Page 1

MidiRO™ Reverse Osmosis Systems Producing up to 800 litres/hr of high purity water

The ELGA Process Water MidiROTM Reverse Osmosis systems produce high purity water, removing up to 98% of dissolved inorganics and over 99% of large dissolved organics, colloids and particles. Flow rates from 90 to 800 l/hr

Features & Benefits

Applications

• Low Energy membranes result in lower operating pressures; cost savings

• Industrial Process Water

• Optimised flow: size ratio; space saving and efficient

• Boiler Feed • Cleaning and rinse water • Electronics

• 1 µm pre filtration included within unit; membrane protection

• Healthcare

• Programmable user interface; simple operation, monitoring and storage (14 days) of flow rate, conductivity and temperature values

• Oil and Gas

• Modem & RS232 connections • Dry run monitor; pump protection • Treated water diverted at startup; ensures water quality • Timed recirculation rinse; reduces membrane fouling

• Pharmaceuticals • Chemical Industry • Pulp and Paper Related Services

Our AQUAservice maintenance agreements are designed to allow you to choose from our wide range of capabilities the level of support you require to meet your application, operational and budgetary needs.

• Volt free contact alarm output

Hydrex Chemicals

• Alarm logging facility

Hydrex water treatment chemicals from ELGA Process Water should be used for optimised operation

Option

• Output to PLC via analogue signal for conductivity monitoring


MidiRO™ Model Nominal Flows at 12°C*

10-100 EP

10-200 EP

10-300 EP

10-500 EP

10-750 EP

Permeate

litres/hr

90-110

180-220

280-330

450-550

650-80

Feed

litres/hr

150

300

450

750

1000

%

70

70

70

70

70

%

96-98

96-98

96-98

96-98

96-98

kW

0.56

0.56

0.56

1.5

1.5

Nominal Recovery

Typical Salt Rejection Pump Motor Size

*Flow rates are dependent on feed water quality, those quoted are typical values based on 1000 mg/l TDS & SDI <3.

System Dimensions & Weights Model Height

Depth

Width

Weight

10-100 EP

10-200 EP

10-300 EP

10-500 EP

10-750 EP

mm

1010

1260

1260

1260

1260

mm

620

620

620

620

620

mm

600

600

600

600

600

kg

59

61

68

73

95

Feed Water Supply Quality Potable water free from organic contamination, chlorine and suspended matter. A softened water supply is normally required. Supply Pressure: Temperature:

min. 2 bar min. 2°C

max. 6 bar max. 25°C

Electrical Supply All models 230V 50Hz standard. For higher flow rate applications consult ELGA Process Water.

ELGA Process Water Marlow International Parkway, Marlow Buckinghamshire SL7 1YL, UK tel. +44 (0) 1628 897000 fax. +44 (0) 1628 897001 email sales.uk@veoliawater.com www.elgaprocesswater.com

ELGA Process Water Orbital House Redwood Square East Kilbride G74 5PR, UK tel. +44 (0) 1355 588140 fax. +44 (0) 1355 588141 email sales.uk@veoliawater.com www.elgaprocesswater.com

LITR 39003/Rev C: 09/10 In keeping with the progressive nature of the company, we reserve the right to amend details without notice

System Performance

ELGA MidiRO reverse osmosis datasheet  

The ELGA Process Water MidiROTM Reverse Osmosis systems produce high purity water, removing up to 98% of dissolved inorganics and over 99% o...

Read more
Read more
Similar to
Popular now
Just for you