System 250 for crimping Cu and Al terminals

V250

Tested and certified crimp head for crimping Cu-terminals, type KRF/KSF 10-800 mm², Cu-windings 25-730 mm², Al-terminals 16-630 mm² (-300 solid). Used in conjunction with foot pump P4000 or the electrically powered pump PS710 (battery powered version of PS710E is also available).

Properties:

• working pressure 63 MPa (630 bar)

• crimp force 250kN (25 tons)

• large crimp area, 10-630 mm²

Crimp geometry

V250l

Tested and certified crimp head for crimping Cu-terminals, type KRF/KSF 10-800 mm², Cu-windings 25-730 mm², Al-terminals 16-630 mm² (-300 solid). Used in conjunction with foot pump P4000 or the electrically powered pump PS710 (battery powered version of PS710E is also available).

Properties:

• equipped with protective rubber coating on top of the fork and oil spray safety protection cap

• working pressure 63 MPa (630 bar)

• crimp force 250kN (25 tons)

• large crimp area, 10-630 mm²

Crimp geometry

Accessories for system 250

• The B (L) dies below are intended for Cu-terminals, type KR/KRF and KS/KSF, together with Cu winding conductors.

• Be sure to use dies exactly matching the terminal.

Pre-rounding of Cu

For pre-rounding copper winding conductors to fit the connector in question.

Crimp dies for Cu

Supplied in pairs. For hexagonal crimping of Cu terminals and connectors. May be used on flexible (class 5) as well as stranded (class 2) conductors and for winding conductors in Transformer manufacture.

Storage box for system 250

Case with space for tool V250L and all necessary accessories to crimp Elpress Cu-and Al-terminals. The case has a solid moulded interior and can be used as a storage place in storage rooms or taken into the workplace.

Properties:

• IP67 rated, withstands dust and heavy impacts

• sturdy, form cut inserts