Issuu on Google+

Citrix 1Y0-A26 Citrix XenServer 6.0 Administration http://www.test4certification.com/1Y0-A26.html

Total Question

06

Get Complete Collection of Citrix Exam's PDF.

1


Question: 1 Scenario: An administrator is moving a XenServer host from the New York datacenter to the London datacenter. During the installation of XenServer, the default NTP settings were selected. How must the administrator ensure that the XenServer host has the correct time settings? A. Configure the time in the host BIOS. B. Configure the time zone in the ntp.conf file. C. Change the time zone using the xsconsole. D. Change the NTP servers to the London NTP servers.

Answer: C Question: 2 When starting up a XenServer from SAN, the BIOS of the _______ contains the instructions that enable the host to find the boot disk. (Choose option to complete the sentence.) A. host machine B. array controller C. host bus adapter D. network interface card

Answer: B Question: 3 Scenario: An administrator notices a duplex mismatch on the network interface card (NIC) which is configured as the management interface. The administrator realizes that the switch was set to 100 full, but XenServer auto-configured the NIC in the future? A. Change the NIC properties in the xsconsole. B. Use the xe pif-configure-ip command to disable auto-configuration. C. Use the xe pif-param-set command to set other-config-ethtool-autoneg=off. D. Assign a new NIC to the management interface within the XenCenter Network tab.

Answer: A

Get Complete Collection of Citrix Exam's PDF.

2


Question: 4 Scenario: To improve performance and increase security, a network team will be moving all XenServer hosts into a more secure, and high resiliency subnet. The administrator must now change the subnet mask on all XenServer hosts to match the new network 172.16.0.0/16. Which command will the administrator need to execute on each host? A. xe pif-reconfigure-ip uuid= mode=dhcp netmask=255.255.0.0 B. xe pif-reconfigure-ip uuid= mode=static netmask=255.255.0.0 C. xe pif-reconfigure-ip uuid= mode=dhcp netmask=172.16.0.0/16 D. xe pif-reconfigure-ip uuid= mode=static netmask=172.16.0.0/16

Answer: B Question: 5 Scenario: In an environment with high available enabled, an administrator discovered that a host is unreachable in a XenServer pool. The administrator disabled high availability in order to make the host reachable. Which xe CLI command can the administrator run to make the host reachable again? A. host-disable B. host-evacuate C. pool-designate-new-master D. pool-emergency-reset-mask

Answer: B Question: 6 An administrator needs to run commands to specify ___________ to configure email alerts at the host level. (Choose option to complete the sentence.) A. alarm_priority on the host B. alarm_priority on the virtual machine C. the sender email address and SMTP server D. the recipient email address and SMTP server

Answer: D

Get Complete Collection of Citrix Exam's PDF.

3


Thank You for Using Our Product

Citrix 1Y0-A26 Citrix XenServer 6.0 Administration http://www.test4certification.com/1Y0-A26.html

Test4certification provide latest certification material only.

Microsoft MCSE

Cisco

IBM

CCNA

MCSA 2003

CCVP

70-620 70-680

642-427 642-642

IBM Mastery 00M-646 00M-245 IBM Lotus 000-M64 000-M48 IBM Tivoli software 000-560 000-033 IBM Cloud Computing 000-032 000-280 IBM Storage 000-203 000-957

MCAS

CCDA

77-884 77-602

640-863 640-864

IBM WebSphere

70-281 70-282

640-760 640-816

MCTS

CCNP

70-664 70-672

642-812 642-825

MCITP

CCDP

70-667 70-642

642-902 642-874

MBS

CCSP

MB6-872 MB2-876

642-627 642-545

000-172 000-216

HP

Apple

HP APC

ACMT

HP0-J47 HP0-S29

9L0-063 9L0-010

HP ASP

Mac OS X

HP3-C15 HP2-B44

9L0-407 9L0-510

HP ASC HP2-E34 HP2-K22

ACTC 9L0-062 9L0-624

HP Specialist

ACSP

HP3-X01 HP2-E44

9L0-402 9L0-410

Master ASE

ACMA

HP0-J44 HP0-M24

9L0-827 9L0-619

HP Sales HP2-E43 HP2-Z14

Get Complete Collection of Citrix Exam's PDF.

Logic Pro 9 9L0-837 9L0-839

4


1Y0-A26 test4certification.com