Page 75

STEELART

Technical information

Bowls and sinks with or without tap ledge 550 series 8 S models BLANCO JARON

BLANCO CLARON 0-IF A, BLANCO CLARON XL 60-IF BLANCO CLARON 8 S-IF BLANCO CLARON 0-T-U BLANCO ZEROX 550-IF/A BLANCO ZEROX 550-IF BLANCO ERO 0-U BLANCO ZEROX 8 S-IF BLANCO ERO 0-T-U BLANCO JARON XL 6 S-IF

Worktop thickness on IF models and sinks

BLANCO FLOW-IF BLANCO CLARON-IF/A BLANCO ZEROX-IF/A BLANCO JARON XL 6 S-IF

0-IF,

0-U

If fitting a BLANCO JARON or 550 series in a 60-cm wide base cabinet, the side panels will have to be cut out. If fitting an 8 S model in an 80-cm wide base cabinet, the side panels will have to be cut out. If fitting a 550 T model in a 30-cm wide base cabinet, the side panels will have to be cut out.

IF models with an integrated tap ledge can only be used with worktops of 30 mm thickness or more. BLANCO JARON XL 6 S-IF can only be used with worktops of 40 mm thickness or more.

Taps mounted on IF models with tap ledge

On all models with an integrated tap ledge, the mixer tap must be positioned as shown here: – Single and double bowls: in the left-hand tap hole – Sink main basin on the right: in the left-hand tap hole – Sink main bowl on the left: in the right-hand tap hole

Taps mounted behind the overflow

Warning! The following products cannot be mounted behind the overflow: – Mixer tap BLANCO PERISCOPE-S-F II, BLANCO ELOSCOPE – BLANCO soap dispenser, e.g.: – BLANCO UADRIS – BLANCO LE OS – BLANCO PIONA – BLANCO TORRE

Special drill holes on IF models

On all IF models with a tap ledge, the number and position of tap drill holes can be chosen to suit. That is to say, drill holes may be positioned individually on the tap ledge. The number is variable. The delivery time for IF designs with special drill holes is 2 weeks. Surcharge per sink: Please state “with special drill hole” in your order and attach a drawing showing the exact positioning. www.blanco-germany.com/steelart-konfigurator

Cut-out on IF models with C-overflow™

If fitting the models BLANCO CLARON-IF and -ZEROX-IF with C-overflow™, the worktop will have to be cut out accordingly. You will find detailed dimensions and drawings for the various models with the cut-out details on the Internet at www.BLANCO-steelart.com or at www.blanco-germany.com View of flushmount installation

View of installation from above

View of cut-out from above

You will find the cutting-out details for every installation method in our Internet download area. 75

SteelArt_Asien_2017.indd 75

09.11.16 15:11

Profile for Dexterton

Blanco - Main Catalogue Asia 2017  

Blanco - Main Catalogue Asia 2017

Blanco - Main Catalogue Asia 2017  

Blanco - Main Catalogue Asia 2017

Profile for dexterton
Advertisement