07 GIPS PRIMER
E
CONSUM 0.3-0.52 kg/m
Liquid liner for walls which will be covered in gipsputz Gips Primer is a acrylic resin based water disperser, with high resistance to alkali, used for interior environments surfaces. It reduces the supports’ absorbing ability and the combustibility danger. The mass is mixed with water depending on the support ( at ratios: 1:1 up to 1:3). Technical Characteristics For the uniform of the porosity in high absorbing surfaces. For interior environments High resistance to alkali The mixing ratio with the water: at ratios: 1:1 up to 1:3 It can be applied with a roller or a brush Color: yellow
cleaning net or with solvents. Before starting covering with Giptputz, the surfaces must be dry. At any case it is needed to have a drying time of at least 6 hours. Technical Data Density
1.3 kg/l
Form
Liquid
Consume
0,3-0,5 kg/m2
Preservation
From +5°C to +25°C in a an original packing for 12 months
Application Gips Primer must be mixed with clean water at a 1:1 ratio with weak absorbing, up to the ratio 1:3 in surfaces of high absorbing (Gips Primer- Water). It can be applied with a brush consistently on the surface. The surface’s temperature which will be painted and the temperature of the air must be under +5°C. Important notes After use, the working tool must be cleaned with clean water. The dirt because of Gips Primer, sprayings etc are recommended to be cleaned until they are fresh. The dry material can be removed little by little with water and a 350C
50 C
117