Issuu on Google+


Patient Monitoring

Patient Monitoring Reliable monitoring for mobile and stationary use

Patient Monitoring

The information about oxygen saturation of blood and

suitable for use with the LIFE-BASE portable system. For

the carbon dioxide content of exhaled air are important

spot checks in rescue services and in doctors‘ practices,

indicators of your patient‘s condition. Weinmann has

Weinmann offers smartOx. The handy pulse oximeter

developed to robust and compact devices for these vital

fits in any jacket pocket and, like OXYCOUNT mini and

measurements: the pulse oximeter OXYCOUNT mini and

CAPNOCOUNT mini, uses gentle non-invasive measure-

the capnometer CAPNOCOUNT mini, both of which are

ment technology.



Patient Monitoring



Pulse oximeter WM 18000

Pulse oximeter WM 905001)

When you need to know immediately your patient‘s arterial oxygen saturation and pulse, use our handy pulse oximeter smartOx. It fits in any jacket or lab coat pocket and delivers the information you need now, accurately and efficiently.

In addition to measuring arterial oxygen saturation, OXYCOUNT mini also determines your patient‘s pulse. Artifact suppression with FAL 2) High accuracy with SPA 3) technology

Display of oxygen saturation and pulse in figures

Acoustic monitoring by SpO2-dependent pulse signal

Pulse is shown in bar chart Optimized artifact suppression with integrated artifact leveling

Visual and acoustic alarms, alarm thresholds can be set Supply Schedule: OXYCOUNT mini pulse oximeter (WM 90506)

Supply Schedule:

Fingerclipsensor for adults, with 1.25-mter cable (WM 90520)

smartOx pulse oximeter Fingerclip sensor with cable (WM 18010)

Battery compartment with 9-V battery block (WM 99207)

smartOx WM 18050 (not shown) Design identical to WM 18000, but with soft-tip sensor (WM 18030) instead of WM 18010


Article to be discontinued


FAN = Flexible Artifact Leveling


SPA = Split Pulse Wave Algorithm

Pulse oxymitry Fast and effective Supplying an adequate amount of oxygen to the body is one of our vital functions. If the process is disrupted, we are threatened by respiratory distress and exhaustion. Medical personnel use pulse oximetry to monitor oxygen saturation of hemoglobin and thus the supply of oxygen to the body. This non-invasive method eliminates the need for blood samples, avoids the risks involved with sampling and demands much less medical expertise from the user.

Please go to to read all technical data in product data sheets or instructions for use.

Our pulse oximetry shows photometrically measured oxygen saturation (SpO2) and pulse rate. For more than 20 years this tried-and-tested process has become one of the most important elements in patient monitoring for use in anesthesiology, intensive care units and in rescue services. Pulse oxymitry makes possible spot checks and continuous measurement of oxygen saturation.

Patient Monitoring


MODUL CapnoVol

Capnometer WM 971441)

Ventilation Monitoring WM 22460

Our capnometer CAPNOCOUNT mini provides absolute certainty about the position of the tube or effectiveness of chest compressions. With the print and charging station MULTIBASE 2, which is also suitable for use with the pulse oximeter OXYCOUNT mini, you can print out current measurements.

Concentrate completely on emergency ventilation. Don‘t waste any time with sorting and untangling cables. With the MODUL CapnoVol on the LIFE-BASE portable system right next to the ventilator, you can conveniently monitor the ventilator as it works. MODUL CapnoVol displays the expiratory volume and the CO2 content in exhaled air (capnography) – for sure, accurate and conclusive results.

Anesthesia monitoring The first measurement for intubation check after only 12 seconds

Intuitive operation

Helicopter mode for accurate measurement even when aircraft is ascending and descending

Large and clear display

Alarm thresholds can be set for etCO2 and respiratory rate

Has an extensive acoustic and visual alarm system

Alarms for apnea, occulusion, device error, recharge battery

Up to two hours of continuous operation

Safe side-stream technology for intubated and non-intubated patients of any age

Fits on the LIFE-BASE portable system

Shows expiratory volume and CO2 content of exhaled air

Existing LIFE-BASE systems can be retrofit

Supply Schedule: CAPNOCOUNT mini (WM 97102) MULTIBASE 2, print and charging station (WM 99240) Set of water filters, 5 pcs., Ø 25 mm (WM 97010) Set of connection hoses, 5 pcs., 1.5 m (WM 97020) Set of tube adapters, 5 pcs., sterile, 22/15 mm (WM 97031) Power pack 12V / 1A (WM 99248) Rechargeable NiMH battery (WM 99206) 1)

Article to be discontinued

Capnometry Safe and precise Capnometry determines the level of carbon dioxide in the patient‘s exhaled air. This non-invasive method is used in the continuous monitoring of ventilated patients, particularly in anesthesiology, intensive care and pre-hospital emergency medicine. It provides fast and reliable monitoring of the correct tube position for emergency doctors and rescue personnel. In addition, capnometry permits direct ventilation and anesthesia management based on end-expiratory carbon

dioxide (etCO2) – with which the effectiveness of cardiac massage can be immediately assessed. Capnometry has become a permanent component in most hospital ventilators, medical monitors and defibrillators. Small portable systems have been specially designed for the monitoring patients during transport and for patients in the care of rescue services.



Patient Monitoring




2 5

Accessories for OXYCOUNT mini and CAPNOCOUNT mini Battery compartment with battery WM 99207 30-minute operating capacity in CAPNOCOUNT mini, 24-hour operating capacity in OXYCOUNT mini 1

12-volt connection cable (not shown) WM 99250 1.8 meters Standby bag (not shown) WM 97130 for CAPNOCOUNT mini and OXYCOUNT mini, complete with red and blue reflector strips and belt loops

Please go to to read all technical data in product data sheets or instructions for use.

Set of water filters for capnocount mini WM 97010 5 pcs., Ø 25 mm 2

Set of water filters for capnocount mini WM 97011 5 pcs., Ø 13 mm 3

Set of tube adapters for capnocount mini WM 97031 5 pcs., steril, 22/15 mm 4

Set of connection hoses for capnocount mini WM 97020 5 pcs., 1.5 m 5

Patient Monitoring










SpO2 Sensors for pulse oximetry SpO2 Sensors only for OXYCOUNT mini Reusable sensors

SpO2 sensors only for smartOx Reusable Sensors:

SpO2 fingerclip sensor WM 90420 reusable, body weight more than 45 kg, cable length: about 125 cm


SpO2 fingerclip sensor, WM 90520 reusable, body weight more than 20 kg, cable length: about 120 cm (this sensor is a component of WM 90500 and WM 90544) 2

Universal SpO2 Y-sensor (not shown) WM 90321 reusable, body weight more than 3 kg, cable length: about 120 cm

Disposable Sensors For use with disposable sensors, an extension cable WM 90432 with a length of about 150 cm is required; also used with WM 90420. For OXYCOUNT mini devices up to serial number 2500, please order extension cable WM 90330. 3 SpO2 disposable sensor, WM 90327 one-time use, body weight from 15 to 45 kg, cable length: about 60 cm, Units in package: 10 4 SpO2 disposable sensor WM 90326 one-time use, body weight more than 45 kg, cable length: about 60 cm, Units in package: 10


Softtip sensor SpO2 WM 18030

Size M, reusable, body weight > 20 kg, with MiniMed plug, cable length: about 120 cm 6 Softtip sensor SpO2 WM 18035 Size L, reusable, body weight > 20 kg, with MiniMed plug, cable length: about 120 cm 7 Softtip sensor SpO2 WM 18040 Size S, reusable, body weight > 20 kg, with MiniMed plug, cable length: about 120 cm 8 Fingerclip sensor SpO2 WM 18010 with MiniMed plug, reusable, body weight > 20 kg, cable length: about 120 cm

Disposable Sensors: 9 Set of disposable sensors SpO2 WM 18025 one-time use, body weight > 30 kg, cable length: about 45 cm, Units in package: 24