Page 1

79 Trenton Avenue Frenchtown, NJ 08825

www.designplan.com

Tel: (908) 996-7710 Fax: (908) 996-7042


CHIARA

67

• Round luminaire for installation on wall or ground –

recessed.

• Configuration: die-cast aluminum structure, EN AB-47100

alloy (low copper content) and AISI 316L blasted stainless steel frame. Glass diffuser: Sandblasted with silkscreen border, fixed to the aluminum body through a robotic gluing system. • Double layer coating for high resistance to corrosion: the aluminum components are painted with a double coat using powders which are compliant with QUALICOAT standards: a first layer of epoxy powder (with excellent chemical and mechanical resistance) and a second finishing layer of polyester powder (resistant to UV rays and atmospheric agents). The entire painting process of the aluminum fitting starts from components which have been sandblasted in advance to make the surface more porous and increase the adherence of the paint. Ares effects alkaline and acid washing to clean the surfaces completely, then rinses with demineralised water to remove any residue particles, subsequently a chemical conversion treatment is done to protect against rusting. • Protection rating: IP67 • Installation: the luminaire is equipped with a piece of cable for an easy-to-make connection. 24V version: the cable is integrated with an H2O STOP device. Outdoor use requires suitable flexible cables. Installation requires a dedicated box to be ordered separately. It is important to provide a >7.87" gravel layer or a drain system (for concrete surface) to ensure good drainage and to avoid water stagnation.

VERSION: lass A/A+/A++ uminaire supplied ith integrated LED modules at cannot be replaced

.0 Inox

Recessed ground fitting

Recessed wall fitting

Pre-wired with approx 9.84" of cable.

Protection against water ingress from the cable H2O STOP

Do not install in hollow areas

Installation requires a 0.79" water drainage layer (gravel)

Glass surface temperature <158°F

Protection against impact. IK 08 - 5.00 joule

Remote device required for 24V version

Chiara

Ib

Static load: 1102.31 lbs walk over

Designplan | Ares


Chiara Mid-Power LED / Stainless Steel Frame - Sandblasted Glass - 24Vdc

A A A U530009 NATURAL WHITE 4000K MID-POWER LEDs 3.5W/24Vdc Total power 4W lm LED 380 ≠ lm OUTPUT 200 CRI>80 +

++

240

120˚

Fc Med 0.09 0.09 0.19 0.28 1.30

cd / 1000 lm C0 / C180

C90 / C270

= 60.0˚+ 60.0˚

= 60.0˚+ 60.0˚

A A A U530010 WARM WHITE 3000K MID-POWER LEDs 3.5W/24Vdc Total power 4W lm LED 360 ≠ lm OUTPUT 190 CRI>80

0.08"

+

2.09"

Fc Max 0.19 0.19 0.56 1.21 5.02

90˚

Remote electronic power supply to be ordered

Ø 5.12"

ft 16.40 13.12 9.84 6.56 3.28

MID-POWER LED

++

Remote electronic power supply to be ordered

Chiara Mid-Power LED / Stainless Steel Frame - Sandblasted Glass - 24Vdc

A A A U530005 NATURAL WHITE 4000K MID-POWER LEDs 6.5W/24Vdc Total power 7.3W lm LED 734 ≠ lm OUTPUT 394 CRI>80 Remote electronic power supply to be ordered +

0.08"

2.09" Ø 5.12"

ft 16.40 13.12 9.84 6.56 3.28

400

120˚

Fc Fc Max Med 0.65 0.19 1.02 0.37 1.86 0.65 4.18 1.39 16.82 5.57

90˚ cd / 1000 lm C0 / C180

C90 / C270

= 48.0˚+ 48.0˚

= 46.0˚+ 46.0˚

A A A U530006 WARM WHITE 3000K MID-POWER LEDs 6.5W/24Vdc Total power 7.3W lm LED 707 ≠ lm OUTPUT 308 CRI>80 Remote electronic power supply to be ordered +

MID-POWER LED

++

++

Chiara

Designplan | Ares


Accessories: Chiara U50 BOX FOR INSTALLATION Ø 6.30" H 2.76"

2.76"

Ø 4.53"

Ø 6.30"

acc. code

U50

prod. code

U530002 U530003 U530005 U530006 U530007 U530008 U530009 U530010

Chiara

117

Chiara  

Ultra shallow LED in grade uplight