Issuu on Google+

SINGING_Working_2010_Sestava 1 5.3.2010 1:01 Strรกnka 1

CATALOGUE 2010 EN

SINGING ROCK WORKING RESCUE INTERVENTION


SINGING_Working_2010_Sestava 1 5.3.2010 1:01 Stránka 2

SINGING ROCK WORKING RESCUE INTERVENTION Equipment for work at height, rope access and rescue Professional Protective Equipment SINGING ROCK has everything you need for your Personal Protective Equipment to prevent falling (PPE) and for permanent fall protection. The range of equipment available includes harnesses, ropes, hardware, abseiling devices, safety equipment for heights, anchor points, life lines and sets for typical work situations. All of the high-performance and innovative products are developed and produced in Czech Republic. The products are certified and fully comply with the international industrial safety standards. Our products are innovative, modern and easy to use, with great strength and with maximum comfort...

This catalogue is intended to help you select the most suitable working method for your particular work enviroment. Photo This page: Joe Gough • Photo cover: Petr Pavlíček

content

2

4

30

66

78

work systems

working & rescue

intervention

service and tables


SINGING_Working_2010_Sestava 1 5.3.2010 1:01 Stránka 3

SINGING ROCK HARNESS - NEW DIMENSION Attachment points for lowering

Narrowed padding and webbing around the neck enhance comfort during work.

Elastic strap for holding shoulder webbing. Slots for carabiners

Name tag + identification Positioning D rings

Sleep (parking position)

Attachment points according EN 361. Steel D-rings with a bearing capacity of 15 kN.

Positioning points are placed in symmetrically according to EN 358, tested for 15 kN strength. Light alloy D-rings are movable into so-called „parking position“, thus avoiding undesired catching during work.

Work

EASY LOCK buckle with a captive bar matches strict American standards (ANSI, CSA). Its minimum strength is 17.2 kN. No webbing slippage in a buckle. Its construction ensures longtime operation and efficiency (easy releasing and fastening even when dirty and tough webbing). Corrosion resistance is tested by spraying in a salty chamber for a period of 48 hours.

HYPNOS key lock carabiner K0007 for connection of chest straps with waist belt.

Front and back attachment points meet the requirements of EN813.

On the back: slots in the waist belt webbing provide secure points from which to hang heavy equipment (e.g. power saws, drills etc.) as well as slots for the Porter plastic carabiner.

Additional loops with a bearing capacity of 5 kg offer additional space for the gear and better gear management.

Braided gear loops with a bearing capacity of 10 kg provide enough space for 10 pieces of HMS carabiners.

Anatomic leg loops padding

3


SINGING_Working_2010_Sestava 1 5.3.2010 1:01 Stránka 4

permanent innovation

Ein, zwei, dry permanent dry Selected SINGING ROPES are produced with a DuPontTM TEFLON® fabric protector license. Ropes protected by a TEFLON® layer have extraordinary water and abrasion resistance. The TEFLON® layer also effectively prevents the intrusion of dust particles into the rope structure and thus increases its lifespan.

Rock&Lock

SpecialTEFLON

®®

The rope is protected with a very stable organic resin based on organic fluoridated polymers. The resulting protective film reduces the surface energy of the textile material so much that it not only repels water, but fatty substances as well. It also prevents the penetration of dust particles into the internal structure of the rope, protecting the inside of the rope from damage. The TEFLON® layer gives our ropes superior properties for use, especially in damp or abrasive environments where ordinary ropes are vulnerable to serious damage. So, dynamic ropes with Ein, zwei, dry finishing have higher safety and longer life than ever before.

BMI the adjusting system Revolutionary size adjusting system by SINGING ROCK. You can easily adjust free end of your waistbelt padding and fix it in the right position and minimize so called “sticking out” of padding incl. the first gear loop in the line. Suitable for situation as losing or putting on your weight, putting more dresses or changing of your climbing seasons. The best position is when buckle lies on padding and BMI system doesn’t allow gear loops to get out.

patented smart buckle system Easy to lock and open: Only small effort of your fingers is needed to lock and open. • Fast lace-through: Make the loop, put it through the buckle frame, hook the loop on cross bar and tighten. It is easy as that. • Smart function: Rock&Lock allows you to put on your harness very quickly • Double safety: Webbing cannot slip through Rock&Lock due to safety loop at the end. Spontaneous opening of Rock&Lock is virtually impossible. • Lightweight and extra strong. • Excellent function in all-season conditions: Function guaranteed even when webbing is wet or frozen.

SPEED buckle 1 second buckle The SINGING ROCK SPEED is the side quick release buckle. • Easy operation • Quick release • Durable • 2-finger safety release • Adjustable • Compact and handy • Strap width up to 45 mm • Black coated

Only small effort of your fingers is needed to lock and open.

1. Make the loop and put it through the buckle frame.

2. Hook the loop on cross bar.

Easy-lock buckle 3. Tighten. It is easy as that.

4

Smooth adjusting Unique buckle with a sliding captive bar matches strict American standards (ANSI, CSA). Its minimum strength is 17.2 kN. No webbing slippage in a buckle. Its construction ensures longtime operation and efficiency (easy releasing and fastening even when dirty and tough webbing). Corrosion resistance is tested by spraying in a salty chamber for a period of 48 hours.


SINGING_Working_2010_Sestava 1 5.3.2010 1:01 Str谩nka 5

ThERMOTRANSFER Key-lock for easy manipulation Key lock is an extremly simple and ingenious locking system that solves the problems associated with the traditional design of carabiners. It eliminates any risk of ropes or tapes becoming entangled in the lever or in the carabiner shell when it is being connected or released. Neither the lever, which is completely cylindrical, nor the shell has any sharp edges. Ropes and slings do not, therefore, come into contact with any cutting edges.

Route 44

Hot forging The latest technology in manufacturing carabiners, where the aluminum alloy is heated to reach very plastic state when being forged, in other words when it takes the final shape. This allows the metal to be formed more easily and to be moved to the areas where it is needed and removed from the areas where it is not needed. In comparison with cold forged binners the hot forged binners are lighter, more resistant and trustily.

experience the touch of the future Route 44 is unique technology invented and patented by Singing Rock. It opens new horizons for braiding of climbing and static ropes. Route 44 technology allows blending of properties that were considered impossible before. Rope braided by using Route 44 technology is more compact, softer and above all it is more durable than conventional rope. All that is achieved by making no compromises in using correct sheath thickness, which is round-braided by 44 carriers. These features combine to give you better rope.

Thermotransfer end marking of Singing Rock ropes. Thermo-transfer etiquette is the special plastic etiquette applied to the rope sheath by the means of heat and pressure. This marking id durable and does not create any broad forms on ends of ropes which can stack anywhere very easy e.g. pulling down rope from rappel station and so on.

Ultras贸nico an excellent way of rope ending Our own special technology has been used for the ends of the rope. All SINGING ROCK ropes are ended by a unique technology ULTRASONIC. It means that the load-bearing core and the protective sheath are joined into a compact unit in the last 15 mm of the rope.

unique number identification identification of metal parts For better traceability and inspection recording the Singing Rock metal parts are marked with the unique number. Singing Rock metal parts marked with the unique number are in this catalogue indicated with text "unique number".

seam cover

MIDDLE MARKING

The Cover is made of high-durable transparent elastomer. It protects strength seam on the rope and allows its control and revision.

At half of the length, the rope is visibly marked by colour, which does not affect the core structure and its mechanical properties.

5


SINGING_Working_2010_Sestava 1 5.3.2010 1:01 Stránka 6

working

Work systems: Roof safety • Equipment is used on roofs or other flat surfaces where the user can stand comfortably. • Fineline is attached to a secure points and the worker is fixed to this line with e.g. LOCKER SLING and LOCKER. • Fullbody harness or sit harness may be used for restraint. If working place is too close to the corner of a roof, two systems may be needed to provide adequate safety – to prevent a fall from the side of the roof and prevent a fall over the end.

Photo: Vojtěch Watt Dvořák, SINGING ROCK archive

6


SINGING_Working_2010_Sestava 1 5.3.2010 1:01 Strรกnka 7

W1021WW20

fine line fine line 20

S9000BB50

GLOVES GRIPPY 3/4 GLOVES GRIPPY

gear bag 50 l black

W0032SY03 size ML W0032SY05 size XL

UNIT fully adjustable fall-arrest harness + D rings for positionings

K4241Z005

X0033RR00

oval steel connector

Work helmet PLASMA

with screw gate, key lock

W2000X120

W4100Y120

eye sling 30 kN sewed sling with eye, made of two layers of strength strap with wear indication

JOULE 120 W1012WB04

fall absorber 120 cm

SITE length 400 cm

7


SINGING_Working_2010_Sestava 1 5.3.2010 1:01 Stránka 8

working

Work systems: towers and rigging • Working on tall structures may involve fall arrest, work positioning, rope access and possibly evacuation. • If no stable safety system is present and the structure needs to be climbed repeatedly a flexible fall arrest line may be required • For climbing on frame construction of metal towers fall absorber may be essential. • Construction demands a full range of fall protection solutions to meet the needs of a dynamic workplace. That’s why workers turn to SINGING ROCK for expertise, superior quality products and continual systems innovation.

Photo: Vojtěch Watt Dvořák, SINGING ROCK archive

8


SINGING_Working_2010_Sestava 1 5.3.2010 1:01 Stránka 9

W0048BR

EX-TEN W0008BS00

support of waist belt to increase comfort

C0006BH

TOOL BAG

Grippy

hardware carrier and organizer

S9000BB50

K4241Z005

gear bag

oval steel connector

50 l black

with screw gate, key lock

W0041BR

PROFI WORKER standard full body harness – Easy-lock buckles X0033RR00

A0031BS00

Work helmet PLASMA

pocket-knife

W1010BS09

locker guided type fall arrester and work positioning device.

L026

CONTRA 10,5

W1015B020

static rope

locker sling connecting sling for connection of your harness and LOCKER (fall arrester). W4220WW00

W1012WB02

Site 200 cm + K370

W4250W155

REACTOR 155 EYE

REACTOR 2 shock absorber (only)

fall absorber integrated with lanyards

9


SINGING_Working_2010_Sestava 1 5.3.2010 1:01 Stránka 10

working

Work systems: overhead lines • Overhead line workers possibly use the widest range of fall arrest and positioning systems. • For various activities (climbing the leg, traversing the arms, positioning, descending) different equipment may be needed.

Photo: Vojtěch Watt Dvořák, SINGING ROCK archive

10


SINGING_Working_2010_Sestava 1 5.3.2010 1:01 Stránka 11

GLOVES GRIPPY 3/4 GLOVES GRIPPY S9000BB50

gear bag 50 l black

static 10,5 - 11

X0033RR00

W4240W085

Work helmet PLASMA

REACTOR 2 fall absorber integrated with lanyards

W0041BR

PROFI WORKER standard full body harness – Easy-lock buckles

W0010YB00

Franklin

K4081ZO

D STEEL CONNECTOR TRIPLE LOCK with triple lock gate, key lock, zinc plated

W2001B120

open sling 22 kN sewed sling 20 mm, 120 cm

A0031BS00

pocket-knife

C2150BY

JACOB six staves aider

K030

K6400BB

DOUBLE STOP

CAM CLEAN

descender with double locking and anti-panic system

hand and chest ascenders for safe and smooth ascent K6391BB

W1010BS09

LIFT right

locker guided type fall arrester and work positioning device

11


SINGING_Working_2010_Sestava 1 5.3.2010 1:01 Stránka 12

working

Work systems: wind turbins • Some wind –power plants do not contain stable fall protection anchors. The metal and textile anchor slings and lanyards allow safe connection to robust elements. • Wind –power plants may require a combination of ascending, descending, fall protection methods, positioning.

Photo: SINGING ROCK archive

12


SINGING_Working_2010_Sestava 1 5.3.2010 1:01 Strรกnka 13

C0046B120

C0007BB

Expedition bag

VERVE

tarp duffle 120 litres

kevlar and nomex K4241ZO07

X0033RR00

STEEL OVAL CONNECTOr TRIPLELOCK

Work helmet PLASMA

K0007EE00

HYPNOS SCREW key lock

W0044BR03

EXPERT II standard full body harness

W1024BX00

W2015X120

FOOTER II

sling lanyard 22 kN

ascender webbing without maillon

sewed sling, made of two layers of strength strap with wear indication

ACC POWER ASCENDER

W2283X180 W410Y120

STEEL LANYARD "I"

JOULE 120

180 cm

fall absorber 120 cm

W1010BS09

locker guided type fall arrester and work positioning device K030

K6400BB

DOUBLE STOP

CAM CLEAN

descender with double locking and anti-panic system

K6391BB

W1015B020

LIFT right

locker sling

hand and chest ascenders for safe and smooth ascent

connecting sling for connection of your harness and LOCKER (fall arrester)

13


SINGING_Working_2010_Sestava 1 5.3.2010 1:01 Stránka 14

working

Work systems: rope access Rope access is called “royal discipline” in working at height activities. This working method is fast, effective, has little effect on the workplace and it is very quick to install nad dismantle. It is used for a wide variety of work: cleaning, painting, inspection and montage. Where is rope access used? There are five main areas in which rope access companies operate (and examples of the range of work carried out): • Inspection and Testing Safety surveys • Maintenance and Repair Sealant installation and reinstatement • Cleaning and Painting Jet spray, grit blast and three-tool method • Geotechnical (Civil Engineering) Permanent rock anchorage • Construction Cladding Photo: www.pavouci.cz, pavouci archive

14


SINGING_Working_2010_Sestava 1 5.3.2010 1:01 Strรกnka 15

C0007BB

C0046B120

Expedition bag tarp duffle 120 litres

VERVE kevlar and nomex

X0033RR00

Work helmet PLASMA

static 10,5 - 11

K4241ZO07

STEEL OVAL CONNECTOr TRIPLELOCK

W0010YB00

Franklin K0007EE00

W0045BR

EXPERT II speed standard

HYPNOS SCREW key lock

full body harness

K6400BB

CAM CLEAN hand and chest ascenders for safe and smooth ascent A0030YS00

rescue knife with first class stainless steel ejection blade

W1002BB

Defender

protects rope sheath against abrasion on rough surfaces and edges

K030

DOUBLE STOP descender with double locking and anti-panic system

K6391BB

W1010BS09

C2150BY

LIFT right

LOCKER

JACOB

guided type fall arrester and work positioning device

six staves aider

15


SINGING_Working_2010_Sestava 1 5.3.2010 1:01 Strรกnka 16

working

Work systems: concert rigging Complete range of black textile and metal (matt) products, including ropes and lanyards.

Photo: ActSafe archive

16


SINGING_Working_2010_Sestava 1 5.3.2010 1:01 Strรกnka 17

C0006BH

Grippy S9000BB50

static 11

gear bag 50 l black

X0033RR00

static 9

Work helmet PLASMA

K4241ZO07

STEEL OVAL CONNECTOr TRIPLELOCK K624

pulley extra roll

W0038BR

32 kN

FLEX II standard full body harness

K4081ZO

D STEEL CONNECTOR TRIPLE LOCK with triple lock gate, key lock, zinc plated

K626

pulley twin roll 50 kN

W1010BS09

LOCKER

K0007BB00

guided type fall arrester and work positioning device

HYPNOS SCREW key lock

W8100B

ROPE PROTECTOR

W4100Y

W1021WW20

JOULE 120

fine line

fall absorber 120 cm

fine line 20 complete

W1012WB02

Site 200 cm + K370 17


SINGING_Working_2010_Sestava 1 5.3.2010 1:01 Stránka 18

working

Work systems: fall arrest Systems for belaying persons at an anchorage point in order to avoid a fall or to arrest the fall safely. The falling distance is limited and the impact forces on the body are reduced to a tolerable degree. When the harness is used properly, it arrests the person’s fall, transmits the impact forces to more resistant body parts and keeps the body in an upright position. REACTOR - tape energy absorber is suitable for work which includes contact with dirt and humidity. A rescue plan and equipment is essential.

Photo: Vojtěch Watt Dvořák, SINGING ROCK archive

18


SINGING_Working_2010_Sestava 1 5.3.2010 1:01 Stránka 19

GLOVES GRIPPY 3/4 S9000BB35

K4241ZO05

gear bag

oval steel connector

35 l black

with screw gate, key lock

X0033RR00

Work helmet PLASMA

W0044BR

EXPERT II standard full body harness – Easy-lock buckles

K4081ZO

D STEEL CONNECTOR TRIPLE LOCK with triple lock gate, key lock, zinc plated

W4250W155

REACTOR 2 shock absorber with "eye" lanyards

W1010BS09

LOCKER guided type fall arrester and work positioning device

W2001B120

open sling 22 kN sewed sling 20 mm

W4100120

W1015B020

JOULE 120

locker sling connecting sling for connection of your harness and LOCKER (fall arrester)

fall absorber 120 cm

W2320WR

anchor Lanyard "I" 22 kN anchor device lenghts on customer's request

19


SINGING_Working_2010_Sestava 1 5.3.2010 1:02 Stránka 20

working

Work systems: arboristic An arborist, arboriculturalist or tree surgeon is a professional in the practice of arboriculture, which is the management and maintenance of trees. Arbo techniques allow a tree to be trimmed or completely removed log by log. To move around freely and efficiently, arborists fasten a rope from the ground and then install a device for ascending the rope. Once the arborist is in position, he needs to remain balanced and feels comfortable for pruning, removal of dead branches, shaping of tree for structural, health and aesthetic purposes. Arborist must be able to provide removals, including extremely large, and difficult trees, either around power, or over houses or streets.

Photo: Vojtěch Watt Dvořák, SINGING ROCK archive

20


SINGING_Working_2010_Sestava 1 5.3.2010 1:02 Strรกnka 21

TIMBER ACCESSORY CORD

TIMBER LOWERING ROPE rope diameter 15 mm

rope diameter 8 mm

STATIC ROPE

TIMBER THROW LINE

rope diameter 13 mm

rope diameter 2.5 mm

W00170B03

timber work positioning harness presenting a perfect choice for arborists

X0033RR00

Work helmet PLASMA

Accessory ropes 4 - 5 - 6 - 7 - 8 mm

GLOVES GRIPPY 3/4 GLOVES GRIPPY W1040B120

Jingle

K6220BB

pulley small roll W1012WB02

K9000BB03

K0015EE00

Site 200 cm + K370

porter

LARGO

accessory plastic carabiner

key lock

21


SINGING_Working_2010_Sestava 1 5.3.2010 1:02 StrĂĄnka 22

RESCUE

RESCUE systems: evacuation Ski lift or gondola evacuations utilize specialized rescue techniques and gear that must perform regardless of weather conditions. The success of evacuation operations begins with having the proper ski lift or gondola evacuation gear then hinges upon the instruction, training and practice of the operating personnel. If ski lift equipment fails, the person in charge must evacuate passengers according to the evacuation plan. Evacuation of a ski lift requires specific techniques for movement along a cable. For maximum efficiency, these operations are led simultaneously by several independent teams. Evacuation is a team effort and requires perfect coordination by everyone involved. SINGING ROCK team cooperates with ski resorts all over Czech Republic to improve rescue methods and develop a new gear. Photo: Jarek CĂ­ler, SINGING ROCK archive

22


SINGING_Working_2010_Sestava 1 5.3.2010 1:02 Stránka 23

S9000BB50

gear bag 50 l black

K0015EE00

static R44 11 mm

LARGO screw key lock K82310Z

maillon big D

X0033RR00

Work helmet PLASMA

K82210Z

W0044BR

EXPERT II standard full body harness – Easy-lock buckles

maillon big delta

W821OBY

Evacuation triangel COMBI with shoulder straps

A0030YS00

rescue knife with first class stainless steel ejection blade

W0003BY09

AXILLAR

W2001B120

rescue sling to secure evacuated persons against accidental fall during rescue action (e.g. ski lift evacuation)

open sling 22 kN sewed sling 20 mm

CD ski lift evacuation K0004BB

W4242W155

EASY LIFT

REACTOR 2

Rescue pulley for progression and evacuation along ski lift cable.

shock absorber integrated with lanyards + K353

23


SINGING_Working_2010_Sestava 1 5.3.2010 1:02 Stránka 24

RESCUE

RESCUE systems: industrial rescue The rescue hierarchy: Evacuation and rescue systems can be categorize in following points: • self rescue (evacuation) by descent • rescue by lowering • rescue by hauling • rescue by descent - Evacuation by Tyrolean traverse... All methods require specific techniques and sort of equipment.

Photo: Lukáš Neklan, SINGING ROCK archive

24

Downward evacuation Easier to install, this is the preferred type of evacuation, when possible. Downward evacuation takes place using gravity, applying different techniques determined for specific types of field. Upward evacuation Upward evacuation requires techniques which are sometimes particularly complex (hauling with a mechanical winch, creating a hauling system built from lightweight pulleys, using counterweight techniques, etc.)


SINGING_Working_2010_Sestava 1 5.3.2010 1:02 Stránka 25

K0007EE00

C0007BB

VERVE kevlar and nomex

static R44 10,5 static rope

HYPNOS SCREW key lock

K4080ZO

X0033RR00

D STEEL CONNECTOR SCREW

Work helmet PLASMA

with screw gate, key lock, zinc plated

K624 W0042BR03

PROFI WORKER speed

A0030YS00

rescue knife

pulley extra roll 32 kN

full body harness – SPEED buckles

with first class stainless steel ejection blade

K626

pulley twin roll 50 kN K6371BB

Rigging plate 3/5 W2283X180

STEEL LANYARD "I" 180 cm

W1010BS09

LOCKER

K6391BB

guided type fall arrester and work positioning device

LIFT right

K030

W1015B020

DOUBLE STOP

locker sling

descender with double locking and anti-panic system W4250W155

connecting sling for connection of your harness and LOCKER (fall arrester)

REACTOR 2 shock absorber with "eye" lanyard

25


SINGING_Working_2010_Sestava 1 5.3.2010 1:02 Stránka 26

RESCUE

RESCUE systems: after fall The hierarchy of fall protection rescue is simple: self-rescue by the worker who has fallen, assisted rescue by co-workers, and, if all else fails, calling in professional rescuers. A couple of notes: A facility should call for the professionals as soon as a worker takes a fall. Remember that the pros can always be turned around if our fallen worker is otherwise rescued. And assisted rescue by co-workers could consist of any of many means of assistance, from leaning out to hand a fallen worker a piece of rescue equipment or cranking the worker up or down to safety, even to using an on-site rescue squad utilizing professional rope rescue techniques.

Photo: Vojtěch Watt Dvořák, SINGING ROCK archive

26


SINGING_Working_2010_Sestava 1 5.3.2010 1:02 Stránka 27

A0045XX00

Pole perche 6 m 6 m long pole

static R44 11 mm

A0034AA00

TRIPOD adjustable telescopic feet with pivoting sole plate.

W0041BR

X0033RR00

PROFI WORKER standard

Work helmet PLASMA

full body harness – Easy-lock buckles

A0030YS00

A0032WA20

rescue knife

derope kt rescue device

with first class stainless steel ejection blade

A0057AP00

Evak 500 rescue device

DEROPE UP A rescue device

27


SINGING_Working_2010_Sestava 1 5.3.2010 1:02 Stránka 28

INTERVENTION

INTERVENTION systems: military and special forces Complete range of black textile and metal (matt) products, including ropes and lanyards. Special ropes with unique features. Easy use of equipment in the cruelest conditions you can image. Handling in gloves, manipulation in dark and quick releasing are obvious.

Photo: Vojtěch Watt Dvořák, SINGING ROCK archive

28


SINGING_Working_2010_Sestava 1 5.3.2010 1:02 Strรกnka 29

W1001BB08

swat rope for fast descent without descender

URNA rope bag to be fastened on the user's leg

Force

gear bag 50 l

a rope for use in extremely severe conditions 10 and 11 mm

W9001B***

Tactical gloves TUNDER nomex

W0021BB

strike

X0033RR00

Work helmet PLASMA

Tactic harness C0007BB

VERVE kevlar and nomex

W1010BS09

C0049BB00

LOCKER

HELMET terra II

guided type fall arrester and work positioning device

- black

K0007BB00

HYPNOS SCREW black matt key lock

W0005BBO9

LAIKA - BLACK K6021BB

K6132BBt

Figure 8 m

BUDDY

designed for ropes of smaller diameters

buddy is light and compact belay tube

dog harness

29


SINGING_Working_2010_Sestava 1 5.3.2010 1:02 Stránka 30

working & rescue

Main reason why SINGING ROCK harnesses are special is that they are exclusively manufactured in Poniklá in Czech Republic without compromises.

HARNESSES W0044BR

EXPERT II standard full body harness – Easy-lock buckles Fully adjustable fall-arrest harness with padded waist belt, leg loops and shoulder straps. Also suitable for work positioning, descent, ascent and rescue service. Easy-lock buckles – these features make from expert ideal harness for all. • padded waist belt, leg loops and shoulder • specially shaped waist and legs • front and back tie-in points for fall-arrest (EN 361) • front lower attachment point for descender placement or work positioning (EN 813) • side attachment point for work positioning (EN 358) • 2 big plastic gear loops + 4 textile loops for tool bag mounting • the leg loops construction insure enough comfort in bark area • easy-lock buckles enable fluent and fast adjustment to fit to users body • flat rear attachment point does not bear on users back when carrying rucksack or breathing apparatus • shoulders straps are totally removable Size: S, M/L, XL • Weight: (M/L) 2200 g (±15 g) • 77.6 oz. (±0,5 oz)

EXPERT II speed full body harness • SPEED buckles enable fluent and fast adjustment to fit to users body

Size: S, M/L, XL • Weight: (M/L) 2300 g (±15 g) • 81.13 oz. (±0,5 oz)

Size: S, M/L, XL • Weight: (M/L) 2500 g (±15 g) • 88.18 oz. (±0,5 oz)

W0038BR

FLEX II standard full body harness Fully adjustable fall-arrest harness providing great comfort with reasonable weight. Without the shoulder padding it is ideal for workers or rescuers demanding balance between comfort and the weight of the harness. Wide padding provides rich back support. Large gear loops and indeed Easy-lock buckles - these features make from flex ideal harness for experts or rescuers. Size: S, M/L, XL • Weight: (M/L) 1540 g (±15 g) • 54.32 oz. (±0,5 oz)

CE 1019 • EN 358 • EN 813 • EN 361

30

EXPERT II steel full body harness – steel components + easy-lock buckles • easy-lock buckles enable fluent and fast adjustment to fit to users body

W0045BR CE 1019 • EN 358 • EN 813 • EN 361

W0046BR

NFPA Class III, ANSI Z359.1


SINGING_Working_2010_Sestava 1 5.3.2010 1:02 Stránka 31

Smart and flexible and always close to our users, we have a suitable offer for every situation of industrial climbing. SINGING ROCK can offer you a full range of safety harnesses covering all areas of application.

speed SPEED buckles

STANDARD easy-lock buckles

steel

steel components + easy-lock buckles

W0041BR

PROFI WORKER standard full body harness – Easy-lock buckles Fully adjustable fall-arrest harness with padded waist belt, leg loops and shoulder straps. Also suitable for work positioning, descent, ascent and rescue service. Easy-lock buckles – these features make from profi worker ideal harness for all. Size: S, M/L, XL • Weight: (M/L) 1720 g (±15 g) • 60.67 oz. (±0,5 oz)

W0042BR

PROFI WORKER speed full body harness – SPEED buckles Size: S, M/L, XL • Weight: (M/L) 2030 g (±15 g) • 71.61 oz. (±0,5 oz

W0043BR

PROFI WORKER steel full body harness – steel components + easy-lock buckles CE 1019 • EN 358 • EN 813 • EN 361

Size: S, M/L, XL • Weight: (M/L) 1840 g (±15 g) • 64.9 oz. (±0,5 oz)

W0033BYXX

SEAMASTER Fully adjustable fall-arrest harness Fully adjustable fall-arrest harness with padded waist belt, leg loops and shoulder straps. Also suitable for work positioning, descent and ascent and rescue service. Fully adjustable fall-arrest harness providing great comfort • padded waist belt, shoulders and leg loops • back and front tie-in points for fall-arrest • front lower attachment point for descender placement or work positioning • side attachment point for work positioning • 4 big gear loops + 4 textile loops for tool bag mounting • the leg loops construction insure enough comfort in bark area • RL buckles enable fluent and fast adjustment to fit to users body • flat rear attachment point does not bear on users back when carrying rucksack or breathing apparatus • easy fixing of cam clean ascender in vertical position is provided by stitched strap between lower front attachment point front tie-in points for fallarrest and buvole. Size: M/L (1700 g) EN 358 • EN 813 • EN 361 • CE 1019

31


SINGING_Working_2010_Sestava 1 5.3.2010 1:02 Stránka 32

WORKING & RESCUE

HARNESSES W0035BR

SIT WORKER standard sit harness – easy-lock buckles The new design is subsidized by perfect functionality, comfort and lightness. Fully adjustable sit harness for work positioning having two side attachment points and descender attachment point. Intended for activities without risk of fall. Wide padding provides rich back support. Large gear loops and indeed easy-lock buckles – these features make from sit worker ideal harness for every day users. Size: S, M/L, XL • Weight: (M/L) 1100 g (±15 g) • 38.8 oz. (±0,5 oz)

CE 1019 • EN 358 • EN 813

W0036BR

W0037BR

SIT WORKER speed

SIT WORKER steel

sit harness – SPEED buckles

sit harness – steel components + easy-lock buckles

W0022BR

Urban II Sit harness for work positioning • anatomic waist belt and leg padding perfectly fits man anatomy • textile attachment point for work in hanging position, rappelling according to EN 813. • textile positioning points according to EN 358 are placed symmetrically, tested for 15 kN strength. 4 – buckle with a captive bar matches strict American standards (ANSI, CSA). No webbing slippage in a buckle. Its construction ensures longtime operation and efficiency (easy releasing and fastening even when dirty and tough webbing). Corrosion resistance is tested by salt spray test 48 hours. • braided gear loops with a bearing capacity of 10 kg provide enough space for 10 pieces of HMS carabiners. • additional loops with a bearing capacity of 5 kg offer additional space for the gear and better gear orientation. • slots designed for a secure hanging of expensive equipment (such as power saw, drilling machine,..) • identification and methodical label. To prolong its lifetime is advised to hide this label under the webbing.

• elastic strap with an adjustable buckle connecting leg loops with a waist belt. • back centric positioning point according to EN 358. Size: S, M/L, XL Weight: M/L 850 g (±15g) EN 358, EN 813, CE 1019

YW0031

W0030BR03

POLE PLUS

POLE

Work positioning belt • 70 cm long lanyard sewn in the left side attachment point • available in three sizes S, M/L, XL Weight: 455, 485, 515 g CE 0123 • EN 358

Belt for work positioning • one gear loop • possibility of gear bag connection • R&L buckles • light-weight • symmetrically positioned attachment points • padded with good firm foam • available in three sizes S, M/L, XL Weight: 450 g (M/L) CE 0123 • EN 358

32


SINGING_Working_2010_Sestava 1 5.3.2010 1:02 Stránka 33

POSITIONING

W1011WB02 - length 200 cm W1011WB04 - length 400 cm

SITE The work positioning lanyard with great handling makes your work safe and efficient • weight 560 g (with connector) • weight 410 g (without connector) • 11 mm rope sewn-in unopenable version of LOCKER - rope clamp (fall arrester) • rope covered with tubular webbing • parking cam for blocking in required position • available with stitched-in connector in accordance with EN 362 CE1019 • EN 358 • EN 353-2

W0051

W0047BR

Energetic

rl technic

sit harness for work positioning, fall arrest harness • Chest textile attachment point EN 361, EN 813, bearing capacity of 15kN. • Dorsal attachment point EN 361. Steel D-ring with a bearing capacity of 15kN. • 3 SPEED buckles allow very easy putting on. • Positioning twisted system - EN 358. The most comfortable positioning system on the Singing Rock harnesses. Positioning D ring divide load to waist belt and to bench. System allows rotation of body in the harness. • Wide [18 cm] and solid waist belt. Combination of foam and high density polyethylen. • Two braided gear loops with a bearing capacity 10kg. • Plastic D ring with a bearing capacity 5kg. • Reinforcement of bench is made from glass fiber. • Ideal harness for all who has to spend in harness hours or days.

sit harness for work positioning, fall arrest harness • an attachment point for work in hanging position, repelling according to EN 813 • positioning points according to EN 358 are placed in symmetrically. Light alloy D-rings are movable into so-called „parking position“, thus avoiding undesired catching during work. • rock & lock buckles • gear loops with a bearing capacity of 10 kg • slots designed for a secure hanging of expensive equipment (such as power saw, drilling machine,..) • identification and methodical label • slide buckle intended for chest ascender fastening • chest attachment point EN 361 • dorsal attachment point EN 361. This steel D-ring is flat and settled on a padding.

Size: M/L, XL Weight: 3350 g (M/L) (±15 g)

CE 0123 • EN 358 • EN 813 • EN 361

Size: S, M/L, XL • Weight: (M/L) 1590 g (±15 g) • 56.7 oz. (±0,5 oz)

CE 1019, EN 813, EN 358, EN 361

W1012WB02

Site 200 cm + K370 W1012WB04

Site 400 cm + K370

33


SINGING_Working_2010_Sestava 1 5.3.2010 1:02 Stránka 34

WORKING & RESCUE

rope courses W0050BR01 (XS-S) W0050BR05 (M-XL)

Tarzan full adjustable full body harness intended for rope courses and adventure parks • Attachment point for work in hanging position, rappelling according to EN 813. • Speed buckle connecting shoulder straps with waist belt. Increased comfort when putting the harness on. • Buckle with a captive bar matches strict American standards (ANSI, CSA). Its minimum strength is 17.2 kN. No webbing slippage in a buckle. Its construction ensures longtime operation and efficiency (easy releasing and fastening even when dirty and tough webbing).Corrosion resistance is tested by spraying in a salty chamber for a period of 48 hours. • There are slots on waist belt designed for a secure hanging of expensive equipment (such as power saw, drilling machine,..) or you can use slot for carabiner Porter K9000BB. • Identification and methodical label. To prolong its lifetime is advised to hide this label under the webbing. • Shoulder webbing has different colour. • Left leg loops with red colour inside. • Different colour of rear plate for each size. • Dorsal attachment point EN 361. Steel D-ring with a bearing capacity of 15 kN. This D-ring is flat and settled on a padding. • Webbing strap stitched in the buckle simplify handling with buckle. Size: XS - S, M - XL Weight: 1530 g (M - XL) ±15 g CE 1019, EN 813, EN 361

C5003BY

ROPEDANCER full body harness Fully adjustable fall-arrest harness with various attachment points. Harness is not padded, thus light-weight. In spite of it, Ropedancer satisfies even demanding user, who requires various attachment point. Also suitable for rope courses. The sizes are distinguished by the colour of triangle in the rear part: grey - S, yellow - M/L, orange - XL. Size: S, M/L, XL • Weight: 1280 g (M/L) CE 1019 • EN 361 • EN 813

34


SINGING_Working_2010_Sestava 1 5.3.2010 1:02 Stránka 35

W0010YB00

W021

Franklin

RL CHEST PLUS

Work positioning seat provides more comfort when hanging in the harness. It is intended for use with our fall arrest or work positioning harnesses. It is easy to adjust with Rock&lock buckles. Wide sitting area ensures good stability and allows comfortable hanging as well as standing work position. Suspension straps do not press on your thighs. Three D-rings (bearing capacity 50 kg) for vessel or other gear suspension. Max. load of seat: 250 kg Weight: 1650 g

chest harness supplied with connector W020

RL CHEST fully adjustable chest harness It is certified in combination with RL sit as a full body fall-arrest harness according to EN 361. Size: UNI • Weight: 600 g Use only in combination with sit harness!

W0048BR

EX-TEN Support of waist belt to increase comfort of user at prolonged working in height • 7 mm thick padding. Foam with close pore do not absorb water • High density polyethylene create support of back and comfort • lace webbing made from polyester with high abrasion resistance Size: S, M/L, XL Weight: 340g (M/L)(±15g)

35


SINGING_Working_2010_Sestava 1 5.3.2010 1:02 Stránka 36

WORKING & RESCUE

HARNESSES

W0320

W0032SY

W0049BY00

BODY

UNIT

BASIC speed

full body harness Fully adjustable fall-arrest harness with two fallarrest attachment points (EN 361). Intended for working in places with the risk of fall. Harness is compact and light-weight, thus suitable for horizontal or inclined planes. It allows temporary hanging in.

Fully adjustable fall-arrest harness with two fallarrest attachment points (EN 361). Intended for working in places with the risk of fall. Harness is compact and light-weight, thus suitable for horizontal or inclined places. It allows temporary hanging in. Side attachment points for work positioning (EN 358).

full body harness Fall arrest harness with one fall-arrest attachment point (EN 361). • Very simple and compact fall-arrest harness. • Advantages: easy to put on - SPEED buckles, lightweight, minimal volume of packed harness. • Harness is intended for temporary work in height and for work on horizontal roofs or constructions.  

• front and rear attachment points for fall arrest • side attachment point for work positioning • buckles on leg loops and shoulders are sewn in together • easy to adjust • easy to put on and off • 2 sizes (M/L, XL) fit all from 155 to 210 cm

Size: UNI • Weight: 620 g CE 1019 • EN 361

Size: S, M/L, XL • Weight: 1050 g (M/L) CE 1019 • EN 361

CE 1019 • EN 361 • EN 358

36


SINGING_Working_2010_Sestava 1 5.3.2010 1:02 Stránka 37

arbo W00170B03

timber Work positioning harness presenting a perfect choice for arborists • adjustable sliding D-ring enables you to take safe, comfortable and effective work position • wide and stiff padding offers great comfort when hanging in the harness • side D-rings for work positioning EN 358 or gear attachment • 4 gear loops • waist belt construction allows to attach special power saw connector Size: M/L, XL • Weight: 1800g, 1950 g CE 0123 • EN 358 • EN 813

K9000BB03

porter Plastic holder for racking ice screws, pitons and industrial tools. • for racking ice screws, pitons and industrial tools on the harness • easy clipping and un-clipping • the nose on the upper part allows to set away some staff in order to access staff on the bottom. • rubber part fixes the Porter on place and prevent it from rotation WARNING: NOT FOR CLIMBING! The Porter is NOT load-bearing! It is not designed to hold human´s weight. Do not use it for protection or belaying. Max. load: 5 kg Weight: 32 g Color: black

W1040B120

JINGLE Sling intended for use in tree climbing as anchor device and belay anchor. The different size of the rings enables easy and quick installing and removing of the sling from the ground. As well suitable in industry as an anchor device. • length of the slings with "O" ring - 80, 100, 120 cm • strength 10 kN • forged steel "O" rings • inside and outside diameter of "O" rings: big 58/73 mm, small 38/52 mm • 3 layers of webbing sewn together CE 1019 • EN 795B

W1036W130

track plus Adjustable anchoring strap and work positioning lanyard • length adjustment from 80 to 130 cm CE 1019 • EN 354 • EN 358 • EN 795 B

37


SINGING_Working_2010_Sestava 1 5.3.2010 1:02 Stránka 38

WORKING & RESCUE

STATIC ROPES Excellent static ropes of different diameters are intended for rescuing the injured, manipulation with objects and rope access methods for work at a height. They meet the most exacting requirements, especially the best quality, that the rescuers, firemen, specialists in working at a height and other professionals require when working every day. CE 0123 • EN 1891 • UIAA

3 table of parameters on page 79

static R44 10,5 L0430WR L0430RR L0430BB L0430KK

white red black khaki

static R44 11 L0450WG L0450RR L0450BB L0450OO

white red black orange

static 10,5

static 11

static 9

L0230WR L0230RR L0230BB L0230KK

L0250WR white L0250RR red L0250BB black

L0220WR white L0220BB black

white red black khaki

L026

CONTRA 10,5 static rope Excellent static is intended for rescuing the injured, manipulation with objects and rope access methods for work at a height. It meets requirements that the rescuers, firemen, specialists in working at a height and other professionals require when working every day. • Ultrasonic • Thermotransfer end marking

3 table of parameters on page 79

38

pack 50, 60, 70 m, coil 100, 200 m, customer request


SINGING_Working_2010_Sestava 1 5.3.2010 1:02 Stránka 39

STATIC ROPES STATIC 13

L110TS09S000C

L130TS03S000C - white

Reflective 11

This excellent rope with low elongation and high static strength is intended primarily for work at height and for securing people above vertical drops. The thicker the diameter, the stronger the rope.

These special static ropes are intended for work under poor lighting conditions. Thanks to a braided 3M reflective strip that reflects light, the rope is very visible. It is mainly appreciated by spelunkers and miners. The newly developed rope with reflection control weaving reflects a beam of direct light, making it easier to identify the rope in the dark and in poor lighting conditions. The rope is particularly useful for rescue work, speleology, diving and as a tracing rope for mines.

• Tendon electronic rope marking (TeROM) • Compact - compact ending • Antistat • Fireshield Packing: Coils: 30, 40, 50, 60, 70, 80, 100, 200 m Spools: 100, 200 m Colours: white, red, blue

• Tendon electronic rope marking (TeROM) • Compact - compact ending • Antistat • Fireshield

CE 1019 • EN 1891 • UIAA

Packing: Coils: 30, 40, 50, 60, 70, 80, 100, 200 m Spools: 100, 200 m CE 1019 • EN 1891 • UIAA

speleo ropes L0440WR

SPELEO r44 10,5 L0240WR

SPELEO 10,5

timber ropes

TIMBER LOWERING ROPE

timber STATIC ROPE

TIMBER ACCESSORY CORD

TIMBER THROW LINE

rope diameter 15 mm

rope diameter 13 mm

rope diameter 8 mm

rope diameter 2.5 mm

39


SINGING_Working_2010_Sestava 1 5.3.2010 1:02 Stránka 40

WORKING & RESCUE

Dynamic ropes SINGING ROCK and TENDON mountaineering ropes are the only ones in the world manufactured with a licence for the DuPont™ TEFLON® fabric protector. The ropes protected with a layer of TEFLON® are distinguished by their resistance to water and abrasion. TEFLON® also effectively prevents the penetration of dust particles into the structure of the ropes and thus increases their service life and your safety! Why do you need resistance to water and abrasion? Maximum water and abrasion resistance are among the most important requirements when choosing the correct mountaineering rope. Each dynamic rope is exposed to the affects of moisture and abrasion during its use – both of these factors have a huge influence on the mountaineer’s safety.

L032

L036

L034

glory 9.8

Score 10.1

duran 10.4

• Single mountaineering rope produced on 44-carrier machine (Singing Rock's patented technology). This unique technology gives to the rope great handling, rope is compact, low-weight and durability. Rope is easy to knot and unknot as well. • All technical parameters are in tune with each other, giving Glory 9.8 mm great handling. • The rope is compact. Allowing minimal inter-fiber friction and resulting in the round crosssection. • Rope is durable and pleasant to use.

• Single mountaineering rope produced on 44-carrier machine (Singing Rock's patented technology). High top product with balanced parameters. • Rope is durable and pleasant to use.

• The rope is made by Singing Rock patented technology R44, which gives to the rope well - balanced rate of weight and diameter. • All parameters are very much in tune with each other. Rope is therefore very compact. Rope is durable, pleasant to use. Impact force and number of falls are standard. • The main feature of this rope is thicker sheath with perfect abrasion resistance. The rope is keeping good handling. The most types of belay devices are suitable for belaying. • Ideal for areas with rough rocks and indoor climbing Tested on El Cap in Yosemite valley during ON THE SUN 2007 expedition.

• Thermotransfer end marking • Middle marking • Ultrasonic ending CE 0123 • EN 892 • UIAA

• Thermotransfer end marking • Middle marking • Ultrasonic ending CE 0123 • EN 892 • UIAA

• Thermotransfer end marking • Middle marking • Ultrasonic ending CE 0123 • EN 892 • UIAA

3 table of parameters on page 79

40


SINGING_Working_2010_Sestava 1 5.3.2010 1:02 Stránka 41

DYNAMIC ropes

L035

L051

L303

wallter 10.4

accord 8.2

MANIA 9.7

• The rope is made by Singing rock patented technology R44 which gives to the rope well – balanced rate of weight and diameter regarding to the thicker sheath as well. All parameters are very much in tune with each other. Rope is therefore very compact. Rope is durable, pleasant to use. Impact force and number of falls are standard. • Rope specially developed and tested for use on artificial walls where top roping and short drops are very frequent. The main feature of this rope is thicker sheath with perfect abrasion resistance. The rope is keeping good handling. The most types of belay devices are suitable for belaying.

• Compact rope which allows minimal interfiber friction, giving great durability. • Tested and certified according to EN 892 standard requirements as half rope and twin rope. • Rope's weight, diameter and number of falls are balanced in such way that Accord 8,2 can be used both as half and twin rope. • Used in pairs, the climber can choose between the twin rope technique or half rope technique with respect to momentary situation in the wall.

• Extremely light and robust it is ideal for hard routes onsight, flash or redpointing were every gram counts. • With our new special EIN–ZWEI–DRY treatment the MANIA 9.7 is ideal for rock, pumpy routes and extrem ascents in mountains. We used the latest technologies and knowledgement of our develop department. • TEFLON is applied on ropes by revolutionary nanotechnology. SBS gives the rope better properties. Every streak of the sheath is guided individually, not in a pair as usual. The sheath is more resistant against breakage, but on the other hand it is smoother.

• Thermotransfer end marking • Middle marking • Ultrasonic ending

CE 0123 • EN 892 • UIAA

CE 0123 • EN 892 • UIAA

• Thermotransfer end marking • Ultrasonic ending

• Treatment EIN–ZWEI–DRY • Thermotransfer end marking • Middle marking • Ultrasonic ending CE 0408 • EN 892 • UIAA

3 table of parameters on page 79

41


SINGING_Working_2010_Sestava 1 5.3.2010 1:02 Stránka 42

WORKING & RESCUE

Dynamic ropes

special rope

accessory ropes

L302

W2500****

L0004 - L0008

GEMINI 7.9

STITCHED EYE

ACCESSORY CORD

• Tested and certified according to EN 892 standard requirements as half rope and twin rope. • Lightweight and top parameters allow wide using: Ice climbing and mix routes, glacier and mountains. Quality without compromise. • TEFLON® is applied on ropes by revolutionary nanotechnology.

strength knot breaking force strength with the knots elongation max. impact force weight sheath slippage shrinkage diameter material number of falls

Suitable for a multitude of uses, SINGING ROCK accessory cords are strong and supple. • easy handling • strong • multitude of uses

• Treatment EIN–ZWEI–DRY • Thermotransfer end marking • Ultrasonic ending

30 kN 18 kN 15 kN/3 min. 3,2 % 6 kN 79 g/m 0 mm 3% 11 mm PA 50

Diameters: 4, 5, 6, 7 and 8 mm Material: Polyamide CE 0123 • EN 564 • UIAA

CE 0408 • EN 892 • UIAA lenghts on customer's request colors: black, white EN 1891 , CE 1019

3 table of parameters on page 79

42


SINGING_Working_2010_Sestava 1 5.3.2010 1:02 Stránka 43

accessory W0018OO00

PANCAKE Designed to improve hauling systems and to make an ascent along the rope easier. Part of tackle systems: • prevents from getting prusik knot into the pulley • ideal for hauling in bigwalls and during rescue actions Ascending along a fixed rope: • prusik knot moves upwards without hand intervention Weight: 15 g • 0,53 oz. • Size: UNI Material: POM • Color: orange ATTENTION: Pancake itself doesn´t ensure safety of prusik knot. Strength of prusik knot depends on parameters of both cord and rope!

C0001BB

Rope Bag With removable sheet. Size of sheet is 137 x 137cm. Hidden pocket for keys and money. Shoulder straps are well padded. Abrasion resistant material. Weight: 620 g Color: black

W1001BB08

URNA Rope bag to be fastened on the user's leg. Max. length of the rope 50 m. Have your rope under control. Weight: 240 g Capacity: 11 l

W8100B

W1002BB

rope protector

Defender

Chrání lano proti prodření přes ostré hrany 50/70/100/120 cm • 20/28/40/48 in Materiál: PVC

Chrání lano proti prodření přes ostré hrany Toto tejřidlo je polstrováno a pojme i více lan. 80/120 cm • 32/48 in Materiál: Cortex

43


SINGING_Working_2010_Sestava 1 5.3.2010 1:02 Stránka 44

WORKING & RESCUE

STEEL CONNECTORS K4080ZO

K4081ZO

D STEEL CONNECTOR / SCREW

D STEEL CONNECTOR / TRIPLE LOCK

with screw gate, key lock, zinc plated 50 kN 13 kN 20 kN gate opening (d) 25 mm • 255 g • 9 oz. unique number CE 1015 • EN 362

with triple lock gate, key lock, zinc plated 50 kN 13 kN 20 kN gate opening (d) 25 mm • 267 g • 9,42 oz. unique number CE 1015 • EN 362

K4241Z005

K4241ZO07

oval steel connector / SCREW

STEEL OVAL CONNECTOr / TRIPLELOCK

with screw gate, key lock 30 kN 9 kN 8 kN gate opening (d) 17 mm zinc-plated • 176 g • 6,21 oz unique number CE 1015 • EN 362

with key lock and triplelock gate Weight: 195 g Strength: 30 kN, 9 kN, 8 kN unique number CE 1015, EN 362

K36421ZO

K36721ZO

connector + rotating hanger

connector + rotating hanger

with screw gate locking 45 kN 30 kN gate opening (d) 22 mm zinc-plated • 334 g unique number CE 0639 • EN 362

with twist lock rotating hanger with overloading indicator 32 kN 30 kN gate opening (d) 22 mm zinc-plated • 347 g unique number CE 0639 • EN 362

K369OZO

STEEL CONNECTORS • designed for industrial use • oval connector is ideal for pulleys, tackles, ascenders or descenders • key lock nose (except rotating hangers) • unique number marking • zinc plated surface • individually tested up to 10 kN (D steel connectors up to 15 kN) Material: steel

SMALL CONNECTOR with double trigger automatic locking gate opening 21 mm • 25 kN zinc-plated • 244 g unique number CE 0639 • EN 362

LIGHT ALLOY Connectors

44

K4280PP

K4290PP

K5070PP

D bar carabiner screw gate

D bar carabiner twist lock

D big connector screw gate

with screw gate and captive bar, polished 30 kN 9 kN 11 kN gate opening (d) 19 mm • 76 g unique number CE 0639 • EN 362 • EN 12275

with twist lock and captive bar, polished 30 kN 9 kN 11 kN gate opening (d) 19 mm • 81 g unique number CE 0639 • EN 362 • EN 12275

polished 30 kN 8 kN 9 kN gate opening (d) 26 mm • 88 g unique number CE 0639 • EN 362 • EN 12275

steel

wire anchors gate opening: K70908PO (d) 80 K70910PO (d) 100 K70914PO (d) 140 Ideal for constructions or towers where the large gate opening is necessary. Stainless steel • 350 g (K70910PO) CE 0639 • EN 362


SINGING_Working_2010_Sestava 1 5.3.2010 1:02 Stránka 45

LIGHT ALLOY CONNECTORS

K3702PP

K3536201

K3550PP

K3600PP

small connector

big connector

big connector GIGA

big connector

with double trigger automatic locking gate opening 21 mm • 25 kN polished, Al • 150 g unique number CE 0639 • EN 362

with double trigger automatic locking gate opening 60 mm • 25 kN polished, Al • 450 g unique number CE 0639 • EN 362

with double trigger automatic locking gate opening 110 mm • 25 kN polished, Al • 965 g unique number CE 0639 • EN 362

with sliding lock gate and openable captive bar gate opening 60 mm • 25 kN polished, Al • 280 g unique number CE 0639 • EN 362

LIGHT ALLOY CONNECTORS - KEY LOCK K0012EE00 K0012BB00 black matt

EXTASY / SCREW Our smallest screw carabiner for all vertical activites. For better gear management the gates are in different colors. With screw gate, key lock, anodized 25 kN 8 kN 10 kN gate opening (d) 17 mm • 52 g • 1,82 oz. unique number CE 1015 • EN 12275 • EN 362

K0007EE00 K0007BB00 black matt

HYPNOS / SCREW Light and compact HMS carabiner for belaying münter hitch or with tube. For better gear management the gates are in different colors. With screw gate, key lock, anodized 22 kN 7 kN 7 kN gate opening (d) 21,5 mm • 71 g • 2,49 oz. unique number CE 1015 • EN 12275 • EN 362

K0008EE00 K0008BB00 black matt

HYPNOS / TWL Light and compact HMS carabiner for belaying münter hitch or with tube. For better gear management are gates in different colors. With twist lock, key lock, anodized 22 kN 7 kN 7 kN gate opening (d) 21,5 mm • 75 g • 2,63 oz. unique number CE 1015 • EN 12275 • EN 362

45


SINGING_Working_2010_Sestava 1 5.3.2010 1:02 Stránka 46

WORKING & RESCUE

light alloy connectors K4630PP

K4640PP

Carabiner Lock oval

Carabiner Lock oval TWL

screw gate, polished 24 kN 8 kN 7 kN gate opening (d) 20 mm • 74 g unique number CE 0639 • EN 12275 • EN 362

with twist lock, polished unique number 24 kN 8 kN 7 kN gate opening (d) 19 mm • 80 g CE 0639 • EN 362

K0014EE00

K0015EE00

LARGO screw

LARGO triple lock

Light alloy connector with screw gate and HMS shape. Class B With screw gate, grey anodizing, light alloy • large opening • screw gate • key-lock • shape suitable for HMS belaying unique number 22 kN 8 kN 8 kN gate opening (d) 30.5 mm 100 g • 3.53 oz.CE 1015 • EN 362

Light alloy connector with triple lock gate and HMS shape. Class B With triple lock gate, grey anodizing, light alloy • large opening • triple lock gate • key-lock • shape suitable for HMS belaying unique number 22 kN 8 kN 8 kN gate opening (d) 30.5 mm 104 g • 3.67 oz.CE 1015 • EN 362

K5420PE

HMS jumbo

screw gate polished / red elox 22 kN 9 kN 8 kN gate opening (d) 25 mm • 94 g CE 0639 • EN 12275

STEEL MAILLONS

46

K82006Z

K82008Z

K82207Z

K82310Z

K82210Z

maillon mini oval

maillon small oval

maillon small delta

maillon big D

maillon big delta

D 6 mm 4 kN gate opening 7,5 mm zinc-plated • 33 g

D 8 mm 25 kN gate opening 11 mm zinc-plated • 77 g CE 0082 • EN 12275 • EN 362

D 7 mm 4 kN gate opening 11 mm zinc-plated • 60 g

D 10 mm 25 kN gate opening 12 mm zinc-plated • 144 g CE 0082 • EN 12275 • EN 362

D 10 mm 25 kN gate opening 12 mm zinc-plated • 151 g CE 0082 • EN 12275 • EN 362


SINGING_Working_2010_Sestava 1 5.3.2010 1:02 Stránka 47

ACCESSORY CARABINERS Accessory carabiners for connection of auiliry equipment.

photo: Vojtěch Watt Dvořák

K5052EE00

mini pear elox • mix 16 g gate opening (d) 11 mm not for climbing

K5182EE00

mini D elox • mix 25 g gate opening (d) 14 mm 6 kN not for climbing

ACCESSORY K6100BB00

Butterfly Butterfly fixates a connector in the rope eye in its ideal possition and thus prevents its unfitting loading in transversal direction. It can be fitted to the following Singing Rock connectors: K4080, K4081, K5070, K5330, K5420

K9000BB03

PORTER Plastic holder for racking ice screws, pitons and industrial tools. • for racking ice screws, pitons and industrial tools on the harness • easy clipping and un-clipping • the nose on the upper part allows to set away some staff in order to access staff on the bottom. • rubber part fixes the Porter on place and prevent it from rotation. WARNING: NOT FOR CLIMBING ! The Porter is NOT load-bearing! It is not designed to hold human´s weight. Do not use it for protection or belaying. Max. load: 5 kg Weight: 32 g Color: black

47


SINGING_Working_2010_Sestava 1 5.3.2010 1:02 Stránka 48

WORKING & RESCUE

ANCHOR DEVICES

K700X12 - 12 mm K700X10 - 10 mm

hanger plate Stainless steel hanger plate for permanent anchor point. Weight: 45 g (1.60 oz.) Strength: 25 kN

K701008

K7001PP10

Glue in anchor

Complete anchor assembly

Stainless steel permanent anchor point. The pointed end allows the distribution of the glue in the hole (14 mm diameter) thus guaranteeing a solid anchor point. Easy to insert. Length of shaft: 75 mm. Weight: 90 g (3.18 oz.) CE 0639 • EN 959 • EN 795

with diameter 10 mm Stainless steel hanger plate for creating of belay station. Weight: 107 g (3.77 oz) Hanger breaking strength: 25 kN Total lenght: 87 mm

K0006RP00

RedBlock • device, that extends lifetime of the rope when toproping • ideal partner for adventure parksand gyms • allows to be installed in two axises. For better traceability and inspection recording the RedBlock is marked with the unique number.

A0002SS00

D - mobile

Color: red Weight: 375 g Material: stainless steel Sheave: light alloy Max. diameter of rope: 12 mm Strength: 26 kN

door or window anchor point Allows to use a door or window as an anchor point. Max. spacing 1100 mm - 1 user only can be connected. Spacing to 800 mm - 2 users can be connected. Very fast and easy to set up. Weight: 10 kg CE 0123 • EN 795B

48

unique number CE 1015

K6370BB

K6371BB

K7950EE

Rigging plate 1/3

Rigging plate 3/5

twister

Helps to organize carabiners at a standpoint. Efficient force distribution at different load directions. Rounded holes (thickness 10 mm) allow to attache ropes directly to rigging plate (any hole). 36 kN • thickness 5 mm • light alloy • black matt • 69 g (2.45 oz.) • CE 0639

Helps to organize carabiners at a standpoint. Efficient force distribution at different load directions. 45 kN • thickness 7 mm • light alloy • black matt • 150 g (5.30 oz.) • CE 0639

rotating anchor Placed between a load and either rope or cable, the twister avoids severe rope twisting while the load turns. Working load: 5 kN. Color: orange / red elox Strength: 40 kN Weight: 165 g (5.82 oz.)


SINGING_Working_2010_Sestava 1 5.3.2010 1:02 Stránka 49

belay devices

K6031EE K6031BB black mat

Figure 8 L Designed for ropes of bigger diameters. 30 kN • color mix • 125 g • 4,41 oz.

• for ropes of various diameters • many color variants • easy rappelling • effective heat distribution

K6021EE K6021BB black mat

Figure 8 m Designed for ropes of smaller diameters. 25 kN • color mix • 104 g • 3,67 oz.

K6170BB

big figure eight 40 kN black matt 240 g

K6132EE K6132BB black matt

K6140EE00 K6140BB00 black matt

BUDDY

SHUTTLE

Buddy is light and compact belay tube. For all round climbers. Designed for ropes 7,8 - 11 mm mix color • 54g • 1,91 oz.

belay and rappel device One device to do it all, the Shuttle offers maximum versatility. It has a groove, designed and shaped to provide equal friction for both thin and thick ropes. When you’re belaying from above, the “guide mode” lets you bring up one or two seconding climbers under control. For lowering, it has a small secondary hole that you can clinch carabiner for or sling more leverage to release the device.

Here´s the reason that a lot of climbers aren´t bealying with a figure 8. The Hornet is extremely smooth on rappel, locks off a falling climber quickly, and feed rope like dream. Great heat dissipation on rappel. Two friction modes.

• designed for twin, half and single ropes • lightweight and compact, only 65 g • V-grooves for high friction when belaying the leader or rappeling • self locking function when belaying the second • eye for releasing the weight • possibility of simultaneous belaying two climbers Weight: 65 g / 2.29 oz Rope diameter: 7.8 – 10.5 mm Material: Light alloy

49


SINGING_Working_2010_Sestava 1 5.3.2010 1:02 Stránka 50

WORKING & RESCUE

ANCHOR DEVICES AND LANYARDS

open sling 22 kN

eye sling 30 kN

sling lanyard 22 kN

sewed sling 20 mm

sewed sling made of two layers of strength strap wear indication

sewed sling made of two layers of strength strap wear indication

[cm]

[in]

kN

W2001Y060

60

24

22

W2001A080

80

32

W2001R120

120

47

W2001B150

150

60

[in]

kN

W2000X060

60

24

30

22

W2000X080

80

32

22

W2000X120

120

47

22

W2000X150

150

60

[cm]

[in]

kN

W2015X060

60

24

22

30

W2015X080

80

32

22

30

W2015X120

120

47

22

30

W2015X150

150

60

22

type

CE 1019 • EN 566 • EN 795B • EN 354

CE 1019 • EN 354 • EN 795B

CE 1019 • EN 354 • EN 795B

lanyard "I" 22 kN

lanyard "V" 22 kN

W232OWR

lanyard

lanyard [cm]

type

[in] kN

[cm]

[in]

kN

W2300W060

60

24

22

W2200W001

25/45 10/17 22

W2300W080

25/65 10/30 22

80

32

22

W2200W002

W2300W120 120

47

22

W2200W100 100/100 40/40 22

W2300W150 150

60

22

CE 1019 • EN 354 • EN 795B

50

[cm]

type

CE 1019 • EN 354

type

anchor Lanyard "I" 22 kN type

anchor device lenghts on customer's request CE 0123 • EN 795B


SINGING_Working_2010_Sestava 1 5.3.2010 1:02 Stránka 51

W2100X

LARA Lanyard and anchor device for working in height made from dynamic rope LARA is tested pursuant the EN 354 standard for lanyards and pursuant the EN 795B standard for anchor devices. Both ends of the rope are terminated with stitched eyes for placing carabiners. Strength seam is protected with plastic cover. Singing Rock recommends using carabiners with sling/rope fixation, which do not scroll in the loop and are all the time ready for use. LARA forms part of a fall arrest system and shall be used appropriately. WARNING: LARA lanyard can not be used as a fall absorber! lengths: 60, 80, 120, 150 cm W1045O

GUMMA [cm]

[in]

kN

W2100X060

60

24

22

W2100X080

80

32

22

W2100X120 120

47

22

W2100X150 150

60

22

CE 1019 • EN 354 • 795 B

type

lanyard • available in two lengths - min. 65 (max. elongation 100), min. 90 (max. elongation 150) • different types of connectors (EN 362) possible to sew in • length when loaded with the weight of the user: 100 cm, 150 cm • strength 22 kN Warning: Do not use as a fall absorber! CE 1019 • EN 354

W2283X130 - length 130 cm W2283X180 - length 180 cm

W4002X060 - 60/60cm W4002X120 - 120/120cm

STEEL LANYARD "I"

Giro

W2284XX03 - length 300 cm W2284XX05 - length 500 cm

STEEL ANCHOR "I"

Lanyard type "V" Polyamid webbing width 44mm Steel “D” ring with zinc plated surface finishing Protection against abrasion of webbing Screw steel carabineer with twister K36421ZO 45 kN 30 kN Recommended use: Lanyard designed for hanging under helicopter. Weight: 1030 g (±15 g) • 36.33 oz (±0,5 oz) EN 354, CE 1019

51


SINGING_Working_2010_Sestava 1 5.3.2010 1:02 Stránka 52

WORKING & RESCUE

SLINGS C2085

C2075

Express slings 16 mm

slings 16 mm

22 kN width: 16 mm lengths: 11, 13, 16, 20 and 30 cm / 4.4, 5.2, 6.4, 8 and 12 in CE 1019 • EN 566

22 kN width 16 mm A light and strong nylon slings available from 60 to 150 cm. width: 16 mm lengths: 60, 80, 120 a 150 cm / 24, 32, 48, 60 in CE 1019 • EN 566

C2000

C2001

dyneema express slings

dyneema slings

22 kN width: 11 mm lengths: 11, 13, 16, 20 and 30 cm / 4.4, 5.2, 6.4, 8 and 12 in CE 1019 • EN 566

22 kN Light, thin and still very strong. These 11 mm slings are ideal for all applications were weight and strenght come first. lengths: 60, 80, 120 a 150 cm / 24, 32, 48, 60 in CE 1019 • EN 566

C2419

SAFETY CHAIN 16 mm polyamid webbing Lengths: 120 / 140 cm Strenght: 22 kN sling / 3,5 kN individual loop Innovated „daisy chain”: Innovated device, “double loop at the end”, which provides a safe, adjustable attachment of the climber to the anchor point. 16 mm webbing in the form of an adjustable lanyard which avoids DANGEROUS use of the traditional daisy chain. “Safe way to shorten your adjustable lanyard to any loop without using more than one carabiner or unclip the first loop” Safety Chain can be shortened to any loop safely. • 11 loops safetychain 140 cm / 56 in • 9 loops safetychain 120 cm / 48 in CE 1019 • EN 566

52


SINGING_Working_2010_Sestava 1 5.3.2010 1:02 Stránka 53

ASCENDERS K6392BB

LIFT left O / rope 8 - 13 mm Size: UNI • Weight: 215 g CE 0639 ��� EN 567 K6391BB

LIFT right O / rope 8 - 13 mm Size: UNI • Weight: 215 g CE 0639 • EN 567 Hand and chest ascenders for safe and smooth ascent

K6400BB

CAM CLEAN O / rope 8 - 13 mm • Size: UNI • Weight: 140 g CE 0639 • EN 567

W1024BX00

FOOTER II

S1100BY

ascender webbing without maillon Dimension: Min. length: 50 cm (19.7 in) Max. length: 150 cm (59 in) Weight: 145 g (5.11 oz.) Rock&Lock smart buckle (steel).

PULLER accesory webbing for chest ascender fixation Width: 25 mm Size: UNI

W1025BX00

FOOTER II COMPLETE ascender webbing with maillon Dimension: Min. length: 50 cm (19.7 in) Max. length: 150 cm (59 in) Weight: 180 g (6.35 oz.) Rock&Lock smart buckle (steel). C2150BY

jacob Six staves aider. Staves reinforced with plastic keep its shape even when loaded. Strength 500 kg. Strength of grab loop 100 kg.

53


SINGING_Working_2010_Sestava 1 5.3.2010 1:02 Stránka 54

WORKING & RESCUE

SELF BRaKING DESCENDERS

accessory

K030DSD30

K01000BB

W0018OO00

DOUBLE STOP

descender indy

PANCAKE

Descender with double locking and anti-panic system: self-breaking in case of accidental loss of descent control. Sensitive handle enables smooth descent without harmful rope twisting. Also suitable for works at a height and for emergency self evacuation. O / rope 11 mm Size: UNI • Weight: 340 g CE 0123 • EN 341

Descender with double locking and anti-panic system. EN 341 A O / rope 10 - 11mm EN 12841 C O / rope 10 - 13mm Size: UNI • Weight: 469 g CE 0426 • EN 341 A • EN 12841 C

Designed to improve hauling systems and to make an ascent along the rope easier. Part of tackle systems: • prevents from getting prusik knot into the pulley • ideal for hauling in bigwalls and during rescue actions Ascending along a fixed rope: • prusik knot moves upwards without hand intervention

Self braking descenders for single rope with double locking system.

Weight: 15 g • 0,53 oz. • Size: UNI Material: POM • Color: orange ATTENTION: Pancake itself doesn´t ensure safety of prusik knot. Strength of prusik knot depends on parameters of both cord and rope!

SELF BRaKING DEVICES

W1010BS09

W1015B020

locker

locker sling

Guided type fall arrester and work positioning device. • weight 188 g • for 11 mm textile ropes (recommended Singing Rock Static 11) • parking cam for blocking in required position • system of releasing LOCKER when loaded • unopenable version together with 11 mm sewn-in rope available as SITE - work positioning lanyard

length: 20 cm Connecting sling for connection of your harness and LOCKER (fall arrester).

unique number CE 0123 • EN 353-2 • EN 358

54

EN 354, CE 0123


SINGING_Working_2010_Sestava 1 5.3.2010 1:03 Stránka 55

PULLEYS

Pulleys of various construction for rescue activities or heavy weights lifting.

K6220BB

K6240BB

K6260BB

K6380BB

pulley small roll

pulley extra roll

pulley twin roll

tandem pulley

22 kN max. O / rope: 13 mm usage: textile rope sheave: light-alloy friction bearing weight: 94 g

32 kN max. O / rope: 13 mm usage: textile rope sheave: light-alloy roll bearing weight: 204 g

50 kN max. O / rope: 13 mm usage: textile rope sheave: light-alloy roll bearing Weight: 354 g

CE • EN 12278

CE 0639 • EN 12278

CE 0639 • EN 12278

25 kN max. O / rope: textile rope: 13 mm steel: 12 mm sheave: stainless steel roll bearing Weight: 270 g CE 0639 • EN 12278

MOBILE ANCHORING SYSTEM fine line • colour distinction of lengths • allows 2 persons movement • easy to adjust and manipulate • manpower sufficient for fastening when installing the system • ratchet does not damage webbing • available in three lengths (10, 15, 20 m) CE 1019 • EN 795 B

W1001WW10 W1001WW15 W1001WW20 W1002WS10 W1002WY15 W1002WO20

Fine line 10 (1) Fine line 15 (1) Fine line 20 (1) Fine line bag 10 (2) Fine line bag 15 (2) Fine line bag 20 (2)

(1)

(2)

S = 10 m M = 15 m

L = 20 m

55


SINGING_Working_2010_Sestava 1 5.3.2010 1:03 Strรกnka 56

WORKING & RESCUE

Photo: ActSafe archive

actsafe

56


SINGING_Working_2010_Sestava 1 5.3.2010 1:03 Stránka 57

®

ActSafe PME, 4-stroke

ACC POWER ASCENDER

Engine: Honda GX35 Type: Forced air-cooled, four cycle OHC, single cylinder Displacement: 35 cc Output: 1,6 HP Ignition: Transistorized magneto Spark: CMR5H (NGK) Carburetor: Diaphragm type Clutch: Centrifugal clutch Gross Weight: 10,5 kg Reduction ratio: 43:1 Fuel tank: 0,65 lit. Recommended fuel: > 95 octane unleaded gasoline Recommended engine oil: SAE 10W-30 Rope grab: Component parts of stainless steel (chromated) and aluminum. 4212 anodized, equipped with a “back stop” Lubrication: Grease Interflon LS ˝ Speed of ascent: 19 m/Min. with 200 kg load 11 m/Min. with 400 kg load (with two ropes)

Advantages with the ActSafe ACC power Ascender system The short set-up time involves that the work can be done in a manner that is quick, safe and less expensive than if performed with for example a sky lift. Clean and silent operation, ActSafe ACC is ideal for work and rescue indoors and in confined spaces. It is a light weight alternative to wire winches. The combination of the high lifting capacity and the sophisticated up/down control makes it perfect for lifting or dragging material and equipment. It is a versatile tool that can be used in places where it is impossible to use a sky lift or a powered platform.

Safe Working Load: 200 kg (SWL) Rescue: 250 kg Max load: 300 kg Standard approval: Certificates: The machine and the rope grab according to 98/37/EEC (machines), 89/686/EEC and 89/392/EEC, 91/368/EEC, 93/44/EEC, 93/68/EEC. CE-marked Carabiners according to EN12275 and EN362. CE-marked loops according to 89/686/EEC. CE-marked rope clamp according to EN567 (incl. The Emergency Kit). Recommended rope: Kernmantel rope / static / Ø 10 - 12 mm (11 mm is recommended), standard approved according to EN1891 and also approved for use by Act Safe Systems AB. - SINGING ROCK 11 mm

Technical Data Ropes: The standard rope grab system allows static / semistatic rope 10-13 mm EN1891. The tactical rope grab system allows ropes from 7 to 9 mm. Max Working Load: The Safe Working Load (SWL) is 200kg. When used in a rescue situation with properly trained personnel the total load must not exceed 250 kg. However, if the load superseeds 265 kg, the overload is monitored electronically and the power is automatically switched off. Ascent and Descent Speed: The speed of ascent and descent can be continuously adjusted from 0 to 22 meters per minute. Speed and direction is controlled with one hand, you have always one hand free. If the battery runs out of power during ascent or descent the emergency descender can be used in order to get down. The descent speed is approximately 0,5 m/s Battery Life Time: The normal life time of the battery is 800 to 1000 charging cycles. Temperature Range: -10 °C to + 40°C Weight: 18 kg including the internal battery. Dimensions: 40 x 30 x 25 [cm]

The ActSafe PME is the basic product in a working method developed by Act Safe Systems. The method, together with the machine and product knowledge, demands trained personnel.

57


SINGING_Working_2010_Sestava 1 5.3.2010 1:03 Stránka 58

WORKING & RESCUE

helmets C0049****

TERRA II light helmet for all climbing activities • universal size • fully adjustable • lightweight • well ventilated • four head lamp holders compatible with any headlamp from the market Weight: 270 g / 9.52 oz Size: 51 – 60 cm Material: shell: polycarbonate, foam: polystyrene Color options: C0049GW00 – TERRA II green C00490W00 – TERRA II orange C0049SW00 – TERRA II grey C0049BB00 – TERRA II black matt CE • EN 12492

X0033

KASK work helmet • Helmet with an innovative design, light,compact, comfortable and well ventilated thanks to 10 air intakes that keep the head cool at all times. Air intakes protected by an aluminium anti intrusion grille. • Provided with a fast, simple and effective size adjustment mechanism consisting of a wheel with a rubber grip on the back of the helmet. • The outer shell is high density and shock resistant. • The internal shell in HD polystyrene has ducts for air flow and recycling. • Provided with external lamp clips made of strong nylon, compatible with all helmet lamps available on the market. • Soft polyethylene headband, fixed to the external shell without rivets. • Inner padding consisting of two separate pieces, headband and disc, fully removable and hand or machine washable at 30°C. Non-allergic, cool, moisture wicking and odour resistant fabric. • Chinstrap with four fastening points at the back for a better fit. Fixed to the shell without rivets. Quick fastening and opening with a safety release system in compliance with EN 397. Provided with two soft polyethylene side retractors to regulate the length of the straps. • Provided with a ring to hook the helmet onto a harness. • May be fitted with the Kask visor VISIERA Plasma Work. Code: X0035 • Compatible with all Peltor ear defenders with P3A screw attachment. TECHNICAL DETAILS External shell: P.P. Polypropylene Internal shell: HD Polystyrene density 50 gr/l. Headband: PE Polyethylene. Size: Universal - adjustable from size 51 to 62. Weight: 380 gr. Lamp holder system: External nylon 6.6. luminescent clips Colours available for AQ series: White, red, blue, yellow. X0033AA00 X0033RR00 X0033WW00 X0033YY00 CE • EN 397

58

HELMET PLASMA WORK AQ blue HELMET PLASMA WORK AQ red HELMET PLASMA WORK AQ white HELMET PLASMA WORK AQ yellow


SINGING_Working_2010_Sestava 1 5.3.2010 1:03 Stránka 59

gloves

C0006HH

C0006BH

C0007BB

Grippy 3/4

Grippy

verve

Made out of quality leather. Reinforced palm area and lower part of finger area. Free ends of your fingers does not affect your sensibility and fine manipulation with your gear. Easy to put on thanks to special loop. Kevlar thread. Size: 8, 9, 10, 11

Made out of quality leather. Reinforced palm area. Closed fingers. Abbrasion resistant. Easy to put on thanks to special loop. Kevlar thread. Size: 8, 9, 10, 11

Made out of quality goatskin. Reinforced palm area - 50 % Kevlar and 50% Nomex material. This interlayer is barrier for heat. Backhand is lined by absorbing layer. Closed ends of gloves do not restrict to your fingers sensibility and fine manipulation with your gear. Size: 8, 9, 10, 11 C0008BB - WITHOUT PICTURE

VERVE

ACCESSORIES

gloves var. 3/4 fingers Size: 8, 9, 10, 11 C0011BBXX - WITHOUT PICTURE

VERVE short three fingers cutted Size: 8, 9, 10, 11

gear bag

Expedition bag

Made out of waterproof, durable and washable material. Super durable and very convenient, this bag takes up minimal space and stays dry. On the top there is transparent pocket for your documents in format A4. • intended for speleology and working at high • washable • minimum seams • main seams - HF welding • durable material • color: yellow and black Capacity: 35 and 50 l

TARP DUFFLE 70, 90 and 120 It’s not your average duffel bag…Made from a durable laminate material, the TARP DUFFEL is a bomber of a bag. Amply resilient to be roughed around in-flight, or to be transported up a mountain via a yak or off-road, this is one burly duffel bag. For trips lasting longer, grab the 90 litres size for ample room for your climbing gear.

S9000BB35 GEAR BAG 35 l black S9000YY35 GEAR BAG 35 l yellow S9000BB50 GEAR BAG 50 l black S9000YY50 GEAR BAG 50 l yellow

• Alpine-cut shoulder straps • Dual daisy chains • Twin haul handles on ends • Rugged construction with extra bartacks and double stitching • Four compression straps • Internal mesh pockets • Pocket on top Capacity: 70, 90 and 120 litres Color: black Weight: 1820 g (70 l), 2270 g (90 l) (±15g) Material: PVC C0046BB70 - 70 litres, black C0046BB90 - 90 litres, black C0046B120 - 120 litres, black

W0008BS00

TOOL BAG Hardware carrier and organizer • made of high resistant and durable fabric POLYMAR • inside and outside pockets for hardware • intended to be atached directly to the harness via carabiner or using additional waist belt • well arranged • easy to maintain • weight - 405 g • maximum load -10 kg • dimension - 23 x 23 x 9 cm carabiner is not included

59


SINGING_Working_2010_Sestava 1 5.3.2010 1:03 Stránka 60

WORKING & RESCUE

FALL ABSORBERS REACTOR 2 shock absorber • parts exposed to abrasion covered with a tubular webbing • shock absorber covered with a textile sheath. Shock absorber can be easily taken out and dried. • methodical and identification label is placed inside the textile cover

• light alloy ring enables to shorten a webbing in half • different webbing lengths are produced on customer's demand (maximum length including connectors and shock absorber cannot extend 2 m • possibility to stitch-in a connector (EN 362) • length of completely ripped out fall absorber 140 cm CE 1019 • EN 355

reactor 2 type shock absorber "I" 85 cm

"I" 155 cm

"Y" 85 cm

"Y" 155 cm

eye "Y" 155 cm

The fall absorber Joule presents optimal solution for securing persons working on horizontal constructions and roofs. Joule is activated after reaching the load of 2 kN (200 kg). Minimal guaranteed strength after the breaking action is 15 kN.

code W4220WW00 W4220WW00 W4230W085 W4231W085 W4232W086 W4233W087 W4230W155 W4231W155 W4232W155 W4233W155 W4240W085 W4241W085 W4242W085 W4243W085 W4240W155 W4241W155 W4242W155 W4243W155 W4250W155 W4251W155 W4252W155 W4253W155

connectors

K370 K353 K355 K370 K353 K355 K370 K353 K355 K370 K353 K355 K370 K353 K355

length inc. connectors

black version

max. 2 1,05 1,05 1,17 1,27 1,65 1,65 1,87 1,97 1,05 1,05 1,17 1,27 1,65 1,65 1,87 1,97 1,65 1,65 1,87 1,97

yes yes no no no yes no no no yes no no no yes no no no yes no no no

W4100Y120

JOULE 120 120 cm W4100Y160

JOULE 160 160 cm CE 1019 • EN 355

W4000B165

OCTOPUS Fall absorber integrated with lanyard • fall absorber integrated with lanyard • excellent absorbing behaviour (impact force 4,5 kN) • guaranteed load before activation 2,2 kN • minimum breaking strength after breaking action 15 kN • each product marked with its unique production number CE 1019 • EN 355

60


SINGING_Working_2010_Sestava 1 5.3.2010 1:03 Stránka 61

RescUE

W820OBY

W821OBY

W0005YBO9

Evacuation triangel SIT

Evacuation triangel COMBI

laika

Size: UNI EN 1498

with shoulder straps Size: UNI EN 1497, EN 1498

Only for rescue purposes. Only for rescue purposes.

Dog harness intended for transport of the dog from a helicopter • universal size • side light-alloy reinforcements • easy and quick fastening with vercro • max. load 150 kg

A0031BS00

A0051OS00

A0030YS00

pocket-knife

DANTE

rescue knife

with first class stainless steel blade Blade length 80 mm, one hand operation and safety lock of opened knife. Blade - stainless steel, plastic handle, stainless steel flexy clip. Weight: 83 g

pocket knife with first class toothed stainless steel blade Blade length 80 mm, one hand operation and safety lock of opened knife. Blade - stainless steel, orange plastic handle, stainless steel flexy clip. Weight: 83 g

with first class stainless steel ejection blade Blade length 80 mm and safety lock of opened knife. Special shape of the blade with the hook at the end for cutting of ropes or webbing. Other features: glass cutter, hammer for glass window breaking, opener of electrical cases - wrench. Blade - stainless steel. Stainless steel flexy clip • Weight: 196 g

K0004BB

EASY LIFT Color black matt Material body - light alloy, gate - stainless steel Max. diameter of rope steel rope max. 55 mm Sheave PA Strength 30 kN, working load 5 kN Weight: 1420 g Rescue pulley for progression and evacuation along ski lift cable. • to be connected directly to the carrying cable of ski lift • intended for evacuation of person during rescue action ATTENTION! • never use pulley alone - always use together with back-up lanyard • never use without braking rope For better traceability and inspection this part is marked with the unique number. CE 1015

W0003BY09

AXILLAR Rescue sling to secure evacuated persons against accidental fall during rescue action (e.g. ski lift evacuation). Weight: 355 g EN 1498 • typ A

61


SINGING_Working_2010_Sestava 1 5.3.2010 1:03 Stránka 62

WORKING & RESCUE

special DEVICES TRACTEL

A0057AP00

A0001SS38A0001SS64

A0045XX00

Evak 500

I - MOBILE

Pole perche 6 m

Rescue device The EVAK® 500 is a winch-hoist with unlimited length of textile rope and a lifting or pulling capacity of 500 daN. It has been specifically designed for use by the professionals of the emergency rescue services. It is a machine for lifting or pulling a person or materials by the to-and-fro movement of a lever linked to two self-gripping sliding jaw blocks.

mobile anchor point I - mobile follows user around the framework with a minimum of his intervention. Can be installed on the upper or lower soleplate and 1 user only can be connected. Two models: 1. 120 - 380 mm [A0001SS38] - weight 1500 g 2. 120 - 640 mm [A0001SS64] - weight 2000 gAdjustable from 120 mm to 640 mm. CE 0123 • EN 795B

6 m long pole. Enables the settings up of a lifeline from the ground or from safe place. Standard: CE, EN 795 class B Fibreglass pole With adapter for carabiner AM53 (A0046XX00) Rod: weight: 2,4 kg, dimensions: 2,40 m folded, 6,20 m unfolded Connector: weight 0,55 kg, gate opening (d) 53 mm

A0058XX00

Spare part Safety pin 500

A0034AA00

TRIPOD

62

Derope UP A

A0032WA20

Rescue device Thanks to their manoevering steering wheel, the derope® UP recovery descent devices enable the upward removal of a person that has fallen into a structure. They are equipped with a recall mechanism and rope clam cleat. Usage and descent speed are identical on descent devices only.

Rescue device The Derope KT is designed for evacuating people from a height limited to 40 m. Attaching more than one person on the descending end is prohibited. Self-trigger device.

derope kt

Adjustable telescopic feet with pivoting sole plate. Height: min. 1.74 m, max. 2.48 m Width: min. 1.10 m, max. 1.63 m Weight: 17 kg EN 795-B, EN 1496 Accessories: A0040AA02 - BLOCFOR 20 R With securing system. Cable length: 20 m.

Complies with the EN 341 and EN 1496 Standards.

A0040AA03 - BLOCFOR 30 R With securing system. Cable length: 30 m.

One person descent max. height 400 m - max. load 150 kg Two person descent max. height 125 m - max. load 225 kg

A0037BA02 (M20), A0037BA03 (M30) CAROL + CONSOLE Winch 250 kg 250 kg capacity. Available cable lengths of 20 and 30 m.


SINGING_Working_2010_Sestava 1 5.3.2010 1:03 Stránka 63

RETRACTABLE FALL ARRESTERS TRACTEL

BLOCFOR® 10, 20, 30 Retractable fall arrest system with 1020-30 m deal of freedom of movement. CE 0082 • EN 360

A0003AA

A0004AA

A0005AA

BLOCFOR® 2W

BLOCFOR® 5S

BLOCFOR® 6S

polyester webbing width 45 mm lenght: 2 m

polyester webbing width 20 mm + 2 carabiners lenght: 5 m aluminium casing

polyester webbing width 15 mm + 2 carabiners lenght: 6 m

CE 0320 • EN 360

CE 0320 • EN 360 CE 0320 • EN 360

We do all servis for Blocfors and the other devices what we sell. BLOCFOR® 10

BLOCFOR® 20

BLOCFOR® 30

cable

M46*

M47**

M46*

M47**

M46*

M47**

galvanized steel cable

A0010AA01

A0020AA01

A0010AA02

A0020AA02

A0010AA03

A0020AA03

stainless steel cable

A0011AA01

A0021AA01

A0011AA02

A0021AA02

A0011AA03

A0021AA03

aramid cord

A0012AA01

A0022AA01

A0012AA02

A0022AA02

A0012AA03

A0022AA03

For any other model or connector, please ask

* M46: automatic carabiner with fall indicator ** M47: automatic carabiner without fall indicator

Photo: Lukáš Neklan

63


SINGING_Working_2010_Sestava 1 5.3.2010 1:03 Stránka 64

kits

The list of equipment for ROPE COURSE or adventure parks 1 2 3 4 5 6 7 8 9 10 11 12 13 14

Lara Red block Body Unit Tarzan Plasma work, helmet (according EN 397) Terra 2, helmet (according EN 12492) Easy go lock Gloves Grippy 3/4 Steel oval 30 kN D steel connector / screw 50 kN TOP padded Brio Walter 10.4

Adventure park, Harrachov, Giant Mountains - Czech republic • photo: Vojtěch Watt Dvořák

64

1

2

3

4

5

6

7

8

9

10

11

12

13

14


SINGING_Working_2010_Sestava 1 5.3.2010 1:04 Strรกnka 65

The list of equipment for hanging and rescue 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29

1x Expert II 1x Helmet (according EN 397) 1x Gloves Grippy 1x Locker 2x Lift 1x Cam clean 1x Double stop 1x Franklin 1x Footer II complete 1x Jacob 1x Maillon mini oval 1x Maillon big delta 8x Oval carabiner TWL 2x Carabiner Hypnos 8x Steel oval carabiner 2x Pulley small 1x Pulley extra 1x Site 2 m + small connector 2x Static rope 11 mm, 50 m (diff. colors) 1x Accessory cord 6 mm, 2 m 1x Accessory cord 6 mm, 3 m 1x Accessory cord 6 mm, 5 m 4x Open sling 2x Eye sling 3x Lara 2x Steel lanyard "I" 1x Locker sling 1x Tool bag 1x Gear bag

1

2

3

4

5

6

7

8

9

10

11

12

13

14

15

16

17

18

19

20

21

22

23

24

25

26

27

28

29

4

EQUIPMENT FOR CHECKING OF PPE 1 2 3 4 5 6 7

E0013XX02 W1023 E0015XX00 E0016XX00 E0017XX00 E0018XX00 E0019X400

Wire (diameter 2 mm) Monty bag Marker of textile PPE Gas Hot Knife Sliding Gauge Measuring Tape (without picture) Silicon Based Lubricant (without picture) 8 E0020XX00 Illuminated magnifier 9 E0004GB00 Thermcutter 10 L9991WB Periodic control labels + plastic films (price per package) 11 E0014XX00 File (without picture)

1

2

3

8

9

10

5

65


SINGING_Working_2010_Sestava 1 5.3.2010 1:04 Stránka 66

intervention HARNESSES W0035BB

SIT WORKER standard sit harness – easy-lock buckles The new design is subsidized by perfect functionality, comfort and lightness. Fully adjustable sit harness for work positioning having two side attachment points and descender attachment point. Intended for activities without risk of fall. Wide padding provides rich back support. Large gear loops and indeed easy-lock buckles – these features make from sit worker ideal harness for every day users. Size: S, M/L, XL • Weight: (M/L) 1100 g (±15 g) • 38.8 oz. (±0,5 oz)

CE 1019 • EN 358 • EN 813

W0036BR

W0037BB

SIT WORKER speed

SIT WORKER steel

sit harness – SPEED buckles

sit harness – steel components + easy-lock buckles

W0044BB

EXPERT II standard full body harness – Easy-lock buckles Fully adjustable fall-arrest harness with padded waist belt, leg loops and shoulder straps. Also suitable for work positioning, descent, ascent and rescue service. Easy-lock buckles – these features make from expert ideal harness for all. • padded waist belt, leg loops and shoulder • specially shaped waist and legs • front and back tie-in points for fall-arrest (EN 361) • front lower attachment point for descender placement or work positioning (EN 813) • side attachment point for work positioning (EN 358) • 2 big plastic gear loops + 4 textile loops for tool bag mounting • the leg loops construction insure enough comfort in bark area • easy-lock buckles enable fluent and fast adjustment to fit to users body • flat rear attachment point does not bear on users back when carrying rucksack or breathing apparatus Size: S, M/L, XL • Weight: (M/L) 2200 g (±15 g) • 77.6 oz. (±0,5 oz) W0046BB W0045BB

EXPERT II speed full body harness • SPEED buckles enable fluent and fast adjustment to fit to users body Size: S, M/L, XL • Weight: (M/L) 2500 g (±15 g) • 88.18 oz. (±0,5 oz)

EXPERT II steel full body harness – steel components + easy-lock buckles • easy-lock buckles enable fluent and fast adjustment to fit to users body Size: S, M/L, XL • Weight: (M/L) 2300 g (±15 g) • 81.13 oz. (±0,5 oz) NFPA class III, ANSI Z359.1

CE 0123 • EN 358 • EN 813 • EN 361

66


SINGING_Working_2010_Sestava 1 5.3.2010 1:04 Stránka 67

speed SPEED buckles

STANDARD easy-lock buckles

steel

steel components + easy-lock buckles

W0041BB

PROFI WORKER standard full body harness – Easy-lock buckles Fully adjustable fall-arrest harness with padded waist belt, leg loops and shoulder straps. Also suitable for work positioning, descent, ascent and rescue service. Easy-lock buckles – these features make from profi worker ideal harness for all. Size: S, M/L, XL • Weight: (M/L) 1720 g (±15 g) • 60.67 oz. (±0,5 oz)

W0042BB

PROFI WORKER speed full body harness – SPEED buckles Size: S, M/L, XL • Weight: (M/L) 2030 g (±15 g) • 71.61 oz. (±0,5 oz)

W0043BB

PROFI WORKER steel full body harness – steel components + easy-lock buckles

CE 1019 • EN 358 • EN 813 • EN 361

Size: S, M/L, XL • Weight: (M/L) 1840 g (±15 g) • 64.9 oz. (±0,5 oz)

W0038BB

FLEX II standard full body harness Fully adjustable fall-arrest harness providing great comfort with reasonable weight. Without the shoulder padding it is ideal for workers or rescuers demanding balance between comfort and the weight of the harness. Wide padding provides rich back support. Large gear loops and indeed Easy-lock buckles - these features make from flex ideal harness for experts or rescuers. Size: S, M/L, XL • Weight: (M/L) 1540 g (±15 g) • 54.32 oz. (±0,5 oz)

CE 1019 • EN 358 • EN 813 • EN 361

67


SINGING_Working_2010_Sestava 1 5.3.2010 1:04 Stránka 68

INTERVENTION

harnesses W032BB03

BODY full body harness Fully adjustable fall-arrest harness with two attachment points in conformity with EN 361. Intended for working in places with the risk of fall. Harness is compact and light-weight, thus suitable for horizontal or inclined planes. It allows temporary hanging in. Size: S, M/L, XL L Weight: 1050 g (M/L) CE 1019 • EN 361

C5016BB

ZEAL ultimate big wall sit harness • ultra comfortable • reinforced tie-in points • haul loop • double waist belt - air circulation in rear area • rock&lock smart buckles • removable rear stretch straps • slots for placing additional material carabiners • BMI adjusting system • gear loops: 5 Size: S, M/L, XL Weight – M/L size: 630 g (±15 g) • 22,2 oz (±0,5 oz) CE • EN 12277 • UIAA

W0021BB

STRIKE working sit harness [intended for special forces] • padded waist belt (detachable) and leg loops • front attachment point (made of textile) for descender placement • 2 big gear loops • the leg loops construction insure enough comfort in bark area • quick released buckles enable fluent and fast adjustment to fit to users body • light-weight (580g - size M) • freedom of movement Size: S, M, L, XL CE 0123 • EN 813:97

68


SINGING_Working_2010_Sestava 1 5.3.2010 1:04 Stránka 69

W0022BB

Urban II. Sit harness for work positioning • anatomic waist belt and leg padding perfectly fits man anatomy • textile attachment point for work in hanging position, rappelling according to EN 813. • textile positioning points according to EN 358 are placed symmetrically, tested for 15 kN strength. 4 - buckle with a captive bar matches strict American standards (ANSI, CSA). No webbing slippage in a buckle. Its construction ensures longtime operation and efficiency (easy releasing and fastening even when dirty and tough webbing). Corrosion resistance is tested by salt spray test 48 hours. • braided gear loops with a bearing capacity of 10 kg provide enough space for 10 pieces of HMS carabiners. • additional loops with a bearing capacity of 5 kg offer additional space for the gear and better gear orientation. • slots designed for a secure hanging of expensive equipment (such as power saw, drilling machine,..) • identification and methodical label. To prolong its lifetime is advised to hide this label under the webbing.

• elastic strap with an adjustable buckle connecting leg loops with a waist belt. back centric positioning point according to EN 358. Size: S, M/L, XL Weight: M/L 850 g (±15g) EN 358, EN 813, CE 1019

C080BB

BRIO Our safety buckle system eliminates the possibility of bad strap lacing-through or total opening of the buckle. The Brio comes in new modern colour design with respect to maximum safety. The Brio one size fits to everybody who likes to get maximum safety at an outstanding price. One size Weight: 445 g CE 0123 • EN 12277 • UIAA

C101BB

BOBINGO chest harness Bobingo chest harness is designed to be used together with a sit harness, optimising body position while hanging or falling. One size • Weight: 240 g Use only in combination with sit harness!

69


SINGING_Working_2010_Sestava 1 5.3.2010 1:04 Stránka 70

INTERVENTION

SPECIAL ROPES

MILITARY: This collection of static ropes has been specially prepared for the use of police and army strike forces and other special units. If you require the best quality and a special design, MILITARY ropes are the best choice.

static R44 10,5

static R44 11

L0430BB black L0430KK khaki

L0450BB black

static 11 L0250BB black

static 10,5 L0230BB black L0230KK khaki

MILITARY

Force

Aramid

This excellent rope with low elongation and high static strength is designed for army and police. Rope diameters: 9, 10, 10.5, 11 and 12 mm

A special rope which makes use of a patented technology of combination of materials and the rope construction itself. A rope for use in extremely severe conditions (for instance rescuers, firemen, policimen and other special forces) due to its increased resistance to cutting.

Aramid rope 10 mm meets life safety rope requirements of NFPA 1983, standard on fi re service life safety rope and equipment for emergency services, 2006 edition. Rope with increased resistance to cutting and abrasion. Resistant to direct flame and radiant heat of up to 400 C for short period. Very often used for fast descending (rescue, police, military).

• Tendon electronic rope marking (TeROM) • Tendon compact ending • antistat • fireshield CE 1019 • EN 1891 • NFPA 1983 2006 EDITION static 10.5 • UIAA Packing: Coils: 30, 40, 50, 60, 70, 80, 100, 200 m Spools: 100, 200 m

Tested according to EN 1891 Type B (except material and marking). L100TF01S000C - 10 mm, black CE 1019 • Tested according to EN 1891 type B except material, marking and falls L110TF01S000C - 11 mm, black CE 1019 • Tested according to EN 1891 type A except material, marking and falls

L100TA01S000C - 10 mm, natural / black CE 1019 • Tested according to EN 1891 type B except material and marking, NFPA 1983 2006 edition L110TA01S000C - 11 mm, natural / black CE 1019 • EN 1891

Colours: black, green camouflage • Tendon electronic rope marking (TeROM)

3 table of parameters on page 79

70

Packing: Coils: 30, 40, 50, 60, 70, 80, 100, 200 m Spools: 100, 200 m

Packing: Coils: 30, 40, 50, 60, 70, 80, 100, 200 m Spools: 100, 200 m


SINGING_Working_2010_Sestava 1 5.3.2010 1:04 Stránka 71

SPECIAL ROPES SWAT

The top-quality and professional rope with maximum service life for rescue and security teams, from the MILITARY series, enables quick and safe landing of persons and their quick evacuation without the necessity of helicopter landing or using rapell device. SWAT is being successfully use by special forces in the Czech Republic, Poland and India. The members of the rapid deployment unit showed us also a new way of use of the quick-descent rope called SWAT. “They demonstrated that dismemberment from a helicopter is not the only application of the rope, but it can be used for abseiling from roofs of buildings with the utilization of the so-called selfanchoring or body-belay: one member of the team attaches the rope end to his full-body harness and, lying on the roof with legs rested against the roof edge, forms an anchor point for the rest of the team to be able to work safely under him in hanging position or to abseil down.

3 table of parameters on page 79

W1002BB

W810

Defender

rope protector

ESCAPE

Protects rope sheath against abrasion on rough surfaces and edges. Allows to put 2 ropes in. 80/120 cm • 32/48 in Material: Cortex

Protects rope sheath against abrasion on rough surfaces and edges. 50/70/100/120 cm • 20/28/40/48 in Material: PVC fabric

descending rope with textile sliced loop steel termination material: PA diameters: 44, 40, 32 mm

W0005BBO9

laika - black Dog harness intended for transport of the dog from a helicopter. • universal size • side light-alloy reinforcements • easy and quick fastening with vercro • max. load 150 kg

71


SINGING_Working_2010_Sestava 1 5.3.2010 1:04 Stránka 72

INTERVENTION

CARABINERS - BLACK LINE K0011BB00

K0010BB00

EXTASY STRAIGHT

EXTASY BENT

Robust, universal carabiner with key lock for easy clipping on gear loops and effortless handling. key lock, anodized

Robust, universal carabiner with bent gate for easy rope clipping. key lock, anodized

25 kN 8 kN 10 kN gate opening (d) 20 mm • 47 g • 1,65 oz. CE 1015 • EN 12275

25 kN 8 kN 10 kN gate opening (d) 20 mm • 47 g • 1,65 oz. CE 1015 • EN 12275

K4640BB

K4630BB

carabiner LOCK oval TWL with twist lock, black matt 24 kN 8 kN 7 kN gate opening (d) 19 mm • 80 g unique number CE 0639 • EN 362

carabiner LOCK oval screw gate with screw gate, black matt 24 kN 8 kN 7 kN gate opening (d) 20 mm • 74 g unique number CE 0639 • EN 12275 • EN 362

K0012BB00

K5420BB

EXTASY SCREW

HMS jumbo screw gate, black matt 22 kN 9 kN 8 kN gate opening (d) 25 mm • 93 g CE 0639 • EN 12275

Our smallest screw carabiner for all vertical activites. With screw gate, key lock, anodized 25 kN 8 kN 10 kN gate opening (d) 17 mm • 52 g • 1,82 oz. unique number CE 1015 • EN 12275 • EN 362

K0007BB00 black matt

K0008BB00

HYPNOS SCREW Light and compact HMS carabiner for belaying münter hitch or with tube. With screw gate, key lock, anodized 22 kN 7 kN 7 kN gate opening (d) 21,5 mm • 71 g • 2,49 oz. unique number CE 1015 • EN 12275 • EN 362

HYPNOS / TWL Light and compact HMS carabiner for belaying münter hitch or with tube. With twist lock, key lock, anodized 22 kN 7 kN 7 kN gate opening (d) 21,5 mm • 75 g • 2,63 oz. unique number CE 1015 • EN 12275 • EN 362

STEEL MAILLONS

72

K82006Z

K82008Z

K82207Z

K82310Z

K82210Z

maillon mini oval

maillon small oval

maillon small delta

maillon big D

maillon big delta

D 6 mm 4 kN gate opening 7,5 mm zinc-plated • 33 g

D 8 mm 25 kN gate opening 11 mm zinc-plated • 77 g CE 0082 • EN 12275 • EN 362

D 7 mm 4 kN gate opening 11 mm zinc-plated • 60 g

D 10 mm 25 kN gate opening 12 mm zinc-plated • 144 g CE 0082 • EN 12275 • EN 362

D 10 mm 25 kN gate opening 12 mm zinc-plated • 151 g CE 0082 • EN 12275 • EN 362


SINGING_Working_2010_Sestava 1 5.3.2010 1:04 Stránka 73

belay devices

K6021BB

K6031BB

K6170BB

K6132BB

figure 8 Medium

figure 8 Large

30 kN elox black matt 104 g

35 kN elox black matt 125 g

big figure eight

BUDDY

40 kN black matt 240 g

Buddy is light and compact belay tube. For all round climbers. Designed for ropes 7,8 - 11 mm mix color • 54g • 1,91 oz.

K6140BB00

SHUTTLE belay and rappel device One device to do it all, the Shuttle offers maximum versatility. It has a groove, designed and shaped to provide equal friction for both thin and thick ropes. When you’re belaying from above, the “guide mode” lets you bring up one or two seconding climbers under control. For lowering, it has a small secondary hole that you can clinch key lock carabiner for more leverage to release the device. • designed for twin, half and single ropes • lightweight and compact, only 65 g • V-grooves for high friction when belaying the leader or rappeling • self locking function when belaying the second • eye for releasing the weight • possibility of simultaneous belaying two climbers Weight: 65 g / 2.29 oz Rope diameter: 7.8 – 10.5 mm Material: Light alloy

PULLEYS

Pulleys of various construction for rescue activities or heavy weights lifting.

K6220BB

K6240BB

K6260BB

K6380BB

pulley small roll

pulley extra roll

pulley twin roll

tandem pulley

32 kN max. O / rope: 13 mm usage: textile rope sheave: light-alloy roll bearing weight: 204 g CE 0639 • EN 12278

50 kN max. O / rope: 13 mm usage: textile rope sheave: light-alloy roll bearing weight: 354 g CE 0639 • EN 12278

30 kN / rope: 13 mm max. O usage: textile rope sheave: light-alloy friction bearing weight: 94 g CE • EN 12278

25 kN / rope: max. O textile rope: 13 mm steel: 12 mm sheave: stainless steel roll bearing weight: 270 g CE 0639 • EN 12278

73


SINGING_Working_2010_Sestava 1 5.3.2010 1:04 Stránka 74

INTERVENTION

ANCHOR DEVICES AND LANYARDS

open sling 25 kN

eye sling 30 kN

sling lanyard 22 kN

sewed sling 20 mm

sewed sling made of two layers of strength strap wear indication

sewed sling made of two layers of strength strap wear indication

[cm]

[in]

kN

60

24

22

W2000B060

W2001B080

80

32

22

W2001B120

120

47

22

W2001B150

150

60

22

W2001B060

[in]

kN

60

24

22

W2015B080

80

32

22

W2015B120

120

47

22

W2015B150

150

60

22

[in]

kN

60

24

30

W2015B060

W2000B080

80

32

30

W2000B120

120

47

30

W2000B150

150

60

30

type

CE 1019 • EN 566 • EN 795B • EN 354

CE 1019 • EN 354 • EN 795B

CE 1019 • EN 354 • EN 795B

lanyard "I" 22 kN

lanyard "V" 22 kN

W232OWR

lanyard

lanyard [cm]

type

[in] kN

[cm]

[in]

kN

W2300B060

60

24

22

W2200B001

25/45 10/17 22

W2300B080

25/65 10/30 22

80

32

22

W2200B002

W2300B120 120

47

22

W2200B100 100/100 40/40 22

W2300B150 150

60

22

CE 1019 • EN 354 • EN 795B

74

[cm]

[cm]

type

CE 1019 • EN 354

type

anchor Lanyard "I" 22 kN type

anchor device lenghts on customer's request CE 0123 • EN 795B


SINGING_Working_2010_Sestava 1 5.3.2010 1:04 Stránka 75

W1024BX00

W1025BX00

FOOTER

FOOTER complete II.

ascender webbing without maillon Dimension: Min. length: 50 cm (19.7 in) Max. length: 150 cm (59 in) Weight: 145 g (5.11 oz.) Rock&Lock smart buckle (steel).

ascender webbing with maillon Dimension: Min. length: 50 cm (19.7 in) Max. length: 150 cm (59 in) Weight: 180 g (6.35 oz.) Rock&Lock smart buckle (steel).

ASCENDERS

SELF BRAKING DEVICES

Hand and chest ascenders for safe and smooth ascent

W1010BS09

locker Guided type fall arrester and work positioning device. • weight 188 g • for 11 mm textile ropes (recommended Singing Rock Static 11) • parking cam for blocking in required position • system of releasing LOCKER when loaded • unopenable version together with 11 mm sewn-in rope available as SITE - work positioning lanyard

K6400BB

CAM CLEAN / rope 8 - 13 mm • Size: UNI • Weight: 140 g O CE 0639 • EN 567

K6392BB

LIFT left O / rope 8 - 13 mm Size: UNI • Weight: 215 g CE 0639 • EN 567 K6391BB

LIFT right O / rope 8 - 13 mm Size: UNI • Weight: 215 g CE 0639 • EN 567

unique number CE 0123 • EN 353-2 • EN 358 W1015B020

locker sling length: 20 cm Connecting sling for connection of your harness and LOCKER (fall arrester). CE 0123 • EN 354

SELF BRAKING DESCENDER K030DSD30

K01000BB

DOUBLE STOP

descender indy

Descender with double locking and anti-panic system: self-breaking in case of accidental loss of descent control. Sensitive handle enables smooth descent without harmful rope twisting. Also suitable for works at a height and for emergency self evacuation. O / rope 11 mm Size: UNI • Weight: 340 g CE 0123 • EN 341

Descender with double locking and anti-panic system. EN 341 A O / rope 10 - 11mm / rope 10 - 13mm EN 12841 C O Size: UNI • Weight: 469 g CE 0426 • EN 341 A • EN 12841 C

Self breaking descenders for single rope with double locking system.

75


SINGING_Working_2010_Sestava 1 5.3.2010 1:04 Stránka 76

INTERVENTION

ACCESSORIES C0049BB00

TERRA II black light helmet for all climbing activities • universal size • fully adjustable • lightweight • well ventilated • four head lamp holders compatible with any headlamp from the market Weight: 270 g / 9.52 oz Size: 51 – 60 cm Material: shell: polycarbonate, foam: polystyrene Color options: C0049GW00 / TERRA II green C00490W00 / TERRA II orange C0049SW00 / TERRA II grey CE • EN 12492

W1001BB08

URNA Rope bag to be fastened on the user's leg. Max. length of the rope 50 m. Have your rope under control. Weight: 240 g Capacity: 11 l

gloves

76

C0007BB

C0008BB - without picture

verve

VERVE 3/4

Made out of quality goatskin. Reinforced palm area - 50 % Kevlar and 50% Nomex material. This interlayer is barrier for heat. Backhand is lined by absorbing layer. Closed ends of gloves do not restrict to your fingers sensibility and fine manipulation with your gear.

- gloves var. 3/4 fingers Size: 8, 9, 10, 11

Size: 8, 9, 10, 11

- three fingers cutted Size: 8, 9, 10, 11

C0011BBXX - without picture

VERVE short

W9001B***

W9000A***

Tactical gloves TUNDER nomex

Tactical gloves TUNDER kevlar

It’s a five fingers glove made from black Nomex textile and leather. Palm of the glove is made from goat skin with hydrophobic treatment. The palm is equipped with sophisticated reinforcement underlaid with Kevlar-Nomex felt. The glove finishes in knitwear of the same constriction as a dorsum of the glove.

It’s a five fingers glove made from dark blue Kevlar textile and leather. Palm of the glove is made from goat skin with hydrophobic treatment. The palm is equipped with sophisticated reinforcement underlaid with Kevlar-Nomex felt. The glove finishes in knitwear of the same constriction as a dorsum of the glove.

Size assortment: 7, 8, 9, 10, 11, 12

Size assortment: 7, 8, 9, 10, 11, 12


SINGING_Working_2010_Sestava 1 5.3.2010 1:04 Stránka 77

PROMOTIONAL C1013BB

T-shirts made of cotton, short sleeves classic round, lined neck Weight: 185 g Size: S, M, L, XL (man T-shirts) The T-shirts SINGING ROCK are very comfortable to wear.

C909

belt for throusers with Rock&Lock smart buckle This buckle is used on almost every harness from SINGING ROCK production. Size: M, XL

C0051HH00

baseball hat Size: One size fits all. Squared visor. Logotype in front. Website singingrock.com in back.

P0010X050 – 0.5 l P0010X030 – 0.3 l

PITCHER Classical beer pitcher 0.5 l or 0.3 l for all who likes climbing and all activities on our vertical playground.

P0012BB00

MUG Thermo cup with sturdy handle keeps your coffe or tea hot. Capacity: 350 ml (15,256 cu in) Weight: 250 g (8,82 oz.)

CLIMBERS ON BOARD & SINGING ROCK Stickers with adhesive side on its face. (intended for using on back windscreen of your climbing bark).

77


SINGING_Working_2010_Sestava 1 5.3.2010 1:04 Strรกnka 78

harnesses type of buckles

black version

code

size

pole

RL buckle

sit worker

standard

yes yes yes yes yes yes yes yes yes yes yes yes yes yes yes yes yes yes yes no no yes yes yes yes yes yes yes yes yes yes yes yes yes yes yes yes yes yes yes yes yes no no yes yes yes yes yes yes yes yes yes yes yes

W0030BR02 W0030BR03 W0030BR05 W0035BR02 W0035BR03 W0035BR05 W0036BR02 W0036BR03 W0036BR05 W0037BR02 W0037BR03 W0037BR05 W0022BR02 W0022BR03 W0022BR05 W0021BB02 W0021BB03 W0021BB04 W0021BB05 W0017OB03 W0022BR05 W0038BR02 W0038BR03 W0038BR05 W0041BR02 W0041BR03 W0041BR05 W0042BR02 W0042BR03 W0042BR05 W0043BR02 W0043BR03 W0043BR05 W0044BR02 W0044BR03 W0044BR05 W0045BR02 W0045BR03 W0045BR05 W0046BR02 W0046BR03 W0046BR05 W0033BY03 W0033BY05 W0050BR01 W0050BR05 W0320BB02 W0320BB03 W0320BR05 W5003BY02 W5003BY03 W5003BY05 W0032SY03 W0032SY05 W0200SY00

S M/L XL S M/L XL S M/L XL S M/L XL S M/L XL S M L XL M/L XL S M/L XL S M/L XL S M/L XL S M/L XL S M/L XL S M/L XL S M/L XL M/L XL XS-S M-XL S M/L XL S M/L XL M/L XL UNI

speed

steel

urban II.

standard

strike

speed

timber

RL buckle

flex II

standard

profi worker

standard

speed

steel

expert II.

standard

speed

steel

seamaster

mix

tarzan

steel

body

double buckle

ropedancer

78

double buckle

unit

double buckle

RL chest

RL buckle

weight M/L waist [cm/in] [g] 55-80 / 22-31 75-100 / 29-39 450 85-130 / 33-51 55-80 / 22-31 75-100 / 29-39 1100 85-130 / 33-51 55-80 / 22-31 75-100 / 29-39 1410 85-130 / 33-51 55-80 / 22-31 75-100 / 29-39 1220 85-130 / 33-51 55-80 / 22-31 75-100 / 29-39 1540 85-130 / 33-51 60-80 /24-31 70-90 / 28-35 570 80-100 / 31-39 90-100 / 35-39 70-100 / 28-39 1600 85-130 / 33-51 55-80 / 22-31 75-100 / 29-39 1540 85-130 / 33-51 55-80 / 22-31 75-100 / 29-39 1720 85-130 / 33-51 55-80 / 22-31 75-100 / 29-39 2030 85-130 / 33-51 55-80 / 22-31 75-100 / 29-39 1840 85-130 / 33-51 55-80 / 22-31 75-100 / 29-39 2200 85-130 / 33-51 55-80 / 22-31 75-100 / 29-39 2500 85-130 / 33-51 55-80 / 22-31 75-100 / 29-39 2300 85-130 / 33-51 75-100 / 29-39 1700 85-130 / 33-51 50-80 / 20-31 70-130 / 27-51 1530 1530

1280 1340

55-80 / 22-31 75-100 / 29-39 85-130 / 33-51

height m [cm]

leg loops [cm/in]

45-60 / 18-24 50-75 / 19-29 50-75 / 19-29 45-60 / 18-24 50-75 / 19-29 50-75 / 19-29 45-60 / 18-24 50-75 / 19-29 50-75 / 19-29 45-60 / 18-24 50-75 / 19-29 50-75 / 19-29 50-55 / 20-22 55-60 / 22-24 60-65 / 24-26 65-70 / 26-28 50-65 / 20-25 55-75 / 22-29 45-60 / 18-24 50-75 / 19-29 50-75 / 19-29 45-60 / 18-24 50-75 / 19-29 50-75 / 19-29 45-60 / 18-24 50-75 / 19-29 50-75 / 19-29 45-60 / 18-24 50-75 / 19-29 50-75 / 19-29 45-60 / 18-24 50-75 / 19-29 50-75 / 19-29 45-60 / 18-24 50-75 / 19-29 50-75 / 19-29 45-60 / 18-24 50-75 / 19-29 50-75 / 19-29 50-75 / 19-29 50-75 / 19-29 45-60 / 18-24 50-75 / 19-29

150-170 160-180 175-205 150-170 160-180 175-205 150-170 160-180 175-205 150-170 160-180 175-205 150-170 160-180 175-205 150-170 160-180 175-205 150-170 160-180 175-205 160-180 175-205 145-165 160-205 150-170 160-180 175-205 150-170 160-180 175-205 155-185 175-205 chest max. 125/49


SINGING_Working_2010_Sestava 1 5.3.2010 1:04 Stránka 79

dynamic ropes accord glory score duran wallter mania gemini

code

colour

L051 L051 LO32 L036 LO34 L035 L303 L302 L302

blue orange yellow green blue blue green red yellow

length diameter m mm 30, 40, 50, 60, 70, 100, 200 8,2 30, 40, 50, 60, 70, 100, 200 8,2 30, 40, 50, 60, 80 9,8 30, 40, 50, 60, 80 10,1 30, 40, 50, 60 10,4 30, 40, 50, 60 10,4 30, 40, 50, 60, 70, 100, 200 9,7 30, 40, 50, 60, 70, 100, 200 7,9 30, 40, 50, 60, 70, 100, 200 7,9

weight static elongation g/m 43 11% / 6,4% 43 11% / 6,4% 62 7,90% 66 7% 69 7,10% 70 7,10% 61 7,60% 39 8% /7,3% 39 8% /7,3%

dynamic elong. number of falls 33% / 34% 33% / 34% 36,30% 31,90% 31,30% 31,30% 37,50% 33% / 29% 33% / 29%

5 / 15 5 / 15 6 8 9 8 9 5 / 16 5 / 16

impact force kN 6,3 / 9,7 6,3 / 9,7 8,9 9,1 9,1 9,3 7,6 5,7/8,3 5,7/8,3

type half / twin half / twin single single single single single half / twin half / twin

static ropes singing rock static R44 10,5 static R44 11 static 9 static 10,5 static 11 contra 10.5

strenght kN 35,8 34,7 25,5 30,6 37,8 30

knot breaking force kN 22,3 20,3 14,5 19,3 24 24

static elongation % 3,4 3,2 3,5 3,3 3,3 2

number of falls

weight g/m 72 77 52,9 69 80 80

>15 >20 >8 >10 >20 >20

type A A B A A A

static ropes tendon static 13 reflective 11 military 9 military 10 military 10,5 military 11 military 12 aramid 10

strenght kN 48 40 23 34 38 40 44 30,9

knot breaking force kN 27 20 13 17 18 20 25 15

static elongation % 1,5 3,2 2,6 3,8 3,8 3,2 2,8 exception

number of falls 80 50 25 30 40 50 70 exception

weight g/m 109 79 50 67 73 79 90 64,8

aramid 11 force 10

40,3 24

15 12

3 2

18 exception

80 68

force 11

24,9

15

3,8

exception

84,3

timber 13 timber 15

23,7 40

15

3

11

115 120

type A A B A A A A A TYPE A according to EN 1891 (except 4.10 & 4.11) A Tested according to EN 1891 Type B (except material and marking) Tested according to EN 1891 Type A (except falls, impact force, knotability and material) A

speleo ropes speleo R44 10,5 speleo 10,5

strenght kN 35,6 29,2

CE • EN 1891 • UIAA

packaging speleo ropes: pack - 50, 60, 70, customer request • coil - 100, 200 m

Some notes: Type A rope - low stretch kernmantel rope designed for general use by persons in rope access including all kinds of work positioning and restraint; in rescue and in caving Type B rope - low stretch kernmantel rope of a lower performance than type A ropes, requiring greater care in use (standard does not content other specification)

knot breaking force kN 22,1 18

static elongation % 3,4 3,3

number of falls >15 >10

Static strength defined in the standard: 22 kN for the ropes of type A 18 kN for the ropes of type B Another standard requirement says, the material used for rope production shall have the melting point higher than 195°C, so polyethylene or polypropylene are not suitable

weight g/m 72 69

Rope elongation The rope elongation shall not be higher than 5%, tested by loading the rope for 3 min with 150kg load (pretension 50 kg) Dynamic performance Fall test with two meters long rope terminated with figure-eight knots; fall factor 1. The testing mass 100 kg for type A ropes, 80 kg for type B ropes.

79


SINGING_Working_2010_Sestava 1 5.3.2010 1:04 Stránka 80

SWAT (PA BRAIDED ROPES) Rope diameter, pre-tensioned according to EN ISO 2307 (245 kg) Rope diameter, loose (zero tension) Rope weight, pre-tensioned according to EN ISO 2307 (245 kg) Rope weight, loose (zero tension) Minimum rope strength with spliced eye Minimum rope strength with steel termination Minimum strength of suspension sling (ESCAPE) Rope elongation, pre-tensioned according to EN ISO 2307 (245 kg)

44 mm 50 mm 77 kg / 100 m 96 kg / 100 m 12 000 kg 3 000 kg 2 500 kg 25%

40 mm 46 mm 60 kg / 100 m 75 kg / 100 m 10 000 kg 3000 kg 2 500 kg 25%

32 mm 38 mm 42 kg / 100m 52 kg / 100m 7 500 kg 2 500 kg 25%

accessory ropes COIL L0004 L0005 L0006 L0007 L0008 PACK L0004XX01 L0005X006 L0006X006 L0007X006 L0008X006 CE 0123 • EN 564

diameter mm 4 5 6 7 8

weight g/m 11,8 17,1 22,0 33,7 45,2

strenght kN 5 6 8 12 15

length m 100 100 100 100 100

ft 328 328 328 328 328

4 5 6 7 8

11,8 17,1 22,0 33,7 45,2

5 6 8 12 15

10 6 6 6 6

32,8 19,7 19,7 19,7 19,7

carabiners code HYPNOS screw HYPNOS screw HYPNOS TWL HYPNOS TWL VISION straight VISION bent EXTASY bent EXTASY bent EXTASY straight EXTASY straight EXTASY screw EXTASY screw EXTASY wire straight EXTASY wire bent D steel screw D steel triple lock Oval steel screw Oval steel triple lock Oval screw Oval screw Oval TWL Oval TWL HMS Jumbo D big screw gate D bar screw gate D bar twist lock LARGO screw LARGO triple lock

80

colour / surface

K0007EE00 K0007BB00 K0008EE00 K0008BB00 K0009EE00 K0025EE00 K0010EE00 K0010BB00 K0011EE00 K0011BB00 K0012EE00 K0012BB00 K0013EE00 K0020EE00 K4080ZO K4081ZO K4241ZO K4241ZO07 K4630PP K4630BB K4640PP K4640BB K5420PE K5070PP K4280PP K4290PP K0014EE00 K0015EE00

elox black elox Black elox elox elox black elox black elox black elox elox zinc-plated zinc-plated zinc-plated zinc-plated elox black elox black elox elox elox elox elox elox

material light alloy light alloy light alloy light alloy light alloy light alloy light alloy light alloy light alloy light alloy light alloy light alloy light alloy light alloy steel steel steel steel light alloy light alloy light alloy light alloy light alloy light alloy light alloy light alloy light alloy light alloy

EN12275 sport • • • • • • • • • • • • • •

• • • • • •

EN362 work • • • •

• •

• • • • • • • • • • • • •

major kN 22 22 22 22 25 25 25 25 25 25 25 25 25 25 50 50 30 30 24 24 24 24 22 30 30 30 22 22

minor kN 7 7 7 7 7 7 8 8 8 8 8 8 8 8 13 13 9 9 10 10 8 8 9 8 9 9 8 8

open gate kN 7 7 7 7 8 8 10 10 10 10 10 10 10 10 20 20 8 8 7 7 7 7 8 9 11 11 8 8

opening mm 21,5 21,5 21,5 21,5 19 19 20 20 20 20 17 17 22 22 25 25 17 17 20 20 19 19 25 26 19 19 30,5 30,5

weight g 71 71 75 75 33 33 47 47 47 47 52 52 43 43 255 267 176 195 74 74 80 80 94 88 80 80 100 104

weight oz 2,485 2,485 2,625 2,625 1,155 1,155 1,645 1,645 1,645 1,645 1,82 1,82 1,505 1,505 8,925 9,345 6,21 6,87 2,61 2,61 2,82 2,82 3,32 3,1 2,82 2,82 3,53 3,66


SINGING ROCK was founded in 1992. Within its existence Singing Rock has established itself as a professional and innovative producer and supplier of personal fall protective equipment. Singing Rock specializes in: • Development and production of climbing and mountaineering equipment (harnesses, mountaineering ropes, belay and rappel devices and carabiners) • Development and production of professional equipment for working in height (harnesses, ropes, connectors, anchor devices, lanyards and fall absorbers)

Photo: Vojtěch Watt Dvořák

SINGING_Working_2010_Sestava 1 5.3.2010 1:04 Stránka 81

The program was subsequently extended to the supply of complex solutions for working in height and rescue: • Methodology and preparation of rope access and secure anchor systems • Supply or development of suitable safety equipment • Training services • Follow-up service - regular product inspection All activities at Singing Rock run under QMS certification according to ISO 9001 standards with special attention to development, production and sales of Personal Fall Protective Equipment. (Article 11B of Council Directive 89/686/EEC). Singing Rock products fulfil appropriate EU directives and standards and requirements of US market (CE, NFPA and ANSI). Singing Rock actively participates in preparation of said standards and directives by its work in the UIAA Safety commission and CEN working group. Singing Rock also cooperates with Czech standardization bodies as an expert in the field of standards for personal protective equipment.

www.singingrock.com 81


SINGING_Working_2010_Sestava 1 5.3.2010 1:04 Stránka 82

Permanent fastening systems All the system components are made from stainless steel, steel with surface treatment or aluminium, which assures high endurance of the system against the atmospheric influence. Durability of the system is limited by durability of the building, regularity of checks and service. WHO ARE THE PFS FOR? PFS are designed for: high and administrative buildings, schools, depots, docks, mining machines, hangars, silos, storage and factory buildings, fair palaces, shopping and sport centres, traffic terminals and many other buildings and facilities whose serviced is performed by human labour force. ADVANTAGES

Photo: Petr Pavlíček

PFS are light systems which do not overload carrying elements of buildings and structures.

INTRODUCTION OF THE SYSTEM Permanent fastening systems (PFS) function, above all, as the systems of preventive and active protection to the users who are in danger of caving in, sliding or falling to depth. PFS is preventive as well as active protection against falling for its users. It makes it possible for its users to move safely, adjust its position, ascend or descend, hang and do any other activities associated with their work.

irata

PFS is designed and constructed to catch a potentially falling user, which is done safely and in accordance with valid safety regulations of Czech Republic and European Union.

Durability of the PFS can be determined according to the durability of the building or structure on which they are placed. Handling the PFS is intuitive and easy. Every trained user is able to handle it routinely.

PFS can differ from each other depending on their type (vertical, horizontal etc.), design (cable, rail), utilization (adjusting position, hanging etc.), estimated number of users (at least 2 persons, maximum according to the investor’s demand or according to the capacity of the carrying structure, wall, attic etc.). It is therefore absolutely necessary to train the users before first using the system and also to make them familiar with the plan of operation and plan of evacuation.

All parts of the PFS can be replaced.

The SINGING ROCK company is associate member of IRATA under number 101 since October 2009.

by IRATA members. By the end of 1997, members had recorded nearly four million man-hours of work on ropes with an incident rate of less than three per 100,000 hours.

IRATA, the Industrial Rope Access Trade Association, was formed as a result of an initiative by a number of leading companies involved in industrial rope access techniques. The association’s main aim is to promote the development of rope access techniques and to ensure that its members work in a safe and effective manner. Full members of the association are subject to stringent entrance qualifications and audit to ensure that they meet IRATA’s requirements for quality assurance, safety, training and working practices. The benefits of these procedures and requirements are reflected in the very low level of accidents reported

82 82

PFS are appropriate anywhere where the workers need to be fastened and where mobile footbridges, cranes or other handling and lifting devices would be expensive (concerning their operation as well as expenses), too heavy, and where their appearance would disturb the appearance of the building.

Virtually all these accidents or incidents were so minor that they were not reportable under the Reporting of Injuries, Diseases and Dangerous Occurrences Regulations (RIDDOR). Safety is paramount in our industry. Since its formation IRATA, and its member companies, have worked assiduously to: • improve safety in the industry. • produce an industry standard set of guidelines and training requirements. • provide a comprehensive assessment and registration process for operatives.


SINGING_Working_2010_Sestava 1 5.3.2010 1:04 Stránka 83

Technical description • capacity of internal room for training (incl. classroom) 1512 m3 • tract of internal room for training (incl. classroom) 240 m2 • max. height: 9.4 m internal room • max. height: 13.5 m external room List of activities (internal) • inclinable roof (inclined plane) • stage construction • garner / confined spaces • elevated platforms • steel cross-beams • tree • scaffolding • telecommunication antenna • sewerage system (opening spring 2010)

Photo: Lukáš Neklan

The company Singing Rock, decided to establish multifunction polygon with the multimedia classroom as the first one in the Czech Republic in order to improve the level of the rope access work training. After gathering some information and experience from other countries in which such training polygons are commonly used, the working team was set up to ensure the preparation and implementation of this facility. The training POLYGON in Poniklá involves wide range of simulated situations such as: move on the roof with a variable declension, a tree, antenna masts, silo, scaffolding, high voltage masts and other construction suitable for practicing of working at a height.

www.singingrock.cz/polygon

foto: Vojtěch Watt Dvořák

List of activities (external) • lattice-work mast – transformer (8.5 m) • lattice-work mast – high voltage (14.4 m) • chair lift (opening spring 2010)

83


SINGING_Working_2010_Sestava 1 5.3.2010 1:04 Stránka 84

SINGING ROCK WORKING RESCUE INTERVENTION

Catalogue SINGING ROCK 2010, ver. 002/EN – working equipment SINGING ROCK – All rights reserved. Technical specifications may change without notice. Printed in Czech republic in March 2010. Design & print: www.hrg.cz

Warning: Activities at height such as climbing, via ferrata, caving, rappelling, ski-touring, rescue, work at height and exploration are dangerous activities, which may lead to severe injury or even death. Thus the following is essential before use: careful reading and understanding of the instructions for use acquaintance with the possibilities and limitations of the product adequate apprenticeship in appropriate techniques and methods of use understanding and acceptance of the risk involved. In case of doubt or problem of understanding, contact SINGING ROCK.

Singing Rock Poniklá 317 CZ-512 42 Poniklá e-mail: info@singingrock.com tel.: +420 481 585 007 fax: +420 481 540 040 Czech Republic, Liberec • Photo: Nathan Smith (USA), pullphotography.com

www.singingrock.com


Catálogo Singing Rock