Some Tips in Purchasing
Snowboard Or Ski Helmets
Helmets are being used by more snowboarders and skiers. They significantly lessen head trauma if experiencing a plunge. Wearing this may be a legitimate life saver especially when undertaking a forested or rocky terrain. Buying a helmet is really a necessity, you will observe that in reality cool and good riders wear helmets. Helmets are the most essential protection of the head in the occurrence of accidents. Snowboarding or skiing accidents are not being asked for, but in order to avoid such accidents snowboard riders and skier must ensure their safety by using proper helmets. Snowboarding and skiing safety standards for helmet: Ski helmets must carry CE, ASTM or Snell RS-98 certification. Standards of ASTM have been decided by series of tests on models of helmets, including the test on the strength of the retention system of the helmet under simulated cold, hot and wet situations. This safety gear go through tests of numerous impacts as well as speed forces against several sections of the head covering in order to determine the capacity of the helmet in skiing accidents. Trends: Producers of helmets notice the increase in the utilization of helmets by snowboarders and skiers and they are appearing with modern types and designs with each season. The focal point is primarily in creating lighter, tougher and more stylish helmets in order to lessen the resistance from initial buyers. In addition to, helmet producers are trying to make helmets that can be utilized for numerous actions like climbing, cycling and skating aside from wake board riding. Essential steps in fitting: The most vital thing in purchasing helmet is the fact that it should properly fit your head. It must be comfortable and must offer the rider the most excellent protection. a) Measuring tape - The size of the helmet can be determined by the bounds of the head and measured by enclosing your head with tape measure. b) Putting on the helmet - Put the frontage of the head cover over your brows and then hold the two straps until it fits well. c) Check for breakage. Ensure that there will be no holes or breakage between lining of the helmet and your rear. Make sure also, that the rear of the helmet is not touching the back of your neckline. d) Snugness - it must fit comfortably and properly and if shaking, ones head must not move. e) Test for goggles - Try your favorite pair of snowboard or ski goggles and ensure that they properly fit in your helmet. Please take note that the manufacturers of helmets have diverse ideas in the shapes of human head. Even though the dimension may be accurate, the form of the this may not fit a specific shape of the skull. Ultimately, be sure to purchase appropriate helmet to be used during snowboarding or skiing.
Published on Jun 15, 2010
Published on Jun 15, 2010
Ski helmets must carry CE, ASTM or Snell RS-98 certification. Standards of ASTM have been decided by series of tests on models of helmets, i...