Page 1

Corporate Headquarters 651-450-5000 125 HARDMAN AVENUE SOUTH, SOUTH SAINT PAUL, MINNESOTA 55075-2456

www.waterousco.com F-2606 (1/08)

Waterous_VehicleMounted_Brochure2 1

2/13/08 11:47:55 AM


Responding to a fire is no time to discover that you have an unreliable piece of equipment. That’s why more firehouses around the world depend on Waterous fire pumps than any other option. With thousands in use, Waterous fire pumps are proven to be rugged, reliable and revolutionary in design. Every Waterous fire pump comes with an industry exclusive 5-year warranty along with the features, accessories and power fire departments need to suppress the most dangerous fires. Never be caught with anything less than the best. Specify the most trusted fire pump – Waterous.

Waterous_VehicleMounted_Brochure2 2

2/13/08 11:48:00 AM


Responding to a fire is no time to discover that you have an unreliable piece of equipment. That’s why more firehouses around the world depend on Waterous fire pumps than any other option. With thousands in use, Waterous fire pumps are proven to be rugged, reliable and revolutionary in design. Every Waterous fire pump comes with an industry exclusive 5-year warranty along with the features, accessories and power fire departments need to suppress the most dangerous fires. Never be caught with anything less than the best. Specify the most trusted fire pump – Waterous.

Waterous_VehicleMounted_Brochure2 2

2/13/08 11:48:00 AM


Never compromise with fire. Insist on a Waterous midship fire pump. Waterous never cuts corners when it comes to design, engineering and manufacturing. The Waterous commitment to quality is evident in our industry leading components. The proof is the performance.

High-strength aluminum housing transmission is

100- to

200- lbs

lighter

than

comparative

transmissions, allowing you to put more tools on your apparatus. Additionally, aluminum construction dissipates heat faster for safer operation and prolonged performance.

With a chain drive, less energy is lost, enabling the pump to benefit from every ounce of power. A chain drive also lasts longer and creates less noise.

The

innovative

performance

impeller while

enhances

using

less

horsepower. Additionally, a tungsten

The intelligent separable shaft design makes it possible

carbide-plated hub creates a harder surface that lasts 4-to-5 times longer than typical impellers.

Whether you’re transferring to pressure or volume, this ball transfer valve will not

to use spring-loaded mechanical shaft seals that have no leakage and require no routine maintenance.

stick. The maintenance-free design incorporates a ball with a spring-loaded floating seal assembly so it can even accommodate sand without binding.

Waterous_VehicleMounted_Brochure2 3

2/13/08 11:48:06 AM


Never compromise with fire. Insist on a Waterous midship fire pump. Waterous never cuts corners when it comes to design, engineering and manufacturing. The Waterous commitment to quality is evident in our industry leading components. The proof is the performance.

High-strength aluminum housing transmission is

100- to

200- lbs

lighter

than

comparative

transmissions, allowing you to put more tools on your apparatus. Additionally, aluminum construction dissipates heat faster for safer operation and prolonged performance.

With a chain drive, less energy is lost, enabling the pump to benefit from every ounce of power. A chain drive also lasts longer and creates less noise.

The

innovative

performance

impeller while

enhances

using

less

horsepower. Additionally, a tungsten

The intelligent separable shaft design makes it possible

carbide-plated hub creates a harder surface that lasts 4-to-5 times longer than typical impellers.

Whether you’re transferring to pressure or volume, this ball transfer valve will not

to use spring-loaded mechanical shaft seals that have no leakage and require no routine maintenance.

stick. The maintenance-free design incorporates a ball with a spring-loaded floating seal assembly so it can even accommodate sand without binding.

Waterous_VehicleMounted_Brochure2 3

2/13/08 11:48:06 AM


The low profile midship two-stage series / parallel pump with ball-type transfer valve allows you to switch from pressure to volume smoothly and easily. CM FLOW SPECS: • 500, 750, 1000 and 1250 GPM @ 150 psi • 1900, 2850, 3800 and 4750 l/min @ 10.3 bar CMU FLOW SPECS: • 1500, 1750, 2000 and 2250 GPM @ 150 psi • 5700, 6625, 7750 and 8550 l/min @ 10.3 bar • Flame-plated impellers (standard on CMU, optional on CM)

Waterous midship pumps provide fire industry

and exclusive design features, Waterous widship

• Two-piece, horizontally-split, high-tensile strength cast iron pump casing

professionals with easy-to-operate systems that

pumps have become the primary firefighting tools

• Optional bronze pump casing

offer the most efficient water delivery system

of fire departments around the globe.

on the market. Admired for their craftsmanship

• All deep-groove oil and grease lubricated ball bearings located outside the pump casing • Bronze double-hubbed accurately balanced impellers • Stainless steel separable impeller shaft • Replaceable bronze impeller rings • Flinger rings mounted on impeller shaft

Our single stage CS/CSU pumps are reliable

• Adjustable BFG packing standard (spring-loaded mechanical seal available)

workhorses that feature simple operation coupled with easy maintenance. CS FLOW SPECS: • 750, 1000 and 1250 GPM @ 150 psi • 2850, 3800 and 4750 l/min @ 10.3 bar CSU FLOW SPECS: • 1500, 1750, 2000 and 2250 GPM @ 150 psi • 5700, 6625, 7570 and 8550 l/min @ 10.3 bar • Flame-plated impellers (standard on CSU, optional on CS) • Two-piece, horizontally-split, high-tensile strength cast iron pump casing • Optional bronze pump casing

Versatile and adaptable, the CX can be mounted midship or in front of the engine if needed. The CX can even be used as a PTO pump or direct-engine mounted. It’s an ideal solution for specialty applications or tight spaces. CX FLOW SPECS: • 750 to 1250 GPM @ 150 psi • 2850 to 4750 l/min @ 10.3 bar

• All deep-groove oil and grease lubricated ball bearings located outside the pump casing

• Pressures to 350 psi (24.1 bar)

• Bronze double-hubbed accurately balanced impeller

• End suction/vertically-split volute

• Stainless steel separable impeller shaft

• Self-adjusting mechanical seal

• Replaceable bronze impeller rings

• Mechanically and hydraulically balanced impeller

• Flinger rings mounted on impeller shaft

• Replaceable bronze impeller rings

• Adjustable BFG packing standard (spring-loaded mechanical seal available)

• Optional flame-plated impeller

Waterous_VehicleMounted_Brochure2 4

2/13/08 11:48:11 AM


The low profile midship two-stage series / parallel pump with ball-type transfer valve allows you to switch from pressure to volume smoothly and easily. CM FLOW SPECS: • 500, 750, 1000 and 1250 GPM @ 150 psi • 1900, 2850, 3800 and 4750 l/min @ 10.3 bar CMU FLOW SPECS: • 1500, 1750, 2000 and 2250 GPM @ 150 psi • 5700, 6625, 7750 and 8550 l/min @ 10.3 bar • Flame-plated impellers (standard on CMU, optional on CM)

Waterous midship pumps provide fire industry

and exclusive design features, Waterous widship

• Two-piece, horizontally-split, high-tensile strength cast iron pump casing

professionals with easy-to-operate systems that

pumps have become the primary firefighting tools

• Optional bronze pump casing

offer the most efficient water delivery system

of fire departments around the globe.

on the market. Admired for their craftsmanship

• All deep-groove oil and grease lubricated ball bearings located outside the pump casing • Bronze double-hubbed accurately balanced impellers • Stainless steel separable impeller shaft • Replaceable bronze impeller rings • Flinger rings mounted on impeller shaft

Our single stage CS/CSU pumps are reliable

• Adjustable BFG packing standard (spring-loaded mechanical seal available)

workhorses that feature simple operation coupled with easy maintenance. CS FLOW SPECS: • 750, 1000 and 1250 GPM @ 150 psi • 2850, 3800 and 4750 l/min @ 10.3 bar CSU FLOW SPECS: • 1500, 1750, 2000 and 2250 GPM @ 150 psi • 5700, 6625, 7570 and 8550 l/min @ 10.3 bar • Flame-plated impellers (standard on CSU, optional on CS) • Two-piece, horizontally-split, high-tensile strength cast iron pump casing • Optional bronze pump casing

Versatile and adaptable, the CX can be mounted midship or in front of the engine if needed. The CX can even be used as a PTO pump or direct-engine mounted. It’s an ideal solution for specialty applications or tight spaces. CX FLOW SPECS: • 750 to 1250 GPM @ 150 psi • 2850 to 4750 l/min @ 10.3 bar

• All deep-groove oil and grease lubricated ball bearings located outside the pump casing

• Pressures to 350 psi (24.1 bar)

• Bronze double-hubbed accurately balanced impeller

• End suction/vertically-split volute

• Stainless steel separable impeller shaft

• Self-adjusting mechanical seal

• Replaceable bronze impeller rings

• Mechanically and hydraulically balanced impeller

• Flinger rings mounted on impeller shaft

• Replaceable bronze impeller rings

• Adjustable BFG packing standard (spring-loaded mechanical seal available)

• Optional flame-plated impeller

Waterous_VehicleMounted_Brochure2 4

2/13/08 11:48:11 AM


Get the power and performance of a traditional midship fire pump in a compact, lightweight design. Made of ductile iron, the S100C10 and S100D are nearly 35% lighter, and yet 25% stronger than identical pumps made with gray iron. Available as a direct-engine mount or matched with a Waterous C10 aluminum case transmission. S100C10 FLOW SPECS: • Up to 2000 GPM @ 150 psi • Up to 7600 l/min @ 10.3 bar S100D FLOW SPECS: • Up to 2000 GPM @ 150 psi

S100C10

• Up to 7600 l/min @ 10.3 bar

Provide true "pump and roll" capability while

Available in multiple sizes and styles, Waterous

reducing transmission wear on your apparatus by

has a PTO fire pump to fit your requirements and

adding a PTO fire pump to your firefighting arsenal.

apparatus set-up perfectly.

• Cast ductile iron body • Dual stripping edge volute • Passive lubrication system

FLOW SPECS:

• Self-adjusting mechanical seal

• 300 GPM (1135 l/min) @ 150 psi (10 bar) Maximum Flow

• Mechanically and hydraulically balanced impeller

• 60 GPM (227 l/min) @ 400 psi (28 bar) Maximum Pressure

• Replaceable bronze wear rings

• Optional bronze pump casing

• All deep-groove anti-friction ball bearings, oil-splash lubricated • 5-inch ANSI flange or optional end flanged discharge manifold • 5-year warranty

• Multiple gearbox mounts (horizontally, vertically, or inverted)

S100D

• Ten optional speed-increasing transmission ratios • Crown-shaved, carburized and hardened helical cut, constant-mesh quiet gears • 17-4 stainless steel, heat-treated impeller shaft (monel shaft optional)

A simple to operate, efficient to run and easy

Driven by a transmission side mounted PTO, the CPK2 can also be powered by optional direct-engine mount. Able to accommodate multiple lines for straight stream or fog nozzles.

• Bronze double-hubbed precision-balanced impeller • 3-inch NPT or BSP intake; 2-inch NPT or BSP discharge (BSP threads available straight or tapered)

• 5-year warranty

to depend on single stage pump that’s perfect for applications that require a little less power. FLOW SPECS:

CGVGPA FLOW SPECS: • 750 GPM @ 150 psi for NFPA 1901

• 500 GPM (1900 l/min) @ 150 PSI (10 bar) Maximum Flow

• 2850 l/min @ 10.3 bar

• 60 GPM (227 l/min) @ 800 psi (55 bar) Maximum Pressure • High tensile, one-piece, close-grained gray iron casing (bronze optional)

• 500, 600 and 700 GPM for NFPA 1902

• Bronze double-hubbed, precision-balanced impellers.

• 1900, 2250 and 2650 l/min

• Separable impeller shaft for ease of serviceability.

• All deep-groove oil and grease lubricated ball bearings located outside the pump casing

• Push-pull manual bronze transfer valve (in bronze housing)

• Bronze double-hubbed accurately balanced impeller

• Available in either rotation of input shaft

• Stainless steel shaft

• 4-inch NPT tee adapter intake; two 2 inch or 2.5 inch NPT tee adapter

• Replaceable bronze wear rings • Bronze-fitted, high-tensile strength cast iron pump casing • Optional bronze pump casing • Self-adjusting mechanical seal

A compact two-stage pump with “pump and roll” capability making it ideal for extinguishing grass and brush fires.

(or 2.5 inch tapped flange) discharge • PTO or direct engine bell housing mount • Ten optional speed-increasing transmission ratios • 5-year warranty

• Flinger rings mounted on impeller shaft • 5-year warranty

Waterous_VehicleMounted_Brochure2 5

2/13/08 11:48:17 AM


Get the power and performance of a traditional midship fire pump in a compact, lightweight design. Made of ductile iron, the S100C10 and S100D are nearly 35% lighter, and yet 25% stronger than identical pumps made with gray iron. Available as a direct-engine mount or matched with a Waterous C10 aluminum case transmission. S100C10 FLOW SPECS: • Up to 2000 GPM @ 150 psi • Up to 7600 l/min @ 10.3 bar S100D FLOW SPECS: • Up to 2000 GPM @ 150 psi

S100C10

• Up to 7600 l/min @ 10.3 bar

Provide true "pump and roll" capability while

Available in multiple sizes and styles, Waterous

reducing transmission wear on your apparatus by

has a PTO fire pump to fit your requirements and

adding a PTO fire pump to your firefighting arsenal.

apparatus set-up perfectly.

• Cast ductile iron body • Dual stripping edge volute • Passive lubrication system

FLOW SPECS:

• Self-adjusting mechanical seal

• 300 GPM (1135 l/min) @ 150 psi (10 bar) Maximum Flow

• Mechanically and hydraulically balanced impeller

• 60 GPM (227 l/min) @ 400 psi (28 bar) Maximum Pressure

• Replaceable bronze wear rings

• Optional bronze pump casing

• All deep-groove anti-friction ball bearings, oil-splash lubricated • 5-inch ANSI flange or optional end flanged discharge manifold • 5-year warranty

• Multiple gearbox mounts (horizontally, vertically, or inverted)

S100D

• Ten optional speed-increasing transmission ratios • Crown-shaved, carburized and hardened helical cut, constant-mesh quiet gears • 17-4 stainless steel, heat-treated impeller shaft (monel shaft optional)

A simple to operate, efficient to run and easy

Driven by a transmission side mounted PTO, the CPK2 can also be powered by optional direct-engine mount. Able to accommodate multiple lines for straight stream or fog nozzles.

• Bronze double-hubbed precision-balanced impeller • 3-inch NPT or BSP intake; 2-inch NPT or BSP discharge (BSP threads available straight or tapered)

• 5-year warranty

to depend on single stage pump that’s perfect for applications that require a little less power. FLOW SPECS:

CGVGPA FLOW SPECS: • 750 GPM @ 150 psi for NFPA 1901

• 500 GPM (1900 l/min) @ 150 PSI (10 bar) Maximum Flow

• 2850 l/min @ 10.3 bar

• 60 GPM (227 l/min) @ 800 psi (55 bar) Maximum Pressure • High tensile, one-piece, close-grained gray iron casing (bronze optional)

• 500, 600 and 700 GPM for NFPA 1902

• Bronze double-hubbed, precision-balanced impellers.

• 1900, 2250 and 2650 l/min

• Separable impeller shaft for ease of serviceability.

• All deep-groove oil and grease lubricated ball bearings located outside the pump casing

• Push-pull manual bronze transfer valve (in bronze housing)

• Bronze double-hubbed accurately balanced impeller

• Available in either rotation of input shaft

• Stainless steel shaft

• 4-inch NPT tee adapter intake; two 2 inch or 2.5 inch NPT tee adapter

• Replaceable bronze wear rings • Bronze-fitted, high-tensile strength cast iron pump casing • Optional bronze pump casing • Self-adjusting mechanical seal

A compact two-stage pump with “pump and roll” capability making it ideal for extinguishing grass and brush fires.

(or 2.5 inch tapped flange) discharge • PTO or direct engine bell housing mount • Ten optional speed-increasing transmission ratios • 5-year warranty

• Flinger rings mounted on impeller shaft • 5-year warranty

Waterous_VehicleMounted_Brochure2 5

2/13/08 11:48:17 AM


FLOW SPECS: • 60 GPM (227 l/m) at 1000 PSI (69 Bar) • Two-piece, horizontally-split, high-tensile, close-grained, gray iron casings (bronze optional) • Ni-resist; special “stepped” designed wear rings reduce internal leakage & increase efficiency An ultra high-pressure, lightweight, 4-stage centrifugal pump. Able to produce high-pressure fog while the pumper is in motion or stationary.

• Bronze, hydraulically and mechanically balanced impellers • Impeller hubs are “stepped” to minimize internal bypass • Adjustable braided flexible graphite (BFG) packing • Available with either clockwise or counter-clockwise rotation of input shaft

FLOW SPECS: • 500 GPM (1900 l/min) to 750 GPM (2850 l/min) @ 150 PSI (10 bar) • Special rating of 1000 GPM (3800 l/min) or 350 PSI (24 bar) • High-tensile, close-grained gray iron (bronze optional) transmission casing • Constant mesh, helical gears made of alloy steel • 17-4 stainless steel, heat-treated impeller shaft • Fully-enclosed, bronze, double-hubbed impeller with flame-plated hubs • Victaulic®, threaded or flanged intake connections The single stage design with vertically-split volute and pump transmission provides simple operation, easy maintanence and high reserve capacity.

• Face-type, self-adjusting corrosion- and wear-resistant mechanical seals.

Specifically designed for international-style fire

and feature built-in high-pressure relief valves for

vehicles, the compact, rear-mounted HL series

enhanced safety. Both the HL200 and HL300 models

pumps deliver high and low pressure simultaneously

are backed by an industry exclusive 5-year warranty.

• 5-year warranty

HL200 FLOW SPECS: FLOW SPECS: • 750 GPM (2850 l/min) to 1250 GPM (4750 l/min) • 150 PSI (10 bar) • High-tensile, close-grained iron (bronze optional), two-piece, vertically-split volute body

A single-stage end-suction pump for ARFF trucks and fire boats. Midship mounted and driven by a PTO drive, the CXK can also be front-mounted or direct-driven.

• Low Pressure Spec: 2000 l/min @10 bar (3-meter lift) • High Pressure Spec: 400 l/min @ 40 bar • Available in mid-mount configuration • Optional round-the-pump foam system • Optional operator’s panel

• Constant mesh, helical gears made of alloy steel

• Optional Storz fittings

• 17-4 stainless steel, heat-treated impeller shaft

• Bronze (gunmetal) construction available

• Fully-enclosed, bronze, double-hubbed, precision-balanced impeller

• 5-year warranty

• Bronze replaceable wear rings • Face-type, self-adjusting corrosion- and wear-resistant mechanical seals. • 5-year warranty

FLOW SPECS: • 500 GPM (1900 l/min) @ 150 PSI (10 bar) • 350 PSI (24) bar Maximum Pressure

One-piece design featuring intake and discharge arrangements in a wide variety of options to meet your requirements.

HL300 FLOW SPECS: • Low Pressure Spec: 3000 l/min @10 bar (3-meter lift) • High Pressure Spec: 400 l/min @ 40 bar

• High-tensile, one-piece, gray iron casing

• Available in mid-mount configuration

• Multiple transmission mounting options (front-housing, bell housing direct or PTO)

• Optional round-the-pump foam system

• Choice of 4-inch NH or BSP threaded-end intake

• Optional operator’s panel

• Bronze, double-hubbed, precision-balanced impeller

• Optional Storz fittings

• 17-4 stainless steel, heat-treated impeller shaft

• Bronze (gunmetal) construction available

• Maintenance-free, self-adjusting shaft seal

• 5-year warranty

• Hardened, helical cut, constant-mesh gears • 5-year warranty

Waterous_VehicleMounted_Brochure2 6

2/13/08 11:48:23 AM


FLOW SPECS: • 60 GPM (227 l/m) at 1000 PSI (69 Bar) • Two-piece, horizontally-split, high-tensile, close-grained, gray iron casings (bronze optional) • Ni-resist; special “stepped” designed wear rings reduce internal leakage & increase efficiency An ultra high-pressure, lightweight, 4-stage centrifugal pump. Able to produce high-pressure fog while the pumper is in motion or stationary.

• Bronze, hydraulically and mechanically balanced impellers • Impeller hubs are “stepped” to minimize internal bypass • Adjustable braided flexible graphite (BFG) packing • Available with either clockwise or counter-clockwise rotation of input shaft

FLOW SPECS: • 500 GPM (1900 l/min) to 750 GPM (2850 l/min) @ 150 PSI (10 bar) • Special rating of 1000 GPM (3800 l/min) or 350 PSI (24 bar) • High-tensile, close-grained gray iron (bronze optional) transmission casing • Constant mesh, helical gears made of alloy steel • 17-4 stainless steel, heat-treated impeller shaft • Fully-enclosed, bronze, double-hubbed impeller with flame-plated hubs • Victaulic®, threaded or flanged intake connections The single stage design with vertically-split volute and pump transmission provides simple operation, easy maintanence and high reserve capacity.

• Face-type, self-adjusting corrosion- and wear-resistant mechanical seals.

Specifically designed for international-style fire

and feature built-in high-pressure relief valves for

vehicles, the compact, rear-mounted HL series

enhanced safety. Both the HL200 and HL300 models

pumps deliver high and low pressure simultaneously

are backed by an industry exclusive 5-year warranty.

• 5-year warranty

HL200 FLOW SPECS: FLOW SPECS: • 750 GPM (2850 l/min) to 1250 GPM (4750 l/min) • 150 PSI (10 bar) • High-tensile, close-grained iron (bronze optional), two-piece, vertically-split volute body

A single-stage end-suction pump for ARFF trucks and fire boats. Midship mounted and driven by a PTO drive, the CXK can also be front-mounted or direct-driven.

• Low Pressure Spec: 2000 l/min @10 bar (3-meter lift) • High Pressure Spec: 400 l/min @ 40 bar • Available in mid-mount configuration • Optional round-the-pump foam system • Optional operator’s panel

• Constant mesh, helical gears made of alloy steel

• Optional Storz fittings

• 17-4 stainless steel, heat-treated impeller shaft

• Bronze (gunmetal) construction available

• Fully-enclosed, bronze, double-hubbed, precision-balanced impeller

• 5-year warranty

• Bronze replaceable wear rings • Face-type, self-adjusting corrosion- and wear-resistant mechanical seals. • 5-year warranty

FLOW SPECS: • 500 GPM (1900 l/min) @ 150 PSI (10 bar) • 350 PSI (24) bar Maximum Pressure

One-piece design featuring intake and discharge arrangements in a wide variety of options to meet your requirements.

HL300 FLOW SPECS: • Low Pressure Spec: 3000 l/min @10 bar (3-meter lift) • High Pressure Spec: 400 l/min @ 40 bar

• High-tensile, one-piece, gray iron casing

• Available in mid-mount configuration

• Multiple transmission mounting options (front-housing, bell housing direct or PTO)

• Optional round-the-pump foam system

• Choice of 4-inch NH or BSP threaded-end intake

• Optional operator’s panel

• Bronze, double-hubbed, precision-balanced impeller

• Optional Storz fittings

• 17-4 stainless steel, heat-treated impeller shaft

• Bronze (gunmetal) construction available

• Maintenance-free, self-adjusting shaft seal

• 5-year warranty

• Hardened, helical cut, constant-mesh gears • 5-year warranty

Waterous_VehicleMounted_Brochure2 6

2/13/08 11:48:23 AM


• Chromium-plated bronze valve ball • Spring-loaded floating seal assembly • Multi-purpose drainport • Manual, push-pull, twist lock (2.5”) mechanism with panel-mounted “T” handle lock • Optional electric actuator complies with NFPA requirements for slow actuation

Waterous vehicle-mounted fire pumps give you the power you need. Now equip them to fit

your specific operation by selecting the perfect accompanying accessories. • Opens when water inside the pump reaches 140º F (60º C) • Flashing warning light on pump panel is triggered when water reaches 180º F (82º C) • Complete aspirated foam system

• Water is released to ground

• 4-sensor technology • 2-year warranty and fully-integrated service • Stainless steel foam manifold • Full-flow brass body check valve • 16-bit mixed signal microcontroller • Onsite and online laptop diagnostics • Available 3 GPM (11.3 l/min) or 6 GPM (22.6 l/min) @ 150 PSI (10 bar) foam output • Maximum Operating Pressure: 450 PSI (32 bar)

• VPO Oil-Free Primer • Fast, dependable priming • Electrically driven • Operates independently from the pump • Lubrication option (requires priming tank)

• Complete aspirated foam system • 1-year warranty and service

• Vacuum Activated Priming (VAP) Valve

• Stainless steel paddlewheel flow meter

• Stainless steel valve stem

• 16-bit mixed signal microcontroller

• Opens automatically during pump priming

• Blue LED illuminated operator panel (standard on 2.5 models)

• Closes automatically when primer is deactivated

• Onsite and online laptop diagnostics • Available 1.5 GPM (5.68 l/min) or 2.5 GPM (9.46 l/min) @ 150 psi (10 bar) foam output • Maximum Operating Pressure: 450 PSI (32 bar)

Waterous_VehicleMounted_Brochure2 7

2/13/08 11:48:28 AM


• Chromium-plated bronze valve ball • Spring-loaded floating seal assembly • Multi-purpose drainport • Manual, push-pull, twist lock (2.5”) mechanism with panel-mounted “T” handle lock • Optional electric actuator complies with NFPA requirements for slow actuation

Waterous vehicle-mounted fire pumps give you the power you need. Now equip them to fit

your specific operation by selecting the perfect accompanying accessories. • Opens when water inside the pump reaches 140º F (60º C) • Flashing warning light on pump panel is triggered when water reaches 180º F (82º C) • Complete aspirated foam system

• Water is released to ground

• 4-sensor technology • 2-year warranty and fully-integrated service • Stainless steel foam manifold • Full-flow brass body check valve • 16-bit mixed signal microcontroller • Onsite and online laptop diagnostics • Available 3 GPM (11.3 l/min) or 6 GPM (22.6 l/min) @ 150 PSI (10 bar) foam output • Maximum Operating Pressure: 450 PSI (32 bar)

• VPO Oil-Free Primer • Fast, dependable priming • Electrically driven • Operates independently from the pump • Lubrication option (requires priming tank)

• Complete aspirated foam system • 1-year warranty and service

• Vacuum Activated Priming (VAP) Valve

• Stainless steel paddlewheel flow meter

• Stainless steel valve stem

• 16-bit mixed signal microcontroller

• Opens automatically during pump priming

• Blue LED illuminated operator panel (standard on 2.5 models)

• Closes automatically when primer is deactivated

• Onsite and online laptop diagnostics • Available 1.5 GPM (5.68 l/min) or 2.5 GPM (9.46 l/min) @ 150 psi (10 bar) foam output • Maximum Operating Pressure: 450 PSI (32 bar)

Waterous_VehicleMounted_Brochure2 7

2/13/08 11:48:28 AM


• Controls discharge pressure by bypassing flow from discharge back to suction • Control discharge pressure up to 300 psi (20 bar) • Available in three sizes, up to 2250 GPM (8500 l/min)

• Manual, electric or Pneumatic operation • Stainless steel Wafer-Sphere® element • Polymeric flexible lip seal

Waterous has you covered with Total Integration – a

implementation. Total Integration guarantees the right

• Provision for pre-butterfly relief valve

comprehensive program that ensures fire departments

equipment, proper installation, thorough education

have everything needed from specification to

and lifetime support with zero exceptions.

• Pilot-operated for improved performance • Pressure scale markings • Panel-mounted strainer

EVALUATE

ORIENTATE

Waterous assesses existing equipment,

Waterous provides thorough equipment

short and long terms needs, fire scenarios

orientation

and other factors to create an accurate, up

get the best performance with the safest

to date evaluation of the situation.

operation. Waterous also offers the only

ensuring

fire

departments

CAFS instructors in the industry.

PROPOSE Waterous studies the data and objectives

SUPPORT

to create a fire suppression equipment

Waterous

backs

specification program that meets the needs

industry

leading

and respects the budget.

5-year coverage on all vehicle-pumps, a

equipment

warranties,

with

including

2-year coverage of Advantus™ and a 1-year

• Spring-loaded locking control • Dual-action cylinder

its

IMPLEMENT

coverage on Aquis™, along with lifetime

Waterous takes proactive measures to

call support on all products.

provide the best possible circumstances for proper equipment installation/retrofitting for optimum performance and longevity.

Waterous_VehicleMounted_Brochure2 8

2/13/08 11:48:33 AM


• Controls discharge pressure by bypassing flow from discharge back to suction • Control discharge pressure up to 300 psi (20 bar) • Available in three sizes, up to 2250 GPM (8500 l/min)

• Manual, electric or Pneumatic operation • Stainless steel Wafer-Sphere® element • Polymeric flexible lip seal

Waterous has you covered with Total Integration – a

implementation. Total Integration guarantees the right

• Provision for pre-butterfly relief valve

comprehensive program that ensures fire departments

equipment, proper installation, thorough education

have everything needed from specification to

and lifetime support with zero exceptions.

• Pilot-operated for improved performance • Pressure scale markings • Panel-mounted strainer

EVALUATE

ORIENTATE

Waterous assesses existing equipment,

Waterous provides thorough equipment

short and long terms needs, fire scenarios

orientation

and other factors to create an accurate, up

get the best performance with the safest

to date evaluation of the situation.

operation. Waterous also offers the only

ensuring

fire

departments

CAFS instructors in the industry.

PROPOSE Waterous studies the data and objectives

SUPPORT

to create a fire suppression equipment

Waterous

backs

specification program that meets the needs

industry

leading

and respects the budget.

5-year coverage on all vehicle-pumps, a

equipment

warranties,

with

including

2-year coverage of Advantus™ and a 1-year

• Spring-loaded locking control • Dual-action cylinder

its

IMPLEMENT

coverage on Aquis™, along with lifetime

Waterous takes proactive measures to

call support on all products.

provide the best possible circumstances for proper equipment installation/retrofitting for optimum performance and longevity.

Waterous_VehicleMounted_Brochure2 8

2/13/08 11:48:33 AM


Corporate Headquarters 651-450-5000 125 HARDMAN AVENUE SOUTH, SOUTH SAINT PAUL, MINNESOTA 55075-2456

www.waterousco.com F-2606 (1/08)

Waterous_VehicleMounted_Brochure2 1

2/13/08 11:47:55 AM

Waterous Vehicle Mounted Pump Brochure  

Brochure for Vehicle Mounted Pumps

Read more
Read more
Similar to
Popular now
Just for you