Issuu on Google+


CONTINUING CLASSIC INNOVATIONS IN CAR AUDIO Celebrating over 30 years in the 12 Volt industry, Alphasonik is the original developer of ground-breaking technologies such as high voltage signal transfer and amplifier fan cooling, which remain a benchmark in high-end audio. The spirit of Alphasonik has brought to market an audio line of high quality, proven performance products showcased through exceptional cosmetics. Alphasonik amplifiers, signal processors, subwoofers, enclosures, components, tweeters, full range speakers and audio accessories have given the car audio industry a new sound. Through innovative design and performance, Alphasonik has no equal.

ALPHASONIK’S MISSION STATEMENT

It is Alphasonik’s mission to provide our customers

superior and innovative products combined with

exceptional service, establishing a long term

profitable relationship.


PMA SERIES CLASS D MONO BLOCK AMPLIFIERS

Employing Class D topology, these Alphasonik amplifiers keep cool and run more efficiently to achieve low frequency reproduction, delivering high output performance into 1-ohm loads and

HOUR METER

Never before has a mobile audio product incorporated a method to log the actual time of use. The tamper-proof aviationgrade Hobbs-type Hour Meter is a highly accurate mechanical counter driven by a dedicated analog clock circuit. This feature lets you accurately measure your system’s performance and push it to the limit. The Hour Meter is featured on all PMA Series Amps.

configure multiple speakers to reach a greater output.

PMA1200DE

Model shown

PMA1200DE

1-CHANNEL CLASS D MONO BLOCK AMPLIFIER

AMPLIFIER FEATURES •

• • •

INTERFACE

TERMINALS

Class D Circuitry – This technology produces a more stable and efficient power output. Without wasting excess power that turns into heat, Class D Circuitry produces less energy loss, requiring a smaller heat sink and making the entire amplifier smaller. 1-ohm Stable – All PMA Class D and HCE Series Amplifiers are 1-ohm stable, meaning they allow for the use of low impedance speakers while still delivering high amounts of power. Linkable Amplifiers – Having the ability to link two of the same amplifiers together, combining both output channels into one. This gives way to double the efficiency. Tiffany-Style RCA Jacks – Unlike other RCA jacks, these are made of only one piece and are hard-mounted directly to the amp’s chassis, eliminating broken, pulled-off or pushed-in RCA plugs.

Remote Bass Boost Control

4-way Protection Circuitry

Remote Digital Volt Meter

Beveled Clear Acrylic Protective Cover

Hour Meter

Parallel Line-Out RCA Jacks

Solid Brass Nickel-Plated Terminal Blocks

MOSFET High-Speed Switching

Cooling Fan(s)

1300 Watts x 1 @ 4Ω Mono 2000 Watts x 1 @ 2Ω Mono 2400 Watts x 1 @ 1Ω Mono Dimensions (W x H x L): 9 1/8 x 2 1/2 x 20 7/8” (232 x 64 x 530mm)

PMA1000DE

1-CHANNEL CLASS D MONO BLOCK AMPLIFIER 1000 Watts x 1 @ 4Ω Mono 1500 Watts x 1 @ 2Ω Mono 2060 Watts x 1 @ 1Ω Mono Dimensions (W x H x L): 9 1/8 x 2 1/2 x 17 3/4” (232 x 64 x 451mm)

Power Supply

PMA6BE

REMOTE BASS BOOST CONTROL

The PMA6BE gives you the power to control your system’s bass equalization from the convenience of the driver’s seat. This backlit control knob adjusts the amplifier’s bass level. It’s standard with all Class D Amps.

PMA100VE

REMOTE DIGITAL VOLT METER

The PMA100VE gives true, real-time monitoring of the system’s amplifier voltage. It lets you know if your charging system is supplying enough voltage to meet your musical needs. A 16-foot cord is included, allowing you to mount this volt meter in the trunk, passenger cabin or on your dash. The PMA100VE is included with all PMA Series Amps.

1


PMA SERIES HIGH CURRENT AMPLIFIERS

This series of amplifiers is specifically designed to deliver 1-ohm mono loads, ideal for powering multiple voice coils in parallel or for running 4-ohm loads where maximum dampening and minimum distortion is desired.

HOUR METER

The Hour Meter is featured on all PMA Series Amps

Also included are the Remote Bass Boost Control and Digital Volt Meter. PMA1000HCE

Model shown

PMA1000HCE

2-CHANNEL HIGH CURRENT AMPLIFIER

AMPLIFIER FEATURES •

Solid Brass Nickel-Plated Terminal Blocks – This feature allows for better conduction of electricity and improved current flow. Using this type of metal also protects against corrosion.

Remote Bass Boost Control – Install this remote knob anywhere and adjust the low-end frequencies on the fly.

Remote Digital Volt Meter – This meter ensures that the amplifier maintains the proper amount of voltage during operation.

Cooling Fan(s) – To ensure smooth and efficient operation, special cooling fans improve heat dissipation to keep the amplifier’s temperature at a suitable level.

Bridgeable

Tiffany-Style RCA Jacks

Bass Boost

1-ohm Stable

4-way Protection Circuitry

Hour Meter

Beveled Clear Acrylic Protective Cover

Onboard Crossover

Parallel Line-Out RCA Jacks

Subsonic Filter

MOSFET High-Speed Switching Power Supply

500 Watts x 2 @ 4Ω Stereo 900 Watts x 2 @ 2Ω Stereo 1500 Watts x 2 @ 1Ω Stereo 1575 Watts x 1 @ 4Ω Mono 2500 Watts x 1 @ 2Ω Mono 3000 Watts x 1 @ 1Ω Mono Dimensions (W x H x L): 9 1/16 x 2 5/8 x 26” (230 x 67 x 660mm)

PMA600HCE

2-CHANNEL HIGH CURRENT AMPLIFIER 300 Watts x 2 @ 4Ω Stereo 550 Watts x 2 @ 2Ω Stereo 900 Watts x 2 @ 1Ω Stereo 950 Watts x 1 @ 4Ω Mono 1550 Watts x 1 @ 2Ω Mono 1800 Watts x 1 @ 1Ω Mono Dimensions (W x H x L): 9 1/16 x 2 5/8 x 19 3/4” (230 x 67 x 502mm)

PMA640HCE

4-CHANNEL HIGH CURRENT AMPLIFIER INTERFACE

TERMINALS

PMA10BE

REMOTE BASS BOOST CONTROL (Included)

2

PMA100VE

REMOTE DIGITAL VOLT METER (Included)

160 Watts x 4 @ 4Ω Stereo 290 Watts x 4 @ 2Ω Stereo 480 Watts x 4 @ 1Ω Stereo 500 Watts x 2 @ 4Ω Mono 825 Watts x 2 @ 2Ω Mono 960 Watts x 2 @ 1Ω Mono Dimensions (W x H x L): 9 1/16 x 2 5/8 x 19 3/4” (230 x 67 x 502mm)


PM SERIES

CLASS A/B BI-POLAR POWER AMPLIFIERS Alphasonik’s PM Series Amplifiers give novice enthusiasts various options for delivering ample power. Distortion is reduced thanks to Darlington topology bi-polar output transistors. These amplifiers run cool and efficiently to power just about any configuration of subwoofers and speakers.

PM12005E

Model shown

AMPLIFIER FEATURES •

• •

Hi- and Low-Level Inputs – Using the speaker wires from any head unit, you can pass audio signals to the amplifier by converting the speaker level output into a low-level signal using the included wire harness. 4-Way Protection Circuitry – Thermal, Short Circuit, Overload & DC Offset Onboard Crossover – This gives you the capability to filter out desired frequencies for particular speakers for increased sonic accuracy.

Bridgeable

Remote Bass Boost Control (optional)

Tiffany-Style RCA Jacks

Solid Brass Nickel-Plated Terminal Blocks

Heavy-Duty One-Piece Extruded Aluminum Heat Sink

PM12005E

PM6002E

75 Watts x 4 @ 4Ω Stereo & 200 Watts x 1 @ 4Ω Mono 120 Watts x 4 @ 2Ω Stereo & 320 Watts x 1 @ 2Ω Mono 185 Watts x 2 @ 4Ω Mono & 320 Watts x 1 @ 2Ω Mono Dimensions (W x H x L): 9 1/4 x 2 x 19” (235 x 51 x 483mm)

150 Watts x 2 @ 4Ω Stereo 240 Watts x 2 @ 2Ω Stereo 480 Watts x 1 @ 4Ω Mono Dimensions (W x H x L): 9 1/4 x 2 x 11 7/8” (235 x 51 x 302mm)

PM6004E

PM3002E

75 Watts x 4 @ 4Ω Stereo 120 Watts x 4 @ 2Ω Stereo 240 Watts x 2 @ 4Ω Mono Dimensions (W x H x L): 9 1/4 x 2 x 12 5/8” (235 x 51 x 321mm)

100 Watts x 2 @ 4Ω Stereo 150 Watts x 2 @ 2Ω Stereo 300 Watts x 1 @ 4Ω Mono Dimensions (W x H x L): 9 1/4 x 2 x 8 1/8” (235 x 51 x 206mm)

5-CHANNEL CLASS A/B BI-POLAR AMPLIFIER

4-CHANNEL CLASS A/B BI-POLAR AMPLIFIER

2-CHANNEL CLASS A/B BI-POLAR AMPLIFIER

2-CHANNEL CLASS A/B BI-POLAR AMP

PM1600DE

INTERFACE

CLASS D MONO BLOCK AMP TERMINALS

PMA10BE

REMOTE BASS BOOST CONTROL (Optional)

PMA100VE

REMOTE DIGITAL VOLT METER (Optional)

300 Watts x 1 @ 4Ω Mono 600 Watts x 1 @ 2Ω Mono Dimensions (W x H x L): 9 1/4 x 2 x 6 1/2” (235 x 51 x 165mm)

3


800SERIES

ALPHA 800 SERIES DUAL 4-ohm SUBWOOFERS It’s no surprise that the 800 Series is one of Alphasonik’s most popular subwoofers. Featuring the taller, narrower J-surround and a special ring which conceals the mounting screws, these woofers are offered in dual 4-ohm, allowing you more flexibility in installation.

SUBWOOFER FEATURES •

Cast Aluminum CNC Machine Finished Alpha Basket

Motor Assembly Heat Sink

Kevlar® -Reinforced Cone

TLTF J-Surround

High Tinsel Strength Two-Layer Surround

Exclusive Mounting Ring

Flat Progressive Rate Nomex® Damper w/ Spiral-Woven Leads

8-gauge Lug-Lock Input & Output Terminals

PSW810E

10” ALPHA 800 SERIES SUBWOOFER Rated at 800 Watts RMS 89dB Efficiency Frequency Response of 29Hz to 500Hz 135 oz. Double-Stacked Magnet Dual 4-ohm 2-1/2” Voice Coils Mounting Dimensions: Depth: 6 1/8” (156mm) Through Hole: 8 7/8” (225mm) Diameter: 10 3/16” (259mm)

TLTF SURROUND

Subwoofers feature a massive 2-layer, high-travel surround for reliability and control at maximum excursion. The 800 Series, featuring our new TLTF J-Surround, is designed for increased cone surface area without sacrificing low frequency response.

psw810E

Model shown US PATENT #6,601,645 B1 US PATENT #6,656,000 B2 US PATENT #D478,556 S

PSW812E

12” ALPHA 800 SERIES SUBWOOFER Rated at 900 Watts RMS 92dB Efficiency Frequency Response of 28Hz to 500Hz 135 oz. Double-Stacked Magnet Dual 4-ohm 2-1/2” Voice Coils Mounting Dimensions: Depth: 6 5/8” (168mm) Through Hole: 10 7/8” (276mm) Diameter: 12 5/16” (313mm)

PSW815E

15” ALPHA 800 SERIES SUBWOOFER Rated at 1000 Watts RMS 94dB Efficiency Frequency Response of 24Hz to 500Hz 150 oz. Double-Stacked Magnet Dual 4-ohm 3” Voice Coils Mounting Dimensions: Depth: 8” (203mm) Through Hole: 13 7/8” (352mm) Diameter: 15 1/16” (383mm)

4


600SERIES CAST ALUMINUM SUBWOOFERS

Increased control is what results from Alphasonik’s combination of technology in the 600 Series. These woofers are designed for competition and work best in smaller sealed enclosures and moderately-sized ported enclosures.

SUBWOOFER FEATURES •

Cast Aluminum CNC Machine Finished Alpha Basket

Motor Assembly Heat Sink

Kevlar ®-Reinforced Cone

TLTF J-Surround

High Tinsel Strength Two-Layer Surround

Exclusive Mounting Ring

8-gauge Lug-Lock Input & Output Terminals

BASKET WEAVE, KEVLAR® REINFORCED KRAFT PULP CONE All Alphasonik 600 Series subwoofers use our environmentally treated Kevlar ® reinforced, kraft pulp cone – the most neutral sounding material in the industry. Virgin, long-fiber kraft pulp is air-cured and strengthened with Kevlar ®.

psw610E

Model shown US PATENT #6,601,645 B1 US PATENT #6,656,000 B2 US PATENT #D478,556 S

PSW610E

10” ALPHA 600 SERIES SUBWOOFER Rated at 600 Watts RMS 87dB Efficiency Frequency Response of 33Hz to 500Hz 75 oz. Double-Stacked Magnet Dual 4-ohm 2” Voice Coils Mounting Dimensions: Depth: 6” (152.4mm) Through Hole: 8 7/8” (225mm) Diameter: 10 3/16” (259mm)

PSW612E

12” ALPHA 600 SERIES SUBWOOFER Rated at 700 Watts RMS 88dB Efficiency Frequency Response of 30Hz to 500Hz 75 oz. Double-Stacked Magnet Dual 4-ohm 2-1/2” Voice Coils Mounting Dimensions: Depth: 6 1/2” (165mm) Through Hole: 10 7/8” (276mm) Diameter: 12 5/16” (313mm)

5


400SERIES STAMPED STEEL DUAL 4-ohm SUBWOOFERS

This series is the finest of Alphasonik’s stamped steel basket subwoofers. With a larger motor structure and magnet, these woofers offer increased power handling. Additionally, Alphasonik’s gasket gives installers creative alternatives. The gasket conceals the mounting screws, giving the front face of the woofer a refined black look. The 400 Series also employs the latest technology in mineral-filled polymers for musical neutrality. The inverted dome geometry can handle tremendous stress without deformation.

PSW410E

10” ALPHA 400 SERIES SUBWOOFER Rated at 400 Watts RMS 90dB Efficiency Frequency Response of 30Hz to 500Hz 46 oz. Strontium Magnet Dual 4-ohm 2” Voice Coils Mounting Dimensions: Depth: 5 1/2” (140mm) Through Hole: 9 3/8” (238mm) Diameter: 10 15/16” (278mm)

PSW412E

12” ALPHA 400 SERIES SUBWOOFER psw410E

Model shown US PATENT #6,601,645 B1 US PATENT #D478,556 S

SUBWOOFER FEATURES

6

Stamped Steel Polished w/ Brushed Hairline Finish Alpha Basket

Motor Assembly Heat Sink

High Rigidity Inverted Dome

Mineral-Filled Composite Cone

EPDM Surround

High Tinsel Strength Two-Layer Surround

Exclusive Mounting Ring

8-gauge Lug-Lock Input Terminals

Rated at 500 Watts RMS 91dB Efficiency Frequency Response of 25Hz to 500Hz 46 oz. Strontium Magnet Dual 4-ohm 2” Voice Coils Mounting Dimensions: Depth: 6” (152mm) Through Hole: 11 1/8” (283mm) Diameter: 12 7/8” (327mm)


300 SERIES LOW PROFILE SUBWOOFERS

With the Alphasonik 300 Series Shallow Woofer you can achieve an extreme amount of bass with minimal space. Featuring a Spun Aluminum cone, 8-gauge lug-lock terminals, for maximum performance and a mounting depth of only 3.5 inches. These woofers work best for those small areas in your vehicles and can fit any enthusiast life style.

psw310X

Model shown US PATENT #6,601,645 B1 US PATENT #D478,556 S

PSW310X

10” ALPHA 300 SERIES SUBWOOFER

SUBWOOFER FEATURES •

Low profile design, Mounting depth of 3.5”

High strength glass fiber enhanced surround

Spun aluminum inverted cone

Powder coated stamped steel basket

Platinum plated 8-gauge Lug-Lock terminals

Rated at 400 Watts RMS 89.7dB Efficiency Frequency Response: 28Hz to 500Hz 46oz. Strontium Magnet Dual 4-ohm 2” Voice Coils Mounting Dimensions: Depth: 3 1/2” (89mm) Through Hole: 9 3/5” (244mm) Diameter: 10.2/5” (264mm)

PSW312X

12” ALPHA 300 SERIES SUBWOOFER Rated at 500 Watts RMS 89.2dB Efficiency Frequency Response: 24Hz to 500Hz 46oz. Strontium Magnet Dual 4-ohm 2” Voice Coils Mounting Dimensions: Depth: 3.5/8” (89mm) Through Hole: 11.5/8” (321mm) Diameter: 12 5/8” (321mm)

7


100 SERIES

ALPHA 100 SERIES DUAL 4-ohm SUBWOOFERS You can achieve natural sound in sealed, ported and bandpass enclosures with Alphasonik’s 100 Series Stamped Subwoofers. Featuring laminated, non-pressed paper cone and 8-gauge lug-lock terminals, this family of woofers stands above other contenders.

SUBWOOFER FEATURES

PSW110E

Stamped Steel Polished w/ Brushed Hairline Finish Alpha Basket

Motor Assembly Heat Sink

Laminated Non-Pressed Pulp Paper Cone

U.V. Treated Pressure-Molded Foam Surround

High Tinsel Strength Two-Layer Surround

Exclusive Mounting Ring

8-gauge Lug-Lock Input Terminals

10” ALPHA 100 SERIES SUBWOOFER Rated at 200 Watts RMS 89dB Efficency Frequency Response of 30Hz to 500Hz Dual 4-ohm 1 1/2” Voice Coils Mounting Dimensions: Depth: 4 3/4” (121mm) Through Hole: 9 1/8” (232mm) Diameter: 10 1/4” (260mm)

PSW112E

12” ALPHA 100 SERIES SUBWOOFER psw110E

Model shown US PATENT #6,601,645 B1 US PATENT #D478,556 S

Rated at 230 Watts RMS 93dB Efficency Frequency Response of 30Hz to 500Hz Dual 4-ohm 1 1/2” Voice Coils Mounting Dimensions: Depth: 5 1/8” (130mm) Through Hole: 11 1/4” (286mm) Diameter: 12 1/2” (318mm)

PSW115E

15” ALPHA 100 SERIES SUBWOOFER Rated at 400 Watts RMS 93dB Efficiency Frequency Response of 30Hz to 500Hz Dual 4-ohm 2” Voice Coils Mounting Dimensions: Depth: 6 5/8” (168mm) Through Hole: 13 13/16” (351mm) Diameter: 15 1/4” (387mm)

8


ALPHASERIES COMPONENT SPEAKER SYSTEMS

Since every installation is different, Alphasonik’s notorious component systems cater to the many unique sizes of today’s vehicles. No matter the configuration, any system can achieve precision sound with accurate response.

COMPONENT FEATURES •

Polypropylene-Injected Cone

Butyl Rubber Surround

2-Layer Hi-Temp ASV Voice Coil

Oversized Poly-Woven Damper

Proprietary Heavy-Gauge Coated Steel Frame

Proprietary Rings with Jewel Cut Back Badge 0

360 Swivel Tweeter Design

1 Pair Tweeter Surface Mount

1 Pair 12dB/Octave Crossover Networks

Housings

4-ohm Impedance

1 Pair Tweeter Flush Mount

Complete Mounting Hardware with

Housings

Grilles and Templates

US PATENT #6,601,645 B1

Pcz65E

6.5” 2-WAY COMPONENT SPEAKER SYSTEM

Power Handling: 120 Watts RMS Frequency Response: 35Hz – 25kHz, +/-3dB Sensitivity: 90dB 1w/1m Mounting Depth: 2-1/2” / 64mm (woofer) Mounting Depth: 1” / 25mm (flush mount tweeter)

Pcz50E

5.25” 2-WAY COMPONENT SPEAKER SYSTEM

Power Handling: 100 Watts RMS Frequency Response: 35Hz – 25kHz, +/-3dB Sensitivity: 90dB 1w/1m Mounting Depth: 2-1/8” / 54mm (woofer) Mounting Depth: 1” / 25mm (flush mount tweeter)

PcT6801

6 x 8” COMPONENT 2-WAY SYSTEM 6 x 8” Component Mid-Bass w/ Carbon Reinforced Woven Glass Cone 19mm Silk Dome Tweeter 2-Way Component Crossover Power Handling: 200 Watts RMS Frequency Response: 42Hz – 22kHz, +/-3dB Sensitivity: 92dB 1w/1m Mounting Depth: 2-1/2” (woofer) Mounting Depth: 3/4” (flush mount tweeter)

9


ALPHA SERIES FULL RANGE SPEAKERS

Full range speakers harmonize with your subwoofers and other component speakers to deliver a clean and precise sound. Alphasonik’s Full Range Speakers provide the most accurate sound reproduction over a wide spectrum.

SPEAKER FEATURES •

Black Anodized Aluminum

Titanium Vapor-Deposition Cone/

Integrated Crossover with Solid-

360° Swivel Tweeter (except in

Oversized Poly-Cotton Spider and

Proprietary High-Gauge Steel

Voice Coil Former

PFZ693)

Dome Tweeter

Bottomless Motor Geometry

State Tweeter Protection •

Polypropylene Injected Cone

Butyl Rubber Surround

Frame •

Proprietary Rings with Jewel Cut Back Badge

PFZ525E

5.25” 2-WAY FULL RANGE SYSTEM

Power Handling: 120 Watts RMS Frequency Response: 65Hz – 22kHz, +/-3dB Sensitivity: 91.5dB 1w/1m Mounting Depth: 2-1/8” (54mm)

PFZ460E

4 X 6” 2-WAY UNIVERSAL MOUNT FULL RANGE SYSTEM

Power Handling: 100 Watts RMS Frequency Response: 70Hz – 22kHz, +/-3dB Sensitivity: 91dB 1w/1m Mounting Depth: 2-1/2” (64mm)

PFZ400E

4” 2-WAY FULL RANGE SYSTEM

Power Handling: 100 Watts RMS Frequency Response: 75Hz – 22kHz, +/-3dB Sensitivity: 91dB 1w/1m Mounting Depth: 1-3/4” (44mm)

PFZ352E

3.25” 2-WAY FULL RANGE SYSTEM

Power Handling: 80 Watts RMS Frequency Response: 85Hz – 22kHz, +/-3dB Sensitivity: 90dB 1w/1m Mounting Depth: 1-3/4” (44mm)

PFZ410E

4 X 10” 2-WAY FULL RANGE SYSTEM

Black Anodized Aluminum Voice Coil Former – 25mm Titanium Vapor-Deposition Dome Tweeter – 25mm Power Handling: 120 Watts RMS Frequency Response: 70Hz – 22kHz, +/-3dB Sensitivity: 93dB 1w/1m Mounting Depth: 2-1/2” (64mm)

10


PFZ652E

6.5” 2-WAY FULL RANGE SYSTEM

Power Handling: 160 Watts RMS Frequency Response: 55Hz – 22kHz, +/-3dB Sensitivity: 92dB 1w/1m Mounting Depth: 2-1/2” (64mm)

360˚ SWIVEL TWEETER

PFZ693E

6 X 9” 3-WAY FULL RANGE SYSTEM

Titanium Vapor-Deposition Dome Tweeter – 25mm Titanium Vapor-Deposition Cone Mid – 35mm Tweeter & Midrange Non-Swivel Stationary Mount Power Handling: 240 Watts RMS Frequency Response: 46Hz – 22kHz, +/-3dB Sensitivity: 94dB 1w/1m Mounting Depth: 3-1/2” (89mm)

PFZ692E

6 X 9” 2-WAY FULL RANGE SYSTEM

Titanium Vapor-Deposition Dome Tweeter – 28mm Power Handling: 200 Watts RMS Frequency Response: 46Hz – 22kHz, +/-3dB Sensitivity: 93dB 1w/1m Mounting Depth: 3-1/2” (89mm)

PFZ680E

6 X 8”/ 5 X 7” 2-WAY FULL RANGE SYSTEM

Power Handling: 200 Watts RMS Frequency Response: 46Hz – 22kHz, +/-3dB Sensitivity: 93dB 1w/1m Mounting Depth: 2-1/2” (64mm) US PATENT #6,601,645 B1

11


AMP LIFIED VENTED BASS ENCLOSURE

Alphasonik’s PBAT10E Amplified Vented Bass Enclosure gives you the liberty to quickly add a powerful bass thrust to an existing system. With a recognizable design and durable construction, this enclosure is one of Alphasonik’s best-sellers. A remote bass boost control and wiring kit is included.

REMOTE BASS BOOST CONTROL

Backlit rotary control knob in surface mount case with 16’ modular cord included.

PBAT10E

10” AMPLIFIED VENTED BASS ENCLOSURE High Quality Construction Rear Facing Tuned Port Black Suppleather Cover MOSFET Ampliflier Remote Bass Control Knob High & Low Level Inputs Adjustable Low Pass Filter: 40Hz-250Hz Adjustable Bass Boost 0 - 18dB 10” Woofer w/ Mineral-Filled Composite Cone Bumped Back Woofer Plate Extended & Vented Pole Piece 100 Watts RMS

12


BASSSERIES ENCLOSUREs

For those looking for a quick and convenient heart-pounding upgrade, Alphasonik’s Bass Series Enclosures offer the solution. Ready to install in minutes, these boxes are built to the exact specifications of the woofer, getting the most from the amplifier and maximizing the overall efficiency. Alphasonik enclosures are crafted with your convenience in mind.

PB110LE

10” SINGLE PRE-LOADED ENCLOSURE

Single 12” Woofer with Mineral-Filled Composite Cone Power Handling: 300 Watts RMS Sensitivity: 95dB Frequency Response: 28Hz-1kHz Single Terminal w/ 4-ohm Impedance Dimensions: 16.3” x 9.8” x 12.8” (414mm x 249mm x 325mm)

pB212LE

Model shown

PB112LE

12” SINGLE PRE-LOADED ENCLOSURE

Single 12” Woofer with Mineral-Filled Composite Cone Power Handling: 400 Watts RMS Sensitivity: 96dB Frequency Response: 23Hz-1kHz Single Terminal w/ 4ohm Impedance Dimensions: 17.9” x 10.2” x 15.6” (455mm x 259mm x 396mm)

PB210LE

10” DUAL PRE-LOADED ENCLOSURE

Dual 10” Woofers with Mineral-Filled Composite Cone Power Handling: 600 Watts RMS Sensitivity: 98dB Frequency Response: 25Hz-1kHz Dual Terminals w/ 4ohm Impedance at each terminal Dimensions: 31.1” x 9.8” x 12.8” (790mm x 249mm x 325mm)

PB212LE

12” DUAL PRE-LOADED ENCLOSURE

Dual 12” Woofers with Mineral-Filled Composite Cone Power Handling: 800 Watts RMS Sensitivity: 99dB Frequency Response: 20Hz-1kHz Dual Terminals w/ 4ohm Impedance at each terminal Dimensions: 34.6” x 11” x 15.6” (879mm x 279mm x 396mm)

13


DRIVERS LR

With Alphasonik’s line of processors,

LR

RADIO

LR

AUX

LR

FRONT

LR

REAR

+1 2V R EM G N D

SIGNAL PROCESSORS

SUB

INPUT GAIN

Equalizers and Bass Drivers your systems

LR

output will sound cleaner than ever. Increase

LR

your systems voltage, improves signal-to-noise ratio, decrease standing waves and reduce the noise floor with versatile components. PEQ70E

R 30Hz - 150Hz

50Hz

125Hz

315Hz

750Hz2

.2kHz

9kHz

PLD40E

8-VOLT LINE DRIVER

R

+1

D

Independent Variable Output Level Controls Rotary Control Knobs Input Impedance: 20K Ohms Frequency Response: 10Hz – 50kHz @ 1dB Signal-to-Noise Ratio: >110dB Dimensions (W x H x L): 9” x 1” x 3” 2V

7-Band Parametric Equalizer (50Hz, 125Hz, 315Hz, 750Hz, 2.2kHz, 6kHz, 12kHz) Up to 9.75 Volts RMS Output Subwoofer Crossover Variable from 30Hz-120Hz @ 18dB/octave Master Volume Control Fader Control Subwoofer Level Control: +18dB Gain Main / AUX Input Selector On-board 30V bi-polar switching power supply Independent Left & Right AUX Input Sensitivity for Gain Matching 20dB Headroom Eliminates Signal Clipping Nickel-Plated RCA Inputs & Outputs Dimensions (W x H x D): 7 x 1 1/8 x 4 1/16”

F

PEQ70E

FREQ

SUB GAIN

N

7-BAND IN-DASH PARAMETRIC EQUALIZER

AUX ILL

EM

PEQ70E

ADER

G

GAINF

1CH

POWER

2CH 3CH

4CH

Four Channel Line Driver

PLD40E

OUTPUT 1

2

3

INPUT 4

1

2

BALANCED DIGITAL BASS CONTROL

L

PO W

S

N TR O

BA S

O C

WIDE

M

AX

ER

PBD100E

PBD100E

3.5 VOLT BASS DRIVER

14

D

2V

N

G

+1

R

EM

O N TR O C

U T TP U O

IN PU

T

L

SWEEP

Maximum input of 15V RMS Frequency Response from 10Hz-100kHz Balanced Input Noise Rejection >60dB Sweep Frequencies from 27Hz - 63Hz Total Harmonic Distortion of 0.003% Remote Mount w/ cord (Included)

3

4

12kHz


CAPS &TWEETERS Farad Capacitors

Stabilize the flow of energy to the sound system with Alphasonik’s comprehensive line of Capacitors. With a selection of various farad capacities and sleek designs, you’re sure to find the right fit.

CAPACITOR FEATURES •

Smart Electronic Top & Nickel-Plated Power Connections

24-volt Continuous / 30-volt Surge

4-Digit Digital Display

2 Orange LED Indicator Lights

Voltage Sensing Digital Display

Reverse Polarity Warning

Under/Over Voltage Warning

Voltage Display Calibration

Transparent Mounting Brackets.

PCP15LE

1.5 FARAD CAPACITOR

Dimensions: (L x W x H1 x H2) 3 1/2 x 3 1/2 x 10 1/8 x 11 1/4”

TWEETERS Alphasonik’s family of PTZ Tweeters provides you plenty of options in outfitting your system. Select the Titanium version for ultra bright and crisp highs or the Silk for a smooth and natural response. Balanced and matched outboard crossovers are included. All PTZ tweeters come with 12dB outboard crossovers and surface and flush mounting accessories.

Ptz20tE

titanium DOME TWEETER

Titanium Polymer Dome Tweeter – 20mm Surface & Flush Mount Housing 3600 Swivel Tweeter Design Separate 12dB Crossover Solid-State Tweeter Protection Power Handling: 100 Watts RMS Frequency Response: 2kHz – 22kHz, +/-3dB Sensitivity: 91.5dB 1w/1m Mounting Depth: 3/4” (flush mount tweeter)

Ptz25tE

titanium DOME TWEETER

Titanium Polymer Dome Tweeter – 25mm Surface & Flush Mount Housing 3600 Swivel Tweeter Design Separate 12dB Crossover Solid-State Tweeter Protection Power Handling: 100 Watts RMS Frequency Response: 2kHz – 22kHz, +/-3dB Sensitivity: 91.5dB 1w/1m Mounting Depth: 3/4” (flush mount tweeter)

Ptz25sE

Pure SILK DOME TWEETER

Pure Silk Dome Tweeter – 25mm Surface & Flush Mount Housing 3600 Swivel Tweeter Design Separate 12dB Crossover Solid-State Tweeter Protection Power Handling: 100 Watts RMS Frequency Response: 2kHz – 22kHz, +/-3dB Sensitivity: 91dB 1w/1m Mounting Depth: 3/4” (flush mount tweeter)

15


7050 VILLAGE DRIVE, BLDG G • BUENA PARK, CALIFORNIA 90621 714.670.8950 • FAX: 714.670.8959 • ALPHASONIKINC.COM

proud member of

Copyright 2010 Alphasonik, Inc. All rights reserved. Any unauthorized reproduction or use of any Alphasonik logos, images or design elements is strictly prohibited by law. Specifications subject to change without notice.


catalogo