Page 1

Why Torque Transducer Standardization is Essential for Machinery Maintenance?

In order to do proper maintenance of machinery, it is necessary to have calibrated and maintained builtin instruments. One of the instruments that actually need to display high-performance measurements constantly is Torque Transducer or sensor. The transducer is used to determine the torque and performance of the engine by converting the mechanical input to electric output. Accuracy in this device is a must to control the risk of the performance of the machinery.

TYPES OF TORQUE TRANSDUCERS There are two types of torque transducers that are used to measure static and dynamic torque of the engine.

REACTION TORQUE TRANSDUCERS A reaction torque transducer is a rotating force applied to a static load source. When the transducer turns, power is being engrossed. During the revolution, torque is observed when the static load is held stable. These transducers cannot revolve 360° and do not have any bearing or slip ring.

ROTARY TORQUE TRANSDUCERS The working of a rotary torque transducer is somehow similar to a reaction torque transducer, but a


rotary torque transducer can revolve 360°. That’s why Rotary Torque Sensor requires to be aligned in series and need a mode for the conveying signal by the use of slip rings or telemetry.

WHY TORQUE TRANSDUCERS NEED TO BE STANDARDIZED REGULARLY? ACCURACY If a torque transducer is exactly standardized, you can trust the torque measurements during machinery or engine maintenance and testing. Engine torque affects the whole control and movement of the machinery. Therefore the observations noted by the technicians during testing or maintenance must be precise every time.

PERFORMANCE An engine is one of the most important parts of machinery without which machinery cannot even able to work. Therefore, the engine must always serve its maximum performance. By standardizing a torque transducer regularly, you can definitely observe superiority in its performance. If a torque transducer can precisely and exactly interpret the measurement of an engine accurately, the engine's performance can be calculated by doing correct calculations.

SAFETY The performance of an engine is very important, but if the measurements recorded and the evaluation of the performance is approximated, the engine will not work properly, and it may also hinder the other parts of the machinery. These disastrous conditions are objectionable and can be totally avoided if by calibrating the torque transducer correctly up to the mark.


Therefore, by regulating a torque transducer regularly, you can ensure easier maintenance of your machines and smooth operations with accuracy, value performance, and on the whole safety. If you are searching for a competent retailer for buying electronic devices for your engines and machinery, Datum Electronics presents an array of Torque Sensors, transducers, meters, and Shaft Power Meter, etc. Explore the website for more details!

Profile for Datum Eelectronics

Why Torque Transducer Standardization is Essential for Machinery Maintenance?  

In order to do proper maintenance of machinery, it is necessary to have calibrated and maintained built-in instruments. One of the instrumen...

Why Torque Transducer Standardization is Essential for Machinery Maintenance?  

In order to do proper maintenance of machinery, it is necessary to have calibrated and maintained built-in instruments. One of the instrumen...

Advertisement