Thank you for purchasing our product. Please read this User’s Manual before using the product. Change without Notice
4 /16 CH H.264 DVR User’s Guide
◆ CAUTION z Please read this user manual carefully to ensure that you can use the device correctly and safely z We do not warrant all the content is correct. The contents of this manual are subject to change without notice z This device should be operated only from the type of power source indicated on the marking label. The voltage of the power must be verified before using. If not in use for a long time, pull out the plug from the socket z Do not install this device near any heat sources such as radiators, heat registers, stoves or other device that produce heat z
Do not install this device near water. Clean only with a dry cloth
Do not block any ventilation openings. And ensure well ventilation around the machine
z Do not power off the DVR at normal recording condition! The correct operation to shut off DVR is to stop recording firstly, and then select “shut-down” button at the right of the menu bar to exit, and finally to cut off the power. z This machine is indoor using equipment. Do not expose the machine in rain or moist environment. In case any solid or liquid get into the machine’s case, please cut off the power supply immediately, and ask for qualified technicians to check the machine before restart z Refer all servicing to qualified service personnel. No any parts repaired by yourself without technical aid or approval.
1. Product Introduction • • • • • • • • • • • • • • • • • •
• • • • •
Real-time surveillance High resolution VGA output (Default) 2 way audio 3G Mobile surveillance(iPhone/ iPad/ Android/ Windows Mobile/ BlackBerry/ Symbian) Compression With latest H.264 video compression, better video quality and lower compression rate. Storage Support 1(4/8ch)or 2(16ch) SATA HDD（FAT32 file system） Data Backup With USB thumb drive or USB external DVD burner. Each backup file size is 128MB. Adjustable record resolution, frame rate and quality CIF real-time record or partial channel D1 real-time record Multi-record mode: manual, schedule, sensor and motion record. HDD recycle record. Single or Multi channel playback Record file lock protection 4/8/16 sensor input and 1 relay output Motion detection Pre and Post event record Channel related trigger record PTZ control Multi PTZ protocol support Programmable 128 Preset points and 8 cruises Related trigger preset point control Authority account setup (1 admin and 15 users account) USB mouse control To use USB mouse to control on friendly GUI Playback search mode: by time or event Event log and search Support network function Multi connection type: STATIC(Fixed IP)、DHCP、PPPoE Support DDNS Support event trigger to send E-mail Remote connection limitation Auto bandwidth adjustment by network status Support network remote control Remote record Remote playback Remote PTZ control Remote configuration Remote IE surveillance Remote CMS control Remote EMAP control Remote camera color adjustment Remote snapshot
1.2 Front Panel Definition
Front Panel for 4/8/16-ch DVR
Name REC Search +/Menu button -/Backup STOP/ESC IR Receiver Enter button Direction up/CH
Direction left/Rew Direction right/FF
Description 1. Record manually 2. Enter search mode 1. Increase the value in setup 2. Enter menu from live view 1. Decrease the value in setup 2. Enter backup mode from live view 1. Quit play mode 2. Exit the current menu or status 1. For remote control 2. To confirm the choice or setup 1. Direction up 2. single channel switch 1. Direction down 1. Change screen display, 4ch: single, 4 8ch: single, 4, 6, 9 screens 16ch: single, 4, 6, 9,16 screens 1. Direction left 2. playback rewind 1. Direction right 2. playback forward Definitions of Front Panel Buttons
1.3Rear Panel Instructions 4CH
Rear Panel for 4-ch
Name Video out Spot out Audio out P/Z K/B ALARM IN Video in VGA port LAN USB Com and GND Audio in POWER INPUT
Description Connect to monitor Connect to monitor as an AUX output channel by channel. Only video display, no menu show Audio output, connect to the sound box Connect to speed dome Connect to keyboard Connect to external sensor1-4 Video input channels from 1-4 VGA output, connect to monitor Network port For mouse and pan driver Com and Grounding 4 CH Audio input DC12V Definitions of Front Panel Buttons
Rear Panel for 8-ch
Name Video out Spot out Audio out Video in POWER INPUT FAN VGA port LAN USB P/Z K/B Com and GND ALARM IN Audio in
Description Connect to monitor Connect to monitor as an AUX output channel by channel. Only video display, no menu show Audio output, connect to the sound box Video input channels from 1-8 DC12V For cooling the device VGA output, connect to monitor Network port For mouse and pan driver Connect to speed dome Connect to keyboard Com and Grounding Connect to external sensor1-8 4 CH Audio input Definitions of Front Panel Buttons
The rear Panel interface for 16-ch is shown as Fig 2.10: Fig 錯誤! 所指定的樣式的文字不存在文件中。.10 Rear Panel for 16-ch Name Video out Spot out Audio out Video in POWER INPUT FAN VGA port LAN USB P/Z K/B Com and GND ALARM IN Audio in 5V
Description Connect to monitor Connect to monitor as an AUX output channel by channel. Only video display, no menu show Audio output, connect to the sound box Video input channels from 1-16 DC12V For cooling the device VGA output, connect to monitor Network port For mouse and pan driver Connect to speed dome Connect to keyboard Com and Grounding Connect to external sensor1-16 4 CH Audio input DC5V output
1.4 Remote control(Optional) ◆ This remote control use AAA battery, the definitation as following:
S/N 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15
Label Power INFO REC Digital Button Split Screen SEARCH MENU ENTER Direction Button +/Playback Control AUDIO SEQ BACKUP PTZ Control
Function System shut down Enter information page Manual record Enter digital or switch channel Switch split screen Enter search mode Enter Mode Enter Move item or PTZ direction Add or reduce value Playback control FF/REW/STOP/STEP Live audio switch Sequence Enter Backup mode Control PTZ Zoom/Focus/Iris/Speed
◆ Switch Remote Control ID Take remote control and point to DVR then continuously press “8”,”8”,”ID(0-65535)”,”Enter”. ＊The ID must be the same on DVR. ＊For example: If ID=1 , please take remote control and point to DVR then press 8,8,1,Enter.
1.5 Mouse Control ◆Connection: Please connect the USB mouse to USB port on the front or back panel. ◆Mouse functions： 1）Under LIVE mode： On every channel，you could double click the left button to switch FULL SCREEN and double click again to switch back to original split mode. On every channel，you could single click right button to popup MENU page. 2）Under MENU page： Single click left button on any functional icon could enter the function page and Single click right button to exit function page or jump back to previous page. If you want to key in letter or digit, please move mouse to textbox then single click left button on textbox. The virtual keyboard will pop up as following,
3）Under Backup mode： Single click left button to select item, single click right button to jump back to previous page. 4）Under PTZ mode： Single click left button to operate PTZ function, single click right button to jump back to previous page. -8-
3. Wizard setup 3.1 Wizard for language and time setup
Device Name: to set a name of DVR. Language: to set a proper language. Date Format: to set a proper display format of time. Time Format: to set 24 hour or 12 hour format to display.
Time Zone: to set proper time zone (Ex: US Eastern is GMT-5:00) ＊Caution: Please make sure to set time zone correctly. To prevent getting different timestamps between local and remote site. System Date: to set current system date time. Please click “next” to next wizard process.
3.2 Wizard for network setup
HTTP Port: Port for IE connection. (Default is 80) Server Port: Port for video and audio streaming. (Default is 6036) Obtain an IP address automatically (DHCP): Check this function to get network parameters automatically from a router or DHCP server. ＊If you check this function, please ignore all the parameter below. ＊You can check all network parameters on MENU > Information > Network.
＊[If you are using FIXED IP, please do not check this function and key in the following parameters manually. (Please contact your ISP to have the information.)] IP Address: FIXED IP Address. Subnet Mask: Subnet mask in this network environment. Gateway: Gateway in this network environment. Preferred DNS Server: Primary DNS in this network environment. Alternate DNS Server: Secondary DNS in this network environment.
＊If you are using PPPoE to connect internet, please click “next” to next step and setup PPPoE parameters on the Network page. Please click “next” to next wizard process.
- 10 -
3.3 Wizard for Record setup
You can setup record frame rate and quality for each channel and change record resolution. Adjustable parameter as following, Resolution: CIF or D1 Frame rate 1-30 (The MAX frame rate on CIF is 30, D1 is 7 for each channel.) Quality: Highest/ Higher/ Normal/ Low/ Lower/ Lowest If you want to change all channel setup at once, please click “All” then setup resolution, frame rate and quality at right hand side. Please click “next” to next wizard process.
3.4 Wizard for HDD setup
You can format HDD by using “Format” function. After HDD format completed, it will show “Normal” label on status.
＊Please make sure to backup all HDD data before you format the HDD. All HDD data will be erased after HDD formatted. Please click “Finish” to get into login page.
- 11 -
Compatible Devices 1.
Compatible USB drive after test. Brand A-DATA Transcend Kingston Toshiba SanDisk
Capacity 512MB, 1G, 2GB 4GB 2GB 2GB 4GB
2. Compatible external USB CD/DVD writers after test Brand Wyvo
- 12 -
3. Compatible HDD 4/8CH (Brand)
1T 1T 500G
10EURS, FW:630AB1 10EVDS, FW:63U8B0 5000AVJS, FW:63YJA0
160G 1T 500G 500G
1600AAJS, FW:00L7A0 ST31000528AS, FW:CC38 ST3500418AS, FW:CC38 HDP725050GLA360
15EARS, FW:00Z5B1 10EURS, FW:630AB1
160G 1T 160G 500G
1600AAJS, FW:00L7A0 ST3500418AS, FW:CC38 HDS721616PLA380 HDP725050GLA360
Western Digital (WD)
Western Digital (WD)
- 13 -