Page 1

Spray Monitors & Parts

249

Wilger Spray Monitors provide accurate monitoring of all spray tips or orifices on planters with a quick glance. Modular, flexible and durable. Bodies constructed of tough UV-Resistant Polymethylpentene. Inlet and outlet fittings made of polypropylene and Celcon. FEATURES: • Modular Design with individual columns & Wilger’s innovative o-ring seal & joint clip allows you to quickly assemble “banks” to fit your requirements.

• Buna O-rings are standard (Viton® available); Stainless u-clips. • Each Monitor Column Includes (4) indicator balls (Green, Red, Maroon & Silver).

• Various Inlet & Outlet Sizes in straight & 90 degree hose barb styles. See Adjacent Spray Monitor Pages for Mounting Brackets

Pre-Assembled Spray Monitors: (Can be easily taken apart or added to)

Part No. Columns Inlet Outlet Net Ea. WL 3999-1 4 3/4" HB 90 1/4" FPT 90 $ 62.00 WL 3999-2 4 3/4” HB 90 3/8” Tube Adapter 90 68.00 WL 3999-2HB 4 3/4” HB 90 3/8” HB 90 62.00 WL 3999-8 4 3/4” HB 90 1/2” HB 90 62.00 Single Column “Starters” for Above Monitors : (includes Body, 4 Balls, SS Clips & Inlet, End Cap & Outlet. Note: Use with “Isolation” Tee for Squeeze Pump Monitors).

D

D

WL 3999-2 Spray Monitor

Part No. Inlet WL 3999-1414 1/4" FPT 90 WL 3999-3838 3/8” HB 90 WL 3999-1212 1/2” HB 90 WL 3999-3414 3/4” HB 90 WL 3999-3438 3/4” HB 90 WL 3999-3412 3/4” HB 90

WL 3999-3412 Spray Monitor “Starter”

Outlet 1/4" FPT 90 3/8” HB 90 1/2” HB 90 1/4” FPT 90 3/8” HB 90 1/2” HB 90

Net Ea. $ 18.10 18.10 18.10 18.40 18.10 18.10

Single Column “Adders” for Above Monitors:

LESS 10% On 6+ or LESS 12% On 24+ of One Size

(includes Body, 4 Balls, SS Clips & No End Cap)

Part No. Inlet WL 3999-0014 - WL 3999-0038 - WL 3999-0012 -

WL 3376-4 “Squeeze Pump” Monitor

Net Ea. $ 14.80 14.70 14.50

*Pre-Assembled “Squeeze” Pump Monitors for Squeeze Pumps: Part No. Columns Inlet Outlet Net Ea. WL 3376-6 2 3/8" HB 90 3/8" HB 90 $ 27.00 WL 3376-4 4 3/8” HB 90 3/8” HB 90 53.50 WL 3376-7 2 1/2” HB 90 1/2” HB 90 26.75 WL 3376-5 4 1/2” HB 90 1/2” HB 90 55.00 Also use with Ground Drive Pumps.

D

D

Outlet 1/4" FPT 90 3/8” HB 90 1/2” HB 90

WL 3999-0038 Spray Monitor “Adder”

Non-Assembled Squeeze Pump Components • “Bank Your Own” • Very Compact • Isolation Tees Not Required WL 20480

WL 40436-B5

Spray Monitor

Jet Cap x Tube Adapter

D

D

D

D

WL 20512

WL 20519

WL 20523

WL 20525

Elbow

1/4” FPT Fitting

Isolation Tee (Blank Tee)

1” FPT Clip Tee

Spare Parts Part No. WL 20521 End Cap with SS Clip ............................. WL 20523 “Isolation” Tee with 3/8” FPT Outlet......... WL 20525 1” FPT Clip Tee with 1/4” Gauge Port...... WL 20535 End Cap with 1/4” FPT Port.................... WL 20536 End Cap with 3/8” FPT Port.................... WL 20537 End Cap with 1/2” FPT Port.................... WL 20519 1/4” FPT Outlet Fitting............................. WL 20518 1/4” FPT Elbow....................................... WL 20511 3/8” HB Elbow......................................... WL 20512 1/2” HB Elbow......................................... WL 20513 3/4” HB Elbow......................................... WL 20501 3/8” Hose Barb, Straight.......................... WL 20502 1/2” Hose Barb, Straight.......................... WL 20503 3/4” Hose Barb, Straight.......................... WL 20460-01 Body Only, Spray Monitor....................... WL 20480-01 Body Only, Squeeze Pump Monitor........ WL 20460-V Viton® O-Ring......................................... WL 20460-03 Buna O-Ring........................................... WL 20460-04 SS U-Clip................................................

D

Part No. Net Ea. WL 20480 Bottom Feed “Squeeze” Pump Monitor, 1Column with 4 Balls & U-Clip . $ 10.40 Bottom Inlet Combo-Jet Cap Options: (1 Required per Column Above; Installs with 90° Twist; Buna O-ring & inline Diffuser Included): Part No. Net Ea. WL 40422-B5 Combo-Jet Cap with Integral 1/4” Hose Barb, Straight .......... $ 1.60 WL 40424-B5 Combo-Jet Cap with Integral 3/8” Hose Barb, Straight........... 1.60 WL 40426-B5 Combo-Jet Cap with Integral 1/2” Hose Barb, Straight........... 1.60 WL 40435-B5 Combo-Jet Cap with Integral 1/4” Tube Adapter (Push-In Style) 2.90 WL 40436-B5 Combo-Jet Cap with Integral 3/8” Tube Adaper (Push-In Style) 2.90 WL 40273-B5 Combo-Jet Cap with Integral 1/4” FPT.................................... 1.60 Top Outlet Fitting Options: (Install with SS U-Clip on Monitor, Buna O-Ring Included): Part No. Net Ea. WL 20516 1/4” Tube Adapter (Push In, 90° Elbow) ...................................... $ 3.40 WL 20528 5/16” Tube Adapter (Push In, 90° Elbow) .................................... 3.70 WL 20517 3/8” Tube Adapter (Push In, 90° Elbow)....................................... 3.80 WL 20511 3/8” Hose Barb, 90° Elbow........................................................... 2.00

Net Ea. $ 2.30 4.30 5.10 2.90 2.90 2.90 2.00 2.00 2.00 2.00 2.00 2.00 2.00 2.00 9.30 7.40 1.30 .20 1.00

Viton® is a registered trademark of DuPont Performance Elastomers

DULTMEIER SALES • OMAHA, NE

(800) 228-9666

www.dultmeier.com

• DAVENPORT, IA

(800) 553-6975

E0850


Visual Flow Spray Monitors

250

VisaGage II Visual Flow Spray Monitors CDS-John Blue’s VisaGage II will let you know immediately if an outlet is plugged, thus showing possible variations in you applications rates. FEATURES: • Manufactured with chemical resistant polypropylene adapters and light blue, clear PVC body with an additive for UV protection. • Get the exact number of flow monitors for spraying or fertilizer applications by simply banking together single columns, SMSS1 (spraying) or SMFD1 (fertilizer applications with squeeze or ground drive pumps). • The set of 4 flow monitor assemblies (SMSS4 or SMFD4) can also be connected for additional columns divisible by four. Snap them together with the stainless steel clips and o-rings and go. • Units with (-FUM) are designed specifically for fumigants, including telone. Constructed of polysulfone chemical-resistant bodies with UV protection; Viton® seals. Light in color. See Adjacent Spray Monitor Pages for Mounting Brackets • Standard with Viton® O-Rings.

D

D D D

BU SMSS1 Single Flow Spray Monitor

BU SMSS4 Set of Four Spray Monitor Assembly

BU SMFD4 Set of Four Monitor Assembly for Squeeze Pumps

BU SMFD1 Single Flow Monitor for Squeeze Pumps

BU SMPT-0009 Ball Storage Unit (Clips on)

D

D

BU SMSS1-FUM Single Flow Monitor for Fumigants

D D

BU SMPT-0014 Tee Spray Monitors Part No.

D

BU SMPT-0049 Flanged Tee

BU SMPT-0021 Stainless Steel Ball

BU SMPT-0053 Tube Adapter

Description

BU SMSS1 Single Flow Spray Monitor Assembly: Includes single body, 3/8” NPT female inlet & outlet...... BU SMSS4 Set of 4 Flow Monitor Assembly: Includes (4) bodies, 1/2” NPT female inlet, 3/8” female outlet. BU SMSS4-PE14 Set of 4 Flow Monitor Assembly: Includes (4) bodies, 1/2” NPT female inlet, 1/4” x 90° Tube Fitting outlet.. BU SMSS4-PE38 Set of 4 Flow Monitor Assembly: Includes (4) bodies, 1/2” NPT female inlet, 3/8” x 90° Tube Fitting outlet.. BU SMSS1-FUM Single Flow Spray Monitor Assembly for Fumigants................................................................ BU SMSS4-FUM Set of 4 Flow Monitor Assembly for Fumigants......................................................................... Monitors for use with Squeeze & Ground Drive Pumps Part No. Description

BU SMFD1 Single Flow Squeeze Monitor Assembly - Flow Divider Type: Includes single flow divider...... BU SMFD4 Set of 4 Flow Monitor Assembly - Flow Divider Type: Includes (4) bodies................................ BU SMFD4-PE14 Set of 4 Flow Monitor Assembly - Flow Divider Type: Includes (4) bodies; 1/4” x 90° Tube Fitting Outlet... BU SMFD4-PE38 Set of 4 Flow Monitor Assembly - Flow Divider Type: Includes (4) bodies; 3/8” x 90° Tube Fitting Outlet... BU SMFD1-FUM Single Flow Squeeze Pump Monitor for Fumigants.................................................................. BU SMFD4-FUM Set of 4 Flow Monitor Assembly - Flow Divider Type for Fumigants....................................... Accessories Part No.

BU SMPT-0053 BU SMPT-0052 BU SMPT-0051 BU SMPT-0009 BU SMPT-0014 BU SMPT-0049 BU SMPT-0021 BU SMPT-0007 BU SMPT-0034

Description

90 Degree 3/8” Tube Adapter ....................................................................................................... 90 Degree 5/16” Tube Adapter ..................................................................................................... 90 Degree 1/4” Tube Adapter ....................................................................................................... Ball Storage Unit: Holds up to 40 balls. Lid can be locked........................................................... Tee: For spray type use with typically (8) total bodies, includes gauge port.................................. Flanged Tee: For spray type use with typically (8) total bodies, includes gauge port................... 7/16” Stainless Steel Ball: For use with extra high flow rates....................................................... #212 Viton® O-Ring: Used with top and bottom Adapters............................................................ #112 Viton® O-Ring: Used to seal orifice plates..........................................................................

D

Net Ea.

$ 18.10 54.05 77.45 78.00 21.80 70.95

$ 16.45 57.10 82.40 83.20 18.85 71.40

LESS 10% On 6 or 12% On 24 Of One Size

$ 5.27 5.08 4.89 6.67 6.19 7.29 1.89 2.07 1.05

Viton® is a registered trademark of DuPont Performance Elastomers

DULTMEIER SALES • OMAHA, NE

(800) 228-9666

www.dultmeier.com

• DAVENPORT, IA

(800) 553-6975

E0882


Metering Orifices

251

Metering Orifices

Meter Your Flow with Wilger Orifices Metering Orifices Provide a Simple, Leak-Free Solution that Eliminates the Need for Additional Components. • Orifice is Placed into Flow Indicator Outlet Fitting for Easy Access • Ribs On Bottom of Metering Orifice Prevent Ball from Restricting Flow, Eliminating Need for Ball Retainer

Metering Orifice

• Orifices Available to Meter Flows Ranging from 0.004 to 8.0 GPM

To select a Metering Orifice from the chart below, follow these steps: Step 1: Calculate the Flow Rate Required Per Flow Indicator with the following formula: Flow Rate = Application Rate (US gal/acre) x Speed (mph) x Outlet Spacing (inches) x # of Outlets per Flow Indicator x Conversion Factor * ÷ 5940

D

* The Metering Orifice Selection Chart is based on water. Fertilizer is heavier than water, so a larger orifice is required for a given flow rate of fertilizer, compared to water. To determine the conversion factor for a given fertilizer, obtain the weight for one US gallon or the specific gravity of the fertilizer and select the applicable conversion factor below.

Step 2: Select a Metering Orifice and operating pressure. On the chart below, locate the flow rates closest to your requirement. Select a Metering Orifice with a flowrate at an operating pressure in the middle of its range (i.e. at 15 - 20 PSI).

Metering Orifices

Part No. Description Net Ea. WL 21009-00 thru 21250-00 * Metering Orifice with Buna........... $ 2.70 WL 21009-V0 thru 21250-V0 * Metering Orifice with Viton®........ 3.50 * The (3) numbers following 21 are the orifice size in 0.000”; Suffix (-00) for Buna, (-V0) for Viton®. — Less 10% on 50 of One Size — Viton® is a registered trademark of DuPont Performance Elastomers

DULTMEIER SALES • OMAHA, NE

(800) 228-9666

www.dultmeier.com

• DAVENPORT, IA

(800) 553-6975

E1049


Redball Spray Monitors & Parts

252

Spray Monitors for Squeeze Pumps

Spray Monitor Accurately monitor the flow rate on your liquid fertilizer and chemical application equipment.

These Red Ball Monitors are Specifically Designed to be Used with Squeeze Pumps

Plugged Nozzle

Pressure Gauge

PUMP

No. 3376-2 One Piece Body

VALVE

The RED BALL Spray Monitor is a simple gauge that allows you to visually monitor proper flow rate of your liquid fertilizer and herbicide applications. It shows immediately if a nozzle becomes plugged as little as 10% and it tells you, at a glance, any variation in your application rate. Standard with 3/8” 90° discharge elbows. One piece bolded bodies. Features: Rugged, reliable design • Easy to use and install • Detection of plugged nozzles and worn or damaged tips • Detection of leaks in hoses and connections • Increase yields by proper application. Part No. HY 3376-2

Features: Rugged, reliable design • Easy to use and install • Detection of plugged nozzles and worn or damaged tips • Detection of leaks in hoses and connections • Increase yields by proper application.

D

D

Part No. HY 3999-1414 HY 3999-1212 HY 3376-4 HY 3376-5 HY 3376-6 HY 3376-7

Description Net Ea. 1/4” 1-Column for Squeeze Pumps......... $ 24.00 1/2” 1-Column for Squeeze Pumps......... 24.00 3/8" 4-Column for Squeeze Pumps......... 65.50 1/2" 4-Column for Squeeze Pumps......... 65.50 3/8" 2-Column for Squeeze Pumps......... 42.85 1/2" 2-Column for Squeeze Pumps......... 41.70

Single Column Spray Monitor Parts

Description Net Ea. 3/8" 4 Row Monitor/Sprayer........................ $ 61.60

Ref.# Part No. Description

Spray Monitor Replacement Parts List

D

1 MZ 2133 MZ 2134 MZ 2135 1A MZ 20519 2 MZ 2140 3 MZ 2137 5 MZ 2037 6 MZ 2139 7 MZ 2138 8 MZ 2136 9 WL 20525

Part No.

1 MZ B35M 2 TW C3800-90 2 TW C1200-90 3 MZ 31W 3 MZ 31V 4 MZ RB20 4 MZ RB21 4 MZ RB22 4 MZ RB23 4 MZ RB24 4 MZ RB25 5 HY 100-3376 6 MZ RB26 7 TW N35 – HY 3430-274 – MZ RB27 – MZ RB28

Description

Net Ea.

3/4" FPT Poly Nut.................. 3/8" Nylon Elbow with Tips..... 1/2" Nylon Elbow with Tips..... EPDM Gasket / Standard...... Viton® Gasket........................ Set of 4 Red Balls / Glass...... Set of 4 Red Balls / Plastic.... Set of 4 Black Balls / Plastic.. Set of 4 Green Balls / Plastic. Set of 4 White Balls / Plastic.. Set of 4 Stainless Balls.......... 4-Column Replacement Body 3/4" Blank Disc....................... 3/4" FPT Blank Cap............... Red Ball Repair Kit (16 Balls, 4 Gaskets, 2 Blank Discs)...... Orifice Cap - Before 1995...... Retaining Ring - Before 1995.

$ 2.30 2.05 2.63 .71 2.08 5.70 4.55 4.55 4.55 4.55 6.82 35.80 .73 .69

Float Stop U-Pin Column, Single Cap, Plug 3/4" Elbow H.B., Inlet Clip Tee

2 1A

Ref. No.

Net Ea.

1/4" Elbow Hose Barb $ 2.56 3/8" Elbow Hose Barb 1.77 1/2' Elbow Hose Barb 1.77 1/4" FPT Outlet Fitting for 3999 Series 4.24 O-Ring EPDM .61

4

.91 2.41 13.80 1.77 1.77 5.10

1 3 5

9

6

7

8

Spray Monitor Mounting Brackets Use these mounting brackets to support your spray monitors above your planter/sprayer bar at easy viewing height. Constructed of laser cut steel with slotted holes for a variety of mounting heights; black powder coat finish. Small brackets hold up to 8 spray monitors; large brackets hold up to 16. Optional back plates are white and improve visibility at dawn, dusk and night time operation. Mounting u-bolts are not included.

12.20 .40 .40

D

Part No. DS 50-4 DS 50-2 DS 50-3 DS 50-5

Viton® is a registered trademark of DuPont Performance Elastomers

DULTMEIER SALES • OMAHA, NE

(800) 228-9666

www.dultmeier.com

Description Net Ea. Small Mounting Bracket for 8 Monitors.......... $ 75.75 Small White Back Plate................................. 25.25 Large Mounting Bracket of 16 Monitors........ 95.95 Large White Back Plate................................. 32.35

• DAVENPORT, IA

(800) 553-6975

E0374


NH3 & VisaGage Accessories • Fertilizer System

253

Totally Tubular Fertilizer Placement System Totally Tubular Systems provide for precise placement of starter fertilizer approximately 1/4” below the seed bed to optimize starter fertilizer root uptake and effectiveness (Use Model T300 tubes to apply liquid nitrogen fertilizer solution beside the seed trench behind the closing wheels). These durable 3/8” stainless tubes are custom manufactured to fit the planter models noted below and include all stainless mounting hardware (No welding required).Independent test showed a 5% yield increase on corn, compared to traditional starter fertilizer placement systems. Designed to fit John Guest 3/8” tube fittings. The optional seed bounce flap closes the opening between the disc openers, assuring correct seed placement by eliminating bounce and ricochet. Recommended: Replace disc openers when you install tubes. Check valves should also be utilized with these fertilizer tubes, close to the tube. (See our diaphragm check valves).

TT 300

TT 006 Shown Installed

JOHN DEERE Part No.

TT 006 TT 009 TT 007 TT 002 TT 001 TT SBL TT SBR

TT SEEDTOOL Seed Depth Tool

Description Net Ea.

1700 Series with XP Row Units.......................... $ 55.55 John Deere ExactEmerge Planter........................ 55.55 1700 Series MaxEmerge 5.................................. 55.55 1700,7300,7200 Series (Non XP) Units.............. 55.55 7000,7100 Series Planter.................................... 55.55 1700 Series with XP Row Units Soybean, Left Side...... 55.55 1700 Series with XP Row Units Soybean, Right Side... 55.55

CASE Part No.

Description Net Ea.

Part No.

Description Net Ea.

TT 100 2011 Case Planters & Older......................... $ 25.80 TT 10012 2012 Case Planters & Newer....................... 28.30 TT 125 All Case Planters-Below Seed Option........... 27.80 MONOSEM

KINZE Part No.

Description Net Ea.

TT 401 TT 301

4000 Series Planter..................................... $ 55.55 3000 Series Planter..................................... 42.45

Part No.

Description Net Ea.

TT 700 TT 700V

Monosem Fert. Tube w/attached Std. Point. $ 40.00 Monosem Fert. Tube w/attached V-Slice Pt.. 60.10

Part No.

Description Net Ea.

NITROGEN TUBE SYSTEMS

WHITE TT 260 TT 200 TT 290

6000 Series Planters.................................... $ 58.10 8000 Series Planters.................................... 58.10 9000 Series Planters.................................... 58.10

Part No.

TT 400

Nitrogen/Liquid Fert. Placement Tube........... $ 42.45 Nitrogen/Liquid Fert. Placement Tube for CASE IH. 33.85

Part No.

Description Net Ea.

Optional Items

GREAT PLAINS Description Net Ea. Starter Fertilizer Placement Tube................. $ 69.70

TT 008

TT 300 TT 300-CASE

Seed Bounce Flap

TT 008 Seed Bounce Flaps...................................... $ 8.03 TT SEEDTOOL SS Seed Depth Tool, Measure Up to 5”....... 10.10

NH3 VisaGage II with Liquid Blockage Monitor System

VisaGage Orifice Selectors Turn Your VisaGage II Into A Self-Contained Orifice Changing System FEATURES: • Turn your VisaGage II into a self-contained orifice changing system. • This patent-pending system is the first of its kind on the market today! • Simply select from one of four orifice settings on each disc. (2) Discs provided for (8) different options. (Orifice diameters: 0.031,0.0148, 0.069, 0.099, 0.107, 0.125, 0.142, and 0.150). • You won’t get wet from fertilizers or chemicals when changing orifices. • Adjustment is quicker, no need to travel to each row unit and work with plumbing near the ground. Part No.

VisaGage Orifice Selectors

Net Ea.

FEATURES: • Now you can monitor your NH3 Flow from the tractor cab. • System shows both low & no-flow. Premium system shows high flow. • Correct problems immediately or pause to capture the row for investigation later. • Compatible with N-Serve. • Lightweight polished aluminum manifold with PGP translucent flow monitors.

BU SMPT-OSA1 Single VG II Orifice Selector Kit................... $ 19.00 BU SMPT-OSA4 Set of 4 VG II Orifice Selector Kit................. 68.00

• Must be used with BU BMI-08 or BU BM-08PL Control Systems (see adjacent page). Part No.

VisaGage II With LBMS

Net Ea.

BU SMFD2-NH3 Flow Monitor Assembly NH3, Set of 2......... $ 78.30 BU SMFD4-NH3 Flow Monitor Assembly NH3, Set of 4......... 128.30 DULTMEIER SALES • OMAHA, NE

(800) 228-9666

www.dultmeier.com

• DAVENPORT, IA

(800) 553-6975

E1088


Planter Fertilizer Kits

254

Planter Fertilizer Kits Quick, Easy & Accurate Plumbing Kits for Applying Starter Fertilizer As You Plant! These Kits Include the Following Items Below:

* 1/2” Hose

HY 3350-44P: 3/4” Strainer, 50 Mesh

from Strainer to Pump (not included)

12V Diaphragm 5 GPM Pump:

WL 3999-1 & WL3999-0014 Spray Monitor Columns

* 1/2” Hose from

Pump to Flow Monitor (not included)

(6) WL 20517: 3/8” Tube x 90˚ Elbows

* 1/2” Hose

from Tank to Strainer (not included)

D

TK PHB1212: 1/2” Hose Barb

TK PHB3412: 3/4” Hose Barb x 1/2” MNPT Fitting

DU PLANT6 Package also includes: 100’ of 3/8” Black Tubing for 6 & 8 Row. 200’ of 3/8” Black Tubing for 12 Row.

Wire Harness

6 Row Planter Fertilizer Kit (DU PLANT6) shown

TK PHB1212: 1/2” Hose Barb

WL 20525: Clip Tee with Gauge Port

D

TK 901-1X1/2: Reducer Bushing TK PHB1212: 1/2” Hose Barb

Also See Totally Tubular Products on Adjacent Pages

Pump Speed Controller: Wire to Pump. Also run 3/8” Tubing from Controller to Flow Monitor for Pressure Reading (wire harness & tubing included).

(6) 3/8” Tubing from Flow Monitor to Each of the (6) Nozzle Bodies

SS QJ98590-3/8-2: John Guest Style Nozzle Bodies

* NOTE: 1/2” hose & orifice discs not included in kit.

SS QJ98586-NYR: John Guest Style Caps

Cable Ties

Planter Fertilizer Kits

Part No. DU PLANT6 DU PLANT8 DU PLANT12

Teflon Tape

Description Net Ea. 6 Row Planter Fertilizer Kit..... $ 685.00 8 Row Planter Fertilizer Kit..... 742.00 12 Row Planter Fertilizer Kit... 869.00

Planter Fertilizer Kits

BU FD0610 Flow Divider & (6) LM MC3814 (1/4” MPT x 3/8” Tube Fittings)

* Orifice discs not included, sold separately. Sized per application.

(1) WL 3376-4 & (2) WL 20480 Spray Monitor Columns

(6) WL 20517: 3/8” Tube x 90˚ Elbows

SS 18999EPR: Gaskets Included

DU PLANT6G Package also includes:

(6) 3/8” Tubing Runs 3/4” Hose from Pump to Flow Divider (6’ Included & Hose Barbs, Clamps)

Poly Reducing Bushings into Pump Discharge Port

D

200’ of 3/8” Black Tubing

Ground Drive Pump (1-1/2” Ports: Pump not Included in Kit) 1-1/2” Hose from Tank to Strainer (8’ Included & 90˚ Hose Barb, Clamps)

(6) WL 40436-B5: 3/8” Tube Adaptor 1-1/2” Hose from Strainer to Pump (6’ Included & 90˚ Hose Barb, Clamps) HY 3350-116P: 1-1/2” Strainer, 50 Mesh

D

Also See Totally Tubular Products on Adjacent Pages

Cable Ties (100 Qty.)

D

* NOTE: 1/2” hose & orifice discs not included in kit.

6 Row Planter Fertilizer Kit for Ground Drive Pumps (DU PLANT6G) shown

(6) 3/8” Tubing from Flow Monitor to Each of the (6) Nozzle Bodies

Teflon Tape (1 Roll)

(6) SS QJ98590-3/8-2: Nozzle Bodies

(6) SS QJ98586-NYR: Caps

Planter Fertilizer Kits for Ground Drive Pumps

TK PHB112: 1-1/2” Hose Barb x 1-1/2” MNPT Fitting

Part No. DU PLANT6G DU PLANT8G DU PLANT12G

DULTMEIER SALES • OMAHA, NE

Description Net Ea. 6 Row Planter Fertilizer Kit..... $ 722.00 8 Row Planter Fertilizer Kit..... 922.00 12 Row Planter Fertilizer Kit... 1039.00

(800) 228-9666

www.dultmeier.com

Note: Do not use orifice discs if included Flow Divider is used.

• DAVENPORT, IA

(800) 553-6975

(6) SS 18999EPR (Only needed with orifice discs)

E0970


Liquid Blockage Monitor System

255

Liquid Blockage Monitor System Now You Can Know Your Liquid Application Flow from the Cab of Your Tractor! Now you can know your liquid application flow from the cab of your tractor. Identify which row is being under applied before your yields are diminished, saving valuable time and money. This system shows you both low-flow and no-flow problems now, which means you can correct it immediately. No more second guessing if any of your delivery lines are plugged! Note: Can also be used for NH3 with BU SMFD4-NH3 VisaGauge Flow Monitor.

D

Premium System (Wireless) i-Pad® Based

Features of the CDS-John Blue Liquid Blockage Monitor System: • Uses magnetic sensing technology mounted behind the VisaGage II Flow Monitors. • Sensors can be mounted to existing VisaGage II’s, new magnetic balls are supplied with sensors. • Identifies where magnetic balls are floating in each row during liquid application.

Standard Control Panel (Wired)

• Only LBMS shows both no-flow and low-flow. Plus the premium i-Pad® based systems displays high flow, indicating broken tubing or fittings. • See a visual display and hear an audible alarm on the control panel from your tractor cab. • Each row with a problem will be highlighted by a flashing LED light at the row. No need to remember or search for which row is blocked after you come to a stop.

D

• Can be used with cloudy or dark liquids - LED is visible to the column sides. • The alarm will reset automatically when the blockage has been corrected. • Includes the ability to “Pause” the system to capture problem rows for investigation later when you are able to stop. • LBMS i-Pad® and other tablet apps are free.

Flow Monitors Not Included - See Other Pages

Sensor Assembly 4 Rows

D

VisaGage II

Order (1) Main Kit (8 Rows) Plus 4 Row Expansion Kits to Cover All Your Rows (extra rows or expansion kits are fine) Premium WIRELESS System (iPad 2 or Newer Display Running IOS 6 or Higher) * Part No.

Description

BU BMI-08 Premium 8 Row Kit Includes: iPad Ram Mounting Bracket, Power Harness, 28 ft. Extension Harness, Wireless Sensor Kit, Standard Sensor Kit and (2) Terminator Plugs.................................................................... BU BM-08ISO Premium 8 Row Wireless Kit: ISOBUS.............................................................................................................. BU BM-08ISO-JD Premium 8 Row Wireless Kit: ISOBUS for John Deere.....................................................................................

Net Ea.

$ 920.00 908.00 1690.00

Standard WIRED System * Part No.

BU BM-08PL

Description

Standard Wired 8 Row Kit Includes: Control Panel with Mount Bracket, Input Harness, 28 ft. Extension Harness, Tee Harness, (2) Standard Sensor Kits, (2) Terminator Plugs and (2) 15 ft. Extension Harnesses...................... $ 908.00

4-Row Expansion Kit Part No.

BU BMPT-001

Spare Parts Part No.

BU BMPT-002 BU BMPT-013 BU BMPT-015

Description

4 Row Sensor Expansion Kit for adding to BMi-08, BM-08AP and BMPT-08PL: Includes Standard Sensor, Tee Harness, Magnet Balls and Hardware............................................................................... Description

Standard Sensor (Replacement).......................................................................................................................... 15 ft. Harness, Extension Cable........................................................................................................................... Terminator Receptical (Replacement)..................................................................................................................

$ 318.20 $ 308.60 64.95 12.30

* VisaGage II Flow Monitors are ordered separately.

DULTMEIER SALES • OMAHA, NE

(800) 228-9666

www.dultmeier.com

• DAVENPORT, IA

(800) 553-6975

E1051


SafeGuard™ Monitors

256

SafeGuard™ Blockage Monitors SafeGuard™ electronically detects blockages and alerts you with an Audible Alarm and a Visual Display of the blocked row’s number. SafeGuard™ reduces over and under-application, saves money and applies liquid fertilizer with confidence without having to watch flow monitors or outlets.

FEATURES: • Instantly detects and alerts the operator of blockages without seeing the sensor - saves neck and back strain and eliminates the need for cameras. • Audible alarm immediately alerts operator of blockage. • Visual display immediately alerts operator of blockage. • Monitors all runs continuously. • Alerts operator regardless of lighting conditions. • Same performance Day or Night, Rain or Shine. • System is not affected by cloudy or dark liquids. • Achieve full benefits of liquid fertilizer application knowing all rows are applying. • Blockage notification for a wide variety of product applications, starter fertilizers, herbicides, insecticides, fungicides, fumigants, etc. Standard Outlet Fitting

SafeGuard™ Console Compact in-cab display that monitors, identifies and reacts with lightning speed to immediately alert you to a blockage. Easy-touse, on/off and volume adjustments are the only user controls. No calibration is required. After installation, simply turn on the console and it will detect how many rows are being monitored and their location (also checks for loose wires). SafeGuard™ brings real time blockage monitoring into the cab.

D

Also available with ISOBUS Option to display on an existing VT (Virtual Terminal) instead of standard console.

Traditional Ganged Sensor Installation

Extension Cable (not included)

Polyethylene Cartridge & Chamber Window Standard Viton O-Ring & Stainless U-Clip Connectivity

Installation Flexibility & Savings Opportunities No limitations in mounting configurations. Mount the sensors to suit your needs since the rows are being monitored without the need to see them. Gang sensors together or mount them individually over the row.

D

Note: Sensor Inlet & Outlet Fitting Must Be Ordered Separately

Over the Row Installation

SafeGuard Console

SafeGuard Console

Console to Hitch Cable (in kit))

Console to Hitch Cable (in kit) Adapter Cable (in kit)

Durable Case Material

Note: (1) Extension Cable needed from hitch to outside sensor (not included)

SafeGuard Sensors (paired option)

SafeGuard Sensors (ganged together)

Adapter Cable (in kit)

SafeGuard Sensors

Each SafeGuard™ Blockage Monitor Kit includes console with mounting hardware, 10’ power cable, 15’ console to hitch cable, 5’ hitch to first sensor cable, the number of blockage sensors indicated and reference manual. Sensors are daisy chained together with wire leads. Implement Whisker Kit allows for raising planter or bar at end of row without tripping SafeGuard™ Monitor (puts monitor in hold temporarily).

Traditional Gang Mounted Kits (3” Wire Leads)

Over The Row Kits (20” Wire Leads)

Part No. MT 1837-08S MT 1837-12S MT 1837-16S MT 1837-24S MT 1837-36S MT 1837-48S MT 18498

Part No. MT 1837-08L MT 1837-12L MT 1837-16L MT 1837-24L MT 1837-36L MT 1837-48L MT 01840 MT 18502

Description SafeGuard™ Liquid Blockage Kit with 8 Sensors (3” Leads)..... SafeGuard™ Liquid Blockage Kit with 12 Sensors (3” Leads).. SafeGuard™ Liquid Blockage Kit with 16 Sensors (3” Leads).. SafeGuard™ Liquid Blockage Kit with 24 Sensors (3” Leads).. SafeGuard™ Liquid Blockage Kit with 36 Sensors (3” Leads).. SafeGuard™ Liquid Blockage Kit with 48 Sensors (3” Leads).. 10’ Extension Cable.....................................................................

Call for Pricing

Description SafeGuard™ Liquid Blockage Kit with 8 Sensors (20” Leads)..... SafeGuard™ Liquid Blockage Kit with 12 Sensors (20” Leads)... SafeGuard™ Liquid Blockage Kit with 16 Sensors (20” Leads)... SafeGuard™ Liquid Blockage Kit with 24 Sensors (20” Leads)... SafeGuard™ Liquid Blockage Kit with 36 Sensors (20” Leads)... SafeGuard™ Liquid Blockage Kit with 48 Sensors (20” Leads)... SafeGuard™ Implement Whisker Switch Kit 30’ Extension Cable........................................................................

DULTMEIER SALES • OMAHA, NE

(800) 228-9666

www.dultmeier.com

• DAVENPORT, IA

(800) 553-6975

DULTMEIER SALES • OMAHA, NE

(800) 228-9666

www.dultmeier.com

• DAVENPORT, IA

(800) 553-6975

Call for Pricing

E1014


Nozzle Accessories Hi-Flow Turret Nozzle Bodies

Diaphragm Check Nozzle Bodies

for Wet or Dry Booms

Features: • Nylon Body • Available in 1/2" & 3/4" • Standard anti-drip valve (Red 8 PSI). • Optional anti-drip valve (4, 12 or 25 PSI). • EPDM diaphragm. • Maximum Temperature is 125° F. • Can be used with all quick-attach spray caps

Standard Equipment on Many Commercial Sprayers Features: • Three turret styles for an easy change of spray tips, single, 3-way & 5-way. • Available for 3/4” & 1” Wet or Dry Booms. • Positive shutoff between each spray position. • Unique DCV (diaphragm check valve) design reduces restrictions in the flow path, enabling 2.6 GPM with a 5 PSI pressure drop through the nozzle.

D

Part No. TW 413412 TW 413413 TW 413422 TW 413423

• Can be used with all Quick Attach spray tips. Caps, Gaskets & tips not included. • Supports faster field speeds with the same coverage & supports direct fertilizer application through the nozzle body DCV flow path.

D

Description Net Ea. 1/2" Single HB Check Valve................. $ 4.34 3/4" Single HB Check Valve................. 4.34 1/2" Double HB Check Valve............... 4.34 3/4" Double HB Check Valve............... 4.34 Less 5% on Std. Pkg. of 50

Hypro twin cap adapter, 152607TC, and TeeJet QJ90-2NYR “Y” adapter are made expressly for use with fungicide application for soybean rust.

D

Part No. Net Ea. TW 9950-0014 3 Nozzle Turret for 3/4" Boom / EPDM......... $ 9.39 TW 9950-0015 3 Nozzle Turret for 1" Boom / EPDM............ 9.39 TW 9950-0016 5 Nozzle Turret for 3/4" Boom / EPDM......... 9.39 TW 9950-0017 5 Nozzle Turret for 1" Boom / EPDM............ 9.39 TW 9950-0018 5 Nozzle Turret for 1” Boom / Viton®............ 10.50

D D

QJ90-2NYR

The TeeJet “Y” adapter can be used with TJ60 TwinJets, XR TeeJets and TT Turbo TeeJets. The Hypro adapter can be used with ULD, TR, VP and TeeJet TT and XR. The Hypro cap will mate to the TeeJet QuickJet but will not accommodate the TJ60 a. Supplied less tips. Part No. Description Net Ea. TW 152607TC Hypro Twin Cap with gasket, less tips......... $ 3.42 SS QJ90-2NYR “Y” Adapter with center gasket, less caps... 2.69

Dry Boom Adapters For dry booms use the 3/4" size and add 3/4" or 1" single or double hose connectors.

Nyglas Nozzle Adapters

D

Description Net Ea. 3/4" Single Hose Connector...................... $ 1.02 3/4" Double Hose Connector.................... 1.02

D

PART A

Adapters available in 1/4", 3/8", 1/2" & 3/4" FPT

PART B

Couplers have 1/2" or 3/4" MPT

Description Net Ea. EPDM Diaphragm................................... $ .52 Viton® Diaphragm.................................. 1.61 EPDM Seal, 4 PSI Spring, Red/Orange. 2.40 EPDM Seal, 25 PSI Spring, Red/Blue.... 3.21 EPDM Seal, 8 PSI Spring, Red/Black.... 2.44 Retainer Cap Only.................................. 1.39

D

#50013

Poly Elbow

Polypropylene

Broadcast Adapter

Switch-A-Roo Couplings

for Floaters Using High Volume Deflect Style Tips

The 3/4" Fiber-Reinforced NY-GLASS Lever Couplers are ideal for mounting Spraying Systems KSS or Delavan Flooding Nozzles to sprayer booms. Max. Temperature is 140° F.

Part No. “NY-GLASS” Net Ea. FC 025AN 1/4" FPT Adapter ................. $ 3.00 FC 037AN 3/8" FPT Adapter ................. 3.00 TK P050A 1/2" FPT Adapter ................. 3.08 FC 075AN 3/4" FPT Adapter ................. 2.70 FC 050BN 1/2" MPT Coupler ................ 6.70 FC 075BN 3/4" MPT Coupler ................ 6.60 BV 50013 3/4" Adpt x 3/4" FPT Elbow.... 5.30 10% DISCOUNT ON 100 ASSORTED ADAPTERS

Check Valve Replacement Parts Part No. TW 5860-36 TW 5865-36 TW 4020-3 TW 4020-5 TW 5860-130 TW 2000-30

D

Adapter Caps for Double Tip Application 152607TC

• Automatic spray alignment using flat fan spray tips. • ProFlo nozzle bodies come standard with an 8 PSI EPDM check valve (Viton® optional) 4 PSI, 12 PSI, 20 PSI & 25 PSI check valves are available as options.

Part No. TW 426519 TW 427519

257

Cam Lever Coupling P050B or P075B

Existing Spray Nozzle D

- Use with Hypro HF Tips D

9950-0001 Broadcast Adapter

Male Switch-A-Roo Adapter

Broadcast Adapter Piece for floaters using high volume deflect style tips for fertilizer applications. Consists of 3/4” polypropylene adapter with elbow and QJ tip adapter. Sold in packages of 6.

Polypropylene Switch-A-Roo Couplings for quick nozzle changes. The female coupling has a self alignment groove. The male adapter is moulded with self alignment tab. Maximum Temperature is 140° F. Part No. TK P050B TK P075B TK 75A-1/4SA TK 75A-3/8SA TK 75A-1/2SA TK 75A-3/4SA

Hypro HF Tip is Not Included

Part No. TW 9950-0001 QJ Poly Adapter x Part A, Pkg of 6........

Net Ea. $ 46.50

Description 1/2" MPT X Male Coupler with Groove 3/4" MPT X Male Coupler with Groove 1/4" FPT X Male Adapter with Tab...... 3/8" FPT X Male Adapter with Tab...... 1/2" FPT X Male Adapter with Tab...... 3/4" FPT X Male Adapter with Tab.....

Net Ea. $ 7.09 5.91 3.09 2.58 2.58 2.58

Viton® is a registered trademark of DuPont Performance Elastomers

DULTMEIER SALES • OMAHA, NE

(800) 228-9666

www.dultmeier.com

• DAVENPORT, IA

(800) 553-6975

E0611


Nozzle Body Systems

258

“Combo-Rate II” Nozzle Body Systems Combo-Rate II Nozzle Body Systems are designed with the main saddle/nozzle body positioned directly under the boom. This keeps the complete assembly compact, even when the second nozzle body or turret is added. Constructed of glass-filled polypropylene for strength and excellent corrosion-resistance. All components are easily connected with the stainless u-clips. Standard with buna o-rings (Viton® available; enter -V0 suffix instead of -00) and EPDM internal diaphragm. Standard with 10 PSI diaphragm check valves. Fits 1” I.D. standard boom pipes.

WL 20460-04 U-Clip

D

D

WL 41100-02 Body Nut D

D

WL 41434-00 Combo Rate II Saddle/Body 2 Way, 3/8” Inlet. Includes Manual Shutoff Valve (MSO)

WL 41285-00 Male Plug

WL 41515-00 5-Way Turret Part No.

WL 41333-00 WL 41434-00 WL 41438-00 WL 41364-00 WL 41513-00 WL 41514-00 WL 41515-00 WL 41502-11 WL 40203-00 WL 41285-00 WL 20460-04 WL 41100-03 WL 41100-V3 WL 41100-12 WL 41100-11 WL 41100-02 WL 40155-07 WL 40155-12

Shown here completely assembled with 5-Way Turret & Plug

WL 41100-03 Diaphragm Check Valve

Description

Combo-Rate Saddle/Body, 1 Way, 3/8” Inlet with Manual Shutoff Valve............................... Combo-Rate Saddle/Body, 2 Way, 3/8” Inlet with Manual Shutoff Valve *............................. Combo-Rate Saddle/Body, 2 Way, 3/8” Inlet for Blended Pulse Applications....................... Combo-Rate Saddle/Body, 2 Way, 21/32” Inlet for JD Sprayers with Manual Shutoff Valve. Combo-Rate, 3 Way Turret with Manual Shutoff Valve.......................................................... Combo-Rate, 4 Way Turret with Manual Shutoff Valve.......................................................... Combo-Rate, 5 Way Turret with Manual Shutoff Valve.......................................................... Combo-Rate, Viton® Repair Kit - to Repair 2,3,4 & 5 Way Turrets....................................... Combo-Rate, Adapter for TeeJet “Quick Jet” Cap................................................................. Combo-Rate, Male Plug Less U-Clip.................................................................................... Combo-Rate, Stainless Steel U-Clip..................................................................................... Combo-Rate, 10 PSI Diaphragm Check Valve (Less Body Nut & Diaphragm) .................... Combo-Rate, 10 PSI Diaphragm Check Valve With Viton® Diaphragm, Less Body Nut..... Combo-Rate, 4 PSI Diaphragm Check Valve (Less Body Nut & Diaphragm) ...................... Combo-Rate, 15 PSI Diaphragm Check Valve (Less Body Nut & Diaphragm) .................... Combo-Rate, Body Nut for Above Check Valves.................................................................. Combo-Rate, Buna Diaphragm for Above Check Valves...................................................... Combo-Rate, Viton® Diaphragm for Above Check Valves....................................................

Net Ea.

$ 8.40 8.80 CALL 9.20 10.80 10.80 10.80 13.40 1.40 1.00 1.00 1.70 2.00 1.70 1.70 .90 .60 1.90

* 41434-00 is Direct Replacement for 41334-001 (New & Improved Design).

“Combo-Rate” Nozzle Body Systems Combo-Rate Nozzle Body Systems allow you to spray with multiple nozzles (of the same or different sizes) at the same location on the boom, to optimize coverage, canopy penetration and drift control. This allows flowrates and droplet sizes of multiple nozzles to be combined. Unlike conventional nozzle bodies, Combo-Rate nozzle bodies are modular. Constructed of durable glass-filled polypropylene, stainless u-clips and buna o-rings (Viton® available). 10 PSI diaphragm check valves with EPDM are standard (4 PSI Viton® diaphragms are also available).

D D

D D

D

D

WL 41376-00 2-Way Saddle

Part No.

WL 41376-00 WL 41375-00 WL 41110-00 WL 41111-00 WL 41120-00 WL 41121-00 WL 41125-00 WL 41126-00

WL 41375-00 1-Way Saddle

WL 41110-00 2-Way Nozzle Body with Manual Shutoff Valve

WL 41111-00 1-Way Nozzle Body with Manual Shutoff Valve

Description

Combo-Rate Saddle, 2 Way for 1” Pipe, 3/8” Inlet......................... Combo-Rate Saddle, 1 Way for 1” Pipe, 3/8” Inlet......................... Combo-Rate Nozzle Body, 2 Way with Manual Shutoff Valve........ Combo-Rate Nozzle Body, 1 Way with Manual Shutoff Valve........ Combo-Rate Nozzle Body, 2 Way, Air-On Control......................... Combo-Rate Nozzle Body, 1 Way, Air-On Control......................... Combo-Rate 2 Way, Air Off Control............................................... Combo-Rate 1 Way, Air Off Control...............................................

DULTMEIER SALES • OMAHA, NE

(800) 228-9666

Net Ea.

$ 4.50 3.50 5.80 5.30 8.40 7.90 7.40 7.00

www.dultmeier.com

WL 41120-00 2-Way, Air On Control Nozzle Body and WL 41125-00 Air Off

WL 41121-00 1-Way, Air On Control Nozzle Body WL 41126-00 Air Off

Viton® is a registered trademark of DuPont Performance Elastomers

• DAVENPORT, IA

(800) 553-6975

E1043


Boom Fittings • Air Eliminators Express Boom Assembly 1” Schedule 5 Stainless Steel Pipe

UF Clamp & Gasket Included

15” or 20” Nozzle Spacing

Performance Tested to 150 PSI Rating

5-Way ProFlo Nozzle Bodies with EPDM 8 PSI DCV

Equipped with Express Fittings

259

Hypro’s Express Boom Assembly allows you to customize each boom section by choosing the quantity of nozzle bodies either left or right of the tee for each section. Express Boom Assembly has the flexibility to meet any boom design. These single section custom configurations can range from one nozzle body on the left and/or right branch, to five nozzle bodies on each branch. Review the chart below for all configuration options.

Features: • Standard configuration 1” Sch 5 SS pipe. 20” spacing. Express fittings, 5-way ProFlo nozzle with EPDM 8 PSI DCV.

Quick Shutoff & Easy Cleanout with Express End Cap

• Simplifies manufacturing process, assembly time and product numbers. • Performance tested to 150 PSI rating. • A complete assembly to eliminate any assembly defects.

Look For This Express Boom Assembly on Our Website: www. dultmeier.com for the PDF on Configurations & Pricing !

Express Boom Fittings Eliminates the Shut-Off Lag Time Developed to eliminate the shut-off lag time that can result in 70 ft. of overspray. The Express End Cap allows the compressed air trapped in the boom to bleed out, resulting in a much faster managed shut-off. You can easily retrofit 1” stainless, aluminum and poly pipe booms. For more detail ask for Tech Bulletin #2012-02. 7433-2610 1” Express Fitting x 1” HB Elbow

D D

D

7433-2503 1” Express Fitting x 1” Flange

7433-33140 1” High Flow Express End Cap with Plug for JD 7433-3316 Cleanout Plug

D

7433-2502 1” Express Fitting x 1” Straight Flange

D D

7433-2613 1” Express Fitting x 1” Male Cam Lock Straight

7433-2514 Cleanout Plug, O-ring & Retainer Kit

7433-2608 1” Express Fitting x 1” HB Straight

3410-0043 & 3410-0044 Retrofit Kits

Part No. Description HY 7433-33140 1” High Flow Express End Cap with Plug............. HY 7433-3316 1” Standard Flow Express End Cap with Plug...... HY 7433-2502 1” Express Fitting x 1” Straight Flange.................. HY 7433-2503 1” Express Fitting x 1” Flange (2 Pieces).............. HY 7433-2608 1” Express Fitting x 1” HB Straight....................... HY 7433-2610 1” Express Fitting x 1” HB Elbow.......................... HY 7433-2613 1” Express Fitting x 1” Male Camlock................... HY UFG0100E 1” EPDM Gasket................................................... HY 3410-0044 Retrofit Kit for 1” Standard Flow End Cap............. HY 3410-0043 Retrofit Kit for 1” High Flow End Cap.................... HY 3430-0790 Clamp & Hardware Kit with Pipe O-rings.............. HY 7433-2514 Cleanout Plug, O-ring & Retainer Kit.....................

UFG0100E 1” EPDM Gasket

DULTMEIER SALES • OMAHA, NE

Boom Section Pipe

Net Ea. $ 7.01 7.01 7.01 7.01 7.01

(800) 228-9666

Net Ea. $ 29.45 29.45 15.90 26.75 15.90 15.90 15.90 .86 112.20 112.20 9.15 11.00

Rapid Stop Inlet Adapter

Air Eliminators for Wet Booms TeeJet’s Air Eliminators for Wet Booms Part No. Description SS CP98583-1-3/4 For QJ360C on 3/4” Booms............... SS CP98583-1-1 For QJ360C on 1” Booms.................. SS CP98583-2-3/4 For QJ17560A on 3/4” Booms........... SS CP98583-2-1 For QJ17560A on 1” Booms.............. SS CP98583-3-1 For QJ360F on 1” Booms...................

3430-0790 Clamp & Hardware Kit

Extended height aids in removal of air trapped in the spray boom - shortens tip shutoff/on time. Stainless material. Easily installed.

www.dultmeier.com

• DAVENPORT, IA

(800) 553-6975

E1033


Spraying Systems Quick

260

Triple Nozzle Assemblies

D

Turret Nozzles

Quick TeeJet Triple Nozzle Body for Quick TeeJet Caps

With Fertilizer Outlet

Provides three spray posi­tions for easy change of spray tips. Includes diaphragm shut-off. With 1/4 FPT connection. Standard EPDM diaphragm. Standard check pressure is 10 PSI (2,5,8,15 & 20 available). Designed for use with the Vari-Spacing Clamp. 24231 is for 1/2” & 3/4" hose barb sizes. 24216 is for 3/4" or 1" Pipe. Pressures to 125 PSI. Maximum Temperature is 125° F.

The QJ363F Turret Nozzle employs a single fixed large volume bottom outlet for fertilizer application.The 3/4/5 turret outlets will deliver 2.25 gpm at a 5 psi drop. Viton® internals. Opening pressure is 10 psi and maximum pressure is 300 psi. Illustrated for a 1" pipe wet boom. For dry booms, select the single or double connectors listed below. CP98488-VI John Deere Retrofit Seal

24216 24231-NYB

Double Hose Shank 1/4" FPT

D

Single Hose Shank 1/4" FPT

18646 18725

18645

Part No. Net Ea. SS 24216-1/2NYB TeeJet Triple Nozzle Body - 1/2".............. $ 12.65 SS 24216-3/4NY TeeJet Triple Nozzle Body - 3/4".............. 12.65 SS 24216-1NYB TeeJet Triple Nozzle Body - 1"................. 12.65 SS 24231NYB TeeJet Triple Nozzle Body with 1/4" Inlet. 13.30 SS 18645-1/2 Single Hose Shank - 1/2" Hose............... 2.26 SS 18724-3/4 Single Hose Shank - 3/4' Hose................ 2.27 SS 18646-1/2 Double Hose Shank - 1/2" Hose............... 2.26 SS 18725-3/4 Double Hose Shank - 3/4" Hose............... 2.26 Note: 21950-2,5,8,15,20NYB End Caps Available.

• 1/4" NPT male inlet connection.11/16” MPT Outlet D

- QJ39685 Series Features: Made of black nylon material • 300 PSI maximum • Viton ® Diaphragm is standard • Standard drip-free check pressure is 10 PSI (2, 5, 8, 15 & 20 PSI available) • Maximum Temperature is 125° F. • Used with Quick TeeJet Caps • Hose Shank Available as Single (Left or Right) or Double for 1/2" I.D. Hose • Made of Corrosion Resistant Materials • Drip Free Positive Shut-Off

D

• Nylon with stainless steel diaphragm spring

8360NYB

For use with standard round and square boom clamps with all styles of QuickJet Caps. Available in right or left Single L or Double T for 1/2" hose.

13431NY Long Shank Nozzle Body shown with Cap No. 8476NY

8360NYB & 13431NY Nylon Diaphragm Nozzle Bodies are supplied less the Nozzle, Cap & Strainers. For rates up to 1-1/2 GPM. The springbacked diaphragm valve provides positive closure when pressure is shut off. The 13431NY Nozzle has a longer threaded shank for use with Vari-Spacing type clamps. 10 PSI check valve is standard (2, 5, 8, 15 & 20 PSI also available). Maximum temperature is 125° F. Part No. Net Ea. SS 8360NYB Check Valve with Viton® Diaphragm.... $ 11.00 SS 13431NY Long Shank Diaphragm Nozzle........... 10.30 SS 4676NY-1/4 Nylon Adaptor Caps, 11/16” x 1/4” FPT 1.61 SS 21950-10NYB *10 PSI End Cap Assembly - Less Diaphragm 1.05 SS 21953VI Raised Viton® Diaphragm After 1988.. 1.01 SS CP21953-EPR EPDM Diaphragm................................ .37 *Note: 21950-2,5,8,15,20NYB End Caps Available.

Nozzle Assemblies

• Maximum Operating Pressure is 300 PSI QJ39685-1L500 Single Left

Fertilizer outlet with blank shutoff cap & gasket

Diaphragm Nozzles

Diaphragm Check Valve Assemblies

D

D

Bottom Outlet Max. Part No. GPM @ 5 PSI Drop PSI Connections Net Ea. SS QJ363F-1NYBVI 3.2 300 3 & 1 Outlets   $ 14.40 SS QJ383F-1NYBVI * 4.7 150 3 Outlets 20.25 SS QJ364F-1NYBVI 3.2 300 4 & 1 Outlets 14.35 SS QJ365F-1NYBVI 3.2 300 5 & 1 Outlets 14.35 SS CP50104NYB 1" Single Connector....................................... 1.62 SS CP50114NYB 1" Double Connector .................................... 1.91 SS CP98488-VI JOHN DEERE Retrofit Seal - Adapts to any QJ TeeJet Wet Boom with 3/8” inlet to larger 11/16” hole on John Deere Wet Boom. 4.57 * High Flow

D

D

SYSTEM

QJ7421-NYB Series

TYPE QJ7421-NYB

QJ39685-1R500 Single Right

• Can be mounted to 1/2”, 3/4” or 1” pipe or equivalent size tubing. • Mounts to a 3/8” (9.5mm) hole drilled in pipe or tubing. • Maximum operating pressure is 300 PSI. Part No. To Clamp On Net Ea. SS QJ7421-1/2NYB * 1/2” Pipe $ 2.42 SS QJ7421-3/4NYB * 3/4” Pipe 2.40 SS QJ7421-1NYB 1” Pipe 2.40 * 1/2” & 3/4” sizes include a mounting hole in the upper clamp subassembly for mounting to flat surfaces.

D

QJ39685-2500 Double Hose

D

D

QJ7421-NYB

Blank Split Eyelet

Part No. Net Ea. SS QJ39685-1R500 Single Right Check Valve ........... $ 4.66 SS QJ39685-1L500 Single Left Check Valve ............. 4.66 SS QJ39685-2500 Double Hose Check Valve .......... 4.66 SS 21953VI Viton® Diaphragm ....................... 1.01 SS CP21953-EPR EPDM Diaphragm........................ .37 Note: 21950-2,5,8,15,20NYB End Caps Available.

For 1" Wet Booms

D

• Used On Booms that Include Multiple Nozzle Spacing Positions. • Viton® O-Rings - 300 PSI

Part No. Net Ea. SS QJS-P0-1 Blank Split Eyelet for 1” Wet Booms ........... $ 2.55

Viton® is a registered trademark of DuPont Performance Elastomers

DULTMEIER SALES • OMAHA, NE

(800) 228-9666

www.dultmeier.com

• DAVENPORT, IA

(800) 553-6975

E0359


Nozzle Bodies • Nozzle Body Turrets “Jumbo” High Volume 5-Way Nozzle Turrets

QJ370 Nozzle Body Turrets High Flow Rates In A Compact Design

Viton®

For John Deere Sprayers with 1” Booms with 11/16” Diameter Boom Holes These High Volume 5-Way Nozzle Turrets are designed as direct replacements for John Deere Sprayers with 1” Booms with 11/16” diameter boom holes. Easy Fit Connection for 1” pipe; includes stainless screw and nut. Standard with Viton® diaphragms. High volume - 6 GPM at 5 PSI pressure drop. Check valve closes at 12 PSI. 5 Nozzle lugs fit QuickJet 90° turn caps. Rated to 145 PSI. Part No. AG 51 AG 51-V AG 51-CV

261

Wet Boom Style

D

D

D

Dry Boom Style

Description Net Ea. Jumbo 5-Way Nozzle Turret for 1” Boom........ $ 25.00 Replacement Viton® Diaphragm for Above.... 2.55 Replacement 12 PSI Check Valve for Above. 2.65

• Compact high flow nozzle body with choice of 3 or 5 Outlets & 1/2”, 3/4” or 1”. • Positive indexing and shut-off between each spray position. • Flow rate for three outlet: 2.6 GPM @ 5 PSI; 3.6 GPM @ 10 PSI.

QJS Stackable Nozzle Bodies for Wet & Dry Booms

• Flow rate for five outlet: 2.4 GPM @ 5 PSI; 3.4 GPM @ 10 PSI. • Available with 1/2”, 3/4” & 1” single or double hose barb. • 10 PSI diaphragm check standard. • Viton® o-rings and diaphragm. • Hinged upper clamp & stainless steel bolt with captured nut reduces installation time. • Automatic spray tip alignment for use with Quick Teejet® caps. • Notched inlet tube reduces sediment buildup. • Mounts to 3/8” hole in pipe (Wet Boom Style). • Body features mounting lugs for use with Teejet® Vari-Spacing clamps for attaching to dry boom sprayers. • Maximum pressure of 300 PSI. Wet Boom Versions:

D

• Multiple outlet, stackable nozzle body is ideal for both pull-type and selfpropelled sprayers.

Part No. SS QJ373-1/2NYB SS QJ373-3/4NYB SS QJ373-1NYB SS QJ375-1/2NYB SS QJ375-3/4NYB SS QJ375-1NYB

• Wet boom configuration offered with choice of bottom or side inlet in five different boom diameters; dry boom versions also available in three sizes.

Dry Boom Versions (Hose Barbs Included):

QJS Shown with Optional ChemSaver®

Part No. SS QJ373-500-1NYB SS QJ373-500-2NYB SS QJ373-750-1NYB SS QJ373-750-2NYB SS QJ373-1000-1NYB SS QJ373-1000-2NYB

• Can be equipped with any combination of TeeJet ChemSaver® tip shutoffs including: pneumatic, electric, manual or spring-loaded check valve. • Choose from one to three outlets in an in-line configuration or up to four outlets in a parallel (tee) configuration. • Maximum operating pressure of 300 PSI.

Description Net Ea. 3 Outlet QuickJet Nozzle Body for 1/2” Pipe............... $ 8.26 3 Outlet QuickJet Nozzle Body for 3/4” Pipe............... 8.26 3 Outlet QuickJet Nozzle Body for 1” Pipe.................. 8.26 5 Outlet QuickJet Nozzle Body for 1/2” Pipe............... 8.26 5 Outlet QuickJet Nozzle Body for 3/4” Pipe............... 8.26 5 Outlet QuickJet Nozzle Body for 1” Pipe.................. 8.26

Description Net Ea. 3 Outlet QuickJet Nozzle Body with 1/2” Single HB.... $ 10.65 3 Outlet QuickJet Nozzle Body with 1/2” Double HB.. 10.65 3 Outlet QuickJet Nozzle Body with 3/4” Single HB.... 10.65 3 Outlet QuickJet Nozzle Body with 3/4” Double HB.. 10.65 3 Outlet QuickJet Nozzle Body with 1” Single HB....... 10.65 3 Outlet QuickJet Nozzle Body with 1” Double HB..... 10.65

Note: For 5 Outlet Versions, Order SS QJ375-XXX-1 (or 2) NYB.

• Flow rating of 2.75 GPM at 5 PSI pressure drop and 4.0 GPM at 10 PSI pressure drop. • Wetted parts are nylon and Viton®.

To Deliver the Best

• Many Variations Available - CALL

Possible Service to Our Customers,

CALL US FOR DETAILS !

Dultmeier Sales Strives to Live Up to A Set of Core Values, One of Which is to “Drive Change”

DULTMEIER SALES • OMAHA, NE

(800) 228-9666

www.dultmeier.com

• DAVENPORT, IA

Proactively improve processes and procedures

(800) 553-6975

E1116


Quick

262

SYSTEM

Diaphragm Check Valves

Nozzle Assemblies

– Top Style –

Less Caps

D

Low profile design allows maximum protection against damage. Drip-Free shutoff. Opens at 10 PSI. Standard Viton® diaphragm. Pressure to 125 PSI. Standard check pressure is 10 PSI. (2, 5, 8, 15 & 20 PSI also available). 2.0 GPM @ 5 PSI. Maximum Temperature is 125° F.

D

QJ360 Nozzle Assemblies for Wet or Dry Booms

Available in 3, 4 or 5 nozzle style with QJ363 Viton® diaphragm. Pressures to 300 psi, opens at 10 psi. 2.25 GPM @ 5 PSI and 3.20 GPM at 10 PSI. Maximum Temperature is 125° F. D For wet pipe booms use either 3/4" CP38936NYB or 1". For dry booms always use the CP38938NYB 3/4NYB version and add the 1/2", CP38940NYB 3/4" or 1" single or double hose connectors.For dry boom mounting use QJ Round or Square VariD Spacing clamps on adjacent page. CP38937NYB Standard Check Pressure is 10 PSI. CP38939NYB (2, 5, 8, 15 & 20 PSI also available) CP38941NYB

QJ364

D

QJ365

D

Part No. Net Ea. SS 22251-3/8 Single Shank Check Valve, 3/8" Hose.................... $ 5.54 SS 22251-1/2 Single Shank Check Valve, 1/2" Hose.................... 5.54 SS 22251-3/4 Single Shank Check Valve, 3/4" Hose.................... 5.54 SS 22252-3/8 Double Shank Check Valve, 3/8" Hose................... 5.54 SS 22252-1/2 Double Shank Check Valve, 1/2" Hose................... 5.54 SS 22252-3/4 Double Shank Check Valve, 3/4" Hose................... 5.54 SS 21953VI Diaphragm (Viton®) for Check Valve...................... 1.01 SS CP21953-EPR Diaphragm (EPDM) for Check Valve....................... .37 SS 58140 Manual Nozzle Shut-Off.......................................... 3.50 Note: 21950-2,5,8,15,20NYB End Caps Available.

Check Valves 19351 Triple Check Valve

QJT8360NYB Check Valve Adapter 11/16/16F x QuickJet

D

4241N-B121S Diaphragm Check Valve

Net Ea. $ 3.72 3.46 5.27 1.01 .37 1.11 3.50

Split Eyelets

Hose Shank Bodies

D

- 125 PSI D

D

18635-3/8 18638-1/2 18719-3/4 Single Hose Shank Body-1/2 or 3/4" Barb Part No. SS 18635-3/8 SS 18638-1/2 SS 18719-3/4 SS 18636-3/8 SS 18639-1/2 SS 18720-3/4 SS 18637-3/8 SS 18640-1/2 SS 18721-3/4

Part No. Net Ea. SS 19349-3/8 Single Shank Check Valve, 3/8" Hose.................... $ 6.61 SS 19349-1/2 Single Shank Check Valve, 1/2" Hose.................... 6.61 SS 19349-3/4 Single Shank Check Valve, 3/4" Hose.................... 6.61 SS 19350-3/8 Double Shank Check Valve, 3/8" Hose................... 6.61 SS 19350-1/2 Double Shank Check Valve, 1/2" Hose................... 6.61 SS 19350-3/4 Double Shank Check Valve, 3/4" Hose................... 6.61 SS 19351-3/8 Triple Shank Check Valve, 3/8" Hose...................... 6.61 SS 19351-1/2 Triple Shank Check Valve, 1/2" Hose...................... 6.62 SS 19351-3/4 Triple Shank Check Valve, 3/4" Hose ..................... 6.61 SS 21953VI Diaphragm (Viton®) for Check Valve...................... 1.01 SS CP21953-EPR Diaphragm (EPDM) for Check Valve....................... .37 SS 58140 Manual Nozzle Shut-Off.......................................... 3.50 Note: 21950-2,5,8,15,20NYB End Caps Available.

D

Part No. SS QJ8360NYB Diaphragm Check Valve with 1/4" MPT Inlet. SS QJT8360NYB Diaphragm Check Valve with 11/16"-16 Inlet TW 4241N-B121S Diaphragm Check Valve with 3/8” HB Inlet... SS 21953VI Diaphragm (Viton®) for Check Valve............ SS CP21953-EPR Diaphragm (EPDM) for Check Valve.............. SS 19191EPR Gasket for QJT as extra.................................. SS 58140 Manual Nozzle Shut-Off................................. Note: 21950-2,5,8,15,20NYB End Caps Available.

Maximum Temperature is 125° F.

QJ17560

D

• Viton® Diaphragm QJ22187

• 300 PSI Maximum Pressure

18637-3/8 18640-1/2 18721-3/4 Triple Hose Shank Body-1/2 or 3/4" Barbs Net Ea. Single Shank Body, 3/8", Hose.......... $ 2.31 Single Shank Body, 1/2", Hose.......... 2.40 Single Shank Body, 3/4", Hose.......... 2.40 Double Shank Body, 3/8", Hose......... 2.31 Double Shank Body, 1/2", Hose......... 2.40 Double Shank Body, 3/4", Hose......... 2.40 Triple Shank Body, 3/8", Hose........... 2.31 Triple Shank Body, 1/2", Hose........... 2.40 Triple Shank Body, 3/4", Hose........... 2.40

18636-3/8 18639-1/2 18720-3/4 Double Hose Shank Body-1/2 or 3/4" Barbs

(800) 228-9666

– Side Style & Top Style – • Standard Check Pressure is 10 PSI. 2, 5, 8, 15 & 20 PSI are also available

D

DULTMEIER SALES • OMAHA, NE

D

• Standard Check Pressure is 10 PSI. (2, 5, 8, 15 & 20 PSI also available) • Viton® Diaphragm • 125 PSI Maximum Pressure • Maximum Temperature is 125° F.

D

QJ8360NYB Diaphragm Check Valve

D

19349 Single Check Valve

D

Shown with QuickJet Cap & NozzleHas 1/4" MPT

D

– Side Style –

19350 Double Check Valve

Diaphragm Check Valves • Standard Check Pressure is 10 PSI. (2, 5, 8, 15 & 20 PSI also available) • Viton® Diaphragm • 300 PSI Maximum Pressure • Max Temperature is 125° F. • #8360 Flow Rate is 2.25 GPM @ 5 PSI Drop

22252 Diaphragm Check

22251 Diaphragm Check

Part No. Size Net Ea. SS QJ363-34NYBVI * 3/4" 3-Nozzle Assembly, Viton®, Less connector... $ 10.90 SS QJ363-1NYBVI 1" 3-Nozzle Assembly, Viton®, Less connector... 10.95 SS QJ364-34NYBVI * 3/4" 4-Nozzle Assembly, Viton®, Less connector... 10.95 SS QJ364-1NYBVI 1" 4-Nozzle Assembly, Viton®, Less connector... 10.95 SS QJ365-34NYBVI * 3/4" 5-Nozzle Assembly, Viton®, Less connector... 10.95 SS QJ365-1NYBVI 1" 5-Nozzle Assembly, Viton®, Less connector .. 10.95 SS CP38936NYB 1/2" Single Hose Connector .......................... 1.36 SS CP38938NYB 3/4" Single Hose Connector................................... 1.36 SS CP38940NYB 1" Single Hose Connector................................... 1.34 SS CP38937NYB * 1/2" Double Hose Connector ......................... 1.65 SS CP38939NYB 3/4" Double Hose Connector.................................. 1.64 SS CP38941NYB 1" Double Hose Connector.................................. 1.60 SS 21953VI - Viton® Diaphragm ......................................... 1.01 SS CP21953-EPR - EPDM Diaphragm ........................................... .37 SS 58140 Manual Nozzle Shut-Off............................................... 3.50 * Use on Hose Fed Dry Booms & Add Connections.

– Side Style –

D

• Requires 3/8" Hole in Pipe • Caps, Nozzles, Gaskets Not Included (See other pages).

D

CP25609 Cap

Part No. Net Ea. SS QJ17560-1/2 Split-Eyelet Check Valve for 1/2" Pipe................... $ 3.11 SS QJ17560-3/4 Split-Eyelet Check Valve for 3/4” Pipe................... 3.21 SS QJ17560-1 Split-Eyelet Check Valve for 1" Pipe...................... 3.22 SS QJ22187-3/4 Split-Eyelet Check Valve for 3/4" Pipe .................. 6.84 SS QJ22187-1 Split-Eyelet Check Valve for 1" Pipe...................... 6.74 SS 21953VI Diaphragm (Viton®)................................................. 1.01 SS CP21953-EPR Diaphragm (EPDM)................................................. .37 SS CP25611 QuickJet Cap for 01-08 Orifices, Less Gasket ........ .42 SS CP25609 QuickJet Cap for 10-20 Orifices, Less Gasket ........ .51

Note: 21950-2,5,8,15,20NYB End Caps Available. Viton® is a registered trademark of DuPont Performance Elastomers

www.dultmeier.com

• DAVENPORT, IA

(800) 553-6975

E0358


Quick Nylon Swivels

John Guest Push to Connect Caps & Bodies

D

Both the QJ cap and check body incorporate John Guest end connections for use with 1/4” or 3/8” tube. This is a modified QJ8360NYB. EPDM o-ring in the John Guest insert. Mounting slots will accept 10-24 screws or can be cable tied.Overall length of the cap/body assembly is 3-1/2”.

D

Maximum Temperature is 125° F.

QJ8600-1/4NYB Nylon Single Swivel 1/4" FPT x QuickJet

QJ8600-2 Nylon Double Swivel 1/4" FPT x QuickJet

D

Part No. Net Ea. SS QJ8600-1/4NYB Single Swivel with 1/4" FPT Inlet $ 4.40 SS QJ8600-2 Double Swivel with1/4" FPT Inlet 5.11

45° Angle Adapter 1/4" MPT x 11/16"-16 Thread for Std. Cap

D D D

QJ-1/4TNYB Adapter

QJ-1/4TTNYB

1/4" FPT x QuickJet QJT-NYB 11/16-16 Cap Thread x QJ Adapter

Adapter 1/4" MPT x QuickJet

D

Straight Cap

D

22669-1/4PPB

22674-1/4NYB

45° Angle Adapter 1/4" MPT x QuickJet

D

90° Cap

Swivel Cap

Adapters D

263

SYSTEM

QJ90-1NYR

Nozzle Adapter QuickJet Cap x 90° QuickJet Adapter

Part No. Net Ea. SS 22669-1/4PPB 45° Nozzle Body ,1/4" MPT x 11/16-16 thread......... $ 1.40 SS 22674-1/4NYB 45° Nozzle Body, 1/4" MPT x Quick TeeJet .............. 1.62 SS QJ-1/4TNYB Cap Adapter with 1/4" FPT Inlet. .............................. 1.67 SS QJT-NYB Cap Adapter with11/16"-16 Cap Thread w/ Gasket.. 3.05 SS QJ-1/4TTNYB Cap Adapter with 1/4" MPT Inlet.............................. 1.74 SS 19191EPR Gasket for “QJT” Adaptors (Threaded end).............. 1.11 SS QJ90-1NYR Quick Jet Cap x 90° Quick Jet Adapter..................... 2.58

D

PTC Body

Part No. Net Ea. SS QJ98588-NYR Straight QJ Cap for 1/4” .................................... $ 3.39 SS QJ114938-5/16 Straight QJ Cap for 5/16”................................... 3.33 SS QJ98586-NYR Straight QJ Cap for 3/8” .................................... 3.39 SS QJ98598-90-14 90° Cap for 1/4”.................................................. 4.24 SS QJ98599-90-38 90° Cap for 3/8”.................................................. 4.23 SS QJ98592-1/4-2 PTC Body for 1/4” Tube with 2# Check............. 7.03 SS QJ98592-1/4-5 PTC Body for 1/4” Tube 5# Check..................... 7.06 SS QJ98592-1/410 PTC Body for 1/4” Tube with 10# Check........... 7.03 SS QJ114400-5/16-5 PTC Body for 5/16” Tube with 5# Check........... 7.06 SS QJ114400-5/16-10 PTC Body for 5/16” Tube with 10# Check......... 7.06 SS QJ98590-3/8-2 PTC Body for 3/8” Tube with 2# Check............. 7.03 SS QJ98590-3/8-5 PTC Body for 3/8” Tube with 5# Check............. 7.06 SS QJ98590-3/810 PTC Body for 3/8” Tube with 10# Check........... 7.03 SS QJ114403-1/4 1/4” 90° Swivel Cap with Gasket....................... 8.49 SS QJ114404-5/16 5/16” 90° Swivel Cap with Gasket..................... 8.50 SS QJ114403-3/8 3/8” 90° Swivel Cap with Gasket....................... 8.49 SS 18999EPR EPDM Gasket as Replacement........................ .64 Caps Include EPDM Gasket.

QJ Vari-Spacing Clamps D D

QuickJet Adapters NPT NOZZLE 1/4" NPT NOZZLE

QJ4676-1/8NYR QJ4676-1/4CEL

Adapters 1/8" or 1/4" FPT x QuickJet

QJ4676-45-1/4

Adapter 45° 1/4" FPT x QuickJet

Vari-Spacing Clamps QJ111-3/4 .............For 3/4" Pipe QJ111-1 ................For 1" Pipe QJ111-1-1/4 .........For 1-1/4" Pipe

1/4" NPT NOZZLE

Part No. Discount Net Ea. SS QJ111-3/4 Vari-Clamp for 3/4" Pipe ................................... 10% $ 1.60 SS QJ111-1 Vari-Clamp for 1" Pipe ....................................... 10% 1.60 SS QJ111-1-1/4 Vari-Clamp for 1-1/4" Pipe ................................ 10% 1.60 SS QJ111SQ-3/4 Vari-Clamp for 3/4" Square Tube ....................... 10% 1.60 SS QJ111SQ-1 Vari-Clamp for 1" Square Tube .......................... 10% 1.60 SS QJ111SQ-1-1/4 Vari-Clamp for 1-1/4" Square Tube .................... 10% 1.60 SS QJ111SQ-1-1/2 Vari-Clamp for 1-1/2" Square Tube .................... 10% 1.54 SS QJ125SS-1-1/4 Vari-Clamp Stainless Steel for 1-1/4" Sq. Tube.. 10% 3.51

QJ4676-90-1/4

Adapter 90° 1/4" FPT x QuickJet

Part No. Net Ea. SS QJ4676-1/8NYR 1/8" FPT x QuickJet with EPDM Gasket................. $ 1.33 SS QJ4676-1/4CEL 1/4" FPT x QuickJet with EPDM Gasket................. 1.36 SS QJ4676-45-1/4 45° 1/4 FPT x QuickJet with EPDM Gasket........... 2.59 SS QJ4676-90-1/4 90° 1/4 FPT x QuickJet with EPDM Gasket........... 3.10

Hardi® Adapter

End Cap Assemblies for Diaphragm Check Valves Nylon / Polypropylene Material Less Diaphragm

End Cap Assemblies Opening Part No. Pressures Color Net Ea. SS 21950-2NYB 2 PSI Yellow $ 2.51 SS 21950-5NYB 5 PSI Black 2.49 SS 21950-8NYB 8 PSI Black 2.50 SS 21950-10NYB 10 PSI Black 2.51 SS 21950-15-NY 15 PSI Red 2.50 SS 21950-20NYB 20 PSI Black 2.50 SS CP21953-EPR Raised EPR Diaphragm....... .37 SS 21953VI Raised Viton® Diaphragm.... 1.01

B A

C

D

55240-CELR

Description

• Converts Hardi® snap-fit nozzle body connection to quick TeeJet connection for easy installation of TeeJet tips. Especially used for AIC, XRC & SJ7 tips. • Acetal construction with EPDM gasket for durability & chemical resistance • Accepts standard tip strainers • Maximum operating pressure of 150 PSI

Part No. Net Ea. SS 55240-CELR Adapter to Convert Hardi® Body to TeeJet Tip .... $ 1.60

D

Hardi® Adapter

1/8" Gauge Tubing Connectors Part No.

Vari-Spacing Square Clamps QJ111SQ-3/4 .......For 3/4" Square Tube QJ111SQ-1 ..........For 1" Square Tube QJ111SQ-1-1/4 ....For 1-1/4" Square Tube QJ125SS-1-1/4 .....For 1-1/4" Square Tube QJ111SQ-1-1/2.....For 1-1/2" Square Tube

Net Ea.

SS 21545NY 1/8" Tube Nut (See A).............................. $ 1.10 SS 21486NY 1/8" Union (See B).................................. 1.09 SS 21736NY 1/8"x3/16” Male Coupler + Tube Nut (See C) 2.60

The Hardi Adapter converts Hardi nozzle bodies to Quickjet™ bodies for Quickjet™ or universal caps. Gasket included. Use with CP25611 TeeJet Caps. Note: This adapter is a tight fit with TeeJet Products. Part No. TW 9950-0024

Description Hardi Adapter - Pack of 10

D

Net Ea. $ 6.38

Viton® is a registered trademark of DuPont Performance Elastomers

DULTMEIER SALES • OMAHA, NE

(800) 228-9666

www.dultmeier.com

• DAVENPORT, IA

(800) 553-6975

E0357


Nozzle Parts

264

Polypropylene Connectors Tee’s & Ell’s for 3/8", 1/2" & 3/4" Hose

13438

These Tee’s & Ell’s are injection molded and include a locknut. Designed to mount in an 11/16" I. D. hole in an angle iron etc., or through one of the prefabricated clamp assemblies.

D

Part No. Type

Hose Size:

Std. Pkg.

Std. Pkg. DISCOUNT

MN 3838TT MN 38TL MN 1212TT MN 12TL MN 3434TT MN 34TL MN 8124

3/8" 3/8" 1/2" 1/2" 3/4" 3/4" –

50 50 50 50 25 25 —

25% 25% 25% 25% 25% 25% —

Poly Tee Poly Ell Poly Tee Poly Ell Nylon Tee Nylon Ell Lock Nut

T’s and L’s are supplied with Locknuts.

Hose Shanks

13437

D

D

Part No. SS 13437-540NYB SS 13438-540NYB SS 13439-540NYB

D

13439

Nylon Hose Connectors with 1/2” inlets and 1/4" outlets in elbow, tee & cross styles shown. Maximum Temperature is 125° F.

D

Description Net Ea. Elbow Connector............ $ 2.51 Tee Connector................ 2.53 Cross Connector............. 2.51

Square Boom Clamp Assembly for 1" • 1-1/4" • 1-1/2" OD Tube

D

Clamps for mounting “T” or “L” Nozzle Bodies on square tubing.

Net Ea.

$ 1.28 1.16 1.05 .94 1.68 1.57 .19

For Square Part No. Tube: Pkg. Clamp Material Discount Net Ea. TW B11-1 1" 50 Cad. Plated Steel 10% $ 1.56 TW B11-114 1-1/4" 50 Cad. Plated Steel 10% 1.53 SS AA111SQ-1 1" 50 Cad. Plated Steel 10% 3.14 SS AA111SQ-1-1/4 1-1/4" 50 Cad. Plated Steel 10% 4.72 SS AA111SQ-1-1/2 1-1/2" 50 Cad. Plated Steel 10% 5.62

Round Boom Clamp Assembly

High Volume Tee’s & Ells

Consists of: Upper and Lower Clamps w/Screw

For 3/4" & 1"Hose

- Less the Tip Cap & Strainer -

D

No. 111

Injection molded of Black Nylon for UV resistance, with a Stainless steel insert threaded 11/16"-16 for nozzle attachment. Stainless steel locknuts are included. Designed to mount in an 11/16" I. D. hole in an angle iron etc., or through one of the prefabricated clamp assemblies. Maximum Temperature is 125° F.

D

The clamp assemblies shown above are designed to provide variable nozzle spacing on pipe or tubing sprayer booms. Pipe or tubing is used only to support the nozzles. These clamp assemblies are quoted below less the nozzle bodies but will accommodate the nozzle bodies with hose shank connections shown on this page.

Hose Part No. Type Size Net Ea.

D

SS 12201-3/4 Ell SS 12202-3/4 Tee SS 12201-1 Ell SS 12202-1 Tee

VARI-SPACING

Part No.

3/4" $ 7.84 3/4" 7.85 1" 7.84 1" 7.84

SS AA111-3/4 SS AA111-1 SS AA111-1-1/4

Brass Tee’s & Ell’s - Less Tip Cap & Strainer -

Part No.

Brass

D

For I.D. Hose

Net Ea.

Part No.

Triple Shank Poly Nozzle Bodies Threads are 11/16" x 16 - Supplied with Locknut Maximum Temperature is 140° F. Part No.

Hose Size

Std.Pkg. Net Ea.

TW T38C 3/8" I.D. TW T12C 1/2" I.D. TW T34C 3/4" I.D.

50 50 50

$ 2.65 2.65 2.59

25% Quantity Discount on Standard Packages.

Single Shank Nozzle Bodies

TW 3838DN 3/8" Barb TW 3812DN 1/2" Barb

Discount

Net Ea.

10% $ 2.75 10% 2.75 10% 4.56

D

Nylon Split Eyelet Nozzles Designed for quick installation on wet pipe or tube booms. Mounts in 3/8" hole. Pressures to 150 PSI. Black nylon. Maximum Temperature is 125° F.

D

25775-TNYB Part No. SS 25775-3/4TNYB SS 25775-1TNYB SS CP7717-2110VI

25% $ 1.03 25% 1.03

DULTMEIER SALES • OMAHA, NE

8370B

SS 7421-1/2TNY 1/2" Plated Nylon 11/16"-16 $ 2.71 SS 7421-3/4TNY 3/4" Plated Nylon 11/16"-16 2.71 SS 7421-1TNY 1" Plated Nylon 11/16"-16 2.71 SS 7421-1/2TSS 1/2" Plated Stainless 11/16"-16 8.78 SS 7421-3/4TSS 3/4" Plated Stainless 11/16"-16 8.79 SS 7421SS-1TSS 1" Stainless Stainless 11/16"-16 14.70 SS 8370B114-14 1-1/4" Stainless Stainless 1/4" FPT 24.65 SS 8370B114-38 1-1/4" Stainless Stainless 3/8" FPT 24.65 SS 8370B114-12 1-1/4" Stainless Stainless 1/2" FPT 24.65 SS 7418BU Replacement Buna Gasket....................... 1.93

D

Std. Std.Pkg. Pkg. Discount Net Ea.

50 50

50 50 50

Fits Clamp OUTLET Pipe & Bolts Material Threaded Net Ea.

- Polypropylene -

With 11/16-16 TeeJet thread. Can be used with standard tips, caps, strainers and orifice discs. Ideal for use in dribbling or streaming operations. Lock nut is included. Maximum Temperature is 140° F. Part No. Hose Size

3/4" Pipe 1" Pipe 1-1/4" Pipe

The easiest and fasted way to mount spray nozzles to a boom. To install nozzles, drill 9/32" hole, insert Split-Eyelet inlet and clamp assembly in place. Elevated inlet 7421 keeps sediment out of nozzle. Leakproof gasket included.

D

SS 9191A 1/2"-Ell 1/2" $ 7.58 SS 9192A 1/2"-Tee 1/2" 7.28

D

Std. Pkg.

Split-Eyelet Assemblies

for 1/2" Hose

Machined from brass stock, these Tee’s & Ell’s have an 11/16"-16 male thread to accept standard nozzle caps and are also threaded internally (1/4" female pipe thread) to accept drop pipes etc.

To Clamp On

(800) 228-9666

www.dultmeier.com

Description Split Eyelet: Fits 3/4" pipe on 1" OD Tube Split Eyelet: Fits 1" Pipe on 1-1/4" OD Tube Viton® O-Ring Replacement

• DAVENPORT, IA

(800) 553-6975

Net Ea. $ 3.34 3.34 .71

E0360


Nozzle Parts Diaphragm Check Valves

D

Type 12328-NY-1/2 1/2" NPT male inlet and female outlet

Nozzle Caps

TYPE 12328NY Made of Nylon with Celcon bonnet. Check valve opens at 7 psi pressure. Male inlet connection and female outlet connection. Choice of 1/2" & 3/4" NPT sizes. Large capacity flow rates: up to 10 GPM for 1/2" NPT size, up to 15 GPM for 3/4" NPT size. Overall length 3". Weight is 9 ounces. Maximum Temperature is 125° F.

Type 12328-NY-3/4 3/4" NPT male inlet and female outlet connections

TeeJet Adapter Caps fit all bodies having 11/16"-16 Male thread and adapt to the various female pipe thread sizes listed below. Part No. Material FPT Thread Net Ea. SS 4676NY-1/8 Nylon 1/8" $ 1.61 SS 4676NY-1/4 Nylon 1/4" 1.61 SS 4676-1/4 Brass 1/4" 2.00 SS 4676SS-1/8 Stainless 1/8" 6.61 SS 4676SS-1/4 Stainless 1/4" 6.61 SS 4676SS-3/8 Stainless 3/8" 10.85 SS 4676SS-1/2 Stainless 1/2" 14.80 SS 4676SS-3/4 Stainless 3/4" 24.15

D

1/2"Check Valve .................... $ 55.90 3/4"Check Valve .................... 55.90 Replacement Body for 1/2".... 17.90 Replacement Body for 3/4".... 17.90 Replacement Viton® Diaphragm 7.83

4676 Adaptor Cap

Nozzle Bodies

Constructed of 302 and 303 stainless for high strength and corrosion resistance. Ball and spring also 302 stainless. 3/8” Hose barb inlet and 1/4” FPT outlet. 10 PSI opening pressure. Includes #250 stainless orifice disc inside which can be changed by user if desired. 4.0 GPM at 10 PSI or 8.0 GPM at 40 PSI (with included #250 orifice disc). Part No. SS 39188 3/8” HB x 1/4” FPT Stainless Check Valve

Net Ea. $ 19.85

Part No. SS 11750-SS5 Stainless Check Valve SS 11750-PP5 Poly Check Valve

D

D TeeJet Nozzle Bodies have 11/16"-16 Male thread for TeeJet Caps and adapt to the various pipe thread sizes listed below. Std. Std.Pkg. Part No. Material Pipe Thread Pkg. DISCOUNT Net Ea. TW 1/4TTN Nylon 1/4" Male 100 25% $ .58 SS 12094NY Nylon 1/4" Female 100 10% .96 SS 1/8TTB Brass 1/8" Male 100 10% 1.33 SS 1/8TB Brass 1/8" Female 100 10% 1.33 SS 1322 Brass 1/4" Male 100 10% 1.34 SS 1321 Brass 1/4" Female 100 10% 1.34 SS 1/4TTSS Stainless 1/4" Male 100 10% 8.98 SS 1/4TSS Stainles 1/4" Female 100 10% 8.96

D

Poly Strainers with Stainless Screens

Check Valves For larger capacity TeeJet Nozzles where strainers are not required. Ball check opens at 5 PSI. Recommended for flow rates from .40 to 1.5 GPM. Stainless steel or poly construction. Note: Use of these Check Valves results in a pressure drop of 5 PSI.

Winged Cap

Std. Std.Pkg. Part No. Material Style Pkg. DISCOUNT Net Ea. SS CP8027NYB Nylon - 100 10% $ .54 SS 18032ANY Nylon Winged 100 10% .81 SS 1325B Brass Hex 100 10% .81 SS 1325SS Stainless Hex 100 10% 4.91 TW 8027NY Nylon - 100 10% .38 SS CP20230 * Brass - 100 10% .99 * Use with Ceramic Discs & Cores

Adapter Caps

FLOW RATE, G.P.M. 5 7 10 15 20 25 Pressure Drop, p.s.i. 1.0 1.8 3.6 8.2 14.4 23 For 12328-NY-1/2 Pressure Drop, p.s.i. 0.5 0.9 1.9 4.3 7.7 12 For 12328-NY-3/4

Hose Barb Stainless Check Valve

D

1325 Std. Cap

TeeJet Nozzle Caps fit all bodies having 11/16"-16 Male thread.

Part No. Net Ea.

SS 12328NY-1/2 SS 12328NY-3/4 SS 12338-1/2NY SS 12338-3/4NY SS 12335VI

265

— Maximum Temperature is 125° F. —

Part No. Mesh Std. Pkg. DISCOUNT Net Ea. SS 8079-PP24 24- White 100 10% $ .73 SS 8079-PP50 50- Blue 100 10% .73 SS 8079-PP100 100- Green 100 10% .73 SS 8079-PP200 200- Lt. Pink 100 10% .73

D

D

Poly or Stainless

D

Strainers

Net Ea. $ 12.80 3.36

4514 SLOTTED NYLON Strainers one-piece construction for use with liquids containing suspended solids. Maximum temperature is 160° F.

Outlet Hose Barbs

5053 BRASS Strainers with Stainless Screens A three part assembly consisting of body, cap & screw.

Outlet Hose Barbs are used with standard nozzle caps to attach hoses or nozzle drops to standard TeeJet threaded bodies (11/16"-16 thread). Can also be used with the 4916 series orifice discs as flow regulators. Available in poly or stainless. Also fits inside CP25607 QuickJet caps.

4193 POLY CHECK VALVE Strainers with Stainless Screens Polypropylene strainer & check valve prevents nozzle dripping. Fits all TeeJet nozzles. Ball check opens at 5 psi. For flow rates to 0.8 GPM. Also available in brass or stainless. Maximum temperature is 140° F.

Std. Part No. Material Size Pkg. DISCOUNT

TW K8400-1/4 Poly 1/4" TW K8400-3/8 Poly 3/8" TW K8400-1/2 Poly 1/2" SS 4251-250SS S.S. 1/4" SS 4251-400SS S.S. 3/8" SS 4251-500SS S.S. 1/2"

50 25% 50 25% 50 25% - - - - - -

Part No. Body Material SS 5053-50 Brass SS 5053-100 Brass SS 4193A-PP24 Poly Check SS 4193A-PP50 Poly Check SS 4193A-PP100 Poly Check SS 4514-10NY Nylon - BLUE SS 4514-20NY Nylon - RED SS 9106 Brass

Net Ea.

$ .45 .45 .49 3.83 3.83 3.83

Mesh Screen Pkg. Net Ea. 50 Stainless 100 $ 1.71 100 Stainless 100 1.71 24 Stainless 100 2.36 50 Stainless 100 2.36 100 Stainless 100 2.36 50 Slotted Nylon 100 .77 25 Slotted Nylon 100 .77 300 Fused Bronze 100 1.86

Retained Tip Strainers

Blank Discs & Caps

Strainer and gasket as a single unit - keeps strainer attached to the tip and cap when removed from the nozzle body. Designed for AIC and XRC tips but can be used with any QuickJet Caps.

Blank Discs replace the regular boom nozzle when it is desirable to block off certain nozzles for proper nozzle spacing. Std. Part No. Blank Discs Pkg. Net Ea.

D

Viton® is a registered trademark of DuPont Performance Elastomers

(800) 228-9666

D

Part No. Mesh Net Ea. SS 55215-50VI 50M Blue Poly Strainer with Viton® Gasket $ 1.95 SS 55215-100VI 100M Green Poly Strainer with Viton® Gasket 1.95 SS 55215-50 50M Blue Poly Strainer with EPR Gasket 1.02 SS 55215-100 100M Green Poly Strainer with EPR Gasket 1.01

SS 3942AL Aluminum 100 $ .26 SS 3942SS Stainless 100 .41

DULTMEIER SALES • OMAHA, NE

9106 FUSED BRONZE FILTER Brass with fused bronze filter element equivalent to 300 mesh screen. For use with extra low capacity tips.

www.dultmeier.com

• DAVENPORT, IA

(800) 553-6975

E0361


Spray Tips & Nozzles

266

Flat Spray Orifice Tips

Airplane & Helicopter Spraying

40° • 80° • 110°

D

DIAPHRAGM CHECK VALVE NOZZLES

— TAPERED EDGE — D

BRASS

Brass & Stainless Steel

STAINLESS STEEL

Spraying Systems Flat Spray Tapered Edge Interchangeable Orifice Tips for Herbicides, Insecticides and other Chemicals are available in either Brass or Stainless Steel. Color Coded Nylon Tips with Stainless Steel insert are shown on adjacent pages. TeeJet FLAT SPRAY TIP NO. and strainer screen size

20" SPACING

- 40˚ - 80˚ - 110˚ -

Liquid Capacity 4 5 6 7 8 10 Pressure 1 Nozzle MPH MPH MPH MPH MPH MPH in p.s.i. in GPM

SERIES

400067 800067 (100 Mesh) 4001 8001 11001 (100 Mesh) 40015 80015 110015 (100 Mesh) 4002 8002 11002 (50 Mesh) 4003 8003 11003 (50 Mesh) 4004 8004 11004 (50 Mesh) 4005 8005 11005 (50 Mesh) 4006 8006 11006 (50 Mesh) 4008 8008 11008 (50 Mesh) 4010 8010 11010 (No Strainer) 4015 8015 11015 (No Strainer) 4020 8020 11020 (No Strainer)

20 25 30 40 50 60 20 25 30 40 50 60 20 25 30 40 50 60 20 25 30 40 50 60 20 25 30 40 50 60 20 25 30 40 50 60 20 25 30 40 50 60 20 25 30 40 50 60 20 25 30 40 50 60 20 25 30 40 50 60 20 25 30 40 50 60 20 25 30 40 50 60

.05 .055 .06 .067 .07 .08 .07 .08 .09 .10 .11 .12 .11 .12 .13 .15 .17 .18 .14 .16 .17 .20 .23 .25 .21 .24 .26 .30 .34 .37 .28 .32 .35 .40 .45 .49 .35 .40 .43 .50 .56 .61 .42 .47 .52 .60 .67 .74 .57 .63 .69 .80 .89 .98 .71 .79 .87 1.00 1.12 1.23 1.06 1.19 1.30 1.50 1.68 1.84 1.41 1.58 1.73 2.00 2.23 2.45

3.5 3.9 4.3 5.0 5.6 6.1 5.3 5.9 6.4 7.4 8 9.1 7 8.8 9.7 11.1 12.5 13.6 10.5 11.7 12.9 14.9 16.6 18.2 15.8 17.6 19 22 25 27 21 23 26 30 33 36 26 29 32 37 42 45 32 35 39 45 50 55 42 47 52 59 66 73 53 59 64 74 83 91 79 88 97 111 125 136 105 117 128 149 166 182

2.8 3.2 3.5 4.0 4.5 4.9 4.2 4.7 5.1 5.9 6.6 7.3 6.3 7.0 7.7 8.9 10.0 10.9 8.4 9.4 10.3 11.9 13.3 14.6 12.6 14.1 15.4 17.8 19.9 22 16.8 18.8 21 24 27 29 21 23 26 30 33 36 25 28 31 36 40 44 34 38 41 48 53 58 42 47 51 59 66 73 63 70 77 89 100 109 84 94 103 119 133 146

Part No.

FLAT SPRAY

SS 800067BR SS 8001BR SS SS4001 SS SS8001 SS SS800067

.................. thru 8030BR thru SS4030 thru SS8030 ..................

2.4 2.6 2.9 3.3 3.7 4.1 3.5 3.9 4.3 5.0 5.5 6.1 5.3 5.9 6.4 7.4 8.3 9.1 7.0 7.8 8.6 9.9 11.1 12.1 10.5 11.7 12.9 14.9 16.6 18.2 14.0 15.7 17.2 19.8 22 24 17.5 19.6 21 25 28 30 21 23 26 30 33 36 28 31 34 40 44 49 35 39 43 50 55 61 53 59 64 74 83 91 70 78 86 99 111 121

2.0 2.3 2.5 2.8 3.2 3.5 3.0 3.4 3.7 4.2 4.7 5.2 4.5 5.0 5.5 6.4 7.1 7.8 6.0 6.7 7.4 8.5 9.5 10.4 9.0 10.1 11.0 12.7 14.2 15.6 12.0 13.4 14.7 17.0 19.0 21 15.0 16.8 18.4 21 24 26 18.0 20 22 25 28 31 24 27 29 34 38 42 30 34 37 42 47 52 45 50 55 64 71 78 60 67 73 85 95 104

1.8 2.0 2.2 2.5 2.8 3.1 2.6 2.9 3.2 3.7 4.2 4.6 3.9 4.4 4.8 5.6 6.2 6.8 5.3 5.9 6.4 7.4 8.3 9.1 7.9 8.8 9.7 11.1 12.5 13.6 10.5 11.7 12.9 14.9 16.6 18.2 13.1 14.7 16.1 18.6 21 23 15.8 17.6 19.3 22 25 27 21 23 26 30 33 36 26 29 32 37 42 45 39 44 48 56 62 68 53 59 64 74 83 91

For Aerial Spraying

1.4 1.6 1.7 2.0 2.2 2.4 2.1 2.4 2.6 3.0 3.3 3.6 3.2 3.5 3.9 4.5 5.0 5.5 4.2 4.7 5.1 5.9 6.6 7.3 6.3 7.0 7.7 8.9 10.0 10.9 8.4 9.4 10.3 11.9 13.3 14.6 10.5 11.7 12.9 14.9 16.6 18.2 12.6 14.1 15.4 17.8 19.9 22 16.8 18.8 21 24 27 29 21 23 26 30 33 36 32 35 39 45 50 55 42 47 51 59 66 73

D

D

4666B Type 4664B: Made in brass • 1/8" NPT female inlet connection by cap thread • For flow rates up to 1-1/2 GPM • Both at 2.25 GPM @ 5 PSI drop • Type 4666B has 1/8” x 1/8” FM connection. Type QJ8355NYB: Allows use of Quick TeeJet System from 1/8" or 1/4" NPT male connections • Side mounting provides protection • Includes ChemSaver® no-drip shut-off • Requires 10 PSI at the nozzle to open check valve • Standard Viton® diaphragm • Maximum operating pressure of 300 PSI • 2.25 GPM @ 5 PSI drop.

D

Type 8355NYB: Made of Nylon with Nylon/ polypropylene end cap assembly • Check valve opens at 10 PSI pressure • Choice of 1/8" or 1/4" NPT (F) inlet connection • For flow rates up to 2-1/2 GPM • Overall length is 2-3/4" • Maximum operating pressure of 125 PSI • Viton® diaphragm • 1/8” at 2.25 GPM @ 5 PSI drop, 1/4” at 3.9 GPM.

D

Replacement Parts Exploded View

ChemSaver®

Diaphragm Check Valves Back end of Diaphragm Check Valves & Nozzles (Brass & Aluminum)

Back end of Diaphragm Check Valves & Nozzles (Nylon)

CP6227-TEF Diaphragm Teflon (Optional) to be used with No. 4620 Diaphragm

21953VI Diaphragm Viton

Part No. SS 4664 SS 4666B SS QJ8355-1/8NYB SS QJ8355-1/4NYB SS 8355-1/8NYB SS 8355-1/4NYB SS CP4624 SS CP6227-TEF SS 9758BR SS 21953VI SS 4620VI SS CP21953-EPR

$ 2.50 2.50 7.43 6.43 2.51 TeeJet Packaged in 25’s. 10% Quantity Discount on 50+ Of One Size Brass Brass Stainless Stainless Stainless

Viton® is a registered trademark of DuPont Performance Elastomers

(800) 228-9666

The TeeJet Diaphragm Check Valve Nozzle Assembly consists of nozzle body with integral diaphragm check valve less orifice, cap and strainer. TeeJet orifice discs and cores are often used in aerial spraying . . . write for Data Sheet 10945 for list of capacities. 4664B

Per Nozzle Material Net Ea.

DULTMEIER SALES • OMAHA, NE

In this type nozzle the diaphragm check valve is an integral part of the nozzle assembly. Originally developed for use in aerial spraying. Nozzles of this design are now widely used wherever drip-free shut-off is desired. The spring backed diaphragm valve assures dependable closure with minimum pressure loss . . . and is ideal for aerial spraying, since in-flight inertial forces do not affect operation.

www.dultmeier.com

4620VI Diaphragm Viton

9758BR End Cap Sub-Assembly Brass, Aluminum

21950NYB ChemSaver® End Cap Assembly Nylon/polypropylene

CP4624 Retainer Brass, Aluminum

NOTE: Nib on Diaphragm fits into hole in End Cap Assembly

Diaphragm Nozzles: Net Ea. Brass, Less Orifice, Cap & Strainer............. $ 18.00 Brass Diaphragm Check Valve, 1/8” F x 1/8” F. 16.75 Nylon, Less Orifice, Cap & Strainer............. 6.68 Nylon, Less Orifice, Cap & Strainer............. 6.68 Nylon, Less Orifice, Cap & Strainer............. 6.85 Nylon, Less Orifice, Cap & Strainer............. 6.84 Replacement Parts Retainer - Brass, Aluminum......................... 2.28 Diaphragm, Teflon (Optional)....................... .63 End Cap, Sub-Assembly - Brass, Aluminum 2.70 Viton® Diaphragm for Nylon Valves............ 1.01 Viton® Diaphragm for Brass Valves............ 1.05 EPDM Diaphragm for Valves....................... .37

• DAVENPORT, IA

(800) 553-6975

E0363


Spray Tips & Nozzles

267

Disc-Core Type Full Cone & Hollow Cone Spray Tips Hollow Cone Spray Pattern Produced by Cores #13, 23, 25, 45 & 46

* Use CP20229-NY gasket when 4514-NY Nylon slotted strainer is not used.

Cores

Ceramic Core Sizes Available:

Standard cores are made of brass. Also available in ceramic, hardened stainless steel and Nylon. All cores with the exception of ceramic are made with “nibs”. Make sure core is always placed with the nib facing the nozzle body.

Full Cone Spray Pattern

DC13-CER, DC23-CER, DC25-CER, DC31-CER, DC33-CER, DC35-CER, DC45-CER, DC46-CER, DC56-CER

Orifice Discs

Available in a variety of sizes and materials. Ceramic for increased wear life, hardened stainless steel, stainless steel and polymer.

Produced by Cores #31, 33, 35 & 56

Ceramic Disc Sizes Available: DCER-2 thru DCER-8, DCER-10.

Strainer Note:

For nozzles using orifice disc numbers 1, 1.5 and 2, or core numbers 31 and 33, slotted strainer number 4514-20 equivalent to 25 mesh screen size is required. For all other larger capacity discs and cores, slotted strainer number 4514-32 equivalent to 16 mesh screen size is required.

CP26277-1-NY Quick TeeJet® Cap For ceramic disc & core.

Part No. SS D1 thru D16 SS DE1 thru DE16 SS DCER1 thru DCER10 SS DVP-2 thru DVP-8

Discs: Net Ea. Hardened Stainless Disc....................... $ .93 Stainless Disc........................................ .93 Ceramic Disc......................................... 2.61 Polymer Disc.......................................... .65

SS DC13CER thru DC56CER SS DC31HSS thru DC56HSS SS DC13 thru DC56 SS DC13NY thru DC56NY SS CP20230 SS CP26277-1 SS CP20229-NY SS 18999EPR

Water @ 70° F.

Water @ 70° F.

DULTMEIER SALES • OMAHA, NE

(800) 228-9666

Cores: Ceramic Core................................ $ 3.98 Hardened Stainless Core.............. 3.95 Brass Core.................................... 1.65 Nylon Core.................................... .94

Replacement Parts Brass Cap............................................... $ .99 Black QJ Cap.......................................... .51 Nylon Gasket.......................................... .81 EPDM Gasket......................................... .64

Viton® is a registered trademark of DuPont Performance Elastomers

www.dultmeier.com

• DAVENPORT, IA

(800) 553-6975

E1007


Quick

268

SYSTEM

COLOR-CODED “Quick TeeJet” CAPS For instant nozzle tip identification

QuickJet Caps are available in 10 colors, and 11 different styles enabling you to develop your own color coding system. The caps are designed with grooves that fit locating lugs on the nozzle body. Caps are made of Celcon and are available for use with all spray tips used in TeeJet nozzles.

Quick TeeJet Cap

Seat Gasket

19438-EPR (EPDM)

Caps are supplied less Gaskets

19438-VI (Viton)

Color Code of Quick TeeJet Caps

QuickJet Caps Less Gasket

Use With Spray Tips:

See Our Website for the Most Current Version of This Chart TQ150 Double Orifice Tip

CP25611*

CP25611-9PP††

D

CP25609*

Quick TeeJet Caps are designed with grooves that fit locating lugs on the nozzle body. Caps are made of Nylon and are available for use with all TeeJet Spray Tips.

CP25597* 02-06

TP Standard: -30 & Above

CP98578-1NY†

FOR PRESSURES UP TO 300 PSI 08-15

CP25595* D

CP25599*

New Celcon QuickJet Cap CP25611, CP25597 & CP25607

CAP VARIATIONS

CP25607*

QJ4676-1/4CEL

1/4" FPT Adapter Has 1/4" FPT thread for drop pipe, pressure gauge, etc. Available in Black only with EPDM Gasket

CP25607-9PP††

CP25607* Flow Regulators

18999EPR (EPDM Standard) 18999VI (VITON® Optional)

QJ19843CELR

Blank Cap with Gasket To Temporarily shut-off selected Nozzles Available in Black only with EPDM Gasket

CP26277†

QJ4676-45-1/4

THE CAPS LISTED BELOW ARE FOR HARDI NOZZLE BODIES

45° Quick TeeJet Cap with 1/4" FPT With EPDM Gasket

CP21399* with HARDI Gaskets

QJ4676-90-1/4

02-06

CP23307* with HARDI Gaskets

90° Quick TeeJet Cap with 1/4" FPT With EPDM Gasket

CP58350* with HARDI Gaskets

Use with Quick TeeJet nozzle bodies to extend body length by 1”. Used to eliminate interference of spray pattern with sprayer boom. Nylon body. EPDM gasket.

50854NYB

* Specify color code (see chart). Violet (10) only available in CP25611 & CP25596 Nylon caps. † .These Quick TeeJet Caps available only in Black. †† Polypropylene Quick TeeJet Caps available only in gray & rated to 150 PSI (10 bar).

QuickJet Caps Less Gasket - Specify Color Number 1 2 3 4 5 6 7 8 9* 10 Part No. Black White Red Blue Green Yellow Brown Orange PP Gray Violet Net Ea. SS CP25611 x x x x x x x x x x $ .42 SS CP25609 x x x x x x x x x .49 SS CP25597 x x x x x x x x x .49 SS CP98578-1NY x .97 SS CP25595 x x x x x x x x .53 SS CP25599 x x x x x x x x .51 SS CP25607 x x x x x x x x x .49 SS CP26277 † x .51 SS CP21399 † x x x x x x x x x .83 SS CP23307 † x x x x x x x x x .85 SS CP58350 x x x x x x x x x .45 x = Cap is available in that color. *Polypropylene Caps (9) are an additional 15%. † = Includes CP23308 Hardi EPDM Gasket. If using TeeJet Strainer, CP26227 Gasket is Required.

DULTMEIER SALES • OMAHA, NE

(800) 228-9666

Part No. Net Ea. SS QJ4676-1/4CEL Threaded Cap, 1/4" FPT with Gasket ............. $ 1.36 SS QJ19843CELR Blank Cap With Gasket.................................... 1.34 SS 50854NYB Extender Cap with Gasket............................... 2.33 SS QJ4676-45-1/4 45° Quick TeeJet Cap, 1/4" FPT....................... 2.59 SS QJ4676-90-1/4 90° Quick TeeJet Cap, 1/4" FPT....................... 3.10 SS 19438EPR Single EPDM Gasket for QuickJet Caps.......... .56 SS 19438VI Single Viton® Gasket for QuickJet Caps........ 1.45 SS PK19438EPR Pkg. of 12 EPDM Gaskets for QuickJet Caps 5.80 SS PK19438VI Pkg. of 12 Viton® Gaskets for QuickJet Caps 16.45 SS 18999EPR EPDM Gasket for Flow Regulators, D-Discs & Cores .64

www.dultmeier.com

Viton® is a registered trademark of DuPont Performance Elastomers

• DAVENPORT, IA

(800) 553-6975

E0950


Spray Tips & Nozzles Gallon Per Acre Gallon Per Acre Liquid Capacity Drop 20" SPACING 30" SPACING Size Pressure 1 Nozzle 5 6 7 8 5 6 7 8 80° 110° SERIES SERIES in PSI in GPM 80° 110° MPH MPH MPH MPH MPH MPH MPH MPH

TIP NO.

TIP COLOR

( Strainer Screen Size)

15

XR1101VS 20 XR8001 (100 Mesh) 30 (100 Mesh)

Orange

Green

XR80015 (100 Mesh)

Yellow

XR8002 (50 Mesh)

Blue

XR8003 XR8003VK (50 Mesh)

Red

XR8004 XR8004VK (50 Mesh)

Brown

XR8005 XR8005VK (50 Mesh)

Gray

XR8006 XR8006VK (50 Mesh)

White

XR8008 XR8008VK (50 Mesh)

Stainless Steel

XR8010SS (50 Mesh)

Stainless Steel

XR8015SS (50 Mesh)

XRC Polymer F = Fine

269

40 60 15 XR110015VS 20 XR110015VP 30 (100 Mesh) 40 60 XR11002VS 15 XR11002VK 20 30 XR11002VP 40 (50 Mesh) 60 XR11003VS 15 XR11003VK 20 30 XR11003VP 40 (50 Mesh) 60 XR11004VS 15 XR11004VK 20 30 XR11004VP 40 (50 Mesh) 60 XR11005VS 15 20 XR11005VK 30 XR11005VP 40 (50 Mesh) 60 XR11006VS 15 20 XR11006VK 30 XR11006VP 40 (50 Mesh) 60 XR11008VS 15 20 XR11008VK 30 XR11008VP 40 (50 Mesh) 60 15 XR11010SS 20 (50 Mesh) 30 40 60 15 XR11015SS 20 (50 Mesh) 30 40 60 15 XRC11020VP 20 (20 Mesh) 30 40 60

VF = Very Fine

M = Medium

.06 F F 3.6 3.0 2.6 2.3 2.4 2.0 1.7 1.5 .07 F F 4.2 3.5 3.0 2.6 2.8 2.3 2.0 1.8 .09 F F 5.1 4.3 3.7 3.2 3.4 2.9 2.5 2.1 .10 F F 5.9 5.0 4.2 3.7 4.0 3.3 2.8 2.5 .12 F VF 7.3 6.1 5.2 4.6 4.9 4.0 3.5 3.0 .09 M F 5.5 4.5 3.9 3.4 3.6 3.0 2.6 2.3 .11 F F 6.3 5.3 4.5 3.9 4.2 3.5 3.0 2.6 .13 F F 7.7 6.4 5.5 4.8 5.1 4.3 3.7 3.2 .15 F F 8.9 7.4 6.4 5.6 5.9 5.0 4.2 3.7 .18 F F 10.9 9.1 7.8 6.8 7.3 6.1 5.2 4.6 .12 M M 7.3 6.1 5.2 4.5 4.8 4.0 3.5 3.0 .14 M F 8.4 7.0 6.0 5.3 5.6 4.7 4.0 3.5 .17 F F 10.3 8.6 7.4 6.4 6.9 5.7 4.9 4.3 .20 F F 11.9 9.9 8.5 7.4 7.9 6.6 5.7 5.0 .25 F F 14.6 12.1 10.4 9.1 9.7 8.1 6.9 6.1 .18 M M 10.9 9.1 7.8 6.8 7.3 6.1 5.2 4.5 .21 M M 12.6 10.5 9.0 7.9 8.4 7.0 6.0 5.3 .26 F F 15.4 12.9 11.0 9.7 10.3 8.6 7.4 6.4 .30 F F 17.8 14.9 12.7 11.1 11.9 9.9 8.5 7.4 .37 F F 22 18.2 15.6 13.6 14.6 12.1 10.4 9.1 .24 C M 14.5 12.1 10.4 9.1 9.7 8.1 6.9 6.1 .28 M M 16.8 14.0 12.0 10.5 11.2 9.3 8.0 7.0 .35 M M 21 17.2 14.7 12.9 13.7 11.4 9.8 8.6 .40 M M 24 19.8 17.0 14.9 15.8 13.2 11.3 9.9 .49 F F 29 24 21 18.2 19.4 16.2 13.9 12.1 .31 C M 18.2 15.2 13.0 11.4 12.1 10.1 8.7 7.6 .35 C M 21 17.5 15.0 13.1 14.0 11.7 10.0 8.8 .43 M M 26 21 18.4 16.1 17.2 14.3 12.3 10.7 .50 M M 30 25 21 18.6 19.8 16.5 14.1 12.4 .61 F F 36 30 26 23 24 20 17.3 15.2 .37 C C 22 18.2 15.6 13.6 14.5 12.1 10.4 9.1 .42 C M 25 21 18.0 15.8 16.8 14.0 12.0 10.5 .52 M M 31 26 22 19.3 21 17.2 14.7 12.9 .60 M M 36 30 25 22 24 19.8 17.0 14.9 .74 M F 44 36 31 27 29 24 21 18.2 .49 VC C 29 24 21 18.2 19.4 16.2 13.9 12.1 .57 VC C 34 28 24 21 22 18.7 16.0 14.0 .69 C C 41 34 29 26 27 23 19.6 17.2 .80 M M 48 40 34 30 32 26 23 19.8 .98 M M 58 49 42 36 39 32 28 24 .61 XC VC 36 30 26 23 24 20 17.3 15.2 .71 VC C 42 35 30 26 28 23 20 17.5 .87 C C 51 43 37 32 34 29 25 21 1.00 C M 59 50 42 37 40 33 28 25 1.23 C M 73 61 52 45 49 40 35 30 .92 XC VC 55 45 39 34 36 30 26 23 1.06 XC VC 63 53 45 39 42 35 30 26 1.30 VC VC 77 64 55 48 51 43 37 32 1.50 VC C 89 74 64 56 59 50 42 37 1.84 C C 109 91 78 68 73 61 52 45 1.22 XC 72 60 51 45 48 40 34 30 1.41 XC 84 70 60 52 56 47 40 35 1.73 VC 103 86 74 64 69 57 49 43 2.00 VC 119 99 85 74 79 66 57 49 2.45 VC 146 121 104 91 97 81 69 61

C = Coarse

VC = Very Coarse XC = Extra Coarse - Larger Droplets for Best Drift Control

Extended Range Flat Spray Tips Stainless • Ceramic • Polymer XR Extended Range TeeJets are the best selection for Pre-Emergence Surface Applied Herbicides at 20-30 psi or Post-Emergence Systemic D Herbicides at 15-20 psi. Can also be used for Post Emergence Contact Herbicides at 30-60 psi At 15 PSI At 60 PSI or Pre-Plant incorporated products at 15-20 psi. Maximum temperature is 125° F. XR Tips have excellent pattern distribution at 15 to 60 psi. Drift is minimized at lower pressures and coverage is good at high pressure. Available in 80 or 110 degree patterns. VS Tips: Sizes 1 through 8 are colorcoded with a stainless insert.

D D

XRC Nozzle Cap Assembly with Gasket

VK Tips: Sizes 2 through 8 are color-coded with a ceramic insert. Larger sizes are all stainless. VP Tips: All polymer material. Part No.

XR Color Coded Tips

Net Ea.

SS XR8001VS thru SS XR8008VS $ 4.16 SS XR8002VK thru SS XR8008VK 3.24 SS XR11001VS thru SS XR11008VS 4.14 SS XR11002VK thru SS XR11008VK 3.23 XR All Stainless Steel Tips

SS XR8010SS thru SS XR8015SS 4.99 SS XR11010SS thru SS XR11015SS 4.99 XR All Polymer Tips

Part No. Net Ea. SS XR110015VP thru SS XR11008VP 1.86 SS XRC11001VS thru SS XRC11008VS Nozzle/Cap Assembly with EPDM gasket............ $ 4.80 SS XRC80015VS thru SS XRC8006VS Nozzle/Cap Assembly with EPDM gasket............ 4.80 TeeJet Packaged in 25’s. SS XRC11002VK thru SS XRC11008VK Ceramic Nozzle & Cap Assembly with EPDM gasket... 3.91 10% Quantity Discount on 50+ Of One Size SS XRC11008VP thru SS XRC11020VP Polymer Nozzle & Cap Assembly with EPDM gasket... 2.23

TIP COLOR

TIP NO.

Gallon Per Acre Gallon Per Acre Liquid Capacity Drop 20" SPACING 30" SPACING Pressure 1 Nozzle Size 5 6 7 8 5 6 7 8 80° 110° in GPM 80° 110° in PSI MPH MPH MPH MPH MPH MPH MPH MPH SERIES SERIES (Strainer Screen Size)

.09 F F 5.1 4.3 3.7 3.2 3.4 2.9 2.5 2.1 .09 F F 5.6 4.6 4.0 3.5 3.7 3.1 2.6 2.3 Orange .10 F F 5.9 5.0 4.2 3.7 4.0 3.3 2.8 2.5 45 .11 F VF 6.3 5.3 4.5 3.9 4.2 3.5 3.0 2.6 60 .12 F VF 7.3 6.1 5.2 4.6 4.9 4.0 3.5 3.0 30 .13 F F 7.7 6.4 5.5 4.8 5.1 4.3 3.7 3.2 80015VS 110015VS 35 .14 F F 8.3 6.9 6.0 5.2 5.6 4.6 4.0 3.5 Green (100 Mesh) (100 Mesh) 40 .15 F F 8.9 7.4 6.4 5.6 5.9 5.0 4.2 3.7 45 .16 F F 9.5 7.9 6.8 5.9 6.3 5.3 4.5 3.9 60 .18 F F 10.9 9.1 7.8 6.8 7.3 6.1 5.2 4.6 30 .17 M F 10.3 8.6 7.4 6.4 6.9 5.7 4.9 4.3 8002VS 11002VS 35 .19 M F 11.1 9.3 7.9 6.9 7.4 6.2 5.3 4.6 Yellow (50 Mesh) (50 Mesh) 40 .20 F F 11.9 9.9 8.5 7.4 7.9 6.6 5.7 5.0 45 .21 F F 12.6 10.5 9.0 7.9 8.4 7.0 6.0 5.3 60 .25 F F 14.6 12.1 10.4 9.1 9.7 8.1 6.9 6.1 30 .26 M F 15.4 12.9 11.0 9.7 10.3 8.6 7.4 6.4 8003VS 11003VS 35 .28 M F 16.7 13.9 11.9 10.4 11.1 9.3 7.9 6.9 Blue (50 Mesh) (50 Mesh) 40 .30 M F 17.8 14.9 12.7 11.1 11.9 9.9 8.5 7.4 45 .32 M F 18.9 15.8 13.5 11.8 12.6 10.5 9.0 7.9 60 .37 F F 22 18.2 15.6 13.6 14.6 12.1 10.4 9.1 30 .35 M M 21 17.2 14.7 12.9 13.7 11.4 9.8 8.6 .37 M M 22 18.5 15.9 13.9 14.8 12.3 10.6 9.3 8004VS 11004VS 35 Red .40 M M 24 19.8 17.0 14.9 15.8 13.2 11.3 9.9 (50 Mesh) (50 Mesh) 40 45 .42 M F 25 21 18.0 15.8 16.8 14.0 12.0 10.5 60 .49 M F 29 24 21 18.2 19.4 16.2 13.9 12.1 30 .43 C M 26 21 18.4 16.1 17.2 14.3 12.3 10.7 .47 M M 28 23 19.8 17.4 18.5 15.4 13.2 11.6 8005VS 11005VS 35 Brown (50 Mesh) (50 Mesh) 40 .50 M M 30 25 21 18.6 19.8 16.5 14.1 12.4 45 .53 M M 32 26 23 19.7 21 17.5 15.0 13.1 60 .61 M F 36 30 26 23 24 20 17.3 15.2 30 .52 C M 31 26 22 19.3 21 17.2 14.7 12.9 8006VS 11006VS 35 .56 C M 33 28 24 21 22 18.5 15.9 13.9 Gray (50 Mesh) (50 Mesh) 40 .60 C M 36 30 25 22 24 19.8 17.0 14.9 45 .64 C M 38 32 27 24 25 21 18.0 15.8 60 .74 C M 44 36 31 27 29 24 21 18.2 30 .69 C C 41 34 29 26 27 23 19.6 17.2 .75 C C 44 37 32 28 30 25 21 18.5 8008VS 11008VS 35 White (50 Mesh) (50 Mesh) 40 .80 C C 48 40 34 30 32 26 23 19.8 45 .85 C M 50 42 36 32 34 28 24 21 60 .98 C M 58 49 42 36 39 32 28 24 F = Fine VF = Very Fine M = Medium C = Coarse VC = Very Coarse - Larger Droplets for Best Drift Control 30

D

8001VS 11001VS 35 (100 Mesh) (100 Mesh) 40

DULTMEIER SALES • OMAHA, NE

(800) 228-9666

www.dultmeier.com

Color-Coded Flat Spray Tips VS Style - Stainless

Flat Spray Tips are a good selection for preemergence surface applied herbicide at minimum pressure of 30 PSI to provide medium size droplets for good soil coverage. Good selection for post emergence contact herbicides at 40 PSI and higher to provide good canopy penetration and small droplets for better foliage coverage. Maximum temperature is 125° F. These flat spray tips have a tapered edge flat spray pattern for uniform coverage in broadcast spraying. Available in Visiflo Color-coded Stainless Steel in 80° spray angles in selected sizes. See Chart for Ordering. WHEN ORDERING SPECIFY TIP No.: Example: 8002VS - Stainless Steel with VisiFlo color-coding COLOR CODED Part No. Visiflo Spray Tips Net Ea. SS TP8001VS thru TP8008VS Stainless $ 3.76 SS TP11001VS thru TP11008VS Stainless 3.75 TeeJet Packaged in 25’s. 10% Quantity Discount on 50+ Of One Size

• DAVENPORT, IA

(800) 553-6975

E0364


Spray Tips & Nozzles

270 TTJ60

Air Induction Turbo TwinJet®

Turbo TwinJet Polymer Flat Spray Tips ®

AITTJ60 with VisiFlo® Color Coding - Tips Only

with VisiFlo® Color Coding

D

Typical Applications: • Best for pre-emerge surface applied herbicides - minimum spray pressure of 15 PSI. • Best for post-emerge contact herbicides - typical pressures of 40 PSI and higher. • Excellent for fungicide application.

SPRAY ANGLE 110˚

Typical Applications: • Excellent for more intensive penetration of thick foliage & achieving high rates of coverage with fungicides, insecticides or contact herbicides. • Two spray patterns spraying 60° apart, one in the forward direction of travel; one in the rear. • Good lateral coverage on vertical target areas. • Sizes available to meet a wide range of speeds & application rates. • Automatic spray alignment with CP25597 Quick TeeJet cap (02-06). • Automatic spray alignment with CP98578 Quick TeeJet cap (08-15).

OPTIMUM SPRAY HEIGHT 20” SPACING 30” SPACING 20” 30”

TTJ60 Nozzle Combo with Tip, Cap & EPDM Gasket

D D

D

Features: • Tip produces dual, tapered edge, wide angle, flat spray pattern for uniform coverage in broadcast spraying.

D

AITTJ60 Nozzle Combo with Tip, Cap & EPDM Gasket

• 60° between leading & trailing spray patterns. • Dual angled spray patterns help to penetrate the crop canopy and provide thorough leaf coverage. • Large, round free passages to minimize clogging. • All acetal construction for excellent chemical and wear resistance. • Larger droplet size than TT Nozzles for improved drift control. • Automatic spray alignment with CP25611 Quick TeeJet cap. • Suggested spray pressure range: 20-90 PSI. TIP COLOR

Liquid Capacity TIP NO. Pressure 1 Nozzle Strainer (GPM) Screen Size in PSI

Yellow

TTJ6011002VP 40 0.20 (100 Mesh) 50 0.22

20 0.14 30 0.17

Violet

Blue

Red

Brown

Gray

White

Light Blue

60 75 90 20 30 TTJ60110025VP 40 50 (100 Mesh) 60 75 90 20 30 40 TTJ6011003VP 50 (100 Mesh) 60 75 90 20 30 40 TTJ6011004VP 50 (100 Mesh) 60 75 90 20 30 40 TTJ6011005VP 50 (100 Mesh) 60 75 90 20 30 TTJ6011006VP 40 (100 Mesh) 50 60 75 90 20 30 TTJ6011008VP 40 (50 Mesh) 50 60 75 90 20 30 TTJ6011010VP 40 (50 Mesh) 50 60 75 90

0.24 0.27 0.30 0.18 0.22 0.25 0.28 0.31 0.34 0.38 0.21 0.26 0.30 0.34 0.37 0.41 0.45 0.28 0.35 0.40 0.45 0.49 0.55 0.60 0.35 0.43 0.50 0.56 0.61 0.68 0.75 0.42 0.52 0.60 0.67 0.73 0.82 0.90 0.57 0.69 0.80 0.89 0.98 1.06 1.20 0.71 0.87 1.00 1.12 1.22 1.32 1.50

GALLON PER ACRE GALLON PER ACRE 20" SPACING 30" SPACING 7 8 6 8 6 5 7 5 MPH MPH MPH MPH MPH MPH MPH MPH C 8.3 6.9 5.9 5.2 5.5 4.6 4.0 3.5 C 10.1 8.4 7.2 6.3 6.7 5.6 4.8 4.2 M 11.9 9.9 8.5 7.4 7.9 6.6 5.7 5.0 M 13.1 10.9 8.9 8.2 8.7 7.3 6.2 5.4 M 14.3 11.9 10.0 8.9 9.5 7.9 6.8 5.9 M 16.0 13.4 11.5 10.0 10.7 8.9 7.6 6.7 M 17.8 14.9 12.7 11.1 11.9 9.9 8.5 7.4 VC 10.7 8.9 7.6 6.7 7.1 5.9 5.1 4.5 C 13.1 10.9 9.3 8.2 8.7 7.3 6.2 5.4 C 14.9 12.4 10.6 9.3 9.9 8.3 7.1 6.2 M 16.6 13.9 11.9 10.4 11.1 9.2 7.9 6.9 M 18.4 15.3 13.2 11.5 12.3 10.2 8.8 7.7 M 20 16.8 14.5 12.6 13.5 11.2 9.6 8.4 M 23 18.8 16.1 14.1 15.0 12.5 10.7 9.4 VC 12.5 10.4 8.9 7.8 8.3 6.9 5.9 5.2 C 15.4 12.9 11.0 9.7 10.3 8.6 7.4 6.4 C 17.8 14.9 12.7 11.1 11.9 9.9 8.5 7.4 M 20 16.8 14.4 12.6 13.5 11.2 9.6 8.4 M 22 18.3 15.7 13.7 14.7 12.2 10.5 9.2 M 24 20 17.4 15.2 16.2 13.5 11.6 10.1 M 27 22 19.1 16.7 17.8 14.9 12.7 11.1 VC 16.6 13.9 11.9 10.4 11.1 9.2 7.9 6.9 C 21 17.3 14.9 13.0 13.9 11.6 9.9 8.7 C 24 19.8 17.0 14.9 15.8 13.2 11.3 9.9 M 27 22 19.1 16.7 17.8 14.9 12.7 11.1 M 29 24 21 18.2 19.4 16.2 13.9 12.1 M 33 27 23 20 22 18.2 15.6 13.6 M 36 30 25 22 24 19.8 17.0 14.9 VC 21 17.3 14.9 13.0 13.9 11.6 9.9 8.7 C 26 21 18.2 16.0 17.0 14.2 12.2 10.6 C 30 25 21 18.6 19.8 16.5 14.1 12.4 C 33 28 24 21 22 18.5 15.8 13.9 M 36 30 26 23 24 20 17.3 15.1 M 40 34 29 25 27 22 19.2 16.8 M 45 37 32 28 30 25 21 18.6 XC 25 21 17.8 15.6 16.6 13.9 11.9 10.4 C 31 26 22 19.3 21 17.2 14.7 12.9 C 36 30 25 22 24 19.8 17.0 14.9 C 40 33 28 25 27 22 19.0 16.6 M 43 36 31 27 29 24 21 18.1 M 49 41 35 30 32 27 23 20 M 53 45 38 33 36 30 25 22 VC 34 28 24 21 23 18.8 16.1 14.1 VC 41 34 29 26 27 23 19.5 17.1 C 48 40 34 30 32 26 23 19.8 C 53 44 38 33 35 29 25 22 C 58 49 42 36 39 32 28 24 C 63 52 47 39 44 36 31 27 M 71 59 51 45 48 40 34 30 XC 42 35 30 26 28 23 20 17.6 VC 52 43 37 32 34 29 25 22 VC 59 50 42 37 40 33 28 25 VC 67 55 48 42 44 37 32 28 C 72 60 52 45 48 40 35 30 C 78 65 58 49 54 45 39 34 C 89 74 64 56 59 50 42 37

Features: • Air Induction with dual 110° flat fan patterns. • 60° between leading & trailing spray patterns. • Good coverage with increased canopy penetration & best drift control. • Best suited for post emergence applications. • Excellent drift control with coarse to very coarse droplets. • Pressure ranges from 20 to 90 PSI.

Drop Size

Tabulation Based on Spraying Water at 70° F. VF=Very Fine • F=Fine • M=Medium • C=Coarse • VC=Very Coarse • XC=Extremely Coarse

Part No. Net Ea. SS TTJ6011002VP thru 11010VP SS TTJ60-11002VP-CE thru 11010VP-CE

Turbo TwinJet Tip Only Use CP25611 Caps & Gasket....... $ 4.74 Nozzle Assembly Includes Tip, Cap and EPDM Gasket................. 5.45

TeeJet Packaged in 25’s. 10% Quantity Discount on 50+ Of One Size

Tabulation Based on Spraying Water at 70° F. F = Fine VF = Very Fine M = Medium C = Coarse VC = Very Coarse XC = Extremely Coarse

Larger Coarse Droplets Provide Best Drift Control Part No. Net Ea.

SS AITTJ11002VP thru 11006VP Turbo TwinJet Tip Only Use CP25597 Caps & Gasket....... $ 4.91 SS AITTJ11008VP thru 110015VP Turbo TwinJet Tip Only Use CP98578 Caps & Gasket....... 5.66 SS AITTJ11002VP-CE thru 11006VP-CE Turbo TwinJet Nozzle Assembly, Includes Tip, Cap & EPDM Gasket.. 5.72 SS AITTJ11008VP-CE thru 110015VP-CE Turbo TwinJet Nozzle Assembly, Includes Tip, Cap & EPDM Gasket.. 6.97 TeeJet Packaged in 25’s. 10% Quantity Discount on 50+ Of One Size

DULTMEIER SALES • OMAHA, NE

(800) 228-9666

www.dultmeier.com

• DAVENPORT, IA

(800) 553-6975

E0605


Spray Tips & Nozzles Turbo

Turbo TeeJet™ Polymer Flat Spray Tips

D

• Tapered edge, wide angle flat pattern for uniform coverage in broadcast spraying. • Large, round free passages to minimize clogging. 110° Spray pattern. • Excellent resistance to corrosive solutions. • Larger droplets for less drift. • Automatic spray alignment with CP25611 Quick TeeJet ® cap. • Use CP114501 Cap for 10 & 12 Sizes.

TT Nozzle Combo with Tip, Cap & EPDM Gasket

TIP COLOR

Orange

Green

Yellow

Violet

Blue

Red

Brown

Grey

White

LT. Blue

Magenta

Induction Tips

TTI Features:

• All acetal construction for excellent chemical and wear resistance. • Removable pre-orifice for fast and easy cleaning. • Large, round passages to minimize plugging. • Tapered flat 110° spray pattern. • Large droplets are produced through a venturi air aspirator resulting in less drift. • Pressure Range: 15-100 PSI. • Use CP25597 Quick TeeJet® cap. • Use CP114501 Cap for 08 & 10 Sizes.

D

D D

GALLON PER ACRE GALLON PER ACRE Liquid Capacity 20" SPACING 30" SPACING TIP NO. 7 8 6 6 8 5 7 Drop Strainer Pressure 1 Nozzle 5 Screen Size in PSI in GPM Size MPH MPH MPH MPH MPH MPH MPH MPH 15 0.061 C 3.6 3.0 2.6 2.3 2.4 2.0 1.7 1.5 20 0.071 C 4.2 3.5 3.0 2.6 2.8 2.3 2.0 1.8 30 0.087 M 5.2 4.3 3.7 3.2 3.4 2.9 2.5 2.2 TT11001VP 40 0.10 M 5.9 5.0 4.2 3.7 4.0 3.3 2.8 2.5 M 6.5 5.4 4.7 4.1 4.4 3.6 3.1 2.7 (100 Mesh) 50 0.11 60 0.12 F 7.1 5.9 5.1 4.5 4.8 4.0 3.4 3.0 75 0.14 F 8.3 6.9 5.9 5.2 5.5 4.6 4.0 3.5 90 0.15 F 8.9 7.4 6.4 5.6 5.9 5.0 4.2 3.7 15 0.09 VC 5.3 4.5 3.8 3.3 3.6 3.0 2.5 2.2 20 0.11 C 6.5 5.4 4.7 4.1 4.4 3.6 3.1 2.7 30 0.13 M 7.7 6.4 5.5 4.8 5.1 4.3 3.7 3.2 TT110015VP 40 0.15 M 8.9 7.4 6.4 5.6 5.9 5.0 4.2 3.7 (100 MESH) 50 0.17 M 10.1 8.4 7.2 6.3 6.7 5.6 4.8 4.2 60 0.18 F 10.7 8.9 7.6 6.7 7.1 5.9 5.1 4.5 75 0.21 F 12.5 10.4 8.9 7.8 8.3 6.9 5.9 5.2 90 0.23 F 13.7 11.4 9.8 8.5 9.1 7.6 6.5 5.7 15 0.12 VC 7.1 5.9 5.1 4.5 4.8 4.0 3.4 3.0 20 0.14 VC 8.3 6.9 5.9 5.2 5.5 4.6 4.0 3.5 30 0.17 C 10.1 8.4 7.2 6.3 6.7 5.6 4.8 4.2 M 11.9 9.9 8.5 7.4 7.9 6.6 5.7 5.0 TT11002VP 40 0.20 M 13.1 10.9 9.3 8.2 8.7 7.3 6.2 5.4 (50 MESH) 50 0.22 60 0.25 M 14.9 12.4 10.6 9.3 9.9 8.3 7.1 6.2 75 0.27 F 16.0 13.4 11.5 10.0 10.7 8.9 7.6 6.7 90 0.30 F 17.8 14.9 12.7 11.1 11.9 9.9 8.5 7.4 15 0.15 VC 8.9 7.4 6.4 5.6 5.9 5.0 4.2 3.7 20 0.18 VC 10.7 8.9 7.6 6.7 7.1 5.9 5.1 4.5 30 0.22 C 13.1 10.9 9.3 8.2 8.7 7.3 6.2 5.4 TT110025VP 40 0.25 M 14.9 12.4 10.6 9.3 9.9 8.3 7.1 6.2 M 16.6 13.9 11.9 10.4 11.1 9.2 7.9 6.9 (50 MESH) 50 0.28 60 0.31 M 18.4 15.3 13.2 11.5 12.3 10.2 8.8 7.7 75 0.34 F 20.0 16.8 14.4 12.6 13.5 11.2 9.6 8.4 90 0.38 F 23.0 18.8 16.1 14.1 15.0 12.5 10.7 9.4 15 0.18 VC 10.7 8.9 7.6 6.7 7.1 5.9 5.1 4.5 20 0.21 VC 12.5 10.4 8.9 7.8 8.3 6.9 5.9 5.2 30 0.26 C 15.4 12.9 11.0 9.7 10.3 8.6 7.4 6.4 TT11003VP 40 0.30 C 17.8 14.9 12.7 11.1 11.9 9.9 8.5 7.4 (50 MESH) 50 0.34 M 20.2 16.8 14.4 12.6 13.5 11.2 9.6 8.4 60 0.37 M 22.0 18.3 15.7 13.7 14.7 12.2 10.5 9.2 75 0.41 M 24.4 20.3 17.4 15.2 16.2 13.5 11.6 10.1 90 0.45 F 26.7 22.3 19.1 16.7 17.8 14.9 12.7 11.1 15 0.24 XC 14.3 11.9 10.2 8.9 9.5 7.9 6.8 5.9 20 0.28 VC 16.6 13.9 11.9 10.4 11.1 9.2 7.9 6.9 30 0.35 C 20.8 17.3 14.9 13.0 13.9 11.6 9.9 8.7 TT11004VP 40 0.40 C 23.8 19.8 17.0 14.9 15.8 13.2 11.3 9.9 M 26.7 22.3 19.1 16.7 17.8 14.9 12.7 11.1 (50 MESH) 50 0.45 60 0.49 M 29.1 24.3 20.8 18.2 19.4 16.2 13.9 12.1 75 0.55 M 32.7 27.2 23.3 20.4 21.8 18.2 15.6 13.6 90 0.60 M 35.6 29.7 25.5 22.3 23.8 19.8 17.0 14.9 15 0.31 XC 18.4 15.3 13.2 11.5 12.3 10.2 8.8 7.7 20 0.35 VC 20.8 17.3 14.9 13.0 13.9 11.6 9.9 8.7 30 0.43 VC 25.5 21.3 18.2 16.0 17.0 14.2 12.2 10.6 C 29.7 24.8 21.2 18.6 19.8 16.5 14.1 12.4 TT11005VP 40 0.50 C 33.3 27.7 23.8 20.8 22.2 18.5 15.8 13.9 (50 MESH) 50 0.56 60 0.61 M 36.2 30.2 25.9 22.6 24.2 20.1 17.3 15.1 75 0.68 M 40.4 33.7 28.9 25.2 26.9 22.4 19.2 16.8 90 0.75 M 44.6 37.1 31.8 27.8 29.7 24.8 21.2 18.6 15 0.37 XC 22.0 18.3 15.7 13.7 14.7 12.2 10.5 9.2 20 0.42 VC 25.0 21.0 17.8 15.6 16.6 13.9 11.9 10.4 30 0.52 VC 31.0 26.0 22.0 19.3 20.6 17.2 14.7 12.9 VC 36.0 30.0 25.0 22.0 23.6 19.8 17.0 14.9 TT11006VP 40 0.60 C 40.0 33.0 28.0 25.0 26.5 22.1 19.0 16.6 (50 MESH) 50 0.67 60 0.73 C 43.0 36.0 31.0 27.0 28.5 24.1 20.5 18.1 75 0.82 C 49.0 41.0 35.0 30.0 32.5 27.1 23.2 20.3 90 0.90 M 53.0 45.0 38.0 33.0 - - - 15 0.49 XC 29.0 24.0 21.0 18.2 19.4 18.2 13.9 12.1 20 0.57 VC 34.0 28.0 24.0 21.0 22.6 18.5 16.1 14.1 30 0.69 VC 41.0 34.0 29.0 26.0 27.3 22.6 19.5 17.1 C 48.0 40.0 34.0 30.0 31.7 26.4 22.6 18.8 TT11008VP 40 0.80 C 53.0 44.0 38.0 33.0 35.2 29.4 25.2 22.0 (50 MESH) 50 0.89 60 0.98 C 58.0 49.0 42.0 36.0 38.8 32.5 27.7 26.3 75 1.10 M 65.0 54.0 47.0 41.0 43.6 36.3 31.1 27.2 90 1.20 M 71.0 59.0 51.0 45.0 - - - 15 0.61 UC 36.0 30.0 26.0 23.0 24.0 20.0 17.3 15.1 20 0.71 XC 42.0 35.0 30.0 26.0 28.0 23.0 20.0 17.6 VC 52.0 43.0 37.0 32.0 34.0 29.0 25.0 22.0 TT11010VP 30 0.87 40 1.00 VC 59.0 50.0 42.0 37.0 40.0 33.0 28.0 25.0 (50 MESH) 50 1.12 C 67.0 55.0 48.0 42.0 44.0 37.0 32.0 28.0 60 1.22 C 72.0 60.0 52.0 45.0 48.0 40.0 35.0 30.0 75 1.37 C 81.0 68.0 58.0 51.0 54.0 45.0 39.0 34.0 90 1.50 M 89.0 74.0 64.0 56.0 59.0 50.0 42.0 37.0 15 0.73 UC 43.0 36.0 - 27.0 - - - 20 0.85 UC 50.0 42.0 - 32.0 - - - 30 1.04 V XC C 62.0 51.0 - 39.0 - - - TT11012VP 40 1.20 VC 71.0 59.0 - 45.0 - - - - (50 MESH) 50 1.34 VC 80.0 66.0 - 50.0 - - - 60 1.47 C 87.0 73.0 - 55.0 - - - 75 - C - - - - - - 90 1.80 C 107 89.0 - 67.0 - - - -

F = Fine VF = Very Fine M = Medium

271

C = Coarse

D

TIP COLOR

Green

Yellow

Violet

Blue

Red

Brown

Gray

White

LT. Blue

Net Ea.

SS TT11001VP thru 11008VP Turbo TeeJet Tip Only. Use with Cap CP25611........ $ 3.95 SS TT11010VP thru 11012VP Turbo TeeJet Tip Only. Use with Cap CP114501xxx. 3.95 SS TT11001-VP-CE thru 11008-VP-CE Nozzle Assembly. Tip, Cap & EPR Gasket. 4.72 SS TT11010-VP-CE thru 11012-VP-CE Nozzle Assembly. Tip, Cap & EPR Gasket. 4.72 TeeJet Packaged in 25’s. 10% Quantity Discount on 50+ Of One Size

DULTMEIER SALES • OMAHA, NE

(800) 228-9666

Liquid Capacity TIP NO. Strainer Pressure 1 Nozzle Screen Size in PSI in GPM

GALLON PER ACRE 20" SPACING 7 8 6 MPH MPH MPH

5 MPH

Drop Size

GALLON PER ACRE 30" SPACING 5 MPH

6 7 MPH MPH

8 MPH

0.09 UC 5.3 4.5 3.8 3.3 3.6 3.0 2.5 2.2 0.11 UC 6.5 5.4 4.7 4.1 4.4 3.6 3.1 2.7 0.13 UC 7.7 6.4 5.5 4.8 5.1 4.3 3.7 3.2 0.15 UC 8.9 7.4 6.4 5.6 5.9 5.0 4.2 3.7 0.17 UC 10.1 8.4 7.2 6.3 6.7 5.6 4.8 4.2 60 0.18 XC 10.7 8.9 7.6 6.7 7.1 5.9 5.1 4.5 80 0.21 XC 12.5 10.4 8.9 7.8 8.3 6.9 5.9 5.2 100 0.24 XC 14.3 11.9 10.2 8.9 9.5 7.9 6.8 5.9 15 0.12 UC 7.1 5.9 5.1 4.5 4.8 4.0 3.4 3.0 20 0.14 UC 8.3 6.9 5.9 5.2 5.5 4.6 4.0 3.5 30 0.17 UC 10.1 8.4 7.2 6.3 6.7 5.6 4.8 4.2 UC 11.9 9.9 8.5 7.4 7.9 6.6 5.7 5.0 TTI11002VP 40 0.20 UC 13.1 10.9 9.3 8.2 8.7 7.3 6.2 5.4 (50 MESH) 50 0.22 60 0.25 UC 14.9 12.4 10.6 9.3 9.9 8.3 7.1 6.2 80 0.28 XC 16.6 13.9 11.9 10.4 11.1 9.2 7.9 6.9 100 0.32 XC 19.0 15.8 13.6 11.9 12.7 10.6 9.1 7.9 15 0.15 UC 8.9 7.4 6.4 5.6 5.9 5.0 4.2 3.7 20 0.18 UC 10.7 8.9 7.6 6.7 7.1 5.9 5.1 4.5 30 0.22 UC 13.1 10.9 9.3 8.2 8.7 7.3 6.2 5.4 TTI110025VP 40 0.25 UC 14.9 12.4 10.6 9.3 9.9 8.3 7.1 6.2 (50 Mesh) 50 0.28 UC 16.6 13.9 11.9 10.4 11.1 9.2 7.9 6.9 60 0.31 UC 18.4 15.3 13.2 11.5 12.3 10.2 8.8 7.7 80 0.35 XC 21.0 17.3 14.9 13.0 13.9 11.6 9.9 8.7 100 0.40 XC 24.0 19.8 17.0 14.9 15.8 13.2 11.3 9.9 15 0.18 UC 10.7 8.9 7.6 6.7 7.1 5.9 5.1 4.5 20 0.21 UC 12.5 10.4 8.9 7.8 8.3 6.9 5.9 5.2 30 0.26 UC 15.4 12.9 11.0 9.7 10.3 8.6 7.4 6.4 TTI11003VP 40 0.30 UC 17.8 14.9 12.7 11.1 11.9 9.9 8.5 7.4 50 0.34 UC 20.2 16.8 14.4 12.6 13.5 11.2 9.6 8.4 (50 MESH) 60 0.37 UC 22.0 18.3 15.7 13.7 14.7 12.2 10.5 9.2 80 0.42 XC 25.0 21.0 17.8 15.6 16.6 13.9 11.9 10.4 100 0.47 XC 28.0 23.0 19.9 17.4 18.6 15.5 13.3 11.6 15 0.24 UC 14.3 11.9 10.2 8.9 9.5 7.9 6.8 5.9 20 0.28 UC 16.6 13.9 11.9 10.4 11.1 9.2 7.9 6.9 30 0.35 UC 20.8 17.3 14.9 13.0 13.9 11.6 9.9 8.7 UC 23.8 19.8 17.0 14.9 15.8 13.2 11.3 9.9 TTI11004VP 40 0.40 UC 26.7 22.3 19.1 16.7 17.8 14.9 12.7 11.1 (50 MESH) 50 0.45 60 0.49 UC 29.1 24.3 20.8 18.2 19.4 16.2 13.9 12.1 80 0.57 XC 34.0 28.0 24.0 21.0 23.0 18.8 16.1 14.1 100 0.63 XC 37.0 31.0 27.0 23.0 25.0 21.0 17.8 15.6 15 0.31 UC 18.4 15.3 13.2 11.5 12.3 10.2 8.8 7.7 20 0.35 UC 20.8 17.3 14.9 13.0 13.9 11.6 9.9 8.7 30 0.43 UC 25.5 21.3 18.2 16.0 17.0 14.2 12.2 10.6 40 0.50 UC 29.7 24.8 21.2 18.6 19.8 16.5 14.1 12.4 TTI11005VP 50 0.56 UC 33.3 27.7 23.8 20.8 22.2 18.5 15.8 13.9 (50 MESH) 60 0.61 UC 36.2 30.2 25.9 22.6 24.2 20.1 17.3 15.1 80 0.71 XC 42.0 35.0 30.0 26.0 28.0 23.0 20.0 17.6 100 0.79 XC 47.0 39.0 34.0 29.0 31.0 26.0 22.0 19.6 15 0.37 UC 22.0 18.3 15.7 13.7 14.7 12.2 10.5 9.2 20 0.42 UC 25.0 21.0 17.8 15.6 16.6 13.9 11.9 10.4 30 0.52 UC 31.0 26.0 22.0 19.3 21.0 17.2 14.7 12.9 TTI11006VP 40 0.60 UC 36.0 30.0 25.0 22.0 24.0 19.8 17.0 14.9 (50 MESH) 50 0.67 UC 40.0 33.0 28.0 25.0 27.0 22.0 19.0 16.6 60 0.73 UC 43.0 36.0 31.0 27.0 29.0 24.0 21.0 18.1 80 0.85 XC - - - - - - - - 100 0.95 XC - - - - - - - - 15 0.49 UC 29.0 24.0 21.0 18.2 19.4 16.2 13.9 12.1 20 0.57 UC 34.0 28.0 24.0 21.0 23.0 18.8 16.1 14.1 30 0.69 UC 41.0 34.0 29.0 26.0 27.0 23.0 19.5 17.1 TTI11008VP 40 0.80 UC 48.0 40.0 34.0 30.0 32.0 26.0 23.0 19.8 (50 MESH) 50 0.89 UC 53.0 44.0 38.0 33.0 35.0 29.0 25.0 22.0 60 0.98 UC 58.0 49.0 42.0 36.0 39.0 32.0 28.0 24.0 80 1.13 XC - - - - - - - 100 1.26 XC - - - - - - - - 15 0.61 UC 36.0 30.0 26.0 23.0 24.0 20.0 17.3 15.1 20 0.71 UC 42.0 35.0 30.0 26.0 28.0 23.0 20.0 17.6 UC 52.0 43.0 37.0 32.0 34.0 29.0 25.0 22.0 TTI11010VP 30 0.87 UC 59.0 50.0 42.0 37.0 40.0 33.0 28.0 25.0 (50 MESH) 40 1.00 50 1.12 UC 67.0 55.0 48.0 42.0 44.0 37.0 32.0 28.0 60 1.22 UC 72.0 60.0 52.0 45.0 48.0 40.0 35.0 30.0 80 1.41 XC - - - - - - - 100 1.58 XC - - - - - - - - 15 20 30

TTI110015VP 40 (100 MESH) 50

M = Medium

VC = Very Coarse XC = Extremely Coarse

Part No.

TTI Nozzle Combo with Tip, Cap & EPDM Gasket

D

C = Coarse

VC = Very Coarse

XC = Extremely Coarse

UC = Ultra Coarse

Part No.

Net Ea.

SS TTI110015VP thru 11006VP Turbo Induction Tip Only. Use with Cap CP25597....... $ 4.43 SS TTI11008VP thru 110010VP Turbo Induction Tip Only. Use with Cap CP114501xxx 8.42 SS TTI110015-VP-CE thru 11006-VP-CE Nozzle Assembly. Tip, Cap & EPR Gasket. 5.16 SS TTI11008-VP-CE thru 110010-VP-CE Nozzle Assembly. Tip, Cap & EPR Gasket. 5.16 TeeJet Packaged in 25’s. 10% Quantity Discount on 50+ Of One Size

www.dultmeier.com

• DAVENPORT, IA

(800) 553-6975

E0372


Air Induction Nozzles

272

Tip No. Liquid Capacity Drop GALLONS PER ACRE 20" SPACING Tip Color Strainer Pressure 1 Nozzle Size 5 6 7 8 9 10 12 14 mph mph mph mph mph mph mph mph Screen Size psi (GPM) 110°

AI80015VS 40 0.15 XC 8.9 7.4 6.4 5.6 5.0 4.5 3.7 3.2 AI110015VS 50 0.17 XC 10.1 8.4 7.2 6.3 5.6 5.0 4.2 3.6 Green AI95015EVS 60 0.18 VC 10.7 8.9 7.6 6.7 5.9 5.3 4.5 3.8 (50 Mesh) 80 0.21 VC 12.5 10.4 8.9 7.8 6.9 6.2 5.2 4.5 100 0.24 C 14.3 11.9 10.2 8.9 7.9 7.1 5.9 5.1 AI8002VS 40 0.20 XC 11.9 9.9 8.5 7.4 6.6 5.9 5.0 4.2 AI11002VS 50 0.22 XC 13.1 10.9 9.3 8.2 7.3 6.5 5.4 4.7 Yellow AI9502EVS 60 0.24 VC 14.3 11.9 10.2 8.9 7.9 7.1 5.9 5.1 (50 Mesh) 80 0.28 VC 16.6 13.9 11.9 10.4 9.2 8.3 6.9 5.9 100 0.32 C 19.0 15.8 13.6 11.9 10.6 9.5 7.9 6.8 AI80025VS 40 .25 XC 14.9 12.4 10.6 9.3 8.3 7.4 6.2 5.3 AI110025VS 50 0.28 XC 16.6 13.9 11.9 10.4 9.2 8.3 6.9 5.9 Lavender AI95025EVS 60 0.31 XC 18.4 15.3 13.2 11.5 10.2 9.2 7.7 6.6 (50 Mesh) 80 0.35 VC 21 17.3 14.9 13.0 11.6 10.4 8.7 7.4 100 0.40 C 24 19.8 17.0 14.9 13.2 11.9 9.9 8.5 AI8003VS 40 0.30 XC 17.8 14.9 12.7 11.1 9.9 8.9 7.4 6.4 AI11003VS 50 0.34 XC 20 16.8 14.4 12.6 11.2 10.1 8.4 7.2 Blue AI9503EVS 60 0.37 XC 22 18.3 15.7 13.7 12.2 11.0 9.2 7.8 (50 Mesh) 100 0.47 C 28 23 19.9 17.4 15.5 14.0 11.6 10.0 AI8004VS 40 0.40 XC 24 19.8 17.0 14.9 13.2 11.9 9.9 8.5 AI11004VS 50 0.45 XC 27 22 19.1 16.7 14.9 13.4 11.1 9.5 Red AI9504EVS 60 0.49 XC 29 24 20.8 18.2 16.2 14.6 12.1 10.4 (50 Mesh) 80 0.57 VC 34 28 24 21.2 18.8 16.9 14.1 12.1 100 0.63 C 37 31 27 23 21 18.7 15.6 13.4 AI8005VS 40 0.50 XC 30 25 21 18.6 16.5 14.9 12.4 10.6 AI11005VS 50 0.56 XC 33 28 24 21 18.5 16.6 13.9 11.9 Brown AI9505EVS 60 0.61 XC 36 30 26 23 20 18.1 15.1 12.9 (50 Mesh) 80 0.71 VC 42 35 30 26 23 21 17.6 15.1 100 0.79 VC 47 39 34 29 26 24 19.6 16.8 AI8006VS 40 0.60 UC 36 30 25 22 19.8 17.8 14.9 12.7 50 0.67 XC 40 33 28 25 22 19.9 16.6 14.2 AI11006VS Gray 60 0.73 XC 43 36 31 27 24 22 18.1 15.5 (50 Mesh) 80 0.85 VC 50 42 36 32 28 25 21 18 100 0.95 VC 56 47 40 35 31 28 24 20 40 0.80 UC 48 40 34 30 26 24 19.8 17 50 0.89 XC 53 44 38 33 29 26 22 18.9 AI11008VS White 60 0.98 XC 58 49 42 36 32 29 24 21 (50 Mesh) 80 1.13 VC 67 56 48 42 37 34 28 24 100 1.26 VC 75 62 53 47 42 37 31 27 40 1.00 UC 59 50 37 30 25 50 1.12 XC 67 55 42 33 28 AI11010VS Lt. Blue 60 1.22 XC 72 60 45 36 30 (50 Mesh) 80 1.41 XC 84 70 52 42 35 100 1.58 VC 94 78 59 47 39 40 1.50 UC 89 74 56 45 37 50 1.68 XC 100 83 62 50 42 AI11015VS Lt. Green 60 1.84 XC 109 91 68 55 46 (50 Mesh) 80 2.12 V XC C 126 105 79 63 52 100 2.37 VC 141 117 88 70 59

Air Induction Nozzles For Reduced Drift These aspirating nozzles will do an excellent job of reducing drift on broadcast applications. Fluid flow pulls air into the nozzle through the air induction ports where it mixes with the spray fluid in a mixing chamber. The result is air filled droplets that are larger than normal, which are less subject to drift. As these drops burst on the target they explode on impact into many small droplets providing good coverage and penetration. Pressure Range is 30 - 115 PSI. For pre emerge herbicides minimum pressure is 40 psi, for posting chemicals use 80 psi or higher.VS Models feature a color coded polymer body with stainless tip insert. VK Models have a ceramic insert. VP Models have a polymer insert. Use with CP25597 quickjet caps. Tapered edge flat spray pattern.

AI110_ _VS Broadcast Flat Spray Nozzles Pattern

AIC TeeJet

Tapered Flat Spray Pattern

20" 110°

15 - 18"

Adjust spray height in the field to overlap minimum 30% of each edge of pattern.

AI950_ _VS Band Spray Nozzles Row Spacing

Tabulation Based on Spraying Water at 70° F. F = Fine VF = Very Fine M = Medium C = Coarse VC = Very Coarse XC = Extremely Coarse UC = Ultra Coarse Larger Droplets for Best Drift Control

Spray Band

D

GPA Conversion Factors*

Std. Part No. Pkg. Net Ea.

SS AI80015VS thru AI8006VS Broadcast Nozzles 25 $ 7.99 SS AI110015VS thru AI11015VS Broadcast Nozzles 25 8.01 SS AI95015EVS thru AI9508EVS Banding Nozzles 25 8.20 SS AIC110025VS thru AIC11010VS Nozzle Cap Assembly with Gasket * 25 8.70 SS AIC110025VK thru AIC11005VK Nozzle Cap Assembly with Gasket * 25 7.07 SS AIC11002VP thru AIC11015VP Nozzle Cap Assembly 25 4.02 * Tip/Cap Combination. TeeJet Packaged in 25’s. 10% Quantity Discount on 50+ Of One Size

95˚

30˚

40˚

8" 4" 3.8 5.0 D

10" 12" 15"

5" 6" 8"

3.0 2.5 2.0

4.0 3.3 2.6

* To find GPA rate on band widths, multiply the tabulated GPA for ROW SPACING by conversion factors.

How Do They All Fit In ‑ From a Droplet Standpoint?

Droplet Size Categories ASABE Standard S-572.1*

* Data extracted from American Society of Agricultural and Biological Engineers (ASABE) Standard S-572.1. Revised March 2009. Classification are subject to change.

DULTMEIER SALES • OMAHA, NE

(800) 228-9666

www.dultmeier.com

• DAVENPORT, IA

(800) 553-6975

E0371


Air Induction Nozzles Features

Air Induction XR Flat Spray Tips

• 110° Wide, tapered flat spray angle with air induction technology offers better drift management.

Extended Range (15 to 90 PSI)

D

TIP COLOR Drop PSI Size

D

D

Capacity Capacity 1 Nozzle 1 Nozzle In GPM In Oz./Min.

D

D

D

FOR TURF GALLONS PER ACRE 20” SPACING 4 MPH 5 MPH

6 MPH

• Made of a two-piece UHMWPE polymer construction with VisiFlo® color coding. UHMPE provides excellent chemical resistance, including acids, as well as exceptional wear life.

D

GALLONS PER 1000 SQ. FT.

8 MPH 10 MPH 12 MPH 15 MPH

20 MPH 2 MPH

273

3 MPH

4 MPH

5 MPH

• Depending on the chemical, produces large air-filled drops through a Venturi air aspirator. • Removable pre-orifice.

GREEN AIXR110015

• Use CP25611 Quick TeeJet® cap. • Use CP11442 Quick TeeJet® cap + Gasket for 08 & 10 sizes.

(100)

YELLOW AIXR11002 (50)

D D

VIOLET AIXR110025

AIXR Nozzle Combo with Tip, Cap & EPDM Gasket

(50)

BLUE AIXR11003 D

(50)

RED AIXR11004 (50)

Spacing

BROWN AIXR11005 Spray Height

(50)

Removable Pre-Orifice

GRAY AIXR11006 (50)

Tip Body

WHITE AIXR11008

Air Inlet

Air Inlet

(50) Exit Orifice

LT. BLUE AIXR11010

AIXR110_ _VP Spray Nozzles (Cross Section View)

(50)

M = Medium

C = Coarse

VC = Very Coarse

XC = Extremely Coarse

UC = Ultra Coarse

Part No. SS AIXR110015VP thru 11010VP SS AIXR110015VP-CE thru 11010VP-CE

Extended Range TeeJet Tip Only. Use CP25611 Cap + Gasket. Also Use CP11442 Cap + Gasket for 08 & 10 Sizes............................... Nozzle Assembly with Tip, Cap and EPDM Gasket.........

20"

Net Ea.

$ 4.36

110°

5.08

TeeJet Packaged in 25’s. 10% Quantity Discount on 50+ Of One Size

DULTMEIER SALES • OMAHA, NE

(800) 228-9666

www.dultmeier.com

20"

Adjust spray height in the field to overlap minimum 30% of each edge of pattern.

• DAVENPORT, IA

CONTACT PRODUCT

SYSTEMIC PRODUCT

DRIFT MANAGEMENT

GOOD

EXCELLENT

EXCELLENT

(800) 553-6975

E0778


Spray Nozzles & Tips

274

Even Flat Spray Tips

1/4" Flexible Drops

For pre-emergence and other types of band spraying Approximate GPA* Spray Height Conversion Band Factors Width 40° 80° 95° 30" Row 40" Row Series Series Series Spacing Spacing

QJ21353 Series for Spraying Systems "QuickJet" Nozzles D D

D

21354 Nylon Drop with standard cap

8" 10" 5" 4" 3.8 5.0 10" 12" 6" 5" 3.0 4.0 12" 14" 7" 6" 2.5 3.3 15" 19" 9" 8" 2.0 2.6 * To find GPA rate on band widths, multiply the tabu lated GPA for ROW SPACING by conversion factors.

D

BRASS and COLOR CODED STAINLESS STEEL DRIFT GUARD

BANDING EXAMPLE: For a Banding Rate of 20 GPA/5 MPH/15" Band, 1 nozzle per band:

Part No. SS QJ21353-15NYB SS QJ21353-24NYB SS 21354-15NYB SS 21354-24NYB

SPRAY BAND

*GPA - Gallons Per Field Acre Liquid Capacity Capacity 3 MPH 4 MPH 5 MPH Pressure 1 Nozzle 1 Nozzle

7 MPH

Strainer in PSI in GPM in oz/min 30" 40" 30" 40" 30" 40" 30" 40" Screen Size Row Row Row Row Row Row Row Row Spacing Spacing Spacing Spacing Spacing Spacing Spacing Spacing

Orange: 8001EVS Brass: 8001E SS4001E Green: 80015EVS 80015E SS40015E DG95015EVS Yellow: 8002EVS 8002E SS4002E DG9502EVS Blue: 8003EVS 8003E SS4003E DG9503EVS Red: 8004EVS 8004E SS4004E DG9504EVS Brown: 8005EVS 8005E SS4005E DG9505EVS Gray: 8006EVS Brass: 8006E (50-Mesh) White: 8008EVS Brass: 8008E (50-Mesh) Brass: 8010E (No Strainer) SS8010E Brass: 8015E (No Strainer) SS8015E

20 30 40 20 30 40 20 30 40 20 30 40 20 30 40 20 30 40 20 30 40 20 30 40 20 30 40 20 30 40

0.07 9 4.7 3.5 3.5 2.6 2.8 2.1 2.0 1.5 0.09 11 5.7 4.3 4.3 3.2 3.4 2.6 2.4 1.8 0.10 13 6.6 5.0 5.0 3.7 4.0 3.0 2.8 2.1 0.11 14 7.0 5.3 5.3 3.9 4.2 3.2 3.0 2.3 0.13 17 8.6 6.4 6.4 4.8 5.1 3.9 3.7 2.8 0.15 19 9.9 7.4 7.4 5.6 5.9 4.5 4.2 3.2 0.14 18 9.3 7.0 7.0 5.3 5.6 4.2 4.0 3.0 0.17 22 11.4 8.6 8.6 6.4 6.9 5.1 4.9 3.7 0.20 26 13.2 9.9 9.9 7.4 7.9 5.9 5.7 4.2 0.21 27 14.0 10.5 10.5 7.9 8.4 6.3 6.0 4.5 0.26 33 17.1 12.9 12.9 9.6 10.3 7.7 7.3 5.5 0.30 38 19.8 14.9 14.9 11.1 11.9 8.9 8.5 6.4 0.28 36 18.7 14.0 14.0 10.5 11.2 8.4 8.0 6.0 0.35 44 22.9 17.1 17.1 12.9 13.7 10.3 9.8 7.3 0.40 51 26.4 19.8 19.8 14.9 15.8 11.9 11.3 8.5 0.35 45 23.3 17.5 17.5 13.1 14.0 10.5 10.0 7.5 0.43 55 28.6 21.4 21.4 16.1 17.1 12.9 12.2 9.2 0.50 64 33.0 24.8 24.8 18.6 19.8 14.9 14.1 10.6 0.42 54 28.0 21.0 21.0 15.8 16.8 12.6 12.0 9.0 0.52 67 34.3 25.7 25.7 19.3 20.6 15.4 14.7 11.0 0.60 77 39.6 29.7 29.7 22.3 23.8 17.8 17.0 12.7 0.57 72 37.6 28.0 28.0 21.0 22.4 16.8 16.0 12.0 0.69 89 45.7 34.3 34.3 25.7 27.4 20.6 19.6 14.7 0.80 102 52.8 39.6 39.6 29.7 31.7 23.8 22.6 17.0 0.71 91 46.9 35.1 35.1 26.4 28.1 21.1 20.1 15.1 0.87 111 57.4 43.1 43.1 32.3 34.5 25.8 24.6 18.5 1.00 128 66.0 49.5 49.5 37.1 39.6 29.7 28.3 21.2 1.06 136 70.0 52.5 52.5 39.4 42.0 31.5 30.0 22.5 1.30 166 85.8 64.4 64.4 48.3 51.5 38.6 36.8 27.6 1.50 192 99.0 74.3 74.3 55.7 59.4 44.6 42.4 31.8

Part No. Even Flat Spray Tips Net Ea. SS 8001E thru 8015E Brass Tips....................... $ 2.55 SS SS4001E thru SS8015E S.S.Tips.................... 7.58 SS TP8001EVS thru TP8008EVS Color Coded Stainless Tips............................ 3.73 SS TP9504EVS and TP9506EVS Color Coded Stainless Tips............................ 3.76 SS DG95015EVS thru DG9505EVS......................... Drift Guard Visa Flo Nozzles.......................... 5.60

20 15006 25 (50 Mesh) 30 40 20 15008 25 (50 Mesh) 30 40 20 15009 25 (50 Mesh) 30 40

.42 15.8 .47 17.6 .52 19.3 .60 22 .57 21 .63 23 .69 26 .80 30 .64 24 .71 26 .78 29 .90 33

Double-Orifice Tips 150˚ Series

D

12.6 10.5 9.0 14.1 11.7 10.1 15.4 12.9 11.0 17.8 14.9 12.7 16.8 14.0 12.0 18.8 15.7 13.4 21 17.2 14.7 24 19.8 17.0 18.9 15.8 13.5 21 17.6 15.1 23 19.3 16.5 27 22 19.1

Part No. Double Orifice Tips Net Ea.

(800) 228-9666

D

D

Single Swivel

Double Swivel

On 50+ Part No. Discount

SS 8600-1/4TNYB Single Swivel SS 8600-2-1/4T Double Swivel

Net Ea.

5% $ 5.09 5% 6.16

Off-Center Flat Spray Tips - for Smaller Capacities D

Part No.

SS 150015 thru 15009 Brass........................................ $ 5.45 SS 150015SS thru 15009SS Stainless......................... 9.51 TeeJet Packaged in 25’s. 10% Quantity Discount on 50+ Of One Size DULTMEIER SALES • OMAHA, NE

- NYLON -

D

“H” = 18” Capacity GPA 1 “W” Nozzle in 3 4 5 6 PSI in GPM inches mph mph mph mph 30 0.17 68 5.0 3.7 3.0 2.5 OC-02 40 0.20 70 5.7 4.2 3.4 2.8 60 0.24 72 6.6 5.0 4.0 3.3 30 0.26 77 6.7 5.0 4.0 3.3 OC-03 40 0.30 80 7.4 5.6 4.5 3.7 60 0.37 82 8.9 6.7 5.4 4.5 30 0.35 91 7.6 5.7 4.6 3.8 OC-04 40 0.40 93 8.5 6.4 5.1 4.3 60 0.49 94 10.3 7.7 6.2 5.2 30 0.52 99 10.4 7.8 6.2 5.2 OC-06 40 0.60 101 11.8 8.8 7.1 5.9 60 0.73 102 14.2 10.6 8.5 7.1 30 0.69 100 13.7 10.2 8.2 6.8 OC-08 40 0.80 102 15.5 11.6 9.3 7.8 60 0.98 104 18.7 14.0 11.2 9.3 30 1.04 102 20 15.1 12.1 10.1 OC-12 40 1.20 104 23 17.1 13.7 11.4 60 1.47 105 28 21 16.6 13.9 30 1.39 132 21 15.6 12.5 10.4 OC-16 40 1.60 138 23 17.2 13.8 11.5 60 1.96 143 27 20 16.3 13.6

TQ150

Double outlet spray tip for directed application of herbicides to row middles

For installation at the end of drop pipes with 1/4" FPT pipe thread. Nozzle bodies hold a set position; are not affected by vibrations. Made of NYLON. Priced below LESS tips, caps and strainers. Maximum Temperature is 125° F. Order “TeeJet” Nozzle parts to complete the swivel as shown.

TeeJet Off-Center Flat Spray Tips are commonly installed in double or single swivel nozzle bodies. Because these bodies are adjustable for angular position, a wide spray swath is easily obtained.

TeeJet Packaged in 25’s. 10% Quantity Discount on 50+ Of One Size

TIP NO. Liquid Capacity GALLONS PER ACRE - 40" SPACING 5 6 7 (Strainer Pressure 1 Nozzle 4 Screen Size) in PSI in GPM MPH MPH MPH MPH 20 .11 3.9 3.2 2.6 2.3 150015 25 .12 4.4 3.5 2.9 2.5 (100 Mesh) 30 .13 4.8 3.9 3.2 2.8 40 .15 5.6 4.5 3.7 3.2 20 .14 5.3 4.2 3.5 3.0 15002 25 .16 5.9 4.7 3.9 3.4 30 .17 6.4 5.1 4.3 3.7 (100 Mesh) 40 .20 7.4 5.9 5.0 4.2 20 .21 7.9 6.3 5.3 4.5 15003 25 .24 8.8 7.0 5.9 5.0 30 .26 9.7 7.7 6.4 5.5 (100 Mesh) 40 .30 11.1 8.9 7.4 6.4 20 .28 10.5 8.4 7.0 6.0 25 .32 11.7 9.4 7.8 6.7 15004 30 .35 12.9 10.3 8.6 7.4 (50 Mesh) 40 .40 14.9 11.9 9.9 8.5 20 .35 13.1 10.5 8.8 7.5 15005 25 .40 14.7 11.7 9.8 8.4 30 .43 16.1 12.9 10.7 9.2 (50 Mesh) 40 .50 18.6 14.9 12.4 10.6

Tube Length INLET Connection Net Ea. Nylon 15" “QuickJet System” $ 6.91 Nylon 24" “QuickJet System” 6.91 Nylon 15" 11/16"-16 Swivel Nut 4.55 Nylon 24" 11/16"-16 Swivel Nut 5.07

Single & Double Swivel Nozzles

Maximum Temperature is 125° F.

Note: Banding rate is “Broadcast Rate Basis” in above formula.

TIP SIZES

INDIVIDUAL DROP PIPES with 1/4" MPT Outlet Connection

ROW SPACING

Solve for GPM = GPA x MPH x W÷N 5940 20 x 5 x 15 5940 = .25 GPM per nozzle Use 8003EVS at 30 PSI

Maximum Temperature is 125° F.

Description Net Ea.

SS OC02 thru OC16 Brass Off-Center Tip.............. $ 6.42 SS OCSS02 thru OCSS16 Stainless Off-Center Tip......... 11.55

www.dultmeier.com

• DAVENPORT, IA

(800) 553-6975

E0365


Solid Stream Nozzles & Flow Regulators Stainless Steel

Flow Regulators

Solid Stream Nozzles

Stainless Flow Regulators are usually mounted behind cultivator shanks for the subsurface application of liquid fertilizers and soil fumigants. They are also used for above-ground streaming applications. Use with the Quick TeeJet CP25607 Caps & 18999EPR Gaskets HOW TO ORDER: Specify

for Fertilizer Injection

Solid Stream Nozzles are the best nozzle for injecting nitrogen fertilizer behind coulter or cultivation devices. They can be used at medium pressure shown or at much higher pressure if used with piston pumps. Select the cap style with separate body and cap if size changes will be frequent. The threaded style is correct for permanent installations.

orifice plate number. Example: 4916-8 = .008"

Note: Always insert Orifice Plate with side marked with number facing the outlet of the nozzle body.

Where Tables are Based on 30" Nozzle Spacing Other Spacing

275

Conversion Factors Based on 30" Spacing

26" 28" 32" 34" 36" 38" 40" 42" 44"

Conversion Factor 1.15 1.07 .94 .88 .83 .79 .75 .71 .68

Other Spacing

8" 10" 12" 14" 16" 18" 22" 24"

Conversion Factors 3.75 3.0 2.5 2.15 18.8 1.67 1.37 1.25

0015 0020 0030 0040

4916-59

Drip-Free Diaphragm Check Valves Valves have 1/4" MPT inlet and 1/4" FPT outlet. Designed for 1/4" spray nozzles to screw right in. They have nylon bodies, EPDM seals and are rated to 300 PSI, 3 GPM.

Model 402CPV03 has a 4 PSI cracking pressure. *5% Quantity Discount Model 402CPV01 has a 8 PSI cracking pressure. on 20 Of One Size or Model 402CPV02 has a 25 PSI cracking pressure. 10% on 100 Assorted Part No. Net Ea. SS SS0001 thru SS0040 Stainless Steel *.................................... $ 6.44 SS H1/4USS0002 thru H1/4USS0060 Stainless *........................ 9.89 TW 402CPV03 Drip-Free Diaphragm Check Valve - 4 PSI *...... 3.90 TW 402CPV01 Drip-Free Diaphragm Check Valve - 8 PSI *...... 3.90 TW 402CPV02 Drip-Free Diaphragm Check Valve - 25 PSI *.... 3.90 TW 4020-3 Check Valve with Cap, 4 psi, red/orange........... 2.40 TW 5860-130 Check Valve with Cap, 8 psi, red....................... 2.44 TW 4020-5 Check Valve with Cap, 25 psi, red/blue.............. 3.21 TW 5860-36 EPDM Diaphragm.............................................. .52 TW 5865-36 Viton® Diaphragm............................................. 1.61 TW 2000-30 Retainer Cap Only............................................. 1.39

GALLONS PER ACRE BASED ON WATER WITH FLOW REGULATORS SPACED AT 30" 3 4 5 6 8 MPH MPH MPH MPH MPH 10 .261 17.2 12.9 10.3 8.6 6.5 20 .369 24.0 18.3 14.6 12.2 9.1 30 .452 30.0 22.0 17.9 14.9 11.2 40 .522 34.0 26.0 21.0 17.2 12.9 10 .286 18.9 14.2 11.3 9.4 7.1 20 .405 27.0 20.0 16.0 13.4 10.0 30 .496 33.0 25.0 20.0 16.4 12.3 40 .573 38.0 28.0 23.0 18.9 14.2 10 .306 20.0 15.1 12.1 10.1 7.6 20 .432 29.0 21.0 17.1 14.3 10.7 30 .530 35.0 26.0 21.0 17.5 13.1 40 .612 40.0 30.0 24.0 20.0 15.1 10 .347 23.0 17.2 13.7 11.5 8.6 20 .491 32.0 24.0 19.4 16.2 12.2 30 .601 40.0 30.0 24.0 19.8 14.9 40 .694 46.0 34.0 27.0 23.0 17.2 10 .385 25.0 19.1 15.2 12.7 9.5 20 .544 36.0 27.0 22.0 18.0 13.5 30 .667 44.0 33.0 26.0 22.0 16.5 40 .770 51.0 38.0 30.0 25.0 19.1 10 .396 26.0 19.6 15.7 13.1 9.8 20 .561 37.0 28.0 22.0 18.5 13.9 30 .687 45.0 34.0 27.0 23.0 17.0 40 .793 52.0 39.0 31.0 26.0 19.6 10 .469 31.0 23.0 18.6 15.5 11.6 20 .664 44.0 33.0 26.0 22.0 16.4 30 .813 54.0 40.0 32.0 27.0 20.0 40 .939 62.0 46.0 37.0 31.0 23.0 10 .490 32.0 24.0 19.4 16.2 12.1 20 .693 46.0 34.0 27.0 23.0 17.2 30 .849 56.0 42.0 34.0 28.0 21.0 40 .980 65.0 49.0 39.0 32.0 24.0 10 .572 38.0 28.0 23.0 18.9 14.2 20 .808 53.0 40.0 32.0 27.0 20.0 30 .990 65.0 49.0 39.0 33.0 25.0 40 1.14 75.0 56.0 45.0 38.0 28.0 10 .625 41.0 31.0 25.0 21.0 15.5 20 .883 58.0 44.0 35.0 29.0 22.0 30 1.08 71.0 53.0 43.0 36.0 27.0 40 1.25 83.0 62.0 50.0 41.0 31.0 10 .735 49.0 36.0 29.0 24.0 18.2 20 1.04 69.0 51.0 41.0 34.0 26.0 30 1.27 84.0 63.0 50.0 42.0 31.0 40 1.47 97.0 73.0 58.0 49.0 36.0 10 .776 51.0 38.0 31.0 26.0 19.2 20 1.10 73.0 54.0 44.0 36.0 27.0 30 1.34 88.0 66.0 53.0 44.0 33.0 40 1.55 102.0 77.0 61.0 51.0 38.0 10 .894 59.0 44.0 35.0 30.0 22.0 20 1.26 83.0 62.0 50.0 42.0 31.0 30 1.55 102.0 77.0 61.0 51.0 38.0 40 1.79 118.0 89.0 71.0 59.0 44.0 10 1.27 84.0 63.0 50.0 42.0 31.0 20 1.79 118.0 89.0 71.0 59.0 44.0 30 2.19 145.0 108.0 87.0 72.0 54.0 40 2.53 167.0 125.0 100.0 83.0 63.0

ORIFICE PLATE NO. PRESSURE IN PSI CAPACITY IN GPM

4916-65 4916-68 4916-70 4916-75 4916-78 4916-80 4916-86 4916-89

4916-40

4916-35

4916-29

4916-24

4916-18

ORIFICE PLATE NO. PRESSURE IN PSI CAPACITY IN GPM

402CPV

Check Valve

.021 .029 .036 .042 .037 .053 .064 .074 .054 .076 .093 .107 .078 .111 .136 .157 .102 .144 .177 .204 .115 .163 .199 .230 .135 .191 .233 .269 .147 .208 .255 .294 .165 .233 .285 .329 .167 .237 .290 .335 .188 .266 .326 .376 .200 .283 .346 .400 .216 .306 .375 .433 .245 .346 .424 .490

4916-95

0010

10 20 30 40 10 20 30 40 10 20 30 40 10 20 30 40 10 20 30 40 10 20 30 40 10 20 30 40 10 20 30 40 10 20 30 40 10 20 30 40 10 20 30 40 10 20 30 40 10 20 30 40 10 20 30 40

GALLONS PER ACRE BASED ON WATER WITH FLOW REGULATORS SPACED AT 30" 8 3 4 5 6 MPH MPH MPH MPH MPH 1.4 1.0 .83 .69 .52 1.9 1.4 1.1 .96 .72 2.4 1.8 1.4 1.2 .89 2.8 2.1 1.7 1.4 1.0 2.4 1.8 1.5 1.2 .92 3.5 2.6 2.1 1.7 1.3 4.2 3.2 2.5 2.1 1.6 4.9 3.7 2.9 2.4 1.8 3.6 2.7 2.1 1.8 1.3 5.0 3.8 3.0 2.5 1.9 6.1 4.6 3.7 3.1 2.3 7.1 5.3 4.2 3.5 2.6 5.1 3.9 3.1 2.6 1.9 7.3 5.5 4.4 3.7 2.7 9.0 6.7 5.4 4.5 3.4 10.4 7.8 6.2 5.2 3.9 6.7 5.0 4.0 3.4 2.5 9.5 7.1 5.7 4.8 3.6 11.7 8.8 7.0 5.8 4.4 13.5 10.1 8.1 6.7 5.0 7.6 5.7 4.6 3.8 2.8 10.8 8.1 6.5 5.4 4.0 13.1 9.9 7.9 6.6 4.9 15.2 11.4 9.1 7.6 5.7 8.9 6.7 5.3 4.5 3.3 12.6 9.5 7.6 6.3 4.7 15.4 11.5 9.2 7.7 5.8 17.8 13.3 10.7 8.9 6.7 9.7 7.3 5.8 4.9 3.6 13.7 10.3 8.2 6.9 5.1 16.8 12.6 10.1 8.4 6.3 19.4 14.6 11.6 9.7 7.3 10.9 8.2 6.5 5.4 4.1 15.4 11.5 9.2 7.7 5.8 18.8 14.1 11.3 9.4 7.1 21.7 16.3 13.0 10.9 8.1 11.0 8.3 6.6 5.5 4.1 15.6 11.7 9.4 7.8 5.9 19.1 14.4 11.5 9.6 7.2 22.0 16.6 13.3 11.1 8.3 12.4 9.3 7.4 6.2 4.7 17.6 13.2 10.5 8.8 6.6 22.0 16.1 12.9 10.8 8.1 25.0 18.6 14.9 12.4 9.3 13.2 9.9 7.9 6.6 5.0 18.7 14.0 11.2 9.3 7.0 23.0 17.1 13.7 11.4 8.6 26.0 19.8 15.8 13.2 9.9 14.3 10.7 8.6 7.1 5.3 20.0 15.1 12.1 10.1 7.6 25.0 18.6 14.9 12.4 9.3 29.0 21.0 17.1 14.3 10.7 16.2 12.1 9.7 8.1 6.1 23.0 17.1 13.7 11.4 8.6 28.0 21.0 16.8 14.0 10.5 32.0 24.0 19.4 16.2 12.1

4916-98

0008

4916-43

0006

4916-46

0005

4916-49

0004

4916-51

0003

4916-52

0002

15 .06 2.4 2.0 1.7 1.5 20 .07 2.8 2.3 2.0 1.8 30 .09 3.4 2.9 2.5 2.1 40 .10 4.0 3.3 2.8 2.5 60 .17 4.9 4.0 3.5 3.0 15 .09 3.6 3.0 2.6 2.3 20 .11 4.7 3.5 3.0 2.6 30 .13 5.1 4.3 3.7 3.2 40 .15 5.9 5.0 4.7 3.7 60 .18 7.3 6.1 5.2 4.6 15 .12 4.8 4.0 3.5 3.0 20 .14 5.6 4.7 4.0 3.5 30 .17 6.9 5.7 4.9 4.3 Solid Stream 40 .20 7.9 6.6 5.7 5.0 60 .25 9.7 8.1 6.9 6.1 Nozzle 15 .18 7.3 6.1 5.2 4.5 20 .21 8.4 7.0 6.0 5.3 30 .26 10.3 8.6 7.4 6.4 40 .30 11.9 9.9 8.5 7.4 60 .37 14.6 12.1 10.4 9.1 D 15 .24 9.7 8.1 6.9 6.1 20 .28 11.2 9.3 8.0 7.0 30 .35 13.7 11.4 9.8 8.6 40 .40 15.8 13.2 11.3 9.9 60 .49 19.4 16.2 13.9 12.1 15 .31 12.1 10.1 8.7 7.6 20 .35 14.0 11.7 10.0 8.8 30 .43 17.2 14.3 12.3 10.7 40 .50 19.8 16.5 14.1 12.4 60 .61 24 20 17.3 15.2 15 .37 14.5 12.1 10.4 9.1 H1/4USS Series 20 .42 16.8 14.0 12.0 10.5 Has 1/4" MPT conn. 30 .52 21 17.2 14.7 12.9 40 .60 24 19.8 17.0 14.9 60 .74 29 24 21 18.2 15 .49 19.4 16.2 13.9 12.1 20 .57 22 18.7 16.0 14.0 30 .69 27 23 19.6 17.2 D 40 .80 32 26 23 19.8 60 .98 39 32 28 24 15 .61 24 20 17.3 15.2 20 .71 28 23 20 17.5 30 .87 34 29 25 21 40 1.00 40 33 28 25 60 1.23 49 40 35 30 SS0001 thru SS0008 15 .97 36 30 26 23 Use CP25607 Cap 20 1.06 42 35 30 26 30 1.30 51 43 37 32 40 1.50 59 50 42 37 60 1.84 173 61 52 45 15 1.22 48 40 35 30 20 1.41 56 47 40 35 30 1.73 69 57 49 43 40 2.0 79 66 57 49 60 2.45 97 81 69 61 15 1.84 73 61 52 45 20 2.12 84 70 60 53 30 2.6 103 86 73 64 40 3.0 119 99 85 74 60 3.67 145 121 104 91 15 2.45 97 81 69 61 20 2.83 112 93 80 70 D 30 3.46 137 114 98 86 40 4.0 158 132 113 99 60 4.90 194 162 139 121

4916-55

00015

5 mph

Gallons Per Acre 30" Spacing 6 7 8 mph mph mph

4916-57

0001

Liquid Capacity Pressure 1 Nozzle in psi in GPM

4916-63

Orifice Size

D

4916-140 4916-120 4916-110 4916-107

For 28% nitrogen use a conversion factor of 1.13 For 32% nitrogen use a conversion factor of 1.15

Part No.

Stainless Steel Flow Regulator

Std. Pkg.

SS 4916-18

thru 4916-140

100

Std.Pkg. DISCOUNT Net Ea.

10%

$ 1.87

Viton® is a registered trademark of DuPont Performance Elastomers

DULTMEIER SALES • OMAHA, NE

(800) 228-9666

www.dultmeier.com

• DAVENPORT, IA

(800) 553-6975

E0362


Spray Nozzles

276

SJ7 Solid Stream Spray Tips

SJ3 Solid Stream Spray Tips

D D

D

D

D

D D

D

The SJ3 StreamJet Spray Tip is designed to accurately apply liquid fertilizer at evenly spaced intervals. Its design uses a metering orifice with a deflector to ensure an equal flow rate in each of the liquid streams throughout a wide range of operating pressures. Distributes 3 solid streams. • VisiFlo® color-coding system. • 3 solid streams of equal velocity and capacity. • Removable metering orifice for easy cleaning. • Nine sizes for a wide range of application rates. • Use with CP25597 Quick TeeJet® caps. • All acetal construction for excellent chemical resistance. • Recommended operating pressure: 20-60 PSI • Uniform distribution at 20" height and 20" spacing.

D

D

D

D

The SJ7 StreamJet Spray Tip is designed to accurately apply liquid fertilizer at evenly spaced intervals. Its design uses a metering orifice with a deflector to ensure an equal flow rate in each of the liquid streams throughout a wide range of operating pressures. Distributes 7 solid streams and includes integral Quick Jet Cap & gasket. • VisiFlo® color-coding system. • 7 solid streams of equal velocity and capacity. • Includes integral Quick Jet Cap and gasket. 50854-NYB • Removable metering orifice for Extension easy cleaning. Adapter (optional) • Nine sizes for a wide range of application rates. • All acetal construction for excellent chemical resistance. • Recommended operating pressure: 20-60 PSI

Tip No. Liquid Capacity GPA - 20" Tip Spacing Tip Color (Strainer Pressure 1 Nozzle 4 5 6 8 10 VisiFlo Mesh Size) (psi) (GPM) mph mph mph mph mph 20 0.11 8.2 6.5 5.4 4.1 3.3 GREEN SJ3015VP 30 0.13 9.7 7.7 6.4 4.8 3.9 (100) 40 0.15 11.1 8.9 7.4 5.6 4.5 60 0.17 12.6 10.1 8.4 6.3 5.0 20 0.14 10.4 8.3 6.9 5.2 4.2 YELLOW SJ302VP 30 0.17 12.6 10.1 8.4 6.3 5.0 (50) 40 0.20 14.9 11.9 9.9 7.4 5.9 60 0.22 16.3 13.1 10.9 8.2 6.5 20 0.24 17.8 14.3 11.9 8.9 7.1 BLUE SJ303VP 30 0.27 20 16.0 13.4 10.0 8.0 (50) 40 0.30 22 17.8 14.9 11.1 8.9 60 0.35 26 21 17.3 13.0 10.4 20 0.30 22 17.8 14.9 11.1 8.9 RED SJ304VP 30 0.36 27 21 17.8 13.4 10.7 (50) 40 0.40 30 24 19.8 14.9 11.9 60 0.47 35 28 23 17.4 14.0 20 0.36 27 21 17.8 13.4 10.7 BROWN SJ305VP 30 0.45 33 27 22 16.7 13.4 (50) 40 0.50 37 30 25 18.6 14.9 60 0.59 44 35 29 22 17.5 20 0.42 31 25 21 15.6 12.5 GRAY SJ306VP 30 0.54 40 32 27 20 16.0 (50) 40 0.60 45 36 30 22 17.8 60 0.70 52 42 35 26 21 20 0.56 42 33 28 21 16.6 WHITE SJ308VP 30 0.72 53 43 36 27 21 40 0.80 59 48 40 30 24 60 0.94 70 56 47 35 28 20 0.65 48 39 32 24 19.3 LIGHT SJ310VP 30 0.90 67 53 45 33 27 BLUE 40 1.00 74 59 50 37 30 60 1.19 88 71 59 44 35 20 0.99 74 59 49 37 29 LIGHT SJ3-15-VP 30 1.24 92 74 61 46 37 GREEN 40 1.50 111 89 74 56 45 60 1.83 136 109 91 68 54 20 1.41 105 84 70 52 42 Black SJ3-20-VP 30 1.75 130 104 87 65 52 40 2.00 149 119 99 74 59 60 2.49 185 148 123 92 74

Tip No. Liquid Capacity GPA - 20" Tip Spacing Tip Color (Strainer Pressure 1 Nozzle 4 5 6 8 10 VisiFlo Mesh Size) (psi) (GPM) mph mph mph mph mph 20 0.10 7.4 5.9 5.0 3.7 3.0 GREEN SJ7015VP 30 0.12 8.9 7.1 5.9 4.5 3.6 (100) 40 0.15 11.1 8.9 7.4 5.6 4.5 60 0.18 13.4 10.7 8.9 6.7 5.3 20 0.14 10.4 8.3 6.9 5.2 4.2 YELLOW SJ702VP 30 0.17 12.6 10.1 8.4 6.3 5.0 (50) 40 0.20 14.9 11.9 9.9 7.4 5.9 60 0.25 18.6 14.9 12.4 9.3 7.4 20 0.22 16.3 13.1 10.9 8.2 6.5 BLUE SJ703VP 30 0.27 20 16.0 13.4 10.0 8.0 (50) 40 0.30 22 17.8 14.9 11.1 8.9 60 0.35 26 21 17.3 13.0 10.4 20 0.30 22 17.8 14.9 11.1 8.9 RED SJ704VP 30 0.35 26 21 17.3 13.0 10.4 (50) 40 0.40 30 24 19.8 14.9 11.9 60 0.46 34 27 23 17.1 13.7 20 0.38 28 23 18.8 14.1 11.3 BROWN SJ705VP 30 0.45 33 27 22 16.7 13.4 (50) 40 0.50 37 30 25 18.6 14.9 60 0.58 43 34 29 22 17.2 20 0.45 33 27 22 16.7 13.4 GRAY SJ706VP 30 0.54 40 32 27 20 16.0 (50) 40 0.60 45 36 30 22 17.8 60 0.70 52 42 35 26 21 20 0.57 42 34 28 21 16.9 WHITE SJ708VP 30 0.72 53 43 36 27 21 40 0.80 59 48 40 30 24 60 0.93 69 55 46 35 28 20 0.71 53 42 35 26 21 LIGHT SJ710VP 30 0.90 67 53 45 33 27 BLUE 40 1.00 74 59 50 37 30 60 1.16 86 69 57 43 34 20 1.03 76 61 51 38 31 LIGHT SJ7-15-VP 30 1.29 96 77 64 48 38 GREEN 40 1.50 111 89 74 56 45 60 1.76 131 105 87 65 52

Part No. SS SJ7015VP thru SJ720VP SS 50854NYB

Description Net Ea. StreamJet Nozzle......... $ 6.84 Extension Adapter........ 2.33 TeeJet Packaged in 25’s. 10% Quantity Discount on 50+ Of One Size

Part No. SS SJ3015VP thru SJ320VP

Description Net Ea. StreamJet Nozzle......... $ 5.36 TeeJet Packaged in 25’s. 10% Quantity Discount on 50+ Of One Size

DULTMEIER SALES • OMAHA, NE

D

(800) 228-9666

www.dultmeier.com

• DAVENPORT, IA

(800) 553-6975

E0667


Spray Tips

277 Spray Tips

Drift Guard Flat Spray Tips D

80˚ & 110˚

D

Reduce the volume of driftable droplets under 200 microns up to 65%.

Drift Reducing Features: Utilized pre-orifice technology pioneered by Spraying Systems Co.

Durable stainless steel orifice for added wear life

DG TeeJet® Drift Guard technology uses

Available in both 80˚ and 110˚ spray angles in capacities from 015 to 05

the successful and exclusive XR TeeJet® design platform Precision molded polymer pre-orifice

TIP NO. (Strainer Screen Size)

Superior spray pattern for optimum coverage

DG80015VS 35 0.14 M M 10.4 8.3 6.9 5.9 5.2 4.2 3.5 3.0 DG110015VS 40 0.15 M F 11.1 8.9 7.4 6.4 5.6 4.5 3.7 3.2 10.0 8.3 7.1 6.2 5.0 4.2 3.6 (100 Mesh) 50 0.17 M F 12.5

60 0.18 F F 13.6 10.9 9.1 7.8 6.8 5.5 4.6 3.9 30 0.17 M M 12.9 10.3 8.6 7.4 6.4 5.1 4.3 3.7 35 0.19 M M 13.9 11.1 9.3 7.9 7.0 5.6 4.6 4.0 DG8002VS YELLOW DG11002VS 40 0.20 M M 14.9 11.9 9.9 8.5 7.4 5.9 5.0 4.2 50 0.23 M M 16.6 13.3 11.1 9.5 8.3 6.6 5.5 4.7 (50 Mesh) 60 0.25 M M 18.2 14.6 12.1 10.4 9.1 7.3 6.1 5.2 30 0.26 C C 19.0 15.4 12.9 11.0 9.7 7.7 6.4 5.5 DG8003VS 35 0.28 M M 21 16.7 13.9 11.9 10.4 8.3 7.0 6.0 BLUE M 22 17.8 14.9 12.7 11.1 8.9 7.4 6.4 DG11003VS 40 0.30 M 50 0.34 M M 25 19.9 16.6 14.2 12.5 10.0 8.3 7.1 (50 Mesh) 60 0.37 M M 27 22 18.2 15.6 13.6 10.9 9.1 7.8 30 0.35 C C 26 21 17.2 14.7 12.9 10.3 8.6 7.4 DG8004VS 35 0.37 C C 28 22 18.5 15.9 13.9 11.1 9.3 7.9 RED 30 24 19.8 17.0 14.9 11.9 9.9 8.5 DG11004VS 40 0.40 C M 50 0.45 M M 33 27 22 19.0 16.6 13.3 11.1 9.5 (50 Mesh) 60 0.49 M M 36 29 24 21 18.2 14.6 12.1 10.4 30 0.43 C C 32 26 21 18.4 16.1 13.0 10.5 9.2 DG8005VS 35 0.47 C C 35 28 23 20 17.4 14.0 11.6 10.0 BROWN DG11005VS 40 0.50 C C 37 30 25 21 18.6 15.0 12.5 10.5 50 0.56 M M 42 33 28 24 21 16.6 13.9 11.9 (50 Mesh) 60 0.61 M M 46 36 30 26 23 18.0 15.0 13.0 M = Medium C = Coarse F = Fine - Larger Droplets for Best Drift Control

Nozzle Spacing 20" 30" 40"

Spray Height 20" Spacing 17 - 19" 15 - 18"

Tip Color

TIP NO. (Strainer Screen Size)

RED

TF-VP2 TF-VS2 (50 Mesh)

BROWN

TF-VP2.5 TF-VS2.5 (50 Mesh)

GRAY

TF-VP3 TF-VS3 (50 Mesh)

WHITE

TF-VP4 TF-VS4

L. BLUE

TF-VP5 TF-VS5

L. GREEN

TF-VP7.5 TF-VS7.5

BLACK

TF-VP10 TF-VS10

Removable Pre-Orifice Tip Insert

• Provides easy changeover from high capacity to lower capacity nozzles. • Adapter fits standard 3/4" quick connect Cam-Loc holders. • Corrosion-resistant S.S. and polypropylene construction. • Rated up to 100 PSI. CP1325SS Cap

Tip Insert Holder

Drift Guard

(Cross Section)

TFVS Turbo FloodJet Spray Tip

DG TeeJet® Drift Guard Flat Spray Tips

D

SS DG80015VS thru SS DG8005VS DG110015VS thru DG11005VS Net Ea. $ 5.82 TeeJet Packaged in 25’s. 10% Quantity Discount on 50+ Of One Size

QCT Cam-Loc Adapter

DULTMEIER SALES • OMAHA, NE

Net Ea. $ 12.10

(800) 228-9666

120°

Liquid Capacity Pressure 1 Nozzle in psi in GPM

10 20 30 40 10 20 30 40 10 20 30 40 10 20 30 40 10 20 30 40 10 20 30 40 10 20 30 40

.20 .28 .35 .40 .25 .35 .43 .50 .30 .42 .52 .60 .40 .57 .69 .80 .50 .71 .87 1.0 .75 1.1 1.3 1.5 1.0 1.4 1.7 2.0

Gallons Per Acre Gallons Per Acre 30" Spacing 40" Spacing 5 6 7 8 5 6 7 8 mph mph mph mph mph mph mph mph UC 7.9 6.7 5.6 4.9 5.9 5.0 4.2 3.7 XC 11.2 9.3 8.0 7.1 8.4 7.0 6.0 5.3 XC 13.7 11.4 9.7 8.5 10.3 8.6 7.3 6.4 VC 15.8 13.2 11.3 9.9 11.9 9.9 8.5 7.4 UC 9.9 8.3 7.1 5.7 7.4 6.2 5.3 4.6 UC 14.0 11.7 10.0 8.8 10.5 8.8 7.5 6.6 XC 17.2 14.3 12.3 10.7 12.9 10.7 9.2 8.0 XC 19.8 16.5 14.1 12.4 14.9 12.4 10.6 9.3 UC 11.9 9.9 8.5 7.4 8.9 7.4 6.4 5.6 UC 16.8 14.0 12.0 10.5 12.6 10.5 9.0 7.9 XC 21 17.2 14.7 12.9 15.4 12.9 11.0 9.7 XC 24 19.8 17.0 14.9 17.8 14.9 12.7 11.1 UC 15.9 13.2 11.3 9.9 11.9 9.9 8.5 7.4 UC 22 18.7 16.0 14.0 16.8 14.0 12.0 10.5 XC 28 23 19.6 17.2 21 17.2 14.7 12.9 XC 32 26 23 19.8 24 19.8 17.0 14.9 UC 19.9 16.5 14.1 12.4 14.9 12.4 10.6 9.3 UC 28 23 20 17.5 21 17.5 15.0 13.1 UC 35 28 25 22 26 21 18.4 16.1 XC 40 33 28 25 30 25 21 18.6 UC 29 25 21 18.5 22 18.6 15.9 13.9 UC 43 35 31 26 32 26 23 19.7 UC 52 43 37 32 39 32 28 24 XC 59 50 42 37 45 37 32 28 UC 40 33 28 25 30 25 21 18.6 UC 56 47 40 35 42 35 30 26 UC 68 57 49 43 51 43 37 32 XC 79 66 57 50 59 50 42 37

Drop Size

Part No. TF Color Coded Tips SS TFVP2 thru TFVP10 SS TFVS2 thru TFVS10

Net Ea. $ 1.77 7.94

TeeJet Packaged in 25’s. 10% Quantity Discount on 50+ Of One Size

Full Cone Spray Tips Provides coarse spray with full cone pattern.

D

80°

Part No. Net Ea. SS TG1 - TG10 Brass Full Cone Tips $ 5.45 SS TGSS1 - TGSS10 Stainless Full Cone Tips 12.10

SS QCT Cam-Loc Adapter

Spray Height * Adjust spray height in the field to overlap approximately 30% of each edge of pattern

GALLONS PER ACRE Liquid Capacity 48" Row Spacing Tip Pressure 1 Nozzle 2 2.5 3 4 5 Number In PSI in GPM MPH MPH MPH MPH MPH 20 0.14 26 21 17.3 13.0 10.4 30 0.16 30 24 19.8 14.9 11.9 TG-1 40 0.19 35 28 24 17.6 14.1 60 0.23 43 34 29 21 17.1 20 0.28 52 42 35 26 21 30 0.33 61 49 41 31 25 TG-2 40 0.38 71 56 47 35 28 60 0.46 85 68 57 43 34 20 0.41 76 61 51 38 30 30 0.50 93 74 62 46 37 TG-3 40 0.57 106 85 71 53 42 60 0.68 126 101 84 63 51 20 0.55 102 82 68 51 41 30 0.66 123 98 82 61 49 TG-4 40 0.76 141 113 94 71 56 60 0.91 169 135 113 85 68 20 0.69 128 102 85 64 51 30 0.84 156 125 104 78 62 TG-5 40 1.00 186 149 124 93 74 60 1.16 215 172 144 108 86 20 0.82 152 122 101 76 61 30 0.99 184 147 123 92 74 TG-6 40 1.14 212 169 141 106 85 60 1.37 254 203 170 127 102 20 1.10 204 163 136 102 82 30 1.33 247 198 165 123 99 TG-8 40 1.51 280 224 187 140 112 60 1.82 338 270 225 169 135

QCT Cam-Loc Adapter

Precision molded pre-orifice reduces liquid velocity creating larger droplets to significantly reduce drift. Pre-orifice is easily removed for any necessary cleaning operations.

Spray Height 14 - 16" 15 - 17" 18 - 20"

UC = Ultra Coarse VC = Very Coarse XC = Extremely Coarse Larger Droplets for Best Drift Control

Suggested Minimum Spray Height*

* Adjust spray height in the field to overlap approximately 30% of each edge of pattern.

Spacing

Suggested Minimum Spray Height*

Gallons Per Acre Liquid Capacity Drop 20" Spacing Size Pressure 1 Nozzle 4 5 6 7 8 10 12 14 in psi in GPM 80° 110° mph mph mph mph mph mph mph mph

Spray Angle 80˚ 110˚

TFVS

Soil Incorporated Herbicides – Use at lower pressures (10-25 psi) to produce larger droplets for reduced drift. Mount on 30 - 40" spacings. Pre-Emerge Herbicides – Use at 10 - 25 psi to reduce drift and provide uniform coverage. Also good for broadcast application of liquid fertilizers. Post-Emerge Systemic Herbicides – Use at 20 - 30 psi to control drift. Provides uniform coverage along spray boom. 30" spacings are suggested for post-emerge applications.

30 0.13 M M 9.7 7.7 6.4 5.5 4.8 3.9 3.2 2.8

GREEN

D

Typical Applications:

Each capacity Drift Guard tip is matched with a specific size pre-orifice to create an unsurpassed spray pattern. By using the latest in laser technology, drop size characteristics such as diameter averages and velocity profiles are analyzed to conform to the highest world standards.

Tip Color

TFVS: Color coded stainless tips. TFVP: All polymer, color coded. • Excellent spray distribution for uniform coverage along the boom. • Nozzle design incorporates a pre-orifice to produce larger droplets for less drift. • Large, round orifice reduces clogging. • Stainless steel with VisiFlo® color-coding band for easy size identification. D • Can be used with #CP25599 – NY Quick TeeJet® cap for automatic alignment. TFVP

Also Available in 1.5, 2.5, 3.5 & 6.5.

TeeJet Packaged in 25’s. 10% Quantity Discount on 50+ Of One Size •

www.dultmeier.com

• DAVENPORT, IA

(800) 553-6975

E0366


FloodJet & FieldJet Nozzles

278

FloodJet Tips and Nozzles produce a very wide deflector type flat spray pattern. Round orifice minimizes clogging. There is no standard spray height for FloodJets. Raise or lower spray boom, or rotate nozzle bodies to double overlap spray patterns and provide optimum coverage along spray boom. Nozzle height must be adjusted with field tests. Pattern angle ranges from 110° to 150° and varies with nozzle size and pressure. “TKSS” Series are all Stainless Steel. “TKVS” Series are Color Coded Nylon with Stainless Steel inserts. “1/4KSS & 3/4KSS” are all Stainless Steel and threaded.

D

TKSS1

100 mesh

“Turbo FloodJet Nozzles” standard features include: • Unique orifice design that produces larger droplets for reduced drift and clogging • Precise spray distribution for dramatic improvement in pattern uniformity • Stainless steel construction with color-coding for identification • Grooved side molding for automatic alignment with any quick-connect coupler • Requires only 30% overlap, enabling the use of fewer, larger nozzles.

TKSS1.5 50 mesh

TKVS2 Red 50 mesh

TKVS2.5 Brown 50 mesh

*Adjust spray height in the field to a minimum overlap approximately 30% of each edge of pattern.

Nozzle can be mounted between 0˚ and 45˚

D

D

Nozzle Spacing 40" 60" 120"

Nozzle No.

Capacity 1 Nozzle in GPM

10 MPH

GALLON PER ACRE 40" SPACING 14 16 12 MPH MPH MPH

QCTFVS15

10 20 30

1.5 22 18.6 15.9 13.9 2.1 32 26 23 19.7 2.6 39 32 28 24

10 20 30

2.0 30 25 21 18.6 2.8 42 35 30 26 3.5 51 43 37 32

10 20 30

3.0 45 37 32 28 4.2 63 53 45 39 5.2 77 64 55 48

White

QCTFVS20

Yellow

QCTFVS30

Red

QCTFVS40

10 20 30

4.0 59 50 42 37 5.7 84 70 60 53 6.9 103 86 73 64

Gray

QCTFVS50

10 20 30

5.0 74 62 53 46 7.1 105 88 75 66 8.7 129 107 92 80

Blue

QCTFVS60

10 20 30

6.0 89 74 64 56 8.5 126 105 90 79 10.4 154 129 110 96

Black

QCTFVS80

10 20 30

8.0 119 99 85 74 11.3 168 140 120 105 13.9 206 171 147 129

10 20 30

10.0 149 124 106 93 14.1 210 175 150 131 17.3 257 214 184 161

10 20 30

12.0 178 149 127 111 17.0 252 21 180 158 21 309 257 220 193

10 20 30 40

15.0 21 26 30

10 20 30 40

18.0 267 223 191 167 25 378 315 270 236 31 463 386 331 289 36 446 382 334

10 20 30 40

21 312 260 223 195 30 441 368 315 276 36 450 386 338 42 446 390

L. Blue

QCTFVS100

Orange

QCTFVS120

Brown

QCKSS150

QCKSS180

QCKSS Tips are All Stainless

50 mesh

*When nozzle is mounted parallel to the ground. Liquid Pressure in PSI

TKVS4 White

Spray Height 18 - 20" 25 - 28" 50 - 55"

Beige

Green Purple

50 mesh

Suggested Minimum Spray Height*

Self-Aligning Groove

TIP COLOR

TKVS3 Gray

QCKSS210

TKVS5 Lt. Blue TKVS7.5 Lt. Green TKVS10 Black

TKSS15

TKSS20

223 186 159 139 315 263 225 197 386 322 276 241 446 371 318 278

TKSS30

Part No. QUICK “TURBO” FLOODJETS Net Ea. SS QCTFVS15 thru QCTFVS80 Turbo FloodJet Nozzles. $ 20.25 SS QCTFVS100 thru QCTFVS120 Turbo FloodJet Nozzles. 27.65 SS QCKSS150 thru QCKSS210 FloodJet Nozzles........... 46.95 TK P075B 3/4" Poly Coupler with Guide......................... 5.91 5% Quantity Discount on 25+ Assorted

10 20 30 40 10 20 30 40 10 20 1/4KSS2 30 40 10 20 1/4KSS2.5 30 40 10 20 1/4KSS3 30 40 10 20 30 40 10 20 1/4KSS5 30 40 10 20 1/4KSS7.5 30 40 10 20 1/4KSS10 30 40 10 1/4KSS12 20 30 40 10 1/4KSS15 20 30 40 10 1/4KSS18 20 30 40 10 1/4KSS20 20 30 40 10 20 1/4KSS22 30 40 10 1/4KSS24 20 30 40 10 1/4KSS27 20 30 40 10 3/8KSS30 20 30 40

FloodJet Pressure Nozzle in PSI No.

1/4KLC-9 1/4KLC-18 D

1/4KLC-36 3/4KLC-50 “KLCSS” Stainless Steel Single Orifice 3/4KLC-72 Projects spray to two sides in wide 3/4KLC-108 swath for “Boomless” spraying.

20 30 40 20 30 40 20 30 40 20 30 40 20 30 40 20 30 40

1.3 1.6 1.8 2.5 3.1 3.6 5.1 6.3 7.2 7.1 8.7 10.0 10.2 12.5 14.4 15.2 18.7 21.6

18 8.8 7.0 4.7 3.5 19 10.1 8.1 5.4 4.1 21 10.6 8.5 5.7 4.2 20 15.5 12.4 8.3 6.2 21 18.3 14.6 9.7 7.3 22 20 16.2 10.8 8.1 22 29 23 15.3 11.5 24 32 26 17.1 12.9 26 34 27 18.3 13.7 23 38 30 20 15.2 26 41 33 22 16.5 28 44 35 24 17.7 25 50 40 27 20 29 53 43 28 21 31 57 46 31 23 28 67 54 36 27 33 70 56 37 28 36 74 59 40 30

W= Maximum Effective Coverage with nozzle mounted at 36" height.

Part No.

STAINLESS FIELDJETS Net Ea.

SS 1/4KLCSS9 thru 1/4KLCSS36................ $ 40.00 SS 3/4KLCSS50 thru 3/4KLCSS108.............. 50.25 DULTMEIER SALES • OMAHA, NE

(800) 228-9666

40 10

20 1/2KSS50 30

D

KLC-- FIELDJET NOZZLE MOUNTED VERTICALLY

10

1/2KSS60 1/2KSS80 3/4KSS100 3/4KSS120

40 10 20 30 40 10 20 30 40 10 20 30 40 10 20 30 40

D

KSS

40" Spacing

Gallons Per Acre (GPA) Based on Water 12 14 4 20 16 5 10 6 8 MPH MPH MPH MPH MPH MPH MPH MPH MPH

.10 3.7 3.0 2.5 1.9 1.5 1.2 1.1 .93 .74 .14 5.3 4.2 3.5 2.6 2.1 1.8 1.5 1.3 1.1 .17 6.4 5.1 4.3 3.2 2.6 2.1 1.8 1.6 1.3 .20 7.4 5.9 5.0 3.7 3.0 2.5 2.1 1.9 1.5 .15 5.6 4.5 3.7 2.8 2.2 1.9 1.6 1.4 1.1 .21 7.9 6.3 5.3 3.9 3.2 2.6 2.3 2.0 1.6 .26 9.7 7.7 6.4 4.8 3.9 3.2 2.8 2.4 1.9 .30 11.1 8.9 7.4 5.6 4.5 3.7 3.2 2.8 2.2 .20 7.4 5.9 5.0 3.7 3.0 2.5 2.1 1.9 1.5 .28 10.5 8.4 7.0 5.3 4.2 3.5 3.0 2.6 2.1 .35 12.9 10.3 8.6 6.4 5.1 4.3 3.7 3.2 2.6 .40 14.9 11.9 9.9 7.4 5.9 5.0 4.2 3.7 3.0 .25 9.3 7.4 6.2 4.6 3.7 3.1 2.7 2.3 1.9 .35 13.1 10.5 8.8 6.6 5.3 4.4 3.8 3.3 2.6 .43 16.1 12.9 10.7 8.0 6.4 5.4 4.6 4.0 3.2 .50 18.6 14.9 12.4 9.3 7.4 6.2 5.3 4.6 3.7 .30 11.1 8.9 7.4 5.6 4.5 3.7 3.2 2.8 2.2 .42 15.8 12.6 10.5 7.9 6.3 5.3 4.5 3.9 3.2 .52 19.3 15.4 12.9 9.7 7.7 6.4 5.5 4.8 3.9 .60 22 17.8 14.9 11.1 8.9 7.4 6.4 5.6 4.5 .40 14.9 11.9 9.9 7.4 5.9 5.0 4.2 3.7 3.0 .57 21 16.8 14.0 10.5 8.4 7.0 6.0 5.3 4.2 .69 26 21 17.2 12.9 10.3 8.6 7.4 6.4 5.1 .80 30 24 19.6 14.9 11.9 9.9 8.5 7.4 5.9 .50 18.6 14.9 12.4 9.3 7.4 6.2 5.3 4.6 3.7 .71 26 21 17.5 13.1 10.5 8.8 7.5 6.6 5.3 .87 32 26 21 16.1 12.9 10.7 9.2 8.0 6.4 1.0 37 30 25 18.6 14.9 12.4 10.6 9.3 7.4 .75 28 22 18.6 13.9 11.1 9.3 8.0 7.0 5.6 1.1 39 32 26 19.7 15.8 13.1 11.3 9.8 7.9 1.3 48 39 32 24 19.3 16.1 13.8 12.1 9.7 1.5 56 45 37 28 22 18.6 15.9 13.9 11.1 1.0 37 30 25 18.6 14.9 12.4 10.6 9.3 7.4 1.4 53 42 35 26 21 17.5 15.0 13.1 10.5 1.7 64 51 43 32 26 21 18.4 16.1 12.9 2.0 74 59 50 37 30 25 21 18.6 14.9 1.2 45 36 30 22 17.8 14.9 12.7 11.1 8.9 1.7 63 50 42 32 25 21 18.0 15.8 12.6 2.1 77 62 51 39 31 26 22 19.3 15.4 2.4 89 71 59 45 36 30 25 22 17.8 1.5 56 45 37 28 22 18.6 15.9 13.9 11.1 2.1 79 63 53 39 32 26 23 19.7 15.8 2.6 96 77 64 48 39 32 28 24 19.3 3.0 111 89 74 56 45 37 32 28 22 1.8 67 53 45 33 27 22 19.1 16.7 13.4 2.5 95 76 63 47 38 32 27 24 18.9 3.1 116 93 77 58 46 39 33 29 23 3.6 134 107 89 67 53 45 38 33 27 2.0 74 59 50 37 30 25 21 18.6 14.9 2.8 105 84 70 53 42 35 30 26 21 3.5 129 103 86 64 51 43 37 32 26 4.0 149 119 99 74 59 50 42 37 30 2.2 82 65 54 41 33 27 23 20 16.3 3.1 116 92 77 58 46 39 33 29 23 3.8 142 113 94 71 57 47 40 35 28 4.4 163 131 109 82 65 54 47 41 33 2.4 89 71 59 45 36 30 25 22 17.8 3.4 126 101 84 63 50 42 36 32 25 4.2 154 123 103 77 62 51 44 39 31 4.8 178 143 119 89 71 59 51 45 36 2.7 100 80 67 50 40 33 29 25 20 3.8 142 113 95 71 57 47 41 35 28 4.7 174 139 116 87 69 58 50 43 35 5.4 200 160 134 100 80 67 57 50 40 3.0 111 89 74 56 45 37 32 28 22 4.2 158 126 105 79 63 53 45 39 32 5.2 193 154 129 96 77 64 55 48 39 6.0 223 178 149 111 89 74 64 56 45

Capacity 1-Nozzle (gpm)

20 1/2KSS40 30

Gallons Per Acre (GPA) Liquid Capacity FieldJet Based on Water Pressure 1-Nozzle "W" Feet Nozzle No. in PSI (gpm) 4 5 7.5 10 MPH MPH MPH MPH

All Stainless

Color Coded Nylon With Stainless Insert

FloodJet Pressure Capacity Nozzle 1-Nozzle in PSI (gpm) No.

FloodJet Tip No.

Quick Turbo Floodjet Nozzles

P075B

TKSS

TKVS

60" Spacing

Gallons Per Acre (GPA) Based on Water 12 14 20 4 16 5 10 6 8 MPH MPH MPH MPH MPH MPH MPH MPH MPH

4.0 99 79 66 50 40 33 28 25 19.8 5.7 140 112 93 70 56 47 40 35 28 6.9 171 137 114 86 69 57 49 43 34 8.0 198 158 132 99 79 66 57 50 40 5.0 124 99 83 62 50 41 35 31 25 7.1 175 140 117 88 70 58 50 44 35 8.7 214 171 143 107 86 71 61 54 43 10.0 248 198 165 124 99 83 71 62 50 6.0 149 119 99 74 59 50 42 37 30 8.5 210 168 140 105 84 70 60 53 42 10.4 257 206 171 129 103 86 73 64 51 12.0 297 238 198 149 119 99 85 74 59 8.0 198 158 132 99 79 66 57 50 40 11.3 280 224 187 140 112 93 80 70 56 13.9 343 274 229 171 137 114 98 86 69 16.0 396 317 264 198 158 132 113 99 79 10.0 248 198 165 124 99 83 71 62 50 14.1 350 280 233 175 140 117 100 88 70 17.3 429 343 286 214 171 143 122 107 86 20.0 495 396 330 248 198 165 141 124 99 12.0 297 238 198 149 119 99 85 74 59 17.0 420 336 280 210 168 140 120 105 84 20.8 514 412 343 257 206 171 147 129 1-3 24.0 594 475 396 297 238 198 170 149 119

Part No. FLOODJETS Net Ea. SS TKSS All Stainless. TeeJet.............................. $ 7.49 SS TKVS Color Coded Stainless.......................... 7.15 SS 1/4KSS All Stainless. 1/4" MPT.......................... 11.70 SS 3/8KSS All Stainless. 3/8" MPT.......................... 15.00 SS 1/2KSS All Stainless. 1/2" MPT.......................... 18.85 SS 3/4KSS All Stainless. 3/4" MPT.......................... 24.65 TeeJet TK’s Packaged in 25’s. 10% Quantity Discount on 50+ Of One Size

www.dultmeier.com

• DAVENPORT, IA

(800) 553-6975

E0367


Spray Nozzles and Tips

279

Type-RA Raindrop® Nozzles (Wide Angle)

Hollow Cone Spray for drift reduction

Color-Coded

TYPE 'F' CAPACITIES

NOZZLE NUMBER

GALLONS PER ACRE - BASED ON WATER

NOZZLE NUMBER

20 30 40 50 20 RA-4NY 30 Red 40 50 20 RA-5NY 30 Brown 40 50 20 RA-6NY 30 Grey 40 50 20 RA-8NY 30 40 White 50 20 RA-10NY 30 40 Tan 50 20 RA-15NY 30 Lt. Blue 40 50

RA-2NY Yellow

DL RA2NY thru DL RA15NY Net Ea.

$ 5.56

120˚ SPRAY ANGLE 40" SPACING 4 5 6 7.5 10 MPH MPH MPH MPH MPH

.14 5.3 4.2 3.5 2.8 2.1 .17 6.4 5.1 4.3 3.4 2.6 .20 7.4 5.9 5.0 4.0 3.0 .22 8.3 6.6 5.5 4.4 3.3 .28 10.5 8.4 7.0 5.6 4.2 .35 12.9 10.3 8.6 6.9 5.1 .40 14.9 11.9 9.9 7.9 5.9 .45 16.6 13.3 11.1 8.9 6.6 .36 13.1 10.5 8.8 7.0 5.3 .44 16.1 12.9 10.7 8.6 6.4 .50 18.6 14.9 12.4 9.9 7.4 .56 21 16.6 13.8 11.1 8.4 .43 15.8 12.6 10.5 8.4 6.3 .52 19.3 15.4 12.9 10.3 7.7 .60 22 17.8 14.8 11.9 8.9 .67 25 19.9 16.6 13.3 10.0 .57 21 16.8 14.0 11.2 8.4 .70 26 20 17.1 13.7 10.3 .80 30 24 19.8 15.8 11.9 .90 33 27 22 17.7 13.3 .71 26 21 17.5 14.0 10.5 .87 32 26 21 17.1 12.9 1.0 37 30 25 19.8 14.9 1.1 42 33 28 22 16.6 1.1 39 31 26 21 15.8 1.3 48 38 32 26 19.3 1.5 56 45 37 30 22 1.7 62 50 42 33 25

D

* F30NY green

"F" FLOODING NOZZLE with quick coupler inlet

* F40NY red

D

* F50NY tan

These are the nozzles to use for broadcast applications of liquid fertilizers, herbicides and defoliants. Layby appli­ca­ tions of herbicides are the most com­mon. Used in any applications requiring wide coverage at low pressures with large droplets. SPRAY ANGLES: Varies from 100° to 145° depending on pressure and material. MAXIMUM RECOMMENDED PRESSURE: Nylon: 100 psig. MAX. RECOMMENDED TEMP: 120°F.

* F60NY purple

F70NY

* F80NY blue

60" SPACING 18" - 22.5" HEIGHT

CAPACITY 1-NOZZLE (GPM)

1/4" TYPE-RA Broadcast Capacities

PRESSURE (PSIG)

SPRAY CHARACTERISTICS: Delivers a wide-angle, hollow cone spray pattern with the amount of driftable spray particles or "fines" (droplets under 100 micrometers) drastically reduced. FEATURES: Improves spray distribution when compared with flooding nozzles. A large orifice opening and passages, plus no internal vanes or distributors, combine to minimize clogging. The type-RA nozzle also contains a patented design element, a secondary swirl chamber located in the nozzle cap, where the swirling action of the liquid is altered, resulting in fewer driftable "fines" being discharged from the secondary orifice. This is the nozzle to use when spray drift is a problem. Replaces conventional wide angle nozzles, such as flooding nozzles, in broadcast applications with boom-type sprayers and other spraying equipment. The smaller size (1/4 NPT inlet) is wellsuited for herbicide incorporation and the larger size (3/4 NPT inlet) for high-volume, high-speed applications with flotation or truck mounted equipment.

For layby and broadcast spraying

GALLONS PER ACRE - BASED ON WATER

CAPACITY 1-NOZZLE (GPM)

1/4"

Type "F" Flooding Nozzles

Recommended Nozzle Positioning For Type-RA Raindrop® Nozzles (for most uniform spray coverage.)

PRESSURE (PSIG)

D

5 7.5 10 15 18 MPH MPH MPH MPH MPH

10 20 30 40 10 20 30 40 10 20 30 40 10 20 30 40 10 20 30 40 10 20 30 40

3.0 4.2 5.2 6.0 4.0 5.7 6.9 8.0 5.0 7.1 8.7 10.0 6.0 8.5 10.4 12.0 7.0 9.9 12.1 14.0 8.0 11.3 13.9 16.0

60 40 30 19.8 16.5 84 56 42 28 23 102 68 52 34 29 118 80 60 40 33 80 52 40 26 22 112 74 56 37 31 138 92 68 46 38 158 106 80 53 44 100 66 50 33 28 140 94 70 47 39 172 114 86 57 48 198 132 100 66 55 118 80 60 40 33 168 112 84 56 47 206 138 102 69 57 238 158 118 79 66 138 92 70 46 38 196 130 98 65 54 240 160 120 80 67 278 184 138 92 77 158 106 80 53 44 224 150 112 75 62 274 182 138 91 76 316 212 158 106 88

* Indicates Color Coding, NY=Nylon

3/4"

RA Raindrop®

*45° angle down will improve uniform mount in one of three positions. Spray patterns should be overlapped somewhat to assure uniform coverage regardless of fluctuations in boom height as the spray rig travels over uneven ground. Some applications will call for 100% overlapping patterns.

NOZZLE SIZE (3/4" Inlet)

RA-30NY 140°

D

RA-50NY 140°

3/4" DELAVAN ® Part No. Net Ea. DL RA30NY $ 16.55 DL RA50NY 16.55 DL RA60NY 17.90 DL RA80NY 17.90 DL RA100NY 17.85 DL RA120NY 17.90 DL RA200NY 19.20 DL RA240NY 17.90

RA-60NY 140° Dk. Green RA-80NY 140° Red RA-100NY 140° Tan RA-120NY 140° Purple RA-200NY 140° Lt. Green RA-240NY 140° Gold

PRESSURE (PSIG) CAPACITY 1-NOZZLE GPM

Color-Coded

140° SPRAY ANGLE AT 40 PSIG 60" SPACING

5 7.5 10 12 16 MPH MPH MPH MPH MPH 20 2.1 42 28 21 17.5 13.1 30 2.6 51 34 26 21 16.1 40 3.0 59 40 30 25 18.6 50 3.3 66 44 33 28 21 20 3.5 70 47 35 29 22 30 4.3 86 57 43 36 27 40 5.0 99 66 50 41 31 50 5.5 111 74 55 46 35 20 4.2 84 56 42 35 26 30 5.2 103 69 51 43 32 40 6.0 119 79 59 50 37 50 6.7 133 89 66 55 42 20 5.7 112 75 56 47 35 30 6.9 137 91 69 57 43 40 8.0 158 106 79 66 50 50 9.0 177 118 89 74 55 20 7.1 140 93 70 58 44 30 8.7 171 114 86 71 54 40 10.0 198 132 99 83 62 50 11.2 221 147 111 92 69 20 8.5 168 112 84 70 52  30 10.4 206 137 103 86 64 40 12.0 238 158 119 99 74 50 13.4 266 177 133 111 83 20 14.1 280 187 140 117 88 30 17.3 343 229 171 143 107 40 20.0 396 264 198 165 124 50 22.3 443 296 221 184 138 20 17.0 336 224 168 140 105 30 20.8 412 274 206 171 129 40 24.0 476 316 238 198 149

ACCESSORIES - POLY STREET ELBOW -

Wet Boom

Raindrop® Nozzle

D

Part No. DL F30NY

Type “F” Flooding Nozzles Thru F80NY Nylon

Turbo TurfJet Spray Nozzles

Net Ea. $ 5.64

Wide angle flat spray with tapered edge pattern:

- Drift Resistant -

Combines the precision and uniformity of flat spray nozzles with the clog-resistance and wide angle pattern of flooding nozzles. Uses a patented turbulence chamber to produce large, drift-resistant droplets (extremely coarse). Stainless steel with VisiFlo® color-coding or colored polypropylene. 1/4" MPT. 120° - 130° angle. Tip Color

TIP NO. (Strainer Screen Size)

YELLOW

1/4TTJ02 50 Mesh

RED

1/4TTJ04 50 Mesh

BROWN

1/4TTJ05 50 Mesh

GRAY

1/4TTJ06 50 Mesh

WHITE

1/4TTJ08 n/a

L. BLUE

1/4TTJ10 n/a

L. GREEN

1/4TTJ15 n/a

Nylon 45˚

Gallons Per 1000 Ft2 20" Spacing 3 4 5 6 8 10 mph mph mph mph mph mph 25 .16 UC .36 .27 .22 .18 .14 .11 30 .17 UC .39 .29 .23 .19 .14 .12 40 .20 UC .45 .34 .27 .23 .17 .14 50 .22 XC .50 .37 .30 .25 .19 .15 25 .32 UC .73 .54 .44 .36 .27 .22 30 .35 UC .79 .60 .48 .40 .30 .24 40 .40 UC .91 .68 .54 .45 .34 .27 50 .45 UC 1.0 .77 .61 .51 .38 .31 25 .40 UC .91 .68 .54 .45 .34 .27 30 .43 UC .97 .73 .58 .49 .37 .29 40 .50 UC 1.1 .85 .68 .57 .43 .34 50 .56 UC 1.3 .95 .76 .63 .48 .38 25 .47 UC 1.1 .80 .64 .53 .40 .32 30 .52 UC 1.2 .88 .71 .59 .44 .35 40 .60 UC 1.4 1.0 .82 .68 .51 .41 50 .67 UC 1.5 1.1 .91 .76 .57 .46 25 .63 UC 1.4 1.1 .86 .71 .54 .43 30 .69 UC 1.6 1.2 .94 .78 .59 .47 40 .80 UC 1.8 1.4 1.1 .91 .68 .54 50 .89 UC 2.0 1.5 1.2 1.0 .76 .61 25 .79 UC 1.8 1.3 1.1 .90 .67 .54 30 .87 UC 2.0 1.5 1.2 .99 .74 .59 40 1.00 UC 2.3 1.7 1.4 1.1 .85 .68 50 1.12 UC 2.5 1.9 1.5 1.3 .95 .76 25 1.19 UC 2.7 2.0 1.6 1.3 1.0 .81 30 1.30 UC 2.9 2.2 1.8 1.5 1.1 .88 40 1.50 UC 3.4 2.6 2.0 1.7 1.3 1.0 50 1.68 UC 3.8 2.9 2.3 1.9 1.4 1.1

Liquid Capacity Pressure 1 Nozzle in psi in GPM

Drop Size

UC = Ultra Coarse XC = Extremely Coarse Larger Droplets for Best Drift Control

Part No.

Inlet

Outlet

Part No. Net Ea. SS 1/4TTJ02VS thru SS 1/4TTJ15VS Stainless Turfjet Nozzle $ 9.88 SS 1/4TTJ06VP thru SS 1/4TTJ15VP Polypro Turfjet Nozzle 5.08

Net Ea.

DL 37549-1 1/4"MPT 1/4"FPT $ 1.80

DULTMEIER SALES • OMAHA, NE

(800) 228-9666

www.dultmeier.com

• DAVENPORT, IA

(800) 553-6975

E0368


Spray Nozzles & Tips

280

ConeJet Hollow Cone Spray Tips Typical Applications: Used for directed applications in air blast spraying for orchards and vineyards and other specialty crops. Also well-suited for applications of insecticides, fungicides, defoliants and foliar fertilizer at pressure of 40 PSI and above. Features: VisiFlo color-coded version consists of stainless steel or ceramic orifice in polypropylene body. Maximum operating pressure is 300 PSI. Spray angle is 80° at 100 PSI. HOW TO ORDER - Specify Tip Number. Example: TXVS4 = Stainless Steel with VisiFlo color coding. TX4 = Brass. TXSS4 = Stainless Steel. TXVK4 = Ceramic with VisiFlow color-coding.

D

D

SPRAY ANGLE

SPRAY HEIGHT 20" SPACING

80˚ 110˚

17-19" 10-12"

TwinJet Twin Flat Spray Tips are the best selection for Post-Emergence Herbicides requiring double outlet application. Use at 30-60 psi, produces small droplets in twin flat spray patterns for better penetration. 110 degree will atomize finer than 80 degree. Can also be used for Surface Applied PreEmergence products at 30-40 psi in minimum tillage ground with heavy crop residue. Available in Stainless Steel in 65, 80 and 110 degree patterns. Note: Use the “E” Series for banding over or between row crops.

SUGGESTED MINIMUM SPRAY HEIGHT

D

TwinJet Nozzles - Color Coded Stainless

Use 30” Spacing - 20” Height

TwinJet Nozzle No. Color

Pressure Capacity 1-Nozzle in PSI GPM

GPA - GALLONS PER ACRE 20" Nozzle Spacing 30" Nozzle Spacing 5 6 8 7 5 8 6 7 80° 110° MPH MPH MPH MPH MPH MPH MPH MPH Drop Size

TJ60-8002VS TJ60-4002EVS TJ60-8002EVS

30 40 50

0.17 F F 10.3 8.6 7.3 6.4 6.9 5.7 4.9 4.3 0.20 F VF 11.9 9.9 8.5 7.4 7.9 6.6 5.7 5.0 0.22 F VF 13.3 11.1 9.5 8.3 8.9 7.4 6.3 5.5

TJ60-8003VS TJ60-11003VS TJ60-4003EVS TJ60-8003EVS TJ60-8004VS TJ60-11004VS TJ60-4004EVS TJ60-8004EVS

30 40 50

0.26 F F 15.4 12.9 11.0 9.6 10.3 8.6 7.3 6.4 0.30 F F 17.8 14.9 12.7 11.1 11.9 9.9 8.5 7.4 0.34 F F 19.9 16.6 14.2 12.5 13.3 11.1 9.5 8.3

30 40 50

0.35 M F 20.6 17.1 14.7 12.9 13.7 11.4 9.8 8.6 0.40 F F 23.8 19.8 17.0 14.9 15.8 13.2 11.3 9.9 0.45 F F 26.6 22.1 19.0 16.6 17.7 14.8 12.6 11.1

TJ60-8006VS TJ60-11006VS TJ60-8006EVS TJ60-8008VS TJ60-11008VS White TJ60-8010VS TJ60-11010VS Lt. Blue

30 40 50

0.52 M M 30.9 25.7 22.0 19.3 20.6 17.1 14.7 12.9 0.60 M M 35.6 29.7 25.5 22.3 23.8 19.8 17.0 14.9 0.67 M F 39.8 33.2 28.5 24.9 26.6 22.1 19.0 16.6

30 40 50

0.69 C M 41.2 34.3 29.4 25.7 27.4 22.9 19.6 17.1 0.80 M M 47.5 39.6 33.9 29.7 31.7 26.4 22.6 19.8 0.89 M M 53.1 44.3 37.9 33.2 35.4 29.5 25.3 22.1

30 40 50

0.87 C M 51.4 42.9 36.7 32.2 34.3 28.6 24.5 21.4 1.00 C M 59.4 49.5 42.4 37.1 39.6 33.0 28.3 24.8 1.12 M M 66.4 55.3 47.4 41.5 44.3 36.9 31.6 27.7

F = Fine

VF = Very Fine

M = Medium

C = Coarse

- Larger Droplets for Best Drift Control

Part No. Twin Flat Spray Tips Net Ea.

SS TJ60-VS Stainless Color coded (all sizes)......................... $ 7.29 SS TJ60-EVS Stainless Color coded (all sizes)......................... 10.20 TeeJet Packaged in 25’s. 10% Quantity Discount on 50+ Of One Size Part No. Description Net Ea. SS TXVS1 thru TXVS26 Polypropylene with SS Insert........... $ 3.96 SS TXVK3 thru TXVK26 Polypropylene with Ceramic Insert... 3.59 SS TX1 thru TX26 Brass................................................ 3.52 SS TX1SS thru TX26SS Stainless........................................... 22.30 TeeJet Packaged in 25’s. 10% Quantity Discount on 50+ Of One Size

Wide Angle Full Cone Spray Tips FullJet Color Coded Stainless Tips are the best selection for Pre-Plant incorporated Herbicides.Operation at 15-25 psi on 40" spacing will produce larger droplets and reduced drift. Can also be used with Systemic Herbicides on 20" spacing at 20-30 psi.

D

Livestock Cooling Nozzles Keep hogs and cattle cool during the summertime. The fine mist of livestock shelter cooling nozzle tips cools by evaporation. Connects to any water supply. Add extension units for large areas. Low gallon per hour delivery provides cooling mist without creating standing water. Simple and effective. Hollow cone; 65° pattern. Larger sizes and 120° also available.

10' MODERATE AIR MOVEMENT THRU ENCLOSURE AIDS COOLING EFFECT

ConeJet Liquid (1 Noz.) Cap. TIP NO. Press. in psi in GPH 40 TX1 60 75 (100 Mesh) 90 120 40 TX2 60 75 (100 Mesh) 90 120 40 TX3 60 75 (100 Mesh) 90 120

1.0 1.2 1.3 1.4 1.6 2.0 2.4 2.6 2.8 3.2 3.0 3.6 3.9 4.3 4.8

D

LIVESTOCK SHELTER COOLING NOZZLES: ConeJet Tips are interchange­able with all TeeJet Tips. Large internal passages minimize clogging.

No. 9106 FUSED BRONZE FILTER - Brass with fused Bronze filter element equivalent to 300 mesh screen. For use with extra low capacity TeeJet Tips.

D

D

025FNBT Spray Nozzle Valve: Solid brass body. Inlet: 1/4" FPT. Outlet: 11/16" to fit nozzle caps. For use with commercial spray nozzle components. Ball Seat: Acetal. Opening: 7/32". Ball: Plated Brass. Seal: Buna N. Handle: Plated metal. Valve Dimensions: 1-7/8" L x 11/16" hexagonal. Part No. Net Ea. SS TX1 thru TX3 Brass “ConeJet” Tip..................... $ 3.52 SS 9106 Fused Bronze Filter..................... 1.86 SM 025FNBT Brass Nozzle Valve. 1/4" FPT...... 8.06

DULTMEIER SALES • OMAHA, NE

(800) 228-9666

FRONT VIEW Note: Spray patterns should be overlapped 30-50% on each edge for uniform spray distribution.

Angling nozzles 30-45˚ will even further improve the spray distribution.

GALLONS PER ACRE 40" Spacing Tip Liquid Capacity Capacity Number Pressure 1 Nozzle 1 Nozzle 4 5 6 7.5 & Color In PSI in GPM in oz./min. MPH MPH MPH MPH 15 0.34 43 12.5 10.0 8.4 6.7 FL-5 20 0.38 49 14.2 11.4 9.5 7.6 Brown 30 0.46 59 17.0 13.6 11.3 9.1 40 0.52 67 19.3 15.4 12.9 10.3 15 0.42 54 15.7 12.5 10.4 8.4 FL-6.5 20 0.48 61 17.8 14.2 11.9 9.5 Gray 30 0.57 73 21.3 17.0 14.2 11.3 40 0.65 83 24.1 19.3 16.1 12.9 15 0.51 66 19.0 15.2 12.7 10.2 FL-8 20 0.58 75 21.6 17.3 14.4 11.5 White 30 0.70 89 25.8 20.7 17.2 13.8 40 0.79 101 29.3 23.5 19.6 15.6 15 0.67 86 24.9 19.9 16.6 13.3 FL-10 20 0.76 97 28.2 22.6 18.8 15.0 Lt. Blue 30 0.91 116 33.8 27.0 22.5 18.0 40 1.00 128 37.1 29.7 24.8 19.8 15 0.97 125 36.2 28.9 24.1 19.3 FL-15 20 1.11 142 41.0 32.8 27.4 21.9 Lt. Green 30 1.32 169 49.1 39.3 32.7 26.2 40 1.50 192 55.7 44.6 37.1 29.7

Part No. Net Ea.

SS FL5VS thru FL15VS Full Cone Tips with Stainless Vane SS FL5VC thru FL15VC Full Cone Tips with Colored Sleeve

$ 7.11 4.53

TeeJet Packaged in 25’s. 10% Quantity Discount on 50+ Of One Size

www.dultmeier.com

• DAVENPORT, IA

(800) 553-6975

E0373


Spray Nozzles GuardianAir™ Spray Tips

HF High Flow 140° Wide Angle Drift Reducing Tips

Enhanced Coverage Air-Inclusion Spray Tips for Insecticide & Fungicide

for Fertilizer

Fast Cap Combo with Tip, Cap & O-Ring

Features: High Volume Coverage or High Speed Applications • 140° Pattern Ensures Unmatched Uniformity Across the SprayBoom&ThroughouttheEntirePressureRange (20-80 PSI) • Wide Spray Angle (140°) Allows for Lower Spray Height • Droplets (XC) are Under 100 Microns are Controlled • Straight-Through Design Reduces Clogging & Easily Fits Directly on Standard Nozzle Bodies • FastCap™ Design Adds Convenience.

281

Fast Cap Combo with Tip, Cap & EPDM Gasket, Strainer is NOT INCLUDED

Features: For Application Rates Around 10 GPA • Reduce Drift While Increasing Droplet Deposition & Retention on the Foliage with D Air-Induced Spray • Uniform Coverage on the Front & Back of Foliage for a Wide Range of Speeds • Tip Sizes for Speeds from 3 to Over 20 MPH • Pressures 15 to 115 PSI • Includes Cap, EPDM Gasket & 50M Strainer.

D

FCGA 120° - GUARDIAN™ - Enhanced Coverage Air-Inclusion

30 PSI 40 PSI 50 PSI 60 PSI 70 PSI 80 PSI 90 PSI 100 PSI

HF 140° - Wide Angle Drift - High Flow 20 PSI 30 PSI 40 PSI 50 PSI 60 PSI 70 PSI 80 PSI

FCGA110-015 FCGA110-02 FCGA110-025 FCGA110-03 FCGA110-035 FCGA110-04 FCGA110-05

HF140-08 UC UC UC UC XC XC XC HF140-10 UC UC UC UC XC XC XC HF140-15 UC UC UC UC XC XC XC HF140-20 UC UC UC UC XC XC XC HF140-30 UC UC UC UC XC XC XC HF140-40 UC UC UC UC XC XC XC HF140-50 UC UC UC UC XC XC XC HF140-60 UC UC UC UC XC XC XC GPM 20” Spacing 40” Spacing Part No. Color @40 PSI GPA @ 12MPH GPA @ 12 MPH Net Ea. TW HF140-08 White .80 19.8 10.0 $ 8.67 TW HF140-10 Blue 1.0 25.0 12.5 8.67 TW HF140-15 Green 1.5 37.0 18.5 8.67 TW HF140-20 Black 2.0 50.0 25.0 8.67 TW HF140-30 Tan 3.0 74.0 37.0 8.67 TW HF140-40 White 4.0 99.0 50.0 8.67 TW HF140-50 Purple 5.0 124 62.0 8.67 TW HF140-60 Yellow 6.0 149 75.0 8.67 TW 65-VBS205 Viton ® O-Ring........................................................... .45

GPM 20” Spacing 20” Spacing Part No. Color @40 PSI GPA @ 12MPH GPA @ 16 MPH Net Ea. TW FCGA110-015 Green .15 3.7 2.8 $ 6.57 TW FCGA110-02 Yellow .20 5.0 3.7 6.57 TW FCGA110-025 Purple .25 6.2 4.6 6.57 TW FCGA110-03 Blue .30 7.4 5.6 6.57 TW FCGA110-035 Red .35 8.7 6.5 6.57 TW FCGA110-04 Red .40 9.9 7.4 6.57 TW FCGA110-05 Brown .50 12.4 9.3 6.57 TW 22W11MF64 EPDM Gasket Included............................................. .30 TW 22W11MF64V Viton® Gasket.......................................................... .99 TW TS01-50 50 Mesh Screen, Blue............................................... .79 TW TS01-100 100 Mesh Screen, Green.......................................... .79

GuardianAir Twin™ Spray Tips

Guardian™ Spray Tips

High-Coverage, Low-Drift

for Insecticide & Fungicide Fast Cap Design

Unique 20° inclined spray pattern allows users to adjust the spray rearward, forward or as a twin spray to best suit the application target. D

Features: 120° Pattern is Inclined 20° • Aim Rearward for General Spraying to target broadleaf Canopies & Horizontal Leaves • Aim Forward to Hit Vertical Targets • Alternate Nozzles Forward & Rearward to Create a Twin Spray in a Dense Canopy • Pressures 15 to 115 PSI. Includes EPDM gasket and 50M strainer.

GRD 120° - GUARDIAN™ - Tapered Flat Fan Spray Pattern

30 PSI 40 PSI 50 PSI 60 PSI 70 PSI 80 PSI 90 PSI 100 PSI

GRD120-01 GRD120-015 M M M M F F F F GRD120-02 M M M M M M M M GRD120-025 M M M M M M M M GRD120-03 M M M M M M M M GRD120-04 VC C C C M M M M GRD120-05 XC VC VC C M M M M GRD120-06 XC VC VC C M M M M GRD120-08 VC C M M M M M F

GPM 20” Spacing 20” Spacing Part No. Color @40 PSI GPA @ 12MPH GPA @ 16 MPH Net Ea. TW GRD120-01 Orange .10 2.5 1.9 $ 4.96 TW GRD120-015 Green .15 3.7 2.8 4.96 TW GRD120-02 Yellow .20 5.0 3.7 4.96 TW GRD120-025 Purple .25 6.2 4.6 4.96 TW GRD120-03 Blue .30 7.4 5.6 4.96 TW GRD120-04 Red .40 9.9 7.4 4.96 TW GRD120-05 Brown .50 12.4 9.3 4.96 TW GRD120-06 Gray .60 14.9 11.1 4.96 TW GRD120-08 White .80 19.8 14.9 4.96 TW 22W11MF64 EPDM Gasket Included............................................. .30 TW 22W11MF64V Viton® Gasket.......................................................... .99 TW TS02-50 50 Mesh Screen, Blue Included................................ .91 TW TS02-100 100 Mesh Screen, Green.......................................... .91

DULTMEIER SALES • OMAHA, NE

(800) 228-9666

XC C C M M M M M VC M M M M M M M VC C M M M M M M XC VC C C M M M M VC C M M M M M M VC C C M M M M M XC C C C M M M M

for Insecticide & Fungicide Features: High Coverage Forward & Rear Facing Fans Help Penetrate Complex Canopies • Better Coverage with More Drops per Gallon • Easy-to-Install, Locking Ring & O-Ring Seal Design • Includes 50M strainer • Pressures 30 to 115 PSI.

D

GAT 110° - GuardianAir Twin™ 30 PSI 40 PSI 50 PSI 60 PSI 70 PSI 80 PSI 90 PSI 100 PSI

GAT110-02 C M M M M M M F GAT110-025 VC C M M M M M M GAT110-03 VC C M M M M M M GAT110-04 C M M M M M M M GAT110-05 VC C C M M M M M GAT110-06 XC C C C M M M M GAT110-08 VC C C C M M M M GPM 20” Spacing 20” Spacing Part No. Color @60 PSI GPA @ 12MPH GPA @ 16 MPH Net Ea. TW GAT110-02 Yellow .24 5.9 4.5 $ 7.22 TW GAT110-025 Purple .31 7.7 5.8 7.22 TW GAT110-03 Blue .37 9.2 6.9 7.22 TW GAT110-035 Dk. Red .43 10.6 8.1 7.24 TW GAT110-04 Red .49 12.1 9.1 7.22 TW GAT110-05 Brown .61 15.1 11.3 7.22 TW GAT110-06 Gray .73 18.1 13.6 7.22 TW GAT110-08 White .98 24.0 18.2 7.22 TW 65-VBS205 Viton® O-Ring........................................................... .45 TW TS02-50 50 Mesh Screen, Blue Included................................. .91 TW TS02-100 100 Mesh Screen, Green........................................... .91 Where Tables are Based on 20" Nozzle Spacing Other Spacing

10" 12" 14" 16" 18" 22" 24" 30"

Conversion Factor

2.0 1.67 1.43 1.25 1.11 0.91 0.83 0.66

Tabulation Based on Spraying Water at 70° F. F=Fine • M=Medium • C=Coarse • VC=Very Coarse • XC=Extremely Coarse • UC=ULTRA Coarse Viton® is a registered trademark of DuPont Performance Elastomers

www.dultmeier.com

• DAVENPORT, IA

(800) 553-6975

E0897


Spray Nozzles

282

FastCap ESI Spray Tips

Ultra Lo-Drift Spray Tips

Six Stream • Tip, Cap & Gasket

with Dual Air Eduction Technology for Weed Control

• Six Identical Fluid Streams Distribute Fertilizer Accurately. • For target fertilizer application. Coarse droplets • Use at 24" height and 20" centers. • Large Outlet Holes. • Ceramic orifice, ISO body colors. • Includes Tip, Cap & EPDM Gasket

Features: ULD Creates Air-Filled Droplets which Significantly Reduce Spray Drift • Wide Spray Angle (120°) • Uniformity at All Pressures (15-115 PSI) • Precision Molded from Durable Polyacetal • Available in Sizes 015 to 08 • Convenient FastCap™ Available • Pressures 15 to 115 PSI • FastCap® complete includes tip, cap, gasket and MiniClean™ strainer for sizes 015-06. Includes EPDM Gasket and 50M screen.

D

GPM 20” Spacing 20” Spacing Part No. Color @ 30 PSI GPA @ 6MPH GPA @ 10 MPH Net Ea. TW FCESI110015 Green .13 6.4 3.9 $ 6.86 TW FCESI11002 Yellow .17 8.4 5.0 6.86 TW FCESI110025 Lilac .22 10.9 6.5 6.86 TW FCESI11003 Blue .26 12.9 7.7 6.86 TW FCESI11004 Red .35 17.3 10.4 6.86 TW FCESI11005 Brown .43 21.0 12.8 6.88 TW FCESI11006 Gray .52 26.0 15.4 6.86 TW FCESI11008 White .69 34.0 20.0 6.86 TW FCESI11010 Lt. Blue .87 43.0 26.0 6.86 TW FCESI11015 Lime Green 1.30 64.0 39.0 6.86 TW 65-VBS205 Viton ® O-Ring................................................................. .45

ULD 120° - Ultra Lo Drift - Dual Air Eduction 30 PSI 40 PSI 50 PSI 60 PSI 70 PSI 80 PSI 90 PSI 100 PSI

FCULD120015 XC VC UC C C C M M FCULD12002 XC C C C M M M M FCULD120025 XC C C C M M M M FCULD12003 XC C C C M M M M FCULD12004 UC UC XC XC XC VC VC C FCULD12005 UC XC XC XC VC VC VC C FCULD12006 UC XC XC VC C C C C FCULD12008 XC VC VC C C C M M

GPM 20” Spacing 20” Spacing Part No. Color @ 40 PSI GPA @ 12MPH GPA @ 16 MPH Net Ea. TW FCULD120015 Green .15 3.7 2.8 $ 7.22 TW FCULD12002 Yellow .20 5.0 3.7 7.25 TW FCULD120025 Purple .25 6.2 4.6 7.22 TW FCULD12003 Blue .30 7.4 5.6 7.22 TW FCULD12004 Red .40 9.9 7.4 7.25 TW FCULD12005 Brown .50 12.4 9.3 7.22 TW FCULD12006 Gray .60 14.9 11.1 7.22 TW FCULD12008 White .80 19.8 14.9 7.21 TW 1700-0255 EPDM Gasket........................................................ .51 TW TS01-50 50 Mesh Strainer................................................... .79

Flood Spray Nozzles

80° to 160° Spray Angle • 10 to 60 PSI • Polyacetal Material • Medium to Coarse Droplets at Low Pressures

• Stainless Insert with EPDM Gasket in Color Coded Cap D D

GPM 20” Spacing 20” Spacing Droplet Part No. Color @ 40 PSI GPA @ 12MPH GPA @ 16 MPH Size Net Ea. TW FCTR8001 Orange .10 2.5 1.9 VF $ 4.89 TW FCTR80015 Green .15 3.7 2.8 F 4.89 TW FCTR8002 Yellow .20 5.0 3.7 F 4.90 TW FCTR8003 Blue .30 7.4 5.6 F 4.90 TW FCTR8004 Red .40 9.9 7.4 M 4.89 TW FCTR8005 Brown .50 12.4 9.3 M 4.90 TW FCTR8006 Gray .60 14.9 11.1 M 4.89 TW FCTR8008 White .80 19.8 14.9 C 4.90 TW FCTR8010 Lt. Blue 1.0 25.0 18.6 C 4.89 TW FCTR8015 Lime Green 1.5 37.0 28.0 C 4.90 TW FCTR11001 Orange .10 2.5 1.9 VF 4.89 TW FCTR110015 Green .15 3.7 2.8 F 2.87 TW FCTR11002 Yellow .20 5.0 3.7 F 4.85 TW FCTR11003 Blue .30 7.4 5.6 F 4.90 TW FCTR11004 Red .40 9.9 7.4 F 4.90 TW FCTR11005 Brown .50 12.4 9.3 F 4.90 TW FCTR11006 Gray .60 14.9 11.1 M 4.90 TW FCTR11008 White .80 19.8 14.9 M 4.90 TW FCTR11010 Lt. Blue 1.0 25.0 18.6 M 4.62 TW FCTR11015 Lime Green 1.5 37.0 28.0 C 4.89 TW 22W11MF64 EPDM Gasket................................................................... .30 TW 22W11MF64V Viton® Gasket................................................................. .99 TW TS01-50 50 Mesh Screen, Blue...................................................... .79 TW TS01-100 100 Mesh Screen, Green................................................. .79 Tabulation Based on Spraying Water at 70° F. F=Fine • M=Medium • C=Coarse • VC=Very Coarse • XC=Extremely Coarse • UC=ULTRA Coarse

Download Here

• Select Nozzle by Chemical or Application • Choose Chemical Company & Chemical Name • The Recommended Nozzle is Shown on the Results DULTMEIER SALES • OMAHA, NE

Download Here

(800) 228-9666

10 PSI 20 PSI 30 PSI 40 PSI 50 PSI 60 PSI

30DT0.5 VC M F F F F 30DT1.0 C M F F F F 30DT1.5 VC M M F F F 30DT2.0 M M M F F F 30DT2.5 C M M M F F 30DT3.0 C M M M M M 30DT4.0 M M M M M F 30DT5.0 M M M M F F 30DT7.5 C C C C C M 30DT10 C M M M M M 30DT15 C C C C C M 30DT20 VC C C C C C

• Tapered Flat Fan Pattern

• Versatile Tip for All Agricultural Chemicals

Nozzle

DT - DeflecTip Wide-Angle Flat Flood Tip

FCTR Total Range Fast Cap Spray Tips in 80° & 100°

• Pressures from 15 PSI to 60 PSI

• Wide Angle, Low Spray Height

D

Cap GPM 20” Spacing 20” Spacing Part No. Color @ 30 PSI GPA @ 5 MPH GPA @ 10 MPH Net Ea. TW 30DT0.5 Orange .087 2.6 1.3 $ .93 TW 30DT1.0 Yellow .13 5.0 2.5 .93 TW 30DT1.5 Blue .26 7.7 3.9 .95 TW 30DT2.0 Red .35 10.4 5.2 .93 TW 30DT2.5 Brown .43 12.8 6.4 .93 TW 30DT3.0 Gray .52 15.4 7.7 .95 TW 30DT4.0 White .69 20.5 10.2 .93 TW 30DT5.0 Lt. Blue .87 25.8 12.9 .95 TW 30DT7.5 Lime Green 1.30 38.6 19.3 .95 TW 30DT10 Black 1.73 51.4 25.7 .93 TW 30DT15 Lt. Purple 2.60 77.2 38.6 .95 TW 30DT20 Purple 3.46 103.0 51.4 .93 TW CAP30-20 Black Deflectip Cap with EPDM Gasket .... .68

Solid Stream Nozzles for Fertilizer Injection

D

0° Nozzles molded in PVDF (polyvinylidene fluoride) for precision injection of nitrogen or acid based liquid fertilizers. Superior resistance to orifice wear compared to brass or stainless steel. 1/4” MPT (Hybrid thread for NPT & BSP). 15 to 60 PSI pressure range. For 28% nitrogen use a conversion factor of 1.13 For 32% nitrogen use a conversion factor of 1.15

GPM 20” Spacing 20” Spacing Part No. *Color @ 40 PSI GPA @ 5 MPH GPA @ 10 MPH Net Ea. TW 2E00 Orange .20 11.9 5.9 $ 2.20 TW 3E00 Red .30 17.8 8.9 2.20 TW 4E00 Lt. Blue .40 23.8 11.9 2.20 TW 5E00 Yellow .50 29.7 14.9 2.20 TW 6E00 Lt. Green .60 35.6 17.8 2.20 TW 7E00 Brown .70 41.6 20.8 2.20 TW 10E00 Lt. Blue 1.00 59.4 29.7 2.22 TW 15E00 Green 1.50 89.1 44.6 2.20 TW 20E00 Lime Green 2.00 119.0 59.4 2.20 TW 30E00 Red 3.00 178.0 89.1 2.20 * Note: Colors may change to Grey. Viton® is a registered trademark of DuPont Performance Elastomers

www.dultmeier.com

• DAVENPORT, IA

(800) 553-6975

E0906


Spray Nozzles

283

Liquid APPLICATION PER ACRE BASED ON 20” NOZZLE SPACING Nozzle Pressure Droplet Flow 4 5 6 8 10 12 14 16 18 20 GPM mph mph mph mph mph mph mph mph mph mph Nozzle # Number PSI Size

15 C 20 C 30 M 40 M ORANGE AM11001 50 F 60 F 70 F 80 F 90 F

0.06 4.5 3.6 3.0 2.3 1.8 1.5 1.3 1.1 1.0 0.9 0.07 5.2 4.2 3.5 2.6 2.1 1.7 1.5 1.3 1.2 1.0 0.09 6.4 5.1 4.3 3.2 2.6 2.1 1.8 1.6 1.4 1.3 0.10 7.4 5.9 4.9 3.7 3.0 2.5 2.1 1.9 1.6 1.5 0.11 8.3 6.6 5.5 4.1 3.3 2.8 2.4 2.1 1.8 1.7 0.12 9.1 7.3 6.1 4.5 3.6 3.0 2.6 2.3 2.0 1.8 0.13 9.8 7.9 6.5 4.9 3.9 3.3 2.8 2.5 2.2 2.0 0.14 10.5 8.4 7.0 5.2 4.2 3.5 3.0 2.6 2.3 2.1 0.15 11.1 8.9 7.4 5.6 4.5 3.7 3.2 2.8 2.5 2.2

15 C 20 C 30 M 40 M GREEN AM110015 50 F 60 F 70 F 80 F 90 F

0.09 6.8 5.5 4.5 3.4 2.7 2.3 1.9 1.7 1.5 1.4 0.11 7.9 6.3 5.2 3.9 3.1 2.6 2.2 2.0 1.7 1.6 0.13 9.6 7.7 6.4 4.8 3.9 3.2 2.8 2.4 2.1 1.9 0.15 11.1 8.9 7.4 5.6 4.5 3.7 3.2 2.8 2.5 2.2 0.17 12.4 10.0 8.3 6.2 5.0 4.1 3.6 3.1 2.8 2.5 0.18 13.6 10.9 9.1 6.8 5.5 4.5 3.9 3.4 3.0 2.7 0.20 14.7 11.8 9.8 7.4 5.9 4.9 4.2 3.7 3.3 2.9 0.21 15.7 12.6 10.5 7.9 6.3 5.2 4.5 3.9 3.5 3.1 0.22 16.7 13.4 11.1 8.3 6.7 5.6 4.8 4.2 3.7 3.3

15 C 20 C 30 C 40 M YELLOW AM11002 50 M 60 F 70 F 80 F 90 F

0.12 9.1 7.3 6.1 4.5 3.6 3.0 2.6 2.3 2.0 1.8 0.14 10.5 8.4 7.0 5.2 4.2 3.5 3.0 2.6 2.3 2.1 0.17 12.9 10.3 8.6 6.4 5.1 4.3 3.7 3.2 2.9 2.6 0.20 14.8 11.9 9.9 7.4 5.9 4.9 4.2 3.7 3.3 3.0 0.22 16.6 13.3 11.1 8.3 6.6 5.5 4.7 4.1 3.7 3.3 0.24 18.2 14.5 12.1 9.1 7.3 6.1 5.2 4.5 4.0 3.6 0.26 19.6 15.7 13.1 9.8 7.9 6.5 5.6 4.9 4.4 3.9 0.28 21.0 16.8 14.0 10.5 8.4 7.0 6.0 5.2 4.7 4.2 0.30 22.3 17.8 14.8 11.1 8.9 7.4 6.4 5.6 4.9 4.5

15 VC 20 C 30 C 40 C PURPLE AM110025 50 M 60 M 70 M 80 M 90 F

0.15 11.4 9.1 7.6 5.7 4.5 3.8 3.2 2.8 2.5 2.3 0.18 13.1 10.5 8.7 6.6 5.2 4.4 3.7 3.3 2.9 2.6 0.22 16.1 12.9 10.7 8.0 6.4 5.4 4.6 4.0 3.6 3.2 0.25 18.5 14.8 12.4 9.3 7.4 6.2 5.3 4.6 4.1 3.7 0.28 20.7 16.6 13.8 10.4 8.3 6.9 5.9 5.2 4.6 4.1 0.31 22.7 18.2 15.1 11.4 9.1 7.6 6.5 5.7 5.0 4.5 0.33 24.5 19.6 16.4 12.3 9.8 8.2 7.0 6.1 5.5 4.9 0.35 26.2 21.0 17.5 13.1 10.5 8.7 7.5 6.6 5.8 5.2 0.37 27.8 22.3 18.5 13.9 11.1 9.3 7.9 7.0 6.2 5.6

15 XC 20 VC 30 VC 40 M BLUE AM11003 50 M 60 M 70 M 80 M 90 M

0.18 13.6 10.9 9.1 6.8 5.5 4.5 3.9 3.4 3.0 2.7 0.21 15.7 12.6 10.5 7.9 6.3 5.2 4.5 3.9 3.5 3.1 0.26 19.3 15.4 12.9 9.6 7.7 6.4 5.5 4.8 4.3 3.9 0.30 22.3 17.8 14.8 11.1 8.9 7.4 6.4 5.6 4.9 4.5 0.34 24.9 19.9 16.6 12.4 10.0 8.3 7.1 6.2 5.5 5.0 0.37 27.3 21.8 18.2 13.6 10.9 9.1 7.8 6.8 6.1 5.5 0.40 29.4 23.6 19.6 14.7 11.8 9.8 8.4 7.4 6.5 5.9 0.42 31.5 25.2 21.0 15.7 12.6 10.5 9.0 7.9 7.0 6.3 0.45 33.4 26.7 22.3 16.7 13.4 11.1 9.5 8.3 7.4 6.7

15 XC 20 VC 30 VC 40 C RED AM11004 50 C 60 M 70 M 80 M 90 M

0.24 18.2 14.5 12.1 9.1 7.3 6.1 5.2 4.5 4.0 3.6 0.28 21.0 16.8 14.0 10.5 8.4 7.0 6.0 5.2 4.7 4.2 0.35 25.7 20.6 17.1 12.9 10.3 8.6 7.3 6.4 5.7 5.1 0.40 29.7 23.7 19.8 14.8 11.9 9.9 8.5 7.4 6.6 5.9 0.45 33.2 26.5 22.1 16.6 13.3 11.1 9.5 8.3 7.4 6.6 0.49 36.3 29.1 24.2 18.2 14.5 12.1 10.4 9.1 8.1 7.3 0.53 39.3 31.4 26.2 19.6 15.7 13.1 11.2 9.8 8.7 7.9 0.57 42.0 33.6 28.0 21.0 16.8 14.0 12.0 10.5 9.3 8.4 0.60 44.5 35.6 29.7 22.3 17.8 14.8 12.7 11.1 9.9 8.9

15 XC 20 XC 30 VC 40 C BROWN AM11005 50 C 60 C 70 M 80 M 90 M

0.31 22.7 18.2 15.2 11.4 9.1 7.6 6.5 5.7 5.1 4.5 0.35 26.3 21.0 17.5 13.1 10.5 8.8 7.5 6.6 5.8 5.3 0.43 32.2 25.7 21.4 16.1 12.9 10.7 9.2 8.0 7.1 6.4 0.50 37.1 29.7 24.8 18.6 14.9 12.4 10.6 9.3 8.3 7.4 0.56 41.5 33.2 27.7 20.8 16.6 13.8 11.9 10.4 9.2 8.3 0.61 45.5 36.4 30.3 22.7 18.2 15.2 13.0 11.4 10.1 9.1 0.66 49.1 39.3 32.8 24.6 19.7 16.4 14.0 12.3 10.9 9.8 0.71 52.5 42.0 35.0 26.3 21.0 17.5 15.0 13.1 11.7 10.5 0.75 55.7 44.6 37.1 27.9 22.3 18.6 15.9 13.9 12.4 11.1

15 XC 20 XC 30 VC 40 C GRAY AM11006 50 C 60 C 70 M 80 M 90 M

0.37 27.3 21.8 18.2 13.6 10.9 9.1 7.8 6.8 6.1 5.5 0.42 31.5 25.2 21.0 15.8 12.6 10.5 9.0 7.9 7.0 6.3 0.52 38.6 30.9 25.7 19.3 15.4 12.9 11.0 9.6 8.6 7.7 0.60 44.6 35.7 29.7 22.3 17.8 14.9 12.7 11.1 9.9 8.9 0.67 49.8 39.9 33.2 24.9 19.9 16.6 14.2 12.5 11.1 10.0 0.74 54.6 43.7 36.4 27.3 21.8 18.2 15.6 13.6 12.1 10.9 0.79 59.0 47.2 39.3 29.5 23.6 19.7 16.8 14.7 13.1 11.8 0.85 63.0 50.4 42.0 31.5 25.2 21.0 18.0 15.8 14.0 12.6 0.90 66.8 53.5 44.6 33.4 26.7 22.3 19.1 16.7 14.9 13.4

Low Pressure AirMix® Nozzles Minimizes Drift AirMix® Nozzles are a compact, two-piece air injection nozzle that fits in a standard cap, and can be cleaned without tools. The AirMix® utilizes a unique air cleaning system to prevent nozzle plugging. Please target 40 PSI when selecting nozzle size, to allow for changes in speed. Higher Pressures are recommended for penetrating dense canopies and for coverage with critical contact chemicals.

D D

AM11001 AM110015 AM11002 AM110025 AM11003 AM11004 AM11005 AM11006

AMCQ110015 AMCQ11002 AMCQ11003 AMCQ11004 AMCQ11005 AMCQ11006

D

D

AMOC11002 AMOC110025 AMOC11003 AMOC11004 AMOC11005

AMHC80025

AMDF02 AMDF03 AMDF04 AMDF05 AMDF06 AMDF07 AMDF08 AMDF09 AMDF010 AMDF012

D

Tabulation Based on Spraying Water at 70° F. F = Fine VF = Very Fine M = Medium C = Coarse VC = Very Coarse XC = Extremely Coarse Larger Droplets for Best Drift Control

Pressure Range: 15 to 90 PSI Suggested Spray Height: 16” to 36” (on 20” centers) Material of Construction: Polyacetal or Polypropylene with EPDM Part No. GT AM11001 thru AM11006 GT AMCQ110015 thru AMCQ11006 GT AMHC80025 GT AMOC11002 thru AMOC11005 GT AMDF02 thru AMDF012

DULTMEIER SALES • OMAHA, NE

Low Pressure AirMix® Nozzles................................ Acid Resistant AirMix® Nozzles............................... CALL Hollow Cone AirMix® Low Pressure Nozzle............. for Off Center AirMix® Nozzles...................................... PRICING Dual Fan AirMix® Low Pressure Nozzles.................

(800) 228-9666

www.dultmeier.com

• DAVENPORT, IA

(800) 553-6975

E0931


Spray Nozzles

284

Liquid APPLICATION PER ACRE BASED ON 20” NOZZLE SPACING Nozzle Pressure Droplet Flow 5 6 7 8 10 12 14 16 18 20 Number PSI Size GPM mph mph mph mph mph mph mph mph mph mph

Medium Pressure TurboDrop® Nozzles

30 C 40 C 50 M TDXL110015 60 M TDCXL110015 70 M 80 M 90 F 100 F 120 F

0.13 7.7 6.4 5.5 4.8 3.9 3.2 2.8 2.4 2.1 1.9 0.15 8.9 7.4 6.4 5.6 4.5 3.7 3.2 2.8 2.5 2.2 0.17 10.0 8.3 7.1 6.2 5.0 4.1 3.6 3.1 2.8 2.5 0.18 10.9 9.1 7.8 6.8 5.5 4.5 3.9 3.4 3.0 2.7 0.20 11.8 9.8 8.4 7.4 5.9 4.9 4.2 3.7 3.3 2.9 0.21 12.6 10.5 9.0 7.9 6.3 5.2 4.5 3.9 3.5 3.1 0.22 13.4 11.1 9.5 8.3 6.7 5.6 4.8 4.2 3.7 3.3 0.24 14.1 11.7 10.1 8.8 7.0 5.9 5.0 4.4 3.9 3.5 0.26 15.4 12.9 11.0 9.6 7.7 6.4 5.5 4.8 4.3 3.9

30 C 40 C 50 M TDXL11002 60 M TDCXL11002 70 M 80 M 90 F 100 F 120 F

0.24 14.5 12.1 10.4 9.1 7.3 6.1 5.2 4.5 4.0 3.6 0.26 15.7 13.1 11.2 9.8 7.9 6.5 5.6 4.9 4.4 3.9 0.28 16.8 14.0 12.0 10.5 8.4 7.0 6.0 5.2 4.7 4.2 0.30 17.8 14.8 12.7 11.1 8.9 7.4 6.4 5.6 4.9 4.5 0.32 18.8 15.6 13.4 11.7 9.4 7.8 6.7 5.9 5.2 4.7 0.35 20.6 17.1 14.7 12.9 10.3 8.6 7.3 6.4 5.7 5.1

The TurboDrop® Venturi is the heart of both the TurboDrop® XL and TurboDrop® Dual Fan nozzle. The Venturi (or injector) meters the flow and injects air into the spray fluid. The TurboDrop® Venturi is ISO color coded for flow rate.

30 VC 40 VC 50 C TDXL110025 60 M TDCXL110025 70 M 80 M 90 M 100 M 120 F

0.22 12.9 10.7 9.2 8.0 6.4 5.4 4.6 4.0 3.6 3.2 0.25 14.8 12.4 10.6 9.3 7.4 6.2 5.3 4.6 4.1 3.7 0.28 16.6 13.8 11.9 10.4 8.3 6.9 5.9 5.2 4.6 4.1 0.31 18.2 15.1 13.0 11.4 9.1 7.6 6.5 5.7 5.0 4.5 0.33 19.6 16.4 14.0 12.3 9.8 8.2 7.0 6.1 5.5 4.9 0.35 21.0 17.5 15.0 13.1 10.5 8.7 7.5 6.6 45.8 5.2 0.37 22.3 18.5 15.9 13.9 11.1 9.3 7.9 7.0 46.2 5.6 0.40 23.5 19.6 16.8 14.7 11.7 9.8 8.4 7.3 6.5 5.9 0.43 25.7 21.4 18.4 16.1 12.9 10.7 9.2 8.0 7.1 6.4

The TurboDrop® Venturi utilizes a patented stabilization chamber and pulsation dampener which results in an even mixing of air with the spray liquid and a tighter more uniform droplet spectrum for a unique combination of drift control and coverage.

30 XC 40 VC 50 C TDXL11003 60 C TDCXL11003 70 M 80 M 90 M 100 M 120 M

0.26 15.4 12.9 11.0 9.6 7.7 6.4 5.5 4.8 4.3 3.9 0.30 17.8 14.8 12.7 11.1 8.9 7.4 6.4 5.6 4.9 4.5 0.34 19.9 16.6 14.2 12.4 10.0 8.3 7.1 6.2 5.5 5.0 0.37 21.8 18.2 15.6 13.6 10.9 9.1 7.8 6.8 6.1 5.5 0.40 23.6 19.6 16.8 14.7 11.8 9.8 8.4 7.4 6.5 5.9 0.42 25.2 21.0 18.0 15.7 12.6 10.5 9.0 7.9 7.0 6.3 0.45 26.7 22.3 19.1 16.7 13.4 11.1 9.5 8.3 7.4 6.7 0.47 28.2 23.5 20.1 17.6 14.1 11.7 10.1 8.8 7.8 7.0 0.52 30.8 25.7 22.00 19.3 15.4 12.9 11.0 9.6 8.6 7.7

30 XC 40 VC 50 C TDXL11004 60 C TDCXL11004 70 M 80 M 90 M 100 M 120 M

0.35 20.6 17.1 14.7 12.9 10.3 8.6 7.3 6.4 5.7 5.1 0.40 23.7 19.8 17.0 14.8 11.9 9.9 8.5 7.4 6.6 5.9 0.45 26.5 22.1 19.0 16.6 13.3 11.1 9.5 8.3 7.4 6.6 0.49 29.1 24.2 20.8 18.2 14.5 12.1 10.4 9.1 8.1 7.3 0.53 31.4 26.2 22.4 19.6 15.7 13.1 11.2 9.8 8.7 7.9 0.57 33.6 28.0 24.0 21.0 16.8 14.0 12.0 10.5 9.3 8.4 0.60 35.6 29.7 25.4 22.3 17.8 14.8 12.7 11.1 9.9 8.9 0.63 37.5 31.3 26.8 23.5 18.8 15.6 13.4 11.7 10.4 9.4 0.69 41.1 34.3 29.4 25.7 20.6 17.1 14.7 12.9 11.4 10.3

30 XC 40 XC 50 VC TDXL11005 60 VC TDCXL11005 70 C 80 C 90 M 100 M 120 M

0.43 25.7 21.4 18.4 16.1 12.9 10.7 9.2 8.0 7.1 6.4 0.50 29.7 24.8 21.2 18.6 14.9 12.4 10.6 9.3 8.3 7.4 0.56 33.2 27.7 23.7 20.8 16.6 13.8 11.9 10.4 9.2 8.3 0.61 36.4 30.3 26.0 22.7 18.2 15.2 13.0 11.4 10.1 9.1 0.66 39.3 32.8 28.1 24.6 19.7 16.4 14.0 12.3 10.9 9.8 0.71 42.0 35.0 30.0 26.3 21.0 17.5 15.0 13.1 11.7 10.5 0.75 44.6 37.1 31.8 27.9 22.3 18.6 15.9 13.9 12.4 11.1 0.79 47.0 39.2 33.6 29.4 23.5 19.6 16.8 14.7 13.1 11.7 0.87 51.5 42.9 36.8 32.2 25.7 21.4 18.4 16.1 14.3 12.9

30 XC 40 XC 50 XC TDXL11006 60 VC TDCXL11006 70 VC 80 C 90 C 100 M 120 M

0.52 30.9 25.7 22.1 19.3 15.4 12.9 11.1 9.6 8.6 7.7 0.60 35.7 29.7 25.5 22.3 17.8 14.9 12.7 11.1 9.9 8.9 0.67 39.9 33.2 28.5 24.9 19.9 16.6 14.2 12.5 11.1 10.0 0.74 43.7 36.4 31.2 27.3 21.8 18.2 15.6 13.6 12.1 10.9 0.79 47.2 39.3 33.7 29.5 23.6 19.7 16.8 14.7 13.1 11.8 0.85 50.4 42.0 36.0 31.5 25.2 21.0 18.0 15.8 14.0 12.6 0.90 53.5 44.6 38.2 33.4 26.7 22.3 19.1 16.7 14.9 13.4 0.95 56.4 47.0 40.3 35.2 28.2 23.5 20.1 17.6 15.7 14.1 1.06 61.8 51.5 44.1 38.6 30.9 25.7 22.1 19.3 17.2 15.4

30 XC 40 XC 50 XC TDXL11008 60 XC TDCXL11008 70 VC 80 VC 90 VC 100 C 120 C

0.69 41.2 34.3 29.4 25.7 20.6 12.9 14.7 12.9 11.4 10.3 0.80 47.5 39.6 33.9 29.7 23.8 14.9 17.0 14.9 13.2 11.9 0.89 53.1 44.3 37.9 33.2 26.6 16.6 19.0 16.6 14.8 13.3 0.98 58.2 48.5 41.6 36.4 29.1 18.2 20.8 18.2 16.2 14.5 1.06 62.9 52.4 44.9 39.3 31.4 19.6 22.5 19.6 17.5 15.7 1.13 67.2 56.0 48.0 42.0 33.6 21.0 24.0 21.0 18.7 16.8 1.20 71.3 59.4 50.9 44.6 35.6 22.3 25.5 22.3 19.8 17.8 1.26 75.1 62.6 53.7 47.0 37.6 23.5 26.8 23.5 20.9 18.8 1.39 82.3 68.6 58.8 51.4 41.2 25.7 29.4 25.7 22.9 20.6

Air Injection Minimizes Drift ®

• TurboDrop XL Nozzle (TDXL) ® 0.17 10.3 8.6 7.3 6.4 5.1 4.3 3.7 3.2 2.9 2.6 • TurboDrop Dual Fan Nozzle (TADF) 0.20 11.9 9.9 8.5 7.4 5.9 4.9 4.2 3.7 3.3 3.0 0.22 13.3 11.1 9.5 8.3 6.6 5.5 4.7 4.1 3.7 3.3

The TurboDrop® XL nozzle is unique among air injection nozzles in that it was designed for contact chemicals, not just glyphosate (a systemic herbicide). The single fan XL can be used in most ag spray applications by choosing the appropriate combination of carrier rate and droplet size. The TwinFan TurboDrop® (TADF) may improve coverage with certain canopy types, or even help target smaller, just emerging weeds. The Ceramic Wear Insert Versions (TDCXL & TDCTF) are generally good for 50,000 to 80,000 acres vs. 20,000 to 30,000 acres for the standard polyacetal versions (TDXL & TDTF).

D

D

TDXL/TDCXL

TADF

TurboDrop® XL Nozzle

Dual Fan Nozzle (10° Forward & 50° Rearward) 40 - 80 PSI Range

TDXLV/TDVC

D

TurboDrop® Venturi Included with Nozzle (Internal portion of Nozzle)

Tabulation Based on Spraying Water at 70° F. F = Fine VF = Very Fine M = Medium C = Coarse VC = Very Coarse XC = Extremely Coarse UC = Ultra Coarse Larger Droplets for Best Drift Control

Pressure Range: 20 to 120 PSI Suggested Spray Height: 18” to 36” (on 20” centers) Material of Construction: TDXL & TADF : Polyacetal & EPDM Gasket TDCXL: Ceramic Wear Insert, EPDM Gasket Part No. GT TDXL11001 thru TDXL11010 GT TDCXL11001 thru TDCXL11010 GT TADF01 thru TADF10

Medium Pressure TurboDrop® Nozzle with Gasket................................... Medium Pressure TurboDrop® Nozzle, Ceramic Wear Insert with Gasket. Medium Pressure Dual Fan Nozzle with Gasket.......................................

DULTMEIER SALES • OMAHA, NE

(800) 228-9666

www.dultmeier.com

• DAVENPORT, IA

CALL for PRICING

(800) 553-6975

E0903


Spray Nozzles

285

Liquid APPLICATION PER ACRE BASED ON 20” NOZZLE SPACING Nozzle Pressure Droplet Flow 5 6 7 8 10 12 14 16 18 20 Number PSI Size GPM mph mph mph mph mph mph mph mph mph mph 30 40 50 TDXL110015-D 60 TDCXL110015-D 70 80 90 100 120

0.13 7.7 6.4 5.5 4.8 3.9 3.2 2.8 2.4 2.1 1.9 0.15 8.9 7.4 6.4 5.6 4.5 3.7 3.2 2.8 2.5 2.2 0.17 10.0 8.3 7.1 6.2 5.0 4.1 3.6 3.1 2.8 2.5 0.18 10.9 9.1 7.8 6.8 5.5 4.5 3.9 3.4 3.0 2.7 0.20 11.8 9.8 8.4 7.4 5.9 4.9 4.2 3.7 3.3 2.9 0.21 12.6 10.5 9.0 7.9 6.3 5.2 4.5 3.9 3.5 3.1 0.22 13.4 11.1 9.5 8.3 6.7 5.6 4.8 4.2 3.7 3.3 0.24 14.1 11.7 10.1 8.8 7.0 5.9 5.0 4.4 3.9 3.5 0.26 15.4 12.9 11.0 9.6 7.7 6.4 5.5 4.8 4.3 3.9

30 UC 40 XC 50 XC TDXL11002-D 60 XC TDCXL11002-D 70 VC 80 VC 90 VC 100 120

0.17 10.3 8.6 7.3 6.4 5.1 4.3 3.7 3.2 2.9 2.6 0.20 11.9 9.9 8.5 7.4 5.9 4.9 4.2 3.7 3.3 3.0 0.22 13.3 11.1 9.5 8.3 6.6 5.5 4.7 4.1 3.7 3.3 0.24 14.5 12.1 10.4 9.1 7.3 6.1 5.2 4.5 4.0 3.6 0.26 15.7 13.1 11.2 9.8 7.9 6.5 5.6 4.9 4.4 3.9 0.28 16.8 14.0 12.0 10.5 8.4 7.0 6.0 5.2 4.7 4.2 0.30 17.8 14.8 12.7 11.1 8.9 7.4 6.4 5.6 4.9 4.5 0.32 18.8 15.6 13.4 11.7 9.4 7.8 6.7 5.9 5.2 4.7 0.35 20.6 17.1 14.7 12.9 10.3 8.6 7.3 6.4 5.7 5.1

30 UC 40 XC 50 XC TDXL110025-D 60 XC TDCXL110025-D 70 VC 80 VC 90 VC 100 120

0.22 12.9 10.7 9.2 8.0 6.4 5.4 4.6 4.0 3.6 3.2 0.25 14.8 12.4 10.6 9.3 7.4 6.2 5.3 4.6 4.1 3.7 0.28 16.6 13.8 11.9 10.4 8.3 6.9 5.9 5.2 4.6 4.1 0.31 18.2 15.1 13.0 11.4 9.1 7.6 6.5 5.7 5.0 4.5 0.33 19.6 16.4 14.0 12.3 9.8 8.2 7.0 6.1 5.5 4.9 0.35 21.0 17.5 15.0 13.1 10.5 8.7 7.5 6.6 45.8 5.2 0.37 22.3 18.5 15.9 13.9 11.1 9.3 7.9 7.0 46.2 5.6 0.40 23.5 19.6 16.8 14.7 11.7 9.8 8.4 7.3 6.5 5.9 0.43 25.7 21.4 18.4 16.1 12.9 10.7 9.2 8.0 7.1 6.4

30 UC 40 UC 50 XC TDXL11003-D 60 XC TDCXL11003-D 70 XC 80 VC 90 VC 100 120

0.26 15.4 12.9 11.0 9.6 7.7 6.4 5.5 4.8 4.3 3.9 0.30 17.8 14.8 12.7 11.1 8.9 7.4 6.4 5.6 4.9 4.5 0.34 19.9 16.6 14.2 12.4 10.0 8.3 7.1 6.2 5.5 5.0 0.37 21.8 18.2 15.6 13.6 10.9 9.1 7.8 6.8 6.1 5.5 0.40 23.6 19.6 16.8 14.7 11.8 9.8 8.4 7.4 6.5 5.9 0.42 25.2 21.0 18.0 15.7 12.6 10.5 9.0 7.9 7.0 6.3 0.45 26.7 22.3 19.1 16.7 13.4 11.1 9.5 8.3 7.4 6.7 0.47 28.2 23.5 20.1 17.6 14.1 11.7 10.1 8.8 7.8 7.0 0.52 30.8 25.7 22.00 19.3 15.4 12.9 11.0 9.6 8.6 7.7

30 UC 40 UC 50 UC TDXL11004-D 60 XC TDCXL11004-D 70 XC 80 XC 90 XC 100 120

0.35 20.6 17.1 14.7 12.9 10.3 8.6 7.3 6.4 5.7 5.1 0.40 23.7 19.8 17.0 14.8 11.9 9.9 8.5 7.4 6.6 5.9 0.45 26.5 22.1 19.0 16.6 13.3 11.1 9.5 8.3 7.4 6.6 0.49 29.1 24.2 20.8 18.2 14.5 12.1 10.4 9.1 8.1 7.3 0.53 31.4 26.2 22.4 19.6 15.7 13.1 11.2 9.8 8.7 7.9 0.57 33.6 28.0 24.0 21.0 16.8 14.0 12.0 10.5 9.3 8.4 0.60 35.6 29.7 25.4 22.3 17.8 14.8 12.7 11.1 9.9 8.9 0.63 37.5 31.3 26.8 23.5 18.8 15.6 13.4 11.7 10.4 9.4 0.69 41.1 34.3 29.4 25.7 20.6 17.1 14.7 12.9 11.4 10.3

30 UC 40 UC 50 UC TDXL11005-D 60 UC TDCXL11005-D 70 UC 80 XC 90 XC 100 120

0.43 25.7 21.4 18.4 16.1 12.9 10.7 9.2 8.0 7.1 6.4 0.50 29.7 24.8 21.2 18.6 14.9 12.4 10.6 9.3 8.3 7.4 0.56 33.2 27.7 23.7 20.8 16.6 13.8 11.9 10.4 9.2 8.3 0.61 36.4 30.3 26.0 22.7 18.2 15.2 13.0 11.4 10.1 9.1 0.66 39.3 32.8 28.1 24.6 19.7 16.4 14.0 12.3 10.9 9.8 0.71 42.0 35.0 30.0 26.3 21.0 17.5 15.0 13.1 11.7 10.5 0.75 44.6 37.1 31.8 27.9 22.3 18.6 15.9 13.9 12.4 11.1 0.79 47.0 39.2 33.6 29.4 23.5 19.6 16.8 14.7 13.1 11.7 0.87 51.5 42.9 36.8 32.2 25.7 21.4 18.4 16.1 14.3 12.9

30 UC 40 UC 50 UC TDXL11006-D 60 UC TDCXL11006-D 70 UC 80 UC 90 UC 100 120

0.52 30.9 25.7 22.1 19.3 15.4 12.9 11.1 9.6 8.6 7.7 0.60 35.7 29.7 25.5 22.3 17.8 14.9 12.7 11.1 9.9 8.9 0.67 39.9 33.2 28.5 24.9 19.9 16.6 14.2 12.5 11.1 10.0 0.74 43.7 36.4 31.2 27.3 21.8 18.2 15.6 13.6 12.1 10.9 0.79 47.2 39.3 33.7 29.5 23.6 19.7 16.8 14.7 13.1 11.8 0.85 50.4 42.0 36.0 31.5 25.2 21.0 18.0 15.8 14.0 12.6 0.90 53.5 44.6 38.2 33.4 26.7 22.3 19.1 16.7 14.9 13.4 0.95 56.4 47.0 40.3 35.2 28.2 23.5 20.1 17.6 15.7 14.1 1.06 61.8 51.5 44.1 38.6 30.9 25.7 22.1 19.3 17.2 15.4

30 40 50 TDXL11008-D 60 TDCXL11008-D 70 80 90 100 120

0.69 41.2 34.3 29.4 25.7 20.6 12.9 14.7 12.9 11.4 10.3 0.80 47.5 39.6 33.9 29.7 23.8 14.9 17.0 14.9 13.2 11.9 0.89 53.1 44.3 37.9 33.2 26.6 16.6 19.0 16.6 14.8 13.3 0.98 58.2 48.5 41.6 36.4 29.1 18.2 20.8 18.2 16.2 14.5 1.06 62.9 52.4 44.9 39.3 31.4 19.6 22.5 19.6 17.5 15.7 1.13 67.2 56.0 48.0 42.0 33.6 21.0 24.0 21.0 18.7 16.8 1.20 71.3 59.4 50.9 44.6 35.6 22.3 25.5 22.3 19.8 17.8 1.26 75.1 62.6 53.7 47.0 37.6 23.5 26.8 23.5 20.9 18.8 1.39 82.3 68.6 58.8 51.4 41.2 25.7 29.4 25.7 22.9 20.6

Medium Pressure TurboDrop® “D” Dicamba Nozzles Air Injection to Minimizes Drift • TurboDrop® XL-D Nozzle • Coarser Droplets for Chemicals Requiring Maximum Drift Control

The D Version of the TurboDrop® XL Nozzles (TDXL-D) were designed with dicamba, 2, 4-D and glyphosate in mind, where a coarser spray droplet is desirable. It is important to remember that as sprays become coarser, coverage may be compromised. Alternating TDXL-D with Dual Fan (TADFD) Nozzles on the boom will help counter the potential loss of coverage by effectively spraying the target four times in one pass. The D Nozzles employ provenTurbo-Drop®Venturi Technology to inject air and create a larger, more uniform droplet spectrum. The pattern tips are larger in comparison to those of the standard XL nozzles, which results in a greater pressure drop and a larger overall droplet size. D Series Nozzles can be converted to standard TurboDrop® Nozzles by switching out the pattern tip(s) for smaller ones in order to make the spray less coarse for contact pesticides. The Ceramic Wear Insert Versions (TDCXL-D) are generally good for 50,000 to 80,000 acres vs.20,000 to 30,000 acres for the standard polyacetal versions.

D

TDXL-D / TDCXL-D TurboDrop® XL Nozzle

D

TDXLV/TDVC

TurboDrop® Venturi Included with Nozzle (Internal portion of Nozzle)

Tabulation Based on Spraying Water at 70° F. F = Fine VF = Very Fine M = Medium C = Coarse VC = Very Coarse XC = Extremely Coarse UC = Ultra Coarse Larger Coarser Droplets Provide Best Drift Control

Pressure Range: 40 to 120 PSI Suggested Spray Height: 18” to 36” (on 20” centers) Material of Construction: TDXL-D: Polyacetal & EPDM Gasket TDCXL-D: Polyacetal, Ceramic Wear Insert, EPDM Gasket Part No. GT TDXL11001-D thru TDXL11010-D GT TDCXL11001-D thru TDCXL11010-D

DULTMEIER SALES • OMAHA, NE

Medium Pressure TurboDrop® Nozzle with Gasket........................... Medium Pressure TurboDrop® Nozzle, Ceramic Wear Insert with Gasket

(800) 228-9666

www.dultmeier.com

• DAVENPORT, IA

CALL For PRICING

(800) 553-6975

E1102


Spray Nozzles

286

Liquid APPLICATION PER ACRE BASED ON 20” NOZZLE SPACING Nozzle Pressure Droplet Flow 5 6 7 8 10 12 14 16 18 20 Number PSI Size GPM mph mph mph mph mph mph mph mph mph mph

Medium Pressure TurboDrop® Dual Fan - “D” Diacamba Nozzles

30 40 50 TADF110015-D 60 70 80 90 100 120

0.13 7.7 6.4 5.5 4.8 3.9 3.2 2.8 2.4 2.1 1.9 0.15 8.9 7.4 6.4 5.6 4.5 3.7 3.2 2.8 2.5 2.2 0.17 10.0 8.3 7.1 6.2 5.0 4.1 3.6 3.1 2.8 2.5 0.18 10.9 9.1 7.8 6.8 5.5 4.5 3.9 3.4 3.0 2.7 0.20 11.8 9.8 8.4 7.4 5.9 4.9 4.2 3.7 3.3 2.9 0.21 12.6 10.5 9.0 7.9 6.3 5.2 4.5 3.9 3.5 3.1 0.22 13.4 11.1 9.5 8.3 6.7 5.6 4.8 4.2 3.7 3.3 0.24 14.1 11.7 10.1 8.8 7.0 5.9 5.0 4.4 3.9 3.5 0.26 15.4 12.9 11.0 9.6 7.7 6.4 5.5 4.8 4.3 3.9

30 UC 40 XC 50 XC TADF11002-D 60 XC 70 VC 80 VC 90 VC 100 120

0.17 10.3 8.6 7.3 6.4 5.1 4.3 3.7 3.2 2.9 2.6 0.20 11.9 9.9 8.5 7.4 5.9 4.9 4.2 3.7 3.3 3.0 0.22 13.3 11.1 9.5 8.3 6.6 5.5 4.7 4.1 3.7 3.3 0.24 14.5 12.1 10.4 9.1 7.3 6.1 5.2 4.5 4.0 3.6 0.26 15.7 13.1 11.2 9.8 7.9 6.5 5.6 4.9 4.4 3.9 0.28 16.8 14.0 12.0 10.5 8.4 7.0 6.0 5.2 4.7 4.2 0.30 17.8 14.8 12.7 11.1 8.9 7.4 6.4 5.6 4.9 4.5 0.32 18.8 15.6 13.4 11.7 9.4 7.8 6.7 5.9 5.2 4.7 0.35 20.6 17.1 14.7 12.9 10.3 8.6 7.3 6.4 5.7 5.1

30 UC 40 XC 50 XC TADF110025-D 60 XC 70 VC 80 VC 90 VC 100 120

0.22 12.9 10.7 9.2 8.0 6.4 5.4 4.6 4.0 3.6 3.2 0.25 14.8 12.4 10.6 9.3 7.4 6.2 5.3 4.6 4.1 3.7 0.28 16.6 13.8 11.9 10.4 8.3 6.9 5.9 5.2 4.6 4.1 0.31 18.2 15.1 13.0 11.4 9.1 7.6 6.5 5.7 5.0 4.5 0.33 19.6 16.4 14.0 12.3 9.8 8.2 7.0 6.1 5.5 4.9 0.35 21.0 17.5 15.0 13.1 10.5 8.7 7.5 6.6 45.8 5.2 0.37 22.3 18.5 15.9 13.9 11.1 9.3 7.9 7.0 46.2 5.6 0.40 23.5 19.6 16.8 14.7 11.7 9.8 8.4 7.3 6.5 5.9 0.43 25.7 21.4 18.4 16.1 12.9 10.7 9.2 8.0 7.1 6.4

30 UC 40 UC 50 XC TADF11003-D 60 XC 70 XC 80 VC 90 VC 100

0.26 15.4 12.9 11.0 9.6 7.7 6.4 5.5 4.8 4.3 3.9 0.30 17.8 14.8 12.7 11.1 8.9 7.4 6.4 5.6 4.9 4.5 0.34 19.9 16.6 14.2 12.4 10.0 8.3 7.1 6.2 5.5 5.0 0.37 21.8 18.2 15.6 13.6 10.9 9.1 7.8 6.8 6.1 5.5 0.40 23.6 19.6 16.8 14.7 11.8 9.8 8.4 7.4 6.5 5.9 0.42 25.2 21.0 18.0 15.7 12.6 10.5 9.0 7.9 7.0 6.3 0.45 26.7 22.3 19.1 16.7 13.4 11.1 9.5 8.3 7.4 6.7 0.47 28.2 23.5 20.1 17.6 14.1 11.7 10.1 8.8 7.8 7.0

30 UC 40 UC 50 XC TADF11004-D 60 XC 70 XC 80 XC 90 VC 100 120

0.35 20.6 17.1 14.7 12.9 10.3 8.6 7.3 6.4 5.7 5.1 0.40 23.7 19.8 17.0 14.8 11.9 9.9 8.5 7.4 6.6 5.9 0.45 26.5 22.1 19.0 16.6 13.3 11.1 9.5 8.3 7.4 6.6 0.49 29.1 24.2 20.8 18.2 14.5 12.1 10.4 9.1 8.1 7.3 0.53 31.4 26.2 22.4 19.6 15.7 13.1 11.2 9.8 8.7 7.9 0.57 33.6 28.0 24.0 21.0 16.8 14.0 12.0 10.5 9.3 8.4 0.60 35.6 29.7 25.4 22.3 17.8 14.8 12.7 11.1 9.9 8.9 0.63 37.5 31.3 26.8 23.5 18.8 15.6 13.4 11.7 10.4 9.4 0.69 41.1 34.3 29.4 25.7 20.6 17.1 14.7 12.9 11.4 10.3

30 UC 40 UC 50 XC TADF11005-D 60 XC 70 XC 80 XC 90 VC 100 120

0.43 25.7 21.4 18.4 16.1 12.9 10.7 9.2 8.0 7.1 6.4 0.50 29.7 24.8 21.2 18.6 14.9 12.4 10.6 9.3 8.3 7.4 0.56 33.2 27.7 23.7 20.8 16.6 13.8 11.9 10.4 9.2 8.3 0.61 36.4 30.3 26.0 22.7 18.2 15.2 13.0 11.4 10.1 9.1 0.66 39.3 32.8 28.1 24.6 19.7 16.4 14.0 12.3 10.9 9.8 0.71 42.0 35.0 30.0 26.3 21.0 17.5 15.0 13.1 11.7 10.5 0.75 44.6 37.1 31.8 27.9 22.3 18.6 15.9 13.9 12.4 11.1 0.79 47.0 39.2 33.6 29.4 23.5 19.6 16.8 14.7 13.1 11.7 0.87 51.5 42.9 36.8 32.2 25.7 21.4 18.4 16.1 14.3 12.9

30 UC 40 UC 50 UC TADF11006-D 60 XC 70 XC 80 XC 90 XC 100 120

0.52 30.9 25.7 22.1 19.3 15.4 12.9 11.1 9.6 8.6 7.7 0.60 35.7 29.7 25.5 22.3 17.8 14.9 12.7 11.1 9.9 8.9 0.67 39.9 33.2 28.5 24.9 19.9 16.6 14.2 12.5 11.1 10.0 0.74 43.7 36.4 31.2 27.3 21.8 18.2 15.6 13.6 12.1 10.9 0.79 47.2 39.3 33.7 29.5 23.6 19.7 16.8 14.7 13.1 11.8 0.85 50.4 42.0 36.0 31.5 25.2 21.0 18.0 15.8 14.0 12.6 0.90 53.5 44.6 38.2 33.4 26.7 22.3 19.1 16.7 14.9 13.4 0.95 56.4 47.0 40.3 35.2 28.2 23.5 20.1 17.6 15.7 14.1 1.06 61.8 51.5 44.1 38.6 30.9 25.7 22.1 19.3 17.2 15.4

TADF11008-D

0.69 41.2 34.3 29.4 25.7 20.6 12.9 14.7 12.9 11.4 10.3 0.80 47.5 39.6 33.9 29.7 23.8 14.9 17.0 14.9 13.2 11.9 0.89 53.1 44.3 37.9 33.2 26.6 16.6 19.0 16.6 14.8 13.3 0.98 58.2 48.5 41.6 36.4 29.1 18.2 20.8 18.2 16.2 14.5 1.06 62.9 52.4 44.9 39.3 31.4 19.6 22.5 19.6 17.5 15.7 1.13 67.2 56.0 48.0 42.0 33.6 21.0 24.0 21.0 18.7 16.8 1.20 71.3 59.4 50.9 44.6 35.6 22.3 25.5 22.3 19.8 17.8 1.26 75.1 62.6 53.7 47.0 37.6 23.5 26.8 23.5 20.9 18.8 1.39 82.3 68.6 58.8 51.4 41.2 25.7 29.4 25.7 22.9 20.6

30 40 50 60 70 80 90 100 120

Air Injection to Minimize Drift

• TurboDrop® Dual Fan-D (TADF-D)

• Coarser Droplets for Chemicals Requiring Maximum Drift Control The D Version of the TurboDrop® Dual Fan Nozzles(TADF-D) were designed with dicamba, 2, 4-D and glyphosate in mind, where a coarser spray droplet is desirable. The D Nozzles employ provenTurbo-Drop®Venturi Technology to inject air and create a larger, more uniform droplet spectrum.The pattern tips are larger in comparison to those of the standard Dual Fan nozzles, which results in a greater pressure drop and a larger overall droplet size. D Series Nozzles can be converted to standard Dual Fan Nozzles by switching out the pattern tip(s) for smaller ones in order to make the spray less coarse for contact pesticides. The Ceramic Wear Insert Versions (TACDF-D) are generally good for 50,000 to 80,000 acres vs. 20,000 to 30,000 acres for the standard polyacetal versions (TDXL & TDTF). Note: Rotate every other nozzle (10° forward then 10° backward) along boom for best coverage.

D

TADF-D / TACDF-D

Dual Fan Nozzle (10° Forward & 50° Rearward) 40 - 80 PSI Range Best 110° Wide

TDXLV/TDVC

D

TurboDrop® Venturi Included with Nozzle (Internal portion of Nozzle)

Tabulation Based on Spraying Water at 70° F. F = Fine VF = Very Fine M = Medium C = Coarse VC = Very Coarse XC = Extremely Coarse UC = Ultra Coarse Larger Coarser Droplets Provide Best Drift Control

Pressure Range: 40 to 120 PSI Suggested Spray Height: 18” to 36” (on 20” centers) Material of Construction: TADF-D : Polyacetal & EPDM Gasket TACDF-D: Polyacetal, Ceramic Wear Insert, EPDM Gasket Part No. GT TADF01-D thru TADF08-D GT TACDF01-D thru TACDF08-D

Medium Pressure Dual Fan Nozzle with Gasket....................................... Medium Pressure Dual Fan Nozzle, Ceramic Wear Insert with Gasket.....

DULTMEIER SALES • OMAHA, NE

(800) 228-9666

www.dultmeier.com

• DAVENPORT, IA

CALL for PRICING

(800) 553-6975

E1101


Spray Nozzles

287

TDVR TWVR APPLICATION RATE GPA at MPH BASED ON 20” SPACING Nozzle # Pressure Droplet Droplet Flow 4 5 6 8 10 12 14 16 18 20 PSI Size Size GPM mph mph mph mph mph mph mph mph mph mph

40 XC TDVR015 50 VC 60 VC TWVR015 70 C 80 M 90 M 100 M

VC VC C C M M F

0.17 12.6 10.1 8.4 6.3 5.0 4.2 3.6 3.2 2.8 2.5 0.22 16.3 13.1 10.9 8.2 6.5 5.4 4.7 4.1 3.6 3.3 0.27 20.0 16.0 13.4 10.0 8.0 6.7 5.7 5.0 4.5 4.0 0.33 24.5 19.6 16.3 12.3 9.8 8.2 7.0 6.1 5.4 4.9 0.38 28.2 22.6 18.8 14.1 11.3 9.4 8.1 7.1 6.3 5.6 0.42 31.2 24.9 20.8 15.6 12.5 10.4 8.9 7.8 6.9 6.2 0.45 33.4 26.7 22.3 16.7 13.4 11.1 9.5 8.4 7.4 6.7

40 XC TDVR02 50 XC 60 VC TWVR02 70 C 80 C 90 M 100 M

VC VC C C M M F

0.22 16.3 13.1 10.9 8.2 6.5 5.4 4.7 4.1 3.6 3.3 0.29 21.5 17.2 14.4 10.8 8.6 7.2 6.2 5.4 4.8 4.3 0.42 31.2 24.9 20.8 15.6 12.5 10.4 8.9 7.8 6.9 6.2 0.51 37.9 30.3 25.2 18.9 15.1 12.6 10.8 9.5 8.4 7.6 0.58 43.1 34.5 28.7 21.5 17.2 14.4 12.3 10.8 9.6 8.6 0.64 47.5 38.0 31.7 23.8 19.0 15.8 13.6 11.9 10.6 9.5 0.69 51.2 41.0 34.2 25.6 20.5 17.1 14.6 12.8 11.4 10.2

40 XC TDVR03 50 XC 60 VC TWVR03 70 VC 80 C 90 C 100 M

VC VC C C M M F

0.33 24.5 19.6 16.3 12.3 9.8 8.2 7.0 6.1 5.4 4.9 0.41 30.4 24.4 20.3 15.2 12.2 10.1 8.7 7.6 6.8 6.1 0.51 37.9 30.3 25.2 18.9 15.1 12.6 10.8 9.5 8.4 7.6 0.67 49.7 39.8 33.2 24.9 19.9 16.6 14.2 12.4 11.1 9.9 0.80 59.4 47.5 39.6 29.7 23.8 19.8 17.0 14.9 13.2 11.9 0.87 64.6 51.7 43.1 32.3 25.8 21.5 18.5 16.1 14.4 12.9 0.93 69.1 55.2 46.0 34.5 27.6 23.0 19.7 17.3 15.3 13.8

40 0.78 57.9 46.3 38.6 29.0 23.2 19.3 16.5 14.5 12.9 11.6 TDVR05 50 0.98 72.8 58.2 48.5 36.4 29.1 24.3 20.8 18.2 16.2 14.6 60 1.15 85.4 68.3 56.9 42.7 34.2 28.5 24.4 21.3 19.0 17.1 TWVR05 70 TBD TBD 1.33 98.8 79.0 65.8 49.4 39.5 32.9 28.2 24.7 21.9 19.8 80 1.45 107.7 86.1 71.8 53.8 43.1 35.9 30.8 26.9 23.9 21.5 90 1.57 116.6 93.3 77.7 58.3 46.6 38.9 33.3 29.1 25.9 23.3 100 1.69 125.5 100.4 83.7 62.7 50.2 41.8 35.9 31.4 27.9 25.1 Tabulation Based on Spraying Water at 70° F. F = Fine VF = Very Fine M = Medium C = Coarse VC = Very Coarse XC = Extremely Coarse

TurboDrop® Variable Rate Nozzles TurboDrop® Variable Rate Nozzles (110° Flat Fan) will cover the range of three to four standard TurboDrop® nozzle sizes. The flow rate increases more rapidly with an increase in pressure, making variable rate nozzles useful in covering wider speed ranges or providing on-the-go variable rate application. As with all ag spray nozzles, it is important to match droplet size to the application type.The TwinFan Variable Rate (Twin 110° Flat Fans) will provide a smaller droplet size spectrum compared to the single fan version, as well as deliver dual spray coverage.

D

D

D

Larger Droplets for Best Drift Control

• • • • • •

3 Times Flow Rate at Constant Speed (variable rate applications) 3 Times Speed Range at Constant GPA Rate (variable speed applications) Flow Tolerance ± 10% to 15% Use Flow Control Systems with Meters for Best Accuracy Operate Above 45 PSI for Best Pattern Tabulations Based On Spraying Water at 70° F.

Part No. GT TDVR015 thru GT TDVR05 GT TWVR015 thru GT TWVR05 GT TDVRHB015 thru GT TDVRHB05 GT TDVRF015 thru GT TDVRF05 GT TDVREX015 thru GT TDVREX05

TurboDrop® Variable Rate Nozzles, 110° Fan........................ TurboDrop® Variable Rate Nozzles, Twin 110° Fans.............. TurboDrop® Variable Rate Hose Barb (3/8”) Nozzle.............. TurboDrop® Variable Rate Nozzles, 6” Hole Stream.............. TurboDrop® Variable Rate Nozzles With QuickJet Extension

TDVR015

TWVR015

TDVRHB015

Pressure Range: 40 to 140 PSI

TDVREX03

Recommended Boom Height: 18” to 36” (on 20” centers)

CALL FOR CURRENT PRICING

Material of Construction: Polyacetal & EPDM

AI3070

Air Induction Nozzles for Fusarium Head Blight in Wheat AI3070 TeeJet Nozzles feature a dual pattern 30 forward, 70 backward, designed specifically for fungicide application on cereal crops. 30 Forward pattern penetrates dense canopy, 70 backward pattern covers crop seed head. Acetal polymer material. Includes CP98578-1NY black auto alignment cap and 19438 EPDM included. (Viton® is extra). Use 100 Mesh filter on .015 size, 50M on other sizes. Drift-resistant droplet size not available.

D

D D

AI3070 Air Induction Nozzles Features: • Produces two wide angle, flat spray patterns for uniform coverage in broadcast applications.

• All acetal construction for excellent chemical & wear resistance.

AI3070 - Air Induction Nozzles for Fusarium Head

• 30° Forward tilted spray penetrates dense crop canopies, while the backward tilted 70° spray maximizes coverage of the crop seed head.

• Removable pre-orifice for fast & easy cleaning.

AI3070-015VP AI3070-02VP AI3070-025VP AI3070-03VP AI3070-04VP AI3070-05VP

• Drift resistant drops are produced through the use of a venturi air aspirator • Large round free passages minimize clogging. Part No. Filter GPM @ 40 PSI

• Automatic alignment with the use of CP98578-1NY cap. • Suggested spray pressure range of 20 to 90 PSI. • NOTE: Price Includes Auto Align Cap & EPDM Gasket.

20” Spacing GPA @ 12 MPH

30 PSI 40 PSI 50 PSI 60 PSI 70 PSI 80 PSI

C C M M M M VC C C C M M VC C C C C C XC C C C C C XC VC VC VC C C XC VC VC VC VC C

Net Ea.

SS AI3070-015VP 100 .12 3.7 $ 6.18 SS AI3070-02VP 50 .20 5.0 6.18 SS AI3070-025VP 50 .25 6.2 6.18 SS AI3070-03VP 50 .30 7.4 6.18 SS AI3070-04VP 50 .40 9.9 6.18 SS AI3070-05VP 50 .50 12.4 6.18 SS 19438EPR * EPDM Gasket....................................................... .56 SS 19438VI Viton® Gasket....................................................... 1.45 * Cap & Gasket Included. TeeJet Packaged in 25’s. 10% Quantity Discount on 50+ Of One Size Viton® is a registered trademark of DuPont Performance Elastomers

DULTMEIER SALES • OMAHA, NE

(800) 228-9666

www.dultmeier.com

• DAVENPORT, IA

(800) 553-6975

E0899


288

Combo-Jet® Nozzles Combo-Jet® 110 Degree Flat Fan Nozzles The Combo-Jet® Tip-Cap with Its Snap-In Strainer is Easier to Clean and Stays Clean Longer

• Stainless steel tip is a permanent part of the cap. • Snap-in strainer is longer with 40% more area to reduce tip plugging. It can be cleaned without removing from the Tip-Cap, which reduces the potential for debris dislodged during cleaning to plug the tip.

• The Tip-Cap, strainer and seal stay assembled when you change nozzles, which makes them easier to handle and store. • Radialock cap design secures cap in place, so it is less likely to get knocked off and it doesn’t over-compress the seal. • 110° Degree Flat Fan Pattern

Combo-Jet 110° Flat Fan Nozzles

Part No. Description WL ER110-01 thru ER110-30 110° Flat Fan Nozzle, Extended Range.............. WL SR110-01 thru SR110-30 110° Flat Fan Nozzle, Small Drop....................... WL MR110-01 thru MR110-30 110° Flat Fan Nozzle, Mid Range....................... WL DR110-10 thru DR110-30 110° Flat Fan Nozzle, Drift Control..................... WL 40269-05 Combo-Jet Cap, Slotted for 3/8” Nozzles....................................... WL 40271-05 Combo-Jet Cap for 1/2” Round Nozzles........................................ WL 40276-05 Combo-Jet Cap for Wide 7/16” Nozzles......................................... WL 40250-00 50 Mesh Strainer........................................................................... WL 40260-00 Gasket for Combo-Jet Cap, Buna.................................................. WL 40260-V0 Gasket for Combo-Jet Cap, Viton®................................................ DULTMEIER SALES • OMAHA, NE

(800) 228-9666

www.dultmeier.com

• DAVENPORT, IA

CALL for PRICING

(800) 553-6975

E1061


Technical Spraying Information Technical Information: Spray Nozzles Broadcast Applications:

GPM = (Per Nozzle)

GPM: Gallons Per Minute GPA: Gallons Per Acre mph: Miles Per Hour W: Nozzle spacing (in inches) for broadcast spraying • Spray width (in inches) for single nozzle, band spraying or boomless spraying. • Row spacing (in inches) divided by the number of nozzles per row for directed spraying.

GPA x mph x W 5,940

GPA = 5,940 x GPM (Per Nozzle) mph x W

Multiple Nozzles Over the Row

FORMULA (1):

To determine the gallons per minute (GPM) capacity required for each spray tip to band agrichemicals in a multiple nozzle application.

(

GPM (Per Nozzle) = GPA x MPH x W 5940

Band Spraying Application GPA Formulas Do not confuse band applications with cutting recommended gallon per acre rates. The rate applied on a Banding basis is normally the same rate recommended for broadcast applications. Banding of agricultural chemicals allows for increased acreage to be covered with the same tank volume by reducing the area being treated. Multiple nozzles over the row applications are calculated similar to a single nozzle banding except the flow calculated by the formula should then be divided by the quantity of nozzles producing the band.

Where: FORMULA (2):

289

GPA MPH W N

= = = =

(

÷ N

Gallons per Acre (Application) Rate Actual field speed in Miles Per Hour Band width inches Number of nozzles producing the Band.

To determine the gallons per Acre (GPA) on treated spray band:

GPA (Treated Band) = (GPM x N) x 5940 MPH x W Where: FORMULA (3):

GPA MPH W N

= = = =

Gallons Per Acre (Application) Rate Actual field speed in Miles Per Hour Band width inches Number of nozzles producing the Band.

To determine the gallons of solution used over the actual Field Acre:

GPA (Field Acre) = GPA (Treated Band)

x

Band Width Row Spacing

Technical Information SPRAYING SOLUTIONS OTHER THAN WATER - NEW METHOD

SUGGESTED MINIMUM SPRAY HEIGHTS

Since all the tabulations are based on spraying water, which weighs 8.34 lbs. per USA gallon, conversion factors must be used when spraying solutions which are heavier or lighter than water. To determine the proper size nozzle for the solution to be sprayed, first convert the desired GPM or GPA of solution to a water rate using the conversion factors. Use the new converted GPM or GPA rate to select the proper size nozzle.

Specific Conversion Weight of Solution Gravity Factors 7.0 lbs. per gallon .84 .92 8.0 lbs. per gallon .96 .98 8.34 lbs. per gallon-WATER 1.00 1.00 9.0 lbs. per gallon 1.08 1.04 10.0 labs. per gallon 1.20 1.09 10.65 lbs. per gallon-28% nitrogen 1.28 1.12 11.0 lbs. per gallon 1.32 1.14 12.0 lbs. per gallon 1.44 1.20 14.0 lbs. per gallon 1.68 1.29

* Not Recommended. ** Nozzle height based on 30° to 45° angle of orientation. *** Wide angle spray tip height is influenced by nozzle orientation. The critical factor is to achieve a double spray pattern overlap.

SPRAY COVERAGE INFORMATION This table lists the theoretical coverage of spray patterns as calculated from the included spray angle of the spray and the distance from the nozzle orifice. These values are based on the assumption that the spray angle remains the same throughout entire spray distance. In actual practice, the tabulated spray angle does not hold for long spray distances.

NOZZLE SPACING

If the nozzle spacing on your boom is different than those tabulated, multiply the tabulated a coverages by one of the following factors:

THEORETICAL SPRAY COVERAGE AT VARIOUS SPRAY HEIGHTS (AT 40 PSI)

Where Tables Are Based on 20" Nozzle Spacing Other Spacing

8" 10" 12" 14" 16" 18" 22" 24" 30"

Conversion Factor

2.5 2 1.67 1.43 1.25 1.11 .91 .83 .66

65˚ 80˚ 110˚ Spray Spray Spray Spray Height Angle Angle Angle (inches) (inches) (inches) (inches) 6 7.6 10.1 17.1 9 11.5 15.1 25 12 15.3 20 34 15 19.1 25 42 18 23 30 51 21 27 35 60 24 31 40 68 27 34 45 77 30 38 50 85 33 42 55 94 36 46 60 103

Where Tables Are Based on 40" Nozzle Spacing Other Spacing

28" 30" 32" 34" 36" 38" 42" 44" 48"

Conversion Factor

1.43 1.33 1.25 1.18 1.11 1.05 .95 .91 .83

DULTMEIER SALES • OMAHA, NE

(800) 228-9666

www.dultmeier.com

• DAVENPORT, IA

(800) 553-6975

E0827


Boomless & Boom X Tender® Nozzles

290

Boom X Tender® Nozzles

Boomless Nozzles for Wide Spray Applications

Hypro Boom X Tender® Nozzles are designed for off-center and boomless spraying on roadsides, right of ways, pastures, deicing, etc. Large droplet spray. D Mount and test at 36" nozzle height at 3060 psi. Tip strainers not necessary but will require a coarse inline strainer. Adjust above or below horizontal for proper performance. 316 Stainless Steel body and orifice with polyacetal tip generator. For Repair Kits Order — GIOKIT (i.e. XT080-G10KIT).

Brass Boomless Nozzles are available in three styles involving a combination of tips to provide full pattern coverage up to 60 feet. The 5880 Version has five fixed nozzles in four capacities. Includes an extra 1/4" port and one blank tip for setting the spray pattern to one side only. 3/4" FPT back inlet connection. Specify Size Numbers. The 4629 Single Swivel Nozzle is adjustable with a single OC tips and plugged ports. The 5430 Version has two OC tips and will have twice the capacity of the chart tabulations for the 4629 Nozzle. 3/4" top inlet connection. Specify Size Numbers. CP3819

4629-3/4-TOC

3/4" Cap

Single Swivel Brass

Stainless Steel

Polyacetal

Flow rates = .9 - 26.3 gpm at 30 - 60 psi

95°

D D

Medium-Coarse Droplets

D 15°

5880-3/4" NPT Female Back Inlet Connection D

5430-3/4-2TOC Double Swivel Brass

D

CP3817 3/4" FPT Body

W = Maximum effective coverage with nozzle mounted at 36" height.

CP3818 3/4" MPT Body

BoomJet Nozzle No.

OC Tips (Two)

VeeJet Top Nozzles (Two)

VeeJet Bottom Nozzle

Liquid Total “W” Gallons Per Acre Press. Capac. In 5 10 15 PSI GPM Feet MPH MPH MPH

5880-3/4-2T06 6733-OC06 H1/4VV-1506 H1/4VVL-9502 20 with 50 Mesh 30 Strainer 40

1.84 33.5 5.4 2.7 1.8 2.25 34.0 6.6 3.3 2.2 2.60 34.5 7.5 3.7 2.5

5880-3/4-2T10 OC10 H1/4U-0508HE H1/4VVL-11004 20 with 50 Mesh 30 Strainer 40

2.83 39.5 7.1 3.5 2.4 3.46 40.0 8.6 4.3 2.9 4.00 40.5 9.8 4.9 3.3

5880-3/4-2T20 OC20 H1/4U-0520HE H1/4VVL-9506 20 with 50 Mesh 30 Strainer 40

6.08 47.0 12.8 6.4 4.3 7.45 50.0 14.8 7.4 4.9 8.60 52.0 16.4 8.2 5.5

5880-3/4-2T40 OC40 H1/4U-0540HE H1/4U-9510 20 12.0 56.0 21 10.6 7.1 30 14.7 60.0 24 12.1 8.1 40 17.0 63.0 27 13.4 8.9 W = Maximum effeective coverage with nozzle mounted at 36" height.

TeeJet 3/4" NPT Spray Height "H" = 36" Off-Center Liquid Nozzle “W” Gallons Per Acre Single Swivel Press. Capacity In 5 10 15 Nozzle No. PSI GPM Feet MPH MPH MPH 4629-3/4-TOC10

30 40 60

0.87 1.00 1.22

18 4.8 2.4 1.6 18.5 5.4 2.7 1.8 18.5 6.5 3.3 2.2

4629-3/4-TOC20

30 40 60

1.73 2.00 2.45

23.5 7.3 3.6 2.4 24.5 8.1 4.0 2.7 24.5 9.9 5.0 3.3

4629-3/4-TOC40

30 40 60

3.46 4.00 4.90

26.0 13.2 6.6 4.4 27.0 14.7 7.3 4.9 27.0 18.0 9.0 6.0

Part No. Net Ea. TW XT043 $ 67.30 TW XT080 67.30 TW XT167 75.20 TW XT215 75.20

Fast Cap Boom X Tender® Nozzles

4629-3/4-TOC150 30 13.0 30.5 42 21.0 14.1 40 15.0 31.5 47 24.0 15.7 60 18.4 31.5 58 29.0 19.3 4629-3/4-TOC300 30 26.0 32.0 80 40.0 27.0 40 30.0 33.0 90 45.0 30.0 60 36.7 33.5 108 54.0 36.0

Part No. Boomless Nozzles: Net Ea. SS 5880 Brass BoomJet Nozzle.................................... $ 150.20 SS 4629 Brass Single BoomJet Nozzle......................... 99.25 SS 5430 Brass Double BoomJet Nozzle........................ 133.20 SS 6733-OC06 thru SS OC16 Replacement Off Center Tips.. 6.43 SS OC01 - SS OC16 Small TeeJet Off Center Tips, Brass...... 6.43 SS OCSS01 - SS OCSS16 Small TeeJet Off Center Tips, SS.9 9.50 SS OC10 - SS OC300 Large 3/4" Off Center Tips, Brass ....... 32.35 SS OCSS10 - SS OCSS300 Small TeeJet Off Center Tips, SS. 52.40 SS CP5539 Brass 3/4" Blank.............................................. 1.15 SS CP3817 3/4" FPT Brass Body....................................... 14.95 SS CP3818 3/4" MPT Brass Body...................................... 14.95 SS CP3819 3/4" Brass Replacement Cap.......................... 8.67

(800) 228-9666

Nozzle # Water Gallons Per Acre & Effective Miles Per Hour MPT PSI Distance PSI GPM 5 8 10 12 15 20 30 0.9 7.1 4.5 3.6 3.0 2.4 1.8 XT010 40 1.0 7.9 5.0 4.0 3.3 2.6 2.0 1/4" 30-60 Green 50 1.1 8.7 5.4 4.4 3.6 2.9 2.2 13’ 60 1.2 9.5 5.9 4.8 4.0 3.2 2.4 30 1.3 8.7 5.4 4.4 3.6 2.9 2.2 XT015 40 1.5 10.0 6.3 5.0 4.2 3.4 2.5 1/4” 30-60 Lt. Green 50 1.7 11.0 6.9 5.5 4.6 3.7 2.8 14’ 60 1.8 12.0 7.5 6.0 5.0 4.0 3.0 30 1.7 10.9 6.8 5.4 4.5 3.6 2.7 XT020 40 2.0 12.8 8.0 6.4 5.3 4.3 3.2 Blue 1/4” 30-60 50 2.2 14.1 8.8 7.0 5.9 4.7 3.5 15’ 60 2.4 15.3 9.6 7.7 6.4 5.1 3.8 30 2.1 13.0 8.1 6.5 5.4 4.3 3.2 XT024 40 2.4 14.9 9.3 7.4 6.2 5.0 3.7 Yellow 1/4” 30-60 50 2.7 16.7 10.4 8.4 7.0 5.6 4.2 16’ 60 2.9 17.9 11.2 9.0 7.5 6.0 4.5 30 3.7 25.3 15.8 12.6 10.5 8.4 6.3 XT043 40 4.3 29.4 18.3 14.7 12.2 9.8 7.3 Orange 3/8” 30-60 50 4.8 32.8 20.5 16.4 13.7 10.9 8.2 14’ 60 5.3 36.2 22.6 18.1 15.1 12.1 9.0 30 6.9 54.6 34.2 27.3 22.8 18.2 13.7 XT080 40 8.0 63.4 39.6 31.7 26.4 21.1 15.8 Red 1/2” 30-60 50 8.9 70.5 44.1 35.2 29.4 23.5 17.6 13’ 60 9.8 77.6 48.5 38.8 32.3 25.9 19.4 30 14.5 103 64.1 51.3 42.7 34.2 25.6 XT167 40 16.7 118 73.8 59 49.2 39.4 29.5 White 3/4” 30-60 50 18.7 132 82.6 66.1 55.1 44.1 33.1 15’ 60 20.5 145 90.6 72.5 60.4 48.3 36.2 30 18.6 115 71.9 57.5 48 38.4 28.8 XT215 40 21.5 133 83.1 66.5 55.4 44.3 33.3 3/4” 30-60 Gray 50 24.0 149 92.8 74.3 61.9 49.5 37.1 16’ 60 26.3 163 102 81.4 67.8 54.2 40.7 Note: Application rates are based on overall swath widths listed at 48” height. Refer to operating instructions if using a different swath.

Part No. Net Ea. TW XT010 $ 56.75 TW XT015 37.25 TW XT020 57.95 TW XT024 57.95

4629-3/4-TOC80 30 6.93 29.0 24 11.8 7.9 40 8.00 30.0 26 13.2 8.8 60 9.80 30.0 32 16.2 10.8

DULTMEIER SALES • OMAHA, NE

Distances = 12 - 21 feet

Fast Caps include polyacetal tip and cap with gasket. Presently available in the 20, 24 and 43 sizes. Application chart above applies.

D D

Part No. Net Ea. TW FCXT020 $ 38.20 TW FCXT024 38.20 TW FCXT043 46.40

www.dultmeier.com

• DAVENPORT, IA

(800) 553-6975

E0369


Boomless Spray Nozzles

291

STANDARD NOZZLE APPLICATION CHART

BOOM BUSTER Nozzles

GALLONS PER ACRE (Water used for all calculations) EFF. NOZZLE 1 2 3 4 5 6 7 MODEL PSI GPM DIST. ANGLE mph mph mph mph mph mph mph 125 & 125R 30 1.7 15.5 Level 54 27 18 13 11 9 7.8 Stainless Boom Buster Nozzles are designed 1/4" 40 2.0 15.5 Level 64 32 21 16 13 11 9.1 for roadside & right of way use with chemicals and 5 6 7 8 9 10 11 12 13 14 15 fertilizers and deicing liquids on roads and bridges. mph mph mph mph mph mph mph mph mph mph mph They work well where off center tips are required 140 & 140R 30 2.0 16.5 Level 12 10 8.5 7.5 6.7 6 5.5 5 4.6 4.3 4 for clear liquids and suspensions. Can be used as 1/4" 40 2.4 16.5 Level 14 12 10 9 8 7 6.5 6 5.5 5.1 4.8 50 2.7 16.5 Level 16 14 12 10 9 8 7.4 6.8 6.2 5.8 5.4 singles or in a two or three nozzle combination for 187 & 187R 30 3.6 18.5 Level 19 16 14 12 11 9.6 8.8 8 7.4 6.9 6.4 selected coverage. Select nozzles for use at 30-50 3/8" 40 4.3 18.5 Level 23 19 16 14 13 12 11 9.6 8.9 8.2 7.7 psi for 1.7 to 37 GPM at distances of 3 to 30 feet. 50 4.8 18.5 Level 26 21 18 16 14 13 12 11 10 9.2 8.6 Effective distance shown based on 36" mounting 265 & 265R 30 6.8 19.5 Level 35 29 25 22 19 17 16 14 13 12 11 1/2" 40 8.0 19.5 Level 41 34 29 25 23 20 18 17 15 14 13 height. Nylon diffuser vane. 50 8.8 19.5 Level 45 37 32 28 25 22 20 19 17 16 15 The nozzles shown carry an "R" designation which 375 & 375R 30 14.4 21.5 Level 66 55 47 41 37 33 30 28 26 24 22 D is correct for right of way spraying. For two nozzles 3/4" 40 16.7 21.5 Level 77 64 55 48 43 38 35 32 30 27 26 mounted back to back, use standard numbers 50 18.8 21.5 Level 87 72 62 54 48 43 39 36 33 31 29 437 & 437R 30 18.5 29.5 Up 62 52 44 39 34 31 28 26 24 22 21 (less R) to insure center overlap. (see picture). 3/4" 40 21.5 29.5 Up 72 60 52 45 40 36 33 30 28 26 24 50 24.2 29.5 Up 81 68 58 51 45 41 37 34 31 29 27 4 6 8 10 12 14 16 18 20 22 24 26 28 30 mph mph mph mph mph mph mph mph mph mph mph mph mph mph 500 & 500R 30 29 20 Level 179 120 90 72 60 51 45 40 36 33 30 28 26 24 1" 40 33 20 Level 204 136 102 82 68 58 51 45 41 37 24 31 29 27 50 37 20 Level 229 153 114 91 76 65 57 51 46 41 38 35 33 30 Typical standard two nozzle installation showing center overlap. 4 6 8 10 12 14 16 18 20 22 24 26 28 30 mph mph mph mph mph mph mph mph mph mph mph mph mph mph 504 & 504R 30 29 40 Up 179 120 90 72 60 51 45 40 36 33 30 28 26 24 1" 40 33 40 Up 204 136 102 82 68 58 51 45 41 37 24 31 29 27 50 37 40 Up 229 153 114 91 76 65 57 51 46 41 38 35 33 30 18" EFFECTIVE DISTANCE

EFFECTIVE DISTANCE

Boomless Flat Spray Nozzles

In multiple pass spraying, the end of the pattern should overlap approximately 18".

Features:

NARROW BAND NOZZLE APPLICATION CHART GALLONS PER ACRE (Water used for all calculations) EFF. NOZZLE 5 6 7 8 9 10 11 12 13 14 15 MODEL PSI GPM DIST. ANGLE mph mph mph mph mph mph mph mph mph mph mph 120-3 30 1.7 3 Down 56 47 40 35 31 28 25 23 22 20 19 120-3R 40 2.0 3 Down 66 55 47 41 37 33 30 27 25 23 22 1/4" 50 2.2 3 Down 73 61 52 45 40 36 33 30 28 26 24 120-5 30 1.7 5 Down 34 28 24 21 19 17 15 14 13 12 11 120-5R 40 2.0 5 Down 40 33 28 25 22 20 18 17 15 14 13 1/4" 50 2.2 5 Down 44 36 31 27 24 22 20 18 17 15 13 180-6 30 3.6 6 Down 59 50 42 37 33 30 27 25 23 21 20 180-6R 40 4.3 6 Down 71 59 51 44 39 35 32 30 27 25 24 3/8" 50 4.8 6 Down 79 66 57 50 44 40 36 33 30 28 26 5 6 7 8 9 10 11 12 13 14 15 mph mph mph mph mph mph mph mph mph mph mph 180-10 30 3.6 10 Down 36 30 25 22 20 18 16 15 14 13 12 180-10R 40 4.3 10 Down 43 35 30 27 24 21 19 18 16 15 14 3/8" 50 4.8 10 Down 48 40 34 30 26 24 22 20 18 17 16 10 12 14 16 18 20 22 24 26 28 30 mph mph mph mph mph mph mph mph mph mph mph 260-5 30 6.8 5 Down 67 56 48 42 37 34 31 28 26 24 22 260-5R 40 8.0 5 Down 79 66 57 50 44 40 36 33 30 28 26 1/2" 50 8.8 5 Down 87 73 62 54 48 44 40 36 33 31 29 5 6 7 8 9 10 11 12 13 14 15 mph mph mph mph mph mph mph mph mph mph mph 260-11 30 6.8 11 Down 61 51 44 38 34 31 28 26 24 22 20 260-11R 40 8.0 11 Down 72 60 51 45 40 36 33 30 28 26 24 1/2" 50 8.8 11 Down 79 66 57 50 44 40 36 33 30 28 26 10 12 14 16 18 20 22 24 26 28 30 mph mph mph mph mph mph mph mph mph mph mph 370 30 14.4 10 Down 71 59 51 46 40 36 32 30 27 25 24 370R 40 16.7 10 Down 83 69 59 52 46 41 38 34 32 29 27 3/4" 50 18.8 10 Down 93 77 66 58 52 46 42 39 36 33 31

Part No. Net Ea. BM 120-3 $ 87.50 BM 120-3R 87.90 BM 120-5 87.90 BM 120-5R 87.90 BM 125 87.90 BM 125R 87.90 BM 140 93.95 BM 140R 93.95 BM 180-6 99.00 BM 180-6R 99.00 BM 180-10 99.00 BM 180-10R 99.00 BM 187 99.00 BM 187R 99.00 BM 260-5 109.10 BM 260-5R 109.10

D

Applications: • Boomless field spray applications • Roadside and right-of-way applications • End row spraying • Orchard spraying • De-Icing applications • Forestry

Part No. Description SS 1/4XP­_ _ _VP 1/4" Polymer Nozzle - Specify L or R SS 1/2XP­_ _ _VP 1/2" Polymer Nozzle - Specify L or R

(800) 228-9666

Net Ea. $ 29.10 34.65

Spray Water Gallons Per Acre Tip/Pre- Liquid Capacity Width MPH Tip No. Orifice Pressure 1 Nozzle "W" (ft) 36" Height Color (psi) (GPM) 36" Height 2 4 7 10 15 20 1/4XP10RVP 30 .87 11.0 19.6 9.8 6.5 3.9 2.6 2.0 Orange 1/4XP10LVP 40 1.00 12.5 19.8 9.9 6.6 4.0 2.6 2.0 1/4XP20RVP 30 1.75 12.0 36 18.0 10.3 7.2 4.8 3.6 Yellow 1/4XP20LVP 40 2.00 14.0 35 17.7 10.1 7.1 4.7 3.5 1/4XP25RVP 30 2.13 13.5 39 19.5 11.2 7.8 5.2 3.9 Violet 1/4XP25LVP 40 2.50 14.5 43 21 12.2 8.5 5.7 4.3 1/2XP40RVP 30 3.53 14.5 60 30 17.2 12.1 8.0 6.0 Red 1/2XP40LVP 40 4.00 15.5 64 32 18.2 12.8 8.5 6.4 1/2XP80RVP 30 6.83 16.5 102 51 29 20 13.7 10.2 White 1/2XP80LVP 40 8.00 17.5 113 57 32 23 15.1 11.3

Part No. Net Ea. BM 260-11 $ 109.10 BM 260-11R 109.10 BM 265 110.10 BM 265R 109.10 BM 370 116.20 BM 370R 116.20 BM 375 116.20 BM 375R 116.20 BM 437 121.20 BM 437R 121.20 BM 500 146.50 BM 500R 146.50 BM 504 146.50 BM 504R 146.50

DULTMEIER SALES • OMAHA, NE

• Unique orifice produces wide spray pattern & superior distribution. • Pre-Orifice design minimizes drift. • Extra wide spray pattern - up to 18.5' with a single nozzle. • Removable polymer pre-orifice • Color coding for easy capacity identification.

www.dultmeier.com

• DAVENPORT, IA

(800) 553-6975

E0370


Boomless Spray Nozzles

292

Boomless Spray Nozzles Short Pattern & Roadside Spray Nozzles — See adjacent page for more “Boominator” Nozzles — D

Stainless Steel “Boominator” Spray Nozzles are the ideal choice for spraying without booms. Patented “Anti-drift” technology. Designed to produce large droplet patterns for minimal drift. Can be used to easily spray around obstacles and over uneven terrain. Superior wear and chemical resistance. No small orifices or slots to plug up.

Spraying Applications include: Tow behind or ATV sprayers • De-icing • Dust suppression • Lawn and Turf • Grass fires • Insect control • Roadside and highway spraying and many more.

Short Pattern Nozzles Short Pattern Nozzles are designed for operating heights from 12” to 36”. Narrow to medium spray distance coverage. Right or left hand nozzles are available. No kick back pattern for overlapping.

1/4” MPT Short Pattern Nozzles: Part No. Net Ea. UD 1253R Right Hand $ 66.65 UD 1255R Right Hand 66.65 UD 1871R Right Hand 78.75 UD 1876R Right Hand 78.75 UD 2651R Right Hand 98.70

Part No. UD 1253L Left Hand UD 1255L Left Hand UD 1871L Left Hand UD 1876L Left Hand UD 2651L Left Hand

Net Ea. $ 66.65 66.65 78.75 78.75 98.70

Roadside Spray Nozzles Roadside Spray Nozzles are designed for operating heights from 18” to 48”. Wide spray distance coverage. Right hand mounting only. No kick back pattern for overlapping.

Part No. UD 1250RS UD 1400RS UD 1870RS UD 2650RS UD 3750RS UD 4370RS

Roadside Spray Nozzles: Right Hand, 1/4” MPT....... Right Hand, 1/4” MPT....... Right Hand, 1/4” MPT....... Right Hand, 1/2” MPT....... Right Hand, 1/2” MPT....... Right Hand, 1/2” MPT.......

Nozzle Mounting Center Distance: To insure proper kickback overlap between the two nozzles and spray distance outward when mounting a pair of regular pattern nozzles together these are the recommended nozzle center distances.

Net Ea. $ 66.65 72.70 78.75 98.70 104.60 110.60

DULTMEIER SALES • OMAHA, NE

(2) 1/4” Nozzles ­— (2) 1/2” Nozzles — (2) 1” Nozzles —

(800) 228-9666

www.dultmeier.com

• DAVENPORT, IA

3” - 4” Center Distance 6” - 7” Center Distance 8” - 9” Center Distance

(800) 553-6975

E0936


Boomless Spray Nozzles

293

Boomless Spray Nozzles Regular Pattern & Full Pattern Nozzles — See adjacent page for more “Boominator” Nozzles — Stainless Steel “Boominator” Spray Nozzles are the ideal choice for spraying without booms. Patented “Anti-drift” technology. Designed to produce large droplet patterns for minimal drift. Can be used to easily spray around obstacles and over uneven terrain. Superior wear and chemical resistance. No small orifices or slots to plug up.

D

Spraying Applications include: Tow behind or ATV sprayers • De-icing • Dust suppression • Lawn and Turf • Grass fires • Insect control • Roadside and highway spraying and many more.

Regular Pattern Nozzles Regular Pattern Nozzles are designed for operating heights from 18” to 48”. Wide spray distance coverage. Right or left hand nozzles are available. Features 15 degree kick back pattern for overlapping coverage.

15° Kick Back

Part No. UD 1250R UD 1400R UD 1870R UD 2650R UD 3750R UD 4370R UD 5000R UD 6250R

Regular Pattern Nozzles: Right Hand, 1/4” MPT........ Right Hand, 1/4” MPT........ Right Hand, 1/4” MPT........ Right Hand, 1/2” MPT........ Right Hand, 1/2” MPT........ Right Hand, 1/2” MPT........ Right Hand, 1” MPT........... Right Hand, 1” MPT...........

Net Ea. $ 66.65 72.70 78.75 98.70 104.60 110.60 140.40 141.40

Full Pattern Nozzles Full Pattern Nozzles are designed for operating heights from 18” to 48”. Full, wide spray 180 degree coverage from a single centrally located nozzle.

Part No. UD 1250FS UD 1400FM UD 1870FM

DULTMEIER SALES • OMAHA, NE

(800) 228-9666

www.dultmeier.com

Full Pattern Spray Nozzles: Net Ea. Full Pattern, 1/4” MPT...... $ 81.80 Full Pattern, 1/4” MPT...... 87.85 Full Pattern, 1/4” MPT...... 93.90

• DAVENPORT, IA

(800) 553-6975

E0937


Variable Rate Nozzles

294

Variable Rate Nozzles Unique design provides very wide flow rate range with reasonable pressure changes for variable rate applications. Can eliminate the need for changing nozzles, multiple nozzles on turrets and changing orifice discs.

D

QJ3-VR

SJ3-VR

QJ-VR

Variable Rate 3 Stream Nozzles

Variable Rate Nozzles Hose Barb Exit

• SJ3-VR Replaces Standard 03, 04, 05, 06 & 08 SJ3 Capacities; SJ3-VR-X2.0 Replaces Standard 06, 08, 10 & 15 SJ3 Capacities. • Pressure Range: 20 PSI to 100 PSI • Flow Range: 0.21 GPM to 0.93 GPM • X2.0 Version Flow Range: 0.42 - 1.58 • Acetal Body & Deflector Plate Construction for Good Wear Life & Chemical Resistance • Simple, Elastomer (EPDM) Variable Orifice for Reliable Operation • 3 Solid Streams

Part No. Net Ea. SS SJ3-VR VR 3 Stream Nozzle, 0.21-0.93 GPM .... $ 13.25 SS SJ3-VR-X2.0 VR 3 Stream Nozzle, 0.42-1.58 GPM..... 13.25

QJ-VR

Part No. SS QJVR-1/4SS SS QJVR-3/8NYB SS QJVR-1/4SS-X2.0 SS QJVR-3/8NYB-X2.0

Net Ea. VR Nozzle, 1/4” SS Hose Barb, 0.13-1.03 GPM .... $ 21.85 VR Nozzle, 3/8” Poly Hose Barb, 0.13-1.03 GPM... 16.20 VR Nozzle, 1/4” SS Hose Barb, 0.27-2.18 GPM..... 21.85 VR Nozzle, 3/8” Poly Hose Barb, 0.27-2.18 GPM... 16.20

PTC-VR

SJ7-VR

Variable Rate 7 Stream Nozzles

D

• Available With 1/4” & 1/2” Hose Barbs - Poly or Stainless Steel • Replaces Standard 4916-46 thru -72 Orifice Discs; X2.0 Version Replaces Standard 491667 thru -103 Discs • Pressure Range: 10 PSI to 100 PSI • Flow Range: 0.13 GPM to 1.03 GPM • X2.0 Version Flow Range: 0.27 - 2.18 GPM

Variable Rate Nozzles Push to Connect Exit

• Available In 3 Sizes with John Guest Tubing “Push-to-Fit” Connectors. 1/4”, 5/16” & 3/8” O.D. Tubing • Replaces Standard 4916-48 thru -70 Orifice Discs; 2.0 Version Replaces Standard 4916-67 thru -103 Discs • Pressure Range: 10 PSI to 100 PSI • Flow Range: 0.14 GPM to 1.00 GPM • X2.0 Version Flow Range: 0.27 - 2.18 GPM

D

• SJ7-VR Replaces Standard 03, 04, 05, & 06 SJ7 Capacities • SJ7A-VR-X2.0 Replaces Standard 08, 10 & 15 SJ7A Capacities • Pressure Range: 30 PSI to 80 PSI • Flow Range: 0.28 GPM to 0.80 GPM QJ7-VR • 2.0 Version Flow Range: 0.61 - 1.64 GPM • Acetal Body & Deflector Plate Construction for Good Wear Life & Chemical Resistance • Simple, Elastomer (EPDM) Variable Orifice for Reliable Operation • 7 Solid Streams

D

PTC-VR

Part No. Net Ea. SS PTCVR-1/4 VR Nozzle with 1/4” Tubing Connector, 0.14-1.00 GPM ............. $ 15.60 SS PTCVR-5/16 VR Nozzle with 5/16” Tubing Connector, 0.14-1.00 GPM ........... 15.60 SS PTCVR-3/8 VR Nozzle with 3/8” Tubing Connector, 0.14-1.00 GPM.............. 15.60 SS PTCVR-1/4-X2.0 VR Nozzle with 1/4” Tubing Connector, 0.27-2.18 GPM.............. 15.60 SS PTCVR-5/16-X2.0 VR Nozzle with 5/16” Tubing Connector, 0.27-2.18 GPM............ 15.60 SS PTCVR-3/8-X2.0 VR Nozzle with 3/8” Tubing Connector, 0.27-2.18 GPM.............. 15.60

Part No. Net Ea. SS SJ7-VR VR 7 Stream Nozzle, 0.28-0.80 GPM .. $ 14.65 SS SJ7A-VR-X2.0 VR 7 Stream Nozzle, 0.61-1.64 GPM... 14.65

Variable Rate Nozzle Application Information

DULTMEIER SALES • OMAHA, NE

(800) 228-9666

www.dultmeier.com

• DAVENPORT, IA

(800) 553-6975

E1114


Variable Orifice Nozzles

Variable Orifice Nozzles for Custom Applications

O-Nozzles Variable Orifice Nozzles

CP FLOATER NOZZLES

Adjusts to Large Speed Changes

D

VO265

Unlike fixed orifice nozzles that lose pattern at lower pressures and have limited flow rates at higher pressure, the O-Nozzle responds uniformly across the full range of pump pressures and flow rates. Liquid sprays out around the “o” at the cone shaped orifice and is metered out by the precision needle-shaped valve. This variable orifice feature is the key to achieving a consistent flow rate at all speeds.

CP59LS Low Volume Floater Nozzle with (3) SS Turbo Tips & (8) Flood Equivalent Orifices (2.5, 5, 7.5, 10, 15, 20, 24, & 30).

D

CP59HV High Volume Floater Nozzle with (3) SS Turbo Tips & (8) Equivalent Orifices (5, 10, 15, 20, 30, 40, 50 & 60).

FLOATER NOZZLE/CHECK VALVE COMBOS CP109LS Low Volume Combo. Similar to CP59LS but Includes Built-In Check Valve.

• Flow Rate Range of 0-13 • GPM Rating from 10 to 45 PSI

D

CP109HV High Volume Combo. Similar to CP59HV but Includes Built-In Check Valve.

• Each Nozzle has a 1/2” MPT Fitting

PRE-EMERGE SPRAYER PRODUCTS

The VO250-D Deflector O-Nozzle is a variation on the standard O-Nozzle. A deflector tip turns the spray 90° and spreads the stream over an evenly spaced 100° fan-shaped spray.

CP65TSL Low Volume Sprayer Turbo, Poly Selector, 6 Poly Tips (#1.5, 2, 3, 4, 5, 6). CP65TS Standard Sprayer Turbo, Poly Selector and 6 Poly Tips. (#3, 4, 5, 6, 8, 10).

D

CP65TSHP High Volume Sprayer Turbo with Poly Selector, 6 Poly Tips (#10, 15, 20, 25, 30, 33).

VO250-D D

CP65TSL

O-Nozzles Part No. CQ VO265-4 CQ VO265-6 CQ VO250D

295

Description Net Ea. Variable Orifice Nozzle - High............ $ 100.60 Variable Orifice Nozzle - Medium...... 100.60 Variable Orifice Nozzle with Deflector. 100.60

VariTarget™ Nozzles Variable Orifice for Variable Rate Applications Replaces (8) Conventional Nozzles!

D D

CP-S275T Triple Straight Stream Accessory. (Mounts to CP65 Series models).

• Flow Rate: 0.15-0.80 GPM @15-45 PSI; (Max: 1.5 GPM @ 100 PSI) Part No. CQ CP59LS CQ CP59HV CQ CP109LS CQ CP109HV CQ CP65TSL CQ CP65TS CQ CP65TSHP

• Spray Angle: 110 Degrees. • Droplet Size: Coarse (Blue Cap) for Systemic Application Medium (Yellow Cap) for Contact Application Very Coarse (Green Cap) for Systemic Application • Fits TeeJet™ Nozzle Bodies • Suitable for wide range of spray speeds, from 2 to 20 mph

SPRAY ACCESSORIES

• Suitable for wide range of application rates, from 5 to 40 GPA

Part No. Description Net Ea. CQ CP80C 90˚ Elbow 3/4” Coupler x 3/4” Cam Lock Adapter...... $ 16.70 CQ CP80P 90˚ Elbow 3/4" MNPT x 3/4” Cam Lock Coupler...... 15.15 CQ CP49 Filter Screen....................... 7.27 CQ CP-S275T Triple Straight Stream Access.. Tip 8.08

• Fast response to rate changes; Self Cleaning • Compatible with pressure regulators or automatic rate controllers Gallons Per Acre (GPA) - 20" Spacing Flow MPH PSI GPM 6 8 10 12 15 20 22 24 16 .15 7.4 5.6 4.5 3.7 3.0 2.2 2.0 1.8 25 .20 9.9 7.4 5.9 5.0 4.0 3.0 2.7 2.5 32 .30 14.9 11.1 8.9 7.4 5.9 4.5 4.0 3.7 35 .40 19.8 14.9 11.9 9.9 7.9 5.9 5.4 4.9 38 .50 25.0 18.6 14.9 12.4 9.9 7.4 6.7 6.2 41 .60 30.0 22.0 17.8 14.9 11.9 8.9 8.1 7.4 44 .70 34.6 26.0 20.8 17.3 13.9 10.4 9.4 8.6 47 .80 40.0 30.0 24.0 19.8 15.8 11.9 10.8 9.9 60 1.00 50.0 37.0 30.0 25.0 19.8 14.9 13.5 12.4 65 1.20 59.0 45.0 36.0 30.0 24.0 17.8 16.2 14.8 85 1.50 74.0 56.0 45.0 37.0 30.0 22.0 20.2 18.5

Part No. DL VTY DL VTB DL VTG

CP80P D

To Deliver the Best Possible Service to Our Customers,

D

Dultmeier Sales Strives to Live Up to A Set of Core Values,

VariTarget Net Ea. Nozzle Assembly, Medium Droplet, Yellow........ $ 46.95 Nozzle Assembly, Coarse Droplet, Blue............. 46.95 Nozzle Assembly, Very Coarse Droplet, Green.. 46.95

DULTMEIER SALES • OMAHA, NE

Description Net Ea. Low Volume Floater Nozzle / 8 Orifice.................... $ 99.00 High Volume Floater Nozzle / 8 Orifice................... 101.00 Low Volume Turbo Nozzle with Check Valve.......... 123.30 High Volume Turbo Nozzle with Check Valve......... 123.30 Low Volume Turbo Nozzle / 6 Orifice...................... 27.30 Standard Volume Turbo Nozzle / 6 Orifice.............. 27.30 High Volume Turbo Nozzle / 6 Orifice / Poly Tips... 27.30

(800) 228-9666

One of Which is to Be “Customer Focused” •

www.dultmeier.com

• DAVENPORT, IA

Partnering to meet and exceed customer expectations

(800) 553-6975

E0695


Sprayer Accessories

296

Electronic Sprayer Calibrators FEATURES • Simple waterproof design has no moving parts. • Shows readings in either GPM, oz/min, or liter/min. • Easy one handed operation. • Small size stores in cab, tool box or handbag. • Clear design allows for easy cleaning and trouble shooting.

Three Easy Steps:

Accurate Flow Rate Measurement in Seconds

Specifications: • Measurement Range: 0 - 1.0 GPM for the SC-1 & 1.0 - 4.0 GPM on the SC-4.

• Quickly Find Worn Spray Nozzle Tips: Industry guidelines recommend tip replacement once flow rate exceeds that of a new tip by 10%. • Accurately Measure True Tip Flow Rate: Today’s high tech sprayers can only be properly calibrated and confirmed with this knowledge. • Fast and Simple Operation: Readings in 10 seconds or less per tip.

1. Press START

button then hold meter under nozzle at slight angle.

• Accuracy: Greater of +/- 2.5% or one least significant digit. (4.0% on SC-4). • Resolution: 0.01 GPM, 1 oz/min, 0.01 L/min.

2. Allow the

meter to fill until display shows flow rate.

• Battery: Two (2) “N” size alkaline batteries. • Battery Life: 2 Years, meter has low battery indicator.

D

3. Empty the

meter by pouring the water out of the top. Display holds reading for 90 seconds.

• Size: 9.25” Tall by 2.25” in diameter. Weight is .52 lbs. • Construction: Break resistant plastic and stainless steel. Can handle 6” drop on concrete.

Irrigation Flow Meter

Part No.

GPM

Description

IN SC-1 IN SC-4

0 - 1 1 - 4

Electronic Sprayer Calibrator........ $ 162.00 Electronic Sprayer Calibrator........ 235.00

Net Ea.

Nozzle Pressure Tester

• Test for worn or plugged nozzles or regulator problems • Self-Contained & Battery Powered • Simple & Easy-to-Use; No Moving Parts • Wide Range: 0.08 to 15.0 GPM D

• Accurate to ± 0.4% • 8” in Diameter x 8” Tall • Durable; Constructed of Stainless & Hardened Plastic

• Accurately Check Nozzle Pressure Where It Counts

• Use with “Nozzle Boots” (funnels spray into meter opening)

• Digital Display: Accurate to ± 2.0% or ± 1 PSI

• Accurate to ± 0.4%

• Simple One Button Operation

• Temperature Range: 32° to 150° F. • Includes Battery With 5 Year Life

Part No.

Net Ea.

IN FM15 Irrigation Flow Meter $ 256.00 IN NB1 Nozzle Boots, Pack of 10 55.00

DULTMEIER SALES • OMAHA, NE

(800) 228-9666

Part No.

IN NPT1 Nozzle Pressure Tester, 0-100 PSI.............

www.dultmeier.com

• DAVENPORT, IA

(800) 553-6975

Net Ea.

$ 124.00

E0872


Sprayer Accessories Nozzle Cleaner

Digital Mini Thermo

Wind Meter

Clear Clogged Nozzles with a 50 PSI Blast! Works Anytime, Anywhere & Never Needs Refilling or Recharging!

Essential for pesticide applicators, this compact wind and temperature meter provides digital accuracy + or - 3% in the field. The Mini Thermo Wind Meter measures MPH, M/S, KM/H or FPM. Displays Average/ Max. speed, temperature to 122˚ F. & wind chill. Switchable with min/max. speed of 0.7 to 89 mph. Includes 400-hour battery.

D

Simple & Easy-to-Use: 1. Pull Open Plunger 3. Release Air Blast

Part No.

IN NC1

Part No. OA 3150

Compact, Only 1.5” in Diameter x 10” Long

2. Compress Plunger

Simple Easy-To-Use

Portable Wind Meter

Net Ea.

D

An economical way to check wind speed. Ideal for use in the turf and agricultural markets. Simply hold the unit in the wind and the white ball in the tube indicates wind speed. Meter has two scales: low, 2-10 mph and high, 4-66 mph. Scale is in miles per hour.

• Checks the accuracy of your sprayer nozzles • Simple, easy-to-use calibrator. • Reads GPM from .05 to .83. (Also reads in liters)

Part No.

Net Ea.

DR WW2 Wind Meter $ 42.40

Calibrator Body

Meter Calibration Container

Nozzle Adapter

• ACCURATE • CONVENIENT • ECONOMICAL • STRONG • DURABLE • LIGHTWEIGHT

116000-1 Calibration Container has a 5 gallon measurement to calibrate fluid meters. Has molded one-piece design for lightweight durability. Each container is individually calibrated at the factory for maximum accuracy.

Float

Longer Hose

Part No.

Net Ea.

GI 116000-1 Calibration Container

$ 72.75

Includes Tip Cleaning Brush

Part No.

D

Description Net Ea. Wind Meter.............. $ 72.80

Nozzle Cleaner.............. $ 48.00

Sprayer Nozzle Calibrator

297

D

Nozzle Calibration Container

Net Ea.

MZ SC1 Sprayer Calibrator $ 65.65

CP24034-PP TeeJet Calibration Container features a 68 oz. capacity and a dual scale in both U.S. and metric graduations.The container is molded in polypropylene for excellent chemical resistance and durability.

Visit Our Web-Site:

D

Part No.

www. dultmeier.com

Net Ea.

SS CP24034-PP Calibration Container $ 33.35

We Now Have Our Catalogs as Well as Parts Schematics Online!

Tip Cleaning Brush D

Part No.

Net Ea.

SS CP20016NY Tip Cleaning Brush

$ 7.35

E-Mail us: dultmeier@dultmeier.com

DULTMEIER SALES • OMAHA, NE

(800) 228-9666

www.dultmeier.com

• DAVENPORT, IA

(800) 553-6975

E0985


High Volume Washdown Fog Nozzles

298

Brass Industrial Fog Nozzles

Polycarbonate Adjustable Hose Nozzles

• Shut Off - Straight Stream - Fog

COMMERCIAL DUTY

• Delivers 30°-60°-90° Fog Pattern

D

• Supplied with Bumper • UL & FM Approved for Class A & B Fires (except 3/4” GHT & 2”).

D

Fully adjustable from solid stream to a fine mist. Polycarbonate construction with heavy rubber bumper. Rated to 100 PSI - water only.

FNB75GHT

• For Use Up to 100 PSI (water only). Part No. Size Thread

90° Spray GPM@ 100 PSI

Net Ea.

Part No.

D

EV BFN75GHT 3/4" GHT — $ 88.35 EV BFN75 3/4” * NPSH — 87.65 EV BFN100 1” * NPSH 36 104.60 EV BFN150 1-1/2” * NPSH 85 68.75 EV BFN200 2” * NPSH 108 158.10

FNB100S

• Red Polycarbonate with Bumper, Black Plastic & Steel Stem

— To 300 PSI — • Combination Straight Stream & Fog

• Adjusts from Straight Stream to Fog

• Shut Off - Straight Stream - Fog

• Provides Consistent Volume at any Spray Angle

• Operating Pressure from 25 PSI to 300 PSI (water only). • Large One-Piece Rubber Bumper with Molded Teeth

117

BRASS

Cast aluminum, anodized body, hard FBSO100S coated threads and acetal ball. 1” to 1-1/2” working pressure up to 600 PSI; 2-1/2” working pressure up to 400 PSI. D Note: PG Models include pistol grip.

POLY D

6" 8" 10" 12" 12” 10"

1/4" 5/16" 3/8" 1/2" 9/16” 1/2"

EV FBSO100S 1" * NPSH EV FBSO150S 1-1/2” * NPSH EV FBSO100S-PG 1” * NPSH EV FBSO150S-PG 1-1/2” * NPSH

$ 20.35 23.60 35.55 28.95 51.90 6.11

18 25 42 75 75 75

3/4” 1” 3/4” 1”

$ 187.20 192.20 273.30 291.30

* NPSH is compatible with Male NPT fittings.

Forestry Fog Nozzles

* Polycarbonate Plastic.

600 PSI Rating

Wash Down Nozzles

D

90016 Industrial Grade Trigger Nozzle. Insulated grip protects from hot or cold temperatures. Rated to 120° F. and 120 PSI. Inlet is 3/4” FGHT.

FFN100

90051 Fire Hose Nozzle with on/off control. Can throw water stream up to 40’. Adjustable spray pattern. Rated to 120° F. and 120 PSI. Inlet is 3/4” FGHT. D

90051

D

Fire Hose Nozzle with On/Off

90016

D

Part No.

Net Ea.

Trigger Nozzle........ $ 7.32 Fire Nozzle............. 9.95

DULTMEIER SALES • OMAHA, NE

(800) 228-9666

• Combination Fog and Straight Stream • Dual Flow Rate Nozzles (Turnset Screw for Higher Rate) • 6061-T6 Aluminum, Corrosion-Resistant Plated • Maroon Hard Coated Barrel Allows for Easy Identification • Operating Pressure to 600 PSI (water only).

FFN75GHT Part No. Size Thread

Insulated Trigger Nozzle

GQ 90016 GQ 90051

D

Part No. Size Thread Waterway Net Ea.

GPM Part No. Connection Length Outlet @100 PSI Net Ea.

3/4" GHT Brass 1" FPT Brass 1-1/4" FPT Brass 1-1/2" FPT Brass 2” FPT Brass * 1-1/2" FPT Poly

FBSO100S-PG

– Can Use with Forestry Fog Nozzles Below – D

Nonadjustable - Solid Stream

EV BN6 EV BN10 EV BN12 EV BN15 EV BN20 EV 1510

90° Spray GPM@ 100 PSI

Ball Shut-Off Nozzles Forestry Grade

Tapered Brass & Poly Hose Nozzles

For washdown and high volume cleaning - Rated to 100 PSI

Part No. Size Thread

* NPSH Female Threads are Compatible with 2” MNPT Threads. ** NST Threads-Use with Adapters listed Above.

* Female NPSH is compatible with Male NPT fittings.

— WATER ONLY —

• For Use Up to 100 PSI (Water Only)

Net Ea.

90° Spray GPM@ 100 PSI

*NPSH

D

$ 109.60

• Factory Mutual (FM) Approved.

1-1/2"

CFB200S

Net Ea. EV CFB200S 2" * NPSH 150 $ 46.55 EV HGCFB250 2-1/2” ** NST (NH) 215 118.70 EV FM2025F Brass Adapter, 2-1/2” MNST x 2” FNPT............. 42.30 EV FM2525F Brass Adapter, 2-1/2” MNST x 2-1/2”FNPT........ 27.95 EV CFG250NST Replacement Gasket, 2-1/2” NST (NH) Size is 2.250” ID, 3” OD & .187” Thickness......... 1.77

• Knurled Base

EV HPFN150

Net Ea.

$ 17.70 15.15 10.75 10.35 24.15

15 15 30 75 75

High Flow Polycarbonate Adjustable Fog Nozzles

High Pressure Brass Industrial Fog Nozzle

Part No. Size Thread

@100 PSI

EV FNB75GHT 3/4" FGHT EV CFB75GHT * 3/4” FGHT EV FNB100S 1" FPT EV FNB150S 1-1/2" FPT EV FNB200S 2" FPT * Clear Translucent Color.

* Female NPSH is compatible with Male NPT fittings.

D

GPM Size

Dual Flow Rates 1st 2nd Straight Stream Straight Stream GPM @ 100 PSI GPM @ 100 PSI

Net Ea.

EV FFN75GHT 3/4" GHT 1-2 * 3-4 * $ 102.00 EV FFN100 1” ** NPSH 12 25 105.60 EV FFN150 1-1/2” ** NPSH 25 70 143.50 * GPM Rating @ 40 PSI. ** Female NPSH is compatible with Male NPT fittings.

www.dultmeier.com

• DAVENPORT, IA

(800) 553-6975

E0771


Sprayer Relief Valves Nylon, Brass & Ni-Resist

299

Pressure Relief/Regulating Valves

Diaphragm Pressure Relief Valves

• • • • •

These Diaphragm Style Pressure Relief Valves are available with Nylon, Brass or Ni-Resist lower body. Connections are 3/4" NPT with a 1/4" FPT gauge port. Features: Fairprene Diaphragm • 300 PSI Pressure Range • Aluminum Bonnet • Stainless Steel Springs • Positive Adjustment Lock • Extra Large Valve Passages

23120 Bypasses excess liquid. Adjustable to maintain control of line pressure up to 150 PSI. Selected setting firmly held in place by locknut. Extra large valve passages to handle large flows. Available in either 3/4" or 1/2" sizes. Ports are MPT inlet by FPT outlet. (Gauge port is tapped but not drilled).

Pressure (PSI) 10 20 30 40 60 80 100 Flow Rate (GPM) 22 31 38 44 54 62 70 D

Max. Flow rates through valves at various pressures with valves fully open.

- Piston Type -

1/4" Gauge Port Pressure to 150 PSI Polypropylene with stainless steel spring Excellent Chemical Resistance EPDM O-Rings

Part No. Part No.

Diaphragm By-Pass Valves Net Ea.

SS 8460-3/4 SS 9840-3/4DI SS 9840-3/4 SS RK8460 SS 8361-3/4NY

Nylon Valve ..................... $ 35.45 Ductile Iron Valve ............ 104.90 Brass Valve...................... 103.60 Fairprene Repair Kit ........ 13.40 Nylon Repair Body .......... 12.10

SS 23120PP-1/2 SS 23120PP-3/4

Nylon Pressure Relief Valves Adjustable from 10 to 250 PSI-depending on flow rates. Nylon construction for maximum resistance. Stainless steel springs. Brass stem and lock nuts. Positive seals to prevent any leakage down shaft. Knurled locknuts. 3/4" MPT x FPT.

- Piston Style -

Extra sensitive Pressure Control - Standard design for pressures up to 700 PSI is built with two extra long, different tension Stainless springs. The lighter spring controls lower pressure settings and the stronger spring becomes operative at higher pressure settings. Extra LargeValve Passage handles full flow of 3/4" supply line. Special inner rib construction provides flushing action around shut-off piston and springs. Prevents “salting out” of chemicals. Fast, responsive adjustment to changes in line pressure results. Pressure Setting Locks in Position and will not change due to vibration or jarring. Rated to 150° F. Buna Gaskets.

MAXIMUM FLOW RATES THROUGH No. 110 PRESSURE RELIEF VALVES AT VARIOUS LIQUID PRESSURES (with valve "Full-Open")

Model 6815 Piston Type

Model No.

10 15 20 25 30 psi psi psi psi psi

35 40 50 60 70 80 100 psi psi psi psi psi psi psi

Part No. Max. PSI Net Ea. HY 3300-0015 150 $ 22.60 HY 3300-0016 250 22.60

D

Polypropylene Preset Pressure Relief Valves Used on sprayers and other applications to relieve pressure at a preset level (nonadjustable). Reinforced polypropylene body. Preset pressure spring (see below). FKM (Viton® type) seals. 1" Flanged ports for quick & easy installation. Pressure Part No. Pressure Relief Valve Setting TK MPRV100-100 1" x 1" Relief Valve 100 PSI TK MPRV100-125 1" x 1" Relief Valve 125 PSI TK MPRV100-150 1" x 1" Relief Valve 150 PSI

Ports

Pressure Range

SS 6815-3/4-300 SS 6815G-3/4-700 SS AB6815-300

3/4" Up to 300 PSI $ 42.85 * 3/4" 300 to 700 PSI 78.75 Repair Kit..................... 9.78

Capacities to 18 gpm

No. 23520 Nylon Throttling Valves can be used in conjunction with the 144 series solenoid valves and regulating flow in systems equipped with centrifugal pumps where sensitive regulation is required; or to control flow in jet agitator return lines. Locknut holds setting. Polypropylene construction for chemical resistance. 1/2" or 3/4" connections. Pressures to 125 PSI. 10 psi drop at 10 GPM flow rate for 1/2", 18 GPM for 3/4" size.

D

Ductile Iron & Aluminum

Pressure Relief Valves

Part No. Net Ea.

Stainless Steel Spring in all models provides sensitive response to pressure fluctuations at all pressure settings.

SS 23520PP-1/2 Throttling Valve - 1/2”............ $ 17.50 SS 23520PP-3/4 Throttling Valve - 3/4”............ 17.50

3/4" Nylon Throttling Valve

MAXIMUM FLOW RATES THROUGH No. 110 PRESSURE RELIEF VALVES AT VARIOUS LIQUID PRESSURES (with valve "Full-Open")

10 15 20 25 30 psi psi psi psi psi

Capacities to 82 gpm

35 40 psi psi

Maximum Flow Rate 1" - 1-1/4" 40 49 57 63 69 75 80 in gallons per minute 1-1/2" size 83 101 117 131 144 155 166

No. 12690-3/4" is generally used for metering flow on systems equipped with centrifugal pumps, or other applications where metering of flow is required. Can be used in controlling flow in jet-agitator return lines. Made of NYLON (body), ALUMINUM and STAINLESS STEEL Stem locknut Long Tapered Seat ... Nylon seating surfaces for positive shut-off. Maximum PSI is 125. 3/4" MPT Inlet, 3/4" FPT Outlet.

D

For accurate and dependable control of spraying pressures up to 150 PSI.

Also Available in Brass from 1/4” to 1-1/2” Body Part No. Ports Material Net Ea.

SS 110I-1 1" Ductile Iron $ 110.40 SS 110AL-1 1" Aluminum 91.60 SS 110I-1-1/4 1-1/4" Ductile Iron 114.80 SS 110AL-1-1/4 1-1/4" Aluminum 99.35 SS 110I-1-1/2 1-1/2" Ductile Iron 114.70 SS 110AL-1-1/2 1-1/2" Aluminum 99.30

FLOW RATES IN G.P.M. In Fully Open Setting

Floating seat with internal guide vane minimizes chatter. Removable bonnet for servicing unit without removing valve from line.

10 20 30 40 60 80 100 PSI PSI PSI PSI PSI PSI PSI 26 37 45 52 64 74 82

Part No.

(800) 228-9666

www.dultmeier.com

D

OUTLET 3/4" FPT

INLET

3/4" MPT Throttling Valve Net Ea.

SS 12690-3/4 Nylon - 3/4" FPT x 3/4" MPT

Viton® is a registered trademark of DuPont Performance Elastomers

DULTMEIER SALES • OMAHA, NE

Net Ea. $ 40.65 40.65 40.65

Nylon Throttling Valves

Net Ea.

* Has a guide seat with stabilizer vane designed to eliminate tendency to chatter due to pressure changes. ** Aluminum.

Liquid Pressure in pounds per square inch

D

1/2" & 3/4"

6815-3/4-300 18 23 26 29 32 34 36 40 44 47 50 56 6815-3/4-700

Part No.

Net Ea.

1/2" Pressure Regulator $ 20.15 3/4" Pressure Regulator 20.10

8460-3/4

Brass & Aluminum Pressure Relief Valves

D

D

• DAVENPORT, IA

(800) 553-6975

$ 54.20

E0375


12-Volt Sprayer Valves

300

Metered By-Pass Control Valves Automatically Maintains System Pressure When Valve is “On” or “Off”

Outlet 1 (To Spray Line)

Inlet

D Continuous Bypass Outlet 2 (Regulated Return Flow to Tank

144-1-3

D

144-3-3

Shown with optional 23520 throttling valve. Part No. SS 144-1-3 SS 144-3-3 SS 23520PP-1/2 SS RK14413

12-Volt DirectoValve ®

These three-way solenoid operated Directo Valves can be used in conjunction with the 23520 Throttling Valve to maintain constant spraying pressure even when one or more boom sections are shut off. To maintain constant pressure using the 23520 Throttling Valve, Outlet 2 must be throttled to match the total capacity of the nozzles on that boom section. With 3/4" flow through connections and 1/2" outlets, the 144-1-3 provides large flow capacities with minimal pressure drop (5 PSI at 8 GPM). The 12-Volt DC coil can be changed easily without removing the valve from line. Good corrosion resistance and only 2.5 amp power requirement. Can be used with 744 Sprayer Control. Maximum operating pressure is 65 psi. 23520 Throttling Valve has polypropylene construction for excellent chemical resis­tance. 1/2" NPT connections. Pressures to 125 psi. 10 psi pressure drop at 10 GPM flow rate.

D

Solenoid DirectoValves provide remote on-off control for all spray equipment where 12-volt DC power is available. Polypropylene valve body. Available in 3/4" or 1" sizes. Internal parts of EPDM 144A-3 (Three Unit) or Viton® provide trouble-free operation. Large internal flow chambers make these valves suitable for wettable powders. Units can be used separately or in gang applications. “P” Series Directo Valves include stainless armatures, heavier coils and viton diaphragms. Best choice in hot weather. D

144P-1 “P” Series (Single Unit)

No. of Diaphragm Flow Capacity Part No. Valves Size & Seal PSI At 5 PSI Drop Net Ea. SS 144A-1 1 3/4"x1/2" EPDM 100 10 GPM $ 81.40 SS 144A-3 3 3/4"x1/2" EPDM 100 10 GPM 253.40 SS 144A-1-VI 1 3/4"x1/2" Viton® 100 10 GPM 95.75 SS 144P-1 1 3/4”x1/2” Viton® 100 10 GPM 114.60 SS 144P-3 3 3/4”x1/2” Viton® 100 10 GPM 343.10 SS 145H-1 1 1" EPDM 100 15 GPM 190.10

D

Part No. VALVE REPAIRS & ACCESSORIES Net Ea. SS RK144AEP * EPDM Repair Kit for 144A-1.................................. $ 16.30 SS RK144AVI * Viton® Repair Kit for 144A-1................................. 24.25 SS RK144 * EPDM Repair Kit for 144-1 3/4" Valve.................. 16.30 SS AB144VI * Viton® Repair Kit for 144-1 3/4" Valve.................. 29.15 SS AB145 Repair Kit for 145-1 1" Valve................................. 35.10 SS PKAB144P1KIT Repair Kit for 144P................................................ 29.15 SS 14801PP Nylon Body for 144-1 3/4" Valve........................... 12.10 SS CP15163NYB Solenoid Coil Only for 144A-1............................... 41.90

Description Net Ea. Single Unit Solenoid, Less Throttling Valve................ $ 110.60 Three Unit Solenoid, Less Throttling Valve................. 334.60 Optional Throttling Valve only (Priced Each).............. 17.50 EPDM Repair Kit for solenoid..................................... 18.65

* NOTE: The 144-1 Valves were replaced during 1992 by the 144A-1 series. Parts are not interchangeable.

- 430 Series -

12-Volt Manifold “Flowback” Valves

344BE - 12-Volt DC Operated

2-Way & 3-Way Electric Ball Valves • 1" FPT Ports, 3/4" Flow. • Pressures to 300 psi.

D

435EC (Five Valve Unit)

• Wetted Parts: Nylon, Teflon, Polypropylene, and Viton®.

The 430 Series Flow Back Manifold utilizes a unique ball design that relieves trapped pressure in the boom. This provides instant shutoff at nozzles and eliminates application problems.

• • • • • • • • • • • •

0.6 Second Shutoff Time. Liquid from Flow Back Line Must Be Returned, Unrestricted, To The Top Of Tank Less Than 0.5 Amp Steady State Current Draw at 12 VDC Motor Available in EC (Single pole, single throw) Stainless Steel Ball & Stem Large Quick Connect Inlet Can Be Configured in a Variety of Ways Quick Connect Fittings Used On Outlet and Flow Back Port Maximum Pressure Rating of 215 PSI Flow Rate is 9.2 GPM (35 I/min) at a 5 PSI (0.34 bar) Wetted Parts are Polypropylene, Stainless Steel and Viton® Available in 2-Way and 3-Way Versions Standard Spec is EC-2D - No Cables Or Connections Included. Select Cables From 58480 Series. Part No. SS 431EC SS 432EC SS 433EC SS 435EC SS 433EC-3FB SS 45529-3/4 SS 45529-1 SS 45529-90-3/4 SS 45529-90-1 SS 58445

Description Net Ea. 3/4”, 12 Volt, Single Valve with Manifold.................... $ 122.90 3/4”, 12 Volt, Two Valve with Manifold........................ 260.80 3/4”, 12 Volt, Three Valve with Manifold..................... 323.50 3/4”, 12 Volt, Five Valve with Manifold....................... 543.00 “Flowback” Manifold Valve, 3/4”, 12V, Three Valve..... 352.90 3/4” Straight Hose Barb Connection Kit...................... 5.20 1” Straight Hose Barb Connection Kit......................... 6.00 3/4” 90 Degree Hose Barb Connection Kit................. 6.00 3/4”, 90 Degree Hose Barb Connection Kit................ 6.00 Replacement Motor ................................................... 94.95

DULTMEIER SALES • OMAHA, NE

(800) 228-9666

• 12-Volt DC operation.

D

• 5 PSI pressure loss for 32 GPM flow. • 3/4 Second.

344BEC-24C 2-Way Valve

344BEC-34C

12-Volt DC REMOTE CONTROL Valves

D

3-Way Valve

Part No. SS 344BE-24C SS 344BEC-24C SS 344BEC-34C SS 50515-25CP05

Description 2-Way Valve with Double Pole SW.............. 2-Way Valve with Single Pole SW................ 3-Way Valve with Single Pole SW................ Motor Sub Assembly...................................

Net Ea. $ 157.40 158.00 228.10 139.80

Viton® is a registered trademark of DuPont Performance Elastomers

www.dultmeier.com

• DAVENPORT, IA

(800) 553-6975

E0380


12-Volt Sprayer Valves 346 Series

450

Remote Control Electric Ball Valves

Manifold Systems

3-Way • 12 Volt DC Operated

301

12 Volt Flanged Inlet 1" FPT Outlets

• Maximum pressure 150 PSI • 5 PSI pressure drop for 85 GPM flow on 2-way, 64 GPM flow on 3-way.

D

• 0.6 second response time from fully closed. • Internal resettable fuse.

D

• Wetted parts made of corrosion-resistant material: glass-reinforced polypropylene, Teflon®, stainless steel, and Viton®

The 450 Manifold System provides a convenient compact alternate to the standard solenoid valves which are common on all sprayers. The manifold style eliminates the need for custom fabrication and will reduce assembly time. Priced with 1" valves with 1" FPT outlets & 2" standard flange inlet.

• Sealed motor assembly. • Flanged connections available. Part No.

Size

Features:

Description

Wt.

SS 346BEC-35-C 1-1/4" 12 V, 3-Way Ball Valve SS 346BEC36C 1-1/2" 12 V, 3-Way Ball Valve SS 50515-25CP05 Motor Sub Assembly..............

• 25 RPM, 0.6 seconds shutoff fully open to close; 200 PSI Maximum.

Net Ea.

• Available in 2-way versions only. Pressure regulating valves can be incorporated.

4 lbs. $ 306.60 4 lbs. 306.60 2 lbs. 139.80

• Flexible inlet / outlet connections allow for quick simple plumbing for as many valves needed for your sprayer. • Stainless steel stem with optional polypropylene or stainless steel ball.

356 Series

Remote Control Two-Way 12 Volt Electric Ball Valves “Trunion” Ball Design is supported by bearings at top & bottom; this maintains precise alignment which assists in wear life. Valve stem & ball are 316 stainless for superior wear & corrosion-resistance; All plastic parts are D polypropylene and external metal trim is 303 stainless; All metal gears for added strength. Stainless mounting foot. Viton® o-rings & carbon-filled Teflon seal. High Flow Rates: 100 GPM at 5 PSI drop. 1-1/4” Valve with 1" Banjo Style Flanges. 0.6 second response time from full open to full close (other speeds available). 150 PSI maximum pressure. Draws 2 amps at 13.8 volts DC. Available with DIN connector with double seal or jacketed cable with weatherproof grip cord (3 wire; 20” long; other cable lengths available). Positively switched. Part No. Size SS 356BEC-C 1” Flange SS 356BEC-D 1" Flange SS AB356-KIT SS 50515-25CP05

• Wetted parts are nylon, Teflon®, polypropylene and Viton®. • 32 GPM @ 5 PSI drop. Part No. SS 453BEC24C SS 455BEC24C SS 451BEC-24C SS 50515-22CP05

490 Series

Manifold Valves 12 Volt Flanged Connections

D

Valve Description Wt. Net Ea. 12 Volt with 20" Cable............ 4 lbs. $ 221.00 12 Volt with DIN Connector.... 4 lbs. 221.00 Repair Kit .............................. - 46.95 Motor Sub Assembly.............. 4 lbs. 139.80

440 Manifold Systems

The 490B Directo-Valve® is a high volume commercial duty control valve. Incorporates the 356 Series "Trunion" Ball Design. Valves will respond quickly and last longer than others.

Features: Banjo 2" standard port flange inlet x 1" flange outlets • 25 RPM,

12 Volt • 1" FPT Connection

0.6 seconds shutoff fully open to close • 316 stainless steel ball • 100 GPM @ 5 PSI pressure drop • Maximum pressure 150 PSI • Wetted materials are polypropylene, stainless steel, carbon filled Teflon, Viton® and Ryton • 20" cable connection standard (DIN connection available) • Fasteners and mounting foot made of stainless steel • Available in 2-way versions only. Pressure regulating valves can be incorporated

The TeeJet® 12VDC 440B Series Directo Valve Manifold provides a convenient, compact solution for the installation of multiple 344B electric ball valves. Standard with 0.5 meter cables (other lengths & DIN connectors available).

Description Wt. Net Ea. Three Valve Manifold.............. 12 lbs. $ 529.00 Five Valve Manifold................ 19 lbs. 870.00 Replacement Valve & Motor... 4 lbs. 168.60 Motor Sub Assembly.............. 4 lbs. 139.30

Part No. Description Wt. Net Ea. SS 492BEC-C Two Valve Manifold............ 8 lbs. $ 495.50 SS 493BEC-C Three Valve Manifold......... 12 lbs. 748.00 SS 494BEC-C Four Valve Manifold........... 16 lbs. 998.00 SS 495BEC-C Five Valve Manifold............ 19 lbs. 1250.00 SS AB356-KIT Repair Kit .......................... - 46.95 SS 50515-25CP05 Motor Sub Assembly.......... 4 lbs. 139.80

D

FEATURES: • • • • •

0.6 Seconds shutoff fully open to close. Up to five electric ball valves. Built-in brackets. 300 PSI Flow rate 26 GPM with 5 PSI pressure drop.

• Internal resettable fuse. • Stainless steel stem with optional polypropylene or stainless steel ball. • 1" FPT Connections.

Part No.

Solenoid Manifolds Wt. Net Ea.

SS 443BEC SS 445BEC SS 440BEC4C SS 50515-22CP05

Three Valve Manifold............... 14 lbs. $ 591.00 Five Valve Manifold ................. 18 lbs. 976.00 Replacement Valve & Motor..... 4 lbs. 194.30 Motor Sub Assembly................ 4 lbs. 139.30 DULTMEIER SALES • OMAHA, NE

(800) 228-9666

Order From Our Entire Inventory On-Line!

Dultmeier.com

Current Pricing • Web Specials • Closeout Items •

• Current Flyers • Order Status • Parts Schematics

Viton® is a registered trademark of DuPont Performance Elastomers

www.dultmeier.com

• DAVENPORT, IA

(800) 553-6975

E0382


Manifold, Regulating & Boom Valves

302

12 Volt Flowback Manifold Valves Use these 12 Volt flowback manifold valves with your automatic boom shut-off systems to minimize respray into a previously sprayed areas. These unique flowback valves include a special port to direct some flow back to the spray tank when they are shut off. This “flowback” port allows the sprayer’s boom to quickly dissipate residual spray pressure so the diaphragm check valves on each nozzle can close. These flowback valves will reduce pressure in the boom much more quickly than conventional shut-off valves (approximately one second versus 8-10 seconds), avoiding respray & saving valuable product. High flow rates: 32 GPM at 5 PSI pressure drop. 443EC-FB: 11.7 GPM at 5 PSI. 200 PSI pressure rating. Nylon valve bodies & polypropylene manifold & balls. Manifold includes 2” Std. Port “Banjo” flanges; valve outlets are 1” FPT. Flowback valves require special hose barb fitting & cap kits. (Sold separately; see right).

D

D

“Flowback” Port

Front View

* Need (1) of 45529-1 Or 45529-90-1 and (1) Plug Kit for “Flowback” Ports.

NYLON DirectoValves On-off control of spray lines with a continuous bypass feature. Available in single or triple units. Pressures to 150 PSI. Side connections are 3/4" FPT. Line connection is 1/2' FPT. Suitable for most agricultural chemicals and liquid fertilizers. Body is Polypropylene. All components are made of corrosion resistant materials. By-Pass Design Offers the advantage of continuous flow. In “shut-off” position, all liquid by-passes through the valve. In “open” position liquid is directed to spray line and excess by-passes through valve.

• Polypropylene 6B1

• 3/4” Size: Stainless Butterfly Valve, 20 GPM & 100 PSI

D

• 1” Size: Either FPT or Flanged. 38 GPM & 300 PSI

D

Model 244

Model 344

Part No. SS 244-3/4 SS 344BRL-24 SS 344BRL SS PKAB244KIT

Description 3/4", 12-Volt Regulating Valve 1” FPT Regulating Valve......... 1” Flanged Regulating Valve... Repair Kit...............................

Net Ea. $ 88.25 176.90 176.90 9.60

Boom Control Valves

Description Net Ea.

SS 17Y SS RK17L

Tee Valve....................... $ 75.35 Repair Kit for 17Y Valve. 21.05

DULTMEIER SALES • OMAHA, NE

(800) 228-9666

Part No.

Directo Valves Net Ea.

SS 6B1 Single Section Valve................ SS AB6B-KIT Repair kit for (1 ) 6B valve.......

$ 29.65 15.00

To Deliver the Best

For selective control of three-section boom sprayers at pressures up to 300 PSI. • Use to open any of three boom section lines in any desired combination. • Raise lever to open, lower lever to close the D valve without changing the indexed position. • Aluminum construction with stainless steel and plastic internal parts for maximum corrosion resistance. • 1" Inlet, 3-3/4" Outlets • 3/4" Accessory Outlet Part No.

Back View

Part No. Outlets Description Net Ea. SS 433EC-3FB Three 12 Volt Flowback Manifold Valve.... $ 352.90 SS 451BEC3FB One 12 Volt Flowback Manifold Valve.... 185.50 SS 452BEC3FB Two 12 Volt Flowback Manifold Valve.... 382.30 SS 453BEC3FB Three 12 Volt Flowback Manifold Valve.... 581.00 SS 454BEC3FB Four 12 Volt Flowback Manifold Valve.... 770.00 SS 455BEC3FB Five 12 Volt Flowback Manifold Valve.... 957.00 SS 45529-1 * 1” Straight Hose Barb “Flowback” Kit (Required) 6.00 SS 45529-90-1 * 1” 90° Hose Barb “Flowback” Kit (Required). 6.00 SS 45529-C Cap Kit ....................................................... 6.00 SS 45529-P Plug Kit (Required) ..................................... 6.00 SS 50515-25CP05 Motor Assembly.......................................... 139.80

12 Volt Regulating Valves D

“Flowback” Port

Possible Service to Our Customers, Dultmeier Sales Strives to Live Up to A Set of Core Values, One of Which is to Display “Character”

www.dultmeier.com

• DAVENPORT, IA

Do the right thing even when no one is looking

(800) 553-6975

E1104


12-Volt Sprayer Valves

303

Flanged Electric Ball Valves

12V Off/On & Regulating Ball Valves

Off/On & Regulating - 12V

• 316 Stainless Steel Ball & Stem • Fiberglass Reinforced Polypropylene • Teflon Seats • Viton® O-Rings • 12-Volt DC (24 Volt Available) • 150 PSI Maximum Pressure • Internally Fused/Automatic Reset

• Threaded Connections • 316 Stainless Steel Ball & Stem D • Full flow - All Sizes • Fiberglass Reinforced Polypropylene • Teflon Seats • Viton® O-Rings • 12-Volt DC (24 Volt Available) • 150 PSI (100 PSI on 3”) • Internally Fused/Automatic Reset Response Part No. Description Time Wt. Net Ea. TK VE075 3/4" Off/On Valve 3/4 Sec. 5 lbs. $ 236.80 TK VE100FP 1" Off/On Valve 3/4 Sec. 5 lbs. 236.80 TK VE125 1-1/4" Off/On Valve * 3/4 Sec. 5 lbs. 236.80 TK VE150 1-1/2" Off/On Valve 1.3 Sec. 7 lbs. 347.00 TK VE204FP 2" Off/On Valve 1.3 Sec. 7 lbs. 366.30 TK EV300FP 3” FP Off/On Valve 1.3 Sec. 7 lbs. 997.00 TK VER075 3/4" Regulating Valve 4 Sec. 5 lbs. 327.70 TK VER100FP 1" Regulating Valve 4 Sec. 5 lbs. 327.70 TK VER125 1-1/4" Regulating Valve * 4 Sec. 5 lbs. 393.20 TK VER150 1-1/2" Regulating Valve 4 Sec. 7 lbs. 412.50 TK VER204FP 2" Regulating Valve 4 Sec. 7 lbs. 435.60 TK EV3100 12 Volt Motor for 3/4” to 1-1/4” On/Off Valves 152.10 TK EV4300 12 Volt Motor for 2” FP On/Off Valves........... 209.00 * Not Full Flow

D

Response Flange Ball Part No. Description Time Size Flow Wt. Net Ea. TK MVE100CF 1" Off/On Valve 3/4 Sec. 1" 1" 5 lbs. $ 236.60 TK MVE200CF 2" Off/On Valve 1-1/4 Sec. 2" Std 1-1/2" 6 lbs. 346.40 TK MVE220CF 2" FP Off/On Valve 1-1/4 Sec. 2" Full 2" 8 lbs. 364.40 TK MVER100CF 1" Regulating Valve 4 Sec. 1" 1" 5 lbs. 327.70 TK MVER200CF 2" Regulating Valve 4 Sec. 2' Std 1-1/2" 6 lbs. 411.70 TK MVER220CF 2" FP Regulating Valve 4 Sec. 2" Full 2" 8 lbs. 434.70 TK EV3100 12 Volt Motor for 3/4” to 1-1/4” On/Off Valves.............. 152.10 TK EV4300 12 Volt Motor for 2” FP On/Off Valves.......................... 209.00

Flanged Connection Manifold Valve Assemblies

D

12 Volt Manifold Boom Valves FEATURES:

• Inlet 2" Standard Port Banjo Flange • Outlet 3/4" FPT or Banjo 1" Flange Connection D

• Rated at 40 GPM @ 5 PSI Pressure Drop

Part No. TK MVE103CF TK MVE105CF

• 0.7 Second Close Time • 175 PSI Maximum Working Pressure • Wetted Parts are Polypropylene, Stainless Steel & Viton®

Description Single Section Manifold Boom Valve Three Section Manifold Boom Valve Five Section Manifold Boom Valve

Wt. 4 lbs. 9 lbs. 13 lbs.

Wt. 17 lbs. 28 lbs.

Net Ea. $ 730.00 1243.00

Flanged 3-Way Electric Ball Valves 12 Volt - Directional • 316 Stainless Steel Ball & Stem

Net Ea. $ 190.70 555.00 919.00

• Fiberglass Reinforced Polypropylene

D

D

• Teflon Seats • Viton® O-Rings

Boom On/Off Valves

• 12-Volt DC (24 Volt Available)

12 Volt • High Volume • Flanged These poppet style valves feature advantages over ball style valves such as high flow rates, fast open/close, resistance to wettable powders and increased reliability. Features: Pin retained motor head allows for fast repairs • Flanged ports. • 2 & 3 Port valves for in line boom and manifold configurations • Glass-filled polypropylene bodies • Viton® seals • Stainless wetted parts • 150 PSI rating • 5 amps draw (12V) at 150 PSI • 0.8 Seconds open/close time. Flow rates: 3 Port Valve is 89 GPM at 5 PSI drop and 2 Port Valve is 78 GPM at 5 PSI drop.

Description 3 Valve Manifold Assembly 5 Valve Manifold Assembly

Note: 2" Inlet & 1" Outlet Fittings, Gaskets & Clamps Not Included

Note: Requires Clamp, Gasket and Inlet Connection. Specify Size.

Part No. RV 926 RV 928 RV 39

Features: Glass filled polypropylene • Super Teflon seats • High torque motor • Dual sealed motor housing • 12-volt DC operated (24 Volt available) • Internally fused/auto reset • Flanged connections - No Threads! • Stainless steel ball & stem.

• 150 PSI Maximum Pressure • Internally Fused/ Automatic Reset

D

No. 657

No. 658

Side Load

SIDE LOAD: Directional Flow Left Part No. Description TK MVE100SLCF 1" Full Port Electric TK MVE200SLCF 2" Std Port Electric TK MVE220SLCF 2" Full Port Electric

Bottom Load

or Right, Valve CANNOT BE TURNED OFF Response Flange Ball Time Size Flow Wt. Net Ea. 3/4 Sec. 1" 1" 7 lbs. $ 266.00 1-1/4 Sec. 1-1/2" 1-1/2" 8 lbs. 412.50 1-1/4 Sec. 2" 2" 99 lbs. 412.50

BOTTOM LOAD: Directional Flow Left or Right, Valve CANNOT BE TURNED OFF Response Flange Ball Part No. Description Time Size Flow Wt. Net Ea. TK MVE100BLCF 1" Full Port Electric 1-1/2 Sec. 1" 1" 7 lbs. $ 266.00 TK MVE200BLCF 2" Std Port Electric 2-1/2 Sec. 1-1/2" 1-1/2" 8 lbs. 412.50 TK MVE220BLCF 2" Full Port Electric Ball 2-1/2 Sec. 2" 2" 99 lbs. 412.50 TK EV3100 12 Volt Motor for 3/4” to 1-1/4” On/Off Valves....................... 152.10 TK EV4300 12 Volt Motor for 2” FP On/Off Valves ............................. 209.00

D

Part No. Description Inlet Port Outlet Port Wt. Net Ea. RV 657 3 Port Valve M220 Flange/2” FPT M200 Flange/1.5” FPT 12 lbs. $ 224.20 RV 658 2 Port In-Line M200 Flange/2” FPT M200 Flange/1.5” FPT 9 lbs. 224.20

Viton® is a registered trademark of DuPont Performance Elastomers

DULTMEIER SALES • OMAHA, NE

(800) 228-9666

www.dultmeier.com

• DAVENPORT, IA

(800) 553-6975

E0383


Valves

304

Mini Boom Control Valves

Nozzle Body ChemSaver® Check Valves ®

ChemSaver Electric Solenoid Shutoff Valve

• 12 Volt DC • Response Time is 1/3 sec. Open to Close • TFM Seats

55295 ChemSaver® is a solenoid actuated shutoff compatible with a wide range of TeeJet nozzle bodies equipped with a diaphragm check valve. It can be used for end of boom nozzles as well as individual tip shutoff and PWM controls.

D D

55295

• Standard 3-Wire Configuration • Maximum Pressure = 200 PSI @ 70° F.

D

• Valve is normally closed & opens when solenoid is energized. • Wetted materials include stainless steel and Viton®. • Use with most diaphragm check valve equipped TeeJet nozzle bodies. • 100 PSI maximum spraying pressure at minimum voltage. • 0.6 GPM at 5 PSI pressure drop and 0.8 GPM at 10 PSI pressure drop. • 1/4 Second response time. • Offered in 12 or 24 volt DC version. • 2-Pin MetriPack connector molded into body for a clean, weather-tight electrical connection. • Requires 98552 cable with 2 pin FM connector. Part No. SS 55295-1-12 12-Volt ChemSaver® Electric Solenoid Shutoff Valve for QJ7560A, QJ360E, QJ200, QJ300, 24216A, 24230A, QJ39685 & QJ(T)8360 Nozzle Bodies ... SS 55295-2-12 12-Volt ChemSaver® Electric Solenoid Shutoff Valve for QJ360C, QJ22187 & QJ8355 Nozzle Bodies... SS 55295-4-12 12-Volt ChemSaver® Electric Solenoid Shutoff Valve for QJS..................................................................... SS 98552-05 2-Wire Adapter Cable, 20”...................................... SS 98552-15 2-Wire Adapter Cable, 60”......................................

• EPDM Seals

MLEV100 D

LEV050 Pipe Opening Part No. Description Size Thru Ball Net Ea. TK MLEV100 1” Electric Valve, Flanged 1" 1/2" $ 95.95 TK LEV038 3/8” Full Port Electric Valve 3/8” 3/8” 89.85 TK LEV050 1/2” Full Port Electric Valve 1/2” 15/32” 89.85

Net Ea. $ 107.80 107.70 107.70 12.30 15.80

LEV Series Electric Push Lock Valves

ChemSaver® Manual Shutoff • Use with any application where individual shutoff is important such as golf course and estate sprayers • 150 PSI maximum pressure rating • Nylon construction

Features: 12 Volt DC • Stationary current draw is less than 0.04 amps • Rotating current draw is less than 0.40 amps • Stall current is 0.75 amps • Response time is 1/3 second open to close • TFM seats • EPDM seals • Fiberglass reinforced polypropylene • Integrated mounting slot • Standard 3 wire configuration • Maximum pressure is 150 SI @ 70 F.

58140 D

D

Part No. TK LEV025PL TK LEV038PL TK LEV050PL

Part No. Net Ea. SS 58140 ChemSaver® Manual Shutoff $ 3.50

Chemsaver Air & Shut-Off Valve

Visit Our Web-Site:

56720 ChemSaver Air Shutoff Valve is designed as a pneumatic valve for use on Quick TeeJet nozzle assemblies using a one-piece diaphragm check valve with a flat diaphragm. Fail Safe: Air pressure open (115 psi maximum), spring close. 12 Volt versions also available. Part No. SS 56720-1/8-F

Description Chemsaver Shut-Off

Description Net Ea. 1/4” Micro Push Lock Mini Ball Valve.... $ 100.70 3/8” Micro Push Lock Mini Ball Valve.... 100.70 1/2” Micro Push Lock Mini BallValve..... 100.70

www. dultmeier.com We Now Have Our Catalogs as Well as Parts Schematics Online!

Net Ea. $ 21.45

Find Us on Facebook and Twitter E-Mail us: dultmeier@dultmeier.com Viton® is a registered trademark of DuPont Performance Elastomers

DULTMEIER SALES • OMAHA, NE

(800) 228-9666

www.dultmeier.com

• DAVENPORT, IA

(800) 553-6975

E1069


12-Volt Sprayer Valves

305

FEATURES: Waterproof polypropylene motor case, NEMA 6P & 7D rated • High Torque motors with Perm a Lube gears • Torques up to 500 lb-in., valves 3/4" to 4" • Stainless Steel Hardware • Internal Automatic reset circuit breaker • 90˚ bidirectional rotation • 12 or 24 volt AC-DC actuators • Geared for the OEM • Valves include 316SS Balls and Stems • Nylon or Polypropylene Bodies • Dual Viton® O-Rings.

K.Z. Valve™ Replacement Actuators for Major Self-Propelled & Pull Sprayers

K.Z. Valve™ 12-Volt Manifold Systems

KZ Valve™ Replacement Actuators and Valves fit many major selfpropelled and pull-type sprayers in the field (see footnotes below for common sprayers they fit). Each Actuator or Valve/Actuator ships with complete wiring diagrams along with 3 and 4 pin Packard Weatherpack Connectors (unattached) with wiring pins and dust plugs. Both on/off and regulating actuators are available. Actuator housings are NEMA 7D & 6P, rated for outdoor use and washdown.

D D

60AM

60AW

Replacement Actuators Only:

Part No. KZ 60AM KZ 60AQ KZ 60AP KZ 60AZ KZ 60AY KZ 60AW KZ 60AU

On-Off or Regulating On-Off On-Off On-Off On-Off On-Off On-Off On-Off

Seconds to Close 0.8 Sec. 7 Sec. 2.5 Sec. 0.5 Sec. 1.5 Sec. 3 Sec. 8 Sec.

Volts 12 12 12 12 12 12 12

Shape* Net Ea. 4” Square (EH3) $ 183.90 4” Square (EH3) 211.40 4” Square (EH3) 211.40 L Shape (EH2) 258.50 L Shape (EH2) 258.50 L Shape (EH2) 254.70 L Shape (EH2) 274.70

* EH3 Actuators are Square Shaped, approx. 4” x 4” x 3.5” tall; they are typically used on John Deere 4720 & new series sprayers, John Deere 4900 & 6700 series sprayers; Case NH & Agco (Rogator, Wilmar, Eagle, Spray Coupe) sprayers; Hagie, Apache, Walker & Miller St. Nazianz sprayers - 3 Wire ONLY. * EH2 Actuators are “L” Shaped, approx. 6.5” x 4.5” x 6.5” tall

D

QC3 stackable ball valves feature full port nylon valve with 3/4" SS ball. 1-1/2" FPT / 2” SP Flange inlet stackable manifold x “hairpin” fitting outlets included. Rated at 300 PSI. Quick release hairpin outlets required from 1/2" to 1" in straight hose barb or 90˚ hose barb. Valves stackable from single units on up. 0.8 seconds close time standard (Other speeds available). QX4 stackable poly ball valves feature a 1" SS ball and stem standard, with a 1-1/2" FPT / 2” SP Flange inlet stackable manifold included. Rated at 150 PSI. Stainless steel hardware. Standard with 1” FPT outlets. Quick release hairpin outlets available from 1/2" to 1" in straight hose barb or 90˚ hose barb, 3/4" FPT or 1" MPT also available on outlets, order separately. Valves stackable from single units on up. SS mounting brackets on stacks of 2 or more units. Available in 2, 3, 4, or 5-way units. All units have O-rings at all sealing points. 0.8 second close time standard. Note: Hairpin outlet fittings must be ordered separately. Each Fitting includes (2) O-Rings. Order 1 fitting for each outlet in valve stack. Hairpin outlet fitting package not included in valve prices. QX102 Hair Pin

Valve/Actuator Combinations

(No Manifolds Included) Includes 316SS Balls/Stems, Poly Valve Bodies, PTFE Seats, Stem Seal with Dual Viton® O-Rings. Rated to 300 PSI

Part No. Stack Manifolds Net Ea. KZ T-12IM QC3 Single Valve Assembly......................... $ 274.80 KZ T-22IM QC3 Two Valve Assembly............................. 493.40 KZ T-32IM QC3 Three Valve Assembly.......................... 808.00 KZ T-42IM QC3 Four Valve Assembly............................ 1033.00 KZ T-52IM QC3 Five Valve Assembly............................ 1232.00 KZ 400-22IM QX4 Two Valve Assembly............................. 513.00 KZ 400-32IM QX4 Three Valve Assembly.......................... 822.00 KZ 400-52IM QX4 Five Valve Assembly............................ 1286.00 KZ QHN075 3/4" Straight Nylon Hose Barb Outlet Fitting. 5.69 KZ QHN075L 3/4" 90˚ Nylon Hose Barb Outlet Fitting........ 5.69 KZ QHN075F 3/4" Female NPT Nylon Outlet Fitting........... 5.69 KZ QHN100 1" Straight Nylon Hose Barb Outlet Fitting.... 5.69 KZ QHN100L 1” 90° Nylon Hose Barb Outlet Fitting........... 5.69 KZ QX102 Hair Pin Only................................................. 1.24

D

F2F60AM Part No. KZ A2F60AM KZ F2E60AM KZ F2F60AM KZ 99K60AW

On-Off or Seconds Regulating to Close Volt On-Off 0.8 Sec 12 On-Off 0.8 Sec 12 On-Off 0.8 Sec 12 On-Off 3 Sec 12

Actuator Shape* 4” Sq. (EH3) 4” Sq. (EH3) 4” Sq. (EH3) L Shape (EH2)

Outlet Port Net Ea. 1” Hairpin $ 278.30 3/4” FPT 278.10 1” FPT 272.70 3” FPT 643.00

“Stackable” Manifold/Valve/ Actuator Combinations D

12 Volt Flanged/NPT Stack Valves QX6

1-1/2” Full Port Inlet x 3/4” Hairpin or 1” FPT Outlets (Order Hairpin Outlets & End Caps Separately See Section At Right of This Page for Hairpins) T12AM

On-Off or Seconds Actuator Outlet Part No. Regulating to Close Volt Shape* Port Net Ea. KZ T12AM On-Off 0.8 Sec 12 4” Sq. (EH3) 1-1/2” x 3/4” HP $ 267.70 KZ T32AM On-Off 0 .8 Sec 12 4” Sq. (EH3) 1-1/2” x 3/4” (3) HP 764.00 KZ 400-12AM On-Off 0.8 Sec 12 4” Sq. (EH3) 1-1/2” x 1” FPT 304.10 KZ QX-180 Manifold End Cap.......................................................................... 10.55 KZ QX-201 O-ring for Manifold End Cap.......................................................... 3.72 KZ QX-220 Bolt for Manifold End Cap (4-required)......................................... 2.49 * T32AM includes (3) valves on one common 1-1/2” manifold with end caps & brackets. DULTMEIER SALES • OMAHA, NE

(800) 228-9666

High flow 1-1/2" full port valves with combination outlets: 2" flange plus internal NPT. Polypropylene valve with stainless steel ball & stem. Many different wiring options and 5 motor speeds: 0.5 seconds to 8 seconds 12-volt available. Part No.

Stack Manifolds

KZ 600-32BY 3 Valve Assembly

D

NPT Flange Cycle Size Size Time

1-1/2"

Net Ea.

2" Std. 1.5 Sec. $ 1141.00

Viton® is a registered trademark of DuPont Performance Elastomers

www.dultmeier.com

• DAVENPORT, IA

(800) 553-6975

E0381


12 Volt Sprayer Valves & Controllers

306

CONTROL SYSTEMS

1/4" Solenoid Valves

for Foam/Dye Markers • Chemical Injection • Nozzle Control

without Solenoid Shutoff Valves

RC1B Series Remote Control System

The 2201 12-Volt DC Solenoid Valve has 1/4" NPT female inlet and outlet. The valve housing is made of glass-filled nylon and the wetted metal parts of 304 and 430 stainless steel.Viton® seals and “O” rings are standard. Coils are totally epoxy encapsulated with 1/4 male spade or Weather Pack sealed electrical connections. These direct operating valves can be used for foam and dye markers, small sprayers, boom and nozzles, chemical injection systems, individual nozzle shutoffs, etc. Good choice when large flow and high pressure are required. D

Specifications: 148 Diameter Orifice • .45 CV Rating • 1 GPM • 125 PSI • 12-Volt DC • 1 Amp. • 32˚-150˚F. 2201

D

The 2204 3-Way 12-Volt DC Solenoid Valve has a 1/4" NPT female inlet and two 1/4" NPT female outlets. The valve housing is made of glass-filled nylon and the wetted metal parts of 304 and 430 stainless steel. Viton® seals and “O” rings are standard. The coil is totally epoxy encapsulated. Ideal for foam markers to control both air and liquids. Specifications: 105 Diameter Orifice • .22 CV Rating • 1/2 GPM • 40 PSI • 12-Volt DC • .85 Amp • 32˚-150˚F.

2204

3-Way

The Standard Control System is equipped with 6-ft. cab harness, 8-ft. sprayer harness and nylon pressure regulator without solenoid shutoff valves. Also available with 4 & 5 valve control.

RC10N Series Remote Control System

Part No. Description Net Ea. TX 2201 1/4” 12 Volt Solenoid with Spade Conn..... $ 50.25 TX 2201WP 1/4" Solenoid Solenoid, Weather Pak........ 52.65 TX 2204 1/4” 12 Volt Solenoid Valve / Spade Conn. 53.30 TX 2204AWP 1/4" 3-Way Solenoid, Weather Pak........... 54.75 TX 2252 Aflas Repair Kit for 2199A Series.............. 21.00 TX 2255 Viton® Repair Kit for 2100A Series........... 18.70

1” Solenoid Valves

D

Series 1999 12-Volt DC Electric Boom Shutoff Valves have a 1" NPT female, 1" male bypass outlet, and 3/4" NPT female boom line outlet for high volume applications at minimum pressure loss (pressure drop is only 5 psi at 18 GPM). Current draw of only 1 amp per valve. Chemical resistant glass-filled nylon body with Viton® or Aflas diaphragm and seals. Response time, .2 seconds turn-on; .5 turn-off. Maximum operating pressure is 175 PSI. For multiple valve units, simply screw one valve to another. 32˚-150˚F.

D

Series RC1B Remote Control System with toggle-type boom RC1B and pressure regulator switches is designed to give the operator complete and safe control of both spraying pressure and boom shutdown from the tractor seat. The cab harness of the control console attaches to the 1560 sprayer harness with molded quick disconnects for quick and easy coupling of the sprayer to the tractor. This exclusive feature also affords the option of cab and sprayer harness lengths most D suitable for your tractor and sprayer combination. Includes 0-100 psi pressure gauge, adjustable mounting bracket, toggle-type regulator, master switch and on/off switches for solenoid shutoff valves, 8-ft. power cord with fuse holder and fuse, and high pressure gauge line encased in a tight fitting jacket of the wiring harnesses.

D

The RC10N Series Remote Control System is the ideal control package for sprayers which require control over only one boom shutoff valve. Includes 0-100 pressure gauge, mounting bracket, regulator switch, on/off boom switch, 8-ft. power cord with fuse holder, 15ft. sprayer harness with encased high pressure gauge tubing which acts as both a pressure transmitter and a pulsation dampener. The Standard Control System is equipped with a 1560 3/4" pressure regulator.

RC10N

D

Part No. TX RC1B

1999-1

Net Ea.

Remote Control System with 1560 Pressure. $ 235.50 regulator & switches for 3 solenoid valves.......

TX RC1BL Remote Control System with 1560 Pressure regulator, liquid-filled pressure gauge & switches for 3 solenoid valves ....................................... 263.70

Part No. Net Ea. TX 1999-1 12 Volt Solenoid Viton® with Spade Conn......... $ 87.60 TX 1999A-WP Solenoid Shutoff Valve, Weather Pak................. 92.55 TX 2045 Viton® Repair Kit for 1999 Series...................... 41.30 TX 2113 Aflas Repair Kit for 1999 Series......................... 48.80 TX 2517 Viton® Repair Kit for 1999A Series.................... 32.60 TX 2613 Coil Assembly for 1999 Valve............................. 48.50 TX 2515 Coil Assembly for 1999A Valve.......................... 44.30

TX RC10N Remote Control System with 1560 Pressure regulator, without solenoid shutoff valve.......... 185.30 TX 1560

Pressure Regulator.......................................... 78.35 Viton® is a registered trademark of DuPont Performance Elastomers

3/4” Solenoid Valves 2500B 12-Volt DC Electric Boom Shutoff Valve has a 3/4” NPT female inlet, 3/4” NPT male bypass outlet and a 1/2” NPT female boom outlet. Totally enclosed epoxy encapsulated coil draws only 2 amps per valve at 12 volts. Equipped with Viton® seat and seal. Wetted parts consist of 430 stainless steel and chemical resistant glass filled nylon body. For multiple units, simply screw one valve to another. Has a weather pak connection. D

Part No.

Net Ea.

TX 2500B-1 TX 2500B-1WP TX 2352

3/4” 12 Volt Solenoid Valve with Spade Conn...... $ 71.15 3/4” 12-Volt Solenoid Valve, Weather Pak............ 68.90 Repair Kit............................................................. 14.95 Viton® is a registered trademark of DuPont Performance Elastomers

DULTMEIER SALES • OMAHA, NE

(800) 228-9666

www.dultmeier.com

• DAVENPORT, IA

(800) 553-6975

E0388


Electric Actuated & Manifold Valves

307

Electric Actuated Valves Electric Controlled Ball and Butterfly Valves from KZ Co. Valves are standard with high torque, 12 or 24 volt electric motors that feature machined steel gears for quick and powerful opening and closing control. Motor closing times are shown below. Other closing times are generally available. EH II Valves are available in three styles: Polypropylene Ball Valves, Stainless Steel Ball Valves or Cast Iron Butterfly Valves with stainless disc and EPDM seat. Specifications: Solid state, waterproof nylon motor case, NEMA 6P & 7D rated • High Torque motors with Perm a Lube gears • Torques up to 275 lb-in., valves 3/4" to 3" • Stainless Steel Hardware • Auto reset circuit breaker • Built in relay standard • 90˚ bidirectional rotation • 12 or 24 volt AC-DC actuators.

FPT Volts Actuation Time Part No. Ports AC or DC Valve Type At 12 Volts Net Ea. KZ 59I55Y 2" 12 Cast Iron Butterfly* 1-1/2 Sec. $ 516.00 KZ 59K55Y 3” 12 Cast Iron Butterfly* 1-1/2 Sec. 592.00 KZ 59I66U 2" 24 Cast Iron Butterfly* 4 Sec. 631.00 KZ 59I66W 2" 12/24 Cast Iron Butterfly* 3 Sec. 625.00 KZ 59K66U 3" 12/24 Cast Iron Butterfly* 7 Sec. 682.00 KZ 88E55Z 3/4” 12 Stainless Ball Valve 1/2 Sec. 399.90 KZ 88F55Z 1" 12 Stainless Ball Valve 1-1/2 Sec. 416.30 KZ 88H55Y 1-1/2” 12 Stainless Ball Valve 1-1/2 Sec. 478.50 KZ 88I22-10DW0 2” 12 Stainless Ball Valve 3 Sec. 599.00 KZ 88F66W 1" 12/24 Stainless Ball Valve 3 Sec. 479.80 KZ 88H66W 1-1/2" 12/24 Stainless Ball Valve 3 Sec. 563.00 KZ F2E55M 3/4" 12 Poly with S.S. Ball 0.8 Sec. 256.10 KZ F2F60AM 1" 12 Poly with S.S. Ball 0.8 Sec. 272.70 KZ F2H55Y 1-1/2" 12 Poly with S.S. Ball 1-1/2 Sec. 381.80 KZ F2I55W 2" 12 Poly with S.S. Ball 3 Sec. 459.60 KZ 99K60AW 3" 12 Poly with S.S. Ball 3 Sec. 643.00 KZ F2F66M 1" 24 Poly with S.S. Ball 0.8 Sec. 305.80 KZ F2H66W 1-1/2" 24 Poly with S.S. Ball 1.5 Sec. 477.80 KZ F2H66Y 1-1/2" 24 Poly with S.S. Ball 1.5 Sec. 455.10 KZ F2I66W1 2" 24 Poly with S.S. Ball 1.5 Sec. 565.00 KZ 67B33 1/4” 12 NH3, Stainless Vented Ball 0.8 Sec. 322.20 KZ 67D33 1/2” 12 NH3, Stainless Vented Ball 0.8 Sec. 322.20 KZ 67E33 3/4” 12 NH3, Stainless Vented Ball 0.8 Sec. 355.60 KZ 67F22 1” 12 NH3, Stainless Vented Ball 1.5 Sec. 412.10 KZ 67H22-10 1-1/2” 12 NH3, Stainless Vented Ball 1.5 Sec. 487.40 Note: Other wiring options or motor control speeds are available on request. * Butterfly valves fit between 150 lb. ANSI Flanges.

59 Series Cast Iron & Aluminum Butterfly Valves with EPDM seats are available in either 2", 3", 4” or 5" sizes. 2” to 3” Valves (Cast Iron) are rated to 150 PSI and 4” to 5” Valves (Aluminum) are rated to 50 PSI. Features 12 or 24-volt, AC or DC motors rated at 1-1/2 to 7 second closing time.

D

88 Series Standard Port Stainless Steel ball valves are available in full port, 1/4" to 1/2" sizes and standard port 3/4” to 2”. Rated to 2000 PSI (1/4’ to 1”) and 1500 PSI (1-1/2” & 2”).Available with 12V or 24VAC/DC actuator with 1/2 to 8 second motor speed.

D

D

QX 'SA' Series Full port 2-way polypropylene ball valves are available in 3/4" through 3" sizes. Polypropylene valves rated to 150 PSI, nylon valves available & rated to 300 PSI, featuring a 12 or 24-volt, AC or DC motor rated at 1/2 to 8 second closing time. 3/4" through 3" sizes are standard with FNPT ports. (Available with Banjo Style flanges).

EHSX & EHPT Series On/Off Switch Boxes come with 12' power lead, 30' of hook-up cable with plugs at 5' and 30' from box. Available in single, double and triple models. Part No. KZ EHSX-155 KZ EHPT-26A KZ EHSX-355

D

On/Off Switch Boxes Net Ea. Single On/Off Switchbox......... $ 142.70 Double On/Off Switchbox........ 154.00 Triple On/Off Switchbox........... 257.60

Zip Valve - 12 Volt -

D

ZIP-3/8 Zip Valve is a two-way ball valve with 1/4” nylon, stainless steel ball and stem, 3/8” dual o-ring push to connect connections (John Guest™). More durable than solenoid valves. Rated 150 PSI at W.P. EH8 Series, 12 volt DC motor, on/off, 0.18 second cycle time. IP67 rated (water-proof) 0.15 amp draw. Viton® elastomers and PTFE seats. Can run separately or “daisy chain” in series for section shut-off. 3.5 GPM @ 5 PSI Drop; 0° to 120° F.

Part No. Net Ea. KZ ZIP-3/8 Zip Valve, 3/8”, 2-Way.............................................. $ 79.30 KZ 398-0376 2M Power Supply Cable with Push On Connector... 30.30 KZ 398-0411 1M Cable “Daisy Chain” with Push On Connector... 42.45 KZ 308-0092 Dust Cap Connector (One Minimum Required)....... 3.41

DULTMEIER SALES • OMAHA, NE

(800) 228-9666

TX2 Valves - 12 Volt -

D

TX2 Valves are two-way, 1/2” polypropylene, full port, stainless steel ball and valve stem, PTFE seat and Viton® stem seal. These valves have Banjo 1” flange connections (Other connections available). Rated 150 PSI at 70° F. 12 volt DC motor, on/off or regulating valve, 0.5 second cycle time. Waterproof nylon actuator case in NEMA 6P and 7D rated. Also available in 2 or 3 valve combinations banked onto manifolds. Part No. Net Ea. KZ TX2 1/2” On/Off Valve....................... $ 150.00 KZ TX2-REG 1/2” Regulating Valve................. 158.60

www.dultmeier.com

• DAVENPORT, IA

(800) 553-6975

E0779


HYPRO ProStop-E™

308

CALL US FOR DETAILS !

Service and Production Department

Dultmeier Sales engineers and builds a large variety of pumping systems, including “Custom Packages” to meet your unique needs. We build centrifugal, gear, diaphragm, fuel and DEF pumping systems. We also build Liquid De-Ice & turf / tree sprayers, chemical inductors, manifolds, load arm systems & more.

To Deliver the Best Possible Service to Our Customers, Dultmeier Sales Strives to Live Up to A Set of Core Values, One of Which is to Be “Customer Focused”

Partnering to meet and exceed customer expectations

DULTMEIER SALES • OMAHA, NE

(800) 228-9666

www.dultmeier.com

• DAVENPORT, IA

(800) 553-6975

E1128


Field Computers • Injection Systems Viper Pro Precision Application & Mapping System

309

Direct Injection System Sidekick Pro

Turn Your Existing Raven Controllers Into Variable-Rate Controllers The Viper Precision Application System lets you variably apply up to 5 products according to shapefile maps from FarmWorks, SST, SGIS and other popular mapping software. Automatically turns your spray booms on and off. You can make a spot-spray map, import it into the VIPER, and the unit will automatically turn the spray booms on and off. D

D

The VIPER has real data logging you can count on. It not only shows where you've been in the field, but shows what you've actually done. Data logging includes rate, location, and all other controller information.

The Sidekick Pro™ Direct Injection System sets a new standard for chemical applications of every type, with unprecedented precision, savings and safety. No tank mixing required and with the industry’s first automatic calibration feature, you’re ready to go in minutes. Utilize Rinse Assist to automatically flush the pump quickly and thoroughly. The whole system is amazingly simple and pays off with greater precision, higher yields and unrivaled efficiency. With the Sidekick Pro™ direct injection system, you can save more in time and inputs — and get more for it when applying costly herbicides, insecticides, liquid fertilizer and nitrogen stabilizer. Because there is no premixing in the tank, there is no waste from unused product — and no cleanout/disposal issues when your done.

Use your existing coverage maps.You can import coverage maps of a particular field into the VIPER. Say you have to stop halfway through a field, just import the application map from that field on another day and pick up right where you left off. The Viper Pro can control SmarTrax / QuickTrax steering systems.

Features: • High Resolution Encoder that provides smoother pump control & exceptional lock on target rate technology. • Remote Closed-System Calibration eliminates the need for calibration catch tests & exposure to chemicals. • Low Volume Capacity of 1-40 ounces per minute. • High Volume Capacity of 5-200 ounces per minute. • Automatic Priming Feature. • ISO Compatible pump.

Viper 4 Also Available Call for Information Part No.

RV 117-0171-112 Viper Pro Kit includes Viper, Single Product Interface Cable and Power Cable....................

PRO II Field Computer

Net Ea.

$ 4600.00

D

D

Sidekick System

Large 6.5” Color “Non-Glare” Touch-Screen Display with day/night mode. Integrated DGPS Sub-Meter Receiver for WAAS and 9” pass to pass accuracy. Also includes MBA6 helix antenna. Multiple Screen Views let you switch on the fly between downfield and birds-eye views to fit your operating needs. Field Review Screen allows you to check field coverage on the spot and correct skips or missed areas before leaving the field. Dual-Product Control gives you an extra dimension for efficient liquid, granular, or NH3 applications, including direct injection. Now with Variable Rate Application that is available as an option. Use with Raven’s new SwitchPro to make your product control easy to use and get the benefit of AccuBoom automatic boom section control. Easily upgradable from existing SCS440, 450, 4400 controls with existing wiring! Up to ten boom D sections and master controls right at your fingertips. Easily mounts to EnvizioPro II for a seamless Switch Pro integration with minimal cab clutter.

Call Us to Determine Your Exact System Requirements! Part No. Description Net Ea. RV 117-5010-009W Envizio Pro II with GPS..................... $ 3571.00 RV 117-0171-167 Switch Pro Kit for SCS440/450......... 2290.00 DULTMEIER SALES • OMAHA, NE

(800) 228-9666

Key Benefits: • Up to 4 units on one machine, allowing easy switching between fields and applications. • No pre-mixing, tank mixing, cross contamination or clean out. • Powerful positive displacement pump which injects on the pressure side, closer to the boom, for faster response time. • Reduced chemical exposure means additional safety for the operator. • Adjust chemical concentration on the fly rather than spraying more or less of the entire mix. • Gain flexibility in the work day — with direct injection, you don’t need to worry about weather. • Flexibility with multiple chemical applications. • Automatically flush Sidekick Pro™ with Optional Rinse Assist for increased reliability and fewer service issues. (Freshwater tank sold separately). • Inline mixer and check valves sold separately.

Field Computer & Spray Console Compatibility for Sidekick Pro™: Envizio Pro™ • Envizio Pro II™ • Envizio Pro XL™ • Viper® 4 • Viper Pro™ • SCS 5000™ • SCS 4400™ • SCS 4600™ • ISOBUS. Part No.

Description

RV 063-0173-213 RV 063-0173-212 RV 117-0171-554

Sidekick Pro High Volume with 24 Gallon Tank, 5-200 oz/min. ............... $ 3453.00 Sidekick Pro High Volume with 24 Gallon Tank. 1-40 oz/min................... 3453.00 Rinse Assist Kit...................................... 651.00

www.dultmeier.com

• DAVENPORT, IA

Net Ea.

(800) 553-6975

E0631


Sprayer Controllers

310

844E Sprayer Control

854 Sprayer Control

TeeJet’s 844E Sprayer Control offers spraying advantages not found in other controllers. Designed with simplicity in mind, computer-controlled spraying has never been so easy. Simply set your target application rate and the unique VisiFlo display on the 844 helps select the right TeeJet tip for the application. Once spraying begins, the large display shows application rate, volume sprayed, system pressure, sprayer speed and area covered. The built-in planning tool on the 844E automatically displays the speed needed to achieve the target rate with the specified tip. It will also calculate the pressure necessary for achieving the target application rate when the speed is entered. The 844E is available in a complete package with the valves, cables and sensors needed to put together a total sprayer control system, or as an individual controller.

D

Model 844E

Model 854

Aluminum Console Housing

Easily Accessible Programming Mode

D

Same Great Features as 844E Plus:

Large, Backlit Display Boost Mode

Auto/Manual Control

Communication Port for PC & GPS Interfacing

Master Shut-Off

(5) Individual Boom Switches Color-Coded Tip Selection Bar

802 Flow Meter

A complete 844E Control will include the console and core kit. Core kit includes 26’ cable harness and power cable and mounting brackets. Additionally select a speed sensor, pressure regulating valve, flow meter and boom on/off valves (pressure sensor is optional).

• Pre-Program Up to 4 Target Application Rates. • Auto-Master can be set to automatically switch entire boom off & on at minimum speed, such as at end of rows. • Auto tank fill feature allows the console to control tank-filling operations. • Dual boom capability means wider ranges of speed & application rate.

• Smart Sensing automatically selects between pressure or flow sensors, choosing the best sensor for that application. • Communications por t for printer, PC & GPS connections.

Part No. Description Net Ea. SS 854 Console Only...................................................... $ 1039.00 SS 90-02108 854 Core Kit, Console, Mounting Bracket & 26’ Harness....................................................... 1283.00 Part No. Description Net Ea. SS 844E Core Kit with Control, Bracket & 26’ Harness.... $ 1144.00 SS 801 1” SP Flange Flowmeter (2.6-53 GPM).......... 348.50 SS 90-50230 1" Hose Barb Flow Meter............................... 366.80 SS 90-50232 1-1/4” Hose Barb Flow Meter......................... 356.80 SS 802 2” SP Flange Flowmeter (3-130 GPM)........... 371.50 TeeJet’s 834-P Sprayer Control is specifically designed for use on smaller SS 344BRL-24 1” Regulating Ball Valve, FPT Ports............... 176.90 sprayers and many planters applying starter fertilizer with 12-volt pumps. SS 344BRL 1” Regulating Ball Valve, Flanged Ports......... 176.90 Rather than controlling a regulating valve, as most spray controllers do, the SS 90-02476 Pressure Sensor for 844E & 854................... 230.30 834-P simply controls the 12-volt pumps RPM to automatically change the SS 90-02386 GPS Speed Sensor........................................ 370.50 application rate with speed changes. Pressure sensor continually measures SS 45-20239 Extension Cable, 10’...................................... 261.20 D

834-P Sprayer Control

744A Sprayer Controls 744A Series Sprayer Controls have been designed to control sprayer booms from the tractor cab. The Pressure Adjust Switch, when connected to a 244 Regulating Valve, allows the operator to increase or decrease system pressure. Master Switch provides on/off control of all nozzles. Boom Control Switch allows on/off control of individual sections of the boom for edge spraying or spot spraying.

D

No. 744 Console

FEATURES

Model 744A Controls: are available in 3 section models. High quality sealed switches. With 3/4" remote regulating valve and 100 PSI liquid pressure gauge lighted for night use. 12' power and 16’ cable harness included. LED lights to indicate boom section status.

Part No. Switches Valves Reg. Valve Net Ea. SS 90-50149 3 0 0 $219.80 SS 90-50161 3 0 1 256.40 SS 90-50163 3 3 1 417.90 SS 90-02439 3 0* 0 330.30 SS 90-02580 3 0** 1 448.70 * Includes cable harness for (3) ball valves & (1) Regulating valve (no valves included). ** Includes cable harness for (3) ball valves & (1) Regulating valve (1 valve included).

Part No. SS 45-20091 SS 45-20079 SS 45-20100

pressure near nozzles (or orifice discs) for specific nozzle rate data you program into console. Can program in GPA for Ag/Turf spraying or in GPT (gallons per ton) for deice “pre-wetting” of salt. The 834-P will give you accurate ground speed oriented rate control with minimal up front set up time. Simple plumbing and setup make this an ideal control system for ATV sprayers, compact mobile sprayers, planters and more.

Output Extension Cables for 744 Controls Description 8' Extension for 744A-3 15' Extension for 744A-3 Power Cable for 744A

DULTMEIER SALES • OMAHA, NE

Net Ea. $ 38.30 65.75 26.85

(800) 228-9666

D

• Simple Programming & Setup • Pressure Sensor Based Control Means Easy Installation • Clear Display Shows Application Rate, System Pressure & Speed • 25 Amp Capacity for Use with Most 12 Volt Pumps

Model 834-P Part No. Description Net Ea. SS 834-P Console Only...................................................... $ 440.60 SS 90-50225 Core Kit, Console, Mounting Brackets, Cables, Booster Module, 150 PSI Pressure Sensor & Proximity Speed Sensor.................................... 1306.00 CABLE HARNESSES SS 45-05210 26’ Main Cable for 854 with Power & Speed (with Fill Function)............................................. 380.20 SS 45-20065 26’ Main Cable for 834,844, & 854 with Power & Speed (with No Fill Function) ........................ 332.20 SS 45-20239 10’ Cable Extension for 834,844, & 854 with Power & Speed.................................................. 261.20

www.dultmeier.com

• DAVENPORT, IA

(800) 553-6975

E0384


Sprayer Controls SCS-11

Flow Max 810 Automatic Batch Control Console

D

The SCS-11 will operate one sprayer boom and is ideal for use with single-boom sprayers, roadside sprayers, or planter kits.

For Chemical Fill Plants • Nurse Trucks & Tanks - Precise Measurement of Liquids -

COMPONENTS: • High impact control box with mounting bracket. • Toggle switches. • 8 ft. of battery cable. • 0-100 PSI mechanical gauge. • 16 ft. of flexible signal cable from control panel to valve. • 3/4" Polypropylene regulator valve (optional 1" or 1-1/2" valve). Solenoid valve not included. • Mechanical Gauge

Part No. Control System RV SCS11 For Single Solenoid Valve

SCS-103

D

COMPONENTS: • High impact control box with mounting bracket. • Master fuse. • 8 ft. of battery cable. Part No. RV SCS103

FEATURES:

• Start, stop and clear batch controls. • Programmable batch size. • Pre-cutoff setting to ensure accurate batch volume. • Quick & easy installation and programming • Non-volatile memory.

D

An in-line flow meter measures the volume of liquid being pumped through it. The flow meter sends a signal to the 810 control console, when desired preset volume is reached. The console sends a signal to the shut-off valve to close. A wide range of flow rates and plumbing sizes can be accommodated. Flow meter & valve options shown below. 12 Volt only.

Regulator Valve Size Net Ea. 3/4" $ 259.00

Monitor Display Features: Volume remaining in tank, Rate of flow, Total and sub volumes measured.

The SCS-103 independently operates one, two, or three sprayer booms providing on/off control but not pressure control. The sprayer control operates the solenoid valves for remote on/off control of liquid flow at the sprayer boom. The control can also be connected to control the tank agitator. The SCS-103 is easily adaptable to all existing sprayers.

Part No.

Description Net Ea.

RV 810 RV 115-0159-763 RV 115-0159-762 RV 115-0159-764

Automatic Batcher.................. $ 772.00 3' Console Control Cable....... 90.40 21' Flow Control Cable........... 147.50 10' Flow Extension Cable....... 69.35

Note: Flow Max 810 can be configured with any RAVEN flow meter.

Flow Max 110 Flow Monitor Console

• Toggle spray switches, extra long master switch. • 16 ft. of flexible signal cable from control panel to valves. • Solenoid valve not included.

Control System For Three Solenoid Valves

Net Ea. $ 237.60

Measures liquid being pumped. An in-line flow meter provides a signal to the Flow Max 110 monitor displaying a readout in gallons or liters. Operates on either 12V DC or with any standard 110V AC converter. Works with a variety of RAVEN flow meters to accurately meter a wide range of flow rates and accommodate a variety of plumbing sizes. Flow Max 110 can be configured with any RAVEN flow meter.

D

MONITOR DISPLAY FEATURES: Batch Volume (0-9999) • Rate of Flow • Total Volume Measured (0-9999) • Sub Volume Measured

SCS-203 The SCS-203 sprayer control system provides on/off control of sprayer booms, plus control of sprayer pressure. Individual booms are on/off controlled with a separate switch while fluid pressure can be increased or decreased to compensate for speed changes in field conditions. The SCS-203 independently operates one, two or three sprayer booms providing on/off and pressure control. A master switch activates all booms at once.

311

D

Part No.

Description

RV 110

Flow Monitor

Net Ea.

$ 572.00

To Deliver the Best Possible Service COMPONENTS: • High impact control box with swivel mounting bracket. • Toggle spray switch for each boom. • Extra long switches for master on/off and pressure adjust. • 8 ft. of battery cable. • 6 ft. of flexible signal cable from control panel to valves. • 0-100 psi mechanical gauge. • 3/4" polypropylene regulator valve (optional 1" or 1-1/2" valve). • Solenoid valve not included.

to Our Customers, Dultmeier Sales Strives to Live Up to A Set of Core Values, One of Which is “Teamwork”

Combining skills, talents and efforts to achieve company success

Regulator Part No. Control System Valve Size Net Ea. RV SCS203 For Three Solenoid Valves 3/4" $ 372.00 RV 107-0159-025 12' Extension Cable.......................... 76.75

DULTMEIER SALES • OMAHA, NE

(800) 228-9666

www.dultmeier.com

• DAVENPORT, IA

(800) 553-6975

E0386


Sprayer Controls

312 SCS 330 Sprayer Flow Control System

SCS 660SI Sprayer & Granular Flow Control System The SCS 660SI allows for simple and accurate control of either liquid or granular application.

D

Raven’s SCS330 automatically maintains a single programmed application rate regardless of speed changes and/or changes in the number of boom sections being used. (Ground speed compensated automatic rate control). Features: 3 boom section control • Quick and easy programming • Manual increase/decrease switch • Flow rate - GPA • Distance traveled • Speed • Total volume applied - gallons • Total area worked. Part No. Net Ea. RV SCS330 Console Only $ 849.00

D

GPS Compatible.

Features: Easy to read LCD display • Ground speed compensated automatic rate control • Cumulative TOTAL VOLUME applied and TOTAL AREA worked • Automatic rate +/- • PWM valve control option • Low limit setting • 7 Boom control (with separate boom switch box). Part No. RV SCS660SI

Description SCS660 Console

Net Ea. $ 1469.00

SCS 440SI Sprayer Flow Control System for GPS Set your application rate and the SCS440SI automatically maintains that rate throughout your entire spraying job regardless of changes in vehicle speed or terrain, or the number of boom sections being used. The rate window in the SCS440SI console continually displays the actual rate of spray application (GPA). A variety of other spraying information is also available in the data window on command:

D

Features: Serial Port for use with GPS • Total volume applied (cumulative) • Total area worked (cumulative) • Field volume applied (sub-plot) • Field area (sub-plot) • Vehicle speed (mph or kph) • Distance traveled (feet or meters) • Area worked per hour • Volume applied per minute (GPM) • Time • PWM Valve control option.

The SCS440SI enables you to preprogram two application rates. Another switch allows you to manually increase or decrease the preprogrammed rate for spot spraying. Serial interface port standard for data logging with Envizio Plus™ or Viper mapping console. 3 Boom switches. The large variety of options make the Raven SCS440SI more flexible than any other spray system. When combined with the Raven Accu-Flow attachment the SCS440SI also provides extremely accurate control of anhydrous ammonia placement.

SCS 4400 Console

Part No. RV SCS440SI RV SCS450SI RV SCS460SI

Consoles Only Net Ea. 3-Boom Console $ 1191.00 6-Boom Console 1369.00 7-Boom Console 1159.00

SCS 4600 Console

- Sprayer Control -

- Sprayer Control -

Ground Speed Compensated Automatic Rate Control. Features: 10 Boom Capacity (7 Boom switches included) • 5 Product Capability • Control Liquid, Dry, NH3 or Chemical Injection • GPS Compatible • Serial Port.

Ground Speed Compensated Automatic Rate Control. Features: 10 Boom Capacity (with separate Boom Switch box) • 5 Product Capability • Control Liquid, Dry, NH3 or Chemical Injection • GPS Compatible • Serial Port.

Other Features: • Clearly Marked Large Keypad • Easy-to-Read, Backlit 1/4” VGA Display • Simple In-Cab CAN Wiring

Other Features: • Clearly Marked Large Keypad • Easy-to-Read, Backlit 1/4” VGA Display • Simple In-Cab CAN Wiring • Remote Switch Box Required (Sold Separately) • Low Limit Function & Rate Pump Features

D

Part No. Description Net Ea. RV SCS4600 SCS4600 Console Only Less Bracket...... $ 1530.00 RV SCS4600F SCS4600 Console With Mount Bracket ... 1490.00

Part No. Description Net Ea. RV 924 SCS4400 Console with... Bracket............................ $ 1573.00

DULTMEIER SALES • OMAHA, NE

D

(800) 228-9666

www.dultmeier.com

• DAVENPORT, IA

(800) 553-6975

E0385


Sprayer Guidance Systems TeeJet Matrix™ PRO GS 570GS Guidance & Mapping System

TeeJet Matrix™ 430 Guidance System

Features:

The Compact Matrix® 430 is an easy-to-use, low cost, graphical guidance system ideal for first time users. The full color, touchscreen display allows the operator to efficiently navigate fields with minimal skips and overlaps in coverage.

• Guidance & Coverage Mapping Simultaneously, in All Terrains • Model 570GS-CAM also includes Video Camera for RealView™ Video Display of Boom or Other Key Sprayer Functions

Features: • Versatile GNSS guidance in a compact, portable package.

• Bright, Daylight Readable 5.7” Screen - Color Touchscreen

• High-contrast, full color, 4.3” graphic touchscreen display provides superior visibility in bright light conditions.

• Easy-to-Use 3D Graphical Guidance D

• Choose Straight AB, Current AB, Last Pass or Circle Pivot Guidance

D • High-quality, internal GPS/GLONASS engine with ClearPath technology that enhances GNSS performance in areas where reception is poor or in regions where SBAS differential correction is not readily available.

• Coverage Mapping/Data Export • Available Option: Droplet Size Monitoring in Real Time • Dry Spreader Control Capability

• Minimal setup needed before operating.

• Optional Droplet Size Monitor

• Guidance modes include: Straight AB, Curved AB, Circle Pivot & Last Pass.

• Applied Area Alarm • Compatible with BoomPilot & Autosteer

• Return-to-point feature allows operator to easily resume jobs or mark field hazards. • Implement ON/OFF status can be manually activated on screen for single or multiple sections or for single section only with status detect wire.

Video Camera

Part No. Description

SS 570GS SS 570GS-RXA SS 570GS-CAM-RXA

Net Ea.

Matrix 570G Guidance/Mapping System (Console, Cables & Patch Antenna)... $ 1929.00 Matrix 570G Guidance/Mapping System with RXA-25 Helix Antenna..... 2263.00 Matrix 570GS Guidance/Mapping/Video Camera System & RXA-25 Helix Antenna 2424.00

• Applied alert provides operator with audible alarm when entering into previously applied areas. • Simple reporting function provides coverage reports in .KML or .PDF format downloaded via USB port.

Part No. Description

SS GD430-PL SS GD430-R30-L

TeeJet Matrix™ PRO 840GS Guidance & Mapping System

D

SS 90-02546 SS 90-XXXXX SS 78-50155 SS 78-50190 SS 90-04006 SS 45-05508

Net Ea.

Matrix 840GS Guidance/Mapping System (Console & Cables).................... $ 2574.00 Matrix 840GS Guidance/Mapping/Video Camera System (Console, Cables & Camera).. 2733.00 Matrix 840GS Guidance/Mapping System with RXA-25 Helix Antenna........ 2889.00 Matrix 840GS Guidance/Mapping/Video Camera System & RXA-25 Helix Antenna.... 3075.00

Part No. Accessories for Matrix 570G & 840G Systems:

This Complete Guidance System is designed to let you take advantage of GPS lightbar guidance for any field operation. Inside the conveniently sized guidance system is a high-quality GPS receiver and the guidance capabilities that make TeeJet leaders in lightbar guidance.

Features: • Straight-line (parallel) and curved AB guidance modes. (not for headrows). • “Return to Point” feature. • Durable, sealed in rubber keypad is easy-to-see and provides good tactile feedback for the operator. • Provides RADAR-like speed signal for use with other control systems that require a speed signal.

Video Camera Part No. Description

Net Ea.

Matrix 430 Guidance System (Cigarette Lighter Lead & Patch Antenna)........... $ 1155.00 Matrix 430 Guidance System (Cigarette Lighter Lead & RXA30 Antenna)......... 1431.00

Centerline 220 Lightbar Guidance System

The Matrix™ 840GS includes the same great features as the above system but with a larger 8.4” screen with even higher resolution. This system supports up to (8) video cameras. The console also includes (3) soft keys to compliment the “Touch Screen”.

SS 840GS SS 840GS-CAM SS 840GS-RXA SS 840GS-CAM-RXA

313

• Versatile GPS guidance in a compact, portable package. WAAS compatible (5 Hz update frequency). • Traditional lightbar guidance plus a graphical display provide complete guidance information. • High-quality Internal GPS engine with external antenna 3’ accuracy. • Simple setup gets you up and running in no time.

NOTE: No Tilt Compensation, or Mapping Capability

D

Net Ea.

Camera Kit...................................................... $ 240.40 Camera Video Selection Module (required when running more than (1) camera).............. CALL Patch Antenna................................................. 107.20 Glonass Patch Antenna with 20’ Cable........... 161.20 Pressure Interface Kit with 32’ Harness for Droplet Size Monitoring................................... 470.10 Adapter Cable for Raven Console....................... 63.55 DULTMEIER SALES • OMAHA, NE

(800) 228-9666

Part No. Description Net Ea. SS 90-02399 Centerline 220 Kit $ 825.00 www.dultmeier.com • DAVENPORT, IA (800) 553-6975

DULTMEIER SALES • OMAHA, NE

(800) 228-9666

www.dultmeier.com

• DAVENPORT, IA

(800) 553-6975

E0878


Sprayer Monitors

314

Sentry 6140 Nozzle Flow Monitor

Sentry 6120 Droplet Size Monitor

Identifying Plugged Spray Nozzles Has Never Been Easier . . .

Provides Real Time Operating Pressure & Corresponding Droplet Size . . .

Plugged or partially blocked spray nozzles can have a significant impact on the quality of your spraying job. Streaks in the field caused by misapplication can result in yield reductions, increased weed pressure and the need to reapply — all of which can be costly. The Sentry 6140 Nozzle Flow Monitor provides a simple, reliable solution to this problem. Flow sensors mounted at each spray nozzle location monitor the flow through the nozzle and provide instantaneous feedback to the operator should a nozzle become clogged.

Features: • Sentry 6140 Utilizes a Compact Flow Meter Integrated Into Each Nozzle Body

Description Net Ea. Sentry Nozzle Flow Monitor Base Kit......................... $ 960.00 Single Flow Sensor Kit............................................... 174.50 Dual Flow Sensor Kit.................................................. 272.40 Replacement Nozzle Flow Meter, Snap In Style........ 57.15

Part No. SS 6120 SS 6120A SS 404-0045 SS 404-0039

Description Net Ea. Droplet Size Monitor with cigarette Lighter Cable.................................... $ 728.00 Droplet Size Monitor with Battery Cable................................... 728.00 Extension Cable, 18’......................... 74.00 Extension Cable, 25’......................... 81.70

Radion 8140 Automatic Sprayer Control Designed with simplicity in mind, Radion offers spraying advantages not found in other controllers. Simply set your target application rated and the unique VisiFlo® display on the controller helps select the right TeeJet nozzle for the application. Once spraying begins, the large display shows application rate, volume sprayed, system pressure, sprayer speed and area covered.

Nozzle Sensor Extension Cables SS 45-05859 12’ Sensor Extension Cable....................................... $ 55.95 SS 45-05864 35’ Sensor Extension Cable....................................... 116.00

Radion’s built-in planning tool automatically displays the available speed range for the target rate and spray nozzle that has been selected. This unique visual planning tool makes choosing the correct spray nozzle for an application a quick and simple task. Radion is available as an individual controller, or in a complete package with the valves, cables and sensors needed to put together a total sprayer control system.

SS 45-05279 Cigarette Lighter Power Cable................................... 61.30

CRUIZER II Kits Raven’s Cruizer provides powerful guidance and mapping technology in an easy to use affordable unit. Simple to install, simple to operate, simple to understand. Raven’s Cruizer is an affordable way to enjoy quick payback through improved efficiency and input savings. Large 5.7” full color touch screen display features easy to understand icon based D menus and status indicators for simple operation Day/Night mode ensures great visibility at any hour of the day. Integrated Lightbar System for additional visibility, guidance and reassurance. Simplified Installation allows you to get your Cruizer on the job in minutes. Cruizer comes with a RAM mount bracket and a 12 Volt cigarette lighter adapter for a simple power source. Stick the magnetic antenna on the top of the cab and go. Simple Upgrades allow you to add Raven assisted steering (SmarTrax), AutoBoom or Raven tilt sensor for more capability, accuracy and efficiency. Description Net Ea. Cruizer II Kit with Patch Antenna....... $ 1657.00 Cruizer II Kit with Helix Antenna........ 1853.00

(800) 228-9666

• Kits Include Console with RAM Mount, Pressure Sensor with 25’ of Cable & 2’ Power Cable

Computer-Controlled Spraying Has Never Been So Easy . . .

Console Extension Cables SS 45-05901 10’ Console Extension Cable..................................... $ 87.20 SS 45-05902 20’ Console Extension Cable..................................... 112.00

DULTMEIER SALES • OMAHA, NE

D

• Save Up to Five Spray Nozzles to Your “Favorites” for Quick Setting Retrieval

The turbine style flow meter used with the Sentry 6140 Nozzle Flow Monitor is compact, reliable and proven.The threaded connection allows the sensor to be added onto a wide range of standard TeeJet single and multiple outlet nozzle bodies. ChemSaver® diaphragm check valves remain in place to provide positive spray nozzle shutoff.

Part No. RV 117-0171-247 RV 117-0171-249

• Image Based Tip Series & Tip Capacity Settings Allow for Simple One-Touch Selection to Choose Your Spray Tip

• Choose US (PSI) or Metric (Bar)

Model 6140 Base Kit Includes: Sentry 6140 console with RAM mount, nozzle flow monitor interface, boom sense interface module, flow interface harness, boom sense interface harness, 2’ power cable and (1) male and female terminators. Extension cables and flow sensors (dual or individual nozzle) are sold separately. Part No. SS 6140 SS 90-02862 SS 90-02861 SS 57-00122

• Bright Backlight Adjustable Touch Screen

• Low & High Pressure Alarms Alert Operator When System Pressure Deviates from Operator-Set Limits

D

• Error is Indicated by Audible Alarm, Display Notification & Illuminated LED at the Affected Nozzle

D

• Provides Real Time Operating Pressure & Corresponding Droplet Size Category Feedback for Liquid Applications

• Nozzle Capacity Selection Setting Uses ISO Color Coding as Well as Text for Easy Identification & Selection

• Flow Meter Detects Flow Variation Caused by Clogs, Lost or Damaged Nozzle or Upstream Flow Restrictions • System Can Monitor Up to 75 Spray Nozzles Simultaneously

Features:

Features: • Large 4.3” Color Touch Screen • Tank Level Monitoring & Automatic Filling Function • Built-In Droplet Size Monitor D • Uses TeeJet 800 Series Cable for Quick Hookup • Available with 5 or 9 Boom Section Switches Plus Master Shutoff • TeeJet Spray Nozzle Database is Programmed into the Radion 8140, Making Nozzle Selection Quick & Easy • Communication Port for Connection to External Variable Rate Controls • Designed for Direct Connection to TeeJet Matrix Consoles for Auto-Section Control Without Extra Devices • Kits Include: Console with RAM Mount, Main Harness & Power Cable (Flowmeter, Pressure Sensor Kit, Regulating Valve & Boom Valves are Extra) Part No. SS 8140-5KIT SS 8140-9KIT SS 8140-5 SS 8140-9 SS 45-20237 SS 90-02476

www.dultmeier.com

Description Radion 8140 Kit with 5 Section Control............... Radion 8140 Kit with 9 Section Control............... Radion 8140 Console Only, 5 Section Control... Radion 8140 Console Only, 9 Section Control... 10’ Extension Cable.............................................. Pressure Switch................................................... • DAVENPORT, IA

(800) 553-6975

Net Ea. $ 1804.00 1671.00 1412.00 1564.00 353.30 230.30

E1044


Fence & End Row Spray System

315

Fence & End Row Spray System Modular Boom Sections

D

D

Control Box

Features & Benefits of Control Box: • Control One or Two Hypro ProStop-E Valves with Easy On/Off Switches.

Switch Control Box 2850-0027

• LED Light Indicator On Each Switch. • 4 Amps. (7 Meter Battery Cable)

• Allows for Retrofit of Sprayers for Adding Fence/End Row Control. • Simple Wiring to Battery & Valves for Plug & Play. • Easy to Mount Bracket Provided.

(7 Meter Backbone Cable)

• Cable Options for Up to 120 ft. Boom Length. (Single End Row Cable, 27 Meter)

3305-0011

Features & Benefits of ProStop-E for Fence/ End Row Control: • Instantaneous On/Off Control with 12-Volt Actuation Eliminates Misapplication & Waste. (Double End Row Y Cable with (2) 20M Segments)

• Eliminates the Need for Using Section Control Valve for Fence/End Row. • High Flow Capacity in Compact Lightweight Design.

3/8” Tube PTC Cap

• Robust, Quarter-Turn Electric Ball Valves are Highly Reliable as Compared to Solenoid & Plunger Valves.

ProStop-E Valve 3/8” Tubing Nozzle Body for 1” Wet Boom PTC-BAY-3/8

Switch Control Box Part No. Description HY 2850-0027 End Row Switch Box ProStop-E Valve Part No. Description HY 3305-0011 ProStop E Valve Cables Part No. Description HY 2520-0218 7M Backbone Cable HY 2520-0217 Single End Row Control 27M Cable HY 2520-0219 Y-Cable with (2) 20 M Segments HY 2520-0216 7M Battery Cable

FCXT020 or FCXT024 Fast Cap Boom X Tender Nozzle

Connection Male 3-Pin for Battery, Female 4-Pin for Control...................................

Net Ea. $ 269.20

Connection ProStop-E Valve Assembly Fits All Hypro ProFlo Nozzle Bodies in Place of the Check Valve.....................................................................

Net Ea.

Connection Threaded, M12 A-Code by M12 A-Code................................................. Threaded, Male 4-Pin M12 by Female 4-Pin M12................................... Threaded, Male 4-Pin by (2) Female 3-Pin M12 A-Code........................ Threaded, Female 3-Pin A-Code by Flying Leads...................................

Net Ea. $ 32.85 65.45 39.40 27.45

$ 81.85

Other Accessories Part No. Description Net Ea. TW PTC-BAY-3/8 Push-To-Connect Nozzle Body, 3/8” Tube x Bayonet End............................................................................... $ 7.13 TW XT020 2.0 GPM Boom X Tender Nozzle - Fast Cap Style.......................................................................................... 57.95 TW XT024 2.4 GPM Boom X Tender Nozzle - Fast Cap Style.......................................................................................... 57.95 TW 4221N-B124V Nozzle Body for 1” Wet Boom, Viton®............................................................................................................. 4.15 TW BG4200-0063 3/8” Tube Push to Connect Cap...................................................................................................................... 4.41

DULTMEIER SALES • OMAHA, NE

(800) 228-9666

www.dultmeier.com

• DAVENPORT, IA

(800) 553-6975

E1127


Monitors • Controllers •Accessories

316

SprayMate II™ Automatic Rate Controller

Calc-An-Acre II™ The Original Speed & Area Monitor Shaft RPM Display

Features:

Features:

• All-In-One Design with Built-In Controls for Up to (3) Separate Boom Sections • On-The-Go Rate Adjustment for a Multitude of Rates • On/Off Power Switch & Master Switch • Flash Memory for Simple Customizing • Ag, NH3 & Turf Units • Records Area & Volume D in (3) Independent Pairs of Counters So Individual Jobs May Be Tracked • Tank Counter Shows Amount Remaining in Tank • Inline/Bypass Option for Regulating Valves • Troubleshooting Enhancements Including “No Speed” & “No Flow” Messages • Push Button Auto/Manual Feature for Spot Treatments • Minimum Flow Feature to Ensure Proper Application Pattern • 20’ Cable Harness Included • See Flowmeter, Speed Sensor & Regulating Valve Options Below Part No. Description

• Accurate Speed, Area and Distance Measurement • Wide Range of Use - Sprayers, Tractors, ATV’s, Trucks, Floaters, etc. • Area Per Hour & Accumulated Hour Functions to Track Progress, Plan Work & Schedule Maintenance

D

• Provides Shaft RPM Readout (with optional shaft sensor kit) • Push Button Run/Hold & Distance Measurement • 3 Independent Area Counters • Displays True Ground Speed to 1/10 MPH Part No. Description

MT 010000 MT 010001 MT 01539

Net Ea.

Calc-An-Acre II with Magnetic Wheel Speed Sensor........................................ $ 309.10 Calc-An-Acre II Less Speed Sensor................. 267.30 Shaft RPM Sensor Kit....................................... 75.30

MT 01341 MT 01171 MT 01196 MT 01192

FlowTrak II™ Applicator Monitor FlowTrak II™ is a user-friendly monitor for farmers, custom applicators and grounds keepers needing a simple, low cost way to verify accuracy when applying liquid herbicides and fertilizers.

SprayMate II™ Controller with Harness............... SprayMate II™ Controller with 3/4” Flowmeter and 1” Regulating Valve........................................ SprayMate II™ Kit with 12 Volt Pump Control: Includes SprayMate II™ Controller, 3/4” Poly Flowmeter (0.5 - 12 GPM), 20’ Cable Harness & 12V Pump Driver (40 amp)....................................... SprayMate II™ Kit with 3/4” Poly Flowmeter 3/4” Regulating (Servo)Valve; 20’ Cable Harness.

Net Ea.

$ 547.00 1026.00

1257.00 1000.00

Features: • Application Rate, Flow Rate, Speed, Distance and Area Per Hour Functions, Plus Three Separate Sets of Area and Total Flow Counters

Flowmeters

D

Includes 5’ Cable

D

• Push Button Run/Hold Feature to Stop Area Count When Turning On Ends and Moving Between Fields. • “Control” Output That Can Turn a Valve or Pump On/Off for Batch Control

Part No.

Description

MT 01500 MT 01501 MT 01504 MT 01514 MT 01511

1/2” Poly Flowmeter (0.5-5 GPM)........... 500 $ 262.40 3/4” Poly Flowmeter (2-40 GPM)............ 500 262.40 3/4” Stainless Flowmeter (2-40 GPM).... 500 460.80 1” Poly Flowmeter (10-100 GPM)........... 175 446.40 2” Poly Flowmeter, SP Flange (19-198 GPM) 285 761.00

Max. PSI

Net Ea.

• Records Total Volume Applied to the Nearest Tenth of a Gallon • Track Tank Volume with a Handy Tank Alarm

D

D

• Triple Counters for Volume and Area 01565 Flanged

• Out of Range Warning Light • Used for Verifying Rate & Other Variables Noted Above but Not For Actual Rate Control. Part No. Description Net Ea.

MT 01170 MT 01021

FlowTrak II™ Monitor Kit with 3/4” Flowmeter...... $ 712.00 FlowTrak II™ Monitor Kit Less Flowmeter............ 461.00

12 Volt Pump Flow Control

Description

MT 14928 MT 01565

1” FPT Regulating Valve........................... $ 214.20 1-1/2” FPT / 2” SP Flange Reg. Valve....... 295.20

Net Ea.

Astro GPS Speed Sensors are a direct replacement for magnetic wheel speed sensors or radar guns. The Astro includes (2) red status lights on the interface module, indicating power and satellite fix. For speed only - not for position.

Enables all current Micro-Trak Rate Controllers to control the rate of flow by regulating the speed of a 12 Volt pump. The EPD replaces the electric servo valve. The EPD will control most 12V pumps to up to a maximum of 40 amps.

D

D

Part No. Description Net Ea.

12 Volt Pump Driver......... $ 407.90

Part No.

Astro II™ Series GPS Speed Sensors

Electric Pump Driver

MT 01757

12 Volt Regulating Servo Valves

Part No.

MT 01410 MT 01425 MT 01430 MT 01432

Description Net Ea. Astro GPS Speed Sensor, 1 Hz................... $ 263.70 Astro GPS Speed Sensor, 5 Hz................... 350.00 Astro GPS Speed Sensor, 5 Hz for RAVEN..... 347.30 Astro GPS Speed Sensor, 5 Hz for TEEJET... 347.30

DULTMEIER SALES • OMAHA, NE

(800) 228-9666

www.dultmeier.com

• DAVENPORT, IA

(800) 553-6975

DULTMEIER SALES • OMAHA, NE

(800) 228-9666

www.dultmeier.com

• DAVENPORT, IA

(800) 553-6975

E0995


Sprayer Regulating Valves & Meters

Hydraulic Regulating Valves

Sprayer System Components Liquid Regulator Valves

D

- For use in standard hydraulic control loops -

D D D

2" & 3” Valve

1" Valve

1-1/2" Valve

90˚ Rotation

Part No. Size Material End Fitting Net Ea. RV 063-0171-120 3/4" Poly Threaded $ 167.70 RV 063-0172-125 1" Poly Threaded & Flanged 268.50 RV 063-0171-894 1-1/2" Poly Threaded & Flanged 300.00 RV 063-0172-177 2" Stainless Threaded 666.00 RV 063-0172-181 3" Stainless Threaded 1209.00 Part No. Size Material End Fitting RV 70008 3/4" Poly Threaded RV 70009 1" Poly Threaded RV 70010 1-1/2" Poly Threaded & Flanged

Maximum Part No. Oil Flow GPM PWM Net Ea. RV 843HYD 15 Yes $ 631.00 RV 846HYD 30 Yes 620.00 RV 063-0172-196 30 No 491.90

Many Models Available Call For Details!

Mag Meters

Net Ea. $ 90.95 214.20 290.90

for Spray Controllers & Applicators RAVEN Mag Meters are an excellent choice for metering liquid manure, suspension fertilizers, deicing liquids and other liquids with solids content which may jam turbine meters Note: Liquids must be electrically conductive; also suitable for wastewater & water. Accuracy: 0.3%. ANSI 150 lb. flanges. Includes 3 pin connector easy connection to Raven flow cables & 2 spade connectors to supply 12 Volt to meter (12 Volt & ground). Will work with any Raven controller including RV 110 flow monitor.

D

On-Off Valves 2” & 3" stainless steel butterfly valves. 12-Volt for use with high volume applications, 300 PSI rating. Viton® o-rings & seals. 1” NH3 valve is carbon steel

D

ball valve, 400 PSI. Part No. Size Material RV 063-0172-978 1" Steel, NH3 RV 063-0172-178 2" Stainless RV 063-0172-182 3" Stainless

PSI Net Ea. 400 $ 477.50 300 674.00 300 1162.00

Part No. RV MAG3 RV MAG4

Flow Meters

Description 3” Mag Meter 4” Mag Meter

Flowrate Range Net Ea. 15-250 GPM $ 5115.00 35-1800 GPM 5115.00

Flow Meters

- For Use with Chemicals & Fertilizer For Use with Raven Rate Controllers & Flow Monitors. 3-Pin Connectors. 0 - 5VDC

With Raven 3 Pin Control 801 & 802 Flow Meters use a turbine style design for reliable and accurate flow measurement for use with automatic sprayer control systems. Rapid Check flow meter insert design allows for fast, easy disassembly for inspection and cleaning while D the 1/4 turn sensor can also be easily removed without exposure 802 to the spray solution. Diagnostic LEDs provide easy troubleshooting in the field.These flow meters are compatible with Raven controllers. Both flow meters also provide precise measurement across wide flow rate ranges for a wide range of sprayer application rates and boom sizes.

RFM60P RFM15

RFM60S

For use in standard hydraulic control loops. Select from various hydraulic capacities: 0-3, 0-8, 0-16 or 0-30 GPM. Adjustable is 3 to 25 GPM. Note: PWM is Pulse Width Modulated.

Use 90° Valves with automatic rate controllers (ground speed oriented). Use 360° Valves with pressure based controllers. All 12V.

360˚ Rotation

317

D D

D

801 Flow Meter Features: Flow range of 2 to 60 GPM • 300 PSI maximum pressure • 50 Series flange connection. 802 Flow Meter Features: Flow range of 3 to 130 GPM • 200 PSI maximum pressure • 75 Series flange connection.

D

RFM100

RFM200POLY

Banjo Part No. GPM Size Flanged RV RFM15 .3-15 1-1/2" FPT M200 RV RFM60P 1-55 1-1/2" FPT M200 RV RFM60S 1-60 1-1/2" FPT No RV RFM100 5-100 2" FPT M220 RV RFM200POLY 15-200 3" FPT M300

Material Net Ea. Poly $ 295.70 Poly 401.40 Stainless 625.00 Poly 667.00 Poly 975.00

Flange Part No. GPM PSI Material Connection SS 801 2-60 300 Poly 50 Series SS 802 3-130 200 Poly 75 Series

Net Ea. $ 348.50 371.50

Viton® is a registered trademark of DuPont Performance Elastomers

DULTMEIER SALES • OMAHA, NE

(800) 228-9666

www.dultmeier.com

• DAVENPORT, IA

(800) 553-6975

E0387


318

Guidance Receivers • GPS Sensors • Pipe Mixers Guidance Receivers GPS Velocity Sensor

Phoenix 200 Raven’s Phoenix 200 presents an economical, high-performance sub-meter receiver capable of utilizing two differential correction solutions. With an optional upgrade to e-Dif extended differential technology, the Phoenix 200 is capable of achieving GPS accuracy of a few feet without the need for a differential signal broadcast.

D

D

Standard Features: • Completely self-contained (GPS receiver, antenna, and velocity to pulses converter)

Part No. Description Net Ea. RV 117-0171-071 Phoenix 200................................. $ 1519.00

With Universal Mounting Bracket

Physical Specifications Enclosure: UV stable plastic, fully sealed Cable Length: 15 feet Power: 8 to 16 Volts, 0.1 Amps max. Size: 4.50 x 2.43 Operating Temp: -30 C to +65 C (-22 F to +140 F)

Phoenix 300 Raven’s Phoenix 300 is a WAAS CDGPS and OmniSTAR VBS capable receiver that can be upgraded to OmniSTAR XP and HP (subscription service). It is capable of both sub-meter and decimeter correction accuracies dependant on the correction signal being used. It also has simulated radar output for use as a speed sensor on your application controls.

Part No. ST 1000R ST 1000-D

• Dickey-John radar 4-pin connector • 8 Channel GPS receiver • 58.94 pulses / MPH (Can be used with all equipment that is compatible with radar type speed sensors) • 0.1 MPH accuracy from 0.5 to 50 MPH (9 Hz update rate). • Surface, bracket, pipe, or magnetic mount

Used With: Raven Dickey-John

Update Rate Net Ea. 9 Hz $ 443.40 9 Hz 443.40

GPS Speed Sensors use a GPS receiver to measure true ground speed and delivers a frequency signal compatible with the radar signal speed input on most controls and monitors. Convenient enclosure mounts inside cab with a small patch antenna mounted outside. Enclosure has LED status for power, GPS lock D and speed output conditions. 6’ Cable plus 13’ cable to patch antenna. Wide range of adapter cables to make it compatible with all popular application systems. 5Hz update rate. WAAS only.

Phoenix 10

Part No. Description RV 117-0171-165 Phoenix 10.........................

• Raven® 3-pin Radar Connector

GPS Speed Sensors

Part No. Description Net Ea. RV 117-0171-097 Phoenix 300......................................... $ 3748.00

Raven’s Phoenix 10 speed sensor provides a simulated RADAR output, giving a cost-effective and simple method to provide ground speed measurement for application controllers using GPS technology.

Never Buy Another Radar Gun! The SkyTrak velocity sensor brings the accuracy and ease of installation of a GPS receiver to equipment designed to measure speed pulses, such as automatic rate. Note: For velocity only, not for Guidance.

D

Part No. SS 90-02371 SS 90-02386 SS 90-02404

Net Ea. $ 525.00

Description Net Ea. GPS Speed Sensor for Mid-Tech......... $ 370.50 GPS Speed Sensor for TeeJet............. 370.50 GPS Speed Sensor for Raven............. 370.50

Other TeeJet Speed Sensors: SS 16-40004 SS 16-40003 SS 16-40007

Phoenix 50 Raven’s Phoenix 50 GPS receiver can provide ground speed output (simulated RADAR signal) as well as standard NMEA GPS output on two serial ports. This gives you the ability to provide position updates at 4 times per second (4Hz) and output a speed signal. (Recommended for data logging only, not guidance).

Sensor, Proximity Speed......................... $ 76.00 Sensor, Wheel Speed............................. 102.00 Sensor, Wheel Speed Kit with (2) Magnets & Bracket............................ 125.60

Inline Motionless (Static) Pipe Mixers

D

Inline Static Mixers provide dual swirling action for effective mixing of liquids passing through them. No power source is required.There are no moving parts; just fixed elements inside the pipe. You can also install them downstream of a tee or manifold system to provide thorough mixing of two or more liquids into one solution.

Part No. Description Net Ea. RV 117-0171-149 Phoenix 50, Single Port..... $ 776.00 RV 117-0171-164 Phoenix 50, Dual Port........ 839.00

D

Bodies are polypropylene (stainless steel on 3”) for excellent chemical compatibility with most liquids. Polypropylene models pressure rating is 175 PSI, temperature rating is 160° F. Part No. Diameter Material Ports RV MIX1 1” Polypropylene 1” FPT RV MIX1-1/4 1-1/4” Polypropylene 1-1/4” FPT RV MIX2 2” Polypropylene 2" FPT RV MIX3 3” 316SS 3” MPT * CV= GPM

Length * CV Net Ea. 12-1/4” 25 $ 163.20 12-1/4” 25 162.50 13-1/4” 25 184.80 18” 60 642.00

Pressure Drop

DULTMEIER SALES • OMAHA, NE

(800) 228-9666

www.dultmeier.com

• DAVENPORT, IA

(800) 553-6975

E0647


“T” Line Strainers Strainers

319

122-1/2PP 1/2” & 3/4” Poly

Spraying Systems Strainers are available in a wide variety of materials and screens. Heads are made of polypropylene and cast iron. Bowls are constructed of polypropylene and nylon. Features: Stainless Steel Screens with color-coded polypropylene frames • Maximum Temperatures up to 100° F. • EPDM Gasket on polypropylene heads • Buna on 1-1/4" to 2" sizes. Note: 126ML strainers have a removable cap for flush-out operations. 200 PSI, 70° F. — Note: Specify Screen Size if Other than Shown —

D

AA126ML Flanged Poly

STRAINERS

AA126ML Threaded Poly

Part No. Size Description PSI Mesh GPM Net Ea. SS 122-1/2PP 1/2" Strainer, Poly Head & Bowl.............. 150 50 12 $ 10.35 SS 122-3/4PP 3/4" Strainer, Poly Head & Bowl.............. 150 50 16 10.35 SS AA126ML-350 3/4” Strainer, Poly Head & Bowl.............. 200 50 23 19.10 SS AA126ML-430 1” Strainer, Poly Head & Bowl.............. 200 30 35 19.10 SS AA126ML-F5050 *1” Flanged Strainer, Poly Head & Bowl 200 50 35 19.10 SS AA126ML-F5080 *1” Flanged Strainer, Poly Head & Bowl 200 80 35 19.10 SS AA126ML-530 1-1/4” Strainer, Poly Head & Bowl.............. 200 30 59 39.05 SS AA126ML-630 1-1/2” Strainer, Poly Head & Bowl.............. 200 30 59 39.05 SS AA126ML-F7550 **2” Flanged Strainer, Poly Head & Bowl 200 50 59 39.05 SS 124-1-1/2-I30 1-1/2" Strainer with CI Head & Nylon Bowl. 150 30 70 82.90 SS 124-2-I30 2" Strainer with CI Head & Nylon Bowl. 150 30 160 188.00 * 50mm Flange same as Banjo 1”. ** 75mm Flange same as Banjo 2” Standard Port.

Parts for 122PP Strainers

D

D

Part No. Net Ea. SS 23174-1 16 Mesh Screen, Brwn/Red. $ 5.02 SS 23174-2 30 Mesh Screen, Red........... 4.97 SS 23174-3 50 Mesh Screen, Blue.......... 4.72 SS 23174-5 100 Mesh Screen, Green..... 4.72 SS CP23172PP Polypropylene Bowl..... 5.88 SS CP23173-EPR EPDM Gasket............. 3.79

Screen Mesh Openings Mesh Size of Size Color Opening 16 Brown Red .045" 30 Red .021" 50 Blue .011" 80 Yellow .007" 100 Green .006" 200 Lt. Pink .003"

Strainer Colors shown will now meet ISO Standards

Parts for 124A & 126ML - 3/4" & 1"

Part No. Net Ea. SS 16903-1 16 Mesh Screen, Brwn/Red $ 10.85 SS 16903-3 30 Mesh Screen, Red.......... 10.85 SS 16903-4 50 Mesh Screen, Blue......... 10.85 SS 16903-5 80 Mesh Screen, Yellow...... 10.85 SS CP15403-NY Nylon Bowl................... 16.80 SS 7717EPR EPDM Gasket.............. 4.49

Parts for 124 & 126ML 1-1/4” & 1-1/2”

Parts for 124 - 2" Strainers

Part No. Net Ea. SS 14634-1 16 Mesh Screen, Brwn/Red.. $ 43.20 SS 14634-2 30 Mesh Screen, Red ........... 43.20 SS 14634-3 50 Mesh Screen, Blue........... 43.20 SS 14634-4 80 Mesh Screen, Yellow........ 43.20 SS 14633BU Buna Gasket.......................... 6.11 SS 14633VI Viton® Gasket........................ 28.75 SS 14635NY Nylon Bowl............................. 54.50

Part No. Net Ea. SS 15941-1 16 Mesh Screen, Brwn/Red. $ 15.15 SS 15941-2 30 Mesh Screen, Red.......... 15.15 SS 15941-3 50 Mesh Screen, Blue......... 15.15 SS 15941-4 80 Mesh Screen, Yellow...... 15.15 SS CP12291BU Buna Gasket for #124 3.94 SS 12291VI Viton® Gasket for #124 10.65 SS CP48656EPR EPDM Gasket for #126M 3.61 SS CP48656VI Viton® Gasket for #126M 7.54 SS 12288NY Nylon Bowl for 1-1/2" #124 29.10 SS CP48654PP Poly Propylene Bowl for 1-1/4” & 1-1/2” #126 16.70

1-1/2” & 2” 124 Cast Iron

D

Viton® is a registered trademark of DuPont Performance Elastomers

Polypropylene

“T” Line Strainers FEATURES:

D

• Heavy-Duty Glass Reinforced Polypropylene

• 304 Stainless Steel Polypropylene Reinforced Screens

• Clean-Out Plug

• 150 PSI @ 70° F.

• EPDM Gaskets

• Flanged Models Also Available

STRAINERS

D

3/4" & 1" 1-1/4" & 1-1/2"

Part No. TK LST075-50 TK LST075-80 TK LST100-30 TK LST100-50 TK LST125-30 TK LST150-30

Size 3/4" Poly “T” Strainer 3/4" Poly “T” Stainer 1" Poly “T” Strainer 1" Poly “T” Strainer 1-1/4" Poly “T” Strainer 1-1/2" Poly “T” Strainer

Parts for 3/4" & 1" Strainers

Cut-Away View 3/4" to 1-1/2" Sizes (Typical)

Part No. Rib Color Net Ea. TK LST130 30 Mesh Screen Red $ 13.50 TK LST150 50 Mesh Screen Blue 12.30 TK LST180 80 Mesh Screen Yellow 12.30 TK LST1100 100 Mesh Screen Green 13.50 TK LST100B Poly “T” Strainer Bowl 9.24 TK LST100G Poly “T” Strainer Gasket-EPDM 2.46 TK LST100GV Poly “T” Strainer Gasket-Viton® 5.07 TK 13778 Screen O-Ring.......................... 1.23

DULTMEIER SALES • OMAHA, NE

(800) 228-9666

www.dultmeier.com

Mesh 50 80 30 50 30 30

Max. PSI 150 PSI @ 70° F. 150 PSI @ 70° F. 150 PSI @ 70° F. 150 PSI @ 70° F 150 PSI @ 70° F. 150 PSI @ 70° F.

Net Ea. $ 18.90 20.80 20.80 18.90 41.40 41.45

Parts for 1-1/4" & 1-1/2" Strainers Part No. Rib Color Net Ea. TK LST1530 30 Mesh Screen Red $ 20.75 TK LST1550 50 Mesh Screen Blue 20.75 TK LST1580 80 Mesh Screen Yellow 20.75 TK LST15100 100 Mesh Screen Green 20.75 TK LST150B Poly “T” Strainer Bowl...... 15.45 TK LST150G Poly “T” Strainer Gasket-EPDM 2.45 TK LST150GV Poly “T” Strainer Gasket-Viton® 5.67 TK LST034G Screen O-Ring................... 1.78

• DAVENPORT, IA

(800) 553-6975

E0394


“T” Line Strainers

320

“T” Line Strainers

Self-Cleaning “T” Line Strainers

Compact "T" Style Line Strainers with large filter areas for better filtration of liquids. Strainer elements can be easily cleaned or replaced without removing the entire strainer from the system. Tops and bowls feature heavy FNPT threads to prevent cross-threading. Rated to 150 psi at 70° F. or 100 psi at 125° F. Note: Do not use these strainers in systems where pressure spikes in excess of maximum operating pressure can be expected. All strainers are standard with 304SS wire mesh screens in 50 or 80 mesh sizes. 80 Mesh is 178 micron rating. Sealing gaskets are "Viton®" on all models.

D

Upper strainer caps are White Nylon construction. All strainer bowls are available in (white-nylon) or (clear-polymide). Both strainer types work well with many chemicals. (Specific compatibility should be checked for all chemical uses. Nylon bowls are OK for alcohol fuels, not for acids. Polymide Bowls are OK for acids, not for alcohol fuels. Clear Bowls are available in either).

AA126 Strainers are made of glass filled polypropylene and are available in 3/4”, 1”, 1-1/4” and 1-1/2” as well as 50 and 75 series flange connection. They use a 304 stainless steel strainer element: No. CP12285 for 3/4” & 1”; CP12290 for 1-1/4” and 1-1/2”.

All strainers are standard with female pipe threads (FNPT) except for 3350-82F "mini-strainer" which has 1/2" MPT x 1/4" FPT ports. 3350-44N

TeeJet Self Cleaning Strainers extend your spraying time with a self-cleaning feature that minimizes clogging. The tapered inner cylinder inside the entire length of the screen provides a gap between the screen face and the cylinder. This gap causes the inlet fluid to flow at a high velocity past the screen face providing for a continuous wash down of particles to the bypass line.

Part No. Size Screen GPM Net Ea. SS AA126MLSC350 3/4” 50 23 $ 29.50 SS AA126MLSC450 1” 50 35 29.50 SS AA126MLSC530 1-1/4” 30 59 49.45 SS AA126MLSC6100 1-1/2” 100 77 49.50 SS AA126MLSC650 1-1/2” 50 77 49.50 Note: Screens are available in 16, 30, 50, 80 and 100 Mesh

3350-44P Clear Bowl

D

3350-82F

HEAVY DUTY 1-1/2 & 2"

“T” Line Strainers Bowl is glass-reinforced Nylon for corrosion resistance and good impact strength. Screens are stainless steel Buna-N gaskets are standard, however Viton® replacements are listed below. Cast iron head offers high resistance to vibrations and installation stresses. Designed for operating pressure to 150 PSI at temperatures up to 100° F. Bowl turns off by hand for fast, easy screen cleaning. Extra high screen area permits maximum flow rates and longer operating periods between cleaning.

D D

Part No. HY 3350-82F HY 3350-42N HY 3350-42P HY 3350-68N HY 3350-68P HY 3350-44N HY 3350-44P HY 3350-45N HY 3350-45P HY 3350-61N HY 3350-61P HY 3350-62N HY 3350-62P HY 3350-75N HY 3350-75P HY 3350-116N HY 3350-116P

CAP

BOWL GASKET

REPAIR PARTS

SCREEN

Ports Bowl Screen 1/2" MPT Clear 80-Mesh 1/2" FPT White 50-Mesh 1/2" FPT Clear 50-Mesh 1/2" FPT White 80-Mesh 1/2" FPT Clear 80-Mesh 3/4" FPT White 50-Mesh 3/4" FPT Clear 50-Mesh 3/4" FPT White 80-Mesh 3/4" FPT Clear 80-Mesh 1" FPT White 50-Mesh 1" FPT Clear 50-Mesh 1" FPT White 80-Mesh 1" FPT Clear 80-Mesh 1-1/4" FPT White 50-Mesh 1-1/4" FPT Clear 50-Mesh 1-1/2" FPT White 50-Mesh 1-1/2" FPT Clear 50-Mesh Less 10% on 12 Assorted

Net Ea. $ 9.63 14.20 20.60 15.95 17.40 14.35 20.80 16.30 22.75 22.50 28.90 25.30 31.40 25.85 38.80 28.40 41.45

Part No.

Part No. Size Description Net Ea. HY 3351-7 1/2” Strainer Cap................. $ 6.68 HY 3351-6 3/4” Strainer Cap................. 8.36 HY 3351-14 1” Strainer Cap................. 14.20 HY 3351-16 1-1/4” Strainer Cap................. 16.95 HY 3351-26 1-1/2” Strainer Cap................. 18.80 HY 3351-5 3/4” * Strainer Bowl, White Bowl 4.91 HY 3351-15 3/4” * Strainer Bowl, Clear Bowl 14.05 HY 3351-13 1”, 1-1/4”, 1-1/2” * Strainer Bowl, White Bowl 10.85 HY 3351-24 1”, 1-1/4”, 1-1/2” * Strainer Bowl, Clear Bowl 26.55 HY 1700-44 1/2" & 3/4" Buna Gasket................ .72 HY 1700-45 1/2" & 3/4" Viton® Gasket.............. 5.38 HY 1700-57 1", 1-1/4”, 1-1/2” Buna Gasket................ 1.01 HY 1700-58 1", 1-1/4”, 1-1/2” Viton® Gasket.............. 7.16 HY 3800-29 1/2" & 3/4" 20-mesh Stainless Screen 5.92 HY 3800-25 1/2" & 3/4" 50-mesh Stainless Screen 4.98 HY 3800-26 1/2" & 3/4" 80-mesh Stainless Screen 8.00 HY 3800-40 1" 20-mesh Stainless Screen 7.38 HY 3800-41 1" 50-mesh Stainless Screen 7.38 HY 3800-42 1" 80-mesh Stainless Screen 12.50 HY 3800-43 1-1/4" 20-mesh Stainless Screen 7.38 HY 3800-44 1-1/4" 50-mesh Stainless Screen 7.38 HY 3800-45 1-1/4" 80-mesh Stainless Screen 14.05 HY 3800-65 1-1/2" 20-mesh Stainless Screen 12.35 HY 3800-66 1-1/2" 50-mesh Stainless Screen 10.90 HY 3800-67 1-1/2" 80-mesh Stainless Screen 17.50 * NOTE: Use White Nylon Bowls for alcohol fuels. Not for Acid Based Liquids. Clear Polymide Bowls are alright for Acids, but Not for Alcohol Fuels.

DULTMEIER SALES • OMAHA, NE

(800) 228-9666

SCREEN

PORTS

MATERIAL

Net Ea.

SS 124-1-1/2-I30 30-Mesh SS 124-2-I30 30-Mesh

1-1/2" 2"

Cast Iron Cast Iron

$ 82.90 188.00

Model 124

STRAINER REPAIR PARTS

D

Repair Parts List

Strainer Part No. Description Size Net Ea. SS 15941-1 Brown/Red Screen (16-mesh) 1-1/2" $ 15.15 SS 15941-2 Red Screen (30-mesh) 1-1/2" 15.15 SS 15941-3 Blue Screen (50-mesh) 1-1/2" 15.15 SS 15941-4 Yellow Screen (80-mesh) 1-1/2" 15.15 SS 12291VI Viton® O-Ring................................... 1-1/2" 10.65 SS 12288NY Nylon Bowl ........................................ 1-1/2" 29.10 SS 14634-1 Brown/Red Screen (16-mesh)....... 2" 43.20 SS 14634-2 Red Screen (30-mesh)....... 2" 43.20 SS 14634-3 Blue Screen (50-mesh)....... 2" 43.20 SS 14634-4 Yellow Screen (80-mesh)....... 2" 43.20 SS 14633BU Buna O-Ring..................................... 2" 6.11 SS 14635NY Nylon Bowl ........................................ 2" 54.50

Find Us on Facebook and Twitter

Viton® is a registered trademark of DuPont Performance Elastomers

www.dultmeier.com

• DAVENPORT, IA

(800) 553-6975

E0395


“Y” & “T” Strainers Line Strainers

Flanged "T" Strainers EPDM Gaskets • 150 PSI • Stainless Screens

Polypropylene Line Strainers are highly corrosion resistant. For use in handling liquid fertilizer & other chemical solutions. Bottom opening type. EPDM Gasket and cleanout plug.

D

3/4" THRU 2"

• 75 PSI on 1/2" to 1-1/4" • 150 PSI on 1-1/2" to 2" • 75 PSI on 3"

3"

3" BANJO Line Strainer Molded Polypropylene construction. For easy quick cleaning unscrew end cap. Includes a 1/2" drain plug. Stainless Steel screens available in the following sizes:4, 8, 12, 20, and 50.

D

3” FPT

Part No.

TK LS075-40 TK LS075-80 TK LS100-40 TK LS100-80 TK LS125-40 TK LS150-20 TK LS200-20 TK LSM300BC

Ports

3/4" FPT 3/4" FPT 1" FPT 1" FPT 1-1/4" FPT 1-1/2" FPT 2" FPT 3" FPT

Screen

40-Mesh 80-Mesh 40-Mesh 80-Mesh 40-Mesh 20-Mesh 20-Mesh None

LSQ Polypropylene Line Strainers

D

Net Ea.

2" Standard Port • EPDM Gaskets • 150 PSI W.P. • Stainless Screens

$ 17.95 19.70 17.95 19.60 19.70 39.30 39.30 189.00

D

D

Part No. Description Net Ea. TK MLS200-50 50 Mesh 2" Strainer Std. Port................... $ 48.95 TK LS220 20 Mesh Replacement Screen for 2", Beige... 27.85 TK LS250 50 Mesh Replacement Screen for 2", Blue..... 27.85 TK LS280 80 Mesh Replacement Screen for 2", Yellow.. 27.85 TK LS141G Screen O-Ring for 2”........................................ 2.70 2” Screens Also Available in 6, 12, 30, 100 & 120 Mesh.

Flanged "Y" Strainers 2” & 3” Full Port D

• EPDM Gaskets • 75 PSI W.P. • 304 Stainless Screens Part No. Description TK MLS222-50 * 2" Full Port Flanged "Y" Strainer with 50 Mesh Screen........................ TK MLS300-20 ** 3” Full Port Flanged “Y” Strainer with 20 Mesh Screen........................ TK LST210SS 10 Mesh Stainless Screen, 2”, FP.... TK LST216SS 16 Mesh Stainless Screen, 2”, FP.... TK LST230SS 30 Mesh Stainless Screen, 2”, FP.... TK LST250SS 50 Mesh Stainless Screen, 2”, FP.... TK LST280SS 80 Mesh Stainless Screen, 2”, FP.... TK LS141G Screen O-Ring for 2” FP...................

Net Ea. $ 67.95 248.40 42.05 42.05 38.25 38.25 42.05 2.70

* 2” FP Screens Also Available in 4, 8, & 100 Mesh. ** For Other 3” Screens: LS304, LS308, LS312, LS320, LS350. D

with Cam Lever Cap

Part No.

Part No. Description Net Ea. TK MLST100-50 50 Mesh 1" Strainer................................. $ 22.95 TK MLST150-50 50 Mesh 2" Strainer................................. 38.80 TK LST130 30 Mesh Replacement Screen for 1", Red...... 13.50 TK LST150 50 Mesh Replacement Screen for 1", Blue..... 12.30 TK LST180 80 Mesh Replacement Screen for 1", Yellow.. 12.30 TK LST1530 30 Mesh Replacement Screen for 2", Red...... 20.75 TK LST1550 50 Mesh Replacement Screen for 2", Blue..... 20.75 TK LST1580 80 Mesh Replacement Screen for 2", Yellow.. 20.75 TK 13778 Screen O-Ring for 3/4” & 1”............................. 1.23 TK LST034G Screen O-Ring for 2”........................................ 1.78 16 & 100 Mesh also available.

2” Flanged "Y" Strainers

Part No. REPLACEMENT STRAINER PARTS Rib Color Net Ea. TK LS720 20-Mesh “SS” Screen for 1/2"& 3/4" Beige $ 15.45 TK LS740 40-Mesh “SS” Screen for 1/2"& 3/4" Brown 14.05 TK LS780 80-Mesh “SS” Screen for 1/2"& 3/4" Yellow 15.45 TK LS120 20-Mesh “SS” Screen for 1"& 1-1/4" Beige 15.45 TK LS140 40-Mesh “SS” Screen for 1"& 1-1/4" Brown 15.45 TK LS180 80-Mesh “SS” Screen for 1"& 1-1/4" Yellow 14.05 TK LS206 6-Mesh “SS” Screen for 1-1/2"& 2" White 30.60 TK LS212 12-Mesh “SS” Screen for 1-1/2"& 2" Black 27.85 TK LS220 20-Mesh “SS” Screen for 1-1/2"& 2" Beige 27.85 TK LS250 50-Mesh “SS” Screen for 1-1/2"& 2" Blue 27.85 TK LS280 80-Mesh “SS” Screen for 1-1/2"& 2" Yellow 27.85 TK LS304 4-Mesh “SS” Screen for 3" Stainless 83.45 TK LS308 8-Mesh “SS” Screen for 3" Stainless 73.20 TK LS312 12-Mesh “SS” Screen for 3" Stainless 73.20 TK LS320 20-Mesh “SS” Screen for 3" Stainless 66.55 TK LS350 50-Mesh “SS” Screen for 3" Stainless 66.55 TK LS075G O-Ring Gasket for 1/2" & 3/4" Strainer...................... 1.86 TK LS100G O-Ring Gasket for 1" & 1-1/4" Strainer...................... 2.46 TK LS150G O-Ring Gasket for 1-1/2" & 2" Strainer - 1994 on...... 2.46 TK LS200G O-Ring Gasket for 1-1/2" & 2" Strainer - Prior to 1994 2.45 TK LS300G O-Ring Gasket for 3" Strainer - Prior to 1994............ 8.67 TK LS300G1 O-Ring / 3" Strainer - 1994 - 2008............................. 8.67 TK LS300ECG * Gasket / 3" Strainer - 2008 on................................. 8.67 TK MLS300G * Gasket / 3” Strainer - 2008 on................................. 4.46 TK LS125G Screen O-Ring for 1” & 1-1/4” Strainer...................... 1.56 TK LS141G Screen O-Ring for 1-1/2” & 2” Strainer...................... 2.70 * Latest 3” Strainers use (1) of Each.

Note: Screens are the same as those used for the original Banjo strainers shown above.

321

SERVICE & REPAIRS

Quick Clean Out Style

• Precision molded in glass reinforced polypropylene • Cam lever configuration for easy access for cleaning and servicing • 3/4" plug in cam lever cap for attaching ball valve for draining or back flushing • Stainless steel screen • EPDM lathe cut gasket. • 75 PSI maximum working pressure. FPT Ports Stainless Screen

Did you know? We can service almost every brand of pump we sell in our catalog.

Call us at 1-800-228-9666 (Omaha, NE) for a quote!

Net Ea.

TK LSQ150-20 1-1/2" 20-mesh $ 62.45 TK LSQ200-20 2" 20-mesh 62.45 TK LSQ200G Gasket, Fits 1-1/2" thru 2" Strainers....... 5.06 TK LSQ200CAP Cap for 1-1/4" to 2" Strainers .......... 46.00 Other Screens Available - See Above. DULTMEIER SALES • OMAHA, NE

(800) 228-9666

www.dultmeier.com

• DAVENPORT, IA

(800) 553-6975

E0397


Strainers

322 Dia.

H

3" Stainless Steel Line Strainers

End Line Strainers D

104 Series & Series 3350-21/22

End Line Suction Strainers are ideal for water supply or chemical lines. Protects pumps and injectors from sediment or foreign particles. For tanks, tubing or hose. Pushes over tubing or hose. Sizes shown.

104 Series are standard with FPT pipe threads on the inlet and 40 mesh screens. Bodies are PVC. Ideal for suction lines in supply tanks. 3350-21, 22 & 33 are designed with female hose barb inlet so that tubing, hose or hose barbs can be directly installed. 40 or 50 3350-69 & 3350-32 mesh screens standard. Bodies are PVC. 3350-32 & 69 are 7" long and feature 80 mesh screens. Available with hose barb or pipe thread D inlet. Bodies are Nylon. Larger screen surface for 3800-35 better filtering. 3800-35 is an in-line garden hose gasket/strainer, PVC construction, stainless steel screen. Length/ Part No. Inlet Fits Diameter Height Mesh Net Ea. HY 3350-22 1/8” PT 1" 3/4" 50 $ 2.82 HY 3350-21 1/8” PT 1-1/4" 1" 50 3.11 TW 10406 3/8" PT 1-1/2" 1-1/8" 40 4.57 TW 10416 3/8" PT 1-1/2" 1-1/4" 40 5.24 TW 10421 1/2" PT 1-3/4" 1-1/2" 40 6.32 HY 3350-33 3/4” PT 2" 1-1/2" 40 4.14 TW 10446 1" FPT 3" 2-1/4" 40 10.85 TW 10442 1” FPT 3” 2-1/2” 20 10.85 TW 10464 1-1/2" FPT 3" 2-1/2" 40 12.40 HY 3350-32 3/4" M Hose Barb 1-1/4" 7" 50 11.30 HY 3350-69 3/4" MPT 1-1/4" 7" 50 11.15 HY 3800-35 Garden Hose Strainer 5/8" 1/2" 50 .35

Ports 1/4"FPT 1/4"FPT 3/8"FPT 3/8"FPT 1/2"FPT 1/2"FPT 3/4"FPT 3/4"FPT 1-1/2" FPT 2" FPT

WATTS Cast Iron Strainers

D

77FD

Flanged

77S

D

Threaded

Dimensions Screen Body “A” “B” Net Ea. 40-Mesh Bronze 1-1/4" 1-1/4" $ 20.25 80-Mesh Bronze 1-1/4" 1-1/4" 20.25 40-Mesh Bronze 2-1/4" 1-1/4" 20.40 80-Mesh Bronze 2-1/4" 1-1/4" 20.25 40-Mesh Bronze 2-1/2" 1-1/2" 24.35 80-Mesh Bronze 2-1/2" 1-1/2" 24.35 40-Mesh Bronze 3-1/4" 2" 47.40 80-Mesh Bronze 3-1/4" 2" 47.40 20-Mesh Bronze 5-7/8" 3-3/4" 78.55 20-Mesh Bronze 6-3/16" 5-7/8" 127.80

Features: 400 PSI WOG on threaded -200 PSI WOG on flanged • Stainless screens • Threaded opening is 1” • Can be self cleaned through the blow off hole. Note:1” Plug or valve not supplied • Install strainers upstream of valve/Pumps/Meters.

Note: Strainers are cast iron and not suitable for NH3/LPG which require a ductile iron strainer. FPT Stainless Wt. Part No. Ports Style Screen Lbs. Net Ea. WS 77S-3/4 3/4" Threaded 20-Mesh 2.5 $ 13.45 WS 77S-1 1" Threaded 20-Mesh 4 19.15 WS 77S-1-1/4 1-1/4" Threaded 20-Mesh 4.5 32.55 WS 77S-1-1/2 1-1/2" Threaded 20-Mesh 6.5 31.15 WS 77S-2 2" Threaded 20-Mesh 13 48.45 WS 77S-2-1/2 2-1/2" Threaded 20-Mesh 30 116.00 WS 77S-3 3” Threaded 20-Mesh 37 173.30 WS 77FD2 2" Flanged 1/16" Perforation 17 128.30 WS 77FD3 3" Flanged 1/16" Perforation 34 118.70 WS 77FD4 4" Flanged 1/16" Perforation 60 239.40 WS 77FD6 6" Flanged 1/8" Perforation 150 342.40

MORRISON

PAGET Ductile Iron Strainers for NH3 & LPG 600 PSI Steam - 1000 PSI WOG Ductile Iron Strainers protect valves, pumps, and other equipment against damage from dirt and foreign material. These strainers can be installed either horizontally or vertically. Body is ductile iron with stainless steel screen. Comes less drain plug.

Part No. Wt. Net Ea. TK LSS-300B/C 3" SS Strainer less screen....... 25 lbs. $ 568.00 TK LSS308 8 Mesh Screen only................. 1 lb. 53.85 TK LSS312 12 Mesh Screen only............... 1 lb. 53.85 TK LSS320 20 Mesh Screen only............... 1 lb. 53.85 TK LSS330 30 Mesh Screen only............... 1 lb. 53.85 TK LSS350 50 Mesh Screen only............... 1 lb. 53.85 TK LSS300S Screen Seal - (2 required)....... - 5.07 TK LSS300G Cap Gasket - (1 required)........ - 5.67

– Not For LPG or NH3 –

Bronze with Stainless Steel Screens. Y-Type design is perfect for those hard-to-get-at spots. Quick cleaning when required. Pressures Rated to 300 PSI @ 150° F. or 125 PSI @ 400° F. 1/4" through 1" are Dema brand. 1-1/2" and 2" are Watts brand.

Part No. DE S2B-40 DE S2B-80 DE S3B-40 DE S3B-80 DE S4B-40 DE S4B-80 DE S6B-40 DE S6B-80 WS 777-1-1/2 WS 777S-2

D

3/4" - 2" Threaded 2" - 6" ANSI Flanged

Y-TYPE Strainers D

3" Stainless Steel Line Strainer from Banjo. Standard Features include: • 304 Stainless Steel Construction • Low Flow Resistance • Corrosion Resistant Components • EPDM Rubber Seals • Rated to 200 PSI • Strainer is sold less the screen • 5 different mesh screens to choose from.

Bottom Cleanout Line Strainers

D

• Cast Iron Body & Cap • Malleable Iron Yoke • Graphite Asbestos Gasket • Stainless Steel Screen • Available with Flanged Connections & Other Screen Sizes

Stainless Part No. Port Size Screen WT. Net Ea. MB 285-1-1/2 1-1/2" FPT 20-Mesh 10 lbs. $ 110.00 MB 285-2 2" FPT 20-Mesh 14 lbs. 129.00 MB 285-3 3" FPT 20-Mesh 27 lbs. 219.00 MB 285-4 4" FPT 14-Mesh - 586.00 MB 285-4F *4” FPT Flanged 20-Mesh - 1218.00

D

REPLACEMENT SCREENS for MORRISON 285 Strainers MB 6S10-1-1/2 1-1/2" FPT 10-Mesh - $ 49.50 MB 6S20-1-1/2 1-1/2" FPT 20-Mesh - 49.50 MB 6S40-1-1/2 1-1/2" FPT 40-Mesh - 49.50 MB 6S60-1-1/2 1-1/2" FPT 60-Mesh - 49.50 MB 6S06-2 2" FPT 6-Mesh - 58.50 MB 6S10-2 2" FPT 10-Mesh - 58.50 MB 6S20-2 2" FPT 20-Mesh - 58.50 MB 6S40-2 2" FPT 40-Mesh - 58.50 MB 6S06-3 3" FPT 6-Mesh - 85.50 MB 6S10-3 3" FPT 10-Mesh - 96.00 MB 6S20-3 3" FPT 20-Mesh - 97.50 MB 6S40-3 3" FPT 40-Mesh - 97.50 MB 6S80-3 3" FPT 80-Mesh - 97.50 MB 6S08-4 4" FPT 6-Mesh - 142.00 MB 6S14-4 4" FPT 14-Mesh - 160.00 * Bolted Style Cleanout.

Body Wt. Part No. Connection Screen Lbs. Net Ea. PD 200718 1" FNPT .024 Perf 4 $ 74.35 PD 200720 1-1/4" FNPT .024 Perf 7 92.95 PD 200722 1-1/2" FNPT .033 Perf 8 105.10 PD 200723 2" FNPT .033 Perf 15 145.50 PD 200726 3" FNPT .033 Perf 41 367.50 PD 200727 4" FNPT .033 Perf 100 741.00 PD 1PD012 0.024” SS Perforated Screen for 1-1/2”.. 23.50 PD 1PD020 0.024” SS Perforated Screen for 2”....... 30.75 Flanged Style Available: .024 Perf equivalent to 40M, .033 equivalent to 20M. Other Screens Available.

— Other Sizes Available - Please Call — DULTMEIER SALES • OMAHA, NE

(800) 228-9666

www.dultmeier.com

• DAVENPORT, IA

(800) 553-6975

E0396


Pump Intake Screens • Strainers

323

Pump Intake Screens Self-Cleaning Design Self-Cleaning Pump Intake Screens protect centrifugal pumps, turbine pumps and water systems from surface water organics, floating solids and debris. Provides a continuous defense against clogging, lost suction and pump wear. Reliable backwash system blows debris off and away from the screen allowing water to flow freely to the pump. Water pressure from the pump continually rotates and backwashes the screen.

Wide Range of Uses: Ponds, Sumps, Lakes, Rivers, Pits, Streams or Canals Features & Benefits: Protects pumps against cavitation as well as reducing damage to impellers • Helps maintain pump efficiencies, reduces head/pressure loss • Continuous cleaning reduces routine system shut-down for line/pump cleaning • Environmental protection keeps fish, mussels, clams, etc. out of pump intakes • Flow from 50 to 2400 GPM. Durable construction features stainless steel end cap, interior pipe, fittings and screen. Polyethylene bushings, reinforced fiberglass frame and ANSI flange outlet are standard. Screens shown are 18 or 30 mesh but 10 mesh is also available. Required backwash pressure ranges from 55 to 100 PSI and required backwash flows from 10 to 50 GPM depending on model.

D

Maximum Flange Part No. Flow Rate Screen Plate DM PC91518S 350 GPM 18 Mesh 6" DM PC91530S 250 GPM 30 Mesh 6” DM PC141518S 560 GPM 18 Mesh 6” DM PC141530S 400 GPM 30 Mesh 6” DM PC92418S 650 GPM 18 Mesh 10” DM PC92430S 400 GPM 30 Mesh 10” DM PC142418S 1000 GPM 18 Mesh 10” DM PC142430S 700 GPM 30 Mesh 10” DM PC192418S 1350 GPM 18 Mesh 10” DM PC192430S 950 GPM 30 Mesh 10” DM PC242418S 1700 GPM 18 Mesh 12” DM PC242430S 1200 GPM 30 Mesh 12”

“Pump Saver” Strainer Discs

End Line Steel Suction Strainers

Aluminum Discs are great for truck and railcar unloading to prevent debris from entering your suction hose and pump unit. Includes approximately 163 holes. 1/4” diameter to minimize pressure loss. Simply thread discs into threaded portion of standard 4” camlock (style “A” or “D”).

Especially suited to handle the high capacity pump on today’s modern equipment. Zinc chromate plated Suction Strainers. 16-Gauge. 1/4" openings. Prevents large particles from entering suction port of pumps

D

Wt. Net Ea. 27 lbs. $ 2015.00 27 lbs. 2015.00 29 lbs. 2222.00 29 lbs. 2222.00 50 lbs. 2349.00 50 lbs. 2349.00 53 lbs. 2556.00 53 lbs. 2556.00 55 lbs. 2722.00 55 lbs. 2722.00 65 lbs. 3056.00 65 lbs. 3056.00

Part No. FPT Port Diameter Net Ea. EV RHS20 1-1/2" 5" $ 10.95 EV RHS25 2" 6" 12.65 EV RHS35 3" 7" 18.60 EV RHS40 4" 7" 20.85

Part No. VV 3A VV 3S VV 4A VV 4S

D

End Line Polyethylene Strainers

Material 3” Aluminum 3” S.S. 4” Aluminum 4” S.S.

Net Ea. $ 53.15 128.80 71.75 151.50

Steel Bottom Hole Skimmers Electro-Plated Steel Skimmers with female NPT threads.

Part No. FPT Port Diameter

PR 0734 1-1/2" PR 0733 2" PR 0757 3"

5-1/4" 5-1/4" 7-7/8"

Net Ea.

$ 5.00 5.00 13.40

DULTMEIER SALES • OMAHA, NE

Bottom Part No. FPT Port Dia. Net Ea.

D

(800) 228-9666

EV BHS150 1" 9.25" $ 21.90 EV BHS200 2" 9.25" 23.05 EV BHS300 3" 11.75" 43.10 •

www.dultmeier.com

• DAVENPORT, IA

(800) 553-6975

E1126


Strainers • Check Valves

324

Carbon Steel Flanged Y-TYPE Strainers

Cast Iron Flanged Y-TYPE Strainers

• Standard with 150/Lb. ANSI Flanges (RF); 300 Lb. Flanged Models Also Available.

• Standard with 125/Lb. ANSI Flanges (FF) • 2” - 24” Sizes.

• 1/2” - 24” Sizes.

• Standard with 1/16” 304 SS Perforated Screens on 1/2” - 4” sizes; 1/8” on 6” - 14” sizes; Many Other Screen Sizes Available.

• Standard with 1/16” 304 SS Perforated Screens on 1/2” - 4” sizes; 1/8” on 6” - 14” sizes; Many Other Screen Sizes Available.

D

• Drain Plug Available. Part No. Description

DZ S2 DZ S3 DZ S4 DZ S6 DZ S8

2” Cast Iron Flanged Y-Strainer 3” Cast Iron Flanged Y-Strainer 4” Cast Iron Flanged Y-Strainer 6” Cast Iron Flanged Y-Strainer 8” Cast Iron Flanged Y-Strainer

• Drain Plug Available.

Standard Screen

Net Ea.

$ 77.30 93.40 149.00 311.60 592.00

1/16” Perf. 1/16” Perf. 1/16” Perf. 1/8” Perf. 1/8” Perf.

Part No. Description

DZ SA7-2 DZ SA7-3 DZ SA7-4 DZ SA7-6 DZ SA7-8

DZ SSA7-2 DZ SSA7-3 DZ SSA7-4 DZ SSA7-6 DZ SSA7-8

2” S.S. Flanged Y-Strainer 3” S.S. Flanged Y-Strainer 4” S.S. Flanged Y-Strainer 6” S.S. Flanged Y-Strainer 8” S.S. Flanged Y-Strainer

Standard Screen

• Designed with straight thru flow design (with angular cut-away design screens) for extremely low pressure loss.

D

• Drain Plug Available. Part No. Description

DZ GFV-2 DZ GFV-3 DZ GFV-4 DZ GFV-6 DZ GFV-8

Cast Bronze Flanged Y-TYPE Strainers

2” Cast Iron Flanged Y-Strainer 3” Cast Iron Flanged Y-Strainer 4” Cast Iron Flanged Y-Strainer 6” Cast Iron Flanged Y-Strainer 8” Cast Iron Flanged Y-Strainer

• Constructed with rugged nickel aluminum bronze castings.

W.O.G. Ports are FPT. 316SS stainless steel valves have teflon seal. Brass valves have BUNA seals.

2” Bronze Flanged Y-Strainer 3” Bronze Flanged Y-Strainer 4” Bronze Flanged Y-Strainer

Standard Screen

1/16” Perf. 1/16” Perf. 1/16” Perf.

Net Ea.

$ 820.00 1500.00 2438.00

Cast Bronze Threaded Y-TYPE Strainers • Standard with 125/Lb. Threaded FNPT Ports. • Threaded Cap & Drain Plug Available.

Part No. Description

DZ F150-12 DZ F150-34 DZ F150-1 DZ F150-2 DZ F150-3

Net Ea.

$ 238.40 311.10 388.90 642.00 1263.00

Low Pressure Check Valves for controlling back flow in liquid lines. Brass or Stainless steel construction. Horizontal mounting only. Rated to 200 PSI

• Drain Plug Available.

D

1/16” Perf. 1/16” Perf. 1/8” Perf. 1/8” Perf. 1/8” Perf.

Low Pressure - Brass & Stainless

D

• Standard with 1/16” 304 SS Perforated Screens on 1/2” - 4” sizes; 1/8” on 5” - 12” sizes; Many Other Screen Sizes Available.

DZ BA-2 DZ BA-3 DZ BA-4

Standard Screen

Inline Swing Check Valves

• Standard with 150/Lb. ANSI Flanges

Part No. Description

• Standard with bolted top cover flange (wingnut style covers also available for even faster cover removal). • Standard with 1/16” 304 SS Perforated Screens on 1/2” - 3” sizes; 1/8” on 4” - 14” sizes.

Net Ea.

$ 590.00 994.00 1813.00 3125.00 5488.00

1/16” Perf. 1/16” Perf. 1/16” Perf. 1/8” Perf. 1/8” Perf.

Net Ea.

$ 307.60 385.90 645.00 1124.00 CALL

Cast Iron Flanged Basket Strainers

• Standard with 150/Lb. ANSI Flanges (RF); 300 Lb. Flanged Models Also Available. • Standard with 1/16” 304 SS Perforated Screens on 1/2” - 4” sizes; 1/8” on 6” - 14” sizes; Many Other Screen Sizes Available. • Drain Plug Available. • Threaded Versions Available.

Part No. Description

Standard Screen

2” Carbon Steel Flanged Y-Strainer 1/16” Perf. 3” Carbon Steel Flanged Y-Strainer 1/16” Perf. 4” Carbon Steel Flanged Y-Strainer 1/16” Perf. 6” Carbon Steel Flanged Y-Strainer 1/8” Perf. 8” Carbon Steel Flanged Y-Strainer 1/8” Perf.

Cast 316 Stainless Flanged Y-TYPE Strainers

D

D

Standard Screen

1/2” Bronze Threaded Y-Strainer 20 Mesh 3/4” Bronze Threaded Y-Strainer 20 Mesh 1” Bronze Threaded Y-Strainer 20 Mesh 2” Bronze Threaded Y-Strainer 20 Mesh 3” Bronze Threaded Y-Strainer 1/16” Perf. DULTMEIER SALES • OMAHA, NE

Net Ea.

Part No. Type FPT Size Net Ea. GN 105103 Brass 1/2” $ 5.40 GN 105104 Brass 3/4” 6.82 GN 105105 Brass 1” 9.04 GN 105106 Brass 1-1/4” 14.65 GN 105107 Brass 1/1/2” 18.15 GN 105108 Brass 2” 28.05 GN 105110 Brass 3” 74.00 GN 105111 Brass 4” 114.10 GN 105803 Stainless 1/2” 27.00 GN 105804 Stainless 3/4” 31.85 GN 105805 Stainless 1” 42.65 GN 105806 Stainless 1-1/4” 56.55 GN 105807 Stainless 1-1/2” 79.70 GN 105808 Stainless 2” 99.95 GN 105810 Stainless 3” 277.80

Brass Type

D

Stainless Type

$ 19.70 23.75 33.85 104.10 401.00

(800) 228-9666

D

www.dultmeier.com

• DAVENPORT, IA

(800) 553-6975

E1000


Strainers / Filters • Separators TwistIIClean® Filter/Strainers

325

Sand/Fine Solids Separators

LAKOS Inline Filter/Strainers. Patented “Twist-to-Clean-Design”. Ideal for industry, agriculture, water well, irrigation, misting systems, etc. Just a 1/4 turn of the handle starts the reverse flushing action which backwashes from inside out. Debris is cleaned off the screen and flushed out the bottom purge port. Polypropylene body/acrylic bowl. EPDM top seal, Viton® bottom seal. Stainless steel screen. MPT or flange ports as noted. Rated to 100 PSI and 120° F. Always check for chemical compatibility.

Features: • No Disassembly Required to Clean • Completely Flushes and Cleans in Just 20 Seconds • No Need to Turn Off Liquid Flow

LAKOS Centrifugal-Action Separators are designed to remove sand, grit and other fine solids from source water systems. Removes up to 98% of 200 mesh, (74 micron) particles and larger. For heavier solids like metal chips, even better results can be expected. Unique design has no moving parts and does not require screens or filters to be cleaned or replaced. Available in Carbon Steel (ILB) and Stainless Steel (ILS) construction. Separators must be periodically purged and manual or automatic purging systems matched to specific applications are also available. Purging can be done during operation with no loss of performance. Flow rates to 290 GPM. Pressures to 150 PSI. Low pressure loss 5-12 PSI. Rated for solids from 50 to 200 mesh. Purge ports is 3/4” MPT on all models.

• No Tools Needed for Cleaning

D

Purge Exit

D

MPT Ports

Model ILB

Flange Ports

D

3/4” 1” 1-1/2” Filters

2” Filters

Purge Port

D

Purge Port

Model ILS

Over 200% Larger Stainless Steel Screen Area lasts for years, collects maximum debris between cleanings. Clear bowl shows when filter needs cleaning.

Part No. DM 131344 DM 131345 DM 131348 DM 131349 DM 131554 DM 131555 DM 131557 DM 131558

Inlet/Outlet Purge Ports Port Mesh Micron 3/4” MPT 1/2” MPT 60 250 3/4” MPT 1/2” MPT 100 150 1” MPT 1/2” MPT 60 250 1” MPT 1/2” MPT 100 150 1-1/2” MPT 3/4” MPT 60 250 1-1/2” MPT 3/4” MPT 100 150 2” Flange 3/4” MPT 60 250 2” Flange 3/4” MPT 100 150

Max. Flow 25 GPM 25 GPM 39 GPM 39 GPM 78 GPM 78 GPM 150 GPM 150 GPM

Length 11-3/4” 11-3/4” 11-3/4” 11-3/4” 15-1/4” 15-1/4” 25” 25”

Net Ea. $ 52.50 52.50 52.50 52.50 70.65 70.65 342.90 342.90

Part No. DM ILB0050 DM ILS0050 DM ILB0075 DM ILS0075 DM ILB0100 DM ILS0100 DM ILB0125 DM ILS0125 DM ILB0150 DM ILS0150 DM ILB0200 DM ILS0200 DM ILB0250 DM ILB0300 DM ILS0300 DM CW07

Ports Construction Flow Rate Wt. Net Ea. 1/2” MPT Carbon Steel 4-10 GPM 14 lbs. $ 423.20 1/2” MPT Stainless 4-10 GPM 14 lbs. 930.00 3/4” MPT Carbon Steel 10-20 GPM 16 lbs. 451.50 3/4” MPT Stainless 10-20 GPM 16 lbs. 970.00 1” MPT Carbon Steel 19-32 GPM 27 lbs. 499.00 1” MPT Stainless 19-32 GPM 27 lbs. 1046.00 1-1/4” MPT Carbon Steel 28-48 GPM 27 lbs. 538.00 1-1/4” MPT Stainless 28-48 GPM 27 lbs. 1187.00 1-1/2” MPT Carbon Steel 45-70 GPM 27 lbs. 615.00 1-1/2” MPT Stainless 45-70 GPM 27 lbs. 1298.00 2” MPT Carbon Steel 65-108 GPM 55 lbs. 779.00 2” MPT Stainless 65-108 GPM 55 lbs. 1970.00 2-1/2” MPT Carbon Steel 95-155 GPM 60 lbs. 921.00 3” MPT Carbon Steel 148-290 GPM 135 lbs. 1459.00 3” MPT Stainless 148-2090GPM 135 lbs. 3975.00 Automatic Drain Valve with Time Controller................... 904.00

Viton® is a registered trademark of DuPont Performance Elastomers

DULTMEIER SALES • OMAHA, NE

(800) 228-9666

www.dultmeier.com

• DAVENPORT, IA

(800) 553-6975

E1056


Pressure Gauges

326

Lower Mount

Dry Design & Liquid Filled

Center Back Mount Gauges

Liquid-Filled with Brass Stems

Pressure Gauges D

D

D

Bottom Mount, Glycerin-Filled Pressure Gauges are the best choice where vibration or pulsation may be present. These gauges feature ABS Case (Ashcroft brand) or Stainless Case (Imported brand). Dial faces are either 2-1/2" or 4". Inlet stem is 1/4" MPT brass on all except WGGSS Series which feature stainless stems. Pressure range from 60 to 10,000 PSI. (Models *2640-15,16 & 20 are combination Vacuum/Pressure Gauges.

D

Back Connection

Back Mount Gauges for those requirements where rear mount plumbing is required. These gauges are available with 1-1/2", 2" or 2-1/2" dial faces and in either Glycerin-filled or Dry design. All gauges feature brass MPT inlet stem. Cases are either painted steel or ABS plastic. DRY GAUGES Center Back Mount (CBM) Part No. Max. PSI Fill Size Case Stem Net Ea. AH J504 15 Dry 1-1/2" Steel 1/8" $ 2.73 AH J505 30 Dry 1-1/2" Steel 1/8" 2.73 AH J507 60 Dry 1-1/2" Steel 1/8" 2.73 AH J508 100 Dry 1-1/2" Steel 1/8" 2.73 AH J518 160 Dry 1-1/2" Steel 1/8" 2.73 AH J509 300 Dry 1-1/2" Steel 1/8" 2.73 AH J511 30 Dry 2" Steel 1/4" 2.96 AH J512 60 Dry 2" Steel 1/4" 2.98 AH J513 100 Dry 2" Steel 1/4" 2.98 AH J516 300 Dry 2" Steel 1/4" 2.98 AH 2DP60 60 Dry 2-1/2" Steel 1/4" 3.70 AH 2DP100 100 Dry 2-1/2" Steel 1/4" 3.70 AH 2DP200 200 Dry 2-1/2" Steel 1/4" 3.70 10% Discount on 20 Assorted Gauges

Part No. Maximum PSI Fill Size Case Brand Net Ea. AH 2640-9 60 Liquid 2-1/2" Stainless Ashcroft $ 12.45 AH 2750-9 60 Liquid 2-1/2" Stainless Import 7.98 AH GG604 60 Liquid 4” Stainless Import 29.90 AH 2640-10 100 Liquid 2-1/2" Stainless Ashcroft 12.45 AH 2750-10 100 Liquid 2-1/2" Stainless Import 7.98 AH GG1004 100 Liquid 4" Stainless Import 29.60 AH 2640-11 200 Liquid 2-1/2" Stainless Ashcroft 12.45 AH 2750-11 200 Liquid 2-1/2" Stainless Import 7.98 AH 2750-8 600 Liquid 2-1/2" Stainless Import 7.98 AH 2640-1 1000 Liquid 2-1/2" Stainless Import 8.06 AH 2640-2 1500 Liquid 2-1/2" Stainless Import 8.03 AH 2640-3 2000 Liquid 2-1/2" Stainless Ashcroft 15.40 AH 2750-3 2000 Liquid 2-1/2" Stainless Import 8.03 AH 2640-4 3000 Liquid 2-1/2" Stainless Ashcroft 15.40 AH 2750-4 3000 Liquid 2-1/2" Stainless Import 8.03 AH 2640-5 5000 Liquid 2-1/2" Stainless Ashcroft 15.40 AH 2750-5 6000 Liquid 2-1/2" Stainless Import 8.03 AH 2640-14 10,000 Liquid 2-1/2" Stainless Import 8.06 AH 2640-15 * 30 HG to 100# Liquid 2-1/2" Stainless Import 8.06 AH 2640-16 * 30 HG to 30# Liquid 2-1/2" Stainless Import 8.05 AH 2640-17 30 HG Only Liquid 2-1/2" Stainless Import 8.06 AH 2640-18 * 30 HG to 30# Liquid 4" Stainless Import 30.90 AH 2640-20 * † 30 HG to 60# Liquid 2.5” Stainless Import 19.90 * Combo Vacuum/Pressure Gauge. † Stainless Stem Also

10% Discount on 20 Assorted Gauges.

LIQUID GAUGES Center Back Mount (CBM) Part No. Max. PSI Fill Size Case Stem Net Ea. AH 2640-60 60 Liquid 2-1/2" Stainless 1/4" $ 7.98 AH 2640-65 100 Liquid 2-1/2" Stainless 1/4" 7.98 AH 2640-70 200 Liquid 2-1/2" Stainless 1/4" 7.98 AH 2640-6 300 Liquid 2-1/2" Stainless 1/4" 7.98 AH 2640-80 600 Liquid 2-1/2" Stainless 1/4" 7.98 AH 2640-85 1000 Liquid 2-1/2" Stainless 1/4" 7.98 AH 2640-90 2000 Liquid 2-1/2" Stainless 1/4" 7.98 AH 2640-95 3000 Liquid 2-1/2" Stainless 1/4" 7.98 AH 2640-50 5000 Liquid 2-1/2" Stainless 1/4" 7.98 AH 2640-25 10,000 Liquid 2-1/2" Stainless 1/4" 8.06 AH 26CL U Clamp for Back Mount Gauges................. 2.53 10% Discount on 20 Assorted Gauges

Stainless Steel Gauges Liquid-Filled WGG Gauges are liquid-filled, lower mount and all stainless steel including case, tube and connection.

D

Digital Pressure Gauges High Quality, Digital Pressure Gauges measures liquids or gas with extremely high accuracy. All gauges feature rugged, weatherproof design that carry IP65 or IP67 ratings for indoor or outdoor environments. Ideal for handling vibrations that adversely affect mechanical gauges. 304L Stainless wetted parts for added liquid compatibility, push button programming and 1/4” MPT bottom mount are also standard features. Model PG2 is base line, digital gauge with auto-off, re-zeroing, user selected units of measure and four digit, backlit LCD display. (1) 3 volt lithium battery will last 2 to 3 years. Accuracy is 0.50% (except 5,000 PSI which is 1.00%), All carry IP65 rating. Model PG7 offers everything you need in a digital gauge. Standard programmable functions are Peak-hold, Tare, Min-max, auto-off, bar graph and units of measure. Four digit, backlit LCD display. (2) AA alkaline batteries have about 2,000 hour life (Lithium batteries will increase battery life). Accuracy is 0.25%. All carry IP67 rating.

10% Discount on 20 Assorted Gauges.

Dry Design

Lower Mount Gauges

D

Dry Pressure Gauges, lower mount, are economically priced and recommended for use where vibrations, pulsations and hydraulic shock are minimal. Cases are ABS plastic. Dial faces are 2", 2-1/2" or 4". Brass inlet stem is 1/4" MPT. Pressure range from 15 to 1000 PSI. Gauges shown are import brand.

304SS

Part No.

Part No. Max.PSI Fill Size Net Ea. AH WGGSS60 60 Liquid 2-1/2" $ 20.00 AH WGGSS100 100 Liquid 2-1/2" 20.00 AH WGGSS200 200 Liquid 2-1/2" 20.00 AH WGGSS400 400 Liquid 2-1/2" 20.00 AH WGGSS1000 1000 Liquid 2-1/2" 20.00 AH WGGSS2000 2000 Liquid 2-1/2” 20.00 AH WGGSS3000 3000 Liquid 2-1/2" 20.05 AH WGGSS5000 5000 Liquid 2-1/2" 20.00 AH WGGSS60-4 60 Liquid 4" 37.10 AH WGGSS100-4 100 Liquid 4" 37.10 AH WGGSS160-4 160 Liquid 4” 37.10 AH WGGSS200-4 200 Liquid 4" 37.10 AH WGGSS400-4 400 Liquid 4" 37.10

PSI

Rating

Net Ea.

AP PG2-0100 100 IP65 $ 124.80 AP PG2-0300 300 IP65 124.80 AP PG2-0500 500 IP65 124.80 AP PG2-1000 1,000 IP65 124.80 AP PG2-5000 5,000 IP65 124.80 AP PG7-0100 100 IP67 281.80 AP PG7-0300 300 IP67 281.80 AP PG7-0500 500 IP67 281.80 AP PG7-1000 1,000 IP67 281.80 AP PG7-5000 5,000 IP67 281.80 AP PG7-10000 10,000 IP67 281.80

D

Part No. Maximum PSI Fill Size Case Net Ea. AH J500 15 Dry 2" ABS $ 2.78 AH J501 30 Dry 2" ABS 2.78 AH J502 60 Dry 2" ABS 2.79 AH J503 100 Dry 2" ABS 2.79 AH J506 300 Dry 2" ABS 2.79 AH 1DP60 60 Dry 2-1/2" ABS 3.46 AH 1DP100 100 Dry 2-1/2" ABS 3.46 AH 1DP160 160 Dry 2-1/2" ABS 3.46 AH 1DP200 200 Dry 2-1/2" ABS 3.48 AH SG400 400 Dry 2-1/2" ABS 3.48 AH SG1000 1000 Dry 2-1/2" ABS 3.48 AH SG60-4 60 Dry 4" Steel Case 7.21 AH SG100-4 100 Dry 4" Steel Case 7.20 10% Discount on 20 Assorted Gauges.

Viton® is a registered trademark of DuPont Performance Elastomers

DULTMEIER SALES • OMAHA, NE

(800) 228-9666

www.dultmeier.com

• DAVENPORT, IA

(800) 553-6975

E0393


Spray Guns • Nozzles Spray Guns

327

Spray Guns A Must For Shrubs, Plants & Tree Care

JD9-C

D

757

JD9-CT

Tapped for Pressure Gauge

Model 757 has a capacity of 13 GPM, up to 600 PSI. It is a one hand gun with a double trigger action that turns on & off, or locks on. Twist spray pattern adjustment from mist to stream. Complete with an assortment of discs to regulate discharge volume. Aluminum construction.

D

D

785 GES-505

D D

Model 785 delivers up to 48 gpm at 800 PSI. Aluminum construction. Adjusts from a fine mist for close-up work to a solid stream for tall or distant targets with a simple twist of the wrist. Guns come with 8 orifice discs and brass barrel.

JD9-C Heavy Duty Spray Gun Features: • Adjustable. Quickly & easily adjusts from a fine mist to a long distance pencil-like stream.

Spray Guns Part No. BN 757 BN 785 BN 785SS

• Rugged Construction. Precision machined out of stainless steel. Rated to 1,000 psi and has 3/4" FGHT inlet. • Comfortable. Crafted for comfortable use all day long. Trigger lock included for continuous spraying. Drip-free shut off.

Description Net Ea. Spray Gun...................................... $ 190.90 Spray Gun, Brass Barrel................. 494.90 Spray Gun, Stainless Barrel........... 591.00

Repair Kits Part No. Description Net Ea. BN 1845 Repair Kit for 757 Gun....................... $ 34.90 BN 5251846 Repair Kit for 785 Gun....................... 33.80

• Versatile. Will handle a wide range of tips & nozzles, Root Feeder attachments & accessory fittings.

GES-505 Economy Model Spray Gun Features: • Aluminum Construction. • 1/2” FPT Inlet. • Rated to 800 PSI. • Accepts the same tips, nozzles, accessories & repair parts as the JD9-C.

Heavy-Duty Spray Guns D

JD9-C & GES-505 Spray Guns: Part No.

Description

JH 38500 JH 38501 JH 38505 JH 38510 JH 38511

JD9-C Spray Gun with 38602 tip............... $ 145.20 JD9-CT Spray Gun tapped for pressure gauge with 38602 tip (gauge not included) 173.80 GES-505 Spray Gun with 38602 tip........... 83.60 Spray Gun Repair Kit................................. 12.65 Spray Gun Repair Kit with Teflon valve seat 25.85

43H-10

Net Ea.

Heavy Duty GUNJET Spray Guns for field or tree spraying. 1/2” inlet.Trigger adjust with lock for wide angle to solid stream. 13” gun is 200 PSI and 7 GPM max. 22” guns are 200-800 PSI and 14 GPM max. For tree spraying use DX nozzles listed below. Part No. Net Ea. SS 43LAAL 13” Aluminum Less Disc. Specify.......... $ 78.55 SS 43H-10 22” Brass GunJet with D10 Disc............ 98.70 SS 43H-AL10 22” Aluminum GunJet with D10 Disc..... 82.00 D6, D8, D10 and D12 Discs Available.

Nozzles & Tips Stainless Nozzle Tips for JD9-C & GES-505 Spray Guns:

DXHSS Hardened Stainless Discs for Tree Spraying

Fine Mist to Pencil-Like Stream Part No. GPM Range Net Ea.

JH 38606 JH 38605 JH 38604 JH 38602 JH 38603

0.3 - 1 GPM 1 - 3 GPM 2 - 5 GPM 3 - 8 GPM 10 - 19 GPM

43LDX8, 43LDX10, 43LDX12 & 43LDX14 Interchangeable SS Spray Tips

$ 16.10 16.10 16.10 16.10 16.10

D

D

DX-HSS Interchangeable Hardened Stainless Steel Spray Tips: Used with 43H GunJet Spray Gun for spraying trees and other applications where maximum height spraying is required. Maximum THROW in FEET (vertical) and GPM capacity on the several TIPS @ 200 PSI is as follows: DX8: 5-GPM & 39', DX10: 7-1/2 GPM & 42', DX12: 10-GPM & 45', DX14: 12-GPM & 48'.

Flooding Nozzles for JD9-C & GES505 Spray Guns: Part No.

JH 38638 JH 38637 JH 38634 JH 38636 JH 38633 JH 38635

GPM

Net Ea.

1/2 GPM 1 GPM 2 GPM 2 GPM* 4 GPM 5 GPM

$ 27.25 27.25 27.25 27.25 27.25 27.25

D

D

Part No. Net Ea.

* Baseball Pattern.

DULTMEIER SALES • OMAHA, NE

(800) 228-9666

DX8HSS

SS DX8HSS

SS DX10HSS

SS DX12HSS

SS DX14HSS

$ 14.30

$ 14.30

$ 14.30

$ 14.30

www.dultmeier.com

• DAVENPORT, IA

(800) 553-6975

E0645


Spray Guns & Accessories

328

Spray Guns

DRIP-FREE GunJet for Spot Spraying

D

Model 18AL

18AL is a lightweight 24" aluminum spray gun with 1/4" FPT connection. D6 orifice. AA2AAL is a 15" heavy duty aluminum spray gun with 3/4" GHT inlet connection. D6 Orifice disc is standard, other sizes available. Operates from 30 to 800 PSI. AA143ALGH6 is a lightweight 22-1/4" aluminum spray gun with 3/4" GHT inlet connection. D6 Orifice disc is standard, other sizes available. Operates from 30 to 800 PSI. Part No. Connection Net Ea. SS 18AL 20" Aluminum Spray Gun 1/4" FPT $ 46.85 SS AA143ALGH6 22" Aluminum Spray Gun 3/4" GHT 52.90 SS AA2AAL 15" Aluminum Spray Gun 3/4" GHT 65.00

No. 30L-22425-36 Drip-Free Gunjet has shut-off located directly behind the orifice tip. Body & trigger molded of tough nylon Maximum recommended pressure is 250 PSI. 1/4" FPT inlet. Gun will accept standard TeeJet tips. Note: Replacement tube and tube assemblies are available. D

Part No. Extension Length SS 30L-22425-8 GunJet......... 8" ....................... SS 30L-22425-18 GunJet......... 18" ....................... SS 30L-22425-24 GunJet......... 24" ....................... SS 30L-22425-36 GunJet......... 36" ....................... SS AB23L-7676 Repair Kit for 23L GunJets.......... SS AB30L Repair Kit for 30L GunJets..........

Net Ea. $ 57.80 61.60 65.25 75.00 12.15 8.07

Trigger Hand Operated Spray Guns Made of molded polypropylene with a polyester extension. Designed for ease and comfort in operation. Trigger lock permits locking of valve in open position for continuous flow of liquid. Maximum pressure is 150 PSI. Viton® diaphragm. 1/4" FPT or 3/8" HB inlet connection. Extensions included on 15" & 24" units. CP22664PP Adapter

Brass & Polypropylene

22670PP w/ Extension

Adjustable Spray Tips

D

22650PP 38720-PPB Tip D

D

5500 Brass

Part No. Description Net Ea. SS 22650-1/4PP Spray Gun Only, 1/4” FPT............................. $ 15.20 SS 22650PP Spray Gun Only, 3/8” HB............................... 15.20 SS 22670PP1/4-15 15” Spray Gun, 1/4” FPT & #8 Nozzle †........ 24.40 SS 22670PP 15” Spray Gun, 3/8” HB & #8 Nozzle †......... 24.15 SS 22670PP-24406 24” Spray Gun, 3/8” HB & #8 Nozzle †......... 28.15 SS PKAB22670PP Repair Kit for Spray Gun............................... 8.79 SS 22665-15PP Extension less Nozzle & Adapter.................. 6.49 SS 22665-24PP Extension less Nozzle & Adapter.................. 10.95 SS CP22664PP Straight Adapter, 11/16” Male x Male............ 1.42 SS CP22673PP 45˚ Adapter................................................... 1.42 3.78 SS 38720-PPBX8 * 45˚ Adjustable ConeJet Assembly............. * Also available in X12 & X18. † Extensions included on these models

5500PPB Poly

Model 5500 Adjustable Spray Tips have TeeJet Cap threads to fit any Gunjet; how­ever, it is primar­ily used with Drip-free guns for spot spraying.Body rotates for spray selection from wide angle cone to straight stream. Maximum throw at 30 PSI is 30 feet. Brass or polypropylene. Tip settings “A” and “B” on chart below represent two extreme points of rotation in tip adjustment.

Capacity-GPM

Performance

Adjustable Conejet Tip Number 5500X1 5500X2 5500X3 5500PPB-X3 5500X4 5500X5 5500PPB-X5 5500X6 5500PPB-X6 5500X8 5500PPB-X8 5500X10 5500X12 5500PPB-X12 5500X14 5500X18 5500PPB-X18 5500X22 5500X26

Liquid Pressure in PSI 20 PSI 30 PSI 40 PSI 60 PSI 100 PSI Setting Setting Setting Setting Setting A B A B A B A B A B - .049 .015 .061 .017 .07 .02 .086 .025 .11 .025 .091 .03 .11 .033 .13 .04 .16 .05 .20

Lightweight Polypropylene Gun for use with back pack and other low pressure sprayers. Available with a 15" polypropylene or 21" aluminum extension. 3/8" Hose barb inlet connection. Trigger lock and internal strainer. 100 psi maximum pressure. Threaded outlet for use with any standard TeeJet tip but comes standard with a 30° adjustable conejet tip.

.037 .13 .045 .17 .05 .19 .058 .23 .073 .30

.061 .21 .076 .26 .082 .30 .10 .37 .13 .48

Part No. SS 50800-38ALX12 SS 50800-38PPX12

.073 .26 .087 .32 .10 .37 .12 .45 .15 .58 .097 .33 .12 .40 .13 .47 .16 .57 .21 .74 .12 .42 .15 .52 .17 .60 .21 .73 .26 .94

Description Net Ea. Spray Gun with 21" Aluminum Extension & #12 Nozzle.................... $ 11.25 Spray Gun with 15" Polypropylene Extension & #12 Nozzle.................... 9.31

SS 38720-PPBX8 * 45˚ Adjustable ConeJet Assembly......... * X12, X18 & X26 Nozzles available.

.15 .49 .18 .60 .20 .69 .24 .84 .31 1.1 .17 .55 .20 .67 .23 .78 .29 .95 .37 1.2

3.78

Brass Trigger Spray Gun

.21 .69 .26 .84 .30 .97 .37 1.2 .47 1.5

250 - PSI Max Up to 2-GPM

D

.26 .83 .32 1.0 .37 1.2 .45 1.4 .58 1.9 .31 .98 .37 1.2 .43 1.4 .53 1.7 .68 2.2

High Flow Adjustable Spray Guns

D

D

.05 .18 .058 .22 .067 .25 .08 .31 .10 .40

Part No. SS 5500X3 thru X26 SS 5500PPB-X3 thru X18

Model 3381-13 Turbo Gun

Lightweight Spray Guns

Description Net Ea. Brass Adjustable Nozzle ........... $ 11.40 Poly Adjustable Nozzle .............. 5.12

Model 6466-4727 Spraying Systems brass GunJet with rubber grip for use with any of the Spraying Systems. Inlet connection is 1/4" MPS. (Straight pipe thread). Use with SS 11990-12 1/4” brass swivel. LESS tip, cap & extension: Requires use of 7715 or 4673 extensions. Part No. Brass Trigger Gun Net Ea.

SS 6466-4727 Less Tip, Cap & Extension $ 32.45 SS 11990-12 1/4” Brass Swivel 9.48

Adjustable Spray Gun Assemblies can easily change from solid stream to wide fan. Excellent choice for high flow, medium pressure spraying and washing applications. Brass nickel construction with 1/2” hose barb inlet and Buna seals. Model 3381-13 is 17” overall length, rated up to 19 GPM and 700 PSI. Standard with #3000 orifice. Model 3381-10 is 24” overall length, rated up to 25 GPM and 1200 PSI. Standard with #3000 orifice. Model 3381-11 is 28” overall length, rated up to 30 GPM and 1200 PSI. Spray Guns Max. Max. Standard with #4000 orifice. Part No. Length Flow PSI Wt. Net Ea. HY 3381-13 17” 19 GPM 700 2 lbs. $ 104.10 D HY 3381-10 24" 25 GPM 1200 4 lbs. 135.40 HY 3381-11 28" 30 GPM 1200 4-1/2 lbs. 180.80 HY 9920-248 1/2” Inlet Swivel ....................................... 17.70 Orifices Flow@700 PSI Net Ea. HY 3385-2300 5.1 GPM $ 16.20 HY 3385-3000 8.6 GPM 16.20 HY 3385-3500 11.6 GPM 16.25 HY 3385-4000 14.1 GPM 16.25 HY 3385-4500 17.0 GPM 16.25 Live Swivel HY 3385-5000 19.5 GPM 16.25 HY 3385-5500 22.0 GPM 16.25 HY 3385-6000 24.2 GPM 16.25 Viton® is a registered trademark of DuPont Performance Elastomers HY 3385-7000 26.0 GPM 16.25 DULTMEIER SALES • OMAHA, NE

(800) 228-9666

www.dultmeier.com

• DAVENPORT, IA

(800) 553-6975

E0391


Spray Guns & Accessories

329

Giant Trigger Guns PW4000 Trigger Guns

Giant Trigger Style Spray Guns are rated to 10 GPM and 5000 PSI these guns will handle a wide variety of cleaning applications.

D

Spraying Systems PW4000 Trigger Gun. Standard Features: Bottom trigger pivot to reduce operator fatigue • Shut-off valve location designed to reduce heat build-up in handle • Packing screw accessible without separating handle halves • Handle is made of high strength polycarbonate construction.

Available with stainless steel or brass discharge ports. Also available with Zero leak or Weep style seats. 3/8" FPT inlet and 1/4" FPT outlet. Maximum Temperature is 300° F.

Specifications: Inlet is 3/8" FPT • Outlet is 1/4" FPT • Maximum operating pressure is 4,000 PSI • Maximum operating temperature is 300° F. • Maximum flow rate is 10 GPM. Part No. SS PW4000A

Max. Flow Max. Pressure 10 GPM 4000 PSI 10% Discount on 5 or more guns

D

21295B

Part No. Inlet Outlet Seat Net Ea. GU 21290B Brass Plated Zero $21.10 GU 21295B Brass Plated Weep 21.10 GU 21250B Brass S.S. Zero 30.25 GU 21255B Brass S.S. Weep 32.25 GU 21227 Repair Kit, 21250B & 21290B..... 5.45 GU 21240 Repair Kit, 21255B & 21295B..... 6.09

Net Ea. $ 33.95

1/4” Stainless Outlet

Hand Spray Gun Extensions

Trigger Guns

for Spraying Systems Guns

Heavy-Duty design to withstand high impact and rough use. Smooth and easy to operate. Trigger lock retracts flush in handle. Stainless steel shut-off needle. Bronze-filled Teflon seat. Note: “W” Style guns have a weep style seat for freeze protection.

Model 4673 D

Model 9527 D

Series 30: Pressures to 1500 PSI, MaximumTemperature 200° F., Maximum Flow 5 GPM, BUNA stem seal. Inlet is 1/4" FPT. Outlet is 1/4" FPT. Series 60: Pressures to 2500 PSI, Maximum Temperature - 300° F., Maximum flow is 6 GPM, Viton® stem seal. Inlet is 3/8" FPT. Outlet is 1/4" FPT. Part No. SS 30-1/4 SS 60-3/8 SS AB30KIT SS AB60KIT

Seat Inlet Outlet PSI Net Ea. Zero Leak 1/4" FPT 1/4" FPT 1500 $ 34.50 Zero Leak 3/8" FPT 1/4" FPT 2500 48.75 Repair Kit for 30-1/4 GunJets......................... 11.05 Repair Kit for 60-3/8 GunJets ........................ 20.65

GunJet Spray Guns

43HD

REPAIR KITS SS-No. FOR RK23 23H RK31 31F RK43 43HD

Part No.

D

MxF

Style

Length

SS 4673-24 Curved 24" SS 4673-36 Curved 36" SS 9527-18 Curved 18" SS 9527-48 Curved 48" SS 7715-8 Straight 8” SS 7715-18 Straight 18”

23H

D

Model 7715

Curved Brasss Hand Gun Extensions are lightweight for pressure up to 1000-PSI. Fits 11/16" outlet connections on GunJet Spray Guns 23H, 31F & 43HD. Brass extension with rubber covered section for hand protection while spraying hot liquids on Model 9527. NOTE: Model 4673 is curved with a swivel body. Max. Pressure

Lawn Spray Guns

CP22664-PP

Straight Adapter

No. 22665 Extension Wand (15” or 24”)

11990

Net Ea.

125 $ 17.05 125 20.00 1000 30.30 1000 43.55 250 9.63 250 12.25

31F 25990

23H GunJet: Light-Duty, less spray tip. For use with interchangeable TeeJet spray tips. Brass inlet body, aluminum alloy handle. Pressures to 1000 PSI. Flow to 5-GPM. 1/4" MPT inlet connection. Stainless steel valve stem. Nickel plated steel trigger. Teflon seat and packing with adjustable external packing nut. 31F GunJet: For pressures to 500 PSI and flow rates to 5-GPM. A comfortable palm fitting gun for use with any TeeJet spray tip. Spray tip not included. Brass forged body. Nickel-plated trigger. Teflon seat and packing. Adjustable external packing nut. Stainless steel valve stem. 1/4" FPT inlet. 43HD GunJet: Heavy-Duty and used with interchangeable spray tips. Handles pressures to 800-PSI on flow rates to 20-GPM. 1/2" FPT Inlet. Stainless steel valve stem. Nylon seat and thermo leather packing with external adjustable packing nut. Brass inlet body. Aluminum alloy handle. Trigger action control valve has trigger lock. Less spray tip and cap. 11990-12 High Pressure Swivel: 1/4" MPT x 1/4" FPT. For pressures to 1200 PSI. For use with 23H GunJet to prevent hose twisting. 11990-19 High Pressure Swivel: 1/2" MPT x 1/2" FPT. For pressures to 800 PSI. For use with 43HD GunJet to prevent hose twisting. Part No. SS 23H SS 31F SS 43HD SS 11990-12 SS 11990-19 SS RK23 SS RK31 SS RK43 Net Ea. $ 38.05 $ 43.05 $ 79.40 $ 9.48 $ 20.00 $ 13.75 $ 7.11 $ 22.65

25657-NYB

Swivel

25660-0

Spray Gun

Adapter

CP22673-PP 45° Adapter

CP25670

Nozzle Tips

D

Model 25660 is constructed of nylon with Viton® O-rings and Stainless Steel springs. Features: Interchangeable nozzle tips that are color coded for easy identification of tip size • “Shower head” spray pattern • Convenient trigger lock for continuous spraying • Maximum operating pressure of 200 PSI. Part No. Tip Color GPM@ 20 PSI Net Ea. SS 25660-0 Spray Gun Only - - $ 50.25 SS 25670-1.5NY Nozzle Tip........ Gray 4.0 8.06 SS 25670-3.0NY Nozzle Tip........ Black 5.6 8.06 SS 25670-4.0NY Nozzle Tip........ Red 6.4 8.06 SS 25990 Hose Shank Swivel, 1/2” Shank............. 7.37 SS 25657NYB Adapter.................................................. 12.70 SS 22665-15PP 15” Extension......................................... 6.49 SS 22665-24PP 24” Extension......................................... 10.95 SS CP22673PP 45° Adapter, 11/16” mm......................... 1.42 SS CP22664PP Straight Adapter, 11/16” mm.................. 1.42

Viton® is a registered trademark of DuPont Performance Elastomers

DULTMEIER SALES • OMAHA, NE

(800) 228-9666

www.dultmeier.com

• DAVENPORT, IA

(800) 553-6975

E0392


Trigger Spray Guns • Nozzle Protectors

330

Wash Down Spray Guns

Part No.

Rating

SS CU1501 SS CU1502 SS CU1503

10 GPM 16 GPM 22 GPM

Nozzle Protectors Designed to protect vehicle surfaces from scratching and damage. Nozzles are completely surrounded by protector guards. Different style designs are shown below.

These popular wash down guns are used in a variety of industries for clean up and disinfecting. Variable spray from solid stream to 50 degree pattern is controlled at the trigger. Rated to temperatures up to 200° F. and pressures to 150 PSI. Body is aluminum and is covered by a replaceable White, Nitrile rubber grip. Trigger is stainless steel. Available in 10, 16 or 22 GPM units. Inlet port is 1/2" female pipe thread.

ST007 Nozzle Protectors feature a Soft outer edge to protect surfaces and a Hard Plastic Base for added wear life. Inlet port is 1/4” FPT Stainless steel. Rated to 5,000 PSI and 300° F. Designed for 1/4” MPT nozzles. Over length is 2”. ST107 Part No. Inlet Nozzle Type Color Net Ea. NP ST107 1/4" FPT 1/4" Black/Red $ 5.03 D

Net Ea.

$ 134.90 134.90 134.90

Rated to Temperatures up to 200° F.

D

Suttner Industrial Spray Guns are an ideal choice for plant or bay washdown. Spray pattern is adjustable. Thick, rubber sheathing protects against heat, cold and impact. Rated to 700 PSI and flows to 27 GPM. Maximum temperatures to 190° F. Inlet port is 1/2" FPT. Weight is 28 oz.

Part No.

Rating

ST004 Nozzle Protectors feature a two piece design where the tough, plastic outer cover threads on to a plastic base. Zinc-plated, 1/4” FPT inlet fitting is housed in the base. Available for either 1/8” or 1/4” MPT nozzles. Rated to 5,000 PSI and 210° F. Overall length is 2-1/2”.

D

ST004

Wash Down Spray Guns Maximum Temperatures to 190° F.

D

Part No. NP ST004-D42 NP ST004-D44

Inlet Nozzle Type Color Net Ea. 1/4" FPT 1/8" MPT Black/Gray $ 3.14 1/4” FPT 1/4” MPT Black/Gray 3.14

1830 Nozzle Protectors features a 1/4” FPT plated inlet. Heavy wall, plastic construction is standard. Rated to 5100 PSI and 320° F. Designed for 1/4” MPT nozzles. Overall length is 2”. Part No. MV 1830

Net Ea.

D

Inlet Nozzle Type Color Net Ea. 1/4" FPT 1/4" MPT Black $ 1.36

D

ST10 ST15

NP ST1200 Wash Down Gun, Brass 27 GPM $ 60.45 NP ST1200SS Wash Down Gun, Stainless * 27 GPM 247.50

1830

ST10 / ST15 Nozzle Protectors feature a brass, 1/4” FPT inlet and hard plastic upper cover. Designed for any 1/4” wand extensions including spring type flex extensions. Overall length is 1-1/4”. Rated to 2000.

* Food Grade.

Part No. GS ST10 GS ST15

Wash Down Spray Gun Adjustable Pattern Wash Down Gun is rated to 195° F. Flows to 16 GPM and pressures to 350 PSI. Discharge cone is adjustable for wide to narrow patterns. Inlet is 1/2" FPT. Weight is 2.1 lbs. Part No.

Rating

Inlet Nozzle Type 1/4" FPT 1/8" MPT 1/4” FPT 1/4” MPT

D

Part No. BC 140 BC 140B BC 140R

Net Ea.

Inlet - - -

Spray Gun / Extensions Units for replacements on box store pressure washers. Extension outlets are 22mm and designed for AL248 spray lances. Gun inlet is either 3/8” FPT or 22mm to match up to 22mm or 3/8” MPT hose assemblies.

D

Part No. Inlet GS 22002 - GS 22005 -

22mm

AL12 Spray wand has 3/8” FPT inlet x 22mm extension outlet. Extension is 19” long. Rated to 8 GPM, 3000 PSI and 140° F.

AL248C Spray lance is designed with 22mm inlet to match wands above. Outlet is 1/4” female quick coupler. Length is 24”. Rated to 10 GPM, 5000 PSI and 300° F. Zinc construction. Part No. AR BT105 AR AL12 AR AL248 AR AL248C

22005

22002

Nozzle Type 1/8” or 1/4” MPT 1/8” or 1/4” MPT

ST005 Nozzle Protectors are made of a heavy duty, flexible rubber. Compact design is only 1” long. Held in place by the nozzle and the wand extension. For 1/8” or 1/4” MPT nozzles. 22mm

Part No. Inlet Nozzle Type Color NP ST005 - 1/8” or 1/4” MPT Black

AL12

3/8” FPT

26110-PUR 22mm

AL248 & AL248C

Nozzle Protector

Net Ea. $ 2.53 2.53

ST005

Net Ea. $ 1.29

Durable and abrasion resistant polyurethane nozzle protectors. Shields the spray surface from damaging contact during use and at shut-off.

1/8MEG or 1/4MEG WashJet Nozzle

Description Inlet Outlet Net Ea. Spray Gun with Extension.... 22mm 22mm $ 14.15 Spray Gun with Extension.... 3/8” FPT 22mm 17.45 24” Lance............................. 22mm 1/4” MPT 7.14 24” Lance............................. 22mm 1/4” QC 13.40

(800) 228-9666

Color Blue Black

D

Nozzle Protector

D

DULTMEIER SALES • OMAHA, NE

Net Ea. $ 1.52 1.52 1.52

2200 Series Nozzle Protectors are made of heavy but flexible plastic and are held in place by the nozzle like the 140 series above. Overall length is 2-1/4”. Available in blue or black. One-piece design.

D

BT105

D

Nozzle Type Color 1/8” or 1/4” MPT Blue 1/8” or 1/4” MPT Black 1/8” or 1/4” MPT Red

Spray Wands with Extensions

AL248 Spray lance is designed with 22mm inlet to match to wands above. Outlet is 1/4” MPT. Length is 24”. Rated to 10 GPM, 5000 PSI and 300° F. Zinc construction.

Net Ea. $ 2.82 2.82

140 Nozzle Protectors are made of a heavy plastic and are held in place by the nozzle and wand. The base acts like a washer to hold both together. Overall Length is 2-1/8”. Available in blue, red or black. One-piece design. Also commonly used on triple foam wands.

IP YG1635N Wash Down Gun 16 GPM $ 78.55

BT105 Spray wand has 22mm inlet x 22mm extension outlet. Extension is 19” long. Rated to 8 GPM, 3000 PSI and 212° F.

Color Black Black

D

CP26110-PUR

Also protects the nozzle & extends wear life. One size fits both 1/8" & 1/4" MEG nozzles up to #20 orifice. Maintains shape and durability from below freezing to 250° F. Part No. Net Ea.

SS CP26110-PUR •

www.dultmeier.com

• DAVENPORT, IA

Nozzle Protector

(800) 553-6975

$ 1.58

E0971


Washdown Nozzles • Mixing Units Wash Down Nozzles

Wash Down Nozzles

— Rear Trigger —

— Front Trigger —

Super Kleen Trigger Guns are designed for plant washdown, truck wash, tank cleanout and industrial cleaning. Rated to 7 gpm @ 50 psi and 12 gpm @ 150 psi. 200° F. maximum. Rear mounted levers reduce hand fatigue and offer smooth lever action. Variable spray pattern is adjustable from fan spray to solid stream. Inlet Port is 1/2” FPT. Rated to 23 GPM and up to 500 PSI. (150 PSI @ 200° F.)

Standard Brass

Drip-free automatic shutoff is a standard feature. Available in Brass, Aluminum or Stainless Steel construction with Blue, White, Red or Gray covers. All covers are easily replaceable if required. Not for use with steam.

D

331

Super Kleen DuraFlow Front Trigger Spray Handle is designed for plant washdown, truck wash, tank cleaning and industrial spraying. Unique design allows for variable spray pattern from a fan to solid stream. Automatic, drip-free shut-off is also a standard feature. Rated for 200° F. and 150 PSI, water only - Not for use with steam. Front trigger can be locked to maintain any nozzle pattern. Stainless steel body with durable cover. Rated to 6.5 GPM at 50 PSI and 11.90 GPM at 150 PSI. Weight is 1.53 lbs.

D

Rear Handle Design

DH150SDB Dark Blue Part No.

Part No.

VD 150ALB VD 150AR VD 150AW VD 150BB VD 150BR VD 150BW VD 150SG

1/2” FPT Inlet Material

Cover

Net Ea.

VD DH150SDB Stainless Dark Blue $ 147.30 VD DH150SR Stainless Red 148.30 VD DH150SW Stainless White 151.40 Body Material Cover Wt.

Aluminum Aluminum Aluminum Brass Brass Brass Stainless

Light Blue Red White Dark Blue Red White Gray

1.7 lbs. 1.7 lbs. 1.7 lbs. 3 lbs. 3 lbs. 3 lbs. 2.8 lbs.

Net Ea.

$ 77.75 80.75 85.80 97.75 100.80 105.80 185.40

Hot & Cold Water / Steam & Cold Water Mixing Units Hot & Cold Water Mixing Units are specifically designed for thoroughly blending hot and cold water instantly. Gate valves for hot and cold water, mounting plate, temperature gauge and stainless hose rack are all included. Available with either brass or stainless steel valves and mixer bodies. All units feature 3/4” NPT inlet connections. Rated to 150 PSI and 200° F. Note: Not for use with steam, see steam unit below. Dimensions are 19-7/8” high x 10-3/4” wide x 9-1/2” deep. Weight is 20 lbs. Steam & Cold Water Mixing Units are specifically designed to provide safe and efficient means of cleanup for plant washdown or tank washout. Operates under a wide variety of steam/water pressures without changing internal components. Rated to 150 PSI saturated steam or working water pressures to 80 PSI. Temperatures to 200° F. Inlet connections are 3/4” FPT. Stainless steel or bronze construction. Dimensions are 18” high x 11” wide x 10-1/2” deep. Weight is 20 lbs. Part No.

Material

VD 3600MBT Brass VD 3600MST Stainless VD 8000GMB Bronze VD 8000GMS Stainless

Unit Style

Net Ea.

Hot & Cold Hot & Cold Steam & Cold Steam & Cold

$ 545.00 1302.00 1036.00 1848.00

DULTMEIER SALES • OMAHA, NE

(800) 228-9666

No Gauge on Steam Models

Model 3600MBT Hot / Cold

Shown with Optional Nozzle and Hose

D

Outlet

D

Model 8000GMS Steam / Cold

www.dultmeier.com

• DAVENPORT, IA

(800) 553-6975

E1093


Trigger Spray Guns • Gauge Accessories

332

Easy Pull Trigger Guns

MV Trigger Guns Great Choice for car wash, truck wash or pressure wash applications. Available in weep or non-weep versions. Contour design and easy trigger pull for ease of use. Exact replacements for many of the popular spray guns on the market today. Brass 3/8” FPT inlet and 1/4” FPT outlet. Rated to 300° F.

Heavy-Duty,Trigger Guns from MTM Hydro. Light trigger pull means less hand fatigue. Ideal for car/truck wash, mobile cleaning, pressure wash and industrial cleaning. Model SG35A can be used for all applications listed above but is also rated for acid solutions. All wands have 3/8” FPT inlet x 1/4” FPT outlet. Rated to 320° F. Zero leak seats.

SG35 & SG35A

D D

D D

Part No.

Seat

MV 925W MV 925 MV 951

Weep Style Zero Leak Zero Leak

Flow

Max. PSI

Net Ea.

7 GPM 8 GPM 10 GPM

4500 4500 5100

$ 17.45 17.15 21.50

Part No.

Max. PSI

Max. Flow

Net Ea.

MV SG28 MV SG35 MV SG35A MV SG40

4000 5000 * 5000 5800

12 GPM 12 GPM 12 GPM 8 GPM

$ 19.75 21.20 26.05 21.70

* Rated for Acid Solutions.

Non Slip Grip

D

SG40

SG28

Pressure Wash Spray Wands Non-Slip Grip

D

951 (10 GPM)

925 & 925W ( 8 GPM)

High Flow Trigger Wands

Non-Slip Grip

High FlowTrigger Wands are ideal for hydro excavation and high gpm flow requirements. Ergonomic design minimizes fatigue.

D

Rear Entry Models are rated to 195° F. Inline Models are rated to 320° F. Large ports as noted. Wand/Lances are 304SS with 1/2” MPT ends. Designed for the pressure washer and truck wash industry. Heavy duty, unique gun features a soft, non-slip rubber grip for ease of use. Zero Leak design. Rated to 12 GPM, 5000 PSI and 320° F. Standard with 3/8” FPT inlet and 1/4” FPT outlet. Brass or Stainless construction. Part No.

Ports

Max. PSI

Max. GPM

Part No.

Max. Flow

Max. PSI

Complete Trigger Wand Assemblies. Ready to hook up to your pressure washer. Assemblies include: Trigger gun, 36” extension with molded grip, 3/8” inlet quick nipple, 1/4” quick coupler outlet. Rated to 7 GPM, 4000 PSI and 250° F. (Nozzles are not included).

Liquid-Filled

Designed to protect pressure gauges from corrosive chemicals. Mount outside the tractor cab to protect control panels which are inside the cab. Available with 1/4" NPT (F) connections. Materials exposed to fluid system are Viton® and Acetal. Gauge side of dampener requires Glycerin or ATF fill. 300 PSI maximum working pressure.

Complete Trigger Wand Assembly............ $ 23.85 Trigger Gun Only....................................... 15.10

Part No.

Net Ea.

SS 22470 Gauge Isolator

Break-Away Gun Fittings

D

Model 22470

$ 49.65

Gauge Accessories Gauge Damper

D

Part No. Net Ea. AA 5068 1/4" MPT x FPT $ 1.93 AA 5069 3/8" MPT x FPT 2.03

D

B301A This "pulsation-check" prolongs gauge life when placed between control valve & pressure gauge. 150 PSI rating. Part No. Net Ea. TW B301A Plated Steel Pulsation Check 1/4" FPT x 1/4" MPT Connection.......................................... $ 10.80

Viton® is a registered trademark of DuPont Performance Elastomers

DULTMEIER SALES • OMAHA, NE

Net Ea.

Gauge Isolator & Protector

Part No. Net Ea.

Mounts between hose and gun or between gun and extension, designed to break before damage to gun or wand. Available in 1/4" or 3/8". Rated to 4,000 PSI.

Ports

IP YG1732 32 GPM 1750 PSI 1/2” FPT $ 116.50 IP YG2953B 53 GPM 2900 PSI 3/4” x 1/2” FPT 264.70 IP YG2527S * 27 GPM 2500 PSI 1/2” FPT 131.20 IP YG4032S * 32 GPM 4000 PSI 1/2” FPT 210.10 IP 680267 1/2” MPT x 36” Long, 304SS Wand/Lance... 43.40 IP 680268 1/2” MPT x 48” Long, 304SS Wand/Lance... 56.55 IP 680269 1/2” MPT x 60” Long, 304SS Wand/Lance... 72.70 IP 680270 1/2” MPT x 72” Long, 304SS Wand/Lance... 86.20 * Straight Inline Design.

Trigger Wand Assemblies

MV 430029 MV M407

Lances

D

Net Ea.

MV 2002 Brass 5000 12 $ 26.05 MV ML956 Stainless 5000 12 119.00

D

D

YG2527S & YG4032S

ML956

2002

YG1732 & YG2953B

(800) 228-9666

www.dultmeier.com

• DAVENPORT, IA

(800) 553-6975

E0586


Trigger Spray Guns Spray Wands for Car & Truck Wash

333

Special Application Spray Wands

Suttner Trigger Wands are designed for the Car and Truck Wash Industries. Forged brass housings for maximum strength. Contour design for operator comfort. Available with Zero Leak or Weep seats. Rebuild kits are available for all models. Inlet ports are all 3/8” FPT. Outlet ports are 1/4” FPT. Rated to 300° F.

Suttner Special Application Wands have a unique construction and design for a wide range of applications. Rated to higher flow rates and pressures than standard Suttner wands. Rated to 300° F.

ST1100 Series. The most lightweight and economical Suttner gun. Rated to 7 GPM at 3000 PSI. Zero leak only. Rear entry design.

ST2750 Series. Tungsten carbide ball and special seal allow this gun to be used up to 7300 PSI. Relax action trigger reduces holding force by up to 90%. 3/8” inlet x 1/4” outlet.

ST1500 Series. The industry standard for over 25 years. Still our most popular gun. Rated to 12 GPM at 5000 PSI. Rear entry design. Available in weep and zero leak. Model ST1500HH is a wand only without trigger. Ideal for use with triple foam wax systems.

ST2000 Series. Our most popular industrial gun. Designed for heavy duty durability. 3/8” inlet x 1/4” outlet.

ST601 Series. Ideal for vertical and overhead cleaning. Inline design is an industry standard for use with telescoping wands and extensions. 3/8” inlet x 1/4” outlet.

ST810 Series. Front entry design keeps hoses away from operator. Rated to 8 GPM at 3000 PSI. Zero leak version includes poly seat for added chemical resistance. Weep style also available but without poly seat.

ST2700/ST2720 Series. Stainless steel valve components for use with corrosive chemicals as well as meeting food industry requirements. Two different flow rates and pressures to choose from. 3/8” inlet x 1/4” outlet.

ST2300 Series. Unique, “easy-pull trigger” requires nearly half the effort of other spray guns. Rated to 12 GPM. Model ST2315 features a ceramic ball which is highly resistant to acids and presoaks. Available in weep and zero leak. Rear entry design.

ST2620/ST3600/ST3300 Series. All of these wands are designed for high flow applications. ST2620 has 3/8” inlet x 1/4” outlet. ST3300 & ST3600 have 1/2” inlet x 1/2” outlet. ST860D and ST4000 Steam Wands. Rated to 290 PSI and 392° F. ST860D is trigger wand only with 1/4” FPT inlet and outlet. ST4000 is trigger wand and extension. Inlet is 3/4” FPT. Overall length is 30”.

ST2600 Series. Exclusive “relax-action” trigger reduces trigger force up to 40% and holding force up to 90%. Great choice for truck wash and mobile cleaning applications. Rated to 12 GPM and 5000 PSI. Zero leak only. Rear entry design.

D

D

D

D

D

D

ST810

ST2620

ST2000

ST1500

ST1100

D D

ST2700

D

D

D

D

ST2720 ST1500HH

ST2300

ST2750

ST2300W

ST3300

ST4000 Steam Wand Assembly

D

D

D

D

ST860D

Trigger Wand Only

D

ST2600

ST2315

ST3600

Part No. Seat GPM PSI Net Ea. NP ST1100 Zero 7 3000 $ 17.00 NP ST1500HH - 5 100 11.25 NP ST1500 Zero 12 5000 18.70 NP ST1500W Weep 12 4000 20.15 NP ST810 ** Zero 8 2000 16.55 NP ST810W Weep 8 3000 16.90 NP ST2300 Zero 12 5000 23.45 NP ST2300W Weep 12 4500 21.90 NP ST2315 ** Zero 12 5000 41.70 NP ST2600 Zero 12 5000 26.95

Part No. Seat GPM PSI Net Ea. NP ST2750 Zero 8 7300 $ 124.30 NP ST2000 Zero 10 5000 22.05 NP ST601 Zero 12 4000 22.15 NP ST2700 ** Zero 12 5000 74.70 NP ST2720 ** Zero 21 1800 111.70 NP ST2620 Zero 21 1800 53.15 NP ST3600 Zero 21 8700 191.90 NP ST3300 ** Zero 27 2150 155.60 NP ST860D Zero - 290 46.80 NP ST4000 Zero - 290 329.80

** Special features for added chemical resistance. DULTMEIER SALES • OMAHA, NE

ST601

** Stainless Steel Components.

(800) 228-9666

www.dultmeier.com

• DAVENPORT, IA

(800) 553-6975

E0876


Spray Gun Accessories

334 1/4” Quick Coupler

Adjustable High Pressure Wand Extension Assemblies

Foam Lances

Extensions / Gun / Hose Assemblies designed for use with pressure washers to effectively clean to 24' while still on the ground. Great for cleaning siding, windows, buildings, etc. Extensions feature trigger spray gun, high pressure hose and adjustable extension, (Nozzles not included). Units are assembled and ready to hook-up to your pressure washer. Rated to 4000 PSI. Available in 3 sizes. Features: Units assembled and ready to hook-up • Trigger spray gun • High pressure hose • 1/4” Quick Coupling fittings inlet & outlet •

Suttner Foam Lances are designed to “foam” cleaning agents or disinfectants onto surfaces to be cleaned or sanitized. Used in conjunction with your existing trigger wand and downstream injector. Air pulls into the orifice in the wand handle to mix with the water/chemical flow to create a foam mixture. Stainless nozzle and extension pipe are standard. Inlet is 1/4" FPT. Match air orifice shown to the flow rate of your pump for optimal foam production. Available in either 25" or 48" lengths. Rated to 300° F. Maximum pressure is 900 PSI. Part No.

Adjustable extension • Rated to 10 GPM • Rated to 4000 PSI • Rated to 195° F.

Existing Pump Flow

Length

Air Nozzle

1.0 - 2.9 gpm 3.0 - 3.9 gpm 4.0 - 5.0 gpm 1.0 - 2.9 gpm 3.0 - 3.9 gpm 4.0 - 5.0 gpm

25" 25" 25" 48" 48" 48"

Green Yellow Red Green Yellow Red

NP ST722 NP ST723 NP ST724 NP ST725 NP ST726 NP ST727

D20015 Support Belt 1/4” Quick Coupler

Net Ea.

$ 114.20 114.20 114.20 128.30 128.30 128.30

Push/Pull Spray Lance

Extension Shown with High Pressure Gun

D

Part No.

Size

DU 612EX DU 618EX DU 624EX IP D20015

6'-12' Adjustable Extension Assembly 9 lbs. $ 87.65 6'-18' Adjustable Extension Assembly 9 lbs. 94.75 9'-24' Adjustable Extension Assembly 14 lbs. 106.90 Support Belt for 612EX / 624EX - 9.04

Wt.

Net Ea.

Insulated Grips

Designed for use with high pressure trigger wands. Unique design allows for use as a straight wand or adjustable angles for hard to reach places like wheel wells or gutters. Pulling the insulated grip backward, changes from straight to as much as a 90° angle. Slide the grip forward and it returns to a straight wand. Construction is zinc-plated steel. Rated to 3000 PSI and Shown in "pull" 300° F. Length is 33". Inlet and outlet position is 1/4" MPT. Part No.

Insulated Grips and Handles from Suttner. Used with existing spray wand barrels to make an insulated wand extension. All grips can be used on any 1/4" wand pipe, extension or barrel. ST009 is a rubber handle grip where the pipe slides through the opening at the top giving you a comfortable handle. ST009C slides over the grip.

Net Ea.

Stainless Steel

6"

Wand Holders

D

17"

ST9 is a 14", 2-piece, molded plastic, vented cover that is assembled over the existing pipe for operator protection. Rated to 300° F. ST9H is a combination of the ST009 and the ST9 that gives you a hand grip and insulated cover.

Length

NP ST85 34" $ 84.00

D

759B

D

22"

711BS

D

D

D

Model ST9

722BS

14" Vented Cover

Model 711BS is a wall mount, rigid style holder for one spray wand. Length is 18”. Includes mounting tabs welded to bottom

Model ST009

Model 722BS is the same as 711BS, but is 22" long for longer extensions. D

Model 759B is a wall mount, rigid style holder for short wands like triple foam wands. Length is 6”. Includes mounting tabs welded to bottom.

D

Model ST9H

Model ST009C

with side handle

Part No.

Description

NP ST009 NP ST009C NP ST9 NP ST9H

Plastic Handle for 1/4" tube extensions.. $ 6.35 Plastic Handle for molded extensions..... 13.30 14", 2-Piece, Vented Grip........................ 6.20 Grip with Side Handle............................. 10.85

Model 711B-SST is a wall mount, flex spring style holder for one spray wand. Length is 26-1/2”. Includes weep nipple at bottom and mounting plate 711B-SST welded to back. Shown with

Net Ea.

Model 711B-SST-FL is a floor mount, flex spring style holder for one spray wand. Length is 26”. Includes mounting plate welded to bottom.

Insulated Wand Grips D

D

259

LENGTH

D

Net Ea.

BC 258 6" $ 3.79 BC 259 11" 4.35 DULTMEIER SALES • OMAHA, NE

D

711B-SST-FL

FLOOR MOUNT Flush Mount Plate

WALL MOUNT

258

Insulated Fore Grips: Molded urethane grips. Constructed to fit 1/4" gun extension wands. Provides insulation when spraying hot liquids. Part No.

Wand & Gun

711B-SST Part No. NP 711BS NP 722BS NP 759B NP 711B-SST NP 711B-SST-FL

Description Net Ea. Wall Mount Rigid, 18” .......... $ 28.80 Wall Mount Rigid, 22”........... 31.30 Wall Mount Rigid, 6”............. 14.65 Wall Mount Spring, 26-1/2”.. 64.60 Floor Mount Spring, 26”....... 67.65

Weep Nipple

(800) 228-9666

www.dultmeier.com

• DAVENPORT, IA

(800) 553-6975

E075

E0741


Spray Gun Accessories Flex Lance Extensions

Stainless Steel Wand Extensions Stainless Steel Wand Barrels are available either insulated or uninsulated. Sizes range from 18" to 84" lengths. All models feature 1/4" MPT inlet and outlet except for #1/4S-18 which has 1/8" FPT outlet and #21762 which has a built-in nozzle protector with 1/4" FPT outlet. Maximum pressures vary from 3000 to 4100 PSI. Maximum temperature to 300° F. Wand Extension with grip

Flexible Spray Gun Extensions: Plated, Galvanized or Stainless Steel extensions with flexible center section. Available in 18" or 24" lengths.Inlet port is 1/4" MPT.Outlet port is 1/4" MPT x 1/8" FPT (for male or female nozzles) except 291P which is 1/8” FPT only. Maximum operating pressure is 2250 PSI. Maximum operating temperature is 200° F.Blue or Black covers.

D

Model 21762 D

Part No. Material Length Cover Net Ea. BC 291P-18 * Plated 18" Blue $ 8.86 BC 291P-18BK * Plated 18" Black 8.86 BC 291G-18 Galvanized 18" Blue 14.25 BC 291G-18BK Galvanized 18" Black 14.15 BC 291G-24 Galvanized 24" Blue 17.80 BC 291G-24BK Galvanized 24" Black 17.80 BC 291S-18 Stainless 18" Blue 17.40 BC 291S-18BK Stainless 18" Black 17.40 BC 291S-24 Stainless 24" Blue 22.60

D

BC 1/4S-18 * 18" Straight No GU 21715 24" Straight No GU 21724A 24" Straight Yes GU 21718 36" Straight No GU 21721A 36" Straight Yes NP ST002-36 36” Straight Yes BC 1/4S-48 48" Straight No GU 21748 48” Straight Yes NP ST002-48 48” Straight Yes NP ST002-48H 48” Straight Yes GU 21719 60" Straight No GU 21759A 60” Straight Yes GU 21725 72" Straight No GU 21728 72” Straight Yes BC 140059 79” Straight Yes GU 21729 84” Straight Yes GU 21726 84" Straight No GU 21762 36" Bent Yes * 1/8" FPT Outlet for 1/8" Male Nozzles.

Wand Handles — Plastic Coated — Model 257 & 357S are wand handles only. 3/8" FPT inlet x 1/4" FPT outlet. For 1/4" extensions. Maximum pressure is 3000 psi. Maximum temperature is 250° F.

Part No. Net Ea. BC 257 $ 11.65 BC 357S 13.40

$ 6.97 7.02 11.80 9.60 14.40 15.35 11.40 16.85 16.65 65.55 14.65 19.15 17.10 21.75 35.30 24.20 19.70 25.55

ST007 Bent Wand with Grip 1/4" MPT

1/4" MPT

1/8" FPT

D

Spray Gun Extensions in Galvanized Steel construction. These uninsulated wands are available in sizes from 18" to 72" long. Rated to 3000 PSI and 250° F. Ports are 1/4" MPT inlet and 1/4" MPT x 1/8" FPT outlet for 1/8" MPT or 1/4" FPT nozzles. Net Ea. $ 3.55 4.20 4.66 6.42 12.10 16.15

Part No. Extension NP ST007-18 Straight Wand with Grip NP ST007-18MF * Straight Wand with Grip NP ST007-24 Straight Wand with Grip NP ST007-36 Straight Wand with Grip NP ST007-48 Straight Wand with Grip NP ST007-60S Straight Wand with Grip NP ST007-60 Bent Wand with Grip NP ST007-79 Bent Wand with Grip NP ST003-18 Straight Wand, No Grip NP ST003-24 Straight Wand, No Grip NP ST003-36 Straight Wand, No Grip NP ST003-48 Straight Wand, No Grip * 1/8" F Discharge for 1/8" Male Nozzles.

Length 18" 18" 24" 36" 47" 60” 60" 79" 18" 24" 36" 48"

Net Ea. $ 5.32 7.23 5.88 6.29 7.91 14.75 20.15 21.10 2.34 2.93 3.91 6.55

Double Barrel Extensions

Galvanized Steel Pipe Extensions with Insulated Grips 1/4" MPT

300° F. 300° F. 300° F. 300° F. 300° F. 300° F. 300° F. 300° F. 300° F. 300° F. 300° F. 300° F. 300° F. 300° F. 300° F. 300° F. 300° F. 300° F.

ST003 Wand Only - No Grip

Galvanized Wand Extensions

Length 18" 24" 27" 36" 48” 60”

3000 4000 4000 4100 4100 5800 4100 4000 5800 7300 4100 4100 4000 4000 4100 4000 4000 4100

Wand Extensions With and Without Insulated Grips. Zinc plated steel tubing. Rated to 6000 PSI. Maximum temperature is 300° F. These lance wands are available in 18", 24", 36" or 48" straight end style or 60" & 79" with 45° curved ends. Inlet and outlet are 1/4" MPT (except for ST007-18MF) and require either female nozzles or nozzle holder/protectors shown in this catalog.

Model 357S is stainless steel.

Part No. BC 1/4G-18 Uninsulated Wand BC 1/4G-24 Uninsulated Wand BC 1/4G-27 Uninsulated Wand BC 1/4G-36 Uninsulated Wand BC 1/4G-48 Uninsulated Wand BC 1/4G-60 Uninsulated Wand

Max. Maximum PSI Temperature Net Ea.

SUTTNER Plated Extensions

Model 357 is galvanized steel. 257 & 357S

Length Grip

Part No.

* Outlet is 1/8” FPT Only - USA.

D

335

1/8" MPT

Double Barrel Wand Extensions designed to be used with chemical injectors for downstream chemical injection. Side handle grip valve allows for easy change-over from high to low pressure which causes injector to pull soap when needed. Nozzle ports are 1/4" FPT. Inlet is 1/4" MPT. Ends are bent or straight as noted. Model ST53 & ST54 are made by Suttner and have zinc plated barrels. ST53 has knob control in place of the handle on ST54. Soap nozzle is included. YDL Models are made by General/Interpump and feature zinc plated or stainless steel barrels with handles like Model ST54. YDL41 has straight barrels. Control Knob

Model ST53

D

For High Pressure Service. With a 1/4" MPT thread on one end and a 1/8" FPT thread on the other end. Wand fits the 1/4" FPT outlet on hand spray guns. Available in 18" through 48" lengths with a molded GRIP, 6" long. The 36" & 48" lengths have a molded GRIP, 11" long. Pressures to 3000 PSI and Temperatures to 250° F. maximum. LENGTH 18" 21" 27" 36" 48" Part No. BC 253-18 BC 253-21 BC 253-27 BC 253-36 BC 253-48 Net Ea. $ 9.51 $ 10.95 $ 12.90 $ 15.15 $ 20.05

Model ST54

Control Handle

Part No.

Construction Length Max. PSI

NP ST53 * Plated, Bent NP ST54 Plated, Bent NP ST54-48 Plated, Bent NP ST53-72 * Plated, Bent NP ST54-72 Plated, Straight IP YDL41 Plated, Straight IP YDL41B Plated, Bent IP YDL41SSB Stainless, Bent IP ZZDBL72 Plated, Bent

38" 38" 48” 72" 72" 41" 41" 41" 72"

Net Ea.

3600 $ 32.30 3600 36.40 4500 63.15 4500 72.95 4500 80.30 3600 52.30 3600 48.30 3600 55.15 3000 72.70

* Has knob control in place of handle on ST54. DULTMEIER SALES • OMAHA, NE

(800) 228-9666

www.dultmeier.com

• DAVENPORT, IA

(800) 553-6975

E0585


Spray & Adjustable Nozzles

336

CLEANING NOZZLES 300 to 4000 PSI

High Quality, High Impact Spray Nozzles for wands, arches, conveyor systems and anywhere high pressure washing or rinsing is needed. Available from 0 degree solid stream to 110 degree flat fan patterns. Stainless steel construction rated between 300 and 4000 PSI. Internal guide vane is available on some nozzle types to provide maximum spray integrity. Available in 1/8” male, 1/4” female and 1/4” quick coupler styles as noted below. (See Nozzle Charts in back of this catalog for flow PSI) NOTE: Available in NPT Thread Only - NO BSP Thread available from Dultmeier Sales

Nozzle Types

D D

Solid Stream Nozzle

D

MEG

1/4” & 1/8” Male

1/4” WEG Female

VeeJet HVVSS Series 300 stainless steel nozzles create a very precise pattern from 300 to 1000 PSI. Solid stream to 110 degree wide patterns are available. 1/8” male and 1/4” males nozzles are available from #1 through #15 orifices. Example: H1/4VVSS2506 is 1/4” male thread, 25 degree pattern, #6 orifice.

Flat High Pressure Even Spray Stabilizer Vane provides high & uniform impact capabilities. Even spray pattern eliminates the need to overlap patterns from adjacent nozzles.

WashJet MEG Series 400 hardened stainless steel nozzles are rated to 3000 PSI. Available with or without stabilizer vanes. Solid stream to 65 degree wide patterns are available. 1/8” MEG (Male) Nozzles are available for #1 through #20 orifices. Male threads only. Example: 1/8MEG0002 is 1/8” MPT (male) thread, zero stream, #2 orifice. (ADD VA at end of number if internal vane is required). 1/4” MEG (Male) or 1/4”WEG (Female) nozzles are available from #2 through #80 orifices. Example: 1/4WEG4004 is 1/4” female thread, 40 degree pattern, #4 orifice. (ADD VA at end of number if internal vane is required). Part No. SS 1/8MEGxxxx SS 1/8MEGxxxxVA SS 1/4MEGxxxx SS 1/4MEGxxxxVA SS 1/4WEGxxxx SS 1/4WEGxxxxVA

Nozzle Type Max. PSI Net Ea. 1/8” Male, No Vane 3000 $ 4.00 1/8” Male, With Vane 3000 4.59 1/4” Male, No Vane 3000 4.20 1/4” Male, With Vane 3000 4.59 1/4” Female, No Vane 3000 8.09 1/4” Female, With Vane 3000 8.56

5% Discount on 20 Nozzles of One Size 10% Discount on 100 Assorted Nozzles

Stabilizer Vane

IMEG Series 400 hardened stainless steel nozzles are rated to 4000 PSI. Unique design offers at least 25% more impact than regular MEG nozzles at comparable pressures. Solid stream to 65 degree wide patterns are available.

D

IMEG

1/4” & 1/8” Male

1/8” IMEG (Male) Nozzles are available from #3 through #8 orifices. 1/4” IMEG (Male) Nozzles are available from #2 through #10 orifices Part No. SS 18IMEGxxxx SS 18IMEGxxxxVA SS 14IMEGxxxx SS 14IMEGxxxxVA

Nozzle Type Max. PSI Net Ea. 1/8” IMEG, No Vane 4000 $ 4.13 1/8” IMEG, With Vane 4000 4.59 1/4” IMEG, No Vane 4000 4.38 1/4” IMEG, With Vane 4000 4.85

VeeJet

Max. PSI 1000 1000 1000

Net Ea. $ 6.17 6.73 7.21

Nozzle Patterns & Sizes 0 Degree, Solid Stream nozzles are available from #2 through #20 orifices in 1/8” MPT male and #2 through #80 orifices in 1/4” MPT (male) or 1/4” FPT (female) styles. Good choice for aggressive pressure washer and industrial cleaning. 5 Degree nozzles are available from #2 through #9 orifices in 1/8” MPT male and #2 through #30 orifices in 1/4” MPT (male) or 1/4” FPT (female) styles. Good choice for aggressive pressure washer and industrial cleaning. 15 Degree nozzles are available from #1 through #15 orifices in 1/8” MPT (male) and #1 through #60 orifices in 1/4” MPT (male) or 1/4” FPT (female) styles. Good choice for pressure washer, industrial cleaning, self serve, automatic and conveyor car washes. 25 Degree nozzles are available from #2 through #15 orifices in 1/8” MPT (male) and #2 through #60 in 1/4” MPT (male) or 1/4” FPT (female) styles. Good choice for pressure washer, self-serve, automatic and conveyor wash and industrial cleaning applications. Most popular self-serve wash pattern. 40 Degree nozzles are available from #2 through #12 orifices in 1/8” MPT (male) and #1 through #60 in 1/4” MPT (male) or 1/4” FPT (female) styles. Good choice for arches, high pressure automatics, conveyor wash and industrial cleaning applications. 50, 65 and 80 Degree nozzles are available in limited sizes, call for details. Good choice for conveyor wash and industrial cleaning applications.

"SPRAYFLEX" Adjustable Nozzle

D

SPRAY-FLEX NOZZLE PERFORMANCE TABLE Water At 70° F. (22 C.) NOZZLE CAPACITY (GPM) AT PUMP PRESSURE (PSI)

UMBER 300 N 400 500 600 700 800 1000 1200 1500 2000 2X40 1.1 1.3 1.4 1.6 1.7 1.8 2.0 2.2 2.45 2.85 2X45 1.2 1.4 1.6 1.7 1.9 2.0 2.3 2.45 2.75 3.2 2X50 1.4 1.6 1.8 1.9 2.1 2.2 2.5 2.75 3.05 3.55 2X55 1.5 1.7 1.9 2.1 2.3 2.5 2.8 3.05 3.40 3.9 2X60 1.6 1.9 2.1 2.3 2.5 2.7 3.0 3.3 3.7 4.25 2X65 1.8 2.1 2.3 2.5 2.7 2.9 3.3 3.55 4.0 4.6 2X70 1.9 2.2 2.5 2.7 2.9 3.1 3.5 3.85 4.3 4.95 2X75 2.1 2.4 2.9 3.1 3.1 3.4 3.7 4.1 4.6 5.3 2X80 2.2 2.5 2.8 3.1 3.4 3.6 4.0 4.4 4.95 5.65 2X85 2.35 2. 7 3.0 3.3 3.6 3.8 4.2 4.65 5.25 6.05 2X90 2.5 2.9 3.2 3.5 3.8 4.0 4.5 4.95 5.55 6.2 2X95 2.6 3.0 3.35 3.7 4.0 4.25 4.75 5.20 5.80 6.7 2X100 2.7 3.2 3.5 3.9 4.2 4.5 5.0 5.5 6.15 7.1

QCMEG Series 400 hardened stainless steel nozzles are rated to 4000 PSI. This series features 1/4” male quick coupler inlet and color coded caps. All QCMEG nozzles also come with internal stabilizer vanes. Solid stream to 40 degree wide patterns are available.

ADJUSTABLE “SPRAYFLEX” NOZZLES are infinitely adjustable from a solid stream to a flat 80° pattern. Adjustment can be made through the whole range while the pump is running. Since flow is through the center of the nozzle, there is no pressure loss. Simple to adjust. Twist cap to widen or narrow angle pattern. Body is brass. Internal nozzle and deflector are Stainless Steel. Cap is molded polyester. Inlet is 1/4" FPT. Maximum pressure is 2000 PSI. Maximum temperature is 180° F.

5% Discount on 20 Nozzles of One Size and QCMEG 10% Discount on 100 1/4” Quick-Connect Assorted Nozzles Part No. Nozzle Type Max. PSI Net Ea. SS QCMEGxxxx 1/4” Quick Coupler 4000 $ 4.20 SS QCEM2540 1/4” Brass Soap Nozzle 300 4.35 Note: Nozzle colors are based on pattern and not orifice numbers. Spray Angles: 0° = Red 15° = Yellow 25° = Green 40° = White

(800) 228-9666

Nozzle Type 1/8” Male 1/4” Male 1/4” Male

HVVSS & HUSS

5% Discount on 20 Nozzles of One Size or 10% Discount on 100 Assorted Nozzles

NOZZLE MODEL

5% Discount on 20 Nozzles of One Size 10% Discount on 100 Assorted Nozzles

DULTMEIER SALES • OMAHA, NE

Part No. SS H1/8VVSSxxxx SS H1/4VVSSxxxx SS H1/4USSxxxx

D

Part No.

HY 2X40 thru 2X100 •

www.dultmeier.com

ALL SIZES (SPECIFY)

• DAVENPORT, IA

(800) 553-6975

Net Ea.

$ 23.70

E0588


Sewer / Jetter Nozzles Laser Sewer Nozzles

Cornering-Pusher Nozzles

Laser-Penetrating Nozzles. Have 3 to 4 rear facing jets for thrust and 1 forward jet for cutting and pushing. Ideal for first pass through a blockage with cutting and flushing action. Stainless construction. Available in 1/8” to 1” FPT. 4,000 to 10,000 PSI.

Cornering-Pusher Nozzles usually features a single jet at 90 degrees to the rear facing jets. This helps to force the nozzle through tight bends and turns. Best when used after or in conjunction with Laser nozzles.

4,000 to 10,000 PSI

D

RN Series D

D

FPT Nozzle Maximum Inlet Equivalent PSI

Net Ea.

AA TC45CC 1/4" 4.5 4,000 AA TC55C 1/4” 5.5 4,000 NP RNH25C8 1/4” 8 10,000 NP RNH25C12 1/4” 12 10,000 NP RNH37C6 3/8” 6 10,000 NP RNH37C8 3/8” 8 10,000 NP RNH37C12 3/8” 12 10,000 NP RNH50C8 1/2” 8 10,000 NP RNH50C10 1/2” 10 10,000 NP RNH50C15 1/2” 15 10,000 NP RNH50C20 1/2” 20 10,000

NP ST47-4 1/8" 4.5 4,000 $ 3.99 NP ST47-5 1/8” 5.5 4,000 4.29 NP ST47-6 1/8” 6.5 4,000 3.99 NP ST47-11 1/8” 11 4,000 3.99 NP ST49-5 1/4” 4.5 5,000 5.30 NP ST49-6 1/4” 5.5 5,000 5.30 NP ST49-8 1/4” 6.5 5,000 5.30 NP ST49-12 1/4” 7.0 5,000 5.30 NP ST49-14 1/4” 8.0 5,000 5.30 NP ST49-15 1/4” 12 5,000 5.30 NP ST497 3/8” 14 4,000 11.85 NP ST494 3/8” 4.5 5,000 6.31 NP ST491 3/8” 5.5 5,000 6.31 NP ST499 3/8” 6.5 5,000 6.31 NP ST492 3/8” 8.0 5,000 6.31 NP ST493 3/8” 12 5,000 6.31 NP RN508 1/2” 8.0 10,000 43.25 NP RN5010 1/2” 10 10,000 43.25 NP RN5015 1/2” 15 10,000 43.25 NP RN5020 1/2” 20 10,000 43.25 NP RN7520 3/4” 20 10,000 74.25 NP RN7530 3/4” 30 10,000 74.25 NP RN7540 3/4” 40 10,000 74.25 NP RN7560 3/4” 60 10,000 74.25 NP RN10040 1” 40 10,000 116.20 NP RN10060 1” 60 10,000 116.20 NP RN10080 1” 80 10,000 116.20

Rotating Sewer Nozzles feature a Ram Design with (3) rear orifices and no front orifice. Off-set jets on a free spinning rotor provides 360° coverage. Available in 1/8” to 1” FPT. Stainless construction. Rated from 3,000 to 10,000 PSI as shown. SJ Series

D

FPT Nozzle Maximum Inlet Equivalent PSI Net Ea.

TR Series

RNH Series

Pipe Diameter 1” to 2” 2” to 3” 2” to 4” 4” to 6” 4” to 8” 4” to 10” 5” to 12”

NP ST25-45 1/8” 4.5 3,000 NP ST25-55 1/8” 5.5 3,000 NP ST25-6 1/8” 6.0 4,000 NP ST25-7 1/8” 7.0 4,000 NP ST25-8 1/8” 8.0 4,000 NP ST37-5 1/8" 5.0 7,000 NP ST37-7 1/8” 7.0 7,000 NP ST50-45 1/4” 4.5 3,000 NP ST50-55 1/4” 5.5 3,000 NP ST50-6 1/4” 6.0 4,000 NP ST50-7 1/4” 7.0 4,000 NP ST50-8 1/4” 8.0 4,000 NP SJ2512 1/4” 12 10,000 NP ST51-85 3/8” 8.5 3,000 NP ST60-5 3/8” 5.0 4,000 NP ST60-6 3/8” 6.0 4,000 NP ST60-8 3/8” 8.0 4,000 NP ST60-10 3/8” 10 4,000 NP ST60-12 3/8” 12 4,000 NP SJ376 3/8” 6.0 10,000 NP SJ378 3/8” 8.0 10,000 NP SJ3712 3/8” 12 10,000 NP SJ508 1/2” 8.0 10,000 NP SJ5010 1/2” 10 10,000 NP SJ5015 1/2” 15 10,000 NP SJ5020 1/2” 20 10,000 NP SJ7520 3/4” 20 10,000 NP SJ7530 3/4” 30 10,000 NP SJ7540 3/4” 40 10,000 NP SJ7560 3/4” 60 10,000 NP SJ10040 1” 40 10,000 NP SJ10060 1” 60 10,000 NP SJ10080 1” 80 10,000

Net Ea.

$ 9.29 9.29 17.95 17.95 17.95 18.35 18.35 9.29 9.20 17.95 17.95 17.25 156.60 9.20 19.95 19.95 23.20 23.20 23.20 156.60 156.60 156.60 249.50 249.50 249.50 249.50 267.70 267.70 267.70 267.70 459.60 459.60 459.60

Drain Cleaning Nozzle

Flow Rates 1 - 2 GPM 2 - 4 GPM 4 - 6 GPM 8 - 20 GPM 20 - 60 GPM 30 - 70 GPM 70 - 120 GPM

DULTMEIER SALES • OMAHA, NE

FPT Orifice Maximum Inlet Equivalent PSI

High Flow Drain Cleaning Nozzle is rated to 16 GPM at up to 3000 PSI. Designed to clean pipes from 1-1/2" to 5" diameter. Ram design has orifices at 45° angles pointing backward which propels the nozzle forward when in operation and cleans as the nozzle is pulled back. 3/8" Male Pipe Thread.

Typical Flow Rates & Pipe Size Hose Size 1/8” I.D. 1/4” I.D. 3/8” I.D. 1/2” I.D. 3/4” I.D. 1” I.D. 1-1/4” I.D.

ST37 & ST50 Series Part No.

Ram Sewer Nozzles feature 3-6 rear facing jets and NO forward jet. Ideal for pushing through blockages and flushing debris at the same time. Best used after Laser Nozzles cut through blockage first. Stainless steel construction. 1/8” to 1” FPT. 4,000 and 10,000 PSI. AA TRS40 1/8” 4.0 4,000 $ 8.33 AA TRS45 1/8” 4.5 4,000 8.33 AA TRS55S1F 1/8” 5.5 4,000 8.25 AA TRS60 1/8” 6.5 4,000 8.33 AA TRS90 1/8” 9.0 4,000 8.33 AA TR45R 1/4" 4.5 4,000 8.25 AA TR55RR 1/4” 5.5 4,000 8.25 AA TR60R 1/4” 6.0 4,000 8.33 AA TR90R 1/4” 9.0 4,000 8.33 AA TR120R 1/4” 12 4,000 8.33 NP RNH258 1/4” 8.0 10,000 33.30 NP RNH2512 1/4” 12 10,000 33.30 NP TRA70 3/8” 7.0 4,000 11.85 NP RNH374 3/8” 4.0 10,000 34.30 NP RNH376 3/8” 6.0 10,000 34.30 NP RNH378 3/8” 8.0 10,000 34.30 NP RNH3712 3/8” 12 10,000 34.30 NP RNH508 1/2” 8.0 10,000 42.40 NP RNH5010 1/2” 10 10,000 42.40 NP RNH5015 1/2” 15 10,000 42.40 NP RNH5020 1/2” 20 10,000 42.40 NP RNH7520 3/4” 20 10,000 78.30 NP RNH7530 3/4” 30 10,000 78.30 NP RNH7540 3/4” 40 10,000 78.30 NP RNH7560 3/4” 60 10,000 78.50 NP RNH10040 1” 40 10,000 126.30 NP RNH10060 1” 60 10,000 126.30 NP RNH10080 1” 80 10,000 126.30

$ 13.40 13.40 23.20 23.20 31.30 31.30 31.30 38.35 38.35 38.35 38.35

Rotating Sewer Nozzles

Ram-Pusher/Flushing Nozzles

Part No.

D

RNHC Series TC Series FPT Nozzle Maximum Part No. Inlet Size PSI Net Ea.

ST Series

Part No.

337

D

Part No.

— High Flow —

Max. Pressure

Max. GPM

IP NT16 3000

(800) 228-9666

www.dultmeier.com

• DAVENPORT, IA

Net Ea.

16 $ 96.00

(800) 553-6975

E0888


Hydro-Excavation Nozzles

338

Hydro-Excavation Nozzles

SwitchBlade™ Hydro-Excavation Zero Stream Nozzles

Easily Cuts Through Soils While Using Less Water

Heavy-Duty, High Impact Nozzles designed for the Hydro-Excavation trenching applications. Completes jobs faster with less down time and dramatically less water consumption. Main body is stainless steel with a non-conductive urethane coating. Tungsten carbide orifices provide longer life than regular stainless steel. Flow orifices can be easily changed out for different soil conditions or wear. Available in Single, Dual or Quad design. Order body style and then specify orifices to meet your flow and pressure requirements. Orifices are priced separately as replacements if needed, but come with bodies (Some popular nozzle combinations are available in complete kits). Singles and dual bodies are 3.4” long x 2” wide. Quad bodies are 3.4” long x 3.4” wide. Rated to 3,200 PSI and 180° F.

Switch Blade™ Ace

D

Switch Blade™ Deuce Switch Blade™ Quad

Nozzle Flow Rate (Each Orifice) (GPM) Part No. Size @2000 PSI @2500 PSI @3000 PSI 1780010 1.0 0.7 GPM 0.8 GPM 0.9 GPM 1780020 2.0 1.4 GPM 1.6 GPM 1.7 GPM 1780030 3.0 2.1 GPM 2.4 GPM 2.6 GPM 1780040 4.0 2.8 GPM 3.2 GPM 3.5 GPM 1780050 5.0 3.5 GPM 4.0 GPM 4.3 GPM 1780060 6.0 4.2 GPM 4.7 GPM 5.2 GPM 1780080 8.0 5.7 GPM 6.3 GPM 6.9 GPM 1780100 10.0 7.1 GPM 7.9 GPM 8.7 GPM 1780120 12.0 8.5 GPM 9.5 GPM 10.4 GPM

Part No. HF 1002036 HF 1002035 HF 1001779 HF 1779-2 HF 1779-3 HF 1779-4 HF 1780010 HF 1780020 HF 1780030 HF 1780040 HF 1780050 HF 1780060 HF 1780080 HF 1780100 HF 1780120

@3200 PSI 0.9 GPM 1.8 GPM 2.7 GPM 3.6 GPM 4.5 GPM 5.4 GPM 7.2 GPM 8.9 GPM 10.7 GPM

Description Switch Blade Ace Single Port Body with Orifice, Specify........ Switch Blade Deuce Double Port Body with Orifices, Specify Switch Blade Quad Four Port Body with Orifices, Specify...... Switch Blade Quad Kit with (4) #2 Orifices.............................. Switch Blade Quad Kit with (4) #3 Orifices.............................. Switch Blade Quad Kit with (4) #5 Orifices.............................. #1 Nozzle Orifice As Replacement, Blue................................ #2 Nozzle Orifice As Replacement, Yellow............................. #3 Nozzle Orifice As Replacement, Green.............................. #4 Nozzle Orifice As Replacement, Orange........................... #5 Nozzle Orifice As Replacement, Purple............................. #6 Nozzle Orifice As Replacement, Red................................. #8 Nozzle Orifice As Replacement, Black............................... #10 Nozzle Orifice As Replacement, White............................ #12 Nozzle Orifice As Replacement, Pink..............................

DULTMEIER SALES • OMAHA, NE

D

RipSaw™ Hydro-Excavation Nozzles Dig Faster . . . Save Water Heavy-Duty, High Impact Nozzles designed for the Hydro-Excavation Industry to complete jobs faster with less run and down time. The RIPSAW™ nozzle blasts a zero degree pattern from 1000 to 3200 PSI while rotating at high speed with an 18 degree cone of coverage. Rated to 180° F.

Net Ea. $ 180.80 200.00 241.40 241.40 241.40 241.40 35.30 35.30 35.30 35.30 35.30 35.30 35.30 35.30 35.30

(800) 228-9666

Features: Wide flow ranges • High impact, zero degree orifices • Stainless steel body with plastic urethane coating • Hardened stainless orifice inserts can be easily changed for flow rate change or due to normal wear • Compact design: 1-3/4” Long x 2-1/4” wide • Flows to 30 GPM and pressures to 4000 PSI • 1/2” FPT inlet port.

Nozzle GPM Flow Part No. Equivalent @3000 PSI Net Ea. IP HX212 5.0 4.30 $ 124.30 IP HX222 6.0 5.20 124.30 IP HX232 7.0 6.00 124.30 IP HX323 8.0 6.90 124.30 IP HX333 9.0 7.80 124.30 IP HX343 10 8.65 124.30 IP HX434 11 9.50 124.30 IP HX444 12 10.4 124.30 IP HX454 13 11.3 124.30 IP HX545 14 12.1 124.80 IP HX555 15 13.0 124.30 IP HX565 16 13.9 124.30 IP HX656 17 14.7 124.30 IP HX666 18 15.6 124.30 IP HX676 19 16.4 124.30 IP HX767 20 17.3 124.30 IP HX777 21 18.2 124.30 IP HX787 22 19.0 124.30 IP HX878 23 19.9 124.30 IP HX888 24 20.8 124.30 IP HX898 25 21.6 124.30 IP HX989 26 22.5 124.30 IP HX999 27 23.4 124.30 IP HX9109 28 24.3 124.30 IP HX10910 29 25.1 124.30 IP HX101010 30 26.0 124.30

D

D

Hydro Excavation Nozzles from General Pump. Designed to easily cut through soils while using less water. Ideal for trenching applications.

Constructed of a stainless steel housing and tungsten carbide wear surface with a non-conductive urethane coating for added protection against electrical hazards. Inlet is 1/2” FPT. Overall size is 1.85” W x 3.77” L. Nozzles can be easily rebuilt if required. Part No. Flow @ 3200 PSI HF 1857-030 2.7 GPM HF 1857-040 3.6 GPM HF 1857-050 4.5 GPM HF 1857-060 5.4 GPM HF 1857-080 7.2 GPM HF 1857-100 9.0 GPM HF 1857-120 10.8 GPM

www.dultmeier.com

• DAVENPORT, IA

D

Net Ea. $ 201.00 201.00 201.00 201.00 201.00 201.00 201.00

(800) 553-6975

E0591


Misting Nozzles

339 ST75 Foamer Nozzles

Misting Nozzles Misting Spray Nozzles are designed to create an ultra-fine, atomizing mist. Typical applications include mist cooling, dust suppression, fogging, humidification, fire protection and many more. Poly/Nylon nozzles with ceramic orifices are designed for long wear life. Built-in check valve prevents dripping when not in use. Threads are 1/4” MPT. Rated to 1000 PSI.

Suttner Foam Nozzles create a thick foam for easy and safe chemical applications. Reduces splash and drift as well as chemical use. Mounts onto standard 1/4” spray wands from your existing pressure washer. Six orifice sizes available to meet you needs. Rated to 4000 PSI and up to 6 GPM. 1/4” FPT inlet. Throw is about 15’. Brass body with plastic cover. Rated to 212° F. (Stainless version also available). Part No. Orifice

NP ST75-3 NP ST75-5 NP ST75-8 NP ST75-10 NP ST75-13 NP ST75-15

D D

D

31943

31945

31944

Typical Applications • Fogging

• Mist Cooling

• Humidification

• Moisture Control

• Fire Protection

• Dust Suppression

• Disinfection

• Deodorizing

• Special Effects

D

Ultra-Fine Atomizing Mist

GPM Nozzle Flow at Various Pressures Free Pass Dia. (mm)

400 PSI 25 BAR

600 PSI 40 BAR

Net Ea.

$ 37.15 37.15 37.15 37.15 37.15 37.15

#3 #5 #8 #10 #13 #15

ST76 Foam Blaster Nozzles

Nozzle Performance Chart Model

Foam Nozzle Foam Nozzle Foam Nozzle Foam Nozzle Foam Nozzle Foam Nozzle

D

800 PSI 55 BAR

Suttner Airless Foam Blaster Nozzles are used with existing pressure washers to throw chemicals and foaming products up to 40’. Ideal for cleaning hard to reach vertical surfaces or can be used with firefighting foaming products for fire suppression. Stainless steel body with plastic cover. Stainless nozzle orifices. Rated up to 16 GPM, 4500 PSI and 212° F. Inlet is 1/2” FPT.

Part No.

1000 PSI 70 BAR

NP ST76-3 NP ST76-4 NP ST76-5 NP ST76-8

31943 .025 .015 .018 .022 .025 31944 .030 .035 .042 .048 .055

Foam Blaster Nozzle Foam Blaster Nozzle Foam Blaster Nozzle Foam Blaster Nozzle

Orifice

#3 #4 #5 #18

Net Ea.

$ 198.50 198.50 198.50 198.50

31945 .050 .050 .060 .070 .080

GPH Nozzle Flow at Various Pressures Model

Nozzle Size

400 PSI 25 BAR

600 PSI 40 BAR

800 PSI 55 BAR

Visit Our Office in Omaha, Nebraska

1000 PSI 70 BAR

31943 .025 .090 1.08 1.32 1.44 31944 .030 2.10 2.52 2.88 3.30 31945 .050 3.0 3.6 4.2 4.8

Part No.

Description

CC 31943 CC 31944 CC 31945

.025 Misting Nozzle .030 Misting Nozzle .080 Misting Nozzle

Color

Net Ea.

Red $ 10.70 Green 10.70 Purple 10.70 13808 Industrial Road • Omaha, NE 68137 1-800-228-9666 • 1-402-333-1444 • FAX: 1-402-333-5546

Misting Nozzles Hypro Misting Nozzles produce 50 micron droplets making them ideal for evaporative cooling and humidification. Can also be used with disinfectants, odor control and dust suppression. Corrosion-resistant construction. Rated to 150 PSI. Standard AF Nozzles are available in a variety of sizes. AFD Nozzles feature anti-drip design but only in a few sizes. Built-in strainers are available on request. 1/8” MPT threads are standard.

Visit Our Office in Davenport, Iowa

D

AF-Hollow Cone 1/8” MPT Nozzles

US gal/hr @ pressure (PSI) Part No. Color Spray Angle 40 60 75 100 150 Net Ea. TW 301AF0.4-65 White 65 0.48 0.59 0.66 0.76 0.93 $ 1.95 TW 301AF0.7-80 Gray 80 0.72 0.88 0.99 1.14 1.39 1.32 TW 301AF0.7-80W White 80 0.72 0.88 0.99 1.14 1.39 1.32 TW 301AF1.2-105C Cream 105 1.20 1.47 1.64 1.90 2.32 1.32 TW 301AF1.6-100 Blue 100 1.68 2.06 2.30 2.66 3.25 1.32 TW 301AF5.0-70 Yellow 70 5.00 6.12 6.85 7.91 9.68 1.32

601 West 76th St. • Davenport, IA 52806 1-800-553-6975 • 1-563-386-0930 • FAX: 1-563-386-5448 e-mail: dultmeier@dultmeier.com • website: dultmeier.com

AFD-Hollow Cone 1/8” MPT Anti-Drip Nozzles US gal/hr @ pressure (PSI) Part No. Color Spray Angle 40 60 75 100 150 Net Ea. TW 301AFD0.7-80 Gray 80 0.72 0.88 0.99 1.14 1.39 $ 2.70 TW 301AFD1.2-105 Cream 105 1.20 1.hh47 1.64 1.90 2.32 2.70 TW 301AFD1.6-100 Blue 100 1.68 2.06 2.30 2.66 3.25 2.70

DULTMEIER SALES • OMAHA, NE

(800) 228-9666

www.dultmeier.com

• DAVENPORT, IA

(800) 553-6975

E1125


Rotating Spray & Turbo Nozzles

340

Turbo Nozzles

Rotomax Rotating Nozzles Rotomax Rotating Nozzles from General Pumps are designed to improve the cleaning efficiency of any pressure washer. Produces a rotating action of a 15 degree pattern while providing the impact of a zero degree nozzle. Inlet is 1/4" FPT. Maximum temperature is 176° F. Overall length is 4.1"

Designed to provide a 200% cleaning efficiency increase over a 25 degree flat fan nozzle. The precision ceramic orifice and matching seat, along with the high strength forged brass housing, provide long-life with no gears, teeth or bearings to wear out. Inlet ports are 1/4" FPT. Maximum temperatures to 190 degrees F. Effective cleaning coverage is comparable to a 25° pattern but with 0˚ impact. Note: See turbo filters on other pages. Part No. Nozzle Inlet Max. PSI Net Ea.

D

D

Color Part No. Coded Nozzle # Maximum PSI Net Ea. IP MAX1 Red 4.0 3500 $ 48.45 IP MAX2 Blue 5.0 3500 48.45 IP MAX3 Black 6.0 3500 48.45 IP MAX581 Red 3.5 5800 117.20 IP MAX583 Black 5.0 5800 117.20 IP 100579 Turbo Filters/Strainers........................... 6.77 IP 190040 Repair Kit for Rotomax Nozzles............ 23.05

General Rotating Nozzles Heavy Duty, Zero Degree Rotating Nozzles from General Pump. Ideal for water blasting, concrete cleaning, graffiti removal, etc. Zero degree impact but in a moving pattern for better coverage. All nozzles are rated to 194° F. Model Y3K nozzles are rated to 3000 psi at up to 8 gpm. Model Y5K nozzles are rated to 5000 psi at up to 10 gpm. Y3K

D

Y5K

D

Part No.

Nozzle #

Max. PSI

Net Ea.

IP Y3K35 3.5 3000 $ 66.95 IP Y3K40 4.0 3000 66.95 IP Y3K45 4.5 3000 66.95 IP Y3K50 5.0 3000 66.95 IP Y3K55 5.5 3000 66.95 IP Y3K65 6.5 3000 66.95 IP Y5K35 3.5 5000 151.00 IP Y5K45 4.5 5000 151.00 IP Y5K55 5.5 5000 151.00 IP Y5K65 6.5 5000 151.00 IP Y5K90 9.0 5000 147.50 IP 100579 Filter/Strainer, 5000 psi 6.77

Rotating Cleaning Nozzles MTM Rotating Nozzles featuring zero degree cleaning impact with a 25 degree pattern of coverage. Rated to 3700 PSI or 4500 PSI as noted. Rebuildable design. Inlet is 1/4” FPT on all models. Brass body, rubber outer cover and ceramic orifice. Rated to 195° F. Part No.

Nozzle #

Max. PSI

NP TA30 3.0 NP TA40 4.0 NP TA50 5.0 NP TA60 6.0 NP TC30 3.0 NP TC40 4.0 NP TC45 4.5 NP TC50 5.0 NP TC55 5.5 NP TC60 6.0 NP TC65 6.5 NP TC70 7.0

D

Net Ea.

3700 $ 37.35 3700 37.35 3700 37.35 3700 37.35 4500 44.40 4500 44.40 4500 44.40 4500 44.40 4500 44.40 4500 44.40 4500 44.40 4500 44.40

Mini Rotojet Nozzles Similar in design to the standard Rotojet Nozzles but in a much more compact, smaller version. Overall length is only 2-1/2”. 25° pattern with zero degree impact. Rated to 3000 psi and 210° F. Inlet is 1/4” FPT. Part No. D

Nozzle #

Max. PSI

Net Ea.

MV 5620 3.0 3000 $ 27.25 MV 5630 3.5 3000 27.25 MV 5640 4.0 3000 27.25 DULTMEIER SALES • OMAHA, NE

(800) 228-9666

NP ST357-3 NP ST357-35 NP ST357-4 NP ST357-45 NP ST357-5 NP ST357-55 NP ST357-6 NP ST357-7 NP ST357-8 NP ST456-3 NP ST456-4 NP ST456-45 NP ST456-5 NP ST456-55 NP ST456-6 NP ST456-8 NP ST457-3 NP ST457-35 NP ST457-4 NP ST457-45 NP ST457-5 NP ST457-55 NP ST457-6 NP ST457-7 NP ST457-8 NP ST457-9 NP ST457-10 NP ST457-12 NP ST457-15

3.0 3.5 4.0 4.5 5.0 5.5 6.0 7.0 8.0 3.0 4.0 4.5 5.0 5.5 6.0 8.0 3.0 3.5 4.0 4.5 5.0 5.5 6.0 7.0 8.0 9.0 10.0 12.0 15.0

1/4” FPT 1/4” FPT 1/4” FPT 1/4” FPT 1/4” FPT 1/4” FPT 1/4” FPT 1/4” FPT 1/4” FPT 1/4” FPT 1/4” FPT 1/4” FPT 1/4” FPT 1/4” FPT 1/4” FPT 1/4” FPT 1/4” FPT 1/4” FPT 1/4” FPT 1/4” FPT 1/4” FPT 1/4” FPT 1/4” FPT 1/4” FPT 1/4” FPT 1/4” FPT 1/4” FPT 1/4” FPT 1/4” FPT

3600 3600 3600 3600 3600 3600 3600 3600 3600 5000 5000 5000 5000 5000 5000 5000 6000 6000 6000 6000 6000 6000 6000 6000 6000 6000 6000 6000 6000

NP ST457-8L 8.0 1/2” FPT 6000 NP ST457-10L 10.0 1/2” FPT 6000 NP ST457-12L 12.0 1/2” FPT 6000 NP ST457-15L 15.0 1/2” FPT 6000 NP ST457-20L 20.0 1/2” FPT 6000 Repair Kits Available - Call Us for Details

$ 43.40 36.90 37.35 43.40 37.35 37.35 37.35 43.40 43.40 56.20 56.20 56.20 56.20 56.20 56.20 56.20 77.30 77.30 66.30 77.30 77.30 77.30 77.30 77.30 77.30 77.30 66.30 134.40 133.90

D D

ST357

ST457

ST456 This is how the Turbo Nozzle works.

69.65 69.65 118.70 118.70 167.70

Turbo/Laser Nozzles Giant Turbo Nozzles give you 0° high pressure impact with a 25 degree angle spray coverage. Standard Features: Heavy duty brass housing with polymer cover • High impact ceramic nozzle and seat for durable, long life • Composite material rotor for high temperatures • 1/4" FPT inlet • 3600 PSI Nozzles are rated to 194° F. and 5800 PSI Nozzles are rated to 195° F. Part No. Inlet Nozzle Max. PSI Net Ea. GU 22047 1/4” 2.0 3600 $ 52.40 GU 22041 1/4” 3.5 3600 52.40 GU 22044 1/4” 4.0 3600 52.40 GU 22040 1/4” 4.5 3600 52.40 GU 22045 1/4” 5.0 3600 52.40 GU 22042 1/4” 5.5 3600 52.40 GU 22046 1/4” 6.0 3600 52.40 GU 22043 1/4” 7.0 3600 52.40 GU 22048 1/4” 8.0 3600 52.40 GU 22049 1/4” 10.0 3600 52.40 GU 22040-12 1/4” 12.0 3600 52.40 GU 22040-15 1/4” 15.0 3600 52.40 GU 22040-20 1/4” 20.0 3600 52.40 GU 22060-20 1/4” 2.0 5800 99.50 GU 22069 1/4” 3.0 5800 99.50 GU 22062 1/4” 4.0 5800 99.50 GU 22060 1/4” 4.5 5800 99.50 GU 22067 1/4” 5.0 5800 99.50 GU 22061 1/4” 5.5 5800 99.50 GU 22066 1/4” 6.0 5800 99.50 GU 22065 1/4” 6.5 5800 99.50 GU 22063 1/4” 7.0 5800 99.50 GU 22068 1/4” 8.0 5800 99.50 GU 22064 1/4” 12.0 5800 99.50 GU 22060-150 1/4” 15.0 5800 99.50 GU 22060-180 1/4” 18.0 5800 99.50 GU 22060-200 1/4” 20.0 5800 99.50 GU 22060A-20-08 1/2” 2.0 5800 105.60 GU 22060A-30-08 1/2” 3.0 5800 105.60 GU 22060A-40-08 1/2” 4.0 5800 105.20 GU 22060A-45-08 1/2” 4.5 5800 105.60 GU 22060A-50-08 1/2” 5.0 5800 105.60 GU 22060A-60-08 1/2” 6.0 5800 105.60 GU 22060A-70-08 1/2” 7.0 5800 105.60 GU 22060A-80-08 1/2” 8.0 5800 105.60 GU 22060A-12-08 1/2” 12.0 5800 105.60 GU 22175 Turbo Filters/Strainers, 5100 psi 10.90

D

22060 Series

D

22040 Series

Note: #22175 Filters will greatly extend nozzle life.

www.dultmeier.com

• DAVENPORT, IA

(800) 553-6975

E0590


Spray Nozzles • Strainers • Filters High Pressure Strainers

Part No.

Oscillating Spray Nozzles

Spraying Systems High Pressure Strainers for Rotating Spray Nozzles help to keep debris from damaging or clogging your nozzles. Rated to 4000 PSI. Body construction is brass with a 100 mesh stainless screen.

D

Description

Inlet

SS 36387F TeeJet Strainer

Outlet

Net Ea.

1/4" FPT 1/4” MPT $ 30.60

Inline High Pressure Filters

PowerJet Oscillating Spray Nozzles from Spraying Systems. Delivers 50% more impact than conventional spray nozzles. Unique design oscillates a solid stream into a 15° flat spray pattern. No moving parts, no vibrating reaction. PowerJet nozzles cost less initially and are less expensive & easier to repair than other “rotary” nozzles. Nozzle body and inlet cap are brass, fluidic internal cartridge is high performance plastic, outer cover is rubber. When wear does occur, simply replace the D internal cartridge.

Inlet

Part No. Orifice # Color Band Net Ea. SS 38950-1404 4.0 Blue $ 82.35 SS 38950-1405 5.0 Green 82.35 SS 38950-1406 6.0 Yellow 82.35 SS 38950-1407 7.0 Red 82.35 SS 38950-1408 8.0 Orange 82.35

D

D

Model 100562 and 100579 are brass construction.

100560

Variable/Hi-Lo Nozzles

100562

Model 100560 is stainless construction. Maximum Part No. Inlet x Outlet Pressure

Net Ea.

IP 100562 IP 100579 IP 100560

$ 9.01 6.77 6.31

1/4" M x M 1/4" F x M 1/4" QC x 1/4"M

3500 3500 5500

All nozzles feature a built-in, 40 mesh, stainless filter to prevent clogging. Nozzles are rated to 3000 psi and 180° F. Inlet connection is 1/4" FPT.

D

Complete Nozzles

High Pressure Filters for protecting rotating or oscillating nozzles from foreign particles. Recommended for extending the life on these nozzles by all nozzle manufacturers. Inlet ports are either 1/4" MPT, 1/4" FPT or 1/4" quick coupler fitting. Rated to 8 gpm and 350° F. All are standard with 100 mesh stainless screens.

Variable Pattern, Hi-Lo Nozzles for use with pressure washers and downstream soap injectors. Infinitely adjustable spray pattern from a solid stream to a wide flat fan. Push-pull design of nozzle also enables it to act as a Hi-Lo nozzle for use with “downstream” soap injection. Inlet port is 1/4" FPT. Rated to 3000 psi and 8 gpm. Maximum temperature is 176° F.

Part No.

Designed to protect Rotating or Oscillating Nozzles from foreign particles. Standard with 100-mesh filter. Inlet is 1/4" FPT, outlet is 1/4" MPT. Length is 2". Maximum temperature is 250° F. Maximum pressure is 5000 psi. Maximum Flow is 12 GPM.

D

Maximum Part No. Inlet x Outlet Pressure Net Ea. GU 22175 1/4" F x 1/4" M 5000 $ 10.90 GU 22174 Replacement Screen.......................... 4.13

Helps to Minimize Pulsation in Piston and Plunger Pumps. Protects Pump & System from Hydraulic Shock.

Standard with 80 Mesh Screen High Pressure Strainer for Turbo Nozzles protect rotating nozzles from damaging foreign debris. Rated to 8 gpm and 5000 psi. Maximum temperature is 200° F. ST909 is 1/4" quick coupler Inlet x 1/4" MPT Outlet.

D

D

ST910 is 1/4" MPT x 1/4" FPT. 22050 & 22155 ST909 D

ST910

1/4" QC x 1/4" MPT 1/4" MPT x 1/4" FPT

5000 5000

Net Ea.

$ 11.25 9.74

Steam Nozzle Nozzles for use with steam cleaners and saturated steam. Rated to 1450 PSI. Inlet is 1/4". Orifice size is 06. Part No.

3375-15

Heavy-Duty Pulsation Dampeners are Pre- charged with dry nitrogen. Assures smooth discharge from high pressure pumps. Reduces vibration and wear on pump parts and accessories. Diaphragms are Buna-N.

Maximum * Maximum Part No. Ports Capacity Pressure PreCharge GU 22050 3/8" MPT 12 GPM 3000 PSI 600 PSI GU 22155 3/8" FPT 30 GPM 3000 PSI 600 PSI GU 22155A 3/4” MPT 30 GPM 3000 PSI 600 PSI GU 22028 Replacement Diaphragm for 22050 Dampener HY 3375-173 1/2" FPT 6 GPM 1500 PSI 300 PSI HY 3375-175 1/2" FPT 6 GPM 1500 PSI 500 PSI HY 3375-15 1" FPT 35 GPM 1500 PSI 300 PSI HY 3375-15-5 1" FPT 35 GPM 1500 PSI 500 PSI HY 3375-156 1" FPT 35 GPM 1500 PSI 600 PSI HY 3375-157 1" FPT 35 GPM 1500 PSI 700 PSI

D

NP ST909 NP ST910

Net Ea.

Pulsation Dampeners

D

Turbo Strainers

Maximum Part No. Inlet x Outlet Pressure

Orifice #

NP ST591-4 4.0 $ 16.55 NP ST591-45 4.5 16.55 NP ST591-5 5.0 16.55 NP ST591-55 5.5 16.55 NP ST591-6 6.0 16.55

Turbo Filter

QC Inlet

341

Net Ea. $ 85.80 161.10 157.10 7.52 136.70 136.70 212.00 212.00 212.00 212.00

* Note: Pre-charge should not exceed 50% of Maximum pressure.

D

Net Ea.

IP YSTN14F Steam Nozzle...... $ 6.46 DULTMEIER SALES • OMAHA, NE

(800) 228-9666

www.dultmeier.com

• DAVENPORT, IA

(800) 553-6975

E0589


342

Spray Nozzles • Ball Nozzle Assemblies Cleaning Nozzles

High Pressure, High Throw Nozzles that are ideal for a wide variety of cleaning and spraying applications. Unique design eliminates the need for ladders, scaffolding or telescoping wands. Designed to project or throw chemicals as high as 40’. Injects and proportions chemicals or liquids without going through your pump, hose or wand. Now you can easily apply caustic cleaners without damaging your equipment. Great for use in removing mold, dirt and mildew from homes and buildings or other tall structures. X-Jet Nozzles are also ideal for tree and orchard spraying. All nozzles are sold in nozzle kits and include X-Jet Nozzle, 1/4” quick coupler, metering tips, 15’ of inlet chemical hose, shutoff valve and inlet strainer. (Replacement nozzles or inserts are also available). Overall length is only 4” long with quick coupler installed. Can be use on virtually any pressure washer from 1,000 to 6,000 psi. Available in Two Different Styles: Original X-Jet Nozzles feature a fixed spray pattern and come with a range of chemical inserts when needed. M5 X-Jet Nozzles feature an adjustable pattern design with a 0-60 degree fan spray. Inserts also included.

Part No. Nozzle Type Flow Range Net Ea. XJ X7 Original, Fixed 2-2.5 GPM @ 2000-3000 PSI $ 116.20 XJ X9 Original, Fixed 3-3.5 GPM @ 2000-3000 PSI 116.20 XJ X13 Original, Fixed 4-6 GPM @ 3000-4000 PSI 116.20 XJ X16 Original, Fixed 6.5-8 GPM @ 3000-3500 PSI 116.20 XJ X20 Original, Fixed 8+ GPM @ 3000-3500 PSI 116.20 XJ M5-7 Adjustable 2-2.5 GPM @ 2000-3000 PSI 130.30 XJ M5-9 Adjustable 3-3.5 GPM @ 2000-3000 PSI 130.30 XJ M5-13 Adjustable 4-6 GPM @ 3000-4000 PSI 130.30 XJ M5-16 Adjustable 6.5-8 GPM @ 3000-3500 PSI 130.30 XJ M5-20 Adjustable 8+ GPM @ 3000-3500 PSI 130.30 XJ XPSA 5 Gallon Sealed Chemical Pail.................................... 27.25 Note: Other Sizes are Available on Request.

Adjustable Ball Nozzle Assemblies Chemically Resistant, Adjustable Ball Nozzle Assemblies for rinse, soap or wax arches, de-icing spray bars or industrial applications. Designed for adjustable direction of nozzles for the most effective coverage. Bodies are available with 1/4", 3/8" or 1/2" MPT threads or with a clip-type clamp for 1" through 2" pipe. Nozzles are available in two styles: Ball/Nozzle combinations (CA & CT numbers) or ball joints only with a threaded ports for use with existing 1/4" or 3/8" MPT nozzles. For complete assemblies, order the body of choice (cap included) and the nozzle type and size required or the ball only if using your own tips. Threaded bodies are rated to 125 psi. Clip-eyelet bodies are rated to 60 psi. Both will handle temperatures to 180° F. Plastic parts are polypropylene for excellent chemical resistance.

#20570 Clamp Assembly

37235

Body

Body with Cap

CP20582

No. 37235

CA

Ball Nozzle

Threaded Type

(CA) Hollow Cone Spray Pattern - Interchangeable Tips Flat

Hollow

CT Fan Nozzle

(CT) Flat Fan Spray Pattern - Interchangeable Tips Part No. Net Ea. SS 37235-1/4PP * 1/4" MPT Body with cap.................... $ 6.82 SS 37235-3/8PP 3/8" MPT Body with cap...................... 6.82 SS 37235-1/2PP 1/2" MPT Body with cap...................... 6.82 SS 20570D-1 Clip Body with cap for 1" pipe.............. 3.65 SS 20570D-1-1/4 Clip Body with cap for 1-1/4" pipe........ 3.65 SS 20570D-1-1/2 Clip Body with cap for 1-1/2" pipe........ 3.64 SS 20570D-2 Clip Body with cap for 2" pipe.............. 5.60 SS CA XXXX † CA Series Hollow Cone Nozzles...... 3.78 SS CT XXXX † CT Series Flat Fan Nozzles.............. 2.78 SS CP20582-1/4PP Ball ONLY, 1/4" FPT, for existing tips.... 2.00 SS CP20582-3/8PP Ball ONLY, 3/8" FPT, for existing tips.... 2.00 * 1/4" body not recommended for capacities over 3 GPM. † Specify Full Number from chart. DULTMEIER SALES • OMAHA, NE

(800) 228-9666

www.dultmeier.com

• DAVENPORT, IA

(800) 553-6975

E0752


Tank Rinse & Cleaning Nozzles Rotary Tank Washing Nozzles

Stainless Rinsing Nozzle

FPT Inlet

D

Capacity Gallons Per Minute Nozzle No.

20 psi

30 psi 40 psi

50 psi 60 psi

23240-7 4.9 6.1 7.0 7.8 8.6

Part No. SS 23240-7

Net Ea. $ 360.10

A new dimension of performance and versatility in low pressure cleaning/rinsing applications. Cleans diameters to 10’. Requires 2-1/4” tank opening. Two-piece nozzle features a spray head that is rotated by the pressurized flow of the spray solution. Can be operated at pres­sures of 10 PSI to 50 PSI. The multiple orifice configuration of the spray head provides exceptional coverage. 360° coverage. 1/2” Rated to 12 GPM @ 50 PSI. 3/4” Rated to 20 GPM @ 50 PSI.

Part No.

D

Net Ea.

SS 55270-1/2-11 1/2" Rotary Nozzle................... $ 48.05 SS 55270-3/4-18 3/4” Rotary Nozzle................... 48.05

Tank Cleaning Nozzles

Ball Type Nylon Rinsing Nozzles

Designed for cleaning of tanks, barrels and drums. Nozzles spin as main body rotates giving complete orbital coverage to interior surfaces. Rotating bodies are driven by electric or pneumatic motors or are self-propelled and driven by the water flow. Stainless steel construction with built-in filters. (2) or (4) nozzles are included but must be matched to your flow and pressure requirements. Rate to 195° F. (Note: Flow and pressure required for correct sizing as well as tank diameter and any chemicals that may be used).

These nozzles are designed to rinse the inside of chemical containers. Nozzles are standard with 40 orifices that have a total spray angle of 240°. Construction is Nylon. Ports are 1/2" FPT or 3/4" FPT. Fixed spray pattern, no rotation. 1/2” Size requires 1-3/16” tank opening, 3/4” size needs 2” Opening.

M21 Nozzle is rated to 5.5 GPM at up to 3200 PSI. Minimum tank opening is 2-1/2”. Electric 110 volt motor is the only drive available for this model. Length is 39”. Weight is 7 lbs. M63 Nozzles are rated from 6 to 10 GPM and 450 to 2000 PSI. Minimum tank opening is 3-1/4”. Self-propelled, 24 volt electric or pneumatic drives are available. Inlet is 3/4” on self-propelled and 3/8” on electric and air models. Length is 481/2”. Weight is 14 lbs. M85 Nozzles are rated from 6 to 21 GPM and 450 to 2000 PSI. Minimum tank opening is 6”. Self-propelled, 24 volt or pneumatic drives are available. Inlet is 3/4” on self-propelled and 3/8” on electric and air models. Length is 51”. Weight is 14 lbs.

Part No. Ports

D

1/2” or 3/4” Inlet

SS VSM-28 SS VSM-44 SS VSM-90 SS VSM-140 SS VSM-190

Flow Rate @ 100 PSI Net Ea.

1/2" FPT 8.7 GPM 1/2" FPT 13.7 GPM 3/4" FPT 28 GPM 3/4" FPT 43 GPM 3/4" FPT 59 GPM

Part No.

DU 1LTC

$ 23.60 23.60 226.10 226.10 226.10 1” MPT Inlet

Tank Cleaner Self operated by the cleaning water. A fast and effective method of cleaning the interior of any sprayer tank. Requires 2-5/8” tank opening. Jets rotating about a horizontal axis. Cover up to a 20' Diameter area. Material is Nylon. Inlet connection is 1" MPT.3.0 GPM at 50 PSI.

M63P M85P

M63E M85E

FPT Inlet

1/2” or 3/4”

For Tank Cleaning Applications, this rinse nozzle has three orifices which create rotational forces to provide spherical coverage. 316 stainless. Internal Teflon sleeve. 1/2" FPT connection. Requires 1-1/32" tank opening. Maximum pressure is 200 PSI.

343

D

Net Ea.

$ 52.05

Jet Rinse Jet Rinse is an easy-to-use way of rinsing chemical containers. The importance of rinsing the chemical container is to permit total usage of the D chemical and also the safety factor involved with chemicals left in the container. Many landfills and salvage yards will not accept empty chemical containers that have not been properly rinsed.

M63 M85

M21

Part No.

Drive

Capacity

IP M21 110V Electric 1.0 - 5.5 GPM IP M63E 24V Electric 6 - 10.5 GPM IP M63P Pneumatic 6 - 10.5 GPM IP M63 Self-Propelled 6 - 10.5 GPM IP M85E 24V Electric 6 - 21 GPM IP M85P Pneumatic 6 - 21 GPM IP M85 Self-Propelled 6 - 21 GPM

Features: Cleans Container of All Chemicals • Can Be Used with Plastic or Metal • Triple Rinse in less than One Minute • Chemicals Saved Pay for Jet Rinse • EasyTo-Use • Small, Convenient, 10" Long • Inlet Connection is 3/4" FGHT.

Net Ea.

How Does It Work? Simply attach a garden hose or a hose from the nurse tank to Jet Rinse and inject the device into the bottom or side of the container, you will completely and thoroughly clean the inside of the container through a jet rinsing procedure. This process will also leave a hole in the container, limiting reuse of the container for other purposes. Jet Rinse can be used on 1-gallon, 2.5 gallon and 5 gallon containers, metal or plastic.

$ 1071.00 1763.00 3383.00 1842.00 2187.00 3391.00 3533.00

Part No.

DU JR24

Jet Rinse

Net Ea.

$ 30.40

DULTMEIER SALES • OMAHA, NE

(800) 228-9666

www.dultmeier.com

• DAVENPORT, IA

(800) 553-6975

E0401


Tank Agitators

344

Chemical Eductors/Injectors

1-1/2" NPT (Female)

PENBERTHY & HYPRO

Tank Mixing Eductors

Polypropylene & Cast Iron

Designed to be used for increased agitation of liquids contained in tanks when settling or local density variations are unacceptable. Typically, eductors can increase the circulation rate from a small pump by a factor of 5 because of the unique design which operates on the Venturi Principle.

TME-34

Dimensions L

TYPICAL INSTALLATIONS FOR DRY CHEMICALS

Size 3/8" 1/2” 3/4" 1-1/2" Pressure (psi)

One gallon motive Nozzle

Diffuser

Four gallons suction

Inlet Port Construction 1/2" MPT Poly 3/8" MPT Poly 3/4" MPT Poly 1-1/2" MPT Poly * 3/4” MPT Poly 1-1/2" FPT Cast Iron 2" FPT Cast Iron 3" FPT Cast Iron

To Tank

20 20 23 30 27 40 30 50

TIME REQUIRED TO EMPTY 55 GAL. DRUM MIN. SEC.

18 27 31 37

2 2 1 1

56 06 45 35

Capacity based on 33" lift from liquid in barrel to eductor

• No moving parts. • Requires only 20 GPM @ 20 PSI of Liquid to Empty a 55 Gallon Drum of Chemicals in Less Than 3 Minutes. (CHE20) • Creates a 15 Inch Vacuum. FNPT FNPT

MNPT

No. EDP Polypropylene

Part No. Size Material Net Ea. DU EDP34 3/4" Poly $ 252.00 DU EDP1 1" Poly 308.00 DU EDP112 1-1/2" Poly 420.00 DU EDI3/4 3/4” Cast Iron 237.00 SC CHE20 1-1/2" Cast Iron 232.90 DU EDI2 2" Cast Iron 705.00 DU EDI3 3" Cast Iron 1267.00

Net Ea. $ 32.50 31.25 35.00 86.00 27.80 164.00 373.00 620.00

Jet Agitators

3371

DA200 Double Agitation Device illustrated can be used in any fiberglass or poly tank. Includes a TF200 poly tank fitting, two single jet agitators with a 7" vertical mounting tee and a T20CM 2" MPT poly tank adaptor which provides a 1-1/4" FPT outlet, 1/2" FPT bypass connection and a 3/4" MPT agitation connection.

Tank Mixing Eductors Operate Simply & Efficiently

Spray Tank Jet Agitator Units S3371 KIT 3371

Draws Out Dangerous Chemicals for Mixing.

• Used to pull chemicals into flow lines quickly.

1-1/2" EDUCTOR CAPACITY USING 1" I.D. HOSE (CHE20) SUPPLY EDUCTOR FROM PUMP CAPACITY GPM PSI GPM

5 gallons circulated

R1212

From Pump

Open Ball Valve As Required - No Chemical Pump Needed

* Hypro Version includes (3) orifice inserts for flow variation.

3371

1-1/2" Full Port Ball Valve

To Tank From Pump

Operating Liquid Flow - GPM (m3/min) D L 9.3 11.9 14.1 16 16.9 1-1/4" 4-1/2" 13.1 17 20.1 22.7 24 2-1/2” 6-1/2” 17.3 22.4 26.5 30 31.6 2-7/8" 6-1/2" 43 55.6 65.8 74.6 78.6 4-1/2" 9-3/4" 15 25 35 45 50 Part No. DU TME-1/2 DU TME-3/8 DU TME-34 DU TME-112 HY 3371-28 DU CTE-112 DU CTE-2 DU CTE-3

FOR LIQUID CHEMICALS

Hose

1-1/2" Full Port Ball Valve

TME SPECIFICATIONS

HIGH CAPACITY HIGH EFFICIENCY FAST, SAFE OPERATION

DRY CHEMICALS

Materials are: • Cast Iron • Polypropylene

D

No. CHE20 Cast Iron

1-1/2" NPT (Male)

These eductors are cast or molded in one piece, with ample thickness, resulting in a strong, durable product. The plastic types offer excellent chemical resistance. UPC type eductor nozzles are designed for high flow rates.

D

1-1/2" NPT (Female)

D

NYLON

D

CONSISTS OF: 1 (AF) T20CM 1 (TK) TF200 2 (HY) 3371 1 (TK) 900-3/4X6 1 (TK) 906-3/4 2 (TW) RB34-12 2 (TW) M1200

Part No. Net Ea.

DU DA200 AF T20CM

TF075 T20CM

D3371 KIT

JET AGITATION ASSEMBLY........... $ 38.00 2" MPT Tank ADAPTER with 1-1/4" FPT x 1/2" FPT & 3/4" MPT... 8.08

D

TF050

MOLDED NYLON CONSTRUCTION

NYLON SPRAY TANK JET AGITATOR UNITS S3371 Single Agitation (For 110 gallon tanks or smaller). D3371 Double Agitation (For 150 to 250 gallon tanks). NOTE: 300 to 500 gallon tanks require TWO D3371 Agitators for proper agitation action.

NO. 3371-19 Hypro Molded Nylon Jet Agitator: Adapts to your installation. Fits directly into 3/4" NPT tank opening. Mounts vertically or horizontally. Four nozzle sizes, 1/8", 5/32", 3/16 & 1/4", are included. Increases effective output flow up to 3 times the input for thorough agitation. Part No. Net Ea.

3371-19

HY 3371-19 Jet Agitator Tank Mounted. Venturi Type

S3371 Single Jet Agitator Consists of: 1- 3371-19 Jet Agitator 1- TF075 Tank Fitting, 3/4” 1- EL3412F Nylon Elbow

NO. 3371 Hypro Jet Agitator is made of tough high impact molded plastic. Required for effective agitation of spray tanks. If properly installed will help keep spray materials from settling out. Low pressure unrestricted discharge reduces foaming. Supplied with three nozzle sizes. 1/2" NPT 1/8", 3/16", 5/32" and spacer ring. Minimum requirement for each jet agitator is 2 GPM -- preferably 3 GPM Nylon "T" Part No. Net Ea. D

D3371 Double Jet Agitator Consists of: 1- TF050 Tank Fitting, 1/2” 1- R1212 Nylon “T” 2- 3371 Jet Agitators

EL3412F

DU S3371 Single Jet Agitator Kit.......... $ 11.10 DU D3371 Double Jet Agitator Kit........ 16.00

Ov

era

ll L

en

gth

HY 3371 TW R1212

Use Hole Saw to drill 1-5/8" Hole in Poly tank & 2-1/8" in Fiberglass. Viton® is a registered trademark of DuPont Performance Elastomers

(800) 228-9666

3/4" NPT

4"

Part No. Net Ea.

DULTMEIER SALES • OMAHA, NE

$ 4.35

www.dultmeier.com

JET AGITATOR with 3-Nozzles....... $ 3.67 NYLON T - 1/2" MPT - for Mounting (2) Agitators..................... 4.51

• DAVENPORT, IA

(800) 553-6975

E0398


Poly Vertical Tanks Vertical Storage Tanks

345 Vertical Storage Tanks TANK FEATURES

To 12,500 Gallons D D

FEATURES: • High quality polyethylene with UV protection • Molded-in deep tie-down lugs • 22” lids available • Molded-in gallonage markers • 3 year warranty • 14 Lbs./Gal. rating (16 Lbs./Gal. available) • Maximum Temperature is 140° F. • 2" Polypropylene bulkhead fitting is standard; 3" and stainless fittings available • Standard color is white (yellow or black is available) • FDA & NSF/ANSI61 approved. Diameter Bulkhead Part No. Gallonage x Height Fitting Lid Wt. Net Ea. RT VT500 500 46” x 77” 2" 8” 118 lbs. $ 420.20 RT VT850 850 54” x 94” 2" 8” 182 lbs. 551.00 RT VT1050 1050 86” x 54” 2" 16” 190 lbs. 647.00 RT VT1350 1350 86” x 65” 2" 16” 228 lbs. 675.00 RT VT1500 1500 86” x 69” 2" 16” 250 lbs. 804.00 RT VT1650 1650 86” x 74” 2" 16” 276 lbs. 865.00 RT VT2000 2000 90” x 84” 2" 16” 375 lbs. 1040.00 RT VT2000-64 2000 64” x 156” 2" 16” 465 lbs. 1280.00 RT VT2050 2050 86” x 93” 2" 16” 402 lbs. 1094.00 RT VT2150 2150 102” x 71” 2" 16” 417 lbs. 1176.00 RT VT2500 2500 90” x 103” 2" 16” 420 lbs. 1339.00 RT VT3000 3000 90” x 120” 2" 16” 550 lbs. 1622.00 RT VT4000 4000 96” x 140” 2" 16” 900 lbs. 2344.00 RT VT4200 4200 96” x 148” 2" 16” 950 lbs. 2475.00 RT VT5000 5000 102” x 156” 3” 16” 1300 lbs. 3344.00 RT VT5150 *** 5150 102” x 161” (2) 3" 16” 1350 lbs. 3859.00 RT VT5150-2S ** 5150 102” x 161” (2) 2” SS 22” 1350 lbs. 4091.00 RT VT6250 6250 102” x 194” 3" 16” 1550 lbs. 3833.00 RT VT6250-2S ** 6250 102” x 194” (2) 2" SS 22” 1550 lbs. 4394.00 RT VT7000 7000 142” x 125” 3" 16” 1750 lbs. 4116.00 RT VT8000 8000 120” x 180” 3” 16” 1930 lbs. 4813.00 RT VT9000 9000 142” x 154” 3” 16” 2100 lbs. 5278.00 RT VT9150 9150 120” x 203” 3" 16” 2200 lbs. 5480.00 RT VT9500 9500 120” x 213” 3” 16” 2352 lbs. 5798.00 RT VT10500 * 10500 142” x 177” 3" 16” 2500 lbs. 6298.00 RT VT10500-28 † 10500 142” x 177” 3” 16” 2800 lbs. 6955.00 RT VT12500 † 12500 142” x 208” 3” 16” 3402 lbs. 8378.00 Note: Other sizes also available. F.O.B. Factory. ** These tanks include (2) 2” stainless fittings, 22” lid & 1-1/2” poly tank mixing eductor. † VT10500-28 is rated to 15 lbs./Gal. * VT10500 is rated to 13 lbs./Gal. *** VT5150 includes (2) 3” poly fittings.

D

Shown in Some Sizes

• Maximum Temperature is 140° F. • Flat spots located on bottom sidewall for additional fitting installation. • Two top-edge molded-in lugs for sure & safe tie down on 150 Gallon & up. • Heavy-duty polyethylene with ultra-violet inhibitors added for protection against sunlight. • Standard Color is Yellow. (FDAapproved tanks for potable water storage are also available in white color). • Gallonage indicator. • Rated to 12 lbs./Gal. Standard. (Other Weights Available). WARRANTY: 5-Year from factory ship date for Flat Bottom, Storage Tanks - non-mobile applications. 3-Year Warranty on mobile tanks.

Fitting Siphon Part No. Capacity Dia. Ht. Fillwell Size Tube Wt. Net Ea. RV 41347 65 Gallon 23" 42" 8" 1-1/4” No 18 lbs. $ 109.30 RV 41856 * 200 Gallon 30” 72” 8” 2” Yes 52 lbs. 233.70 RV 47399 210 Gallon 32" 69" 10" 2” No 59 lbs. 279.20 RV 47401 * 210 Gallon 32” 69” 16” 2” No 59 lbs. 233.90 RV 47484 * 300 Gallon 35" 80" 10" 2" Yes 80 lbs. 324.50 RV 42424 500 Gallon 48" 73" 16" 2" Yes 115 lbs. 370.70 RV 41339 550 Gallon 67" 42" 16" 2" Yes 105 lbs. 379.80 RV 45218 1550 Gallon 87" 65" 10" 2" Yes 283 lbs. 733.00 RV 45081 **3000 Gallon 91” 119” 16” (2) 3” Yes 465 lbs. 1750.00 * White Tank. ** White Tank; (1) 3” Poly fitting with siphon & (1) 3” for recirculation.

Narrow Poly Vertical Tanks 55 to 1500 Gallon These Polyethylene Tanks have been designed with a narrow diameter for tight places and for use in containment dikes. DESIGNED FOR PRODUCTS WEIGHING UP TO 14 LBS./GALLON

Narrow Poly Vertical Tanks

VT0040-18

VT0025-18

10, 20, 25, 40, 65, 75, 100 & 210 Gallon FDA & NSF/ANSI61 Approved (10 through 100 Gallon)

D

VT0100-28

These polyethylene tanks are great for tight spots. 10, 20, 25, 40, 75 and 100 gallon tanks are white and rated to 16 lbs./gal. 65 and 210 gallon tanks are yellow and rated to 12 lb./gal. Part No. Gallons Height Diameter Outlet Fitting Lid Wt. RT VT0010-12 10 25" 12" 3/4” 8” 9 lbs. RT 2026 20 28” 16” 3/4” & 1/2” * 8” 13 lbs. RT VT0025-18 25 30" 18" 3/4” 5” 12 lbs. RT VT0040-18 40 43" 18" 3/4” 5” 17 lbs. RT VT0075-23 75 50” 23” 1” 7” 28 lbs. RT VT0100-28 100 45” 28” 1” 7” 36 lbs. RV 41347 65 43" 23" 1-1/4" FPT 8” 21 lbs. RV 47399 210 69-1/2" 32" 2" FPT 16” 59 lbs. * 1/2” Fitting near top and 3/4” near bottom on 2026 tank. DULTMEIER SALES • OMAHA, NE

Net Ea. $ 51.15 75.50 60.45 75.00 117.20 155.60 109.30 279.20

(800) 228-9666

• Medium & High Density Polyethylene • Ultraviolet Inhibitor • Translucent • Gallonage Markers • Siphon Tube Included on 300 Gallon & Larger Tanks • FDA & NSF/ANSI61 Approved • 3 Year Warranty Part No. RT VT0055-20 RT VT105 RT VT0135-23 RT VT0135-28 RT VT0175-31 RT VT0225-31 RT VT0300-35 RT VT0425-42 RT VT0505-46 RT VT0600-46 RT VT0800-46 RT VT1000-64 RT VT1500-64

D

Gallons Diameter Height Drain Fillwell Wt. Net Ea. 55 20" 47" 1" 5" 22 lbs. $ 94.95 105 23" 65" 1" 8" 38 lbs. 163.70 135 23” 82” 1” 16” 47 lbs. 186.90 135 28" 59" 1" 8" 45 lbs. 171.70 175 31" 61" 1-1/2" 8" 54 lbs. 201.00 200 31” 76” 2” 8” 65 lbs. 267.70 300 35" 81" 2" 8" 86 lbs. 323.20 425 42" 75" 2" 8" 101 lbs. 328.30 505 46" 80" 2" 16" 118 lbs. 427.30 600 46" 91" 2" 16" 130 lbs. 469.70 800 46" 118" 2" 16" 175 lbs. 541.00 1000 64" 81" 2" 16" 250 lbs. 717.00 1500 64” 115” 2” 16” 335 lbs. 1071.00

— Other Sizes Available — All Tank Prices are NET - No Cash Discount Available •

www.dultmeier.com

• DAVENPORT, IA

(800) 553-6975

E0757


Poly Horizontal • Open Top Tanks

346

Horizontal Polyethylene Tanks

Horizontal Polyethylene Tanks Features: Molded in gallonage markers • Center sump for complete drainage • Ribbed design for greater strength • Standard color is yellow. D

D D

– TANK FITTINGS – 110 gallon & larger tanks have two 1-1/4" Double Threaded Fittings (One with Anti-Vortex).

Round Horizontal Polyethylene Tanks (non DOT approved) or chemical storage. All tanks are equipped with drain out sumps.Tanks are manufactured from medium-density polyethylene with UV inhibitors and designed for containment of liquids. 14 lbs./gal. Tank walls are translucent for level viewing and equipped with gallon indicators on one end and one side. Off white color (yellow available). Part No.

RT HZ0075-24 RT HZ0095-24 RT HZ0100-23 RT HZ0110-30 RT HZ0150-32 RT HZ0200-32 RT HZ0300-38 RT HZ0400-42 RT HZ0500-48

Capacity 75 Gallon 95 Gallon 100 Gallon 110 Gallon 150 Gallon 200 Gallon 300 Gallon 400 Gallon 500 Gallon

Dia. Length Lid

24” 24” 23” 30” 32” 32” 38” 42” 48”

47” 56” 64” 44” 57” 66” 76” 76” 79”

5” 5” 5” 8” 8” 8” 8” 8” 8”

Fittings

Wt. Net Ea. 3/4” 33 lbs. $ 120.60 1-1/4” 37 lbs. 163.70 1-1/4” 40 lbs. 160.60 1-1/4” 35 lbs. 166.70 3/4” & 1-1/4” 54 lbs. 205.10 3/4” & 1-1/4” 66 lbs. 244.50 3/4” & 1-1/4” 90 lbs. 310.60 3/4” & 1-1/4” 117 lbs. 401.00 3/4” & 1-1/4” 124 lbs. 422.70

25 and 55 gallon tanks have one 3/4" Double Threaded Fitting.

47340 & 47344 are Slim Line

Part No.

RV 47006 RV 47337 RV 47368 RV 47327 RV 47082 RV 47068 RV 47325 RV 47344 RV 47340 RV 47375 RV 47331 RV 47330

NOTE: See saddles below (required) Capacity

Dia. Length

25-Gallon 23" 19" 55-Gallon 23" 37" 110-Gallon 30" 44" 150-Gallon 30" 56" 150-Gallon 32" 50" 200-Gallon 32" 65" 200-Gallon 38" 47" * 200-Gallon 24" 54" * 250-Gallon 24" 60" 300-Gallon 38" 69" 400-Gallon 42" 76" ** 500-Gallon 48" 74"

Lid

Wt.

5” 5” 10” 10” 10” 10” 10” 10” 10” 10” 10” 10”

11 lbs. 18 lbs. 35 lbs. 54 lbs. 54 lbs. 54 lbs. 54 lbs. 81 lbs. 100 lbs. 81 lbs. 100 lbs. 117 lbs.

* Slim Line Tank, Tractor Side Mount. ** Less Fittings

TANK SADDLES (BLACK) WITH STEEL BANDS (BLACK) Part No. Bands Tank Size Wt. Net Ea. RT HZ0075C 2” x 51.5” 75 Gallon 36 lbs. $ 100.20 RT HZ0095C 2” x 51.5” 95 Gallon 38 lbs. 107.10 RT HZ0100C 1.75” x 39.5” 100 Gallon 40 lbs. 137.40 RT HZ0110C 2.75” x 60” 110 Gallon 40 lbs. 122.80 RT HZ0150C 2.75” x 56” 150 Gallon 56 lbs. 171.10 RT 232C 2.75” x 32” 200 Gallon 110 lbs. 171.10 RT HZ0300C 2.75” x 69.5” 300 Gallon 145 lbs. 285.40 RT HZ0400C 2.75” x 76” 400 Gallon 146 lbs. 306.60 RT HZ0500C 2.75” x 86.5” 500 Gallon 170 lbs. 344.00

Net Ea.

$ 64.15 102.10 168.00 204.30 204.30 245.60 257.60 286.30 345.00 328.30 460.60 440.50

Tank Saddles with Tank Bands for Polyethylene Tanks Above Nylon Bands 25 - 500 Gallon Capacities

D

Shown with Tank

Polyethylene Open Top Tanks

Part No. RV 60321 RV 60303 RV 60315 RT 232C RV 63020 RV 63021 RV 63022 RV 63023

for Containment

Rated to 1.7 S.G. (14 lbs/Gallon) Diameter Wt. Part No. Gallons x Height Lbs. ** RT OP100-RT 100 43”x43”x17” H 26 ** RT OP0200-RT 200 66”x78”x12” H 52 RT OP0210-40 210 40” x 42” 52 ** RT OP0325-RT 325 60”x96”x24” H 115 RT OP0360-48 360 48" x 48" 125 ** RT OP0625-RT 625 72”x108”x24” H 145 RT OP0900-85 900 86" x 43" 175 RT OP1200-85 1200 86" x 56" 200 RT OP1350-85 1350 86" x 62" 217 RT OP1500-85 1500 86" x 68" 240 RT OP1700-90 1700 90" x 66" 317 ** RT OP1825-RT 1825 96”x96”x62” H 520 RT OP2200-90 2200 90" x 85" 365 RT OP2700-90 2700 90" x 103" 480 RT OP3300-102 3300 102” x 105” 550 RT OP3700-96 3700 96" x 128" 625 RT OP6800-120 6800 120" x 146" 1525 Note: Other sizes available.

Diameter Tank Size Wt. Net Ea. 23" 25 Gallon 14 lbs. $ 110.70 23" 55/85 Gallon 24 lbs. 138.20 30"/32" 110/150 Gallon 40 lbs. 205.90 32" 200 Gallon 110 lbs. 249.00 38" 200 Gallon 64 lbs. 248.20 38" 300 Gallon 90 lbs. 439.00 42" 400 Gallon 128 lbs. 453.80 48" 500 Gallon 152 lbs. 439.30

D

Open Top Containment Basin This Open Top Basin is designed for secondary containment for 55 gallon drums or other small tanks in indoor or outdoor installations. Manufactured from polyethylene with U.V. inhibitors. Black only.

CALL FOR PRICING & AVAILABILITY

D

** Tank is rectangular

** Tanks Ending in “-RT” are only for “Secondary” Containment, Not for Primary Liquid Storage. Other Models Available Including Some with Bolt-On Tops, Call for Availability

DULTMEIER SALES • OMAHA, NE

(800) 228-9666

Specific Part No. Capacity Dimensions Gravity Wt. Net Ea. RT OP0055-2DC (2) 55 Gal. Drums 34” x 62” x 26” 1.7 70 lbs. $ 147.00

www.dultmeier.com

• DAVENPORT, IA

(800) 553-6975

E0996


Storage Tanks

347 Steel Storage Tanks

Cone Bottom 304 Stainless Tanks

FEATURES: 1/4" bottom, 3/16" shell & top • (3) 4" FNPT threaded nozzles (add for flanged outlets) • 4" PVC Vent • 4" Siphon Tube, designed for fill and outload • 24" Bolted Manway • (4) Lift Eyes and Anchor Lugs • Acrylic Enamel.

All seams double welded (inside & outside). 5° Roof and 10° cone slope.Tanks include (2) 2" FPT top fittings, 2" elbow bottom fitting, (2) 2" FPT side recirculation fittings, two lift hooks, 16" hinged roof manway. Tanks have 10" bottom clearance.

Flat Bottom Gallons

D

316SS Tanks also available in #2B finish (non-polished) or #4 finish (polished sides and top).

Diameter

Height

10,000 12' 10' 12,600 12' 15' Call 16,800 12' 20' for 17,000 11' 24' Delivered 21,000 12' 25' Price 25,000 12' 30' *29,600 12' 35'

D

* With 1st Lower Band of 1/4"

Fiberglass Storage Tanks FEATURES: (2) 3" FPT Couplings (One Siphon) may be threaded or flanged • 24" Bolted Manway • (4) Carbon Steel Combination Lift Eyes/Anchor Lugs • 3/4" Sight Tube, Stainless Fittings, Stainless “Deadman” Valve, S.S. Wind Guards • Exterior Pigmented (Colored) Tan or White. Gallons

Overall Part No. Gallons Diameter Height FI 608SS 1729 6' 9' 9" FI 610SS 2152 6' 11' 9" FI 612SS 2575 6' 13' 9" Call FI 614SS 2998 6' 15' 9" For FI 808SS 3096 8' 10' 1" Delivered FI 810SS 3848 8' 12' 1" Price FI 812SS 4600 8' 14' 1" FI 814SS 5350 8' 16' 1" FI 816SS 6100 8’ 18’ 1”

Height

Rectangular, Polyethylene Tanks for chemical storage. One-piece, molded construction means no seams to leak. Description Net Ea. Excellent chemical resistance. Single Eductor Recirculation Set....................... $ 97.50 Fitting Package - Tank to Pump. 6' Tanks........... 765.00 Translucent for visible contents Fitting Package - Tank to Pump. 8' Tanks........... 802.00 level. Tanks come with lids. Rated to 140° F.

H2O Water Only Tanks Part No.

2500 & 3000 Tanks

D

Height (H)

D

Len

gth

(L)

)

th (W

Wid

Capacity

Net Ea.

5 Gallon 11 Gallon 22 Gallon 37 Gallon

$ 61.00 100.00 136.40 143.50

Fuel Tanks Also Available Single & Double Wall Tanks Vents, Valves, Tank Pumps & More!

Part No. Gallons Dimensions Outlet Fitting Lid Wt. Net Ea. RT WO2500-VT 2500 96” x 92” 2” 16” 392 lbs. $ 1025.00 RT WO3000-VT 3000 96” x 109” 2” 16” 487 lbs. 1221.00

(800) 228-9666

Size

CU R6X1212A 6"W x 6"L x 12"H CU R1212 12"W x 12"L x 18"H CU R1224 12"W x 24"L x 18"H CU R1824 18"W x 24"L x 18"H

These Water Only Vertical Tanks are freestanding for indoor or outdoor stationary applications. They are designed for the storage of water or other light liquids compatible with polyethylene and with a specific gravity of 1.0 or less (8.34 lbs./ gal. or less). They are manufactured from FDA compliant high-density polyethylene with U.V. stabilizers. The tanks minimize algae formation due to their dark green color.

DULTMEIER SALES • OMAHA, NE

D

Open Top Storage Tanks

The packages listed below contain all necessary materials to complete assembly between tank & pump. Tank valves are full flow stainless, other valves are polypropylene. Standard hose is wire-reinforced EPDM. 2" Pressure/Vacuum vent included. Fittings are black malleable and XH Schedule 80 nipples. Pump & motor unit not included: see separate pages for pumps. Pump/Meter Units available - Please Call. Part No. DU 1C018 DU 1C015 DU 1C017

Diameter

8,400 12' 10' 10,150 12' 12' Call 12,600 12' 15' for 16,800 12' 20' Delivered 21,000 12' 25' Price 25,350 12' 30' 29,600 12' 35' Other Sizes Available on Request.

www.dultmeier.com

See Our Petroleum Equipment Section • DAVENPORT, IA

(800) 553-6975

E0402


Poly Cone-Bottom & PCO Tanks

348

Pest Control Operator (PCO) Tanks

Cone-Bottom Storage Tanks

These rectangular tanks are commonly referred to as “Pest Control Operator” tanks since they include many desirable features for the pest control operator and other users.

FEATURES: D

Part No.

• High quality polyethylene with UV protection. • Molded-in deep tie-down lugs. • 12" or 16" Vented Lids • Molded-in gallonage markers. • 3 year warranty. • 14 Lbs./Gal. rating (16 Lbs./Gal. available) • Cone bottom for total drain-out. • 2” Poly Bulkhead Fittings. • Santoprene Gaskets • Heavy-duty cone-bottom steel stands.

Gallonage Diameter & Cone x Height Lid

Net Ea.

RT CB0150-36 150 Gallon-45˚ 36” x 63” 12" $ 237.90 RT CB036-45ST Cone Bottom Stand 208.60 RT CB0200-42 200 Gallon-45˚ 42” x 67” 12" 291.90 RT CB042-45ST Cone Bottom Stand 236.40 RT CBFD240-42 * 240 Gallon-45° 42” x 69” 12” 260.60 RT CBFD042-45ST Cone Bottom Stand 210.10 RT CB0350-42 350 Gallon-45˚ 42” x 93” 12" 411.60 RT CB042-45ST Cone Bottom Stand 236.40 RT CB0500-52 500 Gallon-45˚ 52” x 92” 12" 416.20 RT CB052-45ST Cone Bottom Stand 351.00 RT CB0800-86 800 Gallon-15˚ 86” x 58” 16" 534.00 RT CB086-15ST Cone Bottom Stand 772.00 RT CB1000-64 1000 Gallon-45˚ 64” x 112” 16” 792.00 RT CB1490-64 1490 Gallon-45° 64” x 146” 16” 935.00 RT CB064-45ST Cone Bottom Stand 605.00 RT CB1000-90 1000 Gallon, 15° 90” x 54” 16” 612.00 RT CB1300-90 1300 Gallon, 15° 90” x 65” 16” 735.00 RT CB090-15ST Cone Bottom Stand (for 1000 & 1300 Gallon Tanks) 787.00 RT CB1150-90 1150 Gallon-15° 90” x 78” 16” 696.00 RT CB090-15ST Cone Bottom Stand 787.00 RT CB1300-90 1300 Gallon-15° 90” x 75” 16” 735.00 RT CB090-15ST Cone Bottom Stand 787.00 RT CB1500-96 1500 Gallon-30° 96” x 92” 16” 697.00 RT CB2000-96 2000 Gallon-30° 96” x 108” 16” 839.00 RT CB096-30ST Cone Bottom Stand 1163.00 RT CB1600-90 1600 Gal.-30˚ 90” x 85” 16" 865.00 RT CB090-30ST Cone Bottom Stand 984.00 RT CB2500-90 2500 Gallon-15° 90” x 122” 16” 1072.00 RT CB090-15ST Cone Bottom Stand 787.00 RT CB2600-90 2600 Gallon-30˚ 90” x 132” 16" 1329.00 RT CB090-30ST Cone Bottom Stand 984.00 RT CB2600-86 2600 Gallon-45˚ 86” x 158” 16" 1328.00 RT CB086-45ST Cone Bottom Stand 976.00 RT CB3000-90 3000 Gallon, 15˚ 90” x 138” 16" 1422.00 RT CB090-15ST Cone Bottom Stand 787.00 RT CB4600-102 4600 Gallon, 15˚ 102” x 166” 16" 2993.00 RT CB4900-102 4900 Gallon, 15˚ 102” x 170” 16" 3303.00 RT CB102-15ST Cone Bottom Stand 1064.00 RT CB6900-122 6900 Gallon, 15˚ 122” x 178” 16” 4116.00 RT CB8250-122 8250 Gallon, 15˚ 122” x 206” 16" 5029.00 RT CB122-15ST Cone Bottom Stand 2317.00 * FD Tank Includes 2” FPT Bottom Fitting. F.O.B. Factory

PCO Tanks Part No. Description Dimensions Lid Fitting RT PCO35 35 Gallon No Sump 16”x35”x21”H 5" 1" RT PCO50 50 Gallon No Sump 19”x38”x23”H 8" 1" RT PCO50S 50 Gallon With Sump 19”x38”x23”H 8" 1" RT PCO100 100 Gallon No Sump 30”x38”x29”H 8" 1" RT PCO100S 100 Gallon With Sump 30”x38”x29”H 8" 1" RT PCO150 150 Gallon No Sump 37”x48”x29”H 12" 1-1/4" RT PCO150S 150 Gallon With Sump 37”x48”x29”H 12" 1-1/4" RT PCO200 200 Gallon No Sump 37”x48”x38”H 12" 1-1/4" RT PCO200S 200 Gallon With Sump 37”x48”x38”H 12" 1-1/4" RT PCO300 300 Gallon No Sump 37”x69”x40”H 16" 2" RT PCO300S 300 Gallon With Sump 37”x69”x40”H 16" 2" Band Pairs (Powder Coated Silver): Part No. Description Dimensions RT PCO35SB *One Pair - 35 Gallon Tank 2” x 50.5” RT PCO50SB One Pair - 50 Gallon Tank 2.5” x 57.5” RT PCO100SB One Pair - 100 Gallon Tank 2.5” x 76” RT PCO150SB One Pair - 150 Gallon Tank 3.5” x 82” RT PCO200SB One Pair - 200 Gallon Tank 3.5” x 98” RT PCO300SB One Pair - 300 Gallon Tank 4” x 100” * Bands for 35 Gallon Tank are Stainless Steel.

Wt. 3 lbs. 6 lbs. 10 lbs. 15 lbs. 18 lbs. 20 lbs.

Net Ea. $ 27.70 33.85 36.80 53.35 74.75 97.00

- Yellow Color -

• Molded in gallonage indicators on end

These Narrow Diameter (23”) Cone-Bottom Tanks include the same great features as the tanks above and are designed to fit into tight spots and narrow doorways. They are rated to hold liquids up to 16 lbs./gal. Standard with (1) 1-1/2” FPT poly bottom fitting and flat spot on sidewall for additional fitting. Gallonage Diameter Bottom Part No. & Cone X Height Lid Fitting Net Ea. RT CB055-23 55 Gallon-15° 23” x 52” 8" 1-1/2” $ 97.00 RT CB0100-23 100 Gallon-15° 23” x 78” 8” 1-1/2” 153.60 RT CB023-15ST Cone Bottom Stand for 23” Dia. Tanks (13” Floor Clearance) 108.10

(800) 228-9666

Wt. Net Ea. 25 lbs. $ 107.60 25 lbs. 118.10 25 lbs. 118.20 50 lbs. 183.90 50 lbs. 183.90 61 lbs. 196.00 61 lbs. 221.20 82 lbs. 273.80 82 lbs. 273.80 160 lbs. 585.00 160 lbs. 585.00

Heavy Duty Polyethylene PCO TANKS

D

Narrow Diameter (23” Dia.) Cone-Bottom Storage Tanks

DULTMEIER SALES • OMAHA, NE

• Use for stationary or transportable (non-D.O.T. regulated) applications: indoors & outdoors. • Tanks have a rounded bottom for best liquid drainage and optional 2” deep x wide sump. • Constructed of medium-density polyethylene with U.V. inhibitors: rated to 14 lbs/gal. • 300 Gallon tanks D include an internal baffle for support & liquid control. • Securely anchor for use in transport applications; use powder coated steel bands shown. • Translucent white color is standard; gallonage markers included. • “Notched” recess at top in 4 places so bands hold tank more securely from sliding.

and sidewall.

• Rectangular "Leg" Tanks • 5" Fillwell & splashguard on 30 thru

• Ribbed for extra strength with U-V

• Flat area on each end for fittings or

• Ideal for agricultural, lawn care and

• Attractive compact design requiring

• Ultra-Violet Inhibitors.

100 Gallon, 10" Fillwell & splashguard on 150 & 200 gallon. agitation. (order fittings separately).

no complex saddling or support structures.

inhibitors added for protection against sunlight. commercial turf uses.

Note: 16" Fillwell & Stainless Baffle standard on 300 Gallon Tank

Lid Part No. Capacity Size Width Height Length Wt. RV 47024 15 Gallon 5" 12" 15" 25" 35 lbs. RV 47022 30 Gallon 5" 19" 20" 25" 16 lbs. RV 47013 50 Gallon 5" 19" 20" 38" 23 lbs. RV 47020 100 Gallon 5" 30" 26" 38" 42 lbs. RV 47350 150 Gallon 10" 36" 26" 48" 63 lbs. RV 47352 200 Gallon 10" 36" 35" 48" 80 lbs. RV 47359 300 Gallon 16" 36" 35" 69" 133 lbs.

www.dultmeier.com

• DAVENPORT, IA

(800) 553-6975

Net Ea. $ 84.30 107.80 117.90 185.40 223.70 287.90 704.00

E0405


Poly Tanks 1,000 • 1250 • 1600 Gallon Elliptical Tanks & Skids STANDARD FEATURES • 8.5” Deep Sumps for Complete Drainout. (6’ Deep on 1600 gallon) • (3) Strap Recesses are Provided Around the Tank to Facilitate Anchoring. • Gallon/Liter Fluid Level Indicators are Included On One End & One Side of the Tank. • Tank Requires the Bottom to be Fully Supported with Skid for Use. • Tank is Furnished with 2” FPT and 1-1/4” FPT Polypropylene Fittings with Santoprene Gaskets.

• 16” Vented Lid Assembly is Standard. • Manufactured from Rotationally Molded Polyethylene with U.V. Stabilizers. • Standard Colors is Off White. (Yellow is Available). • Designed for the Containment of Chemicals with a Specific Gravity of 1.7 (14 lbs./Gal.). • Interior baffle included in 1250 & 1600 gallon tanks.

349

Elliptical Polyethylene Tanks 200 to 2,550 Gallons Designed for 12 lb. Material

D

Features: Heavy-duty, field proven polyethylene • Ultra-violet inhibitors added to protect against sunlight • Elliptical shape provides added visibility, and tank’s low profile allows easy-reach filling • Flat spots located on both ends of tank for sparger plumbing. • Standard color is yellow. Sump Wt. Part No. Lid Fittings Capacity W x L x H Depth Lbs. Net Ea. RV 47086 16" 3/4" & 11/4" 200 Gallon 40" x 66” x 26” 3/4" 90 $ 307.10 RV 40720 16" Two 11/4" 300 Gallon 48” x 70” x 30” 3" 113 395.10 RV 40369 16" Two 11/4" 500 Gallon 57” x 82” x 36” 2" 159 542.00 RV 47076 16" One 2" 750 Gallon 69" x 88” x 42” 3" 231 747.00 RV 47103 16" One 2" 1000 Gallon 78” x 90” x 49” 3" 300 939.00 RV 47129 * 16" One 2" 1600 Gallon 78" x 138” x 49” 2.5" 421 1466.00 * NOTE: 1600 Gallon tank includes a stainless steel baffle installed.

D

Saddle & Strap Kits Tank Part No. Capacity Fitting W x L x H Wt. Net Ea. RT HED1000 1000 Gallon with 16” Lid 2” 78”x90”x49” 400 lbs. $ 921.00 RT HED1250 1250 Gallon with 16” Lid 2” 78”x92”x60” 400 lbs. 1328.00 RT HED1600 1600 Gallon with 16” Lid 2” 78”x138”x49” 440 lbs. 1402.00 Skids with Bands (Required) Part No. Description Wt. Net Ea. RT HE1000C 1000 Gallon Black Skid with Silver Bands....... 520 lbs. $ 969.00 RT HE1250C 1250 Gallon Black Skid with Silver Bands....... 520 lbs. 1010.00 RT HE1600C 1600 Gallon Black Skid with Bands................ 578 lbs. 1409.00

for Norwesco Elliptical Tanks Above

D

Smaller Elliptical Tanks & Skids 200 to 850 Gallons Silver Bands Standard

Saddle Kits Include Saddles, Straps & Bolts Part No. RT HE0200-C RT HE0300-C RV 63018 RT HE0750-C RV 60372

Black Skids Standard

These tanks include the same great features as the elliptical tanks but in a more compact size. All sizes are rated to 1.7 S.G. (14 lbs./gal.). Low center of gravity makes these tanks ideal for stationary or mobile use (non DOT regulated) and improved visibility. Translucent off-white color is standard. Sump is located directly under the lid. Gallonage indicators one side and one end. Skids and bands are powder-coated.

We Now Have Our Catalogs as Well as Parts Schematics Online!

Sump Wt. Depth Lbs. Net Ea. 2.5" 84 $ 314.20 2.5” 114 397.50 2.5” 129 391.90 8.5” 167 544.00 2.5” 167 544.00 8.5” 222 639.00 8.5” 248 726.00

(800) 228-9666

Net Ea. $ 282.80 324.30 615.00 628.00 966.00

www. dultmeier.com

Skids with Bands (Required) Part No. Capacity Bands Net Ea. RT HE0200-C 200 Gal. 3” x 61”................................................................... $ 282.80 RT HE0300-C 300 Gal. 3” x 74”................................................................... 324.30 RT HE0400-C 400 Gal. 3” x 88”................................................................... 335.40 RT HE0500-C 500 Gal. 4” x 88”................................................................... 436.40 RT HE0750-C 750 Gal. 4” x 91”................................................................... 628.00 RT HE0850-C 850 Gal. 4” x 99”................................................................... 632.00

DULTMEIER SALES • OMAHA, NE

Wt. 80 lbs. 175 lbs. 271 lbs. 315 lbs. 380 lbs.

Visit Our Web-Site:

D

Elliptical Tanks Part No. Capacity W x L x H Fitting Lid RT HE0200-41 200 Gal. 41” x 66” x 26” 3/4” & 1-1/4” 16" RT HE0300-48 300 Gal. 48” x 70” x 30” 3/4” & 1-1/4” 16” RT HE0400-57 400 Gal. 57” x 70” x 36” 3/4” & 1-1/4” 16” RT HED0500-57 500 Gal. 57” x 82” x 36” 3/4” & 1-1/4” 16” RT HE0500-57 500 Gal. 57” x 82” x 36” 3/4” & 1-1/4” 8” RT HED0750-69 750 Gal. 69” x 89” x 42” 1-1/4” & 2” 16” RT HED0850-69 850 Gal. 69” x 89” x 46” 1-1/4” & 2” 16”

For Tank Size Saddle Kit for 200 Gallon Elliptical Saddle Kit for 300 Gallon Elliptical Saddle Kit for 500 Gallon Elliptical Saddle Kit for 750 Gallon Elliptical Saddle Kit for 1000 Gallon Elliptical

www.dultmeier.com

E-Mail us: dultmeier@dultmeier.com

• DAVENPORT, IA

(800) 553-6975

E0404


Polyethylene Horizontal Tanks

350

Spray/Transport/Nurse Tanks

Horizontal Leg Tanks 65 to 1650 Gallons

These Polyethylene Tanks are Designed for 12 lb. Material D

Features: Self-supporting molded-in legs • 2" siphon withdrawal is standard • Heavy duty polyethylene with ultra-violet inhibitors added for protection from sunlight • Gallonage indicators • Hold down hoops are available • Standard color is yellow. Note: Model 47256 is white in color.

Capacity

Dia. Length Fillwell

Wt.

Features: High quality polyethylene with UV protection • Heavy-duty steel skids & hoops • 16" vented lids (22” available) • Molded-in gallonage markers • 3 year warranty • 14 Lbs./Gal. rating (16 Lbs./Gal. available) • Some models sumped • 2" Polypropylene bulkhead fitting is standard. Tank-Less Hoops

Net Ea.

RV 45197 65 Gallon 23" 43” 5" 27 lbs. $ 133.70 RV 41344 225 Gallon 38" 49” 5" 72 lbs. 307.50 RV 41345 325 Gallon 38" 68” 16" 100 lbs. 370.00 RV 47256 * 500 Gallon 48" 75" 16" 139 lbs. 526.00 RV 47358 500 Gallon 48" 75" 16" 172 lbs. 509.00 RV 47211 750 Gallon 48" 107" 16" 246 lbs. 790.00 RV 47274 1000 Gallon 48" 139" 16" 302 lbs. 1083.00 RV 47191 1650 Gallon 62" 139" 16" 400 lbs. 1928.00

Steel Hoops for Above Tanks (Required):

Part No. RT FS048-HP RT FS062HP * White in Color. RT FS1065-HP RT FS062HP-1300 RT FS062HP-17 Hold Down Hoops for Leg Tanks RT FS062HP-1800 Part No. Description Net Ea. RT FS062HP-2600

RV 61745 RV 60478 RV 67101 RV 67246

One Hoop for 23" Diameter Tank.........................  $ 26.40 One Hoop for 38" Diameter Tank......................... 60.00 One Hoop for 48" Diameter Tank......................... 63.20 One Hoop for 62" Diameter Tank......................... 88.95

Description For Tank Net Ea. 1 Set of 3 Hoops........................ 735 Gallon $ 166.70 1 Set of 2 Hoops........................ 925 Gallon 153.60 1 Set of 3 Hoops........................ 1065 Gallon 227.30 1 Set of 3 Hoops........................ 1300 Gallon 228.30 1 Set of 4 Hoops........................ 1750 Gallon 300.00 1 Set of 4 Hoops........................ 1800 Gallon 301.00 1 Set of 6 Hoops........................ 2600 Gallon 427.30

Skid Frames for Above Tanks (Required for Tanks with Sump): Part No. RT FS925-SK RT FS1065-SKS RT FS1065-SKW RT FS1300-SK RT FS1750-SK RT FS1800-SK RT FS1800-SKW RT FS2600-SK

Narrow Width 2400 Gallon Horizontal Leg Tank Fits Inside Standard Dump Truck Beds

Description Net Ea. Skid for 925 Gallon Tank................................. $ 424.20 Skid for 1065 Gallon Tank with sump.............. 503.00 Skid for 1065 Gallon Tank less sump.............. 338.40 Skid for 1300 Gallon Tank............................... 615.00 Skid for 1750 Gallon Tank............................... 909.00 Skid for 1800 Gallon Tank with sump.............. 798.00 Skid for 1800 Gallon Tank less sump.............. 612.00 Skid for 2600 Gallon Tank............................... 1026.00

1010 & 3200 Gallon Total Drain Leg Tanks

- Only 78” Wide • Only 78” Wide x 120” Long. • 77” Tall to Manway (Less Skid). • Molded in Baffles. 16" Top Lid.

D

• Optional Steel Skid - Required with Bottom Sump.

FS0735-48

FS1750-62S

Diameter Part No. Size x Length Sump Lid Wt. Net Ea. RT FS0735-48 735 Gallon 48” x 103” No 16" 250 lbs. $ 713.00 RT FS925-DS 925 Gallon 62” x 81” Yes 16" 290 lbs. 807.00 RT FS925-DW 925 Gallon 62 “x 81” No 16" 290 lbs. 807.00 RT FS1065-58S 1065 Gallon 56” x 106” Yes 16" 340 lbs. 1061.00 RT FS1065-58W 1065 Gallon 56” x 105” No 16" 340 lbs. 935.00 RT FS1300-DS 1300 Gallon 62” x 114” Yes 16" 425 lbs. 1167.00 RT FS1300-DW 1300 Gallon 62” x 114” No 16" 425 lbs. 1324.00 RT FS1750-62S † 1750 Gallon 62” x 147” Yes 16” 540 lbs. 1803.00 RT FS1750-62W † 1750 Gallon 62” x 147” No 16” 540 lbs. 1803.00 RT FS1800-2S * 1800 Gallon 62” x 149” Yes 16" 580 lbs. 1571.00 RT FS1800-2W * 1800 Gallon 62” x 149” No 16" 580 lbs. 1571.00 RT FS2600-2S 2600 Gallon 62” x 212” Yes 16” 850 lbs. 2389.00 RT FS2600-2W 2600 Gallon 62” x 212” No 16” 425 lbs. 2354.00 F.O.B. Factory. * 1800 gallon tank is a two compartment tank on a single skid. † 1750 Gallon tanks include poly internal baffle.

Gallon Required Size Hoops Dia. 65 2 23" 225 2 38" 325 2 38" 500 2 48" 750 3 48" 1000 4 48" 1650 4 62"

Nurse Tanks Part No.

D D

Tanks are equipped with moldedin legs to support tank and band. Locators for tie down. Designed for 14 lb./gal. liquids. 3200 Gallon Elliptical is two tanks interlocked on a single skid, with 2" fitting in each sump. Additional optional fittings can be installed. 1010 Gallon Tank is horizontal and has a 2" outlet.

3200 Gallon Elliptical

D

• 2” or 3” Bulkhead Fittings Polypropylene or Stainless.

Tank-Less Hoops Size Diameter Part No. (Gallon) x Length Sump Lid RT FS1010-48 1010 48” x 130” Yes 16" RT FS3200-2S 3200 88”x172”x74” Yes 16"

• 15 Lb./Gallon Rating.

Part No. RT FS2400 2400 Gallon Tank without Sump RT FS2400-SK Skid for Tank without Sump Note: Skids are available

Net Ea. $ 965.00 3066.00

Steel Hoops for Above Tank (Required):

Tank with optional skid

• Hoops Included.

Wt. Lbs. 350 1100

Part No. RT FS1010-HP RT FS3200-HP

Description Net Ea. 1 Set of 4 - 1-1/2" Diameter Pipe......... $ 221.20 1 Set of 4 - 1-1/2” Diameter Pipe......... 373.70

Skid Frames for Above Tank (Required for Tanks with Sump):

Call for Pricing!

DULTMEIER SALES • OMAHA, NE

(800) 228-9666

Part No. RT FS1010-SK RT FS3200-SK

www.dultmeier.com

Description Dia.xLgth. Wt. Net Ea. 1010 Gallon Skid 53" x 115" 409 lbs. $ 633.00 3200 Gallon Skid 92" x 168" 1600 lbs. 1697.00

• DAVENPORT, IA

(800) 553-6975

E0406


Poly Elliptical Tanks • Pickup Tanks Horizontal Elliptical Leg Tanks

351

Horizontal Elliptical Leg Tanks with Sump for Complete Drainout

FS2350-88 Shown On Optional Skid FM1610-78S Shown on Required Skid

D

STANDARD FEATURES

STANDARD FEATURES

• Poly Baffle included inside tank (full height).

• Poly Baffle included inside tank (full height).

• Slopes to End Sump with 3” Fitting Standard for Complete Drainout.

• 14 Lb./Gal. Rating; Elliptical shape; Free Standing. • 3" HD Polypropylene fitting with siphon tube, opposite lid.

• 14 Lb./Gal. Rating; Elliptical shape; Free Standing. • Gallonage indicators one side and each end.

• Gallonage indicators one side and each end. D

• Steel support hoops with powder coat paint, Black. • Ladders available for 3250-4250 gallon sizes.

• Standard Off White color; Black & Yellow available. • Ladders available for 3250-4250 gallon sizes.

Interior Baffle

TANKS

D

• Steel support hoops with powder coat paint, Black.

• Standard Off White color; Black & Yellow available.

Interior Baffle

TANKS

Part No. Gallon Fillwell Width Height Length Outlet Wt. Net Ea. RT FS1610-78 1610 16" 78" 58" 139" 3" 530 lbs. $ 1940.00 RT FS2350-88 2350 16" 88" 63" 146" 3" 920 lbs. 2914.00 RT FS2750-88 2750 16” 88” 70” 146” 3” 1150 lbs. 3525.00 RT FS3250-88 3250 16" 88" 79" 146" 3" 1208 lbs. 3682.00 RT FS3750-88 3750 16” 88” 91” 146” 3” 1422 lbs. 3859.00 RT FS4250-88 4250 16” 88” 101” 146” 3” 1617 lbs. 4323.00 HOOPS (Required for All Tanks):

HOOPS (Required for All Tanks):

Part No. RT FS1610-HP RT FS2350-HP RT FS2750-HP RT FS3250-HP RT FS3750-HP RT FS4250-HP

Part No. RT FM1610-HP RT FS2350-HPJ RT FS2750-HPJ RT FS3250-HPJ RT FS3750-HPJ RT FS4250-HPJ

Part No. Gallon Fillwell Width Height RT FM1610-78S 1610 16” 78” 58” RT FM2350-88S 2350 16" 88" 63" RT FM2750-88S 2750 16” 88” 70” RT FM3250-88S 3250 16" 88" 79" RT FM3750-88S 3750 16” 88” 91” RT FM4250-88S 4250 16” 88” 101”

Description Net Ea. 1 Set of (4) 1-1/4" Steel Hoops with “feet” for FS1610-78..... $ 328.30 1 Set of (4) 1-1/4" Steel Hoops with “feet” for FS2350-88 .... 617.00 1 Set of (4) 1-1/4" Steel Hoops with “feet” for FS2750-88..... 682.00 1 Set of (4) 1-1/4" Steel Hoops with “feet” for FS3250-88 .... 788.00 1 Set of Steel Hoops with “feet” for FS3750-88..................... 1179.00 1 Set of Steel Hoops with “feet” for FS4250-88..................... 1228.00

Note: Use Hoops with above “Feet” to hold tank on flatbed without skid.

Length Outlet Wt/Lbs. Net Ea. 139” 3” 530 $ 1918.00 146" 3" 920 2576.00 146” 3” 1150 3121.00 146" 3" 1208 3258.00 146” 3” 1422 3859.00 146” 3” 1617 4323.00

Description Net Ea. 1 Set of (4) 1-1/4” Steel Hoops for FM1610-78S .................. $ 323.20 1 Set of (4) 1-1/4" Steel Hoops for FM2350-88S .................. 542.00 1 Set of (4) 1-1/4" Steel Hoops for FM2750-88S .................. 601.00 1 Set of (4) 1-1/4" Steel Hoops for FM3250-88S ................. 692.00 1 Set of Hoops for FM3750-88S............................................ 1179.00 1 Set of Hoops for FM4250-88S............................................ 1228.00

SKIDS (Required for All Tanks):

NOTE: Use Hoops with “J” suffix at right (i.e. RTFS2350-HPJ) for FS Tanks going onto skid below.

Part No. Description Wt./Lbs. Net Ea. RT FM1610-SKE Skid for FM1610-78S Tank with End Sump, 78” x 139”........ 490 $ 1036.00 RT FM23-32E Skid for FM2350-4250 Gal. Tanks with End Sump, 88” x 141” 1060 1813.00

OPTIONAL SKID for FS2350-4250 Tanks. Part No. RT FS23-32SK

D

Description Wt. Net Ea. Skid for FS2350 - 4250 Gallon Tanks, 90” x 146” 1078 lbs. $ 1871.00

Low-Profile

Pick-up Tanks

Note: No Skid for FS1610-78 Tank.

205, 305 & 450 Gallon Capacity

Pick-Up Tanks Economical Pick-Up Tanks are used as applicator tanks or when transportable (non D.O.T. regulated) containment is required. Designed to fit most full size pickup trucks with containment of liquids up to 1.7 specific gravity. Made from mediumdensity polyethylene with U.V. inhibitors. Translucent tank walls for level viewing; equipped with gallon indicators. Part No.

Capacity

RT PU200 200 Gallon with 8” Lid RT PU350 350 Gallon with 8” Lid RT PU450 450 Gallon with 8” Lid Note: Siphon tube included.

Pick-Up Tanks will fit most pick-up beds. Features: Low profile for good visibility and low center of gravity • 2" bulk head withdrawal fitting • Positive lock fill well cap • Engineered design permits efficient use of space • Extra deep recess in fill well area reduces spillage during filling and while moving over rough terrain • Rated to 12 lbs./Gal. • Molded gallonage indicator. D

D

Fitting Dia. X Ht.

2” 2” 2”

Wt.

Net Ea.

52” x 30” 54 lbs. $ 177.30 62” x 34” 92 lbs. 305.60 62” x 41” 102 lbs. 316.20

Part No. Gallon Color Lid Size Wt. Net Ea. RV 47407 450 White 10” 160 lbs. $ 448.00 RT PU205 * 205 White 7” 87 lbs. 277.80 RT PU305 † 305 White 7” 107 lbs. 332.00 * Tank fits Ford Ranger, GMC Canyon, Chevy Colorado, Dodge Dakota, Nissan Frontier & Toyota Tacoma † Tank fits Ford F150,F250,F350; Dodge Ram 1500,2500,3500; Chevy Silverado 1500,2500,3500; GMC Sierra 1500,2500,3500; Toyota Tundra; & Lincoln Mark LT.

DULTMEIER SALES • OMAHA, NE

(800) 228-9666

www.dultmeier.com

• DAVENPORT, IA

(800) 553-6975

E0407


Poly Mini-Bulk Tanks • Pallet Paks

352

Polyethylene Stackable Tanks

- Stackable to 3 High -

Polyethylene Bulk Storage Tank

— 275 Gallon —

- Forkliftable (4-Way) Made of UV Protected blow molded HDPE with galvanized steel cages and galvanized steel forkliftable bases. Rated to 1.9 S.G. Stacks 3 high empty. 6" top lid includes proper tamper evident high D capacity vent. Also includes one-way ball valve (tamper-evident) and meets EPA August 2011 mini-bulk container requirements. 275PP-Z Part No. Gallons Dimensions Wt. Net Ea. CZ 275PP-Z * 275 40” x 48” x 46” H 158 lbs. $ 198.00 TK TL652EPA Replacement Vented Lid for 275PP-Z (EPA).............. 12.45 CZ DUSTCAP Dust Cap (2” FPT Threads)......................................... 1.80 CZ V20 2” Male Adapter Ball Valve(With Built-In Check Valve) 15.15 * Reconditioned Tanks (New polyethylene inside reconditioned cage).

This 70 Gallon Free Standing Stackable Leg Tank is ideal for storing bulk products up to 1.7SG (14# liquids).Medium density polyethylene with UV inhibitors. 24" deep x 39" long x 30" high with 5" lid and 1" outlet. Comes standard with santoprene gasket. Has band locators for tie down. Translucent walls for viewing with gallon indicators. Use Viton® gasket for oil. NOTE: Not for diesel, fuel or waste oil. For New oil only.

D

Part No. Description Wt. Net Ea. RT FS0070-24 70 Gallon Leg Tank......................... 38 lbs. $ 154.60

Polyethylene Stackable Tanks

White Poly Leg Tanks

— 70 & 120 Gallon —

• Free Standing Tanks for Indoor, Outdoor, Stationary or Mobile Applications. • Polyethylene with UV Stabilizer; Safe for 12.5 lbs./gal. Gallonage Indicator. • Use for Agchemicals, Fertilizers, Water, Soap, Bulk Oil, lubricants. (Not for use for “waste” oil due to contaminates). • (3) 2” FPT Ports & 7” Vented Lid Assembly with Lanyard & 4 Lift Ears. • 70 Gallon Tanks Stack 3 High; 120 Gallon Tanks Stack 2 High. • 4-Way Forkliftable Steel Skid Works with both 70 & 120 Gallon Tanks and Includes Black Powder-Coated Paint Finish.

Skids & Stands Sold Separately

• Rated to 14 lbs./Gal. • Translucent • Gallon Indicators

D

• Larger Sizes Available

Wt. Part No. Description Dimensions Lid Outlet Lbs. Net Ea.

D D

Dimensions Part No. Description (L x W x H) Wt. Net Ea. RT ST35-32 35 Gallon Stackable Tank 32” x 32” x 15” 30 lbs. $ 154.60 RT ST70-32 70 Gallon Stackable Tank 32” x 32” x 25” 42 lbs. 182.40 RT ST120-32 120 Gallon Stackable Tank 32” x 32” x 38” 77 lbs. 277.30 RT ST180-42 180 Gallon Stackable Tank 42” x 42” x 35” 126 lbs. 397.00 RT ST240-42 240 Gallon Stackable Tank 42” x 42” x 45” 164 lbs. 489.40 RT ST024-LG 24” Tall Leg Kit............................................................. 111.10 RT ST036-LG 36” Tall Leg Kit............................................................. 131.90 RT ST70-SK 70/120 Gallon Skid 30” x 30” x 8” 50 lbs. 126.80 RT ST180-SK 180/240 Gallon Stand 44" x 44” x 27” 175 lbs. 226.90 RT 19508 180/240 Gallon Tote Adapter 42” x 42” x 10” - 116.20

Plumbing Kits / Drip Trays These plumbing kits include tubing, polypropylene fittings and ball valves (with nozzle) for gravity flowing products from tank to floor level. Polyethylene drip trays capture spillage.

RT FS0035-18 RT FS0065-24 RT FS0125-32 RT FS0165-32 RT FS0225-38 RT FS0325-38 RT FS0035-B RT FS0065-B RT FS0125-B RT FS0225-B

35 Gallon Leg Tank 18” x 34” 5" 1” 16 $ 70.05 65 Gallon Leg Tank 24” x 39” 5” 1” 33 134.90 125 Gallon Leg Tank 32” x 40” 8" 1” 52 219.70 165 Gallon Leg Tank 32” x 54” 8” 1” 70 271.50 225 Gallon Leg Tank 38” x 52” 8” 2” 85 313.70 325 Gallon Leg Tank 38” x 72” 8” 2” 106 378.30 Band Set with feet for 35 Gallon Leg Tank............. 27.95 Band Set with feet for 65 Gallon Leg Tank............. 36.05 Band Set with feet for 125/165 Gallon Leg Tank............ 42.80 Band Set with feet for 225/325 Gallon Leg Tank............ 52.20

Polyethylene Rectangle Pallet Paks — Forkliftable — Pallet Paks include one or two tank pallets and frame. Tank walls are translucent for easy viewing and are marked with gallon indicators. Rated to 1.7 S.G. (14 lbs/Gallon). Metal frame with plastic base. 2" Bottom outlet fitting (not shown). 300 Gallon model can be stacked two high. Dimensions: 49" x 41" x 47"

D D

D

D

SP300

Part No. Description Net Ea. RT PL1 35, 70, 120, 180, or 240 Gallon Plumbing Kit for (1) Tank..... $ 24.75 RT PL2 35, 70, 120, 180, or 240 Gallon Plumbing Kit for (2) Tanks... 133.40 RT PL3 35, 70, 120, or 180 Gallon Plumbing Kit for (3) Tanks.......... 180.80 RT DT1 Drip Tray for 35, 70 & 120 Gallon Tanks, 5H x 20W x 35L..... 116.70 RT DT2 Drip Tray for 180 & 240 Gallon Tanks, 5H x 20W x 46L......... 129.30 DULTMEIER SALES • OMAHA, NE

(800) 228-9666

SP150 Bottom Wt. Part No. Capacity L x W x H Lid Outlet Lbs. Net Ea.

RT SP150-1 1 - 150 Gallon 43” x 26” x 47” 7” RT SP150 2 - 150 Gallon 50” x 50” x 48” 7" RT SP300 1 - 300 Gallon 50” x 50” x 47” 7"

2” 203 $ 429.30 2" 356 858.00 2" 316 622.00

Viton® is a registered trademark of DuPont Performance Elastomers

www.dultmeier.com

• DAVENPORT, IA

(800) 553-6975

E0622


Double Wall Tanks • Poly Tanks

Polyethylene Round Pallet Paks

Dualline™ Double Wall Poly Tanks Dualline™ Double Wall Tank’s strong, durable, quality construction is designed for the containment of chemicals rated for contact with polyethylene. Dualline™ tanks are freestanding double wall vertical tanks with a flat bottom for indoor or outdoor stationary applications. Double wall construction provides containment in the event the inner or primary tank is compromised. An EPDM elastic seal is standard and seals the primary tank to the secondary tank to prevent dirt and moisture from entering the containment space between tanks.

2” Optional Bottom Fitting

353

— Forkliftable —

D

1” Service Fitting Standard On Exterior Tank

D

VT110

Bottom Outlet Fitting can be added. Rated to 1.7 S.G. (14 lbs/Gallon)

VT210

Features: Top Part No. Capacity Lid Outlet Diameter

• Furnished with a 16” vented lid assembly as standard. • (3) Fitting flats are provided on the top for custom tank plumbing.

RT VT110 110 Gallon 5" RT VT0210-PP 210 Gallon 5"

• A 1” service fitting is provided on the secondary (exterior) tank in the event that the containment requires evacuation.

2" 2"

33" 41"

Base

Net Ea.

Square $ 242.40 Round 268.70

• Tanks manufactured from linear low density polyethylene with U.V. stabilizers.

40 & 60 Gallon Blow-Molded Poly Tanks

• Standard colors are white, yellow and black. Other colors available.

Constructed of blow-molded low density polyethylene with UV inhibitors for economy and lightweight. Both tanks include molded-in legs with black anchor feet, end sump with 3/4” drain cap, 5” lid with lanyard, band locator grooves and 4X10-24 brass inserts for pump mounting, and hose warp “horns”. Translucent with gallonage indicators. Rated for 14 lb./gal. liquids. Standard white color (Yellow available).

• Designed for the containment of all chemicals rated for contact with polyethylene. Standard weight tank is designed for chemicals with a specific gravity of 1.7 (14 lbs./gal.). Consult the Application Guideline Manual for known compatible chemicals and service temperatures. FDA compliant materials are available. Specific Part No. Capacity Dia. X Ht. Lid Fitting Gravity Wt. Net Ea. RT DW0065-28 65 Gallon 29” x 43” 16" - 1.7 52 lbs. $ 282.80 RT DW0120-36 120 Gallon 36” x 50” 16” - 1.7 81 lbs. 439.40 RT DW0150-36 150 Gallon 36” x 60” 16” - 1.7 99 lbs. 531.00 RT DW0300-57 300 Gallon 57” x 45” 16” - 1.7 190 lbs. 778.00 RT DW0500-57 500 Gallon 57” x 69” 16” - 1.7 264 lbs. 966.00 RT DW1000-77 1000 Gallon 77” x 82” 16” - 1.7 522 lbs. 1717.00 RT DW1500-77 1500 Gallon 77” x 119” 16” - 1.7 673 lbs. 2207.00 RT 19563 Optional 2” Bottom Fitting........................................................ 368.70

Cone Bottom Storage Tanks

Part No. RT SB30 RT SB40 RT SB60 RT 12499

Capacity Lid Length Width Height Wt. Net Ea. 30 Gallon 5" 36" 19” 18” 13.0 lbs. $ 45.45 40 Gallon 5” 36” 24” 19” 17.5 lbs. 64.40 60 Gallon 5” 36” 24” 26” 21.0 lbs. 83.75 Replacement 5” Lid with Lanyard..................................... 5.93

175 Gallons thru 500 Gallons • Heavy duty polyethylene with ultraviolet inhibitors added for protection against sunlight. Poly stands. • Offset fillwell & cover standard.

D

• Sidewall flat for recirculation.

D

• Molded-in gallonage marks. • Standard color is White. WARRANTY: 3-Year from factory ship date on cone bottom storage tanks - non-mobile applications.

Freshwater Tank A 9-Gallon Freshwater Tank with a hinged lid over a recess in the tank which can be used to store items required by EPA’s Worker Protection Standard (40 CFR170). The tank is designed so it can be mounted on spraying applicators or other equipment involved in the handling and application of pesticides. Tank is a white polyethylene to show level indicators and ensure compliance with FDA regulations. For mounting, 4-5/16" nuts are molded into the tank side and bottom.Includes 3/4” FPT port for D1050 spigot valve.

• 30° cone for tanks.

NOTE: These tanks designed for 12 lb/gal. liquids.

D

D

Size: 10”W, 14”H, 20”L Note: Tank should be flushed and refilled on a regular basis.

– Cone Bottom Tanks with Poly Stands –

Poly Part No. Capacity Diameter Height Fillwell Fitting Net Ea. RV 60113 175 Gallon 42" 49" 10" 3/4" $ 427.00 RV 62441 310 Gallon 42" 71" 16" 2" 528.00 RV 40289 500 Gallon 48" 85" 16" 2" 825.00

Part No. RV 47036 RV 5461R

Description Net Ea. Safety Tank with storage compartment. $ 147.60 Screw on lid for #26676......................... 7.27 Viton® is a registered trademark of DuPont Performance Elastomers

DULTMEIER SALES • OMAHA, NE

(800) 228-9666

www.dultmeier.com

• DAVENPORT, IA

(800) 553-6975

E1115


354

Planter Tank / Saddle / Strap Kits Planter Tank/Saddle/Strap Kits

These Planter Tank / Saddle / Strap Kits are Specifically Designed to Fit onto the Planter Models Shown Below • Models for John Deere™ & Bauer planters listed include yellow translucent tanks for easy viewing of fertilizer remaining in tank. Models for CASE IH planters listed include white translucent tanks. • All tanks include (1) 2” poly fitting (fill) and (1) 3/4” poly fitting (suction), both in bottom sump rated to 14 lbs./Gal. • Saddles are included with all tanks and are made of laser cut steel with powder coat paint finish (green for John Deere™ models & red for CASE IH models). Saddle straps for 300 gallon and larger tanks are steel with powder coat finish. • All mounting hardware is also included (zinc-plated steel bolts). No hose or plumbing is included. • Models also available for grain drills.

Planter / Saddle Kits for CASE IH Planters

Planter / Saddle Kits for JOHN DEERE™ Planters

Planter Tank/Saddle/Strap Kits for John Deere™ Planters (No plumbing included): Part No. DS 50-1001 DS 50-1002 DS 50-1003 DS 50-1004 DS 50-1005 DS 50-1006 DS 50-1007 DS 50-1008 DS 50-1009 DS 50-1010 DS 50-1011 DS 50-1012 DS 50-1013 DS 50-1014 DS 50-1015 DS 50-1016 DS 50-1017 DS 50-1018

Planter Description JD 1770NT CCS 12 Row 30”. JD 1770NT CCS 12 Row 30”. JD 1770NT CCS 16 Row 30”. JD 1770NT CCS 16 Row 30”. JD 1770NT CCS 16 Row 30”. JD 1770NT CCS 24 Row 30”. JD 1790 12/23 15”................. JD 1790 12/23 15”................. JD 1790 16/31 15”................. JD 1790 16/31 15”................. JD 1790 16/31 15”................. JD 1790 24 Row 20”.............. JD 1790 24 Row 20”.............. JD 1790 24 Row 20”.............. JD Bauer 24 Row 30”............ JD Bauer 32 Row 30”............ JD Bauer 36 Row 30”............ JD Bauer 48 Row 30”............

Tank Size & Shape 300 Gallon Elliptical Tank 400 Gallon Elliptical Tank 300 Gallon Elliptical Tank 400 Gallon Elliptical Tank 500 Gallon Elliptical Tank 500 Gallon Elliptical Tank 300 Gallon Elliptical Tank 400 Gallon Elliptical Tank 300 Gallon Elliptical Tank 400 Gallon Elliptical Tank 500 Gallon Elliptical Tank 300 Gallon Elliptical Tank 400 Gallon Elliptical Tank 500 Gallon Elliptical Tank 500 Gallon Elliptical Tank 500 Gallon Elliptical Tank 750 Gallon Elliptical Tank 750 Gallon Elliptical Tank

Net Ea. $ 2104.00 2266.00 2099.00 2170.00 2307.00 2338.00 2172.00 2260.00 2258.00 2330.00 2616.00 2251.00 2330.00 2524.00 2668.00 2274.00 3347.00 3113.00

Planter Tank/Saddle/Strap Kits for CASE IH Planters (No plumbing included): Part No. DS 50-2001 DS 50-2002 DS 50-2003 DS 50-2004 DS 50-2006 DS 50-2007 DS 50-2008 DS 50-2009

Planter Description CASE IH 1250 12 Row 30” CASE IH 1250 16 Row 30” CASE IH 1250 16 Row 30” CASE IH 1250 24 Row 30” CASE IH 1255 16 Row 30” CASE IH 1255 16 Row 30” CASE IH 1255 24 Row 30” CASE IH 1255 24 Row 30”

Tank Size & Shape 300 Gallon Round Tank 300 Gallon Round Tank 400 Gallon Round Tank 400 Gallon Round Tank 300 Gallon Round Tank 400 Gallon Round Tank 500 Gallon Elliptical Tank 750 Gallon Elliptical Tank

Net Ea. $ 2279.00 2165.00 2178.00 2274.00 2154.00 2203.00 2466.00 3482.00

KINZE 3600 All Models 2009 & Earlier: Part No. Description Net Ea. DS 50-3002 (2) 100 Gallon Round Tanks............................................................... $ 1765.00 Other KINZE Models Available & Models for White Planters Also Available - PLEASE CALL

“Universal” Planter Tank/Saddle/Strap Kits (No plumbing included): Part No. DS 50-5001 DS 50-5002 DS 50-5003

Description Universal 100 Gallon Universal 150 Gallon Universal 200 Gallon

DULTMEIER SALES • OMAHA, NE

(800) 228-9666

Tank Size & Shape 1-100 Gallon Round Tank 1-150 Gallon Round Tank 1-200 Gallon Round Tank •

www.dultmeier.com

• DAVENPORT, IA

Net Ea. $ 1100.00 995.00 1233.00

(800) 553-6975

E1059


Tractor Tank / Saddle / Strap Kits

355

Tractor Tank/Saddle/Strap Kits Custom designed, heavy duty, completeTractor SaddleTank Systems for most tractor makes and models including: John Deere, Case IH, New Holland, Challenger, AGCO/Allis/White, Buhler, Massey-Ferguson and McCormick International. Configurations include: Standard “Helicopter”, Low Profile Helicopter (with elliptical tanks), Front Dual Tire Helicopter Tanks, Tear Drop Style and 4 Wheel Drive Styles. Call with your make, model and year of tractor. Other Features: Saddle undercarriage brackets are constructed with 5/8” steel plate and welded with high strength flux core wire. Painted finish includes two-part epoxy primer and two-part polyurethane top coat; this PPG paint is extremely durable and salt spray tested. Round Tanks have 5” top lids. Elliptical Tanks have 16” top lids. Two 1-1/4” FPT fittings on the bottom of each tank.

Side & Front Mounted Tanks for Case IH

Elliptical Tanks on a John Deere Tractor with Front Dual Tires

500 Gallon Side Mount Tanks on a John Deere

Saddle Tanks have custom made undercarriage brackets that allow you to mount them on every newer model of John Deere tractor. They are available in 200, 300, 400 and 500 gallon capacity for side mounted tanks. There are also custom designed step up bar packages that fit tractors with front dual tires. The parallel tank mount allows for greater visibility. All tanks have high clearance for row crop applications.

DULTMEIER SALES • OMAHA, NE

(800) 228-9666

Call With Your Make, Model & Year of Tractor for Pricing !

www.dultmeier.com

• DAVENPORT, IA

(800) 553-6975

E1123


Poly Specialty Tanks

356 Applicator Tanks

Rectangular Tanks

- Bottom is Sloped to Drain -

- Flat Bottom • Rated for 14 lb./gal. liquid • Translucent (off-white) • Gallonage indicators. • 5” Lid

• Rated for 14 lb./gal. a • Translucent (off-white) • Gallonage Indicators • “Loaf” or rectangle style • Grooves for straps D

• 5” Lid

D

SP12-RT Part No.

Capacity

Style

RT SP8-VM 8 Gallon Loaf RT SP12-RT 12 Gallon Rectangular RT SP19-VM 19 Gallon Loaf RT SP20-LC 20 Gallon Rectangular

Fitting

W x L x H

1/2” 3/4” 1/2” 3/4”

12”x16”x17” 14”x18”x12” 12”x16”x28” 14”x28”x12”

Wt.

Net Ea.

SP6-5N

6 lbs. $ 47.60 9 lbs. 51.20 15 lbs. 70.75 11 lbs. 66.55

Part No.

RT SP002.8RT RT SP5-RT RT SP6-5N RT SP7-RT RT SP16-MM RT SP20-OM RT SP55-MM

Small Polyethylene Sloped Bottom Tanks • Rated for 14 lb./gal. liquid • Translucent (off-white) • Gallonage indicators. • Sloped Bottoms for Complete Drainage. D

PY 8639 SP4-SQ8 Part No. Capacity RT SP2.5RT * 2.5 Gallon Rectangular with 5” Lid PY 8639 3.5 Gallon Cylinder with 5” Lid RT SP4-SQ8 4 Gallon Square with 8” Lid RT SP5-SQ8 5 Gallon Square with 8” Lid RT SP10-SQ8 10 Gallon Square with 8” Lid RT SP15-SQ8 15 Gallon Square with 8” Lid * 2.5 Gallon Tank is Blow-Molded.

Fitting 3/4” 3/4” 1-1/4” 1-1/4” 1-1/4” 1-1/4”

W x L x H Wt. Net Ea. 7”x15”x14” 3 lbs. $ 31.40 11”x16” 4 lbs. 30.95 11”x11”x14” 4 lbs. 47.00 11”x11”x18” 6 lbs. 46.85 13”x13”x21” 10 lbs. 64.90 16”x16”x22” 16 lbs. 79.80

D

None None None None None 1/2” 1”

W x L x H

Wt.

Net Ea.

9”x14”x9” 4 lbs. $ 29.55 10”x22”x8” 5 lbs. 35.15 12”x15”x8” 5 lbs. 37.80 9”x14”x15” 7 lbs. 42.25 14”x21”x14” 9 lbs. 49.10 11”x15”x31” 16 lbs. 76.80 18”x18”x45” 30 lbs. 120.10

• Rated for 14 lb./gal. liquid • Gallonage indicators • Translucent (off-white) • Grooves for straps • Flat Bottom • Powder-Coated Bands (sold separately) • Santoprene Gasket

D

SP68-RT

D

SP26-RT Part No.

Capacity

Fitting

W x L x H

Wt.

Net Ea.

110, 200 & 300 Gallon Low Profile Poly Tanks

Net Ea. $ 46.85 168.00 204.00

Polyethylene Fuel Tanks Made from high-density crosslinked polyethylene with UV stabilizers. Designed to hold gasoline, diesel and other compatible chemicals weighing up to 14.5 lbs./Gal. Standard in black color with one 1/4” brass bulkhead fitting in the bottom.

D

Fitting

RT SP26-RT 26 Gallon with 8” Lid 3/4” 18”x25”x19” 14 lbs. $ 81.60 RT LP50-RT 50 Gal. with 5” Hinged Lid 1” 24”x43”x15” 35 lbs. 143.30 RT SP68-RT 68 Gallon with 6” Lid 1” 26”x42”x17” 40 lbs. 167.70 RT SP80-RT 80 Gallon with 5” Lid 1” 18”x27”x44” 42 lbs. 157.60 RT SP100-RT 100 Gallon with 8” Lid 1” 27”x43”x29” 48 lbs. 178.80 RT SP150-RT 150 Gallon with 8” Lid 1” 36”x48”x29” 60 lbs. 211.60 RT SP0200RT 200 Gallon with 8” Lid 1” 36”x48”x38” 80 lbs. 261.60 RT LP50-SBP Band Set for 50 Gallon Tank..................................... 27.90 RT SP68-SBP Band Set for 68 Gallon Tank..................................... 31.80 RT SP80-SBP Band Set for 80 Gallon Tank..................................... 38.60 RT SP100-SBP Band Set for 100 Gallon Tank................................... 37.75 RT SP150-SBP Band Set for 150 Gallon Tank................................... 38.20 RT SP0200-SBP Band Set for 200 Gallon Tank................................... 42.95 Note: Other sizes available.

Air Purge Tank Great for purging air from rail or truck unloading pipes. Simply open SS “dead man” (spring return valve) at suction pipe line to purge air into tank. Can also be used to flood RV antifreeze into pump suction to winterize.Tank has molded-in screw inserts (5/16” - 18NC) on back side. Screws ship with stand. Plumbing kit with “Deadman” valve, tubing, etc. Sold separately. 1-1/4” Bottom fitting. Tank Dimensions are 11” W x 11” L x 19” H. Description 5 Gallon Square Tank with 8” Lid Stand Only.................................. Plumbing Kit................................

Capacity

2.8 Gallon with 5” Lid 5 Gallon with 5” Lid 6 Gallon with 5” Lid 7 Gallon with 5” Lid 16 Gallon with 5” Lid 20 Gallon with 5” Lid 55 Gallon with 5” Lid

• (8) 5/16-18 Threaded Inserts On One Side (For Mounting).

5 Gallon

Part No. RT SP5-SQ8 DU TS5 DU 1C034

SP55-MM

SP5-RT

Rectangular Utility Tanks

• Variety of uses in stationery & portable applications.

D

D

SP19-VM

SP12B Part No.

Capacity

Dimensions

Lid

Wt.

Net Ea.

RT SP6B RT SP12B

6 Gallon 12 Gallon

10”x15”x10” 14”x18”x12”

2” 2”

5 lbs. 9 lbs.

$ 74.50 88.80

DULTMEIER SALES • OMAHA, NE

(800) 228-9666

Features: Low profile for mobile or stationary applications • Rated for 14 lb./gal. products • Medium density polyethylene with UV stabilizers • Gallonage indicators on one side and end • Two recesses for anchoring bands • Steel band kit includes silver powder coat finish.

D

Part No. Capacity Lid Fitting Dimensions Wt. Net Ea. RT LP110-RT 110 Gallon 5” 1” 35”x48”x19” H 59 lbs. $ 207.60 RT LP0200-RT 200 Gallon 8" 1" 48”x60”x19” H 84 lbs. 266.20 RT LP0300-RT 300 Gallon 8” 2” 80”x48”x21” H 135 lbs. 413.80 RT LP110-SBP 110 Gallon Band Kit................................ 8 lbs. 37.15 RT LP0200-SBP 200 Gallon Band Kit................................ 14 lbs. 51.75 RT LP0300-SBP 300 Gallon Band Kit................................ 16 lbs. 66.95

www.dultmeier.com

• DAVENPORT, IA

(800) 553-6975

E0698


Poly • Inductor • Containment Tanks Inductor Systems 15, 30, 85 & 110 Gallon

D

1A30

MIX-N-FIL Tank Chemical Inductors Polyethylene Mix-N-Fil Chemical Inductor Tank has a 16” Lids, 2" FPT Bottom Outlet. 15, 30 and 55 gallon tanks have molded in gallonage marks in 1/2 gallon increments while the 85 gallon is marked in 5 gallon increments. Chemicals are added to the liquid as it flows through the suction line. Note: No 16” lids available for Model #110T. (12” Lid)

15, 30 & 85 Gallon Inductor Tanks feature Banjo polyethylene flange fittings. Includes a water flush and jug rinse hose with 16" fill lid (12” lid on 110 gallon), 2” or 3” manifold system. Unit is plumbed with bypass loop for induction control. Note: All units shipped assembled as shown.

Fitting Package

Part No. Description Wt. Net Ea. DU 1A15 15 Gallon Inductor with 2” Manifold System 35 lbs. $ 759.00 DU 1A15A 15 Gallon Inductor with 3” Manifold System 35 lbs. 943.00 DU 1A30 30 Gallon Inductor with 2” Manifold System 65 lbs. 782.00 DU 1A30-SS Sames as 1A30 - But with 30 Gallon Stainless Tank (Complete Drain)............... 65 lbs. 1682.00 DU 1A30-CB Same As 1A30 - But Includes “Chem Blade” Jug Rinse System........................................ 65 lbs. 1254.00 DU 1A30A 30 Gallon Inductor with 3” Manifold System 70 lbs. 966.00 DU 1A30A-CB Same As 1A30A - But Includes “Chem Blade” Jug Rinse System 70 lbs. 1473.00 DU 1A60-SS Sames as 1A60 - But with 60 Gallon Stainless Tank (Complete Drain) 60lbs. 1911.00 DU 1A85 85 Gallon Inductor with 2” Manifold System 100 lbs. 887.00 DU 1A85A 85 Gallon Inductor with 3” Manifold System 105 lbs. 1070.00 DU 1A110A 110 Gallon Inductor with 3” Manifold System - 1099.00

(sold separately) Use Only on Suction Side of Pump

Part No. RT 15T RT 15ST RT 30T RT 60T RT 30SSL RT 60SSL RT 30ST RT 85T RT 110T RT 85ST

35 & 60 Gallon Full Drain Blow Molded Inductor Tanks

Features: Tanks and legs constructed of blow-molded polyethylene with UV stabilizers for economy and strength • Stainless fasteners • 2” FPT full drain outlets (with stainless hose clamp for extra strength) • Gallon/Liter indicators on one side • 12” Non-vented lid assembly with lanyard • Rated to 14 lb./gal. Liquids • Stationary or mobile applications. 12695 Leg Anchor Kit available at additional cost (not included). Part No. RT IB35 RT IB60 RT 12695

357

DU MF200 DU MF200A RT 10508 RT 10113 RT 12003

D

MF200 D

MIX-N-FILLTanks & Stands Dia. X Ht. 15 Gallon Inductor Tank.............. 19" x 24" Stand for 15 Gal. Inductor Tank... 19” x 29” 30 Gallon Inductor Tank.............. 24" x 27" 55 Gallon Inductor Tank.............. 24" x 43" 30 Gallon Inductor Tank Stainless.. 24” x 27” 55 Gallon Inductor Tank, Stainless. 24” x 43” Stand for 30 or 55 Gal. Inductor Tank. 24” x 33” * 85 Gallon Inductor Tank............ 30" x 43" 110 Gallon Inductor Tank............ 51" x 30" * Stand for 85 & 110 Gal. Inductor Tank 30” x 36”

Wt. 12 lbs. 15 lbs. 17 lbs. 24 lbs. 17 lbs. 24 lbs. 18 lbs. 35 lbs. 44 lbs. 40 lbs.

Net Ea. $ 76.30 62.90 97.00 114.20 1019.00 1242.00 66.80 166.70 195.00 119.20

2" Threaded Fitting Pkg............................................................ 44.25 2" Flanged Connection Fitting Package................................... 102.00 2” Polypro. Replacement Fitting (Includes Santoprene Gasket)........... 7.09 2” Santoprene Gasket............................................................... 1.82 2” Viton® Gasket...................................................................... 18.95

* 85 Gal. tank & stand styles changed in 2004. Prior year models will not fit new styles.

Inductor Units for Mix-N-Fil Tanks

D

Draws wettable powders or liquids from inductor tank for thorough chemical mixing!

12695

Leg Anchor Kit

1B60

Description Dimensions 35 Gallon Inductor Tank with Legs 24.5” x 24.5” x 43” 60 Gallon Inductor Tank with Legs 24.5” x 24.5” x 55” Replacement Stainless Leg Anchor Kit -

Net Ea. $148.50 172.30 26.60

Part No. TK MIS220A TK MIS300A

Net Ea. 2” Full Port Manifold Inductor System......... $ 334.80 3” Full Port Manifold Inductor System......... 512.00

Cleanload™ Chemical Eductors

For Safe Loading of Chemicals into Spray Tanks FEATURES:

• Self-Contained Eduction System, which allows the use of one system to mix liquid and dry chemicals. D

• 7.0 Gallon tank features a wide 16” lid, holds a full 51 lb. bag of dry material, and can be used to rinse larger 5.2 gallon jugs. • Educts 7 gallons of liquid in 10 seconds and a 51 lb. bag of AMS in 30 seconds. • CycloRinse™ System provides premium cleaning & meltdown of flowable powders with lid open for continuous fill operation. • Available in (3) Nozzle sizes designed for transfer pump, on-board sprayer and low flow roller/diaphragm applications. • Polypropylene Eductor features 220 universal flange ports and is available in either left-hand or right-hand flow configurations (Right-hand flow is illustrated. Left-hand models available). • Extends the life of transfer pumps by educting abrasive and corrosive chemicals downstream. • Bottle Rinse is included.

Applications: Low Flow Roller/Diaphragm Pump High Pressure - Low Flow

Cleanload #’s

3376-0870

On-Board Sprayer Pump: High Pressure - High Flow

Transfer Pump: Low Pressure - High Flow

3376-1170

3376-1670

Inlet Req’d Eduction Max. Outlet Req’d Eduction Max. Outlet Req’d Eduction Max. Outlet Pressure Flow Rate Pressure Flow Rate Pressure Flow Rate Pressure

PSI GPM GPM PSI GPM GPM PSI GPM GPM PSI

30 40 50 60 70 80 90 100

Snap-in attachment for remote loading of bulk chemical container.

16.1 31.5 5.2 33.5 52.2 9.2 73.5 61.2 16.9 19.1 47.0 6.6 38.0 64.4 12.3 82.9 67.2 22.4 21.4 54.5 8.1 41.3 72.6 15.3 90.3 68.3 27.8 23.3 61.5 9.7 44.4 77.7 18.2 96.2 66.8 33.1 24.9 68.0 11.2 47.5 80.5 21.1 101.3 65.1 38.4 26.4 74.1 12.7 50.9 82.1 23.9 - - 28.0 79.7 14.2 53.9 83.3 26.6 - - 29.7 84.8 15.8 56.6 85.0 29.3 - - -

Part No. HY 3376-0870 HY 3376-1170 HY 3376-1670 HY 3430-0823

Description Wt. Net Ea. CLEANLOAD™ High Pressure, Low Flow, Right Hand.... 40 lbs. $ 548.00 CLEANLOAD™ High Pressure, High Flow, Right Hand... 40 lbs. 539.00 CLEANLOAD™ Low Pressure, High Flow, Right Hand.... 40 lbs. 542.00 Suction Lance..................................................................................... 142.80

3430-0823 Suction Lance

3430-0823

Suction Lance

Part Number

Application

Description

Nozzle Size

HY 3376-0870 Low Flow Roller/Diaph. Pump High Pressure/Low Flow

08

HY 3376-1170

On-Board Sprayer Pump

High Pressure/High Flow

11

HY 3376-1670

Transfer Pump

Low Pressure/High Flow

16

Viton® is a registered trademark of DuPont Performance Elastomers

DULTMEIER SALES • OMAHA, NE

(800) 228-9666

www.dultmeier.com

• DAVENPORT, IA

(800) 553-6975

E0403


Poly & Septic Tanks

358

250 & 400 Gallon Utility Tanks — Slim Line Style —

D

Part No.

Slim Line StorageTank. Polyethylene Tank designed for narrow installations. Standard with polypropylene fitting with santoprene gasket and 16" vented lid. Built-in gallonage indicators are molded into each end of tank. Rated for products up to 1.70 specific gravity. Color is translucent (off-white). Gallons

RT SPO250UT RT SPO300UT RT SPO400UT

250 300 400

W x L x H

Fitting

62” x 29” x 42” 1-1/2” 62” x 29” x 53” 1-1/2” 62” x 29” x 66” 2”

Wt.

Net Ea.

Septic & Cistern Tanks Ace Tanks are stronger, easier to install and less costly than old-fashioned concrete septic tanks - yet they still offer the quality construction and safety you expect. Manufactured from high-density polyethylene with U.V. inhibitors, Ace Roto-Mold tanks utilize a horizontal flow designed for below ground installations up to 36 inches. Ace Roto-Mold Tanks are IAPMO approved and have passed strenuous stress tests. Each tank carries an individual serial code and is fully documented from date of manufacture. Features: Withstands up to 500 PSF load pressure • Exclusive deep rib design • Unique locking/gasket lid design • 1.7 S.G. Rating. Septic Tanks are designed and manufactured with rigorous quality controls to meet wastewater treatment system standards. The trapezoidal, deep rib design and exclusive interior divider system make these tanks the industry choice for strength and durability. The exclusive, custom-molded gasket system locks lids firm for a water-tight seal.

115 lbs. $ 367.70 159 lbs. 423.20 209 lbs. 617.00

Cistern Tanks are intended for bulk storage or collection of potable water. Tanks are manufactured from high-density polyethylene with U.V. inhibitors and feature the same heavy-duty rib design and locking lid system as septic tanks.

Polyethylene Double Wall Oil-Tainer® Tanks

AST1250

This Double Wall Tank is designed with 110% secondary containment and is designed for storing used motor oil. Constructed of linear polyethylene. Weather-resistant and 16” hinged, lockable manway (vented). Includes large “sink” with debris screen and removable debris strainer inside manway. Also includes exterior oil level monitoring gauge and overflow shutoff/indicator. 1-1/2” or 2” external quick-release coupling in top for pump out capability.

D

AST1450-1W D

Interior Divider Ace’s exclusive interior divider provides added strength, versatility and ease of installation. Slows wastewater flow and directs it to the middle of the tank where wastewater can separate from solids. (Only on two-compartment septic tanks.)

D

D

Part No.

Capacity

CU OT100 CU OT385

100 Gallon Double Wall Oil-Tainer® Tank ........... 35” D x 41” H 120 lbs. $ 959.00 385 Gallon Double Wall Oil-Tainer® Tank ........... 64” D x 42” H 180 lbs. 1743.00

Dimensions

Wt.

SEPTIC TANKS Part No. Capacity Wt./Lbs Dimensions Net Ea. RT AST750-1 750 Gallon, 1 Compartment 259 70” x 60” x 60” $ 649.00 RT AST1000-1 1000 Gallon, 1 Compartment 390 101” x 60” x 60” 880.00 RT AST1000-2 1000 Gallon, 2 Compartment 436 101” x 60” x 60” 1022.00 RT AST1250-1 1250 Gallon, 1 Compartment 443 58” x 118” x 72” 1036.00 RT AST1250-2 1250 Gallon, 2 Compartment 489 58” x 118” x 72” 1177.00 RT AST1500-1 1500 Gallon, 1 Compartment 528 58” x 137” x 72” 1221.00 RT AST1500-2 1500 Gallon, 2 Compartment 574 58” x 137” x 72” 1362.00 Other Sizes Available - Please Call Septic Tank Accessories Part No. Description Net Ea. RT AST19212 16” H x 24” Dia. Access Extension (Assembly - Black) $ 64.15 RT AST19211 * 24” Access Cover - Black......................................... 44.05 RT AST19257 8” Diameter x 24” H Riser & Lid - Black...................... 64.70 RT AST10078 4” Sanitary Gasket, for Sanitary Inlet/Outlet Pipes...... 5.84 RT AST10084 4” Schedule 40 Gasket, for Sch 40 Inlet/Outlet Pipes.. 5.57 * For Replacements; 24” Access Covers are Included with All Tanks.

Net Ea.

Cut-Away Applicator Tanks These Portable Tanks are for use on Tractors, Booms, etc. Slimline design. • Rated for 14 lb./Gal. Liquids • Medium Density Polyethylene • UV Inhibitor, Translucent • 8” Lids; 3/4” & 1-1/4” Fittings • Gallon Indicators D

TANKS Part No. RT CAW200 RT CAW250

Gallons 200 250

• Drainout Sumps Dimensions 24” x 55” x 46” 24” x 61” x 51”

CRADLES (Bands Included) Part No. Gallons Bands RT CAW200C 200 3X60; 3X40 RT CAW250C 250 3X72; 3X51

Wt. 80 lbs. 95 lbs.

Wt. 135 lbs. 143 lbs.

DULTMEIER SALES • OMAHA, NE

Net Ea. $ 283.90 324.80

Cistern Tank Accessories Part No. Description Wt. RT AST19214 16” H x 24” Dia. Access Extension (White) 35 lbs. RT AST19213 * 24” Ace Access Cover - White............. 14 lbs. RT AST19258 8” Diameter x 24” H Riser & Lid - White. 20 lbs. * 24” Access Covers Included.

Net Ea. $ 356.10 357.10

(800) 228-9666

CISTERN TANKS Part No. Capacity Wt./Lbs W x L x H Net Ea. RT AST850-1W 850 Gallon, 1 Compartment with 1 Access Cover....... 259 70 x 60” x 60” $ 651.00 RT AST1150-1W 1150 Gallon, 1 Compartment with 1 Access Cover....... 390 101” x 60” x 60” 932.00 RT AST1450-1W 1450 Gallon, 1 Compartment with 1 Access Cover....... 443 58” x 118” x 72” 1057.00 RT AST1700-1W 1750 Gallon, 1 Compartment with 1 Access Cover....... 528 58” x 137” x 72” 1248.00

www.dultmeier.com

• DAVENPORT, IA

(800) 553-6975

Net Ea. $ 81.50 66.95 82.20

E0710


Tank Lids • Liquid Level Controls TANK LIDS

359

Liquid Level Controls

Hypro PRO-CAP Tank Lids feature a Labyrinth Breather Design that offers a higher fill rate than others and a secure locking system. Made of Polypropylene material. Available as 8”, 12” and 16” twist lock lid and ring assemblies. Also available as 12” and 16” hinged lid and ring assemblies. Easily mounted on a flat surface.

Level Switches are designed to control liquid levels and open or close circuits for rising or falling levels of fluids. Power cords or lead wires are included and are shown with each model. All models can be used with relays if higher amp draws are required.

Twist Lock Labyrinth Lid & Ring 2A555

2A554

D D D

D

D

CFS2

RFSN-9 & 10 D D

2XC13

Model 2XC13 is designed for horizontal mounting. Polypropylene construction. 1/2” MPT dual threads allow for mounting inside or outside of vessel. Overall length is 3-1/2”. Rated to 176° F. and 116 PSI. 12” lead wires. Rated to .08 amps @ 240 volt (Can also be used on 110 volt and 208 volt). U.L. listed.

EPDM Gasket Part No.

HY TL08-0002 HY TL12-0002 HY TL16-0002 HY TLP-0007 HY TLP-0018 HY TLP-0023

Net Ea.

Model 2A554 is designed for vertical mounting. Polypropylene construction. 1/8” MPT thread. Length is 2-1/8” high x 1” wide. Rated to 220° F. and 110 PSI. 24” lead wires. Rated to .14 amps at 220 volt but can also be used on 110 volt. U.L. listed.

8” Twist Lock Lid & Ring Less Gasket....... $ 11.50 12” Twist Lock Lid & Ring Less Gasket..... 16.30 16” Twist Lock Lid & Ring Less Gasket..... 25.80 8” EPDM Gasket....................................... 5.20 12” EPDM Gasket..................................... 7.17 16” EPDM Gasket..................................... 9.88

Model 2A555 is designed for vertical mounting. 316SS construction. 1/8” MPT thread. Overall length is 2” high x 1” wide. Rated to 300° F. and 450 PSI. 18” lead wires. Rated to 1 amp at 200 volt. (Can be used on 110 volt). U.L. listed.

Hinged Labyrinth Lid, Ring & Gasket

Model CFS2 is a mechanically actuated floating switch. Polypropylene construction with 20’ PVC cord. Rated to 16 amp at 120 volt or 12 amp at 240 volt. Dimensions are 6-1/4” x 3-3/16”. Single-pull, double-throw design can be used for “on-rise” or “on-fall” applications. UL/CSA listed.

FEATURES • Lids Come Standard with a Locking Hasp • The 180° Hinged Design Allows the Lid to Open Completely for Easy Tank Access

Model RFSN-9 & RFSN-10 are switches designed for use with sump pumps. These are remote mount, floating switches. Designed for “on-rise” only. Rated to 13 amps at 115 volt and 140° F. Float diameter is 3”. RFSN-9 is standard with a 15’ cord. RSFN-10 has a 20’ cord.

D

Part No.

Part No. Construction AR 2XC13 Poly AR 2A554 Poly AR 2A555 316SS DR CFS2 Poly GJ RFSN-9 Poly GJ RFSN-10 Poly

Net Ea.

HY TL12-0006 12” Hinged Lid with Gasket....................... $ 22.50 HY TL16-0006 16” Hinged Lid with Gasket....................... 31.95

Female Threaded Lid FEATURES • Easily Replaces an Old or Lost Lid

for Water Break Tanks

• Universal Thread Fits Most Tanks

Part No.

HY TL06-0004 6” Threaded Lid with EPDM Gasket..........

Strainer Basket Filters - 18 Mesh -

D

Net Ea.

$ 5.19

KZ1

D

Part No. Part No.

DU KZ1 DU KZ2 KZ F2I66U

Net Ea.

HY 9950-08120 Basket Filter, 8” Diameter x 4.7” Deep...... $ 13.75 HY 9950-12240 Basket Filter, 12” Diameter x 9.4” Deep.... 19.15 HY 9950-16280 Basket Filter, 16” Diameter x 11” Deep..... 26.70

DULTMEIER SALES • OMAHA, NE

(800) 228-9666

Net Ea. $ 20.20 19.45 47.90 21.20 45.45 59.85

Level Controllers

• Spring Breather D

Wires/Cord 12” Lead Wires 24” Lead Wires 18” Lead Wires 20’ Cord 15’ Cord 20’ Cord

www.dultmeier.com

Level Controller includes a tethered float valve for water level control in a supply tank. The panel operates on 110-volt and utilizes 110/24 volt transformer, 6-ft. GFI power, relay, on/off switch and a 20-ft. cord on the float switch. The control box and float valve must be wired into a 24-volt polypropylene ball valve or butterfly valve which is priced separately. The unit is designed to maintain tank water level in a full condition, but prevent any overfill. Net Ea.

Water Level Controller for Tanks Outside Building.................. $ 446.00 Water Level Controller for Tanks Inside Building..................... 691.00 2”, 24 Volt Poly Valve, 4 second close. 547.00

• DAVENPORT, IA

(800) 553-6975

E1052


Tank Fittings

360

For Poly or Fiberglass Tanks Bottom Drain Bolted Fittings • Stainless Steel Bolts. • Glass Reinforced Polypropylene. • EPDM Gaskets Standard (Viton® available). • Fits most cone bottom & chemical inductor tanks, 30 gallons and larger. • Allows 100% Rinse Free - No Sediment Build Up. • Ultrasonically Sealed & 100% Fully Drainable.

D

BF300BD Part No. TK BF075BD TK BF100BD TK BF125BD TK BF150BD TK BF200BD TK BF300BD

Description Net Ea. Four Bolt, 1" in x 3/4" out, Threaded .... $ 36.20 Four Bolt, 1" in x 1" out, Threaded ....... 36.20 Four Bolt, 1" in x 1-1/4" out, Threaded.. 30.10 Four Bolt, 2" in x 1-1/2" out, Threaded . 34.40 Four Bolt, 2" in x 2" out, Threaded ...... 34.40 Six Bolt, 3" in x 3" out, Threaded ........ 53.45

Polypropylene Vent Cap/ Anti Vortex Fittings • 304 Stainless Steel Screen (Optional) Part No. TK VC230 TK VC200 TK VC330 TK VC300

Low Profile Very low profile design works great with many ICB's, stackable tanks, etc. Chemically resistant: polypropylene body, Viton® o-ring and 316 stainless spring. 2" MPT. Relieves vacuum starting at 0.5 psi. Good for flow rates to 50 GPM. Won't leak if tank tips over. (Not a pressure vent: vacuum relief only). Independently tested by Colorado Engineering. Part No. VK PVDV

with Stainless Bolts & EPDM Gaskets, Capped Bolt Heads Sealed with Viton® O-Rings

D

Size Net Ea. 1" in x 3/4" out...... $ 36.20 1" in x 1" out.......... 36.20 1" in x 1-1/4" out ... 60.20 2" in x 1-1/2" out ... 29.70 2" in x 2" out ......... 24.75 3" in x 3" out ......... 44.10

• S.S. Bolts • Glass Reinforced Polypropylene • EPDM Gaskets • Bolt Head Plugs Sealed Electronically Outlet x Inlet Net Ea. 1" Flange x 1" Female Thread................. $ 34.15 2" Std Port Flange x 2" Female Thread... 35.30 2" Full Port Flange x 2" Female Thread.. 46.60 3" Flange x 3" Female Thread................. 77.65

D

FEATURES: • 316 Stainless Steel • 1/2" Stainless Steel Bolts • Polyethylene Gasket D • Precision Tooling for Accuracy on Each Fitting D • Cross Linked Polyethylene Gasket Standard. EPDM or Viton® Available Pipe Part No. Description Size Net Ea. TK BFC100SS 1" Female NPT x 1" Female NPT.................. 1" $ 112.20 TK BFC125SS 1-1/4" Female NPT x 1-1/4" Female NPT.............. 1-1/4" 168.20 TK BFC150SS 1-1/2" Female NPT x 1-1/2" Female NPT...... 1-1/2" 131.90 TK BFC200SS 2" Female NPT x 2" Female NPT.................. 2" 149.70 TK BFC300SS 3" Female NPT x 3" Female NPT.................. 3" 326.50 TK BFC400SS 4" Female NPT x 4" Female NPT.................. 4" 454.80

Flange Gaskets

- For Banjo Poly Bolted Tank Fittings Description EPDM Gasket EPDM Gasket Viton® Gasket EPDM Gasket EPDM Gasket Viton® Gasket EPDM Gasket Viton® Gasket EPDM Gasket Viton® Gasket EPDM Gasket

Size 3/4", 1”, 1-1/4” 3/4", 1-1/2” 3/4", 1-1/4” 1-1/2", 2” 1-1/2" & 2" 1-1/2" & 2" 3" 3" 3” 4” 4”

Type Gasket Bolt Full Face Full Face Full Face Bolt Full Face Full Face Full Face Bolt Bolt Bolt

DULTMEIER SALES • OMAHA, NE

Net Ea. $ .95 2.44 82.50 5.73 1.85 20.05 14.60 89.55 3.88 137.40 23.60

(800) 228-9666

D

EPDM VITON® Part No. FPT Size Hole Size Gasket Gasket Net Ea. TK TF050 1/2" 1-5/8" 150G 150GV $ 6.20 TK TF075 3/4" 1-5/8" 150G 150GV 6.20 TK TF100 1" 2-1/4" 200G 200GV 7.37 TK TF125 1-1/4" 2-1/4" 200G 200GV 8.57 TK TF150 1-1/2" 3" 300G 300GV 13.20 TK TF200 2" 3" 300G 300GV 13.20 TK TF220 2" 3-1/4" TF220G TF220GV 16.15 TK TF300 3" 4-1/2" TF300G TF300GV 28.25 TK TF400 4” 5-3/4” - - 64.85 RT 10508 2", 3" Santoprene Gasket.............................. 7.09

Tank Fitting Gaskets

Stainless Steel Bolted Tank Flanges

Part No. TK BF100GRE TK BF100GE TK BF100GV TK BF200GE TK BF200GEP TK BF200GV TK BF300GEP TK BF300GV TK BF300GFE TK BFN400GV TK BFN400GE

Net Ea. $ 18.25

• Double Sided Threads • Standard with EPDM Gasket, Viton® Optional

Bolted Manifold Tank Flanges

Part No. TK MBF100 TK MBF200 TK MBF220 TK MBF300

Description 2" Vacuum Vent

Polypropylene Tank Fittings

– Threaded Flanges – Part No. TK BF075 TK BF100 TK BF125 TK BF150 TK BF200 TK BF300

Description Net Ea. 2" Vent Cap/Anti Vortex (with Screen)....... $ 12.75 2" Vent Cap/Anti Vortex (without Screen).. 11.25 3" Vent Cap/Anti Vortex (with Screen)....... 21.55 3" Vent Cap/Anti Vortex (without Screen).. 17.60

Polypropylene Vacuum Vent

D

Heavy Duty Polypropylene Tank Fittings

D

• Glass Reinforced Polypropylene

Part No. FC 150G TK 150GV FC 200G TK 200GV FC 300G TK 300GV TK TF220G TK TF220GV TK TF300G TK TF300GV TK TF400G TK TF400GV

Hole Size 1-5/8" 1-5/8" 2-1/4" 2-1/4" 3" 3" 3-1/4" 3-1/4" 4-1/2" 4-1/2" 5-3/4” 5-3/4”

Description EPDM Gasket Viton® Gasket EPDM Gasket Viton® Gasket EPDM Gasket Viton® Gasket EPDM Gasket Viton® Gasket EPDM Gasket Viton® Gasket EPDM Gasket Viton® Gasket

Net Ea. $ .70 4.68 .70 7.48 .90 9.82 3.88 33.45 6.26 29.60 73.55 62.15

Tank Fittings Stainless Steel • Double Sided Threads • Standard with EPDM Gaskets • Viton® Gaskets are available Outside Part No. Size Diameter Net Ea. TK TF075SS 3/4" 1-11/16” $ 98.80 TK TF100SS 1" 2-1/4" 120.30 TK TF125SS 1-1/4" 2-1/4" 120.30 TK TF150SS 1-1/2" 3" 151.00 TK TF200SS 2" 3" 151.00 TK TF220SS 2" 3-1/4" 200.40 TK TF300SS 3" 4-3/8" 244.30

D

Polypropylene Siphon Tubes Part No. Size Net Ea. TK ST200 2" $ 14.20 TK ST300 3" 20.95

D

Viton® is a registered trademark of DuPont Performance Elastomers

www.dultmeier.com

• DAVENPORT, IA

(800) 553-6975

E0400


Tank Fittings • Lids • Accessories

361

For Poly or Fiberglass Tanks

D

Polypropylene Bulkhead Fittings & O-Rings Standard with EPDM O-Rings - for Norwesco Poly Tanks -

Part No. RV 60405

FPT 2”

REQUIRED HOLE SIZE (I.D.): Description Fiberglass Double Thread 3-1/4”

Poly 3”

Net Ea. $ 5.75

Additional Norwesco Tank Fitting Components “O”-Rings for Polyethylene Tank fittings. RV 5437V Viton®, for 1/2", 3/4" & 1" FPT fittings........... $ 3.92 RV 67050 Viton®, for 1-1/4", 1-1/2" & 2" FPT fittings.... 6.93 DT 5453V “O”-Ring (Viton®) for 3" FPT fittings............. 34.05 Gaskets (Viton®) for Fiberglass Tank Fittings. RV 67031 For 1/2", 3/4" & 1" FPT fittings........................

Chemical Jug Rinse System Chem-Blade is a retrofit jug-splitting stainless knife system which opens chemical containers with speed and efficiency. Instead of operators using hand knives to remove caps and foil seals off containers, they simply bring the bottom of the jug down onto the blades splitting and emptying a 2.5 gallon jug in mere seconds. With water supplying the built in high pressure rotary rinse head, the containers are thoroughly rinsed leaving no chemical in the container, saving money as well as time. Testing showed an operator can spray 25 to 45 more acres per day with the time savings created by Chem-Blade. So, recouping the purchase investment is possible in just weeks depending on jug usage. Chem-Blade also empties bags of dry material fast with minimal effort. Designed to fit into any tank with a 16” lid diameter. Part No.

$ 10.50

Net Ea.

CB 0016 Chemical Blade System....................................... DU CB1 Internal Water Plumbing Kit for Chem-Blade *.....

$ 500.00 18.50

* Terminates with 3/4” Poly Tank Fitting

Fillwells, Covers & Accessories

Replacement Lids & Fittings for Ace Tanks

D D

Constructed of black polyethylene for durability. 5” & 7” Lids include one-way spring-loaded vent. 8”, 12”, 16” & 22” Lids include breather vent and fillwell ring.

5469R 62476

5479R

LD30-101 5” Lid with Spring Vent

D D

D

10528 5478R

16” Lid with Breather Vent

60019 Fits 60011 Lid D

ST10W

60011

Part No. Size Net Ea. DT 5479R 10" Fillwell..................................................................... $ 9.38 DT 5464R 16" Fillwell .................................................................... 5.79 RV 62476 5" Lid for Polytanks (New Style after 2001) ............... 5.18 DT 5478R 10" Lid, New style for Polytanks.................................... 14.25 RV 60011 16" Lid with 60019 4" Vent Cap ................................... 15.15 RV 60019 4" Vent Cap for 60011 Lid .......................................... 6.67 RT LD30-101 5” Lid with spring vent for spot sprayer tanks.............. 5.30 RV 63480 8” Lid with Snap-In Vent, After 2/2/2008..................... 7.70 DT ST10W - 14-Mesh Basket Strainer for 10" Fillwell................. 33.85 RV 60366 - Gasket for 5” Lid..................................................... 4.09 DT 5078R - Gasket for 10" Lid................................................... 3.07 RV 5449R 1'0” Poly Welding Rod .................................................. 1.77 RV 5469R 6" Threaded Lid with Vent for ARAG 12”,16” & 20” Lids.. 6.27

Polypropylene Anti Vortex Tank Flanges D

• Prevents Swirl in Bottom of Tank • Standard with FKM (Viton® Type)

Part No.

Anti-Vortex Flange

TK TF100AV TK TF125AV TK TF150AV TK TF200AV

1" Tank Flange ............ 2-1/4" $ 17.15 1-1/4" Tank Flange....... 2-1/4" 17.15 1-1/2" Tank Flange....... 3" 21.40 2" Tank Flange............. 3" 21.40

Hole Size

Net Ea.

Part No. RT LD30-101 RT 12414 RT 10525 RT 10526 RT 10527 RT 10528 RT 10530 RT 10520 RT 10529 RT 10508 RT 12528

D

Description Net Ea. 5” Lid with Spring Vent ......................... $ 5.30 7” Lid with Spring Vent.......................... 10.65 8” Lid with Breather Vent & Ring........... 13.00 12” Lid with Ring, Non Vented............... 16.70 12” Lid with Round Vent & Ring........... 18.35 16” Lid with Breather Vent & Ring......... 23.45 22” Lid with Breather Vent & Ring......... 78.30 Breather Vent Only for 8” & 12” Lids...... 2.73 Breather Vent Only for 16” & 22” Lids.... 6.26 2” Poly Bulkhead Fitting, Santo Gasket. 7.09 3” Poly Bulkhead Fitting, Santo Gasket. 26.90

Baffle Ball™ Tank Baffle System Baffle Balls™ excel at suppressing surges in mobile liquid tanks. Surge tests have demonstrated that the correct number of Baffle Balls™ in a liquid tank will significantly reduce liquid surge, even with an abrupt vehicle stop. Eliminating liquid surge effects improves safety, reduces vehicle drive train stress, D and provides longer tank life. 15-3/4" diameter balls will fit into 16" tank openings. Constructed of HighStrength Polyethylene (UV Stabilized). 1/8" thickness and structural ribbing provides high strength & durability. Holes shown so Liquid displacement in tank is only 1.5%. Two piece interlocking construction-will UPS. Quick installation. To calculate number of Baffle Balls™ required, Multiply 0.075 x Gallons in Tank. Note: Not recommended for agitating wettable powder solutions or for tanks requiring complete washout when switching chemical solutions (Fluid retention only 1.5 fluid ounces per ball). Part No. Diameter

SV 16

15-3/4"

Weight Per Ball

Per Ball Net Ea.

2 lbs.

$ 12.65

F.O.B. Factory

Viton® is a registered trademark of DuPont Performance Elastomers

DULTMEIER SALES • OMAHA, NE

(800) 228-9666

www.dultmeier.com

• DAVENPORT, IA

(800) 553-6975

E0399


362

Thermometers • Salimeters • Road Watch Pavement/Air Temperature Measuring System

“Minitemp” Series

Infrared Thermometer Indicates Surface Temperature Just Point, Shoot & Read the Temperature on the Large Backlit Display Some Typical Applications: AUTOMOTIVE: Troubleshoot engines including cooling sensors, thermostats, radiators, brakes, tires, ignition systems, etc. • ELECTRICAL: Check electrical panels for “hot” spots, D motors & bearings. • HVAC: Monitor supply & return registers, furnace performance, duct work & window insulation; Balance room temperatures & perform energy audits. • PAVEMENTS & FLOOR HEAT SYSTEMS: Check pavement temperatures and floor heat system effectiveness. Pocket sized, light & easy to use. Fast, rugged, reliable & accurate • 0˚ F. to 500˚ F. range • C˚/F˚ Selectable • 9 Volt battery • Economical • Low battery indicator • 3 digit backlight display • 7 second hold.

Spot Size @ 5’

Part No.

Description

RA RAYMT4U

IR Minitemp Thermometer (with Laser)........................ 10” $ 100.00

Warns You When The Road Ahead May Be Freezing! Road Watch Bullet™ should be a vital part of your anti-icing & de-icing program. It constantly displays both the air and pavement surface temperature in “real time”. This allows you to apply salt and chemicals at the best rates for the conditions and make your rate changes on the go. Uses non-contact infrared technology. “Caution” light activates at 35° F. Road temp range : -10° to 200° F. Air temperature range: -40° to 150° F. 12VDC. Illuminated LED digital display. Accuracy: 2° F. Includes exterior "western" mirror mount infrared sensor with clamp, 2" diameter in-cab display and 12' shielded cable. Many options available. Road Watch I I I® displays air temperature until the pavement temperature drops below 40° F., then shows pavement temperature & "Caution" display. Pavement temperature display range: +10° to +40° F. Accuracy: 1° F. In-Cab mount with pavement or air temperature, but not both.

Net Ea.

Visit Our Office in Omaha, Nebraska D

The RoadWatch LED Display

The RoadWatch Sensor easily mounts on any "western" mirror brackets. Mountings for other vehicle mirrors are also available.

Part No. Net Ea.

VE RWSS RoadWatch Bullet™ System.................................. $ 642.00 VE 849-0017-000 Pedestal Mount for Dashboard................... 83.35 VE 849-1242-000 RoadWatch Sensor with12’ Cable Less Display. 391.70

13808 Industrial Road • Omaha, NE 68137 1-800-228-9666 • 1-402-333-1444 • FAX: 1-402-333-5546

Visit Our Office in Davenport, Iowa

Specific Gravity Salimeters Salimeters for measuring the concentration of salt brine. Manufactured and calibrated in accordance with NIST Circular 555 and ASTM E100-81. Based on 60° F. liquid temperature. D

Salimeters for Salt Brine Solution Percentage Part No. Division Length Range Net Ea. FS 11605 1% 12" 0-100% Saturation $ 73.25 FS 11606 0.5% 12" 0-26.4% Salt 82.35

601 West 76th St. • Davenport, IA 52806 1-800-553-6975 • 1-563-386-0930 • FAX: 1-563-386-5448 e-mail: dultmeier@dultmeier.com • website: dultmeier.com

Service and Production Department

Dultmeier Sales engineers and builds a large variety of pumping systems, including “Custom Packages” to meet your unique needs. We build centrifugal, gear, diaphragm, fuel and DEF pumping systems. We also build Liquid De-Ice & turf / tree sprayers, chemical inductors, manifolds, load arm systems & more.

DULTMEIER SALES • OMAHA, NE

(800) 228-9666

www.dultmeier.com

• DAVENPORT, IA

(800) 553-6975

E0415


ULTRA-EASY CLEAN OUT

363

BPS3000 Brine Production System SYSTEM FEATURES:

FINA

L

• Cleans Completely in 10-15 Minutes: Self-contained hydraulic control system rotates the lower tank and trash screen, funneling all debris right into your front end loader bucket! No shoveling required! No need to remove your loader bucket like other systems require for cleanout!

A B LY! Prod rine Syst uction em t ha reall y ea t is clean sy to out!

• Large Capacity & High Volume Production: 6-1/4 Cu. Yd. Salt Hopper. Now with (2) water spray pipes in hopper. Heavy duty 10 gauge stainless steel. 3 HP Stainless Pump. Produces 4,000 to 6,000 Gallons Per Hour! • Versatile Plumbing: Made of 2” polypropylene and stainless fittings for excellent corrosion resistance. Pump to storage, recirculate to hopper from storage, add salinity adjustment water as needed.

D

D

Simple and Easy to Use: • No augers or conveyors required - just load salt into top of hopper with your front end loader. Then turn on your water supply & make brine! • One master control panel and hydraulic valve control all functions. Can be run in either automatic or manual mode. DU BPS3000-SS Brine Production System

• Portable skid frame; forklift into place quickly & easily. • 100% stainless steel construction. 3” x 3” x 3/16” frame and 10 gauge hopper. Patented

SPECIFICATIONS • SIZE: Height: 96”, Length: 132”, Width: 73” • SALT HOPPER CAPACITY: 6-1/4 cubic yards (level). • BRINE PUMP: Centrifugal stainless, 3 HP, 230V, 1 Phase. • HYDRAULIC SYSTEM: 1 HP, 208-230V, 1 Phase Pump with reservoir, control valve & pressure relief valve. • ELECTRICAL: 230V, 1 Phase, 30A Control Panel with 24V transformer and waterproof switches (3 Phase available).

System control panel includes lockout, 24 volt transformer and waterproof switches & illuminated indicator lights for improved safety and automatic or manual operation.

• EMPTY WEIGHT: Approximately. 3,600 lbs.

DULTMEIER SALES • OMAHA, NE

(800) 228-9666

www.dultmeier.com

• DAVENPORT, IA

Large 2" water inlet plumbing includes 24 volt automatic control valve, manual throttling valve & drain valve. Overflow protection also included.

(800) 553-6975

E0623


325 • 475 • 1065 • 1800 Gallon Self-Loading Anti-Ice/De-Ice/Dust Control Spray Systems

364

SYSTEM FEATURES: • Single 1065 Gallon Tank for 5 Ton Trucks. • Two 900 gallon “twin” tanks provides excellent baffle. (1800 Gallon System).

#DU 1A045 1800 Gallon

• Heavy-duty self-loading steel leg frame (Front legs rotate up as truck backs up to load unit; front wheels provide smooth roll-in). Can load and unload in 5 minutes.

#DU 1A054 1065 Gallon

• Extra-Tough Powder Coat Paint. • Independent telescoping rear legs for “bind-free” lifting by one person.

D

• Adjustable height stainless steel boom with high-flow flooding nozzles (spray 1, 2 or 3 lanes at once). Solid Stream nozzles also included for de-icing center lane.

1800 Gallon System Shown

• High flow hydraulic-drive pump; engine-drive pumps also available. • Raven DCS 400 Automatic Control System-complete with flow meter & control valve. Pre-programmable controller with up to six application rates. DCS410 also available. (GPS compatible). • Precise application rate: Gal/Lane-Mile; automatically maintains preset rate with speed changes. Can change rates or spraying 1, 2 or 3 lanes while driving. • “Blast” button for high volume spraying of bridge decks.

Call for System Pricing

• Polypropylene flanged fittings for simple maintenance. • Options available.

• Anti-Ice and Dust Control on Roads

• Right-Of-Way • Airport Ice Control

D

D

Call for Pricing Model DCS400

Raven DCS400 Automatic Programmable Rate Control System on these sprayers. Includes a 2" flowmeter, control valve and cables. (DCS410 also available).

3-Section Stainless Boom included on these sprayers include both solid stream and flooding nozzles for the center lane and solid state nozzles for spraying the left and right lanes with adjustable ball assemblies. (Other Options Available).

Self-Loading Anti-Ice/ De-Ice Sprayers 400 Series for Small Trucks & Pickups 450 Gallon Self-Loading Anti-ice/Deice Sprayers can be quickly and easily loaded and unloaded into standard 8' pickup beds by one person! No forklifts required! They include steel frames with a tough powder-coat paint finish, rotating front legs and telescoping rear legs. They also feature low profile tanks, 2" self-priming engine/Banjo pump, Raven SCS203 rate control system, Hannay manual hose reel with 150' of 1/2" high pressure hose, 17" adjustable pattern spray gun and a 1" dry steel boom or 1-1/4" stainless wet boom. A 1" digital inline meter is also included so you can see exactly how much deicing product you have used on each job. Great for private contractors and government agencies! Approximately 9'8" long, 59" wide and 42" high (450 gallon). Skid fits inside 48” pickup bed, overall tank width is 59”. 1-1/4" stainless boom includes 19 solid stream and 19 fan nozzles at 5-1/2" spacing with TeeJet "QuickJet" caps. Single and 3-Lane models. Part No. DU 1A401 DU 1A401A DU 1A401C-3

Description Wt. Net Ea. 450 Gallon Sprayer with PB80R Steel Boom.............. 875 lbs. $ 7152.00 450 Gallon Sprayer with 1-1/4" Stainless Boom......... 700 lbs. 7628.00 450 Gallon Sprayer with 1-1/4” SS Boom, 3 Lanes.... 875 lbs. 10351.00

DULTMEIER SALES • OMAHA, NE

(800) 228-9666

www.dultmeier.com

• DAVENPORT, IA

DU 1A401C-3

(3-Lane Sprayer)

(800) 553-6975

E0409


Versatile Skid Mount Sprayer Packages

365

for Anti-Ice/De-Ice & Weed Spraying SYSTEM FEATURES:

• The compact, heavy-duty welded steel skid frames are made to fit in tight spaces including pickup beds. • Powder coat paint finish on 200 & 300 gallon models for excellent durability & chemical resistance. • Skid-Mount Sprayers featuring Hypro 1537 centrifugal pump (1-1/2" x 1-1/4") close-coupled to a 5.5 HP Honda engine (80 GPM at 40 PSI; 30 GPM at 70 PSI). • 200, 300 or 500 gallon tanks with vented top lids & molded-in gallonage markers. (300 Gallon Tanks include stainless steel baffle). • Hannay 1500 Series manual hose reel with 300' of 1/2" 600 PSI hose and 17" adjustable spray gun (Hypro 3381-10). Great for winter anti-ice/deicing of sidewalks and other tight places, and for summer weed spraying.

D

• All necessar y plumbing including 2" drain-fill valve, 1-1/2" suction, bypass with relief valve & jet agitation system. • Includes DU PB80R spray boom standard with 12 brass solid stream nozzles (fan nozzles & stainless boom also available). Boom snaps into standard 2" receiver hitch.

DU 1A202 Skid Mount Spray Package with 200 Gallon Tank and PB80R Boom

• Complete control systems included. See below.

UNIT Length Width Height 200 Series 100 Gallon 45" 38" 48" Skid Mount Sprayer 200 Gallon 72” 34” 50” Dimensions: 300 Gallon 93” 34” 50” 500 Gallon 96” 40” 57”

DU 1A203 Skid Mount Spray Package with 200 Gallon Tank & PB80R Boom (see boom photo below) (Rate Control System not shown)

D

PB80R Boom included Includes Hitch Bracket

Part No.

Description Net Ea.

DU 1A202 DU 1A202A DU 1A202B DU 1A202C

202 Series Package Complete: Skid Mount Sprayer Complete with 200 Gallon Tank, Manual Hose Reel, PB80R 80" Boom Complete and * Raven SCS203 Rate Control System Complete. Wt. 450 lbs........................................................................................................................ $ 5686.00 Same as above with 300 Gallon Skid Mount Sprayer. Wt. 450 lbs................................................................ 5868.00 Same as above with 500 Gallon Skid Mount Sprayer (NOTE: 500 Gallon includes round tank with 4” dia.). Wt. 773 lbs.. 6752.00 "Space Saver" Version Same as above with 100 Gallon Skid Mount Sprayer. Wt. 375 lbs............................ 5369.00

DU 1A203 DU 1A203A DU 1A203B

203 Series Package Complete: Skid Mount Sprayer Complete with 200 Gallon tank, Manual Hose Reel, PB80R 80" Boom Complete and **Raven DCS 400 Automatic Rate Control System Complete with GPS speed sensor (ground speed oriented). Wt. 450 lbs.......................................... 8769.00 Same as above with 300 Gallon Skid Mount Sprayer. 500 lbs....................................................................... 8983.00 Same as above with 500 Gallon Skid Mount Sprayer. 950 lbs....................................................................... 10233.00

* This Rate Control System includes SCS203 console, 1" regulating valve and 1" full port boom on/off valve. ** Raven Automatic Rate Control System includes DCS 400 console, 1-1/2" flow meter, 1-1/2" regulating valve & 1" full port on/off valve & GPS speed sensor.

Many Options Available - Other booms also available - see adjacent pages. Note: For Anti-ice/De-ice spraying, 200 Series Systems will cover one lane at up to 50 Gallons Per Lane-Mile at 30 MPH or up to 30 Gallons per Lane Mile at 50 MPH.

DULTMEIER SALES • OMAHA, NE

(800) 228-9666

www.dultmeier.com

• DAVENPORT, IA

(800) 553-6975

E0410


Booms for Anti-Ice/De-Ice & Right-Of-Way/Turf Spraying

366

80" Boom System for Receiver Hitches PB80R

DU PB80R: 80” long steel boom; locks into standard 2" pickup receiver hitch. Adjustable height (8"). Use twelve solid stream brass nozzles for effective anti-ice/de-ice spraying (8-1/2" spacing). Double “swivel” nozzle assembly each side for wider coverage (approximately 9-10’). Includes 1” hose with polypropylene camlock for quick plumbing hookup to skid sprayers. 1" Adjustable check valve included. Fan nozzles also available. For single lane spraying. Also available in stainless steel (DU PB80R-SS). Part No.

Material

Net Ea.

D

Includes Hitch Bracket

DU PB80R Steel $ 508.00 DU PB80R-SS S.S. 593.00

1-1/4" Stainless Boom System 1-1/4BOOM: 72" x 1-1/4" 304 Stainless Boom for Anti-ice/De-ice & Dust Control Spraying. Boom includes 1-1/4" stainless tee in center and 1-1/4" stainless elbow each end (vertical stainless side pipes are extra). Stainless plug inside elbow each end allows for 1, 2 or 3 lane spraying (liquid inside center portion of boom does not flow into outside side pipe sections). Includes 13-1/4" stainless couplings along bottom of boom for insertion of nozzles at 8 1/2" spacing. Also includes 1" stainless couplings mounted on top of boom for insertion of flooding nozzles. Nozzles and fittings shown for boom are sold separately.

D

DU 1A062B-1: Plumbing kit for 1-1/4 BOOM. Includes two high flow flooding nozzles and 19 solid stream nozzles with quickjet bodies and caps for anti-icing and deicing center lane, stainless vertical pipes shown with 12 high flow solid stream nozzles and adjustable ball assemblies for anti-icing left and right lanes, 1-1/2" 3-way valve, (3) check valves, miscellaneous stainless and polypropylene fittings and (2) stainless cushion clamps. Note: 1-1/4" Main hoses shown are sold separately. Other variations available.

Shown with Optional Stand

Part No. Net Ea. DU 1-1/4BOOM $ 462.00 DU 1A062B-1 1535.00 DU 1B002AK 282.00

DU 1B002AK: Steel attachment bracket kit for boom. Holds boom firmly inside standard 2" receiver hitch (not shown). Also allows for vertical boom adjustment (not shown). Includes SS clamps.

Anti-Ice/Deice Boom

Adjustable Right-of-Way Spray Boom

with Camlock Extensions

Versatile Schedule 80 PVC Boom is 8’ long with two 2’ camlock extensions (one each side) so you can spray 8’ or 12’ widths whenever desired. Includes a steel boom support bracket which snaps into a standard 2” receiver hitch. Boom includes two sets of quick change nozzles for effective anti-icing & deicing. 15 twin strip solid stream nozzles are provided for “strip” anti-icing & deicing. These nozzles snap into 15 poly camlock couplers (3/4”) spaced along the boom bottom at 10” centers to provide a solid stream “strip” pattern at approximately 5” spacing. Also includes seven 95° brass fan nozzles with camlock adaptors to quickly snap into boom at 20” spacing along with 8 camlock plugs. 6’ of 1” hose with 1” poly shank coupler also included for quick hookup to sprayers. Part No.

Net Ea.

DU PB-PVC2

8' PVC Boom with Camlock Extensions & Nozzles.......... $ 989.00

DULTMEIER SALES • OMAHA, NE

(800) 228-9666

Right-Of-Way Spray Boom mounts to the front or rear of trucks for spraying right-ofway, ditches, fence rows, etc. up to 20’ from the side of the D roadway. Includes an electric cylinder to rotate the main boom arm through a wide range for different widths and changes in terrain such as banks or ditches. Toggle switch & cable included so the operator can rotate the boom angle from the cab of the truck. Also includes vertical and horizontal adjustment features and frame mounting brackets. Main boom arm receives standard 1” vari-space square boom clamp. Boom with plumbing kit includes one Hypro XT043 boomless nozzle, double brass swivel, misc. fittings & 30’ of 3/4” hose with 3/4” poly coupler. Boom & plumbing ship unassembled. Guard rail spray boom also available. Part No.

DU EBB DU EB1

Bare Boom Complete (No Plumbing)................ Call for Boom Complete with Plumbing Kit.................... Pricing

www.dultmeier.com

• DAVENPORT, IA

(800) 553-6975

E0413


Deicing Controls DCS 400 & 410 De-Ice Spray Control Systems

367

Complete “Pressure Read” Spray Control System

Provides 3-Section Liquid Spray Bar Control, or Granular Spreader Control • Anti-Ice and Dust Control on Roads • Right-Of-Way • Airport Ice Control D

DU 1A030: Complete “pressure read” spray control system. Includes controller with 100 PSI dry pressure gauge, “Master” 3 boom on/off switches and pressure adjust switch. 3/4” control valve and one 1” boom on/off valve. 14’ cable harness with 12’ extensions. . Larger control valves available.

D

Part No.

Model DCS400

DCS 400 is designed to accurately control the application rate of liquid de-icing agents to all types of pavements, runways, bridge decks, etc. The system can also be used for controlling the application rate of liquid dust control or for granular spreader control. Up to six different application rates can be programmed into the DCS 400.The application rate dial can then be set to any one of the six pre-programmed rates for rapid rate control changes. A manual switch on the console allows the operator to override the pre-programmed application rate by increasing or decreasing the rate at any time. The DCS 400 features a "Blast" button which, when pressed, sends a higher rate blast for as long as the operator holds the button. Also, a timed blast can be added to the blast cycle once the blast button is released. This gives the operator both manual and timed blast capability. Rates can be displayed in either gallons per lane mile or gallons per thousand square feet.

DU 1A030

Net Ea.

Complete "Pressure Read" Spray Control System.......... $ 1012.00

Other DCS De-Ice Control System Components Flow Meters: Turbine Type, .3 to 400 GPM ranges, rated 90 to 300 PSI Valves: 1/4" to 3" ball or butterfly type, polypropylene or stainless steel material, rated 150 to 300 PSI. Hydraulic Valves: 3 to 30 GPM hydraulic valves; adjustable and fast acting. Speed Sensors: Speedometer, radar, and magnetic drive shaft available. Granular Encoders: 50 RPM or 250 RPM maximum shaft speeds.

D

Model DCS410

DCS410 is an enhanced version of the DCS400. It includes all the features of the 400 plus many others such as GPS/data logging capability, backlit switch panel, 3 display screens, tank low alarm, tank low shut-off, 10 application rates, minimum flow rate setting, adjustable off-rate alarm, zero speed valve shut-off, independent pump loading capability, temperature sensor, two speed gear ratio and removable calibration key. The DCS410 will also work with proportional pulse width modulated valves made by Raven and other valve manufacturers. Also handles high & low flow booms (2 Tiers).

Part No. RV DCS400 RV DCS410 RV 115-0159-955 RV 115-0159-971 RV 115-0159-957 RV 063-0173-163 RV 843HYD RV 063-0172-177 RV RFM100 RV 115-0159-953

Description Net Ea. DCS 400 Control Console........................................... $ 1592.00 DCS 410 Control Console .......................................... 2036.00 10' Product Cable with Weatherpack Connectors ...... 310.00 31' Console Cable with Weatherpack Connectors (Use with DCS400) .................................................... 303.00 31' Console Cable with Weatherpack Connectors 0-30 GPM, use with DCS410...................................... 623.00 Hydraulic Fast Regulating Valve, 0-16 GPM (Use with DCS400)..................................................... 525.00 Pulse Width Modulated Hydraulic Regulating Valve (Use with DCS410)..................................................... 631.00 666.00 2" S.S. Regulating Valve (Use with Engine-Drive Pumps). RFM 100 Flow Meter - 2" NPT/Flng............................ 667.00 World Allison Interface................................................ 47.60

FOR GRANULAR SYSTEM USE: RV 063-0171-071 Encoder (180 CPR), 50 RPM Max. (Replaces Flow Meter)................................................ RV 063-0173-164 30 GPM Fast Hydraulic Valve (Replaces 2" S.S. Control Valve).................................

DULTMEIER SALES • OMAHA, NE

284.40

Call for System Details !

527.00

(800) 228-9666

www.dultmeier.com

• DAVENPORT, IA

(800) 553-6975

E0414


Spreaders

368

When You Want the Best Use SnowEx® ! SnowEx® products are the ideal choice for spreading salt and ice melt products for winter maintenance control. Heavy-duty polyethylene hoppers and powder-coated frames protect against corrosion. Powered by 12-volt electric motors. Variable speed controllers. Simple design does not use sprockets, gears or belts. When you want the best, use SnowEx®.

Utility Spreaders

Tailgate Spreaders Heavy-Duty Tailgate Spreaders for deice applications. Ideal for the private operator or commercial contractor for de-icing parking lots, driveways, recreational paths or roads. Easily mounts to Pickups, SUV’s, Tractors or Utility Vehicles.

Utility Spreaders are the ideal choice for use with SUV’s, Utility Vehicles, Tractors and Small Pickups. Standard with 2” receiver. Can be used for bagged rock salt or pelletized materials as noted. Optional ground drive or 3-Point mounting kits are also available. SR110 and SR210 models feature wireless on/off control. Capacity is 3 cu. ft. (240 lbs.). 2” Receiver. Spreads up to 25’. SR110 is designed for flowable ice melters. The SR210 features a high-flow auger and is for bagged rock salt. Spreads up to 25’.

SP325 Junior Tailgate spreader is rated to 3.25 cu. ft. (260 lb.) capacity. Designed to spread bagged rock salt or calcium flake.Variable speed, manual controller. 2” Receiver mount. Spreading width up to 25’. SP575 Mini-Pro spreader is rated to 5.75 cu. ft. (460 lb.) capacity. 2” Receiver mount is standard. SP1075 Pivot Pro spreader is rated to 10.75 cu. ft. (860 lb.) capacity. 2” Receiver mount (RHT380) or 2” pivot mount (PMT175) must be ordered separately. Both the SP575 and SP1075 units are designed to spread bagged ice melt and bagged rock salt as standard, (bulk salt calcium flake and calcium chloride pellets can be spread with TRK Control Tube option). Variable speed, digital controller. Spreading width up to 40’. SP125 features electric on/off spinner switch with manual gate control cable. 3 Cu. ft. capacity (240 lbs.) with up to 20’ spreading width. Designed for pelletized ice melt products. 2” Receiver. SP1575

D

SP1575 Bulk Pro spreader is rated to 5.25 cu. ft. (420 lb.) capacity. Includes 2’ receiver, 3-point mount. Transverse auger transmission, vibrator and dual variable speed, digital controller with wiring harness. SP1875 Bulk Pro spreader is rated to 9 cu. ft. (720 lb.) capacity. 2” Receiver (RHT380/RHT085) or 2” pivot (PMT175) must be ordered separately.

Both the SP1575 and SP1875 units are designed to spread bagged rock salt and bulk salt as standard and can be adapted for bagged ice melt, 50/50 sand/ salt mix, calcium flake, calcium chloride pellets and dry free flowing sand, (optional items required).

SP225 features a high flow auger and electric on/ off spinner switch. 3 Cu. ft. capacity (240 lbs.) with up to 25’ spreading width. Designed for bagged rock salt and calcium flake. 2” Receiver.

D

SP100 features an electric gate and variable speed controller. 3 Cu. ft. capacity (240 lbs.) with up to 20’ spread width. Designed for pelletized ice melt products. 2” Receiver.

SP100 Part No. Capacity Wt. Net Ea. TZ SR110 Utility Spreader, Wireless............ 3 cu. ft. 68 lbs. $ 581.00 TZ SR210 Utility Spreader, Wireless............ 3 cu. ft. 68 lbs. 747.00 TZ SP125 Utility Spreader, Manual Gate..... 3 cu. ft. 65 lbs. 682.00 TZ SP225 Utility Spreader........................... 3 cu. ft. 68 lbs. 692.00 TZ SP100 Utility Spreader, Variable Control 3 cu. ft. 75 lbs. 1409.00

Part No. Capacity Wt. Net Ea. TZ SP325 Tailgate Spreader 3.25 cu. ft. 79 lbs. $ 1202.00 TZ SP575 Tailgate Spreader 5.75 cu. ft. 106 lbs. 1642.00 TZ SP1075 Tailgate Spreader * 10.75 cu. ft. 141 lbs. 1858.00 TZ SP1575 Tailgate Spreader 5.25 cu. ft. 160 lbs. 2778.00 TZ SP1875 Tailgate Spreader * 9 cu. ft. 180 lbs. 2980.00 TZ RHT380 2’ Receiver Mount.............................................. 423.20 TZ PMT175 Pivot Mount........................................................ 487.90 TZ RHT085 1875 Hitch Kit for RHT380................................. 166.70 * Requires Mounting Kit Option as Noted Above.

DULTMEIER SALES • OMAHA, NE

(800) 228-9666

www.dultmeier.com

• DAVENPORT, IA

(800) 553-6975

E0830


De-Ice Spreaders & Systems

369

In-Bed Deice Spreaders V-Maxx and V-Pro In-Bed Spreaders are designed for Pickups, Flatbeds or Dump Trucks for spreading bagged ice melt, bulk salt and sand mixtures. 12-Volt, variable-speed, digital in-cab controls. Heavy-duty augers with product vibrators. Fitted tarp, bolt down kit and top screen. Powder coated frames and polyethylene tanks for added corrosionresistance. All units require wiring from vehicle battery to cab control.

SP3000 1/2 cubic yard (1080 lbs.) and SP6000 1 cubic yard (2160 lbs.) models will handle bagged rock salt and bulk salt as is. Can also apply bagged ice melters, calcium flake and calcium chloride pellets with TRK material control tube. Free flowing sand and sand/salt mix can be used with Pre-Wet System adder. Floor bed dimensions are 58” L X 34” W (SP3000) AND 44” W (SP6000). Overall length is 77” L and 48”. Spreading width up to 40’.

Liquid Deice Systems AccuSpray Liquid Deicing Sprayers are quiet and easy to maintain. Perfect for parking lots, sidewalks and residential applications. 12-Volt pump and cab-mounted controller. Skid mount, powder coated frames and polyethylene tanks with baffles are standard features. Designed to apply salt brine, calcium chloride brine and branded liquid products. VSS2000 (200 gallon) and VSS3000 (300 gallon) units are designed for 1/2 ton and larger pickups, dump trucks or flatbeds. Multi-zone, cab controller allows for 3 separate spray zones including curb spray nozzles. Hose kit is not included but is an optional add on. Five nozzle boom with additional curb spray nozzle on boom ends. Floor dimensions are 80” L x 39”W x 68” H.Spraying width up to 25’. Capacity is 20 gallon per lane mile at 10 mph.

SP7550 1.5 cubic yard (3420 lbs.) capacity. Will handle bulk salt as is and bagged rock salt with FFK020 flow kit. Can also apply 50/50 sand/salt mix and free flowing sand with Pre-Wet System adder. Floor bed dimensions are 66” L x 44” W. Overall length is 89-1/2” x 49’ wide. Spreading width up to 40’.

VSS1000 is designed for utility vehicles or compact pickups. 100 Gallon capacity. Standard with hose reel, spray wand and 50’ of hose in addition to 3 nozzle boom for confined areas and stairways. Floor dimensions are 45” L x 32” W x 50” H. Spraying width is 6’. Capacity is 20 gallons per acre at 10 mph. Pump on/off switch with molded plug.

Part No. Capacity Wt. Net Ea. TZ SP3000 In-Bed Spreader ............. 1/2 cu. yard 386 lbs. $ 4136.00 TZ SP6000 In-Bed Spreader.............. 1 cu. yard 416 lbs. 4535.00 TZ SP7550 In-Bed Spreader.............. 1-1/2 cu. yard 550 lbs. 5631.00

Part No. Capacity Wt. Net Ea. TZ VSS1000 Liquid Deice Unit ................ 100 Gallon 172 lbs. $ 2500.00 TZ VSS2000 Liquid Deice Unit................. 200 Gallon 450 lbs. 5000.00 TZ VSS3000 Liquid Deice Unit................. 300 Gallon 520 lbs. 5449.00

Material Storage Bins Water-Resistant Storage Bins for salt, sand or fertilizer. Heavy-duty, polyethylene construction. Designed for handy storage and easy access. Hinged and lockable lid is standard. Three sizes to choose from. Includes heavy-duty poly scoop.

D

SB1100

DULTMEIER SALES • OMAHA, NE

Part No. Capacity Length Width TZ SB550 500 lbs. 34” 24” TZ SB1100 1000 lbs. 42” 29” TZ SB1800 1750 lbs. 48” 33”

(800) 228-9666

www.dultmeier.com

• DAVENPORT, IA

Height. 24” 30” 34”

Depth 20” 27” 32”

(800) 553-6975

Net Ea. $ 237.40 302.00 392.90

E1078


Spreaders

370

Sidewalk Spreaders Walk Behind Spreaders Walk Behind Spreaders for applying ice melt products for sidewalks and driveways. Available in Granular Broadcast, Granular Drop or Liquid models. Polyethylene hoppers and powder coated or stainless frames for added corrosion resistance.

SD95

SP65 Broadcast Spreader is designed for bagged rock salt and calcium chloride products. Rated to 100 lb. capacity. Powder coated frame. Up to 25’ spread width. D

SP85SS Broadcast Spreader

SD1400 Drop Pro Spreader is rated to 14 cu. ft. (1120 lbs.) capacity. Standard with 3-point mounting frame.

Broadcast Spreaders Part No. TZ SP65 TZ SP85 TZ SP85SS

Frame Powder Coat Powder Coat Stainless

Capacity 100 lbs. 160 lbs. 160 lbs.

Wt. 25 lbs. 42 lbs. 42 lbs.

Net Ea. $ 267.70 433.30 472.70

Powder Coated Frame

D

SD95 Drop Spreader SP1675 Sidewalk Spreader

Drop Spreaders Part No. TZ SD95 TZ SD95SS

Frame Powder Coat Stainless

Capacity 160 lbs. 160 lbs.

SL80 Liquid Walk Behind Unit. Rated to 1 GPM flow and 12 gallon capacity. 12-Volt rechargeable electric pump. Adjustable boomless nozzle and spray wand allow for optimal coverage. Powder coated or stainless frame. Up to 48” spray coverage.

Wt. 55 lbs. 55 lbs.

D

SD1400 Sidewalk Spreader

Part No. Capacity Wt. Net Ea. TZ SD600 Sidewalk Spreader *................ 6 cu. ft. 175 lbs. $ 3227.00 TZ SD1400 Sidewalk Spreader................... 14 cu. ft. 375 lbs. 4116.00 TZ TPR020 2” Receiver Mount........................................................ 261.60 TZ TPD020 Utility Mount................................................................. 179.80 * Requires Mounting Kit as Noted Above.

SD95 Drop Style Spreader is designed for bagged rock salt and bagged ice melt products. Narrow 28” coverage is ideal for sidewalks and areas where overthrow is not desired. Powder coated or stainless frames.

D

SD600

SD600 Drop Pro Spreader is rated to 6 cu. ft. (480 lb.) capacity. TPR020 2” receiver mount or TPD020 utility bed mount must be ordered separately.

SS Frame

SP85 Broadcast Spreader is designed for bagged rock salt and calcium chloride products. Rated to 160 lb. capacity. Powder coated or stainless steel frames. Up to 25’ spread width.

Sidewalk Spreaders are d e s i g n e d fo r s i d ewa l k s, driveways, parking structures and many other deicing applications. Capable of spreading almost any type of rock salt, ice melters and sand/ salt mixes. Straight down drop design for control of coverage on SD Models and variable rotary coverage on SP1675. Gatefree material disbursement, polyethylene hopper, 12-volt sealed transmission, variable speed, digital controller.

Net Ea. $ 601.00 636.00

SD1675 Precision Pro is a rotary sidewalk spreader with coverage from 4’ to 12’. This adjustable spread pattern allows for narrow coverage like walks to wider coverage like roadways. Capacity is 6 cu. ft. (480 lbs.). Features vibrating material flow facilitator. *Note: 3-Point mount is standard. 2” Receiver (TPR020) or utility bed mount (UBM175) must be ordered separately as required.

Part No. Capacity Wt. Net Ea. TZ SP1675 Sidewalk Spreader *................ 6 cu. ft. 290 lbs. $ 3379.00 TZ TPR020 2” Receiver Mount........................................................ 261.60 TZ UBM175 Utility Mount................................................................. 229.30 * Requires Mounting Kit as Noted Above.

SL80 Liquid Walk Behind

To Deliver the Best Possible Service to Our Customers,

D

Dultmeier Sales Strives to Live Up to A Set of Core Values,

Liquid Walk Behind Part No. TZ SL80 TZ SL80SS

Frame Powder Coat Stainless

Capacity 12 Gallon 12 Gallon

Wt. 60 lbs. 60 lbs.

DULTMEIER SALES • OMAHA, NE

One of Which is to Be

Net Ea. $ 692.00 718.00

(800) 228-9666

“Customer Focused” •

www.dultmeier.com

• DAVENPORT, IA

Partnering to meet and exceed customer expectations

(800) 553-6975

E0922


Spreaders & Sprayers

371

Turf-Ex® Walk Behind Spreaders and Sprayers High quality, walk behind push spreaders from TurfEx®. Broadcast and Drop style models for granular products such as fertilizers, pesticides, seeds and herbicides. Liquid Push sprayers with 12-volt pumps for liquid applications. Durable polyethylene hoppers, material flow adjustment, fitted hopper cover and powder coated frames are standard on all models. Commercial Grade Models are designed for light duty commercial and residential use. Professional Grade Models are designed for everyday us by turfcare operators. (Stainless frames are also available for most models). TS25 (50 lb. capacity) and TS45 (100 lb. capacity) are commercial Broadcast spreaders. Spread width up to 12’. Rubber inflatable tires. Powder coated frames. TS65 (75 lb. capacity) and TS85 (120 lb. capacity) are professional Broadcast spreaders. Spread width up to 12’. Gusseted, powder coated frames and large pneumatic tires are standard. TS95 (120 lb. capacity) is a professional grade Drop Style spreader. Allows direct placement of granular product to specific areas. Spread width is 28”.

D

TS85

TS95

TS45

TS65

TS25 D

D

TL80

Part No. Capacity TZ TS25 Commercial Broadcast Spreader.... 50 lbs. TZ TS45 Commercial Broadcast Spreader.... 100 lbs. TZ TS65 Professional Broadcast Spreader.... 75 lbs. TZ TS85 Professional Broadcast Spreader.... 120 lbs. TZ TS95 Professional Drop Spreader............ 120 lbs. TZ TL80 Liquid Push Sprayer........................ 12 Gallon

DULTMEIER SALES • OMAHA, NE

(800) 228-9666

Wt. 20 lbs. 21 lbs. 25 lbs. 42 lbs. 55 lbs. 60 lbs.

Net Ea. $ 149.50 176.80 302.00 399.00 504.00 595.00

www.dultmeier.com

TL80 is a Liquid Sprayer that features a 12-volt rechargeable pump that sprays up to a 96” pattern. Spot spraying can also be done with the handy adjustable spray wand and 8’ hose. Rated to 120 gallons per battery charge. 12 Gallon tank. 6’ to 8’ Spray coverage with adjustable nozzle.

• DAVENPORT, IA

(800) 553-6975

E0828


Bulk Spreaders

372

Turf-Ex® Bulk Spreaders Receiver Mount, Skid Mount and Ground Driven / Pull Behind Spreaders from TurfEx®. Heavy-duty polyethylene hoppers and powder coated frames. The ideal choice for large or small spreading of fertilizers, herbicides, pesticides and seed products. All units include fitted hopper covers to protect against the weather.

Equipment Mounted Spreaders TS300 and TS300EG are equipment mounted spreaders with 3 cubic ft. (240 lb.) capacity. Designed to be used with utility vehicles. 2” Receiver hitch is included. Spreading width to 20’. TS300 has a 10’ cable to manually open and close the flow gate. TS300EG has an electrical flow gate and variable speed controller for easy on/off and application rate change.

Part No. Capacity TZ TS300 Spreader, Manual Control........... 3 Cubic Ft. TZ TS300EG Spreader, Electric Control........... 3 Cubic Ft.

Wt. 65 lbs. 75 lbs.

Net Ea. $ 838.00 1258.00

Skid Mounted Spreader

MS2000 is a skid mounted spreader. Designed to mount in the bed of utility vehicles or work trucks. Auger system allows for handling of all types of spreading materials, even topdressing of sand. Electric powered with variable speed digital controller for precise application. Product vibrator is also included. Capacity is 11 cubic ft (880 lbs.). Spreading widths to 30’. Dimensions are 64” L x 48” W x 27” H.

Part No. Capacity Wt. Net Ea. TZ MS2000 Skid Mount Spreader..... 11 Cubic Ft. 280 lbs. $ 3937.00

Ground Driven Spreaders TS1200GR

D

TS1200GR and MS4500 are Ground Driven Spreaders. Versatile hitch system allows these models to be pulled by utility vehicles or small tractors and secured with standard hitch pins. Rated up to 30’ spreading widths. TS1200GR features a 10’ cable to manually control flow gate. 12 cubic ft. (960 lbs.) capacity. MS4500 includes auger feed system, automated flow gate, variable speed digital controller and adjustable spinner for precise application. Product vibrator is also included. Capacity is 1.4 cubic yards (3000 lbs.).

Part No. Capacity TZ TS1200GR Ground Drive Spreader............ 12 Cubic Ft. TZ MS4500 Ground Drive Spreader............ 1.4 Cubic Yd.

Wt. Net Ea. 180 lbs. $ 2624.00 955 lbs. 8676.00

D

MS4500 DULTMEIER SALES • OMAHA, NE

(800) 228-9666

www.dultmeier.com

• DAVENPORT, IA

(800) 553-6975

E1080


Seeders & Spreaders COMMERCIAL SPREADERS

373

that deliver Superior Performance, Low Maintenance and Long Life.

All Push Spreaders Feature:

Model 2170

• Pneumatic Wheels / Poly Rims 2-YEAR WARRANTY • Stainless Steel Axles with Nylon Bearings & Gears • 3-Position Handles on Push Style • Flow Control with Infinite Settings & Positive Linkage • Red molded hi-impact poly Hoppers. Note: Self-Propelled Models, Optional Side Deflectors & Rain Covers are also available. Model 2150

An economical push spreader with stud tread tires

Model C24HDS Has S.S. Chassis with ball bearing axle support. Features shut-off plate with right & left adjustable side throwing holes that allow pattern adjustments based on material density or size of area to be covered.

D

D

D

an economical but rugged push spreader D

D

Model S25 Spray-Pro Ground driven pump & high speed gearbox - no battery or motor to maintain. Heavy-duty epoxy coated Diamond chassis. Diaphragm check valve and replaceable nozzle (3 are included for fine, medium and coarse sprays). Two mode valve for Spray or Transport settings while the pump circulates the liquid. D Optional hand operated spray gun for spot treatments.

D

Model C24HD An economical push spreader with large capacity, ergonomic adjustable handle and jumbo turf tires

Part No. AI 2150 AI 2170 AI 2170T AI C24HD AI C24HDS AI C25HD AI S25

Model C25HD with heavy duty frame adjustable height hitch

Model 2170T A tow version of the 2170

Type Capacity Pneumatic Wheels Frame Wt. Net Ea. Hand Push 50 lbs. 13x4.00 Stud Tread Painted Tube Steel 26 lbs. $ 178.10 Hand Push 100 lbs. 13x4.00 Stud Tread Painted Tube Steel 29 lbs. 207.10 Tow Style 100 lbs. 13x4.00 Stud Tread Painted Tube Steel 28 lbs. 207.10 Hand Push 100 lbs. 13x5.00 Turf Tread H.D. Painted Tube Steel 33 lbs. 347.20 Hand Push 100 lbs. 13x5.00 Turf Tread Stainless Steel 33 lbs. 481.80 Tow Style 100 lbs. 13x5.00 Turf Tread H.D. Painted Tube Steel 31 lbs. 422.00 6.6 gallon capacity, 36”-72” Spray width & 13” Pneumatic stud type wheels .............. 440.30

12-Volt Broadcast Spreader D

CSP-1094

Model M40 — Solenoid Activated

PTO Driven Power Seeders PTO Drive Seeder/Spreaders are built for the farmer who requires a quality, economical broadcast seeder/ spreader. It easily handles grass seed, wheat, or fertilizer, producing a uniform spread pattern. The feature-enhanced spreaders are easy to maintain, providing longer life and low maintenance. Available in 3, 6 or 10 bushel capacity and an optional poly hopper in the ten bushel model.

Features: Choice of larger hopper capacities • Easy shift lever for spread direction selection • Cone shaped hopper for easy material flow • Bottom seed gate for controlled spread pattern • PTO driveline • Heavy duty gearbox • Adjustable spinner fins • Tubular steel main frame • Fits large Cat. 0 and Cat. 1 three-point hitches • Optional fertilizer rotating rod and wheel agitator.

• High Volume 3,350 cu. in., 150 lb. Load Bearing Capacity. • Easy Vertical or Horizontal Mount System without additional brackets. • Sealed Heavy-Duty Torque 12 Volt Motor located in the hopper for long life. • Stainless Steel Chassis & Rust-Proof Hopper. • Earthway ESS Remote Solenoid Operated Shutoff - opens & closes the shutoff at a touch of a switch. • Ev-N-Spred Dual Port Shutoff System with right & left side adjustable throwing ports that allow spread pattern adjustments based on material density of size of area to be covered. • Wiring Harness and on/off switch included. • Not Included - Factory Mounting Brackets Part No. AI M40

Wt. Part No. Lbs. Net Ea. WK CS694 6-Bushel (500 lb.) Steel Hopper...... 123 $ 533.00 WK CS1094 10-Bushel (800 lb.) Steel Hopper..... 141 572.00 WK CSP1094 10-Bushel (800 lb.) Poly Hopper...... 110 954.00 WK 420725 Optional Wheel Agitator................... - 51.60

Broadcast Spreader 12-Volt Electric

Net Ea. $ 977.00

Model 2700A

Is made for a smooth balanced operation for feather edge broadcast

Features: D

Enclosed Metal Gears

Features: High impact poly base • Durable cotton canvas seed bag with a zipper • Oscillating shut off plate to prevent clumping • Conveniently located flow control • Bearings are selflubricating nylon bushings • Metal Gears. Part No. AI 3100 AI 2700A

(800) 228-9666

D

Shoulder Held Broadcast Spreaders

DULTMEIER SALES • OMAHA, NE

Wt. 33 lbs.

D

Capacity 40 lbs. -

www.dultmeier.com

• 3-Hole Drop with Twin Flow Control Adjusting Plates • Flow Control with Infinite Settings & Positive Linkage • Massive Enclosed Nylon Gears • Nylon Straps • Rain Cover is Standard • Red molded hi-impact poly

Frame Zinc-Plated Tube Steel High Impact Poly

• DAVENPORT, IA

(800) 553-6975

D

Model 3100

is a large capacity shoulder held spreader

Wt. Net Ea. 9 lbs. $ 117.00 4 lbs. 33.35

E0419


374

Lawn/Turf Sprayers & Spreaders • Tanks Contoured ATV Sprayers

Spot Sprayer Tanks

With Boomless Nozzles

Great for weed spraying in pastures, along terraces, and other sloped or uneven terrain. 24 Gallon wrapped & contoured tank fits most ATV racks and provides a more balanced load for safer travel. 4.0 GPM on-demand pump sprays at 25 to 30 PSI. Double tank suction (one each side) provides for continued spraying on sloped ground. Includes adjustable D boomless nozzles for wide angle spraying. Single nozzle version covers 12’. Double nozzle version covers 35’ with left & right side control (via hand valves next to driver). Pistol grip spray gun (with holster), 20’ of 3/8” hose & hose rack. Hold down straps & wiring kit included. Tank rated to 14 lbs/gal (yellow). Dual drain plugs. 5” vented screw lid. 7' fixed and 10', 14' folding breakaway booms also available — Call for Details!

These 15 & 25 gallon blow molded polyethylene tanks are designed for use on spot sprayers. Features: Flat pump mounting surface with four 1/4-20 threaded inserts • Six 5/16-18 inserts D on the bottom surface for tank mounting • Molded in gallonage indi­cator • Ribbed for extra strength; UV inhibitors included • 5" threaded FW and cover with spring vent standard • Molded in recesses for strap mounting • Recessed ends for hose and spray gun • 3/4” Drain with plug at bottom for complete drainout • Standard color is yellow.

Part No. Gallons Height Width Length Wt. Net Ea. RV 10958 15 13" 16" 36" 13.5 lbs. $ 27.90 RV 10957 25 17" 18" 36" 8 lbs. 40.65 RT LD30-101 5" Lid for Spot Sprayer Tanks, less gasket - 5.30 RT 11042 Gasket for Lid.......................................... - 7.17

Spot Sprayers

Model TG SS24-DI fitted for anti-ice & de-ice of sidewalks.

Part No. TG SS24-S TG SS24-D TG SS24-DI

For unlimited uses such as lawn and garden, fence rows, trees, shrubs and cattle spraying. Premium poly tanks with threaded fasteners molded in bottom side of tank.

Contoured ATV Sprayer with: Wt. Net Ea. Single Boomless Nozzle......... 70 lbs. $ 632.00 Double Boomless Nozzle........ 70 lbs. 798.00 Anti-Ice & De-Ice Nozzles....... - 703.00

Features: 5" Screw on fill cap with vent • 12 feet of 3/8" noncoiled spray hose • Spray wand with fully adjustable spray tip • Available with bare wire leads or 96” wire harness with alligator clips and inline on/off switch.

Electric ATV Seeder/Spreader For All-Terrain Vehicles

D

Ideal for seeding pastures and cover crops. Units can also spread granular fertilizers or other granular materials. Designed Maintenance-free Polyethylene Hopper will not rust or corrode.Translucent design means it is an automatic material sight gauge. Standard Features Include: 12-Volt electric motor with a variable speed control • 1 Bushel capacity • Snap-on hopper lid prevents blowing of seeds keeps out moisture • 2-opening seed gate • Aluminum spreader fan • Mud and water shield to spreader fan • Complete wiring harness with clips for battery terminals • Can be installed or removed in minutes • Control lever can be easily reached by the operator. Part No. WK ATVS-100 12-Volt, ATV Seeder

Wt Net Ea. 42 lbs. $ 373.70

With 96” Harness, Switch, Fuse & Alligator Clips: Size Max. Amp Part No. (Gallon) Power Pump GPM PSI Draw

Net Ea.

DU SP14 15 12-Volt DC Diaphragm 1.8 60 7.3 $ 173.80 DU SP15 15 12-Volt DC Diaphragm 1.0 60 4.0 160.60 DU SP25 25 12-Volt DC Diaphragm 1.8 60 7.3 184.90 DU AR25 25 12-Volt DC Diaphragm 3.5 60 10.0 224.30 DS SS50800 Replacement Spray Wand with Extension, 1/4” FPT. 16.90

DU SP14-X DU SP15-X DU SP25-X DU AR25-X

Hose Reel & Mounting Kit Fits 14, 15 & 25 Gallon Spot Sprayers

15 15 25 25

12-Volt DC 12-Volt DC 12-Volt DC 12-Volt DC

Diaphragm Diaphragm Diaphragm Diaphragm

1.8 1.0 1.8 3.5

60 60 60 60

7.3 $ 123.30 4.0 95.95 7.3 100.50 10.0 157.10

ATV Sprayers Boom Kits

Includes 40 ft. Hose & Spray Gun with Wand

Use with Spot Sprayers Above Use these boom kits with spot sprayers above for ATV spraying. D

Kit Includes: Boom, mounting hardware, plumbing with EVA hose and nozzles. 10’ boom includes folding “break-away” action wings and fold-up feature. Nozzles are TeeJet #02 poly turbo-floods.

Kit Includes: Steel mounting bracket, manual hose reel, 40’ of 3/8” hose and spray gun with wand.

Boom Kits for ATV Sprayers Boom Nozzle Boom Part No. Length Nozzles Spacing Coverage Net Ea. DS B7-ATV 3’6” 2 42” 7’ $ 80.80 DS FB10ATV 7’0” 3 40” 10’ 117.70

Model SPHR Hose Reel & Mounting Kit Only (Sprayer Sold Separately)

Part No. DS SPHR

Model AR25 uses a ShurFlo Pump rated at 3.5 GPM. Includes pressure regulating valve to keep pump from cycling on and off.

With Bare Wire, 6” Leads on Pump (No Pressure Regulating Valve): Size Max. Amp Part No. (Gallon) Power Pump GPM PSI Draw Net Ea.

*All ATV seeders are shipped F.O.B. Illinois factory

Mount this reel kit it to your 14, 15 or 25 gallon spot sprayers to make it easier to spray those hard-to-reach places. Bolts to the underside of spot sprayers.

Models SP14, SP15, SP25 feature 12-volt Pumps with adjustable demand switch.

Description Wt. Hose Reel & Mounting Kit..... 50 lbs.

DULTMEIER SALES • OMAHA, NE

Net Ea. $ 318.20

(800) 228-9666

www.dultmeier.com

• DAVENPORT, IA

(800) 553-6975

E0418


Backpack Sprayers Professional Grade Backpack Sprayers

Agricultural Backpack Sprayers Fast, Efficient & Comfortable Backpack Sprayer for Herbicides, Insecticides, Fertilizer & Diesel! • Built-In Check Valve in Lid to Prevent Spills from Accidental tipping • Fold-Back Tubular Handle for Easy Storage & Transport • Piston - External Pump Capable of 80 PSI; Diaphragm - Capable of 80 PSI • 5.5” Wide Mouth for Easy Filling & Pouring • 4 Gallon Blow Molded Tank; UV Protection & Viton® O-Rings • Extra Wide Shoulder Straps • Adjustable Plastic Nozzle, 20” Poly Wand & 43” PVC Hose

375

Rugged Solo Backpack Sprayers are designed for nearly any spraying task. The ideal choice for Agriculture, Lawn and Garden, Small Tree and Brush spraying and many more.

Available in Two Pump Styles: Piston Pump for higher pressures (to 90 PSI) with standard chemical liquids. 425/435 Models. Diaphragm Pump can be used with wettable powders and formulations with small abrasive particles. Rated up to 60 PSI. 475/485 Models. All Models Feature: Durable poly tank with chemical-resistant seals and extra large fill opening • 28” Wand with shut-off valve and 48” reinforced hose • Metal frame for stability when filling • Interchangeable pump handle for right or left hand operation • Triple filter system: tank basket, inlet screen and nozzle filter • 4 or 5 gallon capacity as noted.

425 Piston Style D

302 D

CALL Description Wt. for 4 Gallon Backpack Piston Sprayer......... 10 lbs. 4 Gallon Backpack Diaphragm Sprayer. 10 lbs. PRICING

Part No. SX 302 SX 301

475 Diaphragm Style

“Professional” Series

New Disappearing 5-1/2” Lid

The Professional Series is designed for the professional and features the utmost in performance, comfort and safety. Use for herbicides, insecticides, fertilizer, and diesel. Blow molded tanks are ergonomically designed for comfort. Adjustable extra-heavy padded shoulder straps. 5-1/2” low profile lid with strainer. Patented pumps include high-gradeViton® O-rings and seals for maximum chemical resistance. 20" brass wand, 51" industrial hose & solid stainless steel pump handle; stainless frame and hardware. Adjustable brass nozzle (fan to solid stream); fan and floodjet also. Routine cleaning & maintenance can be done without tools!

Model 425 has 4 gallon capacity and piston pump for higher pressures. Model 475 has 4 gallon capacity and diaphragm pump for wettable powders. Model 435 has 5 gallon capacity, piston pump and adjustable pressure regulator which can be preset to 15, 30, 45 and 60 PSI. Model 485 has 5 gallon capacity, diaphragm pump for wettable powders. Also has adjustable pressure regulator with 15, 30, 45 and 60 PSI settings. 435 Piston Style

D

Model 100 includes jet agitation for wettable powders & micro-encapsulated products.

D

Model 101 is multi-purpose model; can also spray paints & other viscous products.

Maximum Empty

Part No. Capacity Pressure Pump Type Wt. SX 100 4 Gallon 150 PSI Sealed Piston/Diaphragn 10 lbs. SX 101 4 Gallon 70 PSI Sealed Diaphragm 10 lbs. Other Models Also Available.

D

CALL for PRICING

485 Diaphragm Style

Part No.

Commercial Series

D

401

The Commerical Series is designed for the economic minded professional. 5-1/2” low profile lid. Adjustable shoulder straps (nonpadded). Patented pumps include high-grade Viton® O-rings and seals for maximum chemical resistance. Steel pump and frame with stainless steel hardware. 20" brass wand and fan nozzle are standard. Series 201 is multi-purpose model;can also spray paints & other viscous products. Use 202 (The “Piston”) for high pressure spraying. Do not use with wettable powders. The popular Model 401 can be used with stains, sealers, solvents, herbicides, fertilizers, diesel and chlorine-based products up to 5.0%. Includes mechanical agitation for wettable powders.

Maximum

Part No. SX 201 SX 202 SX 401

Empty Capacity Pressure Pump Type Wt. 4 Gallon 70 PSI Sealed Diaphragm 13 lbs. 4 Gallon 120 PSI External Piston 13 lbs. * 4 Gallon 168 PSI Internal Piston 13 lbs.

CALL for PRICING

* Use for chlorine-based products; includes mechanical agitation. DULTMEIER SALES • OMAHA, NE

(800) 228-9666

Pump

Capacity

Wt.

Net Ea.

LO 425 * Piston 4 Gallon 10 lbs. $ 94.90 LO 475 * Diaphragm 4 Gallon 10 lbs. 96.95 LO 435 Piston 5 Gallon 12 lbs. 104.60 LO 485 Diaphragm 5 Gallon 12 lbs. 105.60 LO RK425 Repair Kit for 425/435................. 18.15 LO RK475 Repair Kit for 475/485................. 14.50 * 425/475 are the most popular models.

Accessories Part No.

SX KIT300 SX KIT13 SX KIT49.1 SX 284 SX KIT271A SX KIT18FA SX SPK7005 SX KIT24A SX 4016 SX 4021 SX 4043

Description Spray Pistol, 16" Brass Wand & Nozzle (Universal)................. Diaphragm Pump Assy Complete (Fits SP1,EK484 & Solo 475). Diaphragm Pump Assembly Complete (Fits SPO)................... CALL Adjustable Heavy Pad Shoulder Straps.................................. for 20” PVC Wand & Fittings Less Pistol (for 20A Acid Sprayer).... Spray Pistol with Filter (for 20A Acid Sprayer).......................... PRICING PVC Wand, Pistol & Nozzle Kit............................................... Nozzle Holder (for 20A Acid Sprayer)........................................ Fan Nozzle (for 20A Acid Sprayer)............................................. Adjustable Nozzle (for 20A Acid Sprayer).................................. O-Ring Set for Spray Pistol, Wand & Nozzle (for 20A Acid Sprayer)

www.dultmeier.com

Viton® is a registered trademark of DuPont Performance Elastomers

• DAVENPORT, IA

(800) 553-6975

E0417


Hand Sprayers

376

Economy Sprayers Designed for occasional spraying requirements. General purpose weed and pest control. Can also be used for deck cleaners and mildew removers. 2 Gallon capacity. Poly tank with wand and squeeze shut-off valve. Built-in pressure relief valve. Plastic adjustable nozzle. Easy-to-fill funnel top. 19” Wand and 29” Hose.

Model 406US

D D

Part No.

Wt.

Handheld Acid Sprayer For difficult acid applications, the handheld 462 Sprayer is the answer. Can be used for masonry cleaning with Muriatic acid (up to 20% maximum), HVAC coil cleaning, wheel cleaners, Phosphoric based cleaners and even hydrochloric solutions.

Model 462

Features: Polyethylene tank • Plastic shut-off valve • 25” Acid-resistant wand • 36” Hose • Adjustable nozzle • Funnel top design • 2.25 Gallon capacity.

Net Ea.

SL 406US Handheld Sprayer 2 Gallon Capacity... 4 lbs. $ 20.15

Part No.

Industrial Sprayers

D

Handheld sprayers engineered for the Professional. Rugged design for harsh environments. Ideal for use with weed and pest chemicals as well as degreasers, carpet care products, disinfectants and many other solutions.

Model 456

Contractor Series Sprayers

Model 457R with wheels

D

D

Wt.

487CI is for use with Acetone and solvents including alcohols and ammonia. EPDM seals, 72” hose, plastic shut-off, 20” brass wand are standard.

Net Ea.

LO 456 Industrial Handheld Sprayer.............. 2.25 Gallon 4 lbs. $ 46.25 LO 457 Industrial Handheld Sprayer.............. 3 Gallon 7 lbs. 51.50 SL 457R Industrial Sprayer with Wheels.......... 3 Gallon 9 lbs. 67.60 LO 4900170N Replacement Shut-Off Valve/Nozzle/Wand Kit........ 19.35

Capacity

Wt.

Net Ea.

SL 407CI Curing/Solvent Sprayer............... SL 487-CI Acetone Sprayer.........................

3 Gallon 3 Gallon

6 lbs. 7 lbs.

$ 62.15 83.80

“Acid & Construction” Series

Specifically Designed for Spraying Acetone & Alcohol

20C

Handles Agressive Acids & Chemicals

The Acid & Construction Series is expressly built to handle the aggressive acids & chemicals of the construction industry. Also use for industrial cleaning/janitorial applications. 20A is specifically designed for spraying muriatic, hydrofluoric & phosphoric acids; acid-based stains and acid-etching products. Use SP35C & 20C for curing compounds, form release agents, form oil, diesel, oil & water-based sealers. 20A includes 4.5" diameter tank mouth;SP35C includes 4.5" “WideMouth”feature. Patentedpumpsandhigh-gradeViton® O-rings, seals & gaskets for maximum chemical resistance to acids, construction & industrial chemicals. 20" PVC wand on 20A; 20" brass wand on SP35C D and 20C. 59" industrial hose on 20A & SP35C. 47" hose on 20C. Fan nozzles. NOTE: Not for chlorine, solvents or degreasers. Maximum Part No. Capacity Pressure Pump Type Empty Wt. CALL SX 20A 2 Gallon 42 PSI 12" Compression 6 lbs. for SX 20C 2 Gallon 42 PSI 12” Compression 6 lbs. PRICING SX SP35C 3.5 Gallon 42 PSI 12" Compression 8 lbs.

Acid Sprayer

• Large 5-3/8” Wide Opening with Strainer for Easy Filling • 20” Brass Wand with 59” Hose; Adjustable Plastic Nozzle • Pressure Relief Valve up to 40 PSI SP20ACT D

• Strainer Included Part No. SX SP20ACT SX SP35ACT

D

Part No.

Acetone/Alcohol Sprayers

• Convenient Wand Storage Clip in Handle & Large Shoulder Strap

Model 487-CI

407CI is for use with up to 35% curing compounds. 1/2 and 1 GPM nozzles for curing, form release, sealing and general spraying. Viton® seals, 48” hose and plastic 28” wand are standard.

Model 457R features wheels for easy transport and 72” hose for remote spraying. Capacity

Net Ea.

Handheld sprayers designed for the construction industry. Ideal for use with curing compounds or Acetones as noted. Hand pump for pressurization but can also be pressurized from air compressor or air tank. High density, polyethylene tanks. 3 Gallon capacity. Nozzle sets for different application rates.

Features: Plastic shut-off valve • Heavy duty pump that pressurizes with less strokes • 4-1/2” Tank opening for easier filling and cleaning • High density, polyethylene tank • Extra long, 48” nylon reinforced hose • 28” Unbreakable wand • Automatic pressure relief valve. Part No.

Wt.

SL 462 Handheld Acid Sprayer 2.25 Gallon Capacity... 4 lbs. $ 46.45 5% Discount on 3 or More

Description Wt. 2 Gallon Acetone Sprayer...... 10 lbs. 3.5 Gallon Acetone Sprayer... 8 lbs.

CALL for PRICING

Viton® is a registered trademark of DuPont Performance Elastomers

DULTMEIER SALES • OMAHA, NE

(800) 228-9666

www.dultmeier.com

• DAVENPORT, IA

(800) 553-6975

E0972


SOLO Sprayers & Spreader Bleach Sprayer

Part No.

Wt.

Backpack Mist Blower

Model 1201S

Handheld sprayer specifically design for Bleach Solutions. Perfect for cleaning and removing dirt and mildew stains from decks, patios, walls and siding. Can also be used for disinfectants. All poly construction. Standard with Viton® seals and adjustable nozzle. (1) Gallon capacity. 15” Wand and 41” Hose.

377

Backpack Mist Blower is designed for applying plant and tree protection chemicals or for pest and parasite control in animal herds. Creates a fine mist over large areas. Much more efficient than manual spraying.

Net Ea.

SL 1201S Handheld Bleach Sprayer 1 Gallon Capacity.... 3 lbs. $ 26.80 5% Discount on 3 or More

D D

Model 451

Stainless Steel Sprayer

Features: Padded backrest with antivibration mounts • 1/2 Gallon fuel tank with low fuel consumption allows for up to 80 minute run time • Chemical tank has 3 gallon capacity • Easy starting, 2-Cycle, 2-1/2 HP engine • Rated to 824 cfm • Application rate is up to 38 ft.

If your chemical spraying requires stainless steel for compatibility, this is the sprayer you need. An excellent choice for herbicides, pesticides and general purpose spraying. Features: Corrosion-resistant, stainless tank • Plastic shut-off valve • 29” Brass wand • 48” Hose • Brass adjustable nozzle • Extra large handle • 2.25 Gallon capacity • Viton® Seals.

Part No. D

Wt.

Part No.

SL 451

HP

Mist Blower.............. 2-1/2

Wt.

24 lbs.

Net Ea.

$ 706.00

Spreader

Net Ea.

SL 469 Stainless Handheld Sprayer 2 Gallon Capacity........ 7 lbs. $ 120.20

Granular Applicator Spreader from Solo. The ideal choice for use with seed, fertilizer and ice melt products. Plastic construction with fully enclosed gear box and lubricated metal gears for added corrosion-resistance and long life. Adjustable for drop rate and throw direction. Polyethylene tank has 20 lb. capacity. Padded strap with cross shoulder design.

Visit Our Office in Omaha, Nebraska

D

13808 Industrial Road • Omaha, NE 68137 1-800-228-9666 • 1-402-333-1444 • FAX: 1-402-333-5546

Visit Our Office in Davenport, Iowa

Part No.

Capacity

SL 421S Granular Spreader...

20 lbs.

Wt.

7 lbs.

Net Ea.

$ 69.65

To Deliver the Best Possible Service to Our Customers,

601 West 76th St. • Davenport, IA 52806 1-800-553-6975 • 1-563-386-0930 • FAX: 1-563-386-5448

Dultmeier Sales Strives to Live Up to

e-mail: dultmeier@dultmeier.com • website: dultmeier.com

A Set of Core Values, One of Which is to Be “Customer Focused”

Partnering to meet and exceed customer expectations

Viton® is a registered trademark of DuPont Performance Elastomers

DULTMEIER SALES • OMAHA, NE

(800) 228-9666

www.dultmeier.com

• DAVENPORT, IA

(800) 553-6975

E1054


SOLO Sprayers & Spreader

378

Compact Chemical Sprayers from Solo are designed for food processing areas, carpet cleaning, janitorial, commercial building cleaning, sanitation, public use areas, etc. Available in misting or foaming designs. Lightweight but sturdy translucent tanks. Quick and efficient pressure buildup. Adjustable spray nozzles for even and direct spray patterns. • Viton® Seals are the best choice for cleaning solutions containing oil or chlorinated hydrocarbons, concentrated or diluted acids with a ph of 1-7. Also good for bleach solutions. • EPDM Seals are the best choice for solutions that have an alkaline base with a ph of 7-14. Ideal choice for disinfectant solutions. • Nitrile Seals will work with most soaps, detergents and carpet cleaning products, but not aggressive chemicals.

Handheld Sprayers Larger Direct Spray and Mist Sprayers feature piston pumps that create operating pressure in a few strokes. Larger capacities mean less filling. Includes safety pressure relief valve, long/wide carrying strap, visible fill level markings, plastic wand and hand valve, 4-1/2’ reinforced hose and adjustable spray nozzle. * Viton® or EPDM seals as noted.

— Foaming Design — Easy-To-Use, Compact Foaming Hand Sprayers increase dwell time and reduce moisture and mist in cleaning solutions. Piston pumps enable quick pressurization. Large openings for easy filling. Safety relief valve vents excess pressure. Adjustable spray nozzle. Translucent tanks. Model 404VF is a standard foam sprayer with manual spray nozzle adjustment. Model 301 units feature VarioFoam knobs that allow for moisture level in the foam to be endlessly adjusted even while working.

Model 307A & B

Model 305A & B

Compact Hand Sprayers

Vari-Foam Control

D D

Part No.

SL 305A SL 305B SL 307A SL 307B

Capacity

Direct Sprayer, *Viton® Seals... Direct Sprayer, *EPDM Seals.... Direct Sprayer, *Viton® Seals... Direct Sprayer, *EPDM Seals....

Wt.

5 Liter (1.32 Gal.) 5 Liter (1.32 Gal.) 7 Liter (1.85 Gal.) 7 Liter (1.85 Gal.)

Net Ea.

2.6 lbs. $ 53.40 2.6 lbs. 48.70 2.8 lbs. 55.50 2.8 lbs. 52.50

Model 301FA & FB

Compact Hand Sprayers

Model 404VF

D

— Non Foaming — Compact Hand Sprayers can be used with one hand. Easy-to-use, even with gloves. Adjustable spray nozzle allows for mist to stream. Large opening for easy filling. Top handle for fast and efficient pressure buildup. Translucent tanks allow for fill viewing.

Part No.

Capacity

D

Wt.

Net Ea.

SL 301FA Hand Foam Sprayer, *Viton® Seals 2 Liter 1.5 lbs. $ 20.15 SL 301FB Hand Foam Sprayer, *EPDM Seals. 1.25 Liter 1.0 lbs. 16.70 SL 404VF Hand Foam Sprayer, *Viton® Seals 1.25 Liter 1.0 lbs. 21.20

Large Capacity Foaming Sprayer Model 456-F is designed to foam chemical solutions onto vertical or horizontal surfaces. Longer dwell times can increase chemical effectiveness and reduce overspray and mist. Polyethylene tank, plastic shut-off valve, pressure gauge, brass wand, foam nozzle, Viton® seals Model 456-F

D

D

D

Model 415

Part No.

Model 302B

Model 404

Capacity

SL 415 Hand Sprayer, *Nitrile Seals...... 1 Liter SL 302B Hand Sprayer, *EPDM Seals..... 2 Liter SL 404 Hand Sprayer, *VITON® Seals. 2 Liter Quantity Discounts Available

Wt.

Net Ea.

0.5 lbs. 1.5 lbs. 1.5 lbs.

$ 7.42 15.10 15.10

D

Part No.

Capacity

Wt.

Net Ea.

SL 456-F

2 Gallon

6 lbs.

$ 70.65

Foam Sprayer, * Viton® Seals....

Viton® is a registered trademark of DuPont Performance Elastomers

DULTMEIER SALES • OMAHA, NE

(800) 228-9666

www.dultmeier.com

• DAVENPORT, IA

(800) 553-6975

E1142


Sprayers • Jetter Units

379

25 Gallon Trailer Sprayers Great for Spraying Acreages & Other Small Areas! Great for spraying acreages and other small areas. Include 25 gallon tank with 5” top lid, 12 volt diaphragm pump (1.4 GPM), spray wand with adjustable nozzle, suction strainer and 10’ of 3/8” hose. Choice of 7’, 10’ or 14’ coverage booms (10’ and 14’ are folding booms).

Part No. DU 25TRL7 DU 25TRL10 DU 25TRL14

Description Net Ea. 25 Gallon Trailer Sprayer with 7’ Coverage Boom.... $ 368.20 25 Gallon Trailer Sprayer with 10’ Coverage Boom.. 470.20 25 Gallon Trailer Sprayer with 14’ Coverage Boom.. 572.00

25TRL Trailer Sprayer

60, 110, & 200 Gallon Trailer Sprayers

These Versatile Trailer Sprayers come with compact formed steel frames, yellow poly tanks with 5” top lids, 12V diaphragm pumps (3.5 GPM demand style) or Hypro roller pumps direct coupled to engines for higher flowrates (gear reduction engines on 110, 150 and 200 gallon). All models come with 25’ of 3/8” hose, handgun with adjustable nozzle, suction strainer, gauge and bypass relief valve. The transport wheel kits include flotation tires with tongue & stand (jack on 200 gallon models); they are also removable to allow conversion to a skid sprayer for pickups and other small vehicles (150 gallon removable and smaller). Add a 7’, 10’, 15’ or 21’ boom from adjacent pages if desired.

Boom Sold Separately (See adjacent pages for booms)

Part No. Description DU TRL60E 60 Gallon Trailer Sprayer, 12V Pump............. DU TRL60B 60 Gallon Trailer Sprayer, 3.5HP Briggs Intek.... DU TRL110E 110 Gallon Trailer Sprayer, 12V Pump........... DU TRL110H 110 Gallon Trailer Sprayer, 5.5 HP Honda...... DU TRL150E 150 Gallon Trailer Sprayer, 12V Pump........... DU TRL150B 150 Gallon Trailer Sprayer, 5.5 HP Briggs Intek. DU TRL200E 200 Gallon Trailer Sprayer, 12V Pump........... DU TRL200B 200 Gallon Trailer Sprayer, 5.5 HP Briggs Intek.

Max. Max. Flow Rate Pressure Net Ea. 3.5 GPM 45 PSI $ 689.00 7.0 GPM 150 PSI 1589.00 3.5 GPM 45 PSI 1234.00 22 GPM 150 PSI 2525.00 3.5 GPM 45 PSI 1513.00 22 GPM 200 PSi 2683.00 3.5 GPM 45 PSI 2065.00 22 GPM 200 PSI 3264.00

Pro-Tow Jetter Units Sewer / Jetter Trailer Units. All models include the following features: Electric start engine • Electric rewind hose reel • 200 Gallon water tank with float valve • General brand plunger pump with pulse valve • Foot activated control valve • Jetter nozzle pack • 25 Gallon winterizing tank • Marine battery • 15 Gallon fuel tank. Trailers are rated to 3500 lbs. capacity and include powder-coated frame, 15” tires, aluminum fenders, lights, jack, safety chains, poly tool box and external grease fittings. Complete jetter dimensions are 135” L x 82” W x 60” H.

D

All units are fully assembled and tested prior to shipping. Hose reel capacity is 500’ of 3/8” or 350’ of 1/2” hose. Hoses are not included but can be ordered to meet your specific needs.

Part No.

Max. Flow

Max. PSI

BI 535JTR BI 835JTR BI 1030JTR BI 1230JTR

5.5 GPM * 8.0 GPM * 10 GPM * 12 GPM

3500 PSI 3500 PSI 3000 PSI 2800 PSI

Engine

Wt./Lbs.

Net Ea.

GX630 Honda 1485 $ 8414.00 GX690 Honda 1495 9075.00 27 HP Kohler 1495 10451.00 30 HP Kohler 1500 10502.00

* 8 GPM Unit can use 3/8” hose, but 1/2” is recommended due to pressure loss. 10 & 12 GPM Units require 1/2” hose.

DULTMEIER SALES • OMAHA, NE

(800) 228-9666

www.dultmeier.com

• DAVENPORT, IA

(800) 553-6975

E0919


380

Foam Markers • Planter Hoods Foam Markers

CDS-John Blue Foam Marker Kits consist of a 12-volt compressor, a solution tank, control box and parts necessary for installation on any type of spraying equipment. Foam is generated at the end of the boom. This eliminates the foam breaking down in the boom.

Features of the FM-10 ATV Foam Marker: 2 x 7 ft. of liquid and air tubing both at 1/4” diameter • 10 ft. of cable supplied to connect the remote switch to the compressor • 6 ft. of power cable connects remote switch to power supply • Switches include on/ off and left or right • Ball valve also included for foam regulation.

FM10

Features of the FM-40 Golf/Turf Foam Marker: Compressor is factory mounted on the tank • 52 ft. of liquid and air tubing (for end of boom discharge) • Air tube: 1/4” diameter • Liquid tube: 1/4” diameter • 15 ft. of cable to connect the remote switch to the compressor is supplied • 6 ft. of power cable connects remote switch to power supply • Boom size up to 40 ft. • Switches include on/off and left or right • Ball valves also included for flow regulation. FM40 FM150

Features of the FM-150 Agricultural Foam Marker: Compressor is factory mounted on the tank • 118 ft. of liquid and air tubing • Air tube: 5/16” diameter • Liquid tube: 1/4” diameter • Includes 15 ft. of cable to connect the remote switch to the compressor • Boom size up to 100 ft. • Switches include on/off and left or right • Ball valves also included for flow regulation.

Part No. BU FM10 BU FM40 BU FM150 BH TC107CDC20

Thompson Compressor for Foam Markers:

Foam Markers Wt. Net Ea. 1 Gallon for ATV 35 lbs. $ 511.00 4 Gallon for Golf/Turf 35 lbs. 868.00 15 Gallon for Ag 52 lbs. 1110.00 Compressor for Foam Markers 503.00

Rated @ 20 PSI continuous, 30 PSI intermittent duty. CFM .77 to .66, 8.1 AMP 1/8” FPT

Planter Banding Hoods 9000-4C Planter Banding Hood Kit includes: (1) Banding Hood. (1) Universal Mounting Bracket with hardware. (1) Rubber Bungee Strap. (1) Stainless Steel Tube. (1) Spray tip with screen and fittings. (1) Redball Spray Monitor with each 4 kits ordered. Note: 25' EVA Hose no longer supplied.

Part No.

Description

REDBALL Planter Banding Kits for Reduced Spray Drift in Adverse Wind Conditions. • Constructed of 3/16" high impact polyethylene. • Universal mounting hardware to fit most all planters. • Rubber bungee strap resets hood to proper position if obstructions are encountered. • Stainless steel tube and spray tip. • Nozzles are adjustable within the hood for height and angle to set proper band width.

Net Ea.

MZ 9000-4C Complete Planter Hood Kit $ 242.40 MZ 9000-4 Planter Banding Hood Only 54.55

DULTMEIER SALES • OMAHA, NE

(800) 228-9666

www.dultmeier.com

• DAVENPORT, IA

(800) 553-6975

E0424


Self-Propelled Broadcast Spray Hood

381

Self-Propelled Broadcast Hooded Retrofit Kit SPK645 Fast Facts: • Hoods provide significant reduction in drift and increased coverage (Upt ot 90%). • Kits available for most self-propelled models. • Kits include Redball® Gen II Broadcast Hoods, receiver brackets, hardware to mount hoods on center section, and right and left primary booms. • Brackets engineered to fit specific sprayer model. • After initial installation hood assemblies can be put on or removed in five minutes. • Hoods utilize factory spray plumbing for ease of installation. • Mounting brackets made from lightweight aluminum. Approximate weight is 9 lbs. per foot.

SPK645 Self-Propelled Broadcast Hooded Retrofit Kit on John Deere

• Hoods and mounts will not interfere with factory spray boom functions, folding or operation.

Part No. WL SPK645

John Deere SPK645 with Broadcast Spray Hoods

John Deere 4730 with Broadcast Spray Hoods

Redball Spray Hoods on Case DULTMEIER SALES • OMAHA, NE

Description Net Ea. Self-Propelled Broadcast Hooded Retrofit Kit........................... $ 18130.00

Call with Sprayer Make, Model & Nozzle Spacing for System Pricing. 3-Point Sprayer Models Also Available (800) 228-9666

www.dultmeier.com

• DAVENPORT, IA

(800) 553-6975

E1081


Trailer • Lawn/Turf Sprayers

382

XXL Large Heavy-Duty Trailer Sprayers Built for Heavy-Duty Use with These Standard Features: • Cropcare Style Poly Tank with Sump with 16” Fillwell • (2) Large Single Tires (13.6 x 38) with Row Spacing of 60” to 144” (120” standard) • Gas Charged Shocks • 3” x 5” Rectangular Tube Steel Frame & 4” x 6” x 90” Axle • Large Work Stand with Handrail & Retractable Step • Heavy Duty Screw Jack & 9 Gallon Wash Tank • 60’ Spray Coverage XXL Heavy-Duty Hydraulic Fold and Self-Leveling Boom with Hydraulic Adjustable Center Section. Also includes QuickJet Nozzle Bodies with Diaphragm Check Valves & Caps; 1” & 3/4” EPDM Spray Hose, Nozzles of Your Choice on 20” Centers & Suction Strainer • Hydraulic Drive Sprayer Pump, Sprayer Controls, and Foam Markers are Extra • Hydraulic Hose Kit is Included

Large Heavy Duty Part No. DS XXL1060-CC DS XXL12560-CC DS XXL1580-CC

Trailer Sprayers Size Description Net Ea. 1,000 Gallon Cropcare Tank Sprayer with 60’ XXL Boom, Less Pump.... $ 14547.00 1,250 Gallon Cropcare Tank Sprayer with 60’ XXL Boom, Less Pump.... 15233.00 1,500 Gallon Cropcare Tank Sprayer with 80’ XXL Boom, Less Pump.... 22859.00

Self-Loading Turf Sprayers 400 Series for Small Trucks & Pickups

Portable Diaphragm Pump Sprayer with Built-On Hose Reel

325 & 450 Gallon Self-Loading Turf Sprayers can be quickly and easily loaded & unloaded into standard 8' pickup beds by one person! No forklifts required! They include steel frames with a tough powdercoat paint finish, rotating front legs and telescoping rear legs. They also feature low profile tanks, Hypro roller or diaphragm pumps with Honda 5.5 Hp gear reduction engines, Hannay manual hose reel with 300' of 1/2" high pressure hose, adjustable pattern spray gun. Great for private contractors and government agencies! Approximately 9'8" long, 48" wide, 34" high (325 gallon), 38" high (475 gallon).

DU 1D403 D

D

DU 1A026 Booms and other options available; please call.

Part No. Description Net Ea. DU 1A026M 325 Gallon Sprayer with 7560N Roller Pump & 5.5HP Honda (7.1 GPM at 300 PSI).................... $ 4899.00 DU 1A026N 450 Gallon Sprayer with 7560N Roller Pump & 5.5 HP Honda (7.1 GPM at 300 PSI)................... 5045.00 DU 1A026P 325 Gallon Sprayer with D403 Diaphragm Pump & 5.5 HP Honda (9.5 GPM at 580 PSI)................... 4821.00 DU 1A026Q 450 Gallon Sprayer with D403 Diaphragm Pump & 5.5HP Honda (9.5 GPM at 580 PSI).................... 4850.00

This versatile pump unit with hose reel can be used for turf & tree spraying (to 35’ high), liquid anti-icing/de-icing of sidewalks and other small areas, light cleaning etc. Unit includes Hypro D403GRGI diaphragm pump with pressure control & Honda 5.5 HP gear-reduction engine (9.5 GPM at 580 PSI), high pressure hose reel with 100’ of 1/2” abrasion-resistant hose (600 PSI rating), Hypro 3381-13 turbo spray wand (adjustable from solid stream to mist pattern), Steel stand (powder coated). 1” x 10’ suction hose also included with polypropylene. camlock and valve for quick attachment to mini-bulk tanks, totes, drums, etc. Self-Priming to 12'.

Spray Control Option includes: 744 pressure based console, 3/4" regulating valve, 1" boom, on-off valve and power/ control wire harness (for one section boom). Variations and other options available, please call.

Visit Our Web Site at http://www.dultmeier.com or E-Mail us at dultmeier@dultmeier.com

Part No. DU 1D403 DU 1B101 DU 1A030

Description Net Ea. Portable Diaphragm Pump Unit with Hose Reel.... $ 2660.00 1” Plumbing Kit for above sprayer (for connection to top of tanks w/ 1” or 2” port)...... 70.50 Sprayer Control Option (TeeJet 744)..................... 1012.00

DULTMEIER SALES • OMAHA, NE

(800) 228-9666

www.dultmeier.com

• DAVENPORT, IA

(800) 553-6975

E0421


Trailer Sprayers & Booms

383

300 & 500 Gallon Trailer Sprayers & Booms Heavy-Duty Trailers for a Wide Variety of Spraying Applications. All models include 300 or 500 gallon elliptical tanks with sumps and 10” fillwells, heavy-duty steel frames with 90” axles, 11L x 15 tires, tongue hitch, heavy duty jack and centrifugal pump hose kit. 3 Gallon wash tank, strainer, and tank agitator also included. Boom, pump and controls sold separately. TS300PT43 includes special “Combination” boom with 11” overall width and with boomless nozzles on each wing for spraying up to 43’ overall width (each wing sprays 16’ and center section sprays 11’) Includes Hypro 1700C roller pump/multi-speed coupler. 3 Section control (switch box) with manual valve pressure control. End boom sections are “breakaway” style and fold for transport (8’ transport width). Great for pastures, acreages, tree and hilly areas and ditches. Applies 10 GPA at 4 to 5 MPH. TS300PT is the same sprayer but with boomless nozzles (no boom) for spraying up to 35’ with two section left/right boom control (switch box), manual valve pressure control and Hypro 1700C pump/coupler. 500 Gallon models are high clearance and include large work area with handrail. Use tandem axle version for rough, uneven ground.

300 Gallon Trailer Sprayer shown with “Combination” Boom for 43’ Coverage

300 & 500 Gallon Trailer Sprayers

Part No. Description Net Ea. DS TS309 300 Gallon Single Axle Trailer Sprayer, Less Boom & Pump.................. $ 2368.00 DS TS509 500 Gallon Single Axle Trailer Sprayer, Less Boom & Pump.................. 4356.00 DS TT509 500 Gallon Tandem Axle Trailer Sprayer, Less Boom & Pump............... 5480.00 DS TS300PT 300 Gallon Single Axle Trailer Sprayer with Boomless Nozzles for 35’ Coverage....................................................... 3227.00 DS TS300PT43 300 Gallon Single Axle Trailer Sprayer with “Combination” Boom for 43’ Coverage.................................................... 3636.00

Folding “Breakaway” Booms for 300 & 500 Gallon Trailer Sprayers

* Number Nozzle Nozzle Part No. Description Coverage Nozzles Spacing Body Type DS FBS21 21’ Coverage Boom 21’ 13 20” Standard, EVA DS FBQ21 21’ Coverage Boom 21’ 13 20” Quickjet, EPDM DS FBS30 30’ Coverage Boom 30’ 19 20” Standard, EVA DS FBQ30 30’ Coverage Boom 30’ 19 20” Quickjet, EPDM DS FBQ11BB 43” Coverage Boom 43’ 7@20” + 2 Boomless Quickjet, EPDM * Nozzle bodies are included, but nozzles and caps are sold separately.

Net Ea. $ 447.00 553.00 1006.00 1142.00 604.00

— Larger Booms also Available —

Electric & Manual Boom Controls (1 Control Below is Required) Part No.

Description

DS HY3WV 3-Section Manual Lever Control with Mount................................................... DS SSAA6B-K 1-Section Manual Lever Control with Mount................................................... DS TIRC-1B-K 3-Section Texas Remcor Control with Gauge, Regulating Valve & (3) Solenoid Valves with Mount................................................. DS GHR-25 Optional Hand Gun Kit for 300 to 500 Gallon, 3 Pt. Includes 25’ Hose, Gun, 18” Wand, Adjustable Nozzle......................................... — Other Pumps & Control Systems Available —

Net Ea.

$ 178.30 85.10 517.00

FBS30 Folding “Break-Away” Boom (Shown here on 3-Point Sprayer)

171.70

60 Gallon Utility Cart Sprayer 12 Volt • Boomless Nozzles Spray 30’ Width

US60B-COM

This 60 Gallon Boomless Sprayer is very versatile and will fit inside all utility vehicles (with 32” x 44” or larger bed dimensions). Features: 4.0 GPM, 12 Volt Diaphragm Pump • (2) Solenoid Valves • In-Cab Switch Box and Wiring Harness for Left & Right Control • 25’ of Hose with Hand Gun for Spot Spraying • 60 Gallon Poly Tank is Bolted to a Steel Skid for Quick & Easy Installation • (2) Boomless Nozzles Mounted on Swivel Bracket for width adjustment to 30’ (15’ left, 15’ right or both) • Dimensions: 24” x 36” x 30” High. Part No. DS US60B-COM TG US60B-3.5PG

DULTMEIER SALES • OMAHA, NE

(800) 228-9666

www.dultmeier.com

Description Net Ea. 60 Gallon Utility Cart Sprayer................ $ 917.00 Same as above - Less Boom, Nozzles, & Controller (Spot Spraying Only)......... 406.10

• DAVENPORT, IA

(800) 553-6975

E0889


384

Skid Mounted Spraying Systems Low Profile Skid Sprayers

“Space Saver ®” Skid Mounted Spraying Systems 50 & 100 Gallon Models Great for Weed, Insecticide, Fungicide & Fertilizer Spraying and Many Other Uses! Standard Features Include: • These compact units fit in front end of pickup bed between cab & wheel wells - 2/3 of your bed remains open! • Hose reel positioned for convenient access from right side of bed. • Heavy-duty welded skid frames with extra-tough powder coat paint finish. • Honda engines (Other engines available). • Hypro roller or diaphragm pumps. • Hannay hose reels with 300’ of 1/2” 600 PSI chemical hose & spray gun. • Skid Units include strainer, valves, agitation, pressure regulator, gauge (when required) and spray gun. • Can be customized with any pump unit fitting on a 12" x 30" baseplate. These compact sprayers are made to use in tight spaces.

Compact Skid Sprayers for a wide range of applications. Ideal for pest control, lawn and turf, brush fire control, tree spraying and much more. Heavy-duty aluminum skid frame is designed to be forked or lifted into place. Easily fits into pickup beds or all terrain vehicle beds such as Polaris or Gator. Manual hose reel holds up to 100’ of 1/2” or 200’ of 3/8” spray hose. Can be top filled from lid opening also. * Quick-fill option is included for filling tank from garden hose water supply.

Standard Features Include: • Compact Size, 32” W x 44” L x 40” H • 68 Gallon Low Profile Water Tank with Agitator • Manual Hose Reel • Honda Gas Engine • Hypro or Udor Diaphragm Pump with Pressure Control • Quick-Fill Water Tank • 100’ of 1/2” Chemical Resistant Spray Hose

Shown with Optional Collar Assembly

• Adjustable Pattern Spray Wand • Tank Strainer • Pre-Plumbed and Ready for Use

40” H

DU 1A009E-A Shown

D

DU 1A008E

Unit Dimensions Length Width Height 3'9" 3'2" 4'0" DU 1A004 Standard Features: Hypro 7560NR Roller Pump with 5.5 HP Honda • 50 Gallon Tank • Manual hose reel with 300' of 1/2" 600 PSI hose & lawn spray gun • Rated to 7 GPM @ 300 PSI. DU 1A003B Standard Features: Hypro 7560NR Roller Pump with 5.5 HP Honda • 100 Gallon Tank (50 gallon available) • Manual hose reel with 300' of 1/2" 600 PSI hose & lawn spray gun • Rated to 7 GPM @ 300 PSI. DU 1A003BE Standard Features: (Same as 1A003B except with a 12 Volt electric hose reel). DU 1A008 Standard Features: Hypro D403 Diaphragm Pump with 5.5 HP Honda • 100 Gallon Tank (50 gallon available) • Manual hose reel with 300' of 1/2" 600 PSI hose & turbo adjustable spray gun • Rated to 10 GPM @ 580 PSI. DU 1A008E Standard Features: Hypro D403 Diaphragm Pump with 5.5 HP Honda • 100 Gallon Tank (50 gallon available) • 12V electric hose reel with 300' of 1/2" 600 PSI hose & lawn spray gun • Rated to 10 GPM @ 580 PSI. Standard Wt. Part No. Gallons Standard Pump Hose Reel Lbs. Net Ea. DU 1A004 50 7560NR Roller, 5.5 HP Honda...... * Manual/Crank 375 $ 3113.00 DU 1A003B 100 7560NR Roller, 5.5 HP Honda...... * Manual/Crank 400 3270.00 DU 1A003BE 100 7560NR Roller, 5.5 HP Honda...... 12 Volt Electric 400 3616.00 DU 1A008 100 D403 Diaphragm, 5.5 HP Honda...... * Manual/Crank 360 3642.00 DU 1A008E 100 D403 Diaphragm, 5.5 HP Honda...... 12 Volt Electric 400 4029.00 * Hose Roller Assembly & bottom mount bracket (DU HRA1) also available. DULTMEIER SALES • OMAHA, NE

(800) 228-9666

44

”L

D

”W

32

DU 1A0010: Rated to 4.5 GPM @ 275 PSI. Standard with Udor Diaphragm pump and 4 HP Honda engine. Includes 200’ of 3/8” spray hose. DU 1A0011: Rated to 7 GPM @ 350 PSI. Standard with Udor Diaphragm pump and 4 HP Honda engine. Includes 100’ of 1/2” spray hose. DU 1A009E-A: Rated to 10.6 GPM @ 580 PSI. Standard with Hypro Diaphragm pump and 5-1/2 HP Honda engine. Includes 100’ of 1/2” spray hose. Wt. Part No. Output Engine Lbs.

DU 1A0010 4.5 GPM @ 275 PSI DU 1A0011 7 GPM @ 350 PSI DU 1A009E-A 10 GPM @ 580 PSI DU 1A009E-AF *10 GPM @ 580 PSI

4 HP 4 HP 5-1/2 HP 5-1/2 HP

210 210 215 215

* Has Quick-Fill Option for filling tank from garden hose water supply.

Net Ea.

$ 2921.00 3149.00 3492.00 3455.00

200 Gallon Skid Units & Dual 100 Gallon Skid Units are also available! •

www.dultmeier.com

• DAVENPORT, IA

(800) 553-6975

E0422


Skid Mounted Spraying Systems 500 Gallon Skid Mounted Spraying Systems

385

200 & 300 Gallon Skid Mounted Spraying Systems For Weed,

500 Gallon Skid Mount Spraying Units from Dultmeier D D Sales are ideal for a wide variety of applications DU SM500-8015 such as weed/ turf spraying and tree spraying. Units are gas engine driven and come standard with 500 Gallon tanks and heavy-duty steel frames. All pumps are driven by Honda gas engines. Note: All units include Hannay Manual Crank Hose Reels with 300’ of 1/2” 600 PSI hose and spray gun. (135’ of 3/4” hose on SM500-8015 & SM500-AR50). Dimensions are 96” L x 40” W x 57” H.

Insecticide, Fungicide & Fertilizer Spraying These compact sprayers are made to use in tight spaces.

DU 1A021

Standard Features for all units include: Heavy-duty welded steel frame that is 34" wide x 72" long x 50" high (93" long on the 300 gallon units) • Powder coat paint finish for extra durability • 200 or 300 gallon poly tanks • Vented top lids and gallonage markers • Hannay hose reels with 300' of 1/2", 600 psi hose • All skid units include pump, strainer, valves, agitation, pressure regulator, gauge (when required) and spray gun. Note: These skid units can be customized with any pump unit fitting on a 12" x 30" baseplate.

500 Gallon Skid Mounted Sprayer Units Are Available in Five Different Pumping Options:

200 GALLON UNITS 1A021 Standard Features: 7560XLR pump with 4.8 HP Honda • 200 Gallon Tank • 12 volt hose reel with 300' of 1/2" 600 PSI hose and gun. 1A022 Standard Features: 1502XL pump with 7 HP Honda • 200 Gallon Tank • 12 volt hose reel with 300' of 1/2" 600 PSI hose and gun. 1A000 Standard Features: D403 diaphragm pump with 4.8-Hp Honda • 200 Gallon Tank • 12 Volt hose reel with 300' of 1/2" 600 PSI hose and gun. 1A001 Standard Features: D503 diaphragm pump with 7-Hp Honda • 200 Gallon Tank • 12 Volt hose reel with 135' of 3/4" 600 PSI hose and gun 1A012 Standard Features: D1064 diaphragm pump with 18-HP Honda electric start • 200 Gallon Tank • 12 Volt hose reel with 200' of 3/4" 600 PSI hose and 21" adjustable gun. Best selection for tree spraying.

1) 3C5 Units are standard with a Hypro 6500 Roller Pump. Ideal for general purpose spraying. Standard with a 5.5 HP Honda Engine, 17" adjustable spray gun, relief valve and all necessary fittings and plumbing. Rated to 5 GPM @ 300 PSI. 1a) 5076 Same unit as #1 above with Hypro 7560XLR Roller Pump. Standard with 4.8 HP Honda engine. Rated to 7 GPM @ 300 PSI. 1b) 8015 Same unit as #1 above with Hypro 1502XL Roller Pump. Standard with 7 HP Honda engine. Rated to 21 GPM @ 150 PSI. 2) AR30 Units are standard with a Hypro D403 Diaphragm Pump. Ideal for lawn and low level tree spraying or agricultural weed control. Standard with a 4.8 HP Honda Engine, 17" adjustable spray gun, relief valve and necessary fittings and plumbing. Rated to 10 GPM @ 580 PSI.

Wt. Part No. Gallons Standard Pump HP Lbs. Net Ea. DU 1A021 200 7560XLR Roller 4.8 400 $ 4056.00 DU 1A022 200 1502XL Roller 7.0 425 4770.00 DU 1A000 200 D403 Diaphragm 4.8 400 4409.00 DU 1A001 200 D503 Diaphragm 7.0 550 5058.00 DU 1A012 200 D1064 Diaphragm 20.3 600 7530.00 Note: Side mount reel configuration available; right side rear when viewing pump end. Other Variations also available.

3) AR50 Units are standard with a Hypro D503 Diaphragm Pump. These units are commonly used for tree or lawn spraying. Standard with a 7 HP Honda Engine, 17" adjustable spray gun, relief valve and all necessary fittings and plumbing. Rated to 14 GPM @ 580 PSI.

500 GALLON UNITS

Part No. DU SM500-3C5 DU SM500-5076 DU SM500-8015 DU SM500-AR30 DU SM500-AR50

Standard Pump 6500 Roller 7560XLR Roller 1502XL Roller D403 Diaphragm D503 Diaphragm

D

300 GALLON UNITS Tank 500 Gallon 500 Gallon 500 Gallon 500 Gallon 500 Gallon

Wt. Net Ea. 450 lbs. $ 4446.00 450 lbs. 4800.00 450 lbs. 5673.00 450 lbs. 5159.00 450 lbs. 5738.00

DU SM300-3C5 Standard Features: Hypro 6500 Roller Pump with 4.8 HP Honda • 300 Gallon Tank with Stainless Steel Baffle • Manual hose reel with 300' of 1/2" 600 PSI hose & 17" adjustable gun • Rated to 7 GPM @ 300 PSI. DU SM300-5076 Standard Features: Hypro 7560XLR Roller Pump with 4.8 HP Honda • 300 Gallon Tank with Stainless Steel Baffle • Manual hose reel with 300' of 1/2" 600 PSI hose & 17" adjustable gun • Rated to 7 GPM @ 300 PSI. DU SM300-8015 Standard Features: Hypro 1502XL Roller Pump with 7 HP Honda • 300 Gallon Tank with Stainless Steel Baffle • Manual hose reel with 300' of 1/2" 600 PSI hose & 17" adjustable gun • Rated to 21 GPM @ 150 PSI. DU SM300-AR30 Standard Features: Hypro D403 Diaphragm Pump with 4.8 HP Honda • 300 Gallon Tank with Stainless Steel Baffle • Manual hose reel with 300' of 1/2" 600 PSI hose & 17" adjustable gun • Rated to 10 GPM @ 580 PSI. DU SM300-AR50 Standard Features: Hypro D503 Diaphragm Pump with 7 HP Honda • 300 Gallon Tank with Stainless Steel Baffle • Manual hose reel with 135' of 3/4" 600 PSI hose & 17" adjustable gun • Rated to 14 GPM @ 580 PSI.

—Other Variations Available —

Wt. Part No. Standard Pump Tank Lbs. Net Ea. DU SM300-3C5 6500 Roller 300 Gallon 750 $ 3662.00 DU SM300-5076 7560XLR Roller 300 Gallon 750 4022.00 DU SM300-8015 1502XL Roller 300 Gallon 750 4961.00 DU SM300-AR30 D403 Diaphragm 300 Gallon 750 4408.00 DU SM300-AR50 D503 Diaphragm 300 Gallon 750 4809.00 Note: Side mount reel configuration available; right side rear when viewing pump end. Other variations also available. Hose Roller Assembly & top or bottom mount bracket (DU HRA1) also available.

1A30020 Dual Tank Units Also Available!

DULTMEIER SALES • OMAHA, NE

(800) 228-9666

www.dultmeier.com

• DAVENPORT, IA

(800) 553-6975

E0423


386

3-Point Sprayers & Booms 60 • 110 • 150 • 200 • 300 Gallon 3-Point Sprayers Includes 3-Point Frame with Parking Tank Stand, Tank Saddle and Straps. Order Pump, Boom Controls & Hand Gun Kits Separately

PT60B-ELECT is a 60 Gallon 3-Point Sprayer equipped with: 12 VDC electric demand pump (3.5 GPM up to 45 PSI), poly tank with 5” lid, welded frame constructed from 2” x 3” angle, with Category-1 3-point hitch, plumbing includes hoses, clamps, fittings and line strainer. HAND GUN INCLUDED. LESS BOOM. PT60BRM is a 60 Gallon 3-Point Sprayer equipped with: poly tank with 5” lid, one-piece welded frame constructed from 2” x 3” angle, with Category-1 3-point hitch. The regulator kit is equipped to be used with a roller pump and includes: hoses, clamps, fittings, line strainer, gauge and pressure relief valve. LESS PUMP, BOOM , CONTROL and HAND GUN. PTA110RM is a 110 Gallon 3-Point Sprayer that features: poly tank with 10” lid, bolt-on saddle welded-in tank support, one-piece welded frame with square tubing legs and Category-I 3-point pins. The regulator kit is equipped for use with a manual boom control (SSAA6B-K) and roller pump including: hoses, fittings, hardware, gauge, deluxe nylon strainer, single jet agitator and pressure relief valve. LESS PUMP, BOOM, CONTROL and HAND GUN.

D

PT200R PT60BRM

3-Point Sprayer

(Shown with options: manual controls, handgun kit & boom)

3-Point Sprayer

3-Point Sprayers

Part No. DS PT60B-ELECT DS PT60BRM DS PTA110RM DS PTA150RM DS PT200R DS PT300R DS PT300C

PTA150RM is the same as PTA110RM but is equipped with 150 gallon poly tank. LESS PUMP, BOOM, CONTROL and HAND GUN. PT200R is a 200 Gallon, 3-Point Sprayer that features: poly tank with 10” lid, bolt-on saddle with welded-in tank support, one-piece welded frame with square tubing legs and Category-II 3-point hitch pins. The regulator kit is equipped for use with a manual boom control (SSAA6B-K) and roller pump including: hoses, fittings, hardware, gauge, deluxe nylon strainer, single jet agitator and pressure relief valve. LESS PUMP, BOOM, CONTROL and HAND GUN.

Description Net Ea. 60 Gallon 3-Point Sprayer, 12 Volt................................. $ 549.00 60 Gallon 3-Point Sprayer, Less Pump........................ 500.00 110 Gallon 3-Point Sprayer, Less Pump...................... 1015.00 150 Gallon 3-Point Sprayer, Less Pump...................... 1073.00 200 Gallon 3-Point Sprayer, Less Pump...................... 1589.00 300 Gallon 3-Point Sprayer, Heavy Duty....................... 1698.00 300 Gallon 3-Point Sprayer, Same as PT300R, but works in conjuction with a centrifugal pump.................. 1701.00

Pump Options Part No.

HY 6500CA HY 7560CA HY 1700C HY 1320-77 HY 1323-77

PT300R is a 300 Gallon Heavy Duty 3-Point Sprayer that features: poly tank with 10” lid, bolt-on saddle with welded-in tank support, heavy duty one-piece welded frame constructed for 3” x 3” square tubing and flame-cut arms, Category-II 3-point hitch pins and square legs.The plumbing kit is equipped for use with a roller pump including: hoses, fittings, hardware, gauge, deluxe nylon strainer, single jet agitator and pressure relief valve. LESS PUMP, BOOM, CONTROL and HAND GUN. This unit fits most Quick Hitches.

Description Net Ea. 3/4”, 6 Roller Cast Iron Pump, Less Coupler................ 3/4”, 8 Roller Cast Iron Pump, Less Coupler................ 1”, 5 Roller Cast Iron Pump, Less Coupler................... Standard Coupler, 1-3/8” x 5/8”.................................... Quick Coupler, 5/8”.......................................................

$ 123.70 161.60 254.20 24.55 36.70

Electric & Manual Boom Controls Part No.

DS HY3WV DS SSAA6B-K DS TIRC-1B-K DS GHR-255 DS GHR-25

PT300C is the same as PTA300R but the regulator kit is set up to work in conjunction with a centrifugal pump, which includes 1-1/4” suction hose, 1” discharge hose and larger fittings and valves. LESS PUMP, BOOM, CONTROL and HAND GUN.

Description Net Ea. 3-Section Manual Lever Control with mount...................... $ 178.30 1-Section Manual Lever Control with mount...................... 85.10 3-Section Texas Remcor Control with gauge, regulating valve & (3) solenoid valves with mount........................ 517.00 Hand Gun Kit for 60 Gallon, 3 Pt. Includes 25’ Hose, Gun, 18” Wand, Adjustable Nozzle............... 158.60 Hand Gun Kit for 110 to 300 Gallon, 3 Pt. Includes 25’ Hose, Gun, 18” Wand, Adjustable Nozzle............... 171.70 — Other Pumps & Control Systems Available —

Folding “Break-Away” Booms for 3-Point Sprayers All booms include folding wings & “break-away” fold-back feature. Plumbing is also included with nozzle bodies at 40” or 20” spacing and either Teejet 11/16” nozzle bodies and EVA hose or Teejet “Quickjet” nozzle bodies with diaphragm check valves (top style, 22252 series) and EPDM hose. All booms can accommodate 1 or 3 section control. (Nozzles and caps sold separately).

FBS30 Folding “Break-Away” Boom

Number Nozzle Nozzle Part No. Description Coverage Nozzle Spacing Body Type DS FB10 10’ Coverage Boom** 10’ 3 40” Standard, EVA DS FB14 14’ Coverage Boom** 14’ 4 40” Standard, EVA DS FBS15 15’ Coverage Boom 15’ 9 20” Standard, EVA DS FBQ15 15’ Coverage Boom 15’ 9 20” Quickjet, EPDM DS FBS21 21’ Coverage Boom 21’ 13 20” Standard, EVA DS FBQ21 21’ Coverage Boom 21’ 13 20” Quickjet, EPDM DS FBS30 30’ Coverage Boom 30’ 19 20” Standard, EVA DS FBQ30 30’ Coverage Boom 30’ 19 20” Quickjet, EPDM DS FBQ11BB 43” Coverage Boom 43’ 7@20” + 2 Boomless Quickjet, EPDM * Only Use with 60 Gallon, 3-Pt. Sprayers.

Net Ea. $ 142.50 171.70 287.90 473.20 447.00 553.00 1006.00 1142.00 604.00

— Larger Booms also Available — DULTMEIER SALES • OMAHA, NE

(800) 228-9666

www.dultmeier.com

• DAVENPORT, IA

(800) 553-6975

E0426


H.D. 3-Point Sprayers & Cross Fold Booms

387

300 • 400 • 500 Gallon 3-Point Sprayers for XXL Heavy-Duty Cross Fold Booms Heavy-Duty 3-Point Sprayers are designed to work with the XXL Cross Fold Booms below and include the following: poly tank, complete frame with saddle, straps and parking stand, strainer, agitation in tank and plumbing to pump (Note: pump and controls sold separately). All three sizes fit Category 3, 3N and 4 three point hitches. 3-Point Sprayers for XXL Cross Fold Booms

Part No. DS PT300CE-60 DS PT400CE-60 DS PT500CE-60

3-Point Sprayers 300 Gallon HD 400 Gallon HD 500 Gallon HD

Tank Size & Type 300 Gallon Horizontal 400 Gallon Elliptical 500 Gallon Elliptical

Net Ea. $ 2405.00 2630.00 3124.00

Suggested Pump Options: Part No.

Description

Net Ea.

AC FMC150HYD206 ACE 1-1/2” x 1-1/4” Hydraulic Drive Pump,120 GPM Maximum, 120 PSI Maximum, 7 GPM Oil..................... $ 647.00 HY 9303C-HM4 HYPRO 1-1/2” x 1-1/4” Hydraulic Drive Pump, 115 GPM Maximum, 93 PSI Maximum, 7 GPM Oil....................... 652.00 Many Other Pump Options are Available Call with Application Rate & Speed for Pump Selection Assistance.

Heavy-Duty Self-Leveling XXL Cross Fold Booms • Total Hydraulic Fold & Self-Leveling: Boom is always parallel to ground, even on hillsides (accomplished with (2) sets of charged shocks & torsion isolation mounts). • Raise or Lower Left or Right Sides Separately to go over fences, terraces, ditches. • Spring Loaded Break-Away Boom End Sections return to spray position if obstacle is hit. • All Moving Parts Include Grease Fittings. • Shipped Pre-Assembled & Plumbed with TeeJet QuickJet nozzle bodies at 20” spacing (nozzles sold separately) for quick and easy setup in the field. • 80’ Boom Includes 4 function fasse valve which operates off a single tractor outlet.

Self-Leveling XXL Cross Fold Booms

Part No. Coverage Nozzle Spacing Net Ea. DS SLHFBQ45 45’ 20” $ 5149.00 DS SLHFBQ51 51’ 20” 5698.00 DS SLHFBQ60 60’ 20” 5698.00 DS SLHFBQ80 80’ 20” 10544.00 DS XXLBA3H 3 Point Hitch Adapter * .............................................. 974.00 DS HACS Hydraulic Adjustable Center Section **...................... 835.00 DS XXL485 (4) 8’6” Hydraulic Hoses (for 2 wings), Less Couplers †. 191.40 DS XXL4125 (4) 12’6” Hydraulic Hoses (for 2 wings), Less Couplers # 198.00 DS XXL80H-KIT Hydraulic Hose Kit for 80’ Boom ................................ 118.70 * Only needed when mounting boom to 3 Pt. Hitch without 3-Pt. Sprayer. ** Normally only needed for very high clearance spraying such as cotton. † For 45’, 51’ or 60’ Booms without 3-Point Tank. # For 45’, 51’ or 60’ Booms with 3-Point Tank.

DULTMEIER SALES • OMAHA, NE

(800) 228-9666

Variety of Rate Control Systems (Ground Speed Oriented & Pressure Based) and 12 Volt Manifold Valves are Available —

www.dultmeier.com

Call for Options.

• DAVENPORT, IA

(800) 553-6975

E0877


Air Compressors

388 Vertical Model

Two Stage Air Compressors Type 30, Two-Stage Ingersoll Rand Air Compressors are the worlds number one selling compressors in the 5 to 30 HP range.

Horizontal Model

Features: 100% Cast Iron construction • Provides up to 175 PSI output • Wired and mounted motor starters (except 2340L5 which is not required) • Automatic stop/start control with Nema 1 pressure switch • Relief and manual drain valves • Splash lubrication • Vertical or Horizontal ASME tanks as noted • Continuous duty operation. After coolers and electric drain valves also available as options. Note: Startup Kits are Optional, but gives a 2 year warranty if ordered with units. † Note: Startup Kits are recommended and will extend warranty, but are not included.

D

FREE Freight from Factory on “Two Stage” Models Only to Continental U.S. † Startup Part No. Tank Motor * CFM Rating Kit No.

#54410931 Optional Electric Drain Valve

Wt.

Net Ea.

IR 2340L5 60 Gallon Vertical 5 HP, 1 PH, 230V 14.3 @ 175 PSI 32305880 400 lbs. $ 1359.00 IR 2340L5-3 60 Gallon Vertical 5 HP, 3 PH, 230V 14.3 @ 175 PSI 32305880 400 lbs. 1359.00 IR 2340N5 80 Gallon Vertical 5 HP, 1 PH, 230V 14.3 @ 175 PSI 32305880 475 lbs. 1604.00 IR 2340N5-3 80 Gallon Vertical 5 HP, 3 PH, 230V 14.3 @ 175 PSI 32305880 475 lbs. 1604.00 IR 5N1 80 Gallon Vertical 5 HP, 1 PH, 230V 16.8 @ 175 PSI 32305880 500 lbs. 2171.00 IR 5N3 80 Gallon Vertical 5 HP, 3 PH, 230V 16.8 @ 175 PSI 32305880 500 lbs. 2171.00 IR 2475N7.51 80 Gallon Vertical 7.5 HP, 1 PH, 230V 24.0 @ 175 PSI 32305880 525 lbs. 2365.00 IR 2475N7.53 80 Gallon Vertical 7.5 HP, 3 PH, 230V 24.0 @ 175 PSI 32305880 525 lbs. 2365.00 IR 2545E10V 120 Gallon Horizontal 10 HP, 3 PH, 230V 35.0 @ 175 PSI 32305898 835 lbs. 2788.00 IR 7100E15V 120 Gallon Horizontal 15 HP, 3 PH, 230V 50.0 @ 175 PSI 32305898 1035 lbs. 3773.00 IR 54410931 Automatic Electric Drain Valve As Option..................................................................... 180.80 * 208 & 460 Volt is Available for Most Models. † Not Included But Extends Warranty.

Single Stage Electric Air Compressors Single-Stage Ingersoll Rand Air Compressors are ideally suited for contractors and small shops. Features: Cast iron cylinders and frame • Rated for continuous duty operation • Oil-lubricated, single stage pump • ASME Tanks • Drain, relief and discharge valves • Enclosed belt guard • Fully assembled and prewired • Vertical or Horizontal tanks as noted. Note: Maximum pressure on single stage is 135 PSI. Freight is additional charge on single stage units. Startup Part No. Tank Motor CFM Rating Kit No.

IR P15IUA9 20 Gallon Vertical IR SS3F2-GM 30 Gallon Horizontal IR SS3L3 60 Gallon Vertical IR SS5L5 60 Gallon Vertical † Not Included But Extends Warranty.

2 HP, 1 PH, 115V 2 HP, 1 PH, 115V 3 HP, 1 PH, 230V 5 HP, 1 PH, 230V

5.2 @ 90 PSI 5.9 @ 90 PSI 11.3 @ 90 PSI 18.1 @ 90 PSI

Included † 97338099 † 97338099 Included

Wt.

Net Ea.

200 lbs. 185 lbs. 300 lbs. 310 lbs.

$ 684.00 777.00 666.00 1066.00

† Startup Kits as Add On (Includes Filter Elements & Startup Oil. Included with SS5L5) Part No.

For Models

IR 97338099 IR 32305880 IR 32305898

SS3F2-GM & SS3L3 Single Stage Compressors............. 2340L5, 2340L5-3, 2340N5, 2340N5-3, 5N1, 5N3, 2475N7.51 & 2475N7.53 Two Stage Compressors........... 2545E10V & 700E15V Two Stage Compressors..............

Net Ea.

D

$ 46.45 78.30 86.60

Model SS3L3

Pressure Switch Controls

Compressor Duty Motors

Furnas Pressure Controls are the first choice for contractors, industrial users and others for air compressor applications and water systems. 1/2" conduit openings and ample wiring space, D black finish. Lower female 1/4" MPT connection. U.L. listed. RATING IN HP Single Three Adjusted Factory Phase Phase PSI Diff. PSI Set PSI AC AC Part No. Range Min Max. On/Off 120-V 240-V 240-V GN 3X681 20-100 20 to 60 80/100 1-1/2 2 3 GN 3X682 35-150 30 to 45 95/125 1-1/2 2 3 GN 3X683† 35-150 30 to 45 95/125 1-1/2 2 3 † Model 3X683 Has Built-in Unloader Valve to reduce starting Load.

Part No. CE 110160 CE 110161 CE 110222

Part No. GN 3X681 GN 3X682 GN 3X683 Net Ea. $ 30.45 $ 33.30 $ 35.30 DULTMEIER SALES • OMAHA, NE

(800) 228-9666

Motors designed for air compressor, pump, and fan and blower duty applications which require high breakdown torque and rugged mechanical construction. Open construction with reverse ventilation exhausting air at shaftend which minimizes contaminants from entering motor. Wired for CW rotation facing lead end. They may be reconnected for CCW rotation.

HP 1 1-1/2 3

www.dultmeier.com

RPM 3600 3600 3600

Voltage 115/230 115/230 230

• DAVENPORT, IA

D

D

Frame F56 G56 H56

Shaft 5/8" 5/8" 5/8"

(800) 553-6975

Wt. Net Ea. 29 lbs. $ 219.00 34 lbs. 239.00 38 lbs. 280.00

E0514


Engines

389

PowerPro™ Gasoline Pump Engines High Quality, Field-Proven Engine FEATURES:

D

• • • • • • • •

D

PowerPro™ 2543-0045 6.5 HP Engine

PowerPro™ 2543-0043 2.5 HP Engine

Some Sample Engine Configurations

HP Shaft Part No. Rating Type 2549-0043 2.5 HP 5/8” Keyed 2543-0045 6.5 HP 3/4” Keyed 2541-0053 6.5 HP 3/4” Keyed 2543-0046 6.5 HP 5/8” Threaded 2541-0048 13.0 HP 1” Keyed 2541-0049 13.0 HP 1” Keyed 2541-0050 13.0 HP 1” Thrd. 2541-0051 13.0 HP 1” Thrd.

D

D

D

Hypro Poly Transfer Pump powered by a PowerPro™ Engine

Hypro Centrifugal Pump powered by a PowerPro™ Engine

Will work with the following Hypro Products: Diaphragm, Roller, Piston, Plunger Pumps Transfer & Diaphragm Pumps Centrifugal Pumps Centrifugal Pumps Transfer, Diaphragm, Plunger Pumps Transfer, Diaphragm, Plunger Pumps Centrifugal Pumps Centrifugal Pumps

Part No. HP Shaft HY 2549-0043 2.5 5/8” Keyed, Recoil HY 2541-0045 * 6.5 3/4” Keyed, Recoil HY 2543-0046 * 6.5 5/8” Threaded, Recoil HY 2541-0053 6.5 3/4” Keyed, 12V Starter HY 2541-0048 13.0 1” Keyed, Recoil HY 2541-0049 13.0 1” Keyed, 12V Starter HY 2541-0050 13.0 1” Threaded, Recoil HY 2541-0051 13.0 1” Threaded, 12V Starter

D

Hypro Plunger Pump powered by a PowerPro™ Engine

Wt. 36 lbs. 40 lbs. 40 lbs. 47 lbs. 73 lbs. 80 lbs. 73 lbs. 80 lbs.

Net Ea. $ 201.00 322.60 190.00 411.10 616.00 722.00 616.00 714.00

* EPA Certified Only. Cannot Use in California

Horizontal Shaft Engine

Intek Series Engine

WITH REWIND STARTER

6.5 HP 122052-0549 Intek Gear Reduction: Crankshaft is 3/4" Diameter x 2" length, 3/16" Keyway. Features: 6:1 Gear Reduction (CCW) Rotation • Overhead valve design (OHV) • DuraBore™ Cast Iron Cylinder Sleeve • Remote, manual or adjustable throttle control • Dual-Clean™ automotive-type pleated paper air filter with pre-cleaner • Float carburetor for consistent easy starting • Rewind Starter • Low oil sensor device.

3.5 HP

Model 93302-1016 3300 RPM Max. governor speed. Crankshaft: 3/4" Diameter, Keyway, tapped1/4"-28.2.56"Bore,1-3/4Stroke, 9.02-CID. Aluminum Alloy bore, Magnetron electronic ignition. Pleated automotive type air cleaner. Counterclockwise rotation viewed from PTO side.

Start Type Recoil Recoil Electric Recoil Recoil Electric Recoil Electric

Hypro Cast Iron Transfer Pump powered by a PowerPro™ Engine

D

Hypro Diaphragm Pump powered by a PowerPro™ Engine

2.5, 6.5, 9 and 13 Horsepower Models Overhead Valve Low-Oil Sensor Engines Cannot Ship by UPS due to EPA & CARB Certified Concerns with Damage in Shipment Repair Parts Available One-Year Warranty Threaded or Keyed Shafts As Shown For Close Coupled Pump Applications

D

D

Application: Universal replacement engine for mixers, rollers, pumps, etc.

123352-0049

Gear Reduction INTEK Engines Part No. Type RP 93302-0016

Part No.

HP Wt. Net Ea. 3.5 28 lbs. $ 212.50

Wt.

(800) 228-9666

Wt.

Net Ea.

76 lbs.

CALL

We can supply Briggs & Stratton replacement engines for most centrifugal pump applications. The engine shaft & mounting must match. Please supply the existing engine model and type number when ordering.

PUMP ENGINE Bolt-Circle Dimensions

Part No.

Net Ea.

Type

RP 91232-1035

RP 121352-0049 † 6.5 3/4" 47 lbs. $ 356.60 † Intek Engine has Top Mounted Fuel Tank. DULTMEIER SALES • OMAHA, NE

Crankshaft

6.5 3/4" Diameter

Replacement Pump Engine

These 6:1 Gear-Reduction Engines are ideal where equipment requires rotation at standard tractor PTO speeds. Fully enclosed internal reduction gear. CCW rotation as viewed from PTO. Rewind Starters.

PTO Part No. Type HP Diameter

HP

RP 122052-0549

6:1 Gear Reduction Engine

D

Type

www.dultmeier.com

HP

3/4” Dia. with Keyway, Tapped 5/16”-24............... 3.5

• DAVENPORT, IA

(800) 553-6975

Wt.

Net Ea.

28 lbs. $ 255.60

E0764


4-Cycle Engines

390

HONDA Overhead Valve Engines From 4 to 22 HP. Overhead valve design delivers exceptional performance while keeping size and weight to a minimum. Built with a full range of features to keep them running for a long time. Honda’s superior four-stroke technology includes: • Cast Iron cylinders • Ball bearing supported forged crankshaft • Chrome top piston ring • Mechanical governor • Fixed jet float type carburetor • Replaceable valve guides and automatic decompression for easy starting • “Oil Alert” system which shuts down the engine if oil supply reaches an unsafe level • Transistorized ignition systems on all except 11 & 13 HP models which have CDI systems with Electronic Advance. Note: Honda has revised the advertised horse power ratings to comply with the more conservative SAEJ1349 standards. For optimum performance and safety, we recommend you read the Owner's Manual before operating your Honda Power Equipment.

OIL ALERT™ SYSTEM

Honda’s Oil Alert™ System offers added protection for your Honda engine. It shuts off the engine automatically before the oil level in the crankcase falls below the safe limit. Honda’s Oil Alert is a simple, reliable means of preventing engine problems and assuring your engine of more time on the job.

Horizontal Shaft Engines 7.9 to 22.1 HP

Overhead Valve Engines 3.5 • 4.8 • 5.5 H.P. Rewind Starters HORIZONTAL-SHAFT

GX340

TX Series - Ideal for use as a Replacement Pump Engine

GX240 7.9-HP & GX270 8.4-HP Series (270cc) Overhead valve style. Mid-size all purpose engine. All standard Honda features plus a transistorized ignition system, dual oil fillers, bottom intake air-cleaner and exclusive oil alert feature. Fuel tanks are 6.4 Qt. GX240K1QA Standard Model: With Rewind Starter. GX240K1QAE Electric Start Model: With 12-Volt starting system. GX240K1HA Gear Reduction Engine: Features a fully enclosed 6 to 1 internal reduction gear. PTO is 3-15/64 x 1". GX270QAE2 Standard Model: With 12 Volt starting system. GX270PA2 Standard Model: Pump engine, 1” threaded shaft.

D

GX340 10.7-HP Series (389cc)

GX120

OHV Style. All Honda standard features plus transistorized ignition system, dual oil fillers, rewind starters, bottom intake air cleaner and oil alert feature.

3.5-HP GX120 Series (118cc) GX120K1QX: Has a 3/4" O.D. Keyed shaft, drilled & tapped 5/16"-24.

4.8-HP GX160 Series (163cc)

Overhead valve style. Includes all standard Honda features plus dual-element air cleaner, synchro balancer, CDI ignition with electronic advance and oil alert feature. Fuel tanks are 7.4 Qt. Crankshaft: 1" diameter , keyed and tapped 7/16"-20. GX340K1QA Standard Model: With rewind starter. GX340K1QAE Electric Start Model: With a 12-Volt starting system.

GX390 11.7-HP SERIES (389cc)

GX160K1QX: Has a 3/4" O.D. Keyed shaft, drilled & tapped 5/16"-24. GX160K1QXE: Same as GX160K1QX except with electric start. GX160K1TX: Pump Engine has a 5/8"-18 threaded shaft and mounting flange for use with close-coupled Centrifugal pumps. GX160K1HX: Has a 6:1 Gear Reduction with 3/4" O.D. Keyed shaft.

The largest of Honda’s single cylinder industrial engines. All standard Honda features plus CDI ignition w/electronic advance, oil alert feature and automatic decompression release. Fuel tanks are 7.4 Qt. Crankshaft: 1" diameter tapped 3/8-24 UNF with keyway. GX390K1QA Standard Model: With rewind starter. GX390K1QAE Electric Start Model: With a 12-Volt starter.

5.5-HP GX200 Series (196cc) GX200QX2: Has a 3/4" O.D. Keyed shaft, drilled & tapped 5/16"-24. GX200UTQXE2: Has a 3/4” O.D. Keyed shaft with an electric start. GX200HX2: Has a 6:1 Gear Reduction with 3/4" O.D. Keyed shaft. Part No. H.P. AE GX120K1QX 3.5 AE GX160K1QX 4.8 AE GX160K1QXE *4.8 AE GX160K1TX 4.8 AE GX160K1HX 4.8 AE GX200QX2 5.5 AE GX200UTQXE2 *5.5 AE GX200HX2 5.5 *Has Electric Start.

Engine Style Standard Standard Standard Centrifugal Pump Gear Reduction Standard Standard Gear Reduction

Crankshaft 3/4" with Keyway 3/4" with Keyway 3/4" with Keyway Threaded 5/8"-18 3/4" with Keyway 3/4" with Keyway 3/4” with Keyway 3/4" with Keyway

V-Twin Engines (688cc) GX630RQZB2 20.3 HP & GX690RTXA2 22.1 HP The largest of Honda’s industrial engines. All standard Honda features plus Full-flow Oil Filter, 12-Volt starter, fuel pump, CDI ignition w/electronic advance, oil alert shut-down and 20 amp charging system.

Wt. Net Ea. 29 lbs. $ 302.00 34 lbs. 318.20 34 lbs. 502.00 33 lbs. 348.50 39 lbs. 479.80 36 lbs. 332.30 36 lbs. 595.00 41 lbs. 515.00

These engines do not include fuel tank or exhaust system see options below.

Muffler Options: High mount left outlet (VHLM6), high mount right outlet (VHRM6).

Part No. H.P. Crankshaft Starter Wt. Net Ea. AE GX240K1QA 7.9 1" Diameter Rewind 49 lbs. $ 550.00 AE GX240K1QAE 7.9 1" Diameter 12-Volt 72 lbs. 720.00 AE GX240K1HA 7.9 Gear Reduction Rewind 75 lbs. 670.00 AE GX270QAE2 8.4 1” Diameter 12-Volt 62 lbs. 739.00 AE GX270PA2 8.4 1” Threaded Rewind 56 lbs. 636.00 AE GX340K1QA 10.7 1" Diameter Rewind 73 lbs. 617.00 AE GX340K1QAE 10.7 1" Diameter 12-Volt 79 lbs. 743.00 AE GX390K1QA 11.7 1" Diameter Rewind 73 lbs. 585.00 AE GX390K1QAE 11.7 1" Diameter 12-Volt 79 lbs. 787.00 AE GX630RQZB2 20.3 1" Diameter Electric 101 lbs. 1302.00 AE GX690RTXA2 22.1 1-1/8” Diameter Electric 98 lbs. 1496.00 AE VHLM6 Muffler, Left Side 630/690 Series..................... 137.40 AE VHRM6 Muffler, Right (Oil Filter Side)630/690 Series... 137.40

To Deliver the Best Possible Service to Our Customers, Dultmeier Sales Strives to Live Up to A Set of Core Values, “Accountability”

Accept responsibility for meeting commitments & fulfilling expectations

DULTMEIER SALES • OMAHA, NE

(800) 228-9666

D

GX690 22.3-HP Series

Engines Cannot Ship by UPS due to Concerns with Damage in Shipment

One of Which is

D

www.dultmeier.com

• DAVENPORT, IA

(800) 553-6975

E0502


Gas Engine Replacement Parts

391

Common replacement parts for GX Series Gas Engines. Aftermarket parts fit most Honda, Power-Pro and other similar gas engines in the market. Items shown are the most commonly used repair parts, but many other parts are also available. Quantity Discounts Available.

Fuel Caps

D

Part No.

Chrome Description Net Ea.

MC 40711H MC 40714H

Fuel Cap, Poly with Gasket. Fits all GX Series Models $ 2.64 Fuel Cap, Chrome with Gasket. Fits all GX Series.. 4.87

Recoil Starters

Part No.

MC 43501H MC 43503H MC 43505H

Note: Black Recoil Also Available.

Part No.

Description Net Ea.

MC 43154H MC 43102H MC 43103H MC 420618

Recoil Starter. Fits GX120/160/200 Series, Red.... $ 18.10 Recoil Starter. Fits GX240/270 Series, Red........... 21.80 Recoil Starter. Fits GX340/390 Series, Red........... 21.80 Metal Pawl............................................................. 3.41

Fuel Tank Assemblies

Part No.

MC 420808 MC 420806

Part No.

MC 43621H MC 43622H MC 43625H MC 43626H

Note: Black Fuel Tanks Also Available.

Description Net Ea.

MC 40705H Fuel Tank Assembly, GX120 Series, White.............. $ 23.60 MC 40706H Fuel Tank Assembly, GX140/160/200 Series, White 22.45 MC 40708H Fuel Tank Assembly, GX240/270/340/390 Series, White... 31.90 MC 99FTV Valve, All Fuel Tanks - All Models........................... 3.54 Note: Tank, Cap, Filter are all included in all assemblies.

Part No.

MC 44910H MC 44911H MC 44912H MC 44913H MC 44914H MC 44915H

MC 44901H MC 44902H MC 44903H MC 420297 MC 44954H MC 44906H MC 44907H

Part No.

D

MC 43304H MC 43305H MC 43306H

Part No.

MC 40106H MC 40133H MC 40107H MC 40134H

Description Net Ea.

MC 43004H MC 43005H MC 43006H

Description Net Ea.

Ignition Coil, GX120/160/200 Series....................... $ 9.73 Ignition Coil, GX240/270/340 Series....................... 10.40 Ignition Coil, GX390 Series..................................... 10.40

MC 45011H MC 45013H MC 45015H MC 45016H MC 45017H MC 45018H

D

Description Net Ea.

Description Net Ea.

Air Filter, GX140/160/200 Series............................. $ 5.22 Air Filter, GX240/270 Series.................................... 8.00 Air Filter, GX340/390 Series.................................... 8.84 - Complete Air Filter Assemblies Also Available -

(800) 228-9666

Description Net Ea.

Gasket Kit Assembly, GX160 Series........................ $ 3.41 Gasket Kit Assembly, GX200 Series........................ 5.54 Gasket Kit Assembly, GX240 Series........................ 6.04 Gasket Kit Assembly, GX270 Series........................ 6.59 Gasket Kit Assembly, GX340 Series........................ 6.59 Gasket Kit Assembly, GX390 Series........................ 6.59

Miscellaneous Common Parts

D

DULTMEIER SALES • OMAHA, NE

Description Net Ea.

Fan Cover Shroud, GX160 Series............................ $ 9.75 Fan Cover Shroud, GX200 Series............................ 9.75 Fan Cover Shroud, GX240/270 Series.................... 19.05 Fan Cover Shroud, GX340/390 Series.................... 19.05

Gasket Kit Assemblies

Throttle Assembly, GX140/160/200 Series............. $ 4.16 Throttle Assembly, GX240/270 Series.................... 7.54 Throttle Assembly, GX340/390 Series.................... 9.04

Air Filters Part No.

Description Net Ea.

Connecting Rod, GX160 Series............................... $ 7.04 Connecting Rod, GX200 Series............................... 7.04 Connecting Rod, GX240/270 Series....................... 14.75 Connecting Rod, GX340/390 Series....................... 14.75

Fan Cover Shrouds

Carburetor Repair Kit, GX120 Series...................... $ 7.20 Carburetor Repair Kit, GX160 Series...................... 7.20 Carburetor Repair Kit, GX200 Series...................... 7.20 Carburetor Repair Kit, GX240 Series...................... 7.84 Carburetor Repair Kit, GX270 Series...................... 7.84 Carburetor Repair Kit, GX340 Series...................... 7.84 Carburetor Repair Kit, GX390 Series...................... 7.84

Throttle Assemblies MC 40128H MC 40130H MC 40131H

D

Description Net Ea.

Carburetor Assembly, GX160 Series....................... $ 18.75 Carburetor Assembly, GX200 Series....................... 18.75 Carburetor Assembly, GX240 Series....................... 31.30 Carburetor Assembly, GX270 Series....................... 31.30 Carburetor Assembly, GX340 Series....................... 32.55 Carburetor Assembly, GX390 Series....................... 32.55

Part No.

Part No.

Description Net Ea.

Muffler Gasket, 1 Each, GX160/200 Series............. $ 1.77 Muffler Gasket, 6 Pack, GX240/270/340/390 Series........ 2.91

Ignition Coils

Carburetor Repair Kits Part No.

Muffler Assembly, GX120/160/200 Series.............. $ 13.75 Muffler Assembly, GX240/270 Series..................... 27.90 Muffler Assembly, GX340/390 Series..................... 31.30

Connecting Rods

D

Carburetor Assemblies

D

Description Net Ea.

Muffler Gaskets

D

#420618 with #43154H

Part No.

Muffler Assemblies

Poly

D

Part No.

Description Net Ea.

MC 43312H MC 43342H MC 5COIL MC 6COIL MC 420802 MC 43514H

On-Off Switch with Wires, All Models..................... $ 1.77 Spark Plug, All GX Series........................................ 3.11 55” Rope & Handle, GX120/160/200 Models......... 6.36 55” Rope & Handle, GX240/270/340/390 Models.. 6.77 Starter Spring, Pack/6. GX240/270/340/390 Models... 26.05 Exhaust Pipe. GX240/270/340/390 Models............ 8.33

www.dultmeier.com

• DAVENPORT, IA

(800) 553-6975

E1130


Motors

392

Motors

C-Face Motors

1725 RPM

TOTALLY ENCLOSED Single & Three Phase

Single Phase Totally Enclosed Ball Bearing, Totally-Enclosed. Fan-Cooled. 60 Hertz.

D

Single Phase, General Purpose Motors from Leeson Electric. Standard Features include high quality, welded steel construction, capacitor start, lubricated bearings, rigid base and solid shafts. Totally Enclosed and Fan Cooled design allows for use in a wide variety of applications and environments. Rated at 1725 RPM and 115, 208 or 230 volt as noted. (Open Drip Proof motors are also available). Shaft Full Load Amps Part No. H.P. Dia. Volts @ 230V Frame Wt. Net Ea. CE 100955 1/3 1/2" 115/208-230 3.3 48 19 lbs. $ 192.00 CE 102909 1/2 5/8" 115/208-230 4.4 56 25 lbs. 205.00 CE 110022 3/4 5/8" 115/208-230 5.4 56 29 lbs. 306.00 CE 110023 1 5.8” 115/208-230 6.4 56 29 lbs. 275.00 CE 120008 1 7/8" 115/208-230 6.4 143T 31 lbs. 337.00 CE 113333 1-1/2 5/8” 115/208-230 8.6 56H 38 lbs. 336.00 CE 120009 1-1/2 7/8" 115/208-230 8.6 145T 42 lbs. 336.00 CE 120867 2 7/8" 115/208-230 9.2 145T 48 lbs. 385.00 CE 131541 * 2 1-1/8” 115/208-230 12.4 182T 50 lbs. 462.00 CE 131533 3 1-1/8" 115/208-230 16.8 184T 83 lbs. 576.00 CE 131538 5 1-1/8" 230 23.0 184T 95 lbs. 702.00 CE 140120 7-1/2 1-3/8" 230 33.6 215T 169 lbs. 910.00 CE 140581 * 10 1-3/8" 230 40.0 215T 179 lbs. 1046.00 * Farm Duty High Torque Design.

D

C-Face Motors from Leeson Electric. Welded steel construction. Capacitor start on single phase motors. Totally Enclosed, Fan Cooled. Designed for direct mounting of pumps, speed reducers, machine tools, etc. Lubricated bearings and rigid mounting bases are standard. 115, 208, 230 or 430 volt as noted. (Open Drip Proof motors are also available).

Motors

Three-Phase - TEFC 1800 RPM Three Phase, General Purpose Motors D from Leeson Electric. Standard features include welded steel construction, lubricated bearings, rigid mounting bases and solid shafts.Totally Enclosed, Fan Cooled. These motors also feature the IRIS insulation system which protects motors from voltage spikes. All motors 1 HP or above meet or exceed EPACT standards for added operating efficiencies. (Open Drip Proof motors are also available). Full Load Amps Wt. Part No. H.P. RPM Volts @ 230V Frame Lbs. Net Ea. CE 100443 * 1/3 1800 208/230/460 1.4 48 19 $ 193.00 CE 100913 1/2 1800 208/230/460 2.0 S56 24 209.00 CE 120921 1 1800 208/230/460 3.1 143T 31 364.00 CE 120922 1-1/2 1800 208/230/460 4.4 145T 36 379.00 CE 120923 2 1800 208/230/460 5.6 145T 46 394.00 CE 131463 3 1800 208/230/460 8.2 182T 68 445.00 CE 131464 5 1800 208/230/460 13.0 184T 80 486.00 CE 170157 7-1/2 1800 208/230/460 19.2 213T 153 694.00 CE 170140 10 1800 208/230/460 25.2 215T 176 829.00 CE 170066 15 1800 208/230/460 37.0 254T 284 1040.00 CE 170007 20 1800 208/230/460 48.0 256T 321 1335.00 CE 170011 25 1800 208/230/460 58.8 284T 370 1636.00 CE 170015 30 1800 208/230/460 70.0 286T 423 1906.00! CE 170019 40 1800 208/230/460 93.0 324T 528 2530.00 CE 170023 50 1800 208/230/460 118 326T 590 3056.00 * Totally Enclosed Non Vented.

Motors High Speed Single & Three-Phase Totally Enclosed Fan Cooled

D

High Speed Motors from Leeson Electric. These motors have the same features as the Single and Three Phase motors shown above. Rated from 3450 to 3550 RPM for use with high speed pumps, reducers, fans, compressors, etc. 2 - 40 HP motors are shown but larger sizes are available.

DULTMEIER SALES • OMAHA, NE

Motors 2 HP or Larger Cannot Ship by UPS Due to Concerns with Damage in Shipment.

Full Load 1800 RPM Amps Wt. Part No. HP Phase RPM Volts @ 230V Frame Lbs. Net Ea. CE 103085 1/2 1 1800 115/208/230 4.0 S56C 22 $ 257.00 CE 110905 3/4 1 1800 115/208-230 5.4 56C 26 322.00 CE 110908 1 1 1800 115/208-230 6.4 56C 30 351.00 CE 110910 1-1/2 1 1800 115/208-230 8.6 56HC 39 411.00 CE 120274 2 1 1800 115/230 9.2 145TC 49 563.00 CE 131631 3 1 1800 115/208-230 16.8 184TC 84 796.00 CE 131633 5 1 1800 230 23.0 184TC 86 832.00 CE 140807 7-1/2 1 1800 208/230 33.0 215TC 141 958.00 CE 140678 10 1 1800 230 40.0 213TC 152 1083.00 CE 131504 3 3 1760 208-230/460 8.2 182TC 68 514.00 CE 131502 5 3 1760 208-230/460 13.0 184TC 99 559.00 CE 140521 7-1/2 3 1800 208-230/460 21.0 213TC 144 638.00 CE 140522 10 3 1800 208-230/460 27.0 215TC 160 770.00 Full Load 3600 RPM Amps Wt. Part No. HP Phase RPM Volts @ 230V Frame Lbs. Net Ea. CE 102903 1/2 1 3600 115/208-230 3.5 S56C 22 $ 201.00 CE 112135 3/4 1 3600 115/208-230 5.0 56C 26 229.00 CE 110180 1 1 3600 115/208-230 6.0 56C 28 264.00 CE 115024 1-1/2 1 3600 115/208-230 6.2 56C 35 358.00 CE 113931 2 1 3600 115/208-230 10.0 56HC 46 380.00 CE 121008 2 1 3600 115/208-230 10.0 145TC 43 446.00 CE 115048 3 1 3600 208-230 14.0 56HC 53 466.00 CE 121060 3 1 3600 230 13.0 145TC 51 501.00 CE 131632 5 1 3600 230 19.8 184TC 103 799.00 CE 140694 7-1/2 1 3600 208-230 32 213TC 120 938.00 CE 140695 10 1 3600 208-230 40.0 215TC 138 1118.00 CE 110181 1 3 3600 208-230/460 3.2 56C 24 272.00 CE 111273 ** 2 3 3600 208-230/460 5.6 56C 36 316.00 CE 111630 ** 3 3 3600 208-230/460 8.0 56C 37 360.00 CE 121929 3 3 3500 208-230/460 7.4 145TC 35 507.00 CE 171446 5 3 3600 208-230/460 12.0 184TC 90 632.00 CE 140769 10 3 3600 208-230/460 24 215TC 115 822.00 CE 171586 15 3 3600 208-230/460 35 254TC 161 1239.00 ** No Mounting Base.

Shaft Amps Wt. Part No. HP RPM Phase Size Frame Volts @ 230V Lbs. Net Ea. CE 110352 2 3600 1 5/8" 56H 115/208/230 10.0 41 $ 422.00 CE 121519 2 3600 3 7/8" 145T 208-230/460 5.2 45 413.00 CE 131637 3 3600 1 1-1/8" 182T 115/208/230 13.4 78 505.00 CE 131985 3 3600 3 1-1/8" 182T 208-230/460 7.6 65 511.00 CE 131549 5 3600 1 1-1/8" 184T 230 19.8 93 699.00 CE 131987 5 3600 3 1-1/8" 184T 208-230/460 12.0 96 574.00 CE 140684 7-1/2 3600 1 1-3/8" 213T 208-230 32.0 120 898.00 CE 140756 7-1/2 3450 3 1-3/8" S213T 208-230/460 16.8 101 691.00 CE 140685 10 3600 1 1-3/8" 215T 208-230 41.5 138 1102.00 CE 170159 10 3600 3 1-3/8" 215T 208-230/460 23.6 180 866.00 CE 170062 15 3600 3 1-5/8" 254T 208-230/460 35.0 260 1090.00 CE 170033 20 3600 3 1-5/8" 256T 208-230/460 46.2 296 1332.00 CE 170035 25 3600 3 1-5/8" 284TS 208-230/460 58.2 350 1731.00 CE 170037 30 3600 3 1-5/8" 286TS 208-230/460 69.2 425 2101.00 CE 170039 40 3600 3 1-7/8" 324TS 208-230/460 93.0 510 2549.00 Note: Explosion-Proof Models also Available.

(800) 228-9666

www.dultmeier.com

• DAVENPORT, IA

(800) 553-6975

E0496


Motors & Baseplates

393

LEESON Compressor Duty Motors

Aeration Fan Motors

Motors designed for air compressor, pump, and fan and blower duty applications which require high breakdown torque and rugged mechanical construction. Open construction with reverse ventilation exhausting air at shaft-end which minimizes contaminants from entering motor. Wired for CW rotation facing lead end. They may be reconnected for CCW rotation.

Single & Three Phase 3/4 - 2 HP Construction Features: Ball Bearing • Totally-Enclosed • Air Over • Reversible • Rigid Base • Capacitor Start • 3450 RPM • Motors are used as original equipment • Can be used as direct replacements where NEMA frame numbers and horsepower ratings correspond.

D

Part No. H.P. Phase CE 111332 3/4 1 CE 111334 3/4 3 CE 111333 1 1 CE 111335 1 3 CE 120374 1-1/2 1 CE 120377 1-1/2 3 CE 120378 2 3 CE 120379 3 3

D D

Part No. CE 110160 CE 110161 CE 110222

HP 1 1-1/2 3

RPM 3600 3600 3600

Voltage 115/230 115/230 230

Frame F56 G56 H56

Shaft 5/8" 5/8" 5/8"

Wt. Net Ea. 29 lbs. $ 219.00 34 lbs. 239.00 38 lbs. 280.00

WASHGUARD® Motors

Motor/Pump Baseplates

for Washdown Service

Leeson “WashGuard” Motors for wet environment “Washdown” service. The ideal choice for wet, humid areas. All motors feature white, epoxy coating for maximum corrosion resistance (USDA approved). Stainless steel shaft and fan guard are also standard. Moisture resistant interior coatings protect against moisture and corrosion. All motors shown are Totally Enclosed, Fan Cooled with C-face bolt pattern. Single phase motors feature an electronic, solid-state, encapsulated switch. Note: Other RPM speeds, frame sizes and horsepower ratings are available on request.

1430 & 1796

BP1230H

with handle D

D

Full Load Amps Shaft Wt. Volt. @230V Size Frame Lbs. Net Ea. 115/230 5.0 5/8" 56 27 $ 200.00 208-230/460 2.4 5/8" 56 21 231.00 115/230 6.0 5/8" 56 28 201.00 208-230/460 3.2 5/8" 56 27 241.00 115/230 8.5 7/8" M143T 40 270.00 208-230-460 4.2 7/8" 143T 30 227.00 208-230/460 5.6 7/8" 145T 35 260.00 230/460 8.0 7/8" 145T 40 302.00

WASHGUARD® WHITE EPOXY D

1980A

Hand Carry

BP1230 & BP1630

D

D

Baseplate

1-Phase Motors SINGLE PHASE

D

Belt Guard

HP

Frame

Part No.

HP

Frame

CE 112429 1/2 CE 191949 * 1/2 CE 112430 3/4 CE 112524 1 CE 112643 1-1/2 CE 119483 2

Heavy Gauge Steel or Stainless Steel Baseplates for mounting pumps to motors or engines. All units shown are painted and ready for drilling. Baseplates are available as plates only, plates with handles or plates with wheels. Wt. Part No. Description Size Gauge Lbs. HY 1510-2 Baseplate only, Painted 9.5" W x 18" L 3/16" 7 DS BP1230 Baseplate only, Painted 12" W x 30" L 3/16" 27 DS BP1230H Baseplate w/handles, Painted 12" W x 30" L 3/16" 29 DS BP1630 Baseplate only, Painted 16" W x 30" L 3/16" 73 DS BP1630SS Baseplate only, Stainless 16" W x 30" L 10 ga. 27 DS BP1830SS Baseplate only, Stainless 18" W x 30" L 10 ga. 39 DS BP1830 Baseplate only, Painted 18” W x 30” L 3/16” 37 DU BP4216 Baseplate only, Painted 16" W x 42" L 3/8” 91 DU BP4224 Baseplate only, Painted 24" W x 42" L 3/8” 94 DU BP4222S Baseplate only, Stainless 22" W x 42" L 3/8” 94 DU BP5222 Baseplate only, Painted 22" W x 52" L 3/8" 154 DU BP5218 Baseplate only, Painted 18” W x 51” L 1/2” 176 DU BP5621 Baseplate only, Painted 21” W x 56” L 1/2” 195 DU 1796 Baseplate, Aluminum with Wheels.................. 10" W x 15" L 11 ga. 15 DU 1430 Baseplate, Aluminum with Wheels................. 10" W x 20" L 11 ga. 19 DU 1980A Aluminum, Hand Carry 12.5" W x 14" L 14 ga. 5 DU BG250SS * Belt Guard, Stainless, 23" L x 11" H.............................. DU BG305SS * Belt Guard, Stainless, 30" L x 15" H.............................. * Solid Belt Guard Cover will need to be cut out for shafts.

56C 56C 56C

56C 56C 56C 56C 56C 56C

RPM

1725 1725 1725 RPM

1725 1750 1725 1725 1725 1725

Voltage

115/208-230 115/208-230 115/208-230 Voltage

208-230/460 208-230/460 208-230/460 208-230/460 208-230/460 208-230/460

Wt.

Net Ea..

Wt.

Net Ea.

27 lbs. $ 306.00 30 lbs. 350.00 34 lbs. 403.00 29 lbs. $ 313.00 33 lbs. 310.00 30 lbs. 371.00 31 lbs. 378.00 36 lbs. 404.00 38 lbs. 575.00

* All Stainless, Fits Water Wizard 1.0 & 2.0. Net Ea. $ 28.15 52.90 82.85 90.00 201.50 211.10 82.50 183.60 180.30 352.50 281.30 278.30 CALL 97.35 109.60 47.50 108.10 158.10

Motors 2 HP or Larger Cannot Ship by UPS due to Concerns with Damage in Shipment

DULTMEIER SALES • OMAHA, NE

Part No.

CE 112527 1/2 CE 112528 3/4 CE 112529 1 THREE PHASE

BG250SS & BG305SS

3-Phase Motors

(800) 228-9666

Adjustable Steel Motor Bases Simplify Mounting and Belt Tension Adjustment D

One-piece steel mounting bases have single adjusting bolt to position mounted motor for proper belt tension during initial installation and at later maintenance checks. Four motor mounting bolts included. Not for ceiling or sidewall installations. Gray finish.

FOR NEMA Bolt Part No. FRAME NO.’S Wide Long Size GN 3M276 56 6-1/2" 10-5/8" 5/16" GN 3M277 143T 7-1/2" 10-1/2" 5/16" GN 3M278 145T 8-1/2" 10-1/2" 5/16" GN 3M279 182T/182 9-1/2" 12-3/4" 3/8" GN 3M280 184T/184 10-1/2" 12-3/4" 3/8" GN 3M281 213T, 213 11" 15" 3/8" GN 3M282 215T, 215 12-1/2" 15" 3/8" GN 2M512 254T 15-1/8" 17-3/4" 1/2" GN 2M513 256T 16-7/8" 17-3/4" 1/2" GN 2M514 284T 16-7/8" 19-3/4" 1/2" GN 2M515 286T 18-3/8” 19-3/4” 1/2” GN 2M516 324T 19-1/4” 22-3/4” 5/8”

www.dultmeier.com

• DAVENPORT, IA

(800) 553-6975

Net Ea. $ 40.35 56.55 58.10 70.20 61.50 54.05 67.20 169.70 168.20 171.70 184.40 252.50

E0498


Motors • Gear Reducers

394

Carbonator Pump Motors Designed for close-coupled pump applications. Ideal for compact pump/ motor appli­cations. Slotted 5/8" shafts are designed to accept flat-shaft pumps such as Procon or Rotoflow brands. Specifications: 1-Phase, Open-Dripproof • 1725 RPM • Rated for continuous duty • Automatic overload protection • Frames are 48YZ • Rotation can easily be changed in the field if required. Part No.

Size

CE 931 1/3 HP CE 932 1/2 HP CE 933 3/4 HP

GEAR REDUCERS Cast Iron Gear Reducers from Leeson. These gear reducers are interchangeable with Baldor, Boston, Browning, Falk, Grove and many other “industry standard” reducers. Standard Features: Viton®, double-lip seals for resistance to temperature, abrasion and chemicals • Bronze worm gear designed for maximum strength and superior life • Tapered roller bearings • Single piece, case hardened input worm shaft.

D

Voltage

Amp Rating

115 115/230 115/230

5.6 7.2/3.6 10.4/5.2

Wt.

BMQ Reducers priced below are standard with Nema 56C input flange, 20:1 ratio and left hand shaft. Many other configurations of gear reducers are available. Note: Gear reducers are sold less motors but motors are available also or in gearbox/motor combinations.

Net Ea.

16 lbs. $ 110.10 19 lbs. 134.40 25 lbs. 147.00

Style BMQ Motorized Ironman™

Char-LynnTM Hydraulic Motors D

Char-Lynn™ Hydraulic Motors for a wide variety of applicaD tions. Economical, compact and powerful. Available in the ever popular “H” motors, (101 series) as well as the high efficiency “S” motors (103 series). Industry proven design for years of trouble-free performance.

IronMan™ Cast Iron Gear Reducers with NEMA C input flange, for direct coupling with motor. Center distances of 1.33" through 3.25".

Most Popular! Maximum Maximum Part No. Style Torque HP

D

CE W6130077 CE W6180113

BMQ BMQ

240 lbs./inch 480 lbs./inch

Motors shown feature a 1” straight shaft with keyway, 1/2” FPT ports and 4-bolt mounting flange. (Many other Char-Lynn™ motors and options are available on request). H SERIES

Cubic Part No. Displacement FT 101-1001 2.8 FT 101-1002 4.5 FT 101-1003 5.9 FT 101-1004 9.7 FT 101-1005 11.3 FT 101-1006 14.1 FT 101-1007 17.9 FT 101-1008 22.6

Max. Ring Wt. RPM Size Lbs. Net Ea. 970 .250” 11 $ 172.80 760 .400” 12 191.90 585 .520” 12 209.60 355 .860” 13 245.50 300 1.00” 13 255.10 245 1.25” 13 279.80 190 1.60” 14 296.00 150 2.00” 15 322.20

S SERIES

Max. Ring Wt. RPM Size Lbs. Net Ea. 695 .58” 17 $ 335.40 550 .73” 16 308.10 355 1.14” 17 358.60 285 1.40” 17 368.70 230 1.76” 18 385.90 185 2.21” 20 409.10 150 2.84” 21 433.30

Cubic Part No. Displacement FT 103-1002 4.9 FT 103-1003 6.2 FT 103-1004 9.6 FT 103-1005 11.9 FT 103-1006 14.9 FT 103-1007 18.7 FT 103-1008 22.6

1/3 HP 3/4 HP

Wt.

Net Ea.

17 lbs. $ 301.00 24 lbs. 328.00

Style BM Motorized Ironman™ IronMan™ Cast Iron Gear Reducers with extended NEMA C input flange, for flexible coupling with motor. Center distances of 1.33" through 6.00".

D

Priced on Request!

Style B Non-Flanged Ironman™ IronMan™ Cast Iron Gear Reducers without input flange. Center distances of 1.33" through 6.00".

Priced on Request!

D

Motors 2 HP or Larger Cannot Ship by UPS due to Concerns with Damage in Shipment

Viton® is a registered trademark of DuPont Performance Elastomers

12 Volt & 24 Volt DC Motors D

Low Voltage DC Motors are designed to be battery operated for driving pumps, fans, auger, winches and lifts.

D

Features: NEMA 56C C-Face mounting • Permanently lubricated, sealed ball bearings • High starting torques for heavy load applications • Oversized brushes for long life • 1/4 HP through 1/2 HP are hard wired and are TENV • 3/4 HP and 1 HP are standard with terminal posts and are TEFC • All are rated 1750 RPM at full load • S56C Frames • Reversible rotation and removable bases are standard.

DULTMEIER SALES • OMAHA, NE

(800) 228-9666

Part No. HP Volts CE 108045 1/4 HP 12V CE 108046 1/3 HP 12V CE 108047 1/2 HP 12V CE 108048 3/4 HP 12V CE 108322 1 HP 12V CE 108050 1/3 HP 24V CE 108051 1/2 HP 24V CE 108052 3/4 HP 24V CE 108053 1 HP 24V

www.dultmeier.com

• DAVENPORT, IA

Full Load Amps 21.0 27.0 39.0 58.0 80.0 13.5 20.0 29.0 39.0

(800) 553-6975

Wt. 21 lbs. 24 lbs. 29 lbs. 30 lbs. 39 lbs. 22 lbs. 29 lbs. 30 lbs. 37 lbs.

Net Ea. $ 330.00 362.00 380.00 418.00 509.00 347.00 363.00 376.00 456.00

E0499


Coupling Guards • V-Belts

395

“Orange Peel” Coupling Guards — OSHA / ANSI / ASME Approved —

Why Do It Yourself - Where Just Trim & Fit Is Where It’s At! Orange Peel’s patented trim-and-fit design revolutionizes equipment guard convenience and value, so you can get the job-site safety you want without the expense and long lead times of custom engineered guards. Because Orange Peel guards are sized to your overall application, they can be installed in 3 easy steps: make 3 simple measurements; using dimensioned trim lines; make quick trim cuts, then simply fit the hardware. In less than an hour, Orange Peel can have you up and running. Safety Comes First. Orange Peel guards comply with OSHA, ASME, and ANSI standards. Very few guards do! Look for a Safety Orange guard, gaps no greater than .250” (6mm) and ANSI Z535.4 compliant warning labels. Maintenance Convenience Saves Time & Money. Orange Peel’s hinged guards open quickly by removing fasteners and “peeling” open the guard halves for coupling inspection and maintenance. Made of high impact polyethylene plastic, the same material used in truck bed liners, is extremely tough and durable. Supplied in solid Safety Orange (Yellow & White available). Orange Peel guards are ideal for harsh environments and virtually eliminate all guard maintenance. 3-Year Heavy-Duty Warranty. Orange Peel is backed by the industry’s first standard 3-year warranty, providing full protection. ANSI Safety Decal, Sold Separately

Type MCG Polyethylene Guards • Hinged Access for Easy Maintenance • Durable High Impact Polyethylene • (3) Sizes: 5, 15, 25 • Diameters to 9.63” (245mm) D

• Molded Safety Orange (Yellow & White are available) • Molded ANSI Warning Labels • -40° F. to 170° F. (-40° C to 77° C) • Maximum RPM is 3600

— For Motor — — DIMENSIONS — Part No. Frame Shaft Dia. (C) (B) Max. (B) Min. (C) Max. (C) Min. (D) Max. (E) Max. (F) Max.

Net Ea.

RN MCG05 48 thru 215T 0.500 thru 1.375 3.00 thru 5.25 4.25 2.00 5.25 3.00 1.38 3.50 4.00 $ 46.00 RN MCG15 182T thru 286TS 1.125 thru 1.625 4.50 thru 7.00 6.25 2.91 7.50 4.50 2.13 5.00 6.38 72.75 RN MCG25 284T thru 445TS 1.875 thru 2.375 7.00 thru 11.00 9.25 4.19 11.50 7.00 3.88 7.25 9.63 134.60 ND RS3X6 Rotating Shaft Warning Decal......................................................................................................................................................... 1.52

“B-Section” V-BELTS

Heavy Duty V-Belts

Cogged V-Belts (21/32" Top Width by 13/32" Thick)

(21/32" Top Width by 13/32" Thick)

Lengths 33” to 176” Composite multi-purpose construction for heavy load-carrying applications. Cover provides smooth, quiet operation with less vibration and extra flexibility. High-tensile cords assure long flex life and strength. Resistant to oil, heat, ozone, sunlight, weather and aging. Meets RMA requirements for static conductivity when new. Nominal Outside Part No. Length

GA B30 GA B33 GA B35 GA B38 GA B40 GA B42 GA B43 GA B44 GA B45 GA B46 GA B47 GA B48 GA B49 GA B50 GA B51 GA B52 GA B53 GA B54 GA B55

33" 36" 38" 41" 43" 45" 46" 47" 48" 49" 50" 51" 52" 53" 54" 55" 56" 57” 58”

Net Ea.

$ 8.08 8.18 8.28 9.19 11.35 10.00 10.10 10.10 10.40 10.85 11.15 11.25 11.35 11.45 11.65 11.90 11.85 12.05 12.05

Nominal Outside Part No. Length

GA B56 GA B57 GA B58 GA B59 GA B60 GA B61 GA B62 GA B63 GA B64 GA B65 GA B66 GA B68 GA B69 GA B70 GA B71 GA B72 GA B73 GA B75 GA B78

Net Ea.

59" $ 12.15 60" 12.40 61” 12.25 62" 12.45 63" 12.55 64" 12.75 65" 12.95 66" 12.95 67" 13.05 68" 13.15 69" 13.45 71" 13.75 72" 14.25 73" 14.55 74" 14.65 75" 17.10 76” 14.85 78” 14.65 81” 15.55

Nominal Outside Part No. Length

GA B80 GA B81 GA B82 GA B83 GA B85 GA B90 GA B95 GA B97 GA B100 GA B103 GA B108 GA B112 GA B120 GA B128 GA B132 GA B138 GA B158 GA B173

DULTMEIER SALES • OMAHA, NE

83" 84" 85" 86" 88" 93" 98" 100" 103" 106" 111” 115” 123” 131” 135” 141” 161” 176”

Net Ea.

$ 15.80 16.20 16.20 16.80 17.10 17.90 18.70 19.50 19.90 20.20 21.25 22.25 23.65 25.35 25.45 26.50 32.35 33.45

(800) 228-9666

Features: Oil and heat resistant • Static dissipating • RMA multiple V-belts in a raw edge, cogged construction are especially useful for compact drives and high ratios.

“BX-Section” Cogged V-BELTS

Nominal Outside Part No. Length

GA BX35 GA BX38 GA BX39 GA BX40 GA BX41 GA BX42 GA BX43 GA BX45 GA BX46 GA BX47 GA BX48 GA BX49

www.dultmeier.com

38" 41" 42” 43" 44” 45" 46" 48" 49" 50" 51" 52"

D

Net Ea.

$ 11.05 12.15 18.40 12.75 19.70 13.25 12.30 13.80 15.90 14.55 14.75 15.05

• DAVENPORT, IA

Nominal Outside Part No. Length

GA BX50 GA BX51 GA BX52 GA BX53 GA BX54 GA BX55 GA BX59 GA BX60 GA BX62 GA BX66 GA BX69 GA BX70

Net Ea.

53” $ 17.40 54” 23.45 55” 15.70 56” 15.80 57” 15.90 58” 16.00 62" 16.50 63" 16.60 65" 17.00 69" 27.10 72" 19.30 73" 18.70

(800) 553-6975

E0955


LoveJoy Couplings • Elastomer Couplings

396

3-Piece Flexible Couplings

Falk™ Wrapflex® Couplings D

D

COUPLING END

SPIDER

• “Replace in Place”

COUPLING END

Use “Hytrel” Spiders for Hi-Torque Applications with impulse or pulsating loads. Will transmit 3-Times more Torque than Rubber Spiders. For a complete coupling order 2-Bodies with desired bore of same rated H.P. and one Spider from the same grouping.

D

BODIES

SPIDERS

Body Part No. BORE Diameter Net Ea.

*RATED H P

• Non-Lubricated / Low Maintenance • Low Initial Cost • Easy-To-Install • 3-Year Heavy-Duty Warranty

Part No. Per 100 RPM Net Ea. LJ L070-1/2 1/2" 1-3/8" $ 6.10 LJ L070-R Buna-N .07 $ 3.60 LJ L070-5/8 5/8" 6.10 LJ L070-H Hytrel .18 $ 12.00 LJ L075-7/16 7/16" $ 7.00 LJ L075-1/2 1/2" 7.00 LJ L075-R Buna-N .14 $ 6.10 LJ L075-5/8 5/8" 1-3/4" 7.00 LJ L075-3/4 3/4" 7.00 LJ L075-H Hytrel .36 $ 18.00 LJ L075-7/8 7/8" 7.00 LJ L095-5/8 5/8" $ 16.50 LJ L095-3/4 3/4" 16.50 LJ L095-R Buna-N .30 $ 7.90 LJ L095-7/8 7/8" 16.50 LJ L095-1 1" 2-7/64" 16.50 LJ L095-1-1/8 1-1/8" 16.50 LJ L095-H Hytrel .90 $ 17.60 LJ L095-16mm 16mm 16.50 LJ L095-20mm 20mm 16.50 LJ L095-24mm 24mm 16.50 LJ L099-3/4 3/4" $ 20.80 Note: Use L100 Spiders with L099 Bodies LJ L099-1-1/8 1-1/8" 2-7/64" 20.80 LJ L100-R Buna-N .50 $ 16.70 LJ L099-20mm 20mm 20.80 LJ L100-H Hytrel 1.30 $ 57.00 LJ L099-24mm 24mm 20.80 LJ L100-3/4 3/4" $ 30.75 LJ L100-7/8 7/8" 30.75 LJ L100-15/16 15/16" 30.75 LJ L100-R Buna-N .66 $ 16.70 LJ L100-1 1" 30.75 LJ L100-1-1/8 1-1/8" 2-17/32" 30.75 LJ L100-H Hytrel 1.80 $ 57.00 LJ L100-1-1/4 1-1/4" 30.75 LJ L100-1-3/8 1-3/8" 30.75 LJ L100-20mm 20mm 30.75 LJ L100-24mm 24mm 30.75 LJ L110-7/8 7/8" $ 42.00 LJ L110-1 1" 42.00 LJ L110-R Buna-N 1.25 $ 19.20 LJ L110-1-1/8 1-1/8" 3-5/16" 42.00 LJ L110-1-1/4 1-1/4" 42.00 LJ L110-H Hytrel 3.60 $ 69.00 LJ L110-1-3/8 1-3/8" 42.00 LJ L110-1-1/2 1-1/2" 42.00 LJ L110-1-5/8 1-5/8" 42.00 LJ L110-24mm 24mm 42.00 LJ L150-7/8 7/8" $ 54.00 LJ L150-R Buna-N 2.00 $ 27.75 LJ L150-1 1" 54.00 LJ L150-1-1/8 1-1/8" 54.00 LJ L150-H Hytrel 5.88 $ 83.00 LJ L150-1-1/4 1-1/4" 3-3/4" 54.00 LJ L150-1-3/8 1-3/8" 54.00 LJ L150-1-1/2 1-1/2" 54.00 LJ L150-1-5/8 1-5/8" 54.00

Quick, easy installation and replacement for motors/engines that set new standards for reduced downtime. Because drives don’t need to be moved, these “replace in place” “Wrapflex®” elements even eliminate the need for timeconsuming realignment, further reducing downtime.

D

D

5R-E Wrapflex® Element

Wrapflex® Coupling Hub

Wrapflex® Couplings accommodate up to 7-1/4” (186mm) shafts and torque loads up to 133,000 lb.in. For simplicity and cost-effectiveness over the life of your coupling, it just doesn’t get any easier than this - Wrapflex® couplings from Rexnord. Wrapflex® couplings allow for 1° angular error and 40/1000’s parallel alignment error. Easy-to-Install. The compound root radius in the element teeth increases flexibility for easier and quicker assembly. Can be blind assembled from either direction. Tough, Long-Lasting polyurethane “Wrapflex®” element has excellent wear and chemical resistance, and an operating temperature of -40° F. to 200° F. Weather-resistant, high-grade nylon cover is standard. Complete assembly requires (2) hubs and (1) Wrapflex® element. Maximum of 4500 RPM.

*NOTE: For piston or plunger pumps reduce the rated horsepower by 1/3.

S-Flex Couplings

Specify Bore Size

Lovejoy S-Flex Couplings are designed to provide equipment protection against misalignment, vibration and shock loads. The S-Flex coupling will provide for an alignment error of 1 degree angular and 32/1000 parallel. The B Flanges are cast iron. The Type E EPDM Sleeve is a two piece style with retaining ring. S-Flex Couplings would generally be used in larger horsepower applications where the “L” Style Coupling does not provide the necessary protection or alignment flexibility. Fixed bore sizes.

TYPE E SLEEVE

#9 Lovejoy S-Flex for loads to 50 HP @ 1750 RPM or 100 HP @ 3500 RPM. Bore sizes 3/4" to 1-7/8". A complete assembly requires two flanges and one sleeve. Specify bore size. #9 LOVEJOY S-FLEX Part No. Net Ea. LJ 9S Flange (2 - Required).......................... $ 70.50 LJ 9E Sleeve (1-Required)............................ 86.50 Use 10B/10E & S-K Bushings for larger shaft sizes.

DULTMEIER SALES • OMAHA, NE

(800) 228-9666

† Max. HP *Max. HP *Max. HP Description @ 1000 RPM @1750 RPM @3500 RPM 5R Single Hub, 1-1/8” Bore 8.75 12.5 25 5R Single Hub, 1-3/8” Bore 8.75 12.5 25 5R Single Hub, 1-5/8” Bore 8.75 12.5 25 5R Single Hub, 20mm Bore 8.75 12.5 25 5R Single Hub, 24mm Bore 8.75 12.5 25 Wrapflex® Element for 5R...................................................................

Net Ea. $ 36.50 36.50 36.50 42.20 42.20 39.95

† Max. HP *Max. HP *Max. HP Description @ 1000 RPM @1750 RPM @3500 RPM 10R Single Hub, 1-3/8” Bore 18 25 50 10R Single Hub, 1-5/8” Bore 18 25 50 10R Single Hub, 1-7/8” Bore 18 25 50 10R Single Hub, 20mm Bore 18 25 50 10R Single Hub, 24mm Bore 18 25 50 Wrapflex® Element for 10R.................................................................

Net Ea. $ 45.05 45.05 45.05 53.80 53.80 66.30

† Max. HP *Max. HP *Max. HP Description @ 1000 RPM @1750 RPM @3500 RPM 20R Single Hub, 1-7/8” Bore 44 62 125 20R Single Hub, 2-1/8” Bore 44 62 125 20R Single Hub, 2-3/8” Bore 44 62 125 Wrapflex® Element for 20R.................................................................

Net Ea. $ 52.15 52.15 61.75 95.15

Part No. RN 5R-1-1/8 RN 5R-1-3/8 RN 5R-1-5/8 RN 5R-20MM RN 5R-24MM RN 5R-E

Part No. RN 10R-1-3/8 RN 10R-1-5/8 RN 10R-1-7/8 RN 10R-20MM RN 10R-24MM RN 10R-E

#8 Lovejoy S-Flex for loads to 30 HP @ 1750 RPM or 60 HP @ 3500 RPM. Bore sizes 3/4" to 1-5/8". A complete assembly requires two flanges and one sleeve. Specify bore size. #8 LOVEJOY S-FLEX Part No. Net Ea. LJ 8S Flange, 2 - Required................................ $ 46.75 LJ 8E Sleeve, 1-Required................................... 77.00

Part No. RN 20R-1-7/8 RN 20R-2-1/8 RN 20R-2-3/8 RN 20R-E

* Maximum HP based on 1.25 factor of safety (1.22 on 5R sizes); normally used for motor-driven centrifugal pumps, gear pumps and rotary vane pumps. Cal for safe maximum HP for other applications. † For Piston/Plunber Pumps, Downgrade HP Ratings above by 20%.

www.dultmeier.com

• DAVENPORT, IA

(800) 553-6975

E0493


Sheaves • Bushings Cast Iron Sheaves

Tapered Bushings

For A and B Section V-Belts

Split Tapered Bushings bored which provides a tapered, precision fit. Inside is straight bored to fit the shaft.

Bushing not included. Selected sizes shown to the right.

ONE GROOVE “A” — “B” Part No.

O.D.

A Belt B Belt

Two socket head cap screws furnished with each bushing.

Net Ea.

GA 7801-151 3.95 3.20 3.60 $ 17.20 GA 7801-153 4.45 3.70 4.10 18.00 GA 7801-155 4.95 4.20 4.60 18.70 GA 7801-157 5.45 4.70 5.10 19.50 GA 7801-159 5.95 5.20 5.60 20.75 GA 7801-161 6.45 5.70 6.10 22.85 GA 7801-164 7.25 6.50 6.90 25.65 GA 7801-162 6.75 6.00 6.40 23.55 GA 7801-166 7.75 7.00 7.40 26.50 GA 7801-169 8.75 8.00 8.40 31.25 GA 7801-171 9.75 9.00 9.40 34.85 GA 7801-173 10.75 10.00 10.40 38.40 GA 7801-175 11.75 11.00 11.40 42.45 GA 7801-177 12.75 12.00 12.40 46.50 GA 7801-179 13.75 13.00 13.40 52.65 GA 7801-182 15.75 15.00 15.40 61.55

D

GA7801-151

D

D

Part No.

O.D.

A Belt B Belt

GA7801-253

D

Net Ea.

7812-3 7812-4 7812-5 7812-6 7812-7 7812-8 7812-9 7812-10 7812-11 7812-12 7812-13 7812-14 7812-15 7812-16 7812-17 7812-18 7812-19

1/8" x 1/16" 1/8" x 1/16" 3/16" x 3/32" 3/16" x 3/32" 3/16" x 3/32" 3/16" x 3/32" 3/16" x 3/32" 1/4" x 1/8" 1/4" x 1/8" 1/4" x 1/8" 1/4" x 1/8" 1/4" x 1/8" 1/4" x 1/16" 5/16" x 1/16" 5/16" x 1/16" 3/8" x 1/16" 3/8" x 1/16"

Type “H” Bushings Net Ea.

SERVICE & REPAIRS Did you know? We can service almost every brand of pump we sell in our catalog. Call us at 1-800-228-9666 (Omaha, NE) for a quote!

– Less 10% On 10+ Assorted –

GA7801-269

Keyseat

1/2 9/16 5/8 11/16 3/4 13/16 7/8 15/16 1 1-1/16 1-1/8 1-3/16 1-1/4 1-5/16 1-3/8 1-7/16 1-1/2

GA 7812-1030 18mm ......................... 7.68 GA 7812-1031 20mm ......................... 7.68 GA 7812-1034 22mm ......................... 7.68 GA 7812-1032 24mm ........................ 6.87 GA 7812-1033 25mm ........................ 7.68 GA 7812-1035 28mm.......................... 7.68 GA 7812-1036 30mm.......................... 7.68 GA 7812-1037 32mm.......................... 7.68 GA 7812-1038 35mm.......................... 7.68 GA 7812-1040 38mm.......................... 8.38 (*) Select the complete product number from chart

GA 7801-251 3.95 3.20 3.60 $ 30.20 GA 7801-253 4.45 3.70 4.10 34.15 GA 7801-255 4.95 4.20 4.60 35.65 GA 7801-257 5.45 4.70 5.10 39.20 GA 7801-259 5.95 5.20 5.60 80.30 GA 7801-261 6.45 5.70 6.10 44.55 GA 7801-262 6.75 6.00 6.40 45.75 GA 7801-266 7.75 7.00 7.40 53.15 GA 7801-269 8.75 8.00 8.40 54.15 GA 7801-271 9.75 9.00 9.40 62.85 GA 7801-273 10.75 10.00 10.40 68.10 GA 7801-275 11.75 11.00 11.40 77.70 GA 7801-277 12.75 12.00 12.40 80.70 GA 7801-279 13.75 13.00 13.40 94.45 GA 7801-282 15.75 15.00 15.40 99.10

D

Product No.

Metric Bushings:

TWO GROOVE “A” — “B” Part No.

Stock Bore (in.)

GA 7812-1 (1-19) * Tapered Bushing....... $ 7.68

– Less 10% On 10+ Assorted –

GA7801-179

397

Light Duty Cast Iron Sheaves ONE GROOVE — 7800 Series Steel — Bored to Size

D

For 5L or B Section V-Belts • Standard Keyways O.D. INCHES

2.25 2.50 2.75 3.00 3.50

FIXED BORE D

B Belt Pitch Dia.

2.09 2.34 2.59 2.84 3.34

Part No. 5/8" 3/4" 7/8" 1"

GA 7800-67 7800-68 GA 7800-72 7800-73 GA 7800-76 7800-77 GA 7800-81 7800-82 GA 7800-91 7800-92

.......... 7800-102 7800-103 7800-104 7800-106

GA-NO”s 1-1/8"

.......... .......... .......... .......... 7800-78 .......... 7800-83 .......... 7800-93 7807-3618

Net Ea.

$ 8.99 9.29 10.20 10.50 13.95

TWO GROOVE — 7800 Cast Iron — Bored to Size For 5L or B Section V-Belts • Standard Keyways O.D. INCHES

D

FIXED BORE

2.50 3.00 3.20 3.40

DULTMEIER SALES • OMAHA, NE

B Belt Pitch Dia.

Part No. 5/8" 3/4" 7/8" 1"

GA-NO’s 1-1/8"

Net Ea.

2.30 GA 7807-7212 .......... 7807-7214 7807-7215 .......... $ 22.45 2.60 GA 7807-7232 7807-7233 7807-7234 7807-7235 7807-3593 24.95 3.00 .......... .......... .......... .......... GA 7807-7816 27.70 3.20 GA 7807-7822 7807-7823 7807-7824 7807-7825 7807-7826 28.90

(800) 228-9666

www.dultmeier.com

• DAVENPORT, IA

(800) 553-6975

E0494


398

Air Line Filters • Regulators • Lubricators Air Line Filter/Regulators

Miniature Air & Water Regulators

Parker Air Filter/Regulators combine air pressure regulation with excellent water removal. Lightweight, robust aluminum construction. Balanced poppet provides quick and accurate regulation. Non-rising adjustment knob. Relieving design. 5 Micron element. Female ports. Pressure gauges are included. Manual or automatic drains as noted. * 1/4” Models are manual or auto/pulse drain.

Miniature Regulators from Parker Pneumatics. Compact design provides quick response and accurate pressure regulation. Non-rising adjusting cap. Inlet pressures to 300 PSI. Model 14R: Air Line Regulator features “zinc” body with 1/4” inlet/outlet and 1/8” gauge port. Relieving Design. Rated to 28 CFM. Temperature rating is -4° to +125° F. 14R D

P32 Series

Model 15R: Air Line Regulator features “zinc” body with 3/8” inlet/outlet and 1/4” gauge port. Relieving Design. Rated to 28 CFM. Temperature rating is -4° to +125° F.

D

15R

Model 20R: Air Line Regulator features “brass” body with 1/4” inlet/outlet and 1/8” gauge port. Rated to 28 CFM air and 1.25 GPM water. Temperature rating is +32° to +125° F. Non-Relieving Design. Part No. Ports

PA 14R113FC PA 15R213FB PA 20R113GC

P31 Series

1/4” FPT 15 CFM 3/8” FPT 28 CFM 1/4” FPT 15CFM/1.25 GPM

P32

P33

D

20R

Net Ea.

2-125 PSI $ 17.00 2-125 PSI 30.00 2-125 PSI 27.40 D D

Operating temperatures to 150° F. Female ports. Pressure gauges are included. Maximum Pressure Flow Rate Range

PA P32RA92BNGP PA P32RA92BNJP PA P32RA93BNGP PA P32RA93BNJP PA P33RA94BNJP PA P33RA96BNJP

81 CFM 81 CFM 138 CFM 138 CFM 212 CFM 212 CFM

1/4” FPT 1/4” FPT 3/8” FPT 3/8” FPT 1/2” FPT 3/4” FPT

Net Ea.

5-125 PSI $ 40.95 10-250 PSI 41.00 5-125 PSI 40.95 10-250 PSI 40.95 10-250 PSI 58.45 10-250 PSI 58.45

Air Filters from Parker Pneumatics. Excellent water removal efficiency. Lightweight aluminum construction. Available with manual or automatic drain valves. 5 Micron element. Plastic bowl with bowl guard. Rated to 150 PSI. Female ports Temperatures to 128° F. Note: P31 Models are manual or auto/pulse drain.

P31 Series P32 Series Part No. Ports Flow Rate Drain

PA P31FA92EGMN PA P31FA92EGBN PA P32FA92EGMN PA P32FA92EGAN PA P32FA93EGMN PA P32FA93EGAN PA P32FA94EGMN PA P32FA94EGAN

1/4” FPT 1/4” FPT 1/4” FPT 1/4” FPT 3/8” FPT 3/8” FPT 1/2” FPT 1/2” FPT

Regulated Pressure Range from 10 to 100 PSI This relieving type 4-port regulator is constructed of forged brass and other high grade non-rusting materials to assure long trouble free service. Two gauge ports, to monitor high & low side pressures. Maximum inlet pressure is 400 PSI.

PA P31CB92GEB 1/4” FPT 27 CFM $ 98.50 PA P32CB92GEA 1/4” FPT 42 CFM 176.30 PA P32CB93GEA 3/8” FPT 64 CFM 176.30

Inline Air Filter

D

Net Ea. $ 91.05

(800) 228-9666

Net Ea.

Manual $ 22.40 Auto/Pulse 26.45 Manual 40.65 Auto 65.05 Manual 40.65 Auto 65.05 Manual 40.65 Auto 65.05

Part No. Ports Flow Rate Net Ea.

1/2" model will deliver 200 cfm with inlet pressure of 100 PSI and set pressure of 50 PSI.

DULTMEIER SALES • OMAHA, NE

27 CFM 27 CFM 38 CFM 38 CFM 64 CFM 64 CFM 80 CFM 80 CFM

Combination Filter/Regulator/Lubricators (FRL) from Parker Pneumatics. For air line preparation and regulation. All units include regulator, 5 Micron element for moisture removal, mist lubricator, gauge and wall bracket.Automatic drain on P32 Series, pulse drain on P31. All models are rated from 5 to 125 PSI.

High Capacity Air Regulator

Gauge Max. Max. Part No. Inlet/Outlet Ports CFM PSI GE 4HCR-500B 1/2" FPT 1/4" FPT 200 100

Net Ea.

Air Line Filter/ Regulator/Lubricators

Generant

D

Drain

Air Line Filters

Air Pressure Regulators from Parker Pneumatics. Robust but lightweight aluminum construction. Balanced poppet valve provides quick response and accurate regulation. Nonrising adjustment knob and relieving features are standard.

Part No. Ports

Maximum Pressure Flow Rate Range

PA P31EA92EGM * 1/4” FPT 30 CFM 10-125 PSI Manual $ 44.40 PA P31EA92EGB * 1/4” FPT 30 CFM 10-125 PSI Auto/Pulse 48.35 PA P32EA92ES 1/4” FPT 89 CFM 10-250 PSI Manual 79.00 PA P32EA92ESA 1/4” FPT 89 CFM 10-250 PSI Auto/Pulse 103.40 PA P32EA93ES 3/8” FPT 123 CFM 10-250 PSI Manual 79.00 PA P32EA93ESA 3/8” FPT 123 CFM 10-250 PSI Auto 103.40 PA P33EA94ES 1/2” FPT 191 CFM 10-250 PSI Manual 94.80 PA P33EA94ESA 1/2” FPT 191 CFM 10-250 PSI Auto 119.20 PA P33EA96ES 3/4” FPT 208 CFM 10-250 PSI Manual 94.90 PA P33EA96ESA 3/4” FPT 208 CFM 10-250 PSI Auto 119.20

Air Line Regulators D

D

D

Part No. Ports

D

Maximum Pressure Flow Rate Range

P33 Series

D

D D

P32 Series

Disposable Filter/Dryer designed to remove moisture and oils that may by-pass your air filtration system. Rated to 15 CFM, 125 PSI and 130° F. Ports are 1/4" MPT x 1/4" FPT and can be installed in either direction. Color change occurs when filters need to be replaced. Sold in packs of 2 filters.

Part No.

Net Ea.

GN 6ZC63 Inline Air Filter - 2 Pack..... $ 34.50

www.dultmeier.com

• DAVENPORT, IA

(800) 553-6975

E1042


Air Accessories • Air Machines Tire Pressure Gauges

A505 ACME Tractor Tire Pressure Gauge: For air and liquid filled tires. Four-sided nylon bar calibrated 5 to 50 lbs in 1 lb. units. Brass connection, fully chromed. Pocket clip.

A509 ACME Professional Tire Gauge: Foursided easy-to-read nylon indicator bar calibrated 5 to 50 lbs. in 1 lb. units. Brass construction. Polished chrome. Handy pocket clip. A522 ACME Dual-Head Truck Gauge: For use on dual wheels and other hard-to-reach valves. Highly chromed finish. Brass construction. Foursided nylon indicator bar calibrated from 20 to 120 lbs. in 2 lb. units. Pocket clip. A810 ACME Ball-Foot Air Chuck: 1/4" MPT. A815 ACME Ball-Foot Air Chuck: 1/4" FPT. A824 ACME Dual-Foot Extension Chuck: Closed Check Chuck. For hard-to-get-at valves on tractor, dual-wheel truck and bus tires. 1/4" FPT inlet. Nickel-plated. For use on air hoses and air meters. A1501-BL ACME Sight Glass Inflator Gauge: Makes tire inflation easy. The dual calibrated (PSI and kPa) internal pressure reading indicator makes this inflator simple to read. The gauge measures from 10 to 120 lbs. in 2 lb. increments allowing precise control over tire inflation. A522 A825 SCHRADER Valve stem 1/4” MPT.

A505

Quick-Connect Air Line Fittings A810

EATON/HANSEN Quick-Connect Cou­ plings provide the fastest, easiest, and most reli­able means of joining air lines and tools. Automatic coupling, easy disconnect and positive air shutoff. Coupling bodies are brass, Plugs are plated steel. All fittings are of the popular “Industrial Interchange” design. Rated to 150 PSI.

A1501-BL

Description

Net Ea.

AM A505 AM A509 AM A522 AM A810 AM A815 AM A820 AM A824 AM A825 AM A1501-BL

Tire Gauge.................................................. Tire Gauge.................................................. Tire Gauge.................................................. Air Chuck, 1/4” MPT................................... Air Chuck, 1/4” FPT..................................... Clip On Air Chuck with 1/4” FPT Inlet.......... Extension Air Chuck.................................... Schrader Valve x 1/4” MPT......................... Sight Glass Style Inflator Gauge.................

$ 5.73 4.43 7.02 4.80 3.13 7.18 6.31 4.49 43.60

8670-2GA Machine Only

8533-8 Air Chuck

OSHA compliant depending on style of nozzle that is used. * (Nonrelieving, rubber nozzles are only OSHA compliant if inlet pressure is regulated to 30 PSI maximum).

8647 Nozzle

D

Part No.

Style

D

MPT Plugs

#8670-2WBTA-65 Machine with base

F.O.B. Factory

Part No. Net Ea.

AA 8670-2GA AA 8670-2WGA AA 8670-2FGA

Pay Air Machine, Wall Mount..................... $ 1556.00 Pay Air/Water Machine, Wall Mount........... 1714.00 Free Air Machine, Wall Mount.................... 1505.00

AA 8670-2BA/6026 Pay Air Machine with S.S. Base & Reel............. AA 8670-2WBTA-65 Pay Air/Water Machine with S.S. Base & Reel..

BG27

2496.00 2803.00

D

To Deliver the Best Possible Service

Lever Guns are chrome-plated brass construction rated to 150 PSI. Coated lever with 1/4” FPT inlet. Available with brass or *rubber nozzles. Pistol Grip Guns feature a lightweight, nylon body with brass valve mechanism. Rated to 125 PSI. Inlet is 1/4” FPT. Available with brass or *rubber nozzles.

FPT Plugs

Specifications: 1.5 HP oilless, 3.1 SCFM at 90 PSI Compressor • Timer is adjustable up to 10 minutes and 1 to 7 coins • Gauge is heavy-duty bayonet style • Hose is cut resistant 25' x 1/4" wire braid. • Dimensions are 18" W x 16" H x 12-1/2" D.

Air Blow Guns Heavy-Duty Blow Guns combine durability, performance and safety to meet your cleaning and drying needs. Available in top mount lever or button styles or plastic pistol style. Brass safety nozzles are rated to the pressures shown. Rubber nozzles are an ideal choice for protecting against scratches or damage to surfaces.

D

Stainless Steel Air Machines are a great addition to your convenience store, truck stop or car wash. Tough stainless steel construction and good engineering ensures years of dependable service. Constructed of a high quality 14-gauge stainless steel. These machines have an attractive design and will look like new year after year. Units available with or without base. Designed with a concealed hinge and high security lock bar system that has been engineered to protect your income. An optional locking coin box allows service to the mechanics of the equipment without access to the money.

A815

Part No.

FPT Coupler

Air Machines

A509

A820

D

Part No. Net Ea. EV DCB20 1/4" FPT Female Coupler....... $ 5.00 EV DCB26 3/8" FPT Female Coupler....... 8.89 EV DCB10 1/2" FPT Female Coupler....... 11.25 EV DCP20 1/4" FPT Female Plug............. 1.18 EV DCP26 3/8" FPT Female Plug ............ 2.53 EV DCP18 1/2" FPT Female Plug............. 3.02 EV DCP21 1/4" MPT Male Plug................ .92 EV DCP25 3/8" MPT Male Plug................ 2.12 EV DCP17 1/2" MPT Male Plug................ 2.63

A824

A825

399

to Our Customers, Dultmeier Sales Strives to Live Up to

BG45

D

A Set of Core Values, One of Which is to

Nozzle

Net Ea.

Display “Character”

Do the right thing even when no one is looking

ZS BG25 Lever Brass $ 7.02 ZS BG27 Lever * Rubber 7.58 ZS BG45 Pistol Brass 9.60 ZS BG50 Pistol * Rubber 8.75 DULTMEIER SALES • OMAHA, NE DULTMEIER SALES • OMAHA, NE

(800) 228-9666 • www.dultmeier.com • DAVENPORT, IA (800) 553-6975 (800) 228-9666 • www.dultmeier.com • DAVENPORT, IA (800) 553-6975

E0518

E0518


Air Valves • Regulators • Filter

400

“Load Genie” Combination Unloader & Check Valves

Air Check Valves Air Check Valves are designed to reduce hammering effect caused by exhaust pulsation in piston type compressors. For Lubricated air applications only. Cast brass construction with Teflon disc and stainless spring. Rated to 400 PSI and 350° F.

D

Positive, reliable, inexpensive method for unloading discharge manifold of any compressor. Unloads manifold any time air flow stops; not dependent upon power sources or tank pressure. Operates in any position. For pressure switch or constant-speed operation. Maximum working pressure 250 PSI. Brass body, stainless steel springs, Teflon seals.

D

Model 205 Part No.

Ports

Rating

Net Ea.

GN 5X780 * 1/4” FPT 20 SCFM @ 100 PSI GN 5X781 3/8” FPT 140 SCFM @ 100 PSI KG 215-4 1/2” FPT 180 SCFM @ 100 PSI KG 205-5 3/4” FPT 1000 SCFM @ 250 PSI KG 205-6 1” FPT 1600 SCFM @ 250 PSI KG 205-8 1-1/2” FPT 2400 SCFM @ 250 PSI KG 205-9 2” FPT 3000 SCFM @ 250 PSI * No Bleeder Port on 1/4” Size.

Part No.

$ 14.95 21.45 36.05 74.30 103.50 139.20 219.60

GN 4X997 GN 4X999

For Water

4HC500 REGULATOR Features: The same as 4HC375 Except for 1/2" pipe size. TWO 1/2" FPT ports and TWO 1/4" gauge ports.

D

Model KVS10 Ports

Model 112C

Rating

Net Ea.

$ 5.56 12.75 29.25

30 SCFM @ 100 PSI 90 SCFM @ 150 PSI 275 SCFM @ 150 PSI

Pipe Flow Part No. Size GPM

KG 305A2-1 KG 305A3-1 KG 305A4-1 KG 305A5-1

Lift & Hoist Valves

Ports

Net Ea.

1/4” FPT 3/8” FPT 1/2” FPT 3/4” FPT

$ 36.55 36.65 64.05 82.95

Part No.

* Based on 100 PSI incoming and 20 PSI Discharge Pressure.

Ports

Tire Fill Adapter A210 Tire Fill Adapter connects garden hose to tire valves for filling tires with liquid. Push-button bleeder valve releases trapped air to assure desired level of liquid in tires. Fits A202 tractor valve. Includes 2 extra bushing to fit standard tire valves and other tractor air/liquid valves. Part No.

Style

Net Ea.

Air Filter / Dryer Two Stage Air Filter / Dryer is designed to remove moisture and debris from air supply lines. Protects air pumps, tools, etc. from dirt, dust, oil and moisture. Standard with manual drain valve and replaceable cartridge filters. Rated to 15 CFM. Pressures to 250 PSI and temperatures to 180° F. Ports are 1/4" FPT.

D

Part No.

FJ FJ520B

Net Ea.

KG 303-4 1/2” “Deadman” $ 59.65 KG 302-4 1/2” Locking 59.65 DULTMEIER SALES • OMAHA, NE

D

AM A210 $ 10.15

Model 303 1/2” NPT

Hoist Control Valves are designed to operate lifting devices utilizing compressed air or oil. Widely used on automobile or truck hoists or single acting cylinders. Cast brass construction with buna seals. Model 303 is a “Dead Man”” style that returns to neutral when released. Model 302 features a locking lever design. Rated to 200 PSI.

Net Ea.

GE 4HC-375B 3/8” FPT *7-1/2 $ 87.30 GE 4HC-500B 1/2” FPT *7-1/2 87.30 GE HC-B Repair Kit for 4HC375 & 4HC500.. 32.60

Quick opening, normally closed valves for use with compressed air or liquids. Often referred to as “Whistle Valves”. Bodies are cast brass. Disc and o-ring are Buna but Viton® or Teflon are also available. Squeeze lever handle is standard. Rated to 400 PSI and 200° F. (Not recommended for steam service). Part No.

D

“HC” Series “GENERANT” High Capacity Pressure Regulators are ideal for regulating incoming water pressure. Protect your pumps and injectors from high incoming pressures. Constructed of forged brass and other high grade non-rusting materials. Long trouble-free service is assured. Fully balanced for uniform regulation at high volumes. Weight is 3 lbs. (For air service — see Air Regulators.)

Air Lever Valves

Model 305A2-1

Net Ea.

3.0 to 12.0 13/16" $ 35.10 15.0 to 48.0 1-3/16" 57.95

Inlet Pressure Regulators

D

D

3/8" 3/4"

Hex Size

4HC375 REGULATOR Features: (4) PORT Nonrelieving Regulator for 3/8" pipe size. TWO 3/8" FPT ports and (2) 1/4" FPT gauge ports. Adjustable pres­sure range is 5 to 50 PSI. Maximum incoming pressure up to 400 PSI. Maximum temperature to 200° F.

Air Safety Relief Valves are compact yet provide high flow capacities. Brass construction with pull ring for testing. ASME rated. Ports are MPT.

Part No.

1/2" 3/4"

MPT Flow Range Outlet CFM (Free Air)

† Compression tube inlet size, O.D.

Air Relief Valves

KG KVS10-2-100 1/4” MPT KG 112CSS-2-150 1/4” MPT KG 118CSS-4-150 1/2” MPT

Tube † Inlet

(800) 228-9666

Filter / Dryer

D

Net Ea.

$ 122.20

Viton® is a registered trademark of DuPont Performance Elastomers

www.dultmeier.com

• DAVENPORT, IA

(800) 553-6975

E0940


Winches • Hitch Pins • Bin Cartons Hand Winches

DL1602

401

Heat Treated Hitchpins

DL2000

DL1300

D

D

D

D

These hitch pins have a red plastisol coated head and are made from high-tensile steel. Hairpin clip included. Made in the U.S.A. Usable Std. Std.Pkg.

Part No. Diameter Length Pkg. Discount Net Ea. OH H58 5/8" 5-1/2" 12 20% $ 5.16 OH H34-4 3/4" 4" 12 20% 5.36 OH H34 3/4" 6-1/2" 12 20% 5.93 OH H78 7/8" 6-1/2" 12 20% 7.26 OH H100 1" 7-1/2" 6 20% 9.82 OH H1125 1-1/8" 8-1/2" 6 20% 13.55 OH H1250 1-1/4” 8-1/2” 6 20% 17.15 OH H1500 1-1/2” 8-1/2” 4 20% 24.25

DL3500B

D

D

DL2500 DL2500B

DL1300 Hand Winch: 1300 lbs. rated capacity. 4.4:1 gear ratio. 7/8" drum hub diameter. Single gear ratio. Accepts 56' of 7/32" cable. Has one way ratchet only. DL1602 Hand Winch: 1600 lbs. rated capacity. 5.4:1 gear ratio. 1-1/8” drum hub diameter. Single gear ratio. Accepts 58' of 1/4" cable. DL2000 Hand Winch: 2000 lbs. rated capacity. 12.4:1 and 5.4:1 gear ratios. 1-1/8" drum diameter. Two-speed double reduction gear system. Accepts 58' of 9/32" cable. DL2500 Hand Winch: 2500 lbs. rated capacity. 17.3:1 and 5.4:1 gear ratios. 1-1/8" drum hub diameter. Two-speed double reduction gear system. Accepts 47' of 5/16" cable. DL2500B Hand Winch with hand brake: 2500 lbs. rated capacity. 17.3:1 and 5.4:1 gear ratio. 1-1/8" drum hub diameter. Two-speed double reduction gear system. Accepts 47' of 5/16" cable. DL3500B Hand Winch with hand brake: 3500 lbs. rated capacity. 12.1 and 6:1 gear ratios. 1-5/16" drum hub diameter. Two-speed double reduction gear system. Accepts 37' of 3/8" cable.

Hair Pin Clips

For Hitch Pins and Clevises Wire Part No. Diameter MI 3X1200 5/32" MI 3X1230 3/16"

Overall Use Length With 2-15/16" 5/8" - 7/8" 3-1/4" 1"

No-Spill Corrugated Bin Cartons

Cable with Hook D

6216

Pulley Block & Hook

No. 6216 Pulley block and hook assembly for double line operation on electric winches. Bulk packed 4 per carton. Wt. 7 lbs. 8 oz.

No. 6210 Winch cable with hook, 25' x 3/16". Packaged in poly bag. 4 per carton. Wt. 16 lbs. No. 6211 Winch cable with hook, 50' x 3/16". Packaged in poly bag. 4 per carton. Wt. 20 lbs. No. 6212 Winch cable with hook, 50' x 7/32". Packaged in poly bag. 4 per carton. Wt. 22 lbs.

12+ Assorted Part No. Capacity/Lbs. DISCOUNT DN DL1300 1300 10% DN DL1602 1600 10% DN DL2000 2000 10% DN DL2500 2500 10% DN DL2500B *2500 10% DN DL3500B *3500 10% * These models are with Hand Brake. DN 6210 DN 6211 DN 6212 DN 6216

Wt. 7 lbs. 9 lbs. 12 lbs. 15 lbs. 15 lbs. 22 lbs.

Permanently Self-Locking, No Spill Back Lip

D

D

Net Ea. $ 41.75 59.10 110.60 78.30 132.40 267.70

Sturdy, one-piece, die-cut, high-quality, oyster-white, 200 lb. test, B flute corrugated board bin cartons. Self-locking construction; assembled in seconds and will not come apart.

Stock Carton Shelf Shpg. No. Width Depth Wt. 1W765 2" 12" 3 1W766 4" 12" 4-1/2 1W767 6" 12" 6-1/4 1W768 8" 12" 7-3/4" 1W862 10" 12" 8-1/2 1W769 12" 12" 9-1/4

Easy-to-Fold Assembly. 200-lb. Test: Extra Strong

ACCESSORIES

CARTON Part No.

Brake Winches

Rated Minimum Part No. Capacity Load DN DLB805 800 Lbs. 50 lbs. DN DLB1500 1500 Lbs. 75 lbs. DN DLB2500 2500 Lbs. 195 lbs.

Bundle of 25 Net Ea.

GN 1W765 $ 37.35 GN 1W767 61.30

Gear Max. Drum Ratio Capacity 4.5:1 3/16" x 71' 5.5:1 1/4" x 66' 17:3 5/16” x 34’

DULTMEIER SALES • OMAHA, NE

Reinforced 4-ply, 4-1/2" high back-lip catches underside of upper shelf to give easy angleaccess to content of carton and prevent spilling.

Priced and sold only in bundles of 25 cartons per size.

Cable with Hook. 25' x 3/16"........................ 21.00 Cable with Hook. 50' x 3/16"........................ 31.70 Cable with Hook 50' x 7/32"......................... 37.90 Pulley Block and Hook................................. 33.70

Brake Winches have a friction brake which automatically applies a constant, positive holding action.The load remains exactly in position when handle is released. Brake winches should be used in place of ratchet winches in applications where a danger would be created if the winch load were inadvertently allowed to freewheel. Note: Model DLB805 has a freewheel lever which allows cable to be pulled from winch.

Box of 100 Discount Net Ea. 30% $ .22 30% .35

CARTON Part No.

Bundle of 25 Net Ea.

GN 1W768 $ 47.45 GN 1W862 69.35 GN 1W769 86.85

D

DLB805 Wt. 8 lbs. 12 lbs. 16 lbs.

Net Ea. $ 85.80 120.20 163.20

(800) 228-9666

www.dultmeier.com

• DAVENPORT, IA

(800) 553-6975

E0535


Winches • Jacks • Hitches

402

Superwinch® 12-Volt Winches

Equipment Jacks 5,000 Lb. Capacity Agricultural jacks are supplied with a 2-1/32" I.D. mounting. The 5/8” hitch pin with chain and ball retention and one mounting bracket are included.

D

Standard Mounting Tube (Included but Not Sold Separately)

Standard Features: • Powers Load IN & OUT • Mechanical & Dynamic Brake • Full Metal Gear Train • Freespooling Clutch for Fast Wire Rope Payout • High Efficiency Low Amp Draw Motor

• Commercial Grade Integrally Mounted Sealed Contactor • Circuit Breaker Protected • Durable Handheld Remote Switch on 30' Lead • Roller Fairlead

Mounting To Base Total SJ-NO. Retracted Extended Lift Tube Capacity TM10 11" 21" 10" 2-1/4" 5000-lbs. TM15 16" 31" 15" 2-1/4" 5000-lbs.

Top Crank Tube Mount

Model 1430200

3000 Lbs. Rated Line Pull Single Line

Specifications:

Part No.

D

Wt.

Net Ea.

SJ TM10 Jack with Bracket 16 lbs. $ 35.15 SJ TM15 Jack with Bracket 17 lbs. 39.00

Tow Hitches

D

Motor: 1.3 h.p. Gearing: Differential Planetary Gear Ratio: 159:1 Brake: Mechanical & Dynamic Wire Rope: (included): 3/16" x 60' with Latched Hook Dimensions: 15.1" L x 8.7" D x 6.0" H

Tow Hitches for pickups and light trucks. Maximum draw weight is 6000 lbs. Telescoping arms permit quick hookup and perfect alignment. For agricultural towing, not for high speed use. Note: Mounting holes may have to be drilled. F100 for frame mounting (brackets are 34" wide and extend under the frame approximately 13") will fit most 1/2 ton pick-ups that do not have leaf springs. Problems may be encountered with some 4-wheel drive models. Also problems may be encountered with the air dam and tow hooks on some new models. B100 for bumper mounting. Bolts to the outside of the bumper. Hardware included.

Model 1440200

4000 Lbs. Rated Line Pull Single Line

Specifications:

D

Motor: 1.8 h.p. Gearing: Differential Planetary Gear Ratio: 159:1 Brake: Mechanical & Dynamic Wire Rope: (included): 7/32" x 60' with Latched Hook Dimensions: 15.1" L x 8.7" D x 6.0" H

F100 Frame Mounted Hitch

Model 1450200

5000 Lbs. Rated Line Pull Single Line

Specifications:

B100 Bumper Mounted Hitch

Part No. FE F100 Frame Mounted Hitch FE B100 Bumper Mounted Hitch

Wt. Net Ea. 47 lbs. $ 283.40 33 lbs. 267.70

D

Motor: 2.1 h.p. Gearing: Differential Planetary Gear Ratio: 159:1 Brake: Mechanical & Dynamic Wire Rope: (included): 1/4" x 50' with Latched Hook Dimensions: 15.1" L x 8.7" D x 6.0" H

Superwinch®

Visit Our Office in Omaha, Nebraska

SP 2229A Pulley Block

Performance Chart Line Pull #1430200 #1440200 #1450200 (1st layer on drum) Line Speed Motor Line Speed Motor Line Speed Motor lb. kg. FPM MPM Amps FPM MPM Amps FPM MPM AMPS 0 17.0 5.1 15 21.6 6.5 30 17.5 5.9 36 1,000 454 12.5 3.8 70 16.0 4.8 90 14.5 4.6 80 2,000 907 9.0 2.7 117 12.4 3.8 155 12.0 3.4 135 2,500 1134 7.5 2.3 155 10.6 3.2 180 - - 3,000 1361 4.5 1.4 220 8.8 2.7 215 9.5 2.2 200 3,500 1589 6.2 1.9 250 - - 4,000 1814 4.5 1.4 311 7.3 1.3 265 5,000 2268 4.5 1.4 350

Fairlead Part No. Rated Switch Included Weight SP 1430200 3,000 * Remote Yes 38 lbs. SP 1440200 4,000 * Remote Yes 40 lbs. SP 1450200 5,000 * Remote Yes 42 lbs. SP 2229A Pulley Block............................................................... * Remote Handheld Switch includes 30 feet of cable & Plug.

DULTMEIER SALES • OMAHA, NE

Net Ea. $ 584.00 626.00 693.00 44.55

(800) 228-9666

13808 Industrial Road • Omaha, NE 68137 1-800-228-9666 • 1-402-333-1444 • FAX: 1-402-333-5546

Visit Our Office in Davenport, Iowa

601 West 76th St. • Davenport, IA 52806 1-800-553-6975 • 1-563-386-0930 • FAX: 1-563-386-5448 e-mail: dultmeier@dultmeier.com • website: dultmeier.com •

www.dultmeier.com

• DAVENPORT, IA

(800) 553-6975

E0533


Winches • Shrink Wrap • Driveway Gong

403

®

Electric Winches FOR 12 VOLT DC OR 110 VOLT AC

SA12000DC

SA9000AC

With Pully Block & Hook

Single Line

D

• May be hand cranked if power supply fails. • Quick plug-in power connector for speed, convenience and security. • Two conveniently located controls for power-up, power-down, freewheel, controlled free load, and automatic locking. • Automatic brakes for safe operation. • High impact polyethylene case for protection of winch and operator. SPECIFICATIONS: • High-torque 12 volt DC motor is provided with 80 amp circuit-breaker overload protection. The electric switch harness uses #8 wire for maximum current carrying capacity.The harness has a 25 foot positive power cable and an 8 foot negative ground cable.The electric switch can be unplugged from the winch housing for storage. • STRONGARM is also available with 110 volt AC motor and 10', 3-wire grounded power cord. • Built-in 3 position switch control provides power in and power out. Winch motors are intended for intermittent use only.

Dead Weight Lift Capacity (Lbs.)

5000

Electric Winch Ratings

4500

SA

120

4000

SA

3500 3000 2500 2000 1500

00

120

SA9000 SA9

000

00

D

DN-NO. VOLTAGE SA9000 12 DC SA9000AC 110 AC SA12000 12 DC SA12000AC 110 AC

DEAD WEIGHT LIFT 3000 lb. Single Line 2700 lb. Single Line 4500 lb. Double Line 4000 lb. Double Line

.

10 20 30 40 50 LENGTH OF CABLE ON REEL (FT.)

For intermittent use only. Above ratings are based on 10' lift. For longer lifts at full capacity occasional motor cooling periods should be allowed.

Accessories D

The winch gear train uses heat-treated sintered iron gears to provide smooth, quiet operation and final drive gears are heattreated high carbon steel for maximum strength. Light-load bearings are permanently lubricated sintered iron, and precision needle bearings are used in the high load areas for low friction and long life. The heavy gauge steel one piece die-formed base has three keyhole mounting slots for use with quick mounting shoulder studs. The chrome-plated heavy gauge steel front frame protects the cable from abrasion. A formed spring steel plate insures level winding of cable onto the reel.

A.C

A.C.

CABLE 25'x7/32" 25'x7/32" 50'x7/32" 50'x7/32"

Part No. DN SA9000DC 12-Volt DC Winch DN SA9000AC 110-Volt AC Winch DN SA12000DC 12-Volt DC Winch DN SA12000AC 110-Volt AC Winch DN 6366 Ball Adapter ........................... DN 6367 12-Volt Dash Mt. Switch Kit.... DN 6371 12-Volt Remote Switch-10’ ft... DN 6372 110-Volt Remote Switch-10' ft.

D

6366 BALL ADAPTER PLATE

For mounting your SA9000 or SA12000 winch on vehicle ball hitch. Fits 1-7/8" and 2" balls.

6371 REMOTE SWITCH Features a solenoid box which allows you to operate your DC winch up to 10' in distance.

D D

6372 REMOTE SWITCH

Provides a 110-volt, 10 ft. hand-held switch unit which can be wired directly to the winch up to 10' in distance.

Wt. 35 lbs. 33 lbs. 38 lbs. 36 lbs. 2 lbs. 3 lbs. 5 lbs. 5 lbs.

Net Ea. $ 403.00 429.30 453.50 485.90 25.90 53.75 210.60 59.85

6367 DASH MOUNTED SWITCH

KIT For electric 12-Volt winches when remote hand switch is not used. Switch not included. Uses switch removed from winch cover.

CAUTION! NOT FOR MOVEMENT OF HUMAN BEINGS!

Shrink Wrap System

Driveway Gong This unmistakable warning gong, lets you know the instant customers drive up for service. It keeps an eye while you are busy doing other work and makes sure that you won’t miss or lose “unseen” customers. Features: Simple-to-install.Operates in any position • Completely wired, ready to plug into 110 volt A.C. outlet • Gong sounds when car wheel passes over the bell hose (not included) but does not keep sounding if wheel stops on the hose • Field tested for over 40,000 trouble-free rings on up to 200 feet of continuous hose • 110 Volts.

D

D

16N0 Air Switch replacement is for driveway bells, doors, etc. Available in weather-tite or liquid-tite, if needed. (see below) A707

Part No. Net Ea. AM A701 Driveway Gong with Air Switch $ 36.90 AM A706 Hose Anchor ........................... 13.50 AM A707 Hose “Y” ................................. 3.54 AM A708 Hose Connector ...................... 1.73 AM A709 Hose End Plug ........................ .64 AM 1342 Bulk Bell Hose.......................... 1.00 AM 16NO Air Switch, Normally Open....... 15.10 AM 16NC Air Switch, Normally Closed..... 25.80

No. SLCPF17 Shrink Wrap bundles small, odd shaped products for shipment. Each layer of stretch film sticks to the next for tight, secure ganging of small packages that won't damage or deface products. 80 gauge. 17” x 1500’. Gauge Std. Part No. Roll Size (Mil) Pkg.

OE SLCPF17 Shrink Wrap.................... 17” x 1500’

.080

1

Net Ea.

$ 19.00

To Deliver the Best Possible Service to Our Customers, Dultmeier Sales

Hose "Y"

Strives to Live Up to A706

A Set of Core Values,

Hose Anchor

One of Which is A708

Hose Connector

DULTMEIER SALES • OMAHA, NE

A709

“Teamwork”

End Plug

(800) 228-9666

www.dultmeier.com

• DAVENPORT, IA

Combining skills, talents and efforts to achieve company success

(800) 553-6975

E0534


Cable • Clamps • Binders • Turnbuckles

404

Drop Forged Turnbuckles

Aircraft Cable

Hot Dip Galvanized

Hook & Eye Style

Galvanized (Stainless Also Available)

Eye & Eye Style Jaw & Jaw Style

EXTRA FLEXIBLE CABLE: Construction is (7) STRANDS of (19) WIRES EACH. Use where high strength & flexibility is required.

Hook & Eye Style Take Closed Part No. Size UP Length Capacity

Net Ea.

KL 386HE KL 126HE KL 586HE KL 3412HE

1200 lbs. 2200 lbs. 3500 lbs. 5200 lbs.

$ 6.31 7.02 9.14 17.70

3/8" 1/2" 5/8" 3/4"

6" 6" 6" 12'

12" 13" 15-1/2" 23"

Breaking Work Cable Strength Load Weight * FeetPer KL-NO. Size Pounds Pounds (Reel) Full Reel 7X19-1/8 1/8" 2000 400 8 250 7X19-3/16 3/16” 4200 840 18 250 7X19-1/4 1/4" 7000 1400 88 250 7X19-5/16 5/16" 9800 1960 85 250 7X19-3/8 3/8" 14400 2880 60 250

Eye & Eye Style Take Closed Part No.

Size

UP

Length

Capacity

Net Ea.

KL 386EE KL 126EE KL 586EE KL 3412EE

3/8" 1/2" 5/8" 3/4"

6" 6" 6" 12"

12" 13" 15-1/2" 23"

1200 lbs. 2200 lbs. 3500 lbs. 5200 lbs.

$ 6.31 7.02 9.14 17.70

Capacity

Net Ea.

* Full Reel Part No. DISCOUNT

KL 7X19-1/8 KL 7X19-3/16 KL 7X19-1/4 KL 7X19-5/16 KL 7X19-3/8 KL 7X19-3/8-1000

Jaw & Jaw Style Take Closed Part No.

Size

UP

Length

KL 349JJ KL 3412JJ

3/4" 3/4"

9" 12"

20" 23"

6 x 19 Fiber Core

Breaking Cable Strength Weight Feet Per KL-NO. Size Pounds Per Reel Full Reel 6X19-1/2 1/2" 21,400 115 250 6X19-5/8 5/8” 32,300 180 250 6X19-3/4 3/4” 46,000 260 250

Designed for Use with Either Grade 70 (S-7) Transport or Grade 80 (T-8) Alloy Tie-Down Chains SCC’s QuikBinder™ Plus is easier to install than standard ratchet load binders.The 3-position pawl offers the user a choice of ratchet extension, ratchet take-up or a “free spin” setting for fast adjustment in either direction. Can be locked to the tie-down chain with a long shank padlock, making it more difficult to tamper with the binder. SCC loadbinders meet all DOT/CVSA/ CCMTA requirements. These load binders are heat treated and proof tested. Handle Length Folded 9.50” 9.50”

Handle Length Straight 13.9” 13.9”

Working Load Limit LBS 7,100 12,000

Wt. Lbs. 11.40 13.90

Full Reel Part No. DISCOUNT

Galvanized Malleable Cable Clamps

Net Ea. $ 38.25 45.70

All steel main ratchet bar 1-1/4" wide, 5/16" thick, 24" action. 1,000 lb. pull. Net weight 8 lbs. Finished in yellow enamel. Packed one to a 2-color display carton. D

Splicing

Part No.

Std. Box/50 Part No. Size Pkg. DISCOUNT Net Ea. MI D86090 1/8" 50 20% $ .19 MI D86190 3/16" 50 20% .21 MI D86290 1/4" 50 20% .32 MI D86390 5/16" 50 20% .47 MI D86490 3/8" 50 20% .58 MI D86690 1/2" 50 20% .83 MI D86890 5/8" 25 20% 1.14 MI D86900 3/4" 25 20% 1.56

Galvanized Thimbles Size * Net Ea.

MI D86095 1/8" $ .12 MI D86195 3/16" .14 MI D86295 1/4" .18 MI D86395 5/16" .28

Part No. Net Ea. DN 405 Controlled Release Holding Ratchet, reduced line breakage......... $ 45.20

(800) 228-9666

Stainless Also Available

Stainless Also Available

Easiest-To-Use Fence Tool

DULTMEIER SALES • OMAHA, NE

$ 1.13 1.74 2.01

For Aircraft Cable or Wire Rope

Fence Stretcher - Splicer

Stretching

Per Foot Cut-Lengths Net Ea.

KL 6X19-1/2 20% KL 6X19-5/8 * 20% KL 6X19-3/4 * 20% * Sold In Reels Only.

D

A DOUBLE RATCHET TOOL for easy tightening and gradual releasing of wire.

20% $ .14 20% .21 20% .33 20% .45 20% .64 * 429.30

Galvanized Wire Rope

SCC QuikBinder™ Plus

Part No. Chain Size Takeup MI H5125-0658 5/16” or 3/8” 6.00" MI H5125-0858 3/8” or 1/2” 6.00”

Per Foot Cut-Lengths Net Ea.

* Sold in 1000 Ft. Reels Only.

5200 lbs. $ 15.95 5200 lbs. 19.45

NOTE: Any combination of jaws, hooks & eyes are available in Sizes 1/4"x4" through 2"x24". For Pad Eyes Order the threaded eye end only.

D

PREFORMED

7 X 19 - EXTRA FLEXIBLE CABLE

Part No.

Size * Net Ea.

MI D86495 3/8” $ .35 MI D86695 1/2" .49 MI D86895 5/8" .87 MI D86905 3/4” 1.16

* LESS 20% ON BOXES OF 50

www.dultmeier.com

• DAVENPORT, IA

(800) 553-6975

E0537


Cargo Security

405

Truck Winch & Tie-Down Straps

Utility Tie-Down Straps

Designed for rugged, heavy-duty transportation uses. Available in winch/ strap or ratchet/strap assemblies.

Utility Tie-Downs are designed for cargo control for farm, automotive, utility, marine and industrial uses. Available in different styles and lengths to meet your specific needs. J-Hook and keeper ends are designed for greater strength and can grab up to 1” diameter. S-Hooks are coated to protect finishes and have a large radius for grabbing.

2” Models 6R27FHY & 10R27FHY D

3” Model 15R27FHY D

2” Ratchet/Strap Assemblies with LoadGard™ treated, yellow webbing and wide easy-to-use handles. Standard with 2” flat hooks on each end. Part No. Buckle Size Work Load Net Ea. SQ 6R27FHY Ratchet 2” x 27’ 2000 lbs. $ 19.25 SQ 10R27FHY Ratchet 2” x 27’ 3300 lbs. 21.85 SQ 15R27FHY Ratchet 3” x 27’ 5000 lbs. 59.55

2" Ratchet Strap

S-Hooks

J-Hooks

Vinyl coated to protect finished surfaces and have a large radius to hook onto handlebars.

Designed for greatest s t r e n g t h . C a p a bl e o f grabbing bars up to 1” in diameter.

Cam Buckle Assemblies are rated for 300 to 1000 lbs. straight pull capacity.

D

Winch /Strap Assemblies. Winches and straps are sold separately to meet your needs. Winches WB16S are designed for WB16P weld-on or bolt-on mounting. Will hold up to 30’ of 2”, 3” or 4” Part No. Wt. Net Ea. strap webbing. SQ WB16S Weld On Winch 10 lbs. $ 20.15 SQ WB16P Bolt On Winch 9 lbs. 21.00

Winch Straps are available in 2”, 3” or 4” widths and feature a flat hook on one end. LoadGard™ treated and yellow webbing. Designed to fit WB16 winch units.

“J” Hook & Keeper

D D

Cam Buckle with S-Hook

Per Pack Part No. Buckle Pack Size Work Load Net Ea. SQ 20B5S Cam, S-Hook 2 1” x 5’ 1000 lbs. $ 14.80 SQ 20B12S Cam, S-Hook 1 1” x 12’ 1000 lbs. 8.50 SQ 20B20S Cam, S-Hook 1 1” x 20’ 1000 lbs. 8.36

Part No. Buckle SQ 20B12JK Cam, J-Hook SQ 20B20JK Cam, J-Hook

Pack 1 1

Size Work Load Net Ea. 1” x 12’ 1000 lbs. $ 9.15 1” x 20’ 1000 lbs. 10.50

Ratchet Buckle Assemblies are rated up to 1500 lbs. straight pull capacity. D

Part No. SQ WS227FHY SQ WS327FHY SQ WS427FHY

Size Working Load Net Ea. 2" x 27' 2300 lbs. $ 14.15 3” x 27’ 4300 lbs. 16.75 4" x 27' 5000 lbs. 18.00

Ratchet J-Hook 1" Ratchet Strap D

D

Part No. Buckle SQ 30R12JK Ratchet, J-Hook SQ 30R20JK Ratchet, J-Hook SQ 50R12JK Ratchet, J-Hook SQ 50R20JK Ratchet, J-Hook

Size Work Load 1” x 12’ 1500 lbs. 1” x 20’ 1500 lbs. 2” x 12’ 3000 lbs. 2” x 20’ 3000 lbs.

Net Ea. $ 11.45 13.10 18.80 21.35

Stake Pocket Anchors Other Support Hook Options Available on Request

• Designed to fit most full sized pickup trucks • Allows for Easy Use with Utility Tie-Down Straps D

• Sold in Packs of Two Anchors

Part No. SQ SPA2 Pocket Anchors, Pack of 2

DULTMEIER SALES • OMAHA, NE

(800) 228-9666

www.dultmeier.com

• DAVENPORT, IA

(800) 553-6975

Net Ea. $ 6.20

E0834


Cargo Security • Paint Equipment

406

Tow/Recovery Straps • Designed to Stretch

• Treated to Prevent Mildew

• Polyester Webbing

• Resists Abrasion

Rubber Tie-Down Bungee Cords

Heavy-Duty Tow Straps are made of the finest polyester webbing. Designed to stretch to reduce shock loads. Specially treated to prevent mildew and dry rot. Resists abrasion. Standard with added wear protection on all loops. Loop x loop ends are standard on all straps except on TS1225H which features forged hooks on each end. Capacities shown are straight pull, maximum breaking strength.

3" S-HOOK

10” to 30” Lengths

Heavy Duty Rubber Tie-Downs are supplied with a 3" -”S” Hook installed in each end. Holes are punched for 1/4" bolts. Bulk Rubber Rope - 7/16" Diameter is available in 150 ft. rolls for fabricating custom length tiedowns. Use with RRH Steel Hooks.

D

Part No.

LENGTH (With Hooks)

N 1014S L LN 1519S LN 2024S LN 3034S LN 3841 LN 150RR LN RRH

TS625

STD. Pkg.

Pkg. Wt.

STD.PKG. With Hooks Discount Net Ea.

10" 50 16 lbs. 20% $ 1.20 15" 50 21 lbs. 20% 1.46 20" 50 25 lbs. 20% 1.54 30" 50 43 lbs. 20% 1.81 3" “S” Hook As Extra ............................. .40 7/16" Rubber Rope (150' length)............... 82.25 Rubber Rope Hooks ............................. .44

Sure Shot Sprayers

D

• Refillable

TS1225H

• Rechargeable • Portable

Part No. Width x Length

** MBS Capacity

SQ TS625 2” x 25’ 6,000 lbs. SQ TS1225H 2” x 25’ * 10,000 lbs. SQ TS1225 2” x 25’ 12,000 lbs. SQ TS1824 3” x 24’ 18,000 lbs. SQ TS2430 3” x 30’ 24,000 lbs. SQ RS3230 4” x 30’ 32,000 lbs. SQ RS4830 6” x 30’ 48,000 lbs. SQ RS8230 6” x 30’ 82,000 lbs. SQ RS8250 6” x 50’ 82,000 lbs.

• Eliminates Aerosol Cans & Disposal Problems.

Net Ea.

$ 20.35 34.30 30.00 45.00 73.10 78.90 160.60 275.80 382.80

* Forged hooks both ends on this model. ** Maximum breaking strength.

1000R (32 oz.)

D

3074DAT 3075DAT

15’ Tow Strap with Hooks 25’ Tow Strap with Hooks

10,000 lbs. 10,000 lbs.

D

Model 1000 (32 oz.) & M2400 (24 oz.) Sprayers are 32 oz. capacity and include a general purpose misting nozzle and a pin stream nozzle. Other nozzles types are available if required. Model 300 Nozzle Assortment Kit includes the following nozzles: 302B, 302C, 305, 501, & 602.

PremiumTow Straps andTow Ropes from Master Lock Automotive. Forged steel hooks with retaining clips where shown. Tow Straps feature 2” wide “Monster Weave” strapping for added strength and durability.

MR 3074DAT MR 3075DAT

M2400 (24 oz.)

An excellent choice for applying a wide variety of liquid products such as bug cleaners, glass cleaners, presoak products, tire/whitewall cleaners, air fresheners, deodorizers, insect repellents, rubber dressings, rust inhibitors and many more. Just fill your canister, pressurize with air, point and spray. Recharge and refill as needed. Sure Shot Sprayers feature Viton® seals and are available in enamelcoated steel construction for non-water products or aluminum construction for water soluble products except ammonia. (Chemical compatibility should be checked prior to use on all models.)

Tow Straps & Tow Ropes

Breaking Part No. Type Strength

D

Nozzles

No. 301 Solid pin stream pattern. For applications where "splash" coverage is preferred. Ideal for inaccessible areas. Effective range up to 20 feet.

No. 302 Standard solid cone pattern. Medium density.

No. 302B Solid cone pattern, heavy density. For use where heavier coverage is preferred such as tire cleaner and machinery cleaner.

No. 302C Solid cone pattern, extra fine density. For use where light coverage with light mist is preferred. Such as dyes or inks.

No. 305 Solid cone pattern, fine density. For use with lighter liquids and applications that require extra uniformity.

No. 501 Flat, fan-shaped pattern, medium to heavy density. For applications that require a uniform film over a large area. Handles heavier viscosity liquids.

No. 602 Adjustable plastic spray nozzle permits finger-tip regulation of spray from extra fine mist to pin stream.

No. 707 Solid cone pattern extra fine full pattern for use with most liquids and some paints. Will spray some heavier type liquids.

Part No. Net Ea. MQ 1000R Red Enamel Steel Sprayer ........ $ 55.40 MQ M2400 Aluminum Silver Sprayer............ 81.75 MQ 300 Nozzle Assortment Kit ............... 28.30 MQ 301 Nozzle as replacement .............. 3.43 MQ 302 Nozzle as replacement .............. 4.65 MQ 302B Nozzle as replacement .............. 4.65 MQ 302C Nozzle as replacement .............. 6.87 MQ 305 Nozzle as replacement .............. 10.50 MQ 501 Nozzle as replacement .............. 12.55 MQ 602 Nozzle as replacement .............. 9.80 MQ 707 Nozzle as replacement .............. 16.40 MQ 10 Repair Kit, complete .................. 22.55

Net Ea.

$ 12.70 17.10

Viton® is a registered trademark of DuPont Performance Elastomers

DULTMEIER SALES • OMAHA, NE

(800) 228-9666

www.dultmeier.com

• DAVENPORT, IA

(800) 553-6975

E0540


Chain and Accessories Bulk Chain

Ag Trailer Chains Trailer Safety Chains designed to meet the requirements of ANSI/ASAE Standard S338.5. All chains come with latch-style grab hooks that will not separate from the towing vehicle. A permanent ID tag shows the gross vehicle pounds for which chain size is intended for use. Made in USA. Part No. Size Rating

PC 8607570 PC 8607190 PC 8607578

Wt.

Net Ea.

Tow Chains

3/8" x 20'

#70

Grade 43 Slip & Grab Hooks

Grab Slip Work Load Min. Min. Hook Hook Chain Limit Proof Break No. No. Size Min. Load Load M804 904 1/4" 2500 4100 7750 M805 905 5/16" 4000 6700 11500 M806 906 3/8" 5100 8500 16200 M808 908 1/2" 8200 13700 26000

Part No. GRAB HOOKS MI M804L 1/4" GR43 MI M805L 5/16" GR43 MI M805T 5/16" GR70 MI M806L 3/8" GR43 MI M806T 3/8" GR70 MI M808L 1/2" GR43 MI M904L MI M905L MI M906L MI M908L

1/4" GR43 5/16" GR43 3/8" GR43 1/2" GR43

PC 5111135 PC 5211235 PC 5211335 PC 5211435 PC 5211535

Std. Std.Pkg. Pkg. DISCOUNT Net Ea. 10 20% $ 3.84 10 20% 5.21 10 20% 5.84 10 20% 6.26 10 20% 6.60 10 20% 12.25

D

3/16" 1/4" 5/16" 3/8" 1/2”

800 lbs. 1,300 lbs. 1,900 lbs. 2,650 lbs. 4,000 lbs.

$ 178.80 134.40 123.80 128.30 134.50

Load Binders — Lever Type —

D

D

For quick, on the job repairs • Connecting log chains • Attaching chain hooks, ring swivels, fittings, etc. • Permanent or temporary use. Max. Approx. Working Weight Part Chain Load Limit Indust. Indust. Pack No. Size In Pounds Pack In Pounds M605 1/4 or 5/16 4,700 5 ea. 3.5 M606 3/8 6,600 5 ea. 4.5 M608 7/16 or 1/2 11,300 5 ea. 5

MI 605 Mid Link MI 606 Mid Link MI 608 Mid Link

99 lbs. 96 lbs. 87 lbs. 88 lbs. 106 lbs.

Functionally superior to any other on the road. Easier to operate locks more securely. The handle closes down away from the load with more leverage. Gives more control in binding and releasing without extra tools. Handles are drop forged from special bar quality steel and heat treated. Hooks are heat treated alloy steel. Meets all DOT specifications.

Std. Std. Pkg. Pkg. DISCOUNT Net Ea. 10 20% $ 7.42 10 20% 9.19

Part No.

250’ 141’ 92’ 63’ 40’

Per Trade Working Wt. Per Feet Per Carton Part No. Size Load Carton Carton Net Ea. PC 60420-322 2/0 520 36 lbs. 125 $ 81.15

Chain Connecting Links

Hot forged, heat treated tempered. Pins are also heat treated. Easy to install or remove. Made for use on all Hi-Test, Proof Coil, & BBB Chain. Bright Zinc plated to prevent rusting and for cleaner handling.

$ 151.50 163.70 176.80 348.50

Straight Link Coil Chain has longer links than Proof coil. Diameter is .192”. Can be used as implement chain, guard rail or animal tie chain.

Slip Hooks with Latch

Grade 70

105 lbs. 119 lbs. 124 lbs. 270 lbs.

— Zinc Plated —

Grade 43 Clevis

Chain Working Load Part No. Size Limit (lbs.) MI 66273 5/16" 3,900 MI 66373 3/8" 5,400

150’ 100’ 75’ 100’

Straight Link Coil Chain

20% $ 4.40 20% 5.73 20% 7.89 20% 16.05

10 10 10 10

PC 50312-272 1/4" 2,600 lbs. PC 50313-275 5/16" 3,900 lbs. PC 50314-278 3/8" 5,400 lbs. PC 50315-280 1/2” 9,200 lbs.

GRADE 30 PROOF COIL CHAIN-Zinc Plated

SLIP HOOKS

115 lbs. $ 285.90 118 lbs. 210.10 120 lbs. 196.00 260 lbs. 388.90 563 lbs. 1133.00

150’ 100’ 75’ 100’ 150’

GRADE 43 HIGH TEST CHAIN-Self Colored

Much Stronger Than Ordinary Hooks: the pins are made of hi-strength steel and heat treated for use on "Hi-Test" chain. Install with screwdriver or pliers - eliminates connecting links.

D

Grade 70 Transport Chain is an ideal choice for binding, tie-downs, towing and construction use. Higher load ratings than High Test or Proof Coil. Yellow zinc plating. 4-1 Design Factor.

PC 50412-572 1/4" 3,150 lbs. PC 50403-575 5/16" 4,700 lbs. PC 50414-578 3/8" 6,600 lbs. PC 50416-540 1/2” 11,300 lbs. PC 50418-580 5/8” 15,900 lbs.

Net Ea.

32 lbs. $ 48.50

6600

Grade 30 Proof Coil

GRADE 70 TRANSPORT CHAIN-Yellow Zinc Finish

D

PC 52623-533

Grade 43 High Test

Working Feet Weight Per-Pail Part No. Size Load Per Pail Per Pail Net Ea.

With Grab Hook Each End

Wt.

Grade 70 Transport

Grade 30 Proof Coil Chain is a general utility chain for use as log chain, tow and switch and frame use. Bright zinc plating. 4-1 Design Factor.

Binder Chains - Grade 70 • “Peer-Gold” Finish

D

Transport, High Test and Proof Coil Chain are sold in pails or drum lengths shown. Note: Bulk Chain shown below is “not” approved for overhead lifting! Longer lengths available as needed.

Grade 43 High Test Chain is designed for applications such as wrecking chain, boomer chain and other applications requiring higher strength ratios than Proof Coil Chain. Self-colored, no plating. 3-1 Design Factor.

5/16” x 60” 16,100 lb. 7 lbs. $ 51.80 3/8” x 59” 20,200 lb. 9 lbs. 54.30 1/2” x 70” 40,500 lb. 17 lbs. 87.40

Working Part No. Chain Size Grade Load-Lbs.

407

Std. Pkg. DISCOUNT

Part No.

Net Ea.

(800) 228-9666

Std. Pkg. Wt. Net Ea.

MI 320104 1/4" Load Binder MI 320105 3/8" Load Binder MI 106 1/2" Load Binder

20% $ 7.58 20% 16.60 20% 18.80

DULTMEIER SALES • OMAHA, NE

Proof Minimum Working Test Ultimate Load Load Breaking Part Weight Handle Take Limit Minimum Strength Factory No. Chain Size & Grade In Lbs. Lgth. Up (Lbs.) (Lbs.) (Lbs.) Pack 320104 1/4" Hi-Test 43 2-1/2 11-1/4" 3" 2,600 4,300 7,800 6 320105 5/16" Transport 70 or 3/8" Hi-Test 43 8-1/4 16" 3-3/4" 5,400 10,800 19,000 6 M106 3/8" Transport 70 or 1/2" Hi-Test 43 11-1/4 18-1/2" 4-1/4" 9,200 15,300 28,000 6

www.dultmeier.com

• DAVENPORT, IA

6 6 6

3 lbs. $ 14.20 8 lbs. 20.75 11 lbs. 31.90

(800) 553-6975

E0538


Roller Chain

408

— USA Mfg. & Import — High Quality Roller Chain. Steel, stainless steel, single and double strand. Available in 10’ or 100’ lengths. Imported or USA made. Connecting and offset links for all sizes and types are available for ease of installation. All chain shown below is “Rivet Style” construction. All chain is pre-lubricated for extended wear life. Heavy H Chains are produced with thicker link plates than standard ANSI chain. This design improves stress distribution and increases fatigue strength. USA Mfg. Chain is available in sizes up to 240 and up to 6 strands. Specified cut lengths are also available on all USA Mfg. Chain if needed. For added corrosion resistance, Nickel or Silver Shield plating is also available on all USA chain.

Roller Chain - Steel & Stainless Steel

DOUBLE STRAND “W”

CONNECTING LINK Used to assemble chain strands with an even number of pitches.

OFFSET LINK Used to assemble chain strands with on odd number of pitches. Pitch

Imported

USA Mfg.

Imported Chain - Single Strand Part No. GG 35 GG 41 GG 41-100 GG 40 GG 40-100 GG 50 GG 50-100 GG 60 GG 60-100 GG 80 GG 100 GG 120 GG 35SS GG 40SS GG 50SS GG 60SS

Material Steel Steel Steel Steel Steel Steel Steel Steel Steel Steel Steel Steel Stainless Stainless Stainless Stainless

Ft. Strands Pitch “W” Per Box 1 3/8" .189” 10’ 1 1/2” .252” 10’ 1 1/2” .252” 100’ 1 1/2” .313” 10’ 1 1/2” .313” 100’ 1 5/8” .376” 10’ 1 5/8” .376” 100’ 1 3/4” .500” 10’ 1 3/4” .500” 100’ 1 1” .627” 10’ 1 1-1/4” .755” 10’ 1 1-1/2” 1.00” 10’ 1 3/8” .189” 10’ 1 1/2” .313” 10’ 1 5/8” .376” 10’ 1 3/4” .500” 10’

Imported Chain - Heavy Series, Single Strand Part No. GG 50H GG 60H GG 80H GG 100H

Material Steel Steel Steel Steel

Strands Pitch 1 5/8" 1 3/4” 1 1” 1 1-1/4”

Ft. “W” Per Box .376” 10’ .500” 10’ .627” 10’ .755” 10’

Imported Chain - Extended Pitch, Single Strand Ft. Part No. Material GG A2040 Steel GG A2040-100 Steel GG A2050 Steel GG A2050-100 Steel GG A2060 Steel

Strands Pitch 1 1" 1 1” 1 1-1/4” 1 1-1/4” 1 1-1/2”

“W” Per Box .312” 10’ .312” 100’ .376” 10’ .376” 100’ .500” 10’

Imported Chain - Double Strand Part No. GG 40-2 GG 50-2 GG 60-2 GG 80-2 GG 100-2

Material Steel Steel Steel Steel Steel

Strands Pitch 2 1/2" 2 5/8” 2 3/4” 2 1” 2 1-1/4”

Ft. “W” Per Box .313” 10’ .376” 10’ .500” 10’ .627” 10’ .755” 10’

Wt. Per Box 2.3 lbs. 2.6 lbs. 26 lbs. 4.4 lbs. 44 lbs. 7 lbs. 70 lbs. 10 lbs. 103 lbs. 18 lbs. 25 lbs. 41 lbs. 2.3 lbs. 4.2 lbs. 7.0 lbs. 10 lbs.

Per Box Net Ea. $ 11.60 10.80 104.60 12.35 125.30 18.70 158.10 24.20 204.60 44.30 66.30 101.60 94.75 100.50 150.50 176.30

Wt. Per Box 9 lbs. 13 lbs. 21 lbs. 29 lbs.

Per Box Net Ea. $ 42.40 30.45 57.00 84.60

Wt. Per Box 3 lbs. 30 lbs. 5 lbs. 50 lbs. 7 lbs.

Per Box Net Ea. $ 11.90 115.70 17.15 143.00 21.85

Wt. Per Box 8 lbs. 14 lbs. 20 lbs. 35 lbs. 50 lbs.

Per Box Net Ea. $ 24.80 37.50 48.50 87.60 132.90

Imported - Single Strand Part No. Material Net Ea. GG 35-OL Steel $ .82 GG 41-OL Steel .76 GG 40-OL Steel .88 GG 50-OL Steel 1.04 GG 60-OL Steel 1.39 GG 80-OL Steel 2.60 GG 100-OL Steel 3.81 GG 120-OL Steel 6.08 GG 35-OLSS Stainless 4.75 GG 40-OLSS Stainless 3.59 GG 50-OLSS Stainless 4.11 GG 60-OLSS Stainless 5.13 Imported - Double Strand Part No. Material Net Ea. GG 40-2-OL Steel $ 1.84 GG 50-2-OL Steel 2.22 GG 60-2-OL Steel 3.22 GG 80-2-OL Steel 4.85 GG 100-2-OL Steel 8.94 Imported - Heavy, Single Strand Part No. Material Net Ea. GG 50H-OL Steel $ 1.70 GG 60H-OL Steel 1.60 GG 80H-OL Steel 3.02 GG 100H-OL Steel 5.85 Imported - Extended, Single Strand Part No. Material Net Ea. GG A2040-OL Steel $ 1.06 GG A2050-OL Steel 1.26 GG A2060-OL Steel 2.17

Wt. Per Box Per Box Net Ea. 13 lbs. $ 140.30 23 lbs. 230.30 32 lbs. 372.70

USA MFG. - Extended Pitch, Single Strand

Wt. Per Box 3.2 lbs. 5.1 lbs. 7.1 lbs.

USA MFG. Chain - Double Strand

Wt. Per Box Per Box Net Ea. 8.6 lbs. $ 163.20 14 lbs. 181.80 20 lbs. 292.40 38 lbs. 524.00 50 lbs. 828.00

Part No. Material GG A2040US Steel GG A2050US Steel GG A2060US Steel

Part No. Material GG 40US-2 Steel GG 50US-2 Steel GG 60US-2 Steel GG 80US-2 Steel GG 100US-2 Steel

Strands Pitch 1 3/8" 1 1/2” 1 1/2” 1 1/2” 1 1/2” 1 5/8” 1 5/8” 1 3/4” 1 3/4” 1 1” 1 1-1/4” 1 1-1/2”

Strands Pitch 1 3/4” 1 1” 1 1-1/4”

Strands Pitch 1 1" 1 1-1/4” 1 1-1/2”

Strands Pitch 2 1/2" 2 5/8” 2 3/4” 2 1” 2 1-1/4”

Ft. “W” Per Box .189” 10’ .252” 10’ .252” 100’ .313” 10’ .313” 100’ .376” 10’ .376” 100’ .500” 10’ .500” 100’ .627” 10’ .755” 10’ 1.00” 10’ Ft. “W” Per Box .500” 10’ .627” 10’ .755” 10’ Ft. “W” Per Box .312” 10’ .376” 10’ .500” 10’ Ft. “W” Per Box .313” 10’ .376” 10’ .500” 10’ .627” 10’ .755” 10’

Per Box Net Ea. $ 57.80 51.70 439.40 64.90 554.00 79.90 656.00 102.30 852.00 185.80 310.10 418.20

Per Box Net Ea. $ 63.60 71.70 102.90

Links USA Made • Offset • Connecting OFFSET LINKS

Imported - Single Strand Part No. Material Net Ea. GG 35CL Steel $ .48 GG 41CL Steel .51 GG 40CL Steel .52 GG 50CL Steel .73 GG 60CL Steel .81 GG 80CL Steel 1.52 GG 100CL Steel 2.22 GG 120CL Steel 3.62 GG 35CLSS Stainless 1.75 GG 40CLSS Stainless 1.77 GG 50CLSS Stainless 2.68 GG 60CLSS Stainless 3.24 Imported - Double Strand Part No. Material Net Ea. GG 40-2CL Steel $ .94 GG 50-2CL Steel 1.23 GG 60-2CL Steel 1.81 GG 80-2CL Steel 2.94 GG 100-2CL Steel 5.14 Imported - Heavy, Single Strand Part No. Material Net Ea. GG 50HCL Steel $ .83 GG 60HCL Steel .89 GG 80HCL Steel 2.09 GG 100HCL Steel 3.26 Imported - Extended, Single Strand Part No. Material Net Ea. GG A2040CL Steel $ .69 GG A2050CL Steel .84 GG A2060CL Steel 1.16

(800) 228-9666

USA MFG. Chain - Heavy Series, Single Strand

Part No. Material GG 60HUS Steel GG 80HUS Steel GG 100HUS Steel

CONNECTING LINKS

DULTMEIER SALES • OMAHA, NE

Wt. Per Box 2.5 lbs. 3.0 lbs. 30 lbs. 4.4 lbs. 44 lbs. 7 lbs. 74 lbs. 11 lbs. 112 lbs. 20 lbs. 28 lbs. 41 lbs.

Part No. Material GG 35US Steel GG 41US Steel GG 41US-100 Steel GG 40US Steel GG 40US-100 Steel GG 50US Steel GG 50US-100 Steel GG 60US Steel GG 60US-100 Steel GG 80US Steel GG 100US Steel GG 120US Steel

Links Imported • Offset • Connecting OFFSET LINKS

USA MFG. Chain - Single Strand

CONNECTING LINKS

USA MFG. - Single Strand Part No. Material Net Ea. GG 35US-OL Steel $ 2.87 GG 41US-OL Steel 5.82 GG 40US-OL Steel 4.24 GG 50US-OL Steel 4.50 GG 60US-OL Steel 5.30 GG 80US-OL Steel 10.40 GG 100US-OL Steel 15.55 GG 120US-OL Steel 20.35

USA MFG. - Single Strand Part No. Material Net Ea. GG 35US-CL Steel $ 1.82 GG 41US-CL Steel 1.25 GG 40US-CL Steel 1.57 GG 50US-CL Steel 1.88 GG 60US-CL Steel 2.42 GG 80US-CL Steel 3.37 GG 100US-CL Steel 6.27 GG 120US-CL Steel 9.47

USA MFG. - Double Strand Part No. Material Net Ea. GG 40US-2-OL Steel $ 9.45 GG 50US-2-OL Steel 11.00 GG 60US-2-OL Steel 12.75 GG 80US-2-OL Steel 22.95 GG 100US-2-OL Steel 36.55

USA MFG. - Double Strand Part No. Material Net Ea. GG 40US-2-CL Steel $ 2.94 GG 50US-2-CL Steel 3.28 GG 60US-2-CL Steel 4.22 GG 80US-2-CL Steel 8.51 GG 100US-2-CL Steel 12.35

USA MFG.- Heavy, Single Strand Part No. Material Net Ea. GG 60HUS-OL Steel $ 6.46 GG 80HUS-OL Steel 11.55 GG 100HUS-OL Steel 17.70

USA MFG. - Heavy, Single Strand Part No. Material Net Ea. GG 60HUS-CL Steel $ 2.64 GG 80HUS-CL Steel 3.93 GG 100HUS-CL Steel 6.26

USA MFG. - Extended, Single Strand Part No. Material Net Ea. GG A2040US-OL Steel $ 6.00 GG A2050US-OL Steel 7.00 GG A2060US-OL Steel 8.98

USA MFG.- Extended, Single Strand Part No. Material Net Ea. GG A2040US-CL Steel $ 2.18 GG A2050US-CL Steel 2.62 GG A2060US-CL Steel 3.44

www.dultmeier.com

• DAVENPORT, IA

(800) 553-6975

E0820


Motor Starters • Relays • Contactors Manual Motor Starters

FEATURES: • 4-Point AC Coil can be wired on top, bottom or diagonally.

FullVoltage Starters in Non-Metallic Enclosure are supplied complete with three-pole, single phase, sensitive, thermal overload relay. These enclosures have knockout entries on the upper and lower surfaces and must be completed with adequate wire conduits to maintain the enclosure degree of protection. Electrical Life is 500,000 cycles at the maximum rate of 600 cycles/hour. All models have IP65 (Washdown Duty) rating.

• Use 3RU11 solid state overload relays below to create starters (See Below). • Snap-on Auxiliary Contacts, surge suppressors. • Front and Side Mounted Auxiliary Contacts from sizes 3RT102 thru 3RT104.

3RT102

40

2

1

120 10 15 20 30 75 100 -

-

Part No. GO 3RT1017-1AB01 GO 3RT1026-1AC20 GO 3RT1035-1AC20 GO 3RT1046-1AC20 GO 3RT1026-1AK60 GO 3RT1035-1AK60 GO 3RT1046-1AK60

Coil Voltage Size Net Ea. 24 Volt 00 $ 53.75 24 Volt 0 79.05 24 Volt 2 135.90 24 Volt 3 386.90 120 Volt 0 78.65 120 Volt 2 128.80 120 Volt 3 387.00

Thermal Overload Relays for 3RT1 Contactors Above • Auxiliary Contacts: 1 NO + 1NC • Manual/Automatic RESET • Switching Position Indication • TEST Function

Time Delay Relays

For Size 0 Setting Part No. Range Net Ea. GO 3RU1126-1GB0 4.5 - 6.3 $ 48.85 GO 3RU1126-1HB0 5.5 - 8.0 40.35 GO 3RU1126-1JB0 7.0 - 10 38.55 GO 3RU1126-1KB0 9.0 - 12.5 48.45 GO 3RU1126-4AB0 11 - 16 48.85 GO 3RU1126-4BB0 14 - 20 43.95 GO 3RU1126-4CB0 17 - 22 49.05 GO 3RU1126-4DB0 20 - 25 43.40

D

• STOP Button • Phase Failure Sinsitivity • Integrated, sealable Cover • CLASS 10

For Size 2 Part No. GO 3RU1136-1KB0 GO 3RU1136-4AB0 GO 3RU1136-4BB0 GO 3RU1136-4DB0 GO 3RU1136-4EB0 GO 3RU1136-4FB0 GO 3RU1136-4GB0 GO 3RU1136-4HB0

Setting Range Net Ea. 9 - 12.5 $ 63.60 11 - 16 63.60 14 - 20 67.65 18 - 25 55.30 22 - 32 71.70 28 - 40 74.25 36 - 45 84.80 40 - 50 69.20

Hour Meters Compact, top quality elapsed time indicators for implementing an efficient preventive maintenance program on your pumps or equipment.

D

D

6A857

5X852 Base

Net Ea. 24-Volt Time Delay........................ $ 77.50 Base for TDB24AL........................ 7.68 120 Volt Time Delay...................... 58.40

6X144

NON-RESETTABLE

Model 6X143: Cramer Brand. 115 Volt push button resettable meter. Registers elapsed time up to 9999.9 hours. 2-1/2" square bezel face. Length is 3-1/2" front to back.

Single Module for Self-Assembly with LED & Mechanical Indicator. 5-Pin Flat Plug

Model 6X144: Cramer Brand. 115 Volt non-resettable meter. Registers elapsed time up to 99999.9 hours. 3-1/2" round or square bezel face. Length is 2-3/4" front to back. Model 3410-1000: 24 Volt non-resettable meter. Registers elapsed time up to 99999.9 hours. 2-13/16" round bezel face. Length is 2-3/4" front to back.

Rated Control Contact Contact Part No. Supply Voltage Configuration Rating Net Ea. GO 3TX7110-5JC13 24VAC SPDT 15A $ 11.65 GO 3TX7110-5JF13 110 VAC SPDT 15A 12.35 GO 3TX7144-1E7 Socket for 3TX7110......................................... 7.88 DULTMEIER SALES • OMAHA, NE

(800) 228-9666

These hour meters are available in 24 Volt or 115 Volt and in resettable and non-resettable models. Counter wheels have large, easyto-read numbers. Whole numbers are white against black background. Decimal number is black on white background.

High impact housing with round or square faces. All models include 6" wire leads. All models are UL listed.

Relays D

1

— Call for Information on Other Sizes —

Time Delay Relays are for use with auto shut-down panels for prep systems, tire applicators, etc. Designed to time out and shut-off systems after a determined amount of time. Adjustable shut-off time settings. Solid state design. Model TDB24AL Eight Prong Relay is rated for 24 volts. This unit is adjustable from 1 second to 1022 seconds shut-down. Normally used in auto shut-down panels for prep units. For new installations, 5X852 support base is also required. Model 6A857 is rated for 120 volts. This unit is adjustable from .5 to 10 second shut-off. Ideal for use in tire applicator systems.

Part No. DU TDB24AL GN 5X852 GN 6A857

20

-

D

D

3 7-1/2 7-1/2 15

60 3 7-1/2 10 15 30 40 -

— Other Sizes & Configurations Available —

TDB24AL

D

Enclosed Single Phase Auxiliary Amp Ratings HP Ratings Three Phase HP Ratings Contacts AC-1 115V 230V 200V 230V 460V 575V NO NC 3RT101 22 1/2 2 3 3 7-1/2 10 1 -

3RT103 3RT104

HP Amp Part No. Voltage Phase Rating Range Net Ea. CE M2P032-B-B1 115 1 3 - $ 307.60 CE M1P018-C-B1S 230 1 3 13-18 222.80 CE M2P032-C-B3S 230 1 5 20-25 307.60 CE M2P032-C-B4 230 1 7.5 24-32 307.60 CE M1P009-C-A9 230 3 3 6.3-10 179.00 CE M1P018-C-B0 230 3 5 9-14 201.60 CE M2P025-C-B1 230 3 7.5 13-18 243.40 CE M2P032-C-B3 230 3 10 20-25 307.10 CE M1P009-D-A7 460 3 5 2.5-4 179.00 CE M1P018-D-A9 460 3 7.5 6.3-10 202.70 CE M1P018-D-B0 460 3 10 9-14 202.70 CE M2P025-D-B2 460 3 15 17-23 243.40 CE M2P032-D-B3 460 3 20 20-25 307.60

D

SIEMENS

3RT1 Contactors

Designed for On/Off Control of Motors from 1 - 30 HP

D

409

Part No. Voltage Net Ea. GN 6X143 Resettable Meter.......... 115 $ 139.90 GN 6X144 Non-resettable Meter.... 115 96.35 NP 3410-1000 Non-resettable Meter.... 24 26.80

www.dultmeier.com

• DAVENPORT, IA

(800) 553-6975

E0708


VFD’s • Switches

410 Variable Frequency Drive/Inverters

Selector & Push Button Switches Features: • • • • • • • •

(VFD’s) Variable Frequency Drives (VFD’s) reduce energy consumption by controlling the frequency being supplied to electric motors. Energy savings can be quite substantial and tax rebates are often available. Soft-start feature allows motors to “ramp-up” to required speed vs. immediate full amp draw as occurs with typical motor starters. This reduces energy consumption and reduces wear and tear on system components. VFD/Inverters replace existing motor starters • Extend system component life by operating only on demand • Soft-start design reduces power demand • 50hz to 60hz compatible • Easily programmed in the field to fit system requirements • Controls motor speed and torque • Available for Three Phase Applications up to 150 HP • Multiple preset speeds if required • Compact size is comparable to standard type motor starters. Nema 4 Enclosures for food grade and wash down duty are also available.

Ambient operating temp: -10 to +140˚ F. (-25 to +60˚ C.) Any mounting position allowed. Polyamide and polycarbonate material. Compliant with standards: IEC/EN 60947-1, IEC/EN 60947-5-1. Mechanical Life: 300,000 cycles. Self-cleaning with dual effect, wiping and oscillating. Rated insulation voltage: 690V. UL designation: A600 Q600

D

Operational power in AC15: [V] 12 24 48 120 240 400 480 [A] 6 6 6 6 3 1.9 1.5

With Nema 1 Enclosure

Illuminated Button Operators Flush (with side visibility), momentary (complete with mounting adapter).

— Must Choose Contactor Element Below— Part No. Color Net Ea.

CE 8LP2TBL103 Green $ 10.35 CE 8LP2TBL104 Red 8.93 CE 8LP2TBL105 Yellow 8.95 CE 8LP2TBL106 Blue 10.35 CE 8LP2TBL107 Transparent 8.95

D

8LM2TC01 D

LED Integrated Lamps Without mounting adapter. Steady light. (Flashing light available)

SM PLUS No Enclosure

Part No.

NOTE: All Units are for Indoor Use. D

3 Phase VFD/Inverters with Nema 1 Enclosures Output Part No. HP Phase Voltage Amps CE 174614.00 3 3 200-240V 9.6 CE 174615.00 5 3 200-240V 16.5 CE 174616.00 7-1/2 3 200-240V 23 CE 174617.00 10 3 200-240V 29 CE 174618.00 15 3 200-240V 42 CE 174619.00 20 3 200-240V 54 CE 174569.00 25 3 200-240V 68 CE 174571.00 30 3 200-240V 80 CE 174576.00 40 3 200-240V 104 CE 174627.00 10 3 400-480V 14 CE 174628.00 15 3 400-480V 21 CE 174629.00 20 3 400-480V 27 CE 174630.00 25 3 400-480V 35 CE 174565.00 30 3 400-480V 40 CE 174567.00 40 3 400-480V 52 CE 174593.00 50 3 400-480V 65 CE 174572.00 60 3 400-480V 77 CE 174580.00 75 3 400-480V 96

8LM2TLB6

Wt. Net Ea. 3.8 lbs. $ 346.00 4.2 lbs. 411.00 7.3 lbs. 549.00 7.3 lbs. 672.00 20 lbs. 1004.00 20 lbs. 1263.00 38 lbs. 2564.00 44 lbs. 3060.00 130 lbs. 4980.00 7.3 lbs. 672.00 20 lbs. 979.00 20 lbs. 1215.00 20 lbs. 1460.00 21 lbs. 2678.00 35 lbs. 3071.00 54 lbs. 3703.00 67 lbs. 4171.00 185 lbs. 5887.00

Screw termination without mounting adapter. Normally open or closed.

D

Up to 6 auxiliary contacts can be fitted on the mounting adapter: 3 on the left and 3 on the right

8LM2TC01 Part No.

Description

Net Ea.

CE 8LM2TC01 CE 8LM2TC10

Normally Closed (Red) Normally Open (Green)

$ 5.91 5.91

— For Use with Push Button or Selector Switches —

Switches

Complete with Mounting Adapter Switch Positions: Maintained position

Key withdrawal position

Spring return position

3-Position (includes Off)

Part No.

DULTMEIER SALES • OMAHA, NE

Wt. Net Ea. 4 lbs. $ 556.00 4 lbs. 814.00 8 lbs. 986.00 8 lbs. 1263.00 13 lbs. 1589.00 14 lbs. 2106.00 4 lbs. 2564.00 5 lbs. 3060.00 8 lbs. 4980.00 8 lbs. 1370.00 13 lbs. 1571.00 14 lbs. 2046.00 14 lbs. 1657.00 14 lbs. 2439.00

(800) 228-9666

Net Ea.

Contact Elements

Position Type

CE 8LP2TS120 Maintained CE 8LP2TS221 Spring Return CE 8LP2TS320 Key Withdrawal CE 8LP2TS130 3-Position *Other positions available.

3 Phase VFD/Inverters, No Enclosure Output Part No. HP Phase Voltage Amps CE 174458.00 3 3 200-240V 9.6 CE 174446.00 5 3 200-240V 15.2 CE 174438.00 7-1/2 3 200-240V 22 CE 174439.00 10 3 200-240V 28 CE 174429.00 15 3 200-240V 42 CE 174430.00 20 3 200-240V 54 CE 174463.00 3 3 400-480V 4.8 CE 174447.00 5 3 400-480V 7.6 CE 174440.00 7-1/2 3 400-480V 11 CE 174441.00 10 3 400-480V 14 CE 174431.00 15 3 400-480V 21 CE 174432.00 20 3 400-480V 27 CE 174433.00 25 3 400-480V 34 CE 174500.00 30 3 400-480V 40

Color

CE 8LM2TLB3 Green $ 8.33 CE 8LM2TLB4 Red 9.19 CE 8LM2TLB5 Yellow 9.30 CE 8LM2TLB6 Blue 9.18 CE 8LM2TLB8 White 10.50

Net Ea.

$ 11.55 14.65 33.80 13.80

— Must Choose Contact Element Above —

Labels for Selector Switches Part No.

Description

Net Ea.

CE 8LM2TAI233 AUTO-MAN $ 1.50 CE 8LM2TAI234 AUTO-0-MAN 1.50 CE 8LM2TAGB236 OFF-ON 1.50 CE 8LM2TAGB232 STOP-START 1.50 CE 8LM2TAU100 Label Holder 1.67 *Custom Labels are Available •

www.dultmeier.com

• DAVENPORT, IA

(800) 553-6975

Label

Label Holder

D

Lockout Switch

E0707


LED Tube Lighting

411

Waterproof LED Tube Lights for almost any application. Brighter than Metal Halide bulbs at lower wattage. Waterproof design is ideal for outside use or wet environments like car and truck wash bays. LED lights have significantly lower power consumption than other light sources. UL and DLC listed for eligibility with state and utility rebate programs.

• Minimal Maintenance, No Bulbs or Ballasts to Replace

• Lower Operating & Repair Costs Mean Fast Return on Your Investment

• Long Lasting 100,000 Hour Lifespan

• Lights are Secured in Heavy-Duty, Water-Proof Tubes

• Lower Heat Output Reduces Cooling Costs & Further Reduces Costs

• 100 to 277 Volt & UL Listed

• Made in USA with 5 Year Warranty

• Ships by UPS or FEDEX

• Up to 70% Lower Power Consumption

• Can Be Combined for Larger Lighting Needs

LED lights have more even light distribution meaning fewer hot spots and dark areas. Highly directional which allows light to be focused if required. Instant-On means no waiting for warm up. Mercury-free, lead-free and silent operation, NO HUM. No UV or infrared radiation. Efficient operation at all temperatures. * Available with and without dimming option to dim light output when bags are not in use.

Minimal Maintenance – No Bulbs or Ballast to Replace! LED Tube Lights are ideal for Tunnel Applications as the heavy-duty, waterproof tubes are perfect for harsh wet environments.

BAY16. LED Package includes (2) 8’ sections, (2) 25’ cables and mounting hardware. 160 watt output equal to 400 watt metal halide. Designed for 16’ run. Ideal for small areas like vac islands, vending areas and pet washes. BAY32. LED Package includes (4) 8’ sections, (2) 4’ jumpers and mounting hardware. 320 watt output equal to 1000 watt metal halide. Designed for 32’run.Can be used for standard size car wash bays, 22’- 28’.

BAY48. LED Package includes (6) 8’ sections, (4) 1’ jumpers and mounting hardware. 480 watt output equal to 1500 watt metal halide. Designed for 48’ run. Can be used for large self-serve or automatic bays, 26’ - 36’.

BAY64. LED Package includes (8) 8’ sections, (6) 4’ jumpers and mounting hardware. 640 watt output equal to 2000 watt metal halide. Designed for 64’ run. Can be used for large self-serve or automatic bays, 45’ - 52’

D

External Power Supply with Integral Wiring Boxes

Push-and-Click IP68 Connectors

All feature Push and Click IP68 connectors for quick and easy installation. Part No.

Leader Cable (Multiple Lengths) DULTMEIER SALES

WPX Connectors OMAHA, NE (800)

228-9666

Linear Feet

Power Supplies

Wt.

16’ 32’ 48’ 64’

1 1 1 2

9 lbs. 19 lbs. 27 lbs. 54 lbs.

GG BAY16 GG BAY32 GG BAY48 GG BAY64

* BAY32 & BAY48 Available with Dimming Option.

DAVENPORT, IA (800)

553-6975

www.dultmeier.com

Net Ea.

$ 706.00 1312.00 2015.00 2722.00

E0982


LED Lighting Products

412

Save Money and Improve Light at Your Facilities with LED Lighting Products! Complete line from wall packs, pole and canopy fixtures, tube lights and retrofit kits. No longer will you have to replace bulbs or ballasts. 40% to 70% less power used than traditional Metal Halide or High Pressure Sodium bulbs. High quality, beautiful, natural and uniform. Designed for interior or exterior applications as noted. Rated for 100-277 volts.

8’ Tube Lights

Tube Light Kits

Retrofit Kits Retrofit Kits. Designed to fit into your existing Metal Halide wall or ceiling fixtures. LEDU is a universal kit that is field adjustable from 30 to 95 watts. Fits into Hubbell or Lithonia, 100 through 250 watt wall pack cases. RC100S is designed to retrofit into Scottsdale wall or ceiling fixtures, 320 to 4000W.

D

LED Part No. Kit Wattage Lumens Net Ea. MH LEDKITU Hubbell/Lithonia.... 30-85W 3,500-8,000 $ 298.00 MH RC100S Scottsdale............. 100W 10,000 380.80

Tube Light Kits. Can be used indoor, outdoor and in wet environments. Great for self-serve bays, tunnel washes, automatics, garages or shops. Easy to install with “click-in” connectors and cables. Can be mounted to walls or ceilings. 115 Lumens/watt. 5-Year warranty. 100,000 hour life. Kits include 4’x4’ or 4’x8’ tubes, jumpers, connectors, power driver and mounting clips. Part No. Tubes Wattage Lumens Net Ea. MH TUBE16 (4) 4’ & Accessories.......... 160W 18,000 $ 624.00 MH TUBE24 (2) 4’, (2) 8’ & Accessories 240W 27,000 935.00 MH TUBE32 (4) 8’ & Accessories.......... 320W 36,000 1210.00 MH TUBE64 (8) 8’ & Accessories.......... 640W 72,000 2220.00

$ 0.10 $ 0.12 $ 0.15 $ 0.20 $ 0.25

Model XSP42W is designed for outdoor wall mounting. 42W, 4100 Lumens.

Model CXB is a 16” tear drop ceiling fixture for outdoor use. 230W, 97,000 Lumens.

D

CPY250

Size Of Light 50W

for Walls and Canopies

Model CPY250 is designed for outdoor canopies and soffits. 122W, 12,000 Lumens.

Annual Electricity Usage Cost Per KwH

Complete LED Fixtures

$21.90 $26.28 $32.85 $43.80 $54.75

80W

130W

$35.04 $42.05 $52.56 $70.08 $87.60

$56.94 $76.65 $109.50 $175.20 $68.33 $91.98 $131.40 $210.24 $85.41 $114.98 $164.25 $262.80 $113.88 $153.30 $219.00 $350.40 $142.35 $191.63 $273.75 $438.00

175W

250W

400W D

D

XSP42W

Assumptions: 12 hours a day usage, 365 days a year.

Cost Savings Example:

Replace a 400W Metal Halide with 130W Mile High LED Light; assume $0.15 KwH MH Annual Electricity Costs: $262.80 LED Annual Electricity Costs: $ 85.41 Annual Electricity Savings: $177.39 Plus no annual bulb or ballast changes.

CXB LED Replaced Part No. Type Wattage Wattage Lumens Net Ea. MH XSP42W Wall/Pole 42W 175W 4,100 $ 261.60 MH CPY250 Wall/Canopy 122W 500W 13,000 403.00 MH CXB Ceiling 230W 1000W 23,000 473.70

DULTMEIER SALES

OMAHA, NE (800)

228-9666

DAVENPORT, IA (800)

553-6975

www.dultmeier.com

E1072


Lighting & Accessories

413

LED Retrofit Lamps

Hubbell Wall Lighting

Now You Can Change Out Your Old Bulbs & Use Your Existing Enclosures !

Metal Halide or LED Bulbs HUBBELL Wall Packs are ideal for lighting car wash bays, warehouses, parking garages and many other commercial or industrial applications. Ideal mounting heights from 12’ to 15’.

Now you can change out your Metal Halide or High Pressure Sodium bulbs and still use your existing enclosures. Simply bypass the ballast and wire directly to the lamp. LED Retrofit Lamps are a simple, energy saving solution for providing significant savings.

Standard Features: Diecast aluminum housings • Vandal-Resistant doors • Glass or Polycarbonate lens • Rated from 120 volts to 277 volts, 50/60 Hz • Metal Halide or LED bulb options • Photo cell control option • Dark bronze, powder-coated finish • UL 1598 listed for wet locations.

Universal burn position, Mercury-free. RoHS compliant. Will convert into most wall packs, area lighting, flood lighting, garage and general illumination. Input voltage from 100V-277V, 50/60 Hz. 5 Year Warranty. Rated from -40° to 122° F. and 50,000 hour life. Mogul base (large) or Medium base (small). Note: Must be installed in an appropriate enclosure for outdoor or wet environments). Not for heights above 20’ to 23’. Model VL1-454 Series is a 45 watt bulb that replaces up to 175 watt metal halide or HPS bulbs. Dimensions are 10.13” long and 3.66” diameter. 5400 lumens. Mogul or Medium base.

Model LP28509 is a 100 watt bulb that replaces up to 400 watt metal halide or HPS bulbs. Dimensions are 11.42” long and 4.91” diameter. 12,000 lumens. Mogul base. Base

Watts

Replaces

HB VL1-454O Mogul 45W 175W HB VL1-454E Medium 45W 175W HB VL1-544O Mogul 54W 250W HB VL1-544E Medium 54W 250W HB LP28509 Mogul 100W 400W

Net Ea.

$ 74.70 77.75 80.75 80.75 209.10

High Intensity Discharge Lamps

D

PVL150

LED fixtures also create a bright, white light in addition to providing 60% to 70% energy savings over typical wall packs. 72 Watt LED produces Lumen output equal to 175 Watt metal halide with glass front or 150 Watt metal halide in plastic front. Dimensions: 15” H x 14-7/8” W x 7” D.

HB PVL150 HB PGM150 HB PGL250H HB PGL350H HB PVL330L HB PGM330L

METAL HALIDE LAMPS

Offers improved white color and higher light output than mercury vapor.

PVL330L Watts

Metal Halide Fixture & Lamp, Poly Lens..... Metal Halide Fixture & Lamp, Glass Lens... Metal Halide Fixture & Lamp, Glass Lens... Metal Halide Fixture & Lamp, Glass Lens .. LED Fixture, Poly Lens................................ LED Fixture, Glass Lens...............................

150 150 250 350 72 72

Wt.

Net Ea.

20 lbs. $ 254.10 25 lbs. 265.20 27 lbs. 348.50 33 lbs. 320.20 13 lbs. 382.80 21 lbs. 417.20

Power Cords

D

Plug with Bare Cord Ends

Standard Mogul Base

Metal Halide: Universal operation allows lamp to be mounted in any position. Primary advantage of this style of lamp is the bright, white light that is produced. Other advantages are: high efficiency, compact size, longer life, versatility, user comfort and positive environmental impact. Average life is 10,000 to 20,000 operating hours depending on wattage. Lamps are clear in color. 175 Watt bulbs are available in (2) base styles. Avg. Life

†Std. Part No. Base Watts (Hours) Length Pkg. Net Ea. HB MH150U Mogul 150 15,000 8-5/16" 12 $ 34.95 HB MH150U-MED Medium 150 15,000 5-7/16” 12 19.75 HB MH175U Mogul 175 10,000 8-5/16” 12 12.10 HB MH175U-MED Medium 175 10,000 5-1/4" 12 15.95 HB MH250U Mogul 250 10,000 8-5/16" 12 12.10 HB MH320U Mogul 320 10,000 8-5/16” 6 13.65 HB MH400U Mogul 400 20,000 11-1/2" 6 12.10 HB MH400U-ED28 Mogul 400 20,000 8-5/16" 12 16.90 HB MH1000U Mogul 1000 12,000 15-3/8" 6 21.75 †5% Discount for Standard Package Orders

D

Part No. Gauge Wires Length Grounded Ends Net Ea. GN 1W950 14 3 8' Yes Bare $ 19.15 GN 1FD93 12 3 8' Yes Bare 37.05

Ground Fault Circuit Interrupters Standard with male plug on one end and a receptacle on the other end. UL listed and standard with Test and Reset buttons and with “Power-On” indicator lamp. Available in 15 and 20 Amp. GFI units are AC, 60 Hz and 12 or 14 gauge. Gauge Rating

DU XG2-14-2S DU XG2-14-25S DU 1051-12-25

(800) 228-9666

1FD93

1W950

Part No.

DULTMEIER SALES • OMAHA, NE

D

Part No.

Replacement Lamps for a wide variety of Lighting requirements

Smaller Medium Base

PGM330L

Metal Halide wall packs create a bright, white light and have been a standard for bay lighting for many years. Available in 150, 250 and 350 watts. Bulbs are included. Dimensions: 150 Watt is 13-1/4” H x 14-1/2” W x 7-1/8” D. 250 and 350 Watts are 15-1/8” H x 14-7/8” W x 9-7/8” D.

D

Model VL1-544 Series is a 54 watt bulb that replaces up to 250 watt metal halide or HPS bulbs. Dimensions are 10.13” long and 3.66” diameter. 6500 lumens. Mogul or Medium base.

Part No.

D D

www.dultmeier.com

14 14 12

• DAVENPORT, IA

D

For indoor or outdoor use. Length

Net Ea.

2' 25’ 25’

$ 30.25 88.85 73.70

15 Amp 15 Amp 20 Amp

(800) 553-6975

E0475


Foamers

414 ProFoam Bottle Foamer

— Adjustable Pattern —

DEMA Hand-Held Bottle Foamer dispenses foaming degreasers and sanitizers on a variety of surfaces. Ideal for use in car washes, food service areas, quick lube bays etc. Easily attaches to standard garden hose with city water pressure. Produces excellent foam quality with good distance, (10' throw at 40 psi inlet water pressure). Spray gun and quick connect fitting are standard. Bottle has 32 oz. capacity.

Adjustable Spray Pattern (horizontal or vertical) D

D

Part No. Net Ea.

DE 289 ProFoam Bottle Foamer $ 57.30

High Pressure Foamers

Foam Cannon

Adjustable Chemical Injection Knob

Foam Cannon from MTM Hydro. Designed to throw a thick foam on vehicles, houses, roofs or buildings. Adjustable spray pattern, (vertical or horizontal). Adjustable chemical knob for more or less chemical to be applied. Rated for 1000 to 5000 PSI and 1.8 to 5.3 GPM. Maximum temperature is 140° F. Tank capacity is 32 ozs. Includes quick connect and M22 inlet adapters. 20’ foam throw.

Part No.

Max. Flow

Max. PSI

MV PF22

5.3 GPM

5,000

Net Ea.

$ 60.35

Adjustable Foam Lances Model 140263 Foam lance with bottle can throw a dense chemical foam up to 20’. Adjustable design allows for user to spray varying distances with a wide or concentrated pattern. Chemical bottle has 32 oz. capacity. Rated to 5.3 GPM and 5000 PSI. Inlet port is 1/4” FPT. 1/4” QC plug and 22mm adapter are also included.

YLS12T & YL31T with tank D

D

YLS12 Foamer

These unique foamers can be attached to your discharge gun to apply foamed chemicals downstream from your high pressure pump. Rated to a maximum of 2900 PSI. Foam supply can be easily changed with the adjustment knob. Features: Rust-proof construction • Chemical resistant material • Filtered chemical bottle. YLS12 is a foamer with an injector barb inlet for hose or tubing, no tank. YLS12T & YLS31T are the same as YLS12 but with 1 quart tank. Specifications: Maximum temperature of 140° F. • Weight is approximately 1-lb. • Materials of construction are plastic, brass, stainless steel and Buna-N. • Tank is 1 quart capacity. Inlet is 1/4" FPT. Part No.

Maximum Pressure

Max GPM

Net Ea.

IP YLS12 Foamer WITHOUT Tank. IP YLS12T Foamer WITH Tank........ IP YLS31T Foamer WITH Tank.......

2900 PSI 2900 PSI 2300 PSI

6.50 6.50 5.30

$ 61.90 74.95 52.40

Model 140289 Foam lance without chemical bottle. Simply put tubing and foot valve into your chemical pail or drum. Kit includes foam lance, 30’ tubing, foot valve and (3) orifices for 3.0, 4.0 or 5.6 GPM pumps. Rated to 5.6 GPM, 5000 PSI and 140° F. Inlet is 1/4” FPT.

Inlet

140263 Foamer with Tank

Chemical Barb D

D

140289 Foamer without Tank

High Pressure Foamers

Maximum Maximum Part No. Pressure GPM

MV 140263 Foamer WITH Tank MV 140289 Foamer WITHOUT Tank

Hand Foamers from Suttner can be adjusted for vertical or horizontal spray pattern. Ideal for industry, agriculture, institutional cleaning and food processing. Includes metering valve for (5) chemical mixture settings. Easy-to-fill, wide mouth, 32 or 64 oz. tanks. Plastic and stainless construction is corrosion-resistance. Unique design cuts chemical consumption by up to 50% over other foamers on the market. Rated to 4350 PSI, 5.2 GPM and 175° F.

5000 PSI 5000 PSI

5.3 5.6

Net Ea.

$ 51.50 84.30

Hand Held Spray Foamer Compact, Hand Held, Foam Sprayer. Foams chemicals for almost any application. 2 Liter (67 oz.) capacity. Easily operated with one hand. Comfortable grip with trigger for on/off control. Pressure relief valve for added safety.Viton® seals. Natural color tank for easy visibility of product level.

D

Part No.

Maximum Maximum Pressure GPM

NP ST73 Foamer and 32 oz. Tank NP ST732 Foamer and 64 oz. Tank

4350 PSI 4350 PSI

5.2 5.2

D

Net Ea.

$ 48.45 53.50

Part No.

DE 900-2LHH Spray Foamer

Capacity

Net Ea.

67 oz.

$ 33.95

Viton® is a registered trademark of DuPont Performance Elastomers

DULTMEIER SALES • OMAHA, NE

(800) 228-9666

www.dultmeier.com

• DAVENPORT, IA

(800) 553-6975

E0506


Chemical Foam Units

415

Ideal Systems for chemical foam washdown and/or sanitation. For use in agriculture, food and beverage, vehicle cleaning and industrial applications. Available in permanent wall mount systems, portable hand carry or portable cart units. All foamers are designed to combine air pressure, water and chemical mixture to create the type of clinging foam that is required for most cleaning/sanitation situations. All systems are complete and include needle valve for foam control, discharge hose, foam wands and necessary fittings. (Inlet air and water hoses are not included).

Wall Mount Foamer Unit Model 900WC Wall Mount Foamer Unit. Includes: Air driven chemical pump • Air pressure regulator • 50’ of foam hose • Foaming nozzle • Chemical tube • Gasketed control enclosure.

D

Requires 5-10 cfm of air at 40-80 PSI. Creates up to 30 gallons of foam per minute and throws foam to a distance of 25’.

Part No.

DE 900WC

Wt.

Wall Mount Foam Unit

Model 900WC

Net Ea.

$ 717.00

31 lbs.

Hand Pump Up Foamer - 2 Gallon -

Model 900-2PU Hand Pump Up Foamer. Easy, hand carry foamer for ease-of-use and portability. Includes: 2 Gallon tank • 3-1/2’ of Hose • Trigger foam wand.

D

Simply fill the tank with chemical water solution and pump up to pressurize. Adjustable needle valve controls foam consistency. Produces approximately 1/2 gallon of foam per minute. Part No.

Wt.

DE 900-2PU Pump Up Foam Unit

6 lbs.

Model 900-2PU

Net Ea.

$ 115.50

Portable Foamer - 10 Gallon -

Model 910 Portable Foamer Unit. Wheeled cart with 10 gallon solution tank feeds the air-driven chemical pump. Includes: Air pressure regulator • 20’ of foam hose • Foam nozzle assembly • Air pump • Tank assembly.

Model 910

Requires 5-10 cfm of air at 40-80 PSI.Throws foam to a distance of 25’. Produces approximately 25 gallons of foam per minute. Part No.

DE 910

Wt.

10 Gallon Portable Foam Unit

D

Net Ea.

$ 888.00

34 lbs.

Portable Foamer

Model 925

- 25 Gallon -

Model 925 Portable Foamer Unit. Wheeled cart with 25 gallon solution tank feeds the air-driven chemical pump. Includes: Air pressure regulator • 30’ of foam hose • Foam nozzle assembly • Air pump • Tank assembly. Requires 5-10 cfm of air at 40-80 PSI. Throws foam to a distance of 25’. Produces approximately 50 gallons of foam per minute. D

Part No.

Wt.

Net Ea.

DE 925 25 Gallon Portable Foam Unit 59 lbs. $ 1004.00 DULTMEIER SALES • OMAHA, NE

(800) 228-9666

www.dultmeier.com

• DAVENPORT, IA

(800) 553-6975

E0746


All Purpose Augers

416

Tube & Auger Extensions

E-Z OFF MOTOR MOUNT

PLASTIC BELT SHIELD

No tools required to remove top channel with motor Off-site storage of motor for theft protection. Power several systems with the same motor. Meet all your motor mount requirements with one part number.

DRIVE KITS

NECO’S “All Purpose Auger “ line consists of the same basic components used in our “Modular” line. By combining the universal power discharge head and common auger extensions with specific components, this line easily meets your requirements for bin loading, or transfer systems, regardless of bin size or system type. You can easily change or add on to these systems at any time without modifications.

Discharge Head 1-1/4" shafts on 6" and 8". 1-1/2" shafts on 10" and 12".

GEAR REDUCTION DRIVE AVAILABLE ON ALL UNITS.

Auger Discharge Heads

Order motor and motor pully separately

Standard head used on all underbin unloading augers, vertical unloading augers, inclined unloading augers, roof augers, “all purpose augers, utility augers etc.

BELT HP PART NO. Net Ea. WT. 1 THRU 2 NE 047186 $ 332.80 75 2 3 - 5 NE 047187 357.60 77 6" 3 7.5 NE 047188 367.70 81 1* THRU 3 NE 048489 1253.00 112 2* 5 - 7.5 NE 048490 1273.00 114 1 THRU 2 NE 047189 341.40 83 2 3 - 5 NE 047190 366.30 85 8" 3 7.5 - 10 NE 047191 390.50 89 1* THRU 3 NE 048488 1183.00 121 2* 5 - 7.5 NE 048487 1198.00 124 1 2 NE 047192 624.00 153 2 3 - 5 NE 047193 618.00 156 3 7.5 - 10 NE 047194 681.00 159 10" 4 15 NE 047195 889.00 195 2* 5 - 7.5 NE 046000 1457.00 196 2** 10 - 15 NE 048837 2464.00 272 3** 20 NE 047196 2493.00 276 3 5 - 10 NE 047197 818.00 217 4 15 NE 047198 1030.00 231 12" 2* 5 - 7.5 NE 046001 1562.00 257 2** 10 - 15 NE 047199 2572.00 300 3** 20 NE 047200 2601.00 306 * DISCHARGE HEAD W/741 GEAR REDUCER MOUNTED ** DISCHARGE HEAD W/3051 GEAR REDUCER MOUNTED

DISCHARGE HEADS INCLUDE: • Tube Section w/Heavy Duty Auger Flight (See Chart For Lengths) • Sealed, Self-Aligning Bearing DISCH. HD. LENGTHS SIZE TUBE AUGER 6" 24" 30-1/2" 8" 24" 33" 10" 30" 43" 12" 36" 52"

• Driven Pulley and Belt • E-Z OFF Motor Mount • Belt shield

HORIZONTAL, VERTICAL FORCE 800 TO 2000TO 3500 TO 5000 TO FEED & 1100 2500 4000 5500 STEP-UP INCLINE 1100 2500 4000 5500 SAME SIZE INCLINE

600 TO 1500 TO 2700 TO 3750 TO 850 1900 3000 4200

VERTICAL 400 TO 1000 TO 1750 TO 2500 TO GRAVITY FEED 550 1250 2000 2750 *Dry Corn Rated

Box & Crating Charges on Some Items May Be Added

Tube & Auger Extensions

HORSEPOWER REQUIREMENTS: SIZE BIN DIA. HP BELTS 14' - 16' 3/4 1 6" 17' - 25' 1 1 26' - 57' 2 1 14' - 22' 2 1 23' - 34' 3 2 8" 35' - 63' 5 2 64' - 75' 7.5 3 81' - 120' 10 3 14' - 34' 5 2 35' - 57' 7.5 3 10" 58' - 80' 10 3 81' - 113' 15 4 114' - 120' 20 3 14' - 25' 5 3 26' - 37' 7.5 3 12" 38' - 57' 10 3 58' - 80 15 4 81' - 120' 20 3

with Connectors

Extensions consist of a tube, auger flight, connecting shaft and tube connecting sleeve. Standard lengths are 2', 4', 6', 8', 10', 12', 14', 16', 18' and 20'. Augers and tubes are exactly the same length. Exposed auger inlet is designed into the power discharge head. Same inventory of auger extensions meet a wide variety of applications. Same extensions for underbin augers, vertical augers, all purpose augers, incline augers and roof augers. Note: Any combination of tube and auger extension which add up to the same footage and the same number of extensions will price out the same.

Tube & Auger Extension Prices 6" STANDARD TUBE FLIGHTING - 10GA. AND AUGER PART LENGTH NO. Net Ea. WT. 2' 047017 $169.80 22 4' 047018 187.80 36 6' 047019 207.80 50 8' 019836 230.20 64 10 019837 255.60 78 12' 019838 284.50 92 14' 019839 316.80 106 16' 019840 352.70 120 18' 019841 394.50 134 20' 019842 443.30 148

8" STANDARD FLIGHTING - 10GA.

10" STANDARD FLIGHTING - 7 GA.

PART PART NO. Net Ea. WT. NO. Net Ea. WT. 047020 $209.50 31 047023 $310.70 56 047021 231.90 60 047024 347.10 80 047022 256.60 89 047025 389.80 105 019825 284.60 118 019843 438.10 133 019826 316.00 147 019844 494.30 162 019827 352.50 176 019845 560.00 200 019828 395.00 205 019846 637.00 224 019829 440.40 234 019847 723.00 249 019830 493.90 263 019848 826.00 277 019831 561.00 292 019849 945.00 304

DULTMEIER SALES • OMAHA, NE

Roof Auger Hopper Galvanized roof auger hopper with internal bearings and protective grate.

6" - 048977 8" - 048978

10" - 048979 12" - 048980

Order 1/8" cable separately

CAPACITIES * DISCHARGE 6" 8" 10" 12" TYPE 440 RPM 440 RPM 320 RPM 270 RPM

Heavy duty flighting is available on 6", 8" and 10". Heavy duty flighting is standard on 12".

All Purpose Auger Accessories: 6" UNITS Ref. Description

Part No. Net Ea. Wt.

8" UNITS

Part No. Net Ea.

10" UNITS

Wt. Part No. Net Ea.

Wt.

A

Covered Slide-Gate Inlet with Rollers Removable Sweep Pivot for Above

NE 023414 $307.10 50 NE 023414 $307.10 50 NE 023414 $307.10 50 NE 023233 181.80 5 NE 023233 181.80 5 NE 023233 181.80 5

B

Tube Adaptor (for adapting to above tube)

NE 023205 12.85 17 NE 023206 90.30 19 NE 023207 108.10 21

C

Center Hoppers (for Concrete)

NE 047371 246.00 55 NE 047376 249.50 55 NE 046039 333.30 80

D

Intermediate Hoppers (for Concrete)

NE 047374 117.20 21 NE 047379 119.70 22 NE 046028 169.20 29

E

Adjustable Support Bracket

NE 021032 158.30 33 NE 021035 169.70 34 NE 021036 174.80 35 NE 022680 143.50 22 NE 022681 141.40 23 NE 022682 145.50 24

F

Support Leg with Clamp (10" Leg)

G

Adjustable Bin Bracket

NE 014527 101.00 22 NE 014528 96.00 23 NE 014529 107.60 25

H

Nylatron Peripheral Bearing

NE 035234 47.75 2 NE 035235 65.40 2 NE 035236 65.55 3

I

2' Double-Lead Flighting Intake Section

NE 022948 132.90 11 NE 022949

J

Horizontal Intake Boot w/ Idler Bearing

NE 022318 185.40 32 NE 022323 181.30 36 NE 022328 290.90 44

K

Hopper for Horizontal Auger w/o Cover Optional Bearing Kit for above

NE 022197 244.50 21 NE 022204 338.40 29 NE 022211 324.30 39 NE 022506 44.90 2 NE 022506 44.90 2 NE 022505 74.10 2

L

Hopper for Inclined Auger Optional Bearing Kit for above

NE 022171 339.40 39 NE 022177 240.40 42 NE 022180 305.60 50 NE 018140 119.70 2 NE 018140 119.70 3 N/A N/A N/A

M

Square Outlet with Clamp Band

NE 024236 54.15 7 NE 024234 56.45 9 NE 024235 54.75 15

N

90 Degree Discharge Spout 35 Degree Discharge Spout

NE 021019 32.10 8 NE 021022 36.45 11 NE 021025 29.70 20 NE 018907 57.15 7 NE 018909 57.60 10 NE 018911 58.30 19

O

Roof Auger Hopper

NE 048977 265.70 46 NE 048978 257.60 54 NE 048979 360.10 69

P

Flow-Thru Intake Hopper

NE 021243 235.40 32 NE 021244 317.20 50 NE 021245 534.00 80

126.30 13 NE 022950 176.80 19

Q

Intake Cage and Bearing Assembly

NE 022362 332.80 15 NE 022366 372.00 22 NE 022369 578.00 35

R

2 Pc. Adjustable Elbow 7 Ga. Steel

NE 035507 304.20 15 NE 035519 292.90 19 NE 035508 379.30 40

S

Vertical Force Feed Intake Boot As Above, except next size larger Vertical

NE 022338 658.00 37 NE 022343 666.00 53 NE 022305 805.00 69 NE 022781 403.50 65 NE 022782 782.00 83 N/A N/A N/A

T

FLANGE RING CONNECTOR "SWIVEL TYPE" FLANGE RING CONNECTOR "QUICK CLAMP"

NE 035379 13.55 1 NE 035382 15.70 1 NE 035384 17.80 2 NE 036789 CALL 1 NE 036790 69.55 2 NE 036791 27.40 3

U

SQUARE FLANGE RING

NE 035163 42.00 2 NE 035164 44.80 2 NE 035165 8.54 3

V

ROUND FLANGE RING

NE 035178 8.54 2 NE 035230 8.59 2 NE 035180 9.96 3

W

TWO-WAY VALVE "X" TYPE

NE 034502 812.00 19 NE 034516 715.00 29 NE 034524 889.00 41

X

TWO-WAY VALVE "Y" TYPE

NE 034533 860.00 23 NE 034541 596.00 39 NE 034549 1435.00 60

Y

THREE-WAY VALVE

NE 034558 1323.00 35

Z

CLAMPING BANDS (Half) CLAMPING BANDS (Bag of Hardware)

NE 035003 2.85 1 NE 035004 4.29 2 NE 035005 4.21 2 NE 036616 2.85 3 NE 036616 2.85 4 NE 036616 2.85

NE 034567 1409.00

65

N/A

N/A

N/A

AA MOUNTING BRACKET

NE 036620 25.70 4 NE 036621 36.35 5 NE 036622 31.65 6

AB ADJUSTABLE SUPPORT STAND

NE 048493 554.00 27 NE 048494 538.00 28

AC 45 DEGREE ELBOW

NE 024168 188.90 8 NE 024170 84.30 12 NE 024172 184.40 17

AD DOWNSPOUT TUBE

Call for Pricing Call for Pricing Call for Pricing

AE FLEXIBLE SPOUTING GALVANIZED AF STAR TRUSSING KITS

Call for Pricing One Star Two Star Three Star Five Star

NE 027228 402.50 83 NE 027230 584.00 139 NE 027231 1025.00 189 NE 027241 2348.00 239

N/A

N/A

N/A

Call for Pricing Call for Pricing NE 028001 637.00 NE 028003 1320.00 NE 028005 2465.00 NE 028007 5099.00

84 NE 029436 1273.00 100 143 NE 028010 2055.00 175 194 NE 028593 3906.00 244 NE 029416 7850.00

AG CONNECTOR SLEEVE w/ Hardware (A Type) NE 036327 27.15 5 NE 036328 30.00 CONNECTOR SLEEVE w/ Hardware (AHB Type) NE 024045 46.90 10 NE 024048 45.70

7 NE 036329 46.45 18 13 N/A N/A N/A

AH SQUARE TO ROUND TRANSITION (7 Ga. Steel) NE 035455 132.90 7

12 NE 035461 202.00 18

(800) 228-9666

www.dultmeier.com

• DAVENPORT, IA

NE 035458 226.30

(800) 553-6975

E0508


Series "A" Auger Accessories COVERED SLIDE-GATE INLET WITH ROLLERS

A

No. 023414 SLIDE GATE INLET (will fit 6", 8" or 10" augers)

B

Optional Rollers

Bolt-On Concrete Form 8" HD, 10" & 12" center hoppers have covered roller gate inlets for plenums or concrete. See price list for part numbers.

D

Flange is removable.

(with protective grate) 6" 8" 10" Width 20" 22" 281/2" * Length 161/4" 20" 20" Height 13" 16" 21" * Hopper only 6" - 022197 8" - 022204 10" - 022211

galvanized

Galvanized with protective grate.

ADJUSTABLE SUPPORT BRACKET FOR AUGERS AND DOWN SPOUTING (4 LEGS)

6" - 022171 8" - 022177 10" - 022180

6" - 024236 8" - 024234 10" - 024235 12" - 024237

6" - 021032 8" - 021035 10" - 021036 12" - 021384

SUPPORT LEG WITH CLAMP (1 leg only)

Adjustable up to 10'

6" & 8" 10" Width 45" 48" Length 28" 311/2" Height 20" 23"

SQUARE OUTLET

M

NO CUTTING OR WELDING REQUIRED

EACH LEG ADJUSTABLE FROM 2'-0" TO 5'-6"

N

DISCHARGE SPOUTS

(Flexible spouting can be attached to either type) For 90˚ 35˚ For horizontal inclined augers augers

6" - 022680 8" - 022681 10" - 022682

G

ADJUSTABLE BIN BRACKET (2 legs) Adj. from 6" to 2'-6"

6" - 021019 8" - 021022 10" - 021025 12" - 021028

O

NYLATRON PERIPHERAL BEARING (with attaching bolts)

I

ROOF AUGER HOPPER

6" - 048977 10" - 048979 8" - 048978 12" - 048980

6" - 035234 8" - 035235 10" - 035236

2" DOUBLE-LEAD FLIGHTING INTAKE AUGER SECTION Substitute for 2' of Extension Auger (8" STD + 2' Double = 10')

FLOW THRU INTAKE HOPPER

NOTE: 6" has a 8" sq. outlet 8" has a 10" sq. outlet 10" has a 14" sq. outlet

Drive can be on intake boot or on upper discharge head. Vertical auger can be stepped up one size, i.e. 6" horizontal to 8" vertical or 8" horiz. to 10" vert. (Horiz. and vert. auger use the same size pulleys). Provides much higher capacities than gravityfed verticals. Horizontal auger uses a 3.2" motor pulley and vertical auger uses a 4.5" motor pully when horiz. and vert. auger are the same size diameter. Swivel Assembly - Vertical can rotate left to right and incline 90˚ to 25˚.

J

HORIZONTAL INTAKE BOOT WITH IDLER BEARING AND SHAFT

6" - 022318 8" - 022323 10" - 022328 12" - 022333

(Drive from either end)

U

THREE-WAY VALVE

6" 8" A 14" 20"

Z

V

SQUARE FLANGE RING

ROUND FLANGE RING 6" - 035178 8" - 035230 10" - 035180 12" - 035181

2-PC. ADJUSTABLE ELBOW 6" - 035507 10" - 035508 8" - 035519 12" - 035509

DULTMEIER SALES • OMAHA, NE

A

6" - 034558 8" - 034567

CLAMPING BANDS

Pair HALF w/HDWR 6" 035003 036617 8" 035004 036618 10" 035005 036619 12" 035006

Use only to discharge from round into square. 6" - 035163 8" - 035164 10" - 035165 12" - 035166

W

TWO-WAY VALVE (type "X")

6" - 034502 8" - 034516 10" - 034524

(800) 228-9666

6" - 024168 8" - 024170 10" - 024172

45˚

6" 8" 10" A 91/2" 9" 81/2"

DOWNSPOUT TUBE

AD Available in 20' lengths.

6" 8" 10" 12" 14ga. Galv. 14ga. Galv. 12ga. Galv. 3/16"HR 11ga. HR 12ga. HR 3/16" HR 3/16" HR 3/16" HR

AA

INTAKE CAGE & BEARING ASSEMBLY

6" 8" 10" A 10-1/2" 13-1/2" 13-1/2"

Y

FLANGE RING SWIVEL CONNECTORS

Outlet

6" - 022362 8" - 022366 10" - 022369 12" - 022373

R

45˚ ELBOW

AC

galvanized

AE

FLEXIBLE SPOUTING (galvanized)

6" 8" 10" 5' w/Square Flange Ring 022615 022624 022620 5' w/o Square Flange Ring 035175 035176 035177 10' w/o Square Flange Ring 036432 036433 036454

AF

STAR-TRUSSING KITS (less cable) 3/8" cable required

For connecting two round steel flange rings.

(with idler shaft and bearing) 6" - 022948 10" - 022950 8" - 022949 12" - 022951

TWO-WAY VALVE TYPE "Y"

6" - 034533 8" - 034541 10" - 034549

6" - 035379 8" - 035382 10" - 035384 12" - 035385

6"- 021243 • 8"- 021244 • 10"- 021245

Q

X

6" - 022338 8" - 022343 10" - 022305

T P

USE AT 10' INTERVALS

VERTICAL FORCE FEED INTAKE BOOT

S

6" - 018907 8" - 018909 10" - 018911 12" - 047518

1/8" Cable Sold Separately

Helpful where part of auger will run without grain. Prevents steel to steel wear. Ideal for use in multiple inlet under-bin installations.

To be attached with small bolts by customer.

galvanized

Galvanized, with internal bearings and protective grate.

6" - 014527 8" - 014528 10" - 014529

H

Circled letters refer to the component parts shown below and priced on adjacent page.

HOPPER FOR INCLINED AUGER

L

8" HD, 10" & 12" inter mediate hoppers have covered roller gate inlets for plenums or concrete. See price list for part numbers.

F

HOPPER FOR HORIZONTAL AUGER

K

INTERMEDIATE HOPPERS

Bolt-On Concrete Form

E

For • Horizontal • Inclined • Vertical

SLIDE-GATE INLET IS MOUNTED IN CONCRETE ABOVE AUGER BUT IS NOT ATTACHED TO THE TUBE. Control rods furnished by customer.

Optional Tube Adapter 6" - 023205 8" - 023206 10" - 023207 12" - 023217

CENTER HOPPERS

C

Select the system to do the job!

Five different control rod positions allow use of five slide-gate inlets parallel along tube with 1/2" pipe control rods positioned side by side.

No. 023233 Optional removable center pivot for Sweep Auger

417

MOUNTING BRACKET 6" - 036620 8" - 036621 10" - 036622

AB

ADJUSTABLE SUPPORT STAND FOR INCLINED AUGER

HEIGHT ADJUSTMENT (from base to centerline of auger tube) MIN. MAX. 6" 4'71/2" 8'41/2" 8" 4'91/2" 8'61/2" 6" - 048493 8" - 048494

www.dultmeier.com

• DAVENPORT, IA

1, 2, 3 and 5 stars available (see price list)

AG

CONNECTOR SLEEVE (with fasteners)

"A" TYPE 6" x 15" - 036327 8" x 15" - 036328 10" x 21" - 036329 "AHB" TYPE 6" x 24" - 024045 8" x 24" - 024048

galvanized

AH

SQUARE TO ROUND TRANSITION

Must be used when discharging from square to round. 6" - 035455 8" - 035458 10" - 035461 12" - 035396

(800) 553-6975

A 6" 8" 10" 12" A 7" 9" 111/2" 12"

E0509


418

6" & 8" Grain Bin Unloading Equipment Call for Details & Pricing on 10" & 12" Components

1

6" and 8" Center Hopper: under perforated floor, slide rail or roller rail

3

4

6" and 8" Intermediate Hopper: Under perforated floor, slide rail.

8", 10", and 12" Heavy-Duty Intermediate Hopper: Under perforated floor or cast in concrete, rollers only.

6

6" and 8" Center Hopper: Cast in concrete, slide rail or roller rail.

Unloading Tubes Only G a l v a n i z e d Tu b e s Include Connecting Sleeve and Hardware. Each size is available in lengths to match exactly the length of the Extension Augers shown below.

6" AND 8" Intermediate Hopper: Cast in concrete, slide rail.

Optional roller set

2

5

8", 10", and 12" Heavy Duty Center Hopper: Under perforated floor or cast in concrete, rollers only.

NOTE: Also available are 10" - 12 gauge & 12" - 12 gauge.

Extension Auger Only Shown with concrete form in place.

Each complete hopper consists of a hopper body, a box of parts (including tube size adapter, wall plate, control rod guides, and control rod handles), and concrete forms for hoppers cast in concrete. All styles and variations are illustrated above. Dimensions for 6" and 8" hoppers are the same and dimensions for heavy duty 8" and 10" hoppers are the same.

With 10 Gage Flighting.

Bolt-On concrete form.

Includes connecting shaft and hardware. Each size is available in lengths to match exactly the length Ref. of Underbin Tubes shown No. Part No. Description Net Ea. above. 1 NE 047370 6" Center Hopper............................................ $ 188.90 1 NE 047372 6" Center Hopper with Rollers......................... 239.00 Tubes & Auger connect to any 2 NE 047371 6" Center Hopper, Concrete............................ 246.00 discharge head at right.

Hoppers

2 NE 047373 6" Center Hopper Concrete with Rollers......... 1 NE 047375 8" Center Hopper............................................ 1 NE 047377 8" Center Hopper with Rollers......................... 2 NE 047376 8" Center Hopper, Concrete............................ 2 NE 047378 8" Center Hopper, Concrete with Rollers........ 6 NE 047380 8" Heavy Duty Center Hopper with Rollers .... 3 NE 019312 6" Intermediate Hopper................................... 4 NE 047374 6" Intermediate Hopper, Concrete................... 3 NE 019313 8" Intermediate Hopper................................... 4 NE 047379 8" Intermediate Hopper, Concrete................... 5 NE 047381 *8" Heavy Duty Intermediate hpr. with Rollers * Can be used under perforated floors or cast in concrete.

296.00 182.80 234.90 249.50 300.00 744.00 59.60 117.20 55.70 119.70 395.50

Auger Connecting Size Shaft Dia. 6" & 8" 11/4" 10" & 12" 11/2"

6" TUBES 16 GA. 8" TUBES 14 GA.

ube Part Part T Length No. Net Ea. Wt. No. Net Ea. Wt. 2' 048579 $ 76.45 14 048589 $ 98.85 20 4' 048580 84.65 22 048590 111.80 33 6' 048581 93.90 30 048591 125.80 46 8' 048582 105.40 38 048592 142.20 59 10' 048583 118.20 46 048593 161.50 72 12' 048584 133.00 55 048594 184.20 85 14' 048585 150.20 63 048595 210.40 98 16' 048586 169.80 71 048596 241.80 111 18' 048587 193.40 80 048597 277.90 124 20' 048588 220.70 88 048598 320.60 137

6" Std. Auger

Additional Extensions available are: 6" H.D., 8" H.D., 10" Std., 10" H.D. & 12' H.D.

Tube Caps & Wall Plates As Replacements or Extras

Center Hopper Control Rods All systems are designed to use 1/2" schedule 40 pipe sections to control both center and intermediate hopper slide gates. All rods are pre-drilled, threaded and include couplings. Note: Two rod handles are included with each center hopper parts box (one for an intermediate hopper)

Bin Diameter Perforated Cast in Part No. Floor Concrete NE 047863 14-16' 14-15' NE 047864 17-20' 16-19' NE 047865 21-24' 20-23' NE 047866 25-28' 24-27' NE 047867 29-32' 28-31' NE 047868 33-36' 32-35' NE 047869 37-40' 36-39' NE 047870 41-44' 40-43' NE 047871 45-48' 44-47' *Other Lengths Available.

Description Net Ea. 6" Tube Cap $ 16.40 8" Tube Cap 22.65 6" Wall Plate 7.10 8" Wall Plate 10.10

Standard Duty Sweep Augers Wt. Net Ea. 7 lbs. $ 54.05 8 lbs. 58.35 10 lbs. 75.40 12 lbs. 69.70 14 lbs. 90.30 16 lbs. 93.90 17 lbs. 108.10 19 lbs. 125.80 21 lbs. 129.30

Designed to replace the rubber wheel on the end of a sweep auger. Instead of the spinning wheel providing the power to propel the sweep around the bin, the Sweep Walker walks the sweep around the bin. A normal sweep wheel is designed to spin against the bin floor providing a non positive forward motion to the sweep. The spinning wheel causes the sweep to feed itself into the grain pile. T h e S w e e p Wa l k e r incorporates a set of specially designed cams which move steel feet in an oscillating motion. This action allows the sweep to literally walk Description Net Ea. around the bin. This 6" & 8" Standard Sweeps............ $ 309.10 special action eliminates 6" & 8" Commercial Sweeps....... 190.90 the violent spinning and 10" & 12" Sweeps....................... 237.90 slipping motion which is 6" & 8" Standard Integral 30'-48’. 319.20 normal with rubber wheel 8" Industrial Integral.................... 317.70 drives. Will last many times 10" Industrial Integral.................. 237.90 longer than rubber wheels DB300 & DB8300 14'-28’............ 309.10 and is far less damaging to DB300 & DB300 30'-48’.............. 317.70 drying floors. DULTMEIER SALES • OMAHA, NE

Part No. NE 035402 NE 035403 NE 048932 NE 048933

Standard Duty Sweep Augers are available in 6" and 8". They are designed to provide customers with a sweep that is lightweight and fairly easy to carry into the grain bin. Standard duty sweep augers use a basic unit along with an extension(s) Order motor and to provide a complete sweep for 3.2" motor pulley separately. any size bin.

Sweep Walker

Part No. NE 014337 NE 014338 NE 014344 NE 014340 NE 014329 NE 014344 NE 014337 NE 014329

8" Std. Auger

Auger Part Part Length No. Net Ea. Wt. No. Net Ea. Wt. 2' 022243 $ 93.90 7 022261 $ 149.70 8 4' 022244 103.20 14 022262 164.00 16 6' 022245 113.70 21 022263 178.60 25 8' 022246 125.00 28 022264 201.00 32 10' 022247 137.90 36 022265 215.20 40 12' 022875 151.50 43 022879 222.60 48 14' 022876 166.70 50 022880 237.30 56 16' 022877 185.20 57 022881 252.50 65 18' 022878 201.00 64 022882 267.60 72 20' 022248 221.00 72 022266 280.30 80

(800) 228-9666

6" STANDARD SWEEP 8" STANDARD SWEEP 4" Flighting to match capacity of 6" Unloading Auger 5-1/4" Flighting to match capacity of 8" Unloading Auger Bin. Part Part Dia. H.P. Belt Number Net Ea. Wt. H.P. Belt Number Net Ea. Wt. 18' 1/2 1 048888 $366.30 50 1 1 048895 $359.10 56 21' 1/2 1 048889 471.70 55 1 1 048896 483.80 62 21'8" - 22' 1/2 1 048920 656.00 58 1 1 048926 622.00 66 24' 3/4 1 048890 490.00 60 1-1/2 1 048897 502.00 68 24'8" - 25' 3/4 1 048921 877.00 63 1-1/2 1 048927 807.00 72 27' 3/4 1 048891 500.00 65 1-1/2 1 048898 507.00 74 27'8" - 28' 3/4 1 048922 839.00 68 1-1/2 1 048928 728.00 78 30' 3/4 1 048892 536.00 70 2 1 048899 541.00 80 30'8" - 31' 1 1 048923 885.00 73 2 1 048929 810.00 84 33' 1 1 048893 534.00 75 2 1 048900 550.00 86 33'8" - 34' 1 1 048924 879.00 78 2 1 048930 833.00 90 36' 1-1/2 1 048894 542.00 80 3 1 048901 554.00 93 36'8" - 37' 1-1/2 1 048925 1060.00 83 3 1 048931 1039.00 97

Standard sweep augers use the Z-Bar motor mount. E-Z OFF Motor Mount is optional (a quick and easy way to remove motor during sweep installation and removal).

E-Z OFF Motor Mount

NE 047800

$ 68.25

OPTIONAL FLOW CONTROL SWITCH (Automatically stops sweep auger motor when too much grain is brought into the center hopper). 1 Phase Flow Control Switch 3 Phase Flow Control Switch Stilt to raise sweep pivot 12" Stilt to raise sweep pivot 4"

www.dultmeier.com

NE 018719 CALL NE 019365 $ 151.50 NE 018486 92.45 NE 018524 14.95

• DAVENPORT, IA

(800) 553-6975

For optional sweep walker in place of rubber wheel drive, Call for Pricing.

E0510


U-Trough Augers

419

SAFETY COVER

ACCESSORIES

U-TROUGH AUGER OPTIONS SHOWN ON ADJACENT PAGE INTAKE SECTION

INTERMEDIATE SECTION (W/HANGER BEARING) DISCHARGE SECTION (W/HANGER BEARING) SIZE A B C D E F

6" 8"

1-3/4" 1-3/4"

6" 8"

5/8" 5/8"

7-1/2" 9-3/4" 14 GA. 10-1/2" 12-3/4" 14 GA.

10" 1-3/4" 10" 5/8" 13" 15-1/4" 12 GA. 13" 2" 13" 1" 16" 18-1/4" 12 GA. 17" 2-1/4" 17" 1" 19-1/2" 23" 11 GA.

SAFETY BELT SHIELD

SQUARE DISCHARGE OUTLET

HANGER BEARINGS...Split wooden bearings that are permanently lubricated and are mounted with split bearing holders for EASY replacement without disassembling the auger or U-Trough. END BEARING PLATES...have permanently lubricated precision bearings, and can be switched to drive U-Trough from either end. Note: ALL DRIVE END PLATES ARE PREASSEMBLED AT FACTORY AND MOUNTED ON DISCHARGE END. MOTOR MOUNTS...Easy to adjust, can be mounted on top, bottom, or either side of U-Trough. Note: Bottom mount is for INTAKE END DRIVE ONLY. OIL ENCLOSED SPEED REDUCER...Quiet operation with long wear. DRIVE KIT...with pulleys and necessary belts, to give 200 R.P.M. INTERMEDIATE SECTIONS...come in 2', 4', 6', 8', and 10' lengths-each with a hanger bearing. SQUARE DISCHARGE...accommodates accessories on back page.

BASIC UNITS

Prices at the right Include: Discharge Section, Intermediate Section(s), and Intake Sections, Cover, Bolts, Motor Mount, Oil Enclosed Speed Reducer, Motor Pulley, Driven Pulley, Belts and Belt Shield. MOTOR NOT INCLUDED

FOR HEAVY-DUTY FLIGHTING Specify and ADD Per FOOT: Size

PRICE EA.

6" 8" 10" 13"

CALL for Pricing |

Box & Crating Charges on Some Items May Be Added

DULTMEIER SALES • OMAHA, NE

AUGER FLIGHTING TROUGH OUTSIDE STANDARD HEAVY-DUTY SIZE DIAMETER THICKNESS THICKNESS

6" 8" 10" 13"

5-1/4" 7" 9" 12"

10 GA. 10 GA. 3/16" 3/16"

1/4" 1/4" 3/8" 3/8"

When auger flighting is manufactured, strip steel is cold rolled into the helicoid shape. In this process, thickness of the outer edge (A) is reduced by about one/half. Thicknesses shown above are the inside edge (B).

H.P. Requirements HP AND CAPACITY RATINGS FOR DRY CORN. FOR HIGH MOISTURE CORN USE NEXT HIGHER HP RATING.

FOR INCLINES OVER 15˚, USE NEXT LARGER SIZE U-TROUGH.

10' 20' 30' 40' 50' 60' 70' 80' 90' 100' 110' 120' 130' 140' 150' SIZE RPM CAPACITY THRU THRU THRU THRU THRU THRU THRU THRU THRU THRU THRU THRU THRU THRU THRU 18' 28' 38' 48' 58' 68' 78' 88' 98' 108' 118' 128' 138' 148' 158' 6" 250 400-500 BPH 1 1.5 2 3 3 3 3 3 5 5 5 5 5 5 5 8" 200 1200-1500 BPH 2 2 3 3 5 5 5 5 7.5 7.5 7.5 10 10 10 10 10" 200 3000-3500 BPH 3 3 5 5 7.5 7.5 7.5 10 10 15 15 20 20 20 20 13" 200 6000-6500 BPH 5 7.5 10 10 15 15 20 20 25 25 25 30 30 40 40

NOTE: U-Trough Augers (also 17" U-Trough) are available in lengths up to 150'. Call for Pricing.

400 - 500 BPH 6" Square Discharge

LENGTH

LIST PRICES

6" 8" 10" 13"

Prevents overcarry and jamming

AUGER SHAFTS...are double bolted and are reinforced on each for maximum strength and wear. PREASSEMBLED SECTIONS and MOTOR MOUNTS for easier installation and low cost. U-TROUGH...HIGH QUALITY construction including "JIG-WELDED" freestanding flange rings. EXTRA HIGH U-TROUGH...with wide top flange.

REVERSE AUGER AND FLIPPERS AT END OF DISCHARGE...

SPLIT WOODEN BEARINGS ARE HELD TOGETHER WITH SPLIT BEARING HOLDER. NO LUBRICATION REQUIRED, BEARINGS CAN BE REPLACED WITHOUT DISASSEMBLY OF AUGER OR SHAFTS

HP

Price Ea. Wt.

10' 1 12' 1 14' 1 16' 1 18' 1 20' 1-1/2 22' 1-1/2 24' 1-1/2 26' 1-1/2 28' 1-1/2 30' 2 32' 2 34' 2 36' 2 38' 2 40' 3 42' 3 44' 3 46' 3 48' 3 50' 3 52' 3 54' 3 56' 3 58' 3 60' 3 62' 3 64' 3 66' 3 68' 3 70' 3 72' 3 74' 3 76' 3 78' 3 80' 3 82' 3 84' 3 86' 3 88' 3 90' 5

(800) 228-9666

C A L L

F O R P R I C I N G

1200 - 1500 BPH 3000 - 3500 BPH 6000 - 6500 BPH 8" Square Discharge 10" Square Discharge 12" Square Discharge HP Price Ea. Wt.

214 2 311 2 333 2 355 2 388 2 405 2 448 2 471 2 493 2 505 2 539 3 582 3 604 3 627 3 650 3 674 3 717 3 739 3 761 3 784 3 807 5 850 5 873 5 895 5 918 5 941 5 984 5 1006 5 1029 5 1051 5 1075 5 1117 5 1140 5 1162 5 1185 5 1209 5 1252 5 1275 5 1297 5 1319 5 1349 7-1/2

www.dultmeier.com

C A L L

F O R P R I C I N G

HP Price Ea. Wt.

255 3 375 3 406 3 437 3 469 3 501 3 561 3 591 3 623 3 654 3 686 5 745 5 776 5 807 5 839 5 871 5 930 5 960 5 992 5 1023 5 1061 7-1/2 1120 7-1/2 1151 7-1/2 1183 7-1/2 1213 7-1/2 1245 7-1/2 1304 7-1/2 1335 7-1/2 1366 7-1/2 1397 7-1/2 1429 7-1/2 1487 7-1/2 1518 7-1/2 1549 7-1/2 1581 7-1/2 1612 10 1671 10 1702 10 1734 10 1764 10 1796 10

• DAVENPORT, IA

C A L L

F O R P R I C I N G

HP Price Ea. Wt.

320 5 428 451 5 626 500 5 648 559 5 738 614 5 794 665 7-1/2 860 733 7-1/2 974 787 7-1/2 1034 841 7-1/2 1090 895 7-1/2 1146 951 10 1270 1018 10 1394 1074 10 1410 1128 10 1500 1182 10 1556 1233 10 1613 1301 10 1730 1355 10 1787 1408 10 1843 1463 10 1899 1513 15 1960 1582 15 2077 1636 15 2133 1690 15 2189 1744 15 2246 1794 15 2302 1862 15 2419 1916 15 2476 1970 15 2532 2016 15 2588 2074 20 2643 2143 20 2761 2197 20 2817 2251 20 2873 2305 20 2929 2422 20 2985 2491 20 3103 2548 20 3159 2599 20 3216 2654 20 3238 2704 25 3624

(800) 553-6975

C A L L

F O R P R I C I N G

E0512


U-Trough & Auger Accessories

420 Two-Way Valve (X-TYPE)

Covered Roller Gate Inlet

45˚ Elbow

Five control rod positions allow the use of five different inlets along the U-Trough (parallel). Inlet does not attach to U-Trough. Control rods to be furnished by customer, 1/2" pipe for ARB2 and 3/4" pipe for A16R16.

2-3/8" ON AR82 2" ON A16R16

OPTIONAL REMOVABLE CENTER PIVOT FOR SWEEPS. R17 FOR AR82-16R17 FOR A16R16.

No. 023414INLET WITH 10" SQ. OPENING FOR 6", 8" AND 10" U-TROUGH.

DIA. A

REMOVABLE FLANGE

(Y-TYPE)

NO. 023221 INLET 16" SQUARE OPENING FOR 13" U-TROUGH. REMOVABLE COVER IS STANDARD. NOTE: 023221 CAN BE USED ONLY AS A CENTER INLET WHEN USED IN A BIN. USE AR82 INLET FOR INTERMEDIATES.

Three-Way Valve A

B

WITH HINGED COVER

6" 8" 10" 13"

Flange Ring Swivel Connectors

(3 PC. AVAILABLE)

0˚ 45˚ 0˚ 6": NO. 035507 8": 035519 10": NO. 035508 13": NO. 035509

6": 8": 10": 13":

ROPE CONTROLLED VERSION AVAILABLE

6": NO. 035455 8": 035458 10": NO. 035461 13": NO. 036431

Net Ea.

WT.

Part No.

8"

Net Ea.

WT.

Part No.

Net Ea.

(800) 228-9666

www.dultmeier.com

NO. 035379 NO. 035382 NO. 035384 NO. 035385

Flexible Tubing

6" 8" 10" 13" A 151/2" 143/4" 171/2" 161/4" B 24" 24" 30" 32"

10"

6" 8" 10" 12"

024221 6" SQ OUTLET 024222 8" SQ. OUTLET 024232 10" SQ. OUTLET 024085 12" SQ. OUTLET

WT.

Covered Slide-gate Inlet with Rollers (10" sq. opening) NE 023414 $ 307.10 50 NE 023414 $ 307.10 50 NE 023414 $ 307.10 50 Covered Slide-gate Inlet with Rollers (16" sq. opening) Removable Center Pivot NE 023233 181.80 5 NE 023233 181.80 5 NE 023233 181.80 5 Intake Hopper, Galvanized NE 023317 326.80 40 NE 023318 305.60 45 NE 023319 334.90 50 Square to Round Transition, 7 Ga. NE 035455 132.90 7 NE 035458 226.30 12 NE 035461 202.00 18 2-Pc. Adjustable Elbow, 7 Ga. NE 035507 304.20 15 NE 035519 292.90 19 NE 035508 379.30 40 Flange Ring Connector NE 035379 13.55 1 NE 035382 15.70 1 NE 035384 17.80 2 Square Flange Ring NE 035163 42.00 2 NE 035164 44.80 2 NE 035165 8.54 3 Round Flange Ring NE 035178 8.54 2 NE 035230 8.59 2 NE 035180 9.96 3 45 Degree Elbow NE 024168 188.90 8 NE 024170 84.30 13 NE 024172 184.40 17 Flexible Spouting: Flange Ring Adapter NE 035215 99.45 6 NE 035216 70.55 8 NE 035217 64.85 10 5' w/o Square Flange Ring NE 035175 76.20 10 NE 035176 91.45 15 NE 035177 158.10 22 10' w/o Square Flange Ring NE 036432 120.20 20 NE 036433 156.10 31 NE 036454 313.10 46 Slide-gate Outlet with Channels NE 024221 237.90 46 NE 024222 244.50 50 NE 024232 278.30 62 Rope Controlled Slide-gate Outlet with Channels NE 024223 396.00 60 NE 024224 478.30 68 NE 024110 467.70 80 Mounting Channels - same as on Slide Gate Outlet NE 023242 6.32 3 NE 023243 2.11 4 NE 023244 2.11 4 2-Way Valve ("X" Type) NE 034502 812.00 19 NE 034516 715.00 29 NE 034524 889.00 41 2-Way Valve ("Y" Type) NE 034533 860.00 23 NE 034541 596.00 39 NE 034549 1435.00 60 3-Way Valve NE 034558 1323.00 35 NE 034567 1409.00 65 NE 034250 N/A Trussing Kit: Single Truss, Max. Span of 30' (Cable Not Included) NE 023561 387.90 NE 023615 286.40 NE 023556 494.90 Adjustable Support Stand NE 023562 187.40 36 NE 023589 160.10 37 NE 023557 166.70 38 Quick Clamp Flange Ring Connector NE 036789 CALL 1 NE 036790 69.55 2 NE 036791 27.40 3 DULTMEIER SALES • OMAHA, NE

FOR CONNECTING TWO ROUND STEEL FLANGE RINGS

Slide-Gate Outlet

DIA. 6" 8" 10" 13" A 6" 8" 10" 13"

6"

NO. 035163 NO. 035164 NO. 035165 NO. 035166

2-PC. Adjustable Elbow

Square to Round Transition

Part No.

I.D. I.D. I.D. I.D.

(TO BE WELDED TO DOWNSPOUT TUBE)

MUST BE USED WHEN DISCHARGING FROM SQUARE TO ROUND

DESCRIPTION

6" 8" 10" 12"

6" O.D. 8" O.D. 10" O.D. 12" O.D. 14 GA. 12 GA. 3/16" 3/16 GALV. UNPAINTED UNPAINTED UNPAINTED

NO. 023317 NO. 023318 NO. 023319 NO. 023320

6" 8" 10" 13" A 24" 24" 30" 30" B 22" 24" 30" 33"

NO. 035178 NO. 035179 NO. 035180 NO. 035181

Square Flange Ring

AVAILABLE IN 20' LENGTHS

Intake Hopper

I.D. I.D. I.D. I.D.

(TO BE WELDED TO DOWNSPOUT TUBE)

USED ONLY WHEN DISCHARGING ROUND INTO SQUARE

6": 023562 8": 023589 10": 023557

6" 8" 10" A 121/2" 161/2" 20" No. 034533 034541 034549

6" O.D. 8" O.D. 10" O.D. 91/2" 9" 81/2"

6" 8" 10" 12"

Downspout Tube

Adjustable Support Stand

6" 8" 10" A 14" 20" 21" No. 034558 034567 034403

NO. 024168 NO. 024170 NO. 024172 NO. 024174

FOR CONNECTING DOWNSPOUTING

DESIGNED TO SUPPORT U-TROUGH ON BIN ROOFS

10"-NOT AVAILABLE (USE TWO 10" TWO-WAY VALVES)

6" 8" 10" 13"

Round Flange Ring

6" 8" 10" A 10" 121/2" 151/2" No. 034502 034516 034524

Two-Way Valve

45˚ A

Part No.

13" (12")

Net Ea.

6" I.D. WITH SQUARE 5 FT. FLANGE RING WITHOUT SQUARE 5 FT. AND FLANGE RING 10 FT.

8" I.D. 5 FT.

10" I.D. 5 FT.

5 FT. AND 5 FT. AND 10 FT. 10 FT.

WT.

NE 023221 $ 471.70 97 NE 023238 157.60 5 NE 023320 297.00 55 NE 036431 208.60 30 NE 035509 389.90 60 NE 035385 25.25 4 NE 035166 17.15 5 NE 035181 18.55 5 NE 024174 198.00 23

The Basic U-Trough Auger Assemblies are shown on the adjacent page.

NE 024085 328.80 84 NE 024112 567.00 110

Box & Crating Charges on Some Items May Be Added NE 036792 40.05 3

• DAVENPORT, IA

(800) 553-6975

E0513


Equipment Prices Include: Discharge Head with Heavy-Duty Auger Sealed, Self-Aligning Bearing Drive Kit (Driven Pulley & Belt) E-Z OFF (Motor Mount) Belt Shield

Discharge Heads for Horizontal Unloading Order motor and motor pulley separately.

Fixed Angle Discharge Heads

Order tube and auger extensions separately to make up your own lengths.

DISCH. HD. LENGTHS SIZE TUBE AUGER 6" 24" 301/2" 8" 24" 33" 10" 30" 43" 12" 36" 52"

Discharge Heads for Variable Height Inclined Unloading

E-Z OFF Motor Mount

Optional Discharge Spout

DRY CORN CAPACITIES 6" to 8" - 1000 BPH 8" to 10" - 2000 BPH 10" to 12" - 3500 BPH 12" to 12" - 4200 BPH

Call for Specifications on 10" Horizontal - 12" Incline & 12" Horizontal - 12" Incline. Horizontal to Incline Size Bin Diameter HP Belts Part No. Net Ea. 6" Horizontal to 8" Incline Up to 21' Dia. 1.5 1 NE 018982 $975.00 22' to 33' Dia. 2 1 NE 018982 975.00 34' to 48' Dia. 3 2 NE 019751 999.00 8" Horizontal to 10" Incline Up to 36' Dia. 3 2 NE 019752 1046.00 37' to 78' Dia. 5 2 NE 019752 1046.00

Horizontal to Incline Size 6" Horizontal to 6" Incline 6" Horizontal to 6" Incline 6" Horizontal to 8" Incline* 8" Horizontal to 8" Incline 8" Horizontal to 8" Incline 8" Horizontal to 10" Incline* 10" Horizontal to 10" Incline 10" Horizontal to 10" Incline * NOTE” When stepping up in size from horizontal to incline, underbin tube must be at least 18" longer than the bin radius for clearance of control rods.

Vertical Unloading Auger System

adjustable spout swivels and adjusts up and down

10'6" Discharge Height (bottom of spout to horizontal auger center line at 45˚) Cushion box grain transfer boot with large inspection cover

(R) P.T.O. Shaft with built-in shear clutch (accessory)

pedestal stand

Underbin Auger included

OPTIONAL ACCESSORIES

Wt. 110 113 131 221 224 262 234 237

45˚ Alternate Spout (swivels only)

DISCHARGE HEIGHTS 6" adj. spout - 10'7" 6" 45˚ spout - 11'3" 8" adj. spout - 10'6" 8" 45˚ spout - 11'0"

5' long flex tube (accessory)

(To horizontal auger center line)

V-Belts - 6" Units Chain - 8" units

Standard Shielding HORSEPOWERS (DRY CORN RATED)

Sleeve connection allows more or less auger to be exposed in the hopper to adjust unloading rate

Size Bin Dia. 6" 14-25' 6" 26-60' 8" 14-60'

HP 3 5 7.5

Not Included: Motor 3.2" 2-Groove Motor Pulley (6" units) Optional Flex Tube

6" - DB206E 6" - DB206E 8" - DB8206E 8" - DB8206E with Adjustable Spout with 45˚ Round Spout with Adjustable Spout with 45˚ Round Spout Bin Dia. Part No. Net Ea. Wt. Part No. Net Ea. Wt. Part No. Net Ea. Wt. Part No. Net Ea. Wt. 15' NE 019578 $2585.00 268 NE 019593 $2705.00 266 NE 019620 $3079.00 398 NE 019635 $3168.00 395 18' NE 019579 2593.00 273 NE 019594 2713.00 271 NE 019621 3085.00 407 NE 019636 3175.00 404 21' NE 019580 2601.00 278 NE 019595 2721.00 276 NE 019622 3090.00 415 NE 019637 3181.00 412 22' NE 019581 2608.00 280 NE 019596 2729.00 278 NE 019623 3096.00 418 NE 019638 3186.00 415 24' NE 019582 2617.00 283 NE 019597 2737.00 281 NE 019624 3102.00 419 NE 019639 3192.00 416 25' NE 019583 2624.00 285 NE 019598 2745.00 283 NE 019625 3108.00 420 NE 019640 3198.00 417 27' NE 019584 2633.00 287 NE 019599 2753.00 285 NE 019626 3114.00 421 NE 019641 3204.00 418 28' NE 019585 2641.00 289 NE 019600 2762.00 287 NE 019627 3120.00 423 NE 019642 3210.00 420 30' NE 019586 2649.00 292 NE 019601 2769.00 290 NE 019628 3127.00 427 NE 019643 3216.00 424 33' NE 019587 2657.00 206 NE 019602 2776.00 294 NE 019629 3133.00 433 NE 019644 3222.00 430 36' NE 019588 2666.00 301 NE 019603 2785.00 299 NE 019630 3139.00 438 NE 019645 3228.00 435 42' NE 019589 2673.00 317 NE 019604 2793.00 315 NE 019631 3144.00 449 NE 019646 3235.00 446 48' NE 019590 2681.00 332 NE 019605 2801.00 331 NE 019632 3151.00 465 NE 019647 3240.00 462 54' NE 019591 2689.00 347 NE 019606 2809.00 345 NE 019633 3156.00 481 NE 019648 3247.00 478 60' NE 019592 2697.00 362 NE 019607 2817.00 360 NE 019634 3163.00 507 NE 019649 3252.00 504

Part No. List Price Wt.

6" 048493 204.75 27 8" 048494 211.30 28 ELECTRIC DRIVE KIT for 206P Series

Size Part No. List Price Wt. 6" 019060 376.00 100 8" 019387 427.00 156 PTO SHAFT w/ Built-In Shear Clutch

Size Part No. List Price Wt. 1-1/4" 1002172 481.00 53

(800) 228-9666

sealed bearings on 6" units. 8" units have oil enclosed right-angle gear box

Prices Include: Underbin Auger Cushion Box Transfer Boot 13' Inclined Auger Adjustable Bin Bracket Motor Mount Connecting Sleeve Drive Shielding Adjustable or 45˚ Round Spout Drive Kit (motor sprocket included with 8" units)

SUPPORT STAND for Inclined Augers

DULTMEIER SALES • OMAHA, NE

adjustable bin bracket

Cushion box grain transfer boot with capped drain (construction resists wear).

Not Included: Optional PTO Shaft Optional Support Stand

Size

Adjustable Spout (swivels and up-down)

large inspection cover

sealed bearings on 6" units. 8" units have oil enclosed right-angle gear box

Net Ea. $ 659.00 664.00 822.00 710.00 716.00 1207.00 1257.00 1321.00

VARIABLE HEIGHT INCLINE REQUIREMENTS Combined Incline & 6" Underbin 8" Underbin U-Bin Auger length. HP Belts Pulley HP Belts Pulley Up thru 21' 1.5 1 3.2 3 2 3.2 22' thru 30' 2 1 3.2 3 2 3.2 31' thru 33' 2 1 3.2 3 2 3.2 34' thru 36' 3 2 3.2 3 2 3.2 37' thru 42' 3 2 3.2 5 2 3.2 43' thru 48' 3 2 3.2 5 2 3.2 49' thru 60' 5 2 3.2 61' thru 78' 5 2 3.2

galvanized tube

Adjustable Support Stand (accessory item)

Sleeve connection allows more or less auger to be exposed in the center hopper to adjust the unloading rate.

Part No. Belts NE 047920 1 NE 048839 2 NE 047927 2 NE 047934 2 NE 048886 3 NE 047941 2 NE 047948 2 NE 048803 3

DB206E & DB8206E Electrically Driven

galvanized tube

Inclined Unloading Auger System

6" - DB206P 8" - DB8206P Bin. Dia. Part No. Net Ea. Wt. Part No. Net Ea. Wt. 15' 019552 $2132.00 259 019565 $2691.00 416 18' 019553 2132.00 264 019566 2704.00 423 21' 019554 2156.00 269 019567 2718.00 430 22' 019555 2168.00 271 019568 2732.00 433 24' 019556 2180.00 274 019569 2745.00 435 25' 019557 2192.00 277 019570 2759.00 436 27' 019558 2204.00 279 019571 2772.00 438 28' 019559 2215.00 281 019572 2786.00 440 30' 019560 2228.00 284 019573 2799.00 444 33' 019561 2240.00 288 019574 2812.00 450 36' 019562 2252.00 292 019575 2826.00 455 42' 019563 2263.00 300 019576 2840.00 465 48' 019564 2276.00 308 019577 2851.00 474 54' 019616 2288.00 320 019618 2865.00 485 60' 019617 2300.00 330 019619 2878.00 495

MOTOR PULLEY SIZE Up to 7-1/2hp - 3.2" 10hp to 15hp - 4.0" 20hp - 6.0"

Specifications Ref. 6" to 8" 8" to 10" A 6" Dia. 8" Dia. B 8" Dia. 10" Dia. C 12" 12" D 9-1/4" 11-1/8" E 48" 46" F 17-1/2" 17" G 57" 58" H 60" 60"

Variable height inclined discharge heads are available in 6", 8", 10" and 12". Horizontal to Incline transition can step up one auger size, i.e. a 6" horizontal unloading auger can be fit to a 6" or 8" inclined discharge head. All NECO variable height discharge systems can be inclined from 15 to 35 degrees.

DB206P & DB8206P, PTO Driven

DISCHARGE HEADS W/MOTOR MOUNT DRIVE KIT, AND BELT SHIELD BELT HP Part No. Net Ea. WT. 1 2 NE 047192 $624.00 153 2 3 - 5 NE 047193 618.00 156 10" 3 7.5 - 10 NE 047194 681.00 159 4 15 NE 047195 889.00 195 2* 5 - 7.5 NE 046000 1457.00 196 2** 10 - 15 NE 048837 2464.00 272 3** 20 NE 047196 2493.00 276 3 5 - 10 NE 047197 818.00 217 4 15 NE 047198 1030.00 231 12" 2* 5 - 7.5 NE 046001 1562.00 257 2** 10 - 15 NE 047199 2572.00 300 3** 20 NE 047200 2601.00 306

Includes Base Plate, Clamp Bands & Hardware.

Prices Include: Modular Discharge Head with heavy duty flight Sealed self-aligning bearing Coupler Box (with size transition if needed) Stub Auger with U-joint Cable support hardware (cable not included) E-Z OFF Motor Mount Drive Kit Belt Shield Not Included: Motor and Motor Pulley 1/4" Cable for support Auger Extension to vary incline auger length

Prices Include: Underbin Auger 19' Inclined Auger Adjustable Spout Cushion Box Transfer Boot Connecting Sleeve

DISCHARGE HEADS W/MOTOR MOUNT DRIVE KIT, AND BELT SHIELD BELT HP Part No. Net Ea. WT. 1 THRU 2 NE 047186 $332.80 75 2 3 - 5 NE 047187 357.60 77 6" 3 7.5 NE 047188 367.70 81 1* THRU 3 NE 048489 1253.00 112 2* 5 - 7.5 NE 048490 1273.00 114 1 THRU 2 NE 047189 341.40 83 2 3 - 5 NE 047190 366.30 85 8" 3 7.5 - 10 NE 047191 390.50 89 1* THRU 3 NE 048488 1183.00 121 2* 5 - 7.5 NE 048487 1198.00 124

E-Z OFF Motor Mount Less Pivot Plate 6" 8" NE 047350 $73.95 NE 047351 $77.55

NECO’s Fixed Angle Discharge Heads are designed to give that extra height that horizontal units cannot provide. It is ideal for unloading into transport augers or equipment like roller mills and grinder/mixers. Connecting sleeve connection between the underbin tube and the inlet allows for extra capacity adjustment. Cable bracing with turnbuckle is standard.

Prices Include: Main Unit with Coupler Box E-Z OFF Motor Mount Drive Kit & Belt Shield Cable Braces & Discharge Spout Stub Auger with U-Joint Not Included: 1800 RPM Motor 3.2" Motor Pulley

421

www.dultmeier.com

• DAVENPORT, IA

(800) 553-6975

E0511


Grain Equipment • Fans • Heaters

422

Grain Leveler FITS FILL HATCHES UP TO 30" PERMANENTLY LUBRICATED DRIVE SHAFT BEARINGS ADJUSTABLE FLOW CONTROL GATES

Aeration Fans • Housing is G90 Galvanized

Capacity Dry Corn Rated (BPH)

Steel

• Airfoil Design Propellers • Prewired Motors • Rolled Angle Flanges

Bin Dia. Per Hour

GRAIN SPREADING PANS

D

15' 3000 21' 3000 24' 2900 30' 2800 36' 2500 42' 2000 48' 1600

Totally Enclosed Fan Cooled 110-Volt Motor

Built-in flow control assures better leveled grain. “Dual” spreading pans allow up to 3000 BPH capacity. Easily adjusted from top of hatch without removing spreader. By using the adjusting tool, any part of the spreader can be adjusted from the hatch without removing the spreader. Every adjustable part is spring loaded. Adjusting tool is furnished with each spreader. Flow control gates will prevent grain from being deposited higher on one side of the bin than the other. The flow control gates are adjusted inward until the grain starts to back up into the funnel. This will control the flow of grain onto the grain pans in a steady and positive manner and will also create a cushion for incoming grain. Part No.

Wt.

Net Ea.

NE 032135 Spreader With 1/2HP Motor 86 lbs. $ 1014.00

B & W Grain Aerator & Drier Just screw the aerator into your grain, plug it into any outlet and it goes to work immediately. Rugged fan is powered with 115-volt, 60 cycle motor. A 12" FAN SUCKS OUT A LARGE Works in auger holes VOLUME OF HOT, DAMP AIR. KEEPS GRAIN FRESH AND COOL. Economical drying and aerating of your grain in either flat or round storage. Instant action to remove hot spots. Aerates up to 5,000 bushes of grain at one time. Reaches deep - aerates grain up to 18 feet deep. Extra tubes may be purchased and fan heads may be moved around as needed.

D

Aerator Head

Sucks out moisture & heat

Part No. BW 334TB BW 334HD BW A1

334TB Tube

Description 5" Tube Only. Less Fan Unit..................................... Fan & Motor Only - Standard, 1/12 HP................... 1/12 HP Motor for 334HD.......................................

NECO Axial Flow Fans get seed or grain moisture down to safe levels, fast, and keep it down. This dependable moisture control means you can store your seed or grain with confidence until you need it. For future feed usage or until the marketplace is right. Propellers are direct-connected to 3600 RPM motors, which are prewired. Axial crop drying fans with starters include interlock receptacle for connection to bolt on gas heater. Supplied less motor starter unless shown. Part No. Size HP Phase Voltage †CFM NE 04AF2081 12" Fan 3/4 1 115/230 2500 NE 04AF4101 14" Fan 1 1 115/230 3900 NE 04AF4103 14" Fan 1 3 230/460 3900 NE 04AF6153 16" Fan 1-1/2 3 230/460 4305 NE 04AF8301 18" Fan 3 1 230 6500 NE 04AF8303 18" Fan 3 3 230/460 6500 NE 04AF4501 24" Fan 5 1 230 12750 NE 04AF4503 24" Fan 5 3 230/460 12750 NE 04AC4753 * 24" Fan 7-1/2 3 230 13600 NE 04AC8103 * 28" Fan 15 3 230 19500 * Supplied with Motor Starter. †Cubic feet per minute (cfm) at 0.0" water static pressure. Note: Other Sizes & 3-Phase Available.

Part No. NE 04HC24LPV NE 04HL24LPV NE 04HL28LPV

Description Diameter Wt. Net Ea. Axial Heater - LPG with Vaporizer 24" 246 lbs. $ 2649.00 Axial Hi-Lo Heater - LPG with Vaporizer 24" 252 lbs. 3099.00 Axial Hi-Lo Heater - LPG with Vaporizer 28" 278 lbs. 3436.00

Visit Our Web-Site: www. dultmeier.com We Now Have Our Catalogs as Well as Parts Schematics Online!

DAVENPORT, IOWA

1-800-228-9666

1-800-553-6975 FAX: 1-563-386-5448

Net Ea. $ 461.60 523.00 627.00 647.00 759.00 796.00 1453.00 1501.00 1701.00 2013.00

Heaters have an all galvanized housing and are to be bolted to axial flow crop drying fans to make a complete fan and heater unit. Units are completely plumbed and wired for connection to fan and gas line.

D

Wt. Net Ea. 30 lbs. $ 104.90 12 lbs. 153.30 5 lbs. 114.70

FAX: 1-402-333-5546

Wt. 54 lbs. 64 lbs. 52 lbs. 66 lbs. 109 lbs. 98 lbs. 238 lbs. 207 lbs. 252 lbs. 303 lbs.

Axial Flow Bolt-On Heaters

Call Us For All Your Grain Handling Needs! OMAHA, NEBRASKA

D

dultmeier.com

E-Mail us: dultmeier@dultmeier.com DULTMEIER SALES • OMAHA, NE

(800) 228-9666

www.dultmeier.com

• DAVENPORT, IA

(800) 553-6975

E0507


Cooling & Exhaust Fans • Wall Shutters Portable Cooling Fans

Galvanized Exhaust Fans General Purpose Exhaust Fans. Smaller size, Direct Drive fans for use anywhere air movement is required to control condensation and reduce stagnant air. Heavy gauge, galvanized frame to reduce rust and corrosion. Built-in shutter with rigid blades. Spiral guard with powder coat finish meets OSHA requirements. Shutters open and close when fan is turned on and off. Single speed, 115 volt motors.

D

GPX Models

Portable Cooling Fans are available in Direct Drive or Pulley Drive design. Ideal for use in work shops, farms, ranches, industrial buildings, dairy barns or factories.

D

Misting Kits

Belt Drive Model

General Purpose Exhaust Fans Part No. Diameter CFM HP Wt. Net Ea. TR GPX1210 12” 1580 1/6 35 lbs. $ 210.60 TR GPX1611 16” 2600 1/4 43 lbs. 273.30 TR GPX2011 20” 3200 1/4 50 lbs. 257.60 TR GPX2413 24” 5460 1/2 66 lbs. 298.00

Direct Drive Fans feature (3) blades and durable steel barrels. Attractive bronze finish. Deep pitched blades for maximum air flow. 10’ grounded cord and spiral wound OHSA wire guards are standard. Wheels for portability. 2-Speed motors are 115 volt. Belt Drive Fans feature 3 or 4 blades and heavy gauge steel barrels. Attractive bronze finish. Belt tensioner, 10’ grounded cord and spiral wound OHSA wire guards are standard. Wheels for portability. 2-Speed motors are 115 volt. (Model TPC4815 has a single speed motor).

PFG Exhaust Fans are ideal for controlling condensation and the reduction of stagnant air in almost any application. Available in Direct Drive or Belt Drive. Galvanized housing, frame, wire guard and blades for superior corrosion-resistance in harsh environments. Single phase, 230 volt motors with thermal protection. Direct drive models feature 16” deep housings and (3) blades. Belt drive models feature 20” housings and (4) blades.

Misting Kits are designed to turn the portable cooling fans into misting machines. Easy-to-install. Creates 300 - 100 micron droplets. Disposable inline filter. 10 to 12 gallon per hour output. Connects to standard garden hose. On-Off valve is included. Direct Drive Blade CFM Ship Part No. Style Diameter High Low Motor Wt. Net Ea. TR CF2421 Direct 24” 3800 3200 1/4 HP 48 lbs. $ 132.90 TR QBD3623 Direct 36” 10900 8800 1/2 HP 96 lbs. 313.10 TR QBD4223 Direct 42” 13200 10200 1/2 HP 101 lbs. 334.40

D

Belt Drive TR QB23623 Belt 36” TR QB24223 Belt 42” TR TPC4815 * Belt 48” * 4 Blade Fan, Single Speed.

PFG

Belt Drive PFG Exhaust Fans (Direct Drive) Part No. Diameter CFM HP Wt. Net Ea. TR PFG3613D 36” 10,740 1/2 98 lbs. $ 433.90 TR PFG4213D 42” 13,060 1/2 126 lbs. 463.60 TR PFG4815D 48” 18,800 1 176lbs. 672.00

PFG Exhaust Fans (Belt Drive) TR PFG3613 36” 10,380 1/2 TR PFG4213 42” 13,640 1/2 TR PFG4815 48” 19,400 1 TR PFG5415 54” 23,800 1

423

132 lbs. 160 lbs. 194 lbs. 237 lbs.

Misting Kits TR MK24 TR MK36 TR MK42 TR MK48

$ 492.90 521.00 679.00 769.00

11000 7600 1/2 HP 92 lbs. $ 322.70 13000 9000 1/2 HP 99 lbs. 336.40 19460 19460 1 HP 215 lbs. 949.00

Misting Kit for 24” Fans................................ Misting Kit for 36” Fans................................ Misting Kit for 42” Fans................................ Misting Kit for 48” Fans................................

3 lbs. $ 119.20 3 lbs. 132.40 3 lbs. 138.00 5 lbs. 146.00

Wall Shutters

Heavy Duty Exhaust Fans VI Series Fans are designed for high flow air movement. Built with extra heavy-duty components. Frames feature a durable, powder-coated finish. All fans in this series are belt drive design with belt tensioner that increases motor life and eliminates belt adjustment. (4) Blade design is standard. Designed for use with optional shutters if required. 115/230 Volt motors are prewired at 115 volt. 230/460 Volt motors are prewired at 230 volt. Single or three phase motors as shown. (Note: VI Series can be ordered as intake fans if required).

Industrial Wall Shutters for VI Series fans. Manual design opens and closes when fan comes on and turns off. All sizes are 4” deep. If used as an intake shutter, electric operators are required. For Part No. Fan Size Wt. Net Ea. TR IWS24 24” 26 lbs. $ 97.00 TR IWS30 30” 29 lbs. 119.70 TR IWS36 36” 39 lbs. 158.50 TR IWS42 42” 44 lbs. 206.00 TR IWS48 48” 55 lbs. 238.00 TR IWS54 54” 76 lbs. 413.10 TR IWS60 60” 88 lbs. 458.10

D

1WS30

D

To Deliver the Best Possible Service

VI Series

to Our Customers,

Part No. Diameter CFM HP Volts TR VI3013 30” 9,000 1/2 HP - 1 PH 115 TR VI3613 36” 10,400 1/2 HP - 1 PH 115 TR VI3614 36” 11,100 3/4 HP - 1 PH 115/230 TR VI4214 42” 14,600 3/4 HP - 1 PH 115/230 TR VI4215 42” 15,900 1 HP - 1 PH 115/230 TR VI4815 48” 20,500 1 HP - 1 PH 115/230 TR VI5417 54” 20,500 2 HP - 3 PH 230/460 TR VI6017 60” 30,200 2 HP - 3 PH 230/460

Wt. Net Ea. 111 lbs. $ 409.10 120 lbs. 433.30 134 lbs. 497.00 152 lbs. 547.00 162 lbs. 635.00 187 lbs. 692.00 338 lbs. 1793.00 418 lbs. 2233.00

DULTMEIER SALES • OMAHA, NE

(800) 228-9666

Dultmeier Sales Strives to Live Up to A Set of Core Values, One of Which is to “Drive Change” •

www.dultmeier.com

• DAVENPORT, IA

Proactively improve processes and procedures

(800) 553-6975

E0992


Chemical Injectors

424

DOSATRON Non-Electric, Self-Priming, Water Driven Chemical Injectors give an accurate and uniform feeding of soaps, waxes or other chemicals into water lines!! Ideal for a wide variety of Car Wash, Industrial, Turf and Pest Control applications.

Water Driven, Constant Output, Easy to Adjust ! Note: On Chemical use, always check Chemical Compatibility of Components before using. PVDF & Hastelloy construction available for corrosive chemicals. (Bypass Models also available).

• External Ratio Adjustment: Injection ratios can be easily changed with one external adjustment.

• Highly Accurate: Set it and forget it!! Injectors compensate automatically for any change in water pressure.

• Easy to Use: No assembly required. Simple hookup can be completed without tools.

• Portability: Units can be permanently mounted or portable and setup in minutes. Ideal for spot feeding or fungicide drenching.

• Minimal Operation Costs: Driven from existing water line pressure.

• Self-Priming: Up to 13' Lift. • Rated to 104° F.

• Low Maintenance: Yearly disassembly & seal replacement can be done in minutes.

• Bypass Models also available

RECOMMENDED INSTALLATION Mixing Chamber

11 GPM Blended Solution

water flow

D D

D

20 GPM

Externally adjustable ratios

14 GPM D25

Intake from concentrate container

D45 Series

D14MZ2

OPERATING PRINCIPLE Port Maximum Part No. Flow Rate Size Flow Range DO D25RE1500VFII 11 GPM 3/4” MPT 0.05 to 11 GPM DO D14MZ5VVFII **11 GPM 3/4” MPT 0.05 to 11 GPM DO D14MZ10VVFII **11 GPM 3/4” MPT 0.00 to 11 GPM DO D14MZ5 14 GPM 3/4” MPT 0.05 to 14 GPM DO D14MZ10 14 GPM 3/4” MPT 0.05 to 14 GPM DO D14MZ2 14 GPM 3/4” MPT 0.05 to 14 GPM DO D45-3000 20 GPM 1” MPT 0.4 to 20 GPM DO D45RE15VII 20 GPM 1” MPT 0.4 to 20 GPM DO DSA45-3 20 GPM 1” MPT 0.4 to 20 GPM DO D8R 40 GPM 1-1/2” MPT 2.2 to 40 GPM DO D8RE5VFII 40 GPM 1-1/2” MPT 2.2 to 40 GPM ** Industrial Models for Viscous Chemicals.

The injector is installed in-line. Incoming water (1) drives the piston (4) moving it up and down, pulling the concentrate (3) into the mixing chamber (5), accurately blending it with the water flow before passing through the outlet (2). Because of its volumetric design, the injector maintains a constant ratio of concentrate to water flow regardless of water pressure and flow.

Pressure Injection Injection Range Ratio Percent Net Ea. 4.3 to 85 PSI 1:1500 to 1:500 .07 to 0.2% $ 378.80 4.3 to 85 PSI 1:200 to 1:20 0.5 to 5.0% 807.00 4.3 to 85 PSI 1:100 to 1:10 0.2 to 1.5% 868.00 4.3 to 85 PSI 1:200 to 1:20 0.5 to 5.0% 595.00 4.3 to 85 PSI 1:100 to 1:10 1.0 to 10% 605.00 4.3 to 85 PSI 1:500 to 1:50 0.2 to 2.0% 392.90 7 to 70 PSI 1:1000 to 1:3000 0.1 to .03% 1106.00 7 to 70 PSI 1:500 to 1:66 0.2 to 1.5% 543.00 7 to 70 PSI 1:200 to 1:33 0.5 to 3.0% 717.00 2 to 110 PSI 1:500 to 1:50 0.2 to 2.0% 904.00 2 to 110 PSI 1:100 to 1:20 1.0 to 5% 1399.00

Panel Units Water Driven, Non-Electric Chemical Dispensers can be used for a wide variety of chemicals including tire cleaner, presoak, foam brush, wheel cleaners, wax and protectants. Available in 1, 2 or 3 product systems. Units are mounted on aluminum bases for wall mounting.

D

Water drive design ensures that injection ratio is always the same. Fluctuations in water pressure to the systems does not affect chemical injection rates. 24-Volt or 110-Volt solenoids are only used to control the water flow to the dispensers. Note: We can build these systems to order with your choice of injector models. Part No.

Number of Products

Net Ea.

DO DO16P 1 $ 859.00 DO DO16P-2 2 859.00 DO DO16P-3 3 2181.00 DO DO16P-3F * 3 2174.00 * For Triple Foam in Automatics or Tunnels. DULTMEIER SALES • OMAHA, NE

(800) 228-9666

DO16P-3

www.dultmeier.com

• DAVENPORT, IA

(800) 553-6975

E0390


Chemical Injectors

425

Water Driven Chemical Injectors from Dema Engineering. Solutions are added into the water flow for accurate mixing and injection. Injection rates remain constant regardless of flow or pressure. Water driven design means no electricity is required. Pressure range from 3.0 to 120 PSI. MixRite Injectors are ideal for use with chemicals and fertilizers. Applications include car and truck wash, agriculture, greenhouses and industrial applications. Bodies are either Nylon or Kynar (PVDF) construction. Kynar models feature PVDF bodies with Hastelloy springs and Extreme Viton® seals for aggressive chemicals that may contain acids. (CL) models feature nylon bodies with Hastelloy springs and Extreme Viton® seals for compatibility with corrosive chemicals. Models are shown with or without control valves that allow for the shut off of the chemical draw line while still allowing water flow through the unit.

D

579 Model

14CW05 / 1410 Models Poly Bodies (Aflas Seals) Part No. Valve Body Port Size Flow Range Injection Range Wt.

DE 569OF DE 1402A DE 1402M DE 572 DE 1405M DE 1410A DE 1410M

Yes No Yes No Yes No Yes

Poly Poly Poly Poly Poly Poly Poly

3/4” MPT 3/4” MPT 3/4” MPT 3/4” MPT 3/4” MPT 3/4” MPT 3/4” MPT

.9 to 11 GPM .9 to 14 GPM .9 to 14 GPM .9 to 11 GPM .9 to 14 GPM .9 to 14 GPM .9 to 14 GPM

1000:1 to 100:1 300:1 to 50:1 300:1 to 50:1 250:1 to 25:1 250:1 to 25:1 100:1 to 10:1 100:1 to 10:1

4 lbs. 4 lbs. 4 lbs. 4 lbs. 4 lbs. 4 lbs. 4 lbs.

Poly Bodies (Viton® Seals) Part No. Valve Body Port Size Flow Range Injection Range Wt.

DE 569CL DE 572CL DE 14CW05

Yes No No

Poly Poly Poly

3/4” MPT 3/4” MPT 3/4” MPT

.9 to 11 GPM .9 to 11 GPM .9 to 14 GPM

1000:1 to 100:1 250:1 to 25:1 100:1 to 20:1

4 lbs. 4 lbs. 4 lbs.

Kynar Bodies (Viton® Seals) Part No. Valve Body Port Size Flow Range Injection Range Wt.

DE 569PV DE 570PV DE 571PV DE 572PV DE 573PV

Yes No Yes No Yes

Kynar Kynar Kynar Kynar Kynar

3/4” MPT 3/4” MPT 3/4” MPT 3/4” MPT 3/4” MPT

.9 to 11 GPM .9 to 11 GPM .9 to 11 GPM .9 to 11 GPM .9 to 11 GPM

1000:1 to 100:1 300:1 to 50:1 300:1 to 50:1 250:1 to 25:1 250:1 to 25:1

4 lbs. 4 lbs. 4 lbs. 4 lbs. 4 lbs.

Net Ea.

$ 302.00 344.50 344.50 290.60 389.40 459.60 469.80

D

Net Ea..

$ 429.30 443.40 388.90

Net Ea.

$ 497.00 492.90 505.00 492.40 495.10

CL for Corrosive Liquids

DE 576IN DE 577 DE 579

Valve

Body

Port Size

Flow Range

Injection Range

Wt.

Net Ea.

No Yes Yes

Poly Poly Poly

3/4” MPT 3/4” MPT 3/4” MPT

.9 to 11 GPM .9 to 11 GPM .9 to 11 GPM

500:1 to 50:1 500:1 to 50:1 250:1 to 25:1

4 lbs. 4 lbs. 4 lbs.

$ 372.70 396.20 396.20

KYNAR Models. Most Chemically Resistant

D

BYPASS Models - Poly Bodies Bypass units are designed to keep aggressive chemicals out of the flow chamber while protecting internal parts. Part No.

D

D

TF Series Units. Designed specifically for the Agriculture Industry for fertilizer injection. Bodies are nylon construction, seals are EPDM. TF10 & TF25 models come with support legs. Rated from 15 to 120 PSI. Part No.

DE TF5-1 DE TF5-2 DE TF5-5 DE TF10-2 DE TF10-5 DE TF25-1 DE TF25-2 DE TF25-5

Port Size

Body

Flow Range

Injection Range

Wt.

Net Ea.

1” MPT 1” MPT 1” MPT 1-1/2” MPT 1-1/2” MPT 2” MPT 2” MPT 2” MPT

Nylon Nylon Nylon Nylon Nylon Nylon Nylon Nylon

1.0 to 22 GPM 1.0 to 22 GPM 1.0 to 22 GPM 2.0 to 45 GPM 2.0 to 45 GPM 9.0 to 110 GPM 9.0 to 110 GPM 9.0 to 110 GPM

1:1000 to 1:100 1:500 to 1:50 1:100 to 1:20 1:500 to 1:50 1:100 to 1:20 1:1000 to 1:100 1:333 to 1:40 1:100 to 1:20

13 lbs. 13 lbs. 13 lbs. 16 lbs. 16 lbs. 46 lbs. 46 lbs. 46 lbs.

$ 447.50 445.70 691.00 661.00 659.00 1633.00 1599.00 1716.00

DULTMEIER SALES • OMAHA, NE

(800) 228-9666

www.dultmeier.com

Models TF10 / TF25

Model TF5

Viton® is a registered trademark of DuPont Performance Elastomers

• DAVENPORT, IA

(800) 553-6975

E0696


Chemical & Diesel Injectors

426

Bypass Lever

Chemical Injectors

Chemilizer Injectors Chemilizer is an Industry-Leading, Water-Driven Chemical Injector designed for a wide variety of applications including car/truck wash, animal health, horticulture and food processing. Powered by the water flow, the internal motor drives the chemical pump. Extremely precise and accurate. Injection rates stay consistent no matter if changes occur in water flow or pressure.

Self-Priming, Fluid Driven Proportional Injectors use water flow as the power source, no electricity is required. Injection ratios are consistent regardless of variances of flow or pressure. Chemical-resistant bodies and internals with Viton® seals. Built in stop/start switch to allow injection to stop without affecting water flow. Injection ratio can be adjusted while unit is operating. 3-Year Warranty. Made in the USA.

Features: Polypropylene housing andViton® diaphragm • Rated to 100° F. • Viscosities to 1500 cps. • Ports are 3/4” MPT • Rated from 3 to 85 PSI and .02 to 11 GPM.

D

Features: Rated to 100° F. • Vertical suction to 13’ and horizontal suction to 49’ • Maximum viscosities to 1500 cP, (Honey) • Ports are NPT but BSP also available • Models are rated from 7 GPM to 100 GPM for nearly any application • 140 Mesh (104 micron) inlet strainer is required for valid warranty.

Ideal for use in the following markets: Animal Health, Horticulture, Food Processing, Vehicle Wash, Pest Control, Water Treatment and many more . . .

D

Bypass Lever

1009 Series are pump cartridges only to convert existing fixed rate Chemilizer units to the new adjustable rate design. Easy 1/4 turn installation.

D

Adjustable Chemilizer

Corrosive Kits Available for most models. Injects solutions downstream or “in series”. For aggressive applications. Chemicals do not enter unit.

D

1009 Series Chemilizer Part No. Style Injection Rate Wt. Net Ea.

DM CH9000-AV1 DM CH9000-AV2 DM CH9000-AV3 DM 10095982 DM 10095929 DM 10095984

D

Injector Injector Injector Pump Only Pump Only Pump Only

20:1 to 64:1 50:1 to 164:1 150:1 to 500:1 20:1 to 64:1 50:1 to 164:1 150:1 to 500:1

8 lbs. 8 lbs. 8 lbs. 2 lbs. 2 lbs. 1 lbs.

$ 309.30 288.90 264.20 107.30 86.05 102.60

Diesel Additive Injectors

DM SCT

Up to 12 GPM Units Port Flow Pressure Injection Part No. Size Range Range Ratio Net Ea. DM 116381 1/2” NPT .03 to 3.5 GPM 6 to 100 PSI 1:200 to 1:50 $ 248.20 DM 116383 1/2” NPT .03 to 3.5 GPM 6 to 100 PSI 1:50 to 1:20 252.00 DM 116385 1/2” NPT .03 to 3.5 GPM 6 to 100 PSI * 10 to 1 399.00 DM 112638 3/4” NPT .03 to 12 GPM 6 to 140 PSI 1:4000 to 1:250 383.90 DM 112630 3/4” NPT .03 to 12 GPM 6 to 140 PSI 1:500 to 1:100 285.20 DM 112632 3/4” NPT .03 to 12 GPM 6 to 140 PSI 1:200 to 1:40 285.20 DM 112634 3/4” NPT .03 to 12 GPM 6 to 140 PSI 1:100 to 1:20 383.90 DM 112606 3/4” NPT .07 to 10 GPM 6 to 65 PSI 1:50 to 1:10 583.00 DM 112620 3/4” NPT .07 to 10 GPM 6 to 65 PSI 1:25 to 1:5 1051.00 DM SCT-M Corrosive Transfer Kit, 12 GPM............................................ 56.80 * Fixed Injection Range.

Non-Electric, Fluid-Driven Additive Injectors. Consistent, proportional injection regardless of changes in flow or pressure. Eliminates splash blending. Designed exclusively for diesel additive agents such as: Anti-gel, lubricosity, winter blends, microbicide or summer blends. Ideal for use in the following markets: Bulk Storage, Fuel Marketers, Refining, Transit, Truck Fleets and School Districts.

114556

Single Injection

15 & 20 GPM Units Port Flow Pressure Injection Part No. Size Range Range Ratio Net Ea. DM 113228 1” NPT .04 to 20 GPM 5 to 100 PSI 1:4000 to 1:333 $ 515.00 DM 113202 1” NPT .04 to 15 GPM 3 to 60 PSI 1:500 to 1:40 315.40 DM 113206 1” NPT .04 to 20 GPM 5 to 100 PSI 1:250 to 1:20 659.00 DM 113207 1” NPT .04 to 20 GPM 5 to 65 PSI 1:50 to 1:10 953.00 DM SCT Corrosive Transfer Kit, 20 to 45 GPM................................... 68.40

30 GPM Units Port Flow Pressure Injection Part No. Size Range Range Ratio Net Ea. DM 113229 1” NPT .15 to 30 GPM 5 to 100 PSI 1:4000 to 1:333 $ 585.00 DM 113209 1” NPT .15 to 30 GPM 5 to 100 PSI 1:500 to 1:40 459.10 DM 113210 1” NPT .15 to 30 GPM 5 to 100 PSI 1:250 to 1:20 672.00 DM SCT Corrosive Transfer Kit, 20 to 45 GPM................................... 68.40

D

Single or dual injection capabilities. Rated to 200 GPM.

114557

Note: 400 GPM units available on request.

Dual Injection

Port Flow Injection Part No. Injection DM 114556 Single DM 114557 Dual

Size Range 3” Flange 40 to 200 GPM 3” Flange 40 to 200 GPM

Ratio 1:2000 to 1:800 1:2000 to 1:800

Net Ea. $ 2878.00 3409.00

Injector for Wettable/ Soluble Powders

45 GPM Units Port Flow Pressure Injection Part No. Size Range Range Ratio Net Ea. DM 113230 1-1/4” NPT .50 to 45 GPM 5 to 100 PSI 1:4000 to 1:333 $ 883.00 DM 113212 1-1/4” NPT .50 to 45 GPM 5 to 100 PSI 1:500 to 1:40 697.00 DM 113215 1-1/4” NPT .50 to 45 GPM 5 to 80 PSI 1:250 to 1:20 883.00 DM SCT Corrosive Transfer Kit, 20 to 45 GPM................................... 68.40

D

D

All of the same features as the standard DOSMATIC Injectors but with special lower end kits that allow for the injection of wettable or soluble powder solutions. Standard with Viton® seals.

80 & 100 GPM Units

Viton® is a registered trademark of DuPont Performance Elastomers

Port Flow Pressure Injection Part No. Size Range Range Ratio Net Ea. DM 114151 2” Flange 20 to 100 GPM 20 to 120 PSI 1:1000 to 1:200 $ 2056.00 DM 114153 2” Flange 20 to 100 GPM 20 to 120 PSI 1:200 to 1:100 2018.00

Port Flow Pressure Injection Part No. Size Range Range Ratio Net Ea. DM 113205WSP 1” NPT .04 to 20 GPM 5 to 100 PSI 1:500 to 1:40 $ 331.30

DULTMEIER SALES • OMAHA, NE

(800) 228-9666

www.dultmeier.com

• DAVENPORT, IA

(800) 553-6975

E0905


Thermostats • Thermometers • Switches Hot Water Thermostats

Thermometers

Thermostats for controlling water temperature on hot water pressure washer machines. Panel mount or flow-through designs.

Ridgid Weld

Back Mount Adjustable Hinge

LN250

D

GPT Models feature dual scales for Fahrenheit and Celsius, designed to be panel mounted. Rated to 4000 PSI. Standard with 60" capillary tube and copper immersion bulb. Rated to 16 amp, 380 volt. Accuracy to ±5%.

Industrial Thermometers for checking temperatures in tanks, plumbing lines, vessels, etc. 304 Stainless Steel welded construction for corrosion resistance to most chemicals. Rustproof, dust proof, leakproof. Extra heavy glass lens.

D

GPT3090 & GPT30150

D

100272 D

Model 100272 is flow through design rated to 35 gpm and 5000 PSI. (2) 1/2" FPT ports. Rated to 200° F. Electric load rating is 120 volts @ 10 amps. Part No.

Temperature Rating

IP GPT3090 IP GPT30150 WT 00818 IP 100272

86° F. to 194° F. 86° F. to 320° F. 50° F. to 300° F. Ambient to 200° F.

Net Ea.

$ 32.40 32.40 54.05 136.90

Part No.

Temperature Dial MPT Mount Range: Face Port Type

ST J701 ST LN250 ST LN256 ST BC350R ST B1B5H

-40° - 160° F. 0° - 250° F. 50° - 400° F. 0° - 220° F. 0° - 220° F.

Air Impulse Switches for control of doors, gates, lights, etc. Operated by air impulse from driveway bell hoses Available in normally open or normally closed models. Also available are the Weathertite switches. Barb stem will handle 3/8" or 1/2" hose. Weatherproof aluminum box available on 32 Series Switches.

D D

16NO

32NC

Part No. AM 16NO AM 16NC

Style Net Ea. Normally Open.................. $ 15.10 Normally Closed................ 25.80

AM 32NC AM 32NO AM 32NC-WB AM 32NO-WB

Weathertite Switches Normally Closed-no box.... 38.75 Normally Open-no box....... 19.00 Normally Closed with box.. 35.90 Normally Open with box.... 32.10

Use On Hay Bales • Compost & Forage Piles • Stored Grain Spoilage Check • Soil Temperatures • Mulch Piles

T675A-1011 2E399

D D

34”

Thermostats For remote control of Weep or Floor Heat Systems designed for freeze prevention. Standard with a capillary tube so that the unit can be mounted in the pump room and the bulb can be located in an outside area. Temperature differential is + or - (1) degree F. on the Model T675A-1011 and + or - (4.5) degrees F. on the Model 2E399.

For Weep Systems use these units with a “normally open” solenoid (not included) to activate the weep water at desired outside temperature. (T675A-1029 is a Slabstat thermostat for use in floor heat installations).

Features: Digital Readout (0-200° F.) • Fast & Accurate (+ or - 1.5° F. Accuracy) • Durable Design; Indestructible Fiberglass Shaft • Fast Response Stainless Steel Tip • Waterproof (IP66/67) Battery Included.

Temperature Part No. Volts Tube Range Net Ea. HU T675A-1011 24 Volts - 110 Volts 5' 0 to 100° F. $ 124.80 GN 2E399 110 Volts 8' -30 to 90° F. 100.50 HU T675A-1029 110 Volts * 20’ 0 to 100° F. 155.80 * Slabstat for Floor Heat

Net Ea. $ 198.00

DULTMEIER SALES • OMAHA, NE

Net Ea.

Part No. Net Ea. DR ST250 Surface Thermometer $ 38.15

Temp Probe

Description Temp Probe

Stem

1/4" Back 6" $ 19.85 1/2" Back 2-1/2" 25.95 1/2" Back 2-1/2" 26.00 1/2" Adjustable 2-1/2" 67.20 - Back 5" 5.37

Provides for quick measurement of temperatures of boilers, air ducts, motors, bearings, plumbing lines, etc. Magnetic design allows for easy mounting to any ferrous surface. 2" dual scale measures 0° F. to 250° F. and -20° C. to +120° C.

10% On 5+ - Not Assorted

Part No. IN TEMP

2" 3" 3" 5" 1"

Surface Mount Thermometer

Air Impulse Switches

D

BC350R

Model B1B5H Pocket Thermometer is designed for easy spot checks of temperatures. 1" dial face with 5" probe. Comes with handy pocket case. Range is 0˚ to 220˚ F. Stainless construction.

B1B5H

00818

Thermostat Thermostat Thermostat Thermostat

D

Available in either back mount or adjustable styles (back or bottom). Mounting ports are MPT. Many other stem lengths are available if required. Stem diameter is 1/4".

Model 00818 has a flow through design. Rated to 10 GPM and 4000 PSI. Rated to 120 Volt - 10 Amp or 230 Volt - 5 Amp. 1/2” Ports.

D

427

(800) 228-9666

www.dultmeier.com

• DAVENPORT, IA

(800) 553-6975

E0643


428

Radiant Tube Heaters Radiant Tube Heaters Ideal for Car/Truck Washes, Detail Centers, Auto Service Shops, Farm Buildings, Warehouses, Manufacturing Facilities & Almost Anywhere Heat is Required Re-Verber-Ray Tube Heaters from Detroit Radiant. LP or Natural Gas Fired. 20-50% operating savings over conventional heat systems. Designed to heat floor zones, equipment and people, not the ceiling. No noisy blowers, just quiet, energy efficient operation. Ideal for car/truck washes, detail centers, auto service shops, farm buildings, warehouses, manufacturing facilities and almost anywhere heat is required.

Standard Features on All Units Include: 4” x 10’, 16 gauge radiant tubes • 24” Flexible gas line • Hot surface ignition • CSA, UL, IAS, CE rated • 120V, 60Hz • 4” Duct intake • Operating indicator lights • 1/2” NPT gas inlet • Made in the USA. Note: Gas requirements are 5” minimum WC Natural Gas and 11” minimum WC LP Gas. Straight or U-tubes style as noted.

D

DX3 Aluminized Steel Units are ideal for general heating applications. Coated Aluminized Combustion Chamber • 4” Coated Aluminized Steel Radiant Tubes • Polished Aluminum Reflectors • 50,000 to 200,000 BTU • 20’ to 80’ Lengths. Straight Tube Models Recommended Part No. Length * BTU Tube Mount Height DT DX3-20-50S 21’ 9” 50,000 Straight 9’ - 15’ DT DX3-20-75S 21’ 9” 75,000 Straight 11’ - 18’ DT DX3-30-75S 31’ 5” 75,000 Straight 12’ - 20’ DT DX3-30-100S 31’ 5” 100,000 Straight 13’ - 23’ DT DX3-40-100S 41’ 1” 100,000 Straight 13’ - 23’ DT DX3-40-125S 41’ 1” 125,000 Straight 14’ - 25’ DT DX3-40-150S 41’ 1” 150,000 Straight 15’ - 27’ * Specify LP or Natural Gas.

Wt. 120 lbs. 120 lbs. 160 lbs. 160 lbs. 190 lbs. 190 lbs. 190 lbs.

Call Toll Free For Prices

U-Tube Models Recommended Part No. Length * BTU Tube Mount Height DT DX3-20-50U 13’ 1” 50,000 U-Tube 9’ - 15’ DT DX3-30-100U 17’ 9” 100,000 U-Tube 13’ - 23’ DT DX3-30-125U 17’ 9” 125,000 U-Tube 14’ - 25’ * Specify LP or Natural Gas.

Wt. 120 lbs. 160 lbs. 160 lbs.

Call Toll Free For Prices

Vehicle Storage

DXSS Stainless Steel Units are designed for moist/wet/harsh environments like car wash and truck wash facilities. Coated Stainless Combustion Chamber • Coated Stainless Steel Radiant Tubes • Polished Stainless Reflectors • Stainless Burner • 75,000 to 150,000 BTU • 20’ to 60’ Lengths. Straight Tube Models Recommended Part No. Length * BTU Tube Mount Height DT DXSS-20-75S 21’ 9” 75,000 Straight 11’ - 18’ DT DXSS-30-75S 31’ 5” 75,000 Straight 12’ - 20’ DT DXSS-30-100S 31’ 5” 100,000 Straight 13’ - 23’ DT DXSS-40-100S 41’ 1” 100,000 Straight 13’ - 23’ DT DXSS-40-125S 41’ 1” 125,000 Straight 14’ - 25’ DT DXSS-40-150S 41’ 1” 150,000 Straight 15’ - 27’ DT DXSS-50-100S 50’ 9” 100,000 Straight 15’ - 27’ DT DXSS-50-125S 50’ 9” 125,000 Straight 15’ - 27’ DT DXSS-50-150S 50’ 9” 150,000 Straight 16’ - 30’ * Specify LP or Natural Gas. U-Tube Models Recommended Part No. Length * BTU Tube Mount Height DT DXSS-20-75U 13’ 1” 75,000 U-Tube 11’ - 18’ DT DXSS-30-75U 17’ 9” 75,000 U-Tube 12’ - 20’ DT DXSS-40-100U 22’ 9” 100,000 U-Tube 13’ - 23’ DT DXSS-40-125U 22’ 9” 125,000 U-Tube 14’ - 25’ DT DXSS-40-150U 22’ 9” 150,000 U-Tube 15’ - 27’ * Specify LP or Natural Gas. DULTMEIER SALES • OMAHA, NE

Wt. 145 lbs. 195 lbs. 195 lbs. 235 lbs. 235 lbs. 235 lbs. 290 lbs. 290 lbs. 290 lbs.

Wt. 145 lbs. 195 lbs. 235 lbs. 235 lbs. 235 lbs.

(800) 228-9666

Call Toll Free For Prices

Call Toll Free For Prices

www.dultmeier.com

Distribution Facilities / Warehouses

Accessories Part No. Description Net Ea. DT THET5 Thermostat, Dry Environments, 24-240V $ 37.35 DT TH115 Thermostat, Wet Environments, 24-120V 93.45 DT THCS 5’ Chain & Hook Set, One Required Every 10’ Section, Plus (3) Per Burner Box.. 3.59 DT 4DSK Side Wall Vent Kit...................................... 70.65 DT RTVP4 Roof Vent Kit............................................. 93.35 DT BVP4 4” x 60” Double Wall Vent Pipe................ 38.75 • DAVENPORT, IA

(800) 553-6975

E1038


Infrared Heaters

429

Infrared Gas-Fired Space Heaters

D

High Intensity, Gas Fired Infrared Heaters from RE-VERBER-RAY. DR Series unvented infrared design heats floors, people and equipment. Ceramic burners with stainless steel rods increase temperatures and efficiency. Polished aluminum reflectors. Direct spark ignition with 100% shut-off. Circuit boards designed for high moisture environments. 5 Year burner warranty. CSA and CE certified, UL listed. LP or Natural Gas fired. 120 Volt control (24 volt and millivolt also available). All units are designed to hang from the ceiling. Optional thermostats and chain sets are shown below. Infrared Gas-Fire Space Heaters Mounting Part No. Gas BTU Height * Wt. DT DR30-NFS2 Natural 30,000 12’ - 14’ 18 lbs. DT DR45-NFS2 Natural 45,000 12’ - 14’ 27 lbs. DT DR60-NFS2 Natural 60,000 14’ - 16’ 27 lbs. DT DR75-NFS2 Natural 75,000 15’ - 17’ 36 lbs. DT DR100-NFS2 Natural 100,000 17’ - 20’ 46 lbs. DT DR130-NFS2 Natural 130,000 21’ - 24’ 55 lbs. DT DR160-NFS2 Natural 160,000 24’ - 28’ 65 lbs. DT DR30-PFS2 LP 30,000 12’ - 14’ 18 lbs. DT DR45-PFS2 LP 45,000 12’ - 14’ 27 lbs. DT DR60-PFS2 LP 60,000 14’ - 16’ 27 lbs. DT DR75-PFS2 LP 75,000 15’ - 17’ 36 lbs. DT DR100-PFS2 LP 90,000 17’ - 20’ 36 lbs. DT DR130-PFS2 LP 120,000 21’ - 24’ 45 lbs. DT DR160-PFS2 LP 145,000 24’ - 28’ 54 lbs. DT THET5 Thermostat for Dry Environments...................... DT TH115 Thermostat for Wet Environments...................... DT DRCS Hanging Chain Set with Hooks for One Heater.. * Shipping Weights are Higher Due to Packaging.

Net Ea. $ 445.00 545.00 545.00 639.00 639.00 745.00 869.00 445.00 545.00 545.00 639.00 639.00 745.00 869.00 37.35 93.45 17.00

Electric Infrared Heaters Short Wave Electric Infrared Heaters. Unique design produces heat and visible light energy. Ideal for heating equipment or people, warehouses, workstations, equipment rooms. Lower mounting height requirements than other infrared heaters. Compact construction. ETL rated for indoor or outdoor use. Black, powder-coated aluminized steel housings (stainless also available). Clear quartz lamps are standard but glare reducing lamps are an added option. Single phase 120 or 240 volt units are shown, but 208, 480 and 575 volt options are also available. Not designed for wet environments.

Electric Infrared Heaters Part No. BTU Volts Watts Amps Length Wt. DT SW24B1A16W 5,460 120V 1600 13.3 21” 15 lbs. DT SW24B1C16W 5,460 240V 1600 6.7 21” 15 lbs. DT SW33B1C25W 8,530 240V 2500 10.4 22” 19 lbs. DT SW24B2C16W 10,920 240V 3200 13.3 22” 20 lbs. DT SW33B2C25W 17,060 240V 5000 20.8 26” 26 lbs. DT TH1A66 Thermostat, 120-277V......................................................

Visit Our Office in Omaha, Nebraska!

Net Ea. $ 307.10 307.10 384.90 438.40 605.00 49.00

13808 Industrial Road Omaha, NE 68137 1-800-228-9666 • 1-402-333-1444 FAX: 1-402-333-5546

e-mail: dultmeier@dultmeier.com website: dultmeier.com

Visit Our Office in Davenport, Iowa!

DULTMEIER SALES • OMAHA, NE

(800) 228-9666

601 West 76th St. Davenport, IA 52806 1-800-553-6975 • 1-563-386-0930 FAX: 1-563-386-5448

www.dultmeier.com

• DAVENPORT, IA

(800) 553-6975

E1040


430

Portable Infrared & Oil Fired Heaters Portable Infrared Heaters

FREE FACTORY FREIGHT ON ALL MTM HEATERS (Except for Liftgate Delivery)

Portable Infrared Heaters are designed for a variety of heating applications including warehouses, construction sites, farm and ranch, etc.

FL115 Portable Infrared Heaters

Specifications: • Rated to 115,000 BTU’s • Can Operate on Kerosene, #1 Diesel, #2 Diesel or Jet Fuel • Gas Tank Capacity: 11 Gallons, 13 Hour Run Time • Power Supply: 120 Volt, 1 Phase, 60 hz, 2.15 Amps • CSA Rated • Dimensions: 36” D x 14” W x 25” H

Features: Direct heat flow by radiation with no air movement • Low noise level • Built in oil burner • Electronic flame control • Stainless steel cone • Shockproof polyethylene fuel tank with manual drain • 12” reinforced plastic wheels • Floor protection shield • Optional thermostat with 30’ cord for +20° F. to +140° F. D

FL115 487101 Thermostat

F155 Heater BTU Fuel Part No. Rating Tank Wt. Net Ea. MV FL115 115,000 11 Gallon 92 lbs. CALL MV 487101 Thermostat............................... CALL

F155 Portable Infrared Heater

Specifications: • Rated to 154,000 BTU’s • Can Operate on Kerosene, #1 Diesel, #2 Diesel or Jet Fuel • Gas Tank Capacity: 17 Gallons, 16 Hour Run Time • Power Supply: 120 Volt, 1 Phase, 60 hz, 4.1 Amps • CSA Rated • Dimensions: 59” D x 29” W x 42” H

Features: Direct heat flow by radiation with no air movement • Low noise level • Built in oil burner • Electronic flame control • 1’ Power cord • Stainless steel combustion chamber • Shock-proof polyethylene fuel tank with manual drain • Oil filter • 12” reinforced plastic wheels • Floor protection shield • Optional thermostat with 30’ cord for +20° F. to +140° F.

D

F155

487101 Thermostat

F155 Heater BTU Fuel Part No. Rating Tank Wt. Net Ea. MV F155 154,000 17 Gallon 161 lbs. CALL MV 487101 Thermostat............................... CALL

Portable Indirect Heaters - Oil Fired Oil-Fired Indirect Heaters are ideal for use in construction, farm and industry. Delivers reliable heat without exposed flame. For open, well-ventilated areas or can be vented for indoor use. Can operate on Kerosene, #1 Diesel, #2 Diesel or Jet Fuel. Features: Stainless steel combustion changer with 4-pass heat exchanger technology • 90% Efficiency, most efficient in the industry • Electronic flame control unit • Overheat thermostat • Fuel tank with drain plug • Combustion air pressure safety switch • 1 ft. power cord • 10” pneumatic wheels • 120 Volt, 1 Phase, 60 Hz. • 6” Flue stack • Up to 14 hour run time per tank. BLH100 Heater is rated to 112,000 BTU input. Dimensions are 50” long x 20” wide x 30” high. BLH200 Heater is rated to 205,000 BTU input. Dimensions are 57” long x 22” wide x 37” high.

MV BLH Portable Indirect Heaters

D

BLH300 Heater is rated to 294,000 BTU input. Dimensions are 69” long x 28” wide x 42” high.

F155 Heater BTU Fuel Part No. Rating Tank Wt. Net Ea. MV BLH100 112,000 11 Gallon 130 lbs. CALL MV BLH200 205,000 17 Gallon 210 lbs. CALL MV BLH300 294,000 27 Gallon 300 lbs. CALL MV 487101 Thermostat............................... CALL DULTMEIER SALES • OMAHA, NE

487101 Thermostat

(800) 228-9666

www.dultmeier.com

• DAVENPORT, IA

(800) 553-6975

E1112


Heaters

431

Stock Tank Heater

Immersion Heaters

M66B Automatic Gas Tank Heater for LP-Gas. • AGA listed automatic safety controls • Easy and safe to light • Stays lit when others fail • Adjustable brackets fit steel, wood or concrete stock tanks • 12,470 BTU every hour if needed • No gaskets to melt or leak • No castings to crack or break • Heavy steel casing that will last • Control and burner assembly easily removed for servicing • Field tested and proven in all types of weather • Warm air around lowered control valve eliminates freeze-ups and sticky valves.

— Commercial / Industrial Grade —

AUTOMATIC LP GAS No. M66B Width Height *Length 8-1/2" 35" 20" * Casing & Heat Chamber

Immersed Length

D

MPT Threads

D

Part No. Description TR 66B Automatic Gas Tank Heater

Wt. 50 lbs.

Screw Plug Style

Screw Plug Immersion Heaters are ideal for direct heating of solutions and oils in holding tanks. Sheath materials are available in Steel, Copper and Incoloy. All heaters are standard with thermowells for remote thermostats if required. (Priced with or without built-in thermostats). Standard with (NEMA 1) terminal enclosures with knockouts for ease of wiring. (NEMA 4 enclosures for flammable materials or wet environments also available).

Net Ea. $ 411.10

Robertshaw Control for Stock Tank Heaters 110S Robertshaw Unitrol is the finest FULLY AUTOMATIC temperature control for stock tank heaters • Automatically keeps water in stock tanks at the ideal temperature all winter • Provides accurate automatic control of water temperature without outside electrical connection • Contains thermomagnetic type of automatic pilot to insure positive shut-off of all gas in instances of pilot D outage • For LP Gas.

Voltage ratings are single phase, 120 volt or 120/240 volt as shown. (3-Phase available in some models). UL® and CSA rated. All models are standard with MPT threads to fit existing FPT couplings or flanges on existing tanks.

HEATER CONSTRUCTION: Copper, Sheath, Brass Plug: Best Choice for Clean Water or liquids not corrosive to copper. Rated to 350° F.

Part No.

Steel Sheath, Steel Plug:

Best choice for Lightweight oils, degreasing solutions and other non- corrosive solutions. Rated to 750° F.

Net Ea.

TR 110SS Robertshaw Unitrol

$ 196.00

Incoloy® Sheath, 304SS Plug: Best choice for caustic solutions,

Livestock Water Heater Control

A Universal Heater with a Completely Automatic Control

MPT Part No. Plug Sheath Watts Volts JS 6BC-S2 1" Incoloy 1000 120 JS 16BC-S2 1" Steel 1000 120 JS 18BC-S2 1" Incoloy 2000 120 JS 4BE-S2 1-1/4" Copper 1000 120/240 JS 8BE-S2 1-1/4" Copper 2000 120/240 JS 12BE-S2 1-1/4" Steel 1000 120/240 JS 71BG-S2 2" Copper 3000 120/240 JS 77BG-S2 2" Steel 2000 120/240

D

Trojan Model AG82 lowers your heating costs! No more gas than necessary to keep the trough ice-free. Has a rubber hose connector that allows you to position this unit in your waterer to get the right amount of heat for the hog trough and cattle trough in relation to animals drinking. Features: Adjustable automatic thermostat • Safe lighting fully protected pilot • Sturdy construction and compact size • Wide base that prevents tipovers • 4060 BTU every hour if needed • For LP Gas. Part No.

AUTOMATIC GAS BURNER

Wt.

Net Ea.

TR AG82 With Automatic Control............. 4 lbs.

Electric Space Heater Part No.

TR A2520

degreasing solutions, process water & water with cleaning agents. Rated to 1600° F.

$ 339.90

Overall Immersed Length Length Net Ea. 10-1/2" 6-5/8" $ 318.20 20-5/8" 16-3/4" 328.30 16-3/8" 12-1/2" 298.00 8-1/4" 4-3/8" 338.90 12-7/16" 8-1/2" 345.50 16-11/16" 12-3/4" 356.10 15-7/16" 11-1/8" 440.40 21-13/16" 17-1/2" 454.00

Replacement Thermocouple Kits Dayton design incorporates a complete stainless steel tip for long life and greater unit strength. Each thermocouple is individually packed with 5 adaptors to facilitate replacing most makes and styles in the field on 30 millivolt systems. Simple instructions insure quick, easy installation.

D

Part No. Length Net Ea. GN 2E166 18”   $ 13.60 GN 2E140 24” 16.20 GN 2E142 35” 16.15

D

Net Ea. $ 25.00

Features: For Number 70 Hog Waterers, pipeline waterers or any enclosed watering unit • Adjustable, automatic thermostat • 450-watt tubular heat element • High quality sturdy construction DULTMEIER SALES • OMAHA, NE

(800) 228-9666

www.dultmeier.com

• DAVENPORT, IA

(800) 553-6975

E0524


432

PowerBlanket Heaters • Coupler Locks Heaters

Industrial heating solutions for drums, Pails, totes, pipe, valves, tanks, hose and cylinders. Cold weather protection, designed for thaw or freeze prevention and viscosity control. Available with or without thermostatic controllers. Provides uniform direction heating for temperature sensitive materials and equipment. Features: Easy-to-Install and remove • Insulated, full-wrap design • Can be used on both metals and plastics • Uniform heating means no hot or cold spots • Safely heat without scorching • Various temperature settings • Low energy consumption • UL/CSA/ETL compliant • Tough design is water and weather-resistant. Drum/Pail Models with thermostats are rated to 160° F. Models shown without thermostats are designed for fixed 100° F. output. Pipe/Valve heater blankets are rated to -10° F. and do not include thermostats.

• INSULATE IT

• HEAT IT

• WRAP IT

• THAW IT

• PROTECT IT

• CURE IT

All Power Blankets are rated for 120 Volt, AC and come with 6’ power cords. (Curing, thawing and snowmelt blankets are also available, pricing on request).

D D

BH55PRO

BH30RR

TH275 Tote Heater

Drum/Pail/Tote Blanket Heaters 120 Volt Part No. Container Size Thermostat Amp Rating Wt. Net Ea. PE BH05RR 5 Gallon No 1.00 4 lbs. $ 287.90 PE BH05PRO 5 Gallon Yes 1.33 6 lbs. 493.90 PE BH15RR 15 Gallon No 2.67 7 lbs. 385.90 PE BH15PRO 15 Gallon Yes 3.33 9 lbs. 652.00 PE BH30RR 30 Gallon No 4.67 9 lbs. 463.60 PE BH30PRO 30 Gallon Yes 6.00 11 lbs. 747.00 PE BH55RR 55 Gallon No 6.67 11 lbs. 545.00 PE BH55PRO 55 Gallon Yes 8.00 13 lbs. 793.00 PE TH275 275 Gallon Yes 12.00 41 lbs. 1384.00 PE TH330 330 Gallon Yes 12.00 45 lbs. 1605.00

Pipe/Valve Blanket Heaters 120 Volt Part No. Pipe Size Length Amp Rating Net Ea. PE PH040505 4” - 5” 5” 2.67 $ 489.90 PE PH040510 4” - 5” 10” 6.0 748.00 PE PH040520 4” - 5” 20” 12.0 1177.00 PE PH060605 6” 5” 4.67 561.00 PE PH060610 6” 10” 9.17 859.00 PE PH060620 6” 20” 16.0 1273.00 PE PH080805 8” 5” 6.0 632.00 PE PH080810 8” 10” 12.0 1071.00 PE PH080820 8” 20” 24.0 1697.00 Note: Blankets for 10” & 12” Pipe Also Available on Request.

PowerBlanket “Lite” Heaters Same unique design as the standard PowerBlanket Heaters above but lower wattage, lower preset temperatures and no thermostats allow the “Lite” models to be more competitive when applications allow. 2’ power cords are standard. All models require 120 volt power supply. PowerBlanket Lite Bucket & Drum Heaters are designed to heat materials to a preset of 125° F. (+or - 10° F.) PowerBlanket Lite Gas Cylinder Heaters are designed to heat to a preset of 90° F. (+or - 5° F.) PowerBlanket “Lite” Heaters Part No. PE PBL05 PE PBL15 PE PBL30 PE PBL55F PE PBL20 PE PBL100 PE PBL420

Container Size 5 Gallon Bucket 15 Gallon Pail 30 Gallon Drum 55 Gallon Drum 20 Lb. Cylinder 100 Lb. Cylinder 420 Lb. Cylinder

Electrical Rating 120 Watt/1.0 Amp 180 Watt/1.51 Amp 280 Watt/2.33 Amp 400 Watt/3.33 Amp 120 Watt/1.0 Amp 280 Watt/2.33 Amp 400 Watt/3.33 Amp

Wt. 1-1/2 lbs. 2-3/4 lbs. 4 lbs. 10 lbs. 1-3/4 lbs. 4 lbs. 6-1/2 lbs.

DULTMEIER SALES • OMAHA, NE

Net Ea. $ 89.90 99.00 140.40 324.30 98.00 154.60 269.70

(800) 228-9666

D

D

PBL15 Pail Heater •

www.dultmeier.com

PBL30 Drum Heater • DAVENPORT, IA

(800) 553-6975

D

PBL420 Cylinder Heater

E0959


Couplers • Hitches • Drum Wrenches

433

Quick-Lock Couplers

TRAILER SECURITY

A-Frame 990P3N

970P

Receiver Pins

D

D

D

370DAT & 371DAT

Receiver Pins with clips.Tapered pins install easily and fit most receivers. Hardened steel construction. Available in either 1/2" or 5/8" diameters. No. 1495DAT includes built-in pivot lock, no clips needed.

Quick-Lock Coupler is precision die formed, easily and quickly unlocked by light thumb pressure on the safety lever, snaps shut in an instant, and cannot unlock by itself.

1495DAT

Part No.

D

Description

Housing Width For Part No. I.D. O.D. Ball Size DN 960P 2-9/16" 2-13/16" 1-7/8" DN 970P 3" 3-1/4" 1-7/8" MR 2836AT 3" 3-1/4" 2" DN 990P3N 50° Angle 2"

Net Ea.

MR 370DAT Class II, 1/2" Receiver Pin with Clip............. $ 1.97 MR 371DAT Class III & IV, 5/8" Receiver Pin with Clip..... 2.17 MR 1495DAT Class III & IV, 5/8" Receiver Pin with pivot lock 3.39

ROLL-A HITCH

Receiver Locks 2866DAT

Receiver Locks have a two-piece, snap-on design. The lock body snaps onto the pin for fast and trouble-free use. Vinyl weather guard is standard. Available in 1/2" or 5/8" diameters. Adjustable.

D

D

374DAT Part No.

Description

Net Ea.

MR 374DAT Class II, 1/2" Receiver Lock..................... $ 8.50 MR 2866DAT Class III & IV, 1/2” & 5/8" Receiver Lock... 12.10

Three-Way Ball Hitch Tri-Ball Hitch features solid steel construction with black finish. No longer necessary to keep different coupler balls on hand and change when trailers are different. Trailer capacity is 2,000 lbs. on 1-7/8” ball, 6,000 lbs. on 2” ball and 10,000 lbs. on 2-5/16” ball.

SAE For Trailer Class Gross Wt. Net Ea. 1 To 2000 lbs. $ 13.45 1 To 2000 lbs. 13.70 2 2000 to 3500 lbs. 18.45 3 To 5000 lbs. 43.00

by Convert-A-Ball For 2" Open End Receivers Telescoping Cushioned Hitch extends 7" beyond t ow i n g p o s i t i o n a n d swivels 6" left or right of centerline for easy hookups anywhere. Just pull forward to lock in center and then back up to lock in towing position. Maximum trailer weight of 10,000 lbs. Maximum tongue weight of 1,000 lbs. Load rated per SAE J684 V5. Receiver pin not included. Ship weight is 35 lbs.

D

Hookup Zone Amounts Vary *Due to Tongue Type **Due to Spare Tire D

10" - 12" * D

6" - 7" **

Part No.

Description

RC 80425

Tri-Ball Hitch ................

Wt.

Part No.

Net Ea.

CG LO

10 Lbs. $ 49.45

Roll-A-Hitch

Wt.

Net Ea.

35 lbs.

$ 216.20

Drum & Pail Wrenches We now have our Catalogs as well as Parts Schematics online!

WR100

Drum and Pail Wrenches easily open 5 gallon pails or 15, 30 & 55 gallon drums. Constructed of nylon, non-sparking bronze or aluminum.

169 WR63 WR70

Part No. BI WR63 BI WR70 BI WR100 NS 169 EV DPW

www.dultmeier.com

DULTMEIER SALES • OMAHA, NE

(800) 228-9666

www.dultmeier.com

DPW

Container Construction Length 63mm Pail Lids Nylon 10” 70mm Pail Lids Nylon 10” Drums Nylon 10” Drums Aluminum 12-1/2” Drums Bronze 11-3/4” • DAVENPORT, IA

(800) 553-6975

Net Ea. $ 8.53 8.53 8.53 10.05 51.70

E0529


Hitches

434

Standard Draw Bars

D

4” Drop

21344

D

2” Drop

21343

Standard Draw Bars for 2" x 2" receivers. Available in Short or Long Drop models. Construction is painted steel. Rated to 5,000, 6,000 and 12,000 lb. gross trailer weight and 500 lb. tongue weight. Hitch ball hole D 21330 size is 1".

Part No.

Cushioned Ball Mounts for 2" Receivers Which are Open End or at least 4-1/8" Deep

Acts as a shock absorber • Protects the towing vehicle's drive line, hitch assembly and trailer contents • Easy to install • Proven effective in reducing bounce and rhythmic vibrations • For use with underframe receiver hitch with a 2" square socket • Class 4, V-5 Safe! NOTE: Be sure the hitch bar receiver tube has an open end. If not, be sure the tube is more than 4-1/8" deep. May be used D as a drop or rise. Shanks are 2" x 2" tube with 1/4" wall thickness. AMSC2 Shank hole is 1" diameter. Hitch pin hole receives a standard hitch pin (not included). Maximum trailer weight of 10,000 lb. Maximum tongue weight of 2,000 lbs. Rated Class 4. Rated V-5. Meets SAE Standard J-684. Part No.

Description

CG AMSC2 CG AMSC4 CG AMSC6

2" Drop (or rise) $ 58.55 4" Drop (or rise) 63.15 6" Drop (or rise) 65.40

AMSC4 D

“The Original” Available in Chrome Plated or Stainless Steel

D

Net Ea. AMSC6

Chrome-Plated

Shank Part No. Dia. Length CG 902B 1" 1-3/4" CG 906B 1" 1-3/4"

Stainless Steel

Balls Included Capacity 1-7/8", 2" & 2-5/16" - 2" & 2-5/16" -

6391C: 2" Coupler Ball. 6000 Lb. Capacity, SAE Class 3. Chrome Plated.

No. BA-1

Part No.

AM-CC-2

MR 2806D MR 2807D

3/4" 1"

1-7/8" & 2" 1-7/8" & 2"

ACCESSORIES

Drop or Riser.................................. $ 105.70 Ball Mount Adapter......................... 29.05 Clevis Pin Adapter.......................... 42.40 AM Series....................................... 69.95 DULTMEIER SALES • OMAHA, NE

D

Quick Hitches are safe. An operator can engage and secure implement from tractor seat. Reduces chance of strained back, smashed fingers or other injuries associated with implement hookup. Models available to fit most Category 1, 2 & 3 tractors. Constructed of Heavy-duty steel.

Max Part No. Description HP Width Wt. Net Ea. SJ HF141107 Category 2 Heavy Duty Quick Hitch.... 150 32" 160 lbs. $ 377.80 SJ HF141103 Category 3 Standard Quick Hitch........ 225 38" 182 lbs. 463.10 SJ HF141106 Category 3 Narrow Quick Hitch........... 225 32" 176 lbs. 457.60 FOB - Golden, Colorado

Net Ea.

(800) 228-9666

Net Ea.

$ 14.10 18.95

For Fast, Easy Attachment & Release of 3-Pt. Implements

AM-CC-2: May be used as ball mounts but are designed as AG clevis hitches. Shanks are 2" x 2" tube with 1/4" wall thickness. Shank hole diameter is 1". Hitch pin hole receives a standard hitch pin (not included). Rated class 4. Rated V-5. Meets SAE standard J-684. For use with open-end receivers. CUSHIONED. The AMCC-2 can also be used for a pintle ring, with a maximum trailer weight of 10,000 lbs. and maximum tongue weight of 2,000 lbs.

CG AM-AC-1 CG BA-1 CG CA-1 CG AM-CC-2

6393C: 2-5/16" Coupler Ball.6000 Lb. Capacity. SAE Class 3. Unpolished Chrome.

Quick Hitches

CLEVIS PIN ADAPTER: Designed as an agricultural clevis hitch and may be used as a ball mount. Shank hole is 1" diameter. May be used with AM-AC-1 with 3-1/2" x 3/4, 16-grade 5 bolts.

Part No.

D

Shank Balls Diameter Included

No. AM-CC-2

D

Net Ea. $ 85.00 65.70

Solid Coupler Balls

No. CA-1

CA-1

Capacity Net Ea. 10,000 lbs. $ 31.30 10,000 lbs. 36.15

From Master Lock! Now you can easily change from one ball diameter to another without tools. Chrome-plated construction. All sets come with shank and balls. Available in 3 different package sets as shown below. Len