Catalogue English

Scroll for more

Page 1

Implant

System

For more than 30 years, Dentoflex has been creating healthy and attractive smiles in Brazil, and is now growing all over the world.



Dentoex goes beyond Dentoflex has been operating in the dental market for over three decades and doesn’t stop reinventing itself. The company is moving in the right direction by aiming to develop on a daily basis, invest in the latest technology and expand into new horizons. Dentoflex has an ambition to break down and overcome any barriers and form strong relationships and alliances in countries worldwide.



Surface Treatment The Dentoflex’s surface treatments includes aluminum oxide blasting, followed by acid passivation which combines texture and perfect porosity for an excellent biological effect, and as a result giving conditions for osseointegration and clinical success. The Dentoflex implants offer a more rougher surface of up to 300 times greater than a machined surface, stabalising bone-implant contact by up to six times.


Implants


Implant

20 N/cm

IH Cylindrical

10 N/cm

Miruscone

32 N/cm 32 N/cm

A

B

C

Ø 2.95 Ø 3.25 Ø 3.50 Ø 3.75 Ø 4.0 Ø 4.25 Ø 4.5 Ø 5.0 Ø 6.0

Ø 3.35 Ø 3.35 Ø 3.5 Ø 3.75 Ø 4.0 Ø 4.25 Ø 4.5 Ø 5.0 Ø 6.0

3.0 3.0 3.0 1.0 1.0 1.0 1.0 1.0 1.0

20 N/cm 10 N/cm

Available on the following Lengths

Parallel Healing

Temporary Trunnion for Cemented Prosthesis

Closed Molder Transfer

32 N/cm

IH Analogue

Position 01

10 N/cm

DRILLING SEQUENCE - IH CYLINDRICAL IMPLANT

Position 02

Angulate Trunnion

32 N/cm

2,50

Open Moulder Transfer

IMPL.

Esteticone

Temporary Trunnion for Screwed Prosthesis

SPE Healing

(D): 8.0 • 10.0 • 11.5 • 13.0 • 15.0 and 17.0 mm for all diameters. And length 7,0mm from the diameter of 3,75mm on. Produced on commercially pure Titanium. With and without assembler. All Items have Cover Screw Included. Double Thread.

Uclas

BUR

Ø 2.95

Ø 2.3

Ø 3.25

Ø 2.3 Ø 2.6

Ø 3.5

Ø 2.3 Ø 2.6 Ø 2.9

Ø 3.75

Ø 2.3 Ø 2.6 Ø 2.9 Ø 3.2

Ø 4.0

Ø 2.3 Ø 2.6 Ø 2.9 Ø 3.2 Ø 3.4

Ø 4.25

Ø 2.3 Ø 2.6 Ø 2.9 Ø 3.2 Ø 3.4 Ø 3.7

Ø 4.5

Ø 2.3 Ø 2.6 Ø 2.9 Ø 3.2 Ø 3.4 Ø 3.7 Ø 4.0

Ø 5.0

Ø 2.3 Ø 2.6 Ø 2.9 Ø 3.2 Ø 3.4 Ø 3.7 Ø 4.0

Ø 4.2

Ø 6.0

Ø 2.3 Ø 2.6 Ø 2.9 Ø 3.2 Ø 3.4 Ø 3.7 Ø 4.0

Ø 4.2 Ø 5.0

Implant

*BREEDER SCREW OPTIONAL USE

IH Conical

20 N/cm 10 N/cm

A Miruscone

32 N/cm

32 N/cm

20 N/cm 10 N/cm

Closed Moulder Transfer

10 N/cm 32 N/cm

IH Analogue

2.50

C 1.0 1.0 0.5 0.5 0.5

(D):10.0 • 11.5 • 13.0 • 15.0 mm, and on the 8.5 mm starting on Ø 3.75. Produced on commercially pure Titanium. With assembler. Cover Screw included. Double Thread.

Position 01 Position 02

Temporary Trunnion for Screwed Prosthesis

SPE Healing

Ø 3.5 Ø 3.75 Ø 4.25 Ø 5.0 Ø 6.0

Available on the following lengths

Temporary Trunnion for Cemented Prosthesis Parallel Healing

B

Ø 3.5 Ø 3.75 Ø 4.25 Ø 5.0 Ø 6.0

DRILLING SEQUENCE - IHIMPLANTE CONICALHIIMPLANT SEQUÊNCIA DE BROCAS CÔNICO Esteticone

Angulate Trunnion 32 N/cm

Open Moulder Transfer Uclas

BUR BROCA

IMPL. IMPL.

CONICAL B. B. CÔNICA

Ø 3.5

Ø 2.3

Ø 3.5

Ø 3.75

Ø 2.3

Ø 3.75

Ø 4.25

Ø 2.3 Ø 2.6 Ø 2.9

Ø 4.3

Ø 5.0

Ø 2.3 Ø 2.6 Ø 2.9 Ø 3.2 Ø 3.4

Ø 5.0

Ø 6.0

Ø 2.3 Ø 2.6 Ø 2.9 Ø 3.2 Ø 3.4 Ø 3.7 Ø 4.0 Ø 4.2 Ø 4.5

Ø 6.0

**BREEDER SCREW OPTIONAL USE *CONICAL BUR


Implante

EH Cylindrical

A

20 N/cm 10 N/cm

Miruscone

32 N/cm

20 N/cm 10 N/cm

Parallel Healing

Temporary trunnion fory Screw Prosthesis

Ø 3.25M Ø 3.25M Ø 3.75 Ø 4.0 Ø 4.5 Ø 5.0

B

C

Ø 3.6 Ø 4.1 Ø 4.1 Ø 4.1 Ø 5.0 Ø 5.0

0.7 0.7 0.7 0.7 0.7 0.7

Available on the following lengths (D):7 • 8.5 • 10.0 • 11.5 • 13.0 • 15.0 and 18.0mm. Produced on commercially pure Titanium. With assembler. Cover screw included. Double Thread.

32 N/cm

Closed Moulder Transfer 32 N/cm

EH Analogue

10 N/cm

Angulate Trunnion Temporary Trunnion for Cemented Prosthesis

SPE Healing

DRILLING SEQUENCE - EH CYLINDRICAL IMPLANT

IMPL. Esteticone

Open Moulder Transfer

32 N/cm

BUR

CTK

Ø 3.25M

Ø 2.3 Ø 2.6

Ø 3.25M

Ø 2.3 Ø 2.6

Ø 3.75

Ø 2.3 Ø 2.6 Ø 2.9 Ø 3.2

Ø 4.0

Ø 2.3 Ø 2.6 Ø 2.9 Ø 3.2 Ø 3.4

Ø 4.5

Ø 2.3 Ø 2.6 Ø 2.9 Ø 3.2 Ø 3.4 Ø 3.7 Ø 4.00

Ø 5.5

Ø 2.3 Ø 2.6 Ø 2.9 Ø 3.2 Ø 3.4 Ø 3.7 Ø 4.00 Ø 4.20

• • •

• CTK - COUNTERSINK BUR * BREEDER SCREW OPTIONAL USE

Uclas

Implant EH Conical

A 10 N/cm

32 N/cm

Miruscone

20 N/cm 10 N/cm

Temporary Trunnion for Screw Prosthesis Parallel Healing

Closed Moulder Transfer

32 N/cm

EH Analogue

E

C

E

0.7 2.7 0.7 3.0 1.0 3.0 1.0 3.0

(D): 8.5 • 10.0 • 11.5 • 13.0 • 15.0 mm. Produced on commercially pureTitanium. With assembler. Cover screw included. Double Thread. DRILLING - EH CONICAL IMPLANT SEQUÊNCIA DESEQUENCE BROCAS IMPLANTE HI CÔNICO

Angulate Trunnion Temporary Trunnion for Cemented Prosthesis

B Ø 4.1 Ø 4.45 Ø 5.0 Ø 6.0

Available on the following lengths

32 N/cm 10 N/cm

SPE Healing

Ø 3.75 Ø 4.3 Ø 5.0 Ø 6.0

Esteticone

32 N/cm

Open Moulder Transfer

Uclas

IMPL.

BUR

Ø 3.75

Ø 2.3

Ø 4.3

Ø 2.3 Ø 2.6

Ø 2.9

Ø 5.0

Ø 2.3 Ø 2.6

Ø 2.9

Ø 3.2

Ø 3.4

Ø 6.0

Ø 2.3 Ø 2.6

Ø 2.9

Ø 3.2

Ø 3.4

CONICAL B. Ø 3.75 Ø 4.3 Ø 5.0 Ø 3.7

Ø 4.0

Ø 4.2

Ø 4.5

Ø 6.0

*BREEDER SCREW OPTIONAL USE *CONICAL BUR


Implant Internal Torque

10 N/cm

Miruscone

32 N/cm

Parallel Healing

Closed Moulder Transfer

B

C

Ø 4.1

0.7

Ø 3.75

Ø 4.1

0.7

Ø 4.0

Ø 4.1

0.7

Available on the following lengths (D): 8.5 • 10.0 • 11.5 • 13.0 • 15.0 and 18.0mm. Produced on commercially pure Titanium. Without assembler. Cover Screw not included. Double Thread.

20 N/cm 10 N/cm

Temporary Trunnion for Screwed Prosthesis

A Ø 3.25

32 N/cm

DRILLING SEQUENCE - INTERNAL TORQUE IMPLANT

IMPL. 32 N/cm

EH Analogue

10 N/cm

Angulate Trunnion

BUR CTK

CTK

Ø 3.25

Ø 2.3

Ø 2.6

Ø 3.75

Ø 2.3

Ø 2.6

Ø 2.9

Ø 3.2

Ø 4.0

Ø 2.3

Ø 2.6

Ø 2.9

Ø 3.2

• • Ø 3.4

• CTK - COUNTERSINK BUR SPE Healing Temporary Trunnion for Cemented Prosthesis

Open Moulder Transfer

* BREEDER SCREW OPTIONAL USE

Esteticone

ACCESSORIES Counter-angle wrench and short and long ratchet available.

32 N/cm

Uclas

Implant Flex 32 N/cm

32 N/cm

Anti-rotational Transfer

Anti-rotational Analogue

Anti-Rotational Metalic Sleeve

Anti-Rotational Plastic Sleeve

32 N/cm

Anti-Rotational Metalic Brace Sleeve

Healing Cover

A

B

Ø 3.75

Ø 4.8

2.0 / 3.0 / 4.0

C

Ø 4.25

Ø 4.8

2.0 / 3.0 / 4.0

Ø 5.0

Ø 4.8

2.0 / 3.0 / 4.0

Available on the following lengths (D):8.5 • 10.0 • 11.5 • 13.0 • 15.0mm. Produced on commercially pure Titanium. With assembler. Cover Screw not included. Double Thread. Plastic Coif

DRILLING SEQUENCE - FLEX IMPLANT

IMPL.

Circular transfer Circular Analogue

Circular Metalic Sleeve

Circular Plastic Sleeve

Circular Metalic Brace Sleeve

BUR

Ø 3.75

Ø 2.3

Ø 4.25

Ø 2.3

Ø 2.6

Ø 2.9

Ø 5.0

Ø 2.3

Ø 2.6

Ø 2.9

B. CÔNICA Ø 3.75 Ø 4.3 Ø 3.2 Ø 3.4

Ø 5.0

*BREEDER SCREW OPTIONAL USE *CONICAL BUR


Implant Temporary O’ring

• • • •

o’ring

Produced on ASTM-F136 Titanium grade V Use 1.80 mm bur Maximum torque of 35 N/cm to 45N/cm Micro thread

Ø 2.6x10 Ø 2.6x13 Ø 2.6x15

Trunnion for Cemented Prosthesis

Angulate Trunnion for Cemented Prosthesis

Ø 2.6x18

Implant Zygomatic

Implant Short

The ZYGOMATIC implant is presented in two models: Intrasinusal Technique (IT): It has thread on the whole body of the implant. Exteriorized Technique (ET): It does not have thread on the part in contact with the soft tissue. • Produced on commercially pure Titanium. • With assembler. Cover Screw included. • Available on the following lengths: 35.0 • 37.5 • 40.0 • 42.5 • 45.0 • 47.5 • 50.0 • 52.5 e 55.0mm.

ET

Ø 5.0 x 5.0

Ø 5.0 x 6.0

Ø 6.0 x 5.0

Ø 5.0 x 7.0

Ø 6.0 x 6.0

Ø 6.0 x 7.0

DRILLING SEQUENCE

IT

Ø 2.3

Ø 3.4

Ø 4.2

Ø 5.0

• • • • • • • • • • • •

With assembler. Cover Screw included; Presentantion: Pre-assembled; Model: Cylindrical; Platform: External Hexagon; Series: Gold; Produced on commercially pure Titanium; Blasted with aluminium oxide and acid passivation; Porous surface (PS); Sterilized by cobalt 60 gamma rays; It has specific kit; Recommended for upper and lower rear teeth; Developed to avoid traumatic techniques of maxillary sinus elevation; • Developed to avoid the technique of lower alveolar nerve lateralization


Mini screw Orthodontic

Screw Osseous graft

The orthodontic mini screw is available on: • Thread Ø1.6 and 1.9 • Short 0.2mm, • Medium 1.0mm • Long 2.0mm

The Dentoflex screws for Osseous Graft placing are developed to be placed surgically in the maxilla or jaw, for its use in Implantodonty and Buco maxillary facial surgery, assigned to the osseous graft fixation with function of osseous reconstruction

• Thread length of 7.0mm, 9.0mm and 11.0mm • Titanium produced ASTM-F136 grade V Rosca Auto Perfurante

Ø1.6 • It is recommended for the use among roots, areas with high bone density, edentulous areas and when a good initial stability is obtained.

Ø1.9 • It is recommended for the use among roots, areas with low bone density, edentolous areas and can be used in cases whem the 1,6mm mini screw does not present a good initial stability.

Available on the following lengths Ø 1.6 x 9 Ø 1.6 x 10.5 Ø 1.6 x 12 Ø 1.6 x 13.5

Ø 1.8 x 9 Ø 1.8 x 10.5 Ø 1.8 x 12 Ø 1.8 x 13.5


Implant Cone Morse B

C

Ø 3.5 Ø 3.75 Ø 4.25 Ø 5.0 Ø 6.0

2.7 3.2 3.6 4.5 5.1

Avaliable on the following lengths 8.5 • 10.0 • 11.5 • 13.0 • 15.0 Produced on commercially pure Titanium. Without assembler. Double Thread.

A

DRILLING SEQUENCE - CONE MORSE IMPLANT Available wrench for counter-angle and short or long ratchet

Healing

Cloused Molder Transfer

32 N/cm

C

Implant Analogue

32 N/cm

IMPL. Ø 3.5 Ø 3.75 Ø 4.25 Ø 5.0 Ø 6.0

BUR

CONICAL B.

Ø 2.3 B. Cônica Ø 2.3 Ø 2.3 Ø 2.6 Ø 2.9 Ø 2.3 Ø 2.6 Ø 2.9 Ø 3.2 Ø 3.4 Ø 2.3 Ø 2.6 Ø 2.9 Ø 3.2 Ø 3.4 Ø 3.7 Ø 4.0 Ø 4.2 Ø 4.5

Ø 3.5 Ø 3.75 Ø 4.3 Ø 5.0 Ø 6.0

*BREEDER SCREW OPTIONAL USE * CONICAL BUR

32 N/cm

32 N/cm

Universal trunnion

Análogo do Munhão Universal

Miruscone

Universal Trunnion transfer

Esteticone

Open Moulder Transfer Miruscone

Open Moulder Transfer Esteticone

Metallic Brace, Plastic and Metallic Sleeve

Metallic Brace, Plastic and Metallic Sleeve

O’ring

Universal Trunnion Coif

Metallic cap

Characteristics of implant Cone Morse • Switch plataform • Appice extremely sharp • High power compression (bone expansion) • Automatic capacity of drilling, cutting and condensing • Micro fillet inside the screw - Groove • Double thread, faster installation and less trauma

• • • • • • •

Cone 11.5 Internal thread 1.8mm Simplified placement (internal torque wrench) with deep indication Micro channel compactive Total blasting Recommended for all types of bones Reaches a high stanbility in recent extration and low bone height

impression coping

Ring of O’ring

Length ring


Accessories


Components availables for Miruscone and Esteticone

Healing cover

Analogue

Cloused moulder transfer

Circular sleeve: Recommended for fixed screwed

Produced on titanium; Parallel or with SPE proflile.

Produced on stainless steel; Available anti-rotational and circular * For miruscone only circular.

Produced on stainless steel; Available on anti-rotational, circular and with SPE proflile. * For miruscone only circular.

prothesis.

Anti-rotational sleeve: Recommended for screwed unitar prosthesis. Available on plastic, metal and metal strap with screw work. For miruscone only circular.

O’ring O’ring • Used in overdenture retention. • It includes plastic capsule for transference, titanium capsule and spacer ring

Fusible O’ring

• Produced on titanium

• Used in overdenture retention

• Brace height: 1; 2; 3; 4 and 5mm

• It includes plastic capsule for transference, titanium capsule and spacer ring.

• Torque: 32N • For implant IH, EH and CM models.


Osteotomes Osteotomes of summers / compactors

Modified osteotomes of summers / expanders

Bar

Maxillary sinus eleveition

Clip

Kit • Baoynel chisel • Straight chisel • Sheperd separator • Osseous beater and condeser

Barra Clip

• Special separator

• Used in overdenture retention.

• Metallic hammer

• With 3 clips (straight; 35°; 70°) and 2 bar.

• Maxillary sinus curette n°1 • Maxillary sinus curette n°2 • Maxillary sinus curette n°3 • Maxillary sinus curette n°4 • Maxillary sinus curette n°5

Graflt

clamps

3 holes 90°

3 holes 45°

Desjardins clamp

Pinça Smith

Pinça Digman 3 holes straight

Without hole


Irrigation Kit

Bone partitioner

Bone crusher

* Merely illustrative photo


Kits


Osseous graft

Prosthetic kit

kit

over implant

The osseous graft it is used in surgeries for placing osseous graft.

To place prothesis over implants of internal and external hexagon.

Contents

Contents

• Case with cover

• Case with cover

• Torque wrench

• Base for assembling

• Torque wrench keys:

• Medium cape of torque wrench keys

• Hand wrench

- Hexagonal of 0.9

• Long cape of wrench keys

• Philips wrench for hand wrench and counter angle

- Short hexagonal of 1.2

• Short cape of torque wrench keys

• Bur of 1.25mm for counter angle and hand piece

- Medium hexagonal of 1.2

• Bur of 1.45mm for counter angle and hand piece

- Long hexagonal of 1.2 - Medium square of 1.3 - Long square of 1.3 - Medium screw drive - Medium esteticone of 2.2 - Medium O´ring of 2.5


Absolute anchorage

Short Implant

Kit

Kit

The Dentoflex surgical kit for absolute anchorage is used in surgeries to place mini screws for orthodontic rehabilition. It is used in the intrabucal orthodontic anchorage and simultaneous treat ment between orthodonty and implantodonty.

For short implants with diameter until 5.0 e 6.0mm Plastic case and internal tray with support in autoclavable silicone

Contents: • Case

Contents:

• Tray

• Perfurated case with cover

• Helicoid lance bur 2.3mm

• Bur 1.25mm diameter for hand piece

• Pilot short bur 2.0 to 3.4

• Bur 1.25mm diameter for counter angle

• Bur 4.2 and 5.0mm • Calibrated depth - gauge for short implant

• Wrench for orthodontic mini screw for hand wrench

• Hexagon digital keys: 0.9 e 1.2mm

• Wrench for orthodontic mini screw for counter angle

• Short and long adaptor for pre-assembled

• Hand wrench

• Ratchet wrench

• Torque wrench (optional) • Wrench for orthodontic mini screw of torque wrench


Super surgical

Reduced surgical

Kit

Kit

• For implants with diameter until 6.0mm • Enabling the use of internal and external hexagon systems • Plastic case and internal tray with support in autoclavable silicone • For implants with diameter until 4.0mm

Contents • Case

• Enabling the use of internal and external hexagon systems • Plastic case and internal tray with support in autoclavable silicone

• Tray

Contents

• Helicoid lance bur 2.3 mm

• Case

• Helicoid lance bur 2.6 mm

• Adapter for pre-mounted EH short and long

• Tri-helicoid bur: 2.9; 3.2; 3.4; 3.7;4.0; 4.2; 4.5 and 5.0mm • Countersink bur • Thread obtainer: 3.15; 3.4; 3.65; 3.9; 4.15; 4.4; 4.9 e 5.9mm • Hexagon digital keys: 0.9 e 1.2mm • Square digital key 1.3mm • 3 direction indicators: 2 short and 1 long

• Helicoid lance bur 2.3mm • Helicoid lance bur 2.6mm • Tri-helicoid bur 2.90, 3.20 e 3.40 mm • Countersink bur • Ratchet wrench

• Bur extender

• Hexagon digital keys 0.9 and 1.2 medium

• Ratchet intermediary IH short and long

• Short fixed wrench T

• Square T wrench

• 2 short direction indicators

• Ratchet wrench

• Ratchet intermediary 2.5mm short and long

• Titanium calibrated sound

• Short/long wrench for internal torque implant for ratchet

• Short/long wrench for internal torque implant for ratchet

• Short/long wrench for internal torque implant for counter angle

• Short/long wrench for internal torque implant for counter angle

• Ratchet thread obtainer 3.15, 3.40 and 3.65mm square

• Rotatory chisel • Assembler holder for counter angle • Short and long adaptor for pre-assembled • Circular bistoury for counter angle

• Bur extender • Calibrated sound


Basic surgical

Mix surgical

Kit

Kit

• For implants with diameter until 6,0 mm • Enabling the use of internal and external hexagon systems • Plastic case and internal tray with support in autoclavable silicone • 1 spacing conical bur 4.3x13 mm

• For implants with diameter until 4.0mm. • Enabling the use of internal and external hexagon systems • Plastic case and internal tray with support in autoclavable silicone

Contents • Case

• Square T wrench

• Tray

• Ratchet wrench

• Helicoid lance bur 2.3mm

• Titanium calibrated sound

• Helicoid bur 2.60mm

• Short/long wrench for internal torque implant

• Tri-helicoid bur: 2.9; 3.2; 3.4 and 3.7mm • Countersink bur • Thread obtainer: 3.15; 3.4; 3.65 and 3.9mm

for ratchet • Short/long wrench for internal torque implant for counter angle

• Hexagon digital key: 0.9 and 1,2mm

• Rotatory chisel

• Square digital key 1.3mm

• Assembler holder for counter angle

• 3 direction indicators: 2 short and 1 long

• Cicular bistoury for counter angle

• Bur extender

• Short and long adaptor for pre-assembled

• Ratchet intermediary IH short and long

Contents

• 1 spacing conical bur 4.3x15 mm

• 1 short adaptor for pre-assembled EH

• 1 spacing conical bur 5.0x10 mm

• 1 long adaptor for pre-assembled EH

• 1 spacing conical bur 5.0x11.5 mm

• 1 helicoid lance bur 2.3 mm

• 1 spacing conical bur 5.0x13 mm

• 1 helicoid bur 2.6 mm

• 1 spacing conical bur 5.0x15 mm

• 1 tri helicoid bur 2.9 mm

• 1 ratchet wrench

• 1 tri helicoid bur 3.2 mm

• 1 digital wrench 0.9 medium

• 1 tri helicoid bur 3.4 mm

• 1 digital wrench 1.2 medium

• 1 tri helicoid bur 3.7 mm

• 1 short direction indicator

• 1 tri helicoid bur 4.0 mm

• 1 long direction indicator

• 1 tri helicoid bur 4.2 mm

• 1 short ratchet intermediary 2.5mm

• 1 tri helicoid bur 4.5 mm

• 1 long ratchet intermediary 2.5 mm

• 1 tri helicoid bur 5.0 mm

• 1 short wrench for internal torque implant for ratchet

• 1 countersink bur

• 1 long wrench for internal torque implant for ratchet

• 1 spacing conical bur 3.5x10 mm

• 1 short wrench for internal torque implant for counter angle

• 1 spacing conical bur 3.5x11.5 mm

• 1 long wrench for internal torque implant for counter angle

• 1 spacing conical bur 3.5x13.0 mm

• 1 short wrench for cone morse implant for ratchet

• 1 spacing conical bur 3.5x15.0 mm

• 1 long wrench for cone morse implant for ratchet

• 1 spacing conical bur 3.75x10 mm

• 1 short wrench for cone morse implant for counter angle

• 1 spacing conical bur 3.75x11.50 mm

• 1 long wrench for cone morse implant for counter angle

• 1 spacing conical bur 3.75x13.0 mm

• Assembler holder for counter angle

• 1 spacing conical bur 3.75x15.0 mm

• 1 bur extender

• 1 spacing conical bur 4.3x10 mm

• 1 calibrated sound

• 1 spacing conical bur 4.3x11.5 mm



Implant

System


MESC897 REV. 01/2010

Implant

System

Dentoflex Com. e Ind. de Materiais Odontológicos Ltda. Street Lino Coutinho, 634 • Ipiranga • Zip Code: 04207-000 • São Paulo • SP • Brazil • Phone: (55 11) 2065-2155 • Fax: (55 11) 2065-2153 www.dentoflex.com.br • comex@dentoflex.com.br