Page 1

CATERPILLAR 330CL HYDRAULIC PIPELAYER


Revolutionary state of the art patented design

STANDARD EQUIPMENT Caterpillar 330CL excavator upper and lower structure • • • • • • • • • • • • •

Boom stop (Positive boomstop) Anti Two Block Device Center Point Swing Bearing Automatic Boom Kick-out Double Security System for Piloting CE and EPA Certified TUV Chartered Engineers Certification High visibility during operation with adjustable higher seat. Kick out boom Anti-two block system Swing Alarm Back up alarm Left side joystick safety switch

Disclaimer The information contained in this brochure is intend to be of a general use only. Delta may at any time for technical or other necessary reasons modify any of the specifications mentioned. Illustrations do not necessarily show the product in standard conditions.The dimensions, weights and capacities shown are approximate only and are subjects to variations within normal manufacturing techniques.


3440

6230 3160

7880

CATERPILLAR 330CL HYDRAULIC PIPELAYER

2590

4040

3440

5020

13350

5930

BASE MACHINE

CONTROLS

Caterpillar 330 Excavator

Fully hydraulic dual joystick controlled

CONVERSION KIT

DRIVE

DELTA 330 Hydraulic conversion kit: State of the Art patented design delivers excellent visibility to the job site which increase operator condifence, comfort, effectiveness and enhanced safety.

Type Max. Drawbar Pull Main pumps Brand Max flow Final drive

CONVERSION KIT IS AVAILABLE ON BRAND NEW AND USED CATERPILLAR 330L/ 330BL/ 330CL/ 330DL/329E

: Hydrostatic : 294 kN / 66,094 lb : Two-speed auto-shift travel : Caterpillar : 280 lit/min : Compact design with three stages planetary production

15050

ENGINE CAB Brand : Caterpillar Model : C9 Bore : 112.0 mm (4.41 in) Stroke : 149.0 mm (5.87 in) Displacement : 8.8 L (537 in3) Certification rating : 247HP/ 184kW Aspiration : Turbocharged Emissions meet : U.S. EPA and EU Stage IIIA Control system ADEM A4 electronic engine controller maximizes fuel efficiency and performance by maintaining the optimum balance between engine speed and hydraulic demand. TIPPING CAPACITY Maximum lift 65.000 kg OPERATING WEIGHT

: Included : Included : Positive filtered ventilation with a pressurized cab Seat : Air suspension and high visibility Design : Visibility, comfort and easy operation allows the operator to focus on safe production and increase productivity Sound performance : Meets OSHA and MSHA requirements BOOM Frame

: Tabular A-Frame boom engineerd for maximum lift capacity and easy detachment Length : 7,30 meter 2-speed hook block : HIGH - 17 mtr/min, LOW - 8 mtr/min HYDRAULIC WINCHES

36.150 kg

Make

COUNTERWEIGHT Total weight

Airconditioning Heater Climate Control

: 6415 kg / 14,140 lbs

: Paccar/ Braden, Planetary dual brake lifting and deriking winch. Hydraulic motors : Bosch/Rexroth 2 speed Hydr. Piston motors Diameter wire rope Boom : 3/4 Inch / 19mm Diameter wire rope Load : 3/4 Inch / 19mm


1

2

3

4

5

6

7

8

9

1 Caterpillar C9 Tier IIIA Engine 247HP (made in USA) 2 LMI safety system on request (made in Netherlands) 3 Boom mounted lightbar with in-cab monitor on request (made in Netherlands) 4 Paccar Braden winches (made in USA) 5 Bosch/Rexroth hydraulic motors for winches (made in Germany) 6 Left and right re-inforced track frame brackets to minimize stress on track frames (made in Netherlands) 7 Front heavy duty bracket for maximum lifting capacity (made in Netherlands) 8 Hydraulic operated kit lifter to change working range or transport mode (made in Netherlands) 9 Can be transported in one load without dismantling anything (Designed in Netherlands) CE marked


lb x 1000

kg x 1000

220

100

200

90

180

80

Lifting Capacity

160 140 120

1399 Engine Torque lb•ft

70

50

415 Engine Power bhp

Max. Load Capacity ISO 8813

100 40

40 20

380 344 308

80 60

1159 1038

Max. Lift Capacity PER S.A.E. J743B

60

1279

30

358

20

BSFC lb/bhp-hr

Working Range ISO 8813

10

1.5 2 4

6

2.5 8

3 10

3.5 4 12

4.5 5 14

16

5.5 18

6 20

6.5 22

7 24

Boom Overhang

M Ft

UNDERCARRIAGE Number of bottom rollers Number of carrying rollers Shoes type Standard shoes width Track Frames

:8 :2 : Single Grouser / Tripple Grouser : 610 mm / 24 Inch : Heavily reinforced track frame brackets minimizes stresses in upper frame and swing bearing and optimize stability

: 618 ltr. / 163 gal : 410 ltr. / 108 gal : 38 ltr. / 10 gal : 36 ltr. / 9,4 gal : 15 ltr. / 4 gal

1600

1800

2000

2200

Length

Machine (without boom): 5.930 Boom 7.300 : 65 m3

330 Conversion kit: Kit specifications have advanced safety features in addition to the updated and market ability of the Caterpillar equipment 3 side working range: It’s configuration allows the sideboom to operate from the right, left and in the front

Transportation: Can be transported in one load, without dismantling anything from the machine

• Delta Load Management System for increase effectiveness and safety • Boom mounted light bar with in-cab monitor and warning systems to optimize safety • Load Cell • Reverse Camera • Cold Weather Kit • GPS Telemetry System • Optional boom lengths available • Excavator attachments to convert machine to conventional Caterpillar 330CL excavator

Total Shipping Volume

1400

Prepare for transportation: Machine can be taken from working- to transport mode in a matter of minutes

OPTIONS

DIMENSIONS

1200

Delta 330CL patented pipelayer conversion kit

FEATURES & BENEFITS

FLUID CAPACITIES Fuel tank Hydraulic system circuit Cooling system Engine oil Final drive each

344 337

0 1

351

Width

Height

3.440 1.620

3.160 0,700

Multi-axis: Hydraulic joystick allows simultaneous, precise control of the load and boom functions with one hand. Joysticks: Dual joystick-controlled hydraulic system is easy to operate and requires minimum operators training. Boom stop: Hydraulic boomstop stops automatically prevents system over travel and boom damage. Multifunctional: 330CL Pipelayer can be converted in a conventional excavator by swapping the boom in a short period of time.


CATERPILLAR 330CL HYDRAULIC PIPELAYER Dealer:

The Netherlands

United Arabic emirates

United states of America

Delta Machinery

Ras Al Khaimah Machineries LLC

Equipment Investco

Haven M529, Port of Moerdijk Mark S Clarkelaan 6 4761RK Zevenbergen The Netherlands

Kharran Road, Al ďŹ liyah Ras Al Khaimah United Arab Emirates

3340 Greens road, Suite 400 Houston Texas United states of America

Tel + 31 888 966 966 Fax + 31 888 966 950

Tel + 971 72289338 Fax + 971 72289337

Tel +1281 590 7474 Fax +1713 2032444

sales@deltaheavymachinery.com www.deltaheavymachinery.com

rakplant@emirates.net.ae www.rakmachineries.com

odecaro@aol.com www.deltaheavymachinery.com


Caterpillar 330CL Hydraulic Pipelayer  

Caterpillar 330CL Hydraulic Pipelayer Revolutionary state of the art patented design

Read more
Read more
Similar to
Popular now
Just for you