Page 1

2019 COURSE CATALOG


General Information ABOUT THE HAVTECH LEARNING INSTITUTE

Havtech is the largest and most experienced commercial HVAC equipment, building automation systems, service and energy solutions provider in Maryland and the metro DC region. The Havtech Learning Institute offers HVAC professionals the opportunity to learn from leaders in the industry. Our training center, located in Columbia Maryland, is equipped with a hands-on training lab that provides an in-depth look at some of the systems that Havtech offers.

CANCELLATION POLICY

All payments are due upon registration. Once the student is enrolled in a course, the payment is processed and is non-refundable. However, if a student should need to cancel and reschedule their training, they may do so at no additional charge, as long as the change is made prior to the start of class. Name changes are also permitted at any time prior to the beginning of the class. Rescheduling and/or name changes will not be permitted after the class has begun. All class dates are subject to change. Havtech reserves the right to cancel any class if the minimum enrollment requirement is not met or in the event of inclement weather or illness. All students will be alerted as early as possible in the event of a cancellation. The student may then either register for the next available date for the same course, or they may request a refund.

TUITION

Tuition* for each course is per student, per course and all payments must be received upon enrollment in the class. Tuition includes course instruction, training materials, light breakfast and a catered lunch. Payments can be made by providing a purchase order, credit card, or business check. Tuition must be paid in full prior to the course taking place.

PRIVATE CLASSES

Private classes are also offered at Havtech. Courses can be structured based on your requests. To request a private class, please email training@havtech.com.

REGISTRATION

The Havtech Learning Institute Registration Form with available upcoming courses can be found at www.havtech.com/training. For questions and to pay with a credit card, please contact: training@havtech.com 443-367-9704

*Tuition fees are subject to change.


About the Trainers DON HINKLE

Technical Support & Training Manager Daikin Service Champion Don Hinkle has been working in the HVAC industry for over thirty years. As a field service technician, he developed an interest in the controls side of the industry and worked his way up to Senior Engineering Specialist with Siemens. In 2007, Don joined Havtech to lead the service division. In 2012 when Havtech started a controls division, Don transitioned into a new role as a Project Manager for Havtech Solutions. In his time at Havtech he has excelled in working with Daikin Equipment, earning the titles Daikin Controls Specialist and Daikin Certified Trainer. He is also start up and repair certified by AAON, Annexair and Eaton.

MICHAEL HIRSCHBOCK VRV Technical Support Manager

Michael Hirschbock has been in the HVAC industry for over twenty years. Beginning with a vocational program in high school, his career path has taken him through many aspects of the industry. Starting as a Service Helper he advanced to Service Mechanic, Installer, Foreman, Instructor, and Service Manager, while always having a passion to help others gain knowledge and advance in the trade. In the seven years prior to him starting at Havtech, he was the Service Manager for a design build contractor and has been a part of the installation of many Daikin heat pump and heat recovery projects. In addition to his many Daikin product certifications, Mike is also certified in multiple other manufacturers’ products, and is always growing his knowledge to provide outstanding customer support and training to every Havtech customer.


Daikin VRV® IV Install

*

This course is part of the prerequisite for the Daikin VRV Service and Troubleshooting course.

COURSE OUTLINE: • • • • • • • • • •

Daikin Introduction & History VRV Mechanics VRV IV Features Introducing VRT! Refrigerant Piping VRV IV Product & Technology Review Installation Procedures D-III Net Controls & Circuits Multi-Zone Control Systems Hands On Activities & Practice

Certification

No

Time

8 hours

Class Size

Limited to 20 students

Pre / Post Requirements

At the end of this two day course, students will be able to log in to their Daikin University accounts to access their certificates of completion.

Cost

$300 per student. Includes Daikin manuals and literature, hands on training, light breakfast and a catered lunch.

RECOMMENDED ATTENDEES: •

Installers

Service Mechanics

Start-Up Mechanics

Any individual responsible for piping/coordinated drawings

Estimators (Lead) to properly bid


Daikin VRV® IV Commissioning

*

This course is part of the prerequisite for the Daikin VRV Service and Troubleshooting course.

COURSE OUTLINE: VRV IV Commissioning: • VRV IV System Components • Outdoor Unit Layout • Pre-Commissioning Checks • System Commissioning Checks • Selected Field Settings, Outdoor & Indoor Units • Remote Controller Field Settings • Daikin eQuip • Dr. Daikin VRV IV Configurator: • Software installation • Cable Connections • Starting the Software • View & Edit the Field Settings • Uploading the Field Settings • Downloading the Field Settings • Viewing the Downloaded Settings

Certification

No

Time

16 hours (2 days)

Class Size

Limited to 20 students

Pre / Post Requirements

At the end of this two day course, students will be able to log in to their Daikin University accounts to access their certificates of completion.

Cost

$500 per student. Includes Daikin manuals and literature, hands on training, light breakfast and a catered lunch.

RECOMMENDED ATTENDEES: •

Service Mechanics

Start-Up Mechanics

Commissioning Agents


Daikin VRV® Service & Troubleshooting

*

Prerequisite: Daikin VRV IV Install and Daikin VRV IV Commissioning

COURSE OUTLINE: • • • • • • •

Understand Basic Operation Principles at Each Stage of Operation Wiring Schematics & VRV Components Demonstrate Refrigerant Flow Software & How to Use for Diagnostics How to Trace Refrigerant Flow Learn Advanced Field Settings Learn Advanced Troubleshooting Using Daikin Service Checker Hands On Activities & Practice

Certification

No

Time

2 days (16 hours)

Class Size

Limited to 12 students

Pre / Post Requirements

Prerequisites: VRV IV Install & Commissioning, taken within the past 2 years. This 16hr class is mandatory prior to purchasing a Daikin Service Checker. At the end of this two day course, students will be able to log in to their Daikin University accounts to access their certificates of completion.

Cost

$800 per student. Includes Daikin manuals and literature, hands on training, light breakfast and a catered lunch.

RECOMMENDED ATTENDEES: •

Service Mechanics

Start-Up Mechanics


Daikin VRV® Controls Install & Commissioning

*

Prerequisite: Daikin VRV IV Install and Daikin VRV IV Commissioning

COURSE OUTLINE: • • • • • • •

Product Introduction Control Theory Installation Requirements Centralized Controller Startup & Commissioning Procedures intelligent Touch Controller - Startup & Configuration Gateways - BACnet - LON Hands On Activities Using Controls Simulators

Certification

No

Time

2 days (16 hours)

Class Size

Limited to 12 students

Pre / Post Requirements

Prerequisites: VRV IV Install & Commissioning, taken within the past 2 years. At the end of this two day course, students will be able to log in to their Daikin University accounts to access their certificates of completion.

Cost

$800 per student. Includes Daikin manuals and literature, hands on training, light breakfast and a catered lunch.

RECOMMENDED ATTENDEES: •

Controls Contractors


Daikin intelligent Touch Manager (iTM) Commissioning

*

Prerequisite: Daikin VRV IV Install and Daikin VRV IV Commissioning

COURSE OUTLINE: • •

• •

iTM Introduction - iTM Overview - Hardware Specifications iTM Installation - iTM - iTM Plus Adapter (option) - DIII-NET Wiring iTM Commissioning - Before Start of Commissioning - Basic Commissioning Flow from iTM Touch Screen iTM Control Functions - Schedule - Setback - Timer Extension - Auto-Changeover iTM Commissioning Options - Using Preset Tool - Web Access for Commissioning - Editing .CSV File for Management Points - Wago

Certification

No

Time

8 hours

Class Size

Limited to 12 students

Pre / Post Requirements

Prerequisites: VRV IV Install & Commissioning, taken within the past 2 years. At the end of this two day course, students will be able to log in to their Daikin University accounts to access their certificates of completion.

Cost

$300 per student. Includes Daikin manuals and literature, hands on training, light breakfast and a catered lunch.

RECOMMENDED ATTENDEES: •

Controls Contractors


Daikin Controls Integrator

COURSE OUTLINE: • • • • • • •

• •

VRV System Overview Daikin DIII-Net Architecture - BACnet & LON database - Group Addressing Daikin Multi-Zone Controllers Indoor Unit sequence of operation Skyair & Mini-Split Integration BACnet Objects - Format & Points List Programming Functions - Setpoint Range - Auto Changeover - Setback -Scheduling Programming Scenarios - Full Control - Monitor Only - intelligent Touch Controller & Gateway Operation Gateways - BACnet & LON Point Verification Hands-On Activities - BACnet Setup - LON Communication Verification

Certification

No

Time

6 hours

Class Size

Limited to 20 students

Pre / Post Requirements

At the end of this two day course, students will be able to log in to their Daikin University accounts to access their certificates of completion.

Cost

$300 per student. Includes Daikin manuals and literature, hands on training, light breakfast and a catered lunch.

RECOMMENDED ATTENDEES: •

Controls Contractors


Daikin VRV® Owner / User Training

COURSE OUTLINE: • • • • •

Daikin Product & Technology Review System Models & Types Basic Control System & Operation Control Wiring & DIII Net Communications Hands On Activities & Practice - intelligent Touch Manager - intelligent Touch Controller - Navigation Controller

Certification

No

Time

8 hours

Class Size

Limited to 12 students

Pre / Post Requirements

None

Cost

$250 per student. Includes Daikin manuals and literature, hands on training, light breakfast and a catered lunch.

RECOMMENDED ATTENDEES: •

Building Engineers

Building Managers


AAON Controls

COURSE OUTLINE: •

Controls Overview VCM-X & VCB-X HVAC Controllers Component Wiring Communication GPC-X & Lighting Controllers Hands On Activities & Practice

Certification

No

Time

8 hours

Class Size

Limited to 12 students

Pre / Post Requirements

None

Cost

$500 per student. Includes manuals on USB drive, hands on training and a light breakfast and a catered lunch.


Eaton DH1 VFD Certification Training

COURSE OUTLINE: • • • • • • •

DH1 Overview Installation requirements, including power and control wiring Pre-power, power-on and operational checks and inspections Advanced programming, including software navigation and customer interface General Purpose, Industrial and HVAC specific applications overview Completion of startup reporting and handoff of equipment to the customer Certification testing

Certification

No

Time

8 hours

Class Size

Limited to 20 students

Pre / Post Requirements

None

Cost

FREE - Includes manuals on USB drive, hands on training and a light breakfast and a catered lunch.

Profile for ejanney

Havtech Learning Institute Course Catalog  

Havtech Learning Institute Course Catalog  

Profile for ejanney