5. Programming keypad
How to monitor Motor rpm in Drive group when the motor is rotating in 1730 rpm.
Drive group
-. Present run frequency can be monitored in the first code of Function group 1. The 1
preset frequency is 57.6Hz. -. Continue pressing the Up (p) /Down (q) key until rPM is displayed.
2
3
4
5
-. Motor rpm can be monitored in this code. -. Press the Prog/Ent (˜) key once. -. Last three digits 730 in 1730 rpm is shown on the LED. -. Press the Left (t) key once. -. First three digits 173 in 1730 rpm are shown on the LED. -. Press the Prog/Ent (˜) key once. -. Return to the rPM code.
5-11
SV-iC5