Issuu on Google+

SURPASS hiD 6610 S312 Fast Ethernet Aggregation Switch Ethernet presents a ubiquitous technology for Local Area Network and Wide Area Network which enjoys a high degree of standardization. Nowadays, Ethernet interfaces are very common and widespread, with almost every network device being equipped with some type of Ethernet interface. Due to its pervasiveness, Ethernet components are very cost-efficient.

In combination with Virtual LAN technology and/or MPLS switching, Ethernet can deliver the same degree of QoS as required from residential and business services that are handled today by SDH/Sonet or ATM/Frame Relay systems. Apart from its cost-saving effects and flexibility, carrier Ethernet will allow network providers to offer new services that can be tailored to the individual needs of the customer. hiD 6610 S312 is cost effective single-board Fast Ethernet switch. Based on the latest IEEE 802.3ah Ethernet First Mile (EFM) standard, each unit within the family has been specifically designed to fulfill a function within a carrier class Ethernet access network. Thanks to their reliability, feature richness and cost-effectiveness, the hiD 6610 S312 can be used for a variety of new, revenue-generating applications, for example as L3 Ethernet LAN switches in high rise buildings or as DSLAM traffic consolidation and aggregation switches.

Additionally, hiD 6610 S312 switch helps to enhance network efficiency through offering dedicated L3 functionality and support of IP-Multicast features to optimize TV broadcast networks. The hiD 6610 S312 single-board Fast Ethernet switch provides 24 electrical Fast Ethernet interfaces of 10/100Base-T as the subscriber’s ports and 4 electrical and 4 optical GE interfaces as the uplink connection. GE interfaces can be used as uplink towards the core network or they are used either to cascade other switches. In order to use the optical uplinks separate pluggable modules (SFPs) have to be delivered for the interfaces. The following different network scenarios with and without subtending of network elements are possible: • Point-to-point networks • Ring networks • Meshed networks


Overview The hiD 6610 S312 single-board Fast Ethernet switch provides 24 ports of 10/100Base-T interface with RJ-45 connector type and 8 ports GE interfaces (4-port combo interfaces) for connection to the IP core network. The hiD 6610 S312 is designed for indoor operation only and installed in the central office.

Connection to the IP network uses the optical or electrical connectors directly on the front panel. 24 ports of Fast Ethernet interface support 10/100Base-T (RJ-45 type). 4 ports of 100/1000Base-X with SFP slots and 4 ports of 10/100/1000Base-T, which are combo interfaces, can be used as uplink towards the core network.

The hiD 6610 S312 is front access switch meaning the interface connections are located on the front of the single-board.

A console interface is for CLI access is also placed on the front panel of the switch.

Access Integrator Ethernet element management ACI-E

hiX 5300 ADSL Modem and splitter

Link ag hiX 5620 hiX 5630 hiX 5635

gregatio

hiD 6650

Voice

n hiD 6670

Dual homing

hiX 5630 hiX 5635 ADSL2+ and VDSL

IP/MPLS hiD 6650

1 and 10 G ERP

Cascading hiD 6610 hiD 6615

hiD 6610 hiD 6615

ISPs

Juniper ERX 1410/1440 hiD 6670

ASPs (e.g. video)

FE/GE opt. and el. 1 G ERP hiD 6650 hiD 6610 hiD 6615 Access, Aggregate and Core

Backbone

Services

Aimed at next-generation carrier networks, the hiD 6610 family provides an end-to-end packet based solution - including various Ethernet in the first mile access options for flexible, cost effective and rapid residential and business broadband rollout, as well as high capacity, powerful metro aggregation and metro core switching infrastructure, with robust, end-to-end network and service management. The hiD 6610 S312 is typically serving as a gateway in the customer premises of enterprises. It can aggregate voice, video and data traffic and prioritize each with their own QoS and SLA. Copyright 200X Nokia Siemens Networks. All rights reserved. Nokia is a registered trademark of Nokia Corporation. Siemens is a registered trademark of Siemens AG. XXX, XXX and XXX are trademarks or registered trademarks of Nokia Siemens Networks Corporation (if there are other trademarks included in the material).

www.nokiasiemensnetworks.com


Specifications

System • 17.6Gbps switching capacity and 9.5Mpps throughput • 24 electrical 10/100Base-TX Fast Ethernet ports • 4 optical 100/1000Base-X Gigabit Ethernet ports • 4 electrical 10/100/1000Base-T Gigabit Ethernet ports • 1 console interface for management access • LED indicators

Network Interfaces • 4 fixed electrical GE interfaces providing electrical GE uplink • 4 fixed optical GE interfaces for SFP modules providing optical GE uplink Uplink Interface • SFP-GE-SX • SFP-GE-LX10 • SFP-GE-LX20 • SFP-GE-LX40

Funtionalities

• SFP-FE-MMF2

• Spanning tree (STP, RSTP, MSTP)

• SFP-FE-SMF15

• Ethernet ring protection (ERP) • Cascading based on electrical and optical Gigabit Ethernet interfaces • Enhanced L3 functionalities • Layer 3 routing functionality (Static, RIP, OSPF, BGP, PIM-SM) • Multicast capabilities (IGMP snooping, static join, MVR) • DHCP relay agent, simplified DHCP option82 and filtering • 8 queues per port policing and shaping • Managing 16 K MAC addresses in MAC table • Access control lists based on port, MAC, EtherType, IP SA/DA, IP multicast address • IEEE 802.1Q tagged frame supporting 4 K VLANs • IEEE 802.3ah EFM OAM • VLAN stacking/translation • VLAN mapping according to port, TOS/DSCP, MAC, IP SA/DA • QoS/CoS mapping according to ingress port, 802.1q, 802.1p, TOS/DSCP, IP SA/DA • Broadcast storm control • Link layer discovery protocol (LLDP)

• SFP-FE-SMF40

Copyright 200X Nokia Siemens Networks. All rights reserved. Nokia is a registered trademark of Nokia Corporation. Siemens is a registered trademark of Siemens AG. XXX, XXX and XXX are trademarks or registered trademarks of Nokia Siemens Networks Corporation (if there are other trademarks included in the material).

Management Interface • Console command line interface (CLI) via RS232 • Inband management via the uplink interface (SNMPv1, v2, v3)

www.nokiasiemensnetworks.com


Design

Figure – Front View of hiD6610 S312

Name Electrical FE i/f Uplink GE i/f CONSOLE MGMT

Function 24 x 10/100Base-T interfaces Connection to the IP network with optical or electrical type interfaces CLI access to configure the functions for system operation Outband TMN-OS Interface

Connector Type RJ45 RJ45 or SFP (combo) RJ45 (RS232) RJ45

Figure – Rear View of hiD6610 S312

You can connect either the DC or AC power supply to the system according to its power module type. Both type of power module is installed on the rear panel. Each type of power module has a single power input.

Copyright 200X Nokia Siemens Networks. All rights reserved. Nokia is a registered trademark of Nokia Corporation. Siemens is a registered trademark of Siemens AG. XXX, XXX and XXX are trademarks or registered trademarks of Nokia Siemens Networks Corporation (if there are other trademarks included in the material).

www.nokiasiemensnetworks.com


Ethernet Switches and Routers - 01-2NSN_DS_hiD6610_S312