Page 1

Digital Design - Module 02 Semester 1, 2018 Cullen O’Brien

(910858) Joel Collins + Studio 19


Week Three

Reading: Kolerevic B. 2003. Architecture in the Digital Age

Kolerevic described three fundamental type of fabrication techniques in the reading. Outline the three techniques and discuss the potential of Computer Numeric Controlled fabrication with parametric modelling. (150 words max)

Advancements in technologies and processes has allowed for the ability to produce faster and more accurate models and prototypes. to more clearly convey the key elements and overall design of a product. Three techniques that have had great influence include 3D Printing, CNC Routing and Laser cutting. Each technique serving extremely different functions provide architects and designers to clearly and effectively communicate through visual representation.

2


Week Three

Surface Creation

The development of the above surfaces was achieved through the use of Rhino and Grasshopper modelling software. Lofting surfaces through the generation of lines created by through grasshopper has allowed for the generation of 4 unique combinations of surfaces, each with their own strengths and interesting factors, to be later represented through 3D paneling.

3


Week Four Panels & Waffle

Paneling was achieved through the generation of paneling grids and selective breps. The use of grasshopper software enabled the 3D paneling to be easily achieved and modified throughout the design process.

The interior structure was designed as a functional aspect of the design in order to give the design strength and stability as well as sturdy anchor points for the 3D paneling to stick to.

4


Week Four

Laser Cutting

Two sets of laser cutting files were produced in the generation of task one, Minimal efforts involved in “nesting� were required as the minimum material size exceeded the required surface area for both the waffle and exterior 3D panels. Panels were achieved through unrolling surfaces to creating 2D nets that can be folded to produce 3D Panels. By making 2D lines and separating each onto cut and etch layers I was able to clearly and effectively send information to the laser cutter which intern was able to cut the Waffle structure and exterior panels.

5


Week Five

Scripting was used to develop the task two design, Through exploring scaling and location through the use of attractor points and lines a unique design proposal was developed that enabled the clear demonstration of skill and knowledge of rhino and grasshopper.

6


Week Five

Isometric

The isometric as seen to the left was developed through a combination of software and function in order to produce and interesting and unique collaboration of structure and void, The method of boolean enabled the design to explore interesting shapes and internal structures. The lattice like internal support structure was developed through the generation of the structure as geometry before being Boolean from a simple sphere which was then manipulated through the grasshopper software to produce the design as seen. The spatial qualities in the interior and exterior spaces of the design creates interest and intrigue.

7


Week Six Task 01

Task 01 Matrix As seen above a range of interactions were developed in the process of producing the final design. each option provided the design with its own interests and challenges in physical modelling of the design. –

8


Week Six Task 02

Grid Manipulation

1.1

1.2

1.3

Key

1.4

{0,0,0}

{0,75,150}

Attractor / Control Points (X,Y,Z) Attractor / Control Curves

{50,100,150}

Grid Points {75,75,75}

{20,180,0}

{40,0,0}

{Point Attractors}

{150,0,0}

Sphere Transformation

2.1

{200,30,0} {Point Attractor}

2.2

{Point Attractor}

{Point Attractors}

2.3

2.4

{75,75,150}

{75,0,150}

{75,75,0} {75,0,0}

Cut Out Selection

{Point Attractor}

{Curve Attractors}

{Point Attractors}

{Random Attractors}

3.1

3.2

3.3

3.4

Task 02 Matrix As seen above, a range of design options were developed in order to produce the best design possible to clearly and effectively demonstrate the skills and knowledge associated with the development of the final 3D printed design. Clear emphasis was taken in the section at which the final cut would be taken from.

9


Week Six

Final Isometric Views

10


Appendix

Process

Generating the 150x150 bounding cube through grasshopper to create paneling surfaces.

Applying a paneling grid to the developed surfaces using curve attractors to stagger size and scaling of future 3D panels.

Producing surfaces using grasshopper script within cube using loft functions.

Scripting and selecting breps to be referenced as 3D panels.

Baked out surfaced developed from script. this will serve as the base of the 3D panels.

Applying the 3D panels to the paneling grid. based on the breps selected. Grasshopper scripting.

11


Appendix Process

Producing the internal waffle structure using scripting methods through grasshopper.

Unrolled 3D panels, ready to add tabs.

Baking out 3D panels to be later unrolled and turned into foldable surfaces.

Unrolled 3D surfaces with tabs separated into layers to be cut or etched by laser cutter.

Joining meshes to nerbs and unroll to create fordable 2D surfaces.

Internal waffle structure finished and ready to be converted to laser cutting file.

12


Appendix

Process

Setting out and layering of waffle structure laser cut file.

Generation through rhino and grasshopper of task 2 bounding cube volume.

Laser cut file to submit including waffle structure and 3D panels. ready to submit to FabLab.

Producing internal lattice structure to boolean from spheres used in grasshopper script.

Creation of presentation matrix. for task , illustrator.

Sphere with hollow internal lattice structure to be used in grasshopper.

13


Appendix Process

Script of task 2, showing scaling and attractors.

4 x Examples of possible design iterations used for presentation purposes.

Baked geometry of cube with spheres to be used for booleaning.

Altering line weights for presentation drawings inside illustrator software.

Making 2D baked geometry for presentation purposes, to be later exported to illustrator.

Rhino model of possible design proposal, 1/8 of cube.


Appendix

Process

Alternative method of boolean to produce interesting design proposal.

Importing STL file into maker-bot software to submit to NextLab.

Developed from above booleaning example, this design was used.

Final printing of task 2 ready to submit. Settings turned on to ensure layer thickness and supports are included. Creating waffle structure and 3D panels. For final prototype.

Making 2D with interior spaces converted from mesh to Nerb to increase detain in presentation drawings.

Creating waffle structure and 3D panels. For final prototype.

15

M2 journal  
M2 journal  
Advertisement