Issuu on Google+

1

11

THE NEW ENGLAND EDITION

A Supplement to:

95

1

201 16 9

26

2

1 3

91

89

2

95 3

2 2 7

1

93

495

16

89 4

89

Formerly

95

202

7

®

91

9

95

93

2

95 2

93 90

90

7

March 13 2013

95 91

7

495 6 195

395

95 91

3

84 6

84

6

E

q

u

I

p

M

E

N

t

G

u

I

d

E

95

95

Vol. XLIX • No. 6

“The Nation’s Best Read Construction Newspaper… Founded in 1957.” Your New England States Connection •  Kent Hogeboom 1-800-988-1203

2013 EZ-Screen 1200XL

Kraft power Corporation perkins Master Service Dealer NJ, MA & NY engines, Parts & Service

800-969-6121 www.kraftpower.com

Family-Run Cavaliere Industries Enters Agreement to Mill Local Conn. Towns

WE STOCK RUBBER TRACKS for Over 2,500 Models! New Option Separate 3 products

6’x5’ Screenbox Works with 1/2 to 1 3/4 Yd. Loaders, 25 H.P. Kohler Diesel Engine, 24” Conveyor Dumps Screened Product 9’ High

The Anaconda DF410 two-deck scalper screening mulch for Recycle Depot of Poughkeepsie, N.Y.

Some Used Tracks Available.

BEST PRICES! • GUARANTEED TO FIT • HIGH QUALITY • FAST SHIPPING

888-888-1248

$39,500 plus freight. Other Screeners Available

ARGuS INduStRIAL CO. www.ez-screen.com

Kraft Power Corporation

engines, Parts & Service

866-745-5828 800-969-6121 Woburn, MA & Syracuse, NY

Authorized Deutz Distributor

Auctioneering & Liquidation

ITL Auctioneering

www.itlauctions.us www.foleyengines.com

WANTS YOUR HAMMER REPAIR w

CALL 888-81-GORILLA (46745)

Justin Lyerla (508) 824-3262

WANtEd CATERPILLAR EQUIPMENT Call Lou Giza

603-595-2090

By Jay Adams

paving and sealing work to complete 2012. “The All County work has had us in the towns of Tuxedo, Sloatsburg, Port Cavaliere Industries, one of the most Jervis [N.Y.], Middletown and Nyack,” respected smaller contracting firms in said Lou Cavaliere. “In Rockland Connecticut, has entered into two sepaCounty, we will only supply milling rate agreements to mill the towns around services,” added his brother. them over the next several years. This All County sub milling and “We have two separate jobs. One as a paving contract consists of trench and subcontractor for general contractor All excavation repairs to asphalt roads County Co. paving and sealing work, we throughout the county where new utiliwill mill for permanent road repairs, and ties were installed or pipe failures were [to] supply the paver and paving crew for the larger repairs in Orange and Dominick Cavaliere Sr., one of the repaired. “There was a variety of equipment Rockland [N.Y.] Counties,” said Lou founders of Cavaliere Industries Cavaliere, who runs his company with Inc., speaks at the 2007 UCONN used during this process and it depended on the actual size and depth of the his brother, D.J. Cavaliere. Family Business Awards. trench or patch. For the smaller work, “The second project is directly for Rockland County Public Works,” added his brother, D.J. “It we utilized a Wirtgen W500 milling machine for small is a three-year contract in which we will supply milling serv- patches or road crossings,” said D.J. Cavaliere. “On any ices throughout the county on their own roads. The contract areas that were larger, we used our Wirtgen W1000 milling machine that would occasionally mill up to eight inches in is an estimated 600,000 square yards.” The Rockland, N.Y., County contract was through a pub- depth. lic bidding process. The company already has begun road see CAVALIERE page 4 CEG CORRESPONDENT


Page 2 • March 13, 2013 • www.constructionequipmentguide.com • New England States Supplement • Construction Equipment Guide

THE W.I. CLARK COMPANY Brookfield, CT • Wallingford, CT • Plainfield, CT Call Mark Doty @ 203-823-2316

1998 Deere 410E

2008 Deere 524K

c/heat, 4x4, std hoe, 2000 original hours

2006 Deere 544J

c/air, hi lift, hi- vis hyd coupler w/2.75 yd bucket, radials

2003 New Holland LS180 c/heat, gp bucket, 80% rubber, great snow machine

A/C, RC, 3rd valve hyds, JRB hyd cplr and 3 yd bucket

stk# 21372 ..........................$47,500

stk# 20889 ........................$110,500

stk# 21348 ........................$127,500

stk# 21417 ............................$24,000

Deere 450D

2007 Deere 50D

2011 Deere 270DLC

2004 Hitachi ZX270LC

ROPS, 6 way blade, 2240 original hours

ROPS, 890 hours, hydraulic thumb

c/air, 10' 6" arm, 54" bucket

c/air, 10' 8" arm, 42" pin on bucket

stk# 21370 ............................$13,500

stk# 20936 ..........................$42,500

stk# 20958 ........................$189,000

stk#21442 ..........................$126,000

IR P185WJD

1988 Deere 570B

2006 Deere 250D

2009 Carlson CP-90

Deere powered, 90% rubber, 3 to choose from

c/heat, 12’ blade, front scarifier, 80% rubber, 833 original hours

Starting at 6,000

stk# 21413 ..........................$65,000

WHEEL LOADERS 2011 DEERE 244J, C/AIR, R/C 3 VALVE HYDS, 1 YD BUCKET WITH HYD CPLR, EXCELLENT CONDITION, STK# 22179 ..............$72,500

Cat engine, 8-15’ electric screed, 416 demo hours, excellent condition

25 ton haul truck, c, air, 80% radials, tailgate, great condition

stk# 20949 ........................$146,500

stk# 20713 ........................$110,500

DOZER – CRAWLER 1984 DEERE 450D, 6 WAY BLADE, GOOD CONDITION, STK# 21370 ..............................................................................................$13,500

2008 DEERE 344J, A/C, RC, 3RD VALVE HYDS, HYD COUPLER, 920 HRS, STK#20274 ..................................................................$98,500 2004 DEERE 544J, C/AIR, RC, RADIALS, 3RD VALVE HYDS., JRB COUPLER, 2.5 YD BUCKET, STK#20904 ............................$121,000

2007 DEERE 1050J, A/C, 24" PADS, 159" SEMI-U BLADE, MS RIPPER, NEW PAINT, STK#20688 ............................................$315,000 EXCAVATOR – CRAWLER

2007 DEERE 544J, C/HEAT, HI-LIFT, 2 FUNCTION HYDS., STK#21419 ........................................................................$102,000

2004 KOBELCO SK115SRDZ, 9’8” ARM, HYD THUMB, 32” BKT,

INTERNATIONAL 530, EX-MUNICIPAL LOADER, 3 YD BUCKET, NEW ENGINE AND TRANS APPROX 4 YEARS AGO ......................$17,500

MOTOR GRADER

COMPRESSORS IR P185WJD, DEERE POWERED, 90% RUBBER, 2 TO CHOOSE FROM ..............................................................STARTING AT $6,000

BLADE, 24” PADS, LOW HOURS, STK# 21428 ....................$66,500

1988 DEERE 570B, C/HEAT, 12’ BLADE, FRONT SCARIFIER, 80% REAR RUBBER, 833 ORIGINAL HOURS, FULLY SERVICED, STK# 21413 ....................................................................................$65,000

See Our Complete Inventory at www.wiclark.com


Construction Equipment Guide • New England States Supplement • www.constructionequipmentguide.com • March 13, 2013 • Page 3

MASSACHUSETTS

CONNECTICUT

251 Shaker Road, East Meadow, MA 01028 Direct: 413-525-6351 Toll Free: 800-292-6351 Parts Direct: 877-255-6351

1980 Berlin Turnpike, Berlin, CT 06037 Direct: 860-356-0840 Toll Free: 800-352-4473 Parts Direct: 860-356-0848

www.tylerequipment.com

www.tylerequipment.com

2005 VOLVO EC240B LC, Stk #: 12231, S/N: 11777, 3900 Hrs, This unit is in our East Longmeadow office. Call 1-800-352-4473 ........................$97,500

2002 VOLVO EC35, S/N: 28314849, 3475 Hrs, 2002 VOLVO MINI-EXCAVATOR, Call 1-800-352-4473 for more information! ......................................$25,000

2010 VOLVO HB1100, Hyd. 2300 ft/lb hammer, w/S6 Manufacturer Plate, New Hoses Chisel Point. 6 Month Mgf. Warranty ..............................$33,500

2006 INGERSOLL-RAND DD90HF, Stk #: 8650, S/N: 190361X, 1250 Hours, 66” Drum, Work Lights, Cummins Diesel ..............................$57,000

2007 INGERSOLL RAND DD90HF, Stk #: 8333, 1200 Hrs, 66” Drums, Cummins Diesel Eng., Work Lights, ROPS Lights and Strobe ................$57,000

2006 VOLVO EC460B LC, S/N: 80090, 7420 Hrs, Many New Parts; Track Chains, Sprockets, etc. READY TO WORK! ....................................$156,000

CHIPPERS

ATTACHMENTS

1992 MORBARK 290, S/N: 8061, 2194 hours ......................................................$6,000

2008 MSD250R Shear, S/N: 626034, Full Rebuilt by Genesis in 2012, 0 Cycles, Bracket Fits Most Brands w/a Bushing & Pin Kit, FOB Superior, WI ..............................$136,500

1990 OLATHE 986, #11957, 2309 Hrs, 12” Brush Chipper has Ford Diesel Engine and all the Parts and Service Manuals, Call Tom Tyler, VP at 203-509-0967................$6,000

EXCAVATORS

Volvo Construction Equipment

2005 SENNEBOGEN 850M, S/N: 850.0.149, 0 Hrs on Brand New Boom! ........$295,000


Page 4 • March 13, 2013 • www.constructionequipmentguide.com • New England States Supplement • Construction Equipment Guide

Cavaliere Awarded Two-Year Contract With Utility Company CAVALIERE from page 1

“The deeper mills required a three-lift process to install the new HMA as per the specs,” he added. “On the larger mill projects we used our Wirtgen W2100 mill with an 87-inch drum and our crews also were installing HMA directly behind the mill crew via the LeeBoy 8816 asphalt paver. There was approximately 10 miles of repairs performed with an average depth of three inches.” A portion of this work also was performed in Port Jervis, N.Y., which borders the Pennsylvania line. In addition to the milling and paving, the specs also called for sweeping (Bobcat skid steer), tack coat (LeeBoy tack wagon) and hot joint crack sealing. All finish roller work was performed by All County crews including the joint sealing, traffic control and trucking of materials. Cavaliere Industries and All County, under owner Robert “Chip” Chipperino, both contributed to the project. During the paving season, the work is ongoing, the brothers added. “We expect to continue next season for All County,” said Lou Cavaliere. Before that, Cavaliere must clear the snow off the roads they will eventually, patch, seal and pave. Like many smaller contractors (under 25 employees), the company has ongoing snow plowing contracts with neighboring municipalities, utilities and company lots. “Cavaliere has been awarded the snow plowing for a local utility company facility for the next four years,” added Lou Cavaliere. “We also do [one] private electric generation plant snow plowing and maintenance.”

NEW ENGLAND EDITION Founder, Publisher & CEO Northeast Publisher Editor In Chief Associate Editor Editorial Consultant Production Mgr. Controller Circulation Mgr. Asst. Circulation Mgr. Main office

Toll Free Fax Web site Editorial e-mail Advertising e-mail

Crushing river rock in Woodstock, Vt., for D&D Excavating, Hartland, Vt. The machines being used are an RM100 2.0 with OS100 screener crushing into an Anaconda TR6036 tracked stacking conveyor. The rock was generated from the Hurricane Irene floods.

Primary Excavation But the company will be doing much more than just clearing the white stuff for utility companies in another large county “Cavaliere has been awarded a two-year contract with a

For advertising rates: Contact

Edwin M. McKeon Sr. Edwin M. McKeon Jr. Craig Mongeau Christine Reckner Pete Sigmund John Pinkerton Tom Weinmann Rolf Krog Cathy Printz

470 Maryland Drive Fort Washington, PA 19034 215/885-2900 800/523-2200 215/885-2910 www.constructionequipmentguide.com editorial@cegltd.com production@cegltd.com

Edwin M. McKeon Jr.

215/885-2900 800/523-2200 215/885-2910 e-mail tmckeon@cegltd.com

Toll Free Fax

Kent Hogeboom •New York •New England 315/823-7668 Toll Free 800/988-1203 Fax 315/823-4136 e-mail khogeboom@cegltd.com Contact

Construction Equipment Guide Northeast Edition (ISSN 1081-7034) is published bi-weekly by Construction Equipment Guide Ltd. Advertising and Editorial Offices are located at 470 Maryland Dr., Ft. Washington, PA 19034. Toll Free 800/523-2200 or Fax 215/885-2910. Annual Subscription Rate $65.00. Call for Canadian and foreign rates. Periodicals postage paid at Ft. Washington, PA and at additional mailing offices. POSTMASTER: Send address changes to Construction Equipment Guide Northeast Edition, 470 Maryland Dr, Ft. Washington, PA 19034. Contents Copyrighted ©2013, by Construction Equipment Guide, which is a Registered Trademark, registered in the U.S. Patent Office. Registration number 0957323. All rights reserved, nothing may be reprinted or reproduced(including framing) in whole or part without written permission from the publisher. All editorial material, photographs, drawings, letters, and other material will be treated as unconditionally assigned for publication and copyright purposes and are subject to Construction Equipment Guide's unrestricted right to edit and comment editorially. Contributor articles do not necessarily reflect the policy or opinions of this publication. Call or write for advertising rates, publication schedule and media kit. The Construction Equipment Guide is not responsible for clerical or printer's errors, every care is taken to avoid mistakes. Photographs of equipment used in advertisements are not necessarily actual photographs of the specific machine. Similar photographs are used occasionally and every effort is taken to depict the actual equipment advertised. The right is reserved to reject any advertising.

utility company as their primary excavation contractor. We will cover three towns in Fairfield County [Conn.];Stamford, Greenwich and Darien,” added Lou Cavaliere. The company’s second contract, milling for Rockland County, N.Y., was awarded in late September 2012 and had an original start date of Oct. 30. But Super Storm Sandy hit and has pushed the start of this project to spring of 2013. “Here we will be providing a full milling service for the county. With milling, clean-up, traffic control, sweeping and trucking with disposal. We will be using a six-to-eight person crew, plus another six-to-10 trucks, depending on dump locations,” said D.J. Cavaliere. “Some of the work will be performed at night as well. In addition to the milling for Rockland County directly, many of the towns and hamlets ‘piggyback’ off the county contract and we will provide the same service for these municipalities within the county.” The work is ongoing and Cavaliere crews — headquartered at 226 Selleck St. — are constantly ready, especially during the kinds of storms that buried New York and Connecticut just after Christmas. “The work is 24-hour, on-call, seven days a week,” said Lou. “Whatever is necessary for the service work, we will do. We have a two-man crew [ready], with additional men and crews if needed.” Cavaliere performs all of their operations, projects and services themselves. The milling and paving work is led by D.J. Cavaliere. “James Townsend will be the lead foreman for our milling work and has vast experience in paving as well,” said D.J. Cavaliere. “There is usually a six-man crew for milling work, and also paving. In addition to our forces, we also could have about six-to-10 trucking sub-contractors on any given day. With the milling work, we also hire an outside sweeping contractor.” In its second new contract, utility work will be tackled by Lou Cavaliere, along with workers Buddy Frank, and the next generation of Cavalieres, sons Justin and Joseph. Utility crews begin with three men, growing to multiple crews of see CAVALIERE page 12


Construction Equipment Guide • New England States Supplement • www.constructionequipmentguide.com • March 13, 2013 • Page 5

A A

Company Company A

ACompany A A

Company Company Company

Serving Servin ng All Of Your Your o partner for portable e New E England N l authorized d and screening As Terex®crushing Finlay Distributors... From SIX Locations! Jaw, IImpact mpact & C Cone one C Crushers rushers hers

2 & 3 Deck I nclined & Horizontal Screens

Heavy Duty Screens

Sales, Rentals, Parts and an nd Service Serrvice

Complete Modular Washing Systems

Chadwick-BaRoss has formed a team of specialists to provide sales and service to its screening and crushing customers throughout the six-state territory. For more information contact:

Bangor, Bangorr, ME M 800-698-4838

C Caribou, aribou, ME 800-270-2547

C Chelmsford, helmsfford, M MA A 800-804-0775

C Concord, oncord, NH 800-477-4063

W Westbrook, estbrook k, ME M 800-262-5714

Munroe, CT Munroe, CT 203-577-8899

Or follow follow us:

Visit Our NEW Website

w www.chadwick-baross.com ww.chadwick-baross.com w www.cbused.com ww.cbused.com

Check C heck CB out h on n Facebook! Facebook!


Page 6 • March 13, 2013 • www.constructionequipmentguide.com • New England States Supplement • Construction Equipment Guide

Newport • Providence • Washington • Bristol • Kent • Carolina • Newport • Providence • Washington • Bristol • Kent • Carolina • Newport • Rhode Island... Providence • Washington • Bristol • Kent • Carolina • Newport • Providence • Washington • Bristol • Kent • Carolina • Newport • Providence • Washington • Bristol • Kent • Carolina • Newport • Providence • Washington • Bristol • Kent • Carolina • Newport • Providence • Washington • Bristol • Kent • Carolina • Newport • Providence • Washington • Bristol • Kent • Carolina • Newport • Providence • Washington • Bristol • Kent • Carolina • Newport • Providence • Washington • Bristol • Kent • Carolina • Newport • Providence • Washington • Bristol • Kent •

“The Ocean State” Highway Projects

The Rhode Island Department of Transportation received bids for transportation-related improvement projects. Following is a list of some of the projects let. R.I. Contract No.: 2012-CB-086 Project: Type II emergency replacement of navigational lighting for Henderson Bridge No. 600. Contractors and Bid Amounts: • Rossi Electric Company — $160,427 • Aetna Bridge Company — $163,929 • E. W. Audet — $168,180 R.I. Contract No.: 2012-CB-089 Project: Interim shoring of Huntington Viaduct Bridge No. 504. Contractors and Bid Amounts: • Aetna Bridge Company — $1,753,146 • Cardi Corporation — $2,261,591 • Northern Construction Service LLC — $2,348,014 R.I. Contract No.: 2012-CH-005 Project: 1R - West Main Road C-3. Contractors and Bid Amounts: • D’Ambra Construction Company Inc. — $3,846,413 • J.H. Lynch & Sons — $4,196,835 • Cardi Corporation — $4,259,147 • Narragansett Improvement Company — $4,336,707 R.I. Contract No.: 2012-CH-006 Project: 1R Elm St., Beach St., Railroad Ave., West St., Dixon St. and Granite Quarry Bridge No. 854. Contractors and Bid Amounts: • Cardi Corporation — $2,876,286 • J.H. Lynch & Sons — $3,140,657 • D’Ambra Construction Company Inc. — $3,183,755 • M.R. Pavao — $3,494,483 • Narragansett Improvement Company — $3,676,329 R.I. Contract No.: 2012-CH-044 Project: Tropical storm Irene statewide damage repairs. Contractors and Bid Amounts: • Lucena Bros. — $90,290 • Narragansett Improvement Company — $125,200 • Cardi Corporation — $144,495 • Brito’s Landscaping Services LLC — $150,225 • Hartford Site Construction LLC — $204,000 • HK & S Construction — $209,000 • Northern Construction Service LLC — $210,736 R.I. Contract No.: 2012-CH-052 Project: Fishway and dam improvements at Potowomut Pond Dam. Contractors and Bid Amounts: • Narragensett Dock Works Inc. — $49,153 • Mas Building & Bridge Inc. — $138,260 • J.H. Lynch & Sons — $150,450 • D’Ambra Construction Company Inc. — $156,560 • New England Infrastructure — $162,200 • John Rocchio Corporation — $165,000

• HK & S Construction — $190,534 • William Anthony Excavating — $200,260 • Northern Construction Service LLC — $249,160 R.I. Contract No.: 2012-CH-077 Project: Emergency repairs on Ocean Road and the Narragansett Seawall. Contractors and Bid Amounts: • J.H. Lynch & Sons — $75,979 • Narragansett Improvement Company — $122,237 • Cardi Corporation — $126,235 • Northern Construction Service LLC — $131,666 • HK & S Construction — $178,897 R.I. Contract No.: 2012-CH-082 Project: Imp. to Route 44 Contract 2B - Austin Avenue to Danecroft Avenue. Contractors and Bid Amounts: • Cardi Corporation — $2,321,602 • J.H. Lynch & Sons — $2,388,260 • D’Ambra Construction Company Inc. — $2,427,777 R.I. Contract No.: 2012-CR-072 Project: 2012 Crack Sealing Limited Access. Contractors and Bid Amounts: • Sealcoating Inc. — $261,643 • Annseal Inc. — $488,730 R.I. Contract No.: 2011-CH-045 Project: Northwest Bike Trail/Woonasquatucket River Bikeway C-3.

Contractors and Bid Amounts: • Lucena Bros. — $1,263,799 • Cardi Corporation — $1,415,223 • J.H. Lynch & Sons — $1,442,266. • Northern Construction Service LLC — $1,495,998 • Narragansett Improvement Company — $1,574,640. • D’Ambra Construction Company Inc. — $1,583,629 R.I. Contract No.: 2011-CH-097 Project: Drainage improvements to Route 3 and Manchester Street. Contractors and Bid Amounts: • John Rocchio Corporation — $198,000 • D’Ambra Construction Company Inc. — $198,750 • Cardi Corporation — $294,000 R.I. Contract No.: 2012-CB-060 Project: Bridge preservation-Contract 1. Contractors and Bid Amounts: • Cardi Corporation — $4,963,661 • Aetna Bridge Company — $5,045,555 • D’Ambra Construction Company Inc. — $6,298,253 R.I. Contract No.: 2012-CH-026 Project: Type 1 emergency repair to Route 12 culvert. Contractors and Bid Amounts: • J.H. Lynch & Sons — $36,300 • D’Ambra Construction Company Inc. — $45,750 • John Rocchio Corporation — $74,900 • Cardi Corporation — $79,975


Construction Equipment Guide • New England States Supplement • www.constructionequipmentguide.com • March 13, 2013 • Page 7

61 Silva Lane Dracut, MA 01826 (978) 454-3320 Fax: (978) 454-3325

www.equipmenteast.com HEAVY CONSTRUCTION EQUIPMENT

SALES • RENTALS • PARTS • SERVICE

Crushing and Screening Plants as well as Keestrack/OM parts in stock.

Hydraulic Hammers for All Your Demolition Needs. Besides the eco-friendly silenced design, which fits international standards to be used in environmentally noise sensitive areas, the Ramfos TF series hydraulic hammers boast unbeatable performance. We perform complete hammer rebuilds and have a complete parts inventory in stock at our facility for all models of Ramfos hammers.

• Pile Drivers • 360˚ free rotation & 90˚ tilting rotation of jaw clamp • Tilting structure can easily be attached and detached

Perfect where there is limited space. Yanmar introduced the first Swing boom excavator, First Rubber tracked excavator and First Zero Tail Swing excavator.

550 ft lbs - 15,000 ft lbs available

We’ve ve become attached to your machines. AR Series™ hydraulic impact hammers

Rammer® Mid-Range all-new w Model 2155 hydraulic impact hammers

Buy Proven High Quality Construction Equipment from one of the World’s Leading Manufacturers and Save $$$$ from Competitor’s Brands.

Rammer® Small Range hydraulic impact hammers

Where can you go to get high performance boom-mounted attachments?

Allied Construction Products, LLC For over 70 years, we’ve developed developed many attachments that are legendary in the construction and demolition industries that demand high performance. Names like Ho-Ram, Ho-Pa ® and Pedestal Breaker System™ are names that equal: Hy-Ram®, Rammer, Ho-Pac UÊ UÊSimple, le, proven design (Our attachments have high resale or trade-in value) U Reliable performance (If you purchased an Allied attachment, you’re probably still using it) AEM– CIMA– ratings, our attachments AE formerly CIMA U Superior productivity (Compare AEM get the job done faster) And, now ow Allied adds to that great family background with the Rammer®, AR Series™ and all-new Hy-Ram® hammers. Allied’s attachments don’t take a back seat to any competitor. In particular, our Rammer® product features a long-stroke design, all oil operation and ProControl. All of our high performance boom-mounted attachments are supported by the most respected parts and service organization in North America. Customer satisfaction is job one at Allied. Great products supported by people who know the industry and its customers. To put a high performance Allied attachment on your machine, visit the Tyler Equipment Corporation location nearest you. We’ve become attached to your machines.

Tyler Equipment Corporation Ho-Pac ® vibratory compactor/drivers

Hy-Ram® hydraulic impact hammers

All-new AMS Series mobile shears

CT LOCATION: MAIN OFFICE: 1980 Berlin Turnpike 251 Shaker Road Berlin, CT 06037 East Longmeadow, MA 01028 1-800-352-4473 1-800-292-6351 www.tylerequipment.com

Contractor’s Mechanical Grapple material and waste handling systems

© 2013 Allied Construction Products, LLC


Page 8 • March 13, 2013 • www.constructionequipmentguide.com • New England States Supplement • Construction Equipment Guide

The N.i.c.e. Company Northeast International Construction Equipment Co., Inc.

Maximum Output

“Your Newest Source for Quality Equipment”

I Buy Machines

A tthe At he lowest low we t west ccost ost p per er ton! Clean Chips. Microchips. Biomasss. Land Clearing. For 30 yearss, Petterrson chippers havve led tthe ZD\³ \³ÀQGRXWPRUHDW www ww ww.p pettersoncorp.ccom y q p 30 Birch Island Road, Webster, MA PH: 508.949.0005 www.barryequipment.com

2009 Cat 336DL, 12’10” Stick, 6000 Hrs $169,000

2008 Volvo ECR88, QC, Tilting Bucket, Rotating Grapple, 2600 Hrs $59,000

2008 JD160D, QC, Hyd Thumb, 2600 Hrs, REDUCED $99,000

2006 Terex TXC300-2, Long Reach, 3300 Hrs $99,000

2008 Komatsu D51, EROPS, Very Nice! Only $99,000

2008 Doosan DL200 Loader, Only 1000 Hrs! Only $79,000!

2006 Cat 930G, 3300 Hrs, QC Nice! $89,000

1999 Cat 950G, Runs Good, Command Control, 16K Hrs $49,000

Cat 420DIT, Very Nice Machine! $38,500 Also in Stock: 420E & 420EIT

Now Off 495 in Franklin!!! 76 Grove St., Franklin, MA

508-966-4888 508-966-4887

Call Bryn Smith at:

Fax: 800-269-6520 • www.petersoncorp.com • PO BOX 40490 • Eugene, OR 97404

2009 Cat 315DL, VERY NICE!!, 2200 Hrs, Plumbed $119,000

Email: brynsmith@thenicecompany.com

See all of my machines at www.thenicecompany.com


Construction Equipment Guide • New England States Supplement • www.constructionequipmentguide.com • March 13, 2013 • Page 9

CRUSHING EQUIPMENT, PARTS & SERVICE Ace Equipment Sales, Inc. and Milroy and Company LLC 171 Tolland Turnpike (Route 74) • PO Box 535 • Willington, CT 06279

(860) 429-2793 • Fax: (860) 429-0542 Don Bayer • (518) 527-1910

John Patton • (860) 614-3426

Bill Dahill • (203) 314-2113

Go to www.acecrushers.com for a complete listing and description of our new and used equipment.

Manufacturer of Portable Primary Crushing and Screening Equipment

RDS-20

USED EQUIPMENT FOR SALE Crushers Cedarapids 30 x 42 Portable Jaw Plant w/Jaw Crusher

s/n 50309/50382, 42” x 20’ Vibrating Grizzly Feeder, 150 HP Electric Crushing Motor, End Discharge Conveyor, Ready for Transport, FOB: Willington, CT..........................$195,000

Eagle 1536 Portable Jaw Crushing Plant

s/n 10945, Eagle Model 33D4155, 15x36 Jaw Crusher, Vibratory Pan Feeder with Hydraulic Grizzly Dump - Remote Control, 3’x6’ 2-Deck Scalping Screen, Cummins Diesel Engine Drives, 50KW Generator and Hydraulic Pump, Dual-Axle, 30” FoldUp Discharge Conveyor, Rear Discharge Conveyor for Screen Throughs, Jaw Dies Over 50%...VERY GOOD CONDITION!!! ................................$145,000

Pioneer 540CSE Cone Portable Plant

Telsmith 52H Portable Cone Plant

s/n 450CSE101, 45 Allis-Chalmers Cone, DD Screen, Electric Starters and Switch Gear on Board, 200HP, Dual-Axle, Double Deck Screen, Front and Rear Discharge Conveyors ........................$125,000

s/n 505M2588, Refurbished 52S Model H Cone Crusher, Crusher s/n: 202M9842, New Head and Shaft Assembly, New Eccentric, (2) New Thrust Bearings, New Inner Sleeve, New Outer Sleeve, New Inner & Outer Piston Rings, New Countershaft Bearings, New Belleville Springs, 90% Manganese, Hydraulic Relief, Dynamic Adjustment Controls for Close Side Settings & Extraction, Air - Oil Cooler Option, Telsmith Dual-Axle Chassis with Side Discharge Conveyor, 250 HP Motor w/Switch-Geat, Will be Painted, Ready for Transport and Crushing, FOB: Willington, CT ....................................$255,000

WE HAVE ALL THE PARTS YOU NEED: Manganese, Conveyor Belts, Idlers, Head Pulleys, Tail Pulleys and Much More!

Quality Service Guaranteed!


Page 10 • March 13, 2013 • www.constructionequipmentguide.com • New England States Supplement • Construction Equipment Guide

RANDALL SANDERSON (603) 623-3669 • (603) 234-0353 CELL PLEASE VISIT OUR WEBSITE WWW.TQUIP.COM

NEW HAMPSHIRE RHODE ISLAND ORLANDO, FL PUSH IT • MOVE IT • GRADE IT • HAUL IT

WE ARE ONE OF THE LARGEST USED EQUIPMENT DEALERS IN THE COUNTRY! WE SPECIALIZE IN LATE MODEL, LOW HOUR CATERPILLAR AND KOMATSU MACHINES.

WANTED!!!

MACK TRUCKS CAT, DEERE, BOBCAT EQUIPMENT IN ANY CONDITION IMMEDIATE PAYMENT!

CALL JOHNNY MACK HARTFORD, CT 860-883-1186


Construction Equipment Guide • New England States Supplement • www.constructionequipmentguide.com • March 13, 2013 • Page 11

Challenging Challenging jobsites jobsites don't don't intimidate intimidate a Doosan Doosan crawler crawler excavator. excavator. Hydraulic Hydraulic pump pump p performance erformance d delivers elivers ffast, ast, cclass-leading lass-leading cycle cycle times, times, with with a synchronized synchronized engine engine and and hydraulic hydraulic system system that that boosts boosts efficiency. efficiency. IIt's t's d designed esigned tto oo offer ffer iincreased ncreased fflotation lotation in in soft soft soil, soil, while while precision precision controls controls provide provide accuracy accuracy and and power. power. Whether Whether you're you're d digging igging a ttrench, rench, h handling andling b boulders oulders o orr dumping dumping debris, debris, the the Doosan Doosan crawler crawler excavator excavator kkeeps eeps you you productive productive no no matter matter w what. hat. Visit Visit us us to to see see what what D Doosan oosan e equipment quipment ccan an d do o ffor or you. you.

www.bobcatboston.com

www.fwequip.com

www.centralequipmentco.com

Barry Equipment

Bobcat of Boston Inc.

Bobcat of Boston South

F&W Equipment

Central Equipment Company

30 Birch Island Road Webster, MA 01570 508-949-0005

20 Concord Street North Reading, MA 01864 978-664-3727

170 MacArthur Blvd. Bourne, MA 02532 508-759-5020

164 Boston Post Road Orange, CT 06477 203-795-0591

45 Dempsey-Greaves Lane Stillwater, ME 04489 207-827-6193 Fax: 207-827-3774

www.barryequipment.com


Page 12 • March 13, 2013 • www.constructionequipmentguide.com • New England States Supplement • Construction Equipment Guide

Cavaliere’s Fleet Able to MasterAny Highway Challenge CAVALIERE from page 4

three to four men, to satisfy demands. The Stamford-based Cavaliere Industries carries many special permits, including city and/or state road encroachment permits. Safety is critically handled and maintained. The company even exceeds federal standards in some cases. “We ensure that our employees have an OSHA 10 card. We also have some personnel who have taken the Hazwoper24. We need to follow the standard regulations that are required by law, but we strive to have higher in-house standards,” added D.J. Cavaliere. Six Decades, Three Generations Cavaliere Industries has been a family invention for more than 57 years. Started in 1955 by Dominic Cavaliere Sr. and his brother and brother-in-law, the company just saw its third generation come on board to continue the tradition. “The third [generation], Joseph, just finished at the University of Massachusetts and began employment full time in December 2012,” said Lou Cavaliere. D.J., Lou, their children and their 17 employees are ably assisted by office man-

Cavaliere Industries Inc. was contracted by CL&P to provide back up pumping services due to Super Storm Sandy. Anthony Rende operates his service truck crane to place pump in position.

ager/bookkeeping Maria Carlucci, and Lisa Melfi, who runs their parts department and logistics for heavy equipment moves and repair. With complete heavy iron excavation,

Hydraulic Cranes 6-365 Ton

contracting, milling, paving road and site services too numerous to name, Cavaliere maintains a fleet of equipment to get to and master any highway challenge. “Our three bay repair garage is run by Bill

Ackerson and Anthony Rende. Bill has been with the company for 20-plus years and Anthony has been with us for more than five years,” said Lou Cavaliere. “They keep the fleet maintained and work-ready. They also fabricate our custom truck bodies for our specialty work.” Part of that “specialty” work is to improve the neighborhood. Cavaliere Industries gives back very locally to support surrounding enterprises. “We are involved with the Waterside Coalition, which is the neighborhood community group. Our office and yard is in a mixed-use zone of heavy industrial to single-family homes,” added Lou Cavaliere. “We attend meetings to try to improve the community and supply support for specialty-themed meetings, like small business loans or grants, real estate meetings, etc., to see what future projects might look into developing in the Waterside Area or what is available for sale or rent.” For more information, visit www.cavaliereindustries.com. (This story also can be found on Construction Equipment Guide’s Web site at www.constructionequipmentguide.com.) CEG

Bijur Automatic Lubrication Systems VEI Wheel Loader Scales West Springfield, MA 01089-3850 (413) 788-LUBE

Daily & Hourly Services www.astrocrane.com

Fully Insured 200 Codman Hill Rd., Boxborough, MA 01719 978-429-8666

Lubrication Engineers High Performance Lubricants Professional Lubrication Management

Place Your Business Card for... 3 months 6 months 12 months

$300* $585* $1040*

only $50 an issue only $45 an issue only $40 an issue

Call now to reserve your space! 800-225-8448 * pre-payment required


Construction Equipment Guide • New England States Supplement • www.constructionequipmentguide.com • March 13, 2013 • Page 13

Long-Term Lake Champlain River Study Proposed By Wilson Ring ASSOCIATED PRESS

MONTPELIER, Vt. (AP) An organization that oversees inland waters shared by the United States and Canada is considering a long-term study to look for ways to reduce future flooding in Lake Champlain and the Richelieu River, which drains the lake north into Quebec. A draft of the study released Feb. 21 recommended a fiveyear, $10 million to $14 million examination of the history of flooding and assess flood-plain management practices. The study also would examine the possible construction of a gated structure to control floodwaters along the Richelieu and the dredging of a shoal in St. Jean Sur Richelieu, Quebec. The International Lake Champlain-Richelieu River Plan of Study Workgroup is seeking public input and is planning a March 11 meeting in Burlington and March 12 in St. Jean Sur Richelieu. Once the initial study is completed it will be submitted to the five members of the International Joint Commission, which will decide whether to proceed with the study, said Stephanie Castle, the U.S. co-secretary of the workgroup. “We have to come up with a cohesive plan across the international border that protects people and protects property and also protects the environment,’’ Castle said. The International Joint Commission is an offshoot of a 1909 treaty between Canada and the United States designed to prevent and resolve disputes over waters shared between the two countries. Its decisions take into account the needs of a wide range of water uses, including drinking water, commercial shipping, hydroelectric power generation, agriculture, industry, fishing, recreational boating and shoreline property. It has two Canadian members and three U.S. members. The commission created the workgroup to determine what studies were needed to evaluate the causes and impacts of the flooding in the lake and river and determine what studies were needed to develop flood mitigation measures and recommendations. The draft also suggested two less thorough, less expensive options but ultimately recommended the most detailed analysis. Castle said it could be a year or two before the commission decides which option to pursue as well as seek funding. (This story also can be found on Construction Equipment Guide’s Web site at www.constructionequipmentguide.com.)

Plant Trees!

A.T.

Equipment, Inc.

Office

(508) 865-0400 Sales and Rentals

(508) 523-8852 www.atequipment.com

FOR SALE OR RENT ALL OF THESE MACHINES AND ATTACHMENTS ARE IN EXCELLENT CONDITION AND HAVE BEEN MAINTAINED *Full Line IN OUR RENTAL FLEET of Hydraulic AND ARE READY TO GO TO Hammers Available WORK ON YOUR JOB SITE for Sale or Rent TODAY, WHETHER IT BE A *Hydraulic PURCHASE OR A RENTAL Hammer Repair

2008 Cat 345 with auxiliary hydraulics, 13,000 pound hammer and thumb P.O.R. 2009 Yanmar VIO17 300 hours, showroom condition, auxiliary hydraulics, thumb $18,500

DISPLAY ADS/ CLASSIFIEDS Classified Rates: 30 Words or Less for $30.00. Each Additional Word is 95¢. For just an additional $20 your ad can be posted on our online searchable database for 30 days. Ad runs for 2 (two) insertions - no changes in second insertion. PLEASE ENCLOSE PAYMENT WITH ORDER and mail to: 470 Maryland Drive• Fort Washington, PA 19034

215/885-2900 • Fax 215/885-2910 Toll Free 1-800/523-2200 EXCAVATORS

TRAILERS

Hydraulic Excavators

Drop Deck Trailers

John Deere JD790LR, 1 cu yd ditch bucket, good condition, 6403...$41,500.

2005 Felling FT-12-12, decj over wheels, 16’ deck, 5’ beavertail with ramps ....$4995.

800-222-8798

NEW & USED TRAILERS

913-787-2371

Eagle Power & Equipment Montgomeryville PA 215/699-5871

New & Used Parts & Service Modern Equipment Sales & Rental 800-445-4381

NCCCO Crane Operator Training

FORKLIFTS

81 Worcester Providence Turnpike, Sutton, MA 01590

TRAINING

NH Construction Equipment

Sales & Rental 800-445-4381

1999 Komatsu PC400 w/auxiliary hydraulics, new bottom ..................................................$59,000 Rammer E68 hammer completely rebuilt and not used since the rebuild ............................$21,500 Tramac BRH750 hydraulic hammer, 3,000 pound completely rebuilt................................$7,500 2002 John Deere 250 skid steer w/500 hours, cab, heat, a/c, 6-foot hydraulic snow plow, forks, excellent condition........................................$16,500

Eagle PA 610/458-7054

Operator Training

Modern Equipment

2006 John Deere 160CLC auxiliary hydraulics, 3,500 pound hammer, and thumb P.O.R.

New Castle DE 302/652-3028

Mini Excavators

New & Used Parts & Service

2009 Yanmar VIO35 1000 hours, auxiliary hydraulics, quick coupler, thumb, cab with a/c $34,000

Trailers - Misc.

2005 Caterpillar 330C LC, cab, A/C, QC, good condition, 7900 hours ........................$112,500.

NH Construction Equipment

2009 Yanmar VIO45 1000 hours, auxiliary hydraulics, thumb, cab, a/c, hydraulic quick coupler $39,000

800-222-8798

Industrial Forklifts GRADALL / LULL Sales - Service - Training Modern Equipment Sales & Rental 800-445-4381

GENERATORS & GEN SETS

Tower Rigger Knuckleboom Crane Signal Person Trained at our location in PA or NJ or your location. All trainers NCCCO Certified Call 800-841-6189 Atlantic Crane Inspection Services Visit us atwww.atlanticcrane.com

=========== DAILYAND AND WEEK DAILY WEEKLY

EQUIPMENT RENT EQUIPMENT RENTALS CLOSE YOUR JOB CLOSE TOTO YOUR JOB SITE

Generators & Gen Sets

RENTMACHINES.COM RENTMACHINES.CO

For Sale or Rent All Makes and Models Modern Equipment Sales & Rental 800/445-4381

® CATERPILLAR CATERPILLAR ® GENIE GENIE® ® CHALLENGER CHALLENGER ® SCREEN MACHINE SCREEN MACHI


Page 14 • March 13, 2013 • www.constructionequipmentguide.com • New England States Supplement • Construction Equipment Guide

Essex • Bristol • Franklin • Plymouth • Worcester • Middlesex • Norfolk • Dukes • Barnstable • Suffolk • Hampshire • Chilmark • Amherst • Massachusetts... Monterey • Nantucket • Hampden • North Adams • Essex • Bristol • Franklin • Plymouth • Worcester • Middlesex • Norfolk • Dukes • Barnstable • Suffolk • Hampshire • Chilmark • Amherst • West • Monterey • Nantucket • Hampden • North Adams • Essex • Bristol • Franklin • Plymouth • Worcester • Middlesex • Norfolk • Dukes • Barnstable • Suffolk • Hampshire • Chilmark • Amherst • West • Monterey • Nantucket • Hampden • North Adams • Essex • Bristol • Franklin • Plymouth • Bristol • Franklin • Plymouth • Worcester • Middlesex

‘Bay State’ Highway Projects Let

MassHighway received bids for transportation-related improvement projects. Following is a list of some of the projects let. Location: District 6 Document Number: 606361 Project: Scheduled and emergency bridge deck and joint repairs at various locations. Low Bidder: SPS New England Inc. Bid Amount: $3,489,674 Completion Date: Dec. 18, 2013 Location: District 1 Document Number: 606252 Project: Scheduled and emergency bridge structural repairs at various locations. Low Bidder: SPS New England Inc. Bid Amount: $344,381 Completion Date: July 10, 2014 Location: District 5 Document Number: 605686 Project: Scheduled and emergency bridge deck repairs at various locations. Low Bidder: Aetna Bridge Company Bid Amount: $1,196,700 Completion Date: July 17, 2014 Location: Holyoke to West Springfield Document Number: 605594 Project: Resurfacing and related work (including rehabilitation of 16 bridges) on a section of Interstate 91 (FAP# IM-91-1(168)). Low Bidder: SPS New England Inc. Bid Amount: $14,886,806 Completion Date: June 10, 2015 Location: Springfield Document Number: 605817 Project: Roadway reconstruction and related work on sections of Edwards, Spring and Elliot Streets (FAP#s OTF002S(424)X and OTN-002S(424)X). Low Bidder: JBL Construction Company Inc. Bid Amount: $1,431,315 Completion Date: May 23, 2014 Location: District 2 Document Number: 607297 Project: Sign and pavement marking installation at various intersections (FAP# HSI-002S(468)X). Low Bidder: Hi-Way Safety Systems Inc. Bid Amount: $90,335 Completion Date: June 24, 2014 Location: District 3 Document Number: 607298 Project: Sign and pavement marking installation at various intersections (FAP# HSI-002S(469)X). Low Bidder: Hi-Way Safety Systems Inc. Bid Amount: $116,190 Completion Date: June 24, 2013

Location: Cambridge Document Number: 605684R Project: Intersection improvements and related work (including traffic signals) on a section of Broadway at Kendall Square (FAP# SOS-002S(343)). Low Bidder: DeFelice Corporation Bid Amount: $1,088,174 Completion Date: Nov. 9, 2013

Location: Mansfield to Norton Document Number: 605591 Project: Resurfacing, bridge repairs and related work along a section of Interstate 495 (FAP#S IM-495-9(036) and STP-495-9(036)). Low Bidder: Aggregate Industries/Northeast Region Inc., Bid Amount: $10,867,136 Completion Date: June 23, 2015

Location: Lancaster Document Number: 605216 Project: Intersection improvements and related work Lunenberg Road (Route 70) at Route 2 and Old Union Turnpike (FAP#s HSIP-002S(396)X & STP-002S(396)X). Low Bidder: P.J. Albert Inc. Bid Amount: $1,518,672 Completion Date: Nov. 9, 2013

Location: Attleboro Document Number: 606608 Project: Roadway reconstruction and related work of ramp from Interstate 295 NB to Interstate 95 NB (FAP# HSI-295-7(012)). Low Bidder: R.M. Pacella Inc. Bid Amount: $597,602 Completion Date: June 9, 2013

Location: Taunton Document Number: 605167 Project: Roadway reconstruction and related work on a section of Route 44 (Dean Street). Low Bidder: Aggregate Industries/Northeast Region Inc. Bid Amount: $812,522 Completion Date: Oct. 1, 2013

Locations: Athol, Easthampton to Northampton and Chicopee Document Number: 607221 Project: Micromilling, resurfacing and related work along sections of South Main Street (Route 2A), Interstate 91 (NB & SB) and Center Street (SB Route 116). Low Bidder: The Lane Construction Corporation Bid Amount: $1,012,616 Completion Date: Aug. 14, 2013

Location: Pembroke to Marshfield Document Number: 604870 Project: Roadway reconstruction and related work (including traffic signals) on sections of Route 139 (Church Street) (FAP# STP-002S(445)X). Low Bidder: Aggregate Industries/Northeast Region Inc., Bid Amount: $1,108,409 Completion Date: Nov. 8, 2013

Location: Merrimac Document Number: 605689 Project: Resurfacing and related work (including sidewalks) along a section of Route 110 (West Main Street). Low Bidder: J. Tropeano Inc. Bid Amount: $456,922 Completion Date: June 20, 2013


Construction Equipment Guide • New England States Supplement • www.constructionequipmentguide.com • March 13, 2013 • Page 15

160 Elm St. Unit 1 Walpole, MA 02081 (508) 660-7600 Fax: (508) 660-7614

www.lhequip.com

A

STRONGCO Company

Chadwick-BaRoss, Inc. 15 Katrina Road • Chelmsford, Massachusetts (800) 804-0775 • (978) 256-9571 Fax: (978) 256-8802 www.chadwick-baross.com • www.cbused.com


Page 16 • March 13, 2013 • www.constructionequipmentguide.com • New England States Supplement • Construction Equipment Guide

Washington • Windsor • Bennington • Lamoille • Windham • Chittenden • Orange •Vermont... Caedonia • Addison • Orleans • Franklin • Essex • Grande Isle • Washington • Windsor • Bennington • Lamoille • Windham • Chittenden • Orange • Caedonia • Addison • Orleans • Franklin • Essex • Grande Isle • Washington • Windsor • Bennington • Lamoille • Windham • Chittenden • Orange • Caedonia • Addison •

‘Green Mountain State’ Projects

The Vermont Department of Transportation received bids for transportation-related improvement projects. Following is a list of some of the projects let. County: Lamoille Town: Cambridge Project Names: CAMBRIDGE STP 030-2(27) and CAMBRIDGE BRF 027-1(4). Contract ID: 78F163 Location: CAMBRIDGE BRF 027-1(4): On Vt. Route 108, approximately 82.794 m northerly of the Vt. Route 15 and Vt. Route 108 intersection and extending northerly for a distance of approximately 367.206 m. CAMBRIDGE STP 030-2(27): On Vt. Route 15, approximately 128.456 m west of the Vt. Route 15 and Vt. Route 108 intersection, and extending easterly for a distance of approximately 259.520 m; then beginning at a point on Vt. Route 108, approximately 89.095 m southerly of the Vt. Route 15 and Vt. Route 108 intersection, and extending northerly for a distance of approximately 171.889 m, which is the beginning of project BRF 027-1 (4). Project: Removal of existing Bridge No. 21 and construction of a new bridge and approaches on an improved horizontal alignment, construction of Vt. Route 108, sand borrow, subbase, pavement, drainage, signs and other highway related items. Cambridge STP 030-2(27): construction of a roundabout at the intersection of Vt. Route 15 and Vt. Route 108, sand borrow, subbase, drainage, signs and other highway related items. Contractors and Bid Amounts: • A.L. St. Onge Contractor Inc. — $5,579,684 • Beck & Bellucci Inc. — $5,585,716 • S. D. Ireland Concrete Construction Corp. — $5,954,407 • Winterset Inc. — $6,364,943 • New England Infrastructure Inc. — $6,699,760 • CCS Constructors Inc. — $6,735,084

County: Statewide/multiple counties Towns: Waterbury, Bolton and Richmond Project Name: WATERBURY-RICHMOND IM SURF(33). Contract ID: 12A178 see VERMONT page 18


Construction Equipment Guide • New England States Supplement • www.constructionequipmentguide.com • March 13, 2013 • Page 17

Chappell Tractor Sales, Inc. Milford, NH 800/698-2640

Chappell Tractor East, LLC Brentwood, NH 800/616-5666

Kahn Tractor & Equipment, Inc. North Franklin, CT 860/642-7596

Lorusso Heavy Equipment, LLC 160 Elm Street P.O. Box 857 Walpole, MA 02801 508/660-7600 www.lhequip.com


Page 18 • March 13, 2013 • www.constructionequipmentguide.com • New England States Supplement • Construction Equipment Guide

NEW ENGLAND SUPPLEMENT ADVERTISER INDEX A QUICK PICK CRANE SERVICE INC ........................12 A T EQUIPMENT INC......................................................13 ACE EQUIPMENT SALES INC ........................................9 ARGUS INDUSTRIAL COMPANY ....................................1 ASTRO CRANE ..............................................................12 BARRY EQUIPMENT CO..................................................8 C N WOOD CO INC ........................................................20 CHADWICK BAROSS MA ..........................................5,15 CLASSIFIED ....................................................................13 CONTRACTOR’S CORNER ..........................................12 D C BATES EQUIPMENT CO INC ................................10 DOOSAN NORTHERN NEW ENGLAND........................11 EQUIPMENT EAST ..........................................................7 FOLEY MARINE & INDUSTRIAL ENGINE ......................1 GORILLA HAMMERS........................................................1 HYUNDAI CONSTRUCTION EQUIPMENT....................17 ITL AUCTIONEERING ......................................................1 J R VINAGRO CORPORATION........................................1 KRAFT POWER CORP ....................................................1 LORUSSO HEAVY EQUIPMENT LLC............................15 LOU GIZA EQUIPMENT....................................................1 LUBRICATION TECHNOLOGIES INC............................12 MILTON CAT....................................................................13 POWERSCREEN NEW ENGLAND ................................16 ROGERS BROTHERS ....................................................19 SUMMIT SUPPLY LLC/MULTI MACHINE ........................1 T-QUIP SALES & RENTAL INC ......................................10 THE N.I.C.E. COMPANY ..................................................8 THE W I CLARK CO ........................................................2 TYLER EQUIPMENT CO ..............................................3,7 WANTED MACK TRUCKS..............................................10 The Advertisers Index is printed as a free editorial service to our advertisers and readership. Construction Equipment Guide is not responsible for errors or omissions.

Washington • Windsor • Bennington • Lamoille • Windham • Chittenden • Orange •Vermont... Caedonia • Addison • Orleans • Franklin • Essex • Grande Isle • Washington • Windsor • Bennington • Lamoille • Windham • Chittenden • Orange • Caedonia • Addison • Orleans • Franklin • Essex • Grande Isle • Washington • Windsor • Bennington • Lamoille • Windham • Chittenden • Orange • Caedonia • Addison •

‘Green Mountain State’ Projects VERMONT from page 16

Location: Northbound and southbound barrels, NB: MM 63.515 - MM 79.000; SB: MM 63.510 - MM 79.000. Included are the ramps at Interchanges 10 and 11, with the exception of Ramp A at Interchange 10. Project: Surface preparation involving patching, pot hole repair, crack sealing, cold planing, overlaying with a thin bituminous surface treatment, traffic markings and other highway related items. Contractors and Bid Amounts: • Pike Industries Inc. — $4,671,049 • The Gorman Group LLC — $4,878,199 • Frank W. Whitcomb Construction Corporation — $4,940,986 • All States Asphalt Inc. — $5,904,195

County: Rutland Towns: Fair Haven, Castleton and Rutland Project Name: FAIR HAVEN-RUTLND BHF BPNT(10). Contract ID: 10B182 Location: Rutland Br. D4-3, Rutland Br. D4-4, Fair Haven Br. 5E & 5W, Fair Haven Br. 7E & 7W, Castleton Br. 9E & 9W, Castleton Br. 10E & 10W and Castleton Br. D11 . Project: Cleaning, lead paint removal and repainting the existing steel superstructure members and minor associated work. Contractors and Bid Amounts: • Vimas Painting Company Inc. — $2,818,322 • Atlas Painting And Sheeting Corporation — $3,690,000 • Amstar Of Western New York Inc. — $3,730,000 • Panther Industrial Painting LLC — $4,025,706 • Olympus Painting Contractors Inc. — $5,125,255 • Hercules Painting Company Inc. — $7,127,791

County: Windsor Town: Woodstock Project Name: WOODSTOCK BHO1444(52). Contract ID: 96J262 Location: TH 2 (Taftsville Covered Bridge Road) in the town of Woodstock located approximately 0.02 mi. easterly from the intersection with U.S. 4 and extending easterly 0.04 mi. on TH 2. Project: Taftsville covered bridge rehabilitation includes retrofit of timber superstructure, replacement of collapsed abutment and repair of remaining abutment and pier masonry foundations with related approach work. Contractors and Bid Amounts: • Alpine Construction LLC — $2,423,519 • Northern Construction Service LLC — $2,889,386 • Renaud Brothers Inc. — $3,285,057 • Wright Construction Company Inc. — $4,543,814

County: Chittenden Town: Essex Project Name: ESSEX STPG SGNL(41). Contract ID: 12D194 Location: At the intersection of Vt. 2A, Vt. 289 EB on-ramp and Susie Wilson Bypass and at the intersection of Vt. 2A and Vt. 289 WB off-ramp. Project: New controller cabinets, new controllers with adaptive traffic control (atc) capability, internet/intranet connection, rearrangement of signal heads, new led lenses, video detection and radio interconnect. Contractors and Bid Amounts: • Engineers Construction Inc. — $278,630 • Don Weston Excavating Inc. — $296,692


Construction Equipment Guide • New England States Supplement • www.constructionequipmentguide.com • March 13, 2013 • Page 19

Tyler Equipment

C.N. Wood Co., Inc.

Joseph Equipment Company

251 Shaker Road East Longmeadow, MA 01028 (413) 525-6351 (800) 292-6351

200 Merrimac St. Woburn, MA 01801 (781) 935-1919

300 Gay Street Manchester, NH 03103 603-641-8608

Avon, MA (508) 584-8484

www.josephequipment.com

1980 Berlin Turnpike Berlin, CT 06037 (860) 356-0840 (800) 352-4473 Parts: (860) 356-0848

www.tylerequipment.com

Johnston, RI (401) 942-9191

www.cn-wood.com


Page 20 • March 13, 2013 • www.constructionequipmentguide.com • New England States Supplement • Construction Equipment Guide

LOADERS From Komatsu - The Loader Experts

             5IF8"5JFS*OUFSJN8IFFM-PBEFSJTBDMBTTMFBEJOHQFSGPSNFSXJUI          JNQSPWFNFOUTJOQSPEVDUJPO GVFMFGmDJFODZ PQFSBUPSDPNGPSUBOETFSWJDFBCJMJUZ t,PNBUTV4NBSU-PBEFS-PHJDSFEVDFTGVFMDPOTVNQUJPOXIJMFNBJOUBJOJOHQSPEVDUJPO            t-BSHFDBQBDJUZUPSRVFDPOWFSUFSXJUIMPDLVQQSPWJEFTGVFMTBWJOHT           t/FXw-$%NVMUJGVODUJPONPOJUPSQBOFMQSPWJEFTFBTZBDDFTTNBDIJOFEJBHOPTUJDT.            t,PNBUTV$"3&QSPWJEFTDPNQMJNFOUBSZ5JFSNBJOUFOBODF JODMVEJOH,PNBUTV%JFTFM           1BSUJDVMBUF'JMUFSFYDIBOHF$POUBDUZPVS,PNBUTVEJTUSJCVUPSGPSEFUBJMT         

www.komatsuamerica.com www.komatsuamerica.com

200 Merrimac Street Woburn, MA 781-935-1919

60 Shun Pike Johnston, RI 401-942-9191

102 State Road Whately, MA 413-665-7009

140 Wales Avenue Avon, MA 508-584-8484


NewEngland #6,2013