Issuu on Google+

Test equipment calibration is crucial to guard the very important device towards influences of hostile situations which can make it inaccurate. This tool may be used in procedures involving expensive infrastructure as well as safety systems demanding tight tolerance limits. Moreover slight change can cause faulty measurement causing foundering of the processes and even resultant loss of property. Any non-calibrated meter will yield ambiguous reading for really vital measurement systems.

What calibration aims to report? Calibration services examine the test equipment to an accepted standard, possessing an accuracy at-least 10 times greater than the instrument. It involves utilizing "National Institute of Standards and Technology" traceable standard. Calibration aims to correct instruments that have dropped out of calibration and even creating misleading measurement. Small calibration errors signify the reading was well within tolerance limit still calibration focused on restoring "dead-on" accuracy. Gross errors means the device has transgressed the tolerable limits and furthermore meter reading is extremely inaccurate.

Why the necessity of regular calibration arises?


Due to effects of time: The prominent aspects of test instrument for instance input dividers, voltage references, current shunts etc are vulnerable to outcomes of time and register minor shifts over time. This shifting spells no difficulties if calibration services are widely used according to fixed routine. However a good inadvertent hard dropping of current clamp, for instance, can hit the equipment "out of cal" resulting in gross calibration errors. An accidental exposure of DMM (Digital Multimeter) to present overload can render it inaccurate. Some users think that these impacts won't affect the inputs owing to their breaker-protected nature. However, such protective devices could possibly fail to trip in response to abrupt, momentary changes in voltage or current. A massive voltage input can leap over the protective device completely. Test equipment calibration will set right this sort of errors and as well bring back the sanctity of measurements.

For top quality guarantee: Calibration fine-tunes the test equipment and guarantees secure plus reliable use to acquire correct examination outcomes through extremely sensitive products. This is a quality assurance exercise.


To keep up accuracy: Test equipment manufacturer describes a calibration interval for strict conformity to keep up the accuracy of critical dimensions. Calibration must be carried out before any large-scale critical measurement project for instance taking a plant down. Calibrated equipment must be unused just before embarking on measurements.

Right after project completion: Once the critical measuring project has been executed, the test instruments has to be sent to calibration services post testing to understand that the result's unalloyed plus trustworthy.

After an event: If the tool was subjected to a hit, for example internal overload getting disturbed or the unit consumed a high impact, test equipment calibration is required to check the ethics of it.


To follow specifications: Some projects mandate use of certified, calibrated test equipment only. To make sure system efficiency: Annual calibration needs to be carried out of equipment that is deployed for carrying out very important as well as noncritical measurements to ensure techniques carry on smoothly.

Annual calibration: It's cost-effective to subject your test equipment to calibration services at long durations if the equipment is rarely used to perform critical measurements plus the meter is not subjected to an event.

Assures confidence: Regular calibration lets you use your test equipment with confidence.

RSCalibration Services

1047 Serpentine Lane, Suite 500, Pleasanton, CA 94566, Contact Here: (925) 462-4217


Understanding the Need for Equipment Calibration