Tricks For Replacing Your Toilet Ring It can be a massive headache to deal with a leaky toilet but it is one of those household chores which must be tackled. If the dilemma is not an immediate emergency, you could find yourself waiting for a little while before the pluming company can come and replace the seal around your toilet. You might be able to handle the project on your own if you know for certain the toilet ring needs replacing. If you find that you would like to try replacing the ring on your own before calling the plumber, below are great tips to help you out. First, make sure you get the right replacement ring for your commode. A certain type of ring may be required if you have a toilet that is not considered standard. You might be able to find a ring relatively easy if it is a standard size. If you do have questions, you might be able to ask at your local hardware store. Always have everything that you need on hand before starting any work on commode or you will find yourself in a sizeable mess. Prior to starting any work on the toilet, be certain to shut off the water supply. The piping around the toilet should have a knob you are able to cut off the water so it is not running. You may need to go to your main water supply if there is no shut off valve at the toilet then again. If you do not know how to shut off your water supply at all, you must find out. Once you've shut off the water, be sure to flush the toilet to empty out the bowl and the tank. The next phase is to remove the base of the bathroom toilet from the floor. This is usually held in place by a few nuts that are protected by caps. You need to take off the caps and take out the nuts. A pair of plier as well as some oil may be needed for this. The water lines should next be removed from the commode and rock it forwards and backwards to break the seal. Your toilet should be held in its place by caulking and the old seal. Rocking the toilet helps the caulking and the old seal to break up so you can move the toilet. Make sure that when you rock the toilet, you grab onto the bowl to do so. Just holding onto the tank could result in you cracking the toilet. The old sealant will have to be removed. Put your brand new toilet ring or seal where the old seal had been. After you put the toilet back in position, you will need to sit on it for a little while to make certain the seal seals correctly. When you stand up, make sure the toilet bowl is sitting level. Now work in the complete opposite: replace the nuts, making sure to tighten them by hand so that you do not break the toilet bowl base. Hook up the water line and just turn the water back on and fill the toilet tank. To make sure there are no leaks, flush the toilet and look for any liquid coming out where it shouldn't be. If you see no leakage, put on new caulking around the base. Repairing a toilet ring is usually a lot simpler than you thought. Why bring in a plumber when you can get the problem fixed in no time at all with little tools and know how. Lastly, once the job is completed, remember to wash your hands good with soap. It can be a massive headache to deal with a leaky toilet but it is one of those household chores which must be tackled. ...
Sani Seal LLC
Tricks For Replacing Your Toilet Ring
Document Tags: toilet bowl ring, toilet wax ring http://www.sanisealgasket.com/
Sani Seal LLC