Issuu on Google+

Flow Product


Stainless Steel

ATEX Rated

Other Gas

Dirty Water

Clean Water

2 

t. +44 (0)1722 439880

e. sales@icenta.co.uk

Plastic

Portable

Fixed

Steam

Air

Magflow Meter Signet 2551    GEORGE FISCHER Magflow Meter Signet 2552     GEORGE FISCHER Magnetic Flow Sensor Magflux A    MECON Magnetic Flow Sensor Magflux S    MECON Magnetic Flow Sensor Magflux F5    MECON Siemens TRANSMAG 2 with Sitrans F M 911E Magnetic flow sensor    SIEMENS Magnetic flow meter Siemens Sitrans F N Mag 3100     SIEMENS Magnetic Flow Meter Siemens Sitrans F N MAG 5100 W     SIEMENS Magnetic Flow Meter Siemens Sitrans F N MAG 1100 / F M MAG 1100 F     SIEMENS Magnetic Flow Meter Siemens Sitrans F N MAG 8000    SIEMENS Paddle Wheel Flow Sensor Signet 2536 Rotor X     GEORGE FISCHER Paddle Wheel Flow Sensors Signet 2537 Rotor X     GEORGE FISCHER Metri IC-IPM Insertion Paddlewheel Flow Meter  METRI Metri IC LPM Paddle Wheel Flow Meters       METRI Metri IC-LTM Turbine Flow Meters       METRI Metri Turbine Flow Meter IC GTM       METRI OVAL Hybrid Multirange DELTA Flow Meters   OVAL Vortex Flow meter OVAL Smart EX Delta        OVAL Insertion Vortex Flow Meter Pro V M23       OVAL Pro V M22 EM Vortex Heat meter VARIOUS OVAL Eggs DELTA Pulse       OVAL Flowpet 5G    OVAL Geared Flow Meter ECO OVAL     OVAL Flow Meter OVAL Flowmate    OVAL Geared Flow meter OVAL Flowpet NX    OVAL Spiral Geared Flow Meter ULTRA OVAL     OVAL KRAL Helical Screw Flow Meter OME Series     KRAL Fuel Oil Meter OVAL Keromate RN    OVAL PD Flow Meter OVAL ULTRA UFII    OVAL Coriolis Meter OVAL ALTImass Type B         OVAL Coriolis Meter OVAL ALTImass Type U         OVAL Coriolis Meter OVAL ALTImass Type S         OVAL Coriolis Meter OVAL CoriMate        OVAL Coriolis Meter OVAL MassFlex         OVAL Red-y Smart PCU 10   VOEGTLIN Red-y Compact 2 Battery Powered Mass Meter with integral flow switch   VOEGTLIN Red-y Smart Mass Meter and Mass Flow Controller   VOEGTLIN Red-y Smart Pressure Controller   VOEGTLIN Red-y Mass Flow Industrial IP67 ATEX Series    VOEGTLIN OVAL Hybrid Multirange DELTA Flow Meters   OVAL MCF Air Flow Meter   VARIOUS CMS Gas Mass Flow Meter   VARIOUS

Fuel & Oil

Magnetic Flow Meters Paddlewheel Flow Meters & Sensors Turbine Flow Meters Vortex Flow Meters: Industrial Vortex Flow Meters: Compact Gear Flow Meters Coriolis Mass Flow Meters Thermal Mass Flow Meters

Chemical

Product Name

Slurry

By Technology

Manufacturer

Page No

7 7 7 7 8 8 8 8 9 9 9 9 10 10 10 10 11 11 11 11 12 12 12 12 13 13 13 13 14 14 14 14 15 15 15 15 16 16 16 16 17 17

More products available online - www.icenta.co.uk /flow-meters


Stainless Steel

ATEX Rated

Other Gas

Dirty Water

Clean Water

Plastic

Portable

Fixed

Steam

Air

CMG Gas Mass Flow Monitor   VARIOUS OEM Models customised solutions MCS100 Miniature Mass Flow Sensor   AZBIL Small Rotary Meter complete with Electronic Display   GFO Turbine Gas Meter   GFO Rotor Gas Meter   GFO Flowmax 42i    MIB Flowmax 44i    MIB Flowmax 400i    MIB SITRANS F US SONO 3100/SITRANS FUS060   SIEMENS SITRANS FUE380    SIEMENS Ultrasonic Flow Meter 190FD (Fixed Doppler)    METRI Ultrasonic Flow Meter 190PD (Portable Doppler)    METRI Ultrasonic Flow Meters 190P and 190PLT (Portable Time of Flight)    METRI Ultrasonic Flow Meter 190F (Fixed Time of Flight)    METRI Variable Area Flow meters from GF     GEORGE FISCHER Rotameter Flow meter F VA Tubux M30    MECON Rotameter Flow meter F VA Trogflux       MECON Rotameter flow meter F VA Minix      MECON Rotameter Flow meter F VA 250      MECON Low Flow Rotameter Q flow / V 100 for Liquids & Gases     MECON Orifice Flow meter F O N4    MECON Multi Jet Water meter  VARIOUS Woltmann Water meter  VARIOUS Heat Energy Meter Package: Woltmann Water Meter + Heat Energy Calculator  VARIOUS Pro V M22 EM Vortex Heat meter   VARIOUS Multical 602  KAMSTRUP Multical 402/403  KAMSTRUP Ultraflow 54  KAMSTRUP Turbine Low Flow Sensor Signet 2100 PVDF  GEORGE FISCHER Low Flow Meter OVAL Flowmate  OVAL Fuel Oil Low flow Meter OVAL Keromate RN  OVAL Bio Tech Flow Meter  VARIOUS Metri IC LPS Flow Switch    METRI Flow Switches Flowline Thermo Flo    FLOWLINE Flow Switches Flowline Thermo Flo with Compact Relay Controller/Junction Box    FLOWLINE Rotameter Flow Switches V 100    VOEGTLIN

Fuel & Oil

Thermal Mass Flow Meters (Continued) Gas Meters Ultrasonic Flow Meters Variable Area Flow Meters & Rotameters Water Meters & Heat Meters Low Flow Meters Flow Switches

Chemical

Product Name

Slurry

By Technology

Manufacturer

Page No

17 17 18 18 18 18 19 19 19 19 20 20 20 20 21 21 21 21 22 22 22 22 23 23 23 23 24 24 24 24 25 25 25 25 26 26 26

See page 30 for a guide to choosing the correct flow meter for your project. t. +44 (0)1722 439880

e. sales@icenta.co.uk

More products available online - www.icenta.co.uk /flow-meters

3


About iCenta iCenta Controls is an independent company, established in 2002, that specialises in the supply of flow meters, level sensors, instrumentation and control systems to engineering, manufacturing and process industries throughout the UK and overseas. We are proud of our reputation for supplying high quality precision engineered instrumentation representing some of the leading names in flow and level measurement from around the world. 1. Our product range At iCenta we provide instrumentation for a wide range of fluids including water, fuels, hydrocarbons and other liquids; Air, steam and a variety of other gases including H2, Ar, He, 02, Co2, C3H8, CH4 and N2 etc. Our extensive product portfolio includes a variety of measurement technologies providing appropriate solutions for diverse applications and process conditions. 2. Providing tailored flow and level solutions We appreciate that each application is different; through our practical knowhow and many years’ experience in instrumentation across industry sectors, we will understand and evaluate your requirements and help you select the right products for your application whilst working within your budget. When we don’t have a solution we will be honest and tell you. 3. Committed to customer support We don’t just sell instrumentation. As an ISO9001:2008 accredited company, we are committed to being efficient and knowledgeable in delivering first class technical support and customer service from order through to installation and servicing/maintenance. 4. Performance guaranteed We are so confident of our service and products that if we’ve selected a product for you we will guarantee the performance of this in your application, making your decision as risk free as possible. Ask our sales engineer for further details. 5. Always competitively priced We aim to provide the most competitive pricing in the marketplace but this isn’t always possible. However, should you find a product that matches the performance and specification of one of our products, we are happy to price match*.

* conditions apply Certificate Number 5364

4

t. +44 (0)1722 439880

e. sales@icenta.co.uk

More products available online - www.icenta.co.uk /flow-meters


iCenta Services We offer a comprehensive range of services to our customers. Our consultative approach enables us to not only help you find the right flow meter, flow sensor or level instrument for your needs, our dedicated experienced team of technical engineers and staff can survey your site, calibrate your instruments and install them to your exact specification. If you aren’t looking to purchase new instruments we can help keep your existing equipment in peak condition through a cycle of survey and maintenance; making your instruments more efficient and saving you budget. Here is a brief summary of our services:

Consultation We listen to our customers needs and use a consultative approach to providing the best solution possible. We can act as an outsourced consultant providing flow and level advice, monitoring instruments and reporting on performance and making adjustments to your products to ensure you get the very best performance at all times. Installation Our dedicated team of in-house technical engineers will install your instrumentation and leave it in good working order. We operate a no fuss, no mess approach to all installations. Our knowledge and expertise will have you up and running in no time.

Calibration Over the course of a flow meters lifetime the instrument needs to be calibrated on a yearly basis to keep it performing at its best. Without being re-calibrated the accuracy of the meter often degrades resulting in inaccurate measurements and general under-performance. On receipt of your flow meter, we measure the flow rate of the instrument and provide recommendations to ensure the instrument performs to your requirements. Calibration checking can also be carried out on-site. New instrumentation can be calibrated to your exact specifications prior to dispatch. The calibration range we offer for water and various other hydrocarbons is from 10 ml/min 250m³Hr. On-Site Services We’ll visit your site and perform the service you need whether it be a survey or installation. Surveys Whether you have just one or a whole network of instruments measuring flow and/or level we’ll conduct a survey for you. The surveys we offer include; risk assessment, instrumentation location or even a simple meter count. Servicing To keep your instrumentation in perfect working order a programme of regular servicing can save you not only the cost of purchasing new kit but the time and resources involved in making the purchase.

To find out more about our services call us on +44 (0)1722 439880 or email us - we’re here to help!

t. +44 (0)1722 439880

e. sales@icenta.co.uk

More products available online - www.icenta.co.uk /flow-meters

5


Flow Meters Numerous principles of operation and design variations together with the consideration of installation parameters, location and the economies of operation can make it a daunting task when choosing the right flow meter for a particular application. Our extensive flow meter experience and product portfolio incorporates a wide range of technologies that provide high-accuracy flow metering solutions for diverse applications, fluid types and process conditions. This brochure contains a selection of flow meters available, a more detailed and comprehensive range is available at www.icenta.co.uk/flow-meters The markets we operate in...

Oil & Gas Industrial & Energy Medical & Science Research & Development Aerospace & Automotive Marine & Offshore Power Generation Water & Waste water Fluid key:

◉ Liquid ◉ Gas ◉ Steam

6

t. +44 (0)1722 439880

e. sales@icenta.co.uk

More products available online - www.icenta.co.uk /flow-meters


Magflow Meter Signet 2551 ◉

Magflow Meter Signet 2552 ◉ The Signet 2551 Magmeter is an insertion style magnetic flow sensor that features no moving parts. The patented sensor design is available in corrosion-resistant materials to provide long-term reliability with minimal maintenance costs.

Features: Bi-directional flow. Empty pipe detection. Accurate measurement even in dirty liquids.

ITEM DESCRIPTION Pipe size DN15 – DN900 Wetted Materials Polypropylene, PVDF, Stainless steel, Titanium, Hasteloy C Flow range 0.05 m/s – 10 m/s Linearity 1% Operating temp range -10 to 85ᵒC Pressure range 16 bar Outputs & Comms 4 to 20 mA 24VDC, pulsed Insertion/Inline Insertion Fluid type Clean water, dirty water, slurry Applicable liquids Water, chemicals, waste water Power 5-24 VDC Approvals/ IP Rating CE, UL Connection type Screwed (custom)

Magnetic Flow Sensor Magflux A ◉

The 2552 mag flow meter offer heavy duty, high performance with no moving parts and is constructed of corrosion-resistant materials to provide long-term reliability with minimal maintenance costs.

Features: No fitting required. Patented Mag meter technology. Diagnostic features using coloured LED lights.

ITEM DESCRIPTION Pipe size DN 50 – DN2550 Material body Stainless steel Flow range 0.05 – 10 m/s Accuracy ± 2% Operating temp range -15 to 104ᵒC Pressure range 20 Bar Outputs & Comms Frequency, digital, 4 to 30 mA Insertion/Inline Insertion Fluid type Clean water, dirty water, slurry Applicable liquids Water, chemicals, waste water Power 5-24 VDC Approvals/IP Rating CE / IP67 Connection type BSPP / NPT

Magnetic Flow Sensor Magflux S ◉ The mag-flux A type flow sensors are precision measurement devices, suitable for determining the flow rates of nearly any electrically conductive liquid – including substances such as sludge, pulp and paste.

Features: Signal amplifier inside the flow sensor. Pressure up to 250 bar. Various connection types and materials.

Magnetic Flow Meters

Magnetic Flow Meters

ITEM DESCRIPTION Pipe size DN15 – DN2500 Wetted Materials Stainless steel, Hasteloy C, PTFE, Hard rubber, Neoprene Flow range From 2.5 l/min to 4,4180 m3/hr Accuracy ± 0.15% Operating temp range -10 to 180ᵒC Pressure range Up to 250 bar Outputs & Comms Pulsed, 4-20mA, Hart, Insertion/Inline Inline Fluid type Clean water, dirty water, slurry Applicable liquids Water, sewage, chemicals, pulp, Power 12-24 VDC, 110-240VDC Approvals / IP RATING CE / IP67/68 Connection type Flanged DIN 2501, ANSI B 16.5, JIS, table, special connections

This flowmeter is particularly suitable for applications in plastic pipes without reinforcement. Integrated grounding rings guarantee best measuring results and ensure also a safe connection in steel pipes.

Features: Extremely compact and light-weight design. No additional earthing required. No additional pressure loss.

ITEM DESCRIPTION Pipe size DN15 – DN100 Material body Stainless steel with nickel plating Flow range 2.5 l/min to 283 m3/hr Accuracy ± 0.15% Operating temp range -15 to 60ᵒC Pressure range 8 – 18 bar Outputs & Comms Pulsed, 4-20mA, Hart, Insertion/Inline Inline Fluid type Clean water, dirty water, slurry Applicable liquids Water, waste water, Power 12-24 VDC, 110-240VDC Approvals /IP Rating CE / IP67/68 Connection type Wafer flanged DIN2501 / ANSI B16.5

Industry Key: ◉ Oil & Gas ◉ Industrial & Energy ◉ Medical & Science ◉ Research & Development ◉ Aerospace & Automotive ◉ Marine & Offshore ��� Power Generation ◉ Water & Wastewater Fluid Key: ◉ Liquid ◉ Gas ◉ Steam

t. +44 (0)1722 439880

e. sales@icenta.co.uk

More products available online - www.icenta.co.uk /flow-meters

7


Magnetic Flow Meters

Magnetic Flow Meters Magnetic Flow Sensor Magflux F5 ◉

Siemens TRANSMAG2 with Sitrans F M 911E Magnetic Flow Sensor ◉ The mag-flux F5 design is especially suitable for measuring small flowrates and for dosing applications (e.g. food additives or chemicals). This type of electromagnetic flowmeter is available with small inside diameters.

Features: Wide choice of process connections & materials. Robust and interference-free due to closed steel housing.

ITEM DESCRIPTION Pipe size DN2 – DN12 Wetted Materials Stainless steel, PVDF, Zirconium oxide, Hasteloy, Titanium Flow range 0 – 5 l/h Accuracy ± 0.15% Operating temp range 0 to 120ᵒC Pressure range 3.8 – 10 bar Outputs & Comms Pulsed, 4-20mA, Hart, Insertion/Inline Inline Fluid type Clean water, dirty water, slurry Applicable liquids Water, sewage, chemicals, pulp Power 12-24 VDC, 110-240VDC Approvals CE / IP67/ IP68 Connection type Thread: DIN, NPT, BSP, Flange: DIN, ANSI, JIS, Clamp DIN 11851

Magnetic Flow Meter Siemens Sitrans F M Mag 3100 ◉

The high-powered flowmeter consists of the SITRANS F M TRANSMAG 2 transmitter and the sensor SITRANS F M 911/E being the best choice for special applications such as pulsating flow, media with low conductivity and high percentage of solids.

Features: SmartPLUG concept with all the calibration data. Accurate, repeatable, fast responding and stable flow signal on heavy duty applications.

Magnetic Flow Meter Siemens Sitrans F M Mag 5100 W ◉

SITRANS F M MAG 3100 is an electromagnetic flow sensor with a large variety of liners, electrode material and with grounding electrodes as standard, all this ensures a perfect fit for almost every flow application.

Features: Designed to allow patented MAG in-situ verification using the SENSORPROM fingerprints. Approved for hazardous areas.

ITEM DESCRIPTION Pipe size DN15 – DN1000 Wetted Materials Neoprene PTFE, Hardrubber, Linatex, Novolak, Stainless steel, Hastelloy C4, Titanium Flow range 2 to 2,8275 m3/hr Accuracy ± 0.5% of measured value Operating temp range -20 to 150ᵒC Pressure range Up to 40 bar Outputs & Comms 4-20mA, Pulse, digital output, HART Communications, PROFIBUS DP Insertion/Inline Inline Fluid type Clean water, dirty water, slurry Applicable liquids Water, waste water, pulp Power 100 – 250 V AC ± 15% Approvals CE / IP67 IP68 Connection type Flanged DIN 2501, ANSI B 16.5, JIS, table, special connections

ITEM DESCRIPTION Pipe size DN15 – DN2000 Material body Stainless steel Flow range 2- 18201 m3/hr Accuracy 0.2 % ±1 mm/s Operating temp range -40 to 180ᵒC Pressure range Up to 50 bar Outputs & Comms 4-20ma, pulse, HART Communications, PROFIBUS DP, Modbus Insertion/Inline Inline Fluid type Clean water, dirty water, slurry Applicable liquids Water, waste water, chemicals Power 12-24 VDC 115-230 VAC Approvals CE, ATEX, FM, CSA, CT and drinking water approvals / IP67/68 Connection type Flanged EN 092-1 DIN 2501, ANSI B 16.5, JIS

The Sitrans MAG 5100 W with its patented composite elastomer lining is a magnetic flow meter for all water flow applications such as ground water, drinking water, waste water, sewage or sludge applications. Atex options available.

Features: Rugged NBR hard rubber liner for all water and wastewater applications. Increased low flow accuracy for water leakage detection (NBR or EPDM liner).

ITEM DESCRIPTION Pipe size DN15 – DN2000 Wetted Materials Stainless steel, EPDM, NBR, Ebonite Flow range 2- 18201 m3/hr Accuracy Cost efficient transmitter, accuracy of + 0.4 % of flow rate Operating temp range -40 to 70ᵒC Pressure range 10 – 40 bar Outputs & Comms 4-20ma, pulse, HART Communications, PROFIBUS DP, Modbus Insertion/Inline Inline Fluid type Clean water, dirty water, slurry Applicable liquids Water, Waste Water Power 12-24 VDC 115-230 VAC Approvals MCERTS, CE, drinking water approvals, IP67/68 Connection type Flanged EN 092-1 DIN 2501, ANSI B 16.5, JIS

Industry Key: ◉ Oil & Gas ◉ Industrial & Energy ◉ Medical & Science ◉ Research & Development ◉ Aerospace & Automotive ◉ Marine & Offshore ◉ Power Generation ◉ Water & Wastewater Fluid Key: ◉ Liquid ◉ Gas ◉ Steam

8

t. +44 (0)1722 439880

e. sales@icenta.co.uk

More products available online - www.icenta.co.uk /flow-meters


Magnetic Flow Meter Siemens Sitrans F M Mag 1100 / F M Mag 1100 F ◉

Magnetic Flow Meter Siemens Sitrans F M Mag 8000 ◉

A magnetic flow meter in a compact wafer design that makes it unaffected by the suspended solids, viscosity, and temperature challenges typically found within the process and pharmaceutical industries. Atex options available.

Features: Compact wafer design meets EN 1092, DIN and ANSI flange standards. Compact or remote mounting. Temperature rating up to 200 °C.

ITEM DESCRIPTION Pipe size DN 2 – DN100 Material body Stainless steel Flow range 0-282 m3/hr Accuracy ±0.2% of reading Operating temp range -40 to 200ᵒC Pressure range 40 Bar Insertion/Inline Inline Fluid type Clean water, dirty water, slurry, chemicals, Petro Chemicals Applicable liquids Water, waste water Approvals CE / ATEX Connection type Flanged, threaded, TRI clamp, RIT

Features: Simple meter placement. Low pressure loss. Bi-directional measurement.

Paddle Wheel Flow Sensors Signet 2537 Rotor X ◉ The GF Signet 2537 paddle wheel flow sensor represents an enhancement to a recognised industry standard with the added functionality of various output options, including flow switch, pulse divider, digital (S3L) or 4 to 20mA.

Simple to install with time-honoured reliable performance, Signet 515 and 2536 Rotor-X Paddlewheel Flow Sensors are highly repeatable, rugged sensors that offer exceptional value with little or no maintenance.

Features: Wide Turndown Ratio of 66:1. High resolution and noise immunity. Easy to replace rotor.

ITEM DESCRIPTION Pipe size DN15 – DN900 Material body PP, PVDF, Tefzel Flow range 1.2 l/min -51,951 m3/hr Linearity 1% Operating temp range -18 to 85ᵒC Pressure range 1.7 – 14 bar Outputs & Comms Open collector, sinking 10 mA max. Insertion/Inline Insertion/Inline Fluid type Clean water, dirty water, chemicals Applicable liquids Water, waste water, chemicals Power 5 to 24 VDC ± 10% regulated Approvals CE, FCC Connection type Screwed (custom)

ITEM DESCRIPTION Pipe size DN25 – DN1200 Material body Stainless steel Flow range 2-84 - 6552 m3/hr Accuracy ±0.2% of rate ± 2mm/s to ±0.8% of rate ± 2.5 mm/s Operating temp range -40 to 70ᵒC Pressure range 40 Bar Outputs & Comms ± 35 V DC, 50 mA short circuit protected (max) Insertion/Inline Inline Fluid type Clean water, dirty water, slurry Applicable liquids Water, waste water Power Battery, 115 – 230 V AC (mains), 12/24 V AC/DC (line) Approvals CE Connection type Flanged EN 092-1 DIN 2501, ANSI B 16.5, JIS

Paddlewheel Flow Meters & Sensors

Paddle Wheel Flow Sensor Signet 2536 Rotor X ◉

MAG 8000 is a comprehensive meter which intelligent information and high performance measurement as well as the easy to install concept take cost of ownership and customer service to a new level for water meter.

Features: Digital (S3L) and 4 to 20mA outputs. Low flow capabilities down to 0.1m/s. Low power and high resolution options.

ITEM DESCRIPTION Pipe size DN15 – DN200 Material body Polypropylene or PVDF Flow range 1.2 l/min - 51,951 m3/hr Linearity 1% Operating temp range -18 to 85ᵒC Pressure range 1.7 – 14 bar Outputs & Comms Digital (S³L), 4 to 20 mA Insertion/Inline Insertion Fluid type Clean water, dirty water, chemicals Applicable liquids Water, waste water, chemicals Power 12-24 VDC Approvals CE, FCC, UL Connection type Screwed (custom fittings)

Industry Key: ◉ Oil & Gas ◉ Industrial & Energy ◉ Medical & Science ◉ Research & Development ◉ Aerospace & Automotive ◉ Marine & Offshore ◉ Power Generation ◉ Water & Wastewater Fluid Key: ◉ Liquid ◉ Gas ◉ Steam

t. +44 (0)1722 439880

e. sales@icenta.co.uk

More products available online - www.icenta.co.uk /flow-meters

Magnetic Flow Meters

Magnetic Flow Meters/Paddlewheel Flow Meters & Sensors

9


Paddlewheel Flow Meters & Sensors

Paddlewheel Flow Meters & Sensors/Turbine Flow Meters Metri IC-IPM Insertion Paddlewheel Meter ◉

Metri IC LPM Paddlewheel Flow Meters ◉

The perfect cost effective liquid flow meter for use in Pipe sizes from 40mm and above. Designed to be simple to install and operate, this rugged turbine meter will provide accurate velocity measurement of various liquids.

Features: Simple, rugged and easy to install. Wide range of pipe materials and sizes. Battery powered option available.

ITEM DESCRIPTION Pipe size DN40 – DN900 Material body Stainless steel Flow range 25 l/min - 11600 l/min Accuracy 1% % (F.S) Operating temp range -40 to 350ᵒC Pressure range 100 bar (higher on request) Outputs & Comms AC MV, PNP/NPN, 4-20Ma Insertion/Inline Insertion Fluid type Liquids Applicable liquids Water, oils hydrocarbons, chemicals Power None, battery -24vd 110-240VAC Approvals CE, ATEX Ex ia Connection type BSPT, NPT, flanged

Features: Good accuracy with low pressure drop. High pressure rating up to 100 bar. Choice of outputs including pulse, 4-20 mA.

ITEM DESCRIPTION Pipe size DN15 – DN50 Material body Stainless steel (other materials on request) Flow range 05.5 – 1200 l/min Accuracy 1% (F.S) Operating temp range -40 to 350ᵒC Pressure range Up to 100 bar (high pressure rating on request) Outputs & Comms Coil only (mV), pulse/analogue output Insertion/Inline Inline Fluid type Clean water, dirty water, chemical, fuel & oil Applicable liquids Partially contaminated liquids including water, chemicals, hydrocarbons, mineral oils, alcohols Power None, battery -24vd 110-240 VAC Approvals General purpose, ATEX Connection type BSP, BSPT, NPT, flanged

Turbine Flow Meters

Metri IC GTM Gas Turbine Flow Meter ◉

Metri IC-LTM Turbine Flow Meters ◉

Features: Accurate measurement with excellent linearity & repeatability. High pressure rating up to + 400 bar. High temperature option up to 350°C.

The Metri IC-LPM series offers excellent corrosion resistance. Its versatile design can be adapted to meet the requirements of varying liquid flow applications or customised for OEM flow meter applications.

The meter’s versatility makes the IC-LTM suitable for applications across most industrial sectors, especially where superior accuracy is required including high temperature and high pressure flows and hygienic environments.

The Metri IC-GTM series of turbine flow meters offers high accuracy and high reliability in a wide variety of gas flow measurement applications.

ITEM DESCRIPTION Pipe size DN6 – DN150 (other sizes on request) Material body Stainless steel (other materials on request) Flow range 0.028 – 550 m³/hr Accuracy 0.25 % R.D. Operating temp range -40 to 350ᵒC Pressure range Up to 1000 bar Outputs & Comms Variable reluctance coil only (mV), pulse/analogue output Insertion/Inline Inline Fluid type Clean water Applicable liquids Water, chemicals, hydrocarbons, mineral oils, alcohol Power None, Battery -24vd 110-240 VAC Approvals CE, ATEX EEx ia Ex d, PED Connection type BSP, NPT, flanged autoclave

ITEM DESCRIPTION Pipe size DN15 – DN300 (other sizes on request) Material body Stainless steel Flow range 0.44 – 2000 m³/hr Accuracy 2% Operating temp range -40 to 350ᵒC Pressure range 400 bar (higher pressure rating on request) Outputs & Comms Coil only (mV), pulse/analogue output Insertion/Inline Inline Fluid type Gas, steam, air Applicable liquids Dry and wet gases Power None, battery -24vd 110-240VAC Approvals CE, ATEX EEx ia Ex d, PED Connection type Flanged DIN 2501, ANSI B 16.5, JIS, table, special connections

Features: Combination of high accuracy and high reliability. Threaded, flanged or wager fittings.

Industry Key: ◉ Oil & Gas ◉ Industrial & Energy ◉ Medical & Science ◉ Research & Development ◉ Aerospace & Automotive ◉ Marine & Offshore ◉ Power Generation ◉ Water & Wastewater Fluid Key: ◉ Liquid ◉ Gas ◉ Steam

10

t. +44 (0)1722 439880

e. sales@icenta.co.uk

More products available online - www.icenta.co.uk /flow-meters


OVAL Hybrid Multirange DELTA Flow Meters ◉

Vortex Flow Meter OVAL Smart EX Delta ◉

The mag-flux A type flow sensors are precision measurement devices, suitable for determining the flow rates of nearly any electrically conductive liquid – including substances such as sludge, pulp and paste.

Features: Robust welded steel design. Integrated signal amplifier.

ITEM DESCRIPTION Pipe size DN25 – DN150 Material body Stainless steel Flow range 0.6 to 15360 m³/h Accuracy ±5% Operating temp range 0 to 50ᵒC Pressure range 0 – 0.98MPa Outputs & Comms Pulsed and analogue Insertion/Inline Inline Fluid type Clean water, fuel & oil Applicable liquids Gas, compressed air Power 24VDC ± 10% Max. 150mA (4 to 20mA required for analogue output) Approvals CE Connection type BPS, flanged, ANSI, JIS

This basic model of the EX DELTA series of vortex flow meters includes a range of intelligent functions such as self diagnostics and the capability to review and change parameters.

Features: Versions for liquids or gas/steam flows. Available with fixed or replaceable sensor.

Pro V M22 EM Vortex Heat Meter ◉

Insertion Vortex Flow Meter Pro V M23 ◉

A precision multivariable in-line vortex flow meter utilising three primary sensing elements to measure the mass flow rate of liquids, gases and steam.

Multivariable flowmeter that utilises three primary sensing elements; a vortex shedding velocity sensor, an RTD temperature sensor, and a solid-state pressure transducer to measure the mass flow rate of gases, liquids and steam.

Features: Volumetric or mass flow monitoring of most liquids, gases, and steam. Energy monitoring ability to compute and output energy use.

ITEM DESCRIPTION Pipe size DN10 – DN300 Material body Stainless steel Flow range Liquid: 0.2 to 2510 m³/h, Gas: 4 to 15000 m³/h, Steam: 326 t/hr Accuracy ±1% of FS Operating temp range -30 to 460ᵒC Pressure range Up to 50 bar Outputs & Comms 4 – 20mA or pulse, HART and Fieldbus comms Insertion/Inline Inline Fluid type Clean water, dirty water, slurry, air, other gas, steam Applicable liquids Steam Power Battery Approvals ATEX, FM, CSA and TIIS approved Connection type Flanged ANSI, DIN, JIS

ITEM DESCRIPTION Pipe size DN3 – DN600 Material body Stainless steel Flow range Various see data sheet Accuracy 1.2% Liquids, 1.5% gases Operating temp range -40 to 85ᵒC Pressure range 2 – 175 bar Outputs & Comms HART, Modbus, pulsed, analogue Insertion/Inline Insertion Fluid type Clean water, dirty water, air, other gas, steam Applicable liquids Steam, various gases and liquids Power 4-20mA Approvals ATEX, FM, FMC, IECEx Connection type Flanged, ANSI, DIN, BSP

Features: Easy to install and commission. Energy Monitoring–ability to compute and output energy use.

ITEM DESCRIPTION Pipe size DN15 – DN200 Material body Carbon, stainless steel or hastelloy Flow range 0.2 970 m³/h Accuracy 1.2 % Operating temp range -40 to 85ᵒC Pressure range 2 - 175 bar Outputs & Comms HART, Modbus, pulsed, analogue Insertion/Inline Inline / Insertion Fluid type Steam, various gases and liquids Applicable liquids Liquids, gas, steam Power 4-20mA Approvals FM, FMC, ATEX, IECEx Connection type Flanged ANSI, DIN, JIS

Industry Key: ◉ Oil & Gas ◉ Industrial & Energy ◉ Medical & Science ◉ Research & Development ◉ Aerospace & Automotive ◉ Marine & Offshore ◉ Power Generation ◉ Water & Wastewater Fluid Key: ◉ Liquid ◉ Gas ◉ Steam

t. +44 (0)1722 439880

e. sales@icenta.co.uk

More products available online - www.icenta.co.uk /flow-meters

11

Vortex Flow Meters: Industrial

Turbine Flow Meters/Vortex Flow Meters: Industrial


Vortex Flow Meters: Compact

Vortex Flow Meters: Compact / Gear Flow Meters OVAL Eggs DELTA Pulse ◉

Flowpet 5G ◉ Pulse output without display and a synthetic resin body makes the Eggs DELTA Pulse an inexpensive, compact option for flow measurement, which is ideal for consumption monitoring and control of water, gas or air.

Features: Lightweight synthetic resin construction. Versions for liquid or gas flows.

ITEM DESCRIPTION Pipe size DN4 – DN25 Material body Plastic Flow range Liquid: 0.4 – 133 l/m, Gas: 7.2 – 850 l/m Accuracy ±3% of FS Operating temp range -20 to 80ᵒC Pressure range Up to 0.98MPa Outputs & Comms Pulse Insertion/Inline Inline Fluid type Clean water, dirty water, air, other gas Applicable liquids Clean water, dirty water, chemicals Power 12 to 24 VDC Approvals ATEX, TIIS, Exia II B T4, Exia II B T4 Ga/Gb Connection type BSP

Inexpensive positive displacement flowmeter mainly intended for measurement of oil and water fed to a boiler. Instantaneous and total flow indications are available in the field. Output signal is also available.

Features: High accuracy. High durability. Instantaneous flow and total flow can be monitored.

Gear Flow Meters

Flow Meter OVAL Flowmate ◉

Geared Flow Meter ECO OVAL ◉

Designed for monitoring fuel consumption of combustion appliances and heaters or elsewhere where small flow measurement is desired.

The ECO OVAL industrial geared flow meter offer high accuracy with explosion proof, including ATEX, rating for measuring flow of water, oil and chemicals. It has a versatile local register that does not require an external power source.

Features: Explosion proof rating. Selection of meter body materials available. Adjustable display viewing angle.

ITEM DESCRIPTION Pipe size DN15 – DN50 Material body Cast iron Flow range 8-24000 l/hr Accuracy 0.5% Operating temp range 0-120 ᵒC Pressure range 12 Bar Outputs & Comms 4-20mA + Pulse Insertion/Inline Inline Fluid type Clean water, fuel & oil, other gas Applicable liquids Kerosene, Gas Oil, Heavy oil (Not serviceable with gasoline) Power Battery, 12-24 VDC Approvals CE Connection type Flanged ANSI, JIS

ITEM DESCRIPTION Pipe size DN6 – DN50 Material body Cast iron / stainless steel Flow range 0.001 – 24, Accuracy 0.35% Operating temp range 0-120 ᵒC Pressure range 20 Bar Outputs & Comms Pulsed Insertion/Inline Inline Fluid type Clean water, fuel & oil, other gas Applicable liquids Kerosene, gas oil, heavy fuel oil, gasoline Power Battery, 12-24 VDC Approvals CE, ATEX Connection type Flanged ANSI, JIS

Features: Compact, lightweight flow sensors. Simple, robust construction. Ideal for metering fuels, fuel oils and lubricants.

ITEM DESCRIPTION Pipe size DN6 – DN8 Material body Aluminium / stainless steel / peek Flow range 0.09 -500 l/hr Accuracy 1% RD Operating temp range -10 to 80 ᵒC Pressure range 10 Bar Outputs & Comms Pulsed Insertion/Inline Inline Fluid type Clean water, fuel & oil, other gas Applicable liquids Kerosene, gas oil, heavy fuel oil, gasoline Power Battery, 12-24 VDC Approvals CE, ATEX Connection type BSP (female)

Industry Key: ◉ Oil & Gas ◉ Industrial & Energy ◉ Medical & Science ◉ Research & Development ◉ Aerospace & Automotive ◉ Marine & Offshore ◉ Power Generation ◉ Water & Wastewater Fluid Key: ◉ Liquid ◉ Gas ◉ Steam

12

t. +44 (0)1722 439880

e. sales@icenta.co.uk

More products available online - www.icenta.co.uk /flow-meters


Geared Flow Meter OVAL Flowpet NX ◉

Spiral Geared Flow Meter ULTRA OVAL ◉

The Flowpet-NX is a simple to use geared flow meter primarily intended for fuel oil metering. It is equipped with a local mechanical register that does not require an external power source.

Features: Robust, proven technology with inherent accuracy of measurement. Wide Flow range covered.

ITEM DESCRIPTION Pipe size DN20 – DN50 Material body Cast iron Flow range 8-24000 l/hr Accuracy 0.35% Operating temp range 0 to 120 ᵒC Pressure range 12 Bar Outputs & Comms Voltage pulse / open collector, REED switch Insertion/Inline Inline Fluid type Liquids Applicable liquids Kerosene, light oil, heavy oil (not serviceable with gasoline.) Power None / 24 VDC Approvals CE Connection type Flanged ANSI, JIS

KRAL Helical Screw Flow Meter OME Series ◉

The Spiral Geared flow meter is a highly accurate positive displacement flowmeter with a special spiral rotor. The result is a flowmeter with low noise and vibration operation.

Features: High accuracy, low noise, low vibration and no-pulsation by flow. Battery-powered model is also available.

Fuel Oil Meter OVAL Keromate RN ◉

Because of the precision measurement chamber, extremely accurate measurements of 0.1% are possible. Because of the high quality ball bearings, friction and pressure loss are low.

Features: Delivery rate from 6 to 31,500 l/h. Pressure up to 40 bar. Temperature from -20 to 125 °C.

ITEM DESCRIPTION Pipe size DN6 – DN350 Material body Stainless steel Flow range 0.001 m3/hr Accuracy 0.15%, 0.35% or 0.5% Operating temp range 250 ᵒC Pressure range 100 bar Outputs & Comms 4-20Ma / pulsed / HART Insertion/Inline Inline Fluid type Clean water, fuel & oil, other gas Applicable liquids Waters, chemicals, kerosene, light oil, heavy oil, gasoline Power Battery, 24VDC, 110-240 VAC Approvals CE, ATEX, UR, FM Connection type Screwed / flanged

ITEM DESCRIPTION Pipe size DN15 - DN25 Material body Aluminium anodized Flow range 0.1 -150 l/min Accuracy ±0.1% Operating temp range -20 to +100ᵒC Pressure range 40 bar max Outputs & Comms Pulse / comms Insertion/Inline Inline Fluid type Clean water, fuel & oil, other gas Applicable liquids Oils, water, compatible chemicals Power 24 VDC Approvals CE / ATEX Connection type BSP / flanged

A small, lightweight oval flow meter designed for monitoring domestic heating oil consumption. It is provides an accurate indication of fuel oil usage, the quantity of oil left in the tank, the right time to refill, or statistics for billing customers.

Features: Compact, lightweight flow meters. Integral LCD display. Stable at low temperatures.

ITEM DESCRIPTION Pipe size DN6 - DN8 Material body Aluminium, register PPS resin Flow range 0.1 – 30 l/hr Accuracy Better than 1% of reading Operating temp range -10⁰ to 50⁰C Pressure range 1 Bar Outputs & Comms Pulsed Insertion/Inline Inline Fluid type Clean water, fuel & oil, other gas Applicable liquids Kerosene, light oil, heavy oil (less than 100mpas) Power Battery Approvals CE Connection type Screwed supplied with custom fittings

Industry Key: ◉ Oil & Gas ◉ Industrial & Energy ◉ Medical & Science ◉ Research & Development ◉ Aerospace & Automotive ◉ Marine & Offshore ◉ Power Generation ◉ Water & Wastewater Fluid Key: ◉ Liquid ◉ Gas ◉ Steam

t. +44 (0)1722 439880

e. sales@icenta.co.uk

More products available online - www.icenta.co.uk /flow-meters

13

Gear Flow Meters

Gear Flow Meters


Gear Flow Meters

Gear Flow Meters/Coriolis Mass Flow Meters PD Flow Meter OVAL ULTRA UFII ◉

Coriolis Meter OVAL ALTImass Type B ◉ A positive displacement type flow meter which allows high accuracy flow measurement with wide rangeability in applications such as tank truck loading systems for transaction of petroleum products.

Features: Low level of rotation noise and vibration. High level of durability.

ITEM DESCRIPTION Pipe size DN75 - DN460 Material body FC250 or SCPH2 Flow range 120 – 2800 m3/hr Accuracy Totaliser +/- 0.01% Flow rate +/- 0.3 % of FS Operating temp range -10 to 60ᵒC Pressure range 0.98MPa or 1.37 MPa for SCPH2 Outputs & Comms 4/20mA and pulse Insertion/Inline Inline Fluid type Clean water, fuel, oil & chemicals Applicable liquids Water, fuel, oil & chemicals Power 12 to 45VDC Approvals Exd II BT4X CE Connection type Flanged, ANSI, DIN, JIS

Coriolis Mass Flow Meters

Coriolis Meter OVAL ALTImass Type U ◉

ALTImass Type B is an inexpensive general-purpose Coriolis flowmeter capable of direct mass flow measurement at a high degree of accuracy.

Features: Increased self-diagnostic capabilities. Fast response. Increased output signals.

Coriolis Meter OVAL ALTImass Type S ◉

Top of the range Coriolis mass meter based on U-shaped flow tubes (the most effective design for sensing Coriolis forces) offering outstanding performance with respect to accuracy, reproducibility, Flow range, pressure loss and safety.

Features: Measures mass flow rate directly. U-shaped flow tubes, the most effective design for sensing Coriolis forces.

ITEM DESCRIPTION Pipe size DN10 - DN50 Material body SUS316L SUS304 Flow range 0 - 96,000 kg/hr Accuracy ±0.1% of FS added to each accuracy Operating temp range -40 to +125ᵒC Pressure range 7.9MPa ma Outputs & Comms Bell 202 (HART protocol – Modbus -4/20mA - pulse Insertion/Inline Inline Fluid type Liquid Applicable liquids Liquid 0.3 to 2.0g/ml density Power 85 to 264VAC (50/60Hz) or 20 to 30 VDC Approvals CE Ex ib II B T3, T4 - ATEX II 2G Ex ib II B T3, T4 Gb Ex ib II B T3, T4 Connection type Flanged, ANSI, DIN, JIS

ITEM DESCRIPTION Pipe size DN3 - DN250 Material body SUS316L, SUS316L + Alloy C, Alloy C Flow range Depended on liquid and gas Accuracy 0.05 – 0.5 % depended on liquid and gas Operating temp range −200 to +200ᵒC Pressure range 9.4MPa Outputs & Comms HART –Modbus 4/20mA & Pulse Profibus Insertion/Inline Inline Fluid type Liquid and gas Applicable liquids Liquid and gas 0.3 to 2.0g/mL Power 85 to 264VAC 50/60Hz or 20 to 30 VDC Approvals ATEX II 2G Ex ib II B T3, T4 CE Connection type Flanged, ANSI, DIN, JIS

The ALTImass Type S Coriolis meter is ideally suited to mass flow measurement in sanitary processes where ease of cleaning is vital and applications where fluids tend to adhere, build-up or solidify.

Features: Corrosion resistant, all stainless steel construction Unobstructed flow path with no dead zones.

ITEM DESCRIPTION Pipe size DN15 - DN80 Material body SUS316L / SUS304 Flow range 0-72000 Kg/h Accuracy 0.1% of FS Operating temp range –40 to +130ᵒC Pressure range Up to 2.45MPa Outputs & Comms Bell 202 (HART protocol – Modbus -4/20mA - pulse Insertion/Inline Inline Fluid type Liquid Applicable liquids Various Power 85 to 264VAC 50/60Hz or 20 to 30 VDC Approvals ATEX II 2G Ex ib II B T3, T4 CE Connection type Flanged, ANSI, DIN, JIS

Industry Key: ◉ Oil & Gas ◉ Industrial & Energy ◉ Medical & Science ◉ Research & Development ◉ Aerospace & Automotive ◉ Marine & Offshore ◉ Power Generation ◉ Water & Wastewater Fluid Key: ◉ Liquid ◉ Gas ◉ Steam

14

t. +44 (0)1722 439880

e. sales@icenta.co.uk

More products available online - www.icenta.co.uk /flow-meters


Coriolis Meter OVAL CoriMate ◉

Coriolis Meter OVAL MassFlex ◉ The CoriMate is a miniaturised Coriolis mass meter for low flow rates where the flow sensor and transmitter (with display) are assembled in a one-piece construction.

Features: Flow sensor and transmitter (with display) assembled in a one-piece construction. Vibration proof case not required.

ITEM DESCRIPTION Pipe size DN0.7 - DN3 Material body SUS316L Flow range 2700 g/min Accuracy ±0.1% of F.S.F. (below 33% ) 0.3% RD. (33% to 100% of flowrate) Operating temp range −10 to +60ᵒC Pressure range 2MPa Outputs & Comms Bell 202 (under HART protocol) 4/20ma & pulse Insertion/Inline inline Fluid type Clean water, dirty water, fuel & oil, chemicals Applicable liquids Various Power 20 to 30VDC Approvals Directive : 2004/108/EC Connection type Screwed BSP Rc 1/8

The process control unit PCU 10 is ideally suited to power and control up to ten red-y smart mass flow meters, controllers and pressure controllers.

Features: Display of the gas flow set value for each connected meter and controller. Gas mixer with up to 12 recipes.

ITEM DESCRIPTION Pipe size N/A Material body N/A Flow range N/A Accuracy N/A Operating temp range 0 to 50ᵒC Pressure range N/A Outputs & Comms RS-485C Insertion/Inline Panel mount mass flow display Gas Type Air, O2*, N2*, He, Ar, CO2, H2, CH4, C3H8 (other gases and gas mixtures on request) Power 24 VDC Approvals N/A Connection type 1 Sub-D 9-pin connector for RS-485C Modbus RTU

Features: Micro Coriolis mass flow meter for extremely low flows from 0.2 g/min. Operates under pressures up to 150 bar (liquids).

ITEM DESCRIPTION Pipe size DN6 Material body SUS316L Flow range 0 to 150 g/min Accuracy ±/- 0.2% liquid - ±/- 0.5% gas Operating temp range -200 to +200oC Pressure range Liquid 15MPa at 20ᵒC to gas 0.98MPa Outputs & Comms Status input/output – 4/20mA & pulse Insertion/Inline Inline Fluid type Clean water, dirty water, slurry, fuel & oil, air, other gas Applicable liquids Liquid and gases Power 85 to 264VAC (50/60Hz) or 20 to 30 VDC Approvals ATEX TIIS (Exib II BT3, Exib II BT4) Connection type Screwed male BSP 1/4″

Red-y Compact 2 Battery or 24 Volt Powered Mass Meter with Integral Flow Switch ◉

Thermal Mass Flow Meters

Red-y Smart PCU 10 ◉

High precision, microflow Coriolis mass meter for pressures up to 15MPa and with explosion-proof enclosure.

The Red-y compact series from Voegtlin comprises compact, battery-powered thermal mass flow meters with options for manual valves and alarm functions.

Features: Extremely compact unit. Real gas calibration. CMOS sensor technology.

ITEM DESCRIPTION Pipe size DN6 - DN25 Material body Anodized aluminium, optional stainless steel electropolished Flow range 0 – 6000 mln/min Accuracy ± 2.0% of full scale Operating temp range 0 to 50ᵒC Pressure range 0.2 – 11 bar Outputs & Comms N/A Insertion/Inline Inline Gas Type Air, O2*, N2*, He, Ar, CO2, H2, CH4, C3H8 (other gases and gas mixtures on request) Power Standard AA Battery, 24 Vdc Approvals CE Connection type BSP, VCR, custom, (manifold)

Industry Key: ◉ Oil & Gas ◉ Industrial & Energy ◉ Medical & Science ◉ Research & Development ◉ Aerospace & Automotive ◉ Marine & Offshore ◉ Power Generation ◉ Water & Wastewater Fluid Key: ◉ Liquid ◉ Gas ◉ Steam

t. +44 (0)1722 439880

e. sales@icenta.co.uk

More products available online - www.icenta.co.uk /flow-meters

Coriolis Mass Flow Meters

Coriolis Mass Flow Meters / Thermal Mass Flow Meters

15


Thermal Mass Flow Meters

Thermal Mass Flow Meters and Controllers Red-y Smart Mass Meter and Mass Flow Controller ◉

Features: Measures mass flow rate directly. Short response time: 50ms. High accuracy flow measurement and control with wide dynamic range.

Red-y Smart Pressure Controller ◉

Red-y smart mass meters and controllers make use of the latest MEMS technology and have a digital (Modbus RTU) and analog interface. Available in standard economic or hi-performance options.

Red-y smart pressure controllers from Voegtlin of Switzerland combine reliable thermal mass flow technology with electronic pressure control.

ITEM DESCRIPTION Pipe size DN6 - DN12 Material body Aluminium / stainless steel Flow range 0.05 – 450l/min Accuracy 0.3% or 1% Operating temp range 0 to 50ᵒC Pressure range 10BarG Outputs & Comms 4/20mA 0-20mA 0-5V 1-5V 0-10V 2-10V – Modbus - Profibus Insertion/Inline Inline Gas Type Air, O2*, N2*, He, Ar, CO2, H2, CH4, C3H8 (other gases and gas mixtures on request) Applicable liquids N/A Power 24VDC Approvals CE Connection type G (BSP), VCR, custom manifold

ITEM DESCRIPTION Pipe size DN6 - DN12 Material body Aluminium / stainless steel Flow range 0.05 – 450l/min Accuracy 0.3% or 1% Operating temp range 0 to 50ᵒC Pressure range 10BarG Outputs & Comms 4/20mA 0-20mA 0-5V 1-5V 0-10V 2-10V – Modbus - Profibus Insertion/Inline Inline Gas Type Air, O2*, N2*, He, Ar, CO2, H2, CH4, C3H8 (other gases and gas mixtures on request) Applicable liquids N/A Power 24VDC Approvals CE Connection type G (BSP), VCR, custom manifold

Red-y Mass Flow Industrial IP67 ATEX Series ◉

Features: High accuracy flow measurement and pressure control with wide dynamic range. Compact design, simple installation.

OVAL Hybrid Multirange DELTA Flow Meters ◉

Voegtlin’s tried and tested mass flow meters and mass flow controllers are now available with IP67/NEMA 6 protection against solid particles and water and ATEX certification (Category 3 / Zone 2 & 22) for rough environments.

Features: IP67 / NEMA 6 protection against solid particles and water. Calibrated with real gas, which guarantees high accuracy and reproducibility.

ITEM DESCRIPTION Pipe size DN6 - DN12 Material body Stainless steel Flow range 0.05 – 450l/min Accuracy 0.3% or 1% Operating temp range 0 to 50ᵒC Pressure range 10BarG Outputs & Comms 4/20mA 0-20mA 0-5V 1-5V 0-10V 2-10V – Modbus - Profibus Insertion/Inline Inline Gas Type Air, O2, N2, He, Ar, CO2, H2, CH4, C3H8 (other gases and gas mixtures on request) Power 24VDC Approvals ATEX Connection type G (BSP), VCR, custom manifold

OVAL Hybrid Multirange DELTA flow meters combine vortex flow technology with a thermal mass flow meter, overcoming the difficulties of measuring low Flow ranges with a standard vortex meter and offering a wide Flow range.

Features: Built in temperature and pressure sensors. Measures mass and volume flow rates.

ITEM DESCRIPTION Pipe size DN25 - DN150 Material body A5052 SCS13A SUS316 Flow range 0.6 to 360 – 11520 m3/h Accuracy ±5% of reading ±0.05% of max. flowrate Operating temp range 0 to 50ᵒC Pressure range 0 to 0.78MPa (Option 0 to 0.98MPa) Outputs & Comms Pulse – 4/20mA + alarm Insertion/Inline Inline Gas Type Compressed air and nitrogen Power 24VDC Approvals EN55011 : 1998/A1 : 1999/A2 : 2002 Group 1, Class B EN61000-6-23 : 2001 Connection type Screwed BSP, flanged ANSI, JIS, DIN

Industry Key: ◉ Oil & Gas ◉ Industrial & Energy ◉ Medical & Science ◉ Research & Development ◉ Aerospace & Automotive ◉ Marine & Offshore ◉ Power Generation ◉ Water & Wastewater Fluid Key: ◉ Liquid ◉ Gas ◉ Steam

16

t. +44 (0)1722 439880

e. sales@icenta.co.uk

More products available online - www.icenta.co.uk /flow-meters


MCF Air Flow Meter ◉

CMS Gas Mass Flow Meter ◉ A series of dedicated air or nitrogen mass flow meters, indispensable for managing energy use with compressed air / nitrogen.

Features: Reverse flow detection function. Easy maintenance without removal from the piping. Thermal mass flow measurement.

ITEM DESCRIPTION Pipe size DN6 - DN50 Material body Aluminium Flow range 0-200 / 12000 l/min Accuracy +/- 3% Operating temp range -10 to 60ᵒC Pressure range 1.5Mpa Outputs & Comms 4/20ma + pulse/event – option modbus Insertion/Inline Inline Gas Type Air, nitrogen gas Power 24VDC Approvals CE Connection type Screwed BSP

CMG Gas Mass Flow Monitor ◉

Features: Micro flow sensor offers high accuracy. Micro flow sensor eliminates need for straight run piping upstream of meter.

ITEM DESCRIPTION Pipe size DN6 - DN25 Material body Aluminium & stainless steel Flow range 0.5 to 1500 l/min Accuracy 0.2% 0.5% 1% dependant on gas on range Operating temp range -10 to 60ᵒC Pressure range 0.07 -1Mpa Outputs & Comms 4/20mA 0-5V 1-5V + 2x pulse user selectable Insertion/Inline Inline Gas Type Air, nitrogen, argon, carbon dioxide, oxygen, methane, helium hydrogen Power 12-24VDC Approvals CE Connection type 9/16 – 18 UNF Rc ¼” ¼” - ½” 1” Swagelok 1/3 VCR or equivalent

OEM Models Customised Solutions ◉ The CMG series offers a wide range of functions, such as instantaneous and integrated flow rate indication, and event output and analog output.

Features: Displays instantaneous or totalised flow. Low pressure loss making it suitable for a wide range of burner applications.

The CMS is a highly reliable and versatile series of gas mass flow meters that uses a µF (Micro Flow) sensor as its sensing element. The integration of the µF sensor and advanced channel design technology has achieved high accuracy and high rangeability at a low cost.

Designed for stress-free integration within original equipment manufacturer (OEM) products, BASIS features a small footprint, high-accuracy MEMS sensor and Alicat’s leading fast valve control.

ITEM DESCRIPTION Pipe size DN15 - DN50 Material body Cast aluminium Flow range 0.2 – 170 m3/hr Accuracy +4% Operating temp range -10 to +60°C Pressure range 0 to 100 kPa (0 to 1bar) Outputs & Comms 4/20 mA 1-5V + relay Insertion/Inline Inline Fluid type Air, city gas, butane propane Power 24V DC,100V AC, 200 VAC Approvals CE Connection type Screwed Rc ½” 1” 1.5” 2” JIS flange

Customised solutions can be created for specific customer requirements.

Industry Key: ◉ Oil & Gas ◉ Industrial & Energy ◉ Medical & Science ◉ Research & Development ◉ Aerospace & Automotive ◉ Marine & Offshore ◉ Power Generation ◉ Water & Wastewater Fluid Key: ◉ Liquid ◉ Gas ◉ Steam

t. +44 (0)1722 439880

e. sales@icenta.co.uk

More products available online - www.icenta.co.uk /flow-meters

17

Thermal Mass Flow Meters

Thermal Mass Flow Meters


Thermal Mass Flow Meters

Thermal Mass Flow Meters/Gas Meters MCS100 Miniature Mass Flow Sensor ◉

Small Rotary Meter complete with Electronic Display ◉

The MCS100 is a compact, fast response air mass flow sensor equipped with a µF (Micro Flow) sensor chip. The MCS100 offers a various Flow range, in addition to its wide rangeability.

Features: Fast response time: 5 ms max. High accuracy and high repeatability. Low power consumption.

ITEM DESCRIPTION Pipe size DN5 (M5 female brass insertion) Material body PPS resin, ceramic (printed wiring board) and brass (connecting part) Flow range –3 to +3L/min - 0 to 3L/min –0.5 to +0.5L/min 0 to 0.5L/min Accuracy + 5% FS max. Operating temp range 0 to 50ᵒC Pressure range –70 to +200kPa Outputs & Comms Output voltage 4V (5 to 1V) for full scale Insertion/Inline inline Gas Type Air and nitrogen. Power 12 to 24 VDC Approvals CE Connection type BSP

Gas Meters

Turbine Gas Meter ◉

The meter belongs to the group of positive displacement meters where pre-determined volumes of gas passing by means of two counter-rotating impellers or rotors. ITEM DESCRIPTION Pipe size DN40 Material body Aluminium Flow range G10, G16, G25 Accuracy 0.2 Q max to Qmax ±1% or better, Qmin to 0.2 Qmax: ±2% or better Operating temp range -25ᵒ to 60ᵒC Pressure range PN10/16, ANSI 150 Outputs LF Insertion/Inline Inline Gas type Natural, Town, Propane and Inert gases Power Battery Approvals N/A Connection type DIN, ANSI

Features: Robust design. Less vulnerable to improper start up or operation.

Rotor Gas Meter ◉ The Turbine Gas Meter measures gas velocity. The flowing gas is narrowed, accelerated and conditioned by the meter upstream straightening section. The dynamic forces of the fluid cause the turbine rotor to rotate.

Features: The turbine rotor is mounted onto an axial shaft with high precision low friction stainless steel ball bearings.

ITEM DESCRIPTION Pipe size DN50 - DN200 Material body Aluminium, Carbon Steel, GGG40 Flow range 5 m³/h up to 4000 m³/h Measuring range 20:1 - 50:1 Accuracy 0.2 Qmax to Qmax ±1% or better, Qmin to .02Q max: ±2% or better Operating temp range -25ᵒ to 60ᵒC standard -40ᵒC to 80ᵒC Pressure range PN10/16 and ANSI 150 Outputs & Comms Pulse Insertion/Inline Inline Gas Type Natural, town, propane and inert gases Power N/A Approvals IP65, DIN 338000, EN 12261 (MID 2004/22/EC) Connection type DIN, ANSI, JIS and other flanges

The principal of the Rotor Gas Meter is well known. It is a positive displacement type of meter, passing pre-determined volumes of gas by means of two counter-rotating rotors or impellers.

Features: No bending, no twisting, no torque affects. The bearings are placed outside of the timing gears.

ITEM DESCRIPTION Pipe size DN40 - DN200 Material body Aluminium Flow range 0.3 m³/h - 1.600 m³/h Accuracy 0.2 Q max to Q max: ±% or better, Q min to 0.2 Q max: ±2% or better Operating temp range -25ᵒ up to 60ᵒC (-40ᵒ to 80ᵒC on request) Pressure range PN10/16 ANSI 150 Outputs & Comms LF pulse and/or HF pulse output, encoder output Insertion/Inline Inline Gas Type Natural, town, propane and inert gases Power N/A Approvals Index IP68, based on PED EN 12480 & OIML-R137-1 (2012) Connection type DIN, ANSI, JIS and other flanges

Industry Key: ◉ Oil & Gas ◉ Industrial & Energy ◉ Medical & Science ◉ Research & Development ◉ Aerospace & Automotive ◉ Marine & Offshore ◉ Power Generation ◉ Water & Wastewater Fluid Key: ◉ Liquid ◉ Gas ◉ Steam

18

t. +44 (0)1722 439880

e. sales@icenta.co.uk

More products available online - www.icenta.co.uk /flow-meters


Flowmax 42i ◉

Flowmax 44i ◉ Flowmax 42i is a flow meter calculating the volume flow of liquids. Based on the ultrasonic technology Flowmax 42i is able to measure conductive and non-conductive liquids contactfree.

Features: Measuring the volume of liquids such as DI-water, cosmetics, liquid food and agressive and/or toxic acids or alkalis with no moving parts.

ITEM DESCRIPTION Pipe size DN12 - DN25 Material body PE-HD (Polyethylene) or PVDF (Polyvinylidenfluoride) Flow range 0.3 - 21 0.9 - 36 3.5 - 60 5.0 – 240 l/min Accuracy ±1%o.r. ±3mm/s (o.r. = of reading) Operating temp range 0 to 60OC Pressure range 7BarG Outputs & Comms 0/4-20mA, RS485-data interface Insertion/Inline Inline Fluid type Liquid Applicable liquids Clean water, chemicals toxic acids and alkalis & DI-water Power 24 VDC, ca. 3.6W Approvals CE Connection type BSP

Flowmax 400i ◉

Flowmax 44i is a flowmeter for measuring liquid flow by calculating the volume flow rate in the liquid. Based on the Ultrasonic-Technology Flowmax is able to measure conductible and not conductible liquids contactless.

Features: Measuring the volume of liquids such as DI-water, cosmetics, liquid food and agressive and/or toxic acids or alkalis with no moving parts.

ITEM DESCRIPTION Pipe size DN15 - DN32 Material body Polysulfane Flow range 0.3 - 21 0.9 - 36 3.5 - 60 5.0 – 240 l/min Accuracy ±2%o.r. ±3mm/s (o.r. = of reading), option ±1% o.r. ±3mm/s Operating temp range -10 to 80ᵒC Pressure range 16 BarG – 10BarG Outputs & Comms Modbus – 4/20mA – Pulse - Event Insertion/Inline Inline Fluid type Liquid Applicable liquids Clean water, chemicals toxic acids and alkalis & DI-water Power 24 VDC, ca. 3.6W Approvals CE Connection type BSP, NPT BKS-Clamp DIN 11864

SITRANS F US SONO 3100/SITRANS FUS060 ◉ Flowmax® 400i has no moving parts and is free of wear. The design of the pipe minimizes dead space over the whole geometry.

Features: Measuring the volume of liquids such as DI-water, cosmetics, liquid food and agressive and/or toxic acids or alkalis with no moving parts.

ITEM DESCRIPTION Pipe size DN15 - DN25 Material body PFA (new teflon). Flow range 0,03/0,09 - 6 0,3 - 24 0,9 - 60 1,2 – 120 l/min Accuracy ±1% o.r. ±3 mm/s (o.r. = of reading) Operating temp range 0 to 80OC Pressure range 7 Bar G Outputs & Comms 0/4-20 mA, RS485-interface + 2 digital outputs Insertion/Inline Inline Fluid type Liquid Applicable liquids Clean water, chemicals toxic acids and alkalis & DI-water Power 24 VDC / 3,6W Approvals CE Connection type Sealless tube connection (flare)

The SITRANS F US SONO 3100 / SITRANS FUS060 flowmeter consists of a SITRANS F US SONO 3100 sensor with O-ring or flange transducers depending on the application.

Features: Optimal solution for fiscal metering as it meets OIML R117 requirements. Designed for remote installation in hazardous as well as non-hazardous environments.

ITEM DESCRIPTION Pipe size DN100 – DN600 Material body Steel EN. 1.0345-P235GH Flow range 28 – 4200 m3/h Accuracy 0.25 - 0.5 % Operating temp range -20 to 200OC Pressure range PN40 Outputs & Comms Pulse / analogue / hart / profibus / relay Insertion/Inline Inline Fluid type Clean water, waste water Applicable liquids Oils and liquefied gases Power 120/230 Vac -21- 30 VDC Approvals ATEX II 2G Ex Exd Connection type Flanged ANSI, DIN, JIS

Industry Key: ◉ Oil & Gas ◉ Industrial & Energy ◉ Medical & Science ◉ Research & Development ◉ Aerospace & Automotive ◉ Marine & Offshore ◉ Power Generation ◉ Water & Wastewater Fluid Key: ◉ Liquid ◉ Gas ◉ Steam

t. +44 (0)1722 439880

e. sales@icenta.co.uk

More products available online - www.icenta.co.uk /flow-meters

19

Ultrasonic Flow Meters

Gas Meters/Ultrasonic Flow Meters


Ultrasonic Flow Meters

Ultrasonic Flow Meters Ultrasonic Flow Meter 190FD (Fixed Doppler) ◉

SITRANS FUE380 ◉

The 190FD is a fixed transit time, Doppler ultrasonic flow meter designed for liquid flow measurement, especially where dirty or aerated waste water conditions prevail and any invasion of the pipework could cause inline meter problems.

The 2-track SITRANS FUE380 is the custody transfer approved version of SITRANS FUS380. It can be verified and sealed for use in various countries.

Features: Flexibility to customize your perfect flowmeter solution. Designed to provide accurate highresolution energy measurement.

ITEM DESCRIPTION Pipe size DN50 - DN1200 Material body Carbon steel / stainless steel transducers Flow range 15 – 36000 m3/h (0.02 ..9m/s) Accuracy +-0.5% Operating temp range -10 to 60OC Pressure range 16 - 40 BarG Outputs & Comms 2 x Pulse Insertion/Inline Inline Fluid type Liquid Applicable liquids Heating water Power 115/230 VAC .. 3.6V battery Approvals CE PED Connection type Flanged ANSI, DIN, JIS

Features: A cost effective clamp-on non-invasive ultrasonic flow meter. Advanced matrix array Doppler sensor.

Ultrasonic Flow Meters 190P and 190PLT (Portable Time of Flight) ◉

Ultrasonic Flow Meter 190PD (Portable Doppler) ◉

The 190P and 190PLT are lightweight, high quality, portable, clamp-on transit time flow meters designed to meet the flow measurement needs of service, maintenance and commissioning engineers.

The Precision Flow 190PD is a lightweight, high quality, transit time, and Doppler flowmeter designed to meet the flow measurement needs of the service, maintenance and commissioning engineer.

Features: Ideal for both dirty and clean fluids. Latest correlation and Doppler signal detection systems.

ITEM DESCRIPTION Pipe size DN20 - DN1200 Material body Various Flow range 0.05 m/sec to 10 m/sec doppler Accuracy ± 2% FS Operating temp range -6 to 50OC Pressure range N/A Outputs & Comms 4/20mA Pulse + RS232 Insertion/Inline Clamp -on Fluid type Dirty liquid Applicable liquids Dirty water, slurry Power 100-240Vac 18-36VDC Approvals CE Connection type Clamp-on

ITEM DESCRIPTION Pipe size DN100 - DN6500 YPG - DN5 - DN300 WPG Material body Clamp-on sensors – Resins / steel Flow range 0.05 m/sec to 10 m/sec doppler - 0.01 m/sec to 25 m/sec time transit Accuracy Resolution : 0.1% of full scale Operating temp range 0 to +50OC Pressure range N/A Outputs & Comms 4/20mA Pulse + RS232 Insertion/Inline Inline Fluid type Liquid Applicable liquids Clean water, dirty water, slurry, oils Power 100-240Vac 18-36VDC Approvals CE Connection type Clamp-on

Features: Data logger with graphical display of data. Built in help function.

ITEM DESCRIPTION Pipe size DN15 - DN300 Material body Clamp-on sensors - resins / steel Flow range Dependant on pipesize 0.01 m/sec to 25 m/sec Accuracy Resolution : 0.1% of full scale Operating temp range 0 to +50ºC Pressure range N/A Outputs & Comms 4/20mA pulse + RS232 Insertion/Inline External clamp on sensors Fluid type Clean water, dirty water, slurry Applicable liquids Liquid Power 100-240Vac 18-36VDC Approvals CE Connection type Clamp-on

Industry Key: ◉ Oil & Gas ◉ Industrial & Energy ◉ Medical & Science ◉ Research & Development ◉ Aerospace & Automotive ◉ Marine & Offshore ◉ Power Generation ◉ Water & Wastewater Fluid Key: ◉ Liquid ◉ Gas ◉ Steam

20

t. +44 (0)1722 439880

e. sales@icenta.co.uk

More products available online - www.icenta.co.uk /flow-meters


Ultrasonic Flow Meter 190F (Fixed Time of Flight) ◉

Variable Area Flow Meters from GF ◉

The 190F is a fixed transit time, clamp-on ultrasonic flow meter designed for liquid flow measurement, especially where sterile conditions prevail and any invasion of the pipework could cause contamination.

Features: Analog and digital outputs. Data logger with local display of data (graphically or as text).

ITEM DESCRIPTION Pipe size DN15 - DN300 Material body Clamp-on sensors - resins / steel Flow range Dependant on pipe size 0.01 m/sec to 25 m/sec Accuracy Resolution : 0.1% of full scale Operating temp range 0 to +50OC Pressure range N/A Outputs & Comms 4/20mA Pulse + RS232 Insertion/Inline External clamp on sensors Fluid type Liquid Applicable liquids Clean water, oils Power 100-240Vac 18-36VDC Approvals CE Connection type Clamp-on

Features: Equipped with a double scale; percentage and volume in l/h for water. Special scales are available for m³/h.

Rotameter Flow Meter F VA Trogflux ◉

The Mecon F VA Tubux M30 is a variable area flow meter with a glass flow tube for measuring the volume of transparent liquids and gases passing through closed piping.

Features: Product scales for liquids and gases. Rugged versions with various materials.

ITEM DESCRIPTION Pipe size DN10 - DN75 Material body Polysulfon / polyamid Flow range 25 - 60,00 l/hr Accuracy class 4 VDE/VDI 3513 Part 2. Operating temp range 60 to 100ᵒC dependant on material Pressure range 10 Outputs & Comms 2 limit switches - 4/20mA Insertion/Inline Inline Fluid type Clean water, fuel & oil Applicable liquids Clean liquids chemicals oils Power Switch rating 250VAC DC Approvals CE Connection type Clamp-on sensors

ITEM DESCRIPTION Pipe size DN6 - DN50 Material body Stainless steel Flow range Liquid 1.1-10,000 l/h Air 320-180,000 l/hr Accuracy Liquids G 1,6 qG 50% gases G 2,5 qG 50% (acc. to VDE/VDI 3513, Operating temp range -10 to 150ᵒC dependant on material Pressure range 10 BarG Outputs & Comms 2 limit switches Insertion/Inline Inline vertical Fluid type Clean water, air, other gases Applicable liquids Clean liquids chemicals oils Power Switch rating 250VAC DC Approvals CE Connection type BSP, NPT, flanged DIN, ANSI, custom.

The Mecon F VA Trogflux is a low cost variable area flow meter that is designed to measure the volume of transparent liquids or gases (eg air, nitrogen, hydrogen, oxygen, argon, helium) passing through closed plastic piping.

Features: Product scales for liquids and gases. Simple assembly and handling. Low cost plastic design.

ITEM DESCRIPTION Pipe size DN6 - DN50 Material body Plastic trogamide or polysulfone Flow range 2 l/min to 25³/hr (liquids), 0.03 l/min to 4.30 m³/hr (air & other gas) Accuracy Class 2, 5 Operating temp range 90OC max Pressure range Up to 10bar Outputs & Comms Switched Insertion/Inline Inline Fluid type Liquids & gases Applicable liquids Various clean liquids (water, oils etc) Power N/A Approvals CE Connection type Threaded BSP / solvent weld

Industry Key: ◉ Oil & Gas ◉ Industrial & Energy ◉ Medical & Science ◉ Research & Development ◉ Aerospace & Automotive ◉ Marine & Offshore ◉ Power Generation ◉ Water & Wastewater Fluid Key: ◉ Liquid ◉ Gas ◉ Steam

t. +44 (0)1722 439880

e. sales@icenta.co.uk

More products available online - www.icenta.co.uk /flow-meters

21

Variable Area Flow Meters & Rotameters

Rotameter Flow meter F VA Tubux M30 ◉

iCenta is a UK specialist in +GF+ Signet instrumentation GF rotameters are suitable for a wide range of applications and variety of media - simply choose the materials for both tubes and screwed fittings.

Ultrasonic Flow Meters

Ultrasonic Flow Meters / Variable Area Flow Meters & Rotameters


Variable Area Flow Meters & Rotameters

Variable Area Flow Meters & Rotameters Rotameter Flow Meter F VA 250 ◉

Rotameter Flow Meter F VA Minix ◉

An all-metal variable area flow meter for liquids and gases up to 300 ᵒC. With a standard length of 250 mm and a completely metal design the F VA 250 rotameter can be used to measure many different types of liquids and gases.

The Mecon F VA Minix aluminium variable area flow meters with glass flow tube are used to measure the volume of transparent liquids and gases passing through closed piping.

Features: Product scales for liquids and gases. Rugged versions with various materials. Can be used for high flow rates.

ITEM DESCRIPTION Pipe size DN6 - DN15 Material body Brass, stainless steel, glass Flow range 0.1 l/hr - 500 l/hr (liquids), 2 l/hr - 8000 l/hr (gases) Accuracy Various Operating temp range -10OC to 70OC Pressure range Up to 10bar Outputs & Comms N/A Insertion/Inline Inline Fluid type Liquids & gases Applicable liquids Clean liquids & gases Power N/A Approvals CE Connection type Threaded BSP/NPT

Low Flow Rotameter Q Flow/ V 100 for Liquids & Gases ◉

Features: Can also be used for corrosive and flammable media. Use possible at high pressures and temperatures.

ITEM DESCRIPTION Pipe size DN15 - DN100 Material body 316Ti Flow range 16-100000 l/h liquid, 0.5-630m3/h air Accuracy +- 1.6 – 2.0% Operating temp range 0 to 300OC Pressure range <PN40 (580psi) Outputs & Comms 4-20mA, 0-20mA, alarms Insertion/Inline Inline Fluid type Clean water, fuel & oil, air, other gas Applicable liquids 1-50 cP viscosity Power DC12-30V Approvals ATEX Connection type BSP, NPT, flanged DIN, ANSI, custom Wetted materials 316Ti, aluminium, titanium, hastelloy C, PTFE

Orifice Flow Meter F O N4 ◉

V-100 is a flexible range of variable area flow meters from Voegtlin Instruments for gases or liquids, particularly for laboratory use and at low flow rates.

Features: Customer-specific scales. Spherical float for optimised stability. Compact and slim design.

ITEM DESCRIPTION Pipe size DN6 - DN15 Material body Aluminium/stainless steel Flow range 0.6 – 1600m3/h Accuracy ± 2%FS Operating temp range 0 to 60OC Pressure range PN10 Outputs & Comms Alarms Insertion/Inline Inline Fluid type Clean water and gases Applicable liquids and Gases Various gases and clean liquids Power N/A Approvals PED (SEP) Connection type Wafer

Features: Suitable for any mounting positions without reduction in accuracy. Simple installation.

ITEM DESCRIPTION Pipe size DN25 – DN400 Material body PVC, 316Ti Flow range 0.6 – 1600m3/h Accuracy ± 2%FS Operating temp range 0 to 60OC Pressure range PN10 Outputs & Comms Alarms Insertion/Inline Inline Fluid type Clean water, Applicable liquids Clean liquids only, water, compatible chemical and liquids Power No power required Approvals PED (SEP) Connection type Wafer

Industry Key: ◉ Oil & Gas ◉ Industrial & Energy ◉ Medical & Science ◉ Research & Development ◉ Aerospace & Automotive ◉ Marine & Offshore ◉ Power Generation ◉ Water & Wastewater Fluid Key: ◉ Liquid ◉ Gas ◉ Steam

22

t. +44 (0)1722 439880

e. sales@icenta.co.uk

More products available online - www.icenta.co.uk /flow-meters


Multi Jet Water Meter (Cold and Hot Water Meters Available) ◉

Woltmann Water Meter ◉

A range of mechanical, inline, multijet water meters for Pipe sizes 15 to 50 mm and suitable for cold and hot water up to 90 degrees C. These multijet water meters have WRAS approval and are pulse outputs are fitted as standard.

Features: EEC Class B Approved. Working Pressure: 16 Bar. For cold (30°C) or hot (90°C) water.

ITEM DESCRIPTION Pipe size DN15 – DN50 Material body Brass Flow range 0.03 – 30 m3/h Accuracy ± 2% Operating temp range 0 to 90OC Pressure range Up to 16 bar Outputs & Comms Pulse Insertion/Inline Inline Fluid type Clean water Applicable liquids Water Power No power required Approvals WRAS Connection type Screwed, flanged, DIN

Heat Energy Meter Package: Woltmann Water Meter + Heat Energy Calculator ◉

A range of Woltmann type, helix driven, water meters for cold, hot and high temperature water with ductile iron bodies (epoxy powder coated) and flanged or threaded connections for Pipe sizes 50 to 500 mm. These Woltmann water meters have WRAS approval and pulse outputs are fitted as standard.

Features: EEC Class B Approved. Working Pressure: 16 Bar. For cold (30°C), hot (90°C) or high temperature (130°C) water.

Pro V M22 EM Vortex Heat Meter ◉

A heat energy meter package that includes a wall mounted heat energy calculator together with a dry dial Woltmann water meter. The water meters have WRAS approval, are suitable for cold and hot water up to 90 degrees C and for Pipe sizes from 50 to 80mm.

Features: A versatile, economical heat and energy meter that can operate in remote locations.

ITEM DESCRIPTION Pipe size DN50 – DN500 Material body Epoxy powder coated Flow range 0.45 – 3000 m³/hr Accuracy Class B Operating temp range 30 to 120OC Pressure range 16 bar Outputs & Comms Pulse Insertion/Inline Inline Fluid type Clean water Applicable liquids Water Power 0–24 VDC Approvals EEC Class B, WRAS Connection type Flanged PN16

ITEM DESCRIPTION Pipe size DN50 – DN500 Material body Epoxy power coated Flow range 0.45 – 3000 m³/hr Accuracy Class B Operating temp range 30 to 130OC Pressure range 16 bar Outputs & Comms Pulse Insertion/Inline Inline Fluid type Clean water Applicable liquids Water Power 0-24 VDC Approvals EEC Class B, ISO, WRAS Connection type Flanged PN16

The Pro-V M22 is a precision multivariable in-line vortex flow meter utilising three primary sensing elements to measure the mass flow rate of liquids, gases and steam in commercial, industrial and municipal applications.

Features: High accuracy. No moving parts. Ability to compute and output energy use.

ITEM DESCRIPTION Pipe size DN15 – DN200 Material body Carbon steel, stainless steel, hastelloy Flow range 0.2 – 970 m³/hr Accuracy 100:1 Operating temp range -200 to 400OC Pressure range 2 – 175 bar Outputs & Comms Analogue, pulse, HART, DCL, MODBUS Insertion/Inline Inline Fluid type Clean water Applicable liquids Water Power 4-20mA loop, 12-36 VDC, 85-240 VAC Approvals FM, FMC, ATEX, IECEx Connection type Flanged, wafer, ANSI, PN

Industry Key: ◉ Oil & Gas ◉ Industrial & Energy ◉ Medical & Science ◉ Research & Development ◉ Aerospace & Automotive ◉ Marine & Offshore ◉ Power Generation ◉ Water & Wastewater Fluid Key: ◉ Liquid ◉ Gas ◉ Steam

t. +44 (0)1722 439880

e. sales@icenta.co.uk

More products available online - www.icenta.co.uk /flow-meters

23

Water Meters & Heat Meters

Variable Area Flow Meters & Rotameters/Water Meters & Heat Meters


Water Meters & Heat Meters

Water Meters & Heat Meters Multical 602 ◉

Multical 402/403 ◉ MULTICAL® 602 is an all-purpose energy calculator for heat and cooling together with almost any kind of pulsed flow sensors and with 2 or 4 wired temperature sensor pairs.

Features: Complete range of communication modules. High power radiorouter module. Data loggers.

ITEM DESCRIPTION Pipe size N/A Material body PC, thermoplastic elastomer, ABS & glass Flow range 0.6 m³/h - 3000 m³/h Accuracy ±0.5% Operating temp range 2 to 180OC (heat) 50OC (cooling) Pressure range N/A Outputs & Comms LON, SIOX, M-Bus, zigbee, metasys, radiorouter, pulse Insertion/Inline N/A Fluid type Clean water Applicable liquids Water Power 3.6VDC ±0.1 VDC, battery 3.65VDC, D-cell lithium (optional) Approvals EN 1434:2007, prEN 1434:2009 and OIML R75:2002

Low Flow Meters

Ultraflow 54 ◉

The Multical 402/403 are compact ultrasonic meters which register the exact consumption due to its supreme measuring accuracy. The meter is maintenance-free and has a long lifetime which guarantees minimum yearly operating costs. DESCRIPTION

Pipe size

N/A

Material body

DZR Brass, stainless steel

Flow range

0.6 - 15 m³/h

Accuracy N/A

Features: Up to 16 years’ battery lifetime. Pulse outputs for energy and volume.

Operating temp range

2 to 160OC

Outputs & Comms

M-Bus, wireless M-bus, radio, pulse, KMP

Pressure range

N/A

Insertion/Inline N/A Applicable fluid

Clean water

Power

230 or 24 VAC, 2xAA cell battery or D-cell battery

Turbine Low Flow Sensor Signet 2100 PVDF ◉ A static flow sensor based on the ultrasonic measuring principle. The prime area of application is as a volume flow sensor for use with thermal heat meters

Features: Ultrasonic flow sensor. Compact design. Static meter with no moving parts.

ITEM

ITEM DESCRIPTION Pipe size DN15 - DN80 Material body Dezincification resistant brass, stainless steel, Thermoplastic Flow range 0.6m³/h - 40³/h Accuracy N/A Operating temp range 15 to 130⁰C Outputs & Comms N/A Pressure range PN16, PN25 flange Insertion/Inline Inline Fluid type Clean water Applicable Liquids Water Power Battery 3.65 VDC, D-Cell Lithium, 230 VAC +15/-30%, 48..52Hz Approvals MID-2004/22/EC, CE

A compact turbine flow sensor engineered specifically for low flow rates and small pipe diameter applications, the GF Signet 2100 provides accurate readings over the Flow ranges 0.3 - 3.8 or 3 - 38 lpm. ITEM

DESCRIPTION

Pipe size

DN15

Material body

PVDF

Flow range

0.38 - 38 l/m

Accuracy ±3%

Features: Small compact design for tightly spaced installations. Composed of highly chemical resistant materials.

Operating temp range

N/A

Outputs & Comms

N/A

Pressure range

Up to 16 bar

Insertion/Inline Inline Applicable fluid

N/A

Power

5 to 24 VDC

Approvals CE

Industry Key: ◉ Oil & Gas ◉ Industrial & Energy ◉ Medical & Science ◉ Research & Development ◉ Aerospace & Automotive ◉ Marine & Offshore ◉ Power Generation ◉ Water & Wastewater Fluid Key: ◉ Liquid ◉ Gas ◉ Steam

24

t. +44 (0)1722 439880

e. sales@icenta.co.uk

More products available online - www.icenta.co.uk /flow-meters


Low Flow Meter OVAL Flowmate ◉

Fuel Oil Low Flow Meter OVAL Keromate RN ◉ The OVAL Flowmate comprises a series of compact oval gear flow meters that offer a cost effective yet accurate and stable solution for flow measurement in low Flow ranges.

Features: Compact, lightweight flow sensors. Simple, robust construction. Built-in pulse generator for remote control.

The OVAL Keromate is a small, lightweight oval flow meter designed for monitoring fuel oil consumption. ITEM

DESCRIPTION

ITEM

DESCRIPTION

Pipe size

N/A

Pipe size

N/A

Material body

Zinc, resin

Material body

PEEK resin, special resin, stainless steel, aluminium

Flow range

0.1 - 30 l/hr

Flow range

0.09 - 500 l/hr

Accuracy ±1%

Accuracy ±1%

Operating temp range

-10 to 50OC

Operating temp range

-10 to 80OC

Pressure range

0.098MPa – 0.29MPa

Outputs & Comms

MR sensor, Reed switch (optional)

Outputs & Comms

Pulse

Pressure range

N/A

Insertion/Inline N/A

Insertion/Inline Inline Applicable fluid

N/A

Power

12 to 24VDC, 45V AC/DC

Approvals N/A Connection type

Features: Compact, lightweight flow meters. Integral LCD display. Flow range 0.1 to 10 or 0.3 to 30 L/h.

Fluid type

Fuel & oil

Applicable liquids

Kerosene, light oil, heavy oil

Power

Battery (3VDC lithium), 85 to 264VAC 50/60Hz

Approvals N/A Connection type

R¼ male

N/A

Metri IC LPS Flow Switch ◉ The chemical low-flow Flow meters of the FCH-mini-PVDF series are especially suitable for measuring low viscous (starting from 0.003 LPM) chemically aggressive liquids ITEM

DESCRIPTION

Pipe size

DN4

Material body

PVDF

Flow range

0.003 - 0.2 l/m (water)

The Metri Flow Switch series has been designed to deliver a simple, robust and reliable adjustable flow switch that provides visual and electrical alarm signals when the flow rate rises and falls past a set point.

Accuracy ±2% Operating temp range

-10 to 100OC

Outputs & Comms

N/A

Pressure range

7 bar

Insertion/Inline Inline Applicable fluid

Clean compatible liquids

Power

5-24 VDC

Approvals CE Connection type

Features: Compact, fast response visual alarm, high turndown ratio, wide temperature range.

⅛ BSP male

ITEM DESCRIPTION Pipe size DN15 – DN50 Material body Stainless steel (304), (316 optional) Flow range 05.5 - 1200 l/min Accuracy N/A Operating temp range -40OC to 350OC Pressure range Up to 100 bar available Outputs & Comms Coil only (mV), pulse/analogue, flow transmitter Insertion/Inline Inline Fluid type Liquids Applicable liquids Water, chemicals, hydrocarbons, mineral oils and alcohols Power 24 VDC Approvals ATEX, IECEx Connection type BSP, PN, ANSI, NPT, flanged, custom

Industry Key: ◉ Oil & Gas ◉ Industrial & Energy ◉ Medical & Science ◉ Research & Development ◉ Aerospace & Automotive ◉ Marine & Offshore ◉ Power Generation ◉ Water & Wastewater Fluid Key: ◉ Liquid ◉ Gas ◉ Steam

t. +44 (0)1722 439880

e. sales@icenta.co.uk

More products available online - www.icenta.co.uk /flow-meters

25

Flow Switches

Bio Tech Flow Meter ◉

Features: Chemically Resistant. Excellent mechanical properties over a broad temperature range. Excellent thermal stability.

Low Flow Meters

Low Flow Meters


Flow Switches

Flow Switches Flow Switches Flowline Thermo Flo ◉ The Thermo Flo is a general purpose flow switch offered in liquid or gas configurations for low-flow detection. It is a great choice for a diverse range of relatively clean, non-coating media in pipe or ducting.

Features: Adjustable set point with LED for flow or no-flow status indication. Solid state sensor is not damaged by over-ranging flow velocities.

ITEM DESCRIPTION Pipe size DN12 - DN63 Material body Polypropylene-Ryton Flow range N/A Accuracy N/A Operating temp range -40OC to 60OC Pressure range 0.113 – 10 bar Outputs & Comms N/A Insertion/Inline N/A Fluid type Clean water, dirty water, air Applicable liquids Chemicals Power 12 - 36VDC Approvals CE Connection type BSP, NPT

Flow Switches Flowline Thermo Flo with Compact Relay Controller ◉ Flow Switches Flowline Thermo Flo with Compact Junction Box ◉ The general purpose controller provides single channel low flow switch automation with one sensor input. The optional flash alarm brings immediate attention to flow alarm conditions.

Features: Fail-safe compact relay control of pumps and valves. Optional strobe brings immediate attention to flow alarm conditions.

ITEM DESCRIPTION Pipe size DN25 - DN63 Material body Polypropylene Flow range 0.04 to 90fps Accuracy Various Operating temp range -40 to 70OC Pressure range Up to 10 bar Outputs & Comms SPDT relay Insertion/Inline Inline Fluid type Clean water, dirty water, air Applicable liquids Chemicals Power 120 / 240 VAC, 50-60 Hz, 24 VDC @ 50 mA Approvals CE, CSA, LR 79326 Connection type BSP, NPT

Rotameter Flow Switches V 100 ◉ V-100 is a flexible range of VA meters with flow switch option from Voegtlin Instruments for gases or liquids, particularly for laboratory use and at low flow rates.

Features: Millimetric-scales or direct reading scales. Customer-specific scales. Spherical float for optimised stability.

ITEM

DESCRIPTION

Pipe size

N/A

Material body

Aluminium or stainless steel

Flow range

0.12 l/h - 1200 l/hr (gas), 0.25 l/h - 70 l/h

Accuracy

±2% to ±5%

Operating temp range

0 to 100OC

Pressure range

16 - 20 bar

Outputs & Comms

N/A

Insertion/Inline N/A Fluid type

Clean water, dirty water, air

Applicable liquids

N/A

Power N/A Approvals N/A Connection type

BSP, NPT

Industry Key: ◉ Oil & Gas ◉ Industrial & Energy ◉ Medical & Science ◉ Research & Development ◉ Aerospace & Automotive ◉ Marine & Offshore ◉ Power Generation ◉ Water & Wastewater Fluid Key: ◉ Liquid ◉ Gas ◉ Steam

26

t. +44 (0)1722 439880

e. sales@icenta.co.uk

More products available online - www.icenta.co.uk /flow-meters


Industrial Turbines FLow meters for accurate continuous volumetric measurement of liquids and gases

The Woodford Centre, Lysander Way, Old Sarum Park, Salisbury SP4 6BU

t. +44 (0)844 543 0844 e. sales@metrimeasurements.co.uk www.metrimeasurements.co.uk Metri is a Division of iCenta Controls Ltd


Displays from Fluidwell, Accurate Liquid Management Fluidwell is ISO 9001 – 2008 certified as well as ATEX, IECEx, CSA and FM certified for the development and production of Intrinsically Safe, Explosion proof and safe area products. •

Easy to install, program and use by customers’ own crew instead of expensive experts, due to the simple user interface: Menu-driven configuration matrix, no difficult abbreviations and codes

Know one, know them all! All series, all products

Complete technical and commercial documentation available

Worldwide Fluidwell and online support for all kinds of inquiries

including online and on location trainings and education,

Less hassle with customer questions that cost your valuable time

F Series F0-Series F010 F011 F012 F013 F014 F016 F018 F030 F040 F043 F050 F053 F070 F073 F074 F077 F090 F093

Flow rate indicator with very large digits Totalizer with on-screen measuring units Flow rate indicator/totalizer displays flow rate and total simultaneously Flow rate monitor/totalizer with one high/low alarm output Flow rate indicator/totalizer with pulse output Flow rate indicator/totalizer with linearization and pulse output Flow rate monitor/totalizer with linearization, pulse/alarm, and analog outputs and HART communication Batch controller with 1 stage control Temperature indicator with very large digits Temperature monitor with one high/low alarm output Pressure indicator with very large digits with on-screen measuring units. Pressure monitor with one high/low alarm output Level indicator with very large digits Level monitor with one high/low alarm output Level / pump controller with one control output Level monitor with linearization and one high/low alarm output General purpose indicator input loop powered with very large digits Tachometer monitor displays engine speed and running hours with alarm output

F1-Series F110 F111 F112 F113

Flow rate indicator/totalizer with analog and pulse outputs Dual input flow rate indicator/totalizer with two pulse outputs Flow rate indicator/totalizer with linearization, analog and pulse outputs Flow rate monitor/totalizer with high/low alarms, analog and pulse outputs

F114 F115 F116 F117 F118 F120 F124 F126-EL F126-EG F127 F130 F131 F132 F133 F136 F141 F143 F151 F153 F170 F173 F193 F195 F197

Ratio monitor/totalizer with high/low alarms and analog outputs Bi-directional flow rate indicator/totalizer with analog, pulse signal and flow direction outputs Differential/sum flow computer with analog and pulse outputs Totalizer monitor with high/low totalizer alarms and analog output Flow rate monitor/totalizer with linearization, high/low alarms, analog and pulse outputs Flow rate controller with analog control output and high/low alarms Ratio controller with analog control output and high/low alarms Flow computer with temperature compensation for corrected liquid volume Flow computer with temperature and pressure compensation for corrected gas volume Differential flow computer with temperature compensation for corrected liquid volume Batch controller with 2 stage control and pulse output Batch controller with 2 stage control, pulse output and analog output in relation to the flow rate Batch controller with 2 stage control and receipt printer driver Delivery controller/Dispenser with pump start and valve control Batch controller with 2 stage control, pulse output and analog output in relation to the course of the batch process Dual input temperature indicator with separate engineering units for each input Temperature monitor with high/low alarms and analog outputs Dual input pressure indicator with separate engineering units for each input Pressure monitor with high/low alarms and analog outputs Level monitor with high/low alarms and analog outputs Level monitor with linearization, high/low alarms and analog outputs Modbus display with alarms, control and analog outputs Valve Position Indicator VPI for hydraulic systems Set-point generator with temperature input, alarms and analog outputs

Field mounted indicators 28

t. +44 (0)1722 439880

e. sales@icenta.co.uk

t. +44 (0)1722 439880

e. sales@icenta.co.uk

More products available online - www.icenta.co.uk /flow-meters


D Series

E Series

F Series

The D-Series is available as DIN panel mount indicator, transmitter, controller and monitoring system for flow, level, pressure and temperature measurement applications in industrial environments. The D-Series is the better alternative for your existing, not waterproof, front panel mount indicators.

The E-Series provides a range of user-friendly indicators, transmitters, totalizers and monitoring systems designed to be used in harsh and difficult hazardous area applications. It is beyond being explosion proof. Its sturdy design and ease of use are unequaled by any other explosion proof indicator in the market!

The D-Series is supplied in a unique, robust IP66, IP67 (Type4X) panel mount front enclosure made of die cast aluminum, based on a popular DIN sized enclosure with a 144 x 72mm front. The enclosure withstands powerful water jets and even total immersion. Fluidwell is your first and best choice for high performance standard products and solutions!

The E-series is distinguished by its high quality manufacturing and its functionality driven European design. It is more than fulfilling the rules for explosion proof design, it is about safety during daily operation. Often, the environment is much tougher than the explosion proof requirements demand. Immediate danger arises in case of a broken enclosure or a poorly made flame path.

The F-Series product range offers you an extensive selection of indicators, controllers and monitoring systems for liquid and gas flow applications as well as for level, pressure and temperature measurement. Exceptional functionality in a well designed sturdy industrial enclosure has ensured that the F-Series has become a very popular range of local indicators, controllers and signal transmitters.

Panel mounted indicators

Explosion proof indicators

t. +44 (0)1722 439880

e. sales@icenta.co.uk

More products available online - www.icenta.co.uk /flow-meters

The F-Series has been developed for typical industrial environments. It is rugged and weather-proof through its coated aluminum IP67 / NEMA 4X field enclosure. More cost effective, but industrial, the GRP enclosure offers the same ingress protection rating and is ideal for salty atmospheres. The enclosures can be mounted directly onto sensors, walls or pipes but are also suitable for panel mount applications with one major advantage: it requires minimal depth clearance.

Safe and hazardous area indicators 29


Flow Meter Selection Guide: Choosing the Correct Flow Meter Numerous principles of operation and design variations together with the consideration of installation parameters, location and the economies of operation can make it a daunting task when choosing the right flow meter. If you don’t know the difference between vortex flow, Magflow or mass flow technologies then you’re probably not going to make the right choice when it comes to selecting a flow meter. iCenta is a UK flow meter specialist supplying some of the leading names in liquid, gas & vapour flow measurement with clients both large and small. To help you take the guesswork out of choosing a flow meter, please refer to the table or get in touch with our technical sales team on +44 (0)1722 439880 or sales@icenta.co.uk www.icenta.co.uk/knowledge-base/flow-selection-guide/

Liquids

Gear Flow

Clean

Turbine Magnetic Coriolis Thermal Vortex Paddle Wheel Ultrasonic Variable Area / Flow Flow* Mass Mass Flow Flow Flow Rotameter

yes

yes

yes

yes

no

yes

yes

yes

yes

Dirty

no

no

yes

yes

no

yes

special design

yes

yes

Conductive

yes

yes

yes

yes

no

yes

yes

yes

yes

Viscous

yes, >10 yes (special yes yes no no yes yes yes (special centistokes (cst) calibration) calibration)

Slurries

no

limited

yes

yes

no

yes

no

yes (Doppler)

no

Corrosive

yes

yes

yes

yes

no

yes

yes

yes

yes

Reverse flow

yes

yes

yes

yes

no

no

yes

yes

no

Pulsating flow

yes

yes

yes

yes

no

yes

yes

yes

yes

Semi filled pipes

no

no

no

no

no

no

no

yes

no

Open channel

no

no

no

no

no

no

no

yes

no

Gases

Gear Flow

Turbine Magnetic Coriolis Thermal Vortex Paddle Wheel Ultrasonic Variable Area / Flow Flow* Mass Mass Flow Flow Flow Rotameter

Steam

no

yes

no

yes

no

yes

no

yes

yes

Clean

yes

yes

no

yes

yes

yes

no

yes

yes

Wet

yes

yes

no

yes

no

yes

no

yes

yes

Contaminated

no

no

no

yes

no

yes

no

yes

no

Corrosive

no

yes

no

yes

no

yes

no

yes

yes

Technical Data

Gear Flow

Turbine Magnetic Coriolis Thermal Vortex Paddle Wheel Ultrasonic Variable Area / Flow Flow* Mass Mass Flow Flow Flow Rotameter

Accuracy

0.1-0.5% of reading

0.25-1% of reading

0.5-0.15% 0.05-0.15% of reading of reading

Repeatability ±

0.1% of reading

0.1% of reading

0.1% 0.05-0.10% 0.5% of reading of reading full scale

Max pressure Bar

270 and up

350 and up 350 and up 85 and up 40 and up 50 and up 100 and up

unlimited

15 and up

Max temp °C

125 and up

300 and up 150 and up 200 and up 100 and up

Pressure drop

medium

Turndown ratio Average cost

25:1 Medium

medium virtually none 10:1 Medium

1.5% full scale

low

low

100:1

50:1

High

Medium

Medium

1% of reading

1% (linearity)

typically 1.5% of reading

0.2% of reading

2-4% full scale 0.25% full scale

400

100 and up

100 and up

300 and up

low

virtually none

none

medium

< 10:1 Medium

Low

Medium

10:1 Low

* liquid must be electrically conductive

30

t. +44 (0)1722 439880

e. sales@icenta.co.uk

More products available online - www.icenta.co.uk /flow-meters


Specialists in precision flow meters, level sensors, instrumentation & control.


iCenta Controls Limited - The UKâ&#x20AC;&#x2122;s Independent Flow And Level Specialists Unit 3, The Woodford Centre, Old Sarum Park, Lysander Way, Salisbury SP4 6BU, UK.

t. +44 (0)1722 439880

e. sales@icenta.co.uk

Certificate Number 5364

FPB 2016/v1

www.icenta.co.uk


iCenta Controls Flow Brochure