Issuu on Google+

Harris Theater TECHNICAL SPECIFICATIONS

TABLE OF CONTENTS (click on link) CONTACT INFORMATION

FIRE & PYROTECHNICS

AUDITORIUM INFORMATION

CONSOLE LOCATIONS

Seat Count

Stage Managers Console

Seating Chart

Road Console Placement

Technical Holds

WARDROBE & LAUNDRY

LOCATION / APPROACH / ACCESS LOADING DOCKS

Capacity

STAGE SPECIFICATIONS Dimensions

(none on site)

(none on site)

STAGE RISERS / TABLES / PODIUMS / CHAIRS

(none on site)

(none on site)

Soft Goods Inventory

(none on site)

(none on site)

Control and Dimming (none on site)

DMX and Transfer

CHAIN MOTORS/PERSONNEL LIFTS / MATERIAL HANDLING

ELECTRICS Company Switch

REHEARSAL STUDIOS GREEN ROOM

Construction

Line Sets

DRESSING ROOMS Location

Main Dock

Rigging

(none on site)

(none on site)

Lighting Inventory Repertory Plot

ORCHESTRA PIT

(none on site)

Capacity Dimensions Equipment Pianos

Accessories

DANCE EQUIPMENT

Dimmer Schedule

FOGGERS

SOUND Main system Inventory Communication ClearCom Paging/Program Radio Frequency Coordination Policy

Harris Theater Technical Specifications Revised November 2011 Page 1 of 13

(none on site)

(none on site)

(none on site)

PROJECTION SYSTEM WIRELESS INTERNET

(none on site)


HARRIS THEATER CONTACT INFORMATION Theater Address:

809 Liberty Avenue Pittsburgh, PA 15222

Mailing Address:

803 Liberty Avenue Pittsburgh, PA 15222 (for large package shipping, please call)

Administration: FAX: Ticketing:

412-456-1350 412-456-1365 412-456-6666 (public)

The Harris Theater employs Union stagehands; Union contract is with I.A.T.S.E., Local #3.

AUDITORIUM INFORMATION The Harris Theater is a long and narrow film presentation venue. Its seating is fixed in an “end stage/screen” configuration, utilized by ongoing film screenings.

SEAT COUNT Floor: Balcony: Total Seats

150 44 194

Front two rows are removable.

BACK TO TOP Harris Theater Technical Specifications Revised November 2011 Page 2 of 13


SEATING CHART Harris Theater

TECHNICAL HOLDS There are no standard holds in the seating area. Rows A & B (seats 1–10) are removable. Row O (Seats 1–4) are removable. Please advance any modification of the standard seating configuration with the Production Department.

BACK TO TOP Harris Theater Technical Specifications Revised November 2011 Page 3 of 13


LOCATION/APPROACH/ ACCESS The Harris Theater is located in Downtown Pittsburgh, Pennsylvania, on Liberty Avenue.

The Marquee & public entrance is on the 800 block of Liberty Avenue Stage/Loading door entrance is on Exchange Way (the alley between Liberty Avenue & Penn Avenue) The Harris Theater provides loading access only. NO PARKING is available at this venue. For navigational search tools, use 809 Liberty Avenue, Pittsburgh PA 15222.

BACK TO TOP Harris Theater Technical Specifications Revised November 2011 Page 4 of 13


LOADING DOCK MAIN DOCK Location:

Upstage

Dimensions:

Single man door, auditorium level, street level

Trucks:

Street level loading

Cable Pass:

Not available

Shore Power:

Not available

Loading Ramps:

Not available

Stage/Loading door entrance is on Exchange Way (the alley between Liberty Avenue & Penn Avenue) The Harris Theater provides loading access only. NO PARKING is available at this venue.

BACK TO TOP Harris Theater Technical Specifications Revised November 2011 Page 5 of 13


STAGE SPECIFICATIONS DIMENSIONS Stage Layout:

Wenger stage risers are available for this location

Inventory:

(4) 4' x 6' risers 16" legs 16' wide x 6' deep is the standard configuration 16" high

Screen size:

12' high x 20' wide (Masking is adjustable)

CONSTRUCTION No additional deck material is applied to the stock risers

RIGGING No rigging points available in this venue

SOFT GOODS INVENTORY No soft goods available

LINE SETS None available at this venue

BACK TO TOP Harris Theater Technical Specifications Revised November 2011 Page 6 of 13


ELECTRICS “Stage” lighting in this facility consists of a small number of pre-hung, pre-focused, pre-gelled general stage washes, controllable with pre-patched wall mount faders from the rear of the auditorium. Any needs beyond general wash lighting and the wall mount fader control system must be advanced with the production department.

CONTROL AND DIMMING (1)

Colortran Prestige 2000+

(24) ETC Sensor Dimmers – 2.4k

COMPANY SWITCH There are no provisions for road power

DMX AND TRANSFER PANEL The house lighting system is able to be accessed by road consoles

INSTRUMENT INVENTORY Gel frame size

(15) Colortran 26 degree

750w

7.5"

REPERTORY PLOT All available inventory listed is utilized in a permanent repertory hang that is patched, focused, and controlled with wall-mount faders from the rear of the auditorium. Any modifications to or alternate arrangements for the lighting system in the Harris Theater must be advanced with the production department.

ACCESSORIES There are no lighting accessories

BACK TO TOP Harris Theater Technical Specifications Revised November 2011 Page 7 of 13


SOUND The system is built for speech reinforcement and is controllable from a panel device at the rear of the auditorium. It can run up to 8 microphone inputs. The EQ is not adjustable.

MAIN SYSTEM (1)

Lectrosonics AM8 Automatic Microphone Mixer

(1)

Altec-Lansing 4024A digital signal processor

(1)

EV AP2300SA Power Amplifier

(1)

EV AP2600A Power Amplifier

INVENTORY Please inquire

COMMUNICATION ClearCom (1)

MS-222 base station

(1)

MR-102A remote station

Paging/Program (1) Clear-com KB-112

BACK TO TOP Harris Theater Technical Specifications Revised November 2011 Page 8 of 13


Radio Frequency Coordination Policy Use of Radio Frequency (RF) Equipment by Visiting Productions and Prior Frequency Coordination 1 In an effort to ensure all events and users are able to avoid radio frequency (RF) interference with production and venue related RF equipment, it is required without exception that ALL RF transmission equipment to be brought into or onto venue property by any visiting production, except that listed in the “RF Transmission Equipment Exception List”, be coordinated with Harris Theater Audio Department at least (1) week prior to load in. 2 All visiting production’s RF transmission equipment shall comply with all pertinent Federal Communications Commission (FCC) rules and regulations in effect at the time of load in and for the duration of the production. Harris Theater reserves the right to examine and test the visiting production’s RF transmission equipment at any time it is scheduled to be used on venue property to insure conformity with manufacturer’s performance specifications, compliance with FCC technical requirements, to determine interference potential, and/or to determine suspect interference. 3 Under no circumstances will the Harris Theater permit, authorize or otherwise tolerate the operation of any transmission equipment which has as its primary purpose to jam or otherwise restrict the operation of cellular/PCS or pager services in the frequency range of 698MHz - 2000MHz (2GHz). 4 Failure to coordinate the visiting production’s RF transmission equipment with the venue prior to load in may result in the delay of, or forbiddance to use the RF equipment. Harris Theater reserves the right to take such action as it believes reasonably necessary in order to prevent operation of said equipment until the coordination and/or interference issues can be resolved, or to secure the transmission equipment until it can be removed from the venue. 5 For the purposes of prior coordination, the visiting production shall provide the following detailed RF transmission equipment information to The Harris Theater Audio Department at least (1) week prior to load in: a) Contact name and mobile telephone number and/or e-mail address of individual responsible for visiting production’s RF transmission equipment. b) The manufacturer, model, specific frequency bandsplit(s) or pre-programmed frequencies (if applicable) of each piece of RF transmission equipment to be operated on venue property by the production. c) Quantities of each item in paragraph 4a. d) If RF transmission equipment is capable of variable RF power output, proposed power level for use on venue property must be indicated for each piece of RF transmission equipment. e) posed frequencies for use as a result of any pre-determined frequency band plan.

BACK TO TOP Harris Theater Technical Specifications Revised November 2011 Page 9 of 13


Radio Frequency Coordination Policy (continued)

6 Partial list of RF transmission equipment subject to prior coordination: - Two-way radios operating in any frequency range, including 800MHz ESMR (Nextel) and conventional trunking radios - Wireless microphones operating in any frequency range - Wireless in-ear-monitors (IEM) operating in any frequency range - Wireless intercom operating in any frequency range - Wireless cueing and/or interruptible foldback (IFB) operating in any frequency range - Assisted listening systems operating in any frequency range - Wireless video systems operating in any frequency range - Wireless programmable logic controllers (PLC) operating in any frequency range - Wireless data modems operating in any frequency range - Wireless automation control operating in any frequency range - Wireless lighting and DMX control operating in any frequency range - Wireless control of any type operating in any frequency range - Wireless access point/router (WAP / Wi-Fi) operating in any frequency range - Bi-directional amplifiers/systems for ESMR (Nextel)/cellular/PCS services - Microwave ovens - Any RF device operating in any frequency range not listed in “RF Transmission Equipment Exception List� 7 Any visiting production RF transmission equipment operating in the following frequency ranges are subject to prior coordination: -

100kHz - 806MHz 896MHz - 901MHz 902MHz - 930MHz 935MHz - 940MHz 944MHz - 952MHz 2400MHz - 2485MHz (2.4GHz - 2.485GHz) 5030MHz - 5350MHz (5.03GHz - 5.35GHz) 5470MHz - 5830MHz (5.47GHz - 5.83GHz)

8 RF Transmission Equipment Exception List: - Cellular (700/800/850MHz) and PCS (1700/1800/1900/2100MHz) [subscriber] phones - Wi-Fi wireless client devices, such as computers and PDAs. 9 The following template may be used to submit visiting production RF transmission equipment to Harris Theater Audio Department. Information sheets already composed by visiting production may be submitted so long as it contains the complete information as detailed in paragraph 5.

BACK TO TOP Harris Theater Technical Specifications Revised November 2011 Page 10 of 13


PYROTECHNICS & FIRE All facilities must apply for live flame (any open flame in a public space) or Pyrotechnic permits with the City of Pittsburgh Fire Bureau. Please advance with the Production Department.

CONSOLE LOCATIONS STAGE MANAGERS CONSOLE / VIDEO SUPPORT None available at this venue

ROAD CONSOLE Arrangements will be made through management on a show-to-show basis.

WARDROBE/LAUNDRY None available at this venue

DRESSING ROOMS Basement

(1) room with integral rest room & shower, partitionable, that can accommodate up to 6 performers.

REHEARSAL STUDIOS The Benedum Center for the Performing Arts 412-456-2600 has various size rehearsal rooms for rent.

BACK TO TOP Harris Theater Technical Specifications Revised November 2011 Page 11 of 13


STAGE RISERS / TABLES / PODIUMS / CHAIRS RISERS Not applicable at this location

TABLES Not applicable at this location

PODIUM Not applicable at this location

CHAIRS Not applicable at this location

CHAIN MOTORS / PERSONNEL LIFTS / LADDERS Not applicable at this location

ORCHESTRA PIT Not applicable at this location

DANCE EQUIPMENT Not applicable at this location

FOGGERS Not applicable at this location

BACK TO TOP Harris Theater Technical Specifications Revised November 2011 Page 12 of 13


PROJECTION SYSTEM (2)

Simplex 35mm projectors w/ strong super lumex lamp houses & strong power supply

(1) Ultra-stereo processor (2) QSC power amplifiers (1) Kelmar exciter supply (1) Component engineering co. MS-55 booth monitor (1) 16mm projector

WIRELESS INTERNET The Harris Theater does not provide this service.

BACK TO TOP Harris Theater Technical Specifications Revised November 2011 Page 13 of 13


Harris Theater Tech Specs