Page 1

INSTALLATION & USER INSTRUCTIONS


2

Qasair Rangehoods Installation Instructions


Important Information

4

Instructions for Models MT / MC / FA / CON / NDCH / LIS / ETN / ECH / WCV

8

Instructions for Models EAS / WES

28

Instructions for Models H Series & PYR

33

Instructions for Models 3F / ST / SEA / SMF / CM / STA / STAR / IN

37

Instructions for Models TR CT

54

Instructions for Models BRH / LAM / BAR / MAR / MAJ / FAS

56

Instructions for Models 4F / PRE / MA / SQ 420 / MOL / HAM / FPR / BUR / BEL / D 400 / D 500 / SEN

67

Ducting Pieces

84

Installation Ideas

96

Rangehood Cleaning, Filter Cleaning

101

Appliance Guarantee

102

Guarantee Exclusions

103

Standard Warranty

104

Qasair Rangehoods Installation Instructions

3


IMPORTANT INFORMATION CONDARI PTY LTD makes over 120 different models of QASAIR Rangehoods plus many special rangehoods designed by architects and interior designers. It is important to follow the installation instructions. There are many different cooking appliances on the Australian market today. Examples: Electric Ego, ceramic hotplates, teppanyaki plates and Induction hotplates. There are gas hotplates with four burners, a wok burner or fish burner of all different heat output. Many companies offer a vario system with individual two gas burners, a wok burner, electric ceramic hotplate, an electric griller or barbecue and an induction hotplate. There are three gas cooking appliances with an open flame griller or barbecue. Gas regulations require different heights for different brands of rangehoods. QASAIR rangehoods can be fitted 600 mm above the trivet of a gas hotplate. This is due to the fact they do not have plastic motors or plastic internal parts. Over the open flame gas grillers or gas barbecues the filters must be 1200 mm above the cooking surface. Therefore, a special rangehood is required to comply with the regulations. There are no regulations over an electric hotplate except for those set out by the manufacturer. Above a gas wok burner or electric griller or barbecue they should be 700 mm to 800 mm above. All decorative rangehoods in the Sapphire, Gallery, Imperial, Argyle, Federation and Heritage range should be 700 mm to 800 mm above the cooking surface. When a rangehood is in a galley or partially enclosed kitchen, the rangehood can be higher at 900 mm to 1000 mm. For island situations they should not be above 800 mm as movement around the bench will result in fumes being drawn out from the catchment area of the rangehood. We have a model, the Thermidor which is installed in the ceiling and is higher than the recommendation. This is for aesthetic reasons such as a view or window setting. The rangehood is fitted with three fans to provide the necessary air movement. The Executive Range can be installed at 600mm above the trivets of a gas hotplate, over an induction cooktop the minimum should be 750mm. 1. The installation of QASAIR Rangehoods must comply with the information in this booklet. QASAIR Rangehoods are designed and made to work efficiently over all domestic cookware available on the Australian market. 2. Every QASAIR Rangehood must be ducted to the outside atmosphere by the use of zinc-alume duct or non-porous and non-flammable materials. Do not use of any type of flexible ducting or plastic PVC piping. Rangehoods must not be vented into a wall cavity or a ceiling space. Externally ducting the rangehood prevents a build up of grease, which can be a fire risk. Ensure the external outlet vent does not restrict the airflow in any way, as this may result in reduced performance. 3. QASAIR Rangehoods must be ducted in duct work equivalent to the outlet of the rangehood ie: The cross sectional area of the rangehood outlet and the duct work must be equal. Do not reduce the duct size or have sharp bends. Enlarge the duct size if the duct is to run 6 metres or longer. Advice from CONDARI is available to ensure optimum performance. Always use nonflammable materials to minimise the risk of fire in the duct. 4. Ensure all ducting pieces are correctly fitted and sealed with either duct tape or silicone to ensure that fumes do not escape into the ceiling space and seep into living areas through vents or light fittings. The installation

4

Qasair Rangehoods Installation Instructions


and fitting of the rangehood should be done in such a way that will allow the unit to be removed if service is required. Additional costs incurred in the removal of wall tiles, damage to walls or bench tops are not covered by warranty. 5. Always adequately ventilate the room when the rangehood is in use at the same time as appliances burning gas or other fuels. 6. WARNING: Incorrect venting will result in additional noise and a reduction in efficiency. Exhaust air must not be discharged into any chimney or flue, which may carry combustible products from other sources. a) Do not discharge the air-flow from the rangehood into a flue used for exhausting fumes from burning gas or fuel; b) For cleaning purposes please refer to page 101 of installation instructions for stainless steel; c) If cleaning is not carried out in accordance with the instructions as listed on page 101, there may be an increased risk of fire; d) Some parts of the rangehood may become hot when cooking; e) This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety. 7. Do not flambĂŠ under the rangehood. 8. If the supply cord is damaged, an authorised service centre or licensed electrician must replace it. 9. NOTE: CONDARI recommend an air movement of between 1000 to 1400 cubic metres per hour over an indoor barbecue, depending on the length of the duct run. Ensure a twin motor unit is installed over indoor barbecues for optimum results. Barbecues should be positioned under the centre of the hood where the fans are mounted and not near the outer edges where leakage may occur. 10. The lights in the rangehoods are LED and come with a night light except for D400L-1 and SEN400L-1. 11. To reduce the risk of fixing screws coming in contact with live parts, do not drill or screw into the rangehood. Live wires are encapsulated where possible to prevent user contact. If necessary drill from the inside out and only through single sheet material. 12. QASAIR domestic rangehoods are not to be used over barbecues approved for outdoor use only, with a Mega Joule rating of 50mj and over. 13. CONDARI make a range of hoods specifically for outdoor barbecues in alfresco areas under the CONDOR name. 14. CONDARI can manufacture rangehoods to be used over commercial cookers in domestic applications.

Qasair Rangehoods Installation Instructions

5


INSTALLATION INSTRUCTIONS - EXECUTIVE RANGE CUTOUT DIMENSIONS MODEL

6

HOOD SIZE

BASE SIZE

CUT OUT DIMENSION

CON 60L

243 x 580

280 x 600

258 x 585

CON 80L

243 x 780

280 x 800

258 x 785

NDCH 90L

243 x 880

280 x 900

258 x 885

NDCH 100L

243 x 980

280 x 1000

258 x 985

NDCH 120L

243 x 1180

280 x 1200

258 x 1185

LIS 500L

390 x 480

430 x 500

400 x 485

LIS 800L

390 x 780

430 x 800

400 x 785

LIS 900L

390 x 870

430 x 900

400 x 885

LIS 1000L

390 x 980

430 x 1000

400 x 985

LIS 1200L

390 x 1180

430 x 1200

400 x 1185

LIS 1500L

390 x 1480

430 x 1500

400 x 1485

WES 60L / EAS 60L

290 x 565

330 x 600

300 x 570

WES 80L / EAS 80L

290 x 780

330 x 800

300 x 785

WES 90L / EAS 90L

290 x 880

330 x 900

300 x 885

WES 100L / EAS 100L

290 x 980

330 x 1000

300 x 985

WCV 1000L

560 x 980

600 x 1000

570 x 985

WCV 1300L

560 x 1280

600 x 1300

570 x 1285

WCV 1600L

560 x 1580

600 x 1600

570 x 1585

WCV 1800L

560 x 1780

600 x 1800

570 x 1785

ECH 600L / ETN 600L

340 x 580

380 x 600

355 x 585

ECH 800L

340 x 780

380 x 800

355 x 785

ECH 900L / ETN 900L

340 x 880

380 x 900

355 x 885

ECH 1000L

340 x 980

380 x 1000

355 x 985

ECH 1200L

340 x 1180

380 x 1200

355 x 1185

Qasair Rangehoods Installation Instructions


DUCT DIRECTION CHANGE INSTRUCTIONS Before installing your rangehood check whether it has the fan mounted for back or top ducting. For top ducting, the unit will have the air outlet at the top, and for back ducting, the unit will have the air outlet at the back. To change from top to back or back to top, proceed as follows:

Duct direction for ECH, ETN, NDCH and CON models

The motor shown is fitted to the back plate (P) and this plate is attached to the hood by screws (S). To change from top to back, remove the filters, unplug fan(s). Undo all the screw (S), carefully remove the plate and turn it around so the motor points out the way required. Fit and reconnect the fan(s), and fit all the screws again and tighten.

Duct direction for LIS / FA / MT / MC / EAS and WES To change the duct direction, proceed as follows: 1. Remove the screws from the fan access panel and remove access panel (for MT and MC models only). 2. Disconnect fan(s). 3. Unscrew the 2 x 7mm screws (B) fixing the fan to the hood. Remove fan entirely. Repeat for each fan. 4. Rotate the fan assembly and re-install so that the air outlet meets with the rangehood outlet hole through which you are going to vent (top or back). 5. Replace the 2 x 7mm screws holding each fan. 6. Reconnect the fan(s) 7. Refit the fan access panel (for MT, EAS and WES models only).

LIS model – Rear duct

Qasair Rangehoods Installation Instructions

7


INSTALLATION INSTRUCTIONS • MT • MC

Installation must be carried out by the procedure outlined. Failure to do so may void the guarantee. Electrical: Wiring to the appliance must comply with State and local Regulations. Connection to be carried out by a registered electrician.

1. 2. 3. 4. 5. 6.

Fit a shelf at 410mm from the base of the cupboard. Note hinge location prior to drilling. Work from the centre line mark and drill 4 x M5 to M8 holes. For top ducted models, cut out hole for the ducting allow 20mm clearance. Fix left and right hand mounting brackets (supplied) 145mm from the base of the cupboard flush with the rear of the unit. Notch to the back. Lift rangehood onto mounting brackets by holding either end. DO NOT use the slide mechanism as this may cause damage. 7. Insert the 4 x 50mm pan head screws supplied through the shelf and into the rangehood. Turn clockwise to level the rangehood. 8. Fix the rangehood position by inserting 2 x no 8 1/2 inch screws through the left and right hand brackets. 9. Fit doors. 10. Minor adjustments may be required on the rangehood handle. Loosen the screws on the rear of the handle and adjust handle position and re- tighten. The rangehood handle can be replaced. 11. All of the rangehoods shown on pages 1 and 8 are supplied with a 10AMP plug and lead for connection to a 10AMP GPO, which must be in an accessible position. 12. The handle can be removed and replaced with one made by the cabinet maker to fit in with the kitchen cabinets. The MT 90 has 3 screws and the MT 60 has 2 screws. These can be accessed by sliding the facia out and un-screwing the front from underneath and behind the facia. The handle will come off by tilting it forward from the top.

8

Qasair Rangehoods Installation Instructions


Mini Trim Technical Specification Sheet MT

MINI TRIM - MT

Slide Out

Power entry location is the same for all MT models.

0 1 5 1 5 2 0 2

0 2 0 1 1 5 9 3

8 3

0 2 1 0 2

0 7 1

5 7 2 This view is shown with slide out trim in closed position.

Model

Motor Qty

MT 90L-1

600mm

900mm

Filter Size

518mm

518mm

Conversion Top/Back Back/Top

1

1

LED Light

Cool

Cool

Nightlight

YES

YES

Light Qty

1

2

N/A

320mm

1

2

Light Centres Filter Qty

Model

Electrical Connection Minimum Height (H =) Maximum Height (H =) PowderKote ď ˝ Available All-thread Fixing Centres Corner Type Condari Pty Ltd.

Qasair Rangehoods Installation Instructions

MT 60L-1 514mm

MT 90L-1 407mm

m m 7 7 1 x

Motor Box / Flue Width

MT 60L-1

m m 7 7 1 x

Body Width

YES

YES

10 Amp Lead

10 Amp Lead

N/A

N/A

N/A

N/A

N/A

N/A

N/A

N/A

Square

Square

Version: B 03/12/2014F Page 1 of 1

9


Marcel Technical Specification Sheet MC

MARCEL - MC

Slide Out

0 1 5 1 5 2 0 2

0 2 0 1 1 5 5 4

0 0 1

9 7 1 0 2

0 7 1

5 7 2

This view is shown with slide out trim in closed position.

Power Entry

Model

Motor Box / Flue Width

1000mm

Filter Size

918mm

Conversion Top/Back Back/Top

Motor Qty

2

LED Light

Cool

Nightlight

YES

Light Qty

2

Light Centres Filter Qty

Model

320mm 2

Electrical Connection Minimum Height (H =) Maximum Height (H =) PowderKote ď ˝ Available All-thread Fixing Centres Corner Type

10

457mm

YES 10 Amp Lead N/A N/A N/A N/A

Square Version: B 03/12/2014

F

Condari Pty Ltd.

MC 1000L-2 m m 7 7 1 x

Body Width

MC 1000L-2

Page 1 of 1

Qasair Rangehoods Installation Instructions


INSTALLATION INSTRUCTIONS • FA

Installation must be carried out by the procedure outlined. Failure to do so may void the guarantee. Electrical: Wiring to the appliance must comply with State and local Regulations. Connection to be carried out by a registered electrician.

1. The rangehood is designed to be fitted within joinery and can be installed by inserting screws in the three holes provided on each side, or to the top or back by drilling your own mounting holes as required. 2. When installed, cover the access holes to the side fixing screws with the plastic plugs supplied. 3. Fit filters. 4. Install front panel to suit as per your kitchen design.

Qasair Rangehoods Installation Instructions

11


Foldaway Technical Specification Sheet Undercupboard

FA

FOLDAWAY - FA

Power Entry

0 1 1 0 2

0 2

0 1

0 1 1

4 4 4

0 5 4 0 0 2

0 0 3 .

This view is shown with door in closed position

Power Entry

Model

598mm

898mm

898mm

573.4mm

873.4mm

873.4mm

1

1

2

LED Light

Cool

Cool

Cool

Nightlight

YES

YES

YES

Light Qty

1

2

2

Centre

350mm

350mm

2

2

2

Light Centres Filter Qty

Model Filter Size Conversion Top/Back Back/Top Electrical Connection Minimum Height (H =) Maximum Height (H =) PowderKote ď ˝ Available All-thread Fixing Centres Corner Type Condari Pty Ltd.

12

FA 60L-1 274mm

FA 90L-1 424mm

FA 90L-2 424mm

m m 0 9 2 x

Motor Qty

FA 90L-2

m m 0 9 2 x

Door Width

FA 90L-1

m m 0 9 2 x

Body Width

FA 60L-1

YES

YES

YES

10 Amp Lead

10 Amp Lead

10 Amp Lead

N/A

N/A

N/A

N/A

N/A

N/A

N/A

N/A

N/A

N/A

N/A

N/A

Square

Square

Square

Version: B 03/12/2014F

Page 1 of 1

Qasair Rangehoods Installation Instructions


INSTALLATION INSTRUCTIONS • CON • NDCH • LIS • ECH • ETN 1. 2. 3. 4. 5. 6. 7.

Installation must be carried out by the procedure outlined. Failure to do so may void the guarantee. Electrical: Wiring to the appliance must comply with State and local Regulations. Connection to be carried out by a registered electrician.

Loosen screws A and B by turning anti-clockwise. Turn screw ‘D’ anti-clockwise to extend the outer spring bracket. Insert rangehood into cut out and turn screw ‘C’ clockwise to align rangehood with cupboard base. Do not over tighten. Tighten screw ‘A’ by turning clockwise to lock fixing bracket. Fit off ductwork as required. To remove rangehood, turn screw ‘D’ clockwise.

RANGEHOOD SPRING BRACKETS ETN ECH NDCH Models:

LIS CON Models:

6

5

4

3

2

1

D

D

C

C

B

B

Cupboard

A Qasair Rangehoods Installation Instructions

Front of Rangehood

A

13


Conley Technical Specification Sheet Undercupboard

CON

CONLEY - CON

Power Entry

0 1 0 1 4 2 0 1

0 1 0 1 1

0 6 3

2 1 0 8 2 Power Entry

Model

600mm

800mm

800mm

Filter Size

780mm

Conversion Top/Back Back/Top

580mm

780mm

Motor Qty

1

1

2

LED Light

Cool

Cool

Cool

Nightlight

YES

YES

YES

Light Qty

1

2

2

Centre

379mm

379mm

2

2

2

Light Centres Filter Qty

Model

Electrical Connection Minimum Height (H =) Maximum Height (H =) PowderKote ď ˝ Available All-thread Fixing Centres Corner Type

14

269mm

CON 80L-1 379mm

CON 80L-2 379mm

YES

YES

YES

10 Amp Lead

10 Amp Lead

10 Amp Lead

N/A

N/A

N/A

N/A

N/A

N/A

N/A

N/A

N/A

N/A

N/A

N/A

Square

Square

Square

Version: A 01/07/2014

F

Condari Pty Ltd.

CON 60L-1

m m 7 5 1 x

CON 80L-2

m m 7 5 1 x

Motor Box / Flue Width

CON 80L-1

m m 0 5 2 x

Body Width

CON 60L-1

Page 1 of 1

Qasair Rangehoods Installation Instructions


Undermount Technical Specification Sheet Undercupboard

NDCH

UNDERMOUNT - NDCH

Power entry location is the same for all NDCH models.

0 1 0 1 4 2 0 1

0 1

0 6 3

0 1 1 2 1 0 8 2

Model

Motor Qty

900mm

900mm

Filter Size

880mm

880mm

Conversion Top/Back Back/Top

1

2

LED Light

Cool

Cool

Nightlight

YES

YES

Light Qty

2

2

770mm

770mm

2

2

Light Centres Filter Qty

Model

Electrical Connection Minimum Height (H =) Maximum Height (H =) PowderKote ď ˝ Available All-thread Fixing Centres Corner Type Condari Pty Ltd.

Qasair Rangehoods Installation Instructions

NDCH 90L-1 340mm

NDCH 90L-2 340mm

m m 0 6 2 x

Motor Box / Flue Width

NDCH 90L-2

m m 0 6 2 x

Body Width

NDCH 90L-1

YES

YES

10 Amp Lead

10 Amp Lead

N/A

N/A

N/A

N/A

N/A

N/A

N/A

N/A

Square

Square

Version: B 19/12/2014F Page 1 of 2

15


Undermount Technical Specification Sheet Undercupboard

NDCH

UNDERMOUNT - NDCH

Power entry location is the same for all NDCH models.

0 4 2 0 1 1 0 1

0 1

0 6 3

0 1 1 2 1 0 8 2

Model

Motor Qty

1000mm

1200mm

Filter Size

980mm

1180mm

Conversion Top/Back Back/Top

2

2

LED Light

Cool

Cool

Nightlight

YES

YES

Light Qty

2

2

860mm

1060mm

2

2

Light Centres Filter Qty

Model

Electrical Connection Minimum Height (H =) Maximum Height (H =) PowderKote ď ˝ Available All-thread Fixing Centres Corner Type Condari Pty Ltd.

16

NDCH 100L-2 379mm

NDCH 120L-2 479mm

m m 0 6 2 x

Motor Box / Flue Width

NDCH 120L-2

m m 0 6 2 x

Body Width

NDCH 100L-2

YES

YES

10 Amp Lead

10 Amp Lead

N/A

N/A

N/A

N/A

N/A

N/A

N/A

N/A

Square

Square

Version: B 19/12/2014F Page 2 of 2

Qasair Rangehoods Installation Instructions


Lismore Technical Specification Sheet Undercupboard

LIS

LISMORE - LIS

Power entry location is the same for all LIS models.

0 5 1 1 1 3 0 2

0 2 0 1 1 0 0 4

0 5 1 5 7

2 1 0 2

0 2 0 0 9 3 3 4

Model

500mm

800mm

800mm

Filter Size

780mm

Conversion Top/Back Back/Top

480mm

780mm

Motor Qty

1

1

2

LED Light

Cool

Cool

Cool

Nightlight

YES

YES

YES

Light Qty

1

2

2

Centre

380mm

380mm

1

2

2

Light Centres Filter Qty

Model

Electrical Connection Minimum Height (H =) Maximum Height (H =) PowderKote ď ˝ Available All-thread Fixing Centres Corner Type Condari Pty Ltd.

Qasair Rangehoods Installation Instructions

LIS 500L-1 459mm

LIS 800L-1 379mm

LIS 800L-2 379mm

m m 0 9 2 x

LIS 800L-2

m m 0 9 2 x

Motor Box / Flue Width

LIS 800L-1

m m 0 9 2 x

Body Width

LIS 500L-1

YES

YES

YES

10 Amp Lead

10 Amp Lead

10 Amp Lead

N/A

N/A

N/A

N/A

N/A

N/A

N/A

N/A

N/A

N/A

N/A

N/A

Square

Square

Square

Version: B 03/12/2014F

Page 1 of 3

17


Lismore Technical Specification Sheet Undercupboard

LIS

LISMORE - LIS

Power entry location is the same for all LIS models.

0 1 0 5 1 2 1 3

0 2 0 1 1 0 0 4

0 5 1 5 7

2 1 0 2

0 2 00 93 34

Model

900mm

1000mm

Filter Size

980mm

Conversion Top/Back Back/Top

870mm

Motor Qty

2

2

LED Light

Cool

Cool

Nightlight

YES

YES

Light Qty

2

2

424mm

480mm

2

2

Light Centres Filter Qty

Model

Electrical Connection Minimum Height (H =) Maximum Height (H =) PowderKote ď ˝ Available All-thread Fixing Centres Corner Type Condari Pty Ltd.

18

LIS 900L-2 424mm

LIS 1000L-2 479mm

m m 0 9 2 x

Motor Box / Flue Width

LIS 1000L-2

m m 0 9 2 x

Body Width

LIS 900L-2

YES

YES

10 Amp Lead

10 Amp Lead

N/A

N/A

N/A

N/A

N/A

N/A

N/A

N/A

Square

Square

Version: B 03/12/2014F Page 2 of 3

Qasair Rangehoods Installation Instructions


Lismore Technical Specification Sheet Undercupboard

LIS

LISMORE - LIS

Power entry location is the same for all LIS models.

00 5 12 1 1 3

0 2 0 1 1 0 0 4

0 5 1 5 7

2 1 0 2

0 2 00 93 34

Model

1200mm

1200mm

1500mm

Filter Size Conversion Top/Back Back/Top

1180mm

1180mm

1480mm

2

3

3

LED Light

Cool

Cool

Cool

Nightlight

YES

YES

YES

Light Qty

2

2

3

580mm

580mm

452mm

4

4

4

Light Centres Filter Qty

Model

Electrical Connection Minimum Height (H =) Maximum Height (H =) PowderKote ď ˝ Available All-thread Fixing Centres Corner Type Condari Pty Ltd.

Qasair Rangehoods Installation Instructions

LIS 1200L-2 290mm

LIS 1500L-3

LIS 1200L-3 290mm

365mm

m m 0 9 2 x

Motor Qty

LIS 1500L-3

m m 0 9 2 x

Motor Box / Flue Width

LIS 1200L-3

m m 0 9 2 x

Body Width

LIS 1200L-2

YES

YES

YES

10 Amp Lead

10 Amp Lead

10 Amp Lead

N/A

N/A

N/A

N/A

N/A

N/A

N/A

N/A

N/A

N/A

N/A

N/A

Square

Square

Square

Version: B 03/12/2014F

Page 3 of 3

19


Eaton Technical Specification Sheet Undercupboard

ETN

EATON - ETN

Power entry location is the same for all ECH models.

00 41 31 0 1

0 1

0 9 2

0 1 2 1 1 0 8 3

Model

600mm

900mm

900mm

Filter Size

880mm

Conversion Top/Back Back/Top

580mm

880mm

Motor Qty

1

1

2

LED Light

Cool

Cool

Cool

Nightlight

YES

YES

YES

Light Qty

2

2

2

520mm

800mm

800mm

1

2

2

Light Centres Filter Qty

Electrical Connection Minimum Height (H =) Maximum Height (H =) PowderKote ď ˝ Available All-thread Fixing Centres Corner Type Condari Pty Ltd.

20

ETN 600L-1 479mm

ETN 900L-1 379mm

ETN 900L-2 379mm

m m 0 9 2 x

ETN 900L-2

m m 0 9 2 x

Motor Box / Flue Width

ETN 900L-1

m m 0 9 2 x

Body Width

Model

ETN 600L-1

YES

YES

YES

10 Amp Lead

10 Amp Lead

10 Amp Lead

N/A

N/A

N/A

N/A

N/A

N/A

N/A

N/A

N/A

N/A

N/A

N/A

Square

Square

Square

Version: B 12/05/2015F

Page 1 of 1

Qasair Rangehoods Installation Instructions


ECH Technical Specification Sheet Undercupboard

ECH

ECH

Power entry location is the same for all ECH models.

0 4 3 0 1

0 0 1 1 1

0 1 1

0 9 2

2 1

0 8 3

Model

600mm

800mm

800mm

Filter Size

780mm

Conversion Top/Back Back/Top

580mm

780mm

Motor Qty

1

1

2

LED Light

Cool

Cool

Cool

Nightlight

YES

YES

YES

Light Qty

2

2

2

521mm

721mm

721mm

1

2

2

Light Centres Filter Qty

Model

Electrical Connection Minimum Height (H =) Maximum Height (H =) PowderKote ď ˝ Available All-thread Fixing Centres Corner Type Condari Pty Ltd.

Qasair Rangehoods Installation Instructions

ECH 600L-1 479mm

ECH 800L-1 340mm

ECH 800L-2 340mm

m m 0 9 2 x

ECH 800L-2

m m 0 9 2 x

Motor Box / Flue Width

ECH 800L-1

m m 0 9 2 x

Body Width

ECH 600L-1

YES

YES

YES

10 Amp Lead

10 Amp Lead

10 Amp Lead

N/A

N/A

N/A

N/A

N/A

N/A

N/A

N/A

N/A

N/A

N/A

N/A

Square

Square

Square

Version: A 10/04/2014

Page 1 of 3

21


ECH Technical Specification Sheet Undercupboard

ECH

ECH

Power entry location is the same for all ECH models.

0 4 3 0 1 00 11 1 0 1 1

0 9 2

2 1

0 8 3

Model

900mm

900mm

Filter Size

880mm

Conversion Top/Back Back/Top

880mm

Motor Qty

1

2

LED Light

Cool

Cool

Nightlight

YES

YES

Light Qty

2

2

800mm

800mm

2

2

Light Centres Filter Qty

22

Model

Electrical Connection Minimum Height (H =) Maximum Height (H =) PowderKote ď ˝ Available All-thread Fixing Centres Corner Type Condari Pty Ltd.

ECH 900L-1 379mm

ECH 900L-2 379mm

m m 0 9 2 x

Motor Box / Flue Width

ECH 900L-2

m m 0 9 2 x

Body Width

ECH 900L-1

YES

YES

10 Amp Lead

10 Amp Lead

N/A

N/A

N/A

N/A

N/A

N/A

N/A

N/A

Square

Square

Version: A 10/04/2014

Page 2 of 3

Qasair Rangehoods Installation Instructions


ECH Technical Specification Sheet Undercupboard

ECH

ECH

Power entry location is the same for all ECH models.

0 4 3 0 1 00 11 1 0 1 1

0 9 2

2 1

0 8 3

ECH 1000L-2

ECH 1200L-2

ECH 1200L-3

Body Width

1000mm

1200mm

1200mm

Filter Size

Motor Box / Flue Width

980mm

1180mm

1180mm

Conversion Top/Back Back/Top

2

2

3

Model

Motor Qty LED Light

Cool

Cool

Cool

Nightlight

YES

YES

YES

Light Qty

2

2

2

911mm

1061mm

1061mm

3

3

3

Light Centres Filter Qty

Qasair Rangehoods Installation Instructions

Model

Electrical Connection Minimum Height (H =) Maximum Height (H =) PowderKote ď ˝ Available All-thread Fixing Centres Corner Type Condari Pty Ltd.

ECH 1000L-2

ECH 1200L-2

ECH 1200L-3

290mm x 290mm 340mm x 290mm 340mm x 290mm

YES

YES

YES

10 Amp Lead

10 Amp Lead

10 Amp Lead

N/A

N/A

N/A

N/A

N/A

N/A

N/A

N/A

N/A

N/A

N/A

N/A

Square

Square

Square

Version: A 10/04/2014

Page 3 of 3

23


INSTALLATION INSTRUCTIONS • WCV

Installation must be carried out by the procedure outlined. Failure to do so may void the guarantee. Electrical: Wiring to the appliance must comply with State and local Regulations. Connection to be carried out by a registered electrician.

Installation Instructions Installation Instructions

All the rangehoods are supplied as Top ducted and can be Side or Back ducted through separate ducting pieces. Side ducting can be either Left or Right.

When being installed over a gas cooker with an open flame griller the filters must be 1200 mm above the cooking surface. In these cases, it may be necessary to have remote switching as the switches on the rangehood may be out of reach.

WCV1000L-2 WCV1300L-3 WCV1000L-2 WCV1300L-3 WCV1600L-3 WCV1800L-3

WCV1600L-3

WCV1800L-3

Please refer to Gas Installation Code AG 601 – 2002.

1. 2. 3. 4. 5.

Unplug power cable ‘A’ and fan cables. Remove screws ‘B’ and remove Cutout Dimensions - inner section of rangehood. Loosen screws ‘C’ & ‘D’ by turning WCV1000L-2 985 x anti-clockwise. 568 Turn screwCutout ‘F’ anti-clockwise to extend the spring Dimensions - bracket. WCV1300L-3 1285into x 568 Insert outer shell of rangehood cutout and turn screw ‘E’ clockwise to align rangehood with cupboard base. Be WCV1000L-2 985 x 568 WCV1600L-3 1585 x 568 sure that the spring bracket has engaged with the cabinet panel before tightening ‘E’. 6. DoWCV1800L-3 not overWCV1300L-3 tighten. 1285 x 568 1785 x 568 7. Tighten screw ‘C’ by turning clockwise to lock fixing bracket. WCV1600L-3 1585 x 568 8. Refit inner section of rangehood with screws ‘B’. 1785 x cables. 568 9. Plug powerWCV1800L-3 cable ‘A’ into it’s socket and in in fan 10. Fit off ductwork as required. 11. To remove rangehood repeat points 1 & 2 loosen screw ‘C’, turn screw ‘F’ clockwise.

C D E

C D

4

3

F

2

1

E

D

F

B A C

B 1. 2. 3. 4. Cupboard

24

5. 6. 7. 8. 9.

Unplug power cable A and fan cables. Remove screws B and remove inner section of rangehood. A Loosen screws C & D by turning anti-clockwise. Insert outer shell of rangehood into cutout and turn screw E clockwise B to align rangehood with cupboard base. Do not over tighten this screw. Front of Rangehood Tighten C by turning clockwise to fan lockcables. fixing bracket. 1. screw Unplug power cable A and with screws B. Refit 2. inner section of rangehood Remove screws B and remove inner section of rangehood. Plug power cable A into it's socket and plug in fan cables. Qasair Rangehoods Installation Instructions 3. Loosen screws C & D by turning anti-clockwise. Fit off duct work as required. A


COBAR Technical Specification Sheet Undercupboard

WCV

COBAR - WCV

Power entry location is the same for all Cobar models.

0 4 3 0 1 1

0 3 0 2 0 0 5

0 8 2

2 1 00 60 56

Model

1000mm

1300mm

Filter Size

1280mm

Top Ducted Conversion: Back , Side

YES

YES

Electrical Connection

10 Amp Lead

10 Amp Lead

N/A

N/A

N/A

N/A

N/A

N/A

980mm

Motor Qty

2

3

LED Light

Cool

Cool

Nightlight

YES

YES

Light Qty

4

4

580mm

580mm

Light Centres Filter Qty

3

4

Model

Minimum Height (H =) Maximum Height (H =) PowderKote ď ˝ Available All-thread Fixing Centres Corner Type Condari Pty Ltd.

Qasair Rangehoods Installation Instructions

WCV 1000L-2 290mm

WCV 1300L-3 290mm

m m 2 2 4 x

Motor Box / Flue Width

WCV 1300L-3

m m 2 2 4 x

Body Width

WCV 1000L-2

N/A

N/A

Square

Square

Version: A 13/11/2014F Page 1 of 3

25


COBAR Technical Specification Sheet Undercupboard

WCV

COBAR - WCV

Power entry location is the same for all Cobar models.

0 4 3 0 1 1

0 3 0 2 0 0 5

0 8 2

2 1 00 60 56

Model

Motor Qty

WCV 1800L-3

1600mm

1800mm

Filter Size

1580mm

1780mm

Top Ducted Conversion: Back , Side

YES

YES

3

3

Electrical Connection

10 Amp Lead

10 Amp Lead

N/A

N/A

N/A

N/A

N/A

N/A

N/A

N/A

Square

Square

LED Light

Cool

Cool

Nightlight

YES

YES

Light Qty

4

4

872mm

816mm

5

6

Light Centres Filter Qty

Model

Minimum Height (H =) Maximum Height (H =) PowderKote ď ˝ Available All-thread Fixing Centres Corner Type Condari Pty Ltd.

26

WCV 1600L-3 290mm

272mm

m m 2 2 4 x

Motor Box / Flue Width

WCV 1800L-3

WCV 1600L-3

m m 2 2 4 x

Body Width

Version: A 13/11/2014F Page 2 of 3

Qasair Rangehoods Installation Instructions


COBAR Technical Specification Sheet Undercupboard

WCV

COBAR - WCV

BACK DUCTED PIECES WCV B2

WCV B3

5 1

0 41 21

0 1 1

0 5 1

5 2

8 3 1

SIDE DUCTED PIECES WCV S2

WCV S3

T 3 S V C W

Ducted Pieces

Qasair Rangehoods Installation Instructions

Condari Pty Ltd.

Version: A 13/11/2014F Page 3 of 3

27


INSTALLATION INSTRUCTIONS • WES • EAS 1. 2. 3. 4. 5. 6. 7.

Installation must be carried out by the procedure outlined. Failure to do so may void the guarantee. Electrical: Wiring to the appliance must comply with State and local Regulations. Connection to be carried out by a registered electrician.

Loosen screws A and B by turning anti-clockwise. Turn ‘D’ anti-clockwise to extend the outer spring bracket. Insert rangehood into cut out and turn screw ‘C’ clockwise to align rangehood with cupboard base. Do not over tighten. Tighten screw ‘A’ by turning clockwise to lock fixing bracket. Fit off ductwork as required. To remove rangehood, turn screw ‘D’ clockwise.

RANGEHOOD SPRING BRACKETS WES

Model:

EAS

Model:

A

A

B

B

C D

C D

6

5

4

3

2

1

D

D

E

EASTMORE

C

C

B

B

Cupboard

Front of Rangehood

A

A

6

28

5

4

3

2

1

Qasair Rangehoods Installation Instructions


Eastmore Technical Specification Sheet Undercupboard

EAS

EASTMORE - EAS

Power entry location is the same for all EAS models. Motor Access Panel

0 1 01 9 2

0 2 0 2 0 1 1

0 7 5 R E5 T2 L2 I F

2 R 1 E0 T3 L3 I F 0 3 3 Motor Access Panel

Model

Motor Qty

600mm

800mm

Filter Size

565mm

780mm

Conversion Top/Back Back/Top

1

2

LED Light

Cool

Cool

Nightlight

YES

YES

Light Qty

2

2

300mm

380mm

Light Centres Filter Qty

2

2

Model

Electrical Connection Minimum Height (H =) Maximum Height (H =) PowderKote ď ˝ Available All-thread Fixing Centres Corner Type

Qasair Rangehoods Installation Instructions

272mm

EAS 80L-2 379mm

YES

YES

10 Amp Lead

10 Amp Lead

N/A

N/A

N/A

N/A

N/A

N/A

N/A

N/A

Square

Square

Version: B 02/12/2014

F

Condari Pty Ltd.

EAS 60L-1

m m 0 6 2 x

Motor Box / Flue Width

EAS 80L-2

m m 2 7 2 x

Body Width

EAS 60L-1

Page 1 of 2

29


Eastmore Technical Specification Sheet Undercupboard

EAS

EASTMORE - EAS

Power entry location is the same for all EAS models.

Motor Access Panel

0 1 0 1 9 2

0 2 0 2 0 1 1

0 7 5 R E5 T2 L2 I F

2 R 1 E0 T3 L3 I F 0 3 3 Motor Access Panel

Model

900mm

1000mm

Filter Size

880mm

980mm

Conversion Top/Back Back/Top

2

2

LED Light

Cool

Cool

Nightlight

YES

YES

Light Qty

2

2

430mm

480mm

Light Centres Filter Qty

2

2

Model

Electrical Connection Minimum Height (H =) Maximum Height (H =) PowderKote ď ˝ Available All-thread Fixing Centres Corner Type Condari Pty Ltd.

30

EAS 90L-2 429mm

EAS 100L-2 479mm

m m 0 6 2 x

Motor Qty

EAS 100L-2

m m 0 6 2 x

Body Width Motor Box / Flue Width

EAS 90L-2

YES

YES

10 Amp Lead

10 Amp Lead

N/A

N/A

N/A

N/A

N/A

N/A

N/A

N/A

Square

Square

Version: B 02/12/2014F Page 2 of 2

Qasair Rangehoods Installation Instructions


Westmore Technical Specification Sheet Undercupboard

WES

WESTMORE - WES

Power entry location is the same for all WES models. Motor Access Panel

0 1 0 1 9 2

0 2 0 2 0 1 1

0 5 4

R E T0 L6 I F R E5 T4 L1 I F

0 3 3

2 1

Motor Access Panel

Model

Motor Qty

WES 80L-2

600mm

800mm

Filter Size

565mm

780mm

Conversion Top/Back Back/Top

1

2

LED Light

Cool

Cool

Nightlight

YES

YES

Light Qty

2

2

300mm

380mm

2

2

Light Centres Filter Qty

Model

Electrical Connection Minimum Height (H =) Maximum Height (H =) PowderKote ď ˝ Available All-thread Fixing Centres Corner Type Condari Pty Ltd.

Qasair Rangehoods Installation Instructions

WES 60L-1 272mm

WES 80L-2 379mm

m m 0 6 2 x

Motor Box / Flue Width

WES 60L-1

m m 2 7 2 x

Body Width

YES

YES

10 Amp Lead

10 Amp Lead

N/A

N/A

N/A

N/A

N/A

N/A

N/A

N/A

Square

Square

Version: B 03/12/2014F Page 1 of 2

31


Westmore Technical Specification Sheet Undercupboard

WES

WESTMORE - WES

Power entry location is the same for all WES models.

Motor Access Panel

0 1 0 1 9 2

0 2 0 2 0 1 1

0 5 4

R E T0 L6 I F R E5 T4 L1 I F

0 3 3

2 1

Motor Access Panel

Model

Motor Qty

WES 100L-2

900mm

1000mm

Filter Size

980mm

Conversion Top/Back Back/Top

880mm 2

2

LED Light

Cool

Cool

Nightlight

YES

YES

Light Qty

2

2

430mm

480mm

2

2

Light Centres Filter Qty

Model

Electrical Connection Minimum Height (H =) Maximum Height (H =) PowderKote ď ˝ Available All-thread Fixing Centres Corner Type Condari Pty Ltd.

32

WES 90L-2 429mm

WES 100L-2 479mm

m m 0 6 2 x

Motor Box / Flue Width

WES 90L-2

m m 0 6 2 x

Body Width

YES

YES

10 Amp Lead

10 Amp Lead

N/A

N/A

N/A

N/A

N/A

N/A

N/A

N/A

Square

Square

Version: B 03/12/2014F Page 2 of 2

Qasair Rangehoods Installation Instructions


INSTALLATION INSTRUCTIONS • H SERIES • PYR Installation must be carried out by the procedure outlined. Failure to do so may void the guarantee. Electrical: Wiring to the appliance must comply with State and local Regulations. Connection to be carried out by a registered electrician.

Recommended fixing points

MOUNTING BRACKET • Use vertically punched slot for centre line • Before cutting any holes check ceiling space for structural beams. It may be possible at this point to relocate the hood position.

The fixing points are prepunched holes in the back of the hood and it may be necessary to drill through the back of the hood into the wall stud.

1. 2. 3. 4. 5.

Remove canopy and flue from boxes and check you have correct model and flue. Locate centre point of cooktop. Use level or plumb line to mark centre up to ceiling. Mark level line for base of canopy 700-800mm above bench 750mm desirable. Check roof space above for wires and obstructions as now is the time to decide on any changes to location due to immovable obstructions. 6. Mark flue size on ceiling and cut neat exact hole to pass flue through. 7. For rear ducted models cut hole in wall for vent to pass through. 8. Fix mounting bracket to wall at desired height. 9. Remove fan(s) from canopy by removing side fixing bolts and disconnecting electrical plug at flexible connector. 10. Locate solid fixing points on wall and drill holes in rear of canopy to suit. If no solid fixing is available then now is the time to install fixing points. Four points are recommended with one on each side at top and one on each side at bottom. 11. Drill hole in rear of unit to pass power connection through where available on wall. 12. Check flue slides through hole in ceiling. 13. Place canopy flat on floor and fit stainless flue over spigot pushing all the way down for a neat fit. Drill hole in rear of flue and fix to canopy with pop rivet or screw. 14. Carefully lift canopy into position, guiding flue through ceiling and feeding power cable through hole in rear of canopy. Make sure canopy is sitting correctly on mounting bracket then fix to wall through fixing holes with solid screws. (You may need to place a packer behind canopy if wall is bowed to make the canopy sit correctly). 15. Complete electrical connection to 10 AMP junction box to local electrical authority regulations ensuring power is turned off during work. 16. Fit ducting to outside or exterior wall vent for rear ducted models. (Seal rear vents onto rear of hood with silicone). A plumber should seal roof penetration with appropriate flashing. All joins in ducting need to be sealed with duct tape or silicone and only use approved ducting of the correct size for your canopy. 17. Fit motor(s) back into canopy with fixing bolts and plug electrical connector in. 18. Test run hood.

Qasair Rangehoods Installation Instructions

33


Heritage Technical Specification Sheet H

HERITAGE - H

Wall Mounted

6 0 1

: s h t g n e L e l b a l i a v A m m 0 0 6 E L D m m 0 0 9 E L D m m 0 0 3 : t h g i e H m u m i n i M

m m 0 0 2 1 E L D

m m 0 0 8 1 : t h g i e H m u m i x a M

m m 0 0 5 1 E L D

0 3

0 0 3 0 1 1 0 0 5

0 5 1 900HL-1

Model

Body Width

600mm

700mm

900mm

Filter Size Conversion Top/Back Back/Top

Motor Box / Flue Width

240mm

240mm

240mm

Motor Qty

1

1

1

LED Light

Cool

Cool

Cool

Nightlight

YES

YES

YES

Light Qty

2

2

2

310mm

310mm

510mm

2

2

3

Light Centres Filter Qty

272mm

290mm

900HL-1 272mm

NO

NO

NO

Junction Box

Junction Box

Junction Box

Power Entry Vertical

150mm

130mm

150mm

Power Entry Horizontal

125mm

135mm

210mm

PowderKote ď ˝ Available

YES

YES

YES

Outlet Spacing

N/A

N/A

N/A

Square

Square

Square

Electrical Connection

Corner Type Condari Pty Ltd.

34

700HL-1

600HL-1

m m 5 5 3 x

700HL-1

m m 5 5 3 x

600HL-1

m m 5 5 3 x

Model

Version: C 20/01/2015F

Page 1 of 2

Qasair Rangehoods Installation Instructions


Heritage Technical Specification Sheet H

HERITAGE - H

Wall Mounted

0 5 1

: s h t g n e L e l b a l i a v A m m 0 0 6 2 E L D m m 0 0 9 2 E L D m m 5 7 3 : t h g i e H m u m i n i M

m m 0 0 2 1 2 E L D

m m 5 7 8 1 : t h g i e H m u m i x a M

m m 0 0 5 1 2 E L D

0 3

0 1 1 5 7 3 0 0 5

0 5 1 1500HL-2

Model

1000mm

1200mm

1500mm

Filter Size Conversion Top/Back Back/Top

Motor Box / Flue Width

370mm

370mm

370mm

Motor Qty

2

2

2

LED Light

Cool

Cool

Cool

Nightlight

YES

YES

YES

Light Qty Light Centres Filter Qty

290mm

1200HL-2 272mm

1500HL-2 272mm

NO

NO

NO

Junction Box

Junction Box

Junction Box

Power Entry Vertical

130mm

190mm

215mm

Power Entry Horizontal

Electrical Connection

2

2

2

PowderKote ď ˝ Available

510mm

648mm

816mm

Outlet Spacing

3

4

5

Corner Type Condari Pty Ltd.

Qasair Rangehoods Installation Instructions

1000HL-2

m m 5 5 3 x

1200HL-2

m m 5 5 3 x

1000HL-2

Body Width

m m 5 5 3 x

Model

150mm

250mm

375mm

YES

YES

YES

75mm

100mm

100mm

Square

Square

Square

Version: C 20/01/2015F

Page 2 of 2

35


Pyramid Technical Specification Sheet PYR

PYRAMID - PYR

Wall Mounted

0 1 1

y r t n E r e w o P 0 8 3

0 3

0 5 1 0 0 5 0 3 2 0 1 1

0 2 : s h t g n e L e l b a l i a v A m m 0 0 6 P L D m m 0 0 9 P L D m m 0 0 2 1 P L D m m 0 0 5 1 P L D

0 3

0 8 2 0 0 5

Model

Motor Box / Flue Width Motor Qty

900mm

Filter Size

270mm

Conversion Top/Back Back/Top

1

LED Light

Cool

Nightlight

YES

Light Qty

2

Light Centres Filter Qty

Model

510mm 3

Electrical Connection Minimum Height (H =) Maximum Height (H =) PowderKote ď ˝ Available All-thread Fixing Centres Corner Type Condari Pty Ltd.

36

PYR 900L-1 272mm

m m 5 5 3 x

Body Width

PYR 900L-1

NO Junction Box N/A N/A N/A N/A

Square Version: B 20/01/2015F

Page 1 of 1

Qasair Rangehoods Installation Instructions


INSTALLATION INSTRUCTIONS • 3F • ST • SEA • SMF • CM • STA / STAR / STF • IN (REMOTE SWITCHED) Installation must be carried out by the procedure outlined. Failure to do so may void the guarantee. Electrical: Wiring to the appliance must comply with State and local Regulations. Connection to be carried out by a registered electrician.

Recommended fixing points

1. 2. 3. 4. 5. 6.

Prepare wall by marking level line at desired height above cooktop. Plumb line from centre of cooktop to ceiling and mark flue cut out. Mark level line for base of canopy 700-800mm above bench 750mm desirable. Position mounting bracket on wall and fix with four screws. Cut a neat hole through the ceiling and remove any obstructing timbers. Note: Various offsets are available from your QASAIR dealer to duct around any major structural beams which cannot be removed. Ask your QASAIR dealer for advice. 7. In the case of back ducted models, cut a hole in the wall at the desired height. 8. Locate solid fixing point in wall to support hood. If there is no solid fixing point it will have to be placed in the wall before proceeding. QASAIR recommend at least four (4) fixing points. 9. Drill holes in back of unit at suitable fixing points. 10. Drill 20mm hole in the rear of unit for 240 volt power cable as close as possible to junction box or use hole below the junction box. 11. Attach flue (if applicable), then carefully lift into position on level line. Ensure flue is pushed into position and electrical cable is fed into rear of unit. 12. Duct in approved manner to outside atmosphere.

Qasair Rangehoods Installation Instructions

37


3 Flare Technical Specification Sheet 3F

3 FLARE - 3F

Wall Mounted

Power Entry

0 8 1

: s h t g n e L e l b a l i a v A m m 0 0 6 m m 0 0 9 m m 0 0 2 1

Ø15mm Radius

0 8

0 5 2

0 8 4

0 1 5

0 9

Power Entry

Ø

Ø15mm Radius

Flues made to order for back ducted models.

A Transition is supplied to suit standard DL2 ducting. Model

Motor Qty

900mm

1200mm

Filter Size

300mm

400mm

Conversion Top/Back Back/Top

2

2

LED Light

Cool

Cool

Nightlight

YES

YES

Light Qty

2

2

510mm

648mm

3

4

Light Centres Filter Qty

Model

Electrical Connection Minimum Height (H =) Maximum Height (H =) PowderKote  Available All-thread Fixing Centres Corner Type Condari Pty Ltd.

38

3F 900L-2 272mm

3F 1200L-2 272mm

m m 5 5 3 x

Motor Box / Flue Width

3F 1200L-2

m m 5 5 3 x

Body Width

3F 900L-2

NO

NO

Junction Box

Junction Box

480mm

480mm

1680mm

1680mm

YES

YES

N/A

N/A

Round

Round

Version: C 20/01/2015F Page 1 of 2

Qasair Rangehoods Installation Instructions


3 Flare Technical Specification Sheet 3F

3 FLARE - 3F

Wall Mounted

Power Entry

0 3 2

: s h t g n e L e l b a l i a v A m m 0 0 6 m m 0 0 9

Ø15mm Radius

m m 0 0 2 1 0 8

0 5 2

0 8 4

0 1 5

0 9

Power Entry

Model

Motor Qty

3F 1500L-3

1200mm

1500mm

Filter Size

450mm

500mm

Conversion Top/Back Back/Top

3

3

LED Light

Cool

Cool

Nightlight

YES

YES

Light Qty

2

2

648mm

816mm

4

5

Light Centres Filter Qty

Model

Electrical Connection Minimum Height (H =) Maximum Height (H =) PowderKote  Available All-thread Fixing Centres Corner Type Condari Pty Ltd.

Qasair Rangehoods Installation Instructions

3F 1200L-3 272mm

3F 1500L-3 272mm

m m 5 5 3 x

Motor Box / Flue Width

3F 1200L-3

m m 5 5 3 x

Body Width

. s l e d o m d e t c u d k c a b r o f r e d r o o t e d a m s e u l F

A Transition is supplied to suit standard DL3 ducting

.

Ø15mm Radius

NO

NO

Junction Box

Junction Box

480mm

480mm

1680mm

1680mm

YES

YES

N/A

N/A

Round

Round

Version: C 20/01/2015F Page 2 of 2

39


Step Technical Specification Sheet ST

STEP - ST

Wall Mounted

Power entry location is the same for all Step models.

0 4 1

0 0 2

Ø15mm Radius

H 9mm S-S rail.

0 5 3 0 2 1

0 1 5

Ø15mm Radius

Model

900mm

900mm

1200mm

Filter Size Conversion Top/Back Back/Top

400mm

400mm

400mm

1

2

2

LED Light

Cool

Cool

Cool

Nightlight

YES

YES

YES

Light Qty

2

2

2

510mm

510mm

648mm

3

3

4

Light Centres Filter Qty

Model

Electrical Connection Minimum Height (H =) Maximum Height (H =) PowderKote  Available All-thread Fixing Centres Corner Type Condari Pty Ltd.

40

ST 900L-1 272mm

ST 900L-2 272mm

ST 1200L-2 272mm

m m 5 5 3 x

Motor Qty

ST 1200L-2

m m 5 5 3 x

Motor Box / Flue Width

ST 900L-2

m m 5 5 3 x

Body Width

ST 900L-1

NO

NO

NO

Junction Box

Junction Box

Junction Box

Back Ducted 350mm Back Ducted 350mm Back Ducted 350mm Top Ducted 450mm Top Ducted 450mm Top Ducted 450mm

1530mm

1530mm

1530mm

YES

YES

YES

N/A

N/A

N/A

Round

Round

Round

Version: C 20/01/2015F

Page 1 of 1

Qasair Rangehoods Installation Instructions


Senator Technical Specification Sheet SEA

SENATOR - SEA

Wall Mounted

Power entry location is the same for all Senator models.

0 1 3

H 0 0 4

. t r o p p u s a r t x e r o f d e i l p p u s e r a s d o r d a e r h T l l A Model

600mm

900mm

900mm

N/A

N/A

N/A

1

1

2

LED Light

Cool

Cool

Cool

Nightlight

YES

YES

YES

Light Qty

1

2

2

Centre

510mm

510mm

Light Centres Filter Qty

2

3

3

Model Filter Size Conversion Top/Back Back/Top Electrical Connection Minimum Height (H =) Maximum Height (H =) PowderKote ď ˝ Available All-thread Fixing Centres Corner Type Condari Pty Ltd.

Qasair Rangehoods Installation Instructions

SEA 600L-1 272mm

SEA 900L-1 272mm

SEA 900L-2 272mm

m m 2 7 2 x

SEA 900L-2

m m 2 7 2 x

Motor Qty

SEA 900L-1

m m 2 7 2 x

Body Width Motor Box / Flue Width

SEA 600L-1

NO

NO

NO

Junction Box

Junction Box

Junction Box

400mm

400mm

400mm

1450mm

1450mm

1450mm

YES

YES

YES

400mm

700mm

700mm

Square

Square

Version: C 20/01/2015F

Square Page 1 of 2

41


Senator Technical Specification Sheet SEA

SENATOR - SEA

Wall Mounted

Power entry location is the same for all Senator models.

0 1 3

H 0 0 4

. t r o p p u s a r t x e r o f d e i l p p u s e r a s d o r d a e r h T l l A Model

1200mm

1500mm

1500mm

N/A

N/A

N/A

2

2

3 Cool

Nightlight

YES

YES

YES

Light Qty

2

2

2

648mm

816mm

816mm

4

5

5

Light Centres Filter Qty

Minimum Height (H =) Maximum Height (H =) PowderKote ď ˝ Available All-thread Fixing Centres Corner Type Condari Pty Ltd.

42

272mm

SEA 1500L-3 272mm

NO

NO

NO

Junction Box

Junction Box

Junction Box

400mm

400mm

400mm

1450mm

1450mm

1450mm

YES

YES

YES

1000

Square

1300

Square

Version: C 20/01/2015F

1300

m m

Cool

Electrical Connection

272mm

m m

Cool

Filter Size Conversion Top/Back Back/Top

SEA 1500L-2

SEA 1200L-2

m m

LED Light

Model

m m 2 7 2 x

Motor Qty

SEA 1500L-3

m m 2 7 2 x

Motor Box / Flue Width

SEA 1500L-2

m m 2 7 2 x

Body Width

SEA 1200L-2

Square Page 2 of 2

Qasair Rangehoods Installation Instructions


Maitland Technical Specification Sheet SMF

MAITLAND - SMF

Wall Mounted

Power entry location is the same for all SMF models. Ø15mm Radius

0 1 0 1 8 2

0 2 0 2 0 1 1

0 5 4

0 5 1

0 1 5 Ø15mm Radius

Model

600mm

900mm

900mm

Filter Size Conversion Top/Back Back/Top

450mm

750mm

750mm

1

1

2

Cool

Cool

Cool

Nightlight

YES

YES

YES

Light Qty

2

2

2

510mm

510mm

3

3

Light Centres Filter Qty

m m 0 1 3

LED Light

2

Model

Electrical Connection Minimum Height (H =) Maximum Height (H =) PowderKote  Available All-thread Fixing Centres Corner Type Condari Pty Ltd.

Qasair Rangehoods Installation Instructions

SMF 600L-1 272mm

SMF 900L-1 272mm

SMF 900L-2 272mm

m m 5 5 3 x

Motor Qty

SMF 900L-2

m m 5 5 3 x

Motor Box / Flue Width

SMF 900L-1

m m 5 5 3 x

Body Width

SMF 600L-1

YES

YES

YES

Junction Box

Junction Box

Junction Box

N/A

N/A

N/A

N/A

N/A

N/A

YES

YES

YES

N/A

N/A

N/A

Round

Round

Round

Version: C 20/01/2015F

Page 1 of 4

43


Maitland Technical Specification Sheet SMF

MAITLAND - SMF

Wall Mounted

Power entry location is the same for all SMF models.

Ø15mm Radius

0 1 0 1 8 2

0 2 0 2 0 1 1

0 5 4

0 5 1

0 1 5 Ø15mm Radius

Model

Motor Qty

SMF 1200L-2

1000mm

1200mm

Filter Size

850mm

1050mm

Conversion Top/Back Back/Top

2

2

LED Light

Cool

Cool

Nightlight

YES

YES

Light Qty

2

2

510mm

648mm

3

4

Light Centres Filter Qty

Electrical Connection Minimum Height (H =) Maximum Height (H =) PowderKote  Available All-thread Fixing Centres Corner Type Condari Pty Ltd.

44

SMF 1000L-2 290mm

SMF 1200L-2 272mm

m m 5 5 3 x

Motor Box / Flue Width

Model

SMF 1000L-2

m m 5 5 3 x

Body Width

YES

YES

Junction Box

Junction Box

N/A

N/A

N/A

N/A

YES

YES

N/A

N/A

Round

Round

Version: C 20/01/2015F Page 2 of 4

Qasair Rangehoods Installation Instructions


Maitland Technical Specification Sheet MAITLAND - SMF

SMF

Wall Mounted

Power entry location is the same for all SMF models.

Ø15mm Radius

0 1 0 1 8 2

0 2 0 2 0 1 1

0 5 4

0 5 1

0 1 5 Ø15mm Radius

Model

1500mm

1500mm

1800mm

Filter Size Conversion Top/Back Back/Top

1350mm

1350mm

1650mm

2

3

3

LED Light

Cool

Cool

Cool

Nightlight

YES

YES

YES

Light Qty

2

2

4

816mm

816mm

422mm

5

5

6

Light Centres Filter Qty

Model

Electrical Connection Minimum Height (H =) Maximum Height (H =) PowderKote  Available All-thread Fixing Centres Corner Type Condari Pty Ltd.

Qasair Rangehoods Installation Instructions

SMF 1500L-2 272mm

SMF 1800L-3

SMF 1500L-3 272mm

290mm

m m 5 5 3 x

Motor Qty

SMF 1800L-3

m m 5 5 3 x

Motor Box / Flue Width

SMF 1500L-3

m m 5 5 3 x

Body Width

SMF 1500L-2

YES

YES

YES

Junction Box

Junction Box

Junction Box

N/A

N/A

N/A

N/A

N/A

N/A

YES

YES

YES

N/A

N/A

N/A

Round

Round

Round

Version: C 20/01/2015F

Page 3 of 4

45


Maitland Technical Specification Sheet MAITLAND - SMF

SMF

Wall Mounted

D U O R H S 1 L 0 0 6 F M S D U O R H S 2 L 0 0 9 F M S

D U O R H S 2 L 0 0 0 1 F M S

D U O R H S 1 L 0 0 9 F M S D U O R H S 2 L 0 0 5 1 F M S D U O R H S 3 L 0 0 5 1 F M S

D U O R H S 3 L 0 0 8 1 F M S

D U O R H S 2 L 0 0 2 1 F M S SMF 900L-1 SHROUD

SMF 900L-2 SHROUD

SMF 1000L-2 SHROUD

SMF 1200L-2 SHROUD

SMF 1500L-2 SHROUD

300mm

300mm

3

1450mm

1450mm

YES

YES

300mm

300mm

300mm

3

1450mm

1450mm

1450mm

1450mm

1450mm

1450mm

YES

YES

YES

YES

YES

YES

Condari Pty Ltd.

46

SMF 1500L-3 SHROUD

m m 0 0

e l b a l i a v A

Minimum Height (H =) Maximum Height (H =) Powderkote ď ˝

SMF 600L-1 SHROUD

m m 0 0

Model

SMF 1800L-3 SHROUD

300mm

Version: C 20/01/2015F Page 4 of 4

Qasair Rangehoods Installation Instructions


Compact Technical Specification Sheet CM

COMPACT - CM

Wall Mounted

Power Entry

Ø15mm Radius

0 8 2

0 2

0 1 1 0 8

0 1 0 1 2 5 1 4 0 1 5 Power Entry

Ø15mm Radius

Model

Motor Qty

900mm

900mm

Filter Size

450mm

750mm

Conversion Top/Back Back/Top

1

2

LED Light

Cool

Cool

Nightlight

YES

YES

Light Qty

2

2

510mm

510mm

3

3

Light Centres Filter Qty

Model

Electrical Connection Minimum Height (H =) Maximum Height (H =) PowderKote  Available All-thread Fixing Centres Corner Type Condari Pty Ltd.

Qasair Rangehoods Installation Instructions

CM 900L-1 272mm

CM 900L-2 272mm

m m 5 5 3 x

Motor Box / Flue Width

CM 900L-2

m m 5 5 3 x

Body Width

CM 900L-1

YES

YES

Junction Box

Junction Box

N/A

N/A

N/A

N/A

YES

YES

N/A

N/A

Round

Round

Version: C 20/01/2015F Page 1 of 3

47


Compact Technical Specification Sheet CM

COMPACT - CM

Wall Mounted

Power Entry

Ø15mm Radius

0 8 2

0 2

0 1 1 0 8

0 1 0 1 2 5 1 4 0 1 5 Power Entry

Ø15mm Radius

Model

Motor Qty

1000mm

1200mm

Filter Size

850mm

1050mm

Conversion Top/Back Back/Top

2

2

LED Light

Cool

Cool

Nightlight

YES

YES

Light Qty

2

2

510mm

648mm

3

4

Light Centres Filter Qty

Model

Electrical Connection Minimum Height (H =) Maximum Height (H =) PowderKote  Available All-thread Fixing Centres Corner Type Condari Pty Ltd.

48

CM 1000L-2 290mm

CM 1200L-2 272mm

m m 5 5 3 x

Motor Box / Flue Width

CM 1200L-2

m m 5 5 3 x

Body Width

CM 1000L-2

YES

YES

Junction Box

Junction Box

N/A

N/A

N/A

N/A

YES

YES

N/A

N/A

Round

Round

Version: C 20/01/2015F Page 2 of 3

Qasair Rangehoods Installation Instructions


Compact Technical Specification Sheet CM

COMPACT - CM

Wall Mounted

D U O R H S 1 L 0 0 9 M C D U O R H S 2 L 0 0 9 M C

D U O R H S 2 L 0 0 0 1 M C D U O R H S 2 L 0 0 2 1 M C

CM 900L-2 SHROUD

CM 1200L-2 SHROUD

e l b a l i a v A

335mm

3

1450mm

1450mm

1450mm

YES

YES

YES

335mm

3

1450mm YES

Condari Pty Ltd.

Qasair Rangehoods Installation Instructions

CM 1000L-2 SHROUD

m m 5 3

CM 900L-1 SHROUD

m m 5 3

Model Minimum Height (H =) Maximum Height (H =) Powderkote ď ˝

Version: C 20/01/2015F Page 3 of 3

49


R A T S /

Statesman Technical Specification Sheet STA

0 8 3

STATESMAN - STA/STAR

Wall Mounted

0 5 2

0 2

0 2 0 5 2 H

Shroud

0 8

0 1 5

s mi u md 5a 1R

STA 900L-2 shown without shroud.

Power Entry Shroud

Shroud

Ø9mm S-S rail

s mi u md 5a 1R

STAR 900L-2 shown without shroud.

Rangehood is manufactured as top duct only. A conversion kit for back ducted is supplied.

Motor Qty

STAR 900L-2 900mm

Filter Size

403mm

403mm

Conversion Top/Back Back/Top

2

2

900mm

LED Light

Cool

Cool

Nightlight

YES

YES

Light Qty

2

2

510mm

510mm

3

3

Light Centres Filter Qty

Model

Electrical Connection Minimum Height (H =) Maximum Height (H =) PowderKote  Available All-thread Fixing Centres Corner Type Condari Pty Ltd.

50

STA 900L-2 272mm

STAR 900L-2 W/Rail 272mm

m m 5 5 3 x

Motor Box / Flue Width

STA 900L-2

m m 5 5 3 x

Body Width

l i a R / W

Model

YES

YES

Junction Box

Junction Box

740mm

740mm

1550mm

1550mm

YES

YES

N/A

N/A

Round

Round

Version: C 20/01/2015F Page 1 of 2

Qasair Rangehoods Installation Instructions


R A T S /

Statesman Technical Specification Sheet STA

0 8 3

STATESMAN - STA/STAR

Wall Mounted

0 5 2

0 2

0 2

STA 1200L-2 shown without shroud.

0 5 2 H

Shroud

0 8

0 1 5

s mi u md 5a 1R

Power Entry Shroud

Shroud

Ø9mm S-S rail

s mi u md 5a 1R

STAR 1200L-2 shown without shroud.

Rangehood is manufactured as top duct only. A conversion kit for back ducted is supplied. Model

Motor Qty

1200mm

1200mm

Filter Size

403mm

403mm

Conversion Top/Back Back/Top

2

2

LED Light

Cool

Cool

Nightlight

YES

YES

Light Qty

2

2

648mm

648mm

4

4

Light Centres Filter Qty

Model

Electrical Connection Minimum Height (H =) Maximum Height (H =) PowderKote  Available All-thread Fixing Centres Corner Type Condari Pty Ltd.

Qasair Rangehoods Installation Instructions

STA 1200L-2 272mm

STAR 1200L-2 W/Rail 272mm

m m 5 5 3 x

Motor Box / Flue Width

STAR 1200L-2 W/Rail

m m 5 5 3 x

Body Width

STA 1200L-2

YES

YES

Junction Box

Junction Box

740mm

740mm

1550mm

1550mm

YES

YES

N/A

N/A

Round

Round

Version: C 20/01/2015F Page 2 of 2

51


Integra Technical Specification Sheet IN

INTEGRA - IN

Wall Mounted

Power entry locations are the same for all Integra models.

0 0 0 6 1 1 0 7

0 2 0 1 1 0 2 0 0 3 0 0 1

Model

900mm

N/A

N/A

Motor Qty

1

2

LED Light

Cool

Cool

Nightlight

NO

NO

Light Qty

1

2

Centre

285mm

2

3

Light Centres Filter Qty

Filter Size Conversion Top/Back Back/Top Electrical Connection Minimum Height (H =) Maximum Height (H =) PowderKote ď ˝ Available All-thread Fixing Centres Corner Type Condari Pty Ltd.

52

IN 600L-1 272mm

YES

IN 900L-2 272mm

m m 5 5 3 x

600mm

Model

g n i h c t i w S e t o m e R

Motor Box / Flue Width

IN 900L-2

m m 5 5 3 x

Body Width

IN 600L-1

YES Remote Switching

N/A

N/A

N/A

N/A

N/A

N/A

N/A

N/A

Square

Square

Version: A 28/11/2014F Page 1 of 2

Qasair Rangehoods Installation Instructions


Integra Technical Specification Sheet IN

INTEGRA - IN

Wall Mounted

Power entry locations are the same for all Integra models.

0 0 6 0 1 1 0 7

0 2 0 1 1 0 2 0 0 3 0 0 1

Model

Motor Qty

1200mm

1200mm

N/A

N/A

2

3

LED Light

Cool

Cool

Nightlight

NO

NO

Light Qty

2

2

560mm

560mm

4

4

Light Centres Filter Qty

Model Filter Size Conversion Top/Back Back/Top Electrical Connection Minimum Height (H =) Maximum Height (H =) PowderKote ď ˝ Available All-thread Fixing Centres Corner Type Condari Pty Ltd.

Qasair Rangehoods Installation Instructions

IN 1200L-2 272mm

IN 1200L-3 272mm

m m 5 5 3 x

Motor Box / Flue Width

IN 1200L-3

m m 5 5 3 x

Body Width

IN 1200L-2

YES

YES

Remote Switching

Remote Switching

N/A

N/A

N/A

N/A

N/A

N/A

N/A

N/A

Square

Square

Version: A 28/11/2014F Page 2 of 2

53


INSTALLATION INSTRUCTIONS

• TR CT (REMOTE SWITCHED)

Installation must be carried out by the procedure outlined. Failure to do so may void the guarantee. Electrical: Wiring to the appliance must comply with State and local Regulations. Connection to be carried out by a registered electrician.

1. Remove hood from packaging being careful not to touch the stainless steel front. 2. Locate centre of stove and using level or plumb line, mark centre line up to the ceiling. 3. In a new house the hood can be fixed into the ceiling space by bolting or screwing into the ceiling joists or by building a frame to support the hood. 4. In an existing home, a hole must be cut into the ceiling and pushing the hood into the space. Ensure there are no obstructions to placing the hood in position. In these cases a ceiling flange in stainless can be supplied to finish the hood to the ceiling. It is not supplied in colours. 5. The outlets are either top or back ducted and can be changed on site and the hood can be reversed to suit the intended ducting direction. 6. Once secure in position standard ducting pieces can be used. 7. Switches are not provided and remote switching in a convenient position must be installed. The switching used must be an electrically approved switch and is not provided by Condari Pty Ltd. 8. The TR CT can be wired with either individual fan control or one pair of switches to control all fans together. Contact Condari for further information

54

Qasair Rangehoods Installation Instructions


Thermidor Technical Specification Sheet Ceiling Cavity Mounted

TR CT

THERMIDOR - TR CT

0 1 1

0 2 0 1 1 0 2

0 5 3

0 0 6

Power entry location is the same for all Thermidor models.

Optional Flange

This view is shown with grills removed to expose filters.

Model

1200mm

1500mm

N/A

N/A

Motor Qty

3

3

LED Light

NO

NO

Nightlight

NO

NO

Grill Qty

2

3

Grill Size

598mm x 596mm

498mm x 596mm

Filter Qty

4

5

Model Filter Size Conversion Top/Back Back/Top Electrical Connection Minimum Height (H =) Maximum Height (H =) PowderKote ď ˝ Available All-thread Fixing Centres Corner Type Condari Pty Ltd.

Qasair Rangehoods Installation Instructions

TR CT 1200-3 290mm

TR CT 1500-3 290mm

m m 0 8 4 x

Motor Box / Flue Width

TR CT 1500-3

m m 0 8 4 x

Body Width

TR CT 1200-3

YES

YES

Remote Switching

Remote Switching

N/A

N/A

N/A

N/A

N/A

N/A

N/A

N/A

Square

Square

Version: B 03/12/2014F Page 1 of 1

55


INSTALLATION INSTRUCTIONS • BRH / LAM • BAR • MAR • MAJ • FAS

Installation must be carried out by the procedure outlined. Failure to do so may void the guarantee. Electrical: Wiring to the appliance must comply with State and local Regulations. Connection to be carried out by a registered electrician.

1. 2. 3. 4. 5.

Remove hood from packaging being careful not to touch stainless steel front. Locate centre of stove and using level or plumb line, mark centre line up to ceiling. Measure height of hood and mark same distance down from ceiling with level line. Mark where ducting needs to be cut either on wall or ceiling, check for wires and timber, then cut hole for ducting. Locate solid fixing points on wall (This hood is very heavy and requires good solid fixing points). If necessary fit some solid fixing timber to wall behind hood now. 6. Mark fixing points on rear of hood and drill fixing holes to take solid screws. 7. Drill hole in rear or top of the hood to take electrical cable. 8. It may be easier to remove fans for easier fixing and weight when installing. 9. If you do not have adjustable stands you can cut some temporary timber props to sit canopy on when you lift into position, to hold it while you fit fixing screws. 10. You need two people to lift this canopy into position. * Do not attempt this on your own, as you could cause yourself injury and damage the hood or stove. CAUTION: Do not under any circumstances lift from the front of the hood or put any pressure on the front face as you will damage the hood permanently. 11. Carefully lift hood into position and sit on stands to level hood, then screw hood into position through fixing holes. Make sure you put fixing holes high up in the hood to stop it falling forward. 12. Fit ducting to hood to the outside atmosphere as required either through the roof with appropriate flashing by a plumber or through the rear wall vent, which needs to be siliconed to the rear of the hood. Always use approved ducting and seal all duct joins with duct tape or silicone. 13. An electrician should make the electrical connection to the hood by connecting to the 10 AMP junction box. Ensure power is turned off during this procedure. 14. Refit fans to hood, insert filters and test. Handy hints: Sometimes it is easier to lift the hood with a person in the roof space pulling up on a rope attached to a wooden block placed inside base of hood and a second person down the bottom guiding the hood into position.

56

Qasair Rangehoods Installation Instructions


Benton Technical Specification Sheet BENTON - BRH

BRH

Wall Mounted

Power entry location is the same for all Benton models.

H 0 1 5

. t r o p p u s a r t x e r o f d e i l p p u s e r a s d o r d a e r h T l l A Model

600mm

900mm

900mm

N/A

N/A

N/A

1

1

2

LED Light

Cool

Cool

Cool

Nightlight

YES

YES

YES

Light Qty

2

2

2

310mm

510mm

510mm

2

3

3

Light Centres Filter Qty

Model Filter Size Conversion Top/Back Back/Top Electrical Connection Minimum Height (H =) Maximum Height (H =) PowderKote ď ˝ Available All-thread Fixing Centres Corner Type Condari Pty Ltd.

Qasair Rangehoods Installation Instructions

BRH 600L-1 272mm

BRH 900L-1 272mm

BRH 900L-2 272mm

m m 5 5 3 x

BRH 900L-2

m m 5 5 3 x

Motor Qty

BRH 900L-1

m m 5 5 3 x

Body Width Motor Box / Flue Width

BRH 600L-1

NO

NO

NO

Junction Box

Junction Box

Junction Box

400mm

400mm

400mm

1450mm

1450mm

1450mm

YES

YES

YES

500mm

800mm

800mm

Square

Square

Square

Version: C 20/01/2015F

Page 1 of 2

57


Benton Technical Specification Sheet BRH

BENTON - BRH

Wall Mounted

Power entry location is the same for all Benton models.

0 5 0 2 2

5 7 0 5 2 H

0 1 5

. t r o p p u s a r t x e r o f d e i l p p u s e r a s d o r d a e r h T l l A Model

Motor Qty

1000mm

1200mm

N/A

N/A

2

2

LED Light

Cool

Cool

Nightlight

YES

YES

Light Qty

2

2

510mm

648mm

3

4

Light Centres Filter Qty

Model Filter Size Conversion Top/Back Back/Top Electrical Connection Minimum Height (H =) Maximum Height (H =) PowderKote ď ˝ Available All-thread Fixing Centres Corner Type Condari Pty Ltd.

58

BRH 1000L-2 290mm

BRH 1200L-2 272mm

m m 5 5 3 x

Motor Box / Flue Width

BRH 1200L-2

m m 5 5 3 x

Body Width

BRH 1000L-2

NO

NO

Junction Box

Junction Box

400mm

400mm

1450mm

1450mm

YES

YES

800mm

950mm

Square

Square

Version: C 20/01/2015F Page 2 of 2

Qasair Rangehoods Installation Instructions


Lamont Technical Specification Sheet LAM

LAMONT - LAM

Wall Mounted

Power entry location is the same for all Lamont models.

H 0 1 5

. t r o p p u s a r t x e r o f d e i l p p u s e r a s d o r d a e r h T l l A Model

Motor Qty

900mm

900mm

N/A

N/A

1

2

LED Light

Cool

Cool

Nightlight

YES

YES

Light Qty

2

2

510mm

510mm

3

3

Light Centres Filter Qty

Model Filter Size Conversion Top/Back Back/Top Electrical Connection Minimum Height (H =) Maximum Height (H =) PowderKote ď ˝ Available All-thread Fixing Centres Corner Type

Qasair Rangehoods Installation Instructions

272mm

LAM 900L-2 272mm

NO

NO

Junction Box

Junction Box

400mm

400mm

1100mm

1100mm

N/A

N/A

800mm

800mm

Square

Square

Version: B 20/01/2015

F

Condari Pty Ltd.

LAM 900L-1

m m 5 5 3 x

Motor Box / Flue Width

LAM 900L-2

m m 5 5 3 x

Body Width

LAM 900L-1

Page 1 of 2

59


Lamont Technical Specification Sheet LAM

LAMONT - LAM

Wall Mounted

Power entry location is the same for all Lamont models.

0 5 0 2 2

5 7 0 5 2 H

0 1 5

. t r o p p u s a r t x e r o f d e i l p p u s e r a s d o r d a e r h T l l A Model

Motor Qty

1000mm

1200mm

N/A

N/A

2

2

LED Light

Cool

Cool

Nightlight

YES

YES

Light Qty

2

2

510mm

648mm

3

4

Light Centres Filter Qty

Model Filter Size Conversion Top/Back Back/Top Electrical Connection Minimum Height (H =) Maximum Height (H =) PowderKote ď ˝ Available All-thread Fixing Centres Corner Type Condari Pty Ltd.

60

LAM 1000L-2 290mm

LAM 1200L-2 272mm

m m 5 5 3 x

Motor Box / Flue Width

LAM 1200L-2

m m 5 5 3 x

Body Width

LAM 1000L-2

NO

NO

Junction Box

Junction Box

400mm

400mm

1100mm

1100mm

N/A

N/A

800mm

950mm

Square

Square

Version: B 20/01/2015F Page 2 of 2

Qasair Rangehoods Installation Instructions


Barclay Technical Specification Sheet BAR

BARCLAY - BAR

Wall Mounted 0 2 0 5 2

5 7 0 5 2 H

0 0 1

0 1 5

n g i s e D l a n o i t p O

Power entry location is the same for all Barclay models.

Model Body Width Motor Box / Flue Width Motor Qty LED Light

Motor Box can be either L/H or R/H.

BAR 1800-2400L-2 1800mm-2400mm

BAR 2400-3000L-2 2400mm-3000mm

900mm,1000mm,1200mm 900mm,1000mm,1200mm

2 Cool

2 Cool

YES

YES

Light Qty

Varies depending on length of rangehood Varies depending on length of rangehood Varies depending on length of rangehood

Varies depending on length of rangehood Varies depending on length of rangehood Varies depending on length of rangehood

Light Centres Filter Qty

BAR 1800-2400L-2

BAR 2400-300L-2

Filter Size

Varies depending on length of rangehood

Varies depending on length of rangehood

NO

NO

Junction Box

Junction Box

550mm

550mm

Conversion Top/Back Back/Top Electrical Connection Minimum Height (H =) Maximum Height (H =) PowderKote ď ˝ Available All-thread Fixing Centres Corner Type Condari Pty Ltd.

Qasair Rangehoods Installation Instructions

1550

m m

Nightlight

Model

1550mm

N/A

N/A

N/A

N/A

Square

Square

Version: B 20/01/2015F Page 1 of 1

61


Martell Technical Specification Sheet MARTELL - MAR

MAR

Wall Mounted

Power entry location is the same for all Martell models.

0 1 0 1 0 3

0 2 0 1 10 2 0 0 5 0 0 7 8 4 1

0 1 5

Model

900mm

900mm

1200mm

N/A

N/A

N/A

1

2

2

Cool

Cool

Cool

Nightlight

YES

YES

YES

Light Qty

2

2

2

422mm

544mm

2

4

Light Centres Filter Qty

m m 2 2 4

LED Light

2

Model Filter Size Conversion Top/Back Back/Top Electrical Connection Minimum Height (H =) Maximum Height (H =) PowderKote ď ˝ Available All-thread Fixing Centres Corner Type Condari Pty Ltd.

62

MAR 900L-1 422mm

MAR 900L-2 422mm

MAR 1200L-2 272mm

m m 2 7 2 x

Motor Qty

MAR 1200L-2

m m 2 7 2 x

Motor Box / Flue Width

MAR 900L-2

m m 2 7 2 x

Body Width

MAR 900L-1

NO

NO

NO

Junction Box

Junction Box

Junction Box

N/A

N/A

N/A

N/A

N/A

N/A

N/A

N/A

N/A

N/A

N/A

N/A

Square

Square

Square

Version: A 01/07/2014F

Page 1 of 2

Qasair Rangehoods Installation Instructions


Martell Technical Specification Sheet MAR

MARTELL - MAR

Wall Mounted

Power entry location is the same for all Martell models.

0 0 3 0 1 1

0 2 0 1 10 2 0 0 5 0 0 7 8 4 1

0 1 5

Model

Motor Qty

MAR 1800L-3

1500mm

1800mm

N/A

N/A

3

3

LED Light

Cool

Cool

Nightlight

YES

YES

Light Qty

2

4

816mm

422mm

5

4

Light Centres Filter Qty

Model Filter Size Conversion Top/Back Back/Top Electrical Connection Minimum Height (H =) Maximum Height (H =) PowderKote ď ˝ Available All-thread Fixing Centres Corner Type Condari Pty Ltd.

Qasair Rangehoods Installation Instructions

MAR 1500L-3 272mm

MAR 1800L-3 422mm

m m 2 7 2 x

Motor Box / Flue Width

MAR 1500L-3

m m 2 7 2 x

Body Width

NO

NO

Junction Box

Junction Box

N/A

N/A

N/A

N/A

N/A

N/A

N/A

N/A

Square

Square

Version: A 01/07/2014F Page 2 of 2

63


Majestic Technical Specification Sheet MAJ

MAJESTIC - MAJ

Wall Mounted

Power entry location is the same for all Majestic models.

0 0 5

H 0 5 1

0 0 3

. t r o p p u s a r t x e r o f d e i l p p u s e r a s d o r d a e r h T l l A Model

MAJ 1000L-2

900mm

900mm

1000mm

N/A

N/A

N/A

1

2

2

LED Light

Cool

Cool

Cool

Nightlight

YES

YES

YES

Light Qty

2

2

2

350mm

350mm

350mm

3

3

2

Light Centres Filter Qty

Model Filter Size Conversion Top/Back Back/Top Electrical Connection Minimum Height (H =) Maximum Height (H =) PowderKote ď ˝ Available All-thread Fixing Centres Corner Type Condari Pty Ltd.

64

MAJ 900L-2

MAJ 900L-1 272mm

272mm

MAJ 1000L-2 422mm

m m 2 7 2 x

Motor Qty

MAJ 900L-2

m m 2 7 2 x

Motor Box / Flue Width

MAJ 900L-1

m m 2 7 2 x

Body Width

NO

NO

NO

Junction Box

Junction Box

Junction Box

600mm

600mm

600mm

1150mm

1150mm

1150mm

N/A

N/A

N/A

600mm

600mm

600mm

Square

Square

Square

Version: B 29/11/2014F

Page 1 of 2

Qasair Rangehoods Installation Instructions


Majestic Technical Specification Sheet MAJ

MAJESTIC - MAJ

Wall Mounted

Power entry location is the same for all Majestic models.

0 0 5

H 0 5 1

0 0 3

. t r o p p u s a r t x e r o f d e i l p p u s e r a s d o r d a e r h T l l A Model

Motor Qty

1200mm

1500mm

N/A

N/A

2

2

LED Light

Cool

Cool

Nightlight

YES

YES

Light Qty

2

2

500mm

600mm

4

5

Light Centres Filter Qty

Model Filter Size Conversion Top/Back Back/Top Electrical Connection Minimum Height (H =) Maximum Height (H =) PowderKote ď ˝ Available All-thread Fixing Centres Corner Type Condari Pty Ltd.

Qasair Rangehoods Installation Instructions

MAJ 1200L-2 272mm

MAJ 1500L-2 272mm

m m 2 7 2 x

Motor Box / Flue Width

MAJ 1500L-2

m m 2 7 2 x

Body Width

MAJ 1200L-2

NO

NO

Junction Box

Junction Box

600mm

600mm

1150mm

1150mm

N/A

N/A

800mm

1100mm

Square

Square

Version: B 29/11/2014F Page 2 of 2

65


Fasano Technical Specification Sheet FAS

FASANO - FAS

Wall Mounted

Power entry location is the same for all Fasano models.

0 0 0 6 5 5 3 2

5 7 0 5 2 H

0 1 5

Model

Motor Qty

FAS 1200L-2

900mm

1200mm

N/A

N/A

2

2

Nightlight

YES

YES

Light Qty

2

2

510mm

648mm

3

4

Light Centres Filter Qty

Electrical Connection Minimum Height (H =) Maximum Height (H =) PowderKote ď ˝ Available All-thread Fixing Centres Corner Type Condari Pty Ltd.

66

272mm

FAS 1200L-2 272mm

NO

NO

Junction Box

Junction Box

700mm

700mm

1400

YES 300mm

Square

1400mm YES 300mm

m m 0 0 8 x

Cool

Conversion Top/Back Back/Top

m m 0 0 5 x

Cool

Filter Size

FAS 900L-2

m m

LED Light

Model

m m 5 5 3 x

Motor Box / Flue Width

FAS 900L-2

m m 5 5 3 x

Body Width

.

All-Thread rods are supplied for extra support

Square

Version: C 20/01/2015F Page 1 of 1

Qasair Rangehoods Installation Instructions


INSTALLATION INSTRUCTIONS • 4F • PRE / FRA • SQ 420 / MOL • FPR • MA • HAM • BUR / LAM • D 400 / D 500 / SEN

Installation must be carried out by the procedure outlined. Failure to do so may void the guarantee. Electrical: Wiring to the appliance must comply with State and local Regulations. Connection to be carried out by a registered electrician.

It is recommended that the rangehood be mounted 100mm back from the edge of the benchtop. 1. The rangehood can be installed between 700mm and 800mm above the cooking surface. The installer should check for local requirements in case additional provisions apply. 2. It is advisable to remove fans for easier handling of unit by removing retaining bolts or clips and unplugging electrical connector. 3. Measure hole centres and duct size on top of the rangehood. This will vary with the hood size, model and number of fans fitted and will determine the ducting required. 4. Using a plumb line, mark the ceiling before making the cut out. Check for obstructions like electrical cables etc. 5. Cut two (2) supporting beams approximately 1.0m long and pre-drill hole centres so that the supporting beams are 90 degrees to the ceiling joists. 6. Fit 8mm all thread (threaded rod) through holes provided and secure with nuts and washers. 7. Level unit by tensioning the 8mm nuts. Do not over tighten. 8. Fit off ducting as required.

Installation Suggestions 1)

Qasair Rangehoods Installation Instructions

2)

67


4 Flare Technical Specification Sheet Ceiling Mounted

4F

4 FLARE - 4F

Power Entry

00 06 21

H

Ø15mm Radius

0 8

0 8 4 0 0 6

Power Entry

Model

4F 1200L-2

900mm

1200mm

Filter Size

350mm

400mm

Conversion Top/Back Back/Top

2

2 Cool

Nightlight

YES

YES

Light Qty

2

2

510mm

648mm

3

4

Light Centres Filter Qty

Corner Type Condari Pty Ltd.

68

272mm

4F 1200L-2 272mm

N/A

N/A

10 Amp Lead

10 Amp Lead

480mm

480mm

1660mm

1660mm

YES

YES

293mm

Round

343mm

° m m 0 4 1 x

Cool

Electrical Connection Minimum Height (H =) Maximum Height (H =) PowderKote  Available All-thread Fixing Centres

4F 900L-2

m m 0 4 1 x

LED Light

Model

m m 2 2 4 x

Motor Qty

4F 900L-2

m m 2 2 4 x

Body Width Motor Box / Flue Width

.

A Transition is supplied to suit standard DL2 ducting

Ø15mm Radius

Round

Version: C 20/01/2015F Page 1 of 1

Qasair Rangehoods Installation Instructions


President Technical Specification Sheet Ceiling Mounted

PRE

PRESIDENT - PRE

Power Entry

5 8

0 0 2 5 4 2

5 8

Ø15mm Radius

H 0 0 1

0 0 6

Power Entry

Ø15mm Radius Model

Motor Qty

900mm

1200mm

Filter Size

420mm

420mm

Conversion Top/Back Back/Top

2

2 Cool

Nightlight

YES

YES

Light Qty

2

2

510mm

648mm

3

4

Light Centres Filter Qty

Minimum Height (H =) Maximum Height (H =) PowderKote  Available All-thread Fixing Centres Corner Type Condari Pty Ltd.

Qasair Rangehoods Installation Instructions

272mm

PRE 1200L-2 272mm

NO

NO

10 Amp Lead

10 Amp Lead

550mm

550mm

1600mm

1600mm

YES

YES

360mm

Round

360mm

m m 0 5 2 x

Cool

Electrical Connection

PRE 900L-2

m m 0 5 2 x

LED Light

Model

m m 2 2 4 x

Motor Box / Flue Width

PRE 1200L-2

m m 2 2 4 x

Body Width

PRE 900L-2

Round

Version: C 20/01/2015F Page 1 of 2

69


President Technical Specification Sheet PRESIDENT - PRE

Ceiling Mounted

PRE

Power Entry

0 2 4 0 5 2 5 8

5 8

Ø15mm Radius

H 0 0 1

0 0 6 Power Entry

Ø15mm Radius Model

1500mm

1500mm

1800mm

Filter Size Conversion Top/Back Back/Top

420mm

900mm

900mm

2

3

3 Cool

Nightlight

YES

YES

YES

Light Qty

2

2

4

816mm

816mm

422mm

5

5

6

Light Centres Filter Qty

Corner Type Condari Pty Ltd.

70

272mm

290mm

NO

NO

NO

10 Amp Lead

10 Amp Lead

10 Amp Lead

550mm

550mm

550mm

1600mm

1600mm

1600mm

YES

YES

YES

360mm

Round

840mm

Round

Version: C 20/01/2015F

840mm

m m 0 7 2 x

Cool

Minimum Height (H =) Maximum Height (H =) PowderKote  Available All-thread Fixing Centres

272mm

PRE 1800L-3

m m 0 7 2 x

Cool

Electrical Connection

PRE 1500L-3

PRE 1500L-2

m m 0 5 2 x

LED Light

Model

m m 2 2 4 x

Motor Qty

PRE 1800L-3

m m 2 2 4 x

Motor Box / Flue Width

PRE 1500L-3

m m 2 2 4 x

Body Width

PRE 1500L-2

Round Page 2 of 2

Qasair Rangehoods Installation Instructions


Maddison Technical Specification Sheet Ceiling Mounted

MA

MADDISON - MA

Power Entry.

0 2 4

x oh Bt d ri o t W o M

0 5 2

0 5 2

0 2

0 2

0 5 x 2 o h Bt d ri o t W o M

Flues are equally spaced across the body width.

H 0 5 1

l a u q E

l a u q E

l a u q E

Motor Qty LED Light

Light Qty

420mm

4

4

Cool

Cool

YES

YES

Varies depending on length of rangehood Varies depending on length of rangehood Varies depending on length of rangehood

Varies depending on length of rangehood Varies depending on length of rangehood Varies depending on length of rangehood

Conversion Top/Back Back/Top Electrical Connection Minimum Height (H =) Maximum Height (H =) PowderKote ď ˝ Available All-thread Fixing Centres Corner Type Condari Pty Ltd.

Qasair Rangehoods Installation Instructions

MA 2500-3000L-4 Varies depending on length of rangehood

N/A

N/A

10 Amp Lead

10 Amp Lead

550mm

550mm

1600

N/A 360mm

Square

1600mm N/A 360mm

m m 0 5 2 x

Filter Qty

420mm

Filter Size

MA 2000-2500L-4 Varies depending on length of rangehood

m m 0 5 2 x

Light Centres

2500mm-3000mm

Model

m m

Nightlight

2000mm

MA 2500-3000L-4

0 0 6

h t d i W y d o B

Body Width Motor Box / Flue Width

MA 2000-2500L-4

m m 0 0 5 2 -

Model

Square

Version: B 26/11/2014F Page 1 of 1

71


Winton Technical Specification Sheet Ceiling Mounted

SQ 420

WINTON - SQ

5 8

0 5 2

5 8

5 8

0 5 2

5 8 H

0 2 4

0 2 4

Power Entry.

Front

Model

Motor Box / Flue Width Motor Qty

420mm N/A 2

LED Light

Cool

Nightlight

YES

Light Qty

1

Light Centres Filter Qty

Centre 1

Model Filter Size Conversion Top/Back Back/Top Electrical Connection Minimum Height (H =) Maximum Height (H =) PowderKote ď ˝ Available All-thread Fixing Centres Corner Type Condari Pty Ltd.

72

SQ 420L-2 355mm

m m 0 5 2 x

Body Width

SQ 420L-2

NO 10 Amp Lead 520mm 1450mm YES 250mm X 320mm

Square Version: B 27/11/2014F

Page 1 of 1

Qasair Rangehoods Installation Instructions


Molina Technical Specification Sheet Ceiling Mounted

MOL

MOLINA - MOL

5 8

0 5 2

5 8

5 8

0 5 2

5 8 H

0 2 4

0 2 4

Power Entry.

Front

Model

Motor Box / Flue Width

420mm N/A

Motor Qty

2

LED Light

Cool

Nightlight

YES

Light Qty

1

Light Centres

Centre

Filter Qty

1

Model Filter Size Conversion Top/Back Back/Top Electrical Connection Minimum Height (H =) Maximum Height (H =) PowderKote ď ˝ Available All-thread Fixing Centres Corner Type Condari Pty Ltd.

Qasair Rangehoods Installation Instructions

MOL 420L-2 355mm

m m 0 5 2 x

Body Width

MOL 420L-2

NO 10 Amp Lead 520mm 1100mm N/A 250mm X 320mm

Square Version: B 27/11/2014F

Page 1 of 1

73


Hamilton Technical Specification Sheet Ceiling Mounted

HAM

HAMILTON - HAM

Power entry location is the same for all Hamilton models.

5 2

0 0 0 5 3 2

5 2

Front

H 0 0 6 Front Model

Motor Qty

HAM 1200L-2

900mm

1200mm

N/A

N/A

2

2

Nightlight

YES

YES

Light Qty

2

2

510mm

648mm

3

4

Light Centres Filter Qty

Electrical Connection Minimum Height (H =) Maximum Height (H =) PowderKote ď ˝ Available All-thread Fixing Centres Corner Type Condari Pty Ltd.

74

HAM 1200L-2 272mm x 422

NO

NO

10 Amp Lead

10 Amp Lead

700mm

700mm

1400

YES 500mm

Square

1400mm YES 800mm

m m 0 3 2 x

Cool

Conversion Top/Back Back/Top

m m 0 3 2 x

Cool

Filter Size

HAM 900L-2

m m

LED Light

Model

m m

Motor Box / Flue Width

HAM 900L-2

m m 2 2 4 x m m 2 7 2

Body Width

Square

Version: C 20/01/2015F Page 1 of 1

Qasair Rangehoods Installation Instructions


Fremont Technical Specification Sheet FREMONT - FPR

Ceiling Mounted

FPR Power Entry.

es r g a n si nx i f ot i s r no ep p mu is d l ea l r t r n o ef cl a ec si ep hy Tt eH b/ nR ar co xH o/ BL r re o t h o t i Me 0 2

0 2 4 0 5 2 H

0 5 1

0 0 6

s e v i t a n r e t l A t r o p p u S 2600mm-3600mm

420mm

420mm

2

2

Motor Qty LED Light

Light Qty

YES

YES

Varies depending on length of rangehood Varies depending on length of rangehood Varies depending on length of rangehood

Varies depending on length of rangehood Varies depending on length of rangehood Varies depending on length of rangehood

Minimum Height (H =) Maximum Height (H =) PowderKote ď ˝ Available All-thread Fixing Centres Corner Type Condari Pty Ltd.

Qasair Rangehoods Installation Instructions

N/A

N/A

10 Amp Lead

10 Amp Lead

550mm

550mm

1600

N/A 360mm

Square

1600mm N/A 360mm

m m 0 5 2 x

Filter Qty

Cool

Electrical Connection

Varies depending on length of rangehood

m m 0 5 2 x

Light Centres

Cool

Conversion Top/Back Back/Top

Varies depending on length of rangehood

m m

Nightlight

Filter Size

FPR 2600-3600L

2 -

1600mm-2600mm

Motor Box / Flue Width

FPR 1600-2600L

2 -

Body Width

Model

e b u T S S Q S m m 5 2 x m m 5 2

2 -

2 -

FPR 2600-3600L

e b u T S S Q S m m 5 2 x m m 5 2

e b u T S S m m 6 1 Ă˜ FPR 1600-2600L

e c a r b s s o r c w e r a u q S

e r a u q S

d n u o R

g n i g g i R Model

Square

Version: A 20/01/2015F Page 1 of 1

75


Burdett Technical Specification Sheet Ceiling Mounted

BUR

BURDETT - BUR

Power entry location is the same for all Burdett models.

0 5 2 Front

H 0 0 6 Front

Model

Motor Qty

BUR 1000L-2

900mm

1000mm

N/A

N/A

2

2 Cool

Nightlight

YES

YES

Light Qty

2

2

510mm

510mm

3

3

Light Centres Filter Qty

Electrical Connection Minimum Height (H =) Maximum Height (H =) PowderKote ď ˝ Available All-thread Fixing Centres Corner Type Condari Pty Ltd.

76

272mm

BUR 1000L-2 290mm

NO

NO

10 Amp Lead

10 Amp Lead

400mm

400mm

1450mm

1450mm

YES

YES

500mm

Square

500mm

m m 0 0 9 x

Cool

Filter Size Conversion Top/Back Back/Top

BUR 900L-2

m m 0 0 8 x

LED Light

Model

m m 2 2 4 x

Motor Box / Flue Width

BUR 900L-2

m m 2 2 4 x

Body Width

Square

Version: C 20/01/2015F Page 1 of 3

Qasair Rangehoods Installation Instructions


Burdett Technical Specification Sheet Ceiling Mounted

BUR

BURDETT - BUR

Power entry location is the same for all Burdett models.

Front

H 0 0 6 Front

Model

Motor Qty

BUR 1200L-3

1200mm

1200mm

N/A

N/A

2

3 Cool

Nightlight

YES

YES

Light Qty

2

2

648mm

648mm

4

4

Light Centres Filter Qty

Electrical Connection Minimum Height (H =) Maximum Height (H =) PowderKote ď ˝ Available All-thread Fixing Centres Corner Type Condari Pty Ltd.

Qasair Rangehoods Installation Instructions

272mm

Conversion Top/Back Back/Top

BUR 1200L-3 272mm

NO

NO

10 Amp Lead

10 Amp Lead

400mm

400mm

1450mm

1450mm

YES

YES

500mm

Square

500mm

m m 0 0 1 1 x

Cool

Filter Size

BUR 1200L-2

m m 0 0 1 1 x

LED Light

Model

m m 2 2 4 x

Motor Box / Flue Width

BUR 1200L-2

m m 2 2 4 x

Body Width

Square

Version: C 20/01/2015F Page 2 of 3

77


Burdett Technical Specification Sheet Ceiling Mounted

BUR

BURDETT - BUR

Power entry location is the same for all Burdett models.

Front

H 0 0 6 Front

Model

Motor Qty

1500mm

1500mm

N/A

N/A

2

3 Cool

Nightlight

YES

YES

Light Qty

2

2

816mm

816mm

5

5

Light Centres Filter Qty

Electrical Connection Minimum Height (H =) Maximum Height (H =) PowderKote ď ˝ Available All-thread Fixing Centres Corner Type Condari Pty Ltd.

78

272mm

Conversion Top/Back Back/Top

BUR 1500L-3 272mm

NO

NO

10 Amp Lead

10 Amp Lead

400mm

400mm

1450mm

1450mm

YES

YES

500mm

Square

500mm

m m 0 0 4 1 x

Cool

Filter Size

BUR 1500L-2

m m 0 0 4 1 x

LED Light

Model

m m 2 2 4 x

Motor Box / Flue Width

BUR 1500L-3

m m 2 2 4 x

Body Width

BUR 1500L-2

Square

Version: C 20/01/2015F Page 3 of 3

Qasair Rangehoods Installation Instructions


Belgrad Technical Specification Sheet Ceiling Mounted

BEL

BELGRAD - BEL

Power entry location is the same for all Belgrad models.

0 5 2 Front

H 0 0 6 Front

Model

Motor Qty

BEL 1000L-2

900mm

1000mm

N/A

N/A

2

2 Cool

Nightlight

YES

YES

Light Qty

2

2

510mm

510mm

3

3

Light Centres Filter Qty

Electrical Connection Minimum Height (H =) Maximum Height (H =) PowderKote ď ˝ Available All-thread Fixing Centres Corner Type Condari Pty Ltd.

Qasair Rangehoods Installation Instructions

272mm

BEL 1000L-2 290mm

NO

NO

10 Amp Lead

10 Amp Lead

400mm

400mm

1100mm

1100mm

N/A

N/A

500mm

Square

500mm

m m 0 0 9 x

Cool

Filter Size Conversion Top/Back Back/Top

BEL 900L-2

m m 0 0 8 x

LED Light

Model

m m 2 2 4 x

Motor Box / Flue Width

BEL 900L-2

m m 2 2 4 x

Body Width

Square

Version: B 20/01/2015F Page 1 of 2

79


Belgrad Technical Specification Sheet Ceiling Mounted

BEL

BELGRAD - BEL

Power entry location is the same for all Belgrad models.

Front

H 0 0 6 Front Model

Motor Qty

1200mm

1200mm

N/A

N/A

2

3 Cool

YES

YES

Light Qty

2

2

648mm

648mm

4

4

Light Centres Filter Qty

Electrical Connection Minimum Height (H =) Maximum Height (H =) PowderKote ď ˝ Available All-thread Fixing Centres Corner Type Condari Pty Ltd.

80

272mm

Conversion Top/Back Back/Top

BEL 1200L-3 272mm

NO

NO

10 Amp Lead

10 Amp Lead

400mm

400mm

1100mm

1100mm

N/A

N/A

500mm

Square

500mm

m m 0 0 1 1 x

Cool

Nightlight

Filter Size

BEL 1200L-2

m m 0 0 1 1 x

LED Light

Model

m m 2 2 4 x

Motor Box / Flue Width

BEL 1200L-3

m m 2 2 4 x

Body Width

BEL 1200L-2

Square

Version: B 20/01/2015F Page 2 of 2

Qasair Rangehoods Installation Instructions


D400 & D500 Instructions

D 400L-1 / SEN 400L-1 D 500L-2 / SEN 500L-2

1. Remove Rangehood from packaging and place on a flat clean surface. 2. Remove the filter. 3. Remove the four screws in the corners of the filter apperture.

1. Remove Rangehood from packaging and place on a flat clean surface. 4. Gently pull the base from the tube. 2. Remove the filter. 3. Remove the four screws in the corners of the filter apperture. 5.  Once removed, the power supply plug  4. Gently pull the base from the tube.      becomes visible. Disconnect and place  5. Once removed, the power supply and fan plug     the base assembly to one side. becomes visible. Disconnect and   place the base assembly to one side. 6.  Place the four lengths of All'thread Rod  6. Place the four lengths of All-thread Rod through the holes in the hood and (make      through the holes in the hood and (make  sure the seam is facing the right direction) secure through a brace in the ceiling.      sure the seam is facing the right direction) Feed the plug and cord into the ceiling space.      secure through a brace in the ceiling.  Feed  7. Fit nuts to top and bottom of All-thread Rods and tighten.      the plug and cord into the ceiling space. 8. Reconnect the power plug andAlbany reinstall base assembly.   Technical Specification Sheet 7.  Fit nuts to top and bottom of All'thread  9. Connect power supply in ceiling and test Rangehood. 10. Fit off ducting as required D      Rods and tighten. Ceiling Mounted  

8.  Reconnect the power plug and reinstall       base assembly.  

9.  Connect power supply in ceiling and test       Rangehood. 10. Fit off ducting as required.

Do not use flexible ducting. Do not reduce duct size. All duct pieces are available from  'Condari' or through your dealer.

d a e r h T

d a e r h T l l A

l l A 0 9 0 1 1

d a e r h T l l A

Power Entry.

d a e r h T l l A

0 5 2

5 3 2

Power Entry.

0 5 2

D 400L-1

N/A

N/A

Model Filter Size Conversion Top/Back Back/Top

D 400L-1 272mm

N/A

D 500L-2 379mm

m m 0 9 2 x

Motor Box / Flue Width

D 500L-2 500mm Instructions

m m 2 7 2 x

Body Diameter Qasair Rangehoods 400mm Installation

r e t e m a i D y d o B

r e t e m a i D y d o B

Model

N/A

81


Albany Technical Specification Sheet Ceiling Mounted

D

ALBANY - D

d a e r h T

d a e r h T l l A

l l A 0 9 0 1 1

d a e r h T l l A

Power Entry.

d a e r h T l l A

0 5 2

5 3 2

Power Entry.

0 5 2

D 500L-2

400mm

500mm

N/A

N/A

1

2

Nightlight

NO

YES

Light Qty

1

1

Centre

Centre

1

1

Light Centres Filter Qty

Electrical Connection Minimum Height (H =) Maximum Height (H =) PowderKote ď ˝ Available All-thread Fixing Centres Corner Type Condari Pty Ltd.

82

272mm

D 500L-2 379mm

N/A

N/A

10 Amp Lead

10 Amp Lead

550mm

650mm

1500

N/A 300mm

N/A

1500mm N/A 410mm

m m 0 6 1 x

Cool

Conversion Top/Back Back/Top

m m 0 6 1 x

Cool

Filter Size

D 400L-1

m m

LED Light

Model

m m 0 9 2 x

Motor Qty

D 400L-1

m m 2 7 2 x

Body Diameter Motor Box / Flue Width

r e t e m a i D y d o B

r e t e m a i D y d o B

Model

N/A

Version: A 01/07/2014F Page 1 of 1

Qasair Rangehoods Installation Instructions


Seneca Technical Specification Sheet Ceiling Mounted

SEN

SENECA - SEN

d a e r h T

d a e r h T l l A

l l A 0 9 0 1 1

d a e r h T l l A

Power Entry.

d a e r h T l l A

0 5 2

5 3 2

Power Entry.

0 5 2

Motor Qty

SEN 500L-2

400mm

500mm

N/A

N/A

1

2

Nightlight

NO

YES

Light Qty

1

1

Centre

Centre

1

1

Light Centres Filter Qty

Electrical Connection Minimum Height (H =) Maximum Height (H =) PowderKote ď ˝ Available All-thread Fixing Centres Corner Type Condari Pty Ltd.

Qasair Rangehoods Installation Instructions

272mm

SEN 500L-2 379mm

N/A

N/A

10 Amp Lead

10 Amp Lead

550mm

650mm

1100

N/A 300mm

N/A

1100mm N/A 410mm

m m 0 6 1 x

Cool

Conversion Top/Back Back/Top

m m 0 6 1 x

Cool

Filter Size

SEN 400L-1

m m

LED Light

Model

m m 0 9 2 x

Motor Box / Flue Width

SEN 400L-1

m m 2 7 2 x

Body Diameter

r e t e m a i D y d o B

r e t e m a i D y d o B

Model

N/A

Version: A 01/07/2014F Page 1 of 1

83


SINGLE MOTOR DUCTING NOTE: This Zinc Alume Strip is provided to join some duct pieces together. It will be clearly shown on the drawing of the piece it is supplied with.

I/D Internal Diameter

101. DL-1 Duct Length 1200mm DL-1C Duct Length (coloured)

101. DL-1A Duct Length 300mm

101. DL-1E Duct Length Extendable 1200mm

102. HB-1 Horizontal Bend 90ยบ

103. HB-1/45 Horizontal Bend 45ยบ

104. BD/WV-H-1 Back Draft Wall Vent Horizontal

105. BD/WV-H-1 MGS Back Draft Wall Vent Horizontal Marine Grade Stainless Steel

106. VB-1 Vertical Bend 90ยบ

107. VB-1/45 Vertical Bend 45ยบ

108. BD/WV-V-1 Back Draft Wall Vent Vertical

109. BD/WV-V-1 MGS Back Draft Wall Vent Vertical Marine Grade Staineless Steel

110. DD-1-L Duct Director Left

84

Qasair Rangehoods Installation Instructions


SINGLE MOTOR DUCTING

111. DD-1-R Duct Director Right

112. TT-1 Twisted Transition

113. DLE-DLE Flue Joiner

114. CD-920 Cavity Duct Extendable

115. CD-920 to DL-1 Cavity Duct to Duct Length

116. TR-1 Rectangular to Round Transition

117. DR-200 Duct Length 200ø 1200mm

118. DR-200 CB Duct Length 200ø 1200mm Colourbond

119. DR-200/45 Round Bend 45º

120. DR-200/90 Round Bend 90º

121. BD-6/7/9 WV-R/R Rear Register Kit

122. AS-20 Back Draft Shutter

123. CH-200 Chairman’s Hat 200ø

124. CH-200 CB Chairman’s Hat 200ø Colourbond

125. BD/RC-1 Back Draft Roof Cowl

Qasair Rangehoods Installation Instructions

85


SINGLE MOTOR DUCTING

126. BD/RC-1 CB Back Draft Roof Cowl Colourbond

127. BD/SQ-RC 200 Back Draft Roof Cowl 200ø

128. DLE-S/S CAP Stainless Steel Cap

129. BD/M-1 Back Draft Damper

130. CF-6/7/900H Ceiling Flange 6/7/900H

131. WVC-H-1 Wall Vent Cover Horizontal

132. WVC-H-1 MGS Wall Vent Cover Horizontal Marine Grade Stainless Steel

133. WVC-V-1 Wall Vent Cover Vertical

134. WVC-V-1 MGS Wall Vent Cover Vertical Marine Grade Stainless Steel

135. 6/7/900H-SC Spiggot Cap

136. EV/DL-1 Eave Vent Suit DL-1

137. WVC-6/7/9H-R/R Wall Vent Cover

138. RCP-200 S/S Roof Cap 200ø Stainless Steel

139. RC-200 S/S Roof Cowl 200ø Stainless Steel

140. RC-200 Roof Cowl 200ø Zinc Alumne

86

Qasair Rangehoods Installation Instructions


WALL VENT

141. RC-1 S/S Roof Cowl Single Motor Stainless Steel

142. FRC-200 Fire Rated Roof Cowl 200ø Grade 445 Stainless Steel.

143. FRWV-H-1 Fire Rated Wall Vent Horizontal

FIRE RATED WALL VENT SPECIFICATIONS

The wall vent and wall vent cover are made from 445M2 grade stainless steel which has a higher content of the corrosion element, chromium. The wall vent covers have stainless steel screening type 316 grade and meets the requirements for stainless steel screening under the Australian Standard AS 3959-2009 Construction of Buildings in Bushfire-prone areas, and are BAL 29 and BAL 40 compliant.

WALL VENT

144. FRWV-V-1 Fire Rated Wall Vent Vertical

Qasair Rangehoods Installation Instructions

87


TWIN MOTOR DUCTING NOTE: This Zinc Alume Strip is provided to join some duct pieces together. It will be clearly shown on the drawing of the piece it is supplied with.

I/D Internal Diameter

201. TMT Twin Motor Transition to DL-2

202. DL-2 Duct Length 1200mm

203. HB-2 Horizontal Bend 90ยบ

204. HB-2/45 Horizontal Bend 45ยบ

205. BD/WV-H-2 Back Draft Wall Vent

206. BD/WV-H-2 MGS Back Draft Wall Vent Marine Grade Stainless Steel

207. VB-2 Vertical Bend 90ยบ

208. VB-2/45 Vertical Bend 45ยบ

209. BD/WV-V-2 Back Draft Wall Vent

210. BD/WV-V-2 MGS Back Draft Wall Vent Marine Grade Stainlerss Steel

211. TT-2 Twisted Transition

212. DLE-2 to DLE-2 Flue Joiner

88

Qasair Rangehoods Installation Instructions


TWIN MOTOR DUCTING

213. BD-10/12/15-WV-R/R Rear Register Kit

214. TMT-300 Transition to 300ø

215. TR-2 Transition from DL-2 to 300ø

216. DR-300 Duct Length 300ø 1200mm

217. DR-300 CB Duct Length 300ø 1200mm Colourbond

218. DR-300/45 Round Bend 45º

219. DR-300/90 Round Bend 90º

220. DL-2 to 250SQ Rectangular to Square Transition

221. TMT-250/300 Transition from 250sq to 300º

222. TMT-250 Twin Motor to 250sq

223. DL-250 Duct Length 250sq 1200mm with Strap

224. HB-250 Horizontal Bend 250sq 90º

225. HB-250/45 Horizontal Bend 250sq 45º

226. TMT-250/90-L Duct Director 250sq Left

227. TMT-250/90-R Duct Director 250sq Right

Qasair Rangehoods Installation Instructions

89


TWIN MOTOR DUCTING

228. BD/WV-250SQ Back Draft Wall 250sq

229. BD/WV-250SQ MGS Back Draft Wall 250sq Marine Grade Stainless Steel

230 BD/RC-2 Back Draft Roof Cowl

231. BD/RC-2 CB Back Draft Roof Cowl Colourbond

232. CH-300 Chairman’s Hat 300ø

233. CH-300 CB Chairman’s Hat 300ø Colourbond

234. BD/SQ-RC-300 Back Draft Roof Cowl 300ø

235. BD/RC-250SQ Back Draft Roof Cowl 250sq

236. DLE-2-SS CAP Flue Cap

237. CF-10/12/1500H Ceiling Flange10/12/1500H

238. CF-3F900-2 Ceiling Flange 3F900-2

239. CF-3F1200-2 Ceiling Flange 3F1200-2

240. CF-4F900-2 Ceiling Flange 4F900-2

241. CF-4F1200-2 Ceiling Flange 4F1200-2

242. WVC-H-2 Wall Vent Cover Horizontal

90

Qasair Rangehoods Installation Instructions


TWIN MOTOR DUCTING

243.WVC-H-2 MGS Wall Vent Cover Horizontal Marine Grade Stainless Steel

244. WVC-V-2 Wall Vent Cover Vertical

245. WVC-V-2 MGS Wall Vent Cover Vertical Marine Grade Stainless Steel

246. WVC-250SQ Wall Vent Cover 250sq

247. WVC-250SQ MGS Wall Vent Cover 250sq Marine Grade Stainless Steel

248. WVC-10/12/1500H Wall Vent Cover 10/12/1500H

249. 10/12/1500H-SC Spiggot Cap 10/12/1500H

250. DD-2H-L Duct Director Horizontal Left

251. DD-2H-R Duct Director Horizontal Right

252. DD-2V-L Duct Director Vertical Left

253. DD-2V-R Duct Director Vertical Right

254. EV/DL-2 Eave Vent to Suit DL-2

255. BD/M-250SQ Back Draft Damper 250sq

256. AS-25 Back Draft Shutter

257. BD/WVC-SBS Back Draft Wall Vent Cover

Qasair Rangehoods Installation Instructions

91


TWIN MOTOR DUCTING

258. CF 3F-1500-2 Ceiling Flange 3F-1500-2

259. RCP-300 S/S Roof Cap 300ø Stainless Steel

260. RV-300 S/S Roof Ventilation Cowl 300ø Stainless Steel

261. RC-300 S/S Roof Cowl Twin Motor Stainless Steel

262. RC-2 S/S Roof Cowl Twin Motor Stainless Steel

263. FRC-300 S/SS Fire Rated Roof Cowl Grade 445 Stainless Steel

WALL VENT

264. FRWV-H-2 Fire Rated Wall Vent Horizontal

WALL VENT

265. FRWV-V-2 Fire Rated Wall Vent Vertical

WALL VENT

266. FRWV-250sq Fire Rated Wall Vent 250sq

FIRE RATED WALL VENT SPECIFICATIONS

The wall vent and wall vent cover are made from 445M2 grade stainless steel which has a higher content of the corrosion element, chromium. The wall vent covers have stainless steel screening type 316 grade and meets the requirements for stainless steel screening under the Australian Standard AS 3959-2009 Construction of Buildings in Bushfire-prone areas, and are BAL 29 and BAL 40 compliant.

92

Qasair Rangehoods Installation Instructions


TRIPLE MOTOR DUCTING NOTE: This Zinc Alume Strip is provided to join some duct pieces together. It will be clearly shown on the drawing of the piece it is supplied with.

I/D Internal Diameter

301. 3MT-DL-3 Three Motor Transition

302. DL-3 Duct Length 1200mm

303. HB-3 Horizontal Bend 90º

304. HB-3/45 Horizontal Bend 45º

305. VB-3 Vertical Bend 90º

306. VB-3/45 Vertical Bend 45º

307. TT-3 Twisted Transition

308. TMT-400x200/350 Transition from DL-3 to 350ø

309. TR-3 Transition to 350ø

310. DR-350 Duct Length 350ø

311. DR-350 CB Duct Length 350ø Colourbond

312. DR-350/45 Bend 45º 350ø

Qasair Rangehoods Installation Instructions

93


TRIPLE MOTOR DUCTING

313. DR-350/90 Bend 90º 350ø

314. BD/RC-3 Back Draft Roof Cowl

315. BD/RC-3 MGS Back Draft Roof Cowl Marine Grade Stainless Steel

316. BD/SQ-RC350 Back Draft Roof Cowl 350ø

317. BD/SQ-RC350 MGS Back Draft Roof Cowl 350ø Marine Grade Stainless Steel

318. CH-350 Chairmans Hat 350ø

319. CH-350 CB Chairmans Hat 350ø Colourbond

320. BD/WV-H-3 Back Draft Wall Vent Horizontal

321. BD/WV-H-3 MGS Back Draft Wall Vent Horizontal Marine Grade Stainless Steel

322. BD/WV-V-3 Back Draft Wall Vent Vertical

323. BD/WV-V-3 MGS Back Draft Wall Vent Vertical Marine Grade Stainless Steel

324. WVC-H-3 Wall Vent Cover Horizontal

325.WVC-H-3 MGS Wall Vent Cover Horizontal Marine Grade Stainless Steel

326. WVC-V-3 Wall Vent Cover Vertical

327. WVC-V-3 MGS Wall Vent Cover Vertical Marine Grade Stainless Steel

94

Qasair Rangehoods Installation Instructions


TRIPLE MOTOR DUCTING

328. DD-3V-L Duct Director Vertical Left

WALL VENT

331. FRWV-H-3 Fire Rated Wall Vent Horizontal

FIRE RATED WALL VENT SPECIFICATIONS

329. DD-3V-R Duct Director Vertical Right

WALL VENT

332. FRWV-V-3 Fire Rated Wall Vent Vertical

330. AS-35 Back Draft Shutter

333. FRC-350 Fire Rated Roof Cowl

The wall vent and wall vent cover are made from 445M2 grade stainless steel which has a higher content of the corrosion element, chromium. The wall vent covers have stainless steel screening type 316 grade and meets the requirements for stainless steel screening under the Australian Standard AS 3959-2009 Construction of Buildings in Bushfire-prone areas, and are BAL 29 and BAL 40 compliant.

Qasair Rangehoods Installation Instructions

95


INSTALLATION IDEAS Condari recommends Qasair and Condor Rangehoods be installed using ducting that is: • rigid • non-flammable • correctly sized to ensure maximum air movement and minimum noise levels. Ducting incorrectly with flexible or smaller diameter ducting will dramatically reduce the air movement and increase the noise level of the rangehood and will void the manufacturer’s warranty. The Installation Ideas below will give you some guidelines on how to correctly duct your Qasair and Condor Rangehood using Qasair and Condor ducting pieces.

FA 60L-1 T Rangehood

FA 60L-1 T Rangehood

3. FA 60L-1 T

4. FA 60L-1 T

FA 60L-1 T FA 60L-1 B Rangehood FA 60L-1 T Rangehood

5. FA 60L-1 T

96

6. FA 60L-1 T / FA 60L-1 B Qasair Rangehoods Installation Instructions


FA 90L-2 T Rangehood

FA 90L-2 T Rangehood

7. FA 90L-2 T

8. FA 90L-2 T

FA 90L-2 B Rangehood

FA 90L-2 T Rangehood

9. FA 90L-2 T

10. FA 90L-2 B

FA 90L-2 T Rangehood

FA 90L-2 T Rangehood

11. FA 90L-2 T Qasair Rangehoods Installation Instructions

12. FA 90L-2 T

97


600HL-1 T / 700HL-1 T / 900HL-1 T Rangehood

13. 600HL-1 T / 700HL-1 T / 900HL-1 T

CON 60L-1 T Rangehood

14. 600HL-1 T

CON 80L-1 T Rangehood

15. CON 60L-1 T

CON 60L-1 T Rangehood

17. CON 60L-1 T

98

600HL-1 T Rangehood

16. CON 80L-1 T

CON 80L-2 T Rangehood

18. CON 80L-2 T Qasair Rangehoods Installation Instructions


1200HL-2 T Rangehood

LIS 800L-2 T Rangehood

19. 1200HL-2 T

20. LIS 800L-2 T

LIS 1000L-2 T Rangehood

3F 900L-2 T / 1200L-2 T Rangehood

21. LIS 1000L-2 T

22. 3F 900L-2 T / 1200L-2 T

LIS 800L-1 T Rangehood

LIS 500L-1 T Rangehood

23. LIS 500L-1 T Qasair Rangehoods Installation Instructions

24. LIS 800L-1 T

99


LIS 1200L-2 B Rangehood

LIS 1000L-2 T Rangehood

CON 80L-1 T Rangehood

25. CON 80L-1 T / LIS 1000-2 T

26. LIS 1200L-2 B

FA-60L-1 B Rangehood

FA-90L-1 T Rangehood

2. FA 90L-1 T

100

1. FA 60L-1 B

Qasair Rangehoods Installation Instructions


FILTER CLEANING For the best results, please clean filters regularly. Condari recommends cleaning filters once per month, or immediately after heavy use. You can do this by hand washing in warm soapy water, or by placing filters in the top rack of the dishwasher using a detergent of pH 8 or less. Note: Washing the filters in the dishwasher may cause discolouration of the filters. Ensure the filters are completely dry before placing them back. Do not operate the rangehood without the filters installed. Condari does not recommend the use of any citrus or industrial products, particularly corrosive, caustic or acid.

RANGEHOOD CLEANING QASAIR rangehoods are made from stainless steel, either type 304 or type 316. • Type 304 is classified as 18/8 stainless steel • Type 316 is classified as 18/10 stainless steel. This means that the stainless is made of 18% nickel and either 8% or 10% of chromium respectively. Stainless steel gets its protective coating from the chromium oxidising in the air to form a protective surface of chromium oxide. Please use non-corrosive or non-abrasive cleaners (warm soapy water recommended). Stainless Steel cleaner may be used.

Qasair Rangehoods Installation Instructions

101


CONDARI PTY LTD APPLIANCE GUARANTEE The benefits conferred by this warranty are in addition to all other rights and remedies in respect of the product which the consumer has under the Competition and Consumer Act 2010 and similar state and territory laws. Condari P/L in Melbourne (and by their agency in Country Areas and other States) warrants that the appliance will be free from defects in materials and workmanship for a period of 36 months from the date of purchase of the appliance to the consumer. If there is a breach of this warranty, Condari will rectify, free of charge, at it’s nearest service centre or authorised service agency any fault caused by faulty workmanship or material at the time of manufacture occurring in the appliance within 36 months from the date of delivery of the appliance to the customer. This warranty is conditional upon the appliance being used only for personal, domestic and household purposes and installed and operated in accordance with QASAIR Instructions and does not apply to articles which by their nature are consumable. If a defect is caused by neglect, misuse, or failure to follow operating instructions where special precautions are detailed for user attention then a charge shall be made for the service call. For example: With the filters the user is specifically requested: • To clean filter regularly by handwashing or placing in a dishwasher at least once a month. • To turn rangehood off after each use. Where a claim is made under warranty, CONDARI reserves the right to determine whether or not the fault is caused by faulty workmanship or material or that the part is defective. The consumer shall be fully responsible for all expenses whatsoever incidental to the removal of parts from the unit or to their replacement. Amongst other things, such responsibility shall extend to damaged walls, tiles, fixtures and fittings whether or not the unit has been built into a cupboard and irrespective of the stage either of its installation or the fitting of any other item whatsoever in its vicinity. No other person, or firm or corporation is authorised by Condari to offer or give on its behalf any other greater warranty that given by Condari under this warranty.

102

Qasair Rangehoods Installation Instructions


EXCLUSIONS There are some exclusions from the Condari Pty Ltd Guarantee. (on previous page) CONDOR Rangehoods are designed to be used over all domestic barbecues available in AUSTRALIA. QASAIR Rangehoods are not to be used over barbecues approved for outdoor use only. Outdoor barbecues will have a rating plate on them specifying that they are approved for outdoor use only and also a mega joule rating per burner or a total mega joule rating. In practice any barbecue or outdoor cooking appliance over 50 mega joule will need a specially made rangehood with an air movement exceeding 2000 cubic meters per hour. QASAIR have hoods to go over domestic cookers such as VIKING, WOLF and CAPITAL cooking appliances. These brands have a mega joule rating of up to 95 mj and therefore special hoods are required for the appliances. CONDARI will manufacture special rangehoods to go over commercial cooking appliances situated in domestic kitchens. Once the heat output is over 50 mega joule a special rangehood is required.

Qasair Rangehoods Installation Instructions

103


STANDARD WARRANTY Date purchased Purchased from Model Serial No The purchaser must fill in the above information and keep this with the original purchase document. This form must be produced if and when a claim is made under this warranty. QASAIR Rangehoods are made in Ringwood, Australia. Tel: +61 3 9482 7088 Fax: +61 3 9482 7011 Email: sales@condari.com.au

104

Qasair Rangehoods Installation Instructions


Qasair Rangehoods Installation Instructions

105


106

Qasair Rangehoods Installation Instructions


Qasair Rangehoods Installation Instructions

107


DISTRIBUTED IN AUSTRALIA BY CONDARI PTY LTD Tel: 1300 360 563 HEAD OFFICE VIC Tel: 03 9482 7088 Fax: 03 9482 7011 Email: sales@condari.com.au Website: www.condari.com.au

Singapore

YOUR DISTRIBUTORS

NSW/ACT QLD WA SA/NT TAS

Tel: 02 9316 4599 07 3423 3503 08 9242 5387 1300 360 563 03 9482 7088

Tel: Tel: Tel: Tel:

Fax: Fax: Fax: Fax: Fax:

02 07 08 03 03

9316 3282 9201 9482 9482

New Zealand Kouzina Appliances 155 The Strand, Parnell Auckland New Zealand Tel: +64 9 377 7822 Fax: +64 9 377 7824 Email: sales@kouzina.co.nz

9299 9122 0887 7011 7011

Email: Email: Email: Email: Email:

salesnsw@qasair.com.au salesqld@qasair.com.au saleswa@qasair.com.au salessa@qasair.com.au sales@qasair.com.au

Eldric Marketing Pte Ltd 176 Orchard Road #05-03 Centrepoint Singapore 238843 Tel: +65 6369 1188 Fax: +65 6733 8133 Email: enquiry@eldric.sg

CONDARI RESERVES THE RIGHT TO CHANGE SPECIFICATION WITHOUT NOTICE

QASAIR RANGEHOODS MADE IN RINGWOOD 3134

www.condari.com.au

rev. 072015

Qasair Installation Instructions 2015  
Read more
Read more
Similar to
Popular now
Just for you