Customer’s details (including but not limited to, changes in the Customer’s address, facsimile number, or business practice). 3. Goods 3.1 The Goods are as described on the invoices and quotation as provided by the Company to the Customer. 4. Price And Payment 4.1 At the Company’s sole discretion; (a) The Price shall be as indicated on invoices provided by the Company to the Customer in respect of Goods supplied; or (b) The Price shall be the Company’s current Price, at the date of delivery of the Goods, according to the Company’s current Price list; or (c) The Price of the Goods shall (subject to clause 4.2) be the Company’s quoted Price which shall be binding upon the Company provided that the Customer shall accept in writing the Company’s quotation within fourteen (14) days. 4.2 Any variation from the plan of scheduled works or specifications will be charged for on the basis of the Company’s quotation and will be shown as variations on the invoice. Payment for all variations must be made in full at their time of completion. 4.3 Time for payment for the Goods shall be of the essence and will be stated on the invoice, quotation or any other order forms. If no time is stated then payment shall be on delivery of the Goods. 4.4 The Company may withhold delivery of the Goods until the Customer has paid for them, in which event payment shall be made before the delivery date. 4.5 At the Company’s sole discretion, for certain approved Customers payment will be due thirty (30) days following the date of the invoice. 4.6 Payment will be made by cash on delivery, or by cheque, or by bank cheque, or by credit card, or by direct credit, or by any other method as agreed to between the Customer and the Company. 4.7 The Price shall be increased by the amount of any GST and other taxes and duties which may be applicable, except to the extent that such taxes are expressly included in any quotation given by the Company 5. Delivery Of Goods / Services 5.1 Delivery of the Goods shall be made to the Customer’s address. The Customer shall make all arrangements necessary to take delivery of the Goods whenever they are tendered for delivery, or delivery of the Goods shall be made to the Customer at the Company’s address. 5.2 Delivery of the Goods to a carrier, either named by the Customer or failing such naming to a carrier at the discretion of the Company for the purpose of transmission to the Customer, is deemed to be a delivery of the Goods to the Customer. 5.3 The costs of carriage and any insurance which the Customer reasonably directs the Company to incur shall be reimbursed by the Customer (without any set-off or other withholding whatever) and shall be due on the date for payment of the Price. The carrier shall be deemed to be the Customer’s agent. 5.4 Where there is no agreement that the Company shall send the Goods to the Customer, delivery to a carrier at limited carrier’s risk at the expense of the Customer is deemed to be delivery to the Customer. 5.5 The Company may deliver the Goods by separate installments (in accordance with the agreed delivery schedule). Each separate installment shall be invoiced and paid for in accordance with the provisions in this contract of sale. 5.6 Delivery of the Goods to a third party nominated by the Customer is deemed to be delivery to the Customer for the purposes of this agreement. 5.7 The Customer shall take delivery of the Goods tendered notwithstanding that the quantity so delivered shall be either greater or less than the quantity purchased provided that; (a) such discrepancy in quantity shall not exceed 10%, and (b) the Price shall be adjusted pro rata to the discrepancy.

5.8 5.9

The failure of the Company to deliver shall not entitle either party to treat this contract as repudiated. The Company shall not be liable for any loss or damage whatsoever due to failure by the Company to deliver the Goods (or any of them) promptly or at all.

6. Risk 6.1 If the Company retains property in the Goods nonetheless, all risk for the Goods passes to the Customer on delivery. 6.2 If any of the Goods are damaged or destroyed prior to property in them passing to the Customer, the Company is entitled, without prejudice to any of its other rights or remedies under these Terms and Conditions of Trade (including the right to receive payment of the balance of the Price for the Goods), to receive all insurance proceeds payable for the Goods. This applies whether or not the Price has become payable under the Contract. The production of these terms and conditions by the Company is sufficient evidence of the Company’s rights to receive the insurance proceeds without the need for any person dealing with the Company to make further enquiries. 7. Customer’s Disclaimer 7.1 The Customer hereby disclaims any right to rescind, or cancel the contract or to sue for damages or to claim restitution arising out of any misrepresentation made to him by any servant or agent of the Company and the Customer acknowledges that he buys the Goods relying solely upon his own skill and judgement and that the Company shall not be bound by nor responsible for any term, condition, representation or warranty other than the warranty given by the Manufacturer which warranty shall be personal to the Customer and shall not be transferable to any subsequent Customer. 8. Defect/Returns 8.1 The Customer shall inspect the Goods on delivery and shall within seven (7) days of delivery notify the Company of any alleged defect, shortage in quantity, damage or failure to comply with the description or quote. The Customer shall afford the Company an opportunity to inspect the Goods within a reasonable time following delivery if the Customer believes the Goods are defective in any way. If the Customer shall fail to comply with these provisions, the Goods shall be conclusively presumed to be in accordance with the terms and conditions and free from any defect or damage. 8.2 For defective Goods, which the Company has agreed in writing that the Customer is entitled to reject, the Company’s liability is limited to either (at the Company’s discretion) replacing the Goods or repairing the Goods provided that: (a) the Customer has complied with the provisions of clause 8.1; (b) the Company will not be liable for Goods which have not been stored or used in a proper manner; (c) the Goods are returned in the condition in which they were delivered with all packaging material and accompanied by proof of purchase. (d) Goods must be accompanied by a GOODS RETURN FORM, which is included in this catalogue. 8.3 The Company may (in its discretion) accept the Goods for credit but this may incur a restocking fee of 20% of the value of the returned Goods plus any freight. 8.4 Goods made to special order, Customer specification, non-catalogue items or product cut to length are under no circumstances acceptable for credit or return. Cancellation of orders for special or non-catalogue items will definitely not be accepted, once these orders have been processed. 9. Lien 9.1 Where the Company has not received or been tendered the whole of the price, or the payment has been dishonoured, the Company shall have: (a) a lien on the goods; (b) the right to retain them for the price while the Company is in possession of them; (c) a right of stopping the goods in transit whether or not delivery has been made or ownership has passed; and (d) a right of resale, (e) the foregoing right of disposal, provided that the lien of the Company shall continue despite the commencement of proceedings or judgement for the price having been obtained. 10. The Commonwealth Trade Practices Act 1974 and Fair Trading Acts 10.1 Nothing in this agreement is intended to have the affect of contracting out of any applicable provisions of the Commonwealth Trade Practices Act 1974 or the Fair Trading Acts in each of the States and Territories of Australia, except to the extent permitted by those Acts where applicable. 11. Intellectual Property 11.1 Where the Company has designed or drawn Goods for the Customer, then the copyright in those designs and drawings shall remain vested in the Company, and shall only be used by the Customer at the Company’s discretion. 11.2 Conversely, in such a situation, where the Customer has supplied drawings, the Company in its sale conditions may look for an indemnity (the specifications and design of the Goods (including the copyright, design right or other intellectual property in them) shall as between the parties be the property of the Company). 11.3 Where any designs or specifications have been supplied by the Customer for manufacture by or to the order of the Company then the Customer warrants that the use of those designs or specifications for the manufacture, processing, assembly or supply of the Goods shall not infringe the rights of any third party. 11.4 Customer warrants that all designs or instructions to the Company will not cause the Company to infringe any patent, registered design or trademark in the execution of the Customers order. 12. Default & Consequences Of Default 12.1 Interest on overdue invoices shall accrue from the date when payment becomes due daily until the date of payment at a rate of 2.5% per calendar month and shall accrue at such a rate after as well as before any judgement.

Freecall: 1800 007 458 Fax: 1300 885 122 www.eltechindsutries.com.au


16/4/12

3:06 PM

Page 33

TERMS & CONDITIONS

12.2

12.3

12.4

12.5

If the Customer defaults in payment of any invoice when due, the Customer shall indemnify the Company from and against all the Company’s costs and disbursements including on a solicitor and own client basis and in addition all of the Company’s nominees costs of collection. Without prejudice to any other remedies the Company may have, if at any time the Customer is in breach of any obligation (including those relating to payment), the Company may suspend or terminate the supply of Goods to the Customer and any of its other obligations under the terms and conditions. The Company will not be liable to the Customer for any loss or damage the Customer suffers because the Company exercised its rights under this clause. If any account remains unpaid at the end of the second month after supply of the goods or services the following shall apply: An immediate amount of the greater of $20.00 or 10.00% of the amount overdue shall be levied for administration fees which sum shall become immediately due and payable. In the event that: (a) any money payable to the Company becomes overdue, or in the Company’s opinion the Customer will be unable to meet its payments as they fall due; or (b) the Customer becomes insolvent, convenes a meeting with its creditors or proposes or enters into an arrangement with creditors, or makes an assignment for the benefit of its creditors; or (c) a receiver, manager, liquidator (provisional or otherwise) or similar person is appointed in respect of the Customer or any asset of the Customer; then without prejudice to the Company’s other remedies at law (i) the Company shall be entitled to cancel all or any part of any order of the Customer which remains unperformed in addition to and without prejudice to any other remedies; and (ii) all amounts owing to the Company shall, whether or not due for payment, immediately become payable.

13. Title 13.1 It is the intention of the Company and agreed by the Customer that property in the Goods shall not pass until: (a) The Customer has paid all amounts owing for the particular Goods, and (b) The Customer has met all other obligations due by the Customer to the Company in respect of all contracts between the Company and the Customer, and that the Goods shall be kept separate until the Company shall have received payment and all other obligations of the Customer are met. 13.2 It is further agreed that: (a) The Customer shall not deal with the money of the Company in any way which may be adverse to the Company. (b) Until such time as ownership of the Goods shall pass from the Company to the Customer the Company may give notice in writing to the Customer to return the Goods or any of them to the Company. Upon such notice the rights of the Customer to obtain ownership or any other interest in the Goods shall cease. (c) If the Customer fails to return the Goods to the Company then the Company or the Company’s agent may enter upon and into land and premises owned, occupied or used by the Customer, or any premises as the invitee of the Customer, where the Goods are situated and take possession of the Goods, without being responsible for any damage thereby caused. (d) Receipt by the Company of any form of payment other than cash shall not be deemed to be payment until that form of payment has been honoured, cleared or recognised and until then the Company’s ownership of rights in respect of the Goods shall continue. (e) The Customer shall not charge the Goods in any way nor grant nor otherwise give any interest in the Goods while they remain the property of the Company. (f) The Company may require payment of the Price or the balance of the Price due together with any other amounts due from the Customer to the Company arising out of these terms and conditions, and the Company may take any lawful steps to require payment of the amounts due and the Price. (g) The Company can issue proceedings to recover the Price of the Goods sold notwithstanding that ownership of the Goods may not have passed to the Customer. (h) Until such time the Customer has the Company’s authority to convert the Goods into other products and if the Goods are so converted, the parties agree that the Company will be the owner of the end products. (i) Until such time the Customer has the Company’s authority to convert the goods into other products and if the goods are so converted, the parties agree that the Company will be the owner of the end products. 14. Security And Charge 14.1 Notwithstanding anything to the contrary contained herein or any other rights which the Company may have howsoever: (a) Where the Customer and/or the Guarantor (if any) is the owner of land, realty or any other asset capable of being charged, both the Customer and/or the Guarantor agree to mortgage and/or charge all of their joint and/or several interest in the said land, realty or any other asset to the Company or the Company’s nominee to secure all amounts and other monetary obligations payable under the terms and conditions. The Customer and/or the Guarantor acknowledge and agree that the Company (or the Company’s nominee) shall be entitled to lodge where appropriate a caveat, which caveat shall be released once all payments and other monetary obligations payable hereunder have been met. (b) Should the Company elect to proceed in any manner in accordance with this clause and/or its sub-clauses, the Customer and/or Guarantor shall indemnify the Company from and against all the Company’s costs and disbursements including legal costs on a solicitor and own client basis. (c) To give effect to the provisions of clause [14.1 (a) and (b)] inclusive hereof the

Customer and/or the Guarantor (if any) do hereby irrevocably nominate constitute and appoint the Company or the Company’s nominee as the Customer’s and/or Guarantor’s true and lawful attorney to execute mortgages and charges (whether registerable or not) including such other terms and conditions as the Company and/or the Company’s nominee shall think fit in his/her/its/their absolute discretion against the joint and/or several interest of the Customer and/or the Guarantor in any land, realty or asset in favour of the Company and in the Customer’s and/or Guarantor’s name as may be necessary to secure the said Customer’s and/or Guarantor’s obligations and indebtedness to the Company and further to do and perform all necessary and other acts including instituting any necessary legal proceedings, and further to execute all or any documents in the Company’s absolute discretion which may be necessary or advantageous to give effect to the provisions of this clause. 15. Cancellation 15.1 The Company may cancel these terms and conditions or cancel delivery of Goods at any time before the Goods are delivered by giving written notice. The Company shall not be liable for any loss or damage whatsoever arising from such cancellation. 16. Privacy Act 1988 16.1 The Customer and/or the Guarantor/s agree for the Company to obtain from a credit reporting agency a credit report containing personal credit information about the Customer and Guarantor/s in relation to credit provided by the Company. 16.2 The Customer and/or the Guarantor/s agree that the Company may exchange information about Customer and Guarantor/s with those credit providers named in the Application for Credit account or named in a consumer credit report issued by a reporting agency for the following purposes: (a) To assess an application by Customer; (b) To notify other credit providers of a default by the Customer; (c) To exchange information with other credit providers as to the status of this credit account, where the Customer is in default with other credit providers; and (d) To assess the credit worthiness of Customer and/or Guarantor/s. 16.3 The Customer consents to the Company being given a consumer credit report to collect overdue payment on commercial credit (Section 18K(1)(h) Privacy Act 1988). 16.4 The Customer agrees that Personal Data provided may be used and retained by the Company for the following purposes and for other purposes as shall be agreed between the Customer and Company or required by law from time to time: (a) provision of Services & Goods; (b) marketing of Services and or Goods by the Company, its agents or distributors in relation to the Services and Goods; (c) analysing, verifying and/or checking the Customer’s credit, payment and/or status in relation to provision of Services/Goods; (d) processing of any payment instructions, direct debit facilities and/or credit facilities requested by Customer; and (e) enabling the daily operation of Customer’s account and/or the collection of amounts outstanding in the Customer’s account in relation to the Services and Goods. 16.5 The Company may give, information about the Customer to a credit reporting agency for the following purposes: (a) to obtain a consumer credit report about the Customer; and or (b) allow the credit reporting agency to create or maintain a credit information file containing information about the Customer. 17. Unpaid Company’s Rights To Dispose Of Goods 17.1 In the event that: (a) the Company retains possession or control of the Goods; and (b) payment of the Price is due to the Company; and (c) the Company has made demand in writing of the Customer for payment of the Price in terms of this contract; and (d) the Company has not received the Price of the Goods, then, whether the property in the Goods has passed to the Customer or has remained with the Company, the Company may dispose of the Goods and may claim from the Customer the loss to the Company on such disposal. 18. General 18.1 If any provision of these terms and conditions shall be invalid, void or illegal or unenforceable the validity existence, legality and enforceability of the remaining provisions shall not be affected, prejudiced or impaired. 18.2 All Goods supplied by the Company are subject to the laws of Victoria and the Company takes no responsibility for changes in the law which affect the Goods supplied. 18.3 The Company shall be under no liability whatsoever to the Customer for any indirect loss and/or expense (including loss of profit) suffered by the Customer arising out of a breach by the Company of these terms and conditions. 18.4 In the event of any breach of this contract by the Company the remedies of the Customer shall be limited to damages. Under no circumstances shall the liability of the Company exceed the Price of the Services. 18.5 The Customer shall not set off against the Price amounts due from the Company. 18.6 The Company may license or sub-contract all or any part of its rights and obligations without the Customer’s consent. 18.7 The Company reserves the right to review these terms and conditions at any time and from time to time. If, following any such review, there is to be any change in such terms and conditions, that change will take effect from the date on which the Company notifies the Customer of such change. 18.8 Neither party shall be liable for any default due to any act of God, war, terrorism, strike, lock out, industrial action, fire, flood, drought, storm or other event beyond the reasonable control of either party.

Freecall: 1800 007 458 Fax: 1300 885 122 www.eltechindsutries.com.au

33

TERMS & CONDITIONS

Enclosure Catalogue 2012:Layout 1


Enclosure Catalogue 2012:Layout 1

34

16/4/12

3:06 PM

Page 34

GOODS RETURN FORM

Customer___________________________________________________________Date: ______________________________________ Contact Name: _____________________________________________________Phone:_____________________________________ ___________________________________________________________________Fax: _______________________________________

GOODS BEING RETURNED: Part No.

Description

Qty

Nett Price Charged

Total

SUB TOTAL

Reason for Return: Incorrectly Ordered by Customer GST

Not Ordered by Customer

TOTAL $

Incorrectly Supplied by Eltech Industries Other: ______________________________________________________________________ ____________________________________________________________________________ ____________________________________________________________________________ ____________________________________________________________________________

You are Requesting A:

Credit

Replacement

Details: Eltech Invoice No: ___________________________________________________Date: ______________________________________ Your Order No: ______________________________________________________Date: ______________________________________

ELTECH PRODUCTS OFFICE STAFF TO COMPLETE Attn: ___________________________________________________________________________________________________________ Your Return No. for the above is: __________________________________________________________________________________

GOODS RETURN FORM

Please return the above goods by: ________________________________________________________________________________ in its original packaging, and with the Return Number clearly marked on the outer packaging. Please note that this is not a guarantee that a credit will be issued. We will need to inspect the goods first. Goods received damaged or not in the original packaging will not be accepted for credit. We thank you for your kind co-operation. Eltech Customer Service Person:__________________________________________________________________________________ please print name Please return a copy of this form and the Eltech invoice with the goods being returned. Note: No goods will be received back for credit unless a GRA form and number are attached.

Freecall: 1800 007 458 Fax: 1300 885 122 www.eltechindsutries.com.au


Enclosure Catalogue 2012:Layout 1

16/4/12

3:06 PM

Page 35

35

NOTES

NOTES

Freecall: 1800 007 458 Fax: 1300 885 122 www.eltechindsutries.com.au


Enclosure Catalogue 2012:Layout 1

16/4/12

3:06 PM

Page 36

“Committed to Service�

Eltech Industries 8 Industry Court (P.O.Box 84) Lilydale, VIC, 3140, Australia Phone: (+61 3 ) 9737 2100 Fax: (+61 3) 9735 4588 Toll free: 1800 007 458 General Enquiries sales@eltechindustries.com.au www.eltechindustries.com.au

Enclosures  

Polycarbonate/ABS enclosures, PVC IP55 Enclosures, PVC IP56 Enclosures, Steel Terminal Boxes – Powder Coated, Stainless Steel Terminal Boxes...

Read more
Read more
Similar to
Popular now
Just for you