doubleshoulderpad

Page 1

camera & dslr rigs


Double Shoulder Pad The real balance is here.

edelkrone速 double shoulder mount can be used in two different ways. You can transform the shoulder mount from single to double shoulder in a few seconds. If you will be carrying the camera load on your body for longer durations double shoulder is perfect for the job. If you will be taking the camera on and off you all the time, single shoulder is there for you too. So you are covered in all cases.


in depth features


A DREAM COME TRUE • • • • •

Drastically increase the amount of your shooting duration Maximize the stability of your shots Achieve smooth pans Go hands free to make adjustments on the setup Prevent back pain and/or back injuries

To put the double shoulder setup on and off you is a breeze.

MODULA 9 w/ follow focus


in depth features

READY TO TAKE ON THE WORLD

IT FITS YOU PERFECTLY

The plate on the back of the double shoulder features connection holes for Anton Bauer and Sony IDX type batteries as well as several 1/4 and 3/8 screw holes and slots for our unique stainless steel counter-balance weights. The comfortable padding takes the shape of your shoulders and prevents blood stream blocking. Adjustments are completely instant and tool free.

The front and back adjustment on the shoulder mount makes it possible to fine tune the balance of the rig on shoulders. The shoulder curve and distances are all calculated perfectly to give you the best comfort.


THE HEALTH RISKS OF CONSISTENTLY CARRYING UNBALANCED CAMERA RIGS ON YOUR BODY Working consistently with an unbalanced shoulder rig for the camera operators can be a source of considerable pain. Some cameraman, in fact, suffer with severe pain, deteriorating posture, and are at risk for spinal deformity and other repetitive stress injuries to the shoulders and upper extremities due to their unbalanced camera rigs. These problems result from changes in the normal anatomical structure caused by the unbalanced weight on the shoulder and weak

muscular support. Camera operators tend to lean on their sides in order to make the load of the camera closer to their spines and this abnormal posture will possibly put pressure on an area of the upper body even more than acceptable rates. When this occurs, a bundle of nerves and blood vessels can become compressed and cause pain and discomfort down the upper extremities.

the normal curve of the upper and mid-back region but will potentially also cause severe low back pain and in the long run it may leave permanent distortions on your spine.

Consistently carrying camera equipment on shoulder not only can cause a reduction in

IMPORTANT EXPLANATION ABOUT WHY SOME UNBALANCED RIGS ARE STILL CALLED AS “BALANCED” In order to avoid any stress, pain, short mid or long term structural deformation on your spine when carrying loads of camera equipment, the centre of gravity of the load should be as close as possible to your spinal cord. In the classic way of camera carrying, the load is usually concentrated on just the single side of spinal cord and this causes an unbalanced weight carrying experience. So far this was the only method in the world to carry camera equipment on body and even though it has unbalanced, unhealthy features as

explained previously, it is still called as “balanced” which causes lots of misleading. The main reason why some camera rigs are labelled as “balanced” even though they were not, was because they at least managed to achieve front to back balance on the body by attaching counter balance weights on the backside of the camera. This approach does not help to relieve the stress on the spine (in fact it increases it) but at least it helps the arms to carry less load and hence longitude the stamina of them drastically. However usage of such “balanced” setups

for long durations of times consistently causes extreme stress and pain on the spinal cord and the only way to overcome this is to introduce the side to side balance in addition to the front and back balance to the camera rig design. This has just been recently possible with edelkrone®. And it is now possible to carry the camera load on body in total balance. This new advancement is the one and only true key aspect of achieving healthy camera operation.


BECOME THE CENTER OF ACTION

in depth features

With this design the counterbalance weights are on the opposite side. This is how cross balancing is made possible. You will be right in the center of action. Stability increases, pans and tilts becames magically fluid.

IT’S LIKE CARRYING A BACKPACK

True-Balance system distributes the weight evenly on both shoulders. This way you prevent the risks of injuries that may be caused by the consistent carrying of the heavy camera equipment on your body. You will not get tired as easily and this will extend the amount of uninterrupted working time you will have.

q

q

q

MODULA 9 w/ follow focus, accessory connector and cheese plate



in depth features


This brochure may contain products that may be subject to content or design changes. edelkrone® reserves the right to make necessary changes to the design, color, form or specification prior to delivery period. The rendered illustrations are based on actual design models. There may be accessories and items of optional equipment which are not part of standard setup options. Colors may differ from the shown illustrations. This brochure provides a general indication of the range of edelkrone® products, features and accessories. For current and more specific information in relation to the product features, customized setup options, or pricing you should contact your local edelkrone® dealer. If no dealer is available in your region, you can always contact edelkrone® directly for further information. edelkrone® respects the intellectual property of others. This brochure is solely designed to introduce edelkrone® products. All other trademarks mentioned (Canon®, Nikon®, Sony® IDX™, Anton Bauer®) are trademarks of their respective owners. edelkrone® contact line: + 90 537 700 0 700 email: info@edelkrone.com web: www.edelkrone.com address: Angora Evleri Tasplak Cad 2 Beysukent Ankara TURKEY


Turn static files into dynamic content formats.

Create a flipbook
Issuu converts static files into: digital portfolios, online yearbooks, online catalogs, digital photo albums and more. Sign up and create your flipbook.