Page 1

SHUT IT

PRODUCT

CATALOG VOLUME 11

BRILLIANT DESIGNS. BADASS PRODUCTS. E P I C R E S U LT S .

GAT E H A RD WA RE DESIGNED, ENGINEERED AND ASSEMBLED IN THE USA


Brilliant Designs. Bad Ass Products. Epic Results.

ZINC PLATED

LED I USA

A

B

N

SSEM

SERVICE

CNC

About SHUT IT: SHUT IT™ Gate Hardware started as Counsel Industries, LLC and became an early leader in the design and distribution of hardware and gate systems for the fence and access control industries. Mid-1990s: As vehicular access control began to explode as an industry, two veterans of the fence and access control industries discovered that many of their maintenance and repair issues for automated gate systems were being caused by the faulty or inferior hardware used on many gates. With the help of a team of engineers and an award winning CNC machinist, Counsel leaders set out to develop a line of products that would eliminate the damage caused to expensive operator systems by the poor hardware available in the market. After

SHUT IT Gate Hardware

years of development and field testing Counsel Industries was born. 1998: Counsel began marketing innovative gate solutions designed to ease installation requirements and eliminate premature wear on expensive automated gate operator systems. 2010: Counsel rebranded itself as SHUT IT Gate Hardware in order to better reflect what the company had become - Brilliant Designs. BadAss Products. Epic Results. 2016: D&D Technologies acquires SHUT IT Gate Hardware. BadAss hinges, HardCore Wheels, full cantilever and slider systems are added to the D&D family of products. D&D + SHUT IT: providing the industry with the broadest range of gate hardware.

2


Designed, Engineered and Assembled in USA.

Contents BadAss Gate Hinges

The Original BadAss........................................................... 12 The Rusted Original BadAss.............................................. 12 The Heavy Duty BadAss.................................................... 13 The 100 Year BadAss......................................................... 13 The Stainless BadAss........................................................ 14 The Aluminum BadAss...................................................... 14 The Combo BadAss with Aluminum Body....................... 15 The Combo BadAss with Steel Body................................ 15 The Baby BadAss............................................................... 16 The Rusted Baby BadAss................................................... 16 The Aluminum Baby BadAss............................................. 17 The Combo Baby BadAss.................................................. 17 The BadAss Strap............................................................... 18 The BadAss Barrel.............................................................. 18 The Self Closing BadAss................................................... 19 The Bolt-On BadAss........................................................... 19 The 4” (102mm) Round Bolt-On BadAss.......................... 20 The 6” (152mm) Round Bolt-On BadAss.......................... 20 The Half Bolt-On BadAss................................................... 21 The Bolt-On Baby BadAss.................................................. 21

HardCore Gate Wheels The 4” (102mm) HardCore Wheel for 11⁄2” (38mm) Gate Frame.......................................................................... 22 The 4” (102mm) HardCore Wheel for 2” (51mm) Gate Frame.......................................................................... 22 The 6” (152mm) HardCore Wheel for 11⁄2” (38mm) Gate Frame.......................................................................... 23 The 6” (152mm) HardCore Wheel for 2” (51mm) Gate Frame.......................................................................... 23 The 4” (102mm) HardCore w/ Carriage Plates for 11⁄2” (38mm) Gate Frame.................................................... 24

The SHUT IT Difference • CNC machined to the tightest tolerances in the industry • Unique bushing design produces nearly frictionless movement and maintenance free usage • Highest quality sealed radial ball bearings never need greasing or maintenance • Four different sealed bearing configurations – 1, 2, 3 or 4 bearings per hinge. 2 bearings per wheel. • All components are zinc electroplated to prevent rust and corrosion - Exceptions: aluminum, stainless steel and rusted look • Steel stover lock nuts used prevent loosening and slipping • Super hard, cold rolled steel used on all HardCORE wheels - Literally Hard to the CORE • Slotted yokes for horizontal adjustability • Designed by fence contractors for fence contractors

The 4” (102mm) HardCore with Carriage Plates for 2” (51mm) Gate Frame....................................................... 24 The 6” (152mm) HardCore with Carriage Plates for 11⁄2” (38mm) Gate Frame.................................................... 25 The 6” (152mm) HardCore with Carriage Plates for 2” (51mm) Gate Frame....................................................... 25 The Steel HardCore Carriage Plates................................. 26 The Aluminum HardCore Carriage Plates........................ 26 The 4” (102mm) HardCore Cantilever Wheel Assembly................................................................. 27 The 6” (152mm) HardCore Cantilever Wheel Assembly................................................................. 27 The 6" (152mm) HardCore Wheel for Wheel Boxes......... 28 The HardCore Carriage Cap.............................................. 28 The HardCore Gate Guide Assembly................................ 29 The Extended HardCore Gate Guide Assembly............... 29

Dimensions Product Dimensions..................................................... 30-43

Instruction Guides Installation and Welding Tips...................................... 44-51

5 Years On Bearings

www.shutitgatehardware.com

3


ZINC PLATED

5 Years On Bearings

Anatomy of a BadAss Hinge Shaft

Zinc Electroplating

• 100 year hinge comes with upgraded yoke and Grade 8 shaft (bolt)

• Distributes load directly onto the center ring of the sealed bearings for optimal performance and long life

• Long lasting rust and corrosion protection • No need to grind off before welding • On all components except aluminum, stainless steel & rusted look

Tightest tolerance in the industry • Virtually frictionless rotation

Sealed Bearings

NOTE: All weight ratings found in this catalog are based upon two hinges or two wheels per gate.

• Require no greasing • Maintenance free • Hinge options with 1, 2, 3 and 4 bearings per hinge • Performs better with longer life than roller cages that require periodic greasing • Stainless steel model includes stainless steel sealed bearings

Body (mount to gate) • Fits round or flat surfaces

At Shut It we use the highest grades of steel for optimal welding, strength and performance making them literally BadAss. For welding tips, see pages 44 and 51. Stover Lock Nut

Yoke (mount to post) • Straight bends in yoke provide maximum horizontal adjustment range • Straight bends in yoke provide maximum welding surface

• Uniquely shaped threads that provide a vibration resistant friction fit so the nut stays put • Top thread section is deformed to create two or three locking zones - Can be reused 2-3 times • These all metal locknuts withstand higher temperatures than nylon insert locknuts

For Welding Yoke to Round Fence Post • Weld 11⁄2 x 1⁄2 x 1⁄8" (38x13x3mm) A36 Steel Bar Channel to yoke first. After cooling, weld bar channel to fence post

SHUT IT Gate Hardware

Spacer (bushing)

Fence Post

4


Anatomy of a HardCORE Wheel Zinc Electroplating • Long lasting rust and corrosion protection • No need to grind off before welding • On all wheel components except aluminum carriage plates

Narrow Wheel Profile • Reduces possibility of wheel hitting debris and running off track

SHUTIt

ZINC PLATED

5 Years On Bearings

Tightest tolerance in the industry • Virtually frictionless rotation

Spacer (bushing) • Spacer options for 1.5" (38mm) and 2" (51mm) wide gate profiles • Distributes load directly onto the center ring of the sealed bearings for optimal performance and long life

Two Sealed Bearings • Require no greasing • Maintenance free

At Shut It we use the hardest steel in the industry on our wheels making them literally Hard to the Core For cantilever and sliding gate installations see page 45.

Carriage Plates • Most versatile in assuring proper spacing under gates • No need to stock multiple wheel boxes • Less obtrusive than wheel boxes • Fits to all common gate widths • Vertically adjustable • Available in aluminum and steel

www.shutitgatehardware.com

5


ZINC PLATED

5 Years On Bearings

Anatomy of a BadAss Self-closing Hinge

Horizontally adjustable

Sealed bearings

• For round or flat surfaces

• Require no greasing • Maintenance free • Performs better with longer life than roller cages that require periodic greasing

Gates swings from -50 to 1100 Oil impregnated bronze bushings for long life

High tensile streng spring 300 lbs (136kg) Self-closing ability

5 Tension adjustment settings (threaded holes)

⁄ " (3mm) Allen Key (included)

CI3850 set includes one CI3000

7 64

1. Remove the Tension Locking Screw located on the body 2. Insert the long end of the Allen key into 1 of 3 bottom adjustment guide holes and rotate 3. Once the threaded hole is lined up with the hole, re-insert the Tension Locking Screw 4. Tighten the Tension Locking Screw fully

SHUT IT Gate Hardware

6


Baby BadAss

Original BadAss

1 Sealed Bearing

2 Sealed Bearings

Heavy Duty BadAss

100 Year BadAss

3 Sealed Bearings

3 Sealed Bearings • Thicker yoke • Grade 8 shaft (bolt)

Shut It uses the highest quality sealed radial ball bearings in the industry Sealed bearings • Require no greasing • Maintenance free • Performs better with longer life than roller cages that require periodic greasing

BadAss Strap Hinge

4 Sealed Bearings www.shutitgatehardware.com

7

SHUTIt

The BadAss Hinge Bearing Combinations

ZINC PLATED

5 Years On Bearings


The BadAss Gate Hinges

CI3000 CI3100 CI3200 CI3300 Original Rusted Original Combo BadAss Combo BadAss BadAss (p.12) BadAss (p.12) Aluminum/Steel Stee/Aluminum (p.15) (p.15)

CI3600 Baby BadAss (p.16) Product Number

CI3620 Rusted Baby BadAss (p.16)

Product Name

CI3650 Aluminum Baby BadAss (p.17)

CI3400 Aluminum BadAss (p.14)

CI3670 Combo Baby BadAss (p.17)

CI3500 Heavy Duty BadAss (p.13)

CI3800 Stainless BadAss (p.14)

CI3520 100 Year BadAss (p.13)

CI3850 Self-Closing BadAss Hinge (p.19)

Gap Variance Inch/mm**

Finish

# Of Sealed Bearings

Max Gate Weight lbs/kg

Max Gate Load lbs/kg

Yoke Mat’l*

Body Mat’l

Height inch/ mm

Weight lbs/kg

Original BadAss

2.4-2.9" (61-74mm)

Zinc

2

1,100 lbs (500kg)

2,000 lbs (900kg)

Steel

Steel

3.8" (97mm)

2.5 lbs (1.1kg)

CI3100

Original BadAss Rusted

2.4-2.9" (61-74mm)

Unfinished

2

1,100 lbs (500kg)

2,000 lbs (900kg)

Steel

Steel

3.8" (97mm)

2.5 lbs (1.1kg)

CI3200

Alum/Steel BadAss Combo

2.4-2.9" (61-74mm)

/ Zinc

2

600 lbs (270kg)

1,000 lbs (450kg)

Aluminum

Steel

3.8" (97mm)

2.5 lbs (1.1kg)

CI3300

Steel/Alum BadAss Combo

2.4-2.9" (61-74mm)

Unfinished

Zinc /

2

600 lbs (270kg)

1,000 lbs (450kg)

Steel

Aluminum

3.8" (97mm)

2 lbs (1kg)

CI3400

Aluminum BadAss

2.4-2.9" (61-74mm)

Unfinished

2

600 lbs (270kg)

1,000 lbs (450kg)

Aluminum

Aluminum

3.8" (97mm)

2 lbs (1kg)

CI3500

Heavy Duty BadAss

2.4-2.9" (61-74mm)

Zinc

3

1,500 lbs (680kg)

3,000 lbs (1,360kg)

Steel

Steel

3.8" (97mm)

3.5 lbs (1.6kg)

CI3520

100 Year BadAss

2.5-3.0" (64-76mm)

Zinc

3

1,500 lbs (680kg)

3,000 lbs (1,360kg)

Steel

Steel

4.1" (104mm)

3.5 lbs (1.6kg)

CI3600

Baby BadAss

2.5-3.0" (64-76mm)

Zinc

1

300 lbs (140kg)

500 lbs (230kg)

Steel

Steel

1.3" (33mm)

1 lbs (0.5kg)

CI3620

Baby BadAss Rusted

2.5-3.0" (64-76mm)

Unfinished

1

300 lbs (140kg)

500 lbs (230kg)

Steel

Steel

1.3" (33mm)

1 lbs (0.5kg)

CI3650

Baby BadAss Aluminum

2.5-3.0" (64-76mm)

Unfinished

1

300 lbs (140kg)

500 lbs (230kg)

Aluminum

Aluminum

1.3" (33mm)

0.5 lbs (0.2kg)

CI3670

Baby BadAss Steel/Alum Combo

2.5-3.0" (64-76mm)

Unfinished

1

300 lbs (140kg)

500 lbs (230kg)

Steel

Aluminum

1.3" (33mm)

1 lbs (0.5kg)

CI3800

Stainless Steel BadAss †

2.4-2.9" (61-74mm)

Unfinished

2

1,100 lbs (500kg)

2,000 lbs (900kg)

Stainless

Stainless

3.8" (97mm)

2.5 lbs (1.1kg)

CI3850

Self-closing BadAss Set † †

2.4-2.9" (61-74mm)

Zinc

2/2

300 lbs (140kg)

2,000 lbs (900kg)

Steel

Steel

5.0" (127mm)

5.5 lbs (2.5kg)

Unfinished

Zinc /

* For welding yoke to round fence post, weld 11⁄2 x 1⁄2 x 1⁄8" (38x13x3mm) A36 steel bar channel to yoke first. After cooling, weld bar channel to fence post. ** Adjustable yoke for perfect installations.

SHUT IT Gate Hardware

† All components, including the sealed bearings, are stainless steel. † † Set comes with one self-closing hinge plus one CI3000. Maximum gate weight 1,100 lbs (500kg), but the maximum self-closing weight is 300 lbs (140kg).

8

All weight ratings are based upon two hinges.

CI3000


SHUTIt

The BadAss Bolt-On Gate Hinges

CI3770 Half Bolt-On BadAss (p.21)

CI2051 4" (102mm) Round Bolt-On BadAss (p.20)

CI3750 Bolt-On Baby BadAss (p.21)

All weight ratings are based upon two hinges.

CI3700 Bolt-On BadAss (p.19) CI2053 6" (152mm) Round Bolt-On BadAss (p.20)

Product Number

Product Name

Gap Variance Inches *

Finish

# Of Sealed Bearings

Max Gate Weight lbs/kg

Max Gate Load lbs/kg

Yoke Mat’l

Body Mat’l

Height inch/ mm

Weight lbs/kg

CI2051

4” (102mm) Round Bolton BadAss

2.7-3.2" (69-81mm)

Zinc

2

1,000 lbs (450kg)

2,000 lbs (900kg)

Steel

Steel

7.5" (191mm)

5 lbs (2.3kg)

CI2053

6” (152mm) Round Bolton BadAss

2.7-3.2" (69-81mm)

Zinc

2

1,000 lbs (450kg)

2,000 lbs (900kg)

Steel

Steel

7.5" (191mm)

10 lbs (4.5kg)

CI2054

8” (203mm) Round Bolton BadAss

2.7-3.2" (69-81mm)

Zinc

2

1,000 lbs (450kg)

2,000 lbs (900kg)

Steel

Steel

7.5" (191mm)

15 lbs (6.8kg)

CI3700

Bolt-on BadAss

2.9-3.4" (74-86mm)

Zinc

2

1,000 lbs (450kg)

2,000 lbs (900kg)

Steel

Steel

7.5" (191mm)

3.5 lbs (1.6kg)

CI3750

Baby Bolt-on BadAss

3.0-3.5" (76-89mm)

Zinc

1

250 lbs (110kg)

600 lbs (270kg)

Steel

Steel

4.0" (102mm)

2.0 lbs (1kg)

CI3770

Half Bolt-on BadAss

2.65-3.15" (67-80mm)

Zinc

2

1,000 lbs (450kg)

2,000 lbs (900kg)

Steel

Steel

7.5" (191mm)

2.5 lbs (1.1kg)

* Adjustable yoke for perfect installations.

www.shutitgatehardware.com

9


The BadAss Barrel Hinges

CI3900 6" (152mm) BadAss Strap Hinge (p.18)

CI3950 Barrel BadAss Hinge (p.18)

Product Number

Product Name

Gap Variance inch/mm

Fixing Method

For uphill gate installation and welding tips see pages 44 and 51.

Finish

# Of Sealed Bearings

Max Gate Weight lbs/kg

Max Gate Load lbs/kg

Yoke Mat’l

Body Mat’l

Height inch/ mm

Weight lbs/kg

CI3900

6" (152mm) Strap Hinge

Fixed 1/2" (13mm)

Weld

Zinc

4

1,500 lbs (680kg)

3,000 lbs (1,360kg)

Steel

Steel

5.9" (150mm)

6 lbs (2.7kg)

CI3925

10" (254mm) Strap Hinge

Fixed 1/2" (13mm)

Weld

Zinc

4

1,500 lbs (680kg)

3,000 lbs (1,360kg)

Steel

Steel

5.9" (150mm)

7.5 lbs (3.4kg)

CI3950

Barrel Hinge

Fixed 1/2" (13mm)

Bolt-on or Weld

Zinc

4

1,500 lbs (680kg)

3,000 lbs (1,360kg)

Steel

Steel

5.9" (150mm)

4.0 lbs (1.8kg)

CI3975

Uphill Strap Hinge Set*

Fixed 1/2" (13mm)

Weld

Zinc

4/4

1,500 lbs (680kg)

3,000 lbs (1,360kg)

Steel

Steel

5.9" (150mm)

13.5 lbs (6.1kg)

*Set comes with one CI3900 and one CI3925.

SHUT IT Gate Hardware

10

All weight ratings are based upon two hinges.

CI3925 10" (254mm) BadAss Strap Hinge (p.18)


SHUTIt

The HardCORE Wheels and Accessories

CI2240 HardCore Cantilever Wheel Assembly (p.27)

All weight ratings are based upon two wheels.

Product Number

CI2300 HardCore Gate Guide Assembly (p.29)

Product Name**

Fixing Method

CI2515 HardCore V-Groove Wheel with Carriage Plates (p.24)

CI2620 HardCore V-Groove Wheel (p.22)

Finish

# Of Sealed Bearings

Max Gate Weight lbs/kg

Max Gate Load lbs/kg

Wheel Mat’l

Carriage Plate Mat’l

Height inch/ mm

Weight lbs/kg

CI2140

4” (102mm) Carriage Plate Set - Steel ††

Weld

Zinc

-

-

-

Steel

Steel

4" (102mm)

2 lbs (1kg)

CI2140A

4” (102mm) Carriage Plate Set - Aluminum ††

Weld

Zinc

-

-

-

Steel

Alum

4" (102mm)

1.5 lbs (0.7kg)

CI2160

6” (152mm) Carriage Plate Set - Steel ††

Weld

Zinc

-

-

-

Steel

Steel

6" (152mm)

3.5 lbs (1.6kg)

CI2160A

6” (152mm) Carriage Plate Set - Aluminum ††

Weld

Zinc

-

-

-

Steel

Alum

6" (152mm)

2 lbs (1kg)

CI2240

4” (102mm) Cantilever Wheel Assembly

Weld

Zinc

2

1,500 lbs (680kg)

3,000 lbs (1,360kg)

Steel

Steel

6" (152mm)

5 lbs (2.3kg)

CI2260

6” (152mm) Cantilever Wheel Assembly

Weld

Zinc

2

1,500 lbs (680kg)

3,000 lbs (1,360kg)

Steel

Steel

8" (203mm)

10.5 lbs (4.8kg)

CI2300

Guide Assembly

Weld

Zinc

2

-

-

Steel

-

6" (152mm)

4 lbs (1.8kg)

CI2350

Extended Guide Assembly

Weld

Zinc

2

-

-

Steel

-

10" (254mm)

4.5 lbs (2kg)

CI2340

4” (102mm) Carriage Cap

Weld

Zinc

-

-

-

Steel

-

6" (152mm)

1 lbs (0.5kg)

CI2360

6” (152mm) Carriage Cap

Weld

Zinc

-

-

-

Steel

-

8" (203mm)

1.5 lbs (0.7kg)

CI2415

4” (102mm) Wheel - 1.5” (38mm) Frame

Bolts to plates

Zinc

2

1,500 lbs (680kg)

3,000 lbs (1,360kg)

Steel

-

4" (102mm)

4.5 lbs (2kg)

CI2420

4” (102mm) Wheel - 2.0” (51mm) Frame

Bolts to plates

Zinc

2

1,500 lbs (680kg)

3,000 lbs (1,360kg)

Steel

-

4" (102mm)

4.5 lbs (2kg)

CI2515

4” (102mm) Wheel - 1.5” (38mm) Frame Set *

Weld

Zinc

2

1,500 lbs (680kg)

3,000 lbs (1,360kg)

Steel

Steel

4" (102mm)

6 lbs (2.7kg)

CI2520

4” (102mm) Wheel - 2.0” (51mm) Frame Set *

Weld

Zinc

2

1,500 lbs (680kg)

3,000 lbs (1,360kg)

Steel

Steel

4" (102mm)

6 lbs (2.7kg)

CI2615

6” (152mm) Wheel - 1.5” (38mm) Frame

Bolts to plates

Zinc

2

2,200 lbs (1,000kg)

5,000 lbs (2,270kg)

Steel

-

6" (152mm)

9 lbs (4kg)

CI2620

6” (152mm) Wheel - 2.0” (51mm) Frame

Bolts to plates

Zinc

2

2,200 lbs (1,000kg)

5,000 lbs (2,270kg)

Steel

-

6" (152mm)

9.5 lbs (4.3kg)

CI2625

6” (152mm) Wheel - For Wheel Boxes †

Bolts to box

Zinc

2

2,200 lbs (1,000kg)

5,000 lbs (2,270kg)

Steel

-

6" (152mm)

9.5 lbs (4.3kg)

CI2715

6” (152mm) Wheel - 1.5” (38mm) Frame Set *

Weld

Zinc

2

2,200 lbs (1,000kg)

5,000 lbs (2,270kg)

Steel

Steel

6" (152mm)

12 lbs (5kg)

CI2720

6” (152mm) Wheel - 2.0” (51mm) Frame Set *

Weld

Zinc

2

2,200 lbs (1,000kg)

5,000 lbs (2,270kg)

Steel

Steel

6" (152mm)

12.5 lbs (6kg)

* Includes one wheel and two slotted carriage plates. ** All wheels include axle bolt, washers and lock nuts.

www.shutitgatehardware.com

† For retrofit/repair † † Set includes two slotted carriage plates.

11


The BadAss Gate Hinges

ZINC PLATED

5 Years On Bearings

The Original BadAss The ORIGINAL BadAss gate hinge by SHUT IT is CNC machined to the tightest tolerances in the industry. Due to SHUT IT’s unique bushing design The ORIGINAL, like all other SHUT IT gate hinges, produces near frictionless movement with maintenance free usage. KEY FEATURES • Two sealed maintenance free bearings (no greasing) • Adjustable yoke for perfect installations • Ideal for both flat and round post installations • Load rating per gate: 2,000 lbs (900kg) • Maximum gate weight: 1,100 lbs (500kg)

SKU

Gap Variance Inch/mm

Fixing Method

Finish

# Of Sealed Bearings

Yoke Mat'l

Body Mat'l

Height Inch/mm

Weight lbs/kg

CI3000

2.4-2.9" (61-74mm)

Weld

Zinc

2

Steel

Steel

3.8" (97mm)

2.5 lbs (1.1kg)

The Rusted Look Original BadAss The Rusted Look Original BadAss gate hinge is designed to blend in on fences with a rust patina. No zinc plating except on shaft, washer and lock nut. Due to SHUT IT’s unique bushing design The Rusted Look Original, like all other SHUT IT gate hinges, produces near frictionless movement with maintenance free usage. KEY FEATURES • Two sealed maintenance free bearings (no greasing) • Adjustable yoke for perfect installations • Ideal for both flat and round post installations • Load rating per gate: 2,000 lbs (900kg) • Maximum gate weight: 1,100 lbs (500kg)

SKU

Gap Variance Inch/mm

Fixing Method

Finish

# Of Sealed Bearings

Yoke Mat'l

Body Mat'l

Height Inch/mm

Weight lbs/kg

CI3100

2.4-2.9" (61-74mm)

Weld

Unfinished

2

Steel

Steel

3.8" (97mm)

2.5 lbs (1.1kg)

SHUT IT Gate Hardware

12


BADAss

ZINC PLATED

5 Years On Bearings

The BadAss Gate Hinges The Heavy Duty BadAss The HD (Heavy-Duty) BadAss Hinge is one mighty dude! Designed for the rarest of installations where even The ORIGINAL is not BAD enough. For these situations, SHUT IT has designed the HD to hold 50 percent more load than The ORIGINAL. Do not worry, as with all our BadAss hinges, the HD is CNC machined to the industry’s tightest tolerances. KEY FEATURES • Three sealed maintenance free bearings (no greasing) • Adjustable yoke for perfect installations • Ideal for both round and flat post installations • Load rating per gate: 3,000 lbs (1,360kg) • Maximum gate weight: 1,500 lbs (680kg)

SKU

Gap Variance Inch/mm

Fixing Method

Finish

# Of Sealed Bearings

Yoke Mat'l

Body Mat'l

Height Inch/mm

Weight lbs/kg

CI3500

2.4-2.9" (61-74mm)

Weld

Zinc

3

Steel

Steel

3.8" (97mm)

3.5 lbs (1.6kg)

The 100 Year BadAss Hinge SHUT IT’s biggest and baddest gate hinge is so durable our standard lifetime warranty does not do it justice. Therefore, we decided to warranty the product for 100 years. The Hundred Year Hinge uses the unique SHUT IT bushing design with upgraded hardware for additional strength and longevity. KEY FEATURES • Three sealed maintenance free bearings (no greasing) • Adjustable yoke for perfect installations • Ideal for both round and flat post installations • Upgraded yoke and grade 8 bolt (Shaft) • Load rating per gate: 3,000 lbs (1,360kg) • Maximum gate weight: 1,500 lbs (680kg)

SKU

Gap Variance Inch/mm

Fixing Method

Finish

# Of Sealed Bearings

Yoke Mat'l

Body Mat'l

Height Inch/mm

Weight lbs/kg

CI3520

2.5-3.0" (64-76mm)

Weld

Zinc

3

Steel

Steel

4.1" (104mm)

3.5 lbs (1.6kg)

www.shutitgatehardware.com

13


The BadAss Gate Hinges

ZINC PLATED

5 Years On Bearings

The Stainless BadAss Like The ORGINAL BadAss, The Stainless Steel BadAss Gate Hinge by SHUT IT is CNC machined to the tightest tolerances in the industry. However, for this hinge we went all out and used stainless steel for ALL the components. Yes, we said ALL components (even the bearings). KEY FEATURES • 304 stainless steel includes the bearings, shaft (bolt), washers and lock nut • Two sealed maintenance free bearings (no greasing) • Adjustable yoke for perfect installations • Ideal for both flat and round post installations • Load rating per gate: 2,000 lbs (900kg) • Maximum gate weight: 1,100 lbs (500kg)

SKU

Gap Variance Inch/mm

Fixing Method

Finish

# Of Sealed Bearings

Yoke Mat'l

Body Mat'l

Height Inch/mm

Weight lbs/kg

CI3800

2.4-2.9" (61-74mm)

Weld

Unfinished

2

Stainless

Stainless

3.8" (97mm)

2.5 lbs (1.1kg)

The Aluminum BadAss Like The ORGINAL BadAss, The Aluminum BadAss Gate Hinge by SHUT IT is CNC machined to the tightest tolerances in the industry. Unlike The ORIGINAL, the Aluminum BadAss is made out off aluminum. Due to SHUT IT’s unique bushing design The Aluminum BadAss, like all other SHUT IT gate hinges, produces near frictionless movement with maintenance free usage. KEY FEATURES • Two sealed maintenance free bearings (no greasing) • Adjustable yoke for perfect installations • Ideal for both flat and round post installations • Load rating per gate: 1,000 lbs (450kg) • Maximum gate weight: 600 lbs (270kg)

SKU

Gap Variance Inch/mm

Fixing Method

Finish

# Of Sealed Bearings

Yoke Mat'l

Body Mat'l

Height Inch/mm

Weight lbs/kg

CI3400

2.4-2.9" (61-74mm)

Weld

Unfinished

2

Alum

Alum

3.8" (97mm)

2 lbs (1kg)

SHUT IT Gate Hardware

14


BADAss

ZINC PLATED

5 Years On Bearings

The BadAss Gate Hinges The Combo BadAss with Steel Body The Combo BadAss Gate Hinge was designed using the same technology as all our BIG hinges, but with the understanding that not all installations are exclusively steel or aluminum. This Combo BadAss is perfect for welding gates upside down, or in the rare cases where you have an aluminum endpost and a steel gate. KEY FEATURES • Two sealed maintenance free bearings (no greasing) • Slotted for easy adjustment • Round or plate post installations • Load rating per gate: 1,000 lbs (450kg) • Maximum gate weight: 600 lbs (270kg)

SKU

Gap Variance Inch/mm

Fixing Method

Finish

# Of Sealed Bearings

Yoke Mat'l

Body Mat'l

Height Inch/mm

Weight lbs/kg

CI3200

2.4-2.9" (61-74mm)

Weld

Unfinished / Zinc

2

Alum

Steel

3.8" (97mm)

2.5 lbs (1.1kg)

The Combo BadAss with Aluminum Body The Combo BadAss Gate Hinge was designed using the same technology as all our BIG hinges, but with the understanding that not all installations are exclusively steel or aluminum. The Combo BadAss is perfect for that high-end installation where an alumunum gate is welded to a steel endpost in the field. KEY FEATURES • Two sealed maintenance free bearings (no greasing) • Adjustable yoke for perfect installations • Ideal for flat post installations • Load rating per gate: 1,000 lbs (450kg) • Maximum gate weight: 600 lbs (270kg)

SKU

Gap Variance Inch/mm

Fixing Method

Finish

# Of Sealed Bearings

Yoke Mat'l

Body Mat'l

Height Inch/mm

Weight lbs/kg

CI3300

2.4-2.9" (61-74mm)

Weld

Zinc/ Unfinished

2

Steel

Alum

3.8" (97mm)

2 lbs (1kg)

www.shutitgatehardware.com

15


The BadAss Gate Hinges

ZINC PLATED

5 Years On Bearings

The Baby BadAss Made with the same BadAss technology but designed for the lighter side, the Baby BadAss is the perfect gate hinge for high-end pedestrian gates and low usage drive entry gates. KEY FEATURES • One sealed maintenance free bearing (no greasing) • Slotted for easy adjustment • Ideal for flat or round post installations • Load rating per gate: 500 lbs (230kg) • Maximum gate weight: 300 lbs (140kg)

SKU

Gap Variance Inch/mm

Fixing Method

Finish

# Of Sealed Bearings

Yoke Mat'l

Body Mat'l

Height Inch/mm

Weight lbs/kg

CI3600

2.5-3.0" (64-76mm)

Weld

Zinc

1

Steel

Steel

1.3" (33mm)

1 lbs (0.5kg)

The Rusted Look Baby BadAss The Rusted Look Baby BadAss gate hinge is designed to blend in on fences with a rust patina. No zinc plating except on shaft, washer and lock nut. Made with the same BadAss technology used for BIG hinges, but designed for the lighter side, the Rusted Look Baby BadAss is the perfect gate hinge for high-end pedestrian gates and low usage drive entry gates. KEY FEATURES • One sealed maintenance free bearing (no greasing) • Slotted for easy adjustment • Round or plate post installations • Load rating per gate: 500 lbs (230kg) • Maximum gate weight: 300 lbs (140kg)

SKU

Gap Variance Inch/mm

Fixing Method

Finish

# Of Sealed Bearings

Yoke Mat'l

Body Mat'l

Height Inch/mm

Weight lbs/kg

CI3620

2.5-3.0" (64-76mm)

Weld

Unfinished

1

Steel

Steel

1.3" (33mm)

1 lbs (0.5kg)

SHUT IT Gate Hardware

16


The BadAss Gate Hinges The Aluminum Baby BadAss Made with the same BadAss technology as our BIG hinges, but designed for the lighter side, The Aluminum Baby BadAss is the perfect gate hinge for high-end aluminum pedestrian gates and low usage drive entry gates.

BADAss

ZINC PLATED

5 Years On Bearings

KEY FEATURES • One sealed maintenance free bearing (no greasing) • Slotted for easy adjustment • Round or plate post installations • Load rating per gate: 500 lbs (230kg) • Maximum gate weight: 300 lbs (140kg)

SKU

Gap Variance Inch/mm

Fixing Method

Finish

# Of Sealed Bearings

Yoke Mat'l

Body Mat'l

Height Inch/mm

Weight lbs/kg

CI3650

2.5-3.0" (64-76mm)

Weld

Unfinished

1

Alum

Alum

1.3" (33mm)

0.5 lbs (0.2kg)

The Combo Baby BadAss Made with the same BadAss technology as our BIG hinges, but designed for the lighter side, The Baby BadAss Combo is the perfect gate hinge for high-end aluminum pedestrian gates and low usage drive entry gates that are welded to steel end post in the field. KEY FEATURES • One sealed maintenance free bearing (no greasing) • Slotted for easy adjustment • Round or plate post installations • Load rating per gate: 500 lbs (230kg) • Maximum gate weight: 300 lbs (140kg)

SKU

Gap Variance Inch/mm

Fixing Method

Finish

# Of Sealed Bearings

Yoke Mat'l

Body Mat'l

Height Inch/mm

Weight lbs/kg

CI3670

2.5-3.0" (64-76mm)

Weld

Zinc/ Unfinished

1

Steel

Alum

1.3" (33mm)

1 lbs (0.5kg)

www.shutitgatehardware.com

17


The BADAss Barrel Hinges

ZINC PLATED

5 Years On Bearings

The BadAss Strap Hinge One of SHUT IT Gate Hardware’s newest gate hinges, the BadAss Strap Hinge, is a barrel hinge that includes an extended 10” (254mm) strap for convienent and flexible gate installations. The strap hinge is also one of SHUT IT’s strongest gate hinges with more bearing load than any hinge on the market. KEY FEATURES • Four sealed maintenance free bearings (no greasing) • Ideal for flat post installation • Limited lifetime warranty (5 years on bearings) • Swings 1800 • Load rating per gate: 3,000 lbs (1,360kg) • Maximum gate weight: 1,500 lbs (680kg) Gap Variance Inch/mm

Fixing Method

Finish

# Of Sealed Bearings

Yoke Mat'l

Body Mat'l

Height Inch/mm

Weight lbs/kg

CI3900 6" (152mm) Strap Hinge

Fixed 1⁄2" (13mm)

Weld

Zinc

4

Steel

Steel

5.9" (150mm)

6 lbs (2.7kg)

CI3925 10" (254mm) Strap Hinge

Fixed 1⁄2" (13mm)

Weld

Zinc

4

Steel

Steel

5.9" (150mm)

7.5 lbs (3.4kg)

CI3975 Uphill Strap Hinge Set*

Fixed 1⁄2" (13mm)

Weld

Zinc

4/4

Steel

Steel

5.9" (150mm)

13.5 lbs (6.1kg)

SKU

Product Name

* Set comes with one CI3900 and one CI3925

The BadAss Barrel Hinge The BadAss Barrel Hinge from SHUT IT Gate Hardware is the strongest and most versatile gate hinge on the market. Ideal for nearly all heavy-duty gate installations the BadAss Barrel Hinge is the game changer in the industry. The gate hinge can be installed where a full 180 degree gate opening is required and has the ability to reduce the gap between end post and gate to under 1⁄2” (13mm). KEY FEATURES • Four sealed maintenance free bearings (no greasing) • For flat post installations • Bolt-on and weld-on installations • Swings 1800 • Load rating per gate: 3,000 lbs (1,360kg) • Maximum gate weight: 1,500 lbs (680kg) SKU

Gap Variance Inch/mm

Fixing Method

Finish

# Of Sealed Bearings

Yoke Mat'l

Body Mat'l

Height Inch/mm

Weight lbs/kg

CI3950

Fixed 1⁄2" (13mm)

Bolt-on or Weld

Zinc

4

Steel

Steel

5.9" (150mm)

4.0 lbs (1.8kg)

SHUT IT Gate Hardware

18


The Self-Closing BadAss Hinge Set With the BadAss Self-Closing Hinge you no longer need a separate closer for jobs that require a self-closing gate. The closer is built into the hinge! Get the benefits of the best heavy duty gate hinges and a reliable closer in one package. Save hundreds on poorly designed gate closers and hydralic door closers that are adapted to gate systems.

BADAss

The BadAss Gate Hinges

ZINC PLATED

5 Years On Bearings

KEY FEATURES • Two sealed maintenance free bearings (no greasing) • Easy to install, heavy duty self-closing hinge • Set includes one self-closing hinge and one Original BadAss hinge • Adjustable yoke for perfect installations • 5 Tension adjustment settings • Load rating per gate: 2,000 lbs (500kg) • Self-closing maximum gate weight: 300 lbs (130kg) • Gate swings from -50 to 1100

SKU

Gap Variance Inches

Fixing Method

Finish

# Of Sealed Bearings

Self-closing Max Weight

Yoke Mat'l

Body Mat'l

Height Inch/mm

Weight lbs/kg

CI3850

2.4-2.9" (61-74mm)

Weld

Zinc

2/2

300 lbs (130kg)

Steel

Steel

5" (127mm)

5.5 lbs (2.5kg)

* Set comes with one self-closing hinge plus one CI3000

The Bolt-On BadAss Hinge The Bolt-On BadAss was designed to be used on gates where welding the hinges to the gate and the end post is not an option. Due to SHUT IT’s unique bushing design The Bolt-On BadAsses, like all other SHUT IT gate hinges, produces near frictionless movement with maintenance free usage. KEY FEATURES • Two sealed maintenance free bearings (no greasing) • Yoke for perfect installations • For flat post installations • Load rating per gate: 2,000 lbs (900kg) • Maximum gate weight: 1,000 lbs (450kg) SKU

Gap Variance Inch/mm

Fixing Method

Finish

# Of Sealed Bearings

Yoke Mat'l

Body Mat'l

Height Inch/mm

Weight lbs/kg

CI3700

2.9-3.4" (74-86mm)

Bolt-On

Zinc

2

Steel

Steel

7.5" (191mm)

3.5 lbs (1.6kg)

www.shutitgatehardware.com

19


The BadAss Gate Hinges

ZINC PLATED

5 Years On Bearings

The 4" (102mm) Round Bolt-On BadAss Like The ORIGINAL, all bolt-on gate hinges by SHUT IT are CNC machined to the tightest tolerances in the industry. Unlike The ORIGINAL, the 4" (102mm) Round Bolt-On BadAss is is designed to strap around a 4" (102mm) round post and to a flat gate frame. The Bolt-On BadAsses produce near frictionless movement with maintenance free usage. KEY FEATURES • Two sealed maintenance free bearings (no greasing) • Adjustable yoke for perfect installations • Ideal for flat or round post installations • Zinc plated • Load rating per gate: 2,000 lbs (900kg) • Maximum gate weight: 1,000 lbs (450kg)

SKU

Gap Variance Inch/mm

Fixing Method

Finish

# Of Sealed Bearings

Yoke Mat'l

Body Mat'l

Height Inch/mm

Weight lbs/kg

CI2051

2.7-3.2" (69-81mm)

Bolt-On

Zinc

2

Steel

Steel

7.5" (191mm)

5 lbs (2.3kg)

The 6" (152mm) Round Bolt-On BadAss Like THE ORIGINAL, all bolt-on gate hinges by SHUT IT are CNC machined to the tightest tolerances in the industry. Unlike The ORIGINAL, the 6" (152mm) Round Bolt-On BadAss is is designed to strap around a 6" (152mm) round post and to a flat gate frame. The Bolt-On BadAsses produce near frictionless movement with maintenance free usage. KEY FEATURES • Two sealed maintenance free bearings (no greasing) • Adjustable yoke for perfect installations • Ideal for flat or round post installations • Zinc plated • Load rating per gate: 2,000 lbs (900kg) • Maximum gate weight: 1,000 lbs (450kg) SKU

Gap Variance Inch/mm

Fixing Method

Finish

# Of Sealed Bearings

Yoke Mat'l

Body Mat'l

Height Inch/mm

Weight lbs/kg

CI2053

2.7-3.2" (69-81mm)

Bolt-On

Zinc

2

Steel

Steel

7.5" (191mm)

10 lbs (4.5kg)

SHUT IT Gate Hardware

20


BADAss

ZINC PLATED

5 Years On Bearings

The BadAss Gate Hinges The Half Bolt-On BadAss Like with The ORIGINAL, all bolt-on gate hinges by SHUT IT are CNC machined to the tightest tolerances in the industry. Unlike The ORIGINAL, The Half Bolt-On BadAss was designed to be used on gates where welding the hinges to the end post is not an option (no field welder). The Half Bolt-On BadAsses produce near frictionless movement with maintenance free usage. KEY FEATURES • Two sealed maintenance free bearings (no greasing) • Adjustable yoke for perfect installations • Flat bolt-on brackets for through bolting • Zinc Plated • Load rating per gate: 2,000 lbs (900kg) • Maximum gate weight: 1,000 lbs (450kg)

SKU

Gap Variance Inch/mm

Fixing Method

Finish

# Of Sealed Bearings

Yoke Mat'l

Body Mat'l

Height Inch/mm

Weight lbs/kg

CI3770

2.65-3.15" (67-80mm)

Bolt-On / Weld

Zinc

2

Steel

Steel

7.5" (191mm)

2.5 lbs (1.1kg)

The Bolt-On Baby BadAss Like the Bady BadAss, this hinge Bolt-on Gate Hinge by SHUT IT is CNC machined to the tightest tolerances in the industry. Unlike The Baby BadAss, The Bolt-On Bady BadAss was designed to be used on smaller gates where welding the hinges to the gate and the end post is not an option. The Bolt-On BadAsses produce near frictionless movement with maintenance free usage. KEY FEATURES • One sealed maintenance free bearing (no greasing) • Adjustable yoke for perfect installations • Flat bolt-on brackets for through bolting • Zinc plated • Load rating per gate: 600 lbs (270kg) • Maximum gate weight: 250 lbs (100kg) SKU

Gap Variance Inch/mm

Fixing Method

Finish

# Of Sealed Bearings

Yoke Mat'l

Body Mat'l

Height Inch/mm

Weight lbs/kg

CI3750

3.0-3.5" (76-89mm)

Bolt-On

Zinc

1

Steel

Steel

4.0" (102mm)

2.0 lbs (1kg)

www.shutitgatehardware.com

21


The HardCORE

ZINC PLATED

5 Years On Bearings

The 4" (102mm) HardCORE V-Groove Wheel for 11⁄2” (38mm) Gate Frame The 4" (102mm) of HardCORE V-Groove Wheel for 11⁄2” (38mm) Gate Frame is designed to be used on a gate with a 11⁄2” (38mm) bottom rail. This wheel does not include carriage plates, so the user will have provide their own wheel box or plate system. All HardCORE wheels use SHUT IT’s unique bushing design, which fully utilizes the roller bearings. KEY FEATURES • Two sealed maintenance free bearings (no greasing) • Adjustable plates for perfect installations • Only 11⁄8” (29mm) wide to reduce friction and debris issues • Super-hard cold rolled steel (30RC rating) • Load rating per gate: 3,000 lbs (1,360kg) • Maximum gate weight: 1,500 lbs (680kg)

SKU

Fixing Method

Finish

# Of Sealed Bearings

Wheel Mat'l

Carriage Plate Mat'l

Height Inch/mm

Weight lbs/kg

CI2415

Bolts to plates

Zinc

2

Steel

-

4" (102mm)

4.5 lbs (2kg)

The 4" (102mm) HardCORE V-Groove Wheel for 2" (51mm) Gate Frame The 4" (102mm) of HardCORE V-Groove Wheel for 2" (51mm) Gate Frame is designed to be used on a gate with a 2" (51mm) bottom rail. This wheel does not include carriage plates, so the user will have provide their own wheel box or plate system. All HardCORE wheels use SHUT IT’s unique bushing design, which fully utilizes the roller bearings. KEY FEATURES • Two sealed maintenance free bearings (no greasing) • Adjustable plates for perfect installations • Only 11⁄8” (29mm) wide to reduce friction and debris issues • Super-hard cold rolled steel (30RC rating) • Load rating per gate: 3,000 lbs (1,360kg) • Maximum gate weight: 1,500 lbs (680kg) SKU

Fixing Method

Finish

# Of Sealed Bearings

Wheel Mat'l

Carriage Plate Mat'l

Height Inch/mm

Weight lbs/kg

CI2420

Bolts to plates

Zinc

2

Steel

-

4" (102mm)

4.5 lbs (2kg)

SHUT IT Gate Hardware

22


The 6" (152mm) HardCORE V-Groove Wheel for 11⁄2” (38mm) Gate Frame The 6" (152mm) of HardCORE V-Groove Wheel for 11⁄2” (38mm) Gate Frame is designed to be used on a gate with a 11⁄2” (38mm) bottom rail. This wheel does not include carriage plates, so the installer will have to use alternative instalation technique. All HardCORE wheels use SHUT IT’s unique bushing design, which fully utilizes the roller bearings.

HARDCore

The HardCORE

ZINC PLATED

5 Years On Bearings

KEY FEATURES • Two sealed maintenance free bearings (no greasing) • Adjustable plates for perfect installations • Only 11⁄8” (29mm) wide to reduce friction and debris issues • Super-hard cold rolled steel (30RC rating) • Load rating per gate: 5,000 lbs (2,270kg) • Maximum gate weight: 2,200 lbs (1,000kg)

SKU

Fixing Method

Finish

# Of Sealed Bearings

Wheel Mat'l

Carriage Plate Mat'l

Height Inch/mm

Weight lbs/kg

CI2615

Bolts to plates

Zinc

2

Steel

-

6" (152mm)

9 lbs (4kg)

The 6" (152mm) HardCORE V-Groove Wheel for 2” (51mm) Gate Frame The 6" (152mm) of HardCORE V-Groove Wheel for 2" (51mm) Gate Frame is designed to be used on a gate with a 2" (51mm) bottom rail. This wheel does not include carriage plates, so the installer will have to use alternative instalation technique. All HardCORE wheels use SHUT IT’s unique bushing design, which fully utilizes the roller bearings. KEY FEATURES • Two sealed maintenance free bearings (no greasing) • Adjustable plates for perfect installations • Only 11⁄8” (29mm) wide to reduce friction and debris issues • Super-hard cold rolled steel (30RC rating) • Load rating per gate: 5,000 lbs (2,270kg) • Maximum gate weight: 2,200 lbs (1,000kg) SKU

Fixing Method

Finish

# Of Sealed Bearings

Wheel Mat'l

Carriage Plate Mat'l

Height Inch/mm

Weight lbs/kg

CI2620

Bolts to plates

Zinc

2

Steel

-

6" (152mm)

9.5 lbs (4.3kg)

www.shutitgatehardware.com

23


The HardCORE

ZINC PLATED

5 Years On Bearings

The 4” (102mm) HardCORE with Carriage Plates for 11⁄2” (38mm) Gate Frame The 4” (102mm) of HardCORE V-Groove Wheel for 11⁄2” (38mm) Gate Frame is designed to be used on a gate with a 11⁄2” (38mm) bottom rail. This wheel includes a set of SHUT IT 4” (102mm) HardCORE Carriage Plates, which make for the ideal UL325-compatible installation. All HardCORE wheels use SHUT IT’s unique bushing design, which fully utilizes the roller bearings. KEY FEATURES • Two sealed maintenance free bearings (no greasing) • Adjustable plates for perfect installations • Only 11⁄8” (29mm) wide to reduce friction and debris issues • Super-hard cold rolled steel (30RC rating) • Load rating per gate: 3,000 lbs (1,360kg) • Maximum gate weight: 1,500 lbs (680kg)

SKU

Fixing Method

Finish

# Of Sealed Bearings

Wheel Mat'l

Carriage Plate Mat'l

Height Inch/mm

Weight lbs/kg

CI2515

Weld

Zinc

2

Steel

Steel

4" (102mm)

6 lbs (2.7kg)

The 4” (102mm) HardCORE with Carriage Plates for 2” (51mm) Gate Frame The 4” (102mm) of HardCORE V-Groove Wheel for 2” (51mm) Gate Frame is designed to be used on a gate with a 2” (51mm) bottom rail. This wheel includes a set of SHUT IT 4” (102mm) HardCORE Carriage Plates, which make for the ideal UL325-compatible installation. All HardCORE wheels use SHUT IT’s unique bushing design, which fully utilizes the roller bearings. KEY FEATURES • Two sealed maintenance free bearings (no greasing) • Adjustable plates for perfect installations • Only 11⁄8” (29mm) wide to reduce friction and debris issues • Super-hard cold rolled steel (30RC rating) • Load rating per gate: 3,000 lbs (1,360kg) • Maximum gate weight: 1,500 lbs (680kg) SKU

Fixing Method

Finish

# Of Sealed Bearings

Wheel Mat'l

Carriage Plate Mat'l

Height Inch/mm

Weight lbs/kg

CI2520

Weld

Zinc

2

Steel

Steel

4" (102mm)

6 lbs (2.7kg)

SHUT IT Gate Hardware

24


The 6” (152mm) HardCORE w/ Carriage Plates for 11⁄2” (38mm) Gate Frame The 6” (152mm) of HardCORE V-Groove Wheel for 11⁄2” (38mm) Gate Frame is designed to be used on a gate with a 11⁄2” (38mm) bottom rail. This wheel includes a set of SHUT IT 6” (152mm) HardCORE Carriage Plates, which make for the ideal UL325-compatible installation. All HardCORE wheels use SHUT IT’s unique bushing design, which fully utilizes the roller bearings.

HARDCore

The HardCORE

ZINC PLATED

5 Years On Bearings

KEY FEATURES • Two sealed maintenance free bearings (no greasing) • Adjustable plates for perfect installations • Only 11⁄8” (29mm) wide to reduce friction and debris issues • Super-hard cold rolled steel (30RC rating) • Load rating per gate: 5,000 lbs (2,270kg) • Maximum gate weight: 2,200 lbs (1,000kg)

SKU

Fixing Method

Finish

# Of Sealed Bearings

Wheel Mat'l

Carriage Plate Mat'l

Height Inch/mm

Weight lbs/kg

CI2715

Weld

Zinc

2

Steel

Steel

6" (152mm)

12 lbs (5kg)

The 6” (152mm) HardCORE w/ Carriage Plates for 2” (51mm) Gate Frame The 6” (152mm) of HardCORE V-Groove Wheel for 2” (51mm) Gate Frame is designed to be used on a gate with a 2” (51mm) bottom rail. This wheel includes a set of SHUT IT 6” (152mm) HardCORE Carriage Plates, which make for the ideal UL325-compatible installation. All HardCORE wheels use SHUT IT’s unique bushing design, which fully utilizes the roller bearings. KEY FEATURES • Two sealed maintenance free bearings (no greasing) • Adjustable plates for perfect installations • Only 11⁄8” (29mm) wide to reduce friction and debris issues • Super-hard cold rolled steel (30RC rating) • Load rating per gate: 5,000 lbs (2,270kg) • Maximum gate weight: 2,200 lbs (1,000kg) SKU

Fixing Method

Finish

# Of Sealed Bearings

Wheel Mat'l

Carriage Plate Mat'l

Height Inch/mm

Weight lbs/kg

CI2720

Weld

Zinc

2

Steel

Steel

6" (152mm)

12.5 lbs (6kg)

www.shutitgatehardware.com

25


The HardCORE

ZINC PLATED

5 Years On Bearings

The Steel HardCORE Carriage Plate The STEEL version of the SHUT IT original gate wheel mounting system for 4” (102mm) or 6” (152mm) gate wheels. Carriage Plates replace traditional wheel boxes and enable you to install the HardCORE Gate Wheel inside the bottom rail of the gate itself. KEY FEATURES • Adjustable plates for perfect installation • Models for 4” (102mm) and 6” (152mm) wheels • Available in steel and aluminum • Two steel and two aluminum models fit all sizes of gate frames • No need for bulky and heavy wheel boxes • Combine with carriage caps for chain link applications

SKU

Fixing Method

Finish

# Of Sealed Bearings

Wheel Mat'l

Carriage Plate Mat'l

Height Inch/mm

Weight lbs/kg

CI2140

Weld

Zinc

-

Steel

Steel

4" (102mm)

2 lbs (1kg)

CI2160

Weld

Zinc

-

Steel

Steel

6" (152mm)

3.5 lbs (1.6kg)

The Aluminum HardCORE Carriage Plate The Aluminum version of the SHUT IT original gate wheel mounting system for 4” (102mm) or 6” (152mm) gate wheels. Carriage Plates replace traditional wheel boxes and enable you to install the HardCORE Gate Wheel inside the bottom rail of the gate itself. KEY FEATURES • Adjustable plates for perfect installation • Models for 4” (102mm) and 6” (152mm) wheels • Available in steel and aluminum • Two steel and two aluminum models fit all sizes of gate frames • No need for bulky and heavy wheel boxes • Combine with carriage caps for chain link applications SKU

Fixing Method

Finish

# Of Sealed Bearings

Wheel Mat'l

Carriage Plate Mat'l

Height Inch/mm

Weight lbs/kg

CI2140A

Weld

Zinc

-

Steel

Aluminum

4" (102mm)

1.5 lbs (0.7kg)

CI2160A

Weld

Zinc

-

Steel

Aluminum

6" (152mm)

2 lbs (1kg)

SHUT IT Gate Hardware

26


HARDCore

The HardCORE

ZINC PLATED

5 Years On Bearings

The 4” (102mm) HardCORE Cantilever Wheel Assembly

With this assembly a wheel can be installed on a rail rather than on a v-track on the ground surface. These installations are ideal when installing a track on the ground is not feasible. Whether it is on a full cantilever gate system or the SHUT IT designed semi and quarter cantilever system, the HardCORE Cantilever Wheel Assembly is a perfect solution for the odd job. KEY FEATURES • Two sealed maintenance free bearings (no greasing) • Adjustable plates for perfect installations • Only 11⁄8” (29mm) wide to reduce friction and debris issues • Super-hard cold rolled steel (30RC rating) • Load rating per gate: 3,000 lbs (1,360kg) • Maximum gate weight: 1,500 lbs (680kg) SKU

Fixing Method

Finish

# Of Sealed Bearings

Wheel Mat'l

Carriage Plate Mat'l

Height Inch/mm

Weight lbs/kg

CI2240

Weld

Zinc

2

Steel

Steel

6" (152mm)

5 lbs (2.3kg)

The 6” (152mm) HardCORE Cantilever Wheel Assembly With this assembly a wheel can be installed on a rail rather than on a v-track on the ground surface. These installations are ideal when installing a track on the ground is not feasible. Whether it is on a full cantilever gate system or the SHUT IT designed semi and quarter cantilever system, the HardCORE Cantilever Wheel Assembly is a perfect solution for the odd job. KEY FEATURES • Two sealed maintenance free bearings (no greasing) • Adjustable plates for perfect installations • Only 11⁄8” (29mm) wide to reduce friction and debris issues • Super-hard cold rolled steel (30RC rating) • Load rating per gate: 3,000 lbs (1,360kg) • Maximum gate weight: 1,500 lbs (680kg) SKU

Fixing Method

Finish

# Of Sealed Bearings

Wheel Mat'l

Carriage Plate Mat'l

Height Inch/mm

Weight lbs/kg

CI2260

Weld

Zinc

2

Steel

Steel

8" (203mm)

10.5 lbs (4.8kg)

www.shutitgatehardware.com

27


The HardCORE

ZINC PLATED

5 Years On Bearings

The 6" (152mm) HardCORE Wheel for Wheel Boxes The 6” (152mm) of HardCORE V-Groove Wheel for Wheel Boxes is designed to be used on a gate with a standard 6" (152mm) wheel box. This wheel does not include carriage plates and is ideal for use with existing wheel boxes in a "retrofit" repair. All HardCORE wheels use SHUT IT’s unique bushing design, which fully utilizes the roller bearings. KEY FEATURES • Two sealed maintenance free bearings (no greasing) • Adjustable plates for perfect installations • Only 11⁄8” (29mm) wide to reduce friction and debris issues • Super-hard cold rolled steel (30RC rating) • Load rating per gate: 5,000 lbs (2,270kg) • Maximum gate weight: 2,200 lbs (1,000kg) SKU

Fixing Method

Finish

# Of Sealed Bearings

Wheel Mat'l

Carriage Plate Mat'l

Height Inch/mm

Weight lbs/kg

CI2625

Bolts to plates

Zinc

2

Steel

-

6" (152mm)

9.5 lbs (4.3kg)

The HardCORE Carriage Cap The HardCORE Carriage Cap allows you to use SHUT IT’s carriage plates on a round bottom rail. The “adaptor” is perfect for chainlink gates and creates same UL325friendly system that the HardCORE Carriage Caps do with ornamental gates. Designed to be used with the CI2420 [4" (102mm)] and CI2620 [6" (152mm)] HardCORE V-Groove Wheels. KEY FEATURES • Easy to install - See page 50 • High strength steel • 4" (102mm) wheel carriage cap • 6" (152mm) wheel carriage cap

SKU

Fixing Method

Finish

# Of Sealed Bearings

Wheel Mat'l

Carriage Plate Mat'l

Height Inch/mm

Weight lbs/kg

CI2340

Weld

Zinc

-

Steel

-

6" (152mm)

1 lbs (0.5kg)

CI2360

Weld

Zinc

-

Steel

-

8" (203mm)

1.5 lbs (0.7kg)

SHUT IT Gate Hardware

28


The HardCORE Gate Guide Assembly The HardCORE Guide Assembly is a smartass design by SHUT IT that replaces the industry standard guide rollers. Simply weld a 21⁄2 x 21⁄2” (64 x 64mm) angle iron to your gate and attached the Guide Assembly to the endpost. This standard version of the Guide Assembly is ideal for installations that do not have grade variations through the run distance of the gate.

HARDCore

The HardCORE

ZINC PLATED

5 Years On Bearings

KEY FEATURES • Two sealed maintenance free bearings (no greasing) • Super hard steel • Zinc finish

SKU

Fixing Method

Finish

# Of Sealed Bearings

Wheel Mat'l

Carriage Plate Mat'l

Height Inch/mm

Weight lbs/kg

CI2300

Weld

Zinc

2

Steel

-

6" (152mm)

4 lbs (1.8kg)

The Extended HardCORE Gate Guide Assembly The HardCORE Guide Assembly is a smartass design by SHUT IT that replaces the industry standard guide rollers. Simply weld a 21⁄2 x 21⁄2” (64 x 64mm) angle iron to your gate and attached the Guide Assembly to the endpost. This Extended version of the Guide Assembly is ideal for installations that have grade variations through the run distance of the gate. KEY FEATURES • Two sealed maintenance free bearings (no greasing) • Super hard steel • Zinc finish

SKU

Fixing Method

Finish

# Of Sealed Bearings

Wheel Mat'l

Carriage Plate Mat'l

Height Inch/mm

Weight lbs/kg

CI2350

Weld

Zinc

2

Steel

-

10" (254mm)

4.5 lbs (2kg)

www.shutitgatehardware.com

29


Product Dimensions

The Original BadAss CI3000

.2” (5mm)

2.4 TO 2.9” (61-74mm) (ADJUSTABLE)

1.7” (43mm)

3.8” 2.8 (97-mm) (71mm)”

1.25” (32mm)

1.5” (38mm)

1.5” (38mm)

1.1 TO 1.5” (28-38mm) (ADJUSTABLE)

The Rusted Original BadAss CI3100

.2” (5mm)

2.4 TO 2.9” (61-74mm) (ADJUSTABLE)

1.7” 1.5” (43mm) (38mm)

3.8” (97mm)

2.8” (71mm)

1.25” (32mm)

1.5” (38mm)

1.1 TO 1.5” (28-38mm) (ADJUSTABLE)

The Combo BadAss with Steel Body CI3200

.2” (5mm)

2.4 TO 2.9” (61-74mm) (ADJUSTABLE)

1.7” 1.5” (43mm) (38mm)

3.8” (97mm)

2.8” (71mm)

1.5” (38mm)

1.1 TO 1.5” (28-38mm) (ADJUSTABLE)

SHUT IT Gate Hardware

30

1.25” (32mm)


The Combo BadAss with Aluminum Body CI3300

.2” (5mm)

2.4 TO 2.9” (61-74mm) (ADJUSTABLE) 3.8” 2.8” (97mm) (71mm)

1.75” (44mm)

1.5” (38mm)

1.5” 1.7” 43(mm) (38mm)

1.1 TO 1.5” (28-38mm) (ADJUSTABLE)

The Aluminum BadAss CI3400

.2” (5mm)

2.4 TO 2.9” (61-74mm) (ADJUSTABLE) 3.8” 2.8” (97mm) (71mm)

1.75” (44mm)

1.5” (38mm)

1.5” 1.7” 43(mm) (38mm)

1.1 TO 1.5” (28-38mm) (ADJUSTABLE)

The Heavy Duty BadAss CI3500

.2” (5mm)

2.4 TO 2.9” (61-74mm) (ADJUSTABLE) 3.8” 2.8” (97mm) (71mm)

1.5” 1.7” 43(mm) (38mm)

1.5” (38mm)

1.1 TO 1.5” (28-38mm) (ADJUSTABLE)

www.shutitgatehardware.com

31

1.75” (44mm)

Dimensions

Product Dimensions


Product Dimensions

The 100 Year BadAss CI3520

.3” (8mm)

2.5 TO 3” (64-76mm) (ADJUSTABLE)

3.1” 4.1” (104mm) (79mm) 1.7” (43mm)

1.5” (38mm)

1.75” (44mm)

1.5” (38mm)

1.2 TO 1.7” (30-43mm) (ADJUSTABLE)

The Baby BadAss CI3600

1.4” (36mm) (FIXED)

2.5 TO 3” (64-76mm) (ADJUSTABLE)

1.5” (38mm)

1.2 TO 1.7” (30-43mm) (ADJUSTABLE)

1.3” (33mm) .75” (19mm)

1.8” (46mm)

.5” (13mm)

The Rusted Baby BadAss CI3620

1.4” (36mm) (FIXED)

2.5 TO 3” (64-76mm) (ADJUSTABLE)

1.5” (38mm)

SHUT IT Gate Hardware

1.2 TO 1.7” (30-43mm) (ADJUSTABLE)

1.3” (33mm) .75” (19mm)

32

1.8” (46mm)

.5” (13mm)


The Stainless BadAss CI3800

.2” (5mm)

2.4 TO 2.9” (61mm-74mm) (ADJUSTABLE)

1.7” 1.5” (43mm) (38mm)

3.8” (97mm)

2.8” (71mm)

1.25” (32mm)

1.5” (38mm)

1.1 TO 1.5” (28mm-38mm) (ADJUSTABLE)

The Aluminum Baby BadAss CI3650

1.4” (36mm) (FIXED)

2.5 TO 3” (64-76mm) (ADJUSTABLE)

1.5” (38mm)

1.2 TO 1.7” (30-43mm) (ADJUSTABLE)

1.3” (33mm) .75” (19mm)

1.8” (46mm)

.5” (13mm)

The Combo Baby BadAss CI3670

1.4” (36mm) (FIXED)

2.5 TO 3” (64-76mm) (ADJUSTABLE)

1.5” (38mm)

www.shutitgatehardware.com

1.2 TO 1.7” (30-43mm) (ADJUSTABLE)

1.3” (33mm) .75” (19mm)

33

1.8” (46mm)

.5” (13mm)

Dimensions

Product Dimensions


Product Dimensions

The Baby Bolt-On BadAss CI3750 .438” (11mm) 2 PL

.438” (11mm) 2 PL

.9” (23mm)

1.6” (41mm) (FIXED)

.9” (23mm)

4” (102mm) 2.25” (57mm)

4” (102mm)

1.8” (46mm) 1.3” (33mm)

2.25” (57mm)

1.4 TO 1.9” (36-48mm) (ADJUSTABLE)

1.5” (38mm)

3 TO 3.5” (76-89mm) (ADJUSTABLE) .25” (6mm)

.75” (19mm)

.75” (19mm) 1.5” (38mm)

.25(6mm)

1.5” (38mm)

The Half Bolt-On BadAss CI3770

.625” (16mm) 2 PL

2.4” (61mm)

3.8” (97mm) 1.7” (43mm)

1.25” (32mm) 2.8” (71mm)

1.5” (38mm)

5.4” 7.5” (137mm) (191mm)

2.4” (61mm)

.25” (6mm) 1.3 TO 1.8” (33-46mm) (ADJUSTABLE)

1.1” (28mm) 2.7 TO 3.1” (69-79mm) (ADJUSTABLE)

1.5” (38mm)

The Bolt-On BadAss CI3700

.625” (16mm) 2 PL

.625” (16mm) 2 PL

2.4” (61mm)

7.5” (191mm)

5.4” (137mm)

1.7” (43mm)

7.5” (191mm)

3.8” (97mm)

2.8” (71mm)

5.4” (137mm)

2.4” (61mm)

1.5” (38mm)

SHUT IT Gate Hardware

.25” (6mm)

2.9 TO 3.4” (74-97mm) (ADJUSTABLE)

34

.25” (6mm)

1.1” (28mm) 1.5” (38mm)


The 4” (102mm) Round Bolt-On BadAss CI2051 .625” (16mm) 2 PL

1.1” (28mm) 4” (102mm)

2.4” (61mm)

1.5” (38mm)

.25” (6mm) 3.75” (95mm)

1” 1.5” (38mm) (25mm)

2.8” (71mm)

2.2” (56mm)

7.5” (191mm)

5.4” (137mm) 2.2” (56mm)

3.8” (97mm)

2.4” (61mm) 3.5” (89mm) (FIXED)

1.1” (28mm)

4.9 TO 5.4” (124-137mm) (ADJUSTABLE)

.25” (6mm)

The 6” (152mm) Round Bolt-On BadAss CI2053

1.6” (41mm)

6.625” (168mm)

.625” (16mm) 2 PL

.4” (10mm)

1.5” (38mm)

5.9” (150mm)

2.4” (61mm)

1.9” (48mm) 1.5” (38mm)

2.8” (71mm)

7.5” (191mm)

1.5” (38mm)

5.4” (137mm) 1.9” (48mm)

2.4” (61mm)

5.75” (146mm)

1.1” (28mm)

.25” (6mm) 5” (127mm) (FIXED) 6.3 TO 6.8” (160-173mm) (ADJUSTABLE)

The Self-Closing BadAss CI3850

.2” (5mm) 2.4 TO 2.9” (61-74mm) ADJUSTABLE 5” (127mm) 2” (51mm)

4.1” (104mm)

3.2” (81mm)

1.5” (38mm)

1.1” TO 1.5” (28-38mm) (ADJUSTABLE)

www.shutitgatehardware.com

35

SPRING TORQUE ADJUSTMENT RING

Dimensions

Product Dimensions


Product Dimensions

The 6” (152mm) BadAss Strap Hinge CI3900

1.85” (47mm)

.4” (10mm)

.4” (10mm)

6.9” (175mm) 6” (152mm)

2” (51mm) .25” (6mm) 6” (152mm) 2” (51mm)

1” (25mm)

6” (152mm) 6.9” (175mm)

The 10” (254mm) BadAss Strap Hinge CI3925

1.85” (47mm)

.4” (10mm)

.4” (10mm)

10.9” (277mm) 10” (254mm)

2” (51mm) .25” (6mm) 5.9” (150mm) 2” (51mm)

1” (25mm)

10” (254mm) 10.9” (277mm)

The BadAss Barrel Hinge CI3950

2.6” (66mm)

1” (25mm)

1.9” (48mm)

2.6” (66mm) 1.9” (48mm)

1” (25mm) 2X .5” (13mm)

.4” (10mm)

1.7” (43mm)

1.7” (43mm)

.4” (10mm)

1.85” (47mm)

2X 1” (25mm)

5.9” (150mm)

.25” (6mm)

2.25” (57mm)

4X .4” (10mm) SLOTS FOR 3/8 BOLTS 2X .5” (13mm)

SHUT IT Gate Hardware

2X 2” (51mm)

36


The 4” (102mm) HardCore Cantilever Wheel Assembly CI2240

1.1” (28mm) .7” (mm18)

90°

1.9” (48mm) ADJUSTMENT RANGE 4” (102mm)

5” (127mm)

1.48” (38mm)

1.9” (48mm) ADJUSTMENT RANGE

2.5” (64mm)

.75” (19mm) 2.1” (53mm) 2.7” (69mm)

1.5” (38mm)

2.9” (74mm)

The 4” (102mm) Steel HardCore Carriage Plates CI2140

6” (152mm) 3” (76mm)

3.2” (81mm)

2.2” (56mm) 4” (102mm)

.12” THICKNESS (3mm)

.6” (15mm)SLOT

The 4” (102mm) Aluminum HardCore Carriage Plates (CI2140A) CI2140A

6” (152mm) 3” (76mm)

3.2” (81mm)

2.2” (56mm) 4” (102mm)

.12” THICKNESS (3mm)

.6” (15mm)SLOT

www.shutitgatehardware.com

37

Dimensions

Product Dimensions


Product Dimensions

The 6” (152mm) HardCore Cantilever Wheel Assembly CI2260

1.1” (28mm) .7” (18mm) 90°

1.9” (48mm) ADJUSTMENT RANGE

6” (152mm)

1.5” (38mm)

5” (127mm)

1.9” (48mm) ADJUSTMENT RANGE

2.5” (64mm)

.75” (19mm) 2.1” (53mm) 2.7” (69mm) 2.9” (74mm)

1.5” (38mm)

The 6” (152mm) Steel HardCore Carriage Plates CI2160

8” (203mm) 4” (102mm)

5.2” (132mm)

3.5” (89mm) 6” (152mm)

.12” THICKNESS (3mm)

.7” (18mm) SLOT

The 6” (152mm) Aluminum HardCore Carriage Plates CI2160A

8” (203mm) 4” (102mm)

5.2” (132mm)

3.5” (89mm) 6” (152mm)

.12” THICKNESS (3mm)

.7” (18mm) SLOT

SHUT IT Gate Hardware

38


Dimensions

Product Dimensions

The HardCore Guide Assembly CI2300 6” (152mm)

1.6” (41mm)

1.4” (36mm) 2 PL

.75” (19mm)

.4” (10mm) 1.6” (41mm)

3.8” 3.5” (89mm) (97mm)

1.5” (38mm)

8” (203mm)

The Extended HardCore Guide Assembly CI2350

8” (203mm)

1.7” (43mm)

.4” (10mm)

.75” (19mm)

3.2” (81mm)

5.4” (137mm) 5.1” (130mm)

1.5” (38mm)

10” (254mm)

The 6” (152mm) HardCore Carriage Cap CI2340

R .95” (24mm)

.12” (3mm)

8” (203mm)

4” (102mm) 3.1” 79mm

2.2” (56mm)

www.shutitgatehardware.com

39


Product Dimensions

The 4” (102mm) HardCore Carriage Cap CI2340 .12” (3mm)

R .95” (24mm) 6” (152mm)

1.9” (48mm) .9” (23mm)

2.2” (56mm)

The 4” (102mm) HardCore V-Groove Wheel with Carriage Plates for 11⁄2” (38mm) Gate Frame 3” (76mm)

CI2515

6” (152mm)

2.7” (69mm) NOMINAL [2.1 TO 3.2” (56-81mm)] (ADJUSTABLE)

1.5” (38mm)

4” (102mm)

4.7” (119mm)NOMINAL [4.2 TO 5.2” (107-132mm)] 1.1” (28mm)

.12” (3mm) 4” (102mm) 2.8” (71mm)

.7” (18mm) 90°

.6” (15mm) .12” (3mm)

The 4” (102mm) HardCore V-Groove Wheel with Carriage Plates for 2” (51mm) Gate Frame 3” (76mm)

CI2520 2.7” (69mm) NOMINAL [2.2 TO 3.2” (56-81mm)] (ADJUSTABLE)

6” (152mm)

2” (51mm)

4” (102mm)

4.7” (119mm) NOMINAL [4.2 TO 5.2” (107-132mm)]

.12” (3mm)

3.3” (84mm)

4” (102mm)

.6”(15mm) .12” (3mm)

SHUT IT Gate Hardware

40

90°

1.1” (28mm) .7” (18mm)


Dimensions

Product Dimensions

The 4” (102mm) HardCore V-Groove Wheel for 2” (51mm) Gate Frame 2” (51mm)

CI2420

.50 HEX NUT (13mm) .50 FLAT WASHERS 2 PL (13mm) 1.5” SPACERS (38mm) 2 PL 3.3” (84mm)

1.1” (28mm) .5” HEX BOLT (13mm)

4” (102mm)

The 4” (102mm) HardCore V-Groove Wheel for 11⁄2” (38mm) Gate Frame CI2415

.7” (18mm) 90°

1.5” (38mm)

.5” HEX NUT (13mm)

.5” FLAT WASHERS 2 PL (13mm) 1.5” SPACERS (38mm) 2 PL 2.8 (71mm) 1.1” (28mm) .5” HEX BOLT (13mm)

4” (102mm)

The 6” (152mm) HardCore V-Groove Wheel for Box Frame CI2625

90°

.7” (18mm)

2.4” (61mm)

.5” HEX NUT (13mm)

.5” FLAT WASHERS 2PL (13mm) 1.5” SPACERS (38mm) 2 PL 3.8” (97mm) 1.1” (28mm)

.5” HEX BOLT (13mm)

www.shutitgatehardware.com

6” (152mm)

41

.7” (18mm) 90°


Product Dimensions

The 6” (152mm) HardCore V-Groove Wheel with Carriage Plates for 11⁄2” (38mm) Gate Frame 4” (102mm)

CI2715

8” (203mm)

4.4” (112mm) NOMINAL [3.5 TO 5.2” (81-132mm)] (ADJUSTABLE)

1.5” (38mm)

6” (152mm)

7.4” (188mm) NOMINAL [6.5 TO 8.2” (165-208mm)] .12” (3mm)

1.1” (28mm) 2.8” (71mm)

.7” (18mm)

6” (152mm)

90°

.6” (15mm)

.12” (3mm)

The 6” (152mm) HardCore V-Groove Wheel with Carriage Plates for 2” (51mm) Gate Frame 4” (102mm)

CI2720 4.4” (112mm) NOMINAL [3.5 TO 5.2” (89-132mm)] (ADJUSTABLE)

8” (203mm)

2” (51mm)

6” (152mm)

7.4” (188mm) NOMINAL [(6.5 TO 8.2” (165-208mm)]

.12 (13mm)

.7” (18mm)

3.3” (84mm)

6” (152mm)

.6” (15mm) .12 (13mm)

SHUT IT Gate Hardware

1.1” (28mm)

42

90°


Dimensions

Product Dimensions

The 6” (152mm) HardCore V-Groove Wheel for 11⁄2” (38mm) Gate Frame CI2615

1.5” (38mm)

.5” HEX NUT (13mm) .5” FLAT WASHERS 2 PL (13mm) 1.5” SPACERS (38mm) 2 PL 2.8” (71mm) 1.1” (28mm)

.5” HEX BOLT (13mm)

90°

The 6” (152mm) HardCore V-Groove Wheel for 2” (51mm) Gate Frame CI2620

.7” (18mm)

6” (152mm)

.5” HEX NUT (13mm)

2” (51mm)

.5” FLAT WASHERS 2 PL (13mm) 1.5” SPACERS (38mm) 2 PL 3.3” (84mm)

.5” HEX BOLT (13mm)

www.shutitgatehardware.com

1.1” (28mm) 6” (152mm)

43

.7” (18mm) 90°


Installation Instructions

ZINC PLATED

5 Years On Bearings

Uphill Hinge Installation Guide

Tack Weld

Gate Open

Driveway

Slope

Step 1: Place gate in closed position. Align hinges to the driveway slope. Be sure hinges are aligned with each other.

Step 2: Tack weld top plate to gate. Tack weld bottom plate to post. Support gate while welding to insure no sagging occurs.

Finish Welding Gate Open

Driveway

Slope

Step 3: Swing open the gate to test alignment. If welds do not hold, hinges are not properly aligned. Repeat from step one.

SHUT IT Gate Hardware

Step 4: If tack welds hold, hinge may be completely welded. Support gate while welding to insure no sagging occurs.

44


Full Cantilever Gate System - 4 Wheel System 6.25” (159mm) 2” (51mm)

3” (76mm)

3

GATE SYSTEM SPECIFICATIONS: 1 FENCE LINE 2 TWO POSTS: 3 x 3 x 3⁄16" (76x76x5mm), 4 x 4 x 3⁄16" (102x102x5mm), OR 6 x 6 x 3⁄16" (152x152x5mm)

2” (51mm)

2A CONNECT TWO POSTS WITH RAIL (CAN BE USED FOR OPERATOR MOUNT)

1

3 4 CANTILEVER WHEEL ASSEMBLIES WELD TO POST

2

4

4 TWO 2 x 2 CANTILEVER RAILS EITHER WELDED OR BOLTED TO GATE FRAME

Fence Height

5 GATE FRAME WITH SUPPORT PANEL POSTS: 3 X 3" (76x76mm), UP TO 12’ (3,658mm) OPENING

2A

4 x 4" (102x102mm), UP TO 22’ OPENING

4 5

6 x 6" (152x152mm), OVER 22’ (6,700mm) OPENING SUPPORT PANEL LENGTH UP TO 12’ (3,658mm) OPENING

12” (305mm)

6

6 FOR CANTILEVER WHEEL ASSEMBLIES, USE CI2240 FOR 4" (102mm) WHEELS AND CI2260 FOR 6" (152mm) WHEELS

2” (51mm)

36” (914mm)

3

12’ (3,658mm) Opening

Fence Line 1

5

3

3 2

www.shutitgatehardware.com

2A

45

2

4

Instructions

Installation Instructions

ZINC PLATED

5 Years On Bearings


Installation Instructions

ZINC PLATED

5 Years On Bearings

Full Cantilever Gate System-Weld/Bolt-On Rail 8” (203mm)

GATE SYSTEM SPECIFICATIONS:

6

1 FENCE LINE

1.5” (38mm)

3” (76mm)

1

2 3 x 3 x 3⁄16" (76x76x5mm) OR 4 x 4 x 3⁄16" (102x102x5mm) POST (1 POST AT FENCE HEIGHT) (1 POST 24" (610mm) ABOVE GRADE) 2A CONNECT TWO POSTS WITH RAIL 6.5” (165mm) UP FROM GRADE (CAN BE USED FOR OPERATOR MOUNT)

7

2

3 CANTILEVER BRACKET WITH 2.5” (64mm) EXTENSIONS (2 TOTAL) 4 CANTILEVER RAIL EITHER WELDED OR BOLTED ON TO GATE FRAME

5

5 GATE FRAME

Fence Height

6 2.5 x 2.5 x 3⁄16" (64x64x5mm) CONTINUOUS ANGLE WELD TO GATE FOR GUIDE

4

7 WELD GUIDE ASSEMBLY CI2300 OR CI2350 (EXTENDED VERSION) TO GUIDE POST

2A

3

8 FOR CANTILEVER WHEEL ASSEMBLIES, USE CI2240 FOR 4" (102mm) WHEELS AND CI2260 FOR 6" (152mm) WHEELS

8 4” (102mm)

6.5” (165mm)

36” (914mm)

Fence Line

12’ (3,658mm) Opening

1

5

4

3 2

SHUT IT Gate Hardware

2

2A

46

7

6

4


Full Cantilever Gate System-Built-In 7” (178mm) 2” (51mm)

1

5

GATE SYSTEM SPECIFICATIONS: 1 FENCE LINE

3” (76mm)

2 3 X 3 X 3⁄16" (76x76x5mm) OR 4 X 4 X 3⁄16" (102x102x5mm) POST (1 POST AT FENCE HEIGHT) (1 POST 24" (610mm) ABOVE GRADE) 2A CONNECT TWO POSTS WITH RAIL 6.5” (165mm) UP FROM GRADE (CAN BE USED FOR OPERATOR MOUNT)

6 2

3 CANTILEVER BRACKET WITH 3” (76mm) EXTENSIONS (2 TOTAL)

4

4 GATE FRAME WITH CANTILEVER RAIL USED AS PART OF FRAME 5 2.5 X 2.5 X 3⁄16" (64x64x5mm) CONTINUOUS ANGLE WELD TO GATE FOR GUIDE 6 COUNSEL GUIDE WELD TO GUIDE POST

2A

7 FOR CANTILEVER WHEEL ASSEMBLIES, USE CI2240 FOR 4" (102mm) WHEELS AND CI2260 FOR 6" (152mm) WHEELS

3

7 4” (102mm)

6.5” (165mm)

36” (914mm)

Fence Line

12’ (3,658mm) Opening 4

1

3

2

www.shutitgatehardware.com

2

2A

47

6

5

Instructions

Installation Instructions

ZINC PLATED

5 Years On Bearings


Installation Instructions

ZINC PLATED

5 Years On Bearings

Quarter cantilever Installation guide Semi Cantilever Installation Guide

1. A CEMENT THRESHOLD WITH ANGLE TRACK AT GATE OPENING 2. B MINIMUM 6" (152mm) LONGER THAN A, LONGER FOR OPERATOR SYSTEMS 3. C CANNOT DEVIATE MORE THAN 1.5" (38mm) VERTICALLY GATE SYSTEM SPECIFICATIONS: GUIDE POST FENCE POST GATE WITH CONTINUOUS 21⁄2 X 21⁄2 X 3⁄16" (64X64X5mm) GUIDE ANGLE GUIDE ASSEMBLY, PART# CI2300 CANTILEVER WHEEL ASSEMBLY: ONE ON REAR OF GATE 4" (102mm) FOR RESIDENTIAL, PART# CI2240 6" (152mm) FOR COMMERCIAL, PART# CI2260 V WHEEL ASSEMBLY: ONE ON FRONT BOTTOM RAIL 4" (102mm) FOR RESIDENTIAL, PART# CI2515, USE 11⁄2 X 3" (38X76mm) BOTTOM RAIL 6" (152mm) FOR COMMERCIAL, PART# CI2720, USE 2 X 4" (51X102mm) BOTTOM RAIL RAIL BRACKET PART# CI2310, FOR USE ON TYPE A RAIL 3⁄8 X 11⁄2" (10X38mm) FLAT

RAIL BRACKET: PART# CI2310 WITH 2 X 2" (51X51mm) 14 GA. STOCK FOR POST 8' (2,438mm) O.C. MAX

⁄8 X 1" (3X25mm) ANGLE SHOP WELD TO 2 X 4" (51X102mm)STOCK TUBE FOR POSTS MORE THAN 8' (2,438mm) O.C.

1

4" (102mm) MIN 31⁄8" (79mm) MIN 8" (203mm) MIN

www.shutitgatehardware.com SHUT IT Gate Hardware

48


Instructions

Installation Instructions WWW.SHUTITGATEHARDWARE.COM ZINC PLATED

5 Years On Bearings

SLIDE GATE INSTALLATION GUIDES

FULL THRESHOLD STYLE

Full Threshold Style

1. FULL CEMENT THRESHOLD: A 12 X 12" (305X305mm) THRU OPENIG B 8 X 8" (203X203mm) BEHIND FENCE, ADJUST LENGTH FOR OPERATORS 2. SLOPE THRU C SHOULD NOT DEVIATE MORE THAN 11⁄2" (38mm) VERTICALLY

GATE SYSTEM SPECIFICATIONS: TWO V-GROOVE WHEELS IN BOTTOM RAIL

A. 4" (102mm) FOR RESIDENTIAL, PART# CI2515, USE 11⁄2 X 3" (38-76mm) BOTTOM RAIL

B. 6" (152mm) FOR COMMERCIAL, PART# CI2720, USE 2 X 4" (51-102mm) BOTTOM RAIL

21⁄2 X 21⁄2 X 3⁄16 (64X64X5mm) CONTINUOUS ANGLE FULL LENGTH OF GATE HEIGHT LOCATION CAN VARY PER GATE DESIGN GUIDE POST: MIN. 3 X 3 X .120" (76X76X3mm)WALL GUIDE ASSEMBLY: PART# CI2300 NOTES: * MOST EFFICIENT SLIDE SYSTEM WEIGHT BALANCED DIRECTLY OVER TOP OF WHEELS ALLOWING MAXIMUM USE OF WHEEL'S EFFICIENCY *GUIDE ASSEMBLY KEEPS GATE IN LINE WITH MINIMUM FRICTION AS SEALED BEARING WHEELS ALLOW CONTINUOUS SMOOTH MOVEMENT *SEVERAL HUNDRED POUND GATES MOVE WITH FINGER TOUCH EASE

8" (203mm) TYP

SHUT IT Gate Hardware PO Box 5464 Tucson, AZ 857o3 Phone: 520-320-0680 Fax: 520-320-0681 Email: sales@shutitgatehardware.com

www.shutitgatehardware.com

49

4" (102mm) TYP


Installation Instructions

ZINC PLATED

5 Years On Bearings

Bottom Rail Cut Out Instructions Guide

Step 1: Cut a “V” notch in your bottom rail using a grinder and 4 1⁄2 x .040 x 7⁄8” (114x1x22mm) cutting wheel (or alternative method)

Step 2: Slide 4” (102mm) or 6” (152mm) HardCORE Wheel with Carriage Plate (CI2500 or CI2700 series) over bottom rail and weld into place. Wheel fits inside bottom rail, resulting in a UL325-compatible installation.

Recommended Bottom Rails: • 2 x 4” (51x102mm) Bottom rail recommended for use with the 6” (152mm) of HardCORE Wheel with Carriage Plates for 2” (51mm) Gate Frame (CI2720) • 11⁄2 x 3” (38x76mm) Bottom rail recommended for use with the 4” (102mm) of HardCORE Wheel with Carriage Plates for 11⁄2” (38mm) Gate Frame (CI2515)

Chain Link Slide Gate Wheel Installation Guide

Step 1: Align and tack weld our SHUT IT HardCORE Carriage Cap (CI2340 or CI2360) on top of your bottom rail.

Step 2: After HardCORE Carriage Cap is in place, cut rail off INSIDE of the carriage cap and then complete a full weld on both ends of the carriage cap.

SHUT IT Gate Hardware

50

Step 3: Slide either the 4” (102mm)or 6” (152mm)of HardCORE Wheel with Carriage Plates for 2” (51mm) Gate Frame (CI2520 or CI2720) into the HardCORE Carriage Cap and weld into position.


Welding Tips Proper Welding

Warning: Hinges will be severely damaged if electrical welding current is not properly grounded and will result in the warranty being void. Damage can be caused by excessive heat or by welding current passing through the bearings. Ensure that the welding ground is always on the side being welded. Current must not pass through the bearings or sever damage will result. To prevent heat related damage to the bearings, the welding process must be done in several small segments. Weld one surface at a time and alternate between top and bottom hinge. After each small segment is welded, the hinge should be allowed to cool before welding the next segment. Use general field welding operations with suitable heat transfer controls. Protect hinge from weld spatter. Clean up and finish with appropriate corrosion and rust protection.

Notes

www.shutitgatehardware.com

51

Instructions

ZINC PLATED

5 Years On Bearings


NORTH & SOUTH AMERICA:

4500 East Speedway Blvd Suite 48 Tucson, AZ 85712 Tel: (520) 320-0680 Fax: (520) 320-0681 E-mail: sales@shutitgatehardware.com

AUSTRALIA:

D&D Technologies P/L, Unit 6, 4–6 Aquatic Drive, Frenchs Forest NSW 2086 Tel: 1800 500 203 or (02) 9454 7888 Fax: (02) 9454 7688. E-mail: sales@ddtech.com.au

EUROPE:

D&D Technologies B.V., Vondellaan Niasstraat 1 3531 WR Utrecht, The Netherlands Tel: +31 (0)30 291 98 47 Fax: +31 (0)30 291 99 98 E-mail: sales@ddtech.nl

UK:

D&D Technologies, Charlwoods Road, East Grinstead, West Sussex RH19 2HR Tel: +44 (0) 1342 327280 Fax: +44 (0) 1342 327115 Email: enquiries@ddtechglobal.co.uk

BRILLIANT DESIGNS. BADASS PRODUCTS. E P I C R E S U LT S .

Follow us:

Find us:

Available From

Copyright © Shut It a D&D Technologies Company 2016 PROMO158 MKT-068-16

Shut It Product Catalog Volume 11 English Version  

Shut It Gate Hardware started as Counsel Industries, LLC and became an early leader in the design and distribution of hardware and gate syst...

Read more
Read more
Similar to
Popular now
Just for you