Issuu on Google+

CATALOGUE Valid from 1 January 2013

Profiles for public premises | Inspection and access hatches| Impact guards, handrails and support handles


DionePro - high-quality products for professional use First-rate DionePro products are designed for professional use in particular, which makes it easy to create impressive general impressions with minor but significant details in tones. Ordering our standard products is easy by using the product’s specific product code. Samples of most of our products are available on order and enable you to decide whether they fit in with the rest of your interior decoration. • Profiles for public premises • Inspection and access hatches as well as wall and ceiling access hatches • Handrails and impact guards

DUURI OY Tapulikaupungintie 35 PL 26, 00750 Helsinki FINLAND

D-PROFILE AB Kabelvägen 10 55302 Jönköping SWEDEN

D-PROFILE AS Tollbugata 105 3041 Drammen NORWAY

Tel. +358 9 351 050 Fax +358 9 3510 5222

Tel. +46 36 186 363 Fax +46 36 186 366

Tel. +47 93 06 58 68 /DionePro Tel. +47 90 47 06 30 /Dione

duuri@duuri.fi

info@d-profile.se

info@d-profile.no

SIA D-PROFILE Rīgas iela 6 LV-2114 Olaine LATVIA

ООО «ДЮРИ ПРОФАЙЛ РУС» 143362 Москва РОССИЯ г.Апрелевка, Сентябрьская ул., д.12

Tel. +371 677 83 506 Fax +371 677 83 508 info@d-profile.lv

Тел. +7 495 982 3875 Факс: +7 495 982 3875 duuri@duuri.ru


Contents 7 PROFILES 9 Cover strips 9 11 11 13 15 17 17

Stainless steel cover strips CPL-coated cover strips Stainless steel T-profiles Edge trims Metal skirtings Curved profiles Custom-made profiles

18 Corner profiles 18 Stainless steel corner profiles 19 Aluminium corner protection profiles

21 Stair edge profiles for hard use 21 Stainelss steel stair edge profiles 23 Big stair edge profiles with screws or glue fastenings

27 Gradus -stair edgings 28 29 30 31 33 35 38 41

Types of stair edging Fabrications Colour chart - channel colours Colour chart - insert colours XT-range aluminium Traditional aluminium Trans-edge -heavy-duty stair edgings Traditional PVC-U hardnose

43 Expansion joint profiles for flooring materials 43 Expansion joint profiles 44 Structural expansion joint profiles

47 Tiling profiles 47 49 51 51

Tiling profiles, round model Tiling profiles, square model Tiling stair edge profiles Tiling edge trims

53 Ramps with level difference 55 Column collars 55 Anti-slip adhesive tapes

57 INSPECTION AND ACCESS HATCHES 58 59 60 60 61 61 62 63 63 64 66 68 69 71 73 74 76 77 78 81 82 84 88 90 92 93 95

Wall and ceiling cover plates New inspection door set designed for walls and ceilings Thermally insulated inspection doors Inspection doors Fire-proof wall hatches Fire-proof wall-mounted inspection door with thermal insulation Inspection doors for walls and ceilings Fire-proof inspection doors for walls and ceilings Acoustic inspection doors Access covers BV-steel access covers BV-shallow steel and BVE shallow stainless steel access covers BV-F90 -steel access covers BV aluminium access covers BVE-stainless steel access covers BVA-SL slim alu CLA-aluminium access covers CCA-aluminium access covers BVS-access covers BV-GD and BVE-GD -access covers BV-GDZ -access covers BVH-access covers HL-galvanised access covers RVE- and RV -access covers RVA-access covers BR-access covers BVA row access covers

101 HANDRAILS AND IMPACT GUARDS 103 Vinyl-coated handrails 107 Clip-fastened vinyl impact guards 109 Plastic-framed vinyl-coated corner protection profiles 111 Vinyl sheets for walls 113 Colour map 115 Shopping trolley shelters 116 Corner protection profiles for parking halls 117 Impact guards for parking halls 117 Impact guards for marine traffic 119 Wooden handrails 121 Floor profiles for the visually impaired

106 FREQUENTLY ASKED QUESTIONS 107 DUURI OY’S SALES AND DELIVERY TERMS


www.dionepro.fi

PROFILES FOR PUBLIC PREMISES 7

Profiles for public premises When you need elegant and reliable solutions.

Quality DionePro profiles made of stainless steel are designed for public premises and withstand extremely hard use. Stylish and strong materials preserve their fresh and modern look for a long time. Our selection includes a wide variety of impressive and durable profile options. All DionePro profiles are tested for wear and tear in accordance with our quality system. We also make every effort to ensure that the delivery speed of our products is excellent, and the products are safe and easy to install. All our tested standard products with different mounting methods are, in no time at all, available to customers from our warehouse, which makes their installation easy and cost-effective. We also make custom-made special profiles.


8

PROFILES FOR PUBLIC PREMISES

www.dionepro.fi


www.dionepro.fi

PROFILES FOR PUBLIC PREMISES 9

Durable finish

COVER STRIPS Public premises are most often provided with glue or screw-mounted cover strips. The cover strips separate different materials and put the finishing touches to expansion joints. Standard strips with a width of 30–120 mm are directly available from stock.

STAINLESS STEEL COVER STRIPS FOR PUBLIC PREMISES Material: made of ground stainless steel suitable for public premises. Material thickness 1.5 mm. Fastening: screw or glue mounting. We recommend fastening the glue-mounted strips with assembly glue. Cutting: strips are shortened with a wheel fit for cutting stainless steel. The wheel is attached to an angle grinder. A small number of profiles can be cut with a hacksaw. Applications: offices, hotels, schools, shopping centres and other public premises where no hard-wheeled pallet jacks are used.

COVER STRIPS

Curved surface

Ridged centre

Ridged edges

Width/type

Length

Product code

S/O

30 mm, curved surface, without holes

300 cm

7093005-R

S

30 mm, ridged centre, without holes

300 cm

7094605-R,

S

38 mm, aluminium/stainless steel, without holes

270 cm

B2 AS 270-R

O

40 mm, ridged centre, without holes

300 cm

7094505-R

S

40 mm, ridged edges, with holes

90 cm

A4 RST 90

S

40 mm, ridged edges, with holes

180 cm

A4 RST 180

S

40 mm, ridged edges, with holes

300 cm

7095305

S

40 mm, ridged edges, without holes

300 cm

7095305-R

S

45 mm, aluminium/stainless steel, plugmounted

270 cm

K1 AS 270

O

50 mm, ridged edges, without holes

300 cm

7094405-R

S

50 mm, ridged edges, with holes

300 cm

7094405

S

60 mm, ridged edges, without holes

90 cm

A5 RST 90

O

60 mm, ridged edges, without holes

180 cm

A5 RST 180

O

60 mm, rridged edges, without holes

300 cm

7094905-R

S

60 mm, ridged edges, with holes

300 cm

7094905

S

70 mm, ridged edges, without holes

300 cm

7095005-R

S

70 mm, ridged edges, with side holes

300 cm

7095015

S

80 mm, ridged edges, without holes

90 cm

A6 RST 90-R

S

80 mm, ridged edges, without holes

180 cm

A6 RST 180-R

S

80 mm, ridged edges, without holes

300 cm

7094805-R

S

80 mm, ridged edges, with holes

300 cm

7094805

S

90 mm, ridged edges, without holes

300 cm

7095105-R

S

100 mm, ridged edges, without holes

90 cm

A7 RST 90-R

S

100 mm, ridged edges, without holes

180 cm

A7 RST 180-R

S

100 mm, ridged edges, without holes

300 cm

7091005-R

S

120 mm, ridged edges, without holes

90 cm

A8 RST 90-R

S

120 mm, ridged edges, without holes

180 cm

A8 RST 180-R

S

120 mm, ridged edges, without holes

300 cm

70941205-R

S

**S = IN STOCK

O= ORDER PRODUCTE


10 PROFILES FOR PUBLIC PREMISES

www.dionepro.fi


www.dionepro.fi

CPL-COATED COVER STRIPS FOR PUBLIC PREMISES Material: made of CPL-coated oak imitation aluminium profile fit for public premises. Fastening: plug mounting. Applications: offices, hotels, schools, shopping centres and other public premises where no hard-wheeled pallet jacks are used.

CPL-COATED COVER STRIPS Width/type

Colour Length

Product code

S/O

45 mm CPL cover strip

Oak

K2 OA 270

S

*S = IN STOCK

270 cm

O= ORDER PRODUCT

STAINLESS STEEL T-PROFILES Width/type

Colour Length

Product code

S/O

14 mm, ground stainless steel

RST

250 cm

14615

O

14 mm, glossy stainless steel

RST

250 cm

14625

O

25 mm, ground stainelss steel

RST

250 cm

14715

O

25 mm, glossy stainless steel

RST

250 cm

14725

O

*S = IN STOCK

O= ORDER PRODUCT

PROFILES FOR PUBLIC PREMISES 11


12 PROFILES FOR PUBLIC PREMISES

www.dionepro.fi


www.dionepro.fi

PROFILES FOR PUBLIC PREMISES 13

EDGE TRIMS Material: made of ground stainless steel suitable for public premises. Material thickness 1.5 mm. An option made of stainless steel coated aluminium is also available. Fastening: screw or glue mounting. We recommend using the Duuri assembly glue for the fastening of gluemounted profiles. Cutting: trims are shortened with a wheel fit for cutting stainless steel. The wheel is attached to an angle grinder. Applications: offices, hotels, schools, shopping centres and other public premises where no hardwheeled pallet jacks are used. EDGE TRIMS Width/type

Length

Product code

S/O

level difference 4.5 mm, ridged edges, with holes, width 32 mm

300 cm

7092205

S

level difference 0–12 mm, curved surface, without holes, width 40 mm

300 cm

7090405-R

S

level difference 8–15 mm, curved surface, without holes, width 50 mm

300 cm

7090905-R

S

level difference 0–12 mm, aluminium/stainless steel, without holes, width 40 mm

270 cm

B3 AS 270-R

S

*S = IN STOCK

O= ORDER PRODUCT


14 PROFILES FOR PUBLIC PREMISES

www.dionepro.fi


www.dionepro.fi

PROFILES FOR PUBLIC PREMISES 15

METAL SKIRTINGS Metal skirtings are an inexpensive and easy option for ground stainless steel profiles. Elegant column collar skirtings are made to order from L-shaped skirtings. Material: made of stainless steel or aluminium suitable for public premises. Installation: profiles are fastened with glue, mounting clips or bottom profiles. Cutting: profiles are shortened with a wheel fit for cutting stainless steel. The wheel is attached to an angle grinder. A small number of profiles and aluminium skirtings can be shortened with a hacksaw. Applications: offices, hotels, schools, shopping centres and objects in other public premises.

METAL SKIRTINGS Width/type

Length

Product code

S/O

40 x 10 mm, L-model, ground stainless steel

300 cm

JL RST 40 Hi 0,8

S

60 x 10 mm, L-model, ground stainless steel

300 cm

JL RST 60 Hi 0,8

S

40 x 10 mm, clip-mounted model, ground stainless steel

300 cm

JL RST 40-JOHTO

S

Outside corner for JL RST 40-JOHTO profile

RST -Johto U-Kulma

S

End piece, left, for JL RST 40-JOHTO profile

RST-Johto V-p채채ty

S

End piece, left, for JL RST 40-JOHTO profile

RST-Johto O-p채채ty

S

Stainless steel

ALUMIINI 40 x 12 mm, LJ-model, silver-anodised

300 cm

JL SI 40

S

40 x 12 mm, LJ-model, stainless steel anodised

300 cm

JL AS 40

S

40 x 12 mm, LJ-model, stainless steel anodised

300 cm

JL NG 40

S

60 x 12 mm, LJ-LJ model, graphite-anodised

300 cm

JL SI 60

S

60 x 12 mm, LJ-model, stainless steel anodised

300 cm

JL AS 60

S

60 x 12 mm, LJ-model, graphite-anodised

300 cm

JL NG 60

S

45 x 16 mm, beam model, silver-anodised

250 cm

CS1 SI 250

S

45 x 16 mm, beam model, white

250 cm

CS1 WH 250

S

60 x 16 mm, beam model, silver-anodised

250 cm

CS2 SI 250

S

60 x 16 mm, beam model, white

250 cm

SC2 WH 250

S

*S = IN STOCK

Aluminium, beam model

O= ORDER PRODUCT

L model, stainless steel

Clip-mounted model, stainless steel

Aluminium, LJ model


16 PROFILES FOR PUBLIC PREMISES

www.dionepro.fi


www.dionepro.fi

PROFILES FOR PUBLIC PREMISES 17

CURVED PROFILES Curved cover strips are used in points where the floor surface material changes to provide the floor with impressive details. Regular curves are bent in accordance with a radius. If the radius is irregular, an accurate model must be prepared and the strip bent in accordance with it. Material: made of ground stainless steel or brass suitable for public premises. Material thickness 1.5 mm. Bending a variety of extruded brass profiles to a curve is also possible. Consult our sales department for more information about the bending of profiles. Fastening: countersunk holes are drilled to the profiles at the installation stage and the profiles are fastened with suitable screws. Cutting: both ends of all profiles have a 10 cm unbent section that is shortened from the most suitable point before fastening the profiles. The profiles are shortened with a hacksaw or a wheel fit for cutting stainless steel. The wheel is attached to an angle grinder. Applications: offices, hotels, schools, shopping centres and objects in other public premises. In addition to standard profiles, we make a number of custom-made profiles, such as bathroom thresholds, inside and outside corner protection profiles with different angles, as well as cover strips and skirtings of different size and design. CURVED PROFILES The minimum bending radii for cover strips to be bent*

S/O

GROUND BRASS or STAINLESS STEEL Profile width 30 mm - minimum bending radius R=300

O

Profile width 40 mm - minimum bending radius R=500

O

Profile width 50 mm - minimum bending radius R=1500

O

EXTRUDED BRASS Profile width 30 mm - minimum bending radius R=300

O

Profile width 40 mm - minimum bending radius R=1500

O

Profile width 50 mm - minimum bending radius R=15000

O

*The minimum radii for edge and stair edge profiles vary case by case. Please consult our sales department for additional information!

CUSTOM-MADE PRODUCTS Material: made of ground or glossy steel or brass suitable for public premises. Edge grinding: grinding profile edges at the manufacturing stage removes the sharp edges caused by the cutting of profiles. Examples: in addition to standard profiles, we make a wide variety of custom-made profiles, such as bathroom thresholds, inside and outside corner strips with different angles, and cover strips and skirtings of different size and design. Cutting: profiles are cut with a hacksaw or shortened with a wheel fit for cutting stainless steel. The wheel is attached to an angle grinder. Applications: offices, hotels, schools, shopping centres and objects in other public premises.

Custom-made thresholds

Custom-made corner protection profiles

Custom-made cover strips and skirtings


18 PROFILES FOR PUBLIC PREMISES

www.dionepro.fi

CORNER PROFILES STAINLESS STEEL CORNER PROFILES Protect against dents and wear and tear Material: made of bright annealed or ground stainless steel suitable for public premises. Material thickness 1.0 mm. Fastening: profiles are fastened with Elasticfix tape. The profile’s pre-installed adhesive tape saves installation time and the costs. The backing of the adhesive tape is removed and the profile is pressed in place. If the outer corner is not straight, glue Cutting: profiles are shortened with a wheel fit for cutting stainless steel. The wheel is attached to an angle grinder. A small number of profiles can be cut with a hacksaw. Applications: offices, hotels, schools, shopping centres and outer corners in other public premises. Other materials: Corner protection profiles, size 30 x 30 mm, are also available in aluminium (colours: silver-anodised, white, beech, cherry, light cherry, oak, wenge and walnut).

CORNER PROFILES, STAINLESS STEEL Width/type

Length Product code

S/O

20 x 20 mm, ground surface

270 cm

B20 RST 270

S

20 x 20 mm, bright annealed surface

300 cm

7300135

S

30 x 30 mm, ground surface

90 cm

B8 RST 90

S

30 x 30 mm, ground surface

270 cm

B8 RST 270

S

30 x 30 mm, aluminium/stainless steel

270 cm

B8 AS 270

S

30 x 30 mm, ground surface

300 cm

7303335

S

30 x 30 mm, bright annealed surface

300 cm

7301135

S

40 x 40 mm, ground surface

300 cm

7300000

O

40 x 40 mm, bright annealed surface

300 cm

7300002

O

50 x 50 mm, ground surface

270 cm

B9 RST 270

S

50 x 50 mm, ground surface

300 cm

7333335

S

50 x 50 mm, bright annealed surface

300 cm

7311135

S

60 x 60 mm, ground surface

300 cm

7300003

O

60 x 60 mm, bright annealed surface

300 cm

7300004

O

80 x 80 mm, ground surface

300 cm

7300005

O

80 x 80 mm, bright annealed surface

300 cm

7300006

O

100 x 100 mm, ground surface

300 cm

7300007

O

100 x 100 mm, bright annealed surface

300 cm

7300008

O

*S = IN STOCK

O= ORDER PRODUCT


www.dionepro.fi

PROFILES FOR PUBLIC PREMISES 19

ALUMINIUM CORNER PROTECTION PROFILES Material: stove-enamelled, anodised or wood imitation coated aluminium. Profile length: 300 cm (wood imitation coated: 270 cm). Fastening: profiles are fastened with Elasticfix tape. The profile’s pre-installed adhesive tape saves installation time and the costs. The backing of the adhesive tape is removed and the profile is pressed in place. If the outer corner is not straight, glue must be used as an additional reinforcement. Cutting: profiles are shortened with a hacksaw or circular saw. Applications: offices, hotels, schools, shopping centres and outer corners in other public premises.

CORNER PROTECTION PROFILES, aluminium Width/type

Length

Product code

S/O

30 x 30 mm, oak

270 cm

B8 TA 270

S

30 x 30 mm, beech

270 cm

B8 PY 270

S

30 x 30 mm, walnut

270 cm

B8 PH 270

S

30 x 30 mm, cherry

270 cm

B8 KI 270

S

30 x 30 mm, light cherry

270 cm

B8 VKI 270

S

30 x 30 mm, wenge

270 cm

B8 WE 270

S

30 x 30 mm, white

300 cm

7303031-W

S

30 x 30 mm, silver-anodised

300 cm

7303032

S

20 x 20 mm, nordic graphite

270 cm

B20 NG 270

S

30 x 30 mm, nordic graphite

270 cm

B8 NG 270

S

50 x 50 mm, nordic graphite

270 cm

B9 NG 270

S

*S = IN STOCK

O= ORDER PRODUCT


20 PROFILES FOR PUBLIC PREMISES

www.dionepro.fi


www.dionepro.fi

PROFILES FOR PUBLIC PREMISES 21

STAIR EDGE PROFILES FOR HARD USE IN PUBLIC PREMISES DionePro stair edge profiles are an impressive solution for public premises. They are well suited to shopping centres, airports, hotels, offices, hospitals, and stairways in other public premises, for example. Another option is a stair edge profile with LEDs fit for cinemas and restaurants, for example.

STAINLESS STEEL STAIR EDGE PROFILES STAIR EDGE PROFILES, stainless steel Width/type

Length

Product code

S/O

35 x 25 mm, smooth surface

300 cm

7352505-R

S

40 x 25 mm, embossed surface

250 cm

7352605-R

S

42,5 x 23,5 mm, grooved surface

300 cm

7523105-R

S

50 x 30 mm, embossed surface

250 cm

7352705-R

S

80 x 30 mm, embossed surface

250 cm

7352805-R

S

*S = IN STOCK

Askelkulmalistojen erilaiset karhennusvaihtoehdot v채hent채v채t liukastumisriski채 julkisten tilojen portaikoissa.

O= ORDER PRODUCT

Grooved surface

Smooth surface

Embossed surface


22 PROFILES FOR PUBLIC PREMISES

www.dionepro.fi


www.dionepro.fi

PROFILES FOR PUBLIC PREMISES 23

BIG STAIR EDGE PROFILES WITH SCREWS OR GLUE FASTENINGS Secure your steps with Dione stair edge or antislip profiles. Protected stair edges give a sharp, clean appearance and are easy to maintain.

BIG STAIR EDGE PROFILES screws and glue fastenings Colour

Length

Product code

S/O

STAIR EDGE 42 x 22 mm, ridged Gold anodized

90 cm

D7 KE 90

S

Gold anodized

180 cm

D7 KE 180

S

Gold anodized

270 cm

D7 KE 270

S

Chrome anodized

90 cm

D7 KR 90

S

Chrome anodized

180 cm

D7 KR 180

S

Chrome anodized

270 cm

D7 KR 270

S

Bronze anodized

90 cm

D7 PE 90

S

Bronze anodized

180 cm

D7 PE 180

S

Bronze anodized

270 cm

D7 PE 270

S

Polished aluminium

270 cm

7523101-R

S

Gold anodized

270 cm

7523103-R

S

Brass

270 cm

7523104

S

Bronze anodized

270 cm

7523106-R

S

Chrome anodized

270 cm

7523109-R

S

BID STAIR EDGE PROFILES, screw and glue fastenings

STAIR EDGE WITH ANTI-SLIP INSERT 42 x 18 mm, ridged

STAIR EDGE WITH ANTI-SLIP INSERT 42 x 18 mm, ridged Polished aluminium

270 cm

7093201

S

Gold anodized

270 cm

7093203

S

Brass

270 cm

7093204

S

STAIR EDGE WITH ANTI-SLIP INSERT 42 x 34 mm, ridged Polished aluminium

270 cm

7092701

S

Gold anodized

270 cm

7092703

S

STAIR EDGE 50 x 22 mm, ridged Polished aluminium

320 cm

729201

S

Brass

320 cm

729204

T

STAIR EDGE WITH ANTI-SLIP INSERT 42 x 34 mm, ridged

ASKELKULMA 50 x 22mm, ridged, drilled

STAIR EDGE 55 x 43 mm, ridged, undrilled

STAIR EDGE 55 x 43 mm, ridged, drilled

STAIR EDGE 55 x 43 mm, ridged Brass

500 cm

7095554

S

Brass

500 cm

7095554-R

S

Polished aluminium

270 cm

7095501

S

Polished aluminium

270 cm

7095501-R

S

Gold anodized

270 cm

7095503

S

Gold anodized

270 cm

7095503-R

S

7555001

S

STAIR EDGE 55 x 50 mm, ridged Polished aluminium

*S = IN STOCK

320 cm

O= ORDER PRODUCT STAIR EDGE WITH ANTI-SLIP INSERT 55 x 50 mm, ridged


24 PROFILES FOR PUBLIC PREMISES

www.dionepro.fi

BIG STAIR EDGE PROFILES WITH SCREWS OR GLUE FASTENINGS

Colour

Length

Product code

S/O

STAIR EDGE 56 x 47 mm, ridged Silver anodized

320 cm

7564702

S

Silver anodized

320 cm

7564702-R

S

Gold anodized

320 cm

7564703

S

Gold anodized

320 cm

7564703-R

S

STAIR EDGE 56 x 47 mm, ridged

STAIR-EDGE WITH ANTI-SLIP INSERT 55 x 50 mm, ridged Polished aluminium

320 cm

7555001

S

STAIR-EDGE WITH ANTI-SLIP INSERT 60 x 35 mm, ridged Polished aluminium

320 cm

7603501

STAIR-EDGE WITH ANTI-SLIP INSERT 55 x 50 mm, ridged

S

STAIR-EDGE WITH ANTI-SLIP INSERT 67 x 30 mm, smooth Polished aluminium

320 cm

7093301

S

Brass

320 cm

7093304

S

Black

25 m

7093301-1

S

Black, ridged

25 m

7093204-001

S

Black, smooth

25 m

7093204-002

S

Beige, smooth

25 m

7093204-003

S

Brown, smooth

25 m

7093204-136

S

ANTI-SLIP PRODUCTS

*S = IN STOCK

STAIR-EDGE WITH ANTI-SLIP INSERT 67 x 30 mm, ridged

O= ORDER PRODUCT ANTI-SLIP Black, ridged

ANTI-SLIP Black, smooth

ANTI-SLIP Black, smooth


www.dionepro.fi

PROFILES FOR PUBLIC PREMISES 25


26 PROFILES FOR PUBLIC PREMISES

www.dionepro.fi


www.dionepro.fi

GRADUS STAIR EDGINGS • Provide slip-resistance at the edge of the step • Highlight the step edge to reduce accidents • Provide a colour contrast for a change in floor level • Protect the step edge • Protect the floorcovering • Reduce maintenance costs • Improve the aesthetics of a building • Present a professional appearance

PROFILES FOR PUBLIC PREMISES 27


28 PROFILES FOR PUBLIC PREMISES

www.dionepro.fi

TYPES OF STAIR EDGING Elite™

Traditional

Trans-Edge®

Key features

Key features

Key features

Key features

• Aluminium or PVC-u Hardnose

• Aluminium or Bronze

• Aluminium, Chrome, Bronze or PVC-u Hardnose

• Aluminium

XT™

• F actory bonded extended insert design ensures maximum safety underfoot • Locking mechanism secures insert in place • R  ecess to accommodate floorcovering ensures secure fit of profile to step

• Insert supplied separately to the channel offering a neat, concealed fixing and eliminating the need for screw head cover plugs • Mechanical lock for insert

• • F actory bonded inserts supplied with capping plugs to conceal screw heads after fixing •

T EX range: Factory bonded inserts with visible fixings T E range: Factory bonded inserts with capping plugs to conceal screw heads after fixing


www.dionepro.fi

PROFILES FOR PUBLIC PREMISES 29

FABRICATIONS Curvings Special shapes, welded returns and curves can be manufactured for most stair edgings and Stairtile. Stair edgings that can be curved are shown with a below the stair edging. Orders for curving should include a detailed template which is subject to approval by Gradus International.

Welded corners Welded corners are designed to form a neat and attractive edge around the open end of a step by concealing the edge of the floorcovering and stair edging. Welded corners are manufactured from side trims and are supplied in stocked sizes of 355mm x 355mm in 83Ëš and 90Ëš angles. Other sizes and angles are also available subject to approval by Gradus. Side trims can be used on their own to finish off floor edges on landings and are supplied in stocked lengths of 2.75m (2.00m for chrome).

TA66

Aluminium

TA50

MT42

PVC-u Metallic

TA42 TA2C Aluminium

Aluminium

TA2CTAC42

Chrome Finish Aluminium Bronze Aluminium

TA5

TC25 clip Steel

42

5 41

5

TA1

25

Aluminium

25

42

2.5 42

41 50

16 25

2.75

2.75

TP32 pvc

4

BT42

2.75

42 32 25

TA5

6.5 3.5 50

5 10

5 18

18 18

TA5B

TA5C Aluminium Aluminium

19

32 32

32 32

4

4

HT44 PVC-u

10 18

TA5C

Aluminium

3.5 5 19

65

1919

4

4

7

TA5B Aluminium Aluminium

PVC-u

PVC-u pvc 16

6.5 2.5 19 16

HT44 HT38 PVC-u

HT38 TP32 4

Aluminium TA1 10 Aluminium

7

Aluminium

4

5 19 32

4


30 PROFILES FOR PUBLIC PREMISES

www.dionepro.fi

Colour chart - channel colours Channel options: • Aluminium • Bronze • Chrome • PVC-u • Metallic PVC-u • Flexible Pvc

Channel

Brown

Ink

wn

Burgundy

Midnight

uebell

Granite

Metals

Evergreen

Dove

Aluminium Aluminium (Mill Finish)

Bronze

LRV: 67.66

LRV: 63.00

Bronze

Aluminium (Chrome Finish) LRV: 49.79

Glacier

Canvas

PVC-u hardnose® - Satin Finish Snowdrift

Black

Ink

Midnight

Burgundy

Evergreen

Brown

LRV: 4.99

LRV: 5.40

LRV: 6.77

LRV: 5.89

LRV: 6.63

LRV: 7.15

NCS: 8502-B

NCS: 8010-R70B

NCS: 6030-R80B

NCS: 6030-R10B

NCS: 7020-B70G

NCS: 6010-Y70R

Nutmeg

Bluebell

Granite

Dove

Glacier

Canvas

LRV: 13.21

LRV: 9.76

LRV: 11.69

LRV: 26.19

LRV: 42.73

LRV: 55.43

NCS: 6020-Y80R

NCS: 5030-R90B

NCS: 6502-R

NCS: 5000-N

NCS: 2502-B

NCS: 2005-Y30R

Linen Granite

Buttercup

Snowdrift

Clay

Sky

Duckegg

Jade

LRV: 37.50

LRV: 62.62

LRV: 80.54

LRV: 55.38

LRV: 51.46

LRV: 55.54

NCS: 8502-B

NCS: 1070-Y

NCS: S1515-R90B

NCS: S2010-B10G

NCS: S2005-G

Dove

NCS: 0500-N

LRV: 51.53 Snowdrift

NCS: S2502-Y

PVC-u hardnose® - Metallic Finish Burnt Almond

Burnt Almond

Zinc Zinc

Doubloon

Doubloon

Silver Silver

LRV: 9.92

LRV: 15.91

LRV: 22.01

LRV: 48.29

NCS: 7010-Y50R

NCS: 6005-R80B

NCS: 4020-Y

NCS: 2005-R80B

Black

Brown

Granite

Dove

Snowdrift

LRV: 4.56

LRV: 6.05

LRV: 12.77

LRV: 26.99

LRV: 83.77

NCS: 8502-B

NCS: 8010-Y50R

NCS: 7005-R50B

NCS: 4500-N

NCS: 0500-N

Flexible Pvc


www.dionepro.fi

PROFILES FOR PUBLIC PREMISES 31

Insert

Colour chart - insert colours

Xtra-grip™

Xtra-grip Plus™

Carbon

Deepsea

Truffle

Rock

LRV: 5.01

LRV: 5.94

LRV: 7.85

LRV: 10.91

NCS: 8502-B

NCS: 8010-R70B

NCS: 8010-Y50R

NCS: 7005-R50B

Pebble

Pampas

Breeze

Vapour

LRV: 27.61

LRV: 53.04

LRV: 51.13

LRV: 39.74

Ink

Burgundy

Midnight NCS: 4500-N

NCS: S2005-G

Zest

Iceberg

LRV: 50.66

LRV: 51.11

LRV: 81.58

Ocean

Coffee

Conker

LRV: 5.94

LRV: 7.85

NCS: 8502-B

NCS: 8010-R70B

NCS: 8010-Y50R

Bone

Sulphur

Diamond

Meltwater

LRV: 51.11

LRV: 81.58

LRV: 51.13

Buttercup

Snowdrift NCS: 2502-B

Lead Oat

Navy

LRV: 5.01

LRV: 50.66

Linen Canvas

NCS: S1515-R90B

Raven

Cloud

NCS: 2005-Y30R

NCS: 1070-Y

NCS: 0500-N

NCS: S1515-R90B

Marl

Cliff

Vine

Lunar

LRV: 10.91

LRV: 27.61

LRV: 53.04

LRV: 39.74

NCS: S2005-G

NCS: 2502-B

Nutmeg

Glacier

Steel

minescent NCS: 2005-Y30R

NCS: 1070-Y

NCS: 7005-R50B

NCS: 0500-N

NCS: 4500-N

Interior, Standard Finish Jet

Ink

Midnight

Burgundy

Canvas

Linen

Buttercup

Snowdrift

LRV: 4.56

LRV: 4.96

LRV: 6.56

LRV: 5.70

LRV: 53.27

LRV: 38.59

LRV: 55.54

LRV: 83.77

NCS: 8502-B

NCS: 8010-R70B

NCS: 6030-R80B

NCS: 6030-R10B

NCS: 2005-Y30R

NCS: 3010-Y30R

NCS: 1070-Y

NCS: 0500-N

Evergreen

Coffee

Ocean

Lead

LRV: 6.69

LRV: 6.05

LRV: 8.00

LRV: 12.77

Cloud

Nutmeg

Steel

Glacier

LRV: 28.57

LRV: 8.15

LRV: 26.99

LRV: 42.09

NCS: 7020-B70G

NCS: 8010-Y50R

NCS: 4500-N

Poppy

Photoluminescent

LRV: 10.39

LRV: 57.59 - lit conditions

NCS: 2070-R

NCS: 7005-R50B

NCS: 4010-R70B

NCS: 6020-Y80R

Clay

Sky

Jade

Duckegg

LRV: 47.97

LRV: 52.63

LRV: 53.98

LRV: 47.72

NCS: S2502-Y

NCS: S1515-R90B

NCS: S2005-G

NCS: S2010-B10G

NCS: 6020-R90B

Interior Grained Finish

Standard Exterior

Black

Brown

Granite

Dove

LRV: 6.47

LRV: 12.13

LRV: 13.44

LRV: 23.40

NCS: 7502-B

NCS: 6010-Y70R

NCS: 6502-R

NCS: 5000-N

Heavy Duty Exterior Black

Yellow

White

Charcoal

LRV: 3.70

LRV: 44.92

LRV: 58.38

LRV: 4.07

Corn

Ash

Avalanche

LRV: 31.28

LRV: 24.77

LRV: 73.00

Nightsky

Sunrise

Nebula

LRV: 4.55

LRV: 46.38

LRV: 65.71

NCS: 2502-B


32 PROFILES FOR PUBLIC PREMISES

www.dionepro.fi


www.dionepro.fi

PROFILES FOR PUBLIC PREMISES 33

XT™ RANGE - ALUMINIUM The XT aluminium stair edging range of profiles has been designed to improve the safety on stairs when used in conjunction with a wide range of floorcoverings making them an ideal solution for many commercial environments such as offices, schools and hospitals.

XT RANGE, aluminium

INSERT OPTIONS

Material

Length

Product code

S/O

Aluminium

244 cm 275 cm 320 cm

ASXT20

O

Profile 65

Xtra-grip: Xtra-grip Plus: Carbon 36

40

65

Aluminium

244 cm 275 cm 320 cm

AKXT50A

O 40

36

Raven

Deepsea

Navy

Truffle

Conker

Rock

Marl

Pebble

Cliff

Pampas

Vine

Breeze

Meltwater

Vapour

Lunar

Oat

Bone

Zest

Sulphur

Iceberg

Diamond

244 cm 275 cm 320 cm

ASXT11

O

2

40

55

244 cm 275 cm 320 cm

AKXT5A

O

2

36

40

65

Aluminium

Aluminium

244 cm 275 cm 320 cm

AKXT50A

244 cm 275 cm 320 cm

ARXT81

O 36

O

O= ORDER PRODUCT

40

56 2

36

*S = IN STOCK

Burgundy Coffee Lead Steel Glacier Canvas Clay Sky Duckegg Jade Snowdrift

36

Aluminium

Jet Ink

Buttercup

55

Aluminium

Interior:

40

Profile

Aluminium Mill finish


34 PROFILES FOR PUBLIC PREMISES

www.dionepro.fi


www.dionepro.fi

PROFILES FOR PUBLIC PREMISES 35

TRADITIONAL ALUMINIUM An extensive range of attractive and hardwearing stair edgings comprising aluminium channels with a choice of slip-resistant inserts. Used in conjunction with floorcoverings from most major manufacturers, the traditional aluminium stair edging range is suitable for a wide range of commercial installations. TRADITIONAL, aluminium Material

Length

Product code

S/O

Aluminium

244 cm 275 cm 320 cm

AS 10

O

Aluminium

Aluminium

244 cm 275 cm 320 cm

244 cm 275 cm 320 cm

COLOURS AVAILABILITY: Insert options:

Profile

Xtra-grip: Xtra-grip Plus: 65

Carbon 23

AS 11

25

56

O

2

32

29

AS 12

O

Jet

Raven

Deepsea

Navy

Truffle

Conker

Rock

Marl

Pebble

Cliff

Pampas

Vine

Breeze

Meltwater

Vapour

Lunar

Oat

Bone

Zest

Sulphur

Iceberg

Diamond

Interior Ink Midnight Burgundy Evergreen Coffee Nutmeg Ocean Lead Cloud Steel Linen Glacier

84

Canvas

2

Buttercup 29

32

Poppy Photoluminescent Snowdrift

57

Aluminium

Aluminium

Aluminium

244 cm 275 cm 320 cm

AK 5 A

2

O

Interior, grained

244 cm 275 cm 320 cm

AS 1

244 cm 275 cm 320 cm

AR 3

O

2.5

*S = IN STOCK

AR 32

25

52

O

O= ORDER PRODUCT

O

Lignite

Granite

Sunrise

Dove

Nebula

Profile: 22

2

30

82

244 cm 275 cm 320 cm

Brown

55

27

Aluminium

Nightsky

32

29

Exterior

Black

2.5

27

30

Aluminium Mill finish


36 PROFILES FOR PUBLIC PREMISES

www.dionepro.fi

TRADITIONAL, aluminium Material

Length

Product code

S/O

Aluminium

244 cm 275 cm 320 cm

SE 1

O

COLOUR AVAILABILITY Insert options:

Profiles

Xtra-grip:

48 3

34

Aluminium

244 cm 275 cm 320 cm

SD 1

37

48

O

3

36

33

Xtra-grip Plus:

Carbon

Raven

Deepsea

Navy

Truffle

Conker

Rock

Marl

Pebble

Cliff

Pampas

Vine

Breeze

Meltwater

Vapour

Lunar

Oat

Bone

Zest

Sulphur

Iceberg

Diamond

Jet Ink Midnight Burgundy Evergreen Coffee Nutmeg Ocean Lead Cloud Steel Linen Glacier

48

Aluminium

244 cm 275 cm 320 cm

HE 1

O

Interior

4.5

Canvas 33.5

Buttercup

38

Poppy Photoluminescent Snowdrift

48

Aluminium

244 cm 275 cm 320 cm

HD 1

O

4.5

Interior, grained Black

37.5

33

Brown

Lignite

Granite

Sunrise

Dove

Nebula

60

Aluminium

Aluminium

*S = IN STOCK

244 cm 275 cm 320 cm

G 11

244 cm 275 cm 320 cm

G 51

O

5

Profile: 27

O= ORDER PRODUCT

O

32

62 5

27

32

Exterior Nightsky

Aluminium Mill finish


www.dionepro.fi

PROFILES FOR PUBLIC PREMISES 37


38 PROFILES FOR PUBLIC PREMISES

www.dionepro.fi

TRANS-EDGE™ - HEAVY-DUTY STAIR EDGINGS Gradus Trans-Edge is a range of heavy-duty aluminium stair edgings incorporating Stairtile and exterior grade slip-resistant insert material suitable for interior or exterior use. Trans-Edge is the ideal choice for use in railway stations, car parks, airports and petrochemical environments.


www.dionepro.fi

PROFILES FOR PUBLIC PREMISES 39

TRANS-EDGE Material Aluminium

Length 275 cm

Product code

S/O

TEXN11

O

Profile 75

49

55

Channel: 75

Aluminium

275 cm

TEX11 R

Aluminium Mill finish

Insert options:

O

Exterior: 49

55

Avalanche Ash Charcoal Corn

62

Aluminium

275 cm

TEX 11

6

O

55

49

75

Aluminium

275 cm

TEXN51

O 55

49

75

Aluminium

275 cm

TEX51 R

O 55

49

62

Aluminium

275 cm

TEX51

6

O

55

49

Aluminium

275 cm

TEX3 R

181

O

34

128

Aluminium

275 cm

TEX2 R

O 34

Aluminium

275 cm

TEXR 1

O

Aluminium

275 cm

TEXE 1

O

25

68

*S = IN STOCK

O= ORDER PRODUCT

6

40

40


40 PROFILES FOR PUBLIC PREMISES

www.dionepro.fi


www.dionepro.fi

PROFILES FOR PUBLIC PREMISES 41

TRADITIONAL PVC-U HARDNOSE速 Gradus PVC-u Metallic Hardnose速 is a range of attractive and hardwearing stair edgings comprising metallic PVC-u channels and slip-resistant bonded inserts. Selecting a metallic coloured channel provides an alternative to anodised metal stair edgings and creates an attractive design feature. COLOUR AVAILABILITY

PVC-U HARDNOSE, TRADITIONAL Material

Length Product code

S/O Profile

PVC-u

244 cm 275 cm 320 cm

O

RNRC511

Profile

71

RNRC & DDA 29

Black

34

Granite

55

PVC-u

244 cm 275 cm 320 cm

DDA3

6

O

Navy Conker

Brown Dove Evergreen Canvas Snowdrift

244 cm 275 cm 320 cm

RN351

3

31

Interior Grained:

35

Brown Granite 94

244 cm 275 cm 320 cm

RN527

O

Dove

5

Xtra-grip: 43

48

O= ORDER PRODUCT

Lunar Bone Sulphur Diamond

Ink Midnight Burgundy Evergreen Coffee Nutmeg Ocean Lead

Deepsea

Cloud

Truffle

Steel

Rock

Linen

Pampas Breeze Vapour Oat Zest Iceberg

Factory bonded inserts supplied with capping plugs to conceal screw heads after fixing

Meltwater

Carbon

Pebble

*S = IN STOCK

Cliff Vine

Jet Black

PVC-u

Marl

Interior:

60

O

Raven

Glacier Buttercup Bluebell 55

Xtra-grip Plus:

Ink

DDA Only

48.5

PVC-u

Insert options

Glacier Canvas Buttercup Poppy Photoluminescent

Snowdrift


42 PROFILES FOR PUBLIC PREMISES

www.dionepro.fi


www.dionepro.fi

PROFILES FOR PUBLIC PREMISES 43

EXPANSION JOINT PROFILES FOR FLOORING MATERIALS The expansion joint profile covers the expansion joint between two floorings. EXPANSION JOINT PROFILES Width/type

Length Product code

S/O

Flooring expansion joint, L model H=3 mm

250 cm

E 30

S

Flooring expansion joint, L model H=4.5 mm

250 cm

E 45

S

Flooring expansion joint, L model H=6 mm

250 cm

E 60

S

Flooring expansion joint, L model H=8 mm

250 cm

E 80

S

Flooring expansion joint, L model H=10 mm

250 cm

E 100

S

Flooring expansion joint, L model H=12.5 mm

250 cm

E 125

S

Flooring expansion joint, L model H=15 mm

250 cm

E 150

S

Pintamateriaalien liikuntasaumalista, L-malli H=20 mm

200 cm

E 200

O

Pintamateriaalien liikuntasaumalista, L-malli H=25 mm

250 cm

E 250

O

Pintamateriaalien liikuntasaumalista, L-malli H=30 mm

300 cm

E 300

O

Ready-made expansion joint profile with a rubber, H=10 mm, aluminium

250 cm

LS 100 AL GREY

S

Ready-made expansion joint profile with a rubber, H=8 mm, stainless steel

250 cm

LS 80 RST GREY

O

Ready-made expansion joint profile with a rubber, H=10 mm, stainless steel

250 cm

LS 100 RST GREY

O

Ready-made expansion joint profile with a rubber, H=12.5 mm, stainless steel

250 cm

LS 125 RST GREY

O

*S = IN STOCK

Expansion joint profile, L-model

Expansion joint profile, aluminium

Expansion joint profile, stainless steel

O= ORDER PRODUCT

EXPANSION JOINT PROFILES Width/type

Length

Product code

S/O

LL1 Grey

300 cm

0393023

O

LL1 Black

300 cm

0393009

O

LL2 Grey

300 cm

0346029

O

LL2 Black

300 cm

0346005

O

LL3 Grey

300 cm

0393320

O

LL4 Grey

300 cm

0342427

O

LL5 Grey

300 cm

0315025

O

LL6 Grey

300 cm

0316022

O

*S = IN STOCK

O= ORDER PRODUCT

Expansion joint profile LL1

Expansion joint profile LL2

Expansion joint profile LL3

Expansion joint profile LL5

Expansion joint profile LL4

Expansion joint profile LL6


44 PROFILES FOR PUBLIC PREMISES

www.dionepro.fi

STRUCTURAL EXPANSION JOINT PROFILES Providing the expansion joint between surface casting and flooring with one profile only saves time and costs. The use of expansion joint profiles makes it possible to avoid expensive expansion joint repairs under warranty and provide the flooring with an impressive looking expansion joint. STRUCTURAL EXPANSION JOINT PROFILES Model

Clearance

Cover width

Structural width

Total height

Structural expansion joint width, max

S/O

BS 2 5000 1

14 mm (-7 mm, +7 mm)

55 mm

40 mm

190 mm

55 mm

O

GTA-N 2 1022 1

10mm (-5 mm, +5 mm)

75 mm

22 mm

200 mm

50 mm

O

GTA-N 2 1040 1

10 mm (-5 mm, +5 mm)

n. 75 mm

40 mm

200 mm

50 mm

O

EX

10 mm (-5 mm, +5 mm)

30 mm

84 mm

acc.to need*

50 mm

O

*to be specified within 30-100 mm

EX

Load endurance: light lorries with a maximum total weight of 3 tons. Unsuitable for premises where hard-wheeled pallet jacks are used. Material: ground stainless steel (S= 1.0 mm). The seal is made of flexible and durable plastic. Seal colours:grey and black. Also available with an oil-proof nitrite rubber. Length 3 m. Installation: a bed of mortar is spread on both sides under the expansion joint profile to make it possible to adjust the final height of the profile’s upper edge. The profile is pressed on the mortar bed. After the mortar bed has hardened, the profile is mounted on the floor with bolts at intervals of 40 cm. The surface mortar’s upper edge is left as much below the profile’s top edge as the surface material requires so that the final surface material is flush with the profile’s edge. Applications: expansion joints of floor structures in points that require an impressive looking expansion joint profile placed at exactly the correct height.

GTA -N

Material and load endurance: frame is totally made of extruded aluminium. Withstands the load generated by light vans with a total weight of 1.5 tons. In addition, it withstands the load generated by shopping trolleys (the maximum weight of trolleys with plastic wheels is 500 kg). Not recommended for points where pallet jacks are used. Installation: a bed of mortar is spread on both sides under the expansion joint profile to make it possible to adjust the final height of the profile’s upper edge. The profile is pressed on the mortar bed. After the mortar bed has hardened, the profile is mounted on the floor with bolts at intervals of 40 cm. The surface mortar’s upper edge is left as much below the profile’s top edge as the surface material requires so that the final surface material is flush with the profile’s edge. Applications: expansion joints of floor structures in shopping centres and other objects subject to hard wear and tear.

BS

Material and load endurance: frame is made of extruded aluminium. The seal is made of flexible and durable plastic. Seal colours: light grey, black and brown. Length 5 m. Withstands the load generated by light lorries with a maximum total weight of 3 tons. Unsuitable for premises where hard-wheeled pallet jacks are used. Installation: a bed of mortar is spread on both sides under the expansion joint profile to make it possible to adjust the final height of the profile’s upper edge. The profile is pressed on the mortar bed. After the mortar bed has hardened, the profile is mounted on the floor with bolts at intervals of 40 cm. The surface mortar’s upper edge is left as much below the profile’s upper edge as the surface material requires so that the final surface material is flush with the profile’s edge. Applications: expansion joints


www.dionepro.fi

PROFILES FOR PUBLIC PREMISES 45

STRUCTURAL EXPANSION JOINT PROFILES Model

Clearance

Cover width

Structural Total width height

Structural expansion joint width, max.

RO 2 0500 2

6 mm (-3 mm, +3 mm)

65 mm

155 mm

50 mm

40 tai 50 mm

O

RO 2 0800 2

10 mm (-5 mm, +5 mm)

85 mm

175 mm

40 tai 50 mm

80 mm

O

RO 2 1000 2

15 mm (-7,5 mm, +7,5 mm)

105 mm

195 mm

40 tai 50 mm

100 mm

O

TBG 2 5030 4

8 mm (-4 mm, +4 mm)

42 mm

110 mm

20 mm

30 mm

O

TBG 2 5035 4

8 mm (-4 mm, +4 mm)

42 mm

110 mm

35 mm

30 mm

O

BL 2 2900 1

10 mm (-5 mm, +5 mm)

28 mm

125 mm

40 mm

30 mm

O

*S = IN STOCK

O= ORDER PRODUCT

RO

Material and load endurance: thick aluminium profile, withstands the load generated by lorries, industrial trucks and pallet jacks. Installation: both profile edges must be mounted on the floor with epoxide resin across the width of 100 mm to allow the profile to remain in place in hard use. The profile is efficiently pressed onto epoxide resin and the substance is allowed to harden entirely. The height of the flooring and the casting must be taken into account at the installation stage to enable the profile surface to be mounted flush with the flooring. Then the profile is fastened in place with at least 10 mm stress-resistant bolts at intervals of 300 mm. Applications: expansion joints of the floors in shops, fair centres, warehouses and airports. Withstands heavy use and suitable for challenging objects in public premises.

TBG

Material and load endurance: aluminium profile, withstands the load generated by passenger cars, industrial trucks and light lorries with a maximum total weight of 3 tons and the wheel diameter of 300 mm. Installation: a mortar bed with a width of about 10 cm is spread on both sides of the expansion joints. The thickness of the mortar bed determines the final height of the profile. The profile is pressed on the mortar. After the mortar has hardened, horizontal profile sections are mounted in place with bolts at intervals of about 30 cm. Applications: Industrial premises and parking halls.

BL

S/O

Material and load endurance: the aluminium profile withstands the load generated by passenger cars and light lorries with a maximum total weight of 3 tons. Unsuitable flooring material for objects where industrial trucks or pallet jacks are used. Installation: a mortar bed with a width of about 10 cm is spread on both sides of the expansion joints. The thickness of the mortar bed determines the final height of the profile. The profile is pressed on the mortar. After the mortar has hardened, horizontal sections of the profile are mounted in place with bolts at intervals of about 40 cm. Applications: offices and public buildings.


46 PROFILES FOR PUBLIC PREMISES

www.dionepro.fi


www.dionepro.fi

PROFILES FOR PUBLIC PREMISES 47

TILING PROFILES Tiling profiles protect outer tiling corners, keep them cleaner and cover tiling edges. The tiling profiles save time and make tiling work easier. Material: made of stainless steel suitable for public premises. Installation: the profile is pressed on the mounting mortar when outer corner tiles are installed. Cutting: profiles are shortened with a wheel fit for cutting stainless steel. The wheel is attached to an angle grinder. A small number of profiles can be shortened with a hacksaw. Applications: offices, hotels, schools, shopping centres and outer tiling corners in other public premises. TILING PROFILES Width/type

Length

Product code

S/O

ROUND MODEL Stainless steel H=6mm

250 cm (300 cm)

6530-RST (58100)

S/O

Stainless steel H=6mm, ground

250 cm (300 cm)

54116 (58100)

O

Stainless steel H=6mm, glossy

250 cm (300 cm)

54130 (58130)

O

Stainless steel H=8 mm

250 cm (300 cm)

6534-RST (58200)

S/O

Stainless steel H=8 mm, ground

250 cm (300 cm)

54216 (58216)

O

Stainless steel H=8 mm, glossy

250 cm (300 cm)

54230 (58230)

O

Stainless steel H=10 mm

250 cm (300 cm)

6535-RST (58300)

S

Stainless steel H=10 mm, ground

250 cm (300 cm)

6535-RST HI (58316)

S/O

Stainless steelH=10 mm, glossy

250 cm (300 cm)

54330 (58330)

O

Stainless steel H =11 mm

250 cm (300 cm)

54350 (58350)

O

Stainless steel H=11 mm, ground

250 cm (300 cm)

54516 (58516)

O

Stainless steel H=11 mm, glossy

250 cm (300 cm)

54360 (58360)

O

Stainless steel H=12,5 mm

250 cm (300 cm)

6570-RST (58400)

S/O

Stainless steel H=12,5 mm, ground

250 cm (300 cm)

54416 (58416)

O

Stainless steel H=12,5 mm, glossy

250 cm (300 cm)

54430 (58430)

O

Stainless steel H=15 mm

250 cm (300 cm)

54500 (58500)

O

Inner corner for 6535 profile, type 6535-IC

6535-IC

S

Outer corner for 6535 profile, type 6535-OC

6535-OC

S

Round model

COLOURED ALUMINIUM, round model White H= 6 mm

250 cm (300 cm)

53110 (57110)

O

White H= 8 mm

250 cm (300 cm)

53210 (57210)

O

White H=10 mm

250 cm (300 cm)

53310 (57310)

O

White H= 12,5 mm

250 cm (300 cm)

53415 (57410)

O

White H=15 mm

250 cm (300 cm)

53510 (57510)

O

Light grey H=6 mm

250 cm (300 cm)

53140 (57140)

O

Light grey H=8 mm

250 cm (300 cm)

53240 (57240)

O

Light grey H=10 mm

250 cm (300 cm)

53340 (57340)

O

*S = IN STOCK

Coloured model

O= ORDER PRODUCT

Outer and inner corner pieces are avalable on order to nearly all models! Round tiling profiles com in lengths of 250 and 300 cm. (The code in brackets is for the length of 300 cm).


48 PROFILES FOR PUBLIC PREMISES

www.dionepro.fi


www.dionepro.fi

PROFILES FOR PUBLIC PREMISES 49

TILING PROFILES SQUARE MODEL Stainless steel H=8 mm, glossy

250 cm

6550

S

Stainless steel H=8 mm, ground

250 cm

14245

O

Stainless steel H=10 mm, glossy

250 cm

6555

S

Stainless steel H=10 mm, ground

250 cm

14365

O

Stainless steel H=12.5 mm, glossy

250 cm

6560

A

Stainless steel H=12.5 mm, ground

250 cm

14465

O

Stainless steel H=15 mm, glossy

250 cm

6565

A

Stainless steel H=22 mm, glossy

250 cm

526808

O

250 cm

E 20-10

S

Square model for hard use RST H=10 mm

*S = IN STOCK

Square model

O= ORDER PRODUCT


50 PROFILES FOR PUBLIC PREMISES

www.dionepro.fi


www.dionepro.fi

TILING STAIR EDGE PROFILES Rubber-rimmed stair edge profiles prevent people from slipping in the stairways.

TILING STAIR EDGE PROFILES Width/type

Length

Product code

S/O

Beige, H=9 mm

250 cm (300 cm)

80220 (89220)

O

Beige, H=11 mm

250 cm (300 cm)

80420 (89420)

O

Beige, H=13,5 mm

250 cm (300 cm)

80620 (89620)

O

Ruskea, H=9 mm

250 cm (300 cm)

80250 (89250)

O

Ruskea, H=11 mm

250 cm (300 cm)

80450 (89450)

O

Ruskea, H=13,5 mm

250 cm (300 cm)

80650 (89650)

O

Harmaa, H=9 mm

250 cm (300 cm)

80240 (89240)

O

Harmaa, H=11 mm

250 cm (300 cm)

6590-harmaa (89440)

S/O

Harmaa, H=13,5 mm

250 cm (300 cm)

80640 (89640)

O

Musta, H=9 mm

250 cm (300 cm)

80230 (89230)

O

Musta, H=11 mm

250 cm (300 cm)

6590-black (89440)

S/O

Musta, H=13,5 mm

250 cm (300 cm)

80630 (89630)

O

*S = IN STOCK

O= ORDER PRODUCT

Order products (O) are sold in full consignments of 10 pcs. The code in brackets is for the length of 300 cm.

TILING EDGE TRIMS TILING EDGE TRIMS Width/type

Length

Product code

S/O

Stainless steel, bright, H=8 mm

250 cm (300 cm)

54600 (58600)

O

Stainless steel, brushed, H=8 mm

250 cm (300 cm)

54615 (58615)

O

Stainless steel, bright, H=10 mm

250 cm (300 cm)

54700 (58700)

O

Stainless steel, brushed, H=10 mm

250 cm (300 cm)

54715 (58715)

O

Stainless steel, bright, H=12 mm

250 cm (300 cm)

54800 (58800)

O

Stainless steel, brushed, H=12 mm

250 cm (300 cm)

54815 (58815)

O

*S = IN STOCK

O= ORDER PRODUCT

PROFILES FOR PUBLIC PREMISES 51


52 PROFILES FOR PUBLIC PREMISES

www.dionepro.fi


www.dionepro.fi

PROFILES FOR PUBLIC PREMISES 53

RAMPS WITH LEVEL DIFFERENCE Wide ramps even out the level difference of different materials in renovation objects in particular, and save renovation time and costs. The ramps are designed to make the traffic easier in public premises and facilities. Length 270 mm. RAMPS WITH LEVEL DIFFERENCE Type

Colour

Lenght

Product code

S/O

Ramp 1

Aluminium

270 cm

2062309

S

Ramp 2

Aluminium

270 cm

2062101

S

Ramp 3

Silver-anodised aluminium

270 cm

5502260

O

Ramp 4

Silver-anodised aluminium

270 cm

5502277

O

Ramp 5

Silver-anodised aluminium

270 cm

5502284

O

Ramp 6

Silver-anodised aluminium

270 cm

5502291

S

*S = IN STOCK

O= ORDER PRODUCT

Ramp 1 2062309 Aluminium

Ramp 4 5502277 Silver-anodised aluminium

Ramp 2 2062101 Aluminium

Ramp 5 5502284 Silver-anodised aluminium

Ramp 3 5502290 Hopea-anodisoitua alumiinia

Ramp 6 5502291 Silver-anodised aluminium


54 PROFILES FOR PUBLIC PREMISES

www.dionepro.fi


www.dionepro.fi

PROFILES FOR PUBLIC PREMISES 55

COLUMN COLLARS Material: made of stainless steel or brass suitable for public premises. Always manufactured on order in accordance with the reported diameter. Material thickness 0.8 mm or 1.5 mm. Cutting: the assembly margin of the other half is shortened to size accurately by using a hacksaw, or a wheel fit for cutting stainless steel. The wheel is attached to an angle grinder. Installation: profiles are fastened with glue using a tightening line. Applications: offices, hotels, schools, shopping centres and objects in other public premises.

2-part column collars  >200 mm korkeus 40-150 mm

COLUMN COLLARS Width/type

Product code

S/O

more than  200 mm, height 40-150 mm, ground stainless steel, 2-part

JLRST 300 *

O

more than 200 mm, height 40-150 mm, ground brass, 2-part

JLMS 300 *

O

less than  200 mm, heightt 40-150 mm, ground stainless steel, 4-part

JLRST 200 *

O

less than  200 mm, height 40-150 mm, ground brass,, 4-part

JLMS 200 *

O

*Accurate height and diameter dimensions must be notified when ordering the products. The width of the bottom flange in the two-part collar is always 10 mm but 15–40 mm in the 4-part collar at the customer’s option.

*S = IN STOCK

4-part column collars  <200 mm korkeus 40-150 mm

O= ORDER PRODUCT

ANTI-SLIP ADHESIVE TAPES ANTI-SLIP ADHESIVE TAPES FOR PUBLIC PREMISES Width/type

Length

Product code

S/O

25 mm, black/yellow

18,3 m

77000

O

50 mm, black/yellow

18,3 m

77001

O

25 mm, black

18,3 m

77025

S

50 mm, black

18,3 m

77050

S

25 mm, colorless

18,3 m

77030

S

50 mm, colorless

18,3 m

77060

S

25 mm, grey

18,3 m

77030

S

50 mm, grey

18,3 m

77057

S

*S = IN STOCK

O= ORDER PRODUCT


56 PROFILES FOR PUBLIC PREMISES

www.dionepro.fi


www.dionepro.fi

PROFILES FOR PUBLIC PREMISES 57

Inspection and access hatches The DionePro access covers on the floor offer a number of significant benefits. The product set durability is ensured with load endurance certification and quality control. Water and gas-proof hatches are safe and enable their installation in challenging applications as well. The fire protection system of DionePro hatches ensures a 90-minute fire endurance time, for instance, for the BV-F90 hatch in accordance with the official IBS fire-endurance test. Durable and high-quality opening handles, locking mechanisms, spring systems and corner shapes emphasise the user-friendliness and strong quality of our inspection and access hatches.


58 INSPECTION AND ACCESS HATCHES

www.dionepro.fi

WALL AND CEILING COVER PLATES DionePro cover plates can be mounted on the walls or ceilings. Steel covers are white-painted and glossy. Cover plates are protected against scratching with a transparent protective film. The film is easy to detach at the installation stage. WALL AND CEILING COVER PLATES Model

Size (mm)

PL 140

200 x 200 x 0,8 mm

PL 200

260 x 260 x 0,8 mm

PL 300 PL 400

Colour

Weight (kg)

0,8 mm

White

0,26 kg

10

S

0,8 mm

White

0,45 kg

10

S

360 x 360 x 0,8 mm

0,8 mm

White

0,88 kg

5

S

460 x 460 x 0,8 mm

0,8 mm

White

1,40 kg

5

S

PL 500

560 x 560 x 0,8 mm

0,8 mm

White

2,00 kg

5

S

*S = IN STOCK

Thickness (mm)

O= ORDER PRODUCT

• Rounded and trimmed edges • Mounting holes in corners, diameter 4 mm • Colour: matt white

Package size

S/O


www.dionepro.fi

INSPECTION AND ACCESS HATCHES

NEW INSPECTION DOOR SET DESIGNED FOR WALLS AND CEILINGS Our DionePro hatch selection includes new inspection door options designed for walls and ceilings. Fourmodels with different properties are available and come in several sizes. Basic steel-made wall-mounted inspection doors with white surface painting differ from the options on the market due to their new round edge design. They are best suited to conspicuous locations in which the highest possible requirements are set for the hatch appearance and finish. The selection includes impressive, thermally insulated inspection doors made of ground aluminium as well. Other models include inspection doors that are made of steel, primed white and fire-proof, or inspection doors that are fire-proof and thermally insulated.

Illustrations: 1. Steel inspection door with round edges (left top edge), 2. Thermally insulated aluminium inspection door (right top edge) 3. Fire-proof steel inspection door (left bottom edge) 4. Fire-proof thermally insulated inspection door (right bottom edge).

59


60 INSPECTION AND ACCESS HATCHES

www.dionepro.fi

THERMALLY INSULATED INSPECTION DOOR LT-314, LT-467 Applications • Suitable for all wall surfaces in indoor and outdoor use. Properties: • The cover is provided with a thermally insulated plate. • Concealed hinge Material: • Light-structured, untreated aluminium with brushed surface. • The frame is equipped with a seal. • The lock can be opened with a screwdriver.

THERMALLY INSULATED INSPECTION DOORS Model Type Hatch size

Installation opening size

Weight

S/O

LT-314

Thermally insulated inspection door

305 x 305 mm

314 x314 mm

1,8 kg

S

LT-467

Thermally insulated inspection door

457 x 457 mm

467 x 467 mm

2,7 kg

S

S = IN STOCK

O= ORDER PRODUCT

INSPECTION DOOR Applications • Suitable for all wall and ceiling surfaces. Properties: • The seamless frame with round corners is made of one part only. • Concealed hinge Material • Galvanised steel with white surface painting. • The lock can be opened with a screwdriver. iNSPECTION DOORS Model

Hatch size

Installation opening size

Weight

UF-158

152 x 152 mm

157 x 157 mm

0,68 kg

S

UF-208

203 x 203 mm

208 x 208 mm

0,91 kg

S

UF-310

305 x 305 mm

310 x 310 mm

1,14 kg

S

UF-386

381 x 381 mm

386 x 386 mm

2,50 kg

S

UF-462

457 x 457 mm

462 x 462 mm

3,41 kg

S

UF-615

610 x 610 mm

615 x 615 mm

5,45 kg

S

S = IN STOCK

O= ORDER PRODUCT

S/O


www.dionepro.fi

61

INSPECTION AND ACCESS HATCHES

FIRE-PROOF WALL HATCH FB-30890, FB-46090 Applications • Suitable for all wall surfaces in indoor and outdoor use. • Fire-proof on wall surfaces (90 min). Properties: • Cover provided with a 2.5 cm fire insulation. • Concealed hinge • Self-closing and locking (equipped with a spring). Material: • White, primed steel • Lockable with a key and openable with a separate fixed opening knob attached to the hatch. • Locking is openable also from inside. FIRE-PROOF WALL HATCH Model

Type

Hatch size

Installation opening size

Weight

Fire endurance

FB-30890

Fire-insulated wall-mounted inspection door

305 x 305 mm

308 x 308 mm

3,8 kg

90 min

S

FB-46090

Fire-insulated wall-mounted inspection door

457 x 457 mm

460 x 460 mm

6,5 kg

90 min

S

S = IN STOCK

S/O

O= ORDER PRODUCT

FIRE-PROOF WALL-MOUNTED INSPECTION DOOR WITH THERMAL INSULATION FW-30890, FW-46090 Applications • Suitable for all wall and ceiling surfaces. • Fire-proof on wall surfaces (90 min), fire-retardant on ceiling surfaces. Properties: • Cover provided with a 5 cm fire-proof thermal insulation. • Concealed hinge • Self-closing and locking (equipped with a spring). Material: • White, primed steel • Lockable with a key or openable with a separate fixed opening knob attached to the hatch. • Locking is openable also from inside.

FIRE HATCHES Model

Type

Hatch size

Installation opening size

Weight

Fire endurance

FW-30890

Fire-proof inspection door with thermal insulation

305 x 305 mm

308 x 308 mm

4,8 kg

90 min

V

FW-46090

Fire-proof inspection door with thermal insulation

457 x 457 mm

460 x 460 mm

9,1 kg

90 min

V

S = IN STOCK

O= ORDER PRODUCT

S/O


62 INSPECTION AND ACCESS HATCHES

www.dionepro.fi

INSPECTION DOORS FOR WALLS AND CEILINGS UNCLASSIFIED INSPECTION DOORS FOR WALLS AND CEILINGS Hatch size

Installation opening size

Product code

S/O

23,5 x 23,5 cm

20 x 20 cm

ACH-200

S

33,5 x 23,5 cm

30 x 30 cm

ACH-300

S

43,5 x 43,5 cm

40 x 40 cm

ACH-400

S

53,5 x 53,5 cm

50 x 50 cm

ACH-500

S

63,5 x 63,5 cm

60 x 60 cm

ACH-600

S

S=IN STOCK O=ORDER PRODUCT

If you need hatches with properties different from our standard models, contact our sales team for more information.


www.dionepro.fi

INSPECTION AND ACCESS HATCHES

FIRE-PROOF INSPECTION DOORS FOR WALLS AND CEILINGS EI 30 FIRE CLASS INSPECTION DOORS FOR WALLS AND CEILINGS Hatch size

Installation opening size

Product code

S/O

23,5 x 23,5 cm

20 x 20 cm

FR30-200

O

33,5 x 33,5 cm

30 x 30 cm

FR30-300

O

43,5 x 43,5 cm

40 x 40 cm

FR30-400

O

53,5 x 53,5 cm

50 x 50 cm

FR30-500

O

63,5 x 63,5 cm

60 x 60 cm

FR30-600

O

S=IN STOCK O=ORDER PRODUCT

EI 60 FIRE CLASS INSPECTION DOORS FOR WALLS AND CEILINGS Hatch size

Installation opening size

Product code

S/O

23,5 x 23,5 cm

20 x 20 cm

FR60-200

O

33,5 x 33,5 cm

30 x 30 cm

FR60-300

O

43,5 x 43,5 cm

40 x 40 cm

FR60-400

O

53,5 x 53,5 cm

50 x 50 cm

FR60-500

O

63,5 x 63,5 cm

60 x 60 cm

FR60-600

O

S=IN STOCK O=ORDER PRODUCT

ACOUSTIC INSPECTION DOORS DESIBEL CLASS (35 db) INSPECTION DOORS FOR WALLS AND CEILINGS Hatch size

Installation opening size

Product code

23,5 x 23,5 cm

20 x 20 cm

ISH-200

S

33,5 x 33,5 cm

30 x 30 cm

ISH-300

S

43,5 x 43,5 cm

40 x 40 cm

ISH-400

S

53,5 x 53,5 cm

50 x 50 cm

ISH-500

O

63,5 x 63,5 cm

60 x 60 cm

ISH-600

O

S=IN STOCK O=ORDER PRODUCT

S/O

63


64 INSPECTION AND ACCESS HATCHES

www.dionepro.fi

ACCESS COVERS DionePro access covers are gas and water-proof, precision-machined and easy to coat. The access covers come in many sizes and shapes. They are made of aluminium, or stainless and galvanised steel. Thanks to their patented opening mechanism, the manholes are easy to open. As DionePro access covers are gas and water-proof, they are best suited to inspection doors for well-ventilated base floors, also in radon areas. The access covers are also available as options lined up in rows and used in cable channels of passages, for example. When cast and coated, basic models withstand the weight of the passenger car. Access covers that withstand the weight generated by heavy vehicles are also available. Stainless steel manholes are suitable for hospitals and food production premises as well. The fire-endurance time of the cast and coated basic models is about 60 min. In addition, challenging objects can be provided with fire hatches with a fire-endurance time of 90 min.

ESCAPE HATCH Pisko emergency exit hatch equipped with telescope ladder is intended to be used as a fire escape from balcony to lower balcony. In emergency the lid of hatch is opened. Sealed launching lever is turned 90 degrees at which point the lower hatch opens. Fire wool that is on the top of the lower hatch is to be pushed down. After this telescope ladder is lifted from its holders and let to descend. Now ladder is ready to be used. Fire class:

Fire class EI 60 requires two 30 mm layers of insulation wool on the lower cover. Fire class EI 120 requires two 50 mm layers of insulation wool on the lower cover.

Technical specifications: Material galvanised steel aluminium upper cover. Coating powder painted 1,900 mm x 450 mm with the ladder opened


www.dionepro.fi

INSPECTION AND ACCESS HATCHES

BALCONY HATCHES Model

Inner measure (mm)

Outer measure (mm)

Weight without ladder (kg)

PL 66

620 x 620 mm

780 x 780 mm

50 kg

The emergency hatch to be mounted on the balcony is provided with a ladder that can be released from inside the hatch or without a ladder.

DUURIPro â&#x20AC;&#x201C; ESCAPE HATCH OPERATING INSTRUCTIONS 1. Open the cover on the balcony. 2. Cut the seal on the red release lever. 3. Turn release lever 90 degrees to open the lower cover. 4. Push the insulation wool down from under the ladder. 5. Check that there is no-one under the ladder. Lift the ladder from its bracket and lower it down. 6. Now you can safely access the balcony below. Note: Unnecessary cutting of the seal and use of the hatch will cause significant costs which the resident is obligated to pay for.

65


66 INSPECTION AND ACCESS HATCHES

www.dionepro.fi

BV STEEL ACCESS COVER GAS AND WATER-PROOF

Load endurance: 125 kN Material: the frame and cover are made of a 2 mm steel profile. The structure is galvanised after welding. Properties: gas and water-proof access cover which is manufactured with accurate dimensions. The conical design and the lift key make it easy to open. Thanks to its small corners and accurately dimensioned edge structure, the manhole is almost inconspicuous in the flooring after its installation. The reinforcement inside the access cover improves structural load endurance. Applications: manholes that must be gas and water-proof in indoor and outdoor use.

Model

Inner measure (cm) CxD

Outer measure (cm) AxB

Weight before filling (kg)

S/O*

BV 33

30 x 30

43,5 x 43,5

10 kg

S

BV 44

40 x 40

53,5 x 53,5

13 kg

S

BV 45

45 x 45

58,5 x 58,5

16 kg

S

BV 55

50 x 50

63,5 x 63,5

17 kg

S

BV 64

60 x 40

73,5 x 53,5

17 kg

O

BV 66

60 x 60

73,5 x 73,5

21 kg

S

BV 635

63,5 x 63,5

77,0 x 77,0

22 kg

O

BV 86

80 x 60

93,5 x 73,5

27 kg

O

BV 88

80 x 80

93,5 x 93,5

31 kg

S

BV 106

100 x 60

113,5 x 73,5

31 kg

S

BV 108

100 x 80

113,5 x 93,5

37 kg

S

BV 110

100 x 100

113,5 x 113,5

42 kg

O

*S = IN STOCK

O= ORDER PRODUCT


www.dionepro.fi

5

6

7

22

75

52

36

30

80

67,5

c x d

67,5

A x B 4

3

2

INSPECTION AND ACCESS HATCHES

1

1. Frame 2. Cover 3. Seal 4. Reinforcement 5. Locking bolt 6. Shield plug 7. Fastening clip

The cross-sectional drawing of the BV access cover

The BV access cover, opened and lifting handles in place.

The BV access cover partly covered with tiles.

The BV access cover mounted on the cafĂŠ floor..

67


68 INSPECTION AND ACCESS HATCHES

www.dionepro.fi

BV SHALLOW STEEL AND BVE SHALLOW STAINLESS STEEL ACCESS COVER GAS AND WATER-PROOF Load endurance: 15 kN (walking-resistant). Material: the frame and cover are made of a 2 mm steel profile. The structure is galvanised after welding. The stainless steel product is made of 2 mm stainless steel (quality 304). The surface is passivated throughout after welding. Properties: The manhole cover is manufactured with accurate dimensions. The coverâ&#x20AC;&#x2122;s total height is only 5 cm. The access cover filled with a thinner surface casting is light to open. The reinforcement inside the manhole improves structural load endurance. Applications: access cover in indoor use.

Model

Inner measure (cm) CxD

Outer measure Weight before (cm) filling (kg) AxB

S/O*

33 x 33

O

GALVENISED STEEL BV-shallow 22

The reinforced bottom side of the shallow

1. Frame 2. Cover 3. Seal 4. Reinforcement 5. Locking bolt 6. Shield plug 7. Fastening clip 8. Reinforced bottom side

20 x 20

BV-shallow 33

30 x 30

43 x 43

8 kg

O

BV-shallow 44

40 x 40

53 x 53

12 kg

O

BV-shallow 55

50 x 50

63 x 63

15 kg

O

BV-shallow 64

60 x 40

73 x 53

15 kg

O

BV-shallow 66

60 x 60

73 x 73

19 kg

O

BV-shallow 86

80 x 60

93 x 73

24 kg

O

BV-shallow 88

80 x 80

93 x 93

28 kg

O

BV-shallow 106

100 x 60

103 x 73

27 kg

O

STAINLESS STEEL BVE-shallow 33

30 x 30

43 x 43

8 kg

O

BVE-shallow 44

40 x 40

53 x 53

12 kg

O

BVE-shallow 55

50 x 50

63 x 63

15 kg

O

BVE-shallow 64

60 x 40

73 x 53

15 kg

O

BVE-shallow 66

60 x 60

73 x 73

19 kg

O

BVE-shallow 86

80 x 60

93 x 73

24 kg

O

BVE-shallow 88

80 x 80

93 x 93

28 kg

O

BVE-shallow 106

100 x 60

103 x 73

27 kg

O

Cover depth: 5 cm, total structural height: 7.5 cm *S = IN STOCK

The cross-sectional drawing of the shallow

5 kg

O= ORDER PRODUCT


www.dionepro.fi

INSPECTION AND ACCESS HATCHES

BV-F90 STEEL ACCESS COVER GAS AND WATER-PROOF FIRE ENDURANCE OF 90 min Load endurance: 125 kN Material: the frame and cover are made of a 2 mm steel profile. The structure is galvanised after welding. The access cover is equipped with a fire-protection plate and a fire-resistant special seal. Properties: the fire-resistant, gas and water-proof access cover is manufactured with accurate dimensions. The conical design and the lift key make it easy to open. Thanks to its small corners and accurately dimensioned edge structure, the access cover is almost inconspicuous in the flooring after its installation. The reinforcement inside the access cover improves structural load endurance. Fire-endurance class: the fire endurance time is 90 min after installation and coating. Suitable for objects with high fire safety requirements. The fire protection properties are verified with an official IBS fire-endurance test. Applications: access cover that must be gas and water-proof and require a high fire-endurance class in indoor and outdoor use.

6

5

2

9

8

4

10

3

7

67,5

cxd

67,5 80

AxB

80

89

22

52

75

1

30

1. Frame 2. Cover 3. Fire-proof seal 4. Reinforcement 5. Locking bolt 6. Shield plug 7. Fastening clip 8. Fire-retardant plate 9. Plate lifting ring 10. Fire-retardant plateâ&#x20AC;&#x2122;s edge profile

The cross-sectional drawing of the fire-retardant access cover.

Model

Inner measure (cm) C x D

Outer measure (cm) A x B

Weight before filling (kg)

S/O*

BV-F90 33

30 x 30

43,5 x 43,5

13 kg

O

BV-F90 45

45 x 45

58,5 x 58,5

21 kg

O

BV-F90 55

50 x 50

63,5 x 63,5

23 kg

O

BV-F90 64

60 x 40

73,5 x 53,5

23 kg

O

BV-F90 66

60 x 60

73,5 x 73,5

30 kg

O

BV-F90 635

63,5 x 63,5

77,0 x 77,0

32 kg

O

BV-F90 86

80 x 60

93,5 x 73,5

38 kg

O

BV-F90 88

80 x 80

93,5 x 93,5

45 kg

O

BV-F90 106

100 x 60

113,5 x 73,5

45 kg

O

BV-F90 108

100 x 80

113,5 x 93,5

54 kg

O

BV-F90 110

100 x 100

113,5 x 113,5

63 kg

O

Cover depth: 6.6 cm, total structural height: 7.6 cm *S = IN STOCK

O= ORDER PRODUCT

69


70 INSPECTION AND ACCESS HATCHES

www.dionepro.fi


www.dionepro.fi

INSPECTION AND ACCESS HATCHES

BV ALUMINIUM ACCESS COVER GAS AND WATER-PROOF

The aluminium BV access cover, partly covered with tiles.

The aluminium BV access cover, opened in a textile carpet covered floor.

Load endurance: 125 kN Material: the frame and cover are made of extruded aluminium, the base is made of aluminium plate. Properties: gas and water-proof access cover which is manufactured with accurate dimensions. Water-proof even under the water pressure of 1000 mm. Thanks to its small corners and accurately dimensioned edge structure, the access cover is almost inconspicuous in the flooring after its installation. Ideal for locations where extremely high requirements are set for the appearance of the access coverâ&#x20AC;&#x2122;s visible edge. The reinforcement in the access cover improves structural load endurance. Applications: gas and water-proof access cover located indoors when high requirements are set for the appearance of the access coverâ&#x20AC;&#x2122;s visible edges or when the floor must be ground afterwards (e.g. parquet floors). Model

Inner measure (cm) C x D

Outer measure (cm) A x B

Weight before filling (kg)

S/O*

BVA 22

20 x 20

32 x 32

3 kg

S

BVA 33

30 x 30

42 x 42

5 kg

S

BVA 44

40 x 40

52 x 52

7 kg

S

BVA 45

45 x 45

57 x 67

8 kg

S

BVA 55

50 x 50

62 x 62

9 kg

S

BVA 64

60 x 40

72 x 52

9 kg

S

BVA 66

60 x 60

72 x 72

10 kg

S

BVA 635

63,5 x 63,5

75,5 x 75,5

11 kg

S

BVA 77

70 x 70

82 x 82

12 kg

S

BVA 86

80 x 60

92 x 72

12 kg

S

BVA 88

80 x 80

92 x 92

15 kg

S

BVA 106

100 x 60

112 x 72

15 kg

S

BVA 108

100 x 80

112 x 92

21 kg

S

BVA 110

100 x 100

112 x 112

23 kg

S

Cover depth: 6.6 cm, total structural height: 7.6 cm *S = IN STOCK 5

8

7

4

3

6

2

9

The cross-sectional drawing of the aluminium BV access cover 1. Frame 2. Cover 3. Seal 4. Reinforcement 5. Locking bolt 6. Shield plug

65,5

76,5

1

O= ORDER PRODUCT

60

cxd AxB

60

7. Base plate 8. Corner welding 9. Frame

71


72 INSPECTION AND ACCESS HATCHES

www.dionepro.fi


www.dionepro.fi

INSPECTION AND ACCESS HATCHES

BVE STAINLESS STEEL ACCESS COVER GAS AND WATER-PROOF Load endurance: 125 kN Material: made of 2 mm stainless steel (quality 304). The surface is passivated throughout after welding. Properties: gas and water-proof access cover which is manufactured with accurate dimensions. The conical design and the lift key make it easy to open. Thanks to its small corners and accurately dimensioned edge structure, the manhole is almost inconspicuous in the flooring after its installation. The reinforcement in the manhole improves structural load endurance. Applications: access cover that must be gas and water-proof, extremely corrosion-resistant or hygienic, such as those in food production premises or hospitals. Access cover made of acidproof stainless steel (quality 316) are available on order.

Model

Inner measure (cm) C x D

Outer measure (cm) A x B

Weight before filling (kg)

S/O*

BVE 33

30 x 30

43,5 x 43,5

9 kg

S

BVE 44

40 x 40

53,5 x 53,5

13 kg

S

BVE 55

50 x 50

63,5 x63,5

17 kg

S

BVE 64

60 x 40

73,5 x 53,5

16 kg

S

BVE 66

60 x 60

73,5 x 73,5

20 kg

O

BVE 86

80 x 60

93,5 x 73,5

24 kg

S

BVE 88

80 x 80

93,5 x 93,5

30 kg

S

BVE 106

100 x 60

113,5 x 73,5

29 kg

S

BVE 108

100 x 80

113,5 x 93,5

33 kg

S

BVE 110

100 x 100

113,5 x 113,5

40 kg

S

Cover depth: 5 cm, total structural height: 7.5 cm *S = IN STOCK

O= ORDER PRODUCT

The cross-sectional drawing of the stainless steel BV manhole 5

6

7

22

75

52

30

36

80

67,5

cxd

67,5

AxB 4

3

2

1

1. Frame 2. Cover 3. Seal 4. Reinforcement 5. Locking bolt 6. Shield plug 7. Fastening clip

If you need hatches with properties different from our standard models, contact our sales team for more information.

73


74 INSPECTION AND ACCESS HATCHES

www.dionepro.fi

BVA-SL SLIM ALU

Load capacity: 15 kN Material: Frame and cover sections in extruded aluminium. Stainless steel screws. Features: Odour and waterproof access cover in high-quality finish. Only 5 cm installation depth. Particularly suitable for situations where greater installation depths are not possible. The shallow trough results in a weight reduction when filled - so less effort is required to lift the cover. An unrestricted height of 14 mm is available for laying slabs, tiles or parquet flooring etc. Two chemical-resistant special seals. The cover is reinforced with a clamped steel mesh reinforcement. Recommended applications: For indoor access shafts, for which a pleasant appearance is required. Also, in places where floor finishes may require grinding or where particular attention must be paid to corrosion resistance.


www.dionepro.fi

INSPECTION AND ACCESS HATCHES

Model

Inner measure (cm) C x D

Outer measure (cm) A x B

Weight before S/O* filling (kg)

BVA-SL slim 22

20 x 20

72 x 144

2kg

O

BVA-SL slim 33

30 x 30

72 x 215

3 kg

O

BVA-SL slim 44

40 x 40

92 x 184

4 kg

O

BVA-SL slim 45

45 x 45

92 x 275

5 kg

O

BVA-SL slim 55

50 x 50

59 x 59

6 kg

O

BVA-SL slim 64

60 x 40

69 x 49

6kg

O

BVA-SL slim 66

60 x 60

69 x 69

7 kg

O

BVA-SL slim 635

63,5 x 63,5

72,5 x 72,5

8 kg

O

BVA-SL slim 77

70 x 70

79 x 79

9 kg

O

BVA-SL slim 86

80 x 60

89 x 69

9 kg

O

BVA-SL slim 88

80 x 80

89 x 89

10 kg

O

BVA-SL slim 106

100 x 60

109 x 69

10 kg

O

BVA-SL slim 108

100 x 80

109 x 89

12 kg

O

BVA-SL slim 110

100 x 100

109 x 109

14 kg

O

Cover depth: 39 mm / 14 mm Installation height: 5,0 cm

*S = IN STOCK

O= ORDER PRODUCT

vapaa korkeus 14 mm

75


76 INSPECTION AND ACCESS HATCHES

www.dionepro.fi

CLA ALUMINIUM ACCESS COVER, PREFILLED WITH A LIGHT COMPOSITE PLATE, WITH A SEAL Load endurance: 15 kN (walking-resistant). Material: the frame and cover edges are made of extruded aluminium, the base of aluminium plate. Properties: the access cover is well suited to 24 mm surface material at the maximum and prefilled with a light composite plate. The cover structure is lighter than in the manhole with a normal concrete filling. The access cover is gas and water-proof and manufactured with accurate dimensions. Thanks to its small corners and accurately dimensioned edge structure, the access cover is almost inconspicuous in the flooring after its installation. Ideal for locations where extremely high requirements are set for the appearance of the access coverâ&#x20AC;&#x2122;s visible edge. Applications: access cover that must be gas and water-proof in indoor use. To ensure waterproofness, the section between the access coverâ&#x20AC;&#x2122;s outer edge and the surrounding floor must be insulated with water-proof insulation. Model

Inner measure (cm) C x D

Outer measure (cm) A x B

Weight before filling (kg)

S/O*

CLA 22

20 x 20

32 x 32

3 kg

O

CLA 33

30 x 30

42 x 42

5 kg

O

CLA 44

40 x 40

52 x 52

7 kg

O

CLA 55

50 x 50

62 x 62

9 kg

O

CLA 64

60 x 40

72 x 52

9 kg

O

CLA 66

60 x 60

72 x 72

10 kg

O

CLA 86

80 x 60

92 x 72

12 kg

O

CLA 88

80 x 80

92 x 92

15 kg

O

CLA106

100 x 60

112 x 72

15 kg

O

Cover depth: 5 cm, total structural height: 7.5 cm *S = IN STOCK

O= ORDER PRODUCT

1. Frame 2. Cover 3. Seal 4. Locking bolt 5. Shield plug 6. Composite plate 7. Frame joint 8. Bolt thread 9. Frame The cross-sectional drawing of the CLA access cover


www.dionepro.fi

INSPECTION AND ACCESS HATCHES

CCA ALUMINIUM, HINGED, PREFILLED WITH A LIGHT COMPOSITE PLATE, WITH A SEAL Load endurance: 15 kN (walking-resistant). Material: the frame and cover edges are made of extruded aluminium, the base of aluminium plate. Properties: the access cover is well suited to 24 mm surface materials at the maximum and prefilled with a light composite plate. The cover structure is lighter than in the access cover with a normal concrete filling. The access cover is gas and water-proof and manufactured with accurate dimensions. Thanks to its small corners and accurately dimensioned edge structure, the access cover is almost inconspicuous in the flooring after its installation. Ideal for locations where extremely high requirements are set for the appearance of the manholeâ&#x20AC;&#x2122;s visible edge. Applications: access cover that must be gas and water-proof in indoor use. To ensure waterproofness, the section between the access coverâ&#x20AC;&#x2122;s outer edge and the surrounding floor must be insulated with water-proof insulation. Model

Inner measure (cm) C x D

Outer measure (cm) A x B

Weight before filling (kg)

S/O*

CCA 55

50 x 50

62 x 64

10 kg

O

CCA 66

60 x 60

72 x 74

12 kg

O

CCA 86

80 x 60

92 x 74

14 kg

O

CCA 88

80 x 80

92 x 94

17 kg

O

CCA 106

100 x 60

112 x 74

17 kg

O

Cover depth: 6.6 cm, total structural height: 7.6 cm *S = IN STOCK

O= ORDER PRODUCT

A cross-sectional drawing of the hinged BV aluminium access cover.

1. Frame 2. Cover 3. Seal 4. Locking bolt 5. Frame joint 6. Shield plug 7. Hinge 8. Frame joint 9. Frame 10. Support rod 11. Composite plate

The support rod keeps the cover open when required.

The light, hinged access cover is easy to open.

77


78 INSPECTION AND ACCESS HATCHES

www.dionepro.fi

BVS-250 STEEL MANHOLE FOR HEAVY VEHICLES GAS AND WATER-PROOF

Load endurance: 250 kN Material: the frame and cover are made of a steel profile. The structure is galvanised after welding. The manhole is equipped with reinforcement beams to enable heavy use. Properties: gas and water-proof manhole which is manufactured with accurate dimensions. The conical design and the lift key make it easy to open. Thanks to its small corners and accurately dimensioned edge structure, the manhole is almost inconspicuous in the flooring after its installation. The reinforcement inside the manhole improves structural load endurance. Applications: warehouses and loading platforms where industrial trucks are used.

Model

Inner measure (cm) C x D

Outer measure (cm) A x B

Weight before filling (kg)

S/O*

BVS 250/44

40 x 40

53,5 x 53,5

17 kg

O

BVS 250/55

50 x 50

63,5 x 63,5

26 kg

O

BVS 250/64

60 x 40

73,5 x 73,5

25 kg

O

BVS 250/66

60 x 60

73,5 x 73,5

31 kg

O

BVS 250/88

80 x 80

93,5 x 93,5

52 kg

O

BVS 250/106

100 x 60

113,5 x 73,5

52 kg

O

BVS 250/110

100 x 100

113,5 x 113,5

78 kg

O

Cover depth: 5 cm, total structural height: 7.5 cm The structural height is increased with a 10 cm I beam placed at the bottom of the access cover.. *S = IN STOCK O= ORDER PRODUCT

The cross-sectional drawing of the BVS-250 access cover 5

4

8

22

75

52

36

30

6

154

80

c x d A x B

67,5

7

1

3

1. Frame 2. Cover 3. Seal 4. Reinforcement

2

5. Locking bolt 6. Shield plug 7. Fastening clip 8. Reinforcement beam

The BVS-250 access coverâ&#x20AC;&#x2122;s bottom side is reinforced with I beams.


www.dionepro.fi

INSPECTION AND ACCESS HATCHES

BVS-400 STEEL ACCESS COVER FOR HEAVY VEHICLES GAS AND WATER-PROOF

The BVS-400 access coverâ&#x20AC;&#x2122;s bottom side is reinforced with I beams and the framework.

Load endurance: 400 kN. Material: the frame an dcover are made of a steel profile. Thu structure is galvanised after welding. The access cover is equipped with reinforcement beams and the steel framework to enable heavy use. Properties: gas and water-proof access cover which is manufactured with accurate dimensions. The conical design and the lift key make it easy to open. Thanks to its small corners and accurately dimensioned edge structure, the access cover is almost inconspicuous in the flooring after its installation. The reinforcement inside the access cover improves structural load endurance. Applications: factories, warehouses, loading platforms and driving routes. Withstands the load generated by industrial trucks and heavy vehicles Model

Inner measure (cm) C x D

Outer measure (cm) A x B

Weight before filling (kg)

S/O*

BVS 400/55

50 x 50

63,5 x 71,5

52 kg

O

BVS 400/64

60 x 40

73,5 x 61,5

50 kg

O

BVS 400/66

60 x 60

73,5 x 81,5

62 kg

O

BVS 400/88

80 x 80

93,5 x 101,5

103 kg

O

BVS 400/106

100 x 60

113,5 x 81,5

119 kg

O

BVS 400/110

100 x 100

113,5 x 121,5

175 kg

O

Cover depth: 5 cm, installation height: 18 cm (60 x 60-80 x 80) or 22 cm (100 x 100) *S = IN STOCK

O= ORDER PRODUCT 5

2

3

1

A x B

4

9

The cross-sectional drawing of the BVA-400 access cover

22

75

52

36

30

6

180 / 220

80 7 8

35

22

7

80 67,5

c x d

1. Frame 2. Cover 3. Seal 4. Reinforcement 5. Locking bolt 6. Shield plug 7. Fastening clip 8. The framework for reinforcement beams 9. Reinforcement beam

79


80 INSPECTION AND ACCESS HATCHES

www.dionepro.fi


www.dionepro.fi

INSPECTION AND ACCESS HATCHES

BV-GD STEEL ACCESS COVER WITH GAS SPRINGS AND BVE-GD STAINLESS STEEL ACCESS COVER WITH GAS SPRINGS GAS AND WATER-PROOF Load endurance:125 kN Material: the frame and cover are made of a 2 mm steel profile. The structure is galvanised after welding. The stainless steel product is made of 2 mm stainless steel (quality 304). The surface is passivated throughout after welding. The access cover is provided with high-quality gas springs. Properties: gas and water-proof access cover which is manufactured with accurate dimensions. The conical design and the lift key make it easy to open. Thanks to its small corners and accurately dimensioned edge structure, the access cover is almost inconspicuous in the flooring after its installation. Opening: gas springs that facilitate opening make it possible for one user to open the access cover without much effort. Applications: access cover that must be gas and water-proof in indoor and outdoor use. Ideal for locations where the access covermust be opened very often. Installation: gas springs are attached in place after the access cover has been installed and the concrete has hardened. Model

Inner measure (cm) C x D

Outer measure (cm) A x B

Weight before filling (kg)

S/O*

The number of springs

GALVANISED STEEL BV-GD 66

60 x 60

73,5 x 75,15

29 kg

O

1

BV-GD 86

80 x 60

93 ,5 x 75,15

36 kg

O

2

BV-GD 88

80 x 80

93,5 x 95,15

42 kg

O

2

BV-GD 106

100 x 60

113,5 x 75,15

40 kg

O

2

BV-GD 110

100 x 100

113,5 x 115,15

55 kg

O

2

BVE-GD 66

60 x 60

73,5 x 75,15

28 kg

O

1

BVE-GD 86

80 x 60

93,5 x75,15

35 kg

O

2

BVE-GD 88

80 x 80

93,5 x 95,15

41 kg

O

2

BVE-GD 106

100 x 60

113,5 x 75,15

40 kg

O

2

BVE-GD 110

100 x 100

113,5 x 115,15

53 kg

O

2

STAINLESS STEEL

Cover depth: 5 cm, total structural height: 7.5 cm *S = IN STOCK

5

6

7

22

75

52

36

30

80

O= ORDER PRODUCT

67,5

c x d

67,5

A x B 4

3

2

1

The cross-sectional drawing of the BVE-GD access cover.

1. Frame 2. Cover 3. Seal 4. Reinforcement 5. Locking bolt 6. Shield plug 7. Fastening clip 8. Gas spring The bottom side of the BV-GD access cover..

81


82 INSPECTION AND ACCESS HATCHES

www.dionepro.fi

BV-GDZ STEEL ACCESS COVER WITH GAS SPRINGS GAS AND WATER-PROOF OPENABLE FROM ABOVE AND BENEATH

Load endurance: 125 kN Material: the frame and cover are made of a 2 mm steel profile. The structure is galvanised after welding. Properties: gas and water-proof access cover which is manufactured with accurate dimensions. The conical design and the lift key make it easy to open. Thanks to its small corners and accurately dimensioned edge structure, the manhole is almost inconspicuous in the flooring after its installation. Opening: gas springs that facilitate opening make it possible for one user to open the access cover without much effort. The lock is opened from above with an Allen key and from below with a handle. Applications: access covers that must be gas and water-proof in indoor and outdoor use. Ideal for locations, such as service pits, where the access cover must be opened very often. Installation: gas springs are attached in place after the access cover has been installed and the concrete has hardened.


www.dionepro.fi

INSPECTION AND ACCESS HATCHES

Model

Inner measure (cm) C x D

Outer measure (cm) A x B

Weight before S/O* filling (kg)

The number of springs

BV-GDZ 66

60 x 60

73,5 x 75,15

30 kg

1

O

BV-GDZ 86

80 x 60

93,5 x 75,15

38 kg

O

2

BV-GDZ 88

80 x 80

93,5 x 95,15

44 kg

O

2

BV-GDZ 110

100 x 100

113,5 x 115,15

58 kg

O

2

Cover depth: 5 cm, installation height: 18 cm (60 x 60-80 x 80) or 22 cm (100 x 100)

2

6

5

4

8

3

7

182

52

1

O= ORDER PRODUCT

75

*S = IN STOCK

10 67,5

cxd

84

AxB

The cross-sectional drawing of the BV-GDZ access cover.

BV-GDZ luukun alapuolen lukitus.

55

1. Frame 2. Cover 3. Seal 4. Reinforcement 5. Locking bolt 6. Shield plug 7. Fastening clip 8. Gas spring 9. Opening handle

83


84 INSPECTION AND ACCESS HATCHES

www.dionepro.fi

BVH-MAXI STEEL ACCESS COVER

GAS AND WATER-PROOF CAN BE COVERED WITH YARD PAVING STONES

Load endurance: 125 kN Material: the frame and cover are made of a 2 mm steel profile. The structure is galvanised after welding. Properties: the gas and water-proof access cover is manufactured with accurate dimensions and has a 10 cm cover that can be coated. The conical design and the lift key make it easy to open. Thanks to its small corners and accurately dimensioned edge structure, the access cover is almost inconspicuous in the flooring after its installation. The reinforcement inside the access cover improves structural load endurance. Applications: access covers that must be gas and water-proof in indoor and outdoor use, when the cover is filled up with bricks, concrete slabs, or yard or street paving stones. Other models that can be filled up with yard paving stones: the easy-to-open BVH-GD MAXI access cover with gas springs and a load endurance of 125 kN; the reinforced BVHS 250 steel access cover with a load endurance of 250 kN that withstands the load generated by heavy vehicles; the reinforced BVHS 400 steel access cover with a load endurance of 400 kN that withstands the load generated by heavy vehicles. The cover depth of these models is 10.2 cm; several sizes available. Please consult our sales department for additional information!


www.dionepro.fi

INSPECTION AND ACCESS HATCHES

Model

Inner measure (cm) C x D

Outer measure (cm) A x B

Weight before S/O* filling (kg)

BVH maxi 44

40 x 40

55,2 x 55,2

22 kg

O

BVH maxi 55

50 x 50

65,2 x 65,2

27 kg

O

BVH maxi 66

60 x 60

75,2 x 75,2

28 kg

O

BVH maxi 86

80 x 60

95,2 x 75,2

35 kg

O

BVH maxi 88

80 x 80

95,2 x 95,2

40 kg

O

BVH maxi 106

100 x 60

115,2 x 75,2

40 kg

O

Cover depth: 10.2 cm, structural height: 12.5 cm *S = IN STOCK O= ORDER PRODUCT

3

4

6

2

1

125

86

102

5

7 76 80

c x d

76

A x B

The cross-sectional drawing of the BV-MAXI access cover.

The BV-MAXI access cover in the paving.

BV-MAXI access cover in the paving. 1. Frame 2. Cover 3. Seal 4. Reinforcement 5. Locking bolt 6. Shield plug 7. Fastening clip

The BV-MAXI access cover, partly filled up with paving stones.

85


86 INSPECTION AND ACCESS HATCHES

www.dionepro.fi

BVH-GD MAXI STEEL ACCESS COVER WITH GAS SPRINGS SYVĂ&#x201E; KANSIDEEP COVER CAN BE COATED WITH PAVING STONES

Load endurance: 125 kN Material: the frame and cover are made of a 2 mm steel profile. The structure is galvanised after welding. Properties: equipped with two gas springs. Easy to open. The gasproof and almost water-proof access cover is manufactured with accurate dimensions and has a 10 cm cover that can be coated. The conical design and the lift key make it easy to open. Thanks to its small corners and accurately dimensioned edge structure, the access coveris almost inconspicuous in the flooring after its installation. The reinforcement inside the access cover improves structural load endurance. Applications: access covers that must be gas and water-proof in indoor and outdoor use, when the cover is filled up with bricks, concrete slabs, or yard or street paving stones in objects where the access cover must be easy to open. The cover depth is 10.2 cm; several sizes available. Gas springs are delivered separately and installed in place as the last parts after the access cover has been cast and coated.


www.dionepro.fi

INSPECTION AND ACCESS HATCHES

Model

Inner measure (cm) C x D

Outer measure (cm) A x B

Weight before S/O* filling (kg)

BVH-GD maxi 66

60 x 60

75 x 75

52 kg

O

BVH-GD maxi 86

80 x 60

95 x 75

60 kg

O

BVH-GD maxi 88

80 x 80

95 x 95

64 kg

O

BVH-GD maxi 106

100 x 60

115 x 75

65 kg

O

Cover depth 10.2 cm, installation height 12.5 cm *S = IN STOCK

O= ORDER PRODUCT

The cross-sectional drawing of the BVH-GDZ access cover.

1. Frame 2. Cover 3. Seal 4. Reinforcement 5. Locking bolt

6. Shield plug 7. Fastening clip 8. Gas spring 9. Fastening bracket 10. Reinforcement

If you need hatches with properties different from our standard models, contact our sales team for more information.

87


88 INSPECTION AND ACCESS HATCHES

www.dionepro.fi

HL GALVANISED ACCESS COVER

The HL SI 66 manhole with a galvanised

The HL SI 33 access cover used upside down and coated with parquet.

Load endurance: 15 kN (walking-resistant). Material: the frame and cover are made of a 2 mm steel profile. (45 x 45 mm, 50 x 50 cm and 60 x 60 cm, the access cover made of 3 mm steel). The cover can be used by placing the plate surface up or by turning the cover upside down and coating the chute section. The depth of the coatable casing section: 15 mm. The selection includes manhole options painted on order in RAL tones. Properties: equipped with a seal but it is not entirely gas and water-proof. The 30 x 30 cm access cover is provided with mounting screws. The access cover is opened by lifting it with the screws. Other sizes of manholes are opened with a separate lifting handle. Their delivery does not include mounting screws. If the access cover with the lifting handle is coated, the lifting handle must be embedded in the coatingâ&#x20AC;&#x2122;s opening on the other side of the access cover. Applications: access covers in indoor use, when they must be coatable and made of inexpensive sheet metal. Installation: the access cover is fitted in the opening and fastened with screws through the foot part holes in the openingâ&#x20AC;&#x2122;s vertical edge. When necessary, the access cover can be attached with glue or mortar from the frame to the floor.

Model

Inner measure (cm) C x D

Outer measure (cm) A x B

Weight before S/O* filling (kg)

HL SI 33

30 x 30

35,5 x 35,5

3,7 kg

S

HL SI 45

45 x 45

50,5 x 50,5

8,7 kg

O

HL SI 55

50 x 50

55,5 x 55,5

10,2 kg

S

HL SI 66

60 x 60

65,5 x 65,5

12,6 kg

S

Structural height: 4.5 cm *S = IN STOCK O= ORDER PRODUCT


www.dionepro.fi

INSPECTION AND ACCESS HATCHES

HL RIFFLED-PLATE ACCESS COVER

Load endurance:15 kN (walking-resistant). Material: the frame is made of a 2 mm steel profile. The cover is made of 3 mm anti-slip riffled plate-coated aluminium. Properties: equipped with a seal but it is not entirely gas and water-proof. The 30 x 30 cm access cover is provided with mounting screws. The manhole is opened by lifting it with the screws. Other sizes of manholes are opened with a separate lifting handle. Their delivery does not include mounting screws. Applications: access covers in indoor use, when they must be made of inexpensive, antislip plate. They are available on order with stainless steel frames to allow their use in outdoor locations (if turned upside down, the other side can be coated if required). Installation: the access cover is fitted in the opening and fastened with screws through the foot part holes in the openingâ&#x20AC;&#x2122;s vertical edge. When necessary, the manhole can be attached with glue or mortar from the frame to the floor.

Model

Inner measure (cm) C x D

Outer measure (cm) A x B

Weight before S/O* filling (kg)

HL TL 33

30 x 30

35,5 x 35,5

2,9 kg

O

HL TL 45

45 x 45

50,5 x 50,5

4,8 kg

O

HL TL 55

50 x 50

55,5 x 55,5

7,8 kg

O

HL TL 66

60 x 60

65,5 x 65,5

9,2 kg

O

*S = IN STOCK

O= ORDER PRODUCT

89


90 INSPECTION AND ACCESS HATCHES

www.dionepro.fi

RVE-RST

GAS AND WATER-PROOF

Gas and water-proof, stainless steel Load endurance:15 kN Material: the frame, plate and reinforcement are made of stainless steel (quality 304) Properties: gas and water-proof model, flat structure. The special seal withstands chemicals well. The delivery includes an opening tool. Applications: pits in walking areas in buildings or in their neighbourhood, especially in objects that require perfect corrosion resistance. Model

Inner measure (cm) CxD

Outer measure (cm) A x B

Weight be- S/O* fore filling (kg)

RVE 22

20 x 20

30,5 x 30,5

6 kg

O

RVE 33

30 x 30

40,5 x 40,5

9 kg

O

RVE 44

40 x 40

50,5 x 50,5

13 kg

O

RVE 55

50 x 50

60,5 x 60,5

15 kg

O

RVE 54

60 x 40

70,5 x 50,5

15 kg

O

BVE 66

60 x 60

70,5 x 70,5

24 kg

O

RVE 86

80 x 60

90,5 x 70,5

30 kg

O

RVE 88

80 x 80

90,5 x 90,5

36 kg

O

RVE 106

100 x 60

110,5 x 70,5

36 kg

O

RVE 110

100 x 100

110,5 x 110,5

54 kg

O

*S = IN STOCK

O= ORDER PRODUCT


www.dionepro.fi

INSPECTION AND ACCESS HATCHES

RV-STEEL ACCESS COVER GAS AND WATER-PROOF

Load endurance:15 kN Material: the frame is made of 2 mm cold-formed, galvanised steel that has been profiled with precision tools. The access cover is made of embossed plate. Properties: gas and water-proof model, flat structure. The special seal withstands chemicals well. The delivery includes an opening tool. Applications: pits in walking areas in buildings and their neighbourhood; ideal for maintenance pits. Installation: the access cover must be installed exactly in accordance with its installation instructions. T o ensure waterproofness, the access coverâ&#x20AC;&#x2122;s outer edge must be attached tightly to the floor with casting. 1. Frame 2. Cover 3. Seal

4. Shield plug 5. Opening handle 6.Reinforcement

Model

Inner measure (cm) C x D

Outer measure (cm) A x B

Weight before S/O* filling (kg)

RV 64

60 x 40

70,5 x 50,5

22 kg

O

RV 66

60 x 60

70,5 x 70,5

29 kg

O

RV 86

80 x 60

90,5 x 70,5

37 kg

O

RV 88

80 x 80

90,5 x 90,5

45 kg

O

*S = IN STOCK

O= ORDER PRODUCT

91


92 INSPECTION AND ACCESS HATCHES

www.dionepro.fi

RVA- ALU

GAS AND WATER-PROOF . Load endurance:15 kN Material: the frame is made of extruded aluminium profile. The bottom side reinforcement is made of aluminium. Properties: gas and water-proof model, flat structure. The special seal withstands chemicals well. The delivery includes an opening tool. Applications: pits in walking areas in buildings and their neighbourhood, ideal for objects that require corrosion resistance and/or withstand only minor loads. Installation: the manhole must be installed in accordance with its installation instructions. To ensure waterproofness, the manholeâ&#x20AC;&#x2122;s outer edge must be attached tightly to the floor with casting.

Model

Inner measure (cm) C x D

Outer measure (cm) A x B

Weight before filling (kg)

S/O*

RVA 33

30 x 30

38,5 x 38,5

3 kg

O

RVA 55

50 x 50

58,5 x 58,5

5 kg

O

RVA 64

60 x 40

68,5 x 48,5

5 kg

O

RVA 66

60 x 60

68,5 x 68,5

8 kg

O

RVA 86

80 x 60

88,5 x 68,5

10 kg

O

RVA88

80 x 80

88,5 x 88,5

12 kg

O

RVA 106

100 x 60

108,5 x 68,5

12 kg

O

RVA 110

100 x 100

108,5 x 108,5

18 kg

O

*S = IN STOCK

O= ORDER PRODUCT

1. Frame 2. Cover plate 3. Seal 4. Shield plug 5. Opening handle 6. Reinforcement

If you need hatches with properties different from our standard models, contact our sales team for more information.


www.dionepro.fi

INSPECTION AND ACCESS HATCHES

93

HL STAINLESS STEEL ACCESS COVER Load endurance: 15 kN (walking-resistant). Material: the frame and cover are made of a 2 mm stainless steel profile (45 x 45 mm, 50 x 50 cm and 60 x 60 cm; the access cover cover made of 3 mm stainless steel). The cover can be used by placing the plate surface up or by turning the cover upside down and coating the chute section. The depth of the coatable casing section: 15 mm. Properties: equipped with a seal but it is not entirely gas and waterproof. The 30 x 30 cm manhole is provided with mounting screws. The access cover is opened by lifting it with the screws. Other sizes of access coverS are opened with a separate lifting handle. Their delivery does no include mounting screws. If the access covers equipped with the lifting handle is coated, the lifting handle must be embedded in the coating on the other side of the access covers. Applications: indoor and outdoor access covers when it is necessary to use a plate-surface manhole or an easy-to-coat stainless steel access covers. Installation: the access cover is fitted in the opening and fastened with screws through the foot part holes in the openingâ&#x20AC;&#x2122;s vertical edge. When necessary, the manhole can be attached with glue or mortar from the frame to the floor. Model

Inner measure (cm) CxD

Outer measure (cm) AxB

Weight before filling (kg)

S/O*

HL RST 33

30 x 30

35,5 x 35,5

3,7 kg

O

HL RST 45

45 x 45

50,5 x 50,5

8,7 kg

O

HL RST 55

50 x 50

55,5 x 55,5

10,2 kg

O

HL RST 66

60 x 60

65,5 x 65,5

12,6 kg

O

*S = IN STOCK

O= ORDER PRODUCT

BR STEEL ACCESS COVER Material: galvanised steel after welding. Properties: the access cover is manufactured with accurate dimensions and equipped with a ventilation pipe. Hinged model that can be locked with a padlock. The ventilation pipe is provided with an insect net. When open, the manhole can be detached entirely. When necessary, the delivery may include the seal. Applications: wells, containers and water supply plants. Other materials: The BR access cover selection also includes an option made of stainless steel. It is suitable for objects that must be corrosion-resistant (model BRE-D).

Model

Inner measure (cm) C x D

Outer measu- Weight before S/O* re (cm) A x B filling (kg)

BR-D 55

49,5 x 49,5

56,5 x 56,5

15 kg

O

BR-D 66

59,5 x 59,5

66,5 x 66,5

18 kg

O

BR-D 88

79,5 x 79,5

86,5 x 86,5

21 kg

O

BRE-D 55

50,0 x 50,0

56,5 x 56,5

12 kg

O

BRE-D 66

60,0 x 60,0

66,5 x 66,5

15 kg

O

BRE-D 88

80,0 x 80,0

86,5 x 86,5

23 kg

O

*S = IN STOCK

O= ORDER PRODUCT

1. Frame 2. Cover plate 3. Seal (accessory) 4. Padlockâ&#x20AC;&#x2122;s handle 5. Ventilation pipe with an insect net 6. Hinge The cross-sectional drawing of the BR access cover


94 INSPECTION AND ACCESS HATCHES

www.dionepro.fi

BV THERMO ACCESS COVER GAS AND WATER-PROOF WITH THERMAL INSULATION Load endurance: 125 kN Material: the frame and cover are made of a 2 mm steel profile. The structure is galvanised after welding. The access cover is equipped with a detachable aluminium-coated thermal insulation plate. Properties: gas and water-proof access cover which is manufactured with accurate dimensions. The conical design and the lift key make it easy to open. Thanks to its small corners and accurately dimensioned edge structure, the access cover is almost inconspicuous in the flooring after its installation. The reinforcement inside the access cover improves structural load endurance. Applications: access cover that must be gas and water-proof in indoor and outdoor use, when special requirements are set for the access coverâ&#x20AC;&#x2122;s thermal insulation ability. Installation: to ensure the best thermal insulation ability for the access cover, the gap between the access cover and the surrounding floor must be sealed with care. Model

Inner Outer measure measure (cm) (cm) C x D A x B

Weight S/O* before filling (kg)

BV-Thermo 55

50 x 50

63,5 x 63,5

19 kg

O

BV-Thermo 66

60 x 60

73,5 x 73,5

23 kg

O

BV-Thermo 86

80 x 60

93,5 x 93,5

29 kg

O

BV-Thermo 88

80 x 80

93,5 x 93,5

33 kg

O

BV-Thermo 106

100 x 60

113,5 x 73,5

33 kg

O

100 x 100

113,5 x 113,5

45 kg

O

BV-Thermo 110 *S = IN STOCK

5

2

9

8

4

10

3

7

30

6

138

22

52

75

1

O= ORDER PRODUCT

67,5 4

80

c x d A x B

67,5 80

1. Frame 2. Cover 3. Seal 4. Reinforcement 5. Locking bolt 6. Shield plug 7. Fastening clip 8. Insulation plate 9. Opening handle for insulation plate 10. Insulation plate frame

If you need hatches with properties different from our standard models, contact our sales team for more information.


www.dionepro.fi

BVA-RA MULTI STEEL ACCESS COVER BVE-RA MULTI STAINLESS STEEL ROW ACCESS COVER Load endurance:125 kN Material: The frame and cover of the BV-RV access cover is made of a 2 mm steel profile. The structure is galvanised after welding. The frame of the BVE-RA manhole is made of 2 mm stainless steel (quality 304). The surface is passivated throughout after welding. access covers made of acid-proof stainless steel (quality 316) are also available.

Properties: theaccess cover has two or more parts and a seal and is manufactured with accurate dimensions. Almost gas and waterproof (if subject to continuous water flow, some water may leak out from between the cover and the frame). The reinforcement in the access cover improves structural load endurance.

The patented intermediate spoke detachable without tools allows the access cover to be opened across its whole length. The height of the access cover chute is about 50 mm. The access covercan be equipped with a higher 100 mm chute on order. The chute is filled up with yard paving stones. Applications: challenging objects, such as those in industrial premises and airports. Dimensions: steel and stainless steel row access cover are made to order in accordance with accurate dimensions. We have made row access covers, for instance, for sewers with several tens of access covers in parallel.

INSPECTION AND ACCESS HATCHES

95


96 INSPECTION AND ACCESS HATCHES

www.dionepro.fi

BVA ALUMINIUM ROW ACCESS COVER Load endurance: 125 kN Material:the frame and cover edges are made of extruded aluminium,the base of aluminium plate. Properties: the two or three-part access cover with a seal is manufactured with accurate dimensions. Thanks to its small corners and accurately dimensioned edge structure, the manhole is almost inconspicuous in the flooring after its installation. Ideal for locations where extremely high requirements are set for the appearance of the access coverâ&#x20AC;&#x2122;s visible edge. The reinforcement in the access cover improves structural load endurance. The patented detachable intermediate spoke allows the access cover to be opened across its whole length. Properties: the access cover has two or more parts and a seal and is manufactured with accurate dimensions. Almost gas and water-proof (if subject to continuous water flow, some water may leak out from between the cover and the frame). The reinforcement in the access cover improves structural load endurance. Applications: challenging access covers in indoor use when high requirements are set for the appearance of the access coverâ&#x20AC;&#x2122;s visible cover edges, or when the floor must be ground afterwards (e.g. parquet floors).

Model

Inner measure (cm) C x D

Outer measure (cm) A x B

Weight before S/O* filling (kg)

BVA multi 2-part

60 x 132

72 x 144

23 kg

O

BVA multi 3-part

60 x 203

72 x 215

32 kg

O

BVA multi 2-part

80 x 172

92 x 184

33 kg

O

BVA multi 3-part

80 x 263

92 x 275

47 kg

O

Cover depth: 6.6 cm, total structural height: 7.6 cm *S = IN STOCK

O= ORDER PRODUCT


www.dionepro.fi

1

6

5

4

7

2

A x B

10

3

1 60

157 - 200

76,5

65,5

76,5

c x d

INSPECTION AND ACCESS HATCHES

11

60 8

9

12

10

The cross-sectional drawing of the BVA row access cover.

12

1. Frame 2. Cover 3. Seal 4. Reinforcement 5. Locking bolt 6. Shield plug 7. Base plate 8. Corner welding 9. Locking nut 10. Divider 11. Divider seal 12. Divider locating sleeve

97


98 INSPECTION AND ACCESS HATCHES

www.dionepro.fi

BVA-RA ALUMINIUM ROW ACCESS COVER

Load endurance: 125 kN Material: the frame and cover edges are made of extruded aluminium, the base of aluminium plate. Properties: gas and water-proof row access cover which is manufactured with accurate dimensions. Thanks to its small corners and accurately dimensioned edge structure, the manhole is almost inconspicuous in the flooring after its installation. Ideal for locations where extremely high requirements are set for the appearance of the access coverâ&#x20AC;&#x2122;s visible edge. The reinforcement in the access cover improves structural load endurance. The patented detachable intermediate spoke allows the access cover to be opened across its whole length. The delivery of more than 3-metre long row access cover includes separate side frames that are easy to lengthen. Almost gas and waterproof (if subject to continuous water flow, some water may leak out from between the cover and the frame). The reinforcement in the access cover improves structural load endurance. Applications: challenging access cover in indoor use when high requirements are set for the appearance of the access coverâ&#x20AC;&#x2122;s visible cover edges, or when the floor must be ground afterwards (e.g. parquet floors). Ideal for cable and HEPAC ducts that must be opened across their whole length.

1

6

5

4

7

2

A x B

10

3

1 60

157 - 200

76,5

65,5

76,5

c x d

11

60 8

9

12

The cross-sectional drawing of the BVA row access cover.

10

12

2. Cover 3. Seal 4. Reinforcement 5. Locking bolt 6. Shield plug 7. Base plate 8. Corner welding 9. Locking nut 10. Divider 11. Divider seal 12. Divider locating sleeve


www.dionepro.fi

INSPECTION AND ACCESS HATCHES

The light, hinged access cover is easy to open.

Row access cover installed in the corridor of a museum.

HATCH OPENING DEVICE With our dual hatch opening device, even a single person can open heavy coated hatches. The opening devices are screwed to the corners of the hatch in place of lifting handles. The hatch is opened by turning the mechanism, while pushing the hatch outside the opening on rollers.

Model

Product code

S/O*

2-part hatch opening device

BV-LIFT

S

* S = IN STOCK

O=ORDER PRODUCT

99


Handrails and impact guards Good and safe hygienic solutions that last for a long time in health care premises.

The DionePro vinyl handrails and impact guards are easy-to-clean and protected against bacteria. The vinyl-coated protective products are durable in premises subject to heavy use, such as hospitals and health centres. They are also commonly used in assisted living facilities, offices and ships. The vinyl products designed to protect real estates are shock-proof and help keep inner surfaces of the real estates in good condition for a long time. The colour of the vinyl protection profiles can be chosen from among 60 different colour options! The selection includes different handrail options, impact guide options mounted horizontally on the wall and outer corner protection profiles mounted on the walls. All products are available in tones that fit in with each other. The delivery includes all mounting accessories as well as end and connection pieces.


102IMPACT GUARDS, HANDRAILS AND SUPPORT

www.dionepro.fi


www.dionepro.fi

IMPACT GUARDS, HANDRAILS AND SUPPORT 103

VINYL-COATED HANDRAILS WITH ALUMINIUM FRAME The easily cleaned and durable handrail solutions are well suited to hospitals, nursing homes and other public premises. All vinyl-coated handrails and impact guards are made on order and in tones that fit in with each other. Material: made of vinyl-coated aluminium. Standard measure 3.66 m. The selection includes 60 colour options. Fastening:easy and quick to mount. The delivery includes mounting accessories. End and corner pieces are available. Applications: a durable handrail solution for many premises, such as offices, hotels, schools, shopping centres, hospitals and other public premises.

BR-400V Width/type

Length Product code

BR400V handrail/impact guard

365 cm

S/O*

BR400V

O

BR400V corner piece

OBR-450V

O

BR400V bracket

BR-108

O

BR400V end piece (left)

BRL425V

O

BR400V end piece (right)

BRR425V

O

*S = IN STOCK O= ORDER PRODUCT, DELIVERY TIME 3 MONTHS

Assembly drawing (all necessary parts included)

BR-400V 1. 1 1/2â&#x20AC;? diameter 2. Vinyl handrail 3. Decoration strip 4. Mounting screws 5. Vinyl impact guard 6. Impact absorber 7. Aluminium frame 8. Wall bracket 9. Wall reinforcement

BR-400V 1. BRL-425V end piece 2. 3 1/8â&#x20AC;? diameter 3. Mitre joint in the inner corner 4. BRA-400V aluminium frame 5. OBR-450V outer corner

6. Factory-made joint extension 7. BR-108 clip 8. BRV-1200 vinyl-coated surface section 9. BRR-425V end piece 10. B-100 impact absorber 11. BRI-400V decoration 12. WGV-4 vinyl-coated surface section


104IMPACT GUARDS, HANDRAILS AND SUPPORT

www.dionepro.fi


www.dionepro.fi

IMPACT GUARDS, HANDRAILS AND SUPPORT 105

BR-500V Width/type

Length

Product code

S/O*

BR500V handrail/impact guard

365 cm

BR-500V

O

BR500V corner piece

IOC-527

O

BR500V bracket

BR-107

O

BR500V end piece

BR-527

O

*S = IN STOCK O= ORDER PRODUCT, DELIVERY TIME 3 MONTHS

Assembly drawing (all necessary parts included)

BR-500V 1. 1 1/2” diameter 2. Vinyl-coated surface section 3. Mounting screws

4. Aluminium frame 5. Wall bracket 6. Wall reinforcement

BR-500V 1. 2 15/16” 2. BR-527 end piece 3. IOC-557 inner/outer corner 4. IOC-557 inner/outer corner

5. BRV-500 vinyl-coated surface section 6. Factory-made joint extension 7. BRA-500 aluminium frame 8. BR-107 clip 9. BR-527 end piece

BR-1200 Width/type

Length

BR1200 handrail/impact guard

365 cm

BR1200 corner piece

Product code

S/O*

BR-1200

O

IOC-1250

O

BR1200 bracket

BR-1206

O

BR1200 end piece (right)

BRR-1225

O

BR1200 end piece (left)

BRL-1225

O

*S = IN STOCK O= ORDER PRODUCT, DELIVERY TIME 3 MONTHS

Assembly drawing (all necessary parts included)

BR-1200 4. Wall bracket 1. Aluminium frame 5. Mounting screws 2. 1 1/2” diameter 6. Wall reinforcement 3. Vinyl-coated surface section

BR-1200 1. BRL-1225 end piece 2. BRV-1200 vinyl-coated surface section 3. IOC-1250 inner/outer corner

4. IOC-1250 inner/outer corner 5. BR-1206 clip 6. Factory-made joint extension 7. BRA-1200 aluminium frame 8. BRR-1225 end piece 9. 3”


106IMPACT GUARDS, HANDRAILS AND SUPPORT

www.dionepro.fi


www.dionepro.fi

IMPACT GUARDS, HANDRAILS AND SUPPORT 107

CLIP-FASTENED VINYL IMPACT GUARDS The surface of clip-fastened vinyl-coated impact guards is easy to keep clean. The clip-fastened guards are equipped with impact-absorbing springs. The delivery includes end pieces if required. Material: easy-to-clean vinyl coating. Mounting clips are provided with impact- absorbing springs. Fastening: easy and quick to mount. End pieces are available. Applications: offices, hotels, schools, shopping centres, hospitals and other public premises. Width/type

Length

Product code

S/O*

WG-6C impact guard

365 cm

WG-6C

O

WG-6C end piece

ETC-6C

O

WG-6C corner piece (outer)

OTC-6C

O

WG-6C bracket clip

WG-6C-ASM-1

O

WG-8C

O

WG-8C end piece

ETC-8C

O

WG-8C corner piece (outer)

OTC-8C

O

WG-8C impact guard

365 cm

WG-8C bracket clip WG-5C impact guard

WG-5C

O

WG-5C end piece

365 cm

ETC-5C

O

WG-5C corner piece (outer)

OTC-5C

O

WG-5C corner piece (inner)

ITC-5C

O

WG-5C bracket clip

WG-8C-ASM-1

O

WG-7C impact guard

WG-7C

O

WG-7C end piece

ETC-7C

O

WG-7C corner piece (outer)

OTC-7C

O

WG-7C corner piece (inner)

ITC-7C

O

WG-7C bracket clip

WG-7C-ASM-1

O

*S = IN STOCK MONTHS

365 cm

O= ORDER PRODUCT, DELIVERY TIME 3

WG-5C, WG-6C, WG-7C, WG-8C 1. Mounting screws 2. Vinyl-coated surface section

WG-5C cross-sectional drawing

3. Mounting clip 4. Brackets for end pieces

WG-6C cross-sectional drawing

WG-7C cross-sectional drawing

WG-8C cross-sectional drawing


108IMPACT GUARDS, HANDRAILS AND SUPPORT

www.dionepro.fi


www.dionepro.fi

IMPACT GUARDS, HANDRAILS AND SUPPORT 109

PLASTIC-FRAMED VINYL-COATED CORNER PROTECTION PROFILE The shock-resistant vinyl-coated corner protection profile protects efficiently against dents. Available in tones that fit in with the rest of the interior decoration. The delivery includes end pieces. Material: easy-to-clean vinyl coating. The mounting rail is made of flexible recycled plastic. Fastening: easy and quick to mount. End pieces are available. Applications: offices, hotels, schools, shopping centres, hospitals and outer corners in other public premises. Width/type

Length

Product code S/O*

51 x 51 mm, corner protection profile

244 cm

CG-20R

O

76 x 76 mm, corner protection profile

244 cm

CG-10R

O

19 x 19 mm, corner protection profile

244 cm

CG-34

O

38 x 38 mm, kcorner protection profile

244 cm

CG-12

O

76 x 76 mm, corner protection profile

244 cm

CG-13

O

102 x 102 mm, corner protection profile

244 cm

CG-14

O

38 x 38 mm, corner protection profile

244 cm

CG-1245

O

*S = IN STOCK

CG-10R

O= ORDER PRODUCT

CG-20R


110IMPACT GUARDS, HANDRAILS AND SUPPORT

www.dionepro.fi


www.dionepro.fi

IMPACT GUARDS, HANDRAILS AND SUPPORT 111

VINYL SHEETS FOR WALLS

VINYL SHEETS FOR WALLS

PROFILES FOR VINYLSHEETS

Product code

Thickness Min. delivery

S/O*

WC-30

0,8 mm

30 pcs

O

WC-40

1,0 mm

20 pcs

O

WC-60

1,5 mm

16 pcs

O

WC-80

2,0 mm

12 pcs

O

WC-90

2,3 mm

10 pcs

O

WC-125

3,2 mm

8 pcs

O

*S = IN STOCK

O=ORDER PRODUCT

Product code

Thickness

Length

S/O*

WC-98

0,8-1,5 mm

2,4 m / 3,04 m

O

WCT-98

2,0-2,3 mm

2,4 m / 3,04 m

O

WCTH-98

3,2 mm

2,4 m / 3,04 m

O

WC-99

0,8-1,5 mm

2,4 m / 3,04 m

O

WCT-99

2,0-2,3 mm

2,4 m / 3,04 m

O

WCTH-99

3,2 mm

2,4 m / 3,04 m

O

WC-100

0,8-1,5 mm

2,4 m / 3,04 m

O

WCT-100

2,0-2,3 mm

2,4 m / 3,04 m

O

WCTH-100

3,2 mm

2,4 m / 3,04 m

O

WC-101

0,8-1,5 mm

2,4 m / 3,04 m

O

WCT-101

2,0-2,3 mm

2,4 m / 3,04 m

O

3,2 mm

2,4 m / 3,04 m

O

Finishing profiles

Cover strips

Inner corner profiles Standard sheet dimensions are 122 cm x 244 cm. Other sizes are also available as special deliveries: 91 x 274 cm, 91 x 304 cm, 122 x 274 cm ja 122 x 274 cm.

Outer corner profiles

Sheets cut to specific sizes are also available.

WCTH-101

*S = IN STOCK

O=ORDER PRODUCT


112IMPACT GUARDS, HANDRAILS AND SUPPORT

www.dionepro.fi


www.dionepro.fi

IMPACT GUARDS, HANDRAILS AND SUPPORT 113

COLOUR MAP Our colour map for vinyl materials enables you to emphasise or fade out elements and shapes with soft protection profiles and handrails.

(10) White

(301) LinenWhite

(554) Mission White

(541) White Sand

(361) Pearl

(370) Eggshell

(411) Prumice

(555) Porcelain

(193) Wheat

(2) Ivory

(263) Pale Yellow

(569) Saffron

(313) Champagne

(648) Monterey

(497) Chablis

(676) Dover White

(268) Doeskin

(379) Mojave Sand

(148) Desert Sand

(3) Tan

(682) Khaki Brown

(718) Silkworm

(21) Cappuccino

(113) Toffee

(204) Shell

(486) Caisson

(359) Ginger Spice

(288) Mocha

(694 CafĂŠ Au Lait

(4) Brown

(385) Beige Desert

(269) Ecru

(22) Woodlands

(293) See Foam

(377) Teal

(382) Stormy Blue

(371) Sage Green

(376) Pale Jade

(29) Blue Ice

(369) Blue Fog

(265) Windsor Blue

(490) Blue Bird

(520) Brittany Blue

(583) Alexis Blue

(176) Taupe

(238) Bone

(483) Harvard Gray

(297) Chinchilla

(210) Silver Gray

(289) Pearl Gray

(494) (366) Lavender Hetather Soft Peach

(381) Dawn

(304) (373) English Rose Victorian Rose

(300) Grotto

(5) Gray

(380) Cordovan

(156) Hunter Green

(1) Black

The tones in the colour map are suggestive. Please check the tones from the material map in connection with ordering.


114IMPACT GUARDS, HANDRAILS AND SUPPORT

www.dionepro.fi


www.dionepro.fi

IMPACT GUARDS, HANDRAILS AND SUPPORT 115

SHOPPING TROLLEY SHELTERS Trolley shelters are ideal for protecting walls in shops and hospitals, for example.

EB-10

EB-1

• Aluminium frame • Durable and flexible vinyl coating • End pieces for the profile are available. • A total of 6 colour options available (black, ivory, tan, brown, gray and polar white)

EB -10 EB-5 end piece Flexible vinyl-coated profile

Mitre joint of inner corners

EBV-10 Jflexible vinyl-coated profile

Mounting screwsfastened to the wall at intervals of 45 cm EB-5 end piece Steel rail

Outer corners

Steel rail

EB-1 EBP-2 end piece

Flexible vinyl-coated profile Mitre joint of innercorners Mounting screws fastened to the wall at intervals of 80 cm

Aluminium rail Flexible vinyl-coated profile Factorymade joint

Aluminium mounting rail Outer corner


116IMPACT GUARDS, HANDRAILS AND SUPPORT

www.dionepro.fi

CORNER PROTECTION PROFILES FOR PARKING HALLS Rubber corner protection profiles are well suited to extremely hard indoor and outdoor use. Applications: - parking halls and industrial premises

CG-2E HEAVY-DUTY CORNER PROTECTION PROFILE, BLACK Minimum corner radius 14 mm 22 mm radius

Fastened with screws at intervals of 90 cm

Equipped with holes at the installation stage

Corner protection profile

CG-4 CORNER PROTECTION PROFILE, BLACK 32 mm radius

CG-15 HEAVY-DUTY CORNER PROTECTION PROFILE, BLACK OR YELLOW

End piece

Delivered without holes (glue-fastened)

Steel mounting rail EDPM rubber profile Mounting screws

Specified height

End piece Skirting profile

Corner protection

Specified height


www.dionepro.fi

IMPACT GUARDS, HANDRAILS AND SUPPORT 117

IMPACT GUARDS FOR PARKING HALLS Rubber corner protection profiles are well suited to extremely hard indoor and outdoor use. Applications: - parking halls, industrial premises, loading platforms

WT-25

E-1

D-3

M-2

IMPACT GUARDS FOR MARINE TRAFFIC MD-5 Weather-proof impact guard is ideal for extremely hard outdoor use. Applications: • quays • ships


118IMPACT GUARDS, HANDRAILS AND SUPPORT

www.dionepro.fi

WOODEN HANDRAILS


www.dionepro.fi

IMPACT GUARDS, HANDRAILS AND SUPPORT 119

ROUND WOODEN HANDRAIL Round wooden handrail manufactured from dual-glued laminated timber. Glued laminated handrails are straighter than handrails made from a single piece of wood. The product code is for a running metre (the delivery length varies; extra price for handrails cut to length). The wall bracket is attached to the wall and below the handrail with screws. Inner/outer pieces are attached with glue and wooden pins or with glue and furniture screws with threads at both ends. The end piece for the handrail is manufactured from the corner piece by shortening one end and attached similarly to inner/ outer corners. Upon special order, stained handrails are also available, providing a special wood tone. ROUND WOODEN HANDRAIL Diameter/model

Colour

Product code

S/O*

Wooden handrail  38 mm

lacquered birch

HR38W BIRCH

S

Wooden handrail  38 mm

lacquered oak

HR38W OAK

S

Wooden handrail  38 mm

milk oak

HR38W MILKOAK

O

Wooden peeled corner piece  38 mm

lacquered birch

CP38W BIRCH

S

Wooden peeled corner piece  38 mm

lacquered oak

CP38W OAK

S

Wooden peeled corner piece  38 mm

milk oak

CP38W MILKOAK

O

Vinyl wall-mounted fitting

zamak

BR-3500

S

*S = IN STOCK

O= ORDER PRODUCT

DELIVERY TIME 3 MONTHS

SQUARE WOODEN HANDRAIL Square wooden handrail manufactured of dual-glued laminated timber. Glued laminated handrails are straighter than handrails made of a single piece of wood. The product code is for a running metre (the delivery length varies; extra price for handrails cut to length). The vinyl wall bracket is attached to the wall and below the handrail with screws. The wall bracket is available in 60 different tones according to the colour chart for vinyl impact guards. Inner/outer corners for the square handrail and the end piece are manufactured by mitre cutting upon installation and attached with glue and wooden pins or with glue and furniture screws with threads at both ends. SQUARE WOODEN HANDRAIL Diameter/model

Colour

Product code

S/O*

Wooden handrail  38 mm

lacquered birch

HR38W BIRCH

S

Wooden handrail 38 mm

lacquered oak

HR38W OAK

S

Wooden handrail  38 mm

milk oak

HR38W MILKOAK

O

Revolved wooden corner piece  38 mm

lacquered birch

CP38W BIRCH

S

Revolved wooden corner piece  38 mm

lacquered oak

CP38W OAK

S

Revolved wooden corner piece  38 mm

milk oak

CP38W MILKOAK

O

Vinyl wall-mounted fitting

zamak

BR-3500

O

*S = IN STOCK

O= ORDER PRODUCT


120IMPACT GUARDS, HANDRAILS AND SUPPORT

www.dionepro.fi


www.dionepro.fi

IMPACT GUARDS, HANDRAILS AND SUPPORT 121

FLOOR PROFILES FOR THE VISUALLY IMPAIRED STAINLESS STEEL (AISI 304) The visually impaired can feel the floor profiles with their cane and feet. When installed in an unbroken line, they act as guides for finding your way.. When installed crosswise in several rows, they give warnings of stairways, station platform edges or other hazards. Stud-like profiles are installed by drilling a suitable hole in the floor surface and gluing them using Duuri installation adhesive. The rectangular model is installed by gluing it to a clean, dry and grease-free floor surface.

FLOOR PROFILES FOR THE VISUALLY IMPAIRED Diameter/model

Diameter

Depth

Product code

S/O*

Round  35 mm, pyramid pattern

 30 mm

3 mm

35-304-1

O

Round  35 mm, groove pattern

 30 mm

3 mm

35-304-2

O

Round  35 mm, pyramid pattern

 6 mmi

12 mm

35-304-3

O

Round  35 mm, groove pattern

 6 mm

12 mm

35-304-4

O

33 mm

277-304-1

O

Rectangle 277 mm x 33 mm, pyramid pattern

*S = IN STOCK

O= ORDER PRODUCT


122 PROFILES FOR PUBLIC PREMISES

www.dionepro.fi

FREQUENTLY ASKED QUESTIONS PROFILES How to cut stainless steel profiles? The easiest way is to use a wheel fit for cutting stainless steel. The wheel is attached to an angle grinder. The profiles are cut to mitre by using a suitable cutoff saw/metal blade combination, or a bandsaw fit for cutting stainless steel. Individual profiles are easy to cut and saw to mitre with a hacksaw as well.

INSPECTION AND ACCESS HATCHES

How to ensure waterproofness when mounting a hatch/access cover in place? The stainless steel and steel manholes with seals are water-proof. The base plate of aluminium manholes is welded with spot welding (e.g.BVA). If the manufacturing method requires an absolutely water-proof solutio, the manhole must be cast with water-proof cincrete, or the bottom side of the flooring provided with water-proof insulation. The connection point between the floor and the manhole fame must be made water-tight by using a suitable additive in the concrete when manhole edges are attached to the floor by casting. If in doubt, please consult our sales department for additional information. Is it possible to mount the access cover directly on the floor at the surface casting stage? Pay special attention to potential shrinkage and expansion at the casting’s drying stage. The manhole cover must be in place in the frame during installation. Use flexible wedges (minimum width 10 mm) in the outer edges of the frame, if necessary. Remove the wedges when the surface casting has dried. Seal the grooves after this with a flexible sealing compound.

HANDRAILS

What is the easiest way to clean vinyl-coated handrails and impact guards? The vinyl surface can be cleaned with standard detergents during general cleaning. Is it possible to change the vinyl surface strip when necessary without replacing the whole profile? The surface strip in DionePro vinyl profiles can be replaced during renovation and when the decoration tones are changed. As it is mounted directly on top of the old aluminium strip, it is not necessary to replace the whole profile, which saves costs and natural resources.

www.dionepro.fi

Are DuuriPro products fit for premises with a swimming pool? If in contact with chlorinated water, the profiles or manholes must be made to order from acid-proof steel. Tiling profiles can also be made of plastic. The delivery time for made-to-order, acid-proof steel manholes is 3–4 weeks and the delivery time of skirtings is 2–3 weeks.

Why is there a dent outwards from the inside in one of the access cover edges? Has the access cover been damaged during transport? The dent is a locating mark. It ensures that the manhole is easy to close after opening. Closing the manhole in the same position after it has been opened makes it possible to put it easily in place, in spite of the stress that might have occurred in the manhole at the calvanising or casting stage. The dent is not transport damage but a specifically designed detail to prove that the quality of the design and finish is excellent.

How to lengthen vinyl handrails in long corridors? The delivery includes an appropriate number of extension pieces to make it possible to connect the extension points with each other. It is advisable to prepare extension points from factory-made ends to ensure that the joint is inconspicuous.

www.dione.fi


Duuri Oy’s sales and delivery terms 1. Scope of application These Duuri Oy’s sales and delivery terms shall, unless otherwise agreed, be applied in transactions concerning trade in goods (hereinafter “products”) between Duuri Oy and its customer (hereinafter also the Buyer), where Duuri Oy is the seller of the goods. The Buyer and Duuri Oy are referred to jointly as the Contracting Parties. When placing an order, the Buyer accepts these sales and delivery terms. 2. Offer 2.1 Duuri Oy may give a written offer concerning the products to the Buyer. The offer shall be valid for 30 days from the date of the offer, unless otherwise stated in the offer. 2.2 A contract comes into being when the Buyer accepts the offer during the period of validity of Duuri Oy’s offer. 2.3 An acceptance that arrives after the period of validity has lapsed or a reply that includes additions, limitations or conditions is considered to be a counter-offer by the Buyer. A contract comes into being on the basis of a counter-offer if Duuri Oy states that it accepts the counter-offer. 3. Order and confirmation of order 3.1 The Buyer may place an order for products, even in the absence of an offer, either orally (e.g. by telephone) or in writing (including telefax and email). In the order, the Buyer shall specify the person placing the order, the goods ordered, the delivery address, required time of delivery and contact person. 3.2 If Duuri Oy accepts the order as such, Duuri Oy shall give the Buyer a written confirmation of order (including telefax and email) in which it confirms the order. If Duuri Oy does not accept the order as such, they shall inform the Buyer of this. 3.3 If Duuri Oy has not given a written confirmation of order, but delivers the ordered goods in accordance with the order, this is held to be a confirmation of order by the same. 4. Ranking order of validity of contract documents Contract documents supplement each other. If contract documents are mutually contradictory, they shall be observed in the following order of validity, unless otherwise mentioned in the contract: - a written contract including its appendices - confirmation of an order including its appendices - a written order including its appendices - an offer including its appendices - Duuri Oy’s sales and delivery terms - an invitation for tenders 5. Pricing and invoicing 5.1 The prices in Duuri Oy’s price list do not include value added tax. Prices in offers do not include value added tax, unless otherwise stated. Value added tax and any other such taxes or fees shall be added to the stated prices and shall be invoiced in accordance with legislation in force at the time. Prices and other information in price lists are for reference and Duuri Oy reserves the right to make changes. 5.2 Products shall be invoiced at the price valid on the date of delivery, unless otherwise agreed. 5.3 The prices only include Duuri Oy’s standard packaging. Any other packing materials shall be charged for separately. A charge of 10 € / each shall be made for customer pallets. 5.4 Duuri Oy reserves the right to make price adjustments if exchange rates, raw material prices, import charges or other fees, taxes or public fees change after making the offer and before payment by the Buyer. With regard to exchange rates, Duuri Oy is entitled to adjust the price if the exchange rate difference between the date of offer and the date of payment is greater than 2%. Duuri Oy observes the average rate of exchange quoted by the European Central Bank. 6. Transfer of ownership The ownership of a product is transferred to the Buyer when the whole purchase price is paid. However, the Buyer is entitled, in the course of his normal business activity, to sell also such products that have not yet been paid and for which payment is not yet due. Ownership is then transferred to the Buyer’s customer when the product is delivered. 7. Payment of the purchase price 7.1 The purchase price is paid against the invoice in accordance with agreed payment terms. The term of payment is fourteen (14) days net. The purchase price is deemed to have been paid when the payment arrives in Duuri Oy’s account.

7.2 If the Buyer does not pay the purchase price within the agreed time, Duuri Oy is entitled to charge interest on arrears as mentioned in the contract or invoice and may charge reasonable collection charges. Duuri Oy shall charge 16% interest on arrears from the due date onwards. Duuri Oy shall charge an additional invoicing charge of 10 € for sending an invoice for interest on arrears. 7.3 If the Buyer has any receivables from Duuri Oy, the set-off of the receivable against any invoice must be agreed separately with Duuri Oy. 7.4 If the Buyer delays considerably in making payment, Duuri Oy is entitled to cancel the transaction. The Buyer is then obligated to reimburse Duuri Oy in full for the costs incurred in cancelling the transaction and getting the goods back, including any collection charges. 8. The delivery condition of the product 8.1 Duuri Oy shall be responsible for the quality and other characteristics of the products as defined in the agreement so that they are in accordance with information given in writing by Duuri Oy specifically for the transaction in question. 8. 2 The Buyer shall be responsible for the correctness of the detailed information given to Duuri Oy concerning the purpose of use and the measurements of the products ordered. 8.3 The Buyer shall give notice of any delays in delivery or defects in the products within eight (8) days from the date of delivery in order to retain its right to make a claim concerning the defect. If the defect is noticed later, and it was not possible to notice it earlier, the Buyer must give notice of the defect immediately in order to retain its right to make a claim concerning the defect. 9. Terms of delivery 9.1 The delivery place of the products shall be Duuri Oy’s warehouse in Helsinki (Ex Works, Incoterms 2000). When agreed, Duuri Oy shall deliver the products to the Buyer at the Buyer’s expense (FCA, Incoterms 2000). Deliveries in Finland that exceed seven hundred (700) euros in net value excluding value added tax may be delivered freight paid if so agreed (CPT, Incoterms 2000). 9.2 The recipient of the product shall inspect the packages and acknowledge receiving the products in accordance with the delivery note by signing it. Any notices concerning the quantity and condition of the products shall in this connection be recorded in the delivery note which shall also be signed by the carrier. Furthermore, any notices concerning the quantity of products delivered shall be given to Duuri Oy within two (2) working days of receiving the products. 9.3 The instructions given by Duuri Oy concerning transporting and storing shall be observed. 10. Time of delivery and delays 10.1 The normal time of delivery for standard goods in stock is five (5) working days, unless otherwise agreed. 10.2 If the Contracting Parties have agreed on the time of delivery and Duuri Oy is late in delivery, Duuri Oy is obligated to inform the Buyer immediately when it gets to know of the delay. At the same time Duuri Oy shall report the reason for the delay and shall, if possible, give a new estimated time of delivery. 10.3 If a definite date of delivery has been agreed and the delay on the part of one Contracting Party causes essential damage to the other Contracting Party, this Party is entitled to cancel the agreement with regard to the delayed delivery lot after negotiating with the Party causing the delay. 11. Guarantee 11.1 The products may have a valid guarantee possibly granted by their manufacturer. This must always be ascertained for each product. The guarantee period starts from the date of delivery. Duuri Oy is not responsible for guarantees given by other manufacturers, or how they are implemented. 11.2 A guarantee is valid only if the handling, use, maintenance and other corresponding instructions for the product have been observed properly. Furthermore, in order for the guarantee to be valid, it is necessary that the Buyer has fulfilled its obligations arising from the delivery and as defined in the contract. 11.3 If defects in raw materials or manufacturing are found in the product, this must be reported immediately to Duuri Oy during the guarantee period, however, not later than twelve (12) months from the date of delivery.

11.4 Duuri Oy pledges with regard to products that it guarantees, either to repair the defective product or replace it with a new product, at its own discretion and at its own cost. On the part of other products, Duuri Oy is entitled at its own discretion and at its own cost, either to repair the defective product or replace it with a new product. The guarantee on products that have been repaired or replaced is valid up to the end of the guarantee period of the original product. 12. Returns It is necessary that Duuri Oy gives its consent in advance before any returns are made. No credit is given for goods returned without consent. Returns must be implemented within thirty (30) days of delivery of the products. Duuri Oy shall credit 80% of the invoiced price of faultless products that are returned in unopened packages at the Buyer’s cost. No credit is given for products that are tailor-made. The following shall always be reported when returning: - the number and date of the invoice and delivery note, - with whom was the return agreed and when, and - the reason for the return. 13. Limitation of liability 13.1 Duuri Oy is not liable for any damage caused by delayed delivery of products unless the Contracting Parties have specifically agreed on this. 13.2 Duuri Oy shall not be liable for any production losses or for any unrealised profits or for any other indirect damage caused by its products or its activity. 13.3 Duuri Oy shall not be liable for any direct damage to persons, things or property caused by the products unless it can be proved that the damage was caused by a faulty product. In that case the upper limit of Duuri Oy’s liability for damages is the price of the product that caused the damage. 13.4 Duuri Oy shall not be liable for any damage that is caused when products are used for any purposes other than those for which they are specifically intended. 13.5 These terms of limited liability do not, however, limit the liability of Duuri Oy under mandatory legislation for damage caused by the products. 14. Force Majeure A basis for release (force majeure) from the obligations under the contract is deemed to be such an abnormal event that affects the case and prevents the fulfilment of the contract after the contract has been made and which the Contracting Parties had no reason to take into consideration when the contract was made and which is beyond the control of the Contracting Parties and its inhibitory effects cannot be eliminated without unreasonable additional costs or unreasonable loss of time. Such an event may be war, internal unrest, requisition or confiscation by the authorities, import or export ban, natural catastrophe, stoppage of public transport or energy supply, labour dispute, fire or other equally significant and abnormal reason that is beyond the control of the Contracting Parties. 15. Governing law and dispute resolution The agreement between Duuri Oy and the Buyer concerning orders and deliveries of products shall be governed by Finnish laws. Differences of opinion between Duuri Oy and the Buyer concerning orders and deliveries of products shall be solved in the Helsinki District Court as the court of first instance, if the Contracting Parties are unable to reach mutual understanding on their differences through negotiation. Duuri Oy’s sales and delivery terms 1.1.2013


124 PROFILES FOR PUBLIC PREMISES

www.dionepro.fi

FINLAND Duuri Oy

SWEDEN D-Profile AB

NORWAY D-Profile AS

Tapulikaupungintie 35 FI-00750 Helsinki Tel. +358 9 3510 5500 Fax +358 9 3510 5222 E-mail: duuri@duuri.fi

Kabelvägen 10 SE-55302 Jönköping Tel. +46 36 186 363 Fax +46 36 186 366 E-mail: info@d-profile.se

Tollbugata 105 NO-3041 Drammen Tel. +47 9047 06 30 / +47 9306 58 68 E-mail: info@d-profile.no

RUSSIA LLC <<Duuri Profile Russia>>

LATVIA SIA D-profile

143362, Moscow district Aprelevka, Sentrabskaja str., bldg 12 Тel. +7 495 982 3875 Fax +7 495 982 3875 E-mail: duuri@duuri.ru

Rigas iela 6 LV-2114 Olaine Tel. +371 778 3506 Fax +371 778 3508 E-mail: info@d-profile.lv

www.dione.fi | www.dionepro.fi


Pro-catalogue_ENG