Page 1

High and Low Frequency Radio Frequency Identification Systems (RFID)

Highlights • High and low frequency systems networkable on ContriNet Low-frequency system • All-metal housings, IP 68 and IP 69K • Food safe and saltwater resistant (316L/V4A) • VHT tags for very high temperatures, up to 180°C (356°F) • All tags embeddable in metal High-frequency system • ISO/IEC 15693 compatible • VHT tags for very high temperatures, embeddable in metal • UHT tags for ultra high temperatures, up to 250°C (482°F)


INTRODUCTION At a glance

ü Technology leading manufacturer of inductive and photoelectric sensors as well as Safety and RFID systems ü World market leader for miniature sensors, sensors with long operating distance and devices for particularly demanding operating conditions ü Represented in over 60 countries worldwide, headquarters in Switzerland ü 14 own subsidiaries in all major markets ü More than 500 employees worldwide

Contrinex Headquarters, Switzerland

RFID systems

RFID (Radio Frequency IDentification) is used in numerous automation and logistics domains. It allows objects to be identified by means of electronic labels (transponders or tags). Compared to classic systems, such as bar codes or laser marking, RFID technology offers important advantages. Transponder information can be read or written even when there is no direct line of vision between it and the Read/Write Module. In addition, information can be added, modified or replaced. It is a useful technology for automated production, reducing human error while increasing reliability, flexibility and traceability. ConIdent® is the general name of the Contrinex RFID system, including transponders, Read/Write Modules and interfaces in both low frequency (LF) and high frequency (HF) technology. ContriNet is the name of the Contrinex RFID network. This network is particularly user friendly since it allows the connection of LF and/or HF Read/Write Modules in the same network, reducing the number of interfaces. ContriNet is an RS485 network with a specific Contrinex protocol. An RFID system always has the structure illustrated on page 3. LOW FREQUENCY (LF) RFID (31.25 kHz) Contrinex LF RFID technology features not only conventional components, but also a range of allmetal Read/Write Modules and transponders in stainless steel. These devices are particularly suitable for difficult operating environments where they will be exposed to cleaning, harsh chemicals, water and frost. They are highly resistant to mechanical shocks. − − − − −

2

Reads and writes through metal Works in a metallic environment Works in harsh environments Non-standard technology Very high temperature tags (VHT 180°C / 356°F) embeddable in metal

Detailed data sheets for these products can be found on the Contrinex website:


HIGH FREQUENCY (HF) RFID (13.56 MHz) Contrinex HF RFID technology complies with ISO/IEC 15693 and is therefore open to any components that meet this standard. HF systems allow fast communication between transponders and Read/Write Modules as well as extended functionality for tag data protection. − ISO/IEC 15693 − Ultra high temperature tags (UHT 250°C / 482°F) − Very high temperature tags (VHT 180°C / 356°F) embeddable in metal RFID COMPONENTS

Transponders (or tags): A transponder is an electronic label that stores data. Transponder memory includes a unique preset number as an identifier and a writeable zone specific to the object. Writeable data may include, for example, the object’s history or the parameters of operations to which it will be subjected. • Read/Write Modules (RWMs): A Read/Write Module is a device that allows data to be written to or read from a transponder. • Interface: The interface connects the Read/Write Modules to an industrial fieldbus.

FIELDBUS

INTERFACE

READ/WRITE MODULES

Controller

RLSS

RLS-1118

Communication between the RWM and any tags is provided by the modulation of a carrier. The frequency indicated for any RFID system is the frequency of its carrier.

WWW.CONTRINEX.COM

3


ApPLICATIONS Washing stations In the harsh environment of a washing station, RFID transponders and Read/Write Modules are exposed to hot water, mechanical shocks, corrosive chemicals and high-pressure jetting. Despite these challenges, identification systems must operate continuously with high reliability. Typically, RFID tags are mounted on the part carriers. On arrival at the washing station, information from the tag is used to select the correct washing cycle for the part type and process.

ConIdent® advantages ConID passive tags require no power source and minimal maintenance. Rugged, low frequency tags with all-metal housings are sealed to IP 67 or IP 69K to resist water penetration and can withstand temperatures up to 180°C (+356°F). Their extended sensing range reduces the risk of mechanical damage. Read/write units interface directly with customer control systems.

Machine tools The presence under pressure of lubricating and cooling fluids, combined with metal particles, makes the machine tool environment particularly difficult. Identification components must resist fluid penetration to prevent downtime and ensure the reliability of data. An industrial network of Read/Write Modules, interfaces and tags forms a complete RFID system to control the path of each workpiece through all machining cycles, programming and logging every step.

ConIdent® advantages All-metal, low-frequency tags and Read/Write Modules are resistant to corrosion, impact and abrasion. For use in the harshest environments, laser welded tags are fully sealed and can be embedded in metal. They function reliably in water, withstand high pressure cleaning and resist aggressive solvents. Tags are optimized for operating temperatures from -40 to +180°C (-40 to +356°F) and have a protection rating of IP 68 and IP 69K. Read/Write Modules are not influenced by the presence of metal particles.

4

Detailed data sheets for these products can be found on the Contrinex website:


Testing lines Product testing lines may comprise several test stations, each performing a fixed sequence of tests. For efficient diagnosis, identification systems must integrate well into the overall control system. In a typical RFID system, part carriers are equipped with tags and every test station has a Read/Write Module (RWM). To program the testing machine, the RWM reads from each tag the type of test required for an individual part. After each test, the RWM writes the results back into the appropriate tag memory. Test reports are automatically forwarded to the controller for product acceptance or rejection and fault correction.

ConIdent® advantages The Contrinex HF RFID system includes numerous interfaces for integration into control systems. The structure is extremely simple, with just one master for all Read/Write Modules. Direct connection to an RS485 bus is possible. ConID HF software allows RFID components to be tested using an ordinary PC. System stability and EMC characteristics are very good.

Paint shops Identification components in paint shops are exposed to a variety of rinsing, coating and burning operations, including electrophoresis. Since soiling makes visual identification difficult or impossible, rugged RFID systems are an excellent solution. The RFID tag accompanies each product throughout all processes. It can store individual data, including customer requirements, directly on the product or carrier. This allows for highly automated, customized processes with smaller batches and central data storage.

ConIdent® advantages The high-frequency system includes specially adapted, high-temperature tags with IP68/IP69K protection. Their silicone-free composition makes them ideal for paint-shop applications. They are resistant to various detergents and can be read/ written directly on leaving the high temperature zone (cooling not required): − Tag RTP-0263-020, for embedded or nonembedded mounting in metal; Ø 26 mm (1.02”), temperature resistant up to 180°C (356°F) − Tag RTP-0502-022, non-embeddable; Ø 50 mm (1.97”), temperature resistant up to 250°C (482°F).

WWW.CONTRINEX.COM

5


6

Detailed data sheets for these products can be found on the Contrinex website:


transponders

10-21

ContriNet

22-35

USB Read/Write Modules

36-41

handheld devices

42-45

Accessories

46-53

software

54-57

Starter kits

58-61

WWW.CONTRINEX.COM

7


program overview Low Frequency

High frequency

Transponders

12 - 17

18 - 21

Read/Write Modules

26 - 27

27

Interfaces:

28 - 32

28 - 32

PROFIBUS-DP

28

28

DeviceNet

29

29

EtherNet/IP / PROFInet IO

29

29

EtherCat / POWERLINK

29

29

TCP/IP industrial interfaces

31 - 32

31 - 32

USB Adaptor

33 - 34

33 - 34

usb r/w modules

USB Read/Write Modules

38

38 - 39

handheld devices

Handheld devices

44

45

Demonstration software

56

56

Tree View

56

56

Working area / Captured packets

57

57

Starter kits

60

60

Transponders

contrinet

software

starter kits

8

Detailed data sheets for these products can be found on the Contrinex website:


transponder overview LOW FREQUENCY TRANSPONDERS (PASSIVE) Transponder

Mounting

Material

Characteristics

Page

RTM / RTF Ø 10 - Ø 26 M16 - M30

Embeddable or non-embeddable

Stainless steel V2A

-40 ... +80°C (-40 to +176°F)

14-15

Stainless steel V4A

-40 ... +125°C or +180°C (-40 ... +257°F or +356°F) IP 68 & IP 69K Food safe Corrosion resistant

16-17

PBTP glass-fiber reinforced

-40 ... +125°C (-40 to +257°F) IP 68 & IP 69K Food safe Corrosion resistant Insensitive to soiling

13

RTL Ø 10 - Ø 26 M16 - M30

RTP Ø 20 - Ø 50

Embeddable

Embeddable

high FREQUENCY TRANSPONDERS (PASSIVE) Transponder RTP Ø 20 - Ø 50

RTP Ø9

Mounting

Material

Characteristics

Page

Non-embeddable

PBTP glass-fiber reinforced

-25 ... +85°C (-13 to +185°F) IP 67 Compatible with ISO/IEC 15693 Insensitive to soiling

19

PPS and epoxy

-25 ... +85°C (-13 to +185°F) IP 67 Compatible with ISO/IEC 15693 Insensitive to soiling

20

LCP

-25 ... +250°C (-13 to +482°F) IP 68 & IP 69K Compatible with ISO/IEC 15693 Insensitive to soiling

21

PPS

-25 ... +180°C (-13 to +356°F) IP 68 & IP 69K Compatible with ISO/IEC 15693 Insensitive to soiling

20

Non-embeddable

RTP Ø 50

Non-embeddable

RTP Ø 26

Embeddable mounting in metal

WWW.CONTRINEX.COM

9


10

Detailed data sheets for these products can be found on the Contrinex website:


TRANSPONDERS FOR ALL ENVIRONMENTS

transponders low frequency high frequency

KEY ADVANTAGES ü Passive (no battery) ü LF and HF can be used in same application LF ü Stainless steel tags (transponders) for harsh environments ü Insensitive to soiling ü Food safe and saltwater resistant tags, IP 69K ü Tags readable/writeable through metal HF ü Compatible with ISO/IEC 15693 ü Insensitive to soiling ü Tags for temperatures up to 250°C (482°F) ü PPS tags that can be embedded in metal, IP 69K

WWW.CONTRINEX.COM

11


low frequency Plastic

structure of memory

Housing size max. read/write distance mm

Technical DATA Compatible IC type

EM4056

Read/write memory

240 byte

Read only memory

12 byte

127 126 125 124 123 122 121 120

Byte 1

LSB Byte 0

Password Configuration

2 blocks

Blocks protection

Blocks

User memory 120 blocks 240 bytes

128 blocks

007 006 005 004 003 002 001 000

120 blocks

3 blocks

Laser ROM (Unique Identifier)

3 blocks

DATA Housing material

16 bit

2 bit

Mounting Ambient temperature range

Various tag memory protection possibilities are provided, including password protection and OTP write protection of data blocks.

12

Detailed data sheets for these products can be found on the Contrinex website:

Weight Part reference


transponders Ø 20

Ø 30

Ø 50

28

29

41

Ø50

Ø30

Ø5 Ø5

3.2 ± 0.1

3.2 ± 0.1

3.2 ± 0.1

Ø20

PBTP glass-fiber reinforced

PBTP glass-fiber reinforced

PBTP glass-fiber reinforced

Embeddable

Embeddable

Embeddable

-40 ... +125°C / -40 … +257°F

-40 ... +125°C / -40 … +257°F

-40 ... +125°C / -40 … +257°F

1.3 g

2.3 g

5.7 g

RTP-0201-000

RTP-0301-000

RTP-0501-000

WWW.CONTRINEX.COM

13


low frequency stainless steel V2A Housing size mm

Ø 10

Ø 16

Ø 26

17

19

27

max. read/write distance mm

Ø16

Ø10

Ø26

sensing face sensing face sensing face

6

7

4,5

Ø5,3

Ø11

sensing face sensing face

sensing face

DATA Housing material Mounting Ambient temperature range Weight Part reference

14

Stainless steel V2A

Stainless steel V2A

Stainless steel V2A

Embeddable

Embeddable

Embeddable

-40 ... +80°C / -40 … +176°F

-40 ... +80°C / -40 … +176°F

-40 ... +80°C / -40 … +176°F

1.1 g

2.7 g

7.0 g

RTM-0100-000

RTM-0160-000

RTM-0260-000

Detailed data sheets for these products can be found on the Contrinex website:


transponders M16

M30

M30

13

18

23

Ø 26,7

Ø 2,1 Ø 3,1

sensing face

M30x1,5

35,5

3

16

10,5

12,2

sensing face

sensing face

M30x1,5

5

2,2

M16x1

sensing face

5 5

24,4

SW 36

sensing face

Ø 27,5 sensing face

Stainless steel V2A

Stainless steel V2A

Stainless steel V2A

Embeddable

Embeddable

Non-embeddable

-40 ... +80°C / -40 … +176°F

-40 ... +80°C / -40 … +176°F

-40 ... +80°C / -40 … +176°F

6.9 g

31.4 g

98.7 g

RTM-2160-000

RTM-2300-000

RTF-1300-000

WWW.CONTRINEX.COM

15


low frequency stainless steel V4A, laser welded Housing size mm

Ø 10

Ø 16

Ø 26

17

19

27

max. read/write distance mm

Ø16

Ø10

Ø26

sensing face sensing face sensing face

6

7

4,5

Ø5,3

Ø11

sensing face sensing face

sensing face

DATA Housing material Mounting Ambient temperature range Weight Part reference

16

Stainless steel V4A

Stainless steel V4A

Stainless steel V4A

Embeddable

Embeddable

Embeddable

-40 ... +125°C / -40 … +257°F

-40 ... +125°C / -40 … +257°F

-40 ... +125°C / -40 … +257°F

1.5 g

3.3 g

12.5 g

RTL-0102-001

RTL-0162-001

RTL-0262-001

Detailed data sheets for these products can be found on the Contrinex website:


transponders Ø 26

M16

M30

M30

27

13

18

23

Ø26

Ø 26,7

Ø 2,1 Ø 3,1

sensing face

sensing face

M16x1

sensing face

2,2

Ø5,3

M30x1,5

35,5

5

3

12,2

16

sensing face

24,4

5 5

sensing face

SW 36

Ø11

10,5

6

M30x1,5

sensing face

sensing face

Ø 27,5 sensing face

Stainless steel V4A

Stainless steel V4A

Stainless steel V4A

Stainless steel V4A

Embeddable

Embeddable

Embeddable

Non-embeddable

-40 ... +180°C / -40 … +356°F

-40 ... +125°C / -40 … +257°F

-40 ... +125°C / -40 … +257°F

-40 ... +125°C / -40 … +257°F

12.5 g

7.9 g

33.1 g

44.1 g

RTL-0262-003

RTL-2162-001

RTL-2302-001

RTL-1302-001

WWW.CONTRINEX.COM

17


high frequency Plastic

structure of memory

Housing size mm max. read/write distance mm

Technical DATA Compatible IC type

SL2 ICS53 l.Code SLI-S

Read/write memory

160 byte

Read only memory

96 byte

Standard

Pages

9

8

2

1

0

-1

-5

-6

ISO/IEC 15693

Blocks

MSB Byte 3

Byte 2

Byte 1

LSB Byte 0

39 38 37 36 35 34 33 32

11 10 09 08 07 06 05 04 03 02 01 00 -01 -02 -03 -04

-17 -18 -19 -20 -21 -22 -23 -24

40 blocks User memory

User memory 40 blocks 160 bytes

24 blocks Configuration

DATA Housing material Mounting

Various tag memory protection possibilities are provided, including password protection and OTP write protection of data blocks.

18

Detailed data sheets for these products can be found on the Contrinex website:

Ambient temperature range Weight Part reference


transponders Ø 20

Ø 30

Ø 50

26

36

47

Ø20

Ø30 Ø50

Ø5

3.2

3.0

3.0

Ø5

PBTP glass-fiber reinforced

PBTP glass-fiber reinforced

PBTP glass-fiber reinforced

Non-embeddable

Non-embeddable

Non-embeddable

-25 ... +85°C / -13 … +185°F

-25 ... +85°C / -13 … +185°F

-25 ... +85°C / -13 … +185°F

1.3 g

2.7 g

6.6 g

RTP-0201-020

RTP-0301-020

RTP-0501-020

WWW.CONTRINEX.COM

19


high frequency Housing size max. read/write distance mm

plastic

plastic embeddable in metal

Ø9

Ø 26

16

34

Ø9

2.2

Ø5 Ø11 sensing face

Ø26

6.0 Ø11 sensing face

DATA Housing material Mounting Ambient temperature range Weight Part reference

20

PPS + Epoxy

PPS, silicone free

Non-embeddable

Embeddable

-40 ... +85°C / -40 … +185°F

-25 ... +180°C / -13 … +356°F

0.25 g

3.3 g

RTP-0090-020

RTP-0263-020

Detailed data sheets for these products can be found on the Contrinex website:


transponders Plastic ultra high temperature Ø 50 60

Ø5 Ø11

Ø50

5.2 Ø11 sensing face

LCP (Liquid Crystal Polymer), silicone free Non-embeddable -25 ... +250°C / -13 … +482°F 16.9 g RTP-0502-022

WWW.CONTRINEX.COM

21


22

Detailed data sheets for these products can be found on the Contrinex website:


the contrinex network

contrinet low frequency high frequency

KEY ADVANTAGES ü Powerful RS485 network for LF and HF systems ü Threaded Read/Write Modules (RWMs) with S12 connector and RS485 output ü LF and HF RWMs can be mixed on the same network ü Rugged all-metal RWMs with impervious sensing face ü High-temperature RWMs for up to +125°C (257°F) ü Interfaces for most industrial fieldbuses and USB

WWW.CONTRINEX.COM

23


contrinet

RLLS--133000-00

2

RLS-1118

6789

1

2345

2345

RLS--13303--0220

2

2

RLSS

0

0

1

6789

contrinet: the contrinex network

2

ContriNet is the RFID network of Contrinex. It is an RS485 physical network with a specific Contrinex protocol. Full documentation is provided. ContriNet allows LF and/or HF Read/Write Modules to be connected in series: − Up to 10 with one USB interface − Up to 31 with one industrial bus interface − Up to 254 on a half-duplex RS485 interface While the usual interfaces allow connection of a limited number of Read/Write Modules, the ContriNet network can be used to reduce the number of interfaces, which makes the ConID system more economic. In principle, a ContriNet network can extend to a length of 200 m.

24

Detailed data sheets for these products can be found on the Contrinex website:


low frequency RLS-1180-030

RLS-1300-030

RLS-1181-030

RLS-1301-030

Smax

Do

Smax

Do

Smax

Do

Smax

Do

RTP-0201-000

7.7

14.0

4.5

22.2

25.4

28.8

28.0

32.3

RTP-0301-000

11.9

23.2

12.2

26.2

25.9

32.6

28.7

36.5

RTP-0501-000

7.4

59.1

7.8

47.8

36.3

49.3

40.7

52.2

RTM-0100-000

8.4

13.0

8.6

19.0

16.5

12.6

13.4

20.7

RTM-0160-000

10.7

15.9

12.1

21.6

17.1

21.1

18.7

25.7

RTM-0260-000

12.5

22.2

12.9

23.8

22.6

28.6

26.1

21.9

RTM-2160-000

6.3

8.6

12.5

16.0

12.5

20.4

RTM-2300-000

8.6

15.4

4.4

26.5

15.6

19.9

18.0

22.6

RTF-1300-000

11.9

20.4

12.4

22.8

20.7

26.6

22.8

29.8

high frequency RLS-1183-020

RLS-1303-020

Smax

Do

Smax

Do

RTP-0201-020

14

19

26

31

RTP-0301-020

29

34

36

41

RTP-0501-020

24

46

47

54

RTP-0090-020

9

13

16

22

RTP-0263-020

22

26

34

37

RTP-0502-020

42

50

60

65

Working area

Read/Write Module

Transponder

D0 RLLS--133011-00

x

y

S0 Smax

WWW.CONTRINEX.COM

25


contrinet low frequency Read/Write Module

max. read/write distance mm

M18

M30

M18

12

13

37

M18x1

M18x1

M30x1,5

5

10

SW 36

63,5

63,5

4

SW 24

M12x1

Ø 16,4

8

Ø 27,5

LED

M12x1

8

(4x)

11

LED

13,5

(4x)

8

8

11

13,5

(4x)

11

LED

8

8

Ø 16,4

13,5

63,5

5

4

SW 24

10

Ø 26,7

10

Housing size

M12x1

DATA Housing material Max. current consumption

Stainless steel V2A

PBTP / chrome-plated brass

30 mA

30 mA

30 mA

Non-embeddable

Non-embeddable

Non-embeddable

Ambient temperature range

-25…+80°C / -13…+176°F

-25…+80°C / -13…+176°F

-25…+80°C / -13…+176°F

Storage temperature range

-25…+80°C / -13…+176°F

-25…+80°C / -13…+176°F

Connector S12

Connector S12

Connector S12

37 g

127 g

37 g

RLS-1180-030

RLS-1300-030

RLS-1181-030

Mounting

Connection type Weight (incl. nuts) Part reference

26

Stainless steel V2A

Detailed data sheets for these products can be found on the Contrinex website:


contrinet High frequency Read/Write Module M30

M18

M30

41

42

60

M30x1,5

M30x1,5

5

73,5

6789

73,5

63,5

10

10 4

SW 24

10 5

SW 36

0

1

2345

10.5

LED

Ø 27,5

(4x)

M12x1

PBTP / chrome-plated brass

PBTP / Stainless steel V2A

LED 8

11

13,5

8

M12x1

11

(4x)

13,5

8

11

Ø 16,4

LED

8

Ø 27,5

8 13,5

SW 36

M18x1

(4x)

M12x1

PBTP / Stainless steel V2A

30 mA

60 mA

60 mA

Non-embeddable

Non-embeddable

Non-embeddable

-25…+80°C / -13…+176°F

-25…+80°C / -13…+176°F

-25…+80°C / -13…+176°F

Connector S12

Connector S12

Connector S12

127 g

37 g

95 g

RLS-1301-030

RLS-1183-020

RLS-1303-020

WWW.CONTRINEX.COM

27


contrinet CONTRINET INTERFACES 100 x 52 x 64

Housing size mm FIELDBUS

PROFIBUS-DP

AT a glance

8.4

Compact, ready-to-use device Allows connection of ContriNet to an industrial fieldbus Synthetic housing in ABS Mounting on rail DIN EN 60715

24V

9

5.5

901

APL SYS

109

7 8

100

x1 DIAG

®

RS-232 RS-422

COM

RS-485

EtherNet/IP RIS-1053-320

X3

X2

RIS-1053-520

EtherCAT RIS-1053-620

38

PROFInet IO

x10

2 3 901

MMC

2 3

7 8

PROFIBUS-DP RIS-1053-120

ADR

456

RIS-1053-120

25.5

X1

fieldbus DeviceNet RIS-1053-220

GND

456

− − − −

64

POWERLINK RIS-1053-820 52

firmware

12.2

15.5

On SD card Selectable using the RIS-1053-X20 card configurator software

DATA Housing material Mounting Ambient temperature range

0 … +50°C / +32 … +122°F

Storage temperature range

0 … +50°C / +32 … +122°F

Weight Part reference

28

ABS DIN rail EN 60715

Detailed data sheets for these products can be found on the Contrinex website:

150 g RIS-1053-120

8.4


devicenet

ethernet/IP / profinet io ethercat / powerlink

8.4

9

5.5

901 901

APL SYS

7 8

109

P R O F

I

®

INDUSTRIAL ETHERNET

N E T

x10

2 3 456

100

EtherNet/IP

TM

7 8

MMC

2 3 456

RIS-1053-220

25.5

X1 ADR

APL SYS

100 x 52 x 64

APL SYS

100 x 52 x 64

DeviceNet

x1 DIAG

RS-232

TM

MS

SF

NS

BF

RS-422

MNS

X3

38

1 2 3 4 5

APL SYS

X2

APL SYS

RS-485

®

ETHERNET

POWERLINK

52

15.5

12.2

8.4

RUN

BS

ERR

BE

ABS

ABS

DIN rail EN 60715

DIN rail EN 60715

0 … +50°C / +32 … +122°F

0 … +50°C / +32 … +122°F

0 … +50°C / +32 … +122°F

0 … +50°C / +32 … +122°F

150 g

150 g

RIS-1053-220

RIS-1053-E20

WWW.CONTRINEX.COM

29


contrinet contrinet application with interfaces Up to 31 Read/Write Modules

0

1

Interfaces

RLLS--133000-00

6789

Industrial fieldbus 2345

RLS--13303--0220

24V 2

2

X1 ADR 901

456

x10

7 8 2 3

456

901

MMC

2 3

7 8

APL SYS

x1 DIAG

RS-232

S12-2MVG-010-NNRN-D9FG

RS-422

COM

RS-485

X3

2

X2

200 m maximum

V12-5TPD-000-NN1 24V S12-2FVG-010-NNRN

accessories to connect interfaces to contrinet

S12 male

S12-2MVG-010-NNRN-D9FG

DB-9M female 4 (B) 5 4 3 2 1

9 8 7 6

1 (V+)

S12 male 3 (GND)

2 (A) S12 male S12 female

S12-2FVG-010-NNRN 2

2

blue GND brown 24V

S12 female 3 (GND)

1 (24V)

S12 female

V12-5TPD-000-NN1

4

*Other cables available page 49

data

30

S12-2MVG-010-NNRN-D9FG

S12 - DB9 RIS HF PVC 1 m

S12-2FVG-010-NNRN

24V - S12 power supply cable

V12-5TPD-000-NN1

S12 T-connector

S12-4MNG-000-NNT2

S12 male connector

S12-4FNG-000-NNT2

S12 female connector

S12-5MNG-000-NNRN-120W

S12 ContriNet terminator 120 W

Detailed data sheets for these products can be found on the Contrinex website:

S12-5MNG-000-NNRN-120W


TCP/IP industrial interface

GND AC In AC/DC+ In Backup DC+ In

Ethernet Serial Server

RIS-1613-400

Voltage Range: 9-48VDC 8-24VAC

Link

Ready

Power

Reset

OFF

2

Run DB9

613853 A

Console Terminal

Default IP: 192.168.0.1 Console Mode: Baud rate 9600, 8-N-1 Ethernet Pin 1 2

RS-232 RS-422 RS-485 half-duplex DCD RXDB(-) RXD RXDA(+)

3 4 5 6

TXD DTR GND DSR

TXDA(+) TXDB(-) GND CTSB(-)

7 8 9

RTS CTS RI

RTSA(+) CTSA(+) RTSB(-)

DATA A(+) DATA B(-) GND

RS-485 full-duplex RXDB(-) RXDA(+) TXDA(+) TXDB(-) GND

#1

RX

DB9 MALE

TX RS-232/422&485

1

D

GN X-

S/T

CT

1

X+

/T

TX X+

/R

RX

TM

S RT X-

/R

Ethernet Serial Server

RIS-1613-400

accessories to connect Tcp/ip interface to contrinet

S12 male

S12-2MVG-010-NNR2-D9FG

DB-9M female 4 (B) 5 4 3 2 1

9 8 7 6

1 (V+)

S12 male 3 (GND)

2 (A) S12 male S12 female

S12-5MNG-000-NNRN-120W

S12-2FVG-010-NNRN 2

2

blue GND brown 24V

S12 female 3 (GND)

1 (24V)

S12 female

V12-5TPD-000-NN1

4

data S12-2MVG-010-NNR2-D9FG

DB9 - S12 cable

S12-2FVG-010-NNRN

24V - S12 power supply cable

V12-5TPD-000-NN1

S12 T-connector

S12-5MNG-000-NNRN-120W

S12 ContriNet terminator 120 W

WWW.CONTRINEX.COM

31


contrinet application with connector miniconnect

1

2345

6789

0

0

1

0V

6789

Up to 31 Read/Write Modules Maximum length = 200 m

2345

GND AC In RLLS--133000-00

24VDC

RLS-1118

RLS--13303--0220

AC/DC+ In Backup DC+ In

2

2

Ready

Power

Reset

ETHERNET

OFF

Run DB9

Console Terminal

2

TCP or UDP protocol

Ethernet

RX

TX RS-232/422&485

1

D

GN X-

S/T

CT

1

X+

/T

TX X+

/R

RX X-

/R

S RT

RIS-1613-400 Miniconnect

application with connector DB-9M

0V

GND AC In

24V

AC/DC+ In Backup DC+ In

Voltage Range: 9-48VDC 8-24VAC

Link

Ready

Power

S12-2FVG-010-NNRN

Reset

V12-5TPD-000-NN1

OFF

Run DB9

2

ETHERNET

Console Terminal

TCP or UDP protocol

Ethernet

RX

TX RS-232/422&485

2

1

D

GN X-

S/T

CT

1

X+

/T

TX -

X X+ /R TS/R R

RX

RIS-1613-400 DB-9M

32

S12-2MVG-010-NNR2-D9FG

Detailed data sheets for these products can be found on the Contrinex website:

2

Voltage Range: 9-48VDC 8-24VAC

Link


usb ADAPTOR 67 x 66 x 28

Housing size mm At a Glance − Synthetic ABS housing − Serial RS485 connection to ContriNet − USB connection to control PC

RS485 +24V

LEDs

USB Adaptor HF RAS-6766-020

Red LED:

603664 A

+24V

Describes the connection control PC - USB

RAS-6766-020

connector. Green LED: Indicates that the device is fed by an

24V

external power supply unit. The set contains: 1 USB adaptor, 1 power supply, 1 USB cable

16

34

16

Ø14

USB Adaptor HF RAS-6766-020

67.5

84

RS485 +24V

603664 A

+24V

66

28

DATA Housing material

ABS

Power supply

24 V

Max. current consumption Connection (RS485 side)

625 mA Connector S12

Ambient temperature range

0 … +50°C / +32 … +122°F (with external power supply unit)

Storage temperature range

-40 … +85°C / -40 … +185°F

Weight Part reference

67 g RAS-6766-020

WWW.CONTRINEX.COM

33


contrinet application with usb adaptor

IEC 320 - C14

0

1

ConID HF/LF DEMO Software ConID HF/LF.dll ConID_DRV_XF

RLLS--133000-00

6789

Up to 10 Read/Write Modules

2345

RLS--13303--0220

2

2

RAS-6766-020

+24V

USB

RS485 +24V

USB Adaptor HF RAS-6766-020

24V

603664 A

200 m maximum

Connection The adaptor acts as the interface between a network of Read/Write Modules and the USB port of the control PC. The delivery package includes a USB cable.

External power supply unit An external power supply unit (24V / 15W, 625 mA) is included in the delivery package.

Drivers and software Drivers (ConID Driver XX) compatible with the various Windows versions and software for demonstration and training use (ConID HF/LF) can be downloaded from the Contrinex website.

34

Detailed data sheets for these products can be found on the Contrinex website:


WWW.CONTRINEX.COM

35


36

Detailed data sheets for these products can be found on the Contrinex website:


PRACTICAL CONNECTION POSSIBILITIES

usb r/w modules low frequency high frequency

KEY ADVANTAGES ü Direct connection of Read/Write Module (RWM) to PC ü Compatible with ConID LF/HF DEMO software ü LF and HF types in sizes M18 and M30

WWW.CONTRINEX.COM

37


usb r/w modules low frequency usb Read/Write Module Housing size max. read/write distance mm

M18

M30

28

38

RLS-1301-230

RLS-1181-230

M30x1.5

M18x1

10

10

50

50 5

4

CONTRINEX RLS-1301-230

2000

Ø5

SW36

2000

CONTRINEX RLS-1181-230

SW24

LED

LED

Ø5

DATA Housing material Max. current consumption

PBTP / chrome-plated brass

200 mA

200 mA

Non-embeddable

Non-embeddable

Ambient temperature range

-25 ... +80°C / -13 … +176°F

-25 ... +80°C / -13 … +176°F

Storage temperature range

-25 ... +80°C / -13 … +176°F

-25 ... +80°C / -13 … +176°F

USB A male

USB A male

107 g

144 g

RLS-1181-230

RLS-1301-230

Mounting

Connection type Weight (incl. nuts) Part reference

38

PBTP / chrome-plated brass

Detailed data sheets for these products can be found on the Contrinex website:


high frequency usb Read/Write Module M18

M18

M30

M30

35

35

50

50

RLS-1301-220

RLS-1301-220-120

RLS-1181-220

RLS-1181-220-120

M18x1

M30x1.5

M18x1

M30x1.5

10

10

10

10

35

35

50

5

50

4

5

4 2000

LED

Ø5 Ø5

PBTP / chrome-plated brass

2000

Ø5

CONTRINEX RLS-1301-220

LED

LED

SW36

CONTRINEX RLS-1301-220-120

SW36

2000

CONTRINEX RLS-1181-220

2000

SW24

CONTRINEX RLS-1181-220-120

SW24

LED

PBTP / chrome-plated brass

Ø5

PBTP / chrome-plated brass

PBTP / chrome-plated brass

200 mA

200 mA

200 mA

200 mA

Non-embeddable

Non-embeddable

Non-embeddable

Non-embeddable

-25 ... +70°C / -13 … +158°F

-25 ... +70°C / -13 … +158°F

-25 ... +70°C / -13 … +158°F

-25 ... +70°C / -13 … +158°F

-25 ... +70°C / -13 … +158°F

-25 ... +70°C / -13 … +158°F

-25 ... +70°C / -13 … +158°F

-25 ... +70°C / -13 … +158°F

USB A male

USB A male

USB A male

USB A male

97 g

107 g

144 g

165 g

RLS-1181-220-120

RLS-1181-220

RLS-1301-220-120

RLS-1301-220

WWW.CONTRINEX.COM

39


APPLICATION WITH usb Read/Write Module

ConID HF DEMO Software ConID HF.dll RWM USB Driver

The default address of USB Read/Write Modules is 254. USB Read/Write Modules are not compatible with ContriNet but they have the same firmware. In particular, they are compatible with DEMO program ConID HF/LF.

40

Detailed data sheets for these products can be found on the Contrinex website:


WWW.CONTRINEX.COM

41


42

Detailed data sheets for these products can be found on the Contrinex website:


ON-SITE checks MADE EASY

Handheld devices low frequency high frequency

KEY ADVANTAGES ü Rugged industrial device with docking station ü Demo programs for all basic operations ü ConID LF and ConID HF software ü Operating system of HF version: Windows Mobile 6.1 ü Integrated barcode scanner with HF version

WWW.CONTRINEX.COM

43


handheld devices 155 x 75 x 49 mm (with docking station)

RPA-0101-000 / RPA-0102-000 RPA-0110-000

READ

A A/N

ON OFF

C

DEL

MEM

D

E

F

G

7

8

9

/

H

I

J

K

B

5

6

L

M

N

1

2

3

P

Q

R

0

.

=

4

O S +

T

U

V

W

MENU

TIME

DATE

MSG

X

Y

Z

$

%

:

SP

RPA-0111-000 / RPA-0112-000

The handheld LF read/write device may be used for writing to and reading ConID transponders. Its most important features are as follows: − − − − − − − − − −

Portable and light No connector Robust and ergonomic housing Simple navigation Integrated RFID Read/Write Module Alphanumeric LC display with 16 characters 34 alphanumeric and function keys Integrated clock and calendar Belt clip 128 KB memory

The handheld read/write device features a NiMH battery pack, which charges automatically when positioned on its docking station. The latter enables the read/write device to communicate by means of an RS232 interface.

data

44

RPA-0111-000

Handheld read/write device with docking station with EU adapter

RPA-0110-000

Handheld read/write device without docking station

RPA-0101-000

Docking station with EU adapter

RPA-0112-000

Handheld read/write device with docking station with US adapter

RPA-0102-000

Docking station with US adapter

Detailed data sheets for these products can be found on the Contrinex website:


170 x 79 x 40 mm (With docking station)

RPA-0213-120

1 @:/

2 ABC

4 GHI

5 JKL

3 DEF 6 MNO

7PQRS

8 TUV

9 WXYZ



0 .,?!

#

Fn

The handheld HF read/write system (RPA-0213-120) consists of a handheld read/write device with Bluetooth, docking station with USB interface and extra battery. − − − − − − − − −

Portable and light Robust and ergonomic housing Integrated RFID Read/Write Module RFID HF 13.56 MHz 1D and 2D barcode reader Integrated clock and calendar The docking base-station is used to recharge the handheld read/write device and to recharge an extra battery Communication between the handheld read/write device and a computer is via USB or Bluetooth ConID HF Handheld software provides status, write and read operations and enables creation of an instruction list

data RPA-0213-120

Handheld read/write device with docking station

WWW.CONTRINEX.COM

45


46

Detailed data sheets for these products can be found on the Contrinex website:


Accessories low frequency high frequency

LF accessories ü Cables ü RFID couplers ü Cables for RFID couplers HF accessories ü Standard cables ü Quick-lock cables

WWW.CONTRINEX.COM

47


accessories shielded cables

Part reference

48

Type

Cable

Length

S12-4FUG-020-NWRN-12MG

Socket straight / plug straight

PUR

2m

S12-4FUG-050-NWRN-12MG

Socket straight / plug straight

PUR

5m

Detailed data sheets for these products can be found on the Contrinex website:


Standard cables

Part reference

Type

Cable

Length

S12-4FVG-006-12MG

Socket straight / plug straight

PVC

0.6 m

S12-4FVG-020-12MG

Socket straight / plug straight

PVC

2m

S12-4FVG-050-12MG

Socket straight / plug straight

PVC

5m

S12-4FUG-006-12MG

Socket straight / plug straight

PUR

0.6 m

S12-4FUG-020-12MG

Socket straight / plug straight

PUR

2m

S12-4FUG-050-12MG

Socket straight / plug straight

PUR

5m

Type

Cable

Length

S12-4FVG-003-NNNQ-12MG

Socket straight / plug straight

PVC

0.3 m

S12-4FVG-006-NNNQ-12MG

Socket straight / plug straight

PVC

0.6 m

S12-4FVG-010-NNNQ-12MG

Socket straight / plug straight

PVC

1m

S12-4FVG-015-NNNQ-12MG

Socket straight / plug straight

PVC

1.5 m

S12-4FVG-020-NNNQ-12MG

Socket straight / plug straight

PVC

2m

S12-4FVW-003-NNNQ-12MG

Socket right angle / plug straight

PVC

0.3 m

S12-4FVW-006-NNNQ-12MG

Socket right angle / plug straight

PVC

0.6 m

S12-4FVW-010-NNNQ-12MG

Socket right angle / plug straight

PVC

1m

S12-4FVW-015-NNNQ-12MG

Socket right angle / plug straight

PVC

1.5 m

S12-4FVW-020-NNNQ-12MG

Socket right angle / plug straight

PVC

2m

S12-4FUG-003-NNNQ-12MG

Socket straight / plug straight

PUR

0.3 m

S12-4FUG-006-NNNQ-12MG

Socket straight / plug straight

PUR

0.6 m

S12-4FUG-010-NNNQ-12MG

Socket straight / plug straight

PUR

1m

S12-4FUG-015-NNNQ-12MG

Socket straight / plug straight

PUR

1.5 m

S12-4FUG-020-NNNQ-12MG

Socket straight / plug straight

PUR

2m

S12-4FUW-003-NNNQ-12MG

Socket right angle / plug straight

PUR

0.3 m

S12-4FUW-006-NNNQ-12MG

Socket right angle / plug straight

PUR

0.6 m

S12-4FUW-010-NNNQ-12MG

Socket right angle / plug straight

PUR

1m

S12-4FUW-015-NNNQ-12MG

Socket right angle / plug straight

PUR

1.5 m

S12-4FUW-020-NNNQ-12MG

Socket right angle / plug straight

PUR

2m

Quick-lock cables

Part reference

WWW.CONTRINEX.COM

49


accessories RFID Couplers At a glance − − − −

Metal threaded cylindrical housings Sensing face of PBTP (polybutylene terephthalate) or stainless steel V2A Insensitive to dirt Passive (without power supply)

Housing size

An RFID coupler consists of two coupling heads linked by a cable. It is passive and enables data to be transferred between the Read/Write Module and the transponder, acting as a contact-free extension for data transfer. A coupler is used whenever a double mechanical interface is required.

Connection The coupling heads feature 4-pole S12 connectors. The cable connectors have been designed specifically for use with RFID couplers and are equipped with 4-pole sockets at both ends.

The coupling heads must not be connected to the power supply, nor to an interface device.

d2

transponder transponder coupling head

L

RCS--133011-00

cable

DATA Housing material

RCS--133011-00

RWM coupling head d1

Sensing face material

Read/Write Module (RWM)

Mounting Ambient temperature range Storage temperature range

RLLS--133000-00

Connection type Degree of protection Weight (with nuts) Part reference

50

Detailed data sheets for these products can be found on the Contrinex website:


M18

M30

M18

M30

Coupling head

Coupling head

Coupling head

Coupling head

10

Ø 26,7

M30x1,5

M12x1

63,5

5 8

8

8

M12x1

Ø 27,5

13,5

8 13,5

8 M12x1

Ø 16,4

SW 36

63,5

4

63,5

SW 36

Ø 27,5

13,5

8

8

Ø 16,4

13,5

8

63,5

5

4

SW 24

SW 24

10

5

10

4

7

M18x1

M30x1,5

M18x1 Ø 16

M12x1

Stainless steel V2A

Stainless steel V2A

Chrome-plated brass

Chrome-plated brass

Stainless steel V2A

Stainless steel V2A

PBTP

PBTP

Non-embeddable

Non-embeddable

Non-embeddable

Non-embeddable

-25 … +80°C / -13 … +176°F

-25 … +80°C / -13 … +176°F

-25 … +80°C / -13 … +176°F

-25 … +80°C / -13 … +176°F

-25 … +80°C / -13 … +176°F

-25 … +80°C / -13 … +176°F

-25 … +80°C / -13 … +176°F

-25 … +80°C / -13 … +176°F

Connector S12

Connector S12

Connector S12

Connector S12

IP 67

IP 67

IP 67

IP 67

51 g

120 g

51 g

120 g

RCS-1180-000*

RCS-1300-000*

RCS-1181-000*

RCS-1301-000*

* Coupling heads must not be connected to the power supply, nor to an interface device!

WWW.CONTRINEX.COM

51


accessories Cables for RFID couplers 3

3 4

2 1

1

S12 female

S12 female

Part reference

Type

Cable

Length

S12-4FUG-010-NNRN-12FG

Socket straight / socket straight

PUR

1m

S12-4FUG-020-NNRN-12FG

Socket straight / socket straight

PUR

2m

S12-4FUG-050-NNRN-12FG

Socket straight / socket straight

PUR

5m

3 4

2 1

S12 female 3 4

2 1

S12 female

Part reference

Type

Cable

Length

S12-4FUW-010-NNRN-12FG

Socket right angle / socket straight

PUR

1m

S12-4FUW-020-NNRN-12FG

Socket right angle / socket straight

PUR

2m

S12-4FUW-050-NNRN-12FG

Socket right angle / socket straight

PUR

5m

3

3 4

2

4

2

1

1

S12 female

S12 female

Part reference

52

4

2

Type

Cable

Length

S12-4FUW-010-NNRN-12FW

Socket right angle / socket right angle

PUR

1m

S12-4FUW-020-NNRN-12FW

Socket right angle / socket right angle

PUR

2m

S12-4FUW-050-NNRN-12FW

Socket right angle / socket right angle

PUR

5m

Detailed data sheets for these products can be found on the Contrinex website:


WWW.CONTRINEX.COM

53


54

Detailed data sheets for these products can be found on the Contrinex website:


CONTRINET TOOL FOR DEMONSTRATION, TRAINING AND DEVELOPMENT

software low frequency high frequency

KEY ADVANTAGES 端 User-friendly screen 端 Intuitive control 端 Access to individual components 端 Detailed frame analysis

WWW.CONTRINEX.COM

55


software DEMONSTRATION AND TRAINING SOFTWARE, CONID HF-LF ConID HF-LF software allows users to familiarize themselves with Contrinex RFID and, in particular, understand how ContriNet works.

ConID HF/LF

TOOLBAR WORKING AREA

BUS View

A user-friendly screen allows intuitive control of the various program options. It is divided into five fields, allowing the user to access a specific component to which chosen commands will apply.

TREE VIEW

RWM View

TAG View

SPECIAL FEATURES

CAPTURED PACKET

tree view The Tree View describes the ContriNet network as a whole, i.e. all Read/Write Modules connected to the network and the transponders in front of the RWMs.

56

Detailed data sheets for these products can be found on the Contrinex website:


working area

To access commands specific to any one of these components, just click the mouse on a component to display in the work area all the possible commands for that component. For example, the following shows the work area displayed after clicking on an HF transponder.

The work area consists of three fields: − The upper field showing the component involved and its attributes − The command field, below left − The results box, below right

Captured packets

Another interesting field concerns captured packets. This field contains frames of all past transactions between the PC controller and a specific Read/Write Module. These frames can be opened, allowing the user to decrypt each byte in the frame.

This tool is extremely useful because it shows the structure of exchanged frames and provides full information to the integrator during programming of the controller or PLC that controls the industrial bus.

WWW.CONTRINEX.COM

57


58

Detailed data sheets for these products can be found on the Contrinex website:


GET STARTED WITH RFID

starter kits low frequency high frequency

highlights ü Everything you need to get started with RFID ü LF kit and HF kit ü 1 USB adaptor per kit ü 2 Read/Write Modules per kit ü 1 set of transponders per kit ü Cable connectors ü Free ConID LF/HF software

WWW.CONTRINEX.COM

59


starter kits

10011010 011100 11001001

10011010 011100 11001001

2

2

RS485 +24V

01

RS485 +24V

01

23

23

45

45

6

603664 A RLSS

6

789

789

2

USB Adaptor HF RAS-6766-020

2

USB Adaptor HF RAS-6766-020

603664 A RLS-1118

RLLS--133011-00

RLS--13303--0220

+24V DC

+24V DC

The starter kit contains all components necessary for a simple RFID application:

The starter kit contains all components necessary for a simple RFID application:

− − − − −

− − − − −

1 USB adaptor RAS-6766-020 1 all-metal Read/Write Module M18 1 Read/Write Module M30 1 set of transponders Cable connectors

The necessary ConID software can be downloaded from www.contrinex.com.

1 USB adaptor RAS-6766-020 1 Read/Write Module M18 1 Read/Write Module M30 1 set of transponders Cable connectors

The necessary ConID software can be downloaded from www.contrinex.com.

data

60

STARTER-KIT RFID LF

1 USB adaptor, 2 RWMs, 6 tags, 2 T-connectors, 1 power supply, 1 USB cable, 2 connecting cables

STARTER-KIT RFID HF

1 USB adaptor, 2 RWMs, 5 tags, 2 T-connectors, 1 power supply, 1 USB cable, 2 connecting cables

Detailed data sheets for these products can be found on the Contrinex website:


WWW.CONTRINEX.COM

61


market-leading innovation 1979

Sensor business starts with self-contained subminiature inductive sensors: Ø4 mm (instead of M8 before)

1982

Launch of inductive sensor with patented Condist® technology – market leadership with operating distances 3x standard

1986

Launch of Ø3 mm inductive sensors, now market leader for subminiature inductive sensors

1996

Market launch of Ø4 mm subminiature photoelectric sensors

1999

Launch of world’s first inductive sensor with full-metal housing – thanks to patented Condet® technology

2005

Integration of Contrinex’s excellent performance for inductive sensors in CMOS-ASIC (Application-Specific Integrated Circuit), a proprietary development

2007

Launch of RFID products for closed loop industrial applications. First RFID product range with tags and readers in full-metal housing

2008

Launch of Safetinex®, the industrial safety product range

2009

The smart sensor is born. Launch of next generation ASIC, a “system on a chip”, including IO-Link interface

2011

Development starts on Contrinex’s first ASIC for photo­electric sensors

2014

Launch of photoelectric sensor with new generation Contrinex ASIC and IO-Link

Early inductive sensor produced for own use in 1973 (special version for extreme conditions)

ASIC sensor technology

Safety product range

Subminiature photoelectric sensor

62

Detailed data sheets for these products can be found on the Contrinex website:


Contrinex product ranges

Sensors

Inductive

BASIC MINIATURE from 3 x 12 mm EXTREME the world’s toughest EXTRA PRESSURE 100 bar HIGH PRESSURE 1000 bar EXTRA TEMPERATURE 120°C HIGH TEMPERATURE 230°C WASHDOWN Ecolab approved ANALOG OUTPUT WELD-IMMUNE

Photoelectric

CYLINDRICAL SUBMINIATURE CYLINDRICAL MINIATURE CYLINDRICAL SMALL CUBIC SUBMINIATURE CUBIC MINIATURE CUBIC SMALL CUBIC COMPACT FIBER-OPTIC AMPLIFIERS, FIBERS

Ultrasonic MINIATURE SMALL COMPACT

Capacitive

BASIC HIGH PERFORMANCE

Safety

Light curtains FINGER PROTECTION HAND PROTECTION

Access control barriers ACCESS CONTROL

RFID

Low frequency (125 kHz technology)

SYNTHETIC components ALL-METAL components INTERFACES for industrial fieldbuses

High frequency (13.56 MHz technology)

STANDARD components TAGS EMBEDDABLE IN METAL TAGS FOR HIGH TEMPERATURE 250°C R/W MODULES WITH USB INTERFACES for industrial fieldbuses For special products see Contrinex catalog, downloadable from our website: www.contrinex.com

WWW.CONTRINEX.COM

63


all over the world Spain Sweden Switzerland* Turkey Ukraine

Europe Austria Belgium* Croatia Czech Republic Denmark Estonia Finland France* Germany* Great Britain* Greece Hungary Ireland Italy* Luxembourg Netherlands Norway Poland Portugal* Romania Russian Federation Slovakia Slovenia

Africa Morocco South Africa the Americas Argentina Brazil* Canada Chile Mexico* Peru United States* Venezuela

Korea Malaysia Pakistan Philippines Singapore* Taiwan Thailand Vietnam australasia Australia New Zealand middle east Israel United Arab Emirates

Asia China* India* Indonesia Japan*

* Contrinex subsidiary

Terms of delivery and right to change design reserved.

HEADQUARTERS CONTRINEX AG Industrial Electronics route André Piller 50 - PO Box - CH 1762 Givisiez - Switzerland Tel: +41 26 460 46 46 - Fax: +41 26 460 46 40 Internet: www.contrinex.com - E-mail: info@contrinex.com

www.contrinex.com © CONTRINEX AG

2015

999 308 002 - KAY - 04.15 - 3’000

RFID Catalog - English  
Read more
Read more
Similar to
Popular now
Just for you