Page 1

OPTIMA Spraying Equipment Buyers’ GUIDE www.croplands.co.nz

EFFECTIVE JANUARY

2014


Introduction

Welcome Dear Customer We are proud to present our 2014 Optima Buyers Guide and trust you will find this edition a valuable resource not only for your own requirements but also as a fantastic reference and training tool. Croplands have been supplying high quality sprayers and components to a variety of markets now for more than 40 years. During that time we have grown considerably, driven by our desire to integrate the very best brands from around the globe into our own innovative local designs. Croplands prides itself on strong relationships at each level, from our suppliers to our distributors and of course our end users. We embrace feedback on new product opportunities and enhancements, to ensure we maintain our positive improvement focus. Our products are built with the user in mind; they are reliable, user friendly and ultimately provide great value for money.

Selling the product is only just the start. Croplands have built an impressive distribution network right around the country supported by our regional warehouses. We have an internal customer support team with an enormous amount of experience and knowledge upon which to call. So can be assured that you will be well looked after for any parts or product information. We would like to take this opportunity to thank you for considering our products and of course thank those who have purchased Croplands spraying equipment in the past. Yours Sincerely

Sean Mulvaney General Manager Croplands (Australasia)

Nozzles – make the right choice The nozzle is arguably the most important part of any sprayer. Spraywise is the umbrella brand name for all of Nufarm and Croplands knowledge and activities in application technology. Over the last eight years, Nufarm and Croplands have been leading the industry by working with farmers to optimise their spray application. Hundreds of Spraywise demonstrations have been held over the country, including nozzle workshops and dye nights. Spraywise has been instrumental in raising awareness of important application parameters

such as coarse spray qualities. The Spraywise objective is to increase operational flexibility and significantly reduce the incidence and risk of spray drift damage to our diversified crops, without compromising efficacy. Application is the vital link between chemical and equipment. No company is in a better position to optimise this process than Nufarm/Croplands. See page 77 for more information on nozzles and Spraywise.

Liquid Fertiliser Ready "LFR" means that this Croplands product has a pump and plumbing system specifically designed to handle liquid fertiliser through the appropriate nozzles to suit the application.

2

www.croplands.com.au

Photos are for illustrative purposes only. Prices and specifications are subject to change without notice. Prices effective January 2014. For indicative freight prices, see page 111.


 CONTENTS

Section 1��������������������� 6–32

Section 3������������������� 63–76

linkage sprayers���������������������� 6

Nozzle Bodies, filters and caps��������������������� 64

BOOMS��������������������������������������16 Trailed Sprayers���������������������� 20 CropPaks��������������������������������� 24 12 volt sprayers��������������������� 26 Tray-mount Sprayers������������� 28 Chemical mixers, Foam marker and foam concentrate������� 32 Section 2������������������� 33–62 Pumps��������������������������������������� 34 Manual Control Valves/Regulators����������������� 40 Pressure Relief Valves������������� 40 Centrifugal Pumps������������������41 Flojet pumps ��������������������������� 42 Shurflo Pump ������������������������� 44 Apex 12 volt pumps����������������� 45 Knapsack sprayers���������������� 46

Electric control kits, monitors and GPS system���� 66 Electric controls and valves������������������������������ 68 Electric and manual valve kits������������������ 69 Suction Filters and Pressure Filters����������������������� 70 Manual ball Valves����������������74 Agitators, lids and tank fittings������������������ 75 Tools for Accurate Spraying�����������������������������������76 Section 4������������������ 77–111 Nozzles����������������������������������� 77 Terms and conditions�������� 110 Freight policy������������������������ 111

DIESEL, ADBLUE UNITS���������������� 52 Spray Gun, Lances and hoses������������������������������� 56 Pressure Gauges�������������������� 57 Safety with Chemical Application����������������������������� 58 Firefighters����������������������������� 60 Grain storage and hay baling applications����������������61 Spray tanks����������������������������� 62

Photos are for illustrative purposes only. Prices and specifications are subject to change without notice. Prices effective January 2014. For indicative freight prices, see page 111.

Optima BUYERS’ GUIDE – JANUARY 2014

3


Croplands overview

Company Information Croplands is a subsidiary of Nufarm Ltd. Croplands Equipment is one of the largest suppliers of spraying equipment, components and accessories for spraying throughout Australia and New Zealand. Some products are now being sold into the Americas, South Africa and Europe. We sell some of the best products as recognised in the spraying industry – products such as the Pegasus Broadacre Trailing range, WEEDit detection sprayers

4

Key Suppliers the Quantum Mist™ for many horticultural applications, the Cropliner for tree crops, and the RoGator ® and SpraCoupe® range of self-propelled machines. For any information on these products, please feel free to call us on: Freecall Australia 1800 999 162, or Freecall New Zealand 0800 106 898, or email sales@croplands.co.nz

Quantum Mist™ range of horticultural sprayers for vine crops

Quantum Mist™ range of horticultural sprayers for tree crops

Pegasus range of trailed boomsprays for broadacre

WEEDit range of weed detecting sprayers

Cropliner range of airblast sprayers

RoGator range of self-propelled sprayers

www.croplands.com.au

Photos are for illustrative purposes only. Prices and specifications are subject to change without notice. Prices effective January 2014. For indicative freight prices, see page 111.


 Section 1

Linkage sprayers������������������ 6

Manual BOOMS������������������� 16

HYDRAULIC BOOMS��������������� 17

500 Linkage – Econo��������������������6

MBX Manual Fold Booms������������ 16

Hydraulic Folding GEX Booms����� 17

500 Linkage��������������������������������8

Manual Folding Cropmaster Booms��������������������� 16

Hydraulic and BDU Booms���������� 18

700 Linkage������������������������������ 10

Firebreak, Under Tree and Covered Booms������������������� 19

1000 Linkage���������������������������� 12 1100 | 1300 | 1600 Linkage�������� 14

Manual Folding Acremaster Booms��������������������� 17

Trailed Sprayers����������������� 20

12 Volt Sprayers����������������� 24

Tray-Mount Models����������� 28

300 Trailed Sprayer�������������������20 1100 | 1500 Pony Trailed Sprayers�������������������������22

30 | 60 | 100 CropPak����������������24

200 | 400 Tray-Mount�����������������28

40 APEX CropPak����������������������25 200 | 400 CropPak��������������������25

500 Tray-Mount (with Frame)�������29

Wheely Boom��������������������������� 19

CropMister 500�������������������������29

70 Litre ATV Sprayer������������������26 30 Litre Apex Trolley Sprayer ������26 50 Litre Greens Model����������������26

1100 | 1500 Tray-mount Models����������� 30

RetraSpray Retractable Reel sprayers ���������������������� 31

Chemical Handling and foam markers������������ 32 Chemical Mixers������������������������32 Foam Marker and Foam Concentrate������������������������������32

Photos are for illustrative purposes only. Prices and specifications are subject to change without notice. Prices effective January 2014. For indicative freight prices, see page 111.

Optima BUYERS’ GUIDE – JANUARY 2014

5


Section 1



Linkage sprayers

500 linkage – Econo

Quick Guide »» Height adjustable controller mount »» Calibrated tank with clear volume markings »» Rugged steel hose reel with 20 metres of high quality hose and adjustable spray pattern gun »» Rear mounted pump to protect pump from damage and to give the PTO shaft more sliding overlap

NEW

»» Fully protected suction filter with shutoff valve for easy cleaning »» Large filling lid with strainer »» Nozzles are fully protected on all booms to avoid damage »» Booms are fully hot-dip galvanised for corrosion protection »» Left and right boom wings have a spring-loaded breakaway system to help avoid damage »» Stainless steel boom tubing with nondrip nozzle bodies (MBX series booms) »» Translucent white UV stabilised poly tank – see tank level at a glance »» Fully galvanised frame with heavy-duty boom mounts »» Easy access drain system for quick draining and cleanout

Specifications

Did you know? All Croplands linkage units have a through shaft, this gives the benefit of a longer PTO shaft, a rear mounted pump and a baffled tank.

All Croplands booms fitted with AirMix® air-induction nozzles as standard.

Tank

White polyethylene UV stabilised

Frame

Heavy-duty hot-dipped galvanised frame

Hitch points

Category I and II Linkage mounts

Pump

AR positive displacement, oil bath diaphragm pump fitted, PTO drive (shaft supplied)

Filtration

3 point filtration: basket strainer 18 mesh; large suction strainer with auto shut-off 80 mesh; nozzle strainers 100 mesh

Controller

GR30 manual control, pressure adjustment, one tap for boom shutoff and one for hose reel

Optional equipment

See opposite page

Note: booms may be shipped unattached to linkage frame to minimise freight cost. ORDER CODE

6

DESCRIPTION – Standard MoDels

$ (EX. GST)

PROD. CAT.

LA500/252

500 litre Agripak linkage sprayer; AR252 pump, ARGR30 2-way controller, hose reel (no reel or gun)

2,495.00

X

LA500/252R

500 litre Agripak linkage sprayer; AR252 pump, ARGR30 2-way controller, hose reel, 20 metres of 10mm hose and RL10 gun (no boom)

2,915.00

X

LA500/252/4B

500 litre Agripak linkage sprayer; AR252 pump, ARGR30 2-way controller, hose reel, 20 metres of 10mm hose, RL10 gun and 4 metre MBX boom fitted

3,995.00

X

LA500/252/4B-U

500 litre Agripak linkage sprayer; AR252 pump, ARGR30 2-way controller fitted.Hose reel, 20 metres of 10mm hose, RL10 gun and 4 metre MBX boom supplied but not fitted. (note – to fit boom and reel will take approx 45–60 minutes, instructions supplied). See page 111 for freight savings

3,895.00

X

www.croplands.com.au

Photos are for illustrative purposes only. Prices and specifications are subject to change without notice. Prices effective January 2014. For indicative freight prices, see page 111.


Section 1

Linkage sprayers

500 linkage – Econo Options Ideal for smaller farm enterprises, orchards and vineyards.

Booms

MSCL-2 shown narrow 2.3 metres

MSCL-2 shown wide 3 metres ORDER CODE

DESCRIPTION

PROD. CAT.

page

MBX06-1

6 metre MBX manual folding boom

$ (EX. GST) 1.050.00

X

16

MSCL-2

Double-sided shielded boom fitted – ideal for vineyard applications (pictured above)

1,258.20

X

19

XP Boomkit XP BoomKit – kit for clamping to rear of quad bike or linkage sprayer to mount boomless nozzles*. XP BoomJets need to be purchased separately and fitted to the XP BoomKit. Ensure you order the correct size of XP BoomJet to match the flow capability of your pump. As a guide, the size 10 (B¼XP10L or R-VP) is the only suitable size for 12 volt Flojet pump applications.

XP BoomKit with XP BoomJets* fitted, shown mounted on quad bike. Approximate spray width of 6 metres. *Nozzles sold separately.

See page 96 for details and pricing on XP BoomJets.

ORDER CODE

DESCRIPTION

LT-XPBOOMKIT

XP BoomJet, left and right, fitted to the rear of the 500 Econo linkage using the XPBOOMKIT and bracket. Size B1/4XP20L and R nozzles are used for an output of 13 L/min at 2 bar pressure giving a sprayed width of approximately 7 metres. An ideal choice for hill country or liquid fertiliser applications.

$ (EX. GST) 299.00

PROD. CAT. X

Hand wash tank and foam marker

Another great safety feature is a hand-wash tank for use in the field. A foam marker is vital to in pasture to see where you have been.

ORDER CODE

DESCRIPTION

LT-20

20 litre hand-wash tank and brackets (fitted)

A5200052

Double sided foam marker fitted

$ (EX. GST) PROD. CAT. Page 350.00

X

1,495.00

X

32

Electric controls ORDER CODE

DESCRIPTION

LT-LA-IE2012A

Single switch electric control kit fitted for boom shut-off. Boom section control is still available by using the manual taps

Photos are for illustrative purposes only. Prices and specifications are subject to change without notice. Prices effective January 2014. For indicative freight prices, see page 111.

$ (EX. GST) PROD. CAT. Page 775.00

X

66

Optima BUYERS’ GUIDE – JANUARY 2014

7


Section 1



Linkage sprayers

500 linkage

Quick Guide »» Height adjustable controller mount »» Calibrated tank with clear volume markings »» Rugged steel hose reel with 30 metres of high quality hose and adjustable spray pattern gun

New Pump

»» Rear mounted pump to protect pump from damage and to give the PTO shaft more sliding overlap »» Fully protected suction filter with shutoff valve for easy cleaning »» Large filling lid with strainer »» Nozzles are fully protected on all booms to avoid damage »» Booms are fully hot-dip galvanised for corrosion protection »» Left and right boom wings have a spring-loaded breakaway system to help avoid damage »» Stainless steel boom tubing with nondrip nozzle bodies (MBX series booms) »» Translucent white UV stabilised poly tank – see tank level at a glance

Did you know?

»» Fully galvanised frame with heavy-duty boom mounts

All Croplands linkage units have a through shaft, this gives the benefit of a longer PTO shaft, a rear mounted pump and a baffled tank.

»» Easy access drain system for quick draining and cleanout

Specifications All Croplands booms fitted with AirMix® air-induction nozzles as standard.

Tank

White polyethylene UV stabilised

Frame

Heavy-duty hot-dipped galvanised frame

Hitch points

Category I and II Linkage mounts

Pump

AR positive displacement, oil bath diaphragm pump fitted, PTO drive (shaft supplied)

Filtration

3 point filtration: basket strainer 18 mesh; large suction strainer with auto shut-off 80 mesh; nozzle strainers 100 mesh

Controller

UCM manual 4 way pressure relief valve with pressure adjustment and master on/off

Optional equipment

See opposite page

Note: booms may be shipped unattached to linkage frame to minimise freight cost.

8

DESCRIPTION – Standard Models

LP0500

500 litre linkage tank and frame only

1,846.00

X

LA500

500 litre Agripak linkage sprayer; AR80 pump, UCM 4-way controller (no hose reel or boom)

3,580.00

X

LA500/80

500 litre Agripak linkage sprayer; AR80 pump, UCM 4-way controller, hose reel, 30 metres of 10mm hose and Turbo 400 gun (no boom)

4,107.00

X

LA500/30

500 litre Agripak linkage sprayer; AR30 medium pressure (0–40 bar) pump and ARGI40 2-way controller. (No hose reel or boom. Suitable for higher pressure applications)

4,107.00

X

LA500/80/6B

500 litre Agripak linkage sprayer; AR80 pump, UCM 4-way controller, hose reel, 30 metres of 10mm hose, Turbo 400 gun and 6 metre MBX boom

5,243.00

X

LA500/80/6B-U

500 litre Agripak linkage sprayer; AR80 pump, UCM 4-way controller fitted. Hose reel, 30 metres of 10mm hose, Turbo 400 gun and 6 metre MBX boom supplied but not fitted. (Note – to fit boom and reel will take approximately 45–60 minutes, instructions supplied). See page 111 for freight savings

5,143.00

X

LA500/813/MVB4-4

500 litre Agripak Sprayer with AR813 pump, ARVDR50 controller and Vertiboom with 4 nozzles per side

5,243.00

X

LA500/813/MVB5-5

As above with 5-nozzle per side vertiboom fitted

5,343.00

X

www.croplands.com.au

$ (EX. GST)

PROD. CAT.

ORDER CODE

Photos are for illustrative purposes only. Prices and specifications are subject to change without notice. Prices effective January 2014. For indicative freight prices, see page 111.


Section 1

Linkage sprayers

500 linkage Options Booms

Booms up to 10 metres are suitable for the 500 litre Linkage sprayer. Add your choice of boom options from the table below to the 500 base unit suitable for your needs – refer page 8.

ORDER CODE

DESCRIPTION

$ (EX. GST) PROD. CAT. Page

MF06

6 metre Cropmaster boom

1,456.13

X

16

MF08

8 metre Cropmaster boom

1,795.00

X

16

MF10

10 metre Cropmaster boom

2,160.00

X

16

MSCL-2

Double-sided shield-spray boom – ideal for vineyard applications

1,258.20

X

19

BOFLS

Adjustable boom end nozzle with manual shut-off for fenceline spraying

108.30

X

19

Lift device and airbag suspension kits

Airbag suspension can protect booms from wear and tear – an excellent option to extend the life of your boom. Hydraulic lift devices are very useful in crops or pastures with varying heights.

ORDER CODE

DESCRIPTION

LT-GB383899000V Single airbag suspension for 8 and 10 metre booms LT-GBBG019802

800mm hydraulic lift device for boom lift. Requires one set of tractor remotes. Hydraulic hoses with fittings supplied to tractor

$ (EX. GST) PROD. CAT. Page 2,500.00

X

9

1,950.00

X

9

Chemical mixing and induction units

A chemical mixing and induction hopper can make a huge difference to the safety of the operator. Add this pricing to the 500 base unit.

ORDER CODE

DESCRIPTION

A5032130-KIT

30 litre chemical mixing and induction hopper fitted

$ (EX. GST) PROD. CAT. Page 1,895.00

X

32

Hand wash tank and foam marker

Another great safety feature is a hand-wash tank for use in the field. A foam marker is vital to in pasture to see where you have been.

ORDER CODE

DESCRIPTION

LT-20

20 litre hand-wash tank and brackets (fitted)

A5200052

Double sided foam marker fitted

$ (EX. GST) PROD. CAT. Page 350.00

X

1,495.00

X

32

Electric controls ORDER CODE

DESCRIPTION

LT-LA-IE2012A

Single switch electric control kit fitted for boom shut-off. Boom section control is still available by using the manual taps

LT-LA-IE2032W

3-section remote in-cab control system for wireless shut-off for 3 boom sections

$ (EX. GST) PROD. CAT. Page 775.00

X

66

2,495.00

X

66

IdROMinus Manual control ORDER CODE

DESCRIPTION

LT-ARIDROM-4

Idrominus compensating regulator in lieu of ARUCM-4

$ (EX. GST) PROD. CAT. Page 442.00

X

40

Larger pump model

Larger pump model suitable for the 500 litre linkage listed below. Add this pricing to the 500 base unit suitable for your needs – refer page 8.

ORDER CODE

DESCRIPTION

LT-AR115-C

AR115 (115 L/min, 0–20 bar) pump in lieu of AR80 pump

$ (EX. GST) PROD. CAT. Page 425.00

X

34

Boomless nozzle in lieu of a boom

Boomless nozzle options in lieu of a boom – ideal for hilly country or for simple liquid fertiliser application. The 5880 BoomJet requires the LA500 with AR80 or 115 pump.

ORDER CODE

DESCRIPTION

LT-XPBOOMKIT

XP BoomJet, left and right, fitted to the rear of the 500 linkage using the XPBOOMKIT and bracket. Size B1/4XP20L and R nozzles are used for an output of 13 L/min at 2 bar pressure giving a sprayed width of approximately 7 metres. An ideal choice for hill country or liquid fertiliser applications.

299.00

X

7

LT-5880KIT

Larger brass 5880 BoomJet nozzle fitted for higher liquid applications. Includes TeeJet 5880 series double-sided BoomJet and bracket to suit. Select suitable size – see nozzle section for more detail

815.00

X

96

Photos are for illustrative purposes only. Prices and specifications are subject to change without notice. Prices effective January 2014. For indicative freight prices, see page 111.

$ (EX. GST) PROD. CAT. Page

Optima BUYERS’ GUIDE – JANUARY 2014

9


Section 1



Linkage sprayers

700 linkage

Quick Guide »» Height adjustable controller mount

New Pump

»» Calibrated tank with clear volume markings »» Rugged steel hose reel with 30 metres of high quality hose and adjustable spray pattern gun »» Rear mounted pump to protect pump from damage and to give the PTO shaft more sliding overlap »» Fully protected suction filter with shutoff valve for easy cleaning »» Large filling lid with strainer »» Nozzles are fully protected on all booms to avoid damage »» Booms are fully hot-dip galvanised for corrosion protection »» Left and right boom wings have a spring-loaded breakaway system to help avoid damage »» Stainless steel boom tubing with nondrip nozzle bodies (Cropmaster and MHL series booms) »» Translucent white UV stabilised poly tank – see tank level at a glance

LA700/80/8F

»» Fully galvanised frame with heavy-duty boom mounts »» Easy access drain system for quick draining and cleanout

Did you know?

Specifications

All hose used on Croplands sprayers is very high quality and made to Croplands specifications, with added longitudinal fibres to avoid stretching and 15% more nitrile for chemical resistance.

Tank

Heavy-duty hot-dipped galvanised frame

Frame

Category I and II Linkage mounts

Hitch points

AR positive displacement, oil bath diaphragm pump fitted, PTO drive (shaft supplied)

Pump

3 point filtration: basket strainer 18 mesh; large suction strainer with auto shut-off 80 mesh; nozzle strainers 100 mesh

Filtration

UCM manual 4 way pressure relief valve with pressure adjustment and master on/off

Controller

See opposite page

Optional equipment

See opposite page

All Croplands booms fitted with AirMix® air-induction nozzles as standard.

10

DESCRIPTION – Standard MoDels

LP0700

700 litre linkage tank and frame only

2,308.00

X

LA700

700 litre Agripak linkage sprayer; AR80 pump, UCM 4-way controller (no hose reel or boom)

3,995.00

X

LA700/80

700 litre Agripak linkage sprayer; AR80 pump, UCM 4-way controller, hose reel, 30 metres of 10mm hose and Turbo 400 gun (no boom)

4,252.00

X

LA700/80/8F

700 litre Agripak linkage sprayer; AR80 pump, UCM 4-way controller, hose reel, 30 metres of 10mm hose, Turbo 400 gun and 8 metre Cropmaster boom

6,047.00

X

LA700/80/8F-U

700 litre Agripak linkage sprayer; AR80 pump, UCM 4-way controller fitte. Hose reel, 30 metres of 10mm hose, Turbo 400 gun and 8 metre Cropmaster boom supplied but not fitted. (Note – to fit boom and reel will take approx 45–60 minutes, instructions supplied). See page 111 for freight savings

5,947.00

X

www.croplands.com.au

$ (EX. GST)

PROD. CAT.

ORDER CODE

Photos are for illustrative purposes only. Prices and specifications are subject to change without notice. Prices effective January 2014. For indicative freight prices, see page 111.


Section 1

Linkage sprayers

700 linkage Options Booms

Booms up to 12 metres are suitable for the 700 litre Linkage sprayer. Add your choice of boom options from the table below to the 700 base unit suitable for your needs – refer page 10. For detailed information on each boom, use the page reference at right.

ORDER CODE

DESCRIPTION

MF10

10 metre Cropmaster boom

$ (EX. GST) PROD. CAT. Page 2,160.00

X

16

MF12

12 metre Cropmaster boom

2,795.00

X

16

MA10

10 metre Acremaster boom

3,547.50

X

17

MA12

12 metre Acremaster boom

3,722.00

X

17

MHL12

12 metre Hydralink hydraulic-fold boom, complete with hydraulic hose kit

9,995.00

X

18

MHL12-2-KIT

Second set of hydraulic hoses to allow left/right individual fold of MHL boom (text on your order)

595.00

X

18

BOFLS

Adjustable boom end nozzle with manual shut-off for fenceline spraying

108.30

X

19

Lift device and airbag suspension kits

Airbag suspension can protect booms from wear and tear – an excellent option to extend the life of your boom. Hydraulic lift devices are very useful in crops or pastures with varying heights.

ORDER CODE

DESCRIPTION

LT-GB383899000V Single airbag suspension for 10 and 12 metre booms

$ (EX. GST) PROD. CAT. Page 2,500.00

X

LT-GBBG019802

800mm hydraulic lift device for boom lift. Requires one set of tractor remotes. Hydraulic hoses with fittings supplied to tractor

1,950.00

X

LT-GB360589000V

1,200mm hydraulic lift device for boom lift. Requires one set of tractor remotes. Hydraulic hoses with fittings supplied to tractor

2,795.00

X

Chemical mixing and induction units

A chemical mixing and induction hopper can make a huge difference to the safety of the operator. Add this pricing to the 700 base unit.

ORDER CODE

DESCRIPTION

$ (EX. GST) PROD. CAT. Page

A5032130-KIT

30 litre chemical mixing and induction hopper fitted

1,895.00

X

32

L-H9351A-KIT

60 litre chemical mixing and induction hopper fitted

2,100.00

X

32

Hand wash tank and foam marker

Another great safety feature is a hand-wash tank for use in the field. A foam marker is vital to in pasture to see where you have been.

ORDER CODE

DESCRIPTION

LT-20

20 litre hand-wash tank and brackets (fitted)

A5200052

Double sided foam marker fitted

$ (EX. GST) PROD. CAT. Page 350.00

X

1,495.00

X

32

Electric controls ORDER CODE

DESCRIPTION

LT-LA-IE2012A

Single switch electric control kit fitted for boom shut-off. Boom section control is still available by using the manual taps

LT-LA-IE2032W

3-section remote in-cab control system for wireless shut-off for 3 boom sections

$ (EX. GST) PROD. CAT. Page 775.00

X

66

2,495.00

X

66

Idrominus Manual control and Triplex nozzles ORDER CODE

DESCRIPTION

LT-ARIDROM-4

Idrominus compensating regulator in lieu of ARUCM-4

BT-TRIPLEX

Triplex nozzle bodies complete with AirMix Jets in sizes 110 #02, 025, 03. Price is per nozzle required on the selected boom

$ (EX. GST) PROD. CAT. Page 442.00

X

40

74.00

X

64

Larger pump model

Larger pump model suitable for the 500 litre linkage listed below. Add this pricing to the 500 base unit suitable for your needs – refer page 6.

ORDER CODE

DESCRIPTION

LT-AR140-C

AR140-LFP (140 L/min, 0–20 bar) pump in lieu of AR80 pump

$ (EX. GST) PROD. CAT. Page 425.00

X

34

Boomless nozzle in lieu of a boom

Boomless nozzle options in lieu of a boom – ideal for hilly country or for simple liquid fertiliser application. The XP BoomJet option is suitable for the LA500/20 model. The 5880 BoomJet requires the LA700 with AR80 or 115 pump.

ORDER CODE

DESCRIPTION

LT-XPBOOMKIT

XP BoomJet, left and right, fitted to the rear of the 700 linkage using the XPBOOMKIT and bracket. Size B1/4XP20L and R nozzles are used for an output of 13 L/min at 2 bar pressure giving a sprayed width of approximately 7 metres. An ideal choice for hill country or liquid fertiliser applications.

299.00

X

7

LT-5880KIT

Larger brass 5880 BoomJet nozzle fitted for higher liquid applications. Includes TeeJet 5880 series double-sided BoomJet and bracket to suit. Select suitable size – see nozzle section for more detail

815.00

X

96

Photos are for illustrative purposes only. Prices and specifications are subject to change without notice. Prices effective January 2014. For indicative freight prices, see page 111.

$ (EX. GST) PROD. CAT. Page

Optima BUYERS’ GUIDE – JANUARY 2014

11


Section 1



Linkage sprayers

1000 linkage

Quick Guide »» Height adjustable controller mount »» Calibrated tank with clear volume markings »» Rugged steel hose reel with 30 metres of high quality hose and adjustable spray pattern gun »» Rear mounted pump to protect pump from damage and to give the PTO shaft more sliding overlap »» Fully protected suction filter with shutoff valve for easy cleaning »» Large filling lid with strainer »» Nozzles are fully protected on all booms to avoid damage »» Booms are fully hot-dip galvanised for corrosion protection »» Left and right boom wings have a spring-loaded breakaway system to help avoid damage »» Stainless steel boom tubing with nondrip nozzle bodies (Cropmaster and MHL series booms) »» Translucent white UV stabilised poly tank – see tank level at a glance

LA1000/80/10F

Did you know? All Croplands tanks have a high proportion of UV inhibitor added to protect from sun degradation and have a nominal thickness of 4mm for excellent strength.

»» Fully galvanised frame with heavy-duty boom mounts All Croplands booms fitted with AirMix® air-induction nozzles as standard.

»» Easy access drain system for quick draining and cleanout »» Forklift points on bottom frame rails to assist with loading/unloading from a vehicle »» Folding access step fitted for safety »» Integrated handwash tank standard

Specifications Tank

White polyethylene UV stabilised

Frame

Heavy-duty hot-dipped galvanised frame

Hitch points

Category II and III Linkage mounts

Pump

AR positive displacement, oil bath diaphragm pump fitted, PTO drive (shaft supplied)

Filtration

3 point filtration: basket strainer 18 mesh; large suction strainer with auto shut-off 80 mesh; nozzle strainers 100 mesh

Controller

UCM manual 4 way pressure relief valve with pressure adjustment and master on/off

Optional equipment

See opposite page

LA1000 with MA10 boom

ORDER CODE

12

DESCRIPTION – Standard MoDels

$ (EX. GST)

PROD. CAT.

LP01000

1000 litre linkage tank and frame only

3,185.00

X

LA1000

1000 litre Agripak linkage sprayer; AR80 pump, UCM 4-way controller, (no hose reel or boom)

5,650.00

X

LA1000/80

1000 litre Agripak linkage sprayer; AR80 pump, UCM 4-way controller, hose reel, 30 metres of 10mm hose, Turbo 400 gun (no boom)

6,177.00

X

LA1000/80/10F

100 litre Agripak linkage sprayer; AR80 pump, UCM 4-way controller, hose reel, 30 metres of 10mm hose, Turbo 400 gun and 10 metre Cropmaster boom

8,290.00

X

www.croplands.com.au

Photos are for illustrative purposes only. Prices and specifications are subject to change without notice. Prices effective January 2014. For indicative freight prices, see page 111.


Section 1

Linkage sprayers

1000 linkage Options Booms

Booms up to 15 metres are suitable for the 1000 litre Linkage sprayer. Add your choice of boom options from the table below to the 1000 base unit suitable for your needs – refer page 12. For detailed information on each boom, use the page reference at right.

ORDER CODE

DESCRIPTION

MF12

12 metre Cropmaster boom

$ (EX. GST) PROD. CAT. Page 2,795.00

X

16

MA10

10 metre Acremaster boom

3,547.50

X

17

MA12

12 metre Acremaster boom

3,722.00

X

17

MHL12

12 metre Hydralink hydraulic-fold boom, complete with hydraulic hose kit

9,995.00

X

18

MHL15

15 metre Hydralink hydraulic-fold boom, complete with hydraulic hose kit

10,955.00

X

18

MHL12-2-KIT

Second set of hydraulic hoses to allow left/right individual fold of MHL boom (text on your order)

595.00

X

BOFLS

Adjustable boom end nozzle with manual shut-off for fenceline spraying

108.30

X

19

Lift device and airbag suspension kits

Airbag suspension can protect booms from wear and tear – an excellent option to extend the life of your boom. Hydraulic lift devices are very useful in crops or pastures with varying heights.

ORDER CODE

DESCRIPTION

LT-GB383899000V Single airbag suspension for 10, 12 and 15 metre booms

$ (EX. GST) PROD. CAT. Page 2,500.00

X

LT-GBBG019802

800mm hydraulic lift device for boom lift. Requires one set of tractor remotes. Hydraulic hoses with fittings supplied to tractor

1,950.00

X

LT-GB360589000V

1,200mm hydraulic lift device for boom lift. Requires one set of tractor remotes. Hydraulic hoses with fittings supplied to tractor

2,795.00

X

Chemical mixing and induction units

A chemical mixing and induction hopper can make a huge difference to the safety of the operator. Add this pricing to the 1000 base unit.

ORDER CODE

DESCRIPTION

A5032130-KIT

30 litre chemical mixing and induction hopper fitted

$ (EX. GST) PROD. CAT. Page 1,895.00

X

32

L-H9351A-KIT

60 litre chemical mixing and induction hopper fitted

2,100.00

X

32

Foam marker and GPS GUIDANCE

A foam marker is vital to in pasture to see where you have been, or choose the GPS Guidance unit for more accuracy.

ORDER CODE

DESCRIPTION

A5200052

Double sided foam marker fitted

$ (EX. GST) PROD. CAT. Page 1,495.00

X

32

RV117-0171-429

Raven Cruizer GPS with Helix antenna – ready to go

4,550.00

W

66

Electric controls ORDER CODE

DESCRIPTION

1.LT-LAIE2012A

Single switch electric control kit fitted for boom shut-off. Boom section control is still available by using the manual taps

2.LT-LAIE2032W 3.LT-LA-IE2052W

$ (EX. GST) PROD. CAT. Page 775.00

X

66

3-section remote in-cab control system for wireless shut-off for 3 boom sections

2,495.00

X

66

5-section remote in-cab control system for wireless shut-off for 5 boom sections

2,795.00

X

66

Manual control and Triplex nozzles ORDER CODE

DESCRIPTION

LT-ARIDROM-4

Idrominus compensating regulator in lieu of ARUCM-4

BT-TRIPLEX

Triplex nozzle bodies complete with AirMix Jets in sizes 110 #02, 025, 03. Price is per nozzle required on the selected boom

$ (EX. GST) PROD. CAT. Page 442.00

X

40

74.00

X

64

Larger pump model

Larger pump model suitable for the 1000 litre linkage listed below. Add this pricing to the 1000 base unit suitable for your needs – refer page 12.

ORDER CODE

DESCRIPTION

LT-AR140-C

AR140-LFP (140 L/min, 0–20 bar) pump in lieu of AR80 pump

$ (EX. GST) PROD. CAT. Page 425.00

X

34

Boomless nozzle in lieu of a boom

Boomless nozzle options in lieu of a boom – ideal for hilly country or for simple liquid fertiliser application.

ORDER CODE

DESCRIPTION

LT-5880KIT

Larger brass 5880 BoomJet nozzle fitted for higher liquid applications. Includes TeeJet 5880 series double-sided BoomJet and bracket to suit. Select suitable size – see nozzle section for more detail

Photos are for illustrative purposes only. Prices and specifications are subject to change without notice. Prices effective January 2014. For indicative freight prices, see page 111.

$ (EX. GST) PROD. CAT. Page 815.00

X

96

Optima BUYERS’ GUIDE – JANUARY 2014

13


Section 1



Linkage sprayers

1100 | 1300 | 1600 linkage

Quick Guide »» Calibrated and UV stabilised poly tank with sight tube and litres marked »» Epoxy paint used on all frame components, baked to a high quality finish »» Stabiliser legs fitted to the fame to keep unit safe from tipping when parked »» Fully protected pump mounted beneath the tank for excellent suction and safety »» Fully protected large suction filter with shut-off valve for easy cleaning »» Large filling lid with strainer »» Nozzles are fully protected on all booms to avoid damage »» Stainless steel boom tubing with non-drip nozzle bodies »» Easy access drain system for quick draining and cleanout »» Forklift points on bottom frame rails to assist with loading/unloading from a vehicle »» Integrated 1,000mm hydraulic lift device »» Integrated handwash tank standard »» Integrated 170 litre Flushing tank standard »» 30 litre chemical mixer/induction unit standard »» Clothing and glove locker »» Folding access step for safety »» Large pump standard »» All Croplands booms fitted with AirMix ® air-induction nozzles as standard

14

$ (EX. GST)

PROD. CAT.

1100 litre linkage base unit with AR160 PTO-drive diaphragm pump. In cab electric 3-section control unit, flushing and hand wash tank. 1,000mm integrated hydraulic height adjuster. 30 litre chemical mixer fitted. Choose boom option from page 15

11,990.00

W

LPMEC1300/160

1300 litre linkage base unit with AR160 PTO-drive diaphragm pump. In cab electric 3-section control unit, flushing and hand wash tank. 1,000mm integrated hydraulic height adjuster. 30 litre chemical mixer fitted. Choose boom option from page 15

12,490.00

W

LPMEC1600/160

1600 litre linkage base unit with AR160 PTO-drive diaphragm pump. In cab electric 3-section control unit, flushing and hand wash tank. 1,000mm integrated hydraulic height adjuster. 30 litre chemical mixer fitted. Choose boom option from page 15

13,150.00

W

ORDER CODE

DESCRIPTION – Base models (no boom)

LPMEC1100/160

www.croplands.com.au

Photos are for illustrative purposes only. Prices and specifications are subject to change without notice. Prices effective January 2014. For indicative freight prices, see page 111.


Section 1

Linkage sprayers

1100 | 1300 | 1600 linkage Options Booms

Booms up to 18 metres are suitable for the 1100/1300/1600 litre Linkage sprayer. Add your choice of boom options from the table below to the base unit suitable for your needs – refer page 14. For more detailed information on each boom, use the page reference at right.

ORDER CODE

DESCRIPTION

$ (EX. GST) PROD. CAT. Page

MHL12-MEC

12 metre galvanised Hydralink hydraulic-fold boom, complete with hydraulic hose kit

8,995.00

W

18

MHL15-MEC

15 metre galvanised Hydralink hydraulic-fold boom, complete with hydraulic hose kit

9,995.00

W

18

MHL12-2-KIT

Second set of hydraulic hoses to allow left/right individual fold of MHL boom (text on your order)

595.00

W

LT-HYDHT-SUS

Hydraulic accumulator suspension for hydraulic lift

874.50

W

BDU18-MEC

18 metre BDU series concertina-fold powder-coated boom, fully hydraulic fold with individual left and right fold options. Self-locking self levelling device. Includes a 1,200mm lift in lieu of 1,000mm. Requires 2 sets remotes – one for lift, a second set with an electric diverter valve (supplied) for operating the tilt ram and fold function

16,995.00

W

18

BDU18-4-KIT

Extra electric/hydraulic function with in-cab switchbox for individual left/right boom folding

600.00

W

Controls

Electric controls, Auto rate controllers and electric fenceline options.

ORDER CODE

DESCRIPTION

LT-LA-IE2052

5-section remote in-cab control system for shut-off for 5 boom sections in lieu of standard 3-section

BRAVO180ARAG3

$ (EX. GST) PROD. CAT. Page 395.00

W

Bravo 180 auto rate controller with 3 boom sections for fully automatic spray rate control

3,950.00

W

BRAVO180ARAG5

Bravo 180 auto rate controller with 5 boom sections for fully automatic spray rate control

4,150.00

W

BTEF-TEEJET

12 volt fence line kit comes with B¼XP BoomJet

235.00

W

19

BTEF-TEEJETLH

As above for left hand side

235.00

W

19

GPS GUIDAnce

GPS Guidance unit for more accuracy in your field – does away with a foam marker.

ORDER CODE

DESCRIPTION

RV117-0171-429

Raven Cruizer GPS with Helix antenna – ready to go

$ (EX. GST) PROD. CAT. Page 4,550.00

W

66

Triplex nozzles ORDER CODE

DESCRIPTION

BT-TRIPLEX

Triplex nozzle bodies complete with AirMix Jets in sizes 110 #02, 025, 03. Price is per nozzle required on the selected boom

$ (EX. GST) PROD. CAT. Page 74.00

W

64

Pumps

Hydraulic pump drive for the 1100/1300/1600 litre linkage sprayer.

ORDER CODE

DESCRIPTION

LP-HYD

Hydraulic drive option for the pump in lieu of PTO drive – includes hydraulic hoses to the tractor

Photos are for illustrative purposes only. Prices and specifications are subject to change without notice. Prices effective January 2014. For indicative freight prices, see page 111.

$ (EX. GST) PROD. CAT. Page 1,550.00

W

35

Optima BUYERS’ GUIDE – JANUARY 2014

15


Section 1

BOOMS

MBX Manual Fold BOOMS NEW

Quick Guide »» Rugged, galvanised steel construction »» Nozzles are protected being placed above the boom rail »» Stainless steel boom tubes for added strength and durability »» Non-drip nozzles bodies with AirMix ® low-drift nozzles fitted

MBX4-1

MBX6-1

»» Adjustable tension spring breakaway for each boom arm to ensure the arm returns to position »» Folds neatly behind the sprayer or vehicle (not the MB02 which is fixed)

MBX6-1

MBX4-1

ORDER CODE

DESCRIPTION

MB02

One piece 2 metre boom with 4 non-drip nozzles at 500mm spacings

$ (EX. GST) PROD. CAT. 308.00

X

MBX03-1

3 metre galvanised boom; 6 non-drip nozzles at 500mm spacings. 1.2 metres folded width. Ideal for RTV’s, small sprayers and utes

699.00

X

MBX04-1

4 metre galvanised boom; 8 non-drip nozzles at 500mm spacings. 1.2 metres folded width. Ideal for RTV’s, small sprayers and utes

799.00

X

MBX06-1

6 metre galvanised boom; 12 non-drip nozzles at 500mm spacing. Suitable for linkage sprayers, vehicles and traymount sprayers

1,050.00

X

ATVBOOMKIT

Mounting kit to allow fitting of the MBX booms to vehicle trays and RTV’s

146.50

X

Manual folding Cropmaster BooMS Cropmaster MF08 boom shown folded (left) and open (below)

Quick Guide »» Galvanised steel construction »» Nozzles protection fitted to outer sections »» Stainless steel boom tubes for added strength and durability »» Non-drip nozzles bodies with AirMix ® low-drift nozzles fitted »» Adjustable tension spring breakaway for each boom arm »» Folds neatly behind the sprayer or vehicle

AirMix® low drift airinduction nozzles fitted as standard on all booms

ORDER CODE

DESCRIPTION

MF06

6 metre Cropmaster boom

$ (EX. GST) PROD. CAT. 1,456.13

X

MF08

8 metre Cropmaster boom

1,795.00

X

MF10

10 metre Cropmaster boom

2,160.00

X

MF12

12 metre Cropmaster boom

2,795.00

X

Booms shown on sprayers for illustration purposes only. Prices are for booms only.

16

www.croplands.com.au

Photos are for illustrative purposes only. Prices and specifications are subject to change without notice. Prices effective January 2014. For indicative freight prices, see page 111.


BOOMS Section 1

Manual folding Acremaster BOOMS

Quick Guide »» Heavy duty galvanised steel construction »» Nozzles are protected being placed above the boom rail

AirMix® low drift air-induction nozzles fitted with nozzle protection as standard (not shown)

»» Non-drip nozzles bodies with AirMix ® low-drift nozzles fitted »» Adjustable tension spring breakaway for each boom arm »» Ideal boom for larger linkages and larger areas – a proven performer over many years

Acremaster MA10 boom shown folded (left) and open (below)

ORDER CODE

DESCRIPTION

MA10

10 metre galvanised Acremaster boom

3,547.50

X

MA12

12 metre galvanised Acremaster boom

3,722.00

X

Hydraulic folding GEX Booms AirMix® low drift air-induction nozzles fitted with nozzle protection as standard (not shown)

$ (EX. GST) PROD. CAT.

Quick Guide »» Galvanised steel construction »» Nozzles protection fitted to outer sections »» Stainless steel boom tubes with nondrip nozzles bodies and AirMix ® lowdrift nozzles fitted »» Adjustable tension spring breakaway for each boom arm »» Boom folds hydraulically in a cross-fold style. Note: the 8 and 10 metre models have a manual flip-over outer section which needs to be manually secured in the folded position prior to folding the boom for transport »» Ideal boom for small row-cropping situations or vegetables

GEX10H boom shown folded (above) and open (left) ORDER CODE

DESCRIPTION

GEX6H

6 metre galvanised hydraulic folding boom; 12 non-drip nozzle bodies, 2 rams for folding, hydraulically plumbed to fold together.

$ (EX. GST) PROD. CAT. 5,020.15

X

GEX8H

8 metre galvanised hydraulic folding boom; 16 non-drip nozzle bodies, 2 rams for folding, hydraulically plumbed to fold together. 1 metre of each end is manually unfolded to make the boom 8 metres.

6,990.00

X

GEX10H

10 metre galvanised hydraulic folding boom; 20 non-drip nozzle bodies, 2 rams for folding, hydraulically plumbed to fold together. 2 metres of each end is manually unfolded to make the boom 10 metres.

7295.00

X

MHL12-2-KIT

Second set of hydraulic hoses to allow left/right individual fold of GEX boom (text on your order)

595.00

X

Booms shown on sprayers for illustration purposes only. Prices are for booms only.

Photos are for illustrative purposes only. Prices and specifications are subject to change without notice. Prices effective January 2014. For indicative freight prices, see page 111.

Optima BUYERS’ GUIDE – JANUARY 2014

NEW

17


Section 1

BOOMS

Hydraulic Hydralink Booms

Quick Guide »» Heavy duty galvanised steel construction »» Nozzles protection fitted to protect nozzles and nozzle bodies from damage

AirMix® low drift air-induction nozzles fitted with nozzle protection as standard

»» Stainless steel boom tubes with nondrip nozzles bodies and AirMix ® lowdrift nozzles fitted

MHL15 boom shown folded (right) and open (below)

»» Adjustable tension breakaway on outer sections »» Self-leveling centre section standard »» Boom folds sequentially in a cross-fold style for transport – using the left/ right hydraulic kit option, each side can be lifted independently which also automatically locks the self-leveling system. Ideal for lifting over fences at the headland or irrigation sprinklers »» Ideal boom for small row-cropping, vegetables or undulating farm country

ORDER CODE

DESCRIPTION

MHL12

Heavy duty galvanised 12 metre hydraulic folding boom with 24 nozzles, twin ram with auto folding tips, hydraulically plumbed to fold both sides together. Central self-locking self-leveller standard

$ (EX. GST) PROD. CAT. 9,995.00

X

MHL15

Heavy duty galvanised 15 metre hydraulic folding boom with 30 nozzles, twin ram with auto folding tips, hydraulically plumbed to fold both sides together. Central self-locking self-leveller standard

10,995.00

X

MHL12-2-KIT

Second set of hydraulic hoses to allow left/right individual fold of MHL boom

595.00

X

NEW

Booms shown on sprayers for illustration purposes only. Prices are for booms only.

BDU Booms

Quick Guide »» Heavy duty epoxy-painted steel construction »» Nozzles and nozzle bodies protected to avoid accidental breakage during spraying »» Stainless steel boom tubes with nondrip nozzles bodies and AirMix ® lowdrift nozzles fitted »» Adjustable tension breakaway on outer sections »» Self-leveling centre section standard »» Boom folds sequentially in a concertina style for transport – using the left/right hydraulic kit option, each side can be folded independently »» Ideal boom for larger areas – note: only suitable for fitting to Croplands MEC 1100/1300. Hydraulic height adjustment is highly recommended and airbag suspension for rougher country

BDU18

18

ORDER CODE

DESCRIPTION

BDU18

18 metre BDU series concertina-fold powder-coated boom, fully hydraulic fold with individual left and right fold options. Self-locking self levelling device. Includes a 1,200mm lift device as part of the package. Requires 2 sets remotes – one for lift, a second set with an electric diverter valve (supplied) for operating the tilt ram and fold function

BDU18-4-KIT

Extra electric/hydraulic function with in-cab switchbox for individual left/right boom folding

www.croplands.com.au

$ (EX. GST) PROD. CAT. 16,995.00

W

600.00

W

Photos are for illustrative purposes only. Prices and specifications are subject to change without notice. Prices effective January 2014. For indicative freight prices, see page 111.


BOOMS Section 1

Firebreak, Under tree and covered booms

Quick Guide Firebreak boom: »» Ideal for the back of utes or small trailing sprayers »» 1.5 metre wide with offset nozzles on adjustable swivel nozzle bodies on each end for additional 1.5 metre spray each side »» For spraying firebreaks, farm tracks, contours, ditches and fencelines Under-tree boom: MSO

MC6 Firebreak Boom shown fitted to tray MSCL-2 shown wide 3 metres

»» Galvanised boom with breakaway – extendable outer section with 2 nozzles, can be lifted up for transport »» Perfect for spraying under trees or hedgerows Shrouded booms: »» Single or double sided options for sensitive areas »» For spraying under sensitive crops such as grapes, trellis tomatoes and the like

MSCL-2 shown narrow 2.3 metres ORDER CODE

DESCRIPTION

MC6

1.5 metre wide firebreak boom. For more information see page 28

455.20

X

MSO

Treeliner boom with breakaway and 2 nozzles with manual-tap shut-off

471.65

X

MSCL

Single sided light covered boom with breakaway and 2 nozzles under spray shield

842.90

X

MSCL-2

Double sided light covered boom with left/right shielded booms with breakaways, adjustable width, and a 600mm wide uncovered centre section with 2 nozzles

1,258.20

X

MSCL-BRUSH

Brush kit to suit MSCL boom. 2 required for the MSCL-2. Price is for brush kit only, boom price must be added

227.50

X

Wheely Boom

$ (EX. GST) PROD. CAT.

Quick Guide »» Ideally suited for greens, golf courses and turf applications »» Handle includes a shut-off gun and gauge for the operator to control the application as required »» Ideal to hook up to an existing spray pump for spraying greens

ORDER CODE

DESCRIPTION

MW02

2 metre width boom with frame and wheels, shut-off gun and gauge

$ (EX. GST) PROD. CAT. 1,112.40

OPTIONS

X

BOFLS

Fenceline nozzle kits

For spraying around fencelines or drains from the end of a boom, choose from a manual-tap or electric fenceline nozzle kit.

ORDER CODE

DESCRIPTION

BOFLS

Adjustable boom end nozzle with manual shut-off for fenceline spraying

108.30

X

BTEF-TEEJET

12 volt fence line kit comes with B¼XP BoomJet, 400mm of wiring. To suit ½” boom tube. (RH side)

235.00

X

BTEF-TEEJETLH

As above for left hand side

235.00

X

Photos are for illustrative purposes only. Prices and specifications are subject to change without notice. Prices effective January 2014. For indicative freight prices, see page 111.

$ (EX. GST) PROD. CAT.

BTEF-TeeJet

Optima BUYERS’ GUIDE – JANUARY 2014

19


Section 1

Trailed sprayers

300 Trailed Sprayer

Quick Guide »» Translucent UV-stabilised tank with large sump and graduated markings

NEW

»» 10 metre hose with high quality spray lance »» Large, easy access lid with filling strainer »» 12 volt pump, matched to the application, with easy access suction filter and regulator for flow adjustment »» Safety hitch for safe towing »» Flotation tyres on sturdy axle »» Rugged, one-piece chassis »» Handy parking stand On models with a boom fitted:

UA300/8/2B

»» AirMix ® air-induction low drift nozzles fitted standard »» Fully protected non-drip nozzle bodies on stainless steel boom tubes »» Spring-loaded breakaways to protect boom arms from accidental impact damage (except model with 2 metre boom which is fixed)

Boomless nozzle kit during application

UA300/15/XPKIT

NEW

AirMix® low drift air-induction nozzles fitted with nozzle protection as standard (not shown)

UA300/15/4B

20

www.croplands.com.au

Photos are for illustrative purposes only. Prices and specifications are subject to change without notice. Prices effective January 2014. For indicative freight prices, see page 111.


Section 1

Trailed sprayers

Croplands trailed 300 litre sprayers are a very popular option for block-holders and small farms all over Australia and New Zealand. Models include our 12 volt range with or without a boom, and the motorised versions with an AR diaphragm pump for spot spraying, nursery use and for use with the Vertiboom on small vineyards. The sturdy frame has a tow-hitch fitted. Boom options Vertiboom which can be fitted using a motorised pump (AR30-5H) fitted on the drawbar with the boom rear mounted

Another useful option on the UA300 trailed is the double-sided covered boom for use in small vineyards. The boom is fitted to the rear of the US300 trailed using a 20 L/min 12 volt pump

UA300/20/HR30G

NEW

UA300/20S/6B Accessories Page Ref

DESCRIPTION

UA300

Trailer with hitch and 300 litre tank only – no pump, boom or gun

2,145.00

X

UA300/15

Trailing 300 litre sprayer: 15 L/min 12 volt pump, regulator kit, 10 metre 10mm hose, spray lance and hose holder – ideal spot sprayer

2,616.60

X

27

UA300/8/2B

Trailing 300 litre sprayer: 7.6 L/min 12 volt pump, regulator kit, 10 metre 10mm hose, spray lance, 2 metre fixed boom

2,995.00

X

27

UA300/15/4B

Trailing 300 litre sprayer: 15 L/min 12 volt pump, regulator kit, 10 metre 10mm hose, spray lance, 4 metre MBX boom

3,668.50

X

27

UA300/20S/6B

Trailing 300 litre sprayer: 20 L/min 12 volt pump, regulator kit, 10 metre 10mm hose, spray lance, 6 metre MBX boom

3,999.00

X

27

UA300/20S/ MSCL-2

Trailing 300 litre sprayer: 20 L/min 12 volt pump, regulator kit, 10 metre 10mm hose, spray lance, MSCL-2 covered boom fitted

4,950.00

X

27

UA300/15/XPKIT

Trailing 300 litre sprayer; 15 L/min 12 volt pump, regulator kit, 10 metres of 10mm hose with lance and hose holder, XP boom kit with left and right XP BoomJets (#10 size) fitted

3,375.00

X

27

UA300/20/HR30G

Honda powered AR252 pump fitted on the front of trailed 300 litre sprayer with 30 metres of 10mm hose on steel hose reel and RL10 spray lance

5,373.50

X

UA300/20/100RC

Honda powered AR252 pump fitted on the front of trailed 300 litre sprayer with RetraSpray remote control reel fitted

6,995.00

X

UA300/30/MVB4-4

Trailing 300 litre sprayer with Honda GX200 powered AR30 pump (0–40 bar) and 4-nozzle per side Vertiboom. Ideal for small horticultural growers

5,680.10

X

Photos are for illustrative purposes only. Prices and specifications are subject to change without notice. Prices effective January 2014. For indicative freight prices, see page 111.

$ (EX. GST)

PROD. CAT.

ORDER CODE

Optima BUYERS’ GUIDE – JANUARY 2014

21


Section 1

Trailed sprayers

1100 | 1500 pony Trailed Sprayers

Quick Guide »» Remote tank drain valve, for safe tank draining »» Huge sump to ensure all tank liquid can be utilised »» Large, easy access filling lid with filling strainer »» Easy access suction filter with shut-off to allow cleaning in-field if needed »» Suction probe for safe chemical induction from the ground »» Fully galvanised chassis provides superior protection for today’s agricultural environment »» Sprung axle fitted to protect chassis and boom from premature wear »» 11.5/80 x 15.3 tubeless agricultural tyres on steel rims »» Adjustable height swivel towing eye »» Large side step for easy tank access »» Liquid fertiliser ready Poly 3-diaphragm pump fitted standard (PTO shaft supplied)

BT-1100 shown with MA10 boom and electic controller options

»» Options include a range of booms (next page), foam marker, electric or auto rate spray controls, hydraulic boom lift device, airbag boom suspension, Honda-powered motorised pumps

Specifications

22

Tank

Translucent white UV stabilised tank with calibrated markings. Large, hinged filling lid with basket strainer. Venturi and bypass agitation. 20 litre handwash tank fitted

Chassis

Galvanised one-piece box-section multi-rail chassis with adjustable and swivel tow-hitch. Step provided for top fill access

Booms (optional)

Up to 12 metres, fully galvanised with single non-drip nozzle bodies and AirMix Air-induction nozzles fitted

Filtration

Triple filtration – lid strainer, suction filter, nozzle filters (and pressure filter with electric controls)

Wheels

11.5/80 x 15.3 tubeless tyres on steel rims, spring axle fitted as standard

Pumps

Standard AR80 (80 L/min, 0–20 bar) oil-bath triple-diaphragm pump, PTO drive. Other options, page 23

Controls

Standard with ARUCM manual 4 way pressure relief valve with pressure adjustment and master on/off lever. Optional electric controls see page 23

$ (EX. GST)

PROD. CAT.

Pony trailed sprayer; 1100 litre tank, galvanised chassis, leaf-spring single axle, AR80 PTO driven triple-diaphragm pump (0–20 bar), ARUCM 4 tap manual control unit, 20 litre handwash tank and suction probe. (NO boom fitted)

11,665.00

X

As above, but with 1500 litre tank

12,890.00

X

ORDER CODE

DESCRIPTION

BT-1100 BT-1500

www.croplands.com.au

Photos are for illustrative purposes only. Prices and specifications are subject to change without notice. Prices effective January 2014. For indicative freight prices, see page 111.


Section 1

Trailed sprayers

Options

Raven Cruizer GPS

Foam marker

AR140LFP Poly pump

Airbag suspension

1,200mm hydraulic lift device

Wireless electric control

Booms

A full range of galvanised booms can be fitted to the Pony

ORDER CODE

DESCRIPTION

PROD. CAT.

Page

BT-MF08

8 metre Cropmaster boom

$ (EX. GST) 1,795.00

X

16

BT-MF10

10 metre Cropmaster

2,160.00

X

16

BT-MF12

12 metre Cropmaster boom

2,795.00

X

16

BT-MA10

10 metre Acremaster boom

3,547.50

X

17

BT-MA12

12 metre Acremaster boom

3,722.00

X

17

BTGEX6H

6 metre GEX series hydraulic fold boom

5,020.15

X

17

BTGEX8H

8 metre GEX series hydraulic fold

6,990.00

X

17

BTGEX10H

10 metre GEX series hydraulic fold

7,295.00

X

17

Pump options ORDER CODE

DESCRIPTION

BT-AR140LFP-C

AR140 pump in lieu of AR80 pump (PTO drive)

BT-AR70-5H

AR70 Honda powered motorised pump in lieu of AR80 PTO-drive

$ (EX. GST)

PROD. CAT.

Page

425.00

X

34

2,340.00

X

34

Lift devices and airbag suspension ORDER CODE

DESCRIPTION

PROD. CAT.

Page

BT-GB380599000V

Self-levelling device with manual lock for Acremaster and GEX series booms. A useful option for undulating ground

$ (EX. GST) 1,680.00

X

BT-HYDHGT800

800mm hydraulic lift device for boom lift. Requires one set of tractor remotes. Hydraulic hoses with fittings supplied to tractor. Includes support struts to chassis. Suitable for MF series booms

3,350.00

X

BT-HYDHGT

(Previous code BT-GB350196000V) 1,200mm hydraulic boom height adjuster with side support struts and hydraulic hose kit for adjusting boom height from the tractor. Suitable for Acremaster (MA) series booms

3,695.00

X

BT-GB383899000V

Single airbag suspension for Acremaster 10 and 12 metre booms. Ideal for rougher country

2,500.00

X

Electric controls, spray rate controllers, foam marker and GPS options ORDER CODE

DESCRIPTION

PROD. CAT.

Page

A5200052

Double sided foam marker fitted

1,495.00

X

32

LT-LA-IE2032W

3-section remote in-cab control system for wireless shut-off for 3 boom sections

2,495.00

X

66

MTSMATE-ARAG3

3-section auto rate controller for control of 3 boom sections with automatic spray rate control of application rate using flow and speed inputs from the sprayer

4,995.00

X

67

BRAVO180-ARAG3

Bravo 180 auto rate controller with 3 boom sections for fully automatic spray rate control

5,995.00

X

67

BRAVO180-ARAG5

Bravo 180 auto rate controller with 5 boom sections for fully automatic spray rate control

6,350.00

X

Photos are for illustrative purposes only. Prices and specifications are subject to change without notice. Prices effective January 2014. For indicative freight prices, see page 111.

$ (EX. GST)

Optima BUYERS’ GUIDE – JANUARY 2014

23


Section 1

12 volt sprayers

30 | 60 | 100 CropPak 6

4 8

3

10 2

Feature

Benefit

1 Cavity mounted pump

Total protection against the elements and damage. Low pump position ensures excellent priming

2 Translucent tank

Easy to see liquid level in the tank

2 Rugged design, locally made

Rotomolded tank has uniform thickness and can take high impact force

2 UV stabilised tank

Excellent UV resistance. Many imported models have no UV inhibitor in the material

3 Large carry handles

Easy handling and for storing hose neatly

4 Lance clips onto lid

Ensures neat storage and avoids lance dragging on the ground

4 Large filling lid

Helps prevent spillage when filling

7

5 Large suction filter, Very large filtering area with easyclean filter screen. Simple and easy access quick to access

1

6  3-stage filtration

Large filling screen under lid; large suction filter; pressure filter in lance handle

7 Quick-clip power connection

High quality electrical connector to the pump with waterproof plug for quick hook up and reliability

8 Metal lance with adjustable nozzle

Superior to plastic, higher strength. Many accessories available to fit the lance – page 48

9 Large drain

Easy-to-use, large ‘boat plug’ drain for quick clean-out

10 6 metre hose

6 metres of high quality 20 bar rated spray hose fitted

Heavy-duty power cable

Long, heavy-duty 12 volt power lead with rocker-switch for easy hook-up to your battery

US60

5

9

Did you know? The lance fitted to all Croplands CropPak sprayers can be fitted to a huge range of accessories such as small booms, spray guards, extendable lances, long lances – check out the range on page 48 to see these options.

US100A US60

US30A 30/60/100 litre CropPak sprayers – completely redesigned for 2014 with many improvements to better suit the Australian and New Zealand market. Small details make a big difference to the performance of these sprayers, especially compared to the large number of imported units on the market. Compare the features above and you will find these CropPaks excellent value for money and will last for years if looked after. On page 27 you will find a wide range of accessories available for use with the standard lance to make your purchase of a Croplands CropPak a worthwhile investment. Please ensure your vehicle’s load rating can carry the sprayer you want before making your purchase.

24

PROD. CAT.

Accessories Page Ref

450.00

X

27

60 litre CropPak, on-demand 7.6 L/min open-flow pump, 6 metres of spray hose, spray lance and electrical power lead with on/off switch

550.00

X

27

US100A

100 litre CropPak, on-demand 7.6 L/min open-flow pump, 6 metres of spray hose, spray lance and electrical power lead with on/off switch

650.00

X

27

US100A/15

100 litre CropPak, on-demand 15 L/min open-flow pump, pressure regulator and gauge, 6 metres of spray hose, spray lance and electrical power lead with on/off switch

755.00

X

27

ORDER CODE

DESCRIPTION

US30A

30 litre CropPak, on-demand 7.6 L/min open-flow pump, 6 metres of spray hose, spray lance and electrical power lead with on/off switch

US60

www.croplands.com.au

$ (EX. GST)

Photos are for illustrative purposes only. Prices and specifications are subject to change without notice. Prices effective January 2014. For indicative freight prices, see page 111.


Section 1

12 volt sprayers

40 APEX CropPak

Quick Guide

Integrated measuring jug

»» 40 litre tank »» 4 metre hose »» 3 L/min pump with protection cover »» Heavy duty power cable »» On/off pump switch »» Integrated measuring jug »» Large filling lid

NEW ORDER CODE

DESCRIPTION

$ (EX. GST)

ASATV-10

40 litre Apex CropPak sprayer, 4 metres hose, protected pump with on/off switch, measuring jug, heavy duty powercable

200 | 400 CropPak 7

9

5 4

6

8

PROD. CAT.

350.00

Y

Feature

Benefit

1  Baffled tank

Integrated baffles to avoid sudden liquid movement

2 Graduated, translucent tank

Easy to see liquid level in the tank with level marks

2 Rugged design, locally made

Rotomolded tank has uniform thickness and can take high impact force

2  UV stabilised tank

Excellent UV resistance. Many imported models have no UV inhibitor in the material

Quick Guide Ensures safe handling

3  Carry handles

2

»» These flat-based 200/400 units 4 Lance clips Ensures neat litre storage and avoids lance on the ground are a great choice fordragging a higher onto lid

capacity utility sprayer. Helps prevent spillage when filling

4  Large filling lid

»» They will sit on a ute tray, RTV tray,

5 Handy suction Easy-clean filter screen. Simple tractor tray or trailer. and quick to access filter, easy access

»» The clever design includes cutaways Large filling screen under lid; in the tank to provide to avoid suctionbaffles filter; pressure filter in sudden liquid movement – a must if lance handle being used on sloping country.

3

1

6 3-stage filtration

US200/15

7 Metal lance with Superior to plastic, higher accessories adjustable nozzle »» There are severalstrength. modelsMany available to cater for differentavailable uses. to fit the lance – page 21

Did you know? New for 2014 is a higher pressure 200 litre model ideal for spot spraying woody weeds and for pest control around buildings.

200 and 400 litre CropPaks – These flat-based 200/400 litre units are a great choice for a higher capacity utility sprayer. They will sit on a ute tray, RTV tray, tractor tray or trailer. The clever design includes cutaways in the tank to provide baffles to avoid sudden liquid movement – a must if being used on sloping country. There are several models available to cater for different uses.

8  6 metre hose

6 metres of high quality 20 bar rated spray hose fitted

9 Hose holders mounted on tank

To wrap hose around to avoid tangles and dragging hose

Heavy-duty power cable

Long, heavy-duty 12 volt power lead with rocker-switch for easy hook-up to your battery

Quick-clip power connection

High quality electrical connector to the pump with waterproof plug for quick hook up and reliability

PROD. CAT.

Accessories Page Ref

890.00

X

27

990.00

X

27

200 litre CropPak, on-demand 5.5 L/min high pressure open-flow pump, 6 metres of spray hose, RL10 gun and electrical power lead with on/off switch

1,190.00

X

27

(Not pictured) 400 litre CropPak, 12 volt 15 L/min Triplex pump with pressure adjusting regulator fitted, 6 metres hose and adjustable spray lance. Accessories available such as small booms – see page reference at right

1,550.00

X

27

ORDER CODE

DESCRIPTION

US200

200 litre CropPak, on-demand 7.6 L/min open-flow pump, 6 metres of spray hose, spray lance and electrical power lead with on/off switch

US200/15

200 litre CropPak, on-demand 15 L/min open-flow pump, pressure regulator and gauge. 3-way valve enables connection to a boom. 6 metres of spray hose standard with spray lance. Electrical power lead with on/off switch provided

US200/5.5HP (NEW) US400/15

Photos are for illustrative purposes only. Prices and specifications are subject to change without notice. Prices effective January 2014. For indicative freight prices, see page 111.

$ (EX. GST)

Optima BUYERS’ GUIDE – JANUARY 2014

25


Section 1

12 Volt sprayers

70 Litre ATV Sprayer

Quick Guide »» Wrap-around tank for low centre of gravity »» Large filling lid with strainer »» Handy tool box with lid »» High quality wiring loom with rugged waterproof connectors and integrated on/off rocker switch »» 6 metres spray hose supplied »» High quality spray lance with adjustable nozzle »» Full range of accessories for spray lance – see page 27

UM70 shown mounted on quad bike.

PROD. CAT.

Accessories Page Ref

734.25

X

27

70 litre CropPak, 12 volt 15 L/min Triplex pump with pressure adjustment regulator fitted, large filling lid, 6 metre hose and adjustable spray lance, pre-plumbed for boom

870.40

X

27

UM70/15/3B

70 litre CropPak, 12 volt 15 L/min Triplex pump with pressure adjustment regulator fitted, large filling lid, 6metre hose and adjustable spray lance and 3 metre boom kit

1,830.10

X

27

UM70/15/4B

70 litre CropPak, 12 volt 15 L/min Triplex pump with pressure adjustment regulator fitted, large filling lid, 6metre hose and adjustable spray lance and 4 metre boom kit

1,912.60

X

27

ORDER CODE

DESCRIPTION

$ (EX. GST)

UM70

70 litre CropPak, 12 volt on-demand 7.6 L/min Triplex pump, large filling lid, 6 metre hose and adjustable spray lance

UM70/15

30 Litre Apex Trolley Sprayer

Quick Guide »» 3 L/min (open flow) 12 volt diaphragm pump powered by a large lead/acid rechargeable battery (charger included) »» Large filling lid »» Large drain for emptying and complete cleanout »» Spray lance with adjustable nozzle

ORDER CODE

DESCRIPTION

AT-30M3

30 litre trolley sprayer with 3 L/min pump (open-flow), 10 metre hose and Reel

$ (EX. GST) PROD. CAT. 470.00

50 Litre Greens Model

Y

»» 10 metres of hose on handy rearmounted reel »» Sturdy steel frame

Quick Guide »» Battery included »» This little beauty has a 2 metre boom and comes with non-drip nozzle bodies and nozzles »» 10 metres of hose and a lance »» Lance and boom all operated with a 12 volt pump from the battery supplied »» 3 wheels provide excellent manoeuvrability for turf or bowling green spraying

26

ORDER CODE

DESCRIPTION

UW50/2B

Three-wheeled greens sprayer, 50 litre, 12 volt on-demand 7.6 L/min Triplex pump, large filling lid, 10 metre hose, adjustable spray lance and 2 metre boom. Includes battery

www.croplands.com.au

$ (EX. GST) 2,659.25

PROD. CAT. X

Photos are for illustrative purposes only. Prices and specifications are subject to change without notice. Prices effective January 2014. For indicative freight prices, see page 111.


Section 1

12 Volt sprayers

12 volt sprayer options XP Boomkit XP BoomKit – kit for clamping to rear of quad bike or linkage sprayer to mount boomless nozzles*. XP BoomJets need to be purchased separately and fitted to the XP BoomKit. Ensure you order the correct size of XP BoomJet to match the flow capability of your pump. As a guide, the size 10 (B¼XP10L or R-VP) is the only suitable size for 12 volt Flojet pump applications.

XP BoomKit with XP BoomJets* fitted, shown mounted on quad bike. Approximate spray width of 6 metres. *Nozzles sold separately.

See page 96 for details and pricing on XP BoomJets.

ORDER CODE

DESCRIPTION

XPBOOMKIT

Kit to mount 2 XP BoomJets* for a sprayed width of approximately 6 metres. Minimum pump flow required 6.4 L/min at 2 bar pressure. Clamps supplied for fitting to rear carrier of most quad bikes *NOTE: XP BoomJets NOT included. See page 56 to select ¼” XP BoomJet to suit

$ (EX. GST) PROD. CAT. 99.00

X

Pressure regulator kit ORDER CODE

DESCRIPTION

UOPRK

Pressure regulator kit for use with most 12 volt pumps such as Flojet and Shurflo. Ideal for regulating pressure and flow when a small spray boom is being used

$ (EX. GST) PROD. CAT. 123.35

X

Boom mounting kit

To mount a boom to a ute-tray, RTV vehicle or similar, a boom mount kit is available to suit the MBX 3 and 4 metre booms. Kit includes brackets, bolts and u-clamps to suit. Ideal for use with our CropPak models such as the US100A/15 or US200/15 that have the larger pump fitted.

ORDER CODE

DESCRIPTION

ATVBOOMKIT

Mounting kit for 3 and 4 metre MBX series booms. Only suitable for CropPaks with larger 15/17.5 or 20 L/min (open-flow) 12 volt pumps.

$ (EX. GST) PROD. CAT. 146.50

X

Spray Lance accessories for CropPaks

The Lance fitted to all 12 volt CropPak models (except the high pressure 5.5 model) can be hooked up to a very handy range of accessories SW219-151C

SW219-138C

SW219-148C

SW219-099

SW219-140C SW219-146C SW219-143C

ORDER CODE

DESCRIPTION

SW219-236C

Telescopic lance to 940mm, with adjustable nozzle

21.30

SW219-099

Herbicide spray guard, 400mm large

12.11

Y

SW219-117

Herbicide spray guard, 220mm small

8.86

Y

SW219-142C

Spray lance 1,000mm, plastic, including adjustable nozzle

21.45

Y

SW219-143C

Spray lance 1,500mm, plastic, including adjustable nozzle

27.66

Y

SW219-146C

Spray lance 2,000mm, plastic, including adjustable nozzle

34.19

Y

SW219-147C

Double “U” nozzle, plastic

20.52

Y

SW219-140C

2-nozzle boom 500mm, plastic

24.09

Y

SW219-148C

2-nozzle boom, 750mm, plastic

28.27

Y

SW219-138C

3-nozzle boom 1,000mm, plastic

33.42

Y

SW219-151C

3-nozzle boom 1,500mm, plastic

39.63

Y

SW219-282C

4-nozzle boom 1,500mm, plastic

52.53

Y

Photos are for illustrative purposes only. Prices and specifications are subject to change without notice. Prices effective January 2014. For indicative freight prices, see page 111.

$ (EX. GST)

PROD. CAT.

Optima BUYERS’ GUIDE – JANUARY 2014

Y

27


Section 1

Tray-mount

200 | 400 Tray-mount

Quick Guide

(no frame)

»» Baffled tank to avoid sudden shift of liquids »» Flat base for use on a vehicle tray, tractor tray or trailer »» Large drain for easy flushing »» Genuine Honda motor to power the reliable AR diaphragm pump »» Steel hose reel with galvanised mount, 30 metres of high quality hose and Turbo 400 gun

US400/30/HR30TG

Pictured above: A typical set up for the US200/20/HR16G with an optional RTV boom kit and 4 metre MBX boom fitted. At right (top): The same unit in action spraying with the boom. At right (bottom): The US200/20/HR16G fitted with a firebreak boom showing the available spray pattern options using the left, centre and right configurations – ideal for firebreaks, tracks, contours, fencelines, driveways, around yards and also turf applications. ORDER CODE

28

DESCRIPTION

$ (EX. GST)

PROD. CAT.

US200/20/HR16G

CropPak 200 with GX120 Honda-powered AR252 pump, retractable reel, 16 metre hose and RL10 gun

3,685.50

X

US400/30/HR30TG

CropPak 400 with AR30 0–40 bar pump, reel with 30 metres of 10mm hose and Turbo 400 gun

4,405.50

X

www.croplands.com.au

Photos are for illustrative purposes only. Prices and specifications are subject to change without notice. Prices effective January 2014. For indicative freight prices, see page 111.


Tray-mount Section 1

500 tray-mount

(with frame)

NEW

Quick Guide »» Heavy duty hot-dip galvanised frame with carry handles »» Round, UV-stabilised tank with level markings »» Large filling lid with basket strainer »» Large sump for total emptying and easy draining and cleanout »» Genuine Honda motor to power the reliable AR diaphragm pump »» Steel hose reel with galvanised mount, 30 metres of high quality hose and Turbo 400 gun

US500/30/HR30TG

US500/30/100RC

»» 12 volt remote rewind reel option for effortless spraying and high productivity »» For weed spraying, sheep jetting, firefighting, water carting and pest control »» Optional boom mount and booms for AR70 model (up to 10 metre) »» Dimensions: W = 1,075mm L = 1,650mm H (to top of tank) = 1,020mm

US500/30/TWIN $ (EX. GST)

PROD. CAT.

ORDER CODE

DESCRIPTION

US500/30/HR30TG

CropPak 500 litre, AR30 pump, reel with 30 metre hose and Turbo Gun, galvanised skid-frame

5,494.50

X

US500/30/TWIN

US500/30/HR30TG as above, with twin reels

5,805.25

X

US500/30/100RC

CropPak 500 litre, comes with RetraSpray RSRL-100RC reel (see page 31)

8,625.00

X

US500/70/HR30TG

CropPak 500 litre, AR70 pump, reel with 30 metre hose and Turbo Gun, galvanised skid-frame. AR 70 pump is ideal for use with a range of booms – see page reference at right for options on how to mount a boom to your vehicle tray

5,494.50

X

CropMister 500

Quick Guide »» Honda GX160 (3.6kW) powered AR252 (25 L/min) pump »» Galvanised frame »» Misting fan »» The Cropmister is fitted with belts and clutch to allow the mister to be operated independently of the pump. »» This unit can be used with the fan engaged for misting operations, or disengaged for spot spraying or firefighting applications. »» Ideal for insecticide application for control of locusts, red-legged earth mite and similar insect pests. »» Electric actuator on the spray outlet included.

All models BSM500/20 ORDER CODE

DESCRIPTION

BSM500/20

Cropmister 500 litre on skid-frame, comes with 25 L/min pump, misting fan and electric actuator adjustment

Photos are for illustrative purposes only. Prices and specifications are subject to change without notice. Prices effective January 2014. For indicative freight prices, see page 111.

$ (EX. GST) 8,170.25

Optima BUYERS’ GUIDE – JANUARY 2014

PROD. CAT. X

29


Section 1

tray-mount

1100 | 1500 Tray-mount

Quick Guide

Croplands has designed, and will have available in April 2014, a new range of tray-mount sprayers for small trucks capable of carrying between 1200kg and 2 tonnes. This new range has been designed to carry the tank across the tray to keep weight roughly in the vehicle centre (near the cab), whilst allowing sufficient space at the rear for boom brackets to extend over the rear of the tray along with a platform for a pump, spray reels and other accessories. The frame will be galvanised steel with forklift guides on the sides to allow for mounting and demounting.

»» Galvanised chassis »» Oval tank for excellent product agitation »» Large sump to allow full draining »» Platform for pumps, reels and accessories »» Forklift points with guides »» Options include boom mounting for suitable booms, foam markers, electric controls, flushing tank and remote rewind RetraSpray reels

NEW Availabe in April 2014

$ (EX. GST)

PROD. CAT.

ORDER CODE

DESCRIPTION

US1100/30

Base model 1100 litre tray-mount sprayer with galvanised chassis, pump/reel platform, AR30 motorised pump powered by GX200 Honda (manual start) – no reel, boom or accessories fitted

6,990.00

X

US1500/30

Base model 1500 litre tray-mount sprayer with galvanised chassis, pump/reel platform, AR30 motorised pump (manual start) – no reel, boom or accessories fitted

7,450.00

X

Accessories and options

30

DESCRIPTION

RSRL-100RC

Remote rewind RetraSpray reel with a 100 metre hose and Turbo 400 gun (up to two can be fitted on the platform) (each)

2,750.00

X

L-R1412

Manual hose reel, 30 metres hose, Turbo 400 gun

598.80

X

AR70-5H

AR70 motorised pump powered by GX200 Honda (manual start) in lieu of AR30 (more suited if a boom is fitted)

150.00

X

AR-ES

Electric start for GX200 Honda for AR70 or AR30 pump

742.50

X

USBOOMBRKT

Sliding boom bracket to extend over vehicle tray (slides into platform at rear)

1,020.00

X

LT-20

20 litre hand-wash tank fitted

350.00

X

MF06

6 metre rear manual folding boom

1,456.13

X

MF08

8 metre rear manual folding boom

1,795.00

X

MF10

10 metre rear manual folding boom

2,160.00

X

BT-LIGHTS

Light kit for boom

840.00

X

A5200052

Foam marker, fitted

1,495.00

X

LT-LA-IE2032W

3-section remote in-cab control system for wireless shut-off for 3 boom sections when boom is fitted (only suitable if AR70-5H is fitted)

2,495.00

X

www.croplands.com.au

$ (EX. GST)

PROD. CAT.

ORDER CODE

Photos are for illustrative purposes only. Prices and specifications are subject to change without notice. Prices effective January 2014. For indicative freight prices, see page 111.


Section 1

Retractable Reel Sprayers

Quick Guide Croplands RetraSpray 12 volt retractable reel will take all the work out of gun spraying. The time and effort saved is well worth the investment – up to 40% more productivity can be expected with the operator not having to lug a heavy hose around or to rewind over 100 kilos of hose up by hand when making a move to a new area. The Supa-slip hose on the reel will slip around rocks, tree stumps, posts and any other obstacle without snagging. Do yourself a favour and invest now.

RetraSpray Reel

12 Volt Retractable Reels »» 12 volt 1/5HP low rev motor directly coupled to the reel »» Push button hose retraction standard, remote control for rewinding is optional »» Spray Gun not included, select from gun options below or supply your own from your existing rig

B26.901.165MK2

»» Connect to 12 volt DC power source using heavy duty power cable supplied »» Remote control option includes roller guides for hose and remote wireless control for rewinding

Choose your gun and add to your order

RetraSpray 100 »» GX120 Honda motor with 3 year Honda warranty »» AR252 twin diaphragm 25 bar, 25 L/min pump

RL10

»» Pressure controller and pressure gauge »» Reel as described above RetraSpray 160 »» GX160 Honda motor with 3 year Honda warranty »» AR30 twin diaphragm 40 bar, 32 L/min pump »» Pressure controller and pressure gauge

RSRL-100RC

»» Reel as described above

RS100-300-100RC

RS160-500T100RC

US500/30/100RC

$ (EX. GST)

PROD. CAT.

ORDER CODE

DESCRIPTION

RSRL-100RC

RetraSpray single reel with 100 metre hose and remote control

B26.901.165MK2

Turbo 400 with metal grip and protected lever, 50 bar (725 psi), suits 160 model

RL10

RL10 gun with 500mm steel lance, adjustable nozzle, suits 100 model

RS100-300-100RC

300 litre tank, 25 L/min pump, Honda GX120 motor, retractable reel with 100 metre hose and remote control kit

RS100-500-100RC

500 litre tank, 25 L/min pump, Honda GX120 motor, retractable reel with 100 metre hose and remote control kit

7,600.00

F

RS160-300-100RC

300 litre tank, 35 L/min pump, Honda GX160 motor, retractable reel with 100 metre hose and remote control kit

8,775.00

F

RS160-500-100RC

500 litre tank, 35 L/min pump, Honda GX160 motor, retractable reel with 100 metre hose and remote control kit

9,495.00

F

RS160-500T100RC

500 litre tank, 35 L/min pump, Honda GX160 motor, twin retractable reels with 100 metre hose and remote control kits

US500/30/100RC

CropPak 500 litre, comes with RetraSpray RSRL-100RC reel (see above)

2,750.00

F

169.00

Z

79.63

Z

7,290.00

F

11,195.00

F

8,625.00

X

Note: Guns sold separately. See above.

Photos are for illustrative purposes only. Prices and specifications are subject to change without notice. Prices effective January 2014. For indicative freight prices, see page 111.

Optima BUYERS’ GUIDE – JANUARY 2014

31


Section 1

Chemical Handling

Chemical mixers

Quick Guide Chem-e-flush 30 litre »» Ideal for linkage and small trailed sprayers »» Fully enclosed with rinsing nozzles for flushing containers and the mixer internally Chem-e-flush 60 litre »» Used on larger linkage sprayers and trailed sprayers »» Fully enclosed with rinsing nozzles for flushing containers and the mixer internally »» Mix safely and use the spray pump to activate fast-suction venturi

A5032130

L-H9351A $ (EX. GST)

PROD. CAT.

ORDER CODE

DESCRIPTION

A5032130

30 litre Chem-e-flush. Note – plumbing will be required to make the mixer work for your sprayer

1,595.00

X

L-H9351A

60 litre Chem-e-flush. Note – plumbing will be required to make the mixer work for your sprayer

1,695.00

X

LP-137A

Fixed bracket to mount 30 litre Chem-e-flush on linkage sprayers (2 required)

60.00

X

LP-9356-KIT

Fixed bracket to mount 60 litre Chem-e-flush on linkage sprayers

275.00

X

L-H9355A

Spring loaded drop-down bracket for 60 litre Chem-e-flush. Ideal for trailed sprayers

995.00

X

Foam marker and foam concentrate

A5200052 (kit includes foam droppers)

L-M9020

ORDER CODE

DESCRIPTION

A5200052

Double-sided foam marker kit with in-cab switchbox for use on booms up to approximately 18 metres (depending on speed of travel)

$ (EX. GST) PROD. CAT.

L-M9020

High Expansion Spraymate premium foam, white, 20 litres

L-M9010

High Expansion Spraymate premium foam concentrate, white, 5 litres

1,495.00

X

189.49

X

85.65

X

Foam marker Spare Parts

32

ORDER CODE

DESCRIPTION

FM-COMP

Compressor to suit SAL901654, SAL901658 and ARAG foam marker

416.89

X

FM-COMP2

Thomas compressor to suit R-M2012 foam marker model

507.85

X

SAL901078.01

24 litre foam tank (not pictured)

183.27

Y

SAL901624-2

Cap with tube and fittings for foam marker tank

142.78

Y

A520004.260

Foam boot assembly, long

99.00

Y

A520004.261

Foam boot assembly, short

129.00

Y

RHAA120

Foam boot assembly to fit R-M2012 model

115.00

Y

www.croplands.com.au

$ (EX. GST) PROD. CAT.

FM-COMP

SAL901624-2

A520004.261

RHAA120

Photos are for illustrative purposes only. Prices and specifications are subject to change without notice. Prices effective January 2014. For indicative freight prices, see page 111.


 Section 2

Diaphragm pumps��������������� 34

Pressure Relief Valves�������� 40

Low Pressure Pumps��������������������34

Manual Control Valves/Regulators����������������������40

AR Hydraulic Drive Kits���������������35 Medium and High Pressure����������36

Centrifugal Pumps������������� 41

Pressure Relief Valves������������������40

AR Motorised Positive Displacement Pumps�������������������38

12v Pumps���������������������������� 42

Knapsack sprayers������������ 46

Flojet Pumps �����������������������������42

Industrial Range�������������������������47

Shurflo Pumps����������������������������44

Agricultural Range����������������������47

Apex 12 Volt Pumps�������������������45

Apex Sprayers���������������������������50

DIESEL ADBLUE UNITS������������� 52

Safety with Chemical Handling����������������������������� 58 Kasco Helmet/Respirator and Filters���������������������������������58 Chemical Transfer����������������������58

Spray guns, hoses and accessories������������������������� 56

Measuring Jugs��������������������������59

Hosereels����������������������������������57

Tank and Equipment Cleaner and Protectant���������������������������59

Spreaders���������������������������� 54

Pressure Gauges������������������������57

Spraysuits and Gloves����������������59

Firefighters������������������������� 60

Grain storage and hay baling applications����������� 61

Spray tanks������������������������� 62

Photos are for illustrative purposes only. Prices and specifications are subject to change without notice. Prices effective January 2014. For indicative freight prices, see page 111.

Optima BUYERS’ GUIDE – JANUARY 2014

33


Section 2

DIAPHRAGM PUMPS

Low Pressure Pumps up to 20 Bar The Annovi Reverberi (AR) range of diaphragm pups have been industry leaders for more than 60 years. Croplands have been fitting AR pumps to their entire sprayer range for 40 years, and supplying farmers and growers with these high quality pumps for the same duration. Rugged, reliable and robust, an AR pump will give years of good service if looked after and maintained. AR252

AR135 Bp

Ideal for small boom sprayers

Ideal for booms up to 18 metres

Available in

C

SP

T

CRGI

Available in

AR250 Bp

C

SP

T

CR

Ideal for booms up to 36 metres and above Available in

and EM

and EM Open flow

Open flow

25 L/min

132 L/min

Open flow

APCC CF25 CF32 254 L/min

Max pressure 25 Bar

Max pressure 20 Bar

Max pressure 20 Bar

Max RPM

650

Max RPM

550

Max RPM

550

Weight

4kg

Weight

15.5kg

Weight

38.5kg

HP required

1.45

HP required

6.8

HP required

11.4

Twin diaphragm, anodised alloy AR70 Bp Ideal for booms up to 10 metres Available in Open flow

Triple diaphragm, plastic coated heads, alloy casing

6-diaphragm, plastic coated heads, alloy casing

AR140LFP

AR280 Bp

C

SP

Ideal for booms up to 18 metres, for both liquid fertliser and general spraying

T

CR

Available in

72 L/min

Open flow

Max pressure 20 Bar

C

550

Max pressure 20 Bar

Weight

11.8kg

HP required

3.4

Max RPM

550

Weight

16kg

HP required

5.2

AR80LFP Ideal for booms up to 12 metres, for both liquid fertliser and general spraying Available in

C

Open flow

76 L/min

Max RPM

550

Weight

14kg

HP required

3.4

AR160 Bp

APCC CF25

Open flow

166 L/min

Ideal for booms up to 15 metres

Max RPM

550

Weight

38.5kg

HP required

12.9

AR330LFP* Ideal for very high applications, for both liquid fertliser and general spraying Available in

APCC CF32

550

Open flow

319 L/min

Weight

27.5kg

HP required

8.4

Max pressure 20 Bar

AR185 Bp

SP

Ideal for booms up to 36 metres

T

CR

Available in

APCC CF25

Open flow

182 L/min

Max RPM

550

Max RPM

550

Weight

27.5kg

Weight

15.5kg

HP required

9.3

HP required

5.5

4-diaphragm, plastic coated heads, alloy casing

550

Weight

60kg

HP required

17.4

AR410LFP* Ideal for very high applications, for both liquid fertliser and general spraying Available in

APCC CF32

Open flow

450 L/min

Max pressure 20 Bar

*Larger models (AR160 to AR280) have a choice of diaphragm material fitted. Pumps with a “D” in the part number are fitted with Desmopan (clear) diaphragms, those without the “D” in the part number are fitted with HPDS (high performance diaphragm material – black in colour). Desmopan diaphragms are mostly used in broadacre sprayers for boom-spraying as they have a better tolerance for modern formulations of products for that market. HPDS diaphragms are more flexible and perform better in horticultural sprayers especially with copper and sulphur-based formulations.

www.croplands.com.au

Max RPM

4-diaphragm, high pressure pump

Max pressure 20 Bar

Max pressure 20 Bar

Triple diaphragm, plastic coated heads, alloy casing

282 L/min

Max RPM

C

114 L/min

CF32

6-diaphragm, plastic coated heads, alloy casing

4-diaphragm, plastic coated heads, alloy casing

AR115 Bp

Open flow

Triple diaphragm, poly heads and manifolds

Available in

APCC CF25

Max pressure 20 Bar

Max pressure 20 Bar

Triple diaphragm, poly heads and manifolds

Available in

Open flow

Ideal for booms up to 24 metres

Max pressure 20 Bar

Ideal for booms up to 36 metres and above Available in

133 L/min

Max RPM

Twin diaphragm, plastic coated heads, alloy

34

For information on controllers to suit our pumps, refer to page 40. For common spare parts, refer to page 39.

Max RPM

550

Weight

78.5kg

HP required

22.4

4-diaphragm, poly heads and manifolds

Photos are for illustrative purposes only. Prices and specifications are subject to change without notice. Prices effective January 2014. For indicative freight prices, see page 111.


Section 2

DIAPHRAGM PUMPS

Drive options for AR PUmps C

Cardan Shaft – pump is fitted with a 1³∕8” male 6-spline shaft

APCC

Cardan Shaft – 1³∕8” 6-spline shaft both sides of pump

Csp

1³∕8” 6-spline shaft one side, bare shaft on the other

APC

CF25 CF32

Female input for direct hydraulic motor fitting. See below for hydraulic drive kits to suit pump models with CF25

T

Tractor Kit – to connect pump directly to tractor PTO shaft

SP

Bare Shaft – models to suit various kits and applications

CR

Gearbox fitted to pump but without PRV fitted

CRGI

Pricing for AR Low pressure pumps

SP

T

APCC CF25 CF32

$ (EX. GST)

$ (EX. GST)

$ (EX. GST)

$ (EX. GST)

$ (EX. GST)

705.00

1,027.00

620.00

820.00

1,095.00

1,575.00

990.00

1,190.00

1,095.00

Y

1,495.00

1,985.00

1,385.00

1,585.00

AR135

Y

1,595.00

2,265.00

1,485.00

1,805.00

AR140LFP

Y

1,795.00

AR160 and AR160D

Y

2,300.00

AR185 and AR185D

Y

2,420.00

AR250 and AR250D

Y

3,040.00

AR280 and AR280D

Y

3,325.00

AR330LFP

Y

4,850.00

AR410LFP

Y

7,225.00

Prod. Cat.

AR252

Y

AR70

Y

AR80LFP

Y

AR115

CR

For petrol and electric drive models, see following pages along with spare parts information.

CRGI

MODEL

C

Gearbox and PRV fitted to pump

$ (EX. GST)

AR Hydraulic drive kits There are two ways to fit hydraulic drive to the Annovi Reverberi (AR) pump range. The models with CF25 female drive capability can be fitted with a hydraulic motor directly bolted to the pump housing. This is the simplest setup and is available on our AR160, AR185 and AR250 Broadacre pump models.

Flange and Coupler – Kit AR1568 For the smaller range of AR pumps (up to AR135) or for converting an existing 6-spline model from PTO to hydraulic drive, the use of a flange is required

Alternatively for our smaller pumps, from AR70 to AR135, and to retrofit to any splined shaft AR pump in the larger range (AR160 to AR280) there is a flange available with a slip-fit female coupler allowing a hydraulic motor to be used. The hydraulic drive option – especially for modern tractors with good hydraulic systems and multiple remotes – is a very safe method of driving a pump negating the need for a PTO-shaft and its associated maintenance and safety concerns.

Hose Kit – BP-613DS Hose kit complete with fittings. Available in long and short drawbar versions

Hydraulic Drive – OMP80-BMPV Hydraulic motor complete with flow valve, ready to install

ORDER CODE

DESCRIPTION

AR70/115/135-KIT

Hydraulic drive kit including flange coupler to fit the 6-spline male pump shaft, hydraulic motor and hose kit. Specify if for linkage or trailed sprayer conversion

875.00

W

AR160/185-KIT

Hydraulic drive kit including flange coupler to fit the 6-spline male pump shaft, hydraulic motor and hose kit. Specify if for linkage or trailed sprayer conversion

1,675.00

W

AR250/280-KIT

Hydraulic drive kit including flange coupler to fit the 6-spline male pump shaft, hydraulic motor and hose kit. Specify if for linkage or trailed sprayer conversion

1,675.00

W

AR160/185CF-KIT

Hydraulic drive kit for female pump input on CF-type AR pump models – includes hydraulic motor and hose kit. Specify if for linkage or trailed sprayer conversion

1,675.00

W

AR250/280CF-KIT

Hydraulic drive kit for female pump input on CF-type AR pump models – includes hydraulic motor and hose kit. Specify if for linkage or trailed sprayer conversion

1,675.00

W

Photos are for illustrative purposes only. Prices and specifications are subject to change without notice. Prices effective January 2014. For indicative freight prices, see page 111.

$ (EX. GST) PROD. CAT.

Optima BUYERS’ GUIDE – JANUARY 2014

35


Section 2

DIAPHRAGM PUMPS

Medium and High pressure Diaphragm pumps For information on controllers to suit our pumps, refer to page 40. For common spare parts, refer to page 39.

AR medium pressure (40 bar) pumps are well suited to smaller hand spraying units where applications using hand guns are needed. Very robust and reliable, this range can be motor driven or by PTO. The high pressure (50 bar) range is most commonly fitted to air-blast equipment such as our Cropliner sprayer or our linkage range for horticulture. At the top end, the 170 and 200 litre brass head/manifold pumps are highly resistant to copper products in particular.

AR330 Ideal for small spot spraying units

C

Available in

CR

AR1604

Ideal for high pressure spot sprayers and small airblast units

Ideal for high pressure airblast sprayers

AR813 Available in

APCC

Open flow

35 L/min

Max pressure

40 Bar

Open flow

80 L/min

Max RPM

550

Max pressure

50 Bar

Weight

9kg

Max RPM

550

HP required

3

Weight

20.5kg

HP required

8.8

Triple diaphragm, medium pressure pump, anodised alloy

Ideal for medium spot spraying units Available in

C

SP

T

CRGI

CR

APC

Csp

APCC

Open flow

153 L/min

Max pressure

50 Bar

Max RPM

550

Weight

40kg

HP required

18

ARBHS170 Ideal for high pressure airblast sprayers

AR1064 Ideal for high pressure spot sprayers and small airblast units AR1064 Available in

Available in

4 diaphragm, high pressure, anodised alloy

Triple diaphragm, high pressure pump, anodised alloy

AR503

APCC

Available in

APCC CF25

Open flow

163 L/min

Max pressure

50 Bar

Max RPM

550

Open flow

54 L/min

Max pressure

40 Bar

Open flow

105 L/min

Max RPM

550

Max pressure

50 Bar

Weight

65kg

Weight

11.5kg

Max RPM

550

HP required

19.3

HP required

5.6

Weight

23.5kg

HP required

13.1

4-diaphragm high pressure pump with brass heads and manifolds

Triple diaphragm, medium pressure pump, anodised alloy AR30 Ideal for small spot spraying units Available in

C

SP

T

CRGI

EM and ET Open flow

36 L/min

Max pressure

40 Bar

Max RPM

550

Weight

9.3kg

HP required

2.9

Twin diaphragm, medium pressure pump, plastic coated heads, alloy casing

36

AR813

4-diaphragm, high pressure pump, anodised alloy AR1203

ARBHS200 Idea for high pressure airblast sprayers

Ideal for high pressure airblast sprayers

Available in

APCC

Open flow

194 L/min

Max pressure

50 Bar

50 Bar

Max RPM

550

Max RPM

550

Weight

65kg

Weight

31.2kg

HP required

22.1

HP required

13.6

4-diaphragm high pressure pump with brass heads and manifolds

Available in

APCC

Open flow

116 L/min

Max pressure

Triple diaphragm, high pressure pump, anodised alloy

www.croplands.com.au

Photos are for illustrative purposes only. Prices and specifications are subject to change without notice. Prices effective January 2014. For indicative freight prices, see page 111.


Section 2

DIAPHRAGM PUMPS

C

Cardan Shaft – pump is fitted with a 1³∕8” male 6-spline shaft

APCC

Cardan Shaft – 1³∕8” 6-spline shaft both sides of pump

Csp

1³∕8” 6-spline shaft one side, bare shaft on the other

APC

CF25 CF32

Female input for direct hydraulic motor fitting. See page 35 for hydraulic drive kits to suit pump models with CF25

T

Tractor Kit – to connect pump directly to tractor PTO shaft

SP

Bare Shaft – models to suit various kits and applications

CR

Gearbox fitted to pump but without PRV fitted

CRGI

Gearbox and PRV fitted to pump

For petrol and electric drive models, see following pages along with spare parts information.

Pricing for AR Medium and high pressure pumps C

CRGI

SP

T

APCC CF25 CF32

$ (EX. GST)

CR $ (EX. GST)

$ (EX. GST)

$ (EX. GST)

$ (EX. GST)

$ (EX. GST)

MODEL

PROD. CAT.

AR30

Y

925.00

1,690.00

905.00

1,130.00

AR303

Y

895.00

AR503

Y

1,845.00

2,135.00

1,130.00

1,390.00

AR813

Y

1,575.00

1,475.00

AR1064

Y

1,935.00

AR1203

Y

2,340.00

ARB1604

Y

2,590.00

ARBHS170

Y

3,750.00

ARBHS200

Y

3,950.00

AR pumps, fitted to croplands sprayers for 40 years

The AR30 pump (pictured above) is one of the hardest working little pumps on the market. Coupled to the ever-reliable Honda GX200 engine, this unit will give years of use. Croplands have thousands of these in operation throughout Australasia working in greenhouses, vegetable farms, on pest control trucks, spraying gorse and working on boring machines – they will go till they drop. For more information on this model, turn the page.

Croplands have been making the Cropliner orchard sprayer (pictured above) since 1972. Annovi Reverberi (AR) pumps have been fitted to the Cropliner right from the beginning – for more than 40 years, and for a very good reason. Rugged, robust, reliable – some of the sprayers built in the 70s are still out spraying, and in no small part to the reliability of the AR pumps. Nowadays we fit the brass AR170BHS model as standard equipment as many of our sprayers end up in hard going – spraying copper compounds which the brass pump can withstand. We also sell a range of less expensive anodised alloy pumps for replacements – the AR1203 and AR1604 are two new models being introduced in 2014 for replacements on older sprayers where a brass pump is not economical to fit. One thing is for sure – buy an AR pump and you will have years of use out of it.

Photos are for illustrative purposes only. Prices and specifications are subject to change without notice. Prices effective January 2014. For indicative freight prices, see page 111.

Optima BUYERS’ GUIDE – JANUARY 2014

37


Section 2

Diaphragm pumps

AR motorised positive displacement pumps

AR30-5H

The range of petrol driven, electric and hydraulic drive AR pumps are featured on these pages, along with information on kits for hydraulic operation or converting existing pumps from PTO to Hydraulic drive.

AR30 pump fitted with gearbox with a Honda GX200QX motor and ARGI40 pressure regulator – all set to go. This is our number one seller for positive displacement spraying. Ideal for gun spraying in glasshouses and nurseries, or on utility-mounted sprayers such as our US200/400 and 500 units. A very reliable combination for higher pressure applications where hand-guns are used. Maximum pressure 40 bar, open flow 32 L/min.

For the petrol driven AR pump range, we use only the ever-reliable Honda motors to ensure our customers can access Honda’s extensive service network throughout New Zealand and Australia for after-market support. The electric drive AR range comes with factoryfitted electric motors and are ideal for commercial applications where positive-displacement pumps are needed.

AR70-5H The AR70 motorised pump also comes with a Honda GX200QX motor, gearbox and ARECM-2 pressure regulator fitted. This unit is more suited to boomspraying applications where spraying pressure required is under 10 bar. Maximum pressure 20 bar, open flow 72 L/min.

AR252-4H AR252 pump fitted with gearbox with a Honda GX200QX motor and ARGR30 pressure regulator. This unit is ideal for smaller hand-gun or boomspraying applications where price is a factor.

AR115-5H The AR115 motorised pump comes with a Honda GX200QX motor, gearbox and ARECM-2 pressure regulator fitted. This unit is suited to boomspraying applications where spraying pressure required is under 10 bar and for booms up to around 15 metres in width. An ideal unit for boom sprayers mounted on utes or other vehicles. Maximum pressure 20 bar, open flow 114 L/min.

AR135-6H The AR135 motorised pump comes with a Honda GX200QX motor, gearbox and ARECM-2 pressure regulator fitted. This unit is suited to boomspraying applications where spraying pressure required is under 10 bar and for booms up to around 18 metres in width. An ideal unit for boom sprayers mounted on utes or other vehicles. Maximum pressure 20 bar, open flow 132 L/min. AR30-5H

AR252-EM The AR252 with single-phase electric motor fitted is a very popular positive displacement pump commonly used for such agricultural uses as fertiliser injection where positive pressure is required. Also suited to some smaller commercial installations. Maximum pressure 25 bar, open flow 25 L/min.

AR30-EM The AR30 with single-phase electric motor fitted is the larger option for a positive displacement pump and can also be used for fertiliser or chemical injection where positive pressure is required. Maximum pressure 40 bar, open flow 32 L/min.

AR30-ET The ET version of the AR30 with 3-phase motor fitted has the same specifications as the EM. The pump is also ideally suited to commercial applications where positive displacement for chemical transfer or injection is required. Maximum pressure 40 bar, open flow 32 L/min.

AR30-EM

To petrol drive larger AR pumps, please contact Croplands for options and pricing. Note, to fit electric start on some of the AR petrol-driven motorised pumps on this page, please add the following code and price to your order.

AR252-EM

Petrol and Electric Drive model

38

ORDER CODE

DESCRIPTION

AR-ES

Electric start kit for Honda

$ (EX. GST) PROD. CAT. 875.00

X

MODEL

EM $ (EX. GST)

ET $ (EX. GST)

4HP $ (EX. GST)

5HP $ (EX. GST)

6.5HP $ (EX. GST)

AR252

1,325.00

2,350.00

Y

AR30

2,595.00

2,660.00

2,795.00

Y

AR70

2,995.00

Y

AR115

3,450.00

Y

AR135

3,705.00

Y

www.croplands.com.au

Prod Cat

Photos are for illustrative purposes only. Prices and specifications are subject to change without notice. Prices effective January 2014. For indicative freight prices, see page 111.


Section 2

DIAPHRAGM PUMPS

Parts and accessories Diaphragms Order CODE

Diaphragms For Pump MODELS

MATERIAL

AR550085

AR70, 115, 125, 135, 145, 160, 185, 250, 280, 370, 500

DESMOPAN

$ (EX. GST) PROD. CAT. 46.63

Y

AR550086

AR70, 115, 125, 135, 145, 160, 185, 250, 280, 370, 500 (20 bar max)

HPDS

47.21

Y

AR620080

AR30 (40 bar max), AR503 (50 bar max)

GOMMA

31.18

Y

AR620085

AR30 (40 bar max)

DESMOPAN

37.42

Y

AR800086

AR19 and 252 (20 bar max)

HPDS

23.83

Y

AR1040081

AR813, 1064 (50 bar max)

GOMMA

39.19

Y

AR2240080

ARBHA140, BHS140, BHS160/170, BHS200 (50 bar max)

GOMMA

51.08

Y

Desmopan diaphragms – AR550085

HPDS diaphragms – AR550086

Valves CODE

Valves For Pump MODELS

AR759051

AR70, 115, 125, 135, 145, 160, 185, 250, 280, 370, 500 (20 bar max). ARBHA140, BHS140, BHS160/170, AR2HS200 (50 bar max)

$ (EX. GST) PROD. CAT. 53.80

Y

AR1409050

AR30 (40 bar max). AR503, 813, 1064 (50 bar max)

41.60

Y

AR809060

AR19 and 252 (20 bar max)

44.71

Y

Valve “O” Rings

Valves – AR759051

CODE

VALVE O-RINGS FOR PUMP MODELS

$ (EX. GST) PROD. CAT.

AR680070

AR125, 145, 160, 185, 250, 280, 370, 500 (20 bar max). ARBHA140, BHS140, BHS160/170, BHS200 (50 bar max)

3.52

Y

AR320030

AR70, 115, 135 (20 bar max)

3.14

Y

AR620030

AR30 (40 bar max). AR503, 813, 1064 (50 bar max)

1.66

Y

AR880830

AR19 and 252 (20 bar max)

0.60

Y

Discs CODE

DISC FOR ARGI40 REGULATOR

AR110121

Vulkulan disc

$ (EX. GST) 8.27

PROD CAT Y

Repair Kits Code

COMMON REPAIR KITS

PR66

2 X AR550086 for AR70 pump

$ (EX. GST) 97.67

PROD CAT Y

PR67

4 valves and O-rings for AR70

208.51

Y

AR2374

Kit (8 x 680070 and 8 x 759051) for 4-diaphragm pumps

397.47

Y

AR1917

Valve and O-rings kit FOR AR30

206.79

Y

AR1925

Kit reg overhaul (GI40) – for ARGI40 regulator

60.39

Y

AR110121

Safety Relief Valves code

SAFETY RELIEF VALVES

AR1432

Valve safety (20 bar) – safety relief valve with reset

$ (EX. GST) 58.99

PROD CAT Y

AR1433

Valve safety (40 bar) – safety relief valve with reset

58.99

Y

AR1434

Valve safety (50 bar) – safety relief valve with reset

58.99

Y

code

COMMONLY USED GEARBOXES FOR AR PUMPS

$ (EX. GST)

AR1613

Gearbox (AR19/202/252 1:4.3)

372.58

Y

AR1636

Gearbox (AR30 1:5.9)

602.77

Y

AR1639

Gearbox (AR50;503;703 and 904 1:5.9)

664.16

Y

AR1671

Gearbox (AR70/115/120 1:5.9)

601.91

Y

Gear Boxes PROD CAT

AR1434

AR pump with gearbox fitted

Photos are for illustrative purposes only. Prices and specifications are subject to change without notice. Prices effective January 2014. For indicative freight prices, see page 111.

Optima BUYERS’ GUIDE – JANUARY 2014

39


Section 2

Pressure relief valves

Manual Control Valves/Regulators ORDER CODE

DESCRIPTION

$ (EX. GST) PROD. CAT.

ARGR30

Controller for AR252 pump, max flow 40 L/min, maximum operating pressure 25 bar (360 psi). Mounting kit not included. (*See AR892 for remote mount kit.)

225.74

Y

AR892

Remote mount kit for ARGR30, includes mount plate and bolts, extra tap, hosetails and inlet/outlet fitting

104.35

Y

ARGI40

3-outlet (2-taps supplied) manual controller suited to the AR30 pump. Can be pump mounted or remote mounted*. (*See AR980 for remote mount kit). Max flow 80 L/min, maximum pressure 40 bar (580 psi)

182.47

Y

AR980

Remote mount kit for ARGI40, includes mount plate and bolts, extra tap, hosetail and inlet/outlet fitting.

100.66

Y

ARRM40I

Two-way controller to suit AR503 pump. Can be pump mounted or remote mounted*. (*See AR985 for remote mount kit.) Max flow 90 L/min, maximum pressure 40 bar (580 psi)

238.12

Y

AR985

Remote mount kit for ARRM40I, includes mount plate and bolts, extra tap, hosetails and inlet/outlet fitting.

75.26

Y

ARVDR50

Two-way controller to suit AR813 or AR1064 pump. Can be pump mounted or remote mounted*. (*See AR998 for remote mount kit.) Max flow 130 L/min, maximum pressure 50 bar (725 psi)

428.31

Y

AR998

Remote mount kit for ARVDR50, includes mount plate and bolts, extra tap, hosetails and inlet/outlet fitting

103.97

Y

ARECM-4

Remote mount 4-way controller suitable for most 20 bar rated diaphragm pumps. 4 individual shut-off taps and gauge fitted. Comes with remote mount plate fitted. Max flow 150 L/min, maximum pressure 20 bar (290 psi). 2-tap version also available

364.91

Y

ARUCM-4

Remote mount 4-way controller suitable for most 20 bar rated diaphragm pumps. 4 individual shut-off taps, master shut-off lever and gauge fitted. Comes with remote mount plate fitted. Max flow 150 L/min, maximum pressure 20 bar (290 psi). 2-tap and 6-tap version also available.

561.30

Y

ARIDROM-4

Remote mount pressure compensating 4-way controller suitable for most 20 bar rated diaphragm pumps. Bypass taps on each section can be adjusted for pressure compensation of +/– 15%. 4 individual shut-off taps, master shut-off lever and gauge fitted. Comes with remote mount plate fitted. Max flow 150 L/min, maximum pressure 20 bar (290 psi). 2-tap and 6-tap version also available

865.91

Y

ARBMH50

Two-outlet manual controller suited to high pressure 50 bar rated diaphragm pumps. Rotary selector lever controls individual left and right shut-off or master shut-off with either pressure bypass or non-pressure bypass. Can be pump mounted or remote mounted*. (*See AR996 for remote mount kit.) Max flow 200 L/min, maximum pressure 50 bar (725 psi)

522.63

Y

AR996

Remote mounting kit for ARBMH50 controller includes mount plate and bolts, hosetails and inlet/outlet fitting

43,68

Y

Pressure Relief Valves Pressure relief valves (PRV) for excess liquid bypass, chemical resistant.

40

ORDER CODE

DESCRIPTION

23120-½-60-PP 23120-½-PP 23120-¾-PP 23120A-½-PP 23120A-¾-PP 8460-½-300 8460-¾-50 8460-¾-300 8460-¾-VI

PRV poly 400 kPa 60 psi ½” PRV poly 1000 kPa 150 psi ½” PRV poly 1000 kPa 150 psi ¾” PRV poly/VI/SS spring 1000 kPa 150 psi ½” PRV poly/VI/SS spring 1000 kPa 150 psi ¾” PRV nylon diaphragm 2000 kPa 300 psi ½” RV nylon diaphragm 350 kPa 50 psi ¾” PRV nylon 2000 kPa 300 psi ¾” PRV 2000 kPa 300 psi VITON ¾”

59.88 68.21 68.21 120.52 120.52 127.34 127.34 127.34 159.75

Z Z Z Z Z Z Z Z Z

B410.1510.2

PRV 60 bar female outlet ¾”

281.96

Z

www.croplands.com.au

$ (EX. GST) PROD. CAT.

Photos are for illustrative purposes only. Prices and specifications are subject to change without notice. Prices effective January 2014. For indicative freight prices, see page 111.


Section 2

Centrifugal pumps

Centrifugal Pumps

Quick Guide Croplands stock a range of hydraulic drive centrifugal pumps specifically for the spraying and liquid fertiliser. Models include:

NEW

»» E-coated 650 series cast iron, high pressure and flow for spraying »» Poly pump 75 series model, well priced, lower flow but ideal for liquid fertiliser applications »» Cast iron 150 series 300–450 L/min output at 3-6 bar range – a proven performer »» 316 stainless 150 series flanged model for aggressive fertiliser applications – high flow and pressure capability

FMC-75-HYD-206

FMC-150FS-HYD-206

NEW

For water transfer, filling and firefighting, models we carry as follows: »» Banjo hydraulic drive 2” poly pump, up to 580 L/min flow – ideal to fit to trailing sprayers for filling from an external water source »» Honda-powered Onga firefighter pump to fit as a replacement to older fire fighting units or to set up your own system using a tank at the farm

FMC-150-HYD-206

FMC-650F-HYD

Banjo 200PHY

SHUB55H

ORDER CODE

DESCRIPTION

FMC-150-HYD-206

Suction 1½” discharge 1¼”. For use on pressure compensating closed centre and load sensing or pressure flow compensating closed centre systems, open-centre systems from 26 to 60 L/min. Integral needle valve bypasses up to 34 L/min on open-centre systems. Standard Viton® Carbon/Ceramic seal. Chemical Resistant Valox® Impeller. Stainless steel shaft and wear ring. Hypro equivalent = 9303-HM2C and HM4C

2,069.00

X

FMC-75-HYD-206

The ideal pump for the economical set-up of liquid fertiliser units. 1” suction, ¾ discharge. Maximum flow of 86 L/min, maximum pressure of 100 psi. Stainless steel internal hardware. Standard Viton/carbon/ceramic seal. All poly construction on liquid side

1,255.00

X

FMC-650F-HYD

E-coated cast iron centrifugal pump for high flow and pressure. Hydraulic drive (55 L/min) motor. Inlet is 220 full port flange (1½”) with 1¼” flanged outlet (200 standard) port. Max flow 650 L/min, max pressure 120 psi (11 bar)

2,050.00

X

FMC-150FSHYD-206

316 stainless steel centrifugal pump ideal for use with liquid fertilisers. Hydraulic drive (27 L/min) motor with integrated needle valve. Inlet is 220 full port flange (1½”) with 1¼” flanged outlet (200 standard) port. Max flow 550 L/min, max pressure 160 psi (8 bar)

2,390.00

X

200PHY

Banjo 2” polypropylene hydraulic-drive centrifugal pump. Minimum hydraulic flow required = 23 L/min (maximum 38 L/min) suits open or closed systems. 580 L/min liquid flow at 3450rpm at 1 bar pressure

2,225.00

X

SHUB55H

Honda GX160 powered Onga firefighter pump. Also suitable for tank filling, water transfer and some irrigation situations. Industrial grade nylon impeller, powder-coated high-grade alloy pump casing, 3-way discharge outlets, close coupled direct engine drive, large carry handle and light weight. Large 1½” priming port for quick prime and flow rate from 100 to 500 L/min depending on required pressure (in the 2–5 bar range). Note – price for pump unit only

1,560.00

X

Photos are for illustrative purposes only. Prices and specifications are subject to change without notice. Prices effective January 2014. For indicative freight prices, see page 111.

$ (EX. GST) PROD. CAT.

Optima BUYERS’ GUIDE – JANUARY 2014

41


Section 2

Flojet pumps

Flojet pumps

The Flojet range of 12 and 240 volt pumps is designed for small spot spraying and boom spraying operations. Fitted on most of Croplands’ range of 12 volt sprayers, Flojet pumps perform well if used correctly and flushed out after use. Note that Flojet pumps are rated for intermittent use – so if you are considering a heavier duty application, consider the fin-cooled Shurflo option on page 44. Also, all flow ratings in the information below are described as open-flow at zero pressure. The graph at right – for the FL3501-506 model – shows that when pressure is demanded from a Flojet pump, flow decreases. This should be taken into account when planning which pump is suitable for your application.

Triplex and Pentaflex models

6

Pressure (bar)

4

Flow (l/min)

2 0

1

2

3

Duplex and Quad Models

3501 Triplex Pump (12 Volt)

FL112421F Series (12 Volt)

FL3501-506 • Fully sealed motor for corrosion resistance • Pressure switch for spot spraying and an internal bypass to ensure pump does not pulsate with small nozzle sizes • Low pulsation and noise • Superior pump head sealing • Excellent priming • Compact size • ³∕8” threaded ports for use with hosetails or threaded nipples Ideal for small boom or spot spraying and some other agricultural uses

TOP SELLER

FL112421F • Suited to small, portable spot sprayers • 2.4 bar (35 psi) pressure • 3.8 L/min open-flow • ³∕8” hosebarb connections Low-cost spot spray pump to replace existing pumps on smaller spot sprayers, or to make up a simple spot-spray kit 2100 and 2130 Series (12 Volt) FL2100-132 • Duplex (2) diaphragm pumps with 8 L/min (open-flow) • Pressures up to 6 bar (90 psi) on 2130 model • ³∕8” connections (¼” on 2130 model). Used for small booms, spot spraying, dairy teat-spray units, foam markers, grain and hay applicators and other agricultural uses

3521 Triplex Pump FL3521-139 • Maximum flow of 15.1 L/min (open flow) • Internal bypass gives this model superior, smooth liquid delivery for multiple nozzles • Plug-in bayonet connections (½”) with quick release clips Suited for small booms and high volume spot spraying. Triplex design makes it an excellent priming option

240 Volt Pump FL3732-501 • Maximum flow of 6 L/min (open flow) • Maximum pressure of 4 bar (60 psi) with pressure switch fitted • ³∕8” hosebarb connections • Will require wiring by a registered electrician

3811 High Pressure Triplex Pump FL3811-133 • 10.5 bar (150 psi) through the reliable triplex pump head • Priming height of up to 2.4 metres and the ability to run dry for extended periods • Pressures up to 10 bar (150 psi) • Max open flow 5.5 L/min • ³∕8” threaded ports for use with hosetails or threaded nipples Ideal for spray applications requiring higher pressures

4300 Quad Pump FL4300-143 • New heavy-duty motor • Quad-diaphragms (4) for • 17.5 L/min (open flow) • Pressure up to 3 bar (45 psi) • ¾” plug-in barb outlet • Pressure switch fitted. Regulator recommended if using a boom Ideal for boom use for lower pressures where higher flow may be required

7300 Pentflex Series FL7300-142A • Maximum flow of 26.5 L/min (open flow) • Maximum pressure of 5.5 bar (80 psi) • ¾” plug-in bayonet connectors with quick release clips • Requires heavy-duty cable (not supplied) to cope with high amperage draw Breakthrough performance for high flow and high pressure applications. Is well suited to liquid transfer, spraying and dispensing

Note: All Flojet diaphragm pumps are rated for intermittent use. PUMP MODEL

42

WITH PRESS. SWITCH

Max L/min (open flow)

VOLTS

MAX PRESS. INLET and OUTLET (BAR)

INTERNAL BYPASS

DIAPHRAGM MATERIAL

VALVE MATERIAL

AMPS

PUMP $ (EX. GST)

PROD. CAT.

FL2100-132

Yes

8.0

12V DC

4

³∕8” female

No

S

S

8

250.00

FL3732-501

Yes

6.1

240V AC

4

³∕8” female

Yes

S

E

8

395.00

Y

FL2130-132

Yes

8.0

12V DC

6

³∕8” female

No

E

E

7

338.00

Y

Y

FL3811-133

Yes

5.5

12V DC

10.5

³∕8” female

No

S

V

9

377.00

Y

FL3501-506

Yes

7.8

12V DC

3.4

³∕8” hosebarb

Yes

S

S

8

195.00

Y

FL3521-139

Yes

15.1

12V DC

4

Plug-in bayonet and ½” hosebarb

Yes

S

V

9

299.00

Y

FL4300-143

Yes

17.5

12V DC

3

¾” hosebarb

No

S

E

14

325.00

Y

Yes

S

E

28

795.00

Y

Yes

S

V

2.5

176.00

Y

FL7300-142A

Yes

26.5

12V DC

5.5

Plug-in bayonet and ¾” hosebarb

FL112421F

Yes

3.8

12V DC

2.4

³∕8” hosebarb

www.croplands.com.au

Photos are for illustrative purposes only. Prices and specifications are subject to change without notice. Prices effective January 2014. For indicative freight prices, see page 111.


Section 2

Flojet pumps

Flojet Pump accessories and parts Flojet Pump Regulator Kits

FL4300-143 pump

A309B53

A908006 gauge

A9620050 regulator

UP-119B-KIT

A309953

A309B53 A typical Flojet pump fitted with A309B53 filter and A9620050/A908006 PRV+ gauge

ORDER CODE

DESCRIPTION

A9620050

Regulator with bayonet fitting for direct coupling to the outlet of 43 series Flojet pumps to regulate pressure and flow. Regulator has a bypass to tank or suction line. ½” male threaded outlet. Order gauge separately

$ (EX. GST) PROD. CAT. 33.67

Y

A9620090

Regulator with threaded female ½” flynut connector. Some Flojet pumps have a female ³∕8” outlet, so a ³∕8” to ½” reducing nipple (A2402021) is required to fit this regulator. Regulator has a bypass to tank or suction line. ½” male threaded outlet. Order gauge separately

33.67

Y

A908006

0–6 bar glycerine filled pressure gauge to suit regulators above

33.67

Y

A309953

Suction filter, with threaded female ½” flynut connector. Some Flojet pumps have a female ³∕8” inlet, so a ³∕8” to ½” reducing nipple (A2402021) is required to fit this filter. Outlet tail from filter is 13mm

22.23

U

A2402021

³∕8” to ½” reducing nipple

4.24

Y

A309B53

Suction filter, with bayonet coupling to connect to 43 series Flojet pumps. Outlet tail from filter is 13mm

22.23

U

UP-119B-KIT

Handy on/off switch and loom kit for Flojet pumps (or similar models)

54.68

Y

Diaphragms PUMP MODEL

PART NO.

FL2100-232

FL21010-004

57.95

Y

FL2130-132

FL21010-004

57.95

Y

FL3811-133

$ (EX. GST)

Pump head only available

PROD CAT

Y

FL3501-506

FL20419-012

73.20

Y

FL4300-143

FL20403-040

54.00

y

FL3521-139

FL20419-015

133.82

Y

FL7300-142A

FL20407-720

114.00

Y

$ (EX. GST)

PROD CAT

Diaphragm

Pressure Switches PUMP MODEL

PART NO.

FL2100-232

FL2095-100

94.75

Y

FL2130-132

FL21010-004

96.05

Y

FL3811-133

fl02091-150

99.00

Y

FL3501-506

FL02091-060

53.50

Y

FL4300-143

FL02095-103

53.50

y

FL3521-139

FL02091-060

102.00

Y

FL7300-142A

FL20407-780

91.65

Y

Pressure switch

Valves PUMP MODEL

PART NO.

FL2100-232

FL20914-003

42.75

Y

FL2130-132

FL20028-053

41.25

Y

FL3811-133

fl20407-022

33.00

Y

FL3501-506

FL20407-033

33.24

Y

FL4300-143

fl20407-020

33.00

y

FL3521-139

FL20407-021

33.00

Y

FL7300-142A

fl20407-720

114.00

Y

Photos are for illustrative purposes only. Prices and specifications are subject to change without notice. Prices effective January 2014. For indicative freight prices, see page 111.

$ (EX. GST)

PROD CAT

Valve

Optima BUYERS’ GUIDE – JANUARY 2014

43


Section 2

Shurflo pumps

The Croplands range of 12 volt pumps includes popular models and introduces new models from SHURflo – the leading supplier of diaphragm pumps for Agriculture and turf applications. These 12volt models are commonly used on spot sprayers and small multi-tip boom sprayers. For 2014 we have included two heavier duty pumps to accommodate the needs of customers using their pumps in more demanding conditions. The higher flow 5059 series is a brand new model, allowing continuous spraying for small booms up to approximately 6 metres – ideal for use in RTV and ATV vehicles, the back of utility vehicles, and small trailed sprayers. This pump model will perform very well in these situations and would be an ideal replacement if you have had failures with your existing set-up in the past. Also new to Croplands range for 2014 is the fin-cooled high flow SHU2088-313145 pump. It can handle tough going and is already proving very popular in the hot climates of Northern Australia on planters and in small boom situations. For really tough conditions, consider this model.

SHUSLV10AA40

12 volt Shurflo pump, 3.8 L/min (open flow), 40 psi pressure switch. Ideal for use on small spot sprayers as a replacement pump. Has integrated ³∕8” (10mm) inlet and outlet ports.

SHU8000-547-189

SHU5059-1311-D012 12 volt Shurflo pump, 60 psi pressure switch, 6.8 L/min (open flow), with internal bypass. Note – although pictured with female ports, this model is supplied with ½” male threaded ports. Choose from the fittings below if hosetails are required. Ideal for spot sprayers where additional flow is required.

12 volt Shurflo continuous duty pump, 20.1 L/min open-flow (14 L/min at 2.75 bar), self-priming up to 2.4 metres, Santoprene diaphragms and Viton valves for maximum chemical resistance, 60 psi pressure switch, rated at 45 psi for continuous spraying. An ideal pump for use with small booms up to 6 metres (depending on output required and speed of travel)

NEW SHU2088-343-135

SHU2088-313-145

NEW

12 volt Shurflo 3-diaphragm fin-cooled pump. This model is designed for use in more heavy-demand environments such as the hotter climate in Northern Australia for use with small booms or planters. 13.6 L/min open-flow (8 L/min at 2.75 bar), self-priming up to 2.4 metres, Santoprene diaphragms and Viton valves for maximum chemical resistance, 50 psi pressure switch, rated at 40 psi for continuous spraying.

12 volt Shurflo 3-diaphragm pump, 45 psi pressure switch, 11 L/min (open flow). ½” male threaded ports. Choose from the fittings below if hose-tails are required. Ideal for small booms.

Typical set up of SHURflo pump

WITH PRESS. SWITCH

Max L/min (open flow)

VOLTS

MAX PRESS. (BAR)

INLET and OUTLET

INTERNAL BYPASS

DIAPHRAGM MATERIAL

VALVE MATERIAL

AMPS

SHUSLV10AA40

Yes

3.8

12

30

³∕8” male barbed port

No

S

V

2.5

165.00

Y

SHU8000-547-189

Yes

6.8

12

60

½” male thread

Yes

S

V

7.3

235.00

Y

SHU2088-343-135

Yes

11

12

40

½” male thread

No

S

V

7.7

299.00

Y

SHU5059-1311-D012

Yes

20.1

12

60

½” male thread

No

S

V

13

430.00

Y

SHU2088-313-145

Yes

11

12

40

½” male thread

No

S

V

10.1

499.00

Y

PUMP MODEL

44

www.croplands.com.au

PUMP $ (EX. GST)

PROD. CAT.

Photos are for illustrative purposes only. Prices and specifications are subject to change without notice. Prices effective January 2014. For indicative freight prices, see page 111.


Section 2

Shurflo pumps

Shurflo Pump accessories and parts ORDER CODE

DESCRIPTION

SHU234-2926

½” NPT – 14 female x 12mm (½”) straight swivel barb (polypropylene)

$ (EX. GST) 4.60

PROD. CAT. Y

SHU234-2916

½” NPT – 14 female x 10mm (³∕8”) straight swivel barb (polypropylene)

4.60

Y

SHU244-5286

½” NPT – 14 male x ³∕8” coupling/adaptor (polypropylene)

7.50

Y

SHU234-3926

½” NPT – 14 female x 12mm (½”) elbow swivel barb (polypropylene)

4.60

Y

SHU234-3916

½” NPT – 14 female x 10mm (³∕8”) elbow swivel barb (polypropylene)

4.60

Y

SHU234-KIT

2 of each part numbers SHU234-2926, SHU234-2916, SHU244-5286, SHU234-3926, SHU234-3916

52.00

Y

Diaphragm/Drive Assembly Kit Pump Model

Part order code

SHU8000-547-189

SHU94-385-32

$ (EX. GST) 163.00

PROD. CAT.

SHU2088-343-135

SHU94-238-03

87.25

Y

SHU5059-1311-D012

SHU94-910-04

147.25

Y

SHU2088-313-145

SHU94-238-03

81.80

Y

Y

Pressure Switch Kit Pump Model

Part order code

SHU8000-547-189

SHU94-229-08

$ (EX. GST) 53.50

PROD. CAT. Y

SHU2088-343-135

SHU94-230-36

81.80

Y

SHU5059-1311-D012

SHU94-910-02

40.37

Y

SHU2088-313-145

SHU94-230-55

120.00

Y

Valve Assembly Kit Pump Model

Part order code

SHU8000-547-189

SHU94-391-46

$ (EX. GST) 50.20

PROD. CAT. Y

SHU2088-343-135

SHU94-232-05

120.00

Y

SHU5059-1311-D012

SHU94-910-05

93.80

Y

SHU2088-313-145

SHU94-232-05

120.00

Y

CHECK Valve Kit Pump Model

Part order code

SHU8000-547-189

SHU94-374-08

$ (EX. GST) 20.75

PROD. CAT. Y

SHU2088-343-135

SHU94-237-05

60.00

Y

SHU5059-1311-D012

SHU94-910-03

27.30

Y

SHU2088-313-145

SHU94-237-05

60.00

Y

Apex 12 volt pumps (For replacement on Apex sprayers only)

AS-52210100700

AS-52210100200

AS-52210100600

ORDER CODE

DESCRIPTION

AS-52210100600

Replacement pump for Apex ASATV-10 CropPak 40 litre sprayer

132.00

Y

AS-52210100200

Replacement pump for Apex sprayers ASBBS-16 knapsack sprayer and ASAT-30M3 trolley sprayer

65.00

Y

AS-52210100700

Replacement pump for ASBBS-10 knapsack sprayer

58.00

Y

Photos are for illustrative purposes only. Prices and specifications are subject to change without notice. Prices effective January 2014. For indicative freight prices, see page 111.

$ (EX. GST) PROD. CAT.

Optima BUYERS’ GUIDE – JANUARY 2014

45


Section 2

Knapsack sprayers

Knapsack sprayers SW503 Lance clips into the lid for easy storage and carrying

TOP SELLER

Convenient sprayer carry handle

Comfortable handgrip with lever lock

Long lance

Adjustable nozzle Safer, wide 5½” diameter port with filling strainer In-built pressure filter Sturdy one-piece handle folds for easy storage

Large 15 litre tank

Wide, non-absorbent polyester straps with heavy-duty padding for strength, comfort and safety

Strong, easy to clean polyethylene tank with UV inhibitors for long life OU

In-built agitator

O TA RT

L QUALITY C OM

CROPLA

MI

TM

EN

T

Non-leak, high quality dual piston/ diaphragm pump (up to 6 bar) with Viton seals and a safety diaphragm – for wear resistance and reliability

NDS

2 YEAR bj

EC

T

TO

TO

L TA

QUA

LITY COMMITM

EN

NDS

O

CROPLA

s

jE

CT

TO

Spray

CROp

M LANds TER

TI

O

Rugged brass lance with angled nozzle holder for perfect spray distribution at the correct height

New ergonomic tank design with ribbed side panels for easier carrying and lifting

Wide filling port with filling strainer inside

IO

IT

Ub

dI

Nd

AN 0 WARoR n SW54 er

ds TERMs ANd

TY

N CO

NEW

Ns

2 YEAR TY

LAN

Carrying handle integrated into the lid design Lance clips into the lid for easy storage and carrying

T

on SW50 knapsac 3 k

Op

Adjustable brass conejet nozzle to make spray pattern adjustments fast and easy

SW540 ArRiving April 2014 UR

CR

Ns

sU

WARRA N

sA

Nd

CO

UV stabilised tank for long life

Pressure gauge mounted on the spray trigger for accurate application

Longer pumping lever to make it easier to operate the sprayer and less effort to maintain spraying pressure

Lock-on spray function on the spray gun with in-built pressure filter to avoid nozzle blockages

Pump lever can be changed from one side to the other and folds away neatly for storage

New, secure clips at the base of the straps so they won’t come off the bottom frame

Centrally mounted padded straps for comfort and quick mounting when full New low friction piston pump design with no leak system for safety – ensures more effortless and safe spraying every time

46

www.croplands.com.au

Tank to base support for added strength

Photos are for illustrative purposes only. Prices and specifications are subject to change without notice. Prices effective January 2014. For indicative freight prices, see page 111.


Section 2

Knapsack and compression sprayers

INDUSTRIAL RANGE

AGRICULTURAL RANGE

SW189C

SW319

Heavy duty 15 litre knapsack designed for industrial use (diesel compatible); wide filling neck, rugged shut-off gun, adjustable nozzle, inbuilt pressure filter, brass lance. Lance clips into the handle for storage and transport. See page 48 for a full range of accessories to suit.

High quality heavy duty 5 litre compression sprayer; wide filling neck, rugged shut-off gun, adjustable nozzle, pressure relief valve, in-built pressure filter, brass lance. Lance clips into the handle for storage and transport. See page 48 for a full range of accessories to suit.

SW322-315

SW320

High quality heavy duty 9 litre compression sprayer for use with selected solvents and diesel; wide filling neck, rugged shutoff gun, adjustable nozzle, pressure relief valve, inbuilt pressure filter, brass lance. Lance clips into the handle for storage and transport. See page 48 for a full range of accessories to suit.

High quality heavy duty 7 litre compression sprayer; wide filling neck, rugged shut-off gun, adjustable nozzle, pressure relief valve, in-built pressure filter, brass lance. Lance clips into the handle for storage and transport. See page 48 for a full range of accessories to suit.

PAKMAN (fitted to sprayer)

SW550 16 litre 12 volt rechargeable electric sprayer; wide filling neck, rugged shut-off gun, adjustable nozzle, in-built pressure filter, brass lance. Lance clips into the handle for storage and transport. See page 48 for a full range of accessories to suit.

Chemical resistant foam back protector, designed to significantly increase comfort for prolonged spraying needs. Fits all Croplands 15 litre knapsack sprayers. A must for making spraying much more comfortable.

ORDER CODE

DESCRIPTION

SW319

Compression sprayer 5 litre

88.00

X

SW320

Compression sprayer 7 litre

96.00

X

SW322-315

Compression sprayer 9 litre – New solvent model

125.00

X

SW503

Knapsack 15 litre piston/diaphragm

204.65

X

SW540

New knapsack 15 litre piston pump with safety chamber and gauge on lance

229.00

X

SW189C

Knapsack sprayer 15 litre (diesel)

204.65

X

SW550

12 volt, 16 litre electric knapsack sprayer. Supplied charger required adaptor, not supplied.

499.00

X

PAKMAN

Back protector

59.88

X

Photos are for illustrative purposes only. Prices and specifications are subject to change without notice. Prices effective January 2014. For indicative freight prices, see page 111.

$ (EX. GST) PROD. CAT.

Optima BUYERS’ GUIDE – JANUARY 2014

47


Section 2

Sprayer Accessories

ACCESSORIES FOR CROPLANDS CropPak and SWISSMEX SPRAYERS Croplands spray lances, pictured below, are fitted to our range of CropPak sprayers, knapsack sprayers and compression sprayers. They can be used for a wide range of spraying applications up to 10 bar pressure. See below for information on the great range of booms, spray guards, extensions and other accessories that fit these lances.

Learn more about spray lances, scan the QR code

Spray lances SW-LANCE-ASSY

SW-LANCE-ADJ-AS

ORDER CODE

DESCRIPTION

SW-LANCE-ASSY

Complete spray gun with brass lance, adjustable nozzle and hose connector fitted (in-built pressure filter)

$ (EX. GST) PROD. CAT.

SW-LANCE-ADJ-AS Complete spray gun with extendable fibreglass lance, adjustable nozzle and hose connector fitted (in-built pressure filter)

39.95

Z

57.62

Z

Spray booms to fit the Lance assembly SW219-151C

SW219-138C SW219-148C SW219-147C 2-nozzle boom (narrow) SW219-140C ORDER CODE

DESCRIPTION

SW219-147C

2-nozzle boom, narrow (pictured above right)

$ (EX. GST) PROD. CAT. 20.52

Y

SW219-140C

2-nozzle boom, 500mm (above)

24.09

Y

SW219-148C

2-nozzle boom, 750mm (above)

28.27

Y

SW219-138C

3-nozzle boom, 1,000mm (above)

33.42

Y

SW219-151C

3-nozzle boom, 1,500mm (above)

39.63

Y

SW219-282C

4-nozzle boom, 1,500mm (not pictured)

52.53

Y

Extension lances and nozzles SW803-262C

SW219-143C SW219-142C

SW219-1236C

SW803-085

SW219-039C Learn more about extension lances, scan the QR code

XR8003-VK

48

ORDER CODE

DESCRIPTION

SW219-142C

1,000mm spray lance extension to fit Swissmex trigger assembly, with nozzle

21.45

Y

SW219-143C

1,500mm spray lance extension to fit Swissmex trigger assembly, with nozzle

27.66

Y

SW219-146C

2,000mm spray lance extension to fit Swissmex trigger assembly, with nozzle

34.19

Y

SW803-085

Brass spray lance, 520mm (standard lance), nozzle not included

15.93

Y

SW219-236C

Telescopic lance (to 940mm), with nozzle

21.30

Y

SW803-262C

Plastic adjustable nozzle complete with cap and gasket

5.44

Y

SW219-089C

Brass adjustable nozzle complete with cap and gasket

25.63

Y

XR8003-VK

80 degree flat fan nozzle for use with spray guard or lance

8.25

Y

www.croplands.com.au

$ (EX. GST) PROD. CAT.

Photos are for illustrative purposes only. Prices and specifications are subject to change without notice. Prices effective January 2014. For indicative freight prices, see page 111.


Section 2

Sprayer Accessories

Did you know? Did you know that Croplands range of CropPak sprayers use the Swissmex lance, so all the useful accessories on these two pages are suitable for use with the 12 volt CropPaks in section 1, page 24.

Spray guards to protect sensitive plants. Constant flow valve Did you know?

Learn more about spray guards, scan the QR code

SW219-099

SW219-117

SW219-852

ORDER CODE

DESCRIPTION

SW219-099

Herbicide spray guard, 400mm, large (above left)

SW219-117

Herbicide spray guard, 220mm, small (above centre)

SW219-85*

Constant flow valve, 1 bar to 3 bar pressure. *1 = 1 bar, 2 = 1.5 bar, 3 = 2 bar, 4 = 3 bar

Learn more about constant flow valves, scan the QR code

Did you know by fitting a constant flow valve to your lance (left), you can reduce pumping by up to 30% and have constant pressure at the nozzle.

$ (EX. GST) PROD. CAT. 12.11

Y

8.86

Y

48.90

Y

Common Replacement components and kits

Trigger, SW808-073C

Lid seal, SW501-002

Tail for trigger assembly, SW808-014

Diaphragm, SW503-031

Elbow from tank, SW502-191

Repair Service kit, SWRPK120

Tank Lid, SW502-001C

Repair Service kit, SWRPK503

Lid strainer, SW501-004

Repair Service kit, SWRPK189

To make repairs to your Croplands Swissmex knapsack or compression sprayer, see the options below ORDER CODE

DESCRIPTION

SW808-073C

Complete trigger assembly (pictured above)

25.18

Y

SWRPK120

Repair/service kit for SW319 and SW320 (pictured above)

24.13

Y

SWRPK189

Repair/service kit for SW189

22.23

Y

SWRPK189C

Repair/service kit for SW189C

48.27

Y

SWRPK503

Repair/service kit for SW503 (diaphragm not included in kit – not pictured)

25.33

Y

SW503-031

Diaphragm to suit SW503 Knapsack (pictured above)

15.00

Y

SW502-024C

Pump module for SW502 (not pictured)

62.65

Y

SW502-191

Elbow connector 90° – outlet to hose from tank (pictured above)

15.00

Y

SW808-014

Hose tail to fit ³∕8” (10mm) hose – attached to back of trigger assembly (pictured above)

6.70

Y

SW502-001C

Red tank lid – suits all models (pictured above)

20.57

Y

SW501-002

Lid seal (pictured above)

6.95

Y

SW501-004

Lid strainer (pictured above)

12.19

Y

Photos are for illustrative purposes only. Prices and specifications are subject to change without notice. Prices effective January 2014. For indicative freight prices, see page 111.

$ (EX. GST) PROD. CAT.

Optima BUYERS’ GUIDE – JANUARY 2014

49


Section 2

Apex sprayers

ASNS-1.5A

A range of handy sprayers for use in non-commercial situations. The compression sprayer range includes 1.5 litre, 5 litre and 10 litre models. The 15 litre model is a piston-type with shoulder straps and built in accumulator to hold pressure whilst in use. The rechargeable and battery operated 12 volt units have additional features with the added benefit of not requiring manual pumping, allowing the operator to concentrate solely on the application at hand. Specifications and features are listed by each model.

1.5 litre hand-held compression sprayer with: »» 1.5 litre capacity »» Suction strainer on the inlet tube »» Nickel-coated nozzle for longer life »» Excellent sealing for better compression and spraying quality

ASFM-5A

5 litre compression sprayer with: »» Pressure relief valve to avoid over-pressurisation and to relieve pressure prior to emptying »» Trigger gun with 450mm lance and adjustable nozzle »» 1.2 metre hose length »» Lance is vertically stored »» Positive pump action »» Light weight (1.4kg empty) »» 100mm filling neck with splash-shield rim

ASFM-10A

10 litre compression sprayer with: »» Pressure relief valve to avoid over-pressurisation and to relieve pressure prior to emptying »» Trigger gun with 450mm lance and adjustable nozzle »» 1.2 metre hose length »» Lance is vertically stored »» Positive pump action »» Light weight (1.8kg empty) »» 125mm filling neck with splash-shield rim

ASNS-15FB ASNS-1.5A

ASFM-5A ASFM-10A

15 litre piston-type knapsack sprayer with: »» Internal pressure accumulator to keep pressure and avoid constant pumping, complete with pressure selection adjustment »» Left or right side pump lever action »» 100mm lid with strainer and integrated seal to avoid leaking »» 1.2 metre hose length »» Trigger gun with 500mm lance and adjustable nozzle and flat fan option »» Light weight (3.8kg empty) »» Waist strap to keep unit stable whilst in use

ASGS-10

»» »» »» »» »» »» »»

ASNS015FB

Granular applicator for spreading granulated formulations and fertilisers Clear lid to see what product is left Adjustable for application rate and direction Fully enclosed and lubricated gearbox Padded shoulder straps 10 litre capacity Spreading width approximately up to 5 metres (depending on material being spread)

ASGS-10

Sprayers and Applicators

50

ORDER CODE

DESCRIPTION

ASNS-1.5A

1.5 litre compression sprayer

21.95

Y

ASFM-5A

5 litre compression sprayer with lance

33.95

Y

ASFM-10A

10 litre compression sprayer with lance

45.95

Y

ASNS-15FB

15 litre piston-type knapsack sprayer with lance

79.95

Y

ASGS-10

10 litre granular applicator

79.95

Y

www.croplands.com.au

$ (EX. GST) PROD. CAT.

Photos are for illustrative purposes only. Prices and specifications are subject to change without notice. Prices effective January 2014. For indicative freight prices, see page 111.


Section 2

apex sprayers

ASBBS-10

10 litre battery-powered sprayer with: »» Wide filling lid with integrated carry handle – can be carried by hand or worn on your back »» Requires 4 D-size batteries (not supplied) »» 1 L/min pump output from diaphragm pump »» Touch button operation »» Ideal for the home garden

ASBBS-16

16 litre battery-powered knapsack sprayer with: »» Rechargeable 12 volt sealed lead/acid battery; voltmeter to see charge level at a glance »» Large battery gives longer spraying time – approximately 4 hours continuous use from full charge »» Large filling lid »» 12 volt diaphragm pump for positive spraying pressure

ASAT-30M3

30 litre trolley sprayer complete with: »» 3 L/min (open-flow) 12 volt diaphragm pump »» Heavy duty 12 volt rechargeable lead-acid battery »» Large filling lid »» Large drain for emptying and complete clean out »» Lance with adjustable nozzle »» Handy hose reel with 9 metres spray hose

ASBBS-10

ASBBS-16

AS3WF-5 12 litre motorised mist blower with: »» 77cc displacement 2-stroke petrol motor (requires premix) »» 1.9 litre fuel capacity »» Electronic ignition »» 12 litre liquid capacity »» Padded back rest and shoulder straps »» Enclosed, protected fan unit »» Ergonomic handle for spraying outlet »» Requires the use of hearing protection as noise level is over 90db

SPRAY GUARDs Small and large spray guards to suit compression sprayers (FM-5A, FM-10A, NS-15FB)

ASGRD-01

ASGRD-02

AS3WF-5

ASAT-30M3

Sprayers and Accessories ORDER CODE

DESCRIPTION

ASBBS-10

10 litre rechargeable battery-pack sprayer with lance

159.95

Y

ASBBS-16

16 litre 12 volt rechargeable knapsack sprayer

176.00

Y

ASAT-30M3

30 litre trolley sprayer with 3 L/min pump (open-flow)

470.00

Y

AS3WF-5

12 litre mist-blower knapsack sprayer

710.00

Y

ASGRD-01

Spray guard – small

12.00

Y

ASGRD-02

Spray guard – large

15.50

Y

ASAT-30M3-1

Charger for trolley sprayer

105.00

Y

Photos are for illustrative purposes only. Prices and specifications are subject to change without notice. Prices effective January 2014. For indicative freight prices, see page 111.

$ (EX. GST) PROD. CAT.

Optima BUYERS’ GUIDE – JANUARY 2014

51


Section 2

Diesel Transfer Units

DIESEL ADBLUE UNITS

Quick Guide »» Auto shut-off gun prevents spillage when filling (except US100AB)

US100AB

Lockable pump cover Piusi urea pump, 12 volt, 35 L/min (open-flow) 4 metres delivery hose L = 710mm, W = 800mm, H = 475mm

»» Baffled tanks (except 100 litre) prevents excessive liquid movement »» Self-draining top stops pooling of diesel on tank »» Internal suction filter helps prevent contamination »» Swivel on filling gun assists with hose storage and filling »» Earth strap removes static build up

US200DN

Lockable pump cover Piusi vane pump, 12 volt, 50 L/min (open-flow) Auto shut-off gun with swivel 4 metres delivery hose L = 1,180mm, W = 800mm, H = 475mm

US400DSQ

Lockable pump cover Piusi vane pump, 12 volt, 50 L/min (open-flow) Auto shut-off gun with swivel 4 metres delivery hose L = 1,650mm, W = 800mm, H = 600mm

52

»» Side handles (200/400) for easier demounting and storage »» Optional electronic diesel counter – see page 53

US400DS

Lockable pump cover Piusi vane pump, 12 volt, 50 L/min (open-flow) Auto shut-off gun with swivel 4 metres delivery hose L = 1,180mm, W = 800mm, H = 795mm

ORDER CODE

DESCRIPTION

US200DN

200 litre fully baffled diesel transfer unit with 12 volt Piusi vane pump

1,399.00

X

US400DSQ

400 litre fully baffled squat tank diesel transfer unit with 12 volt Piusi vane pump

1,799.00

X

US400DS

400 litre fully baffled high tank diesel transfer unit with 12 volt Piusi vane pump

1,799.00

X

US100AB

100 litre AdBlue transfer unit with 12 volt Piusi AdBlue pump

1,799.00

X

www.croplands.com.au

$ (EX. GST) PROD. CAT.

Photos are for illustrative purposes only. Prices and specifications are subject to change without notice. Prices effective January 2014. For indicative freight prices, see page 111.


Section 2

Diesel Transfer Units

Accessories and options PI-F00201AA0

PI-F00618000

PI-F00225480

PI-F00408100

PI-F00231070

PI-F00750100

PI-F0033208A

PI-F00212000

SuzzaraBlue 12 volt self-priming urea transfer pump kit; 35 L/ min, 22 amps, 6 metres ¾” hose with foot-valve, 2 metres electric cable with on/off switch, manual shut-off nozzle. Ideal to fit up to an existing tank.

Diesel pump kit, includes Piusi self-priming 12 volt vane pump, up to 50 L/min flow, suction capacity to 2 metres, 2 metre power cable, foot valve and 6 metres hose, auto shut-off gun.

Excellent diesel transfer pump kit in a very handy carry case. Self-priming 12 volt 45 L/min Piusi pump, fuel filter, 6 metres hose, foot valve and shut-off gun. Chuck it in the ute and take it anywhere.

High quality Piusi Suzzarablue rotary hand pump with dropdown suction kit and 3 metres of delivery hose and simple spout. Ideal for quick connection to a 200 litre AdBlue™ drum.

ORDER CODE

DESCRIPTION

PI-F00201AA0

Adblue pump kit

PI-F00212000

Auto hosereel 14 metre 45lpm, pump and gun complete

PI-F00225480

High quality Piusi Suzzarablue auto-shut-off nozzle – capable of up to 80 L/min delivery, with swivel fitted.

High quality K24 electronic meter – suitable for diesel – can be fitted into the line prior to the gun on Croplands’ diesel transfer units or your own system. Sturdy case, digital display, uses two AAA batteries.

Quality steel retractable hose reel for diesel use, 14 metres ¾” high-quality hose and 1” male end fitting, 1” female inlet. Less than 0.6 bar pressure loss at 60 L/ min flow. Use your existing diesel pump and gun to hook up to this reel for those larger in-field applications.

Piusi Pitstop automatic retractable reel for diesel use, complete with 45 L/min self-priming 12 volt Piusi pump, 14 metres of delivery hose, on/off switch, auto shut-off gun with swivel, sturdy base and fuel filter – ready to hook up straight to your diesel tank and get wpumping!

$ (EX. GST) PROD. CAT. 980.00

X

2,670.00

X

Diesel pump and hose kit

489.00

X

PI-F00231070

Piusibox fuel transfer kit

650.00

X

PI-F0033208A

Rotary hand pump for AdBlue

240.00

X

PI-F00408100

Diesel counter electronic k24

326.20

X

PI-F00618000

Auto stop nozzle adblue sb32

415.00

X

PI-F00750100

Hose reel 14 metre 20mm hose

1,050.00

X

Photos are for illustrative purposes only. Prices and specifications are subject to change without notice. Prices effective January 2014. For indicative freight prices, see page 111.

Optima BUYERS’ GUIDE – JANUARY 2014

53


Section 2

Spreaders

TRAILED 150 FERTILISER AND SEED SPREADER

»» Spun-steel hopper, hot-dip galvanised

140 litre capacity spreader with galvanised steel hopper

»» Aluminium-cased gearbox with sealed bearings

The SIT-FSP150C trailed spreader utilises a ground drive system from one wheel via a sealed gearbox to turn the spinner and product agitator in the hopper. The towing vehicle will typically be a small tractor, ATV or RTV 4-wheeled vehicle or similar with a towbar that can hook up to the clevis-type drawbar on the spreader via a 15mm pin. Ideal for fertiliser and seed spreading in lawns, turf areas and pasture, the SIT-FSP150C will give years of use if well maintained and cleaned after use.

Quick Guide »» Pressed tubular frame, epoxy painted

»» 15 x 6.00 pneumatic 2-ply turf tyres »» Adjustable height drawbar with 5 height settings »» 5-position adjustment for output utilising a simple lever and preset lock-nut »» Length 1,400mm »» Height 1,350mm »» Width 900mm »» Capacity of fertiliser 75–100kg* *Will vary depending on product being used

fertiliser type

typical speed range (km/hr)

Approx Spreading width* (metres)

Coarse Grain Fertiliser

8–12

6–8

Medium Grain Fertiliser

8–12

5–7

Fine Grain Fertiliser

8–12

5–6

Medium Grain Crystalline Fertilisers

8–12

4–5

Ammonium Sulphate

8–12

6–8

SIT-FSP150C

54

ORDER CODE

DESCRIPTION

SIT-FSP150C

150 trailed spreader

1,525.00

X

SIT-FS300C

300 3-PTL spreader

980.00

X

SIT-FS500C

500 3-PTL spreader

1,040.00

X

SITFSP150

150 trailed spreader unassembled

1,425.00

X

SIT-FS300

300 3-PTL spreader unassembled

880.00

X

SIT-FS500

500 3-PTL spreader unassembled

940.00

X

www.croplands.com.au

$ (EX. GST) PROD. CAT.

Photos are for illustrative purposes only. Prices and specifications are subject to change without notice. Prices effective January 2014. For indicative freight prices, see page 111.


Spreaders Section 2

LINKAGE 300 FERTILISER AND SEED SPREADER

LINKAGE 500 FERTILISER AND SEED SPREADER

250 litre capacity spreader with galvanised steel hopper

340 litre capacity spreader with galvanised steel hopper

The SIT-FS300C linkage spreader utilises a PTO (power takeoff) drive system via a driveshaft (supplied) to turn the spinner for spreading fertiliser or seed. Ruggedly built, the all steel construction spreader is designed for use with small tractors capable of safely lifting up to 400kg fitted with a 540RPM PTO-shaft and three-point linkage points. Ideal for fertiliser and seed spreading in grasslands, crops, turf areas and pasture, the SIT-FS300C will give years of use if well maintained and cleaned after use. For information and spreading table vist www.coplands.com.au

The SIT-FS500C linkage spreader utilises a PTO (power takeoff) drive system via a driveshaft (supplied) to turn the spinner for spreading fertiliser or seed. Ruggedly built, the all steel construction spreader is designed for use with small tractors capable of safely lifting up to 500kg fitted with a 540RPM PTO-shaft and 3-point linkage points. Ideal for fertiliser and seed spreading in grasslands, crops, turf areas and pasture, it will give years of use if well maintained and cleaned after use. 3 easily selectable spreading patterns. Spreading disc with 4 rotor blades able to be set in 5 positions.

SIT-FSP150C

SIT-FS300C

300 | 500 ACCESSORIES SINGLE SIDE CONVEYOR KIT Side throw conveyor is ideal for side spreading (SIT400.168) To suit FS 300/500

DOUBLE DISCHARGE CONVEYOR KIT Side throw conveyor is ideal for side spreading (SIT400.215) To suit FS 300/500

AGITATOR KIT Articulated Agitator is recommended when spreading powdery fertilisers and lime (SIT400.200) To suit FS 300/500

ORDER CODE

DESCRIPTION

SIT400.168

Side throw conveyor

532.00

X

SIT400.215

Double discharge conveyor

670.00

X

SIT400.200

Agitator kit

75.00

X

Photos are for illustrative purposes only. Prices and specifications are subject to change without notice. Prices effective January 2014. For indicative freight prices, see page 111.

$ (EX. GST) PROD. CAT.

Optima BUYERS’ GUIDE – JANUARY 2014

55


Section 2

Guns, Hoses and Accessories 5

4

6 1 2 10

3

9

7 and 8 12 11

Spray Guns and Lances ORDER CODE

#

DESCRIPTION

SW-LANCE-ASSY

1

Swissmex gun and lance

39.95

Z

SW-LANCE-ADJ-ASSY 2

Swissmex gun and extendable lance

57.62

Z

RL10

3

RL10 gun with 500mm steel lance, adjustable nozzle

79.63

Z

AA30L-PP

4

TeeJet GunJet poly spray gun, 10 bar (150 psi)

109.04

Z

AA30L-Âź

5

TeeJet GunJet drip-free spray gun, 17 bar (250 psi)

143.29

Z

AA31

6

TeeJet forged brass trigger gun, 35 bar (500 psi)

143.10

Z

AA43HA-8

7

TeeJet heavy-duty high pressure gun, 55 bar (800 psi)

265.00

Z

AA43LA-8

8

TeeJet heavy-duty medium pressure gun, 14 bar (200 psi)

265.00

Z

B26.901.165MK2

9

Turbo 400 with metal grip and protected lever, 50 bar (725 psi)

169.00

Z

B46.901.46RG

10 Turbo 400RG gun with ergonomic grip and positive-notch droplet selection, 40 bar (580 psi)

230.00

Z

B7.901.10

11 Evolution turbine gun, 60 bar (850 psi)

278.32

Z

B35.901.16

12 Spot spray gun, pistol type, 40 bar (580 psi)

149.00

Z

Hoses ORDER CODE

Description

HCVT20 HSC20 HEP25 HEP32 HEP40 HPW10 HPW10/40 HPW10-30 HPW10-100 HPW12 HPW12/40 HPW12-30 HPW12-100 HPW20 HPW20-50 HPW25 HPW32

Hose 20mm vinyl clear Clear wire spiral hose, 20mm Hose 25mm suction (black) Hose 32mm suction (black) Hose 40mm suction (black) Hose 10mm 20 bar for pesticide and herbicide Hose 10mm 40 bar for pesticide and herbicide Hose 10mm 20 bar for pesticide and herbicide (30 metres) Hose 10mm 20 bar for pesticide and herbicide (100 metres) Hose 12mm 20 bar for pesticide and herbicide Hose 12mm 40 bar for pesticide and herbicide Hose 12mm 20 bar for pesticide and herbicide (30 metres) Hose 12mm 20 bar for pesticide and herbicide (100 metres) Hose 20mm 20 bar for pesticide and herbicide Hose 20mm 20 bar for pesticide and herbicide (50 metres) Hose 25mm 20 bar for pesticide and herbicide Hose 32mm 20 bar for pesticide and herbicide

Clamps

56

$ (EX. GST) PROD. CAT.

$ (EX. GST) PROD. CAT. 5.31 23.94 8.48 9.71 15.32 3.86 4.65 100.05 341.09 4.71 6.67 125.07 373.93 8.48 310.42 10.32 17.05

HSC20

Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y

HPW10 HPW12 HPW20/25 HPW32 HEP25 HEP32 HEP240

Cobra clamps

ORDER CODE

Description

COBRAC13/8 COBRAC15/8 COBRAC18-19/8 COBRAC24/8 TR38HC TR12HC TR34HC TR1HC TR114HC TR112HC TR2HC TR3HC

Cobra clamp for HPW 08 Cobra clamp for HPW 10 Cobra clamp for HPW 12 Cobra clamp for HPW 20 Hose clamp 10mm steel band worm drive Hose clamp 12mm steel band worm drive Hose clamp 20mm steel band worm drive Hose clamp 25mm steel band worm drive Hose clamp 32mm steel band worm drive Hose clamp 40mm steel band worm drive Hose clamp 50mm steel band worm drive Hose clamp 75mm steel band worm drive

www.croplands.com.au

$ (EX. GST) PROD. CAT. 0.91 1.00 1.14 1.21 2.65 2.73 2.96 3.03 3.11 3.19 3.50 7.81

Z Z Z Z Z Z Z Z Z Z Z Z

Hose clamps

Photos are for illustrative purposes only. Prices and specifications are subject to change without notice. Prices effective January 2014. For indicative freight prices, see page 111.


Section 2

Hosereels and Pressure Gauges

Hosereels

L-R3000

L-R0160

Croplands range of manual hose reels include nine models listed below that are made of steel. A steel reel, complete with high quality fittings, will last years and is a good investment for that reason. The steel on the reel itself is sand-blasted and powder coated for high corrosion resistance. A galvanised base on the larger base-mount models is heavy duty and hot dip zinc plated. The smaller L-R0150 reel has a clever swivel-base design and locking pin. All Croplands spray hose is specifically made for Croplands – the pressure hose in particular has added longitudinal nylon fibres to ensure the hose will not stretch, along with added nitrile compound internally so it will not break down and de-laminate like cheaper hose often does. Being black in colour our hose resists sun damage for many years longer than coloured hose. L-R0240

H

W W=220mm H=490mm

L-R0250

L-R0260

L-R0230

L-R2412

H H

H

W L=450mm W=270mm H=560mm

L

W

H

W

W

L

L=450mm W=540mm H=510mm

H

W=200mm H=450mm

W

L

L=580mm W=270mm H=630mm

L=450mm W=270mm H=560mm

*All bare capacities are for 10mm spray hose. L=length, W=width, H=height; dimensions may change without notice and do not include side-bracket on side-mount reels. ORDER CODE DESCRIPTION

$ (EX. GST) PROD. CAT.

L-R0150

Lighter duty steel reel, bare, 30 metres of 10mm hose capacity. Swivel base and reel lock standard

175.00

X

L-R0160

Lighter duty steel reel, 20 metres of 10mm hose fitted, RL10 gun supplied. Swivel base and reel lock standard

356.25

X

L-R0240

Base mount model, 50 metre capacity* (bare reel)

348.68

X

L-R1412

Base mount model comes with 30 metres of 10mm spray hose and Turbo 400 spray gun

598.80

X

L-R1412HP As per L-R1412 with but high pressure hose fitted (40 bar)

785.76

X

L-R0260

Side-mount (with bracket), 50 metre capacity* (bare reel)

310.76

X

L-R2412

Side-mount (with bracket), comes with 30 metres of 10mm spray hose and Turbo 400 spray gun

560.90

X

L-R2412HP As per L-R2412 but with high pressure hose (40 bar)

811.25

X

L-R0250

Large base mount model, 100 metre capacity* (bare reel)

591.23

X

L-R0230

Slim-line steel hose reel, galvanised base mount model, 100 metre capacity* (bare reel)

436.59

X

L-R3000

High-impact poly reel, spring retractable; 16 metres of 10mm spray hose and threaded end-fitting (no gun fitted)

333.51

X

Pressure Gauges Glycerine-filled gauges in 63mm and 100mm sizes.

L-G1432

L-G1426

L-G1626

A908006

ORDER CODE

DESCRIPTION

MAX PRESS BAR

MAX PRESS KPA

MAX PRESS PSI

A908006

Pressure guage, 40mm, 0-600 KPa

6

600

90

33.67

Y

L-G1426

Isometric pressure gauge, 63mm, ¼” bottom-entry

25

2,500

360

35.78

Y

L-G1425

Pressure gauge, 63mm, ¼” bottom-entry

25

2,500

360

35.78

Y

L-G1430

Pressure gauge, 63mm, ¼” bottom-entry

40

4,000

580

35.78

Y

L-G1432

Pressure gauge, 63mm, ¼” bottom-entry

60

6,000

870

35.78

Y

L-G1602

Pressure gauge, 100mm, ¼” bottom-entry

25

2,500

360

84.14

Y

L-G1611

Pressure gauge, 100mm³∕8” bottom-entry

16

1,600

230

84.14

Y

L-G1612

Pressure gauge, 100mm, ³∕8” bottom-entry

25

2,500

360

84.14

Y

L-G1660

Pressure gauge, 100mm, ³∕8” bottom-entry

60

6,000

870

84.14

Y

L-G1626

Isometric pressure gauge, 100mm, ³∕8” bottom-entry

25

2,500

360

84.14

Y

Photos are for illustrative purposes only. Prices and specifications are subject to change without notice. Prices effective January 2014. For indicative freight prices, see page 111.

$ (EX. GST)

Optima BUYERS’ GUIDE – JANUARY 2014

PROD. CAT.

57


Section 2

Safety with Chemical Application

Kasco Helmet/Respirator and Filters

L-H3300

KASCO-0601/19

L-H3016

ORDER CODE

DESCRIPTION

L-H3016

K80-T9R respirator complete with helmet, blower unit and belt, single filter and 12 volt cable-charger for connection to a continuous 12 volt power source such as a tractor or vehicle. This unit will operate for approximately 30 minutes without the 12 volt power source from a small battery in the blower unit. Optional 240 volt charger available to charge the battery for 30 minutes of use if required as a stand-alone function. Designed to be continuously powered while in use. Agricultural use only

$ (EX. GST) PROD. CAT.

KASCO-0105/067

Optional 240 volt charger for the L-H3016 model

L-H3017

K80-T5 respirator complete with helmet, blower unit and belt, single filter and rechargeable battery pack – also carried on the belt. Designed to be charged overnight and powered by the battery pack during use. Approximately 6 hours operating time for 1 overnight charge. This will diminish as batteries degrade. For agricultural use only. Unit not pictured

KASCO-0601/19 KASCO-0601/25

1,667.53

X

333.90

X

1,667.53

X

ZA2P3 filter for Kasco units, each

112.95

X

ZA2B2P3 filter for Kasco units, suited for HiCane applications

175.00

X

Mask Respirators and Filter Options ORDER CODE

DESCRIPTION

L-H3300

SR100 silicone mask for superior face seal. Double anti-clog exhaust valves, filter not included.

$ (EX. GST) PROD. CAT. 155.54

X

L-H3500

Particle filter P3 (210/310) particles, wet and dry dust, aerosols, mould, bacteria, viruses, smoke, mist, fumes

40.93

X

L-H3501

Pre-filter 221-1 (pack of 10)

13.64

X

L-H3502

Gas filter A1 (217) organic vapour such as solvents – regular capacity

44.42

X

L-H3503

Gas filter A2 (218) organic vapour such as solvents – high capacity

54.57

X

L-H3505

Gas filter ABEK1 (297) organic vapour such as solvents and inorganic vapour, acid gas and ammonia

47.75

X

Chemical Transfer

Quick Guide »» Easy and accurate chemical transfer is achieved with the Flowserve range of chemical transfer units

SHUSF-1105PTS

»» Each pump has nylon housing with Viton seals to ensure maximum performance for today’s agricultural chemicals

L-H9353B

SHUSF-1105

58

SHUFM-1100

L-H9556

»» A multiple pump-chamber design ensures long life and durability

L-H9562

ORDER CODE

DESCRIPTION

SHUSF-1105PTSI

The Agrunner portable mini bulk transfer system uses a 12 volt Shurflo chemical transfer pump for pumping liquid agricultural chemicals from bulk containers into chemical mixers or spray tanks. The unit has a handy carry frame to protect the pump unit, pump-mounted flow indicator, 6 metres of power cable, shut-off gun, 4 metres discharge hose, and a camlock inlet fitting with shut-off and 4 metres inlet hose

SHUSF-1105

12 volt Shurflo pump unit only, Viton valves, santoprene diaphragms with internal bypass and 6 metre power cable. On/off switch on the pump. 29 L/min output at 15 psi pressure. Draws 14 amps

SHUFM-1100

Pump-mounted electronic flowmeter with LCD display and long-life lithium battery

L-H9353B

60 litre chemical mixer on trolley, no pump

$ (EX. GST)

PROD. CAT.

1,950.00

X

950.00

X

399.00

X

2,270.00

X

L-H9562

3 pin Envirodrum male coupling

554.95

X

L-H9556

3 pin Envirodrum rinsing socket (must be connected to fresh water source)

303.49

X

www.croplands.com.au

Photos are for illustrative purposes only. Prices and specifications are subject to change without notice. Prices effective January 2014. For indicative freight prices, see page 111.


Safety with Chemical Application Section 2

Measuring Jugs and Mixing Bucket

L-9001

L-9003

L-9005

Quick Guide »» A must for measuring and mixing chemicals, and for sprayer or nozzle calibration

TD109024901

L-9025

NEW

ORDER CODE

DESCRIPTION

L-H9001

Croplands calibrated 1 litre measuring jug

$ (EX. GST) PROD. CAT. 15.00

X

L-H9003

Croplands calibrated 3 litre measuring jug

21.15

X

L-H9005

Croplands calibrated 5 litre measuring jug

28.00

X

L-H9025

Croplands heavy-duty 25 litre calibrated mixing bucket with pouring spout

60.04

X

TD109024901

Quick Check 2 litre calibration jug for quickly and easily calibrating your sprayer. The jug has a scale for a nozzle check from sizes 015 to 06. It will give the application rate (standard 500mm nozzle spacing) from 50–800 litre/Ha at speeds from 5–18 km/h (at max. speed, 200 L/ha is maximum). All the key information such as pressure, application speed, flow rate and application rate can be read off the jug for different nozzle sizes

26.95

X

Tank and Equipment Cleaner and Protectant

Quick Guide »» Thoroughly clean your sprayer when changing from one pesticide to another with Spraymate™ tank and equipment cleaner »» Powerful detergents remove residues from inaccessible areas in the tank and spray lines L-H9704

ORDER CODE

DESCRIPTION

$ (EX. PROD. GST) CAT.

L-H9704

Spraymate tank and equipment cleaner, 600g

24.19

»» It also removes rust and hard water scale and leaves a protective film to prevent corrosion during storage, prolonging the life of your sprayer

X

Spraysuits

Quick Guide

ORDER CODE

DESCRIPTION

$ (EX. PROD. GST) CAT.

»» Tyvek® Barrier Man Coveralls are disposable coveralls designed to protect workers from hazardous materials, or sensitive products and processes from contamination by people. Available in white, sizes medium to XXL

L-H230*

Disposable protective suit. Suitable for single or limited repeat use for protection against dust while mixing chemicals. Not rainfast. *Denotes size as follows: 1 = Medium; 2 = Large; 4 = XL; 5 = XXL

22.22

»» Please specify size

X

Gloves

Quick Guide L-H700 $ (EX. PROD. GST) CAT.

ORDER CODE

DESCRIPTION

L-H700*

Nitrile protective spray gloves, 330mm. *Denotes size as follows: 3 = size 10; 5 = size 11

13.64

X

L-H710*

Nitrile protective spray gloves, long, 460mm. *Denotes size as follows: 2 = size 9; 3 = size 10; 4 = size 11

25.70

X

L-H7003

Photos are for illustrative purposes only. Prices and specifications are subject to change without notice. Prices effective January 2014. For indicative freight prices, see page 111.

»» Offers resistance to solvents and oils with good flexibility and dexterity. Excellent abrasion and puncture resistance »» Sizes: 9–11. Please specify size

Optima BUYERS’ GUIDE – JANUARY 2014

59


Section 2

Firefighters

Firefighters

US400/FF with Honda/Onga pump

Shown left – 3 metre external suction kit comes standard with all Croplands complete firefighter units US1100/FF with Honda/Onga pump

US500/FF1

Did you know? All Croplands firefighters are powered by genuine Honda motors. The Honda motor uses an advanced electronic ignition with automatic compression release providing effortless starts in all weather and conditions.

SHUB55H

BT1100/FF

60

SHUMB25LK

ORDER CODE

DESCRIPTION

$ (EX. GST)

SHUMB25LK

Miniblaze firefighter kit, 2.5HP petrol motor. Also suitable for tank filling and general water transfer. Kit includes a 2.5HP close coupled 4-stroke petrol motor, powder coated alloy pump casing, quick fill priming port, 1” discharge, 5 metres of 20mm fire hose with nozzle, 2.5 metres of 25mm suction hose with filter plus tool kit. Flow rate range from 50 to 150 L/min depending on pressure

SHUB55H

PROD. CAT.

650.00

X

Honda GX160 powered Onga firefighter pump. Also suitable for tank filling, water transfer and some irrigation situations. Industrial grade nylon impeller, powder-coated high-grade alloy pump casing, 3-way discharge outlets, close coupled direct engine drive, large carry handle and light weight. Large 1½” priming port for quick prime and flow rate from 100 to 500 L/min depending on required pressure (in the 2–5 bar range). Note – price for pump unit only

1,560.00

X

US400/FF

400 litre firefighter comes with Honda GX160 powered Onga firefighter pump (as described above), firefighting reel with 30 metres of 20mm hose, adjustable nozzle and 3 metre suction hose kit

4,410.00

X

US500/FF1

500 litre firefighter unit on steel skid frame – Honda GX160 powered Onga pump fitted with 500 litre round tank mounted on skid frame – complete with 30 metres of 20mm hose, adjustable nozzle and 3 metre suction hose kit

4,380.00

X

US800/FF

As for US400/FF, but fitted with an 800 litre tank (not pictured)

5,154.00

X

US1100/FF

1100 litre firefighter with free-standing tank, Honda GX160 powered Onga firefighter pump (as described above), firefighting reel with 30 metres of 20mm hose, adjustable nozzle and 3 metre suction hose kit

5,445.00

X

BT1100/FF

1100 litre trailing firefighter comes with fully galvanised chassis, sprung axle, 11.5/80 x 15.3 tubeless tyres, Honda GX160 powered Onga firefighter pump (as described above), 30 metres of 20mm hose, adjustable nozzle and 3 metre suction hose kit

7,625.00

X

BT1500/FF

As BT1100/FF, but fitted with 1500 litre tank

7,940.00

X

www.croplands.com.au

Photos are for illustrative purposes only. Prices and specifications are subject to change without notice. Prices effective January 2014. For indicative freight prices, see page 111.


Section 2

Grain storage and hay baling applications

Grain storage and hay baling applications

Quick Guide Baler Preservative Applicator System

»» Safely bale at higher moisture levels »» Aids in lower leaf loss »» Assists in higher nutritional levels »» More efficient use of machinery

»» Reduce likelihood of spontaneous combustion »» Upgradeable to include in-cab monitoring and alarm system, see option details below »» Suitable for all hay additives sold in Australia and New Zealand Intake auger applicator, L-H9353-2100

Grain kit, UGA12V

»» Nozzle and pressure calculator available online at: www.gazeeka.com.au/calc.html

Optional Controller for Baler Applicators In-cab control system for the 100 litre and 200 litre baler application units Features: »» Automatic calculation of pressure from dose rate and TPH »» Automatic pressure control by pump speed control »» Pressure monitoring displayed in the tractor cab »» Pump on/off control from tractor cab »» Visual and audible alarms for maximum/ minimum pressure 200 litre square baler preservative applicator, BS200F

Intake™ Auger Applicator

»» Use to apply fungicides such as Intake™ to fertiliser on grain augers »» Can also be used to apply seed dressings »» Bypass agitator provides constant agitation »» Customisable to suit your own set-up »» Constant agitation allows use of viscous liquids »» Available in standard and high flow models

12 Volt Grain Kit 100 litre round baler preservative applicator, RB100F

This 12 volt grain kit attaches to the auger and provides a simple way of putting preservative on your grain.

Baler application unit ORDER CODE

DESCRIPTION

RB100F

100 litre round baler preservative applicator

$ (EX. GST) PROD. CAT. 2,015.00

W

RB100F485

100 litre round baler preservative applicator with in-cab control system

5,640.00

W

BS200F

200 litre square baler preservative applicator

2,595.00

W

BS200F485

200 litre square baler preservative applicator with in-cab control system

6,660.00

W

BS200F485/QS30

200 litre square baler preservative applicator with in-cab control system and infrared sensor

7,995.00

W

Auger application system and 12 volt Grain application kit ORDER CODE

DESCRIPTION

L-H9353-2100A

60 litre auger applicator with 4.6 L/min pump

2,333.50

W

L-H9353-252A

60 litre auger applicator with 25 L/min pump

3,113.50

W

UGA12V

Grain application kit, 12 volt

851.99

X

Photos are for illustrative purposes only. Prices and specifications are subject to change without notice. Prices effective January 2014. For indicative freight prices, see page 111.

$ (EX. GST) PROD. CAT.

Optima BUYERS’ GUIDE – JANUARY 2014

61


Section 2

sprayer Tanks

Spray tanks

D1

F1

X E1 Y Z

All tanks are supplied with a lid and outlet. All prices are ex-store. Dimensions may change without notice. Order Code

Position

Litre Capacity

L

Dimensions (mm) W

H

Strainer

Freestanding

P100L

A

100

440

440

810

No

Yes

$ (EX. GST) 234.97

PROD. CAT. X

P60L

B

60

440

440

545

No

Yes

219.81

X

P50

H

50

450

410

400

Yes

No

212.23

X

P120

I

120

610

470

600

Yes

No

250.13

X

P30

J

30

280

280

600

No

No

159.17

X

P300

K

300

1,100

550

550

Yes

No

439.63

X

P200

L

200

900

600

600

Yes

No

378.98

X

P450

M

450

1,070

750

580

Yes

No

621.53

X

P400C

N

400

1,190

760

650

Yes

No

682.17

X

P500C

O

500

1,190

760

825

Yes

No

736.66

X

P1500

P

1,500

1,350

1,200

1,100

Yes

No

1,970.72

X

P1200

Q

1,200

1,350

1,200

950

Yes

No

1,743.34

X

P1000

R

1,000

1,350

1,200

800

Yes

No

1,591.73

X

P500

S

500

1,200

600

1,100

Yes

No

682.17

X

P700

(not shown)

700

1,350

640

1,200

Yes

No

788.29

X X

P1000L

T

1,000

1,350

800

1,500

Yes

No

1,364.34

P2000

U

2,000

2,200

1,300

1,030

Yes

No

2,273.91

X

P3000

V

3,000

2,200

1,300

1,300

Yes

No

2,880.28

X

P4000A

W

4,000

2,200

1,300

1,670

Yes

No

3,335.07

X

P200B

X

200

1,160

580

539

Yes

Yes

644.73

X

P400

Y

400

1,490

627

760

Yes

Yes

1.094.50

X

P800

Z

800

1,740

1,000

770

Yes

Yes

2,106.25

X

P125L

D1

125

440

440

960

No

Yes

222.31

X

P200A

(not shown)

200

1,220

700

510

Yes

No

666.88

X

P300A

E1

300

1,220

700

610

Yes

No

706.75

X

P1100

F1

1,100

1,430

1,275

855

Yes

Yes

1,837.30

X

Dimensions may vary from tank to tank.

62

www.croplands.com.au

Photos are for illustrative purposes only. Prices and specifications are subject to change without notice. Prices effective January 2014. For indicative freight prices, see page 111.


 Section 3

Nozzle bodies and boom components������������ 64

Nozzle Caps������������������������ 65

Electric control kits, monitors and  GPS system��������������������������� 66

monitors and controllers������������������������ 67

Electronic valves and controllers���������������� 68

Electric and manual valve kits and parts���������� 69

Suction filters�������������������� 70

Pressure Filters������������������� 73

Manual ball Valves������������ 74

Agitators, lids and tank fittings����������������������� 75

Sprayer tools��������������������� 76

Windmate���������������������������� 76

Photos are for illustrative purposes only. Prices and specifications are subject to change without notice. Prices effective January 2014. For indicative freight prices, see page 111.

Optima BUYERS’ GUIDE – JANUARY 2014

63


Section 3

Nozzle bodies and filters and boom components

Nozzle Bodies Order Code

DESCRIPTION

QJ17560A-½-NY

Nozzle body, non-drip, ½” fits 22mm O.D. tube

$ (EX. GST) PROD. CAT. 9.31

Z

QJ17560A-3/4NY

Nozzle body, non-drip,3/4” fits 25.4mm O.D. tube

9.31

Z

QJ17560A-1-NY

Nozzle body, non-drip,1” fits 33.4mm O.D. tube

9.31

Z

PR16

Pack of 5 x QJ17560A-½-NY nozzle bodies

45.49

Z

PR17

Pack of 5 x QJ17560A-¾-NY nozzle bodies

45.49

Z

QJ7421-*-NYB

TeeJet® split eyelet nozzle body. *½”, ¾” and 1” sizes

8.36

Z

QJ39685-2-500-N Nozzle body, ½” tee , non drip

14.42

Z

QJ396851L500-N

Nozzle body, ½” left elbow, non-drip

14.42

Z

QJ396851R500-N

Nozzle body, ½” right elbow, non-drip

14.42

Z

PR18

Pack of 5 x QJ39685-1R500-N nozzle bodies

71.26

Z

PR19

Pack of 5 x QJ39685-1L500-N nozzle bodies

71.26

Z

PR21

Pack of 5 x QJ39685-2-500-N nozzle bodies

71.26

Z

QJ363-*-NYB

Triple wet boom nozzle body in *½”, *¾” and *1” sizes.

41.87

Z

QJ363-*-1-NYB

Triple dry boom nozzle body in *500 (½”), *750 (¾”) and *1000 (1”) sizes, single hosetail

41.87

Z

QJ363-*-2-NYB

Triple dry boom nozzle body in *500 (½”), *750 (¾”) and *1000 (1”) sizes, double hosetail

41.87

Z

24216-*-NYB

Compact triple wet boom nozzle body in *½”, *¾” and *1” sizes.

44.86

Z

B716.617.2

Brass high pressure roll-over body, non-drip, with caps

52.30

Z

A402745

Arag nozzle body for use on MB series and MF series booms. Has 10mm nib.

9.05

Z

A400101

Screw for nozzle body A402745

1.65

Z

Nozzle Filters

64

Order Code

Description

$ (EX. GST) PROD. CAT.

8079-PP-*

TeeJet® polypropylene strainer, *50, *80 or *100 mesh screen

PR51

2.31

Z

Pack of 10 x 8079-PP-50 strainers

22.75

Z

PR52

Pack of 10 x 8079-PP-100 strainers

22.75

Z

4193A-PP-5-*SS

TeeJet® polypropylene strainer with check valve for 5 psi, *50 or *100 mesh screen

8.10

Z

4193A-5-*SS

TeeJet® brass strainer with check valve for 5 psi, *50 or *100 mesh screen

10.26

Z

4067-SS-*

TeeJet® cup strainer, *50 or *100 mesh screen

3.06

Z

4514-NY-*

TeeJet® nylon slotted strainer, for suspended solids, *10, *20 and *32

2.48

Z

www.croplands.com.au

Photos are for illustrative purposes only. Prices and specifications are subject to change without notice. Prices effective January 2014. For indicative freight prices, see page 111.


Section 3

Nozzle Caps

Nozzle caps

Quick TeeJet Cap

CAP COLOUR OPTIONS

CP19438-EPR (EPDM Standard) CP19438-VI (Viton Optional Standard)

Quick TeeJet Seal

1

2

3

4

5

6

7

8

10

Black

White

Red

Blue

Green

Yellow

Brown

Orange

Lilac

ORDER CODE CAP

NOZZLES/SEALS TO SUIT CAPS

* Denotes colour code as shown above – not all colours may be available.

DESCRIPTION

• AirMix • TeeJet XR, DG, TT, AIXR (smaller capacities to size 08) • ALBUZ AXI, ADI, CVI, CVI TWIN, CVI 80

25612-*-NYR

Cap and seat gasket set

$ (EX. GST) PROD. CAT.

1.85 Z

PR20-*

Pack of 10 caps and seats

18.50

CP19438-EPR

Seal for nozzle caps, EPDM

0.97

PR60

Pack of 10 seals for nozzle caps

9.11

• Seal for use with nozzle caps

CP19438-VI

Seal for nozzle caps, viton

5.07

Z

• TeeJet XR, DG, TT and AIXR flat spray tips (for sizes 10 to 20)

25610-*-NYR

Cap and seat gasket set

2.05

Z

• TeeJet flat spray tips (smaller capacities) – see above. Tips can be positioned in choice 25596-*-NYR of 2 spray plane directions: parallel or perpendicular to wings of Quick TeeJet cap.

Cap and seat gasket set

2.05

Z

• TJ TwinJet / TJ60-Spray Tip / ALBUZ AVI, AVI TWIN, ESI, EXA, AIUB TeeJet / TTI Airinduction Turbo TeeJet SJ3 StreamJet

25598-*-NYR

Cap and seat gasket set

2.05

Z

• TF-VS Turbo FloodJet / TK-VS FloodJet

25600-*-NYR

Cap and seat gasket set

2.05

Z

• TK FloodJet / FL FullJet / TX ConeJet / TG Full Cone

25608-*-NYR

Cap and seat gasket set

2.05

Z

• Ceramic Disc-Core/TXB Conejet • ALBUZ TVI, ATR

26278-1-NYR

Cap and seat gasket set

2.64

Z

• For use with Hardi nozzle bodies »» TeeJet flat fan spray tips »» Turbo TeeJet spray tips »» AirMix nozzles

23306H-1-CELR

Cap and seat gasket for Hardi Retro-fit cap to suit Hardi Spray bodies. Available in black only

2.41

Z

• For use with Hardi nozzle bodies »» TJ TwinJet »» AI TeeJet, AIUB TeeJet spray tips flat »» TTI Air-induction Turbo TeeJet

21398H-1-CELR

Cap and seat gasket for Hardi Retro-fit cap to suit Hardi Spray bodies. Available in black only

2.41

Z

• Seal for use with nozzle caps

Z

Order Code

Description

CP1325

TeeJet brass 11/16” threaded cap

2.84

Z

CP8027-NYB

TeeJet® nylon 11/16” threaded cap

1.74

Z

CP8027-1-NYB

TeeJet® nylon 11/16” threaded cap, extra long

2.23

Z

CP3942

TeeJet® brass blanking plug

0.84

Z

19843-NYR

Blanking cap with seal, black only

4.47

Z

QJ90-2-NYR

Twin-Cap quick adaptor with seal

10.15

Z

QJ4676-¼-NYR

QJ Adaptor cap comes with gasket and ¼” female thread

8.01

Z

QJ4676-90-¼-N

QJ Adaptor cap, 90°, comes with gasket and ¼” female thread

9.41

Z

®

Photos are for illustrative purposes only. Prices and specifications are subject to change without notice. Prices effective January 2014. For indicative freight prices, see page 111.

$ (EX. GST) PROD. CAT.

Optima BUYERS’ GUIDE – JANUARY 2014

65


Section 3

Electronic Controllers and monitors

Electric control kits, monitors and GPS system Croplands have an excellent range of electric controls and monitors for all spraying and spreading operations. If you have a sprayer with manual controls and need to upgrade to electrics, or if your current set up is ageing and not up to the job, consider the electric kits for low pressure boomsprayers, or high pressure orchard sprayers (20 and 40 bar kits) as listed below. If you need a monitor simply for measuring area, or a fully auto rate control, take a look at what Croplands has to offer.

I-E2032W wireless control

I-S4021

Electric control kits – up to 20 bar pressure for linkage and boomsprayers ORDER CODE

DESCRIPTION

I-E2012A

Electric in-cab controller with switch box; one electric on/off valve shuts the complete boom off from the cab. Includes three manual taps so boom sections can be manually selected, along with a pressure regulating valve for setting manual spraying pressure, plus a gauge. Complete kit will fit up to your sprayer.

$ (EX. GST) PROD. CAT.

I-E2032A

I-E2032W

775.00

X

Electric in-cab controller with switch box; three-section electric valves to control three boom sections from the cab. Included is an electric pressure regulating valve also operated from the switchbox,, and a manual pressure regulating valve for setting spraying pressure, plus a gauge. Complete kit will fit up to your sprayer. All cables included

1,850.00

X

Wireless controller; no cables to the cab. Three-section electric valves to control three boom sections from the wireless control. Included is an electric pressure regulating valve also operated from the control panel, and a manual pressure regulating valve for setting spraying pressure, plus a gauge on the spray manifold. Complete kit will fit up to your sprayer.

2,495.00

X

Electric control kits – up to 40 bar pressure for orchard sprayers with cabs ORDER CODE

DESCRIPTION

I-S4020

2-section on/off electric controller with 12 volt brass solenoid valves (2 x B200.1915.1) for left and right shut-off and master dump valve with bypass to tank to avoid any pressure spike. Manual PRV, self-cleaning pressure filter, gauge and 2-section switchbox with master on/off; cables included in the kit

$ (EX. GST) PROD. CAT. 1,500.00

X

I-S4021

2-section on/off electric controller with 12 volt brass solenoid valves (2 x B200.1915.1) for left and right shut-off, master dump valve with bypass to tank to avoid any pressure spike and electric pressure regulating valve to adjust pressure from the switchbox. Manual PRV, self-cleaning pressure filter, gauge and switchbox with cables included in the kit

2,495.00

X

Raven Cruizer II™ GPS System

Cruizer II gives you greater accuracy and efficiency all season from tillage to seeding, spraying and harvesting. »» Ability to record field markers »» Optional weather-resistant model for rain/dust protection »» Built-in 10 Hz DGPS receiver and in open-cab situations external Helix antenna for accurate sub-meter guidance »» Interfaces with Raven’s new SmartYield™ monitoring system »» Record keeping and coverage maps for superior crop management made simple with file formats for saving, reporting and importing data »» Ability to save job files and A-B lines »» Integrated CANbus technology for adding Raven assisted steering and automatic boom section control on Raven SCS consoles only

66

ORDER CODE

DESCRIPTION

RV117-0171-249

Cruizer II guidance with Helix antenna kit and E-Diff correction

www.croplands.com.au

RV117-0171-249 $ (EX. GST) PROD. CAT. 4,550.00

W

Photos are for illustrative purposes only. Prices and specifications are subject to change without notice. Prices effective January 2014. For indicative freight prices, see page 111.


Section 3

Monitors and Controllers

Monitors and Controllers From a simple area meter and flow monitor to a fully auto rate spray controller, you will find some ideal solutions to help your farming or fruitgrowing become more efficient. $ (EX. GST)

PROD. CAT.

ORDER CODE

DESCRIPTION

MT01000

Calc-an-acre II area/speed/pump speed/ distance meter. Ideal for fitting to any implement or vehicle where a record of area covered, travel speed or distance measurement is required. Liquid crystal backlit display for day/night use. Can store up to 3 separate areas at once

A4670610SR100

The Visio is an innovative multi-function viewer for use with a variety of sensors utilising selectable software to detect inputs such as pressure, flow, and speed. The A4670610-SR100 kit includes the necessary cables, a 40 bar rated 5-100 litre/min flowmeter and the Visio console to act s as the spray rate monitor capable of displaying speed, flow and spray rate in L/Ha. Area and total liquid used, in litres, is stored in the memory. Fittings and some plumbing will be necessary to fit this to an existing sprayer, along with fitting the speed sensor

1,190.00

X

A4670610SR200

The Visio is an innovative multi-function viewer for use with a variety of sensors utilising selectable software to detect inputs such as pressure, flow, and speed. The A4670610-SR200 kit includes the necessary cables, a 40 bar rated 10-200 litre/min flowmeter and the Visio console to act s as the spray rate monitor capable of displaying speed, flow and spray rate in L/Ha. Area and total liquid used, in litres, is stored in the memory. Fittings and some plumbing will be necessary to fit this to an existing sprayer, along with fitting the speed sensor

1,190.00

X

A4670610HA

The A4670610-HA kit includes the necessary cables and a speed sensor plus the Visio console to act as a hectare meter capable of displaying speed and area. The speed sensor will require fitting to a vehicle or wheel.

825.00

X

MTSMATEARAG3

Spraymate 3-section auto rate controller complete with all wiring looms, hardware, a rapid-check flowmeter and 3 motorised boom-section valves for fitting to an existing boomsprayer as an upgrade for manual or basic electric controls. This kit comes with all the components for a complete upgrade. The controller console can display litres per hectare, speed, and flow. Suitable for applications up to 20 bar pressure

4,995.00

X

BRAVO180ARAG3

BRAVO 180 3-section auto rate controller complete with all wiring looms, hardware, a rapid-check flowmeter and 3 motorised boom-section valves for fitting to an existing boomsprayer as an upgrade for manual or basic electric controls. This kit comes with all the components for a complete upgrade. This new generation auto-rate controller has many new functions including a USB drive for data transfer, 10 storage options for configuration and can display multiple information on scren

5,995.00

X

G8212008

New for 2014 is an innovative system to monitor the level of liquid in a tank utilising the specific gravity of the liquid rather than having a level sensor. This way the tank can be on an angle or slope and the level can still be accurately measured. Ideal for spraying in undulating country so you know what you have left in the tank

950.00

X

795.00

Y

MT01000

A4670610

MTSMATE-ARAG3

Photos are for illustrative purposes only. Prices and specifications are subject to change without notice. Prices effective January 2014. For indicative freight prices, see page 111.

BRAVO180-ARAG3

Optima BUYERS’ GUIDE – JANUARY 2014

67


Section 3

Electric controls and valves

Electric controls and valves 9 8 8

POL41316399

POL413003AK.CR

4

3

7

6

5

A473CCRO01

4 3

2

1

A471CCRO01

A471CCRO02

A471CCRO03

A4628707

Electric Control Manifolds and Switchboxes ORDER CODE

DESCRIPTION

A471CCRO01

Control manifold for auto-rate controllers, for pumps up to 180 L/min, manual PRV, electric bypass (7 sec), dump valve, 80-mesh flushing filter, rapid-check Polmac flowmeter, mounting brackets (boom shut-off valves not included, see page 40)

$ (EX. GST) PROD. CAT. 1,995.00

Y

A473CCRO01

Control manifold for auto-rate controllers, for pumps up to 280 L/min, manual PRV, electric bypass (7 sec), dump valve, 80-mesh flushing filter, rapid-check Polmac flowmeter, mounting brackets (boom shut-off valves not included, see page 40)

1,995.00

Y

A471CCRO02

Control manifold for basic electric control systems. Max flow 180 L/min, 20 bar rated. Kit incudes manual PRV, Regulating valve, dump valve, pressure filter and 3 proportional electric boom shut-off valves

1,695.00

Y

A471CCRO03

Control manifold for basic electric control systems. Max flow 180 L/min, 20 bar rated. Kit incudes manual PRV, Regulating valve, dump valve, pressure filter and 5 proportional electric boom shut-off valves

2,395.00

Y

A4628707

Highly accurate programmable flowmeter with LCD display and sapphire bearing paddle turbine. 40–800 L/min reading of actual flow, or you can view litres pumped. 2 separately resettable counters. 2 x AA batteries required. Will require T7 male fittings.

1,199.00

Y

Control Manifold Components Valves, filters and flowmeters to repair/update your control manifold. Part Ref

68

ORDER CODE

DESCRIPTION

MAX PRESS

MAX FLOW

PORTS/BYPASS

1

A471502

Dump valve/PRV/inlet assembly

20 bar

180 L/min

32mm

495.00

Y

2

A463024S

Electric bypass valve, 7 second open/close

20 bar

150 L/min

25mm

334.30

Y

3

A32621135

80-mesh flushing filter with manifold flanges

20 bar

150 L/min

40mm

123.41

Z

4

POL00375908A

Polmac rapid-check flowmeter with flanges

20 bar

100 L/min

40mm

799.00

Y

5

A473001T

Dump valve, hi-flow, 0.6 sec

20 bar

120 L/min

32mm

356.40

Y

6

A473020S

Electric bypass valve, hi-flow, 7 second open/close

20 bar

150 L/min

25mm

359.00

Y

7

A465522

Manual PRV

20 bar

200 L/min

32mm

188.64

Y

8

POL413003AK.CR

Flow sensor square amp wave

260.24

Y

UP-402

Proximity sensor BA and HV4000

151.69

Y

9

POL41316399

Rapid check unit ZF 10–100LPM

295.00

Y

www.croplands.com.au

$ (EX. GST)

PROD. CAT.

Photos are for illustrative purposes only. Prices and specifications are subject to change without notice. Prices effective January 2014. For indicative freight prices, see page 111.


Section 3

Electric and manual valve kits and parts

Electric and manual valve kits A

D

A463011ST

A463001ST

A463CCRO06

B

Valve mounting kits

E

C F Valve adaptors

A463051

A463CCRO09

A463CCRO10

A463CCRO05

Valve Mounting Kits To make up your own bank of 2-wire or 3-wire motor valves (see below for valve options), order the correct kit for bolts, nuts and O-rings as shown. For end-caps and inlet/ outlet fittings, see the valve adaptors section below. ORDER CODE

DESCRIPTION

A463000.920

Kit for 2 valves, 150mm

$ (EX. GST) PROD. CAT. 28.03

Y

A463000.930

Kit for 3 valves, 207mm

35.94

Y

A463000.940

Kit for 4 valves, 264mm

41.03

Y

A463000.950

Kit for 5 valves, 321mm

47.77

Y

A463000.970

Kit for 7 valves, 436mm

61.19

Y

Valve AdaptOrs On the inlet and outlet of each motor valve there is a range of adaptors and fittings commonly used to go with the mounting kit (above). Use the valve adaptors diagram above to choose the adaptors/fittings you require. ORDER CODE

DESCRIPTION

$ (EX. GST) PROD. CAT.

A463000.130

Male adaptor (A) ¾” (BSP)

12.39

Y

A463000.140

Male adaptor (A) 1” (BSP)

14.85

Y

A463011.120

End cap (B)

4.09

Y

A463011.130

Pressure gauge adaptor (C) ¼” (BSP)

28.27

Y

A463000.030

Male adaptor (D) ¾” (BSP)

10.82

Y

A463000.040

Male adaptor (D) 1” (BSP)

12.79

Y

A463000.050

Male adaptor (D) 1 ¼” (BSP)

14.37

Y

A463011.110

End cap (E)

6.04

Y

A463001.113

Hosetail (F) 13mm

9.30

Y

A463001.116

Hosetail (F) 16mm

5.34

Y

A463001.119

Hosetail (F) 19mm

11.20

Y

A463001.125M Hosetail (F) 25mm

10.50

Y

6.29

Y

AG10071V

O-ring to suit flanges (Viton)

Electric and Manual Valves If you are updating your spraying control system, Croplands has a wide range of valves and valve kits to suit your application. ORDER CODE

DESCRIPTION

A463011ST

Single electric boom shut-off valve, 3-wire for use with auto-rate controllers or basic electric controls, with bypass (suitable for 2 and 3-wire applications)

379.00

Y

A463001ST

Single electric boom shut-off valve, 3-wire for use with auto-rate controllers or basic electric controls (suitable for 2 and 3-wire applications)

379.00

Y

A473001T

Electric boom shut-off valve, high flow (120 L/min), 3-wire for use with auto-rate controllers

399.00

Y

A463CCRO05

Electric valve bank, 3-section complete with flushing tap, gauge port and mounting brackets

943.18

Y

A463CCRO06

Electric valve bank, 5-section complete with flushing tap, gauge port and mounting brackets

1,510.33

Y

A463CCRO09

2-bank manual valves complete with mounting brackets, 20 bar

130.99

Y

A463CCRO10

3-bank manual valves complete with mounting brackets, 20 bar

185.63

Y

A463051

Manual shut-off valve, 13mm tail, 20 bar

55.98

Z

A463050

Blank ARAG valves

55.98

Z

Photos are for illustrative purposes only. Prices and specifications are subject to change without notice. Prices effective January 2014. For indicative freight prices, see page 111.

$ (EX. GST) PROD. CAT.

Optima BUYERS’ GUIDE – JANUARY 2014

69


Section 3

Suction Filters

Suction Filters ORDER CODE

Thread/ BAyonet SIZE

DESCRIPTION

INOX MESH

$ (EX. GST)

PROD. CAT.

319 SERIES Suction filters A319092

Suction filters series 319, 3” BSP threads, filtering capacity 400–800 L/min, cartridge Ø 145 x 320mm, polypropylene body, EPDM gaskets, brass fixing inserts

A319093 A3190935

3”

32

210.00

Z

3”

50

210.00

Z

3”

80

210.00

Z

319 Screen A335002.030

32

99.00

Z

A335003.030

50

99.00

Z

For 319 series

A3350035.030 A335004.030

80

99.00

Z

100

99.00

Z

317 SERIES Suction filters A317072 Suction filters series 317, 2” and 2½” BSP threads, filtering capacity 200–260 L/min, cartridge Ø 107 x 286mm, polypropylene body, EPDM gaskets, brass fixing inserts

A317073 A317083 A3171735

Suction filters series 317, 2” BSP threads, automatic shut-off valve to clean the filter, auxiliary suction inlet to fill the tank, valve release knob, filtering capacity 200–260 L/min, cartridge Ø 107 x 286mm, polypropylene body, EPDM gaskets, brass fixing inserts

A317472 A317473 A317474

2”

32

129.00

Z

2”

50

129.00

Z

2½”

50

129.00

Z

2”

80

129.00

Z

2”

32

129.00

Z

2”

50

129.00

Z

2”

100

129.00

Z

317 and 333 Screen A317002.030

32

69.00

Z

A317003.030

50

69.00

Z

For 317 and 333 series

A3170035.030 A317004.030

80

69.00

Z

100

69.00

Z

Common Parts A316000.050

Main housing O-ring

13.75

Y

A316300.060

Filter screen O-ring

10.17

Y

A3160F2 A3160F3 A3160F35

Suction filters series 316 fork coupling T7, fork coupling T7, filtering capacity 160–220 L/min, cartridge Ø 107 x 200mm, polypropylene body, EPDM gaskets, brass fixing inserts

T7 T7 T7

32 50 80

109.00 109.00 109.00

Z Z Z

A316162

1½”

32

109.00

Z

A316163

1½”

50

109.00

Z

1½”

80

109.00

Z

1½”

100

109.00

Z

2”

50

109.00

Z

316 SERIES Suction filters

Suction filters series 316, 1½” and 2” BSP threads, filtering capacity 160–220 L/min, cartridge Ø 107 x 200mm, polypropylene body, EPDM gaskets, brass fixing inserts

A3161635 A3161634 A316173 A3161735

2”

80

109.00

Z

A3165635

1½” 2” (short thread) 2”

80

129.00

Z

Suction filters series 316, automatic shut-off valve to clean the filter, auxiliary suction inlet to fill the tank, valve release knob, 1½” and 2” BSP threads, filtering capacity 160–220 L/min, cartridge Ø 107 x 200mm, polypropylene body, EPDM gaskets, brass fixing inserts

A316472 A316572 A316573 A3165735

32

129.00

Z

32

129.00

Z

2”

50

129.00

Z

2”

80

129.00

Z

316 Screen A316002.030

32

59.00

Z

A316003.030

50

59.00

Z

For 316 series

A3160035.030 A316004.030

80

59.00

Z

100

59.00

Z

Common Parts A316000.050

Main housing O-ring

13.75

Y

A316300.060

Filter screen O-ring

10.17

Y

ARAG Filter Screen Sizes (Note: sizes not available for all filter models)

70

Old Colour (Pre-2011)

New ISO Colour

Hole Size stainless steel (mm)

Micron Size (stainless steel mesh)

16 mesh

Black

Brown Red

1.32

1320

32 mesh

White

Red

0.59

594

50 mesh

Light Blue

Blue

0.36

365

80 mesh

Grey

Yellow

0.23

229

100 mesh

Red

Green

0.17

173

120 mesh

Green

Grey

0.15

144

150 mesh

Orange

Orange

0.11

114

200 mesh

Yellow

Pink

0.08

76

www.croplands.com.au

Photos are for illustrative purposes only. Prices and specifications are subject to change without notice. Prices effective January 2014. For indicative freight prices, see page 111.


Section 3

Suction Filters

Thread/ BAyonet SIZE

INOX MESH

1¼”

32

79.00

Z

1½”

50

79.00

Z

1½” 1½” (short thread) 1½” (short thread) 1½”

80

79.00

Z

50

119.00

Z

80

119.00

Z

32

119.00

Z

1½”

50

119.00

Z

A3145635

1½”

80

119.00

Z

A3145640

1½”

100

119.00

Z

ORDER CODE

DESCRIPTION

A314452

Suction filters series 314, 1¼” and 1 ½” BSP threads, filtering capacity 100–160 L/min, cartridge Ø 80x170mm, polypropylene body, EPDM gaskets, brass fixing inserts

$ (EX. GST)

PROD. CAT.

314 SERIES Suction filters A314063 A3141635 A314463 A3144635 A314562 A314563

Suction filters series 314, automatic shut-off valve to clean the filter, auxiliary suction inlet to fill the tank, valve release knob, filtering capacity 100–160 L/min, cartridge Ø 80x170mm, polypropylene body, EPDM gaskets, brass fixing inserts

314 Screen A314002.030

32

45.00

Z

A314003.030

50

45.00

Z

A3140035.030

For 314 series

A314004.030

80

45.00

Z

100

45.00

Z

Common Parts A314000.050

Main housing O-ring

8.18

Y

A314300.060

Filter screen O-ring

5.80

Y

A312052

Suction filters series 312, 1¼” BSP threads, filtering capacity 60–100 L/min, cartridge Ø 70x148mm, polypropylene body, EPDM gaskets, brass fixing inserts

32

39.00

Z

50

39.00

Z

312 SERIES Suction filters A312153

1¼” (short thread) 1¼”

312 Screen A312007.030

16

29.00

Z

A312002.030

32

29.00

Z

A312003.030

For 312 series

A312004.030

50

29.00

Z

100

29.00

Z

Common Parts A310000.050

Main housing O-ring

7.72

Y

A462200.040

Filter screen O-ring

5.49

Y

A3102158

Suction filters series 310, 1¼” BSP threads, filtering capacity 60 L/min, cartridge Ø 70x100mm, polypropylene body, EPDM gaskets, brass fixing inserts

310 SERIES Suction filters A310153

1 ¼”

32

35.00

Z

1 ¼”

50

35.00

Z

310 Screen A310008.030 A310003.030

For 310 series

32

25.00

Z

50

25.00

Z

Common Parts A310000.050

Main housing O-ring

7.72

Y

A462200.040

Filter screen O-ring

5.49

Y

A309953

Mini suction filter series 309, filtering capacity 20 L/min, cartridge Ø 27mm x 69mm. ½” female flynut inlet and 13mm hose-tail outlet Mini suction filter series 309, filtering capacity 20 L/min, cartridge Ø 27mm x 69mm. ½” bayonet inlet and 13mm hose-tail outlet

½”

50

22.23

Z

½”

50

22.23

Z

– –

50 80

19.00 19.00

Z Z

100

19.00

Z

309 SERIES Suction filters

A309B53

309 Screen A322003.030 A3220035.030

For 309 series

A322004.030

Pegasus sprayers at Croplands Adelaide production facility

Photos are for illustrative purposes only. Prices and specifications are subject to change without notice. Prices effective January 2014. For indicative freight prices, see page 111.

Optima BUYERS’ GUIDE – JANUARY 2014

71


Section 3

Suction Filters pressure filters

Suction Filters and Pressure Filters ORDER CODE

DESCRIPTION

A333072

2” screen filling filters SERIES 333, 2” BSP threads, filtering capacity 23m3/h, cartridge Ø 107 x 286mm, polypropylene body, EPDM gaskets, working pressure 8 bar max (116 psi max), draining thread ¾” BSP (open), double attachment for ¼” F BSP pressure gauge

Thread/ BAyonet SIZE

INOX MESH

2”

32

249.00

Z

2”

120/32

249.00

Z

$ (EX. GST)

PROD. CAT.

333 SERIES Suction filters

A333275

Common Parts A333000.050

Main housing O-ring

10.04

Y

A316305.060

Filter screen O-ring

10.17

Y

A335092

3” screen filling filters SERIES 335, 3” BSP threads, filtering capacity 46m3/h, cartridge Ø 145 x 320mm, polypropylene body, EPDM gaskets, working pressure 8 bar max (116 psi max), draining thread 1” BSP (open), double attachment for ¼” BSP F pressure gauge, stainless steel clamp

3”

32

379.00

Z

3”

100/32

379.00

Z

335 SERIES Suction filters

A3352294

335 Screen A3352204.030

100/32

119.00

Z

120/32

119.00

Z

62.35

Y

½”

32

35.00

Z

½”

50

35.00

Z

½”

100

35.00

Z

¾”

50

35.00

Z

A3242034

¾”

100

35.00

Z

A322002.030

32

19.00

Z

50

19.00

Z

80

19.00

Z

100

19.00

Z

A3352205.030

For 335 series

Common Parts A335000.040

Locking clamp

324-2 SERIES Suction filters A3242022 A3242023 A3242024 A3242033

Line filters series 324-2, male and female threads ½”, ¾” BSP, max. working pressure 14 bar, filtering capacity 80÷100 L/min, cartridge Ø 38x89mm, fixing points on both sides, polypropylene body, EPDM gaskets

324 ½” ¾” Screen A322003.030 A3220035.030

For ½” and ¾” 324 series

A322004.030

Common Parts A322000.040

Main housing O-ring

3.28

Y

A322000.050

Filter screen O-ring

2.06

Y

A3244043

Line filters series 324-2, male and female threads 1” BSP, max. working pressure 14 bar, filtering capacity 80÷100 L/min, cartridge Ø 38x89mm, fixing points on both sides, polypropylene body, EPDM gaskets

1”

50

49.00

Z

1”

80

49.00

Z

1”

100

49.00

Z

Complete Filter A32440435 A324044

324 1” Screen A323002.030

32

19.00

Z

A323003.030

50

19.00

Z

A3230035.030

For 1” 324 series

A323004.030

80

19.00

Z

100

19.00

Z

Common Parts AG11017

Main housing O-ring

3.22

Y

A322000.050

Filter screen O-ring

2.06

Y

328-2 SERIES Suction filters A3282053

1¼”

50

109.00

Z

A3282054

1¼”

100

109.00

Z

1½”

32

109.00

Z

1½”

50

109.00

Z

1½”

80

109.00

Z

1½”

100

109.00

Z

A3282062 A3282063 A32820635

Line filters series 328-2, 1¼” and 1½” BSP threads, max. working pressure 15 bar, filtering capacity 200÷280 L/min, cartridge Ø 58x210mm, fixing points on both sides, polypropylene body, EPDM gaskets

A3282064

328-2 Screen A326002.030

32

39.00

Z

A326003.030

50

39.00

Z

A3260035.030

For 328-2 series

A326004.030

80

39.00

Z

100

39.00

Z

Common Parts

72

AG10090

Main housing O-ring

8.96

Z

AG10052

Filter screen O-ring

2.44

Z

www.croplands.com.au

Photos are for illustrative purposes only. Prices and specifications are subject to change without notice. Prices effective January 2014. For indicative freight prices, see page 111.


Section 3

Suction Filters and pressure filters

70mm x Ø27

146mm x Ø35

SIZE

MESH

MAX. FLOW (L/min)

MAX. PRESS (Bar)

Filter 122mL poly

½”

50

45

10

40.71

Z

AAB122ML-12-P80

Filter 122mL poly

½”

80

45

10

40.71

Z

AAB122ML-12P100

Filter 122mL poly

½”

100

45

10

40.71

Z

ORDER CODE

DESCRIPTION

AAB122ML-12-P50

201mm x Ø57 1¼” and 1½” filters

PROD. CAT.

AAB122ML34PP50

Filter 122mL poly

¾”

50

60

10

40.71

Z

AAB122ML34PP80

Filter 122mL poly

¾”

80

60

10

40.71

Z

AAB122ML34PP100

Filter 122mL poly

¾”

100

60

10

40.71

Z

CP23174-1-304

Screen 16 mesh – grey

16

15.00

Z

CP23174-2-304

Screen 30 mesh – yellow

30

15.00

Z

CP45102-3-SSPP

Screen 50 mesh – red

50

16.53

Z

CP45102-4-SSPP

Screen 80 mesh – blue

80

16.53

Z

CP45102-5-SSPP

Screen 100 mesh – green

100

16.53

Z

CP23173-EPR

Main body O-ring

11.74

Z

AAB126ML-4-* (*specify mesh)

126 series filter with flushing cap, female thread

1”

*50, 80, 100

132

14

63.34

Z

CP16903-1-SSPP

Screen 16 mesh – grey

16

32.27

Z

CP16903-3-SSPP

Screen 30 mesh – yellow

30

32.27

Z

CP16903-4-SSPP

Screen 50 mesh – red

50

32.27

Z

CP16903-5-SSPP

Screen 80 mesh – blue

80

32.27

Z

CP16903-6-SSPP

Screen 100 mesh – green

100

32.27

Z

CP63150-EPR

Bottom cap gasket

6.62

Z

CP50494-EPR

Main body O-ring

5.09

Z

1¼”

*50, 80, 100

223

14

129.62

Y

1½”

*50, 80, 100

291

14

129.62

Z

16

45.49

Z

AAB126ML-5-* (*specify mesh) 200mm x Ø55

$ (EX. GST)

126 series filter with flushing cap, female thread

AAB126ML-6-* (*specify mesh)

126 series filter with flushing cap, female thread

CP15941-1-SSPP

Screen 16 mesh – grey

CP15941-2-SSPP

Screen 30 mesh – yellow

30

45.49

Z

CP15941-3-SSPP

Screen 50 mesh – red

50

45.49

Z

CP15941-4-SSPP

Screen 80 mesh – blue

80

45.49

Z

CP15941-5-SSPP

Screen 100 mesh – green

100

45.49

Z

CP15941-6-SSPP

Screen 120 mesh – brown

120

45.49

Z

CP63150-EPR

Bottom cap gasket

6.62

Z

CP48656-EPR

Main body O-ring

10.40

Z

B146.504.1070

Filter M146

70

50

50

130.06

Z

B146-203-16

Screen 40 mesh

40

46.46

Z

B146-203-19

Screen 70 mesh

70

53.97

Z

63mm x Ø40

TeeJet Filter Screen Sizes Standard TeeJet Colours

Hole Size stainless steel (mm)

Micron Size (stainless steel mesh)

16 mesh

Grey

1.1

1100

30 mesh

Yellow

0.53

530

50 mesh

Red

0.28

280

80 mesh

Blue

0.18

180

100 mesh

Green

0.15

150

120 mesh

Brown

Not stated

Not stated

200 mesh

Orange

0.08

80

(Note: sizes not available for all filter models)

Photos are for illustrative purposes only. Prices and specifications are subject to change without notice. Prices effective January 2014. For indicative freight prices, see page 111.

Optima BUYERS’ GUIDE – JANUARY 2014

73


Section 3

Manual ball Valves

Manual ball Valves

A453007E99

2 way ball valve

Banjo 2 way ball valve

A453027E99

3 way ball valve

Banjo 3 way ball valve

B176.1501.11

B165.1501.4

Two Way Ball Valves High quality Teflon ball valves with glass reinforced polypropylene housing, Teflon ball and seals, and EPDM gaskets. Female threaded couplings and 3 threaded mountings. Range ½”–3” sizes. Banjo 2 way ball valves feature precision molded in glass reinforced polypropylene for strength and chemical resistance, PTEF seats for smooth operation and proper sealing characteristics, EPDM O-rings to handle most fertilisers and chemicals and double O-rings in stem for extra sealing protection. $ (EX. GST)

PROD. CAT.

POLVTD31300

POLVTD90600

Three Way Ball Valves

ORDER CODE

DESCRIPTION

A454132

Valve ball poly ½” 2 way

35.00

Z

A454133

Valve ball poly ¾” 2 way

35.00

Z

A454134

Valve ball poly 1” 2 way

43.00

Z

A454135

Valve ball poly 1¼” 2 way

70.00

Z

A454136

Valve ball poly 1½” 2 way

70.00

Z

A454137

Valve ball poly 2” 2 way

80.00

Z

A453007E99

Manual ball valve, 80mm 2 way, 8 bar

222.85

Z

BJSUV100FP

Banjo ball valve 2 way 1” union

38.00

Y

BJSUV125FP

Banjo ball valve 2 way 1¼” union

65.28

Y

ORDER CODE

DESCRIPTION

BJSUV150FP

Banjo ball valve 2 way 1½” union

64.84

Y

A454232

Valve ball poly ½” 3 way

44.00

Z

BJSUV200FP

Banjo ball valve 2 way 2” union

82.30

Y

A454233

Valve ball poly ¾” 3 way

44.00

Z

A454234

Valve ball poly 1” 3 way

52.00

Z

A454234H

Valve ball poly 1” 3 way continuous flow

52.00

Z

A454235

Valve ball poly 1¼”

89.00

Z

A454235H

Valve ball poly 1¼” continuous flow

89.00

Z

A454236

Valve ball poly 1½” 3 way

95.00

Z

A454237

Valve ball poly 2” 3 way

119.00

Z

A453027E99

Manual ball valve, 80mm 3 way, 8 bar

385.00

Z

BJV100BL

Banjo 3 way 1” bottom load ball valve

87.64

Y

BJV125BL

Banjo 3 way 1¼” bottom load ball valve

113.32

Y

BJV150BL

Banjo 3 way 1½” bottom load ball valve

113.32

Y

BJV200BL

Banjo 3 way 2” bottom load ball valve

172.94

Y

High Pressure Ball Valves High pressure ball valves, 600 psi, nickel plated brass. $ (EX. GST)

PROD. CAT.

ORDER CODE

DESCRIPTION

B165.1501.4

Valve ball ³∕8” x ½” BSP right

30.02

Z

B165.1501.5

Valve ball ½” BSP right

30.02

Z

B165.1501.6

Valve ball ³∕8” x ½” BSP left

30.02

Z

B165.1501.7

Valve ball ½” BSP left

30.02

Z

B176.1501.11

Valve ball ¾”male x ¾” female BSP

40.18

Z

BALL12F2

Valve ball ½” female 2 way

22.44

Z

High quality Teflon ball valves with glass reinforced polypropylene housing, Teflon ball and seals, and EPDM gaskets. Female threaded couplings. Range ½”–3” sizes. Banjo 3 way ball valves feature stainless steel bolts precision molded in glass reinforced polypropylene for strength and chemical resistance, with self-aligning ball moving freely against the PTEF seats for smooth operation. Ball is diamond turned, after moulding, to provide precise contact between ball and seats. FKM (Viton type) seats. $ (EX. GST)

PROD. CAT.

Five Way Ball Valves High quality Teflon ball valves with glass reinforced polypropylene housing, Teflon ball and seals, and EPDM gaskets. Female threaded couplings. 1¼” and 2” sizes. ORDER CODE

74

DESCRIPTION

$ (EX. GST)

PROD. CAT.

POLVTD31300 Valve ball poly 1¼” 5 way

495.00

X

POLVTD90600 Valve ball poly 2” 5 way

710.00

X

www.croplands.com.au

Standard 3-way valves

Continuous flow 3-way valves

Photos are for illustrative purposes only. Prices and specifications are subject to change without notice. Prices effective January 2014. For indicative freight prices, see page 111.


Section 3

Agitators and tank fittings

Agitators, lids and tank fittings Breather Lid Lid O-ring/seal Strainer Ring A5022042

A5022033

A502163

A502053

A504203

A356060

A354010

Agitators SupaFlow Venturi Agitator

Hydraulic agitator with inspection hole. Can be adapted to various tank shapes. Double venturi circuit to increase efficiency and reduce water consumption. Threaded G ½” connector for simple installation on tank. Suitable for low pressure (nozzles Ø 5 – 7 – 9mm), or high pressure (nozzles Ø 2 – 3mm) operation. Polypropylene body.

Hydraulic Agitator

An efficient agitator can double the agitation of your tank mix. This hydraulic agitator hooks up to the pressure line. Elbow or straight version available.

Supa-Mix Agitator

This efficient, hydraulic agitator takes both high and low pressure return lines, and can turn over the contents of a 3000 litre tank every 3 minutes.

ORDER CODE

DESCRIPTION

A50220312

Agitator 90° #1.2 ceramic

$ (EX. GST) PROD. CAT. 32.59

Z

A5022033

Agitator 90° #3 stainless

29.57

Z

A5022042

Agitator straight #2 ceramic

27.28

Z

A502163

Agitator SupaFlow type – 3mm stainless steel

73.52

Z

A502053

Agitator Supa-Mix #2 nozzle

333.51

Z

tank fittings ORDER CODE

DESCRIPTION

A452107

Valve 2” anti-pollution drain valve

$ (EX. GST) PROD. CAT. 54.74

Z

ABP12

Tank outlet ½” poly

12.98

Z

ABP34

Tank outlet ¾” poly

14.20

Z

ABP10

Tank outlet 1” poly

14.51

Z

ABP114

Tank outlet 1¼” poly

14.51

Z

ABP112

Tank outlet 1½” poly

14.64

Z

ABP20

Tank outlet 2” poly

21.40

Z

Tank Lids and Strainers Quality threaded and hinged lids, ring and basket strainer replacements. Upgrade now! Lid Strainer Diameter diameter

Strainer depth

ORDER CODE

DESCRIPTION

A354030

Lid 102mm (across thread) comes with breather and seal

15.77

A354010

Lid 152mm (across thread) comes with spring breather and O-ring

19.73

Z

UP-180

Lid for diesel tank (fully assembled)

30.14

X

A3510221

Lid/ring kit, 255mm (across thread)

31.83

Z

A300110

Filter basket (small)

203

188

120

35.82

Z

A300116

Filter basket (small)

203

188

235

46.97

Z

A3510040

Lid/ring kit, 355mm (across thread)

44.80

Z

A300330

Filter basket (medium)

305

288

46

32.43

Z

A300120

Filter basket (medium)

305

288

245

54.92

Z

A3510060

Lid/ring kit, 455mm (across thread)

53.67

Z

A300126

Filter basket (large)

400

380

185

61.53

Z

A300130

Filter basket (large)

400

380

275

66.07

Z

A300134

Filter basket (large)

400

380

330

86.77

Z

A3522000

Breather for 355mm and 455mm lid

21.01

Z

A504203

Breather valve

14.85

Z

A356060

Hinged lid, 180°, 382mm across thread, comes with ring and breather

88.34

Z

A356660.020

O-ring for A356060 lid

43.86

Y

Photos are for illustrative purposes only. Prices and specifications are subject to change without notice. Prices effective January 2014. For indicative freight prices, see page 111.

$ (EX. GST) PROD. CAT.

Optima BUYERS’ GUIDE – JANUARY 2014

Z

75


Section 3

Spraying tools

Tools for Accurate Spraying Croplands have a great range of extremely useful tools for checking or upgrading the performance of your sprayer. We provide advice and equipment to test and maintain your sprayer – to ensure your application is optimised. In the nozzle section to follow, on pages 97 to 100, you will find a full summary of how to successfully calibrate a sprayer in broadacre, and some excellent information for determining your application options in horticulture. Below you will find tools to make calibration and maintenance of your nozzles much, much easier.

Electronic Spray Tip Pressure Tester

Spot-on calibrator

Quick Guide

Quick Guide

»» Can measure pressure in Psi, kPa and  Bar

An unbelievably useful and extremely fast way to check nozzle output. No more using inaccurate measuring jugs and stop watches – get a flow rate reading in 10 seconds or less!

»» Accurate to within +/- 1 psi, 0.07 bar or 7kPa »» 5 year battery life* (*depending on how much use)

»» Waterproof design, no moving parts

»» Quick cap connector – easy fit up to the nozzle body

»» Easy one-hand operation, electronic display

»» LCD display shows nozzle pressure and unit of measure

»» Reads in GPM or litres per minute

»» For test gauge use only – not for continuous use

Order code L-H9210

»» Accurate to 0.01 L/min »» Battery life approx 2 years (has battery warning indicator)

»» Reads from 3 to 160 psi (11 Bar) »» Absolutely foolproof Order code L-H9200 (more information on page 100)

Nozzle cleaner and nozzle cap multi tool in a handy pack

WindMate™ hand held weather meter

Quick Guide

Quick Guide

One of the most difficult and frustrating jobs is removing tight caps to clean nozzles, and then cleaning the nozzle without damaging it.

This is one of Croplands’ most successfully selling tools for determining when it is safe to go spraying. Thousands of farmers are now using the Windmate.

This kit has the following features:

»» Eight functions including Temperature, wet bulb temp, wind speed and direction, Dewpoint, relative humidity, Delta T and comfort index. For more information see page 96 in the nozzle section

»» Air-blast nozzle cleaner – simply charge it with air and it will blow out any grit or residue blocking your nozzle »» Multi tool with brush, plastic pick for removing a pre-orifice or residue, spanner wrench to make undoing nozzles so much easier and a utility hook for removing nozzle filters and the like. A must for all farmers Order code L-H9220

76

»» Clear design allows for easy cleaning. Warning: only test your nozzles with water, not with mixed chemicals. Damage to the unit may occur

»» You simply cannot do without a WindMate™ to be sure you are spraying when conditions are right Order code L-H6001

ORDER CODE

DESCRIPTION

L-H9210

Electronic pressure testing gauge

L-H9220

Nozzle cleaner and nozzle multi tool kit

L-H9200 L-H6001

$ (EX. GST) PROD. CAT. 271.60

X

97.00

X

Spot-on nozzle calibrator

306.25

X

WindMate™ hand held weathermeter

302.50

X

www.croplands.com.au

Photos are for illustrative purposes only. Prices and specifications are subject to change without notice. Prices effective January 2014. For indicative freight prices, see page 111.


NOZZLE Buyers’ GUIDE January 2014

www.croplands.com.au www.croplands.co.nz


Section 4

78

Spraywise nozzle information����������������������� 79

Selecting the right nozzle����������������������� 84

Low pressure air-induction���������������������� 91

High pressure air-induction���������������������� 91

Extremely coarse NozzLes�������������������������������� 91

Pre-orifice Flat Fan Nozzles������������������������ 92

Conventional nozzles����� 92

Angle spraying nozzles��� 93

Fertiliser nozzles��������������� 93

Spraywise books���������������� 96

Windmate���������������������������� 96

Horticulture nozzLes������ 105

www.croplands.com.au

Photos are for illustrative purposes only. Prices and specifications are subject to change without notice. Prices effective January 2014. For indicative freight prices, see page 111.


Nozzles Section 4

Croplands are the Application Experts

Trends in Nozzle Selection

Croplands designed this Spraywise part of the Optima catalogue as an easy to follow reference guide to help select the right nozzle for the job. As a subsidiary of Nufarm Ltd, Croplands shares the vision to supply our customers with the best products available. Being recognised as the application specialist in Australia, Croplands secured the exclusive distribution of ALBUZ and agrotop nozzles which we complement with the TeeJet range. The synergies we share with Nufarm, such as Spraywise, give us an unparalleled understanding of application technology. We can match target, chemical, nozzle and sprayer to recommend the most efficient and efficacious delivery system. Nufarm’s R&D trial program gives us the confidence that our products and recommendations work.

This stewardship program is a Nufarm initiative to deliver best practise spraying and drift management techniques. Over the last 8 years, Spraywise has been instrumental in raising awareness amongst the farming community about important spray application parameters. Spraywise consolidates various tools, research results and training courses into one program to assist farmers better manage their spraying activities. The result is increased operational flexibility without compromising efficacy.

Spraywise continues to educate farmers and contractors so that conditions such as temperature inversion can be identified and considered in their spray decisions.

Photos are for illustrative purposes only. Prices and specifications are subject to change without notice. Prices effective January 2014. For indicative freight prices, see page 111.

Coarse – Driven by growing concerns about drift problems, recent years have seen a constant shift away from conventional nozzles to anti drift nozzles. Extensive research programs, such as Spraywise, have demonstrated that the advantages of a FINE spray quality have been largely overrated. Coverage and efficacy can be achieved with coarser spray qualities. Even with coverage sensitive herbicides, increasing the water volume creates better efficacy than reducing the spray quality.

Air-induction – Key selection criteria for the applicator should be to select a nozzle that produces the coarsest spray quality without compromising efficacy. In most cases that will lead to an air-induction design. Those types of nozzles will also increase the operational flexibility because they reduce the spray application’s vulnerability to wind and Delta T.

Ceramic – Nozzles with high quality ceramic orifices are becoming more popular. Long durability makes this material a very cost effective option. The exclusive introduction of ALBUZ nozzles into the Optima range allows Croplands to offer ceramic options now in all nozzle classes, including low pressure air-induction.

Angle – A global trend in broadacre nozzle design is to create 110° flat fan nozzles that produce two fans in various degrees to each other (see page 89). The result is better coverage on the back of targets, very important for fungicide and insecticide applications.

Optima BUYERS’ GUIDE – JANUARY 2014

79


Section 4

Nozzles

Samples of droplets on Spray Quality water sensitive paper Classification

Nozzle type

Application

Extremely coarse – XC

agrotop XC TurboDrop

very coarse VC

TurboDrop®

Desirable quality for most applications

ALBUZ AVI

coarse C medium M fine F

CAU TIO N–

very fine VF

Some soil applied herbicides and some translocated herbicides (use if drift control is paramount over efficacy) Translocated herbicides (large targets) and soil applied herbicides (heavy stubble load)

AIRMIX

Translocated herbicides, soil applied herbicides and some contact herbicides (use with higher water rates)

ALBUZ adi

Contact herbicides, fungicides and insecticides

PRO OF DUCE TeeJet® XR SPR S L AY ARG DR E A IFT MO UN TS

Some fungicides, contact herbicides and insecticides

Droplet size classifications are based on BCPC specification and are in accordance with ASAE Standard S-572.

Spray Quality Systems of nozzle classification (BCPC, ASAE) have been developed around the world to unify and simplify the description of droplet size ranges that different nozzles produce. Accordingly, nozzles can be classified as producing an EXTREMELY COARSE, VERY COARSE, COARSE, MEDIUM, FINE and VERY FINE spray quality. VF

F

M

C

VC

XC

The spray quality a nozzle produces is very important. Generally, FINE spray quality will increase potential for coverage, but the small droplets are very prone to drift and environmental loss (evaporation). On the other hand, COARSE spray quality with larger droplets will greatly reduce drift potential but may compromise coverage, especially on small targets using low

COARSE

80

water volumes. Choosing the coarsest spray quality without compromising efficacy is the trick. Refer to the information provided by the manufacturer of the chemicals being used, e.g. chemical labels or data sheets, or consult the Nufarm Spraywise Boom Spray Application Guide – available from Nufarm or Croplands. The following information will assist you in finding a nozzle suitable for the job. An important point to remember when choosing a spray nozzle is that one nozzle can produce different spray qualities at different pressures. For example, an AirMix 02 will produce a COARSE spray quality at 3 bar, but a MEDIUM spray quality at 5 bar.

FINE

www.croplands.com.au

Photos are for illustrative purposes only. Prices and specifications are subject to change without notice. Prices effective January 2014. For indicative freight prices, see page 111.


Nozzles Section 4

3 2

2

1

1

3

2

1

3

3

2

1

2

1

2

1

2

1

2

1

2

1

3

3

3 2

OPTIMAL PRESSURE RANGE

10

1

3

3

3

2

1

1

2

3

3

2

1

2

1

3

3

2

3

7

9

2

6

8

1

10

10

OPTIMAL PRESSURE RANGE

5

4

9

See page 93 F

3

3

2

2

1

2

3

2

7

OPTIMAL PRESSURE RANGE

10

1

6

9

1

2

1

3

5

8

10

2

10

4

9

10

Photos are for illustrative purposes only. Prices and specifications are subject to change without notice. Prices effective January 2014. For indicative freight prices, see page 111.

OPTIMAL PRESSURE RANGE

See page 93

fertiliser

8

9

1

9

OPTIMAL PRESSURE RANGE

extremely coarse

8

OPTIMAL PRESSURE RANGE

10

high pressure

9

10

OPTIMAL PRESSURE RANGE

low pressure

8

9

OPTIMAL PRESSURE RANGE

3

pre-orifice

8

3

conventional

Spraying in Angles These nozzles produce a forward and backwards oriented flat fan. The backward oriented fan optimises 5 6 7 the coverage on the back side of target plants. Ideal 4 for fungicides and insecticides in erected crops such as cereal. Nozzles include conventional designs to high pressure air-induction nozzles. 8

Nozzles for EXTREMELY COARSE Spray Quality 6 5 6 7 7 4 In some instances avoiding drift4 is5 paramount. The amount of driftable fines must be greatly reduced or almost eliminated. Few nozzles are designed for this purpose. They will produce great efficacy with translocated products (e.g. 2,4-D or glyphosate) on large targets. In these situations these nozzles can be used with confidence. On smaller targets, especially 5 6 7 5 6 7 4 4 with low water volumes, efficacy is still questionable and current advice remains to use only if drift control is paramount over efficacy.

C

1

2

XC

M

3

3

2

1

3

2

1

1 2

OPTIMAL PRESSURE RANGE

10

1

See page 91

7

9

10

10

OPTIMAL PRESSURE RANGE

6

3

4

5

8

3

fertiliser

7

9

2

9

fertiliser

See page 91

7

8

6

8

9

1

8

10

6

10

5

9

9

4

8

IMAL SSURE NGE

7

10

8

10

10

9

9

OPTIMAL PRESSURE RANGE

extremely coarse

6

9

low pressure

OPTIMAL PRESSURE RANGE

essure

8

8

OPTIMAL PRESSURE RANGE

8

8

IMAL SURE NGE

4

5

High Pressure Air-Induction Nozzles High pressure air-induction nozzles work best in the range of 4–8 bar and must be operated above 3 bar. Compared to low-pressure air-induction nozzles they decrease the amount of driftable fines even further to 90–95%. At speeds of 25 km/h and above they provide more flexibility in retaining a constant spray quality at varying speeds. The orifice material is generally made out of steel or even more durable ceramic.

10

10 7

10

Low Pressure Air-Induction Nozzles 5 6 7 Low 4pressure air-induction nozzles are the most popular nozzle type in Australia. They achieve a 80–90% drift reduction while operating best between only 3–5 bar. Generally they produce a COARSE spray quality but with higher pressures a MEDIUM spray quality can also be achieved. That makes them excellent all rounder 5 6 7 5 6 7 4 nozzles. Until recently4 this type of nozzle was only produced in poly material. However, the ALBUZ CVI opens up the option to upgrade to durable pink ceramic in this class. pre-orifice

6

OPTIMAL PRESSURE RANGE

VC

9

9

ntional

OPTIMAL PRESSURE RANGE

7

OPTIMAL PRESSURE RANGE

8

8

IMAL SSURE NGE

9

10

10

9

9

OPTIMAL PRESSURE RANGE

4

low pressure

extremely coarse

6

5

10

8

See page 91

7

fertiliser

7

9

pre-orifice

high pressure

6

8

8

6

OPTIMAL PRESSURE RANGE

conventional

C coarse

8

OPTIMAL PRESSURE RANGE

10

10

OPTIMAL PRESSURE RANGE

fertiliser

9

9

10

OPTIMAL PRESSURE RANGE

extremely coarse

low pressure

IMAL SURE NGE

OPTIMAL PRESSURE RANGE

Pre-Orifice Flat Fan Nozzles 5 6 7 to conventional 5 6 7nozzles, pre-orifice nozzles Compared 4 4 move the spray quality generally from a FINE to a MEDIUM spectrum and reduce the amount of driftable fines by 50%. Instead of a single orifice they have an entry and an exit orifice. Cleaning of the internal 5 6 7 5 6 7 5 6 7 4 4 4 chamber can be a problem. Pressure requirements are 2–4 bar. While they are a better option than conventional nozzles, they still produce a lot of driftable fines, especially when used at higher pressures. 8

8

9

10

10

9

9

OPTIMAL PRESSURE RANGE

high pressure

8

8

8

1

fertiliser

OPTIMAL PRESSURE RANGE

4

10

extremely coarse

OPTIMAL PRESSURE RANGE

5

9

high pressure

7

See page 92

7

M

Conventional Nozzles 5 6 7 5 6 the 5 6cheapest 5 6 7 Conventional nozzles 4are simplest and 7 7 4 4 4 nozzle design with a single orifice only. They produce a FINE spray quality. The main advantage of conventional nozzles is their low pressure requirement (1.5–3 bar) and their proven performance with insecticides and fungicides. However, they are also the main producers of driftable fines and should be avoided.

6

6

5

8

OPTIMAL PRESSURE RANGE

F

ifice

4

10

2

7

9

2

low pressure

6

5

8

10

OPTIMAL PRESSURE RANGE

4

9

OPTIMAL PRESSURE RANGE

10

1

7

8

2

4

6

9

1

7

5

8

10

10

9

9

OPTIMAL PRESSURE RANGE

pre-orifice

See page 92 6

5

4

8

8 OPTIMAL PRESSURE RANGE

7

3

4

1

7

conventional

low pressure

6

5

3

pre-orifice

3

4

6

3

conventional

5

Fertiliser Nozzles Fertiliser nozzles produce solid streams and are used with liquid fertilisers.

Optima BUYERS’ GUIDE – JANUARY 2014

81


Section 4

Nozzles

Nozzle Names Names of nozzles start generally with the name of the manufacturer, for example agrotop. The first letters in a nozzle name refer to a specific type of nozzle. For example TDAM represents TurboDrop AirMix. The specific nozzle type code is followed by the spray angle that a nozzle produces. In most cases this would be 110 for a 110º angle but there are also, for example, 65, 80 or OC-codes (i.e. off-centre). The next code number represents the standard size of the nozzle. The size is determined by the spray volume that a nozzle puts out at 2.8 bar. For example, a XR TeeJet nozzle 02 size means that the nozzle puts out 0.2 gallons/min (= flow rate of 0.75 L/min). A 04 sized nozzle has a flow rate of 0.4 gallons/min. Different type nozzles of the same size may produce completely different spray qualities but they will have the same flow rate per minute.

Nozzle name: agrotop TDAM-110-03 agrotop = manufacturer TDAM = AirMix® 110 = 110° spray angle 03 = size (0.3 gallons/min at 2.8 bar)

Any letters behind the size-code indicate that different versions of the nozzle are available with different orifice materials. For example, VK stands for ceramic, VS for steel, VP for polymer.

Colour Coding Flat fan nozzles of the same size are colour coded to simplify recognition. For example, regardless of type, every yellow flat fan nozzle is a size 02. For assembled air-induction nozzles such as the TurboDrop the size is determined by the pre-orifice containing injector part, not the output-orifice containing nozzle cap.

Colour Coding of Flat Fan Nozzles

This colour coding also applies to angled, twin or offcentre flat fan nozzles as well as some liquid fertiliser nozzles. However, it does not apply to cone (except ALBUZ TVI and TeeJet TXB80) and FloodJet nozzles.

Croplands installs air-induction nozzles as standard

82

www.croplands.com.au

Photos are for illustrative purposes only. Prices and specifications are subject to change without notice. Prices effective January 2014. For indicative freight prices, see page 111.


Nozzles Section 4

Nozzle Material and Wear Nozzle orifices are produced with different materials, the most durable of them being ceramic, followed by steel and various polymers. Nozzles with brass orifices are made from the least durable material. Worn or damaged nozzles will produce an uneven spray pattern with serious implications for efficacy. Worn or damaged nozzles in spray units without an automatic rate controller will increase the output, spoil calibration, and may create unnecessary extra costs due to over application. Most new sprayers have rate controllers that will compensate by measuring liquid flow and adjust accordingly. However, they will cause undersupply to

the rest of the nozzles to adjust for the extra output of the worn nozzles. Again, this may result in an uneven spray pattern. Nozzles should be checked for wear at least once per season. As a rule of thumb, nozzles made from durable plastic will need replacement every two years, nozzles with steel orifices should be replaced every three years and nozzles with ceramic tips should be replaced every four to five years. These timeframes will decrease with heavy use, especially when spraying abrasive chemicals.

EFFECT OF NOZZLE MATERIAL ON NOZZLE WEAR: ACCELERATED WEAR TEST

% Change In Flow Rate

70

TP1100

60

4 Brass

50

XR1100

4VP (Polymer)

40

XR1100

30

4VS (Steel)

20

XR1100

10

4VK (Ceramic)

0 -10 0

20

40

60

80 100 120 140 160 180 200 Time (min)

Source: TeeJet

UNIFORMITY OF SPRAY Uniformity of spray is affected by: »» Worn or damaged nozzles

»» Nozzle type, spacing and height »» Boom movement, stability

»» Liquid properties (adjuvants can have an uniforming effect, e.g. LI 700)

NEW SPRAY TIPS Produce a uniform distribution when properly overlapped.

WORN SPRAY TIPS Have a higher output with more spray concentrated under each tip.

DAMAGED SPRAY TIPS Have a very erratic output – over applying and under applying. Source: TeeJet

Photos are for illustrative purposes only. Prices and specifications are subject to change without notice. Prices effective January 2014. For indicative freight prices, see page 111.

Optima BUYERS’ GUIDE – JANUARY 2014

83


Section 4

Nozzles

Bar Bar 2 Bar 2

Flowrate Flowrate 0.33 Flowrate 0.33

6 km/h 6 km/h 66 6 km/h 66

broadcast broadcast and and turf turf applications applications L/ha spacing Broadcast andnozzle turf applications L/ha 50cm 50cm nozzle spacing 8 km/h 10 km/h 12 km/h 14 km/h 1550cm km/h 16 km/h 17 km/h 18 km/h 20 km/h 22 km/h 24 km/h 25 km/h 26 km/h 28 km/h 30 km/h L/ha nozzle spacing 8 km/h 10 km/h 12 km/h 14 km/h 15 km/h 16 km/h 17 km/h 18 km/h 20 km/h 22 km/h 24 km/h 25 km/h 26 km/h 28 km/h 30 km/h 49 8 km/h 1039 km/h 1233 km/h 1428 km/h 1526 km/h 1625 km/h 1723 km/h 1822 km/h 2020 km/h 2218 km/h 2416 km/h 2516 km/h 2615 km/h 2814 km/h 3013 km/h 26 25 23 22 20 18 16 16 15 14 13

49 39 33 28 3 0.4 the 80 60 48 nozzle 40 34 How to select right 2 0.33 66 49 39 33 28 3 0.4 80 60 48 40 34

Example optimum fit: ALBUZ AVI 02 around 7 bar ALBUZ AVI 110

84

Bar 5

6

AVI 11001

C

C

AVI 110015

C

C

AVI 11002

C

C

AVI 110025

C

C

r nozzle sizes are not related to colour coding FOR spray qualities

NOTE: Colour coding for nozzle sizes NOTE: NOTE: NOTE: are Colour Colour not Colour related coding coding coding to for colour for for nozzle nozzle nozzle coding sizes sizes sizes are FOR are are not spray not not related related qualities related toto colour tocolour colour coding coding coding FOR FOR FOR spray spray spray qualities qualities qualities

32 30 28 27 24 22 20 19 18 17 16 26 25 23 22 20 18 16 16 15 14 13 32 30 28 27 24 22 20 19 18 17 16 4 0.46 92 69 55 46 40 37 35 32 31 28 25 23 22 21 20 18 3 0.4 80 60 48 40 34 32 30 28 27 24 22 20 19 18 17 16 4 0.46 92 69 55 46 40 37 35 32 31 28 25 23 22 21 20 18 5 0.52 104 78 62 52 44 41 39 36 35 31 28 26 25 24 22 21 0.46 92 69 55 46 40 37 35 32 31 28 25 23 22 21 20 18 0.52 104 78 62 52 44 41 39 36 35 31 28 26 25 24 22 21 01 1. Select Size Options 01 the66554Nozzle 0.57 114 85 68 57 49 45 43 40 38 34 31 28 27 26 25 23 0.52 104 78 62 52 44 41 39 36 35 31 28 26 25 24 22 21 0.57 114 85 68 57 49 45 43 40 38 34 31 28 27 26 25 23 Orange 01 7 0.61 122 92 73 61 52 49 46 43 41 37 33 31 29 28 26 24 Orange Example: wants to spray rate 80 L/ha. 6 A farmer 0.57 114 85 68 at a 57 drive 49speed 45 of 18 43 km/h, 40 with 38 a spray 34 31 of31 28 27 26 25 23 7 0.61 122 92 73 61 52 49 46 43 41 37 33 29 28 26 24 0.65 130 98 78 65 56 52 49 46 43 39 35 33 31 30 28 26 Orange 887 0.61 122 92 73 61 52 49 46 43 41 37 33 31 29 28 26 24 0.65 130 98 78 65 56 52 49 46 43 39 35 33 31 30 28 26 9 Find0.69 138km/h 104column 83 on 69page 5986 and 55 follow 52 42 80 38 33 closest 32 30 28 What to do:  the 18 it49 down46 L/ha –35 8 0.65 130 98 78 65 56 52 49 46 43to find 39 35 33or the 31 30 28 26 9 0.69 138 104 83 69 59 55 52 49 46 42 38 35 33 32 30 28 10 0.73 146 110 88 73 63 59 55 52 49 44 40 37 35 34 32 29 9 value(s) 0.69 to146 138 104 Now 83 69 59 along 55 the 52row 52 49 46the appropriate 42 38 35 33 32of nozzle 30 28 10 0.73 110 88 73 63 59 55 49 44 40 37 35 34 32 29 80 L/ha. follow left to find combination 2 0.49 98 74 59 49 42 39 37 35 33 30 27 25 24 23 21 20 10 0.73 146 110 88 73 63 59 55 52 49 44 40 37 35 34 32 29 2 0.49 98 74 59 49 42 39 37 35 33 30 27 25 24 23 21 20 3 and pressure. 0.6 120 90 72 60 51 48 45 42 40 36 33 30 29 28 26 24 2 0.49 98 74 59 49 42 39 37 35 33 30 27 25 24 23 21 20 3 0.6 120 90 72 60 51 48 45 42 40 36 33 30 29 28 26 24 4 0.69 138 104 83 69 59 55 52 49 46 42 38 35 33 32 30 28 3 0.6 120 90 72 60 51 48bar. 52 45 42blue46 40 36 33 30 29 28 26 24 4 0.69 138 104 83 69 59 55 49 42 38 35 33 32 30 28 Result: Yellow at 7 116 bar. Or at 4.562 Or 0355 at 3 bar. 5 02 0.78 156 93 02578Lilac 66 58 52 47 42 39 37 36 33 31 4 0.69 138 104 83 69 59 55 52 49 46 42 38 35 33 32 30 28 5 0.78 156 116 93 78 66 62 58 55 52 47 42 39 37 36 33 31 015 015 6 0.85 170 127 102 85 73 68 64 60 57 51 46 42 41 39 37 34 5 0.78 156 116 93 78 66 62 58 55 52 47 42 39 37 36 33 31 6 0.85 170 127 102 85 73 68 64 60 57 51 46 42 41 39 37 34 Green 015 7 0.92 184 138 110 92 79 73 and 69 turf 65 applications 61 55 50 46 44 42 40 37 broadcast Green 6 0.85 170 127 102 85 73 68 64 60 57 51 46 42 41 39 37 34 7 0.92 184 138 110 92 79 73 69 65 61 55 50 46 44 42 40 37 8 0.98 196 147 118 98 84 79 74 69 65 59 54 49 47 45 42 39 Green L/ha 50cm nozzle spacing 7 0.92 184 138 110 92 79 73 69 65 61 55 50 46 44 42 40 37 8 0.98 196 147 118 98 84 79 74 69 65 59 54 49 47 45 42 39 9 1.04 208 156 125 104 89 83 78 74 69 63 57 52 50 48 45 42 8 0.98 196 147 118 98 84 79 74 69 65 59 54 49 47 45 42 39 9 1.04 Bar Flowrate 6208 km/h 8156 km/h 10125 km/h 12104 km/h 1489 km/h 1583 km/h 1678 km/h 1774 km/h 18 69 km/h 2063 km/h 2257 km/h 2452 km/h 2550 km/h 2648 km/h 2845 km/h 3042 km/h 10 1.1 220 164 131 110 94 87 82 77 73 66 60 55 52 50 47 44 9 1.04 208 156 125 104 89 83 78 74 69 63 57 52 50 48 45 42 10 1.1 220 164 131 110 94 87 82 77 73 66 60 55 52 50 47 44 2 0.33 66 49 39 33 28 26 25 23 22 20 18 16 16 15 14 13 2 0.65 130 98 78 65 56 52 49 46 43 39 35 33 31 30 28 26 10 1.1 220 164 131 110 94 87 82 77 73 66 60 55 52 50 47 44 2 0.65 130 98 78 65 56 52 49 46 43 39 35 33 31 30 28 26 3 0.4 80 60 48 40 34 32 30 28 27 24 22 20 19 18 17 16 3 0.8 160 120 96 80 69 64 60 56 53 48 44 40 38 37 35 32 2 0.65 130 98 78 65 56 52 49 46 43 39 35 33 31 30 28 26 3 0.8 160 120 96 80 69 64 60 56 53 48 44 40 38 37 35 32 4 0.46 92 69 55 46 40 37 35 32 31 28 25 23 22 21 20 18 4 0.92 184 139 111 92 79 74 70 65 61 56 50 46 44 43 40 37 3 0.8 160 120 96 80 69 64 60 56 53 48 44 40 38 37 35 32 4 0.92 184 139 111 92 79 74 70 65 61 56 50 46 44 43 40 37 5 0.52 104 78 62 52 44 41 39 36 35 31 28 26 25 24 22 21 5 1.03 206 155 124 103 89 83 78 73 69 62 56 52 50 48 45 41 01 4 0.92 184 139 111 92 79 74 70 65 61 56 50 46 44 43 40 37 5 1.03 206 155 124 103 89 83 78 73 69 62 56 52 50 48 45 41 6 0.57 114 85 68 57 49 45 43 40 38 34 31 28 27 26 25 23 02 02 6 1.13 226 170 136 113 97 91 85 80 75 68 62 57 54 52 49 45 Orange 5 1.03 206 155 124 103 89 83 78 73 69 62 56 52 50 48 45 41 6 1.13 226 170 136 113 97 91 85 80 75 68 62 57 54 52 49 45 7 0.61 122 92 73 61 52 49 46 43 41 37 33 31 29 28 26 24 Yellow 02 7 1.22 244 183 147 122 105 98 92 86 81 74 67 61 59 57 53 49 Yellow 6 1.13 226 170 136 113 97 91 85 80 75 68 62 57 54 52 49 45 7 1.22 244 183 147 122 105 98 92 86 81 74 67 61 59 57 53 49 8 0.65 130 98 78 65 56 52 49 46 43 39 35 33 31 30 28 26 8 1.31 262 196 157 131 112 105 98 92 87 79 71 65 63 60 56 52 Yellow 7 1.22 244 183 147 122 105 98 92 86 81 74 67 61 59 57 53 49 8 1.31 262 196 157 131 112 105 98 92 87 79 71 65 63 60 56 52 9 0.69 138 104 83 69 59 55 52 49 46 42 38 35 33 32 30 28 9 1.39 278 208 166 139 119 111 104 98 93 83 75 69 66 64 60 55 8 1.31 262 196 157 131 112 105 98 92 87 79 71 65 63 60 56 52 9 1.39 278 208 166 139 119 111 104 98 93 83 75 69 66 64 60 55 10 0.73 146 110 88 73 63 59 55 52 49 44 40 37 35 34 32 29 10 1.46 292 219 175 146 125 117 110 103 97 88 80 73 70 67 63 58 9 1.39 278 208 166 139 119 111 104 98 93 83 75 69 66 64 60 55 10 1.46 292 219 175 146 125 117 110 103 97 88 80 73 70 67 63 58 2 0.49 98 74 59 49 42 39 37 35 33 30 27 25 24 23 21 20 2 0.82 164 122 98 82 70 65 61 58 55 49 45 41 39 38 35 33 10 1.46 292 219 175 146 125 117 110 103 97 88 80 73 70 67 63 58 2 0.82 164 122 98 82 70 65 61 58 55 49 45 41 39 38 35 33 3 0.6 120 90 72 60 51 48 45 42 40 36 33 30 29 28 26 24 3 1.0 200 150 120 100 86 80 75 71 67 60 55 50 48 46 43 40 2 0.82 164 122 98 82 70 65 61 58 55 49 45 41 39 38 35 33 3 1.0 200 150 120 100 86 80 75 71 67 60 55 50 48 46 43 40 4 0.69 138 104 83 69 59 55 52 49 46 42 38 35 33 32 30 28 4 1.15 230 173 138 115 99 92 87 81 77 69 63 58 55 53 50 46 3 1.0 200 150 120 100 86 80 75 71 67 60 55 50 48 46 43 40 4 1.15 230 173 138 115 99 92 87 81 77 69 63 58 55 53 50 46 5 0.78 156 116 93 78 66 62 58 55 52 47 42 39 37 36 33 31 5 1.29 258 194 155 129 111 103 97 91 86 78 70 65 62 60 56 52 015 4 1.15 230 173 138 115 99 92 87 81 77 69 63 58 55 53 50 46 5 1.29 258 194 155 129 111 103 97 91 86 78 70 65 62 60 56 52 6 0.85 170 127 102 85 73 68 64 60 57 51 46 42 41 39 37 34 025 025 6 1.41 282 212 170 141 121 113 106 100 94 85 77 71 68 65 61 57 Green 5 1.29 258 194 155 129 111 103 97 91 86 78 70 65 62 60 56 52 6 1.41 282 212 170 141 121 113 106 100 94 85 77 71 68 65 61 57 7 0.92 184 138 110 92 79 73 69 65 61 55 50 46 44 42 40 37 Lilac 025 7 1.53 306 229 183 153 131 122 115 108 102 92 83 76 73 70 66 61 Lilac 6 1.41 282 212 170 141 121 113 106 100 94 85 77 71 68 65 61 57 7 1.53 306 229 183 153 131 122 115 108 102 92 83 76 73 70 66 61 8 0.98 196 147 118 98 84 79 74 69 65 59 54 49 47 45 42 39 8 1.63 326 245 196 163 140 131 123 115 109 98 89 82 78 75 70 65 Lilac 7 1.53 306 229 183 153 131 122 115 108 102 92 83 76 73 70 66 61 8 1.63 326 245 196 163 140 131 123 115 109 98 89 82 78 75 70 65 9 1.04 208 156 125 104 89 83 78 74 69 63 57 52 50 48 45 42 9 1.73 346 260 208 173 148 139 130 122 115 104 95 87 83 80 74 69 8 1.63 326 245 196 163 140 131 123 115 109 98 89 82 78 75 70 65 9 1.73 346 260 208 173 148 139 130 122 115 104 95 87 83 80 74 69 10 1.1 220 164 131 110 94 87 82 77 73 66 60 55 52 50 47 44 10 1.83 366 274 219 183 157 146 137 129 122 110 100 91 88 84 79 73 9 1.73 346 260 208 173 148 139 130 122 115 104 95 87 83 80 74 69 10 1.83 366 274 219 183 157 146 137 129 122 110 100 91 88 84 79 73 2 0.65 130 98 78 65 56 52 49 46 43 39 35 33 31 30 28 26 2 0.98 196 147 118 98 84 79 74 69 65 59 54 49 47 45 42 39 10 1.83 366 274 219 183 157 146 137 129 122 110 100 91 88 84 79 73 2 0.98 196 147 118 98 84 79 74 69 65 59 54 49 47 45 42 39 3 0.8 160 120 96 80 69 64 60 56 53 48 44 40 38 37 35 32 3 1.2 240 180 144 120 103 96 90 85 80 72 65 60 58 55 52 48 2 0.98 196 147 118 98 84 79 74 69 65 59 54 49 47 45 42 39 3 1.2 240 180 144 120 103 96 90 85 80 72 65 60 58 55 52 48 4 0.92 184 139 111 92 79 74 70 65 61 56 50 46 44 43 40 37 4 1.39 278 208 166 139 119 111 104 98 93 83 75 69 66 64 60 55 03 3 1.2 240 180 144 120 103 96 90 85 80 72 65 60 58 55 52 48 4 1.39 278 208 166 139 119 111 104 98 93 83 75 69 66 64 60 55 5 1.03 206 155 124 103 89 83 78 73 69 62 56 52 50 48 45 41 5 1.55 310 232 186 155 133 124 116 109 103 93 85 77 74 72 67 62 02 4 1.39 278 208 166 139 119 111 104 98 93 83 75 69 66 64 60 55 5 1.55 310 232 186 155 133 124 116 109 103 93 85 77 74 72 67 62 Blue 6 1.13 226 170 136 113 97 91 85 80 75 68 62 57 54 52 49 45 03 6 1.7 340 255 204 170 145 136 128 120 113 102 93 85 82 78 73 68 Yellow 5 1.55 310 232 186 155 133 124 116 109 103 93 85 77 74 72 67 62 6 1.7 340 255 204 170 145 136 128 120 113 102 93 85 82 78 73 68 7 1.22 244 183 147 122 105 98 92 86 81 74 67 61 59 57 53 49 03 7 1.83 366 275 220 183 157 147 138 129 122 110 100 92 88 85 79 73 Blue 6 1.7 340 255 204 170 145 136 128 120 113 102 93 85 82 78 73 68 7 1.83 366 275 220 183 157 147 138 129 122 110 100 92 88 85 79 73 8 1.31 262 196 157 131 112 105 98 92 87 79 71 65 63 60 56 52 8 1.96 392 294 235 196 168 157 147 138 131 118 107 98 94 90 84 78 Blue 7 1.83 366 275 220 183 157 147 138 129 122 110 100 92 88 85 79 73 8 1.96 392 294 235 196 168 157 147 138 131 118 107 98 94 90 84 78 9 1.39 278 208 166 139 119 111 104 98 93 83 75 69 66 64 60 55 9 2.08 416 312 249 208 178 166 156 146 139 125 113 104 100 96 89 83 8 1.96 392 294 235 196 168 157 147 138 131 118 107 98 94 90 84 78 9 2.08 416 312 249 208 178 166 156 146 139 125 113 104 100 96 89 83 10 1.46 292 219 175 146 125 117 110 103 97 88 80 73 70 67 63 58 10 2.19 438 329 263 219 188 175 165 155 146 132 120 110 105 101 94 88 2. Select Spray Quality 9 2.08 416 312 249 208 178 166 156 146 139 125 113 104 100 96 89 83 10 2.19 438 329 263 219 188 175 165 155 146 132 120 110 105 101 94 88 2 0.82 164 122 98 82 70 65 61 58 55 49 45 41 39 38 35 33 2 1.31 262 196 157 131 112 105 98 92 87 79 71 65 63 60 56 52 10 2.19 438 329 263 219 188 175 165 155 146 132 120 110 105 101 94 88 2 1.31 262 196 157 131 112 105 98 92 87 79 71 65 63 60 56 52 3 1.0 200 150 120 100 86 80 75 71 67 60 55 50 48 46 43 40 3 1.6 320 240 192 160 137 128 120 113 107 96 87 80 77 74 69 64 2 1.31 262 196 157 131 112 105 98 92 87coding 79 for 71 spray 65 qualities 63 60are not 56 52 Note: Colour 3 1.6 320 240 192 160 137 128 120 113 107 96 87 80 77 74 69 64 4 1.15 230 173 138 115 99 92 87 81 77 69 63 58 55 53 50 46 1.85 370 277 222 VC 185 158 148 139 131 123 111 101 92 89 85 79 74 VF F 5443 M 258 C XC 103 coding 1.6 320 240 192 160 137 128 related 120 113 107 96 87 for 80nozzle 77 sizes. 74 69 64 1.85 370 277 222 185 158 148 139 131 123 111 101 92 89 85 79 74 1.29 194 155 129 111 97 91to colour 86 78 70 65 62 60 56 52 5 2.07 414 310 248 207 177 165 155 146 138 124 113 103 99 95 89 83 025 4 1.85 370 277 222 185 158 148 139 131 123 111 101 92 89 85 79 74 5 2.07 414 310 248 207 177 165 155 146 138 124 113 103 99 95 89 83 6 1.41 282 212 170 141 121 113 106 100 94 85 77 71 68 65 61 57 04 04 6 2.26 452 339 272 226 194 181 170 160 151 136 124 113 109 105 97 91 Lilac 5 2.07 414 310 248 207 177 165 155 146 138 124 113 103 99 95 89 83 6 2.26 452 339 272 226 194 181 170 160 151 136 124 113 109 105 97 91 7 1.53 306 229 183 153 131 122 115 108 102 92 83 76 73 70 66 61 Red 04 7 2.44 488 367 293 244 209 195 184 172 163 147 133 122 117 113 105 98 Example: The farmer wants to use Weedmaster DST. Red 6 2.26 452 339 272 226 194 181 170 160 151 136 124 113 109 105 97 91 7 2.44 488 367 293 244 209 195 184 172 163 147 133 122 117 113 105 98 8 1.63 326 245 196 163 140 131 123 115 109 98 89 82 78 75 70 65 8 2.61 522 392 313 261 224 209 196 184 174 157 142 131 125 120 112 104 7 2.44 488 367 293 244 209 195 184 172 163 147 133 122 117 113 105 98 8 2.61 522 392 313 261 224 209 196 184 174 157 142 131 125 120 112 104 9 1.73 346 260 208 173 148 139 130 122 115 104 95 87 83 80 74 69 What Red to do :  is222 given208 on the advisory e.g. 119 Nufarm 9 Information 2.77 554on required 416 333 spray 277 quality 238 196 label 185or other 167 151 139 literature, 133 128 111 8 2.61 522 392 313 261 224 209 196 184 174 157 142 131 125 120 112 104 9 2.77 554 416 333 277 238 222 208 196 185 167 151 139 133 128 119 111 10 1.83 366 274 219 183 157 146 137 129 122 110 100 91 88 84 79 73 10Boomspray 2.92 584Application 438 351 Guide, 292 or 250 234follow 219 the 206 195 176 160page. 146 140 135 125 117 on opposite 9 2.77 554 416 333 277 238 222 208 196 185 167 151 139 133 128 119 111 10 2.92 584 438 351 292 250 234 219 206 195 176 160 146 140 135 125 117 2 0.98 196 147 118 98 84simply 79 74 69chart 65 59 54 49 47 45 42 39 10 438 351 292 250 219 206 176 160 146 140 135 125 117 3 1.2 240 180 144 120 103 96 90 85 80 broadcast 72 65 and 60 turf 58 applications 55 52 48 Result: The2.92 table 584 opposite page advises to use234 a COARSE spray195 quality. L/ha 50cm nozzle spacing 4 1.39 278 208 166 139 119 111 104 98 93 83 75 69 66 64 60 55 Bar Flowrate 6 km/h 8 km/h 10 km/h 12 km/h 14 km/h 15 km/h 16 km/h 17 km/h 18 km/h 20 km/h 22 km/h 24 km/h 25 km/h 26 km/h 5 1.55 310 232 186 155 133 2 1240.33 11666 109 103 3393 28 85 26 7725 74 72 20 67 18 6216 49 39 23 22 16 15 03 6 1.7 340 255 204 170 145 3 136 0.4 12880 120 113 8530 82 60 48 40102 34 93 32 28 2778 24 73 22 6820 19 18 Blue Nozzle 69 55 46110 40 10037 32 3185 28 79 25 7323 22 21 7 1.83 122 9235 88 3. Select Type366 275 220 183 157 4 1470.46 13892 129 104 138 78 62 36 3590 31 84 28 7826 25 24 8 1.96 294 235 196 01 168 5 1570.52 147 131 52118 44 10741 9839 94 What to do:  Match the392 chosen nozzle size and pressure (step with 68 the chosen spray quality by89 31 8328 27 26 114 1) 85 43 40 (step 38 2) 34 9 2.08 416 312 249 208 178 6 1660.57 156 146 139 57125 49 11345 104 100 96 Orange 7 0.61 122 92 73 61 52 49 46 43 41 37 33 31 29 28 the different page 89 and page 10comparing 2.19 438 329 263 nozzle 219 types 188 8on 175 146 90. 105 101 39 94 35 8833 0.65 165 130 155 98 78 65132 56 12052 110 49 46 43 31 30 2 1.31 262 196 157 131 112 9 1050.69 98138 92 87 6552 63 104 83 6979 59 71 55 49 4660 42 56 38 5235 33 32 Result: Optimum fit: ALBUZ AVI 02 around 7 bar, agrotop TurboDrop 02 around 7 bar, 146 113 110 88 52 4974 44 69 40 6437 35 34 3 1.6 320 240 192 160 137 10 1280.73 120 107 7396 63 87 59 8055 77 74 59 35 3385 30 79 27 7425 24 23 4 1.85 370 277 222CVI185 158 2 148 13998 131 123 49111 42 10139 9237 89 ALBUZ 03 around 3 0.49 bar. 3 0.6 120 90 72 60 51 48 45 42 40 36 33 30 29 28 5 2.07 414 310 248 207 177 4 1650.69 155 146 138 124 113 103 99 95 89 83 138 104 83 69 59 55 52 49 46 42 38 35 33 32 04 Possible agrotop 03 bar, agrotop AirMix 025 at124 4.5 bar, ALBUZ CVI 6 2.26 fit:  452 339 272 AirMix 226 194 at 3 181 151 78 136 66 109 105 025 0.78 170 156 160 116 93 62 113 58 55 52 47 97 42 9139 37 36 015209 65 1950.85 Red 7 2.44 488 367 293 244 184 172 163 147 133 122 117 113 105 98 170 127 102 85 73 68 64 60 57 51 46 42 41 39 at 4.5 bar (these selections do not allow much of a pressure change without Green 184 184 138 110 69 65 61 44 42 8 2.61 522 392 313 261 224 7 2090.92 196 174 92157 79 14273 131 125 120 55112 50 10446 changing the spray 8 196 147 118 74 69 65 47 45 9 2.77 554 416 333 277 238 quality). 2220.98 208 196 185 98167 84 15179 139 133 128 59119 54 11149 9 1.04 208 156 125 104 89 83 78 74 69 63 57 52 50 48 10 2.92 584 438 351 292 250 10 234 1.1 219 195 110 176 94 16087 146 140 135 66125 60 11755 220 206 164 131 82 77 73 52 50 2 3 4 5 02 6 Yellow 7 7 8 8 C C 9 from Step 1. 10 C C 2 C C 3 C C 4 5 025 6 Lilac 7 8 9 www.croplands.com.au 10 2 3

0.65 0.8 0.92 1.03 1.13 1.22 1.31 1.39 1.46 0.82 1.0 1.15 1.29 1.41 1.53 1.63 1.73 1.83 0.98 1.2

130 160 184 206 226 244 262 278 292 164 200 230 258 282 306 326 346 366 196 240

Example possible fit: ALBUZ CVI 025 at 4.5 bar

98 78 65 56 52 49 46 43 39 35 33 120 96 80 69 64 60 56 53 48 44 40 139 111 92 79 74 70 65 61 56 50 46 155 124 103 89 83 78 73 69 62 56 52 170 136 113 97 91 85 80 Bar 75 68 62 57 183 147 122 105 982.5 92 3 86 3.5 81 4 74 4.567 2 5 61 196CVI 110015 157 131 112 105C 98 C 92 C 87 C 79 71 65 C C C 208 166 139 119 111 104 98 93 83 75 69 C M 219CVI 11002 175 146 125C 117C 110 C 103 C 97 C 88 80 73 C 45 M41 122CVI 110025 98 82 70C 65 C 61 C 58 C 55 C 49 150CVI 11003 120 100 86C 80 C 75 C 71 C 67 C 60 C 55 M50 173 138 115 99 92 87 81 77 69 63 58 194 155 129 111 103 97 91 86 78 70 65 212 170 141 121 113 106 100 94 85 77 71 229 183 153 131 122 115 108 102 92 83 76 245 196 163 140 131 123 115 109 98 89 82 Photos208 are for illustrative purposes only. Prices specifications subject 95 to change 260 173 148 139 130 and122 115 are 104 87 without notice. 183 Prices effective January freight prices, page 111. 274 219 157 146 2014. 137 For indicative 129 122 110 see 100 91 147 118 98 84 79 74 69 65 59 54 49 180 144 120 103 96 90 85 80 72 65 60

31 38 44 50 54 59 63 66 70 39 48 55 62 68 73 78 83 88 47 58

30 37 43 48 52 57 60 64 67 38 46 53 60 65 70 75 80 84 45 55


Nozzles Section 4

VERY COARSE

EXTREMELY COARSE

Group

Chemistry

Products

FINE

MEDIUM

COARSE

ADJUVANTS

A

Fops and Dims

Sequence, Factor

3

33

33

Bonza, Supercharge

Imidazolinones

Intervix, Onduty

3

33

33

Bonza, Supercharge

Sulfonyl Ureas

Associate

3

33

Triazines

Nu-trazine 900DF, Diuron 900DF, Diurex

Benzonitriles

Bromicide 200

D

Dinitroanilines

Triflur X, Rifle 440, Stomp 440

F

Phenoxynicotinanilides

Paragon, Sniper, Nugrex, T-Rex

G

Diphenyl esthers Triazolinones

Striker, Unity, Nail 240

Benzoic Acids

Kamba 500

33

Phenoxy acetic Acids

Amicide Advance, 2,4-D amine and ester, MCPA

33

Pyradines

Archer, Transit

J

Thiocarbamates

Avadex Xtra, Approve

K

Chloroacetamides

Bouncer, Outlook

L

Bipyridyls

Revolver, Nuquat 250, Shirquat

3

33

M

Glyphosate

Weedmaster DST, Gladiator

3

33

Q

Triazoles

Amitrole, Alliance

33

33

Z

Arylaminopropionic acids

Mataven 90

33

B LI 700, Activator

33

33

33

33

Activator

C

I

3

33

3

33

33

33

33

33

33

Activator

33

3 33

3

Activator

LI 700

33

Activator

33

LI 700,

Bonza, Supercharge

Key: 3 = fine targets    33 = use 90–100 L/ha    33= stubble    33= summer

Other Spraywise Spray Qualities Chemistry

FINE

MEDIUM

COARSE

Insecticides

3

33

33

Fungicides

3

33

33

Photos are for illustrative purposes only. Prices and specifications are subject to change without notice. Prices effective January 2014. For indicative freight prices, see page 111.

VERY COARSE

EXTREMELY COARSE

Optima BUYERS’ GUIDE – JANUARY 2014

85


Section 4

Nozzles

NOTE: Colour coding for nozzle sizes are not related to colour coding FOR spray qualities

Broadcast and turf applications L/ha 50cm nozzle spacing

01 Orange

015 Green

02 Yellow

025 Lilac

03 Blue

04 Red

Bar

Flowrate

6 km/h

2 3 4 5 6 7 8 9 10 2 3 4 5 6 7 8 9 10 2 3 4 5 6 7 8 9 10 2 3 4 5 6 7 8 9 10 2 3 4 5 6 7 8 9 10 2 3 4 5 6 7 8 9 10

0.33 0.4 0.46 0.52 0.57 0.61 0.65 0.69 0.73 0.49 0.6 0.69 0.78 0.85 0.92 0.98 1.04 1.1 0.65 0.8 0.92 1.03 1.13 1.22 1.31 1.39 1.46 0.82 1.0 1.15 1.29 1.41 1.53 1.63 1.73 1.83 0.98 1.2 1.39 1.55 1.7 1.83 1.96 2.08 2.19 1.31 1.6 1.85 2.07 2.26 2.44 2.61 2.77 2.92

66 80 92 104 114 122 130 138 146 98 120 138 156 170 184 196 208 220 130 160 184 206 226 244 262 278 292 164 200 230 258 282 306 326 346 366 196 240 278 310 340 366 392 416 438 262 320 370 414 452 488 522 554 584

8 km/h 10 km/h 12 km/h 14 km/h 15 km/h 16 km/h 17 km/h 18 km/h 20 km/h 22 km/h 24 km/h 25 km/h 26 km/h 28 km/h 30 km/h 49 60 69 78 85 92 98 104 110 74 90 104 116 127 138 147 156 164 98 120 139 155 170 183 196 208 219 122 150 173 194 212 229 245 260 274 147 180 208 232 255 275 294 312 329 196 240 277 310 339 367 392 416 438

39 48 55 62 68 73 78 83 88 59 72 83 93 102 110 118 125 131 78 96 111 124 136 147 157 166 175 98 120 138 155 170 183 196 208 219 118 144 166 186 204 220 235 249 263 157 192 222 248 272 293 313 333 351

33 40 46 52 57 61 65 69 73 49 60 69 78 85 92 98 104 110 65 80 92 103 113 122 131 139 146 82 100 115 129 141 153 163 173 183 98 120 139 155 170 183 196 208 219 131 160 185 207 226 244 261 277 292

28 34 40 44 49 52 56 59 63 42 51 59 66 73 79 84 89 94 56 69 79 89 97 105 112 119 125 70 86 99 111 121 131 140 148 157 84 103 119 133 145 157 168 178 188 112 137 158 177 194 209 224 238 250

26 32 37 41 45 49 52 55 59 39 48 55 62 68 73 79 83 87 52 64 74 83 91 98 105 111 117 65 80 92 103 113 122 131 139 146 79 96 111 124 136 147 157 166 175 105 128 148 165 181 195 209 222 234

25 30 35 39 43 46 49 52 55 37 45 52 58 64 69 74 78 82 49 60 70 78 85 92 98 104 110 61 75 87 97 106 115 123 130 137 74 90 104 116 128 138 147 156 165 98 120 139 155 170 184 196 208 219

23 28 32 36 40 43 46 49 52 35 42 49 55 60 65 69 74 77 46 56 65 73 80 86 92 98 103 58 71 81 91 100 108 115 122 129 69 85 98 109 120 129 138 146 155 92 113 131 146 160 172 184 196 206

22 27 31 35 38 41 43 46 49 33 40 46 52 57 61 65 69 73 43 53 61 69 75 81 87 93 97 55 67 77 86 94 102 109 115 122 65 80 93 103 113 122 131 139 146 87 107 123 138 151 163 174 185 195

20 24 28 31 34 37 39 42 44 30 36 42 47 51 55 59 63 66 39 48 56 62 68 74 79 83 88 49 60 69 78 85 92 98 104 110 59 72 83 93 102 110 118 125 132 79 96 111 124 136 147 157 167 176

18 22 25 28 31 33 35 38 40 27 33 38 42 46 50 54 57 60 35 44 50 56 62 67 71 75 80 45 55 63 70 77 83 89 95 100 54 65 75 85 93 100 107 113 120 71 87 101 113 124 133 142 151 160

16 20 23 26 28 31 33 35 37 25 30 35 39 42 46 49 52 55 33 40 46 52 57 61 65 69 73 41 50 58 65 71 76 82 87 91 49 60 69 77 85 92 98 104 110 65 80 92 103 113 122 131 139 146

16 19 22 25 27 29 31 33 35 24 29 33 37 41 44 47 50 52 31 38 44 50 54 59 63 66 70 39 48 55 62 68 73 78 83 88 47 58 66 74 82 88 94 100 105 63 77 89 99 109 117 125 133 140

15 18 21 24 26 28 30 32 34 23 28 32 36 39 42 45 48 50 30 37 43 48 52 57 60 64 67 38 46 53 60 65 70 75 80 84 45 55 64 72 78 85 90 96 101 60 74 85 95 105 113 120 128 135

14 17 20 22 25 26 28 30 32 21 26 30 33 37 40 42 45 47 28 35 40 45 49 53 56 60 63 35 43 50 56 61 66 70 74 79 42 52 60 67 73 79 84 89 94 56 69 79 89 97 105 112 119 125

13 16 18 21 23 24 26 28 29 20 24 28 31 34 37 39 42 44 26 32 37 41 45 49 52 55 58 33 40 46 52 57 61 65 69 73 39 48 55 62 68 73 78 83 88 52 64 74 83 91 98 104 111 117

Nozzle spacing

25 cm spacing

30 cm spacing

35 cm spacing

40 cm spacing

45 cm spacing

Conversion factor

2

1.66

1.43

1.25

1.11

This 50 cm nozzle spacing table above can still be used for booms with different nozzle spacing by using the above conversion factors. For example, if pressure and speed are given, the L/ha value for 30 cm spacing can be calculated by multiplying the given L/ha table value by 1.66. And the other way around. For example, a grower wants to use 80 L/ha. His boom nozzle spacing is 30 cm. To use this table he needs to divide 80 L/ha by the 30 cm conversion factor (= 1.66). 80 L/ha ÷ 1.66 = 48.2 L/ha = a 48.2 L/ha value in this 50 cm spacing table reflects a 80 L/ha value for 30 cm spacing.

Flow Rate L/min/nozzle=

Travel Speed L/ha x km/h x W(m) 600

For example, a farmer wants to spray 70 L/ha, drive with a speed of 18 km/h and his boom has a nozzle spacing of 50 cm: L/min =

70 L/ha x 18 km/h x 0.5m

= 1.05 L/min 600 To do so he needs to us a nozzle that delivers 1.05 L/min. He has several options, for example, he could use an 025 nozzle size at 3.5 bar or an 02 size at 5.5 bar (see table). L/min/nozzle = nozzle flow rate in litre per minute L/ha = water application rate per hectare km/h = driving speed W = width of nozzle spacing in metres 600 = constant

86

Speed (km/h) =

Distance (m) x 3.6 Time (sec)

For accurate application it is important to calibrate the speed of the tractor. An easy way to do so is to drive in the gear the application will be done in, measure the time it takes to travel 100 metre and apply this simple formula. For example, it takes the farmer 20 sec to drive 100 metre. His application speed is 18km/h. Speed (km/h) =

100m x 3.6 20 sec

Application Rate Application rate (L/ha) =

www.croplands.com.au

= 18 km/h

L/min/nozzle x 600

Pressure

Spot/Band Spraying

1 bar (bar) = » 100 kilopascal (kPa) » 14.5 pounds per square inch (PSI) 1 pound per square inch (PSI) = » 6.89 kilopascal (kPa) » 0.0689 bar (bar) As a rule of thumb, to double the flow through a nozzle, the pressure must be increased four times. Higher pressures increase drift (less so for AI nozzles) and increase the rate of orifice wear.

For spot and band spraying, the same formula can be used but W (nozzle spacing) becomes the spray width divided by the number of directed nozzles. For example, a grower directs 3 nozzles over a 1 metre strip: W=

1m 3 nozzles

= 0.33 m

km/h x W

Photos are for illustrative purposes only. Prices and specifications are subject to change without notice. Prices effective January 2014. For indicative freight prices, see page 111.


Nozzles Section 4

high pressure air-induction

low pressure air-induction

low drift

CONVENTIONAL

VF

F

M

C

VC

XC

Note: Colour coding for spray qualities are not related to colour coding for nozzle sizes.

CERAMIC

STANDARD AGROTOP TIPCAP TCP 11001 TCP 110015 TCP 11002 TCP 110025 TCP 11003 TCP 11004

Turbo TeeJet tt 11001 tt 110015 tt 11002 tt 110025 tt 11003 tt 11004

3x as durable

Bar 1.5 VF F F F F F

2 VF VF F F F F

2.5 VF VF F F F F

3 VF VF F F F F

3.5 VF VF F F F F

4 VF VF F F F F

Bar 1.5 m C C C C C

2 m m C C C C

2.5 m m m C C C

3 F m m m C C

3.5 F m m m m C

4 F m m m m C

4.5 F F m m m m

5 F F m m m m

5 F C m m C m

5.5 F C m m C m

ALBUZ AXI 110 AXI 110015 AXI 11002 AXI 110025 AXI 11003 AXI 11004

ALBUZ ADI 110 ADI 11001 ADI 110015 ADI 11002 ADI 110025 ADI 11003 ADI 11004

2 F F m m m

2 m m m m C VC

2.5 m m m m m C

2.5 F F m m m

3 F F m m m

4 F F F m m

3.5 F m m m m C

4 F m m m m C

Bar 3 m m m m m C

Nufarm data supported by agrotop. This information supersedes data on previous versions distributed; Data for AM11004 – agrotop AGROTOP AIRMIX FLAT FAN AM 11001 AM 110015 AM 11002 AM 110025 AM 11003 AM 11004

agrotop turbodrop TD TD 110 015 TD 110 02 TD 110 025 TD 110 03 TD 110 04

Bar 2 m xc C vc vc vc

2.5 m vc C C vc vc

3 m C C C C C

3.5 m C C C C C

4 F C m C C C

4.5 F C m C C m

Bar 4 C C vc vc vc

4.5 C C vc C vc

5 C C vc C vc

5.5 C C vc C vc

6 C C vc C vc

6.5 C C vc C vc

7 C C vc C C

7.5 C C vc C C

8 C C vc C C

ALBUZ CVI 110 CVI 110015 CVI 11002 CVI 110025 CVI 11003 CVI 11004

ALBUZ AVI 110 AVI 11001 AVI 110015 AVI 11002 AVI 110025 AVI 11003 AVI 11004

Extremely coarse

Bar 1.5 F F m m m

agrotop xc turbodrop xc td 110015 xc td 11002 xc td 110025 xc td 11003 xc td 11004

Bar 2 C C C C C

2.5 C C C C C

3 C C C C C

3.5 C C C C C

4 C C C C C

4.5 C C C C m

5 C m m m m

Bar 3 vc vc vc vc xc xc

4 C C C C C vc

5 C C C C C vc

6 C C C C C vc

7 C C C C C vc

8 C C C C C vc

Bar 3 xc xc xc xc xc

4 xc xc xc xc xc

5 xc xc xc xc xc

6 xc xc xc xc xc

Photos are for illustrative purposes only. Prices and specifications are subject to change without notice. Prices effective January 2014. For indicative freight prices, see page 111.

7 vc vc xc xc xc

Optima BUYERS’ GUIDE – JANUARY 2014

87


Section 4

Nozzles

TeeJet Nozzles

04 Red

03 Blue

025 Lilac

02 Yellow

015 Green

01 Orange

Nozzle Size

BAR

XR

1 2 3 4 5 6 7 8 1 2 3 4 5 6 7 8 1 2 3 4 5 6 7 8 1 2 3 4 5 6 7 8 1 2 3 4 5 6 7 8 1 2 3 4 5 6 7 8

F F F

dg

tt

tt j60

aixr

ai

xc xc xc xc xc xc xc

m F F

F F F

m F F

m F F

m m m

vc C C m

m F F

m m m

m m m

C m m

C C m m

vc C C C

C m m

C C C m

xc vc C C

C m m

C C m

C C C C

xc vc C C

C m m

C C C

C C C C

xc vc vc C

m F F

tti

vc C C C C C vc vc C C C C vc vc vc C C C vc vc vc C C C vc vc vc vc C C

xc xc xc xc xc xc xc xc xc xc xc xc xc xc xc xc xc xc xc xc xc xc xc xc xc xc xc xc xc xc xc xc xc xc xc

Fertiliser Flow Rate Chart (L/Min) ALBUZ ESI Flow Rate Chart (L/min) bar

1 1.5 2 2.5 3 3.5 4

015

02

025

03

04

05

06

0.37 0.44 0.50 0.55 0.60 0.64 0.68

0.52 0.61 0.68 0.74 0.80 0.85 0.9

0.64 0.76 0.85 0.93 1.00 1.06 1.12

0.77 0.91 1.02 1.12 1.20 1.28 1.35

1.03 1.21 1.36 1.49 1.60 1.7 1.8

1.35 1.56 1.73 1.87 2.00 2.11 2.22

1.62 1.87 2.07 2.25 2.40 2.54 2.66

Note: ALBUZ ESI nozzles are ISO colour-coded.

ALBUZ EXA Flow Rate Chart (L/min) bar 1 1.5 2 2.5 3

3.5

YELLOW

RED

GREEN

BLUE

WHITE

BROWN

GREY

BLACK

0.35 0.43 0.50 0.56 0.61

0.59 0.71 0.80 0.89 0.97

0.67 0.81 0.92 1.01 1.10

0.86 1.03 1.17 1.29 1.40

1.39 1.63 1.83 2.00 2.15

1.90 2.24 2.51 2.74 2.95

2.25 2.63 2.95 3.21 3.45

3.00 3.51 3.93 4.28 4.60

0.66

1.04

1.18

1.50

2.29

3.14

3.66

4.89

Note: ALBUZ EXA nozzles are NOT ISO colour-coded.

Conversion Rate

The flow rates for the ALBUZ EXA and ESI are given for water. Liquid fertiliser has a very different viscosity and a conversion factor must be used to find the correct flow rate. (approximately 1.1 for a density of 1.2, 1.15 for a density of 1.3 and 1.2 for a density of 1.4). For example, if using a liquid nitrogen product with the density of 1.3 and the desired flow rate is 2 L/min, the correct value to look for in the table would be 2.3 L/min (1.15 (factor) x 2 L/min).

88

www.croplands.com.au

Photos are for illustrative purposes only. Prices and specifications are subject to change without notice. Prices effective January 2014. For indicative freight prices, see page 111.


Nozzles Section 4

Droplet Trajectory Comparison

FrontBack

FrontBack

droplets Trajectory of

Direction of Application 50º

Trajectory of droplets

Direction of Application

10º

Flat fan nozzle

Angled twin nozzle

Twin Caps

Twin Cap Spray Example

Spraying at Angles Application speed has an important influence on droplet trajectory. The coarser the spray quality, the more important this factor becomes as larger droplets have more initial momentum and greater velocity. Traditional flat fan nozzles face vertically downward. During application the force from the driving speed deflects the downward orientated droplets forward. Consequently, when the target area is reached the droplet trajectory is forward orientated. The higher the speed the more pronounced the effect. The coverage of the back side of target plants is always compromised under these circumstances. In knockdown, pasture or fallow situations this is not an issue but particular postem applications with fungicides and insecticides can suffer from insufficient plant coverage.

Photos are for illustrative purposes only. Prices and specifications are subject to change without notice. Prices effective January 2014. For indicative freight prices, see page 111.

Hollow cone nozzles have a fit in these situations at very low speeds. However, there are a number of flat fan nozzles with an angled spray pattern available to overcome this problem more efficiently, e.g. Turbo TeeJet TwinJet, TwinJet, DG TwinJet or agrotop HiSpeed. The most versatile angle set-up for speeds up to 10 km/h consists of a twin cap nozzle body that can be fitted with conventional XR TeeJet or agrotop AirMix nozzles or any combination of them. However, the backward orientated fan orientation is, like most other angled nozzles, only 30º and therefore too low to overcome the forward orientation at higher speed. A nozzle such as the agrotop HS with a 50º backward orientation enables a backward droplet trajectory in speeds up to 15 km/h.

Optima BUYERS’ GUIDE – JANUARY 2014

89


Section 4

Nozzles

Spraying in Stubbles The sharp increase in minimum tillage and no till farming has left many paddocks with a heavy stubble load. In those situations it is difficult to penetrate the stubble cover and achieve satisfactory coverage on the ground. Getting trapped on stubbles generally inactivates most herbicides. Many trials have shown that anticipating losses and choosing a robust product rate is most beneficial for efficacy. So is an increase in water volume and spray quality. COARSE or VERY COARSE droplets have more potential to bounce of the stubbles and land on the ground or target underneath.

Top Tips • Increase product rate • Increase water volume • Increase Spray quality to COARSE – VERY COARSE • Decrease fan angle in erected stubble • Increase spray height in erected stubble (only with minimum COARSE spray quality) • Consider using the TurboDrop nozzle.

In erected stubbles the vertical structure of the stubble row interferes with the side movement of the spray fan and can filter out spray droplets. Options to improve efficacy are to decrease the spray angle by using less than a 110° nozzle and to raise the boom height (only when using COARSE to VERY COARSE spray quality – be aware of drift!) to allow droplets a more vertical fall. This makes the agrotop TurboDrop to an ideal nozzle for stubble application. It produces a COARSE to VERY COARSE spray quality. On the paper the nozzles should produce a 110° fan angle but in reality it is more a 95°–100° angle.

Spraying Small Targets In broadacre spraying the applicator manipulates coverage mainly through droplet size and water volume. The likelihood to hit small targets can be increased with higher water volumes or by producing more droplets with a finer spray quality. If only few droplets hit a target using robust product rates increase the likelihood of delivering the lethal dose. In general, if coverage on small targets becomes a critical issue increasing the water rate is more efficient than using smaller droplets.

Most robust results on small targets are generally achieved with water rates above 80 L/ha. Many trials over recent years indicate that control of even small grass targets, when using these water rates, is at least as reliable with a COARSE spray quality as it is with a FINE/MEDIUM spray quality.

To optimise application when targeting small grasses it is advisable to increase water rates, regardless of spray quality or chemistry. If water rates are low (40– 70 L/ha) a FINE/MEDIUM spray quality is likely to be more successful than a COARSE spray quality – under ideal conditions. Under adverse weather conditions, wind or heat may reduce the efficacy of a FINE droplet application to below the efficacy levels of a COARSE droplet application.

90

www.croplands.com.au

Photos are for illustrative purposes only. Prices and specifications are subject to change without notice. Prices effective January 2014. For indicative freight prices, see page 111.


Nozzles Section 4

Low Pressure Air-Induction Nozzles NOZZLE

TYPE AND DESCRIPTION

#1 Seller AirMix

GENERAL SPRAY SAMPLE QUALITY FOR TYPE ORDER CODE

• Air-induction nozzle • Recommended range: 3–5 bar • Protected air inlets • 80–90% drift reduction

m C

Merchandising pack 10 AirMix nozzles (see page 108)

ALBUZ CVI 110°

• Air-induction nozzle • Recommended range: 2.5–5 bar • Pink ceramic • High wear resistance

AIXR TeeJet

• Air-induction nozzle • Flat-fan tapered type • 1–6 bar pressure range (manufacturer) • Croplands recommended range: 3–5 bar • 90% drift reduction

TDAM-110**

SIZE RANGE, MATERIAL SPRAY ANGLE • **01 to 06 sizes • Polymer tip • 110°

$ (EX. GST)

PROD. CAT.

11.50 Z

PR**-TDAM

**015, 02, 025, 03, 04 sizes

110.00

C

AZ-CVI-110**

• **015 to 05 sizes • Ceramic tip • 110°

21.90

Z

m C

AIXR11002-VP

• 015 to 06 sizes • Polymer tip • 110°

13.50

Z

CERAMIC 3x as durable

High Pressure Air-Induction Nozzles NOZZLE

TYPE AND DESCRIPTION

TurboDrop

GENERAL SPRAY SAMPLE QUALITY FOR TYPE ORDER CODE

• Air-induction nozzle – 2 piece • Fully ceramic • 4–8 bar pressure range • 95% drift reduction

C vc

Merchandising pack 5 x TDCFFC1100*

ALBUZ AVI

• High pressure airinduction nozzle, flat fan 110° • 3–8 bar pressure range • 90% drift reduction • Also available in 80°

C

AI TeeJet

• Air-induction nozzle • Flat-fan tapered type • 2–8 bar pressure range (manufacturer) • Croplands recommended range: 4–8 bar • 90% drift reduction

C vc

SIZE RANGE, MATERIAL SPRAY ANGLE

TDCFFC110**

• **01 to 10 sizes • Ceramic tip • Ceramic injector • 110° (reduced angle at lower pressures)

PRTD-*

*01, 015, 02, 025, 03 sizes

AZ-AVI-*015110C AZ-AVI-*01580C

AI11002-VS

$ (EX. GST)

PROD. CAT.

CERAMIC 28.50

3x as durable Z

139.00

CERAMIC 3x as durable

• Sizes 01 to 10 in 110° • 01 to 04 in 80° • Pink ceramic

21.50

Z

• 015 to 08 sizes • Stainless steel tip, polymer body • 110°

24.75

Z

Nozzles for EXTREMELY COARSE Spray Quality NOZZLE

TYPE AND DESCRIPTION

agrotop XC TurboDrop

Turbo TeeJet AI (TTI)

GENERAL SPRAY SAMPLE QUALITY FOR TYPE ORDER CODE

SIZE RANGE, MATERIAL SPRAY ANGLE

• Air-induction nozzle • 3 – 7 bar pressure range • 99% drift reduction

xc

• 01 to 10 sizes TDPFFP11002XC • Polymer • 110°

• Air-induction nozzle • Anvil-type • 1–7 bar pressure range (manufacturer) • Croplands recommended range: 2–7 bar • 99% drift reduction

xc

TTI1100**-VP

Merchandising pack 10 x TTI1100*-VP (see page 108)

Photos are for illustrative purposes only. Prices and specifications are subject to change without notice. Prices effective January 2014. For indicative freight prices, see page 111.

PRTTI-*

• **015 to 06 sizes • Polymer tip • 110°

*015, 02, 025, 03, 04 sizes

$ (EX. GST)

14.95

PROD. CAT.

Z

13.50 Z

129.00

Optima BUYERS’ GUIDE – JANUARY 2014

91


Section 4

Nozzles

Pre-orifice flat fan nozzles NOZZLE

TYPE AND DESCRIPTION

ALBUZ ADI

DriftGuard TeeJet

GENERAL SPRAY SAMPLE QUALITY FOR TYPE ORDER CODE

• Drift reduction flat-fan 110° • 2–4 bar • Easy to dismantle and clean • 50% drift reduction

m

• Pre-orifice type nozzle • Flat-fan tapered type • 2 bar pressure (manufacturer) • Croplands recommended range: 2–4 bar

m

SIZE RANGE, MATERIAL SPRAY ANGLE

$ (EX. GST)

PROD. CAT.

CERAMIC 3x as durable

AZ-ADI-110-02

• 01 to 04 sizes • Pink ceramic • 110°

13.50

DG11003-VP

• 015 to 05 sizes • Polymer tip • 110º

11.80

Z

Z

Merchandising pack 10 x DG110**-VP

PRDGVP-**

**015, 02, 03, 04 sizes

• Anvil-type nozzle • 1.5–3 bar pressure range (manufacturer) • Croplands recommended range: 2–4 bar

TT11002-VP

• 01 to 08 sizes • Polymer tip • 110°

m C

110.00

12.40

Turbo TeeJet

Z Merchandising pack 10 x TT1100*-VP (see page 108)

PRTT*-

*015, 02, 025, 03, 04 sizes

120.00

Conventional nozzles NOZZLE

TYPE AND DESCRIPTION

agrotop TipCap

• Tip and cap combined • 1.5–3 bar pressure range

GENERAL SPRAY SAMPLE QUALITY FOR TYPE ORDER CODE

SIZE RANGE, MATERIAL SPRAY ANGLE

$ (EX. GST)

PROD. CAT.

TCP11002

• 02 to 08 sizes • All polymer • 110°

F m

AZ-AXI-110015

• 015 to 05 sizes • 110° • Pink ceramic

9.30

Z

F m

XR1100**-VP

• **015 to 08 sizes • Polymer tip • 110°

5.20

Z

F m

3.50

Z

CERAMIC ALBUZ AXI

XR TeeJet

92

• Conventional flat-fan • Croplands recommended range: 1.5–3 bar

• Flat-fan tapered type • 1–4 bar pressure range (manufacturer) • Croplands recommended range: 1.5–3 bar • M to C in 05 to 08 Size

www.croplands.com.au

3x as durable

Photos are for illustrative purposes only. Prices and specifications are subject to change without notice. Prices effective January 2014. For indicative freight prices, see page 111.


Nozzles Section 4

ANGLE spraying nozzles NOZZLE

GENERAL SPRAY SAMPLE QUALITY FOR TYPE ORDER CODE

TYPE AND DESCRIPTION TurboDrop HS (Dual Angle)

• Air-induction nozzle • Fully ceramic • 4–8 bar pressure range • 90% drift reduction • 60° angle, 10° forward, 50° backward

AirMix Angle Spray Combo • Includes TD-TWIN cap and 2 AirMix nozzles (please specify size) • 60° angle

ALBUZ CVI Twin

• High-pressure twin angle air-induction • 65° angle between 2 110° flat fans • 90% drift reduction

SIZE RANGE, MATERIAL SPRAY ANGLE

m C

• 015 to 05 sizes • Ceramic tip TDCFFC11002DA • Ceramic injector • 110°

m C

TDTWIN-AM**

• 01 to 06 sizes • Polymer tip

AZ-CVIT-11002

• 015 to 05 sizes • Pink ceramic • 110°

C

$ (EX. GST)

PROD. CAT.

CERAMIC 3x as durable 28.50

Z

25.95

Z

CERAMIC 3x as durable 28.50

Z

AI Turbo TwinJet

• Air-induction • 60° between leading and trailing spray patterns • Best suited to post emergence applications • Recommended range: 3–5 bar

C vc

• 02 to 06 sizes AITTJ60-110**VP • Polymer tip • 110°

17.55

Z

Turbo TwinJet

• Anvil-type nozzle (twin) • 1–6 bar pressure range (manufacturer) • Croplands Recommended range: 1.5–3 bar

m C

• 02 to 06 sizes TTJ60-11002-VP • Polymer tip • 110°

12.50

Z

Fertiliser Nozzles SAMPLE ORDER CODE

DESCRIPTION

AZ-EXA-BN

• 3-stream liquid fertiliser application • 1–3.5 bar • Very Coarse droplets • For flow rate chart see website

17.90

Z

AZ-ESI-02

• 6-stream liquid fertiliser application • Pink ceramic • 1–4 bar • Very Coarse droplets • ISO colour coded • For flow rate chart see website

20.90

Z

SJ3-**VP (** denotes size)

• 3-orifice StreamJet for fertiliser application • Acetyl construction for chemical resistance • Available in sizes: ** 015, 02, 03, 04, 05, 06, 08, 10, 15 and 20 (ISO coding) • For use with TeeJet cap 25598-3-NYR, at 500mm spacings

19.45

Z

SJ7-**-VP (** denotes size)

• 7-orifice StreamJet for fertiliser application • Acetyl construction for chemical resistance • Available in sizes: **015, 02, 03, 04, 05, 06, 08, 10 and 15 (ISO coding) • For use with TeeJet cap 25598-3-NYR, at 500mm spacings

25.45

Z

Photos are for illustrative purposes only. Prices and specifications are subject to change without notice. Prices effective January 2014. For indicative freight prices, see page 111.

$ (EX. GST)

Optima BUYERS’ GUIDE – JANUARY 2014

PROD. CAT.

93


Section 4

Nozzles

Spray Drift is a major concern in most agricultural areas today. The presence of sensitive areas located within close proximity to the spray target area introduces the possibility of off-target deposition. It is more important than ever that the agricultural industry demonstrates responsible chemical usage to reduce the need for severe application restrictions. For further information on chemical application or involvement in a Spraywise training course, please contact your local Nufarm Territory Manager at www.nufarm.com.au

94

Inversions • DANGER – DO NOT spray when a low-level inversion exists • During those inversions distinct, isolated layers of air have formed close to the ground. As a result driftable fines are not subject to dilution with the atmosphere • Low-level inversions frequently form in the late evening and strengthen overnight – they are

strongest near sunrise • Use visual indicators such as moisture, smoke or dust to determine if a low-level inversion is present • Rule of thumb: the greater the difference between daily maximum and minimum temperatures, the stronger the low-level inversion.

Night Spraying • The advent of GPS self-steer and a desire to work within appropriate Delta Ts has seen an increasing trend towards night spraying, particularly during the summer months. Spraying at night dramatically increases the chance of applying product in adverse conditions

• Night spraying can strongly favour conditions that can trap and move the applied product far from the target area (see inversions). Be particularly vigilant one hour either side of sunrise • Be aware that the rainfast period will be longer • Obtain forecast and monitor for still or low-level inversion conditions.

Wind Speed and No-Spray (Buffer) Zones • It is best to apply pesticides when the wind is blowing away from sensitive areas and crops. Wind speed must be steady between 3 km/h and 15 km/h • If the wind stops blowing at night – stop spraying immediately (see inversions)

• Always read the label to see if a mandatory wind speed requirement exists, or if a Nospray zone is required for any of the products you plan to use • Rule of thumb: most directional wind changes in Australia will occur in an anti-clockwise direction.

Spray Weather Summary • Avoid calm, variable or gusty wind (calm conditions give no positive indication of droplet displacement) • Be aware of local topographic and convective influences on wind speed and direction • At night the cool (heavier) air behaves like water and drains to lower points (waterways, frost-prone paddocks) taking any fine droplets

suspended in the air with it as well • Record on-site weather conditions at the start and finish of every pesticide application.

www.croplands.com.au

Photos are for illustrative purposes only. Prices and specifications are subject to change without notice. Prices effective January 2014. For indicative freight prices, see page 111.


Nozzles Section 4

Plan • Utilise tools such as www.spraywisedecisions.com.au to plan the most appropriate application windows • Spraying in a cotton area? Check www.cottonmap.com.au for neighbouring fields prior to application

• Read the product label • Communicate with neighbours • Upskill by attending a Nufarm Spraywise training course or one run by specialist application consultants such as Bill Gordon, Graham Betts or Craig Day.

Boom Height/False Target • Boom height needs to be adjusted to the height of the false target (stubble height) or the height of the target – whichever is greater • Keep boom height to a minimum (i.e. 500mm above target/false target for 110° nozzles at 500mm nozzle spacing)

• Increasing the boom height from 500mm to 700mm may double the amount of driftable fines and a boom height increase from 500mm to 1,000mm multiplies them up to four times.

Spray Quality • A COARSE to VERY COARSE spray quality must be used when applying 2,4-D products – EXTREMELY COARSE may be warranted if night spraying • Choose the nozzle producing the coarsest spray quality without compromising efficacy. Refer to Nufarm’s Boom Spray Application Guide for a full range of recommended water rates and

spray qualities for all Nufarm products • If needed, include drift-reducing adjuvants such as LI 700, Activator or Bonza • Use nozzles at appropriate pressure: conventional nozzles 1.5–3 bar, pre-orifice nozzles 2–4 bar, low pressure airinduction nozzles 3–5 bar, high pressure air-induction nozzles 4–8 bar.

Selecting the right delta T conditions for spraying

NEVER SPRAY DURING A LOW-LEVEL INVERSION

Photos are for illustrative purposes only. Prices and specifications are subject to change without notice. Prices effective January 2014. For indicative freight prices, see page 111.

Optima BUYERS’ GUIDE – JANUARY 2014

95


Section 4

Nozzles

Nozzles – Specialised application (banding, off-centre, turf, flood and BoomJet) NOZZLE

TYPE AND DESCRIPTION

SAMPLE ORDER CODE

SIZE RANGE, MATERIAL SPRAY ANGLE

$ (EX. GST)

PROD. CAT.

ALBUZ OCI

• Ceramic • Off centre

AZ-OCI-02-80C

• 02, 03 and 04 sizes • Pink ceramic • 80°

28.50

Z

ALBUZ AVI

• Air-induction • Off centre

AZ-AVIOC-8002

• 01 to 04 sizes • Pink ceramic • 80°

35.00

Z

Turbo TurfJet

• Wide angle flat spray pattern • Extremely coarse droplets • Designed for turf applications • 1.5–5 bar pressure range

¼TTJ05-VP

• 02 to 15 polymer

15.95

¼TTJ05-VS

• 02 to 15 stainless steel

35.75

TF-VP4

• 2 to 10 polymer

TF-VS4

• 2 to 10 steel

27.55 24.80

Z

482.45

Z

Turbo FloodJet

• Wide angle flat spray pattern • Extremely coarse droplets • Precise distribution pattern • 1–3 bar pressure range

FloodJet

• Wide angle flat spray pattern • 1–3 bar pressure range

TK-VS3

• 2 to 10 stainless steel tip, polymer body

BoomJet

• Large capacity boomless nozzle • Extra-wide flat spray projection • Ideal for difficult access areas when spraying • Useful for liquid fertiliser applications

5880-¾-2TOC20

• 10 to 40 brass

XP BoomJet

• Boomless flat spray nozzles • Useful for roadside, end-row, orchard or forestry applications • Extra-wide spray pattern • Left and right options • 1–4 bar pressure range • Excellent distribution

B¼XP20L-VP B¼XP20R-VP

• 10, 20 and 25¼” acetal left and right options

B½XP40L-VP B½XP40R-VP

• 40 and 80 ½” acetal left and right options

Z

6.20

Z

84.55 Z 101.75

OU

O TA RT

L QUALITY

COM

MI

TM

E

NT

CROPLA

2 YEA

NDS

R

WARR A jE

CT

Spraywise Logbook

T

Spraywise Broadacre Application Handbook

O

Handbook, Logbook and Calibration Guide

An easy to use spray logbook for farmers and cooperatives. The applicator can detail weather and growing conditions, location, mix-up and set-up details. Includes 50 pages with double carbon copies, Spraywise nozzle chart, application guide, mixing guide and valuable tips to avoid drift.

SPRAYWISEBK

Spraywiselog Spraywise Logbook

96

N ds TER s ANd CO M

dI

TI

ON

Features Temperature in °C or °F Relative humidity in % (does not need re-calibration) Wet bulb temperature in °C or °F Dewpoint in °C or °F Delta T in °C or °F

Spraywise Logbook

Spraywise Application Handbook

LAN

NTY

Weather plays an important part during application. Measuring conditions on the spot such as wind speed, Delta T and temperature make a vital difference in the daily decision making of an applicator. Recording weather data is a mandatory label requirement. For everybody who applies chemicals, the WindMate is a must have tool.

The Spraywise Broadacre Application Handbook guides the reader through the complex process of spray application. It deals with how to choose and use the right nozzle for specific applications, boom set-up, unfavourable weather conditions and many more essential topics. It enables growers to make informed decisions about how to increase their operational flexibility without losing efficacy (60 pages).

DESCRIPTION

Op

ATE

WindMate Hand-Held Weathermeter

Spraywise Broadacre Application Handbook

ORDER CODE

CR

s

sUb

ON WINDM

$ (EX. GST)

PROD. CAT.

49.90

X

26.00

W

www.croplands.com.au

Windspeed in Km/hr, MPH, knots, M/Sec, Ft/min, Beaufort (gives maximum and average) Compass and wind direction (using wind vane) Comfort index (takes into account the impact of wind, temperature, relative humidity and sun strength

ORDER CODE

DESCRIPTION

L-H6001

WindMate

$ (EX. GST) 302.50

PROD. CAT. X

Photos are for illustrative purposes only. Prices and specifications are subject to change without notice. Prices effective January 2014. For indicative freight prices, see page 111.


Nozzles Section 4

calibration SuMMary Boom sprayers need to be correctly calibrated in order to deliver the desired amount of chemical onto the target. A poorly calibrated boom sprayer may result in: • Increase in chemical costs • Increase in crop effect • Decrease in efficiency

• Calculator • Nozzle cleaning brush • Tape measure, or other device to measure a distance of 100m Before starting the calibration the spray equipment needs to be checked to eliminate basic faults.

• Potential loss in yield Even a minor 10 % change in flow rate will add up to large sums… Therefore it is advisable to calibrate the boom sprayer at least every 12 months. This is less complicated than many people think. The following procedure is aimed to provide a practical on-farm guide.

• Nozzles – all fitted nozzles should be of the same type and size. Their spray pattern should be even (nozzles and strainers may need to be cleaned and may need to be replaced if necessary). • Boom – hoses and joins should be checked for leaks. All systems should be in operating order.

The following equipment is needed:

• Tank – should be half filled with water.

• A watch, displaying seconds

The boom spray calibration is affected by two main factors:

• A jug, displaying a volume scale

A) Travel speed (Step 1) and

• At least one new nozzle of the type fitted onto the boom

B) The output of nozzles (Step 2 – 5)

• Nozzle tip reference tables to determine flow rates and spray quality (available from Nufarm/Croplands)

In the following procedure these two factors are checked independently, but ultimately, they are inseparably linked together.

Step 1: Speed calibration To measure travel speed accurately it is important to do so by travelling over an exact distance (commonly 100 m) and to measure the time it takes to travel that distance. To mark the precise distance the use of a measuring tape is essential. Permanent markers will make this measured stretch a handy tool on farm. It is advisable to undertake the calibration in the gear and RPM’s the applications are commonly done with. The tank should be half filled. Sufficient run up assures that the starting line is crossed already travelling at desired speed.

20 sec

It is worthwhile to repeat the procedure at least twice to eliminate any possible error. The travel speed in km/h can then be calculated from this simple formula: km/h = Distance (m) x 3.6 / time (sec). eXaMple It took 20 sec (measured twice to be sure) to travel 100 m. The speed is 100 m x 3.6 / 20 sec = 18 km/h.

noteS:

Photos are for illustrative purposes only. Prices and specifications are subject to change without notice. Prices effective January 2014. For indicative freight prices, see page 111.

Optima BUYERS’ GUIDE – JANUARY 2014

97


Section 4

Nozzles

Step 2: calculation of nozzle flowrate At first it is necessary to work out what the nozzle output should be. The nozzles can then be checked to see if they are delivering the flow rate they are supposed to deliver. For this calculation three things need to be determined: 1) What is the preferred application speed (already measured) 2) What is the preferred water rate per ha application VoluMe 3) What is the nozzle spacing on the rig nozzle Spacing The most common spacing between nozzles on boom sprayers is 50 cm. It is important to be sure about the correct nozzle spacing, and if in doubt, measuring is advisable. eXaMple The measurement was 50 cm.

The desired application volume in L/ha can be obtained from pesticide labels or other publications from manufacturers (e.g. Nufarm Boom Spray Application Guide). EXAMPLE

The product used was Weedmaster DST for control of summer weeds and the information from Nufarm advised that 40–70 L/ha was a sufficient water rate. Because the paddock contained stubble, it was recommendable to use a higher water rate. Therefore the 70 L/ha rate was chosen.

calculation

L/min/nozzle =

L/ha x km/h x W(m) 600

L/min/nozzle

= Nozzle flow rate in litre per minute

L/ha

= Water application rate per hectare

Km/h

= Driving speed

W

= Width of nozzle spacing in m

600

= Constant

1,984 ÷ x 9 – 6 + 2 3 = . c

mc mr m+ m–

A simple formula is transforming all this ‘large scale’ application information into a single, easy to measure ‘output per nozzle, per minute’ figure.

7

8

4

5

1 0

1,984 ÷ 9 x 6 – + 2 3 . c =

m+ m– mc mr

7 4 1 0

8

5

eXaMple The desired water rate was 70 L/ha, applied with a speed of 18 km/h and the boom had a nozzle spacing of 50 cm: L/min =

70 L/ha x 18 km/h x 0.5 m 600

= 1.05 L/min

To achieve this goal every single nozzle needed to deliver 1.05 L/min.

Step 3: Selecting preSSure and Spray quality Nozzles deliver different flow rates and droplet sizes (more commonly called spray quality) at varying pressures. The pressure needed to produce a certain flow rate for a specific nozzle type and size can be found in specific tables (Croplands Optima Catalogue, Nufarm Nozzle Charts, TeeJet Catalogue). For efficacy and legal reasons it is important to be clear about the spray quality a specific nozzle type is going to produce. If in doubt an advisor should be consulted. For example, it is not desirable to calibrate and set up a nozzle type and size that can only spray FINE to MEDIUM spray quality when the chemical that is going to be put out has to be sprayed with a COARSE to VERY COARSE spray quality. To minimise chemical loss through drift it is advisable to choose a set up that is producing the coarsest spray quality without compromising efficacy. Desired spray quality information can be obtained from chemical labels or additional information put out by manufacturer (e.g. Nufarm Boom Spray Application Guide, Croplands Optima Catalogue).

98

www.croplands.com.au

eXaMple To control summer weeds, the chemical chosen was Weedmaster DST, selecting a COARSE spray quality, according to the Nufarm Boomspray Application Guide. The boom was fitted with AirMix 025 nozzles. According to the Nufarm Nozzle Chart reference, the pressure set up needed to be around 3.3 bar to get the desired flow rate of 1.05 L/min. The Nufarm Nozzle Chart showed that at 3.3 bar this nozzle type and size is producing a COARSE spray quality. Therefore this nozzle type was suited for the planned application. The boomsprayer needed to be set up to spray at 3.3 bar to deliver the desired flowrate and spray quality.

Photos are for illustrative purposes only. Prices and specifications are subject to change without notice. Prices effective January 2014. For indicative freight prices, see page 111.


Nozzles Section 4

Step 4: preSSure Set-up All the theoretical work on nozzle flow rates is now finalised. At least one old nozzle needs to be replaced with a new nozzle of the same type (the old nozzles may be worn). The sprayer can be turned on now and the desired pressure can be selected. If the pressure gauge is measuring the pressure at the nozzle end, measuring can start now. However, many gauges are measuring the pressure at the pump end. In this case one nozzle needs to be replaced with a nozzle pressure Gauge (obtainable from Croplands) to measure the correct pressure at the nozzle end. As a rule of

thumb, if the pressure between pump and nozzle end varies by more than 20 % there is a serious pressure drop and the system should be checked. The tank should be filled with water only since all table values are based on water.

Step 5: MeaSuring nozzle flow rate While spraying, a jug must be placed underneath the new nozzle to collect fluid for a duration of 60 seconds. Effectively this is measuring the output per nozzle per minute. If the output is too high for the scales of the jug, the time may be halved to 30 sec. In this case the measured volume needs to be doubled to refer back to a per minute output. The measured volume can now be compared to the theoretical value calculated above. Depending on the difference, the pressure may need some fine-tuning to obtain exactly matching flow rate values. Individual nozzle outputs may vary. Therefore, measurements should be repeated with a minimum of three nozzles per boom section to check for nozzle wear. All outputs should be within a 10% range. If more than one nozzle is out of range, the whole nozzle set should be replaced.

psi

60 sec

eXaMple An old Airmix 025 was replaced with a new one. The pressure was set at 3.3 bar at the nozzle end. The measured flow rate of the new nozzle was 1.0 L/min. Therefore the pressure needed to be slightly increased to 3.5 bar and the flow rate was brought up to the desired 1.05 L/ min for the new nozzle. The boom had 5 sections and therefore measurements needed to be repeated for three nozzles in each section. Results were: 1.05

1.00

1.05

1.00

1.15

1.05

1.15

1.05

1.00

1.00

1.05

1.00

1.05

1.15

1.00

Three of the nozzles had a flow rate differing by around 10 % from the desired out put. A re-check of those three nozzles gave the same result. Therefore, there was little confidence in the future performance of the whole set. The two-year-old set needed to be replaced. After replacement, the new nozzles were checked again and flow rates were uniform at 1.05 L/min.

Step 5b: alternatiVe MeaSuring of nozzle flow rate Rather than using a jug and timer, an instant Tip Tester can be used. This method is not as accurate but handy to do a quick check or compare many nozzles in a short space of time. The Tip tester has a rubber seal that is placed tightly over the nozzle. The actual flowrate coming out of the nozzle pushes up a little ball in a tube. By looking at the position of the ball the flow rate can be read directly from a scale (see picture).

Photos are for illustrative purposes only. Prices and specifications are subject to change without notice. Prices effective January 2014. For indicative freight prices, see page 111.

Optima BUYERS’ GUIDE – JANUARY 2014

99


Section 4

Nozzles

Step 6: autoMatic rate controller At the initial set up of the machinery, precise inputs Many boom sprayers are set up with automatic rate into the rate controller would have assured precise controllers that will allow a constant per ha output operation. with varying speeds by adjusting the flow rate. However, over time, machinery will wear, therefore, The two main factors governing the system are it is important to check if initial inputs are still in again the precise measuring of: calibration. A) Speed B) Flow rate flowMeter

Speed

The greater the water volume measured the more precise the outcome will be. It is not practical to obtain overall boom flow rates through nozzles. Therefore the easiest way is to take off a section of boom hose (all other sections need to be closed) and to fill a measuring drum up to the 100 L mark. The 100 L volume can then be compared to the volume measured by the flowmeter. If necessary controller inputs need to be adjusted (refer to individual controller handbooks).

The actual procedure to reset the rate controller will be different from system to system but in principal it will be the same. An exactly measured 100 m distance (see Step 1) needs to be travelled and compared to the distance calculated by the rate controller. If necessary the controller inputs need to be changed (refer to controller handbook).

Calibration Kit

A complete kit to easily calibrate any spray boom accurately. Kit includes: »» Tip tester »» Gauge with quick-fit cap and seal to fit quick-fit nozzle bodies (includes Hardi adaptor seal for use on Hardi bodies) »» 1 litre measuring jug »» Protective gloves »» Manual and handy tool box for the components

Calibration Tip Tester

A very handy quick-check tip tester for use with most broadacre nozzle types. Provides a fast and independent measurement of a single nozzle’s flow rate. Slip the adaptor over the nozzle body and read the output off the tip tester.

10 0

www.croplands.com.au

SpotOn Sprayer Calibrator

»» »» »» »»

Avoid costly over or under application of chemicals Accurate flow rate measurement in seconds Quickly find worn spray nozzle tips Fast and simple operation

ORDER CODE DESCRIPTION

$ (EX. GST)

PROD. CAT.

RP-034

Calibration kit

272.25

Y

L-H9200

SpotOn Sprayer Calibrator

306.25

X

37670

Tip Tester

189.49

Y

Photos are for illustrative purposes only. Prices and specifications are subject to change without notice. Prices effective January 2014. For indicative freight prices, see page 111.


Nozzles Section 4

hollow cone

06 04

02

06

04

02

04

Hollow Cone Air-Induction Nozzles Drift avoidance becomes an ever increasing problem in horticultural tree and vine applications. Hollow cone air-induction nozzles, such as the ALBUZ TVI, utilise the well proven venturi principle to produce coarser droplets. Drift is reduced but so is coverage. The final verdict is still to come. Initial results indicate that air-induction nozzles provide good coverage when spraying dilute volumes. To make them work in concentrate spraying it is probably essential to have a very efficient sprayer (Quantum Mist) and to increase the spread of droplets with adjuvant technology (Du-Wett). In New Zealand the kiwi industry uses airinduction nozzles at certain applications as standard, but only in combination with well spreading adjuvants.

OPTIMAL PRESSURE RANGE

20

02

06

OPTIMAL PRESSURE RANGE

18

20

04

See page 105

14 16

18

OPTIMAL PRESSURE RANGE

12

06

08 16

02

14

See page 105

14

20

air induction

10

12

18

08

12

10

16

hollow cone

10

20

• the Core or swirl plate. The swirl plate has angled slots that force the liquid into a centrifugal spin • the following Swirl Chamber allows the liquid to settle into spin • the Disc, or orifice, that meters the final cone pattern when droplets are emerging. Cone nozzles can come as a fully assembled single nozzle body, e.g. ALBUZ ATR, or in separate parts that need to be assembled into a nozzle body, commonly referred to as Cones and Discs. Pressure used by operators is generally high (5–20 bar).

08

18

OPTIMAL PRESSURE RANGE

air induction

16

Cone Nozzles See page 106 10 12 1 4 08 The most commonly used nozzle types in horticulture are cone nozzles. Cone nozzles can be divided into hollow cone and solid cones nozzles. They have three principal parts:

Hollow Cone Nozzles Hollow cone nozzles produce generally a FINE to VERY FINE spray quality with a narrow droplet spectrum. The Disc has no hole in the centre and all the liquid is forced to spin. Their droplets emerge with a low kinetic energy and may not reach 2 metres if no air-assist is provided. The small, consistent droplet size and the low energy levels favour deposition and coverage and make them to the preferred nozzle type in air-assisted vine and tree spraying. The FINE droplets are prone to drift.

See page 106 Solid Cone Nozzles In contrast to a hollow cone set up, the cores of solid cones nozzles have an extra hole in the centre that allows part of the liquid to pass straight to the disc and fill the inner cone pattern. Those droplets travel straight with the airstream, have more kinetic energy and may reach as far as 4 metres without air-assist. The uniformity of droplet size is decreased with the centre hole producing coarser droplets. Distance is improved but the potential for deposition and coverage on short distance is reduced. Striping may occur if the canopy target is to close. Solid cones are generally used to achieve better coverage on distanced targets such as the top of a tree. See page 106 Solid Stream Jet In solid cone nozzles, the bigger the hole in the middle of the disc the more centred becomes the output. In a solid stream jet design the complete core is removed, leaving the nozzle only with a single orifice in the disc. All liquid travels in direction of the airstream, has high kinetic energy and may reach as far as 6 metres without air-assist. Spray quality is even coarser and short range deposition is further compromised. Because it is very difficult to achieve liquid breakup into droplets with this set-up it is paramount to use high pressures around 20 bar or above. Solid stream jets are used to cover even further distanced targets such as tops of tall trees.

Photos are for illustrative purposes only. Prices and specifications are subject to change without notice. Prices effective January 2014. For indicative freight prices, see page 111.

Optima BUYERS’ GUIDE – JANUARY 2014

101


Section 4

Nozzles

Spraywise Orchard/Vineyard Nozzle Selection Step 1. Work out the dilute L/100m rate from the Spraywise Dilute table per row (page 103).

Step 3. Work out the individual flow rate for each nozzle. If all nozzle are the same size you can simply divide the total flow rate per row by the number of nozzles per row.

For example, a 1.5 metre grape VSP canopy has a dilute volume of 30 L/100m row (1.5 x 20 L).

For example, we have 24 nozzles per row and needed a total flow rate of 40 L/min. Each nozzle needs to put out 1.66 L/min (40/24). If several nozzle sizes are preferred the volume needs to be split. For example, rather than looking at all 24 nozzles putting out the same you could look at 12 nozzles putting out 25 L/min and 12 nozzles putting out 15 L/min. To obtain single nozzle flow rates simply divide the Total Flow/m

Use table 1 (page 104) to sanity check what this L/100m rate represents in L/ha. Select your row spacing and follow the column down until you reach 30 or the nearest number. If you follow the row to the left the table will give you the per ha volume. Or you can work reverse from the per ha rate to find the L/100m rate.

1

Total Flow (L/min) ‹—› Sing

2 Row Spacing (m) 1.6 1.6 2.4 3.2 4 11.2 12 12.8 14.4 16 17.6 19.2 21 22

1.8 1.8 2.7 3.6 4.5 12.6 13.5 14.4 16.2 18 19.8 22 23 25

2 2 3 4 5 14 15 16 18 20 22 24 26 28

2.1 2.1 3.1 4.2 5.2 15 16 17 19 21 23 25 27 29

2.4 2.4 3.6 4.8 6 17 18 19 21 24 26 29 31 33

2.5 2.5 3.8 5 6.3 17.5 18.8 20 23 25 28 30 33 35

2.7 2.7 4 5.4 6.7 18.9 20 22 24 27 30 32 35 38

2.8 2.8 4.2 5.6 7 19.6 21 22 25 28 31 34 36 39

1

1.5

2

2.5

3

16 20

12 15

9.6 12

28 76

21 57

16.8 46

8 10 12 14 38

136 144 152 160 168 176 184 192

102 6 108 114 7 120 126 8 132 9 138 144

82 86 91 96 101 106 110 115

68 72 76 80 84 88 92 96

4 5 6 7 19

24 30 36 42 114

4

34 204 36 216 38 228 40 240 42 252 44 264 46 276 Bar 48 288

Step 2. Work out the total flowrate of your pump per minute/row by matching the per 100m rate with your speed.

24 18 14.4 PRESSURE

5

Total Flow min) Formula

102

2 3 4 5 6 7 19

1.5 8 12 16 20 24 28 76

2 6 9 12 15 18 21 57

2.5 4.8 7.2 9.6 12 14.4 16.8 46

3 4 6 8 10 12 14 38

34 36 38 40 42 44 46 48

204 216 228 240 252 264 276 288

136 144 152 160 168 176 184 192

102 108 114 120 126 132 138 144

82 86 91 96 101 106 110 115

68 72 76 80 84 88 92 96

L/100 m ‹—› L/min Travel Speed (km/h) 3.5 4 3.4 3 5.1 4.5 6.9 6 8.6 7.5 10.3 9 12 10.5 33 29 58 62 65 69 72 75 79 82

51 54 57 60 63 66 69 72

4.5 2.7 4 5.3 6.7 8 9.3 25

5 2.4 3.6 4.8 6 7.2 8.4 23

5.5 2.2 3.3 4.4 5.5 6.5 7.6 21

6 2 3 4 5 6 7 19

45 48 51 53 56 59 61 64

41 43 46 48 50 53 55 58

37 39 41 44 46 48 50 52

34 36 38 40 42 44 46 48

L/100 m = L/min x 6 ÷ speed

6.5 7 8 9 10 1.8 1.7 1.5 1.3 1.2 2.8 2.6 2.3 2 1.8 3.7 3.4 3 2.7 2.4 4.6 4.3 3.8 3.3 3 5.5 5.1 4.5 4 3.6 6.5 6 5.3 4.7 4.2 17.5 16.3 14.3 12.7 11.4 31 33 35 37 39 41 42 44

29 31 33 34 36 38 39 41

26 27 29 30 32 33 35 36

L/min = L/100 m x speed ÷ 6

www.croplands.com.au

4

4.5

5

6.9 6 8.6 7.5 10.3 9 12 10.5 Yellow 33 29

5.3 6.7 8 9.3 25

4.8 6 7.2 8.4 23

4.4 4 5.5 5 6.5 6 7.6 7 Orange 21 19

58 51 62 0.8 54 65 57 0.86 69 60 72 0.92 63 75 66 79 0.97 69 82 72

45 48 51 53 56 59 61 64

41 43 46 48 50 53 55 58

37 34 1.0836 39 41 1.1738 44 40 46 1.24 42 48 44 1.32 50 46 52 48

23 24 25 27 28 29 31 32

5

BAR

0.73

10 m = L/min x 61.03 L/100 ÷ speed 11 1.07

5.5

6

6.5

7

8

9

10

0.99

3.7 3.4 3 2.7 2.4 4.6 4.3 3.8 3.3 3 5.5 5.1 4.5 4 3.6 6.5 6 Red 5.3 4.7 4.2 17.5 16.3 14.3 12.7 11.4

1.38

31 33 35 37 39 41 42 44

29 31 33 34 36 38 39 41

26

1.51 27 29 1.62 30 32 1.73 33 1.83 35 36

1.92 L/min1.39 = L/100 m x speed ÷6 1.45 2.01

23 24 25 27 28 29 31 32

20 22 23 24 25 26 28 29

Grey 1.5 1.63 1.76 1.87 1.98 2.08 2.17

12

1.12

1.51

2.09

2.26

13

1.17

1.57

2.17

2.35

14

1.21

1.63

2.25

2.43

For example, you want to drive 8 km/h. Find 8 km/h on the top of table 2 and follow the column down until you reach 30 or the nearest number. If you follow the row to the right the table will give you the total flowrate atr Hollow you need per row to put out 30 L/100m at 8 km/h. The flowrate is 40 L/min per row. PRESSURE

1 12 18 24 30 36 42 114

3.5

2 12 Hollow 8 6 4.8 4 3.4 Cone 3 2.7 2.4 Flowrate 2.2 2 1.8 1.7 1.5 1.3 chart 1.2 ATR 3 18 12 9 7.2 6 5.1 4.5 4 3.6 3.3 3 2.8 2.6 2.3 2 1.8

Formula

2

L/100 m ‹—› L/min Travel Speed (km/h)

Step 4. For example, having 24 nozzles per row and spraying 36 L/min r Match up pressure and nozzles size to achieve these Formula: Total output L/min = no of nozzles x single nozzle outpu outputs in table on page 105.

Total Flow min)

L/ha

100 150 200 250 700 750 800 900 1000 1100 1200 1300 1400

3

cone flowrate cHart Yellow

Orange

Red

0.73

0.99

1.38

Grey 1.5

6

0.8

1.08

1.51

1.63

7

0.86

1.17

1.62

1.76

8

0.92

1.24

1.73

1.87

9

0.97

1.32

1.83

1.98

10

1.03

1.39

1.92

2.08

11

1.07

1.45

2.01

2.17

12

1.12

1.51

2.09

2.26

13

1.17

1.57

2.17

2.35

14

1.21

1.63

2.25

2.43

20 22 23 24 25 26 28 29

Photos are for illustrative purposes only. Prices and specifications are subject to change without notice. Prices effective January 2014. For indicative freight prices, see page 111.


Nozzles Section 4

Spraywise Dilute

General Guideline to Dilute Volume in Orchards and Vineyards

L/100 m per m Canopy Height 20

Apples, Pears

45

50 … 70

Fungicides some Miticides, PGRs

some Miticides Insecticides, some Oils some Oils, PGRs Fungicides

Grapes

VSP

Sprawl

some PGRs

Macadamias

Tomatoes

40

Fungicides

Citrus

Stonefruits

35

some Miticides

Cherries

Olives

30

Fungicides

Avocados

Mangoes

25

VSP

Sprawl

Fungicides some Miticides Fungicides some Insect./Miticides Insecticides

Fungicides some Insect./Miticides Fungicides

Trellis

some Insect./Miticides

= indicates Dilute Volume, sprayed to the point of run-off

IMPORTANT: •

Volumes are given for full canopy.

= indicates light Flood Volume, above the point of run-off (some miticides, insecticides and PGRs may benefit)

Volumes may vary according to canopy type, e.g. VSP vs Sprawl, shape and density. Use the lower end of the spectrum for easier to cover targets, e.g in grapes use 20–25 for VSP and 25–30 for Sprawl.

Height considers canopy height only - excluding the trunk.

Guidelines assume that the sprayer is set up to cover the canopy height. In early season grapevine applications the minimum sprayer width becomes the canopy height! For example, a QM head covers 1 m. It can not be reduced to cover 10 cm shoots only. Therefore the dilute volume has to operate on the minimum width the equipment can produce.

Example: A 3m high apple canopy should need a dilute rate between 60 and 75 L /100 m ( 3 x 20 or 3 x 25). As a sanity check, at a rowspacing of 4 m that converts to 1500 to 1900 L/ha (see table next page). If not sure which way to go, as a sophisticated guess, the middle should be close, e.g 70 L/100 m.

Rate for Early Season Applications in Deciduous Tree/Vine Crops (in L/100 m per m Canopy Height)

Budburst 14L

(70 % of 20 L)

1st Spray

BB + 10 days

16L

(80 % of 20 L)

Photos are for illustrative purposes only. Prices and specifications are subject to change without notice. Prices effective January 2014. For indicative freight prices, see page 111.

2nd Spray

3rd Spray

18L

Full rate

BB+20 days

(90 % of 20 L)

BB+30 days

Optima BUYERS’ GUIDE – JANUARY 2014

103


Section 4

Nozzles

L/ha ‹—› L/100 m

1

Row Spacing (m) 1.6 1.6 2.4 3.2 4 4.8 5.6 6.4 7.2 8 9.6 11.2 12 12.8 14.4 16 17.6 19.2 21 22 24 26 27 29 30 32 40 48 64 80 96 112 128 144 160

L/ha

100 150 200 250 300 350 400 450 500 600 700 750 800 900 1000 1100 1200 1300 1400 1500 1600 1700 1800 1900 2000 2500 3000 4000 5000 6000 7000 8000 9000 10000 Conversion 62.5 Factor

1.8 1.8 2.7 3.6 4.5 5.4 6.3 7.2 8.1 9 10.8 12.6 13.5 14.4 16.2 18 19.8 22 23 25 27 29 31 32 34 36 45 54 72 90 108 126 144 162 180

2 2 3 4 5 6 7 8 9 10 12 14 15 16 18 20 22 24 26 28 30 32 34 36 38 40 50 60 80 100 120 140 160 180 200

2.1 2.1 3.1 4.2 5.2 6.3 7.3 8.3 9.4 10 13 15 16 17 19 21 23 25 27 29 31 33 35 38 40 42 52 63 83 104 125 146 167 188 208

2.4 2.4 3.6 4.8 6 7.1 8.3 9.5 11 12 14 17 18 19 21 24 26 29 31 33 36 38 40 43 45 48 60 71 95 119 143 167 190 214 238

55.5

50

47.6

41.7

Formula

Total Flow Rate of All Nozzles (L/min)

2

Formula

10 4

Table unit L/100 m

2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 22 24 26 28 30 32 34 36 38 40 42 44 46 48 50 52 54 56 58

2.5 2.5 3.8 5 6.3 7.5 8.8 10 11.3 12.5 15 17.5 18.8 20 23 25 28 30 33 35 38 40 43 45 48 50 63 75 100 125 150 175 200 225 250

2.7 2.7 4 5.4 6.7 8.1 9.4 10.8 12.1 13.5 16.2 18.9 20 22 24 27 30 32 35 38 40 43 46 49 51 54 67 81 108 135 162 189 216 243 270

2.8 2.8 4.2 5.6 7 8.4 9.8 11.2 12.6 14 16.8 19.6 21 22 25 28 31 34 36 39 42 45 48 50 53 56 70 84 112 140 168 196 224 252 280

2.9 2.9 4.4 5.8 7.3 8.7 10.2 11.6 13.1 14.5 17.4 20 22 23 26 29 32 35 38 41 44 46 49 52 55 58 73 87 116 145 174 203 232 261 290

3 3 4.5 6 7.5 9 10.5 12 13.5 15 18 21 23 24 27 30 33 36 39 42 45 48 51 54 57 60 75 90 120 150 180 210 240 270 300

3.1 3.1 4.7 6.2 7.8 9.3 10.9 12.4 14 15.5 18.6 22 23 25 28 31 34 37 40 43 47 50 53 56 59 62 78 93 124 155 186 217 248 279 310

3.2 3.2 4.8 6.4 8 9.6 11.2 12.8 14.4 16 19.2 22 24 26 29 32 35 38 42 45 48 51 54 58 61 64 80 96 128 160 192 224 256 288 320

3.3 3.3 5 6.7 8.3 10 11.7 13.3 15 16.7 20 23 25 27 30 33 37 40 43 47 50 53 57 60 63 67 83 100 133 167 200 233 266 300 333

3.5 3.5 5.3 7 8.8 10.5 12.3 14 15.8 17.5 21 25 26 28 32 35 39 42 46 49 53 56 60 63 67 70 88 105 140 175 210 245 280 315 350

3.6 3.6 5.4 7.2 9.0 10.8 12.6 14.4 16.2 18 22 25 27 29 32 36 40 43 47 50 54 58 61 65 68 72 90 108 144 180 216 252 288 324 360

4 4 6 8 10 12 14 16 18 20 24 28 30 32 36 40 44 48 52 56 60 64 68 72 76 80 100 120 160 200 240 280 320 360 400

4.5 4.5 6.8 9 11.3 13.5 15.8 18 20 23 27 32 34 36 41 45 50 54 59 63 68 72 77 81 86 90 113 135 180 225 270 315 360 405 450

5 5 7.5 10 12.5 15 17.5 20 23 25 30 35 38 40 45 50 55 60 65 70 75 80 85 90 95 100 125 150 200 250 300 350 400 450 500

5.5 5.5 8.3 11 13.8 16.5 19.3 22 25 28 33 39 41 44 50 55 61 66 72 77 83 88 94 99 105 110 138 165 220 275 330 385 440 495 550

40

37.0

35.7

34.5

33.3

32.3

31.3

30.3

28.6

27.8

25

22.2

20

18.2

L/100 m = L/ha ÷ 100 x rowspacing (m)

1

1.5

2

2.5

3

12 18 24 30 36 42 48 54 60 66 72 78 84 90 96 102 108 114 120 132 144 156 168 180 192 204 216 228 240 252 264 276 288 300 312 324 336 348

8 12 16 20 24 28 32 36 40 44 48 52 56 60 64 68 72 76 80 88 96 104 112 120 128 136 144 152 160 168 176 184 192 200 208 216 224 232

6 9 12 15 18 21 24 27 30 33 36 39 42 45 48 51 54 57 60 66 72 78 84 90 96 102 108 114 120 126 132 138 144 150 156 162 168 174

4.8 7.2 9.6 12 14.4 16.8 19.2 22 24 26 29 31 34 36 38 41 43 46 48 53 58 62 67 72 77 82 86 91 96 101 106 110 115 120 125 130 134 139

4 6 8 10 12 14 16 18 20 22 24 26 28 30 32 34 36 38 40 44 48 52 56 60 64 68 72 76 80 84 88 92 96 100 104 108 112 116

6 6 9 12 15 18 21 24 27 30 36 42 45 48 54 60 66 72 78 84 90 96 102 108 114 120 150 180 240 300 360 420 480 540 600

6.5 6.5 9.8 13 16.3 19.5 23 26 29 33 39 46 49 52 59 65 72 78 85 91 98 104 111 117 124 130 163 195 260 325 390 455 520 585 650

7 7 10.5 14 17.5 21 25 28 32 35 42 49 53 56 63 70 77 84 91 98 105 112 119 126 133 140 175 210 280 350 420 490 560 630 700

7.5 7.5 11.3 15 18.8 23 26 30 34 38 45 53 56 60 68 75 83 90 98 105 113 120 128 135 143 150 188 225 300 375 450 525 600 675 750

8 8 12 16 20 24 28 32 36 40 48 56 60 64 72 80 88 96 104 112 120 128 136 144 152 160 200 240 320 400 480 560 640 720 800

8.5 8.5 12.8 17 21 26 30 34 38 43 51 60 64 68 77 85 94 102 111 119 128 136 145 153 162 170 213 255 340 425 510 595 680 765 850

9 9 13.5 18 23 27 32 36 41 45 54 63 68 72 81 90 99 108 117 126 135 144 153 162 171 180 225 270 360 450 540 630 720 810 900

10 10 15 20 25 30 35 40 45 50 60 70 75 80 90 100 110 120 130 140 150 160 170 180 190 200 250 300 400 500 600 700 800 900 1000

16.7

15.4

14.3

13.3

12.5

11.8

11.1

10

L/ha = L/100 m x 100 ÷ rowspacing (m)

Table unit = L/100 m L/100 m ‹ — › L/min Travel Speed (km/h) Travel Speed (km/h) 3.5

4

4.5

5

5.5

6

6.5

7

8

9

10

3.4 5.1 6.9 8.6 10.3 12 13.7 15.4 17.1 19 21 22 24 26 27 29 31 33 34 38 41 45 48 51 55 58 62 65 69 72 75 79 82 86 89 93 96 99

3 4.5 6 7.5 9 10.5 12 13.5 15 17 18 20 21 23 24 26 27 29 30 33 36 39 42 45 48 51 54 57 60 63 66 69 72 75 78 81 84 87

2.7 4 5.3 6.7 8 9.3 10.7 12 13.3 14.7 16 17.3 18.7 20 21 23 24 25 27 29 32 35 37 40 43 45 48 51 53 56 59 61 64 67 69 72 75 77

2.4 3.6 4.8 6 7.2 8.4 9.6 10.8 12 13.2 14.4 15.6 16.8 18 19.2 20 22 23 24 26 29 31 34 36 38 41 43 46 48 50 53 55 58 60 62 65 67 70

2.2 3.3 4.4 5.5 6.5 7.6 8.7 9.8 10.9 12 13.1 14.2 15.3 16.4 17.5 18.5 19.6 21 22 24 26 28 31 33 35 37 39 41 44 46 48 50 52 55 57 59 61 63

2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 22 24 26 28 30 32 34 36 38 40 42 44 46 48 50 52 54 56 58

1.8 2.8 3.7 4.6 5.5 6.5 7.4 8.3 9.2 10.2 11.1 12 12.9 13.8 14.8 15.7 16.6 17.5 18.5 20 22 24 26 28 30 31 33 35 37 39 41 42 44 46 48 50 52 54

1.7 2.6 3.4 4.3 5.1 6 6.9 7.7 8.6 9.4 10.3 11.1 12 12.9 13.7 14.6 15.4 16.3 17.1 18.9 21 22 24 26 27 29 31 33 34 36 38 39 41 43 45 46 48 50

1.5 2.3 3 3.8 4.5 5.3 6 6.8 7.5 8.3 9 9.8 10.5 11.3 12 12.8 13.5 14.3 15 16.5 18 19.5 21 23 24 26 27 29 30 32 33 35 36 38 39 41 42 44

1.3 2 2.7 3.3 4 4.7 5.3 6 6.7 7.3 8 8.7 9.3 10 10.7 11.3 12 12.7 13.3 14.7 16 17.3 18.7 20 21 23 24 25 27 28 29 31 32 33 35 36 37 39

1.2 1.8 2.4 3 3.6 4.2 4.8 5.4 6 6.6 7.2 7.8 8.4 9 9.6 10.2 10.8 11.4 12 13.2 14.4 15.6 16.8 18 19.2 20 22 23 24 25 26 28 29 30 31 32 34 35

L/100 m = L/min x 6 ÷ speed

www.croplands.com.au

60 62 64 66 68 70 72 74 76 78 80 85 90 95 100 110 120 130 140 150 160 170 180 190 200 220 240 260 280 300 350 400 450 500 600 700 800 900

1

1.5

2

2.5

3

3.5

4

4.5

5

5.5

6

6.5

7

8

9

10

360 372 384 396 408 420 432 444 456 468 480 510 540 570 600 660 720 780 840 900 960 1020 1080 1140 1200 1320 1440 1560 1680 1800 2100 2400 2700 3000 3600 4200 4800 5400

240 248 256 264 272 280 288 296 304 312 320 340 360 380 400 440 480 520 560 600 640 680 720 760 800 880 960 1040 1120 1200 1400 1600 1800 2000 2400 2800 3200 3600

180 186 192 198 204 210 216 222 228 234 240 255 270 285 300 330 360 390 420 450 480 510 540 570 600 660 720 780 840 900 1050 1200 1350 1500 1800 2100 2400 2700

144 149 154 158 163 168 173 178 182 187 192 204 216 228 240 264 288 312 336 360 384 408 432 456 480 528 576 624 672 720 840 960 1080 1200 1440 1680 1920 2160

120 124 128 132 136 140 144 148 152 156 160 170 180 190 200 220 240 260 280 300 320 340 360 380 400 440 480 520 560 600 700 800 900 1000 1200 1400 1600 1800

103 106 110 113 117 120 123 127 130 134 137 146 154 163 171 189 206 223 240 257 274 291 309 326 343 377 411 446 480 514 600 686 771 857 1029 1200 1371 1543

90 93 96 99 102 105 108 111 114 117 120 128 135 143 150 165 180 195 210 225 240 255 270 285 300 330 360 390 420 450 525 600 675 750 900 1050 1200 1350

80 83 85 88 91 93 96 99 101 104 107 113 120 127 133 147 160 173 187 200 213 227 240 253 267 293 320 347 373 400 467 533 600 667 800 933 1067 1200

72 74 77 79 82 84 86 89 91 94 96 102 108 114 120 132 144 156 168 180 192 204 216 228 240 264 288 312 336 360 420 480 540 600 720 840 960 1080

65 68 70 72 74 76 79 81 83 85 87 93 98 104 109 120 131 142 153 164 175 185 196 207 218 240 262 284 305 327 382 436 491 545 655 764 873 982

60 62 64 66 68 70 72 74 76 78 80 85 90 95 100 110 120 130 140 150 160 170 180 190 200 220 240 260 280 300 350 400 450 500 600 700 800 900

55 57 59 61 63 65 66 68 70 72 74 78 83 88 92 102 111 120 129 138 148 157 166 175 185 203 222 240 258 277 323 369 415 462 554 646 738 831

51 53 55 57 58 60 62 63 65 67 69 73 77 81 86 94 103 111 120 129 137 146 154 163 171 189 206 223 240 257 300 343 386 429 514 600 686 771

45 47 48 50 51 53 54 56 57 59 60 64 68 71 75 83 90 98 105 113 120 128 135 143 150 165 180 195 210 225 263 300 338 375 450 525 600 675

40 41 43 44 45 47 48 49 51 52 53 57 60 63 67 73 80 87 93 100 107 113 120 127 133 147 160 173 187 200 233 267 300 333 400 467 533 600

36 37 38 40 41 42 43 44 46 47 48 51 54 57 60 66 72 78 84 90 96 102 108 114 120 132 144 156 168 180 210 240 270 300 360 420 480 540

L/min = L/100 m x speed ÷ 6

Photos are for illustrative purposes only. Prices and specifications are subject to change without notice. Prices effective January 2014. For indicative freight prices, see page 111.


Nozzles Section 4

3

Total Flow (L/min) ‹—› Single Nozzle Flow (L/min) To obtain single nozzle flow rates simply divide the Total Flow/min by the numbers of nozzles per row. For example, having 24 nozzles per row and spraying 36 L/min requires a nozzle size that delivers a flowrate1.5 L/min. Formula: Total output L/min = no of nozzles x single nozzle output • Single nozzle output = Total output ÷ no of nozzles

ALBUZ ATR Hollow Cone Flowrate chart

4 Bar

PRESSURE

L/min White

Lilac

Brown

Yellow

Orange

Red

Grey

Green

Black

5

0.27

0.36

0.48

0.73

0.99

1.38

1.5

1.78

2

Blue 2.45

6

0.29

0.39

0.52

0.8

1.08

1.51

1.63

1.94

2.18

2.67

7

0.32

0.42

0.56

0.86

1.17

1.62

1.76

2.09

2.35

2.87

8

0.34

0.45

0.6

0.92

1.24

1.73

1.87

2.22

2.5

3.06 3.24

9

0.36

0.48

0.64

0.97

1.32

1.83

1.98

2.35

2.64

10

0.38

0.5

0.67

1.03

1.39

1.92

2.08

2.47

2.78

3.4

11

0.39

0.52

0.7

1.07

1.45

2.01

2.17

2.58

2.9

3.56

12

0.41

0.55

0.73

1.12

1.51

2.09

2.26

2.69

3.03

3.71

13

0.43

0.57

0.76

1.17

1.57

2.17

2.35

2.79

3.14

3.85

14

0.44

0.59

0.79

1.21

1.63

2.25

2.43

2.89

3.26

3.99

15

0.46

0.61

0.81

1.25

1.69

2.33

2.51

2.99

3.36

4.12

16

0.47

0.63

0.84

1.29

1.74

2.4

2.59

3.08

3.47

4.25

17

0.48

0.64

0.86

1.33

1.79

2.47

2.67

3.17

3.57

4.37

18

0.5

0.66

0.89

1.37

1.84

2.54

2.74

3.25

3.67

4.49

19

0.51

0.68

0.91

1.4

1.89

2.6

2.81

3.34

3.76

4.61

20

0.52

0.7

0.93

1.44

1.94

2.67

2.88

3.42

3.85

4.72

ALBUZ Equivalent*

TVI

Purple 80–0050

Orange 80–01

Green 80–015

Yellow 80–02

Lilac 80–025

Blue 80–03

Blue 80–03

Red 80–04

Red 80–04

TeeJet Equivalent*

TX TXB80

TX-VK3

TX-VK4

TX-VK6

TX-VK8

TX-VK12

TX-VK18

TX-VK18

TX-VK18

TX-VK26

TX-VK26

TXB-050VK

TXB-067VK

TXB-01VK

TXB-015VK

TXB-02VK

TXB-03VK

TXB-03VK

TXB-03VK

TXB-04VK

TXB-04VK

Pink 80–0075

Note: Colours in table represent actual nozzle colour. ALBUZ TVI and TeeJet TXB80 nozzle range are ISO colour coded. Nozzles with the same colour have the same output. The ALBUZ ATR and TeeJet TX range are NOT ISO colour coded. Their nozzle colour is not related to a specific output.

Tree crop and vine nozzles NOZZLE

TYPE AND DESCRIPTION

ALBUZ ATR

• Hollow cone, 80° • 5–20 bar (optimum 10–15 bar) • Pink ceramic

GENERAL SPRAY SAMPLE ORDER SIZE RANGE, MATERIAL QUALITY FOR TYPE CODE SPRAY ANGLE

VF F

AZ-ATR-**- 80C

• **03 to 28 sizes • Ceramic • 80° spray angle (60° spray angle, some sizes)

$ (EX. GST)

11.30

PROD. CAT.

Z

Air-Induction Nozzles for Horticulture NOZZLE

TYPE AND DESCRIPTION

ALBUZ TVI

• TVI • Hollow cone 80°, high pressure air-induction • Drift reducing • 5–20 bar (optimum 10–16 bar)

Photos are for illustrative purposes only. Prices and specifications are subject to change without notice. Prices effective January 2014. For indicative freight prices, see page 111.

GENERAL SPRAY SAMPLE ORDER SIZE RANGE, MATERIAL QUALITY FOR TYPE CODE SPRAY ANGLE

C

AZ-TVI-02-80C

• 0050 to 05 sizes • Pink ceramic (3 components) • 80°

$ (EX. GST)

23.50

Optima BUYERS’ GUIDE – JANUARY 2014

PROD. CAT.

Z

10 5


Section 4

Nozzles

Nozzles – Discs and Cores NOZZLE

TYPE AND DESCRIPTION Disc and Core Jets: • Full and hollow cone spray patterns • Medium to fine droplets for use in air assisted situations • 5 to 20 bar recommended range

ORDER CODE

Type

SIZE RANGE, MATERIAL

$ (EX. GST)

PROD. CAT.

AZ-AD4

Disc

• 1 to 7 • Pink ceramic

8.50

Z

AZ-AC35

Core

• 13 to 56 • Pink ceramic

11.30

Z

FULL CONE

HOLLOW CONE

Disc and Core ALBUZ Ceramic – Flowrates

10 6

Disc SIZE

Core SIZE

Orifices Diameter

AD 1

AC 13

AD 2

AC 13

L/min

Angles

3 bar

4 bar

5 bar

6 bar

10 bar

15 bar

20 bar

10 bar

0.910

0.28

0.29

0.32

0.34

0.43

0.51

0.57

66°

20 bar 68°

1.180

0.32

0.37

0.40

0.42

0.52

0.63

0.67

74°

75°

AD 3

AC 13

1.385

0.36

0.41

0.43

0.48

0.60

0.71

0.74

77°

78°

AD 4

AC 13

1.810

0.47

0.52

0.58

0.60

0.74

0.91

1.00

84°

85°

AD 1

AC 23

0.910

0.28

0.30

0.35

0.38

0.48

0.55

0.61

63°

65°

AD 2

AC 23

1.180

0.39

0.48

0.50

0.56

0.71

0.83

0.93

72°

72°

AD 3

AC 23

1.385

0.47

0.52

0.58

0.64

0.78

0.95

1.04

77°

77°

AD 4

AC 23

1.810

0.59

0.71

0.76

0.81

1.04

1.26

1.41

88°

87°

AD 5

AC 23

2.310

0.71

0.82

0.90

0.99

1.27

1.50

1.71

96°

95°

AD 6

AC 23

2.770

0.83

0.97

1.04

1.13

1.45

1.78

2.01

100°

99°

AD 1

AC 25

0.910

0.40

0.45

0.50

0.55

0.69

0.83

0.95

49°

51°

AD 2

AC 25

1.180

0.63

0.71

0.79

0.88

1.08

1.34

1.53

61°

61°

AD 3

AC 25

1.385

0.75

0.86

0.94

1.02

1.30

1.58

1.79

69°

69°

AD 4

AC 25

1.810

1.14

1.30

1.44

1.59

2.01

2.45

2.79

82°

82°

AD 5

AC 25

2.310

1.36

1.56

1.73

1.91

2.42

2.96

3.35

85°

84°

AD 6

AC 25

2.770

1.74

2.01

2.23

2.47

3.16

3.83

4.43

89°

88°

AD 7

AC 25

3.230

2.05

2.34

2.63

2.86

3.85

4.66

5.10

92°

91°

AD 1

AC 45

0.910

0.49

0.55

0.61

0.67

0.84

1.01

1.15

39°

40°

AD 2

AC 45

1.180

0.79

0.93

1.01

1.13

1.41

1.74

1.97

58°

58°

AD 3

AC 45

1.385

0.91

1.04

1.19

1.27

1.84

2.01

2.31

62°

63°

AD 4

AC 45

1.810

1.42

1.60

1.80

1.98

2.53

3.08

3.54

73°

72°

AD 5

AC 45

2.310

1.78

2.05

2.31

2.51

3.20

3.91

4.54

76°

75°

AD 6

AC 45

2.770

2.29

2.68

2.99

3.28

4.28

5.25

6.10

80°

79°

AD 7

AC 45

3.230

2.68

3.13

3.50

3.92

5.02

6.20

7.22

86°

85°

AD 1

AC 46

0.910

0.57

0.66

0.74

0.81

1.04

1.26

1.45

17°

17°

AD 2

AC 46

1.180

1.07

1.23

1.33

1.48

1.86

2.25

2.53

20°

18°

AD 3

AC 46

1.385

1.26

1.45

1.62

1.80

2.27

2.76

3.20

23°

21°

AD 4

AC 46

1.810

2.21

2.53

2.81

3.11

3.98

4.85

5.86

32°

31°

AD 5

AC 46

2.310

3.04

3.50

3.96

4.41

5.58

6.83

7.93

41°

40°

AD 6

AC 46

2.770

4.34

5.02

5.69

6.11

8.04

9.87

11.39

49°

47°

AD 7

AC 46

3.230

5.49

6.40

7.10

7.84

10.16

12.43

14.33

55°

53°

AD 1

AC 31

0.910

0.92

1.10

1.25

39°

39°

AD 2

AC 31

1.180

1.41

1.69

1.92

87°

95°

1.80

AD 3

AC 31

1.385

1.50

AD 1

AC 35

0.910

0.92

2.05

65°

62°

1.25

34°

40°

AD 2

AC 35

1.180

1.58

1.90

2.16

39°

39°

AD 3

AC 35

1.385

2.20

2.64

3.00

44°

42°

AD 4

AC 35

1.810

3.58

4.30

4.89

77°

72°

AD 5

AC 35

2.310

2.60

3.00

3.30

3.60

4.51

5.41

6.16

37°

34°

AD 2

AC 56

1.180

0.98

1.10

1.20

1.40

1.52

1.82

2.07

21°

20°

AD 3

AC 56

1.385

1.30

1.60

1.70

1.90

2.05

2.46

2.80

28°

32°

AD 4

AC 56

1.810

2.20

2.50

2.80

3.10

3.52

4.23

4.81

35°

38°

AD 5

AC 56

2.310

3.00

3.50

3.90

4.30

5.96

7.15

8.14

43°

40°

AD 6

AC 56

2.770

4.50

5.30

5.90

6.50

8.78

10.54

12.00

56°

49°

AD 7

AC 56

3.230

6.00

6.90

7.70

8.50

11.80

14.17

16.20

68°

64°

www.croplands.com.au

Photos are for illustrative purposes only. Prices and specifications are subject to change without notice. Prices effective January 2014. For indicative freight prices, see page 111.


Nozzles Section 4

The appearance of a spray cloud interacting with the canopy does not provide accurate indications about coverage achieved in the canopy. More often than not the perception of the human eye is not even close to the real coverage achieved. For example, the plumes of high volume applications will generally look reassuringly better than the hardly visible plumes from low volume applications. Yet, coverage with the lower volume is often equivalent or even better. Hard to cover surfaces may not allow deposition and what looks superficially like an effective plume may not translate into actual coverage. Therefore, for any realistic assessment of spray coverage it becomes imperative to create some unbiased standard with the help of spray indicators!

Water Sensitive Paper Water sensitive paper has the advantage that it is very easy to handle (but watch out for moisture) and store (used and unused) which make it an ideal tool for documentation. It can be assessed straight after the application and like clay, it is excellent to be incorporated into the work flow of the set-up. It provides only a small snapshot of the canopy target and great care needs to be taken to produce a representative standard when placing the papers into the canopy. As a rule of thumb, if three out of ten papers show inadequate coverage the set-up needs improvement.

Clay Markers Their main use pattern is to protect fruits and leaves from sun burn. By far the most visible residues are produced by Surround which makes it an excellent product for the assessment of coverage. Spraying with Surround provides the advantage to see coverage over the entire canopy as a whole as well as in detail. Uneven banding or shading in the canopy can be picked up very effectively. Surround is the best method to demonstrate excessive run-off. An assessment can be carried out soon after application, once the clay marker has dried. The sprayer can be modified according to shortcomings. This continuous workflow makes working on the set-up very effective. A good visual spray indicator rate is 1.25kg/100 litre Dilute Volume. If a concentrate spray volume is used the x-factor rules must be applied.

Fluorescent Dye The glow of fluorescent dye in the light of a fluorescent torch under dark conditions can be quite spectacular. Even the tiniest droplets show up. The observer needs a fluorescent torch. Assessments are normally carried out in the night which makes it difficult to change setups on the go. Alternatively, leaves and fruits can be picked after application and observed in a darkroom during the day.

ORDER CODE

DESCRIPTION

L-M1111

1 litre Fluoro Dye

110.00

X

L-M1115

5 litre Fluoro Dye

440.00

X

20301-1

Water sensitive paper 76 x 26mm (3” x 1”) pack 50

85.95

Z

20301-2

Water sensitive paper 76 x 52mm (3” x 2”) pack 50

124.09

Z

Photos are for illustrative purposes only. Prices and specifications are subject to change without notice. Prices effective January 2014. For indicative freight prices, see page 111.

$ (EX. GST)

Optima BUYERS’ GUIDE – JANUARY 2014

PROD. CAT.

107


Section 4

Nozzle Packs

Packs of Nozzles, Caps and nozzle filters

Purchasing nozzles in quantities can make you some savings and provide ideal opportunities for display. Our most popular packs are listed below

10 8

ORDER CODE

DESCRIPTION (STANDARD MODELS)

PR10-TDAM

AirMix® nozzles, size 015 – pack of 10

110.00

Z

PR11-TDAM

AirMix® nozzles, size 02 – pack of 10

110.00

Z

PR12-TDAM

AirMix® nozzles, size 03 – pack of 10

110.00

Z

PR13-TDAM

AirMix® nozzles, size 04 – pack of 10

110.00

Z

PR14-TDAM

AirMix® nozzles, size 025 – pack of 10

110.00

Z

PR10-TDAM100

AirMix® nozzles, size 015 – pack of 10

1,050.00

Z

PR11-TDAM100

AirMix® nozzles, size 02 – pack of 10

1,050.00

Z

PR12-TDAM100

AirMix® nozzles, size 03 – pack of 10

1,050.00

Z

PR13-TDAM100

AirMix® nozzles, size 04 – pack of 10

1,050.00

Z

PR14-TDAM100

AirMix® nozzles, size 025 – pack of 10

1,050.00

Z

PR20-1

25612 Nozzle caps with seals – Black – pack of 10

20.50

Z

PR20-3

25612 Nozzle caps with seals – Red – pack of 10

20.50

Z

PR20-4

25612 Nozzle caps with seals – Blue – pack of 10

20.50

Z

PR20-5

25612 Nozzle caps with seals – Green – pack of 10

20.50

Z

PR20-6

25612 Nozzle caps with seals – Yellow – pack of 10

20.50

Z

PR20-10

25612 Nozzle caps with seals – Lilac – pack of 10

20.50

Z

PR20H-1

23306H Nozzle caps with seals to suit Hardi nozzle bodies – Black – pack of 10

24.07

Z

PRTTI-015

TeeJet Turbo Teejet AI nozzles size 015 – pack of 10

129.00

Z

PRTTI-02

TeeJet Turbo Teejet AI nozzles size 02 – pack of 10

129.00

Z

PRTTI-025

TeeJet Turbo Teejet AI nozzles size 025 – pack of 10

129.00

Z

PRTTI-03

TeeJet Turbo Teejet AI nozzles size 03 – pack of 10

129.00

Z

PRTTI-04

TeeJet Turbo Teejet AI nozzles size 04 – pack of 10

129.00

Z

PRTT-02

Turbo TeeJet nozzles size 02 – pack of 10

120.00

Z

PRTT-025

Turbo TeeJet nozzles size 025 – pack of 10

120.00

Z

PRTT-03

Turbo TeeJet nozzles size 03 – pack of 10

120.00

Z

PR10

XR TeeJet nozzles size 015 – pack of 10

48.13

Z

PR11

XR TeeJet nozzles size 02 – pack of 10

48.13

Z

PR12

XR TeeJet nozzles size 03 – pack of 10

48.13

Z

PR13

XR TeeJet nozzles size 04 – pack of 10

48.13

Z

PR14

XR TeeJet nozzles size 025 – pack of 10

48.13

Z

PR15

XR TeeJet nozzles size 05 – pack of 10

48.13

Z

www.croplands.com.au

$ (EX. GST)

PROD. CAT.

Photos are for illustrative purposes only. Prices and specifications are subject to change without notice. Prices effective January 2014. For indicative freight prices, see page 111.


 Section 4

Spraying Equipment Specialists Croplands manufacture and import quality spray equipment, components and accessories. UNDERSTANDING SPRAYERS

Croplands has been building sprayers since 1972. After operating for 40 years in the Australian and New Zealand environments we understand what the pressing problems are; before, during and after application. Our sprayers are built accordingly. We listen to farmers and produce cost effective solutions to suit their needs.

SIMPLE, RELIABLE AND DURABLE Our machinery is built to high quality standards. Robust design and generous dimensions result in unmatched durability. Working with feedback from armers and operators, we develop sprayers that provide efficiency with a simple approach. To name just one example, our evolved central control areas make filling, flushing, chemical mixing and induction an easy process.

THE APPLICATION SPECIALIST At Croplands we believe it is not good enough to simply sell a piece of machinery. We believe it is important to give advice to growers on how to achieve the best possible outcome with their unit. How many other manufacturers can confidently give tailored recommendations on nozzle selection?

SUPPORT AND SERVICE Our service centres are staffed by experienced and internationally trained technicians who understand what makes your sprayer tick. Croplands’ dealer network is trained to provide the very best local support. With dealers and warehouses located around the country spare parts and accessories are always available and close by.


Section 4

Terms and conditions

1. DEFINITION ‘Seller’ means Croplands Equipment Pty Ltd. ‘Buyer’ means the addressee specified on documents or invoices subject to this contract issued by the Seller. ‘Goods’ means any item of whatsoever nature which is sold by the Seller. ‘Terms’ means these Terms and Conditions of Sale. All quotations are made and all orders are accepted subject to the following conditions. No other conditions contained in an order of the Buyer or otherwise shall form part of the contract or any variation thereof unless expressly accepted by the Seller in writing. The placement of an order with the Seller by the Buyer constitutes an unqualified acceptance and agreement of these Terms by the Buyer. Buyer and Seller agree that if these terms conflict with any other document, agreement or arrangement, these Terms shall prevail to the extent of the inconsistency. 2. BUYER’S STATUTORY RIGHTS These conditions of sale shall not exclude, limit, restrict or modify the rights, entitlements and remedies conferred upon the Buyer or the liabilities imposed upon the Seller, by any condition or warranty implied, by the commonwealth, state or territory act or ordinance, rendering void or prohibiting such exclusion, limitation, restriction or modification. Our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to replacement or refund for a major failure and for compensation for any other reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure. 3. WARRANTIES Subject to Clause 2 above, (a) The Seller warrants that the goods supplied shall be of merchantable quality. All goods are supplied subject to this warranty only and any liability arising out of or in respect of the supply, resupply, use or reuse whether singly or otherwise of these goods, whatsoever arising and whether for consequential loss or otherwise and including any liability the Seller may otherwise have had by virtue of any representation, warranty, condition or term whether express or implied by law is hereby excluded to the extent permitted under the Competition and Consumer Act 2010. (b) Any liability incurred by the Seller to the Buyer is limited to the replacement or repair of the goods or (at the option of the Seller) refund of the price paid by the Buyer, for a period of 12 months from the date of sale, provided the goods have not been damaged through misuse or handling and in particular does not extend to consequential loss. (c) To make a claim under this warranty, the Buyer can contact the Seller through the Dealer portal website www.croplands.com.au or call 1300 650 724, or contact their Territory Manager listed on the www.croplands.com.au/pages/contact.html website. The Buyer should specify the full particulars of such claim and wherever possible return a sufficient part of the Goods to enable a proper examination by the Seller. 4. ADVICE Subject to Clause 2, any advice, recommendation, information, assistance or service provided by the Seller in relation to Goods sold or manufactured by it or their use or application is given in good faith and is believed by Seller to be appropriate and reliable and is provided without liability or responsibility on the part of the Seller. This clause also applies to product specifications and analyses which may from time to time be required to be provided to the Buyer from the Seller. 5. DELIVERY The Seller will make all reasonable efforts to have the goods delivered to the Buyer on the date agreed between the parties (‘Delivery Date’) but the Seller shall be under no liability whatsoever should delivery not be made on this date. Unless otherwise specified, delivery of all Goods shall be made at the nearest convenient unloading point (either road or rail) to the Buyer’s address and the Buyer shall be responsible for unloading vehicles or containers and transportation to factory or store.

110

6. DAMAGE IN TRANSIT All Goods shall be examined by the Buyer on delivery. The Seller shall not be liable for claims in respect of shortage or damage in transit unless the carrier and the Seller are notified in writing within 7 days of delivery – or in the case of non delivery, notice being given in writing within 7 days of notice of despatch of the goods from the works of the Seller or its subcontractors. 7. RISK The assessment of the suitability of the goods offered by the Seller for use by the Buyer, either in a process or incorporation in a product, is the sole responsibility of the Buyer irrespective of any information verbal or written given to the Buyer by the Seller. The Buyer assumes all risks and liabilities for consequences arising from the use of Goods from the Delivery Date, whether singly or in combination with other products and indemnifies the Seller in respect of any such use. 8. RESERVATION OF TITLE (a) Property in the Goods shall remain with the Seller and the Seller reserves the right to dispose of the Goods until such time as: (i) full payments made for all amounts owing by the Buyer to the Seller so that the Buyer’s total indebtedness to the Seller under these Conditions of Sale is discharged; or (ii) the Buyer sells the goods to his customers in the ordinary course of business. (b) lf the Buyer fails to pay any amount of the Buyers total indebtedness to the Seller under these Conditions of Sale when it is due to the Seller or, in event of default as specified in this subclause occurs, the Seller may without notice and without prejudice to any of its other rights and remedies recover and/or re-sell the Goods or any of them and may enter upon the Buyers premises by its servants or agents for that purpose. (c) The Buyer acknowledges that until his total indebtedness under these Conditions of Sale to the Seller is discharged, the Buyer holds the Goods as bailee of the Seller and that a fiduciary relationship exists between them. (d) ln the event of sale of the Goods to its customers, the Buyer in its position as a fiduciary shall account to the Seller for the proceeds of the sale (unless and until the Buyer’s total indebtedness to the Seller under these Terms is discharged). 9. PERSONAL PROPERTIES SECURITY ACT 2009 (PPSA) (a) In this Clause 9, unless otherwise defined in these Terms, capitalised expressions have the meaning given to them in the PPSA. (b) Buyer acknowledges and agrees that by entering into a contract of sale under these Terms, Buyer grants a Security Interest to the Supplier in the Goods and any proceeds of sale in respect to those Goods and also consents to the Seller registering any one or more Financing Statements or Financing Change Statements in respect to any such Security Interest created by or contemplated by these Terms. (c) Buyer and Seller agree for the purposes of satisfying s20(1)(iii) of the PPSA, that the description of Goods as shown on any invoice from the Seller is the subject of each and any Security Interest created under these terms and such and every invoice is incorporated into these Terms. (d) Buyer agrees that it is the Grantor and Seller is the holder of a Purchase Money Security Interest (PMSI) by virtue of these Terms or the PPSA. (e) Buyer agrees that the following provisions of the PPSA will not apply to these Terms: Sections 95, 96, 125, 129, 130, 132(3)(d), 132(4), 135, 142 and 143. (f) Unless otherwise agreed in writing with the Seller, the Buyer waives its rights to receive a verification statement in accordance with s157 of the PPSA. (g) For the purposes of s275(6) of the PPSA, Buyer and Seller agree that neither party will, or is entitled to, disclose information of the kind specified in s275(1) of the PPSA. (h) Buyer agrees with the Seller that it will not enter into any agreement or arrangement which permits any other person to register any Security Interest in respect to unpaid Goods, proceeds of sale of unpaid Goods or any accounts owed in respect of the

www.croplands.com.au

unpaid Goods without the suppliers consent. (i) Buyer agrees to give Seller at least 10 days prior written notice before changing any of its corporate details, such as its name, ABN or ACN, or principle place of business. (j) Buyer agrees it shall unconditionally ratify any actions taken by the Seller under this Clause 9. (k) Buyer agrees to reimburse Seller for all costs and/ or expenses incurred or payable by the Seller in relation to registering, maintaining or releasing any Financing Statement or Financing Change Statement under these terms. (l) This Clause 9 will survive the termination of the contract for sale and purchase of Goods between the Buyer and Seller to the extent permitted by law. 10. PRICE The price shall be the price ruling at the Delivery Date unless otherwise agreed in writing. Any price indications or price lists are subject to alteration to price ruling at the Delivery Date. 11. FORCEMAJEURE Deliveries may be totally or partially suspended by the Seller during any period in which the Seller may be prevented or hindered from making delivery through any circumstances outside its reasonable control, including but not limited to strikes, lockouts, raw material shortages, accidents or breakdowns of plant or machinery. The Seller shall not be under any liability in respect of such suspension and in particular the Seller shall be under no obligation to deliver at any future date any Goods not delivered during the period of suspension. 12. PAYMENT AND DEFAULT Unless otherwise agreed expressly in writing the terms of payment shall be 30 days, following the end of the month of delivery. If the Buyer makes default in any payment or commits any act of bankruptcy or being an incorporated company, passes a resolution for winding up (except for the purpose of reconstruction) or a petition is presented for its winding up, the Seller may without prejudice to its own rights either suspend further deliveries, require payment in advance for all such deliveries or terminate any contract forthwith by written notice to the Buyer. Where the payment is to be made from places outside of Australia, the normal method of payment shall be a confirmed irrevocable bank letter of credit designated in Australian Dollars from a bank approved by the Seller guaranteeing full settlement to an agreed bank payable on presentation of the documents. 13. DEBT COLLECTION COST If the Buyer makes default in payment, which necessitates debt collection costs to be incurred by the Seller, these debt collection costs will be passed onto the Buyer, and shall be recouped by the Seller at such time as the recovery of outstanding debt takes place. 14. FUTURE DEALING Unless otherwise agreed to in writing by the Seller and not withstanding any terms appearing in documentation provided by or on behalf of the Buyer the terms appearing herein shall be incorporated by implication into all agreements by the Seller to supply the Buyer with goods. 15. CANCELLATION Cancellation will only be accepted by the Seller on condition that all costs and expenses and all loss of profits and other loss or damage sustained by the Seller (as to which the certificate of the auditor of the Seller shall be conclusive) will be reimbursed by the Buyer to the Seller forthwith. 16. AUSTRALIAN LAW This contract shall be construed in accordance with Australian law and shall be subject to the jurisdiction of the Australian courts. 17. NOTICES Any notice given to the Buyer shall be deemed to be given upon its being posted or sent by facsimile/email to the address of the Buyer set out in documents and invoices. 18. RESERVATION OF RIGHTS Notwithstanding anything else in these Terms, any exercise or attempted exercise, of any enforcement right by the Seller under these Terms does not prejudice or limit, in any respect, any other rights or remedies of the Seller arising at law or in equity.

Photos are for illustrative purposes only. Prices and specifications are subject to change without notice. Prices effective January 2014. For indicative freight prices, see page 111.


Section 4

Freight policy

»» The following tables detail freight on items listed in the 2013 Optima Buyers’ Guide. »» These prices may change at any time without notice. These freight charges will apply unless items are ordered that qualify to be included in a stock order. »» Goods can be sent by your choice of carrier and/or arranged for pick-up, or sent freight forward if we are advised at the time of order. Shipped by

SIZE (MM)

to North Island $ (EX. GST)

to South Island $ (EX. GST)

Small parts, fittings, nuts/tails, nozzles, discs and cores

Courier bag E11

225 x 115

3.50

3.50

Small filters, pump diaphragms, valves

Courier bag E20

260 x 190

4.50

4.50

Small lids, large filters, solenoids, ball valves etc

Courier bag E40

325 x 235

6.00

6.00

Large lids, large filters, spray guards, spray guns etc

Courier bag E60

415 x 360

7.00

7.00

Charged at our freight cost

Charged at our freight cost

Spare parts and components Any value

Larger spare parts Axles, hubs and stubs, framework etc

Suitable transport

n/a

Larger components and Optima goods Value under $500 ex. GST retail 20L foam marker (single item)

Ticket

21.00

21.00

25L buckets

Ticket

8.50

17.00

5L foam marker (single item)

Ticket

8.50

17.00

5L jugs

Courier bag item or ticket item (size dependant)

5.00

8.50

AR regulators* under $500 ex. GST retail

Courier bag item or ticket item (size dependant)

5.00

8.50

AR regulators* over $500 ex. GST retail

Courier bag item or ticket item (size dependant)

F.I.S.

F.I.S.

Flojet pumps

Courier bag item or ticket item (size dependant)

5.00

8.50

Hose reels

Ticket

21.00

21.00

Knapsacks (single item)

Ticket

8.50

17.00

Pakman vests (rolled up)

Ticket

5.00

8.50

Rolls of spray hose

Ticket

8.50

17.00

Spray lances

Ticket

5.00

8.50

F.I.S.

F.I.S.

F.I.S.

F.I.S.

Charged by pallet space

Charged by pallet space

Optima equipment – wholegoods Value over $500 ex. GST retail

CropPaks, diaphragm pumps, linkage units, auto rate controllers, trailing units, diesel units,large hose reels, Kasco respirators, QuikSpray units, spray booms, GPS units, foam markers

Franchise equipment All linkage, Quantum Mist sprayers and broadacre units

Truck/Toll/Translink

Spray tanks Freight charged according to size

Toll/Translink

Multiple Buys 5L foam marker – 8 or more

Toll/Translink or similar carrier

F.I.S.

F.I.S.

20L foam marker – 4 or more

Toll/Translink or similar carrier

F.I.S.

F.I.S.

Flojet pumps – 3 or more

Toll/Translink or similar carrier

F.I.S.

F.I.S.

Knapsacks – 3 or more

Toll/Translink or similar carrier

F.I.S.

F.I.S.

Measuring jugs – 5 or more

Toll/Translink or similar carrier

F.I.S.

F.I.S.

F.I.S.

F.I.S.*

Stock orders of parts and Optima goods* *Stock orders must have minimum 15 lines, with dealer NETT value of $2,000 ex. GST “Stock orders” refers to parts and components (not wholegoods).

Photos are for illustrative purposes only. Prices and specifications are subject to change without notice. Prices effective January 2014. For indicative freight prices, see page 111.

Optima BUYERS’ GUIDE – JANUARY 2014

111


NATIONWIDE DEALER LISTING

North Island, Upper Greg Small�����������������0276 879 010 North Island, Lower Vic Barlow������������������0274 752 322 South Island Rob Marshall�������������� 0272 486 822 General Manager, Australasia Sean Mulvaney�������+61 409 911 544 Sales Manager, Australasia Anthony Maley������ +61 409 899 491 Customer Support Manager, Australasia Gary Armour���������� +61 409 911 950 Nozzle Specialist, Australasia Jorg Kitt���������������� +61 429 939 403

Contact your local dealer or Croplands New Zealand Freecall������������� 0800 106 898 Freefax�������������� 0800 117 711 sales@croplands.com.au Croplands Head Office 50 Cavan Road Dry Creek SA 5094 Australia Tel����������������������� +61 8 8359 9300 Fax����������������������� +61 8 8349 6175 Technical Service �����������������������������+61 8 8359 9333 Your Croplands dealer

NATIONAL DISTRIBUTORS PGG Wrightson Stores – Nationwide, contact your local store Fruitfed Supplies Stores – Nationwide, contact your local store North Island Auckland Bethlehem Dargaville Gisborne Hamilton Hastings Hastings Katikati Kumeu Masterton Morrinsville New Plymouth Opotiki Paeroa Palmerston North Palmerston North Pukekohe Pukekohe Rotorua Rotorua Stratford Taupo Te Aroha Te Awamutu Te Puke Waipukurau Wakatane Warkworth Wellington Whangarei Whangarei

Pacific Growers Supplies Bethlehem Motors Kaipara Agri Centre Cervus Equipment Waikato Tractors Calnan Spray-quip Services Cervus Equipment Katikati Tractors & Auto M.E & A.L Mannington Wairarapa Machinery Services C B Norwood Dist C B Norwood Dist Opotiki Engineering & Hardware Piako Tractors Cervus Equipment Hogan Spray Pump And Equipment Essential Spray Products Norwood Farm Machinery Centre Cervus Equipment Piako Tractors Cervus Equipment Taupo Tractor & Machinery Te Aroha Tractors & Machinery C B Norwood Splash Direct Cervus Equipment Jacks Machinery Splash Water Specialists Spraying Equipment Specialist Cervus Equipment Power Farming Northland

09 573 5775 07 576 4799 09 439 6544 06 869 0153 07 843 7237 06 879 5720 06 879 9907 07 549 0330 09 412 8927 06 377 3009 07 889 8505 06 757 5582 07 315 6285 07 862 9064 06 363 0060 06 356 5218 021 0200 8040 09 237 0104 07 345 5490 07 345 8560 06 765 5690 07 378 4533 07 884 9901 07 872 0232 07 5736138 06 858 8822 07 308 7299 09 425 9100 04 478 2258 09 438 7228 09 438 9163

South Island Ashburton Christchurch Cromwell Gore Mosgiel Mosgiel Oamaru Renwick Richmond Timaru

Johnson Gluyas Tractors Noble Adams Machinery C R Motors Advance Agriculture Agrispray & Equipment J J North Otago Ag-Centre Marlborough Tractor Services Tasman Sprayer Solutions Johnson Gluyas Tractors

03 307 8330 03 349 7862 03 445 1844 03 203 9100 03 489 6268 03 489 8199 03 433 1214 03 572 8787 02 7442 8661 03 688 1133

Croplands are national distributors of the Quikspray range of high quality self-retracting reels and complete sprayer kits. For more information see your local dealer.

Top quality AND Excellent reliability

ALGO/CLE2398

CROPLANDS SALES REPRESENTATIVES

Croplands | Optima Buyers Guide | NZ  
Read more
Read more
Similar to
Popular now
Just for you