Issuu on Google+

WALL LUMINAIRES


Calcyt

®

Plaster with a high density and purity

"BRICK IN THE WALL® " developed it's own CALCYT® plaster with amazing characteristics.  CALCYT® is a high density, heat resistance, next generation plaster, with optimal hardness and light reflexion properties.  Our continuous research results in the production of CALCYT® fixtures without air holes, assuring no cracks after installation.  Due to it's thermal resistance,CALCYT® fittings are suitable for many different light sources. The snow white CALCYT® fixtures can easily be painted in the colour of your wall or ceiling ! This facilitate the seamless integration of our bordeless CALCYT® fixtures into each and every interior. CALCYT® is a registered trade mark of BRICK IN THE WALL®


Atmos

4

Small

34

Expression

8

Normall

38

Impression

14

Big

44

Wave

18

XT

48

Move Out

20

Moor

50

Move In

26

Slim

30

1RWH All cutout dimensions are approxmate. Use plaster kit as template.


The ATMOS creates a pattern of movement by emitting a ray of light from an incision in the architecture. The seamless plaster fixture can be installed as a wall-washer with the light beam at the top or the bottom. Soft, undulating wave shapes exiting and entering the wall give the architect an unlimited freedom. The Atmos is foreseen with a special designed printed circuit board for the new generation of the ‘Rebel’ led with integrated electronics, to obtain a maximum light output with an optimal heat release. The shape ensures perfect light distribution. The use of colored LEDs allows the architect to personalize his project. ETL listed class II. Requires remote 350mA power supply. The Atmos can be directly installed in a brick wall or in gypsum by means of an optional plaster kit.

4

|

designplan/BRICK IN THE WALL

D ESIGN BY C ARL DEV OLDER

ATMOS


ATMOS

19.84”

19.84”

REF. N° : 145 29 100 : 3000°K REF. N° : 145 29 000 : 2700°K REF. N° : 145 29 500 : 2200°K

2.4”

1x Luxeon Z-ES LED 350mA - 7W. Power supply not included (see cutsheet). Cutout 19.84” x 19.84” listed IP20.

For direct mounting in solid walls or in gypsum walls by means of an optional plasterkit (Ref. N° 745 01 000). Colour : paintable plaster Equipped with a clear acrylic lens. Can be installed with the LED’s at the top or bottom Other colours available on request Requires remote 350mA power supply

ATMOS PLASTERKIT ”

19.84

REF. N° : 745 01 000 For mounting into gypsum walls Cutout 19.84” x 19.84” Housing : perforated aluminium

19.84” 2.4

designplan/BRICK IN THE WALL

|

5


6 |

designplan/BRICK IN THE WALL


designplan/BRICK IN THE WALL

|

7


EXPRESSION

D ESIGN BY C ARL DEV OLDER

The Expression has an innovative design language of its own. It can be combined with the Impression to create beautiful wave shapes fading in and out of the architectural space. A structured polycarbonate cover provides an optimal light distribution. The Expression is available in ‘Mono’ version, used as an up or down light, or in ‘Duo’ version (both up and down light). The combination of both versions gives the architect unlimited freedom. The Expression can be directly installed in a brick wall or in gypsum by means of an optional plaster kit.

8 |

designplan/BRICK IN THE WALL


EXPRESSION MONO T5 21 39W T5HO ”

.61

3.54” 3.15”

3.15”

4.33”

49

3.15”

4.33”

.79

50

REF. N° : 318 15 021 ( ADD SUFFIX FOR WATTAGE, 21 OR 39) 1× 21W T5 or 1x 39W T5HO specify wattage (lamp by others) Integral electronic universal voltage ballast 120V-277V. ETL listed Cutout 49.61” x 4.33”

EXPRESSION MONO T5 21 39W T5HO DIM ”

.61

3.54” 3.15”

3.15”

4.33”

49

3.15”

4.33”

.79

50

REF. N° : 318 18 021( ADD SUFFIX FOR WATTAGE, 21 OR 39) 1× 21W T5 or 1x 39W T5HO specify wattage (lamp by others) Integral electronic dimming ballast 120V or 277V. Specify voltage. ETL listed Cutout 50.79” x 4.33”

For direct mounting in solid walls or in gypsum walls by means of an optional plasterkit (Ref. N° 718 01 000). Colour : paintable plaster - lampunit : galvanized steel Optional laminated colour cover on request (Ref. N° 518 01 005) Can be installed with the opening at the top or bottom

EXPRESSION PLASTERKIT REF. N° : 718 01 000 For mounting into gypsum walls Cutout 50.94” x 4.49” Housing : perforated aluminium

4”

50.9

4.49”

3.58

designplan/BRICK IN THE WALL

|

9


EXPRESSION DUO 21WT5 or 39W

T5HO

” 4.33”

.61

3.54” 3.15”

3.15”

4.33”

49

3.15”

.79

50

REF. N° : 319 15 021 ( ADD SUFFIX FOR WATTAGE, 21 OR 39) 1× 21W T5 or 1x 39W T5HO specify wattage (lamp by others) Integral electronic universal voltage ballast 120V-277V. ETL listed Cutout 50.79” x 4.33”

EXPRESSION DUO 21WT5 or 39W

T5HO DIM ”

.61

3.15”

4.33”

49

REF. N° : 319 18 021 ( ADD SUFFIX FOR WATTAGE, 21 OR 39) 1× 21W T5 or 1x 39W T5HO specify wattage (lamp by others) Integral electronic dimming ballast 120V or 277V. Specify voltage. ETL listed Cutout 50.79” x 4.33” For direct mounting in solid walls or in gypsum walls by means of an optional plasterkit (Ref. N° 718 01 000). Colour : paintable plaster - lampunit : galvanized steel Optional laminated colour cover on request (Ref. N° 518 01 005) Can be installed with the opening at the top or bottom

10 |

designplan/BRICK IN THE WALL

3.15”

4.33”

.79

50

3.54” 3.15”


designplan/BRICK IN THE WALL

|

11


12 |

designplan/BRICK IN THE WALL


designplan/BRICK IN THE WALL

|

13


IMPRESSION

DESIGN BY C ARL DEV OLDER

Transform your interior with the Impression. The basic idea of the Impression (possibly in combination with the Expression) is to create unexpected and inspiring plaster fixtures with light and shape as a true amalgam with the architecture. The Impression can be used with the lamp at the top or at the bottom. Optional laminated colour covers give a personal touch and accent to your interior. The Impression can be directly installed in a brick wall or in gypsum by means of an optional plaster kit.

14 |

designplan/BRICK IN THE WALL


IMPRESSION 21/39

21WT5 or 39WT5HO 3.7

7.13”

3.15”

3.15” 7.13”

3.39” 3.15”

4”

3.74”

.79

50

REF. N° : 317 15 021 (ADD SUFFIX FOR WATTAGE, 21 OR 39) 1× 21W T5 or 1x 39W T5HO specify wattage (lamp by others) Integral electronic universal voltage ballast 120V-277V. ETL listed Cutout 50.79” x 713”

IMPRESSION 21/39

21WT5 or 39WT5HO DIM 3.7

7.13”

3.15”

3.15” 7.13”

3.39” 3.15”

4”

.79

50

3.74”

REF. N° : 317 18 021 ( ADD SUFFIX FOR WATTAGE, 21 OR 39) 1× 21W T5 or 1x 39W T5HO specify wattage (lamp by others) Integral electronic dimming ballast 120V or 277V. Specify voltage. ETL listed Cutout 50.79” x 7.13”

For direct mounting in solid walls or in gypsum walls by means of an optional plasterkit (Ref. N° 717 01 000). Colour : paintable plaster - lampunit : galvanized steel Optional laminated colour cover on request (Ref. N° 517 01 005) Can be installed with the opening at the top or bottom

IMPRESSION PLASTERKIT REF. N° : 717 01 000 For mounting into gypsum walls Cutout 50.94” x 7.28” Housing : perforated aluminium

50.94”

7.28” 3.78

designplan/BRICK IN THE WALL

|

15


16 |

designplan/BRICK IN THE WALL


designplan/BRICK IN THE WALL

|

17


WAVE

D ESIGN BY C ARL DEV OLDER

The Wave reveals itself by emitting a ray of light out of the wall. This seamless plaster fixture can be installed as a wall-washer with the lamp at the top. The luminaire can be also used to illuminate circulation zones. An optional laminated colour cover allows the architect to personalize his project. The Wave can be directly installed in a brick wall or in gypsum by means of an optional plaster kit.

18 |

designplan/BRICK IN THE WALL


designplan/BRICK IN THE WALL

|

19


20 |

designplan/BRICK IN THE WALL


WAVE 14WT5 or 24WT5HO

.1”

11.22”

26

.28

27

REF. N° : 316 15 024 (ADD SUFFIX FOR WATTAGE, 14 OR 24) 1× 14W T5 or 1x 24W T5HO specify wattage (lamp by others) Integral electronic universal voltage ballast 120V-277V. ETL listed Cutout 27.28” x 11.22”

9.84”

11.28”

2.24”

2.76”

WAVE 14WT5 or 24WT5HO DIM

.1”

11.22”

26

.28

27

REF. N° : 316 18 024 ( ADD SUFFIX FOR WATTAGE, 14 OR 24) 1× 14W T5 or 1x 24W T5HO specify wattage( lamp by others) Integral electronic dimming ballast 120V or 277V. Specify voltage. ETL listed Cutout 27.28” x 11.22”

9.84”

11.28”

2.24”

2.76”

For direct mounting in solid walls or in gypsum walls by means of an optional plasterkit (Ref. N° 716 01 000). Colour : paintable plaster - lampunit : galvanized steel Optional laminated colour cover on request (Ref. N° 517 01 005) Can be installed with the opening at the top or bottom

WAVE PLASTERKIT REF. N° : 716 01 000 For mounting into gypsum walls Cutout 27.44” x 11.38” Housing : perforated aluminium

27.44”

11.38” 2.80

designplan/BRICK IN THE WALL

|

21


The Move Out has an innovative design of its own. The plaster fixture disappears smoothly and seamless into the architecture and creates a non-disturbing light beam. The Move Out guarantees a total disappearance into the wall where only the light beam can be noticed. The soft light curves add a new rhythm to the architecture and fade into infinity. The Move Out is foreseen with a special designed printed circuit board for the new generation of the ‘Rebel’ led with integrated electronics, to obtain a maximum light output with an optimal heat release. The lenses ensure a perfect light distribution. The use of colored LEDs allows the architect to personalize his project. ETL listed class II. Requires remote 24V DC power supply. The Move Out can be directly installed in a brick wall or in gypsum by means of an optional plaster kit.

22 |

designplan/BRICK IN THE WALL

DESIGN BY C ARL DEV OLDER

MOVE OUT


MOVE OUT 7”

17.32”

11.14”

7.8

0.43”

” 41

.

11

2.68”

REF. N° : 121 20 100 : Warm White (3000°K) REF. N° : 121 20 200 : Neutral White (4000°K) REF. N° : 121 20 300 : Royal Blue 5× Rebel LED For dimmable 0-10V “5x Rebel LED” change catalog numbers from “XXX 20 XXX” to “XXX 60 XXX”. 24VDC - 10W. Power supply not included. ETL listed. Cutout 7.87” x 17.32”

IP54 Damp label version on request REF. N° : 121 20 101 : Warm White (3000°K) REF. N° : 121 20 201 : Neutral White (4000°K) REF. N° : 121 20 301 : Royal Blue

For direct mounting in solid walls or in gypsum walls by means of an optional plasterkit (Ref. N° 721 01 000). Colour : paintable plaster - lampunit galvanized steel Can be installed with the LED’s at the top or bottom Requires remote 24V DC power supply

MOVE OUT PLASTERKIT 11.57”

REF. N° : 721 01 000 For mounting into gypsum walls Cutout 11.57” x 17.48” Housing : perforated aluminium 17.48”

2.7

2”

designplan/BRICK IN THE WALL

|

23


24 |

designplan/BRICK IN THE WALL


designplan/BRICK IN THE WALL

|

25


MOVE IN

DE SIGN BY C ARL DEV OLDER

The Move In is a small and elegant luminaire that can be perfectly integrated into any interior thanks to its simplicity. The minimalist design creates an environment of pure and simple lines. The Move In is available with high power LEDs After integration of the plaster luminaire, the lamp module can easily be installed. ETL listed class II. Requires remote 24V DC power supply. The Move In can be directly installed in a brick wall or in gypsum by means of an optional plaster kit.

26 |

designplan/BRICK IN THE WALL


MOVE IN

17.13”

11.02”

7.2”

.24

10

2.56”

REF. N° : 122 20 100 : Warm White (3000°K) REF. N° : 122 20 200 : Neutral White (4000°K) REF. N° : 122 20 300 : Royal Blue 5× Rebel LED 24VDC - 10W. Power supply not included. For dimmable 0-10V “5x Rebel LED” change catalog numbers from “XXX 20 XXX” to “XXX 60 XXX”. Cutout 7.7” x 17.13” ETL listed.

IP54 Damp label version on request REF. N° : 122 20 101 : Warm White (3000°K) REF. N° : 122 20 201 : Neutral White (4000°K) REF. N° : 122 20 301 : Royal Blue

For direct mounting in solid walls or in gypsum walls by means of an optional plasterkit (Ref. N° 722 01 000). Colour : paintable plaster - lampunit galvanized steel Can be installed with the LED’s at the top or bottom Requires remote 24V DC power supply

MOVE IN PLASTERKIT 10.39”

REF. N° : 722 01 000 For mounting into gypsum walls Cutout 10.43" x 17.32" Housing : perforated aluminium 17.28”

2.6

designplan/BRICK IN THE WALL

|

27


28 |

designplan/BRICK IN THE WALL


designplan/BRICK IN THE WALL

|

29


SLIM The Slim is a small and elegant luminaire that can be perfectly integrated into any interior thanks to its simplicity. The minimalist design creates an environment of pure and simple lines. The LED light source allows the Slim to be used as a floor or ceiling washlight. The Slim is available with a specially designed printed circuit board for the new generation of the Xicato LED with integrated electronics, for a maximum light output with an optimal heat release. The lenses ensure a perfect light distribution. The use of colored LEDs allows the architect to personalize his project. ETL listed class II. Requires remote 350mA power supply. After integration of the plaster luminaire, the lamp module can easily be installed. The Slim can be directly installed in a brick wall or in gypsum by means of an optional plaster kit.

30

|

designplan/BRICK IN THE WALL


5.12”

21.46”

15.67”

SLIM

3.

54

” 2.2 4”

3.5

REF. N° : 107 29 100 : Warm White (3000°K) REF. N° : 107 29 000 : Warmer White (2700°K) REF. N° : 107 29 500 : Super Warm White (2200°K) 1x Xicato LED 350mA - 4W. Power supply not included. Cutout 3.54” x 21.46” ETL listed.

IP54 Damp label version: REF. N° : 107 29 101 : Warm White (3000°K) REF. N° : 107 29 201 : Neutral White (4000°K) REF. N° : 107 29 001 : Super Warm White (2200°K)

For direct mounting in solid walls or in gypsum walls by means of an optional plasterkit (Ref. N° 707 01 000). Color : paintable plaster - lampunit galvanized steel Can be installed with the LED’s at the top or bottom Requires remote 350mA power supply

SLIM PLASTERKIT 3.70”

REF. N° : 707 01 000 For mounting into gypsum walls Cutout 3.75' x 21.6" Housing : perforated aluminium 21.61”

3.58”

designplan/BRICK IN THE WALL

|

31


32 |

designplan/BRICK IN THE WALL


designplan/BRICK IN THE WALL

|

33


SMALL The Small is guaranteed to entirely blend into the wall, so that only the light beam will be noticed. With the light source at the top and placed at a relatively low level, the Small can be used to illuminate circulation zones. Due to its discrete design, the light fixture can be installed in any interior to create a cozy atmosphere. The Small is available with a specially designed printed circuit board for the new generation of the ‘Rebel’ LED with integrated electronics, for a maximum light output with an optimal heat release. The lenses ensure a perfect light distribution. The use of colored LEDs allows the architect to personalize his project. ETL listed class II. Requires remote 24V DC power supply. After integration of the plaster luminaire, the lamp module can easily be installed. The Small can be directly installed in a brick wall or in gypsum by means of an optional plaster kit.

34 |

designplan/BRICK IN THE WALL


5.12”

9.17”

14.17”

SMALL

3.

54

9”

3.3

2”

4.7

Warm White (3000°K)Neutral White (4000°K)Royal Blue 3× REBEL LED REF. N° : 106 20 100 : Warm White (3000°K) REF. N° : 106 20 200 : Neutral White (4000°K) REF. N° : 106 20 300 : Royal Blue 24VDC 6W. Power supply not included. Cutout 4.72” x 14.17” ETL listed.

IP54 Damp label version on request REF. N° : 106 20 101 : Warm White (3000°K) REF. N° : 106 20 201 : Neutral White (4000°K) REF. N° : 106 20 301 : Royal Blue For direct mounting in solid walls or in gypsum walls by means of an optional plasterkit (Ref. N° 706 01 000). Colour : paintable plaster - lampunit galvanized steel Can be installed with the LED’s at the top or bottom Requires remote 24V DC power supply

SMALL PLASTERKIT 8”

REF. N° : 706 01 000 For mounting into gypsum walls Cutout 4.88" x 14.33" Housing : perforated aluminium

4.8

14.33”

3.

58

designplan/BRICK IN THE WALL

|

35


36 |

designplan/BRICK IN THE WALL


designplan/BRICK IN THE WALL

|

37


NORMALL

DE S IGN BY ARC H . STEPH ANE BOENS

The Normall collection is designed to create indirect ambient lighting. The fixture can be seamlessly installed in walls with a lamp at the top or at the bottom. The Normall series are available with with compact fluorescent lamps and energy-saving Rebel Leds. Requires remote 24V DC power supply. The lenses on the LED ensure a perfect light distribution. The use of colored LEDs allows the architect to personalize his project. It is not just a simple lighting fixture, it becomes a part of the architecture. An optional plaster kit allows installation in gypsum walls. Once the plaster luminaires are painted in the desired colour, the light source can be installed using a simple and ingenious system.

38 |

designplan/BRICK IN THE WALL


4.33”

14.17”

9.17”

NORMALL

3.

8”

7.4

54

6”

8.6

REF. N° : 105 01 026 26W Double Twin CFL (lamp by others) G24q-3 - 120-277V integral electronic ballast Cutout 8.66” x 14.17” ETL listed.

REF. N° : 105 20 100 : Warm White (3000°K) REF. N° : 105 20 200 : Neutral White (4000°K) REF. N° : 105 20 300 : Royal Blue 6× Rebel LED For dimmable 0-10V “6x Rebel LED” change catalog numbers from “XXX 20 XXX” to “XXX 60 XXX”. 24VDC 12W. Power supply not included. ETL listed.

IP54 Damp label version on request REF. N° : 105 20 101 : Warm White (3000°K) REF. N° : 105 20 201 : Neutral White (4000°K) REF. N° : 105 20 301 : Royal Blue For direct mounting in solid walls or in gypsum walls by means of an optional plasterkit (Ref. N° 705 01 000). Colour : paintable plaster - lampunit galvanized steel Can be installed with the LED’s at the top or bottom Requires remote 24V DC power supply

NORMALL PLASTERKIT ”

8.82

REF. N° : 705 01 000 For mounting into gypsum walls Cutout 8.82" x 14.33" Housing : perforated aluminium 14.33”

3.

58

designplan/BRICK IN THE WALL

|

39


40 |

designplan/BRICK IN THE WALL


designplan/BRICK IN THE WALL

|

41


42 |

designplan/BRICK IN THE WALL


designplan/BRICK IN THE WALL

|

43


BIG The Big, with its asymmetric reflector shape, has the same lighting concept as the Normall, but bigger dimensions allow its integration in larger architectural designs. The Big can be directly installed in a brick wall or in gypsum by means of an optional plaster kit.

44 |

designplan/BRICK IN THE WALL


4.33”

15.35”

10.35”

BIG

3.

8” 8.7 ” .35 10

54

REF. N° : 104 01 026 26W Double Twin CFL (lamp by others) G24q-3 - 120-277V integral electronic ballast Cutout 8.78” x 15.35” ETL listed.

For direct mounting in solid walls or in gypsum walls by means of an optional plasterkit (Ref. N° 704 01 000). Colour : paintable plaster - lampunit galvanized steel

BIG PLASTERKIT REF. N° : 704 01 000 For mounting into gypsum walls Cutout 10.51" x 15.51" Housing : perforated aluminium

1”

10.5

15.51” 3.

58

designplan/BRICK IN THE WALL

|

45


46 |

designplan/BRICK IN THE WALL


designplan/BRICK IN THE WALL

|

47


XT The XT is designed for compact high power fluorescent lamps 42-57W. This results in large dimensions with an asymmetric reflector shape. The luminaire is driven by its function to create and control maximum output without glare. The XT can be directly installed in a solid wall or in gypsum by means of an optional plaster kit.

48 |

designplan/BRICK IN THE WALL


17.28”

27.70”

15.94”

XT

5”

.6

11

REF. N° : 108 01 042 42W Triple Twin CFL (lamp by others) GX24q-4 - 120-277V integral electronic ballast ETL listed. Cutout 12.76” x 27.7”

3.5

4”

6”

.7

12

REF. N° : 108 01 057 TC-TEL 57W (lamp by others) GX24q-5 - 120-277V integral electronic ballast Cutout 12.76” x 27.7” ETL listed.

For direct mounting in solid walls or in gypsum walls by means of an optional plasterkit (Ref. N° 708 01 000). Colour : paintable plaster - lampunit galvanized steel

XT PLASTERKIT 9”

REF. N° : 708 01 000 For mounting into gypsum walls Cutout 3.39" x 23.86" Housing : perforated aluminium

3.3

23.86” 3.5

8”

designplan/BRICK IN THE WALL

|

49


MOOR A collection inspired by Moorish architecture. This style is typical of the revival of exotic oriental architecture. The variety of designs with different decorative patterns inspires the lighting designer to integrate this collection into a large range of projects. Seamless integration into the wall remains, of course. the basic idea of ‘Brick in the Wall’. The complete Moor range is also available with a special designed printed circuit board for the new generation of the ‘Rebel’ LED with integrated electronics. The LED version requires remote 24V DC power supply. The lenses ensure an perfect light distribution. The use of colored LEDs allows the architect to personalize his project. The Moor can be directly installed in a solid wall or in gypsum by means of an optional plaster kit.

50 |

designplan/BRICK IN THE WALL


4.92”

15.55”

10.04”

MOOR 1

3.

8”

7.4

54

6”

8.6

REF. N° : 101 01 026 26W Double Twin CFL (lamp by others) G24q-3 - 120-277V integral electronic ballast Cutout 8.66” x 15.55” ETL listed.

For direct mounting in solid walls or in gypsum walls by means of an optional plasterkit (Ref. N° 701 01 000). Colour : paintable plaster - lampunit galvanized steel Available with 6× Rebel LED’s IP20 & IP54 damp label on request (see Ref.N° page 63)

4.92”

19.49”

13.98”

MOOR 1 LARGE

3.

8”

54

7.4

6”

8.6

REF. N° : 102 01 026 26W Double Twin CFL (lamp by others) G24q-3 - 120-277V integral electronic ballast Cutout 8.66” x 19.49” ETL listed.

For direct mounting in solid walls or in gypsum walls by means of an optional plasterkit (Ref. N° 702 01 000). Colour : paintable plaster - lampunit galvanized steel Available with 6× Rebel LED’s IP20 & IP54 damp label on request (see Ref.N° page 63)

designplan/BRICK IN THE WALL

|

51


52 |

designplan/BRICK IN THE WALL


designplan/BRICK IN THE WALL

|

53


4.92”

15.55”

10.04”

MOOR 2

3.

8”

7.4

54

6”

8.6

REF. N° : 101 02 026 26W Double Twin CFL (lamp by others) G24q-3 - 120-277V integral electronic ballast Cutout 8.66” x 15.55” ETL listed.

For direct mounting in solid walls or in gypsum walls by means of an optional plasterkit (Ref. N° 701 01 000). Colour : paintable plaster - lampunit galvanized steel Available with 6× Rebel LED’s IP20 & IP54 damp label on request (see Ref.N° page 63)

4.92”

19.49”

13.98”

MOOR 2 LARGE

3.

8”

54

7.4

6”

8.6

REF. N° : 102 02 026 26W Double Twin CFL (lamp by others) G24q-3 - 120-277V integral electronic ballast Cutout 8.66” x 19.49” ETL listed.

For direct mounting in solid walls or in gypsum walls by means of an optional plasterkit (Ref. N° 702 01 000). Colour : paintable plaster - lampunit galvanized steel Available with 6× Rebel LED’s IP20 & IP54 damp label on request (see Ref.N° page 63)

54 |

designplan/BRICK IN THE WALL


4.91”

15.55”

10.04”

MOOR 3

3.

8”

7.4

54

6”

8.6

REF. N° : 101 03 026 26W Double Twin CFL (lamp by others) G24q-3 - 120-277V integral electronic ballast Cutout 8.66” x 15.55” ETL listed.

For direct mounting in solid walls or in gypsum walls by means of an optional plasterkit (Ref. N° 701 01 000). Colour : paintable plaster - lampunit galvanized steel Available with 5× Rebel LED’s IP20 & IP54 damp label on request (see Ref.N° page 63)

4.91”

19.49”

13.98”

MOOR 3 LARGE

3.

8”

54

7.4

6”

8.6

REF. N° : 102 03 026 26W Double Twin CFL (lamp by others) G24q-3 - 120-277V integral electronic ballast Cutout 8.66” x 19.49” ETL listed.

For direct mounting in solid walls or in gypsum walls by means of an optional plasterkit (Ref. N° 702 01 000). Colour : paintable plaster - lampunit galvanized steel Available with 6× Rebel LED’s IP20 & IP54 damp label on request (see Ref.N° page 63)

designplan/BRICK IN THE WALL

|

55


56 |

designplan/BRICK IN THE WALL


4.92”

17.32”

11.81”

MOOR 4

3.

8”

7.4

54

6”

8.6

REF. N° : 101 04 026 26W Double Twin CFL (lamp by others) G24q-3 - 120-277V integral electronic ballast Cutout 8.66” x 17.32” ETL listed. For direct mounting in solid walls or in gypsum walls by means of an optional plasterkit (Ref. N° 701 02 000). Colour : paintable plaster - lampunit galvanized steel Available with 6× Rebel LED’s IP20 & IP54 damp label on request (see Ref.N° page 63)

4.92”

21.26”

15.75”

MOOR 4 LARGE

3.

8”

54

7.4

6”

8.6

REF. N° : 102 04 026 26W Double Twin CFL (lamp by others) G24q-3 - 120-277V integral electronic ballast Cutout 8.66” x 21.26” ETL listed.

For direct mounting in solid walls or in gypsum walls by means of an optional plasterkit (Ref. N° 702 02 000). Colour : paintable plaster - lampunit galvanized steel Available with 5× Rebel LED’s IP20 & IP54 damp label on request (see Ref.N° page 63)

designplan/BRICK IN THE WALL

|

57


4.92”

17.32”

11.81”

MOOR 5

3.

8”

7.4

54

6”

8.6

REF. N° : 101 05 026 26W Double Twin CFL (lamp by others) G24q-3 - 120-277V integral electronic ballast ETL listed.

For direct mounting in solid walls or in gypsum walls by means of an optional plasterkit (Ref. N° 701 02 000). Colour : paintable plaster - lampunit galvanized steel Available with 6× Rebel LED’s IP20 & IP54 damp label on request (see Ref.N° page 63)

4.92”

21.26”

15.75”

MOOR 5 LARGE

3.

54

8” 7.4 6” 8.6

REF. N° : 102 05 026 26W Double Twin CFL (lamp by others) G24q-3 - 120-277V integral electronic ballast Cutout 8.66” x 21.26” ETL listed. For direct mounting in solid walls or in gypsum walls by means of an optional plasterkit (Ref. N° 702 02 000). Colour : paintable plaster - lampunit galvanized steel Available with 6× Rebel LED’s IP20 & IP54 damp label on request (see Ref.N° page 63)

58 |

designplan/BRICK IN THE WALL


designplan/BRICK IN THE WALL

|

59


4.92”

18.7”

13.19”

MOOR 6

3.

8”

7.4

54

6”

8.6

REF. N° : 101 06 026 26W Double Twin CFL (lamp by others) G24q-3 - 120-277V integral electronic ballast Cutout 8.66” x 18.7” ETL listed.

For direct mounting in solid walls or in gypsum walls by means of an optional plasterkit (Ref. N° 701 03 000). Colour : paintable plaster - lampunit galvanized steel Available with 6× Rebel LED’s IP20 & IP54 damp label on request (see Ref.N° page 63)

4.92”

22.64”

17.13”

MOOR 6 LARGE

3.

54

8” 7.4 6” 8.6

REF. N° : 102 06 026 26W Double Twin CFL (lamp by others) G24q-3 - 120-277V integral electronic ballast Cutout 8.66” x 22.64” ETL listed. For direct mounting in solid walls or in gypsum walls by means of an optional plasterkit (Ref. N° 702 03 000). Colour : paintable plaster - lampunit galvanized steel Available with 6× Rebel LED’s IP20 & IP54 damp label on request (see Ref.N° page 63)

60 |

designplan/BRICK IN THE WALL


4.92”

18.7”

13.19”

MOOR 7

3.

8”

7.4

54

6”

8.6

REF. N° : 101 07 026 26W Double Twin CFL (lamp by others) G24q-3 - 120-277V integral electronic ballast Cutout 8.66” x 18.7” ETL listed.

For direct mounting in solid walls or in gypsum walls by means of an optional plasterkit (Ref. N° 701 03 000). Colour : paintable plaster - lampunit galvanized steel Available with 6× Rebel LED’s IP20 & IP54 damp label on request (see Ref.N° page 63)

4.92”

22.64”

17.13”

MOOR 7 LARGE

3.

54

8” 7.4 ” 6 8.6

REF. N° : 102 07 026 26W Double Twin CFL (lamp by others) G24q-3 - 120-277V integral electronic ballast Cutout 8.66” x 22.64” ETL listed.

For direct mounting in solid walls or in gypsum walls by means of an optional plasterkit (Ref. N° 702 03 000). Colour : paintable plaster - lampunit galvanized steel Available with 6× Rebel LED’s IP20 & IP54 damp label on request (see Ref.N° page 63)

designplan/BRICK IN THE WALL

|

61


4.92”

18.7”

13.19”

MOOR 8

3.

8”

7.4

54

6”

8.6

REF. N° : 101 08 026 26W Double Twin CFL (lamp by others) G24q-3 - 120-277V integral electronic ballast Cutout 8.66” x 18.7” ETL listed.

For direct mounting in solid walls or in gypsum walls by means of an optional plasterkit (Ref. N° 701 03 000). Colour : paintable plaster - lampunit galvanized steel Available with 5× Rebel LED’s IP20 & IP54 damp label on request (see Ref.N° page 63)

4.92”

22.64”

17.13”

MOOR 8 LARGE

3.

8”

54

7.4

6”

8.6

REF. N° : 102 08 026 26W Double Twin CFL (lamp by others) G24q-3 - 120-277V integral electronic ballast Cutout 8.66” x 22.64” ETL listed.

For direct mounting in solid walls or in gypsum walls by means of an optional plasterkit (Ref. N° 702 03 000). Colour : paintable plaster - lampunit galvanized steel Available with 6× Rebel LED’s IP20 & IP54 damp label on request (see Ref.N° page 63)

62 |

designplan/BRICK IN THE WALL


MOOR RANGE WITH REBEL LEDS 6× Rebel LED 24VDC - 12W. Power supply not included. For dimmable 0-10V “6x Rebel LED” change catalog numbers from “XXX 2X XXX” to “XXX 6X XXX”. ETL listed.

MODEL

IP20

IP54

COLOUR

Moor 1 Moor 1 Moor 1

101 21 100 101 21 200 101 21 300

101 21 101 101 21 201 101 21 301

Warm White (3000K) Neutral White (4000K) Royal Blue

Moor 2 Moor 2 Moor 2

101 22 100 101 22 200 101 22 300

101 22 101 101 22 201 101 22 301

Warm White (3000K) Neutral White (4000K) Royal Blue

Moor 3 Moor 3 Moor 3

101 23 100 101 23 200 101 23 300

101 23 101 101 23 201 101 23 301

Warm White (3000K) Neutral White (4000K) Royal Blue

Moor 4 Moor 4 Moor 4

101 24 100 101 24 200 101 24 300

101 24 101 101 24 201 101 24 301

Warm White (3000K) Neutral White (4000K) Royal Blue

Moor 5 Moor 5 Moor 5

101 25 100 101 25 200 101 25 300

101 25 101 101 25 201 101 25 301

Warm White (3000K) Neutral White (4000K) Royal Blue

Moor 6 Moor 6 Moor 6

101 26 100 101 26 200 101 26 300

101 26 101 101 26 201 101 26 301

Warm White (3000K) Neutral White (4000K) Royal Blue

Moor 7 Moor 7 Moor 7

101 27 100 101 27 200 101 27 300

101 27 101 101 27 201 101 27 301

Warm White (3000K) Neutral White (4000K) Royal Blue

Moor 8 Moor 8 Moor 8

101 28 100 101 28 200 101 28 300

101 28 101 101 28 201 101 28 301

Warm White (3000K) Neutral White (4000K) Royal Blue

Moor 1 Large Moor 1 Large Moor 1 Large

102 21 100 102 21 200 102 21 300

102 21 101 102 21 201 102 21 301

Warm White (3000K) Neutral White (4000K) Royal Blue

Moor 2 Large Moor 2 Large Moor 2 Large

102 22 100 102 22 200 102 22 300

102 22 101 102 22 201 102 22 301

Warm White (3000K) Neutral White (4000K) Royal Blue

Moor 3 Large Moor 3 Large Moor 3 Large

102 23 100 102 23 200 102 23 300

102 23 101 102 23 201 102 23 301

Warm White (3000K) Neutral White (4000K) Royal Blue

Moor 4 Large Moor 4 Large Moor 4 Large

102 24 100 102 24 200 102 24 300

102 24 101 102 24 201 102 24 301

Warm White (3000K) Neutral White (4000K) Royal Blue

Moor 5 Large Moor 5 Large Moor 5 Large

102 25 100 102 25 200 102 25 300

102 25 101 102 25 201 102 25 301

Warm White (3000K) Neutral White (4000K) Royal Blue

Moor 6 Large Moor 6 Large Moor 6 Large

102 26 100 102 26 200 102 26 300

102 26 101 102 26 201 102 26 301

Warm White (3000K) Neutral White (4000K) Royal Blue

Moor 7 Large Moor 7 Large Moor 7 Large

102 27 100 102 27 200 102 27 300

102 27 101 102 27 201 102 27 301

Warm White (3000K) Neutral White (4000K) Royal Blue

Moor 8 Large Moor 8 Large Moor 8 Large

102 28 100 102 28 200 102 28 300

102 28 101 102 28 201 102 28 301

Warm White (3000K) Neutral White (4000K) Royal Blue

designplan/BRICK IN THE WALL

|

63


MOOR 1/2/3 PLASTERKIT ”

8.82

REF. N° : 701 01 000 For mounting into gypsum walls of Moor 1, Moor 2 & Moor 3 Cutout 8.82" x 15.71" Housing : perforated aluminium 15.71” 3.

58

MOOR 4/5 PLASTERKIT ”

8.82

REF. N° : 701 02 000 For mounting into gypsum walls of Moor 4 & Moor 5 Cutout 8.82" x 17.48" Housing : perforated aluminium 17.48” 3.

58

MOOR 6/7/8 PLASTERKIT ”

8.82

REF. N° : 701 03 000 For mounting into gypsum walls of Moor 6, Moor 7 & Moor 8 Cutout 8.82" x 18.86" Housing : perforated aluminium 18.86” 3.

58

64 |

designplan/BRICK IN THE WALL


MOOR 1/2/3 LARGE PLASTERKIT ”

8.82

REF. N° : 702 01 000 For mounting into gypsum walls of Moor 1 Large , Moor 2 Large & Moor 3 Large Cutout 8.82' x 19.65" Housing : perforated aluminium 19.65” 3.

58

MOOR 4/5 LARGE PLASTERKIT ”

8.82

21.42”

REF. N° : 702 02 000 For mounting into gypsum walls of Moor 4 Large & Moor 5 Large Cutout 8.82" x 21.42" Housing : perforated aluminium

3.

58

MOOR 6/7/8 LARGE PLASTERKIT ”

8.82

22.80”

REF. N° : 702 03 000 For mounting into gypsum walls of Moor 6 Large, Moor 7 Large & Moor 8 Large Cutout 8.82" x 22.80" Housing : perforated aluminium

3.

58

designplan/BRICK IN THE WALL

|

65


66 |

designplan/BRICK IN THE WALL


designplan/BRICK IN THE WALL

|

67


The award “red dot” for high design quality, expressing innovation in form and function in an exemplary manner, is presented to : Die Auszeichnung “reddot” für hohe Designqualität, die in beispielhafter Weise Innovation in Form und Funktion ausdrückt, wird verliehen an : Atmos Wall Luminaires/Wandleuchten Brick in the Wall NV, Waregem, Belgium/Belgien Design : Carl Devolder, Roeselare, Belgium/Belgien

Essen, 5 July 2010

Prof. Werner Aisslinger Berlin, Germany

Shashi Caan New York, USA

Jorge Pensi Barcelona, Spain

79 Trenton Avenue s Frenchtown, NJ 08825 s Tel: (908) 996-7710 s Fax: (908) 996-7042 www.designplan.com

Prof. Dr. Peter Zee Initiator red dot design Essen, Germany


DI Brick in the Wall: Wall Luminaires