Issuu on Google+

   

化妆品包装物理性能测试 09032601ace 本文针对不同网站要求,提供了全文、少于 2000 字节和低于 1000 字节缩减版本。请根据实际情况使用。 英文翻译中提供了简短的摘要,请在对摘要字数有限制的网站中使用。 在推广本文时,请在个人的网络管理档案中标记本文编号。

英语全文: 类型

产品软文

传送日期

090326

编号:09032601e

字数

3590 字节,含空格

语言

英文

传送网站数

题目

Physical Index Testing of Cosmetic Packaging Materials

摘要

The mechanical performance of cosmetic package plays an important role in the packaging & processing, transportation and shelf life. Its quality directly affects cosmetic safety during distribution. The testing items include: tensile strength & elongation rate, peeling strength of laminated films, heat seal strength, sealing and leakage, impact resistance and surface smoothness, etc.

关键字

tensile strength & elongation rate, peeling strength of laminated films, heat seal strength, sealing and leakage, impact resistance and surface smoothness

正文

The mechanical performance of cosmetic package plays an important role in the packaging & processing, transportation and shelf life. Its quality directly affects cosmetic safety during distribution. The testing items include: tensile strength & elongation rate, peeling strength of laminated films, heat seal strength, sealing and leakage, impact resistance and surface smoothness, etc. 1. Tensile Strength and Elongation, Peeling Strength, Heat Seal Strength and Tearing Performance Tensile strength is the maximum force before material breakage so as to resolve the problem of inferior mechanical strength and the corresponding package breakage under external forces. Peeling strength is also called composite strength or compound strength; it is the testing of the bond strength between the layers of the laminated film. If the bond strength is too low, separation of layers and leakage are easily to appear during application. Heat seal strength is the testing of the enclosure strength. During product storage and transportation, the heat seal place would break and the content would leak if the heal seal strength is too low. In order to test the above-mentioned indexes, tensile tester is a necessity. Take Drick DRK101A Tensile Tester as an example. Prepare specimens according to different standards, clamp the specimen in between the clamps of the tensile tester and set the testing speed at 300mm/min (for tensile testing, 500mm/min is also available). Start the tester and the testing results would be calculated. DRK101A Tensile Tester is equipped with function menu, through which, standard testing can be accomplished by choosing different testing items. Besides, for heat seal strength testing, Heat Seal Tester is needed for the specimen preparation. This instrument is a routine instrument in cosmetic packaging labs. 2. Impact Resistance Testing A good status of the impact resistance performance will avoid the packaging breakage due to low ductility; and effectively avoid goods damage of low impact resistance and low falling resistance during circulation. Usually, falling dart impact tester is applicable. Take Drick DRK135 Falling Dart Impact Tester as an example, it determines the impact resistance of plastic film by free-falling dart. This is a commonly accepted testing method by cosmetic producers and relevant packaging manufacturers. It’s to test whether the required energy can damage the film specimen under the impact of the free falling dart. If 50% of the specimens damage under regulated condition, estimate the required energy. 3. Coefficient of Friction of Materials Coefficient of friction is the smoothness performance of material surface, an important index evaluating the inner and external smoothness of materials. This index can guarantee good open easiness and smooth assembly process. The coefficient of friction tester is made under ASTM 1894. Drick DRK127 is taken as an example. Firstly, prepare specimen. Put the testing side of one specimen upward on the testing platform neatly. The


specimen should be parallel to the length direction of the testing platform. Secondly, put other specimen with the testing area of 63mmX63mm downwards and pack the sled. Fasten the specimen with adhesive tape on its front and up parts. Thirdly, place the sled with specimen on the center of the first specimen. Make the testing direction and sled direction parallel and no force for the strength measurement system. Fourth, start the instrument, the two specimen moves relatively so as to obtain kinetic and static coefficient of friction. For more information, contact Drick Kiara. Email: kiara-drick@hotmail.com SKYPE: kiaraxu910 Tel: +86531-66689796. 可替换关键 字

关键字

传送网站数

1 2 3 4 5

注意事项

本信息发布后不需刷新。

三、英语缩减版 本文在文章长度对大限制为 2000 字节的网站使用。 类型

产品软文

传送日期

090326

编号:09032601e

字数

1891 字节,含空格

语言

英文

传送网站数

题目

Physical Index Testing of Cosmetic Packaging Materials

摘要

The mechanical performance of cosmetic package plays an important role in the packaging & processing, transportation and shelf life. Its quality directly affects cosmetic safety during distribution. The testing items include: tensile strength & elongation rate, peeling strength of laminated films, heat seal strength, sealing and leakage, impact resistance and surface smoothness, etc.

关键字

tensile strength & elongation rate, peeling strength of laminated films, heat seal strength, sealing and leakage, impact resistance and surface smoothness

正文

The testing items include: tensile strength & elongation rate, peeling strength of laminated films, heat seal strength, sealing and leakage, impact resistance and surface smoothness, etc. 1. Tensile Strength and Elongation, Peeling Strength, Heat Seal Strength and Tearing Performance Tensile strength is the maximum force before material breakage so as to resolve the problem of inferior mechanical strength and the corresponding package breakage under external forces. Peeling strength is also called composite strength or compound strength; it is the testing of the bond strength between the layers of the laminated film. If the bond strength is too low, separation of layers and leakage are easily to appear during application. Heat seal strength is the testing of the enclosure strength. During product storage and transportation, the heat seal place would break and the content would leak if the heal seal strength is too low. In order to test the above-mentioned indexes, tensile tester is a necessity. Take Drick DRK101A Tensile Tester is an example. 2. Impact Resistance Testing Take Drick DRK135 Falling Dart Impact Tester as an example, it determines the impact resistance of plastic film by free-falling dart. This is a commonly accepted testing method by cosmetic producers and relevant packaging manufacturers. It’s to test whether the required energy can damage the film specimen under the impact of the free falling dart. If 50% of the specimens damage under regulated condition, estimate the required energy. 3. Coefficient of Friction of Materials Coefficient of friction is the smoothness performance of material surface, an important index evaluating the inner and external smoothness of materials. This index can guarantee good open easiness and smooth assembly process. The coefficient of friction tester is made under ASTM 1894. Drick DRK127 is an example.


For more information, contact Drick Kiara. Email: kiara-drick@hotmail.com SKYPE: kiaraxu910 Tel: +86531-66689796. www.drktest.com 可替换关键 字

关键字

传送网站数

1 2 3 4 5

注意事项

本信息发布后不需刷新。

四、英语简短版 本文在文章要求 1000 字节以下的网站使用。 类型

产品软文

传送日期

090326

编号:09032601e

字数

696 字节,含空格

语言

英文

传送网站数

题目

Physical Index Testing of Cosmetic Packaging Materials

摘要

The physical testing items include: tensile strength & elongation rate, peeling strength of laminated films, heat seal strength, sealing and leakage, impact resistance and surface smoothness, etc.

关键字

Tensile strength & elongation rate, peeling strength of laminated films, heat seal strength, sealing and leakage, impact resistance and surface smoothness

正文

The mechanical performance of cosmetic package plays an important role in the packaging & processing, transportation and shelf life. Its quality directly affects cosmetic safety during distribution. The testing items include: tensile strength & elongation rate, peeling strength of laminated films, heat seal strength, sealing and leakage, impact resistance and surface smoothness, etc. 1. Tensile Strength and Elongation, Peeling Strength, Heat Seal Strength and Tearing Performance.Drick DRK101A Tensile Tester is an example. 2. Impact Resistance Testing. Drick DRK135 Falling Dart Impact Tester is an example. 3. Coefficient of Friction of Materials.Drick DRK127 is an example. For more information, contact Drick Kiara. Email: kiara-drick@hotmail.com SKYPE: kiaraxu910 Tel: +86531-66689796. www.drktest.com

可替换关键 字

关键字 1 2 3 4 5

注意事项

本信息发布后不需刷新。

传送网站数


Physical Index Testing of Cosmetic Packaging Materials