Issuu on Google+

FIRE HELMETS CATALOG 2009 – 2010 Cairns Leather Helmets

Cairns Traditional Helmets

Cairns Modern Helmets

Cairns Rescue Helmets

Cairns Fronts, Cairns Fronts Order and Accessories

Eye, Face and Hearing Protection

ClearCommand HCS Communicatio System

Replacement P

Cairns Gear and

pgs 11-16

pgs 17 18, 2


Top 10 Reasons to Choose Cairns®

1

6

2

7

3

8

Impact Protection

Quality

Only Cairns offers the most complete system for absorbing an impact. The helmet shell, impact cap, tube-lock, and suspension straps work as an energy-absorbing system to protect you. The greatest testament to Cairns helmets are the countless lives saved by the “above and beyond” top-and-side impact protection and penetration resistance of the industry’s Number One helmet.

Thermal Protection Every Cairns helmet provides the extra protection of a thermal impact cap. A Cairns helmet with an impact cap is 66% cooler than a fire helmet without a thermal impact cap. So, protect an important part of your body from heat.

Eye Protection

User-Friendly Routine maintenance is easy and fast with Cairns helmets, from easy-to-remove headband liners to the use of minimal parts in helmet construction. To aid with compliance to the NFPA 1851 standard on care and maintenance of fire helmets, MSA offers a free guide to NFPA 1851 compliance for Cairns helmets, with an optional on-line certification. Visit www.MSAnet.com for all the details.

Selection

Only Cairns helmets are available with the revolutionary patent-pending Defender Visor retractable, full-coverage, close-fitting eye protection that meets both NFPA and ANSI standards. By complementing helmets with a full line of conventional faceshields and goggles, Cairns is the clear leader in firefighters’ eye and face protection.

4 5

All Cairns helmets are known for their quality from design to manufacture. For example, you can “feel” the quality of our 100% handcrafted leather helmets, the durability of our hardware, and the strength of other components used on all our fire helmets.

Shell Release System This safety system found only on Cairns helmets provides an extra margin of safety and protection for you if the helmet shell becomes lodged during firefighting.

Comfort Cairns helmets are well known for their comfort, ride, and weight distribution. You can benefit from our decades of experience resulting in a highly refined helmet with unparalleled wearability allowing you to focus on the job at hand.

Cairns offers the most complete line of fire helmets from leathers to traditional and modern styles, from thermoplastic to fiberglass and Kevlar composites. No one else can match our selection. Just ask for your favorite style.

9 10

Warranty Cairns stands behind our product with a 5-year shell replacement warranty and additional lifetime coverage on components. We lead the way with warranty.

Heritage Since 1836, Cairns has been designing and manufacturing high-quality fire helmets. No other helmet manufacturer has our experience and history in the fire service. More firefighters choose Cairns than any other type of fire helmet.

At Cairns, safety is our tradition. So choose Cairns for the ultimate reason – YOUR safety!

2

Fire Customer Service: 1-877-MSA-FIRE • Website: www.MSAFire.com


FIRE HELMETS

Cairns® Fire Helmets A Few Words About Helmet Performance Through-color shell material to hide minor chips and scratches is available on thermoplastic and fiberglass helmet shells.

High-temperature foam liner for increased thermal and impact protection, combined with a shell-release system.

Integrated Defender Visor

Unique shock-absorbing tube. No other helmets provide this type of impact protection.

Cairns Fire Helmets are designed and manufactured to be durable. All of our leather, thermoplastic, fiberglass, and Kevlar helmets exceed industry standards for heat, impact, and penetration protection. Cairns offers the most diverse line in the industry, so you can choose the helmet that is best for your application.

Leather New Yorker N5A® and N6A™ Helmet Models Top-grain steer hide shell, layered with a highperformance thermal impact cap, skillfully hand-tooled by MSA Cairns craftsmen. The only 100% true leather helmet.

• • Aluminum-core edge trim.

Kevlar Classic 1000™ and Intruder 990® Helmet Models

• High-temperature Nomex chinstrap with quick release and postman’s slide enhances performance, safety, and fit. Velcro stowage for extra chinstrap material.

Fiberglass-reinforced Kevlar shell provides maximum thermal, impact, and penetration protection. Available in both modern and traditional styles.

Fiberglass

Other Features Shell Release System Fiberglass* and Kevlar Models Only Reduce the chance of neck injury with a shell that is designed to release from the impact cap in the event that it would become lodged during a fall. Although the outer shell releases, the impact cap and earlaps are designed to stay on the user’s head for continued impact and thermal protection. Meets NFPA 1971, Rev. 2007, 80 lbs. minimum for release requirement. * Does not include HP3

Adjustable Headband System Excludes Leather Models Cairns headband features: • Three-position, rear-ratchet height adjustment to ensure a secure, comfortable fit for all head sizes between 6 3/8 and 8 3/8 (on 880 Tradition, fit is between 5 5/8 and 7 3/8 inches). • An adjustable front headband allows perfect fit between the helmet and a SCBA mask without lifting the helmet or exposing the forehead.

Cairns® 1010 and 1044, 660C Metro™, Invader 664™ and Commando HP3® Helmet Models Exclusive, Dura-Glas® chip-resistant, throughcolor, high-performance, high-heat-resistant, compression-molded, fiberglass composite shell. Available in both modern and traditional styles.

Thermoplastic Structural 360S™, 360R™, 360R-13™ and 880 Tradition® Helmet Models Through-color thermoplastic shell combines toughness and durability with NFPA performance. Available in both modern and traditional styles. All Cairns® Kevlar, Fiberglass, Thermoplastic* and Leather N6A** Fire Helmets are certified to NFPA 1971-2007. The Leather N5A is OSHA certified. *The 360R-13 is approved to NFPA 1951-2007 only. **Natural color N6A is not NFPA compliant.

Fire Customer Service: 1-877-MSA-FIRE • Website: www.MSAFire.com

3


FIRE HELMETS

Leather Helmets Carved (shown) or silk-screened brass eagle front holder available for all traditional helmets.

Handcrafted 100% leather shell for the ultimate in tradition.

Bourkes*—The “Original”: Easy up and down, available on all traditional style helmets.

Leather Forever! Since 1836, Cairns has been the original manufacturer of leather firefighting helmets. The Houston and New Yorker helmets retain the same authentic look and quality that generation after generation of firefighters have relied upon.

Quality Craftsmanship Every Cairns leather helmet is individually handcrafted. Every helmet is ready to provide you with years of dependable service.

Handcrafting Begins with the Shell • The New Yorker and Houston shells are constructed of topgrain Steer hide, impregnated with a natural resin system, which is sealed and over-coated with a colored high-luster finish system.

* For cosmetic purposes only. Provides no eye or face protection.

N6A Houston The Original Leather Helmet Hand-crafted to meet today’s NFPA standards with over 173 years of dependable performance.

N5A New Yorker The original OSHA-approved leather helmet, individually hand-crafted to meet today’s OSHA standards with over 173 years of dependable performance.

• The crown is hand-sewn to the one-piece brim section. Showing attention to detail in every stitch, the brim is embossed with Cairns original Oak vine pattern.

All Cairns Leather Helmets offer the following features and benefits: • Handcrafted, 100% leather shell. • The Cairns 5-year shell replacement warranty. • Non-corroding, high-temperatureresistant faceshield/ goggle hardware.

• Durable helmet hanger that fits on large hooks and resists bending.

• High-temperature impact cap increases thermal and impact protection.

• Minimal parts for lower service cost and easier maintenance.

• Comfortable fit for head sizes Medium (6 3⁄8 - 7 1⁄2) and Large (7 5⁄8 - 8 3⁄8).

• Increasing your safety, a thermal impact liner is then installed within the leather crown. The thermal impact liner dramatically increases the levels of protection where you need it most. • The Cairns six-way overhead strap suspension system reduces shock transmission at the top of the helmet while providing a deep, comfortable fit. • Complete your unique helmet with the comfort pad kit supplied with every helmet. Using these pads provides a superior fit and feel that do not come in a typical fire helmet.

The N6A Houston is NFPA 1971-2007 certified. The N5A New Yorker is OSHA 1977 certified. Model

Color

Size

Eye Protection

1 Leather N6A Houston*

1 Black

1 Medium 0 None†

2 Red

2 Large

2 Leather N6A Houston with Bourkes*

3 Blue

3 Leather N5A New Yorker†

7 Naturalx

4 White 5 Yellow 6 Orange 8 Green

4 Leather N5A New Yorker with Bourkes†

* Eye protection (goggles or faceshield) required for NFPA compliance. † Not NFPA compliant x Natural color for N6A is not NFPA compliant

4

Earlap

Front Holder

1 Leather/Sateen 1 6'' Liner with Carved Jumbo Nomex Brass Yellow Earlap Eagle

Chinstrap

Trim Type

1 Nomex 0 None† with Quick 1 4'' Tuffshield 2 Reflexite Release (Standard) 2 Cairns ESS 2 Nomex Goggles 2 Leather/Sateen 2 6'' Silk with Quick 3 Scotchlite Liner with Screened Release & 3 Cairns Goggles Jumbo Eagle Postman’s 4 ESS Innerzone PBI/Kevlar Slide 3 6'' Silk 3 Goggles Earlap Screened 5 ESS Innerzone 3 Leather/Sateen Maltese 2 Goggles Liner with Cross Jumbo Nomex 6 ESS Innerzone 4 6'' Black Earlap 1 Goggles Carved Brass 7 4'' Gold-Plated Beaver Faceshield 8 6'' Gold-Plated Faceshield

Trim Color 0 Standard (Lime Yellow) 1 Lime Yellow 2 White† (Reflexite Only) 3 Red/Orange (Reflexite† & Scotchlite Only) 4 Red/Orange Triple Trim (Scotchlite Only) Lime/Yellow 5 Triple Trim (Scotchlite Only)

The Assemble-to-Order (ATO) System The ATO system is easy to use, allowing you to order the right configuration to fit your needs. The ATO system allows you to “build” your own helmet by creating a feature-specific part number. Each character of an ATO part number represents a specific component, so the entire number describes the finished helmet built exactly to your specifications. Note: A number or letter must be selected for each category. The ATO system is only used to order complete helmets. Spare parts, additional components, etc., must be ordered by specific part number.

B-LTHPart Number Fire Customer Service: 1-877-MSA-FIRE • Website: www.MSAFire.com


FIRE HELMETS

Traditional Style Helmets •

Tough, through-color, Dura-Glas™ fiberglass composite shell resists chipping and cracking.

Performance blend of 2 layers of ballistic-grade Kevlar and fiberglass composite.

Classic™ 1000:

Cairns® 1010:

Cairns® 1044:

Unmatched performance for extreme conditions.

The market leader, unparalleled balance and comfort, with high gloss paint job.

Rugged design for everyday durability.

The Classic 1000, Cairns 1010 and Cairns 1044 Fire Helmets offer the following features and benefits: • Market-leading 5-year shell replacement warranty. • Non-corroding, high-temperature-resistant, faceshield/goggle hardware. • Rugged, high-temperature edge trim will not melt or drip.

• Easy front headband adjustment for proper SCBA mask fit. • Simple rear ratchet height adjustment to fit all head sizes. • Headband (6 3⁄8 to 8 3⁄8) fits a wide variety of head sizes.

• Durable helmet hanger fits on large hooks and resists bending. • Minimal parts for lower service cost and easier maintenance. • Exclusive shell release system for an extra margin of safety. • Unique tube-lock system absorbs the shock of an impact.

Pre-Assembled Helmet Part Numbers The most popular Cairns styles, which are built to stock and more readily available, can be ordered with a Cairns part number. Standard configuration includes Standard Flannel Cushion Liners, Nomex Earlap, 6" Front Holder, and your choice of eye protection. Deluxe configuration includes Leather Cushion Liner, Flannel Crown Pad, PBI/Kevlar Earlap, Carved Brass Eagle 6" Front Holder, and your choice of eye protection. To designate a helmet color, add a W (White), B (Black), R (Red), Y (Yellow), O (Orange), C (Blue) or G (Green) after the part number.*

Classic 1000 Standard Helmets

Cairns 1010 Standard Helmets

Classic 1044 Standard Helmets

1000FS

Standard Configuration: includes Standard Flannel Cushion Liner, Nomex Earlap, 6" Front Holder & 4" Tuffshield

1010FS

Standard Configuration: includes Standard Flannel Cushion Liner, Nomex Earlap, 6" Front Holder & 4" Tuffshield

1044FS

Standard Configuration: includes Standard Flannel Cushion Liner, Nomex Earlap, 6" Front Holder & 4" Tuffshield

1000GS

Standard Configuration: includes Standard Flannel Cushion Liner, Nomex Earlap, 6" Front Holder and Cairns Goggle System

1010GS

Standard Configuration: includes Standard Flannel Cushion Liner, Nomex Earlap, 6" Front Holder and Cairns Goggle System

1044GS

Standard Configuration: includes Standard Flannel Cushion Liner, Nomex Earlap, 6" Front Holder and Cairns Goggle System

1000XS

Standard Configuration: includes Standard Flannel Cushion Liner, Nomex Earlap, 6" Front Holder and ESS Goggle System

1010XS

Standard Configuration: includes Standard Flannel Cushion Liner, Nomex Earlap, 6" Front Holder and ESS Goggle System

1044XS

Standard Configuration: includes Standard Flannel Cushion Liner, Nomex Earlap, 6" Front Holder and ESS Goggle System

1000FD

Deluxe Configuration: includes Leather Cushion Liner, Flannel Crown Pad, PBI/Kevlar Earlap, Carved Brass Eagle 6" Front Holder & 4" Tuffshield

1010FD

Deluxe Configuration: includes Leather Cushion Liner, Flannel Crown Pad, PBI/Kevlar Earlap, Carved Brass Eagle 6" Front Holder & 4" Tuffshield

1044FD

Deluxe Configuration: includes Leather Cushion Liner, Flannel Crown Pad, PBI/Kevlar Earlap, Carved Brass Eagle 6" Front Holder & 4" Tuffshield

1000GD

Deluxe Configuration: includes Leather Cushion Liner, Flannel Crown Pad, PBI/Kevlar Earlap, Carved Brass Eagle 6" Front Holder & Cairns Goggle System

1010GD

Deluxe Configuration: includes Leather Cushion Liner, Flannel Crown Pad, PBI/Kevlar Earlap, Carved Brass Eagle 6" Front Holder & Cairns Goggle System

1044GD

Deluxe Configuration: includes Leather Cushion Liner, Flannel Crown Pad, PBI/Kevlar Earlap, Carved Brass Eagle 6" Front Holder & Cairns Goggle System

1000XD

Deluxe Configuration: includes Leather Cushion Liner, Flannel Crown Pad, PBI/Kevlar Earlap, Carved Brass Eagle 6" Front Holder & ESS Goggle System

1010XD

Deluxe Configuration: includes Leather Cushion Liner, Flannel Crown Pad, PBI/Kevlar Earlap, Carved Brass Eagle 6" Front Holder & ESS Goggle System

1044XD

Deluxe Configuration: includes Leather Cushion Liner, Flannel Crown Pad, PBI/Kevlar Earlap, Carved Brass Eagle 6" Front Holder & ESS Goggle System

* Orange, Blue and Green Helmet colors not available for the Cairns 1044 Helmet.

Fire Customer Service: 1-877-MSA-FIRE • Website: www.MSAFire.com

5


FIRE HELMETS

Defender® Visor for Cairns 1010 and 1044 Helmets The Defender Visor for Cairns 1010 and 1044 Helmets offers the follwing features and benefits: • • • • • • •

Available on both the Cairns 1010 and Cairns 1044 Fire Helmets Retractable eyewear system that’s ready when you need it Available with a new helmet or as user-upgrade kit Quick-disconnect for fast lens change-out without the use of tools Never lose or misplace your eye protection again Optically correct lens eliminates peripheral distortion Doesn't block front piece like other eye protection styles

patent pending The new Defender® Visor for MSA Cairns 1010 and 1044 Traditional Helmets offers eye protection from dust, dirt, and grit. Sleek and attractive construction allows fast, easy raising and lowering of your visor even with gloved hands. This visor's exclusive integral design is retractable for the ultimate in compact convenience. Standard clear and amber Tuffshield visor options are NFPA-compliant.

New Cairns 1010 and 1044 helmet assemblies incorporating the Defender Visor may be ordered through the Traditional Helmets Assemble-ToOrder Matrix. A user-installable upgrade kit (includes new impact cap) lets you install the Defender Visor in existing Cairns 1010 or 1044 Helmets yourself. If you're in the market for a new Cairns 1010 or 1044 Helmet or if you've thought about replacing your

existing impact cap, consider the streamlined advantage of the new NFPA- compliant MSA Defender Visor. Cairns 1010 and 1044 Traditional Helmets offer the perfect combination of durability and performance in a lightweight, high-performance design. MSA Cairns once again has incorporated the latest technological advances that firefighters come to expect from the leader.

Standard 1010 Defender Configurations 1010DS

Includes Standard Flannel Cushion Liner, Yellow Nomex Earlap, Silk-Screened 6" Eagle Front Holder and Clear Defender Visor

1010DD

Includes Leather Cushion Liner, Flannel Crown Pad, PBI/Kevlar Earlap, Carved 6" Eagle Front Holder and Clear Defender Visor

1010TS

Includes Standard Flannel Cushion Liner, Yellow Nomex Earlap, Silk-Screened 6" Eagle Front Holder and Tuffshield Defender Visor

1010TD

Includes Leather Cushion Liner, Flannel Crown Pad, PBI/Kevlar Earlap, Carved 6" Eagle Front Holder and Tuffshield Defender Visor

Standard 1044 Defender Configurations 1044DS

Includes Standard Flannel Cushion Liner, Yellow Nomex Earlap, Silk-Screened 6" Eagle Front Holder and Clear Defender Visor

1044DD

Includes Leather Cushion Liner, Flannel Crown Pad, PBI/Kevlar Earlap, Carved 6" Eagle Front Holder and Clear Defender Visor

1044TS

Includes Standard Flannel Cushion Liner, Yellow Nomex Earlap, Silk-Screened 6" Eagle Front Holder and Tuffshield Defender Visor

1044TD

Includes Leather Cushion Liner, Flannel Crown Pad, PBI/Kevlar Earlap, Carved 6" Eagle Front Holder and Tuffshield Defender Visor

Defender Visor in deployed position

Defender Visor in stowed position

Defender Upgrade Assembly 10077038 Clear Lens w/ QR Chinstrap 10077039 Amber Tuffshield Lens w/ QR Chinstrap 10077040 Smoke Lens w/ QR Chinstrap 10077111 Mirror Lens w/ QR Chinstrap

Defender Visor color variety

10077112 Clear Lens w/ Slide 10077113 Amber Tuffshield Lens w/ Slide 10077114 Smoke Lens w/ Slide 10077115 Mirror Lens w/ Slide

6

Fire Customer Service: 1-877-MSA-FIRE • Website: www.MSAFire.com


FIRE HELMETS

Traditional Helmets The 880 Tradition Fire Helmet offers the following features and benefits: • Market-leading 5-year shell replacement warranty. • Non-corroding, high-temperature-resistant faceshield/goggle hardware. • Rugged, high-temperature edge will not melt or drip. • Easy front headband adjustment for proper SCBA mask fit. • Simple rear ratchet height adjustment to fit all head sizes. • Headband fits a wide variety of head sizes (5 5⁄8 to 7 5⁄8). • Durable helmet hanger fits on large hooks and resists bending. • Minimal parts for lower service cost and easier maintenance. • Unique tube-lock system absorbs the shock of an impact. • Cairns original Oak vine pattern molded into the brim.

Shown with 6” front

880 Tradition:

Tough, high-temperature thermoplastic shell resists chipping and cracking.

The combination of traditional design and legendary performance with modern materials.

Pre-Assembled Helmet Part Numbers The most popular Cairns styles, which are built to stock and more readily available, can be ordered with a Cairns part number. To designate a helmet color, add a W (White), B (Black), R (Red), Y (Yellow), O (Orange) or C (Blue) after the part number.

880 Tradition Standard Helmets

880FS

Standard Configuration: includes Standard Flannel Cushion Liner, Nomex Earlap, 6" Front Holder & 4" Tuffshield

880GS

Standard Configuration: includes Standard Flannel Cushion Liner, Nomex Earlap, 6" Front Holder and Cairns Goggle System

880XS

Standard Configuration: includes Standard Flannel Cushion Liner, Nomex Earlap, 6" Front Holder and ESS Goggle System

880FD

Deluxe Configuration: includes Leather Cushion Liner, Flannel Crown Pad, PBI/Kevlar Earlap, Carved Brass Eagle 6" Front Holder & 4" Tuffshield

New, high-tech thermal impact cap provides increased heat and impact protection.

880GD

Deluxe Configuration: includes Leather Cushion Liner, Flannel Crown Pad, PBI/Kevlar Earlap, Carved Brass Eagle 6" Front Holder & Cairns Goggle System

880XD

Deluxe Configuration: includes Leather Cushion Liner, Flannel Crown Pad, PBI/Kevlar Earlap, Carved Brass Eagle 6" Front Holder & ESS Goggle System

Low-ride helmet design creates a low-profile for superior clearance and maneuverability.

Assemble-To-Order System Model 1 2 3 4 5 6 7 8 9 B A C

Cairns 1010 Cairns 1010 with Bourkes** Classic 1000 Classic 1000 with Bourkes** 880 Tradition 880 Tradition with Bourkes** Cairns 1044 Cairns 1044 with Bourkes** Cairns 1010 with Defender Visor  Cairns 1044 with Defender Visor  1010 Defender with Bourkes**  1044 Defender with Bourkes** 

Color 1 2 3 4 5 6 7

Black Red Blue White Yellow Orange Green‡

Eye Protection** 0 1 2 3 4 5 6 7 8 9 B C

** Eye protection (Defender Visor, goggles or faceshield) required for NFPA compliance * Not NFPA compliant † Available with 880 Tradition only ‡ Not available with 880 Tradition

None* 4'' Tuffshield Cairns ESS Goggles Cairns Goggles ESS Innerzone 3 Goggles ESS Innerzone 2 Goggles ESS Innerzone 1 Goggles 4'' Gold-Coated Faceshield* 6'' Gold-Coated Faceshield* Standard Faceshield* Defender Visor, Clear  Defender Tuffshield 

Headband Liners 1 Economy Flannel 2 Standard Flannel 3 Deluxe Leather with Crown Pad

Earlaps 1 Yellow Nomex 2 Yellow Nomex with Underchin Extension 3 PBI/Kevlar 4 PBI/Kevlar with Underchin Extension 5 Bloodborne Pathogen Resistant 6 Yellow Nomex Winter Hood 7 PBI Winter Hood 9 CFR Aluminized Bonnet with PBI/Kevlar Shroud & Nomex Earlap‡ A Black Nomex

Front Holder

0 None 1 Nomex with Quick Release 1 6'' Carved Brass 2 Nomex with Eagle Quick Release & Postman’s 2 6'' Silk Slide Screened Eagle 3 6'' Silk Screened Maltese Cross 4 5'' Silk Screened Eagle† 5 5'' Silk Screened Maltese Cross† 6 6'' Carved Brass Beaver‡

C-TRD-

Fire Customer Service: 1-877-MSA-FIRE • Website: www.MSAFire.com

Chinstrap

Part Number

Trim Type

Trim Color

0 None* 2 Reflexite (Standard) 3 Scotchlite

0 Standard (Lime Yellow) 1 Lime Yellow 2 White (Reflexite Only)* 3 Red/Orange (Reflexite & Scotchlite Only)* 4 Blue (Reflexite Only)* 5 Red/Orange Triple Trim (Scotchlite Only) 6 Lime/Yellow Triple Trim (Scotchlite Only)

x Requires a 5'' front with 880 Tradition only  Not available on Cairns 1044  Must specify Defender Visor in both Model and Eye Protection selections

7


FIRE HELMETS

Modern Helmets 660C®Metro

Invader 664™:

• Durable, painted fiberglass composite.

• Rugged, through-color DuraGlas™ fiberglass composite shell.

Structural 360S®: • Lightest structural fire helmet in Cairns line. • Well-balanced construction for all-day comfort. • Tough thermoplastic shell for everyday durability.

Intruder 990®: • Extreme protection, includes 3-layers of Kevlar composite for cut and penetration resistance.

All Cairns Fire Helmets Listed Here Include the Following Features:

Shell Release System

• • • • • • • •

• Cairns-exclusive system provides an extra margin of safety - demand it! • Thermal impact cap

Market-leading 5-year shell replacement warranty. Non-corroding, high-temperature-resistant, faceshield/goggle hardware. Rugged, high-temperature edge will not melt or drip. Easy front headband adjustment for proper SCBA mask fit. Simple rear ratchet height adjustment to fit all head sizes. Headband (63/8 to 8 3/8) fits a wide variety of head sizes. Durable helmet hanger fits on large hooks and resists bending. Minimal parts for lower service cost and easier maintenance.

Impact Cap Performance • Part of Cairns complete head protection system. • Provides increased thermal and impact protection. • Tube-lock system, instrumental in absorbing the shock of an impact.

The Metro 660C, Invader 664, and Intruder 990 Helmets all feature the Shell Release System.

Pre-Assembled Helmet Part Numbers The most popular Cairns styles, which are built to stock and more readily available, can be ordered with a Cairns part number. To designate a helmet color, add a W (White), B (Black), R (Red), Y (Yellow), O (Orange), C (Blue) or G (Green) after the part number.*

660C Metro Standard Helmets

Invader 664 Standard Helmets

660CFS

Standard Configuration: includes Standard Flannel Cushion Liner, Nomex Earlap & 4" Standard Faceshield

664FS

Standard Configuration: includes Economy Flannel Cushion Liner, Nomex Earlap & 4" Standard Faceshield

660CGS

Standard Configuration: includes Standard Flannel Cushion Liner, Nomex Earlap & Cairns Goggle System

664GS

Standard Configuration: includes Economy Flannel Cushion Liner, Nomex Earlap & Cairns Goggle System

660CXS

Standard Configuration: includes Standard Flannel Cushion Liner, Nomex Earlap & ESS Goggle System

664XS

Standard Configuration: includes Economy Flannel Cushion Liner, Nomex Earlap & ESS Goggle System

660CFD

Deluxe Configuration: includes Leather Cushion Liner, Flannel Crown Pad, PBI/Kevlar Earlap & 4" Tuffshield

664FD

Deluxe Configuration: includes Leather Cushion Liner, Flannel Crown Pad, PBI/Kevlar Earlap & 4" Tuffshield

660CGD

Deluxe Configuration: includes Leather Cushion Liner, Flannel Crown Pad, PBI/Kevlar Earlap & Cairns Goggle System with Extra Lens

664GD

Deluxe Configuration: includes Leather Cushion Liner, Flannel Crown Pad, PBI/Kevlar Earlap & Cairns Goggle System with Extra Lens

660CXD

Deluxe Configuration: includes Leather Cushion Liner, Flannel Crown Pad, PBI/Kevlar Earlap & ESS Goggle System

664XD

Deluxe Configuration: includes Leather Cushion Liner, Flannel Crown Pad, PBI/Kevlar Earlap & ESS Goggle System

* Orange, Blue and Green Helmet Colors not available for Invader 664 Helmet

Structural 360S Standard Helmets 360SFS

Standard Configuration: includes Economy Flannel Cushion Liner, Nomex Earlap & 4" Standard Faceshield

360SGS

Standard Configuration: includes Economy Flannel Cushion Liner, Nomex Earlap & Cairns Goggle System

360SXS

Standard Configuration: includes Economy Flannel Cushion Liner, Nomex Earlap & ESS Goggle System

* Green Helmet Color not available for Structural 360S Helmet

8

Fire Customer Service: 1-877-MSA-FIRE • Website: www.MSAFire.com


FIRE HELMETS

Defender® Visor for Modern Style Helmets

Integral, retractable, close-fitting visor for modernstyle Cairns® Helmets. Pull the visor down to protect eyes; push it up to stow inside helmet. Low-profile, rugged eye protection.

new

• Eye protection stays clean stored inside the helmet. • Lowest-profile helmet available is good for tight spaces. • Order with your new helmet or as a user-upgrade kit. • Never lose or misplace your eye protection again.

patent pending MSA’s Defender Visor is retractable eyewear that’s ready when you need it. It can be worn with three modern-style Cairns helmets: The 660C Metro, the Invader 664, and the Commando HP3. It stays clean inside your helmet until you need eye protection during overhaul and non-IDLH search-and-recovery.

The Defender Visor’s exclusive design defines compact convenience. Its sleekness and attractive construction promote fast, easy raising and lowering, even with gloved hands. And don’t be conerned about slippage. It’s securely stowed until YOU pull it down.

Standard clear and amber Tuffshield visors are compliant with NFPA 1971, and all Defender Visors meet ANSI Z87.1+ Standard. The optically correct lens eliminates peripheral distortion. The visor quickly disconnects for fast lens changes, and requires no tools.

Defender Upgrade Assembly (660/664 Only) 10092441 Clear Lens w/ QR Chinstrap 10092442 Amber Tuffshield Lens w/ QR Chinstrap 10092443 Smoke Lens w/ QR Chinstrap 10092444 Mirror Lens w/ QR Chinstrap 10092445 Clear Lens w/ Slide 10092446 Amber Tuffshield Lens w/ Slide 10092447 Smoke Lens w/ Slide 10092448 Mirror Lens w/ Slide

Defender Visor in deployed position

Defender Visor in stowed position

Defender Visor color variety

Fire Customer Service: 1-877-MSA-FIRE • Website: www.MSAFire.com

9


FIRE HELMETS

Rescue Helmets Commando® HP3: • Low-profile design is ideal for EMS and rescue operations. • Full foam impact cap used for increased impact protection. • Durable fiberglass shell resists cracking and chipping. • Certified to both NFPA 1971-2007 and NFPA 1951-2007. • Now available with the Defender Visor!

Rescue 360R: • Lightweight, low-profile performance • Through-color, thermoplastic shell • Certified to both NFPA 1971-2007 and NFPA 1951-2007.

All Cairns Fire Helmets Listed Here Include the Following Features: • • • • • • • • •

Market-leading 5-year shell replacement warranty. Available with 3-point chinstrap and bloodborne pathogen resistant earlap. Non-corroding, high-temperature-resistant, faceshield/goggle hardware. Rugged, high-temperature edge will not melt or drip. Easy front headband adjustment for proper SCBA mask fit (HP3 only). Simple rear ratchet height adjustment to fit all head sizes. Headband (6 3/8 to 8 3/8) fits a wide variety of head sizes. Durable helmet hanger fits on large hooks and resists bending. Minimal parts for lower service cost and easier maintenance.

Rescue 360R-13: • Lightweight, low-profile performance • Through-color, thermoplastic shell • Certified to NFPA 1951-2007.

The Assemble-to-Order (ATO) System Each character of an ATO part number represents a specific component, so the entire number describes the finished helmet built exactly to your specifications.

The ATO system is easy to use, allowing you to order the right configuration to fit your needs. The ATO system allows you to “build” your own helmet by creating a feature-specific part number.

Model

Color

Eye Protection

1 990 Intruder

1 Black

0 None*

2 660C Metro

2 Red

1 4'' Tuffshield

5 HP3 Commando

3 Blue‡

2 Cairns ESS Goggles

6 360 Structural

4 White

3 Cairns Goggles

7 360 Structural without Edge Bead

5 Yellow

A Invader 664

7 Green†‡

4 ESS Innerzone 3 Goggles

6 Orange‡ 5 ESS Innerzone 2 Goggles 6 ESS Innerzone 1 Goggles

B Rescue 360R+

7 4'' Standard Faceshield

C Rescue* 360R-13

8 6'' Standard Faceshield

D 660C Metro Defender

A 6'' Gold-Coated Faceshield

E Invader 664 Defender G HP3 Commando Defender *

Headband Liners 1 Economy Flannel 2 Standard Flannel 3 Deluxe Leather with Crown Pad

9 4'' Gold-Coated Faceshield** B ESS Striketeam XTO Goggle** C Defender Visor, Clear  D Defender Visor, Amber Tuffshield 

Earlaps 0 None 1 Yellow Nomex 2 Yellow Nomex with Underchin Extension 3 PBI/Kevlar 4 PBI/Kevlar with Underchin Extension

Chinstrap 1 Nomex with Quick Release 2 Nomex with Quick Release & Postman’s Slide 3 3'' longer Nomex with Quick Release & Postman’s Slide (360 Only)

5 Bloodborne Pathogen 4 Nomex with Resistant Postman’s Slide 6 Yellow Nomex (Not available on Winter Hood HP3) 7 PBI Winter Hood 6 6'' longer Nomex with Postman’s 9 CFR Aluminized Slide Bonnet with PBI/Kevlar Shroud 7 3-Point with & Nomex Earlap Quick Release (HP3 only) A Black Nomex

Trim Type

Trim Color

Trim Shape

0 None*

0 Standard

0 Standard

2 Reflexite (Standard)

1 Lime/ Yellow

1 Tetrabar

3 Scotchlite

2 Red/ Orange*

3* Diamond

3 Blue* (Reflexite only)

4* Triple Trim (Scotch-lite only)

2* Bar

4 White*

Not NFPA approved

† Not available on 360 ‡ ** x +

 10

C-MODNot available on Invader 664 Available only on 360 and HP3 Not all colors available in all types and shapes Rescue 360R not available with faceshield Must specify Defender Visor in both model & eye protection sections

Part Number

Fire Customer Service: 1-877-MSA-FIRE • Website: www.MSAFire.com


FIRE HELMETS

Cairns Accessories Standard Fronts

Top Layer

Made with your choice of high-gloss patent leather or dull-finish genuine leather reinforced with a high-temperature, shrink-resistant back layer and sewn with high-temperature, fire-retardant Nomex thread.

The Choice Is Yours! Standard fronts offer over 27 million possible configurations! Design your own standard front by choosing from the options and then indicating your preferences by calling 1-877-MSA-FIRE to place your order.

Legend (AG) Attached Graphics = Choice of raised or sunken numbers, sunken fleur-de-lis, metal badges and decals. (PG) Printed Graphics = Choice of printed graphic symbol or number.

• Available in low-gloss 100% natural leather or high-gloss patent leather • Both leathers available in your choice of 8 colors: white, red, black, blue, yellow, green, orange or gold leaf

• •

Print Layer

• Available in 8 colors of high-temperature nylon: white, red, black, blue, yellow, green, orange or gold foil • Also available in reflective Scotchlite™ (white only)

Lettering • 1⁄2" tall, except on Mini Fronts • Maximum of 4 lines with up to 14 characters per line • Available in 8 colors: white, red, black, blue, yellow, green, orange or gold foil • Also available in reflective Scotchlite™ (white only)

Graphics

• Choose from: attached raised numbers, attached sunken numbers, printed numbers and letters, printed graphics, attached graphic decals or attached metal ornaments (shown)

(NG) No Graphics

Accountability Systems • Improve department accountability with simple numeric identification inserts • Meets NFPA 1971-2007

• High-temperature, fire-resistant hook-andloop attachment for easy placement and removal

• Available in all front piece color choices or in white reflective Scotchlite™ for higher visibility

#AS006 13⁄4” x 21⁄2”

#AS007 31⁄2” x 13⁄4”

6" Passport Accountability System

FDNY 6" Front

Passport 4", 5" and 6" Fronts

This system consists of three removable patches: 1 for the front itself and one for each side of the helmet

This system consists of a removable pinned insert and frame. • Available with sunken, raised or printed numbers only. • If front and insert colors are different, order the frame and insert separately.

This system consists of a removable hook-and-loop insert and frame. • Available with printed numbers and letters. • 5" fronts for 880 Tradition Helmet only

#61 One Insert only

#62 Frame with 3 Inserts #60 Frame only

#42 Frame and Insert #43 Frame only

#44 Frame and Insert #45 Frame only

#46 Frame and Insert #47 Frame only #48 Insert only

#49 Frame and Insert #50 Frame only #51 Insert only

#52 Frame and Insert #53 Frame only #54 Insert only

#55 Frame and Insert #56 Frame only

#58 Frame and Insert #59 Frame only #57 Insert only

Reflective Shapes and Numbers Shapes

Numbers

Shape Tetrahedron

Reflexite RP20P

Scotchlite SP20P

Size

Material

Part No.

1"

Reflexite Scotchlite

RP100P SP100P

Diamond

RP12P

SP12P

2"

Reflexite Scotchlite

RP200P SP200P

Scotchlite Tetrahedron Triple Trim Colors: Lime/Yellow, Red/Orange, White

Tetra Bar

RP17P

SP17P

Reflexite Colors: Lime/Yellow, Red/Orange*, Blue*, White*

Bar 1" x 4"

RP16P

SP16P

Scotchlite

Reflexite

Scotchlite Colors: Lime/Yellow, Red/Orange*, White*

* Does not meet NFPA 1971-2007.

Tetrahedron Triple Trim (R/O)

10062655

Tetrahedron Triple Trim (L/Y)

10062656

Fire Customer Service: 1-877-MSA-FIRE • Website: www.MSAFire.com

11


FIRE HELMETS 8" PARADE FRONTS For use on G5A or G64 presentation leather helmet (Parade-style Eagle required)

#10 (AG)

#11 (PG)

#12 (AG)

#13 (PG)

#14 (AG)

1 line of text

#15 (PG)

#16 (AG)

2 lines of text

6" FRONTS (for use on all traditional helmets) 5" FRONTS (for use on 880 Tradition fire helmet only)

#18 (NG) 4 lines of text

4" FRONTS For use on modern helmets

5" front with 2 lines of text

Note: The styles depicted below are shown on 6-inch fronts, but may be ordered for both 6-inch and 5-inch fronts. A sample 5-inch front is shown at right.

#17 (PG)

3 lines of text

#31 (AG)

#32 (PG)

#33 (AG)

#34 (PG)

1 line of text

6-inch 5-inch

#19 (AG) #150 (AG)

#20 (PG) #151(PG)

#21 (AG) #152(AG)

#22 (PG) #153(PG)

#23 (AG) #154(AG)

1 line of text

#24 (PG) #155(PG) 2 lines of text

#35 (AG)

#25 (AG) #156 (AG)

#26 (PG) #157 (PG)

#27 (AG) #158 (AG)

#28 (PG) #159 (PG)

#29 (NG) #160 (NG)

3 lines of text

GRAPHIC CHOICES FOR STANDARD FRONTS Unless otherwise noted, all graphics are available as your choice of: color-printed graphic, attached graphic decal, 14K gold badge or chrome badge. Badges are available only in choices A K. To discuss your custom artwork or logo application needs, please call 1-877-MSA-FIRE.

#37 (NG) 3 lines of text

3" MINI FRONTS For keychain and mini helmet gift items

#38 (AG) 6-inch 5-inch

#36 (PG)

2 lines of text

#30 (NG) #161 (NG)

#39 (PG)

#40 (AG)

#41 (NG)

FRONT PIECE HOLDERS

4 lines of text

BADGES

1

available in graphic choices A-K

K (14K Gold) C (Chrome)

2

3

4

5

1 Silk-Screened Eagle A

B

C

D

E

F

N5A, N6A, 1000, 1010, 1044 880 Tradition (6” Front) 880 Tradition (5” Front)

M9P 10049738 10049736

2 Carved Brass Eagle N5A, N6A, 1000, 1010, 1044 880 Tradition (6” Front)

G

H

I*

J

K

L

*Available only as a sunken cutout.

M8P 10065952

3 Maltese Cross N5A, N6A, 1000, 1010, 1044 880 Tradition (6” Front) 880 Tradition (5” Front)

M6P 10049739 10049737

4 Brass Beaver N5A, N6A, 1000, 1010, 1044

M* * EMS: Available in printed format only.

12

N**

O

** Available in tin or as graphic decal. Not available on #35.

P

Q

R

10071258

5 Carved Parade Eagle Parade-style (8” Front)

10100839

Fire Customer Service: 1-877-MSA-FIRE • Website: www.MSAFire.com


FIRE HELMETS Printed Gold Leaf Fronts • Printed, hand-drawn artwork on 23K gold background in your choice of three styles. • High-temperature materials are stable up to 500° F. • Standard designs available in 2-3 weeks. Custom designs are available at an additional charge.

Ordering is Easy! 1. Choose the background you want: 23K satin gold leaf, 23K turned gold leaf or white with gold accents. 2. Choose the design you want: classic scrolls, classic banners or flaming scroll. 3. Choose the number of lines of text you want from 1-4.

Satin Gold Leaf with Banners

Please call 1-877-MSA-FIRE to discuss your custom artwork or logo applications.

Turned Gold Leaf Gold on White with Scroll with Flaming Scroll

STANDARD 8" PRINTED GOLD LEAF

F70B

F70S

F70F

F71B

F71S

F71F

F72B

F72S

F72F

F73B

F73S

F73F

STANDARD 6" PRINTED GOLD LEAF

F74B

F74S

F74F

F75B

F75S

F75F

F76B

F76S

F76F

F77B

F77S

F77F

F78

F79

F80

F81

STANDARD 4" PRINTED GOLD LEAF

STANDARD LOGOS Nine stock logos are available. For custom logos, call 1-877-MSA-FIRE.

F82B

F82S

GA: Lieutenant

F83A

F83B

GH: Chief

GB: Lieutenant

GC: Captain

GD: Captain

GE: 2nd/Battalion Chief

GF: 1st/Deputy Chief

GG: Assistant Chief

GI: Firefighter

Fire Customer Service: 1-877-MSA-FIRE • Website: www.MSAFire.com

13


FIRE HELMETS Decals & Title Tapes All decals and title tapes are available in either vinyl or reflective Scotchlite™. Decal choices are shown below. Custom decals also available.

ENGINEER D101P DS101P

D102P DS102P

D103P DS103P

D104P DS104P

D105P DS105P

D106P DS106P

D107P DS107P

D108P DS108P

D114P DS114P

D130P DS130P

D109P DS109P

D110P DS110P

D111P DS111P

D112P DS112P

D113P DS113P

D115P DS115P

D129P DS129P

D117P DS117P

D118P DS118P

D119P DS119P

D120P DS120P

D121P DS121P

D122P DS122P

D123P DS123P

D124P DS124P

D125P DS125P

D126P DS126P

D127P DS127P

D128P DS128P

D131P DS131P

D133P DS133P

D134P DS134P

D135P DS135P

CUSTOM DECAL

FI

D201P DS201P

D202P DS202P

D203P DS203P

D204P DS204P

D205P DS205P

D206P DS206P

D207P DS207P

D208P DS208P

D209P DS209P

D210P DS210P

D211P DS211P

D212P DS212P

D213P DS213P

D214P DS214P

D215P DS215P

D216P DS216P

D217P DS217P

D218P DS218P

D219P DS219P

D220P DS220P

D221P DS221P

D222P DS222P

D223P DS223P

D224P DS224P

D225P DS225P

D226P DS226P

D227P DS227P

D228P DS228P

D229P DS229P

D230P DS230P

D231P DS231P

D232P DS232P

D233P DS233P

D234P DS234P

D235P DS235P

D236P DS236P

D237P DS237P

D238P DS238P

D239P DS239P

D240P DS240P

T99P* TS99P*

I N V E S T I G AT O

SUP

E RV I SOR

R

RE

D99P*

10068636 (Vinyl) 10068638 (Vinyl) 10068637 (Scotchlite)10068639 (Scotchlite)

* 50 Unit Minimum Required for Custom Decals

14

Fire Customer Service: 1-877-MSA-FIRE • Website: www.MSAFire.com


Creating your own front is easy! Visit MSAFire.com to build and see your custom front online. E-mail your order to your nearest MSA authorized distributor.

NEW!

Standard Fronts

Ordering Instructions

Company:

Please copy and complete a separate form for each type of front ordered. Give the completed form(s) to your sales representative or fax them to 800-967-0398.

Contact:

Fronts other than those that can be ordered given the choices below are considered custom fronts. To discuss your custom artwork or logo application needs, please call 1-877-MSA-FIRE or speak with your sales representative.

PO #:

Phone:

For office use only below this line SO#: Shop #:

Standard Fronts Enter your choices in the boxes to the right of each section.

Total Quantity:

1. Style Option

For attached graphics (AG): S Sunken Numbers (not available on 4” or Passport fronts) R Raised Sewn Numbers (not available on Passport inserts) K 14K Gold Badge, C Chrome Badge or T Tin Emblem F Fleur-de-lis (same as panel color) or D Graphic Decal

2. Shipping Option

L Loose or A Attached 3. Attachment Option

Punch front(-s) or attach to: L Leather Helmet P Plastic Helmet or K Mini Front Key Chain V Hook and Loop Attachment (for 4" fronts only) N No holes needed 4. Front Material

L Genuine Leather P High-Gloss Patent Leather 5. Front Color Option

Choose one color: B Black, W White, R Red, Y Yellow, O Orange, C Blue, G Green, N Natural/Brown or K - Gold (patent only)

For printed graphics (PG): P Printed Numbers, G Printed Graphics or N No Graphics 10.Color of Large Centered Numbers

Size determined by style chosen (not available on gold leaf) Choose one color: B Black, W White, R Red, Y Yellow, O Orange, C Blue, G Green, K Gold, S Reflective White Scotchlite™ or N No numbers 11.Graphic Ornament Option

ORDERING FORM

Enter style number from 10 to 59, or from 150 to 161

9. Graphic Option

Enter choice from A to R. 12.Text Font

Choose one text style: A

F

6. Insert Color Option

B

G

Choose one color: B Black, W White, R Red, Y Yellow, O Orange, C Blue, G Green, N Natural/Brown or K - Gold (patent only)

C

H

D

I

E

J

7. Panel Color Option

Choose one color: B Black, W White, R Red, Y Yellow, O Orange, C Blue, G Green, K Gold or S Reflective White Scotchlite™ 8. Panel Text Color Option

Choose one color: B Black, W White, R Red, Y Yellow, O Orange, C Blue, G Green, K Gold or N No printed text

13.Text

Fill in the appropriate lines of text for your front style up to 14 characters per line. Spaces and punctuation marks each count as one character. Include centered numbers as one line (4 for 6” and 8” fronts; 3 for 4”). Fill in top to bottom.

Standard Fronts Line 1 Line 2 Line 3 Line 4

Fire Customer Service: 1-877-MSA-FIRE • Website: www.MSAFire.com

15


Ordering Instructions

Company:

Please copy and complete a separate form for each type of gold leaf front ordered. Give the completed form(s) to your sales representative or fax them to 800-967-0398.

Contact: Phone: PO #: For office use only below this line SO#: Shop #:

Printed Gold Leaf Fronts Enter your choices in the boxes to the right of each section.

Total Quantity:

1. Style Option

Enter style number from 70 to 83. 2. Shipping Option

L Loose or A Attached

ORDERING FORM

3. Attachment Option

Punch front(-s) or attach to: L Leather Helmet P Plastic Helmet or K Mini Front Key Chain V Hook and Loop Attachment (for 4" fronts only) N No holes needed G Giant Size (for decoration only) 4. Artwork Option

Choose from: B Banners, F Flaming Scrolls, S Regular Scrolls, A Upward Arch (for 4" fronts only) T No text art (for 6" fronts only) 5. Graphic Option

Enter style letters from GA to GI. 6. Front Material

Choose from: GSS Gold Satin, GET Gold Engine Turned or WHT White 7. Text

Fill in the appropriate lines of text for your front style up to 14 characters per line. Spaces and punctuation marks each count as one character. Fill in top to bottom.

Gold Leaf Fronts Line 1 Line 2 Line 3 Line 4

16

Fire Customer Service: 1-877-MSA-FIRE • Website: www.MSAFire.com

Fronts other than those that can be ordered given the choices below are considered custom fronts. To discuss your custom artwork or logo application needs, please call 1-877-MSA-FIRE or speak with your sales representative.

Gold Leaf Fronts


FIRE HELMETS

Goggles, Faceshields and Proximity System for Cairns Fire Helmets NFPA Eye Protection is certified as a component on all NFPA-compliant Cairns Helmets. Cairns’ NFPA Goggles and Faceshields offer the following features and benefits: • High-temperature materials are stable up to 500º F. • Flame-retardant. • Easy donning and doffing while wearing gloves.

Cairns Goggle “Military Look,” non-vented eye protection that mounts to helmets for easy access. NFPA/ANSI/OSHA compliant.

Faceshields The Cairns 4" Standard Faceshield is standard on all Modern Helmets. (ASTM-D648 melting temperature is 325ºF.). The Cairns 4" Tuffshield, offering superior thermal and scratch resistance, is standard on all Traditional and all Deluxe Configuration Helmets. (ASTM-D648 melting temperature is 345ºF.).

Cairns’ NFPA Goggles and Faceshields both offer the following features and benefits: • Ballistic-grade lens protects against impacts. • Anti-fog coating on both sides of the lens to ensure visibility. • Superior anti-scratch coating on both sides of the lens for a longer life. • Easy lens replacement.

Cairns ESS Firefighters’ Goggles

Other faceshield options include a 4" or 6" CFR Faceshield and an extra-long 4" or 6" Gold Coated Faceshield, made with a heat-resistant polycarbonate lens and coated on the outside with 24K gold for ultra-radiant heat protection.

InnerZone One Goggle

InnerZone Three Goggle

All Cairns faceshields come supplied with wing protectors for extra face protection. Wing protectors are made of the same fire-proven material found in Cairns’ faceshield hardware to provide additional strength at high temperatures. The original easy-flip Bourkes are available on all Traditional and Leather Helmets. Use for cosmetic purposes only. Provides no eye or face protection.

NFPA Compliant Faceshields 4" Tuffshield w/ Wing Protectors

S905P

4" Standard Faceshield w/ Wing Protectors (Modern Style Helmets Only)

10037315

6" Standard Faceshield w/ Wing Protectors

S806CP

4" Gold-Coated Faceshield w/ Wing Protectors

S601GP

6" Gold-Coated Faceshield w/ Wing Protectors

S606GP

Bourkes Bourkes Kit S10K

Cairns ESS Goggle System InnerZone Two Goggle

MSA’s InnerZone series of NFPA-compliant firefighters’ goggles are certified by an independent test lab to meet the performance requirements of the NFPA Standard 1971-2007, including the test for exposure to 500° F for 5 minutes. We offer four styles of ESS goggles: The InnerZone One model attaches to structural helmets. A unique two-piece strap and mounting bracket system interfaces with all structural helmets. The InnerZone Two model has a snap-on/snap-off attachment to structural helmets. The low-profile post design works with all structural firefighting helmets. The InnerZone Three Goggle has a wraparound strap that attaches to the back of the helmet with two adhesive-backed Velcro tabs.

Defender Visors

The Cairns ESS Goggle System has a wraparound strap that attaches to the back of the helmet with a D-Ring fastener.

Lens Assembly, Clear, Defender (NFPA Compliant)

10077117

Lens, Assembly, Amber Tuffshield, Defender (NFPA Compliant)

10077118

Lens, Assembly, Smoke, Defender

10077119

NFPA Compliant Goggles

Lens, Assembly, Mirrored, Defender

10077120

InnerZone One Goggle InnerZone Two Goggle InnerZone Three Goggle

Crash Fire Rescue (CFR) Proximity System • Easy to don and doff, this CFR System is compliant with NFPA 1971-2007.

• Components consist of an aluminized PBI/Kevlar layer, vapor barrier and inner layer.

CFR Proximity System Consists Of:

Modern Helmet Shown

S550P

ESS Goggle Tear-Off Lens Covers

S555P S556P

Cairns ESS Stealth Sleeve

10059535

ESS One and Two Replacement Strap Kit

10059814

Cairns ESS Goggle System Replacement Strap Kit

10064534

ESS Strikedown XTO Goggle (non-NFPA)

10068733

FPA Goggle System & Hardware

S501P

NFPA Replacement Goggle

S503P

NFPA Replacement Goggle Lens

S506P

Bonnet for 660C and 664

10041993

Bonnet for 1010 and 1044

10041992

Cairns Fire Helmets Bag

Shroud for Helmets

10041994

Cairns Fire Helmet Bag (Holds four helmets)

6” Gold-Coated Faceshield

S549P 10032882

Cairns ESS Goggle System ESS Goggle Replacement Lens

• Designed and approved for use with the Metro 660C, Invader 664, Intruder 990, Cairns 1010, Cairns 1044 and Classic 1000 Fire Helmets, it will not interfere with the SCBA while in use.

S548P

10059084

S606G

Fire Customer Service: 1-877-MSA-FIRE • Website: www.MSAFire.com

17


FIRE HELMETS

new

Protective Eyewear

Mettle™ Safety Eyewear

Safety Eyewear

Strength wrapped in good looks that's the hallmark of our Mettle safety eyewear products.

Ratchet adjustment. Rubber-tipped temples. Gray or clear lenses with anti-fog and maximum UV protection. Meet ANSI high-impact requirements.

Mettle Agent Safety Eyewear Lustrous metal frame. Gray tinted lenses. Maximum UV and anti-scratch protection. Meet ANSI high-impact requirements.

Pro 6 Safety Eyewear The Pro 6 sporty look and three sets of interchangeable lenses allow quick "gear-shifting." This Sports Series rubber-painted frame features a flexible nose pad for a secure fit. Blue comes with rich blue mirror, gray and clear lenses. Black includes red mirror, gray and clear lenses. All lenses are anti-scratch and anti-fog with maximum UV protection. Meet ANSI high-impact requirements.

Pro 3 Safety Eyewear

Special Agent Safety Eyewear Durable satin finish. Spring-loaded temples. Light silver mirror lenses. Maximum UV and anti-scratch. Meet ANSI high-impact requirements.

Red Safe y Eyewear

ue Heat™

Silver metal frame. 7-layer blue mirrored lenses. Maximum UV and anti-scratch protection. Meet ANSI high-impact requirements.

Excellent coverage with wraparound styling. Rubber painted frames for perfect long-time wearing. Rich mirroring and matching painted flame temple detail. Maximum UV protection and anti-fog. Meet ANSI high-impact requirements.

Pro 6 Safety Eywear

Mettle Safety Eyewear

NFL Safety Glasses

10076768 Pro 6, blue frame

10087629 Mettle Agent, metal frame, gray tinted lenses

Gray Lenses

Clear Lenses

Style

10079246

10079147

Chicago Bears

10092894 Special Agent, spring loaded temples, silver indoor/outdoor mirror lens

10079249

10079150

Dallas Cowboys

10079252

10079163

Green Bay Packers

10079257

10079168

Miami Dolphins

Red Heat & Cool Blue Heat Safety Eyewear

10079261

10079170

New England Patriots

10081385 Red Heat, rich red mirrored lenses

10079262

10079172

New York Giants

10081386 Cool Blue Heat, rich blue mirrored lenses

10079263

10079174

Oakland Raiders

10079265

10079176

10076769 Pro 6, black frame

Pro 3 Safety Eywear 10053478 Pro 3, silver metal frame, blue mirrored lenses

10079272

18

Pittsburgh Steelers Washington Redskins

Fire Customer Service: 1-877-MSA-FIRE • Website: www.MSAFire.com


FIRE HELMETS

ClearCommand® HCS Helmet Communication System The ClearCommand Helmet Communication System from MSA is a state-of-the-art radio interface device which significantly improves the user’s ability to receive and send messages even in loud ambient-noise environments. It goes wherever you go. The system consists of a helmetmounted microphone and ear speaker assembly that weighs 5.3 ounces and easily snaps onto the user’s fire helmet or industrial-style helmet’s ratchet suspension. The helmet mic/ear speaker assembly connects to a lapel microphone or optional stand-alone PTT (push-to-talk) unit. The lapel microphone and PTT are permanently fitted with a connector for attachment to the specific radio of choice.

The ClearCommand Helmet Communication System also offers a plug-in truck communication adapter that can be used by firefighters, along with their helmet microphone assembly, on the way to a fire scene or other incident. Once the firefighter arrives at the scene, the truck system cable is unplugged from the helmet microphone, and the helmet microphone cable end is connected to the user’s lapel mic or PTT. The user of the Helmet Communication System has uninterrupted communication from the time the alarm sounds until the incident is over. For more complete information, see Bulletin 3639-01-MC.

Features & Benefits • Incorporates a “noise-eliminating” boneconduction voice transmitter that virtually eliminates high ambient noise levels. • Custom user-fitted ear speaker brings all incoming communication directly to the user’s ear. No need to lift your lapel mic up to your ear to hear transmission. • Easily snaps onto the ratchet suspension of fire helmets or industrial-style helmets (Wildland). The unit can be easily transferred to other users, and no tools are required for removal or installation. • Can be used over the top of facepiece head harnesses, hoods and liners without losing the quality of the transmission. • The bone-conduction microphone is made of soft silicone material, which makes it comfortable to wear, with no pressure points. • The helmet microphone assembly can be reversed on the helmet suspension to position the ear speaker on either ear.

• The helmet mic system, when used with the lapel mic or PTT, is powered by the battery from the radio. No need to replace or re-charge dry cells. • Special connectors suitable for most common radios are available for the lapel microphone and PTT, which allows users to adapt the system to their existing radios. • The helmet mic is NFPA-certified which allows its use while fighting fires. • Intrinsic safety approvals allow the use of the helmet communication system in hazardous environments. • The stand-alone PTT unit is designed for use under hazardous material suits. The large button makes it easy for the user to depress and communicate. • The helmet mic incorporates a cable keeper which allows for storage of the cable when it’s not connected to the lapel mic or PTT.

Helmet Microphone Assembly (includes Custom Fitted Flannel Headband Liner)

Communication system shown outside of earlap for illustration purposes only. For best protection and performance, earlap should be worn over the communication system.

Helmet Mic with Lapel Mic

Helmet Mic with Stand-Alone PTT

Note: Lapel Mic and Stand-Alone PTT sold separately

10042902

Lapel Mic Kits for Radio Interface* Maxon SP120, SP130, SP140

10042908

Motorola HT600, MT1000, MTX820, MTX900, Radius P200 & P500

10042909

Truck System Nexus Adapter, D. Clarke

10045732

Phonejack Adapter, D. Clarke

10045731

Parts and Accessories Remote Finger PTT

10046574

Dust Cover 10046087

Motorola HT1000, JEDI, MT2000, MTS2000, MTX838, MT839, MTX8000, MTX9000

10042903

Guard Ring, Tall

10046123

Motorola Astro and Saber

10042904

Guard Ring, Short

10046122

Motorola Radius GP300, P110, SP50, LTS2000, Spirit-III, GTX, SP21

10042905

Belt Clip Assy, Standard

10046089

Motorola STX, MX800, MX840

10042912

Belt Clip Assy, Clothes Pin Type

10046120

GE Ericsson PCS, PC2005

10042906

O-Ring, Single Pin Connector

10046121

GE Ericsson MRK, LPE-200, Prism, PX 126T

10042907

Flannel Head Band Liner

10045778

Maxon SP120, SP130, SP140

10045667

*If your specific radio is not listed above, please contact MSA Customer Service at 1-877-MSA-FIRE.

Motorola HT600, MT1000, MTX820, MTX900, Radius P200 & P500

10045668

Motorola HT1000, JEDI, MT2000, MTS2000, MTX838, MT839, MTX8000, MTX9000

10045662

Motorola Astro and Saber

10045663

Stand-Alone PTT Kits for Radio Interface*

Motorola Radius GP300, P110, SP50, LTS2000, Spirit-III, GTX, SP21

10045664

Motorola STX, MX800, MX840

10045669

GE Ericsson PCS, PC2005

10045665

GE Ericsson MRK, LPE-200, Prism, PX 126T

10045666

Fire Customer Service: 1-877-MSA-FIRE • Website: www.MSAFire.com

19


FIRE HELMETS

Passive Hearing Protection left/RIGHT Ear Muff • Patented design • Headband cups and headband conform to curves of the head to reduce pressure points • Each muff can be individually angled and adjusted • Hygiene kits available for each model

left/RIGHT Headband Earmuff 10087399 left/RIGHT, HIGH, yellow (NRR 28 dB) 10087426 left/RIGHT, MEDIUM, blue (NRR 25 dB) 10087436 left/RIGHT, LOW, white (NRR 21 dB)

Ear Plugs FormFit™ Disposable Foam Ear Plugs 10051348 FormFit Disposable Conical Urethane Foam Ear Plugs (non-corded), NRR 31 dB, Dispenser Box of 200 individually packaged pairs 10009333 FormFit Disposable Round Urethane Foam Ear Plugs (non-corded), NRR 29 dB, Dispenser Box of 200 individually packaged pairs 10009332 FormFit Disposable Round Urethane Foam Ear Plugs (corded), NRR 29 dB, Dispenser Box of 200 individually packaged pairs

Reusable Silicone Ear Plugs 10005607 Reusable Silicone Ear Plugs (corded), NRR 25 dB, Dispenser Box of 100 individually packaged pairs

Helmet Shell ATO Model A B C D H J K L M N P R

990 Intruder 990E 660C Metro** 660CE HP3 Commando** 360 Structural 360 Structural w/o Edge Bead Cairns 1010** Classic 1000 880 Tradition Invader 664** Cairns 1044**

Trim Type 

Shell Color* 1 2 3 4 5 6 7

Black Red Blue White Yellow Orange Green

0 2 3

None Reflexite Scotchlite

Trim Color 1 2 3 4

Lime Yellow Red Orange Blue White

Trim Shape 1 2 3

Tetrabar Bar Diamond

Front Holder 0 1 2 3 6 7 8 9 A

None 6'' Silk-Screened Eagle (1010, 1000 and 1044) 6'' Carved Eagle (1010, 1000 and 1044) 6'' Silk-Screened Maltese Cross (1010, 1000 and 1044) 5'' Silk-Screened Eagle (880) 5'' Silk-Screened Maltese Cross (880) 6'' Silk-Screened Eagle (880) 6'' Silk-Screened Maltese Cross (880) 6'' Carved Beaver (1010, 1000 & 1044)

* Not all colors available in all Types - see matrix

Not all colors are NFPA approved ** Not for use with Defender Visor models

20

A-REPPart Number

Fire Customer Service: 1-877-MSA-FIRE • Website: www.MSAFire.com


FIRE HELMETS

Replacement Parts for Cairns Fire Helmets LEATHER

1010 & 1044 DEFENDER

These original equipment replacement parts can be used to maintain or upgrade helmets under NFPA regulations.

880 Tradition

Leather Description Replacement P/N 1. Reflexite Tetra- Lime/Yellow RP20YP Scotchlite Tetra- Lime/Yellow SP20YP 2. Nomex Chinstrap w/ QRB & Postman Slide C893P Nomex Chinstrap w/ QRB C892P 3. Ratchet Headband System RBP 4. Leather/Sateen Cushion Liner w/ Nomex Earlap L5RP Leather/Sateen Cushion Liner w/ PBI/Kevlar Earlap L59RP 5. Leather Ratchet Pad LRPP 6. Faceshield Hardware S918P 7. 4" Tuffshield, w/ wing protectors S905P Goggle System & Hardware** S501P Replacement Goggle** S503P Replacement Goggle Lens** S506P Cairns ESS Goggle** S550P Replacement Lens** S556P Bourkes S10KP* 8. Silk Screened Eagle 6" Front Holder M9P Carved Brass Eagle 6" Front Holder M8P 9. Brass Crown Piece M10P 10. Foam Adjustment Kit M560P 11. Foam Crown Pad FCPP * Use of these items meets OSHA only, not NFPA.

**Not Shown

1010 & 1044 Defender Description Replacement P/N Helmet Shell Complete* - See Helmet Shell ATO (pg. 20) 660 Defender 664 Defender Black 10075391 10075383 Red 10075389 10075382 Blue 10075387 10075299 White 10075390 10075381 Yellow 10075388 10075384 Orange 10075386 10075300 Green 10075385 2. Reflexite Tetra - Lime / Yellow RP20YP Scotchlite Tetra - Lime / Yellow SP20YP 3. Chinstrap Replacement Nomex w/ Quick Release Buckle C892P Nomex w/ Quick Release Buckle & Postman's Slide C893P 4. Impact Cap Assemblies with Quick Release Chinstrap, Clear 10077038 with Quick Release Chinstrap, Amber Tuffshield 10077039 with Quick Release Chinstrap, Smoke 10077040 with Quick Release Chinstrap, Mirror 10077111 with Quick Release & Postman's Slide Chinstrap, Clear 10077112 with Quick Release & Postman's Slide Chinstrap, Amber Tuffshield 10077113 with Quick Release & Postman's Slide Chinstrap, Smoke 10077114 with Quick Release & Postman's Slide Chinstrap, Mirror 10077115 5. Ratchet Headband Assembly RHBP 6. Headband & Ratchet Liner Economy Flannel LK27P Standard Flannel LK28P Deluxe Leather (Includes Flannel Crown Pad) LK29P 7. Defender, Tab, Retainer , Replacement 10077121 8. Defender Lens Assembly Clear 10077117 Amber Tuffshield 10077118 Smoke 10077119 Mirrored 10077120 9. Earlaps Nomex 10075773 PBI / Kevlar 10075774 10. Front Mounting Bracket M16P 11. 6" Front Holders Carved Brass Eagle 6" Front Holder M8P Silkscreened Eagle 6" Front Holder M9P Maltese Cross 6" Front Holder M6P Carved Brass Beaver 6" Front Holder 10071259 1.

880 TRADITION

TRADITIONAL

Fire Customer Service: 1-877-MSA-FIRE • Website: www.MSAFire.com

Description Replacement P/N See Helmet Shell ATO (pg. 20) Reflexite Tetra Lime/Yellow RT20YP Scotchlite Tetra Lime/Yellow SP20YP Glo-Flex Tetra Lime/Yellow G20YP 3. Nomex Chinstrap w/ QRB C89P Nomex Chinstrap w/ QRB & Postman Buckle 10046712 Economy Nomex Chinstrap w/ QRB 10046713 4. Impact Cap, Overhead Suspension 10049740 5. Ratchet Headband System 10046721 6. Cushion Liner Economy Flannel LK27P Cushion Liner Standard Flannel LK28P Cushion Liner Deluxe Leather LK29P 7. Faceshield Hardware S918P 8. 4" Tuffshield w/ wing protectors S905P 4" Faceshield w/wing protectors 10037315 6" Faceshield, w/wing protectors S806CP Cairns Goggle System & Hardware S501P** Inner Zone I S548P** Inner Zone II S549P** Inner Zone III 10032882** Replacement Goggle Lens S506P** Cairns ESS Goggle S550P** Bourkes & Hardware S10KP** 9. Economy Nomex Earlap 10049488 Nomex Earlap 10046723 PBI/Kevlar Earlap 10049734 PBI/Kevlar Earlap with Moisture Barrier 10049735 Nomex Earlap with Underchin Extension 10049833** PBI/Kevlar Earlap with Underchin Extension 10049834** 10. Front Mounting Bracket Kit for 880 10047526 11. Silk Screened Eagle 5" Front Holder 10049736 Silk Screened Maltese Cross 5" Front Holder 10049737 Silk Screened Eagle 6" Front Holder 10049738 Silk Screened Maltese Cross 6" Front Holder 10049739 12. Helmet Hanger Replacement Kit 10049831 Edge Trim Replacement 10049832 1. 2.

**Not Shown

Traditional Classic 1000, Cairns 1010 and Cairns 1044 Description Replacement P/N Helmet Shell Complete - See Helmet Shell ATO (pg. 20) Reflexite Tetra Lime/Yellow RP20YP Scotchlite Tetra Lime/Yellow SP20YP 3. Nomex Chinstrap w/ QRB & Postman Slide C922P Nomex Chinstrap w/ QRB C923P 4. Impact Cap, Overhead Suspension, Chinstrap M604P w/ QRB & Postman Slide, RHB, Nomex Earlap & Std. Flannel Liner 5. Ratchet Headband System RHBP 6. Headband & Ratchet Liner Economy Flannel LK27P Headband & Ratchet Liner Standard Flannel LK28P Headband & Ratchet Liner Deluxe Leather LK29P 6A. Flannel Crown Pad included in Deluxe Model 7. Faceshield Hardware S918P 8. 4" Tuffshield w/ wing protectors S905P 4" Faceshield w/ wing protectors 10037315* 6" Faceshield w/ wing protectors S806CP* Goggle System & Hardware S501P** Replacement Goggle S503P** Replacement Goggle Lens S506P** Cairns ESS Goggle S550P** Cairns ESS Goggle Replacement Lens S556P** Bourkes & Hardware S10KP* 9. Nomex Earlap L655XP PBI/Kevlar Earlap L955P 10. Front Mounting Bracket M16P 11. Silk Screened Eagle 6" Front Holder M9P Carved Brass Eagle 6" Front Holder M8P 1. 2.

* Use of these items meets OSHA only, not NFPA.

**Not Shown

21


FIRE HELMETS MODERN

MODERN DEFENDER

Modern

Commando HP3

Description Replacement P/N 1. Helmet Shell Complete - See Helmet Shell ATO (pg. 20) 2. Reflexite Bars Lime/Yellow RP16YP Scotchlite Bars Lime/Yellow SP16YP Reflexite Tetra Bars–Lime/Yellow RP17YP Scotchlite Tetra Bars Lime/Yellow SP17YP Reflexite Diamonds Lime/Yellow RP12YP Scotchlite Diamonds Lime/Yellow SP12YP 3. Nomex Chinstrap w/ QRB & C922P Postman Slide Nomex Chinstrap w/ QRB C923P 4. Impact Cap, Overhead Suspension M603P Chinstrap w/ QRB & Postman Slide, RHB, Nomex Earlap & Std. Flannel Liner 5. Ratchet Headband System RHBP 6. Headband & Ratchet Liner Economy Flannel LK27P Standard Flannel LK28P Deluxe Leather LK29P 6A. Flannel Crown Pad Included in Deluxe Model 7. Faceshield Hardware S910P 8. 4" Faceshield, w/ wing protectors 10037315 6" Faceshield, w/ wing protectors S806CP 4" Tuffshield, w/ wing protectors S905P Goggle System & Hardware S501P** Replacement Goggle S503P** Replacement Goggle Lens S506P** Cairns ESS Goggle S550P** Cairns ESS Goggle Replacement Lens S556P** 9. Nomex Earlap L655XP PBI/Kevlar Earlap L955P

1. 2. 3. 4.

5. 6.

7. 8.

8.

9.

Description Replacement P/N Helmet Shell Complete - See Helmet Shell ATO (pg. 20) Reflexite Tetra Bars Lime/Yellow RT18YP Scotchlite Tetra Bars Lime/Yellow ST18YP Nomex Chinstrap w/ QRB & Postman Slide C892P Nomex Chinstrap w/ QRB C893P Impact Cap, Overhead Suspension, M603P Nomex Chinstrap w/ QRB & Postman Slide,RHB, Nomex Earlap & Std. Flannel Liner Ratchet Headband System RHBP Headband & Ratchet Liner Economy Flannel LK27P Standard Flannel LK28P Deluxe Leather LK29P Faceshield Hardware S620P 4" Standard Faceshield 10037315P 4" Standard Faceshield w/o wing protectors S802AP 6" Standard Faceshield w/ wing protectors S806CP 4" Tuffshield w/ wing protectors S905P Goggle System & Hardware S501P** Replacement Goggle S503P** Replacement Goggle Lens S506P** Cairns ESS Goggle S550P** Cairns ESS Goggle Replacement Lens S556P** Nomex Earlap 655XP PBI/Kevlar Earlap L955P

**Not Shown

Structural 360 **Not Shown 1. 2.

Modern Defender 1.

360 STRUCTURAL

2. 3.

4.

5. 6. HP3

7. 8.

9.

Description Replacement P/N Helmet Shell Complete* - See Helmet Shell ATO (pg. 20) 660 Defender 664 Defender Black 10092360 10092385 Red 10092359 10092384 Blue 10092356 White 10092358 10092383 Yellow 10092361 10092386 Orange 10092357 Green 10096234 Reflexite Bar - Lime / Yellow RT16Y Scotchlite Bar - Lime / Yellow ST16Y Chinstrap Replacement Nomex w/ Quick Release Buckle C892P Nomex w/ Quick Release Buckle & Postman's Slide C893P Impact Cap Assemblies with Quick Release Chinstrap, Standard 10096894 with Quick Release & Postman's Slide Chinstrap, Standard 10096895 with Quick Release Chinstrap, Deluxe 10096896 with Quick Release & Postman's Slide Chinstrap, Deluxe 10096897 Ratchet Headband Assembly RHBP Headband & Ratchet Liner Economy Flannel LK27P Standard Flannel LK28P Deluxe Leather (Includes Flannel Crown Pad) LK29P Defender, Tab, Retainer Replacement 10096795 Defender Lens Assembly Clear 10077117 Amber Tuffshield 10077118 Smoke 10077119 Mirrored 10077120 Earlaps Nomex 10075773 PBI / Kevlar 10075774

3. 4.

5. 6.

7. 8.

9.

Description Replacement P/N Helmet Shell Complete - See Helmet Shell ATO (pg. 20) Reflexite Tetra Bars Lime Yellow RT17YP Scotchlite Tetra Bars Lime Yellow ST17YP Nomex Chinstrap w/ QRB C892P Nomex Chinstrap w/ QRB & Postman Slide C893P Impact Cap w/ Overhead Suspension, Chinstrap w/ QRB, RHB, Nomex Earlap, & Economy Flannel Liner M802P Ratchet Headband System RHBP Headband & Ratchet Liner Economy Flannel LK27P Standard Flannel LK28P Deluxe Leather LK29P Faceshield Hardware S912P 4" Std. Faceshield, w/o Wing Protectors S802AP 4" Std. Faceshield, w/ Wing Protectors 10037315P 6" Std. Faceshield, w/ Wing Protectors S806CP 4" Tuffshield, w/o Wing Protectors S901P 4" Tuffshield, w/ Wing Protectors S905P Goggle System & Hardware S501P** Replacement Goggle S503P** Replacement Goggle Lens S506P** Cairns ESS Goggle S550P** Cairns ESS Goggle Replacement Lens S556P** Nomex Earlap L655XP PBI/Kevlar Earlap L955P

**Not Shown

*Specify by Color

22

Fire Customer Service: 1-877-MSA-FIRE • Website: www.MSAFire.com


FIRE HELMETS

Cairns Gifts

To see our current selection and to purchase gear online, go to www.MSAFire.com Click on “Fire Helmets” and then “Cairns Gear” to order.

“Leather Forever” Keychain A pewter replica of a traditional Cairns leather helmet with the “Leather Forever” logo engraved on the underside of the helmet’s brim.

Authentic Presentation Helmet* Replica of a turn-of-the-century helmet. For display only. G5A and G64 Leather models. 880 presentation helmet also available.

Mini Leather Helmets* A scaled-down version of our traditional New Yorker Helmet. Perfect for your mantelpiece, promotions, awards and retirements. Approximately 7 1/4” x 5 5/8” x 4”.

Mini Front Keychains* Mini Leather Helmet

Unique gift idea, personalized for your needs. * Items shown here not available online. Please order by calling MSA Fire Service Customer Service at 1-877-MSA-FIRE.

880 Tradition Presentation Helmet

Cairns Gifts are made with the same quality as all Cairns products

Fire Customer Service: 1-877-MSA-FIRE • Website: www.MSAFire.com

Authentic G5A Leather Presentation Helmet (shown with 8" High Eagle)

Authentic G64 Leather Presentation Helmet

23


Additional Cairns Information Warranty Contact the MSA Fire Service Customer Service at 1-877-MSA FIRE or refer to Bulletin No. 3600-09-MC for complete information.

! WARNING â–˛ Wearing protective equipment without proper training in firefighting techniques, or without knowledge of the proper selection, use and care of protective equipment could result in serious personal injury, or death.

Note: This Bulletin contains only a general description of the products shown. While uses and performance capabilities are described, under no circumstances shall the products be used by untrained or unqualified individuals and not until the product instructions including any warnings or cautions provided have been thoroughly read and understood. Only they contain the complete and detailed information concerning proper use and care of these products.

Corporate Headquarters: P.O. Box 426 Pittsburgh, PA 15230 USA e-mail info@MSAFire.com www.MSAFire.com

Bulletin 3600-01-MC April 2009 ŠMSA 2009 Printed in U.S.A.

MSA International: Phone (412) 967-3354 Fax (412) 967-3451

Fire Customer Service: Phone 1-877-MSA-FIRE Fax 1-800-967-0398

MSA Canada: Phone 800-MSA-2222 Fax 905-238-4151 MSA Mexico: Phone 01 800 672 7222 Fax 52 - 44 2227 3943


MSA2009-2010FireHelmetsCatalog