7. Function list
Function group 2 LED
Parameter
Min/Max
display
name
range
Description
Factory
Adjustable
defaults
during run
1
O
5-5
nOn
-
11-4
H0
[Jump code]
1/95
This parameter sets the code number to jump.
H1
[Fault history 1]
-
§
H2
[Fault history 2]
-
types of faults, the frequency, the current and
nOn
-
H3
[Fault history 3]
-
the Accel/Decel condition at the time of fault.
nOn
-
H4
[Fault history 4]
-
nOn
-
nOn
-
0
O
5.0
X
0.0
X
0
X
10.0
X
15.0
X
20.0
X
25.0
X
30.0
X
H5
[Fault history 5]
-
H6
[Reset fault
0/1
§
The last fault is automatically stored in the H 1- [Fault history 1].
§
history] H7
This parameter stores information on the
This parameter clears the fault history
Page
saved in H 1-5.
[Dwell
F23/400
frequency]
[Hz]
§
When run frequency is issued, motor starts
10-5
to accelerate after dwell frequency is applied to the motor during H8- [Dwell time]. §
[Dwell frequency] can be set within the range of F21- [Max frequency] and F23- [Start frequency].
H8
[Dwell time]
0/10 [sec]
§
This parameter sets the time for dwell operation.
H10
[Skip
0/1
This parameter sets the frequency range to
frequency
skip to prevent undesirable resonance and
select]
vibration on the structure of the machine.
H11
[Skip
0/400
1)
frequency low
[Hz]
limit 1] H12
§
§
Run frequency cannot be set within the range of H11 thru H16.
§
The frequency values of the low numbered
[Skip
parameters cannot be set above those of the
frequency high
high numbered ones.
limit 1] H13
[Skip frequency low limit 2]
H14
[Skip frequency high limit 2]
H15
[Skip frequency low limit 3]
7-8
SV-iC5
9-20