Page 1

Cylinders High Purity Water Produce up to 4.72m3/hr of high purity water

ELGA Process Water’s range of cylinders produce from 0.14 to 4.72 m3/hr of high purity water for a wide range of process water and general manufacturing applications. Often incorporated into centralised water purification systems or used in conjunction with deionisation or reverse osmosis equipment, they will sufficiently remove a wide range of impurities from both raw and deionised water supplies.

• Standard Deionisation Resin These Deionisers are designed for use as primary mixed bed units for the removal of all major ionic impurities

• ‘Hipex’ Grade Resin ‘Hipex’ resin is used as a Deionised water polisher to produce a treated water resistivity of >18MΩ-cm and a TOC level of <10ppb as C

• Activated Carbon These systems will effectively control organic carbon levels (TOC) and reduce chlorine, colour, taste and odour in an ultra-pure or process water system

• Adsorb Adsorb reduces the level of colloidal and heavy metal impurities, greatly increasing the life of the pre-filters used to protect reverse osmosis membranes

• Nuclear Grade Resin Highly regenerated new resin, will remove trace ionic impurities from water down to sub-parts-per-billion levels, to produce ultra-pure water with a resistivity better than 18MΩ-cm at 25°C. Its main application is a polisher to further purify Deionised water

• Carbon Dioxide Absorption Cylinders Carbon Dioxide absorption cylinders are designed to remove CO2 from the air passing into purified water tanks to prevent degradation of the conductivity of the water due to CO2 absorption • Organic Scavenging Specially selected anion resins remove naturally occurring organic compounds, e.g. humic and fulvic acids, to protect deionisation and reverse osmosis systems from organic fouling


CYLINDERS

Model 100 Series C118 Standard DI (Strong) C119 Standard DI (Weak) C140 Nuclear Grade Resin C160 Activated Carbon C168 Adsorb C170 ‘Hipex’ Resin 200 Series C124 Standard DI (Strong) C224 Standard DI (Weak) C240 Nuclear Grade Resin C250 Organic Scavenging C260 Activated Carbon C268 Adsorb C270 ‘Hipex’ Resin 500 Series C510 Standard DI (Strong) C500 Standard DI (Weak) C540 Nuclear Grade Resin C550 Organic Scavenging C560 Activated Carbon C568 Adsorb C570 ‘Hipex’ Resin 900 Series C910 Standard DI (Strong) C900 Standard DI (Weak) C940 Nuclear Grade Resin C950 Organic Scavenging C960 Activated Carbon C968 Adsorb C970 ‘Hipex’ Resin 1000 Series C1010 Standard DI (Strong) C1000 Standard DI (Weak) C1040 Nuclear Grade Resin C1050 Organic Scavenging C1060 Activated Carbon C1068 Adsorb C1070 ‘Hipex’ Resin C1080 Carbon Dioxide

l/h 140 140 140 140 140 140 220 220 220 220 220 220 220 400 400 400 400 400 400 400 620 620 620 620 620 620 620 940 940 940 940 940 940 940 15000

psi 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 2.5 2.5 2.5 7.5 0.5 5.0 2.5 7.5 7.5 2.5 5.0 2.0 7.0 2.5 N/A

l/h 420 420 630 420 350 700 660 660 990 530 660 440 1100 1200 1200 1800 960 1200 800 1800 1860 1860 2800 1240 2800 1240 3100 2835 2835 4250 2250 4250 1880 4725 20000

psi 10 10 10 10 10 10 12 12 20 15 11.5 15 25 30 30 60 20 25 20 60 12.5 12.5 10.0 5.0 6.0 10.0 12.5 30 30 22 7 15 10 25 N/A

Maximum Operating Pressure

psi 70 70 70 70 70 70 70 70 70 70 70 70 70 70 70 70 70 70 70 70 90 90 90 90 90 90 90 90 90 90 90 90 90 90

Maximum Operating Temperature

bar 4.8 4.8 4.8 4.8 4.8 4.8 4.8 4.8 4.8 4.8 4.8 4.8 4.8 4.8 4.8 4.8 4.8 4.8 4.8 4.8 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0

C 35 35 35 35 35 35 35 35 35 35 35 35 35 35 35 35 35 35 35 35 35 35 35 35 35 35 35 35 35 35 35 35 35 35 35 0

Atmospheric Atmospheric

Capacity Guidelines

Dimensions

Output (m3) mg/l Height impurities mm 163 710 336 710 306 710 144* 710 ** 710 306 710 360 1000 625 1000 675 1000 22 1000 270* 1000 ** 1000 675 1000 640 1000 1290 1000 1200 1000 35 1000 500* 1000 ** 1000 1200 1000 1000 1195 1875 1195 1875 1195 53 1195 750* 1195 ** 1195 1875 1195 1500 1600 2820 1600 2820 1600 84 1600 1130* 1600 ** 1600 2820 1600 47000** 1600

Diameter Weight mm kg 185 18 185 18 185 18 185 18 185 18 185 18 200 25 200 25 200 25 200 25 200 25 200 25 200 25 263 48 263 48 263 48 263 48 263 48 263 48 263 48 320 60 320 60 320 60 320 60 320 60 320 60 320 60 320 115 320 115 320 115 320 115 320 115 320 115 320 115 320 115

Note: *Application dependent * * Site tests required to establish capacity

Treated Water Quality

Conductivity μS/cm

Standard Deionisation (Strong)

‘Hipex’ Resin

Material Specifications

Residual Solids mg/l

Average pH Neutral

1.0 - 10

< 0.5

< 0.5

< 0.001

< 0.5

0.02 - 0.1

Not removed

Not removed

< 0.005

< 10

4 -7

1.0 - 0.055

10 - 18

< 0.01

< 0.01

< 0.001

< 0.1

Neutral

1.0 - 0.055

10 - 18

< 0.01

< 0.01

< 0.001

< 0.1

Neutral

ABS & GRP composite

Top Adapter

ABS Plastic

uPVC & ABS Plastic

ELGA Process Water Marlow International Parkway, Marlow Buckinghamshire SL7 1YL, UK tel. +44 (0) 1628 897000 fax. +44 (0) 1628 897001 email sales.uk@veoliawater.com www.elgaprocesswater.com

Carbon Dioxide Trace Disolved mg/l Metals mg/l

10 - 50

Vessel

Internals

Silica mg/l

1.0 - 0.1

Standard Deionisation (Weak) Nuclear Grade Resin

Resistivity MΩ-cm

ELGA Process Water Orbital House Redwood Square East Kilbride G74 5PR, UK tel. +44 (0) 1355 588140 fax. +44 (0) 1355 588141 email sales.uk@veoliawater.com www.elgaprocesswater.com

For higher flow rate applications consult ELGA Process Water

LITR36703 Rev D: 09/10. In keeping with the progressive nature of the company, we reserve the right to amend details without notice

System Performance & Dimensions: Minimum Maximum Flow/∆p Flow/∆p

ELGA Process Water Cylinders  

ELGA Process Water Cylinders

Read more
Read more
Similar to
Popular now
Just for you