Page 1

OVENS


OVENS A PART OF OUR WIDE PRODUCT RANGE Complete powder coating plants • Complete wet paint plants Pretreatment plants • Drying and curing ovens Conveyor systems • Control panels • Paint spray booths Fresh- and wastewater treatment • Cooling and flash-off zones Process ventilation systems

Conveyor ovens AABO ovens can be used for a variety of purposes: • • • • • •

Water drying Pre-heating of workpieces Paint drying Curing of powder coating and/or wet painting Technical heat finishing High temperature finishing

can be heated using: • Gas • Oil • Electricity

Box ovens

• Suitable with manual or Power & Free conveyor systems • Can be used as standalone units • Available for use at several temperature points up to 550 oC • Convection principle • Direct or indirect heating • Available as: “A” oven / Door oven

• Suitable for semi- or fully automatic conveyor systems • Available for use at several temperature points up to 250 oC • Convection principle • Direct or indirect heating • Available as: “A” oven / “Sluice” oven / Door oven

Dip ovens

• Suitable for manual or automatic crane systems • Available for use at several temperature points up to 250 oC • Convection principle • Direct or indirect heating • Available as: Door oven


ENERGY- AND ENVIRONMENTALLY FRIENDLY SOLUTIONS AABO’s design and system solutions that can be offered as part of our finishing system: “Combined oven” principle • “Floating” inner chamber with a minimum of overhead suspension points Extraction heat from curing oven recycled for water drying • Optimised combustion and ventilation units Optimised internal heat convection • All motors comply with IEC standards • Frequency control of motors Optimum insulation thickness according to process temperature • Heat recovery systems

AABO’s ovens have all been designed and produced using the latest technology. They have all been produced to achieve optimum energy efficiency and maximum protection of the environment. AABO always focuses on designing and supplying customer-specific solutions. This means that our ovens can be designed and produced in many different ways. AABO has since 1980 supplied different oven solutionsall tailored specifically to customer requirements.

EXAMPLE OF CONVEYOR- AND BOX OVEN

Direct heating

Indirect heating

• “Combined oven” principle • Layer-structured insulation: 0-100 oC 100mm 100-250 oC 310mm 250-550 oC 450mm • “Floating” internal core with a minimum of contact points • Heating sources: Gas - direct / indirect Oil - indirect Electricity • Convection- and IR (infrared) ovens • Possibility for replacement of insulating materials • Optimal air distribution throughout the oven, which guarantees  minimal temperature difference throughout the ovens inside space • Optimal use of energy • Optimal heat transfer • Bottom or side heat injection • All motors comply with IEC standards • Adjustable air ducts in the floor or in the sides • Modular construction


www.aabo.dk

Since 1980, E. Aabo Andersen A/S - also known as AABO has developed and produced advanced finishing plants for businesses all over the world. Today we are one of the leading and most innovative Danish companies within finishing plants powder as well as wet paint. We design and manufacture every finishing plant from our modern factory in Svendborg, Denmark exactly according to the customer’s desires and individual needs and requirements.

AABO’s skilled and experienced mechanical supervisors take care of assembly and start-up of the plant, as well as training of your operating personnel. We are also on hand to service our plants and components.

E. Aabo Andersen A/S . Finlandsvej 6 . DK-5700 Svendborg . Denmark . Phone +45 62 22 00 11 . www.aabo.dk . aabo@aabo.dk

Ovens brochure UK  
Ovens brochure UK