Page 1

Accessories & Components ColorFabric Kits feature the most functional line of accessories possible and include profile cut substrates forming wing panels, crown panels, header graphic panels and easily attached standoff graphics.


LightBox Counter Kit

ColorFabric LightBox Counter Kit includes: Structure with 18” x 48” countertop Light Blanket with 5 lights 9.75 sq. ft. tensioned fabric graphic $748 Inline Foot Print: 48” wide x 18” deep x 40” tall


Kit Counter, Half Width

Optional Direct Print Graphic $54 ColorFabric Kit Counter, Half Width includes: Structure and 24� x 18“ countertop 4.5 sq. ft. infill panel $260


Counter Kit, Half Width/Vertical Cabinet

Rear view

ColorFabric Counter Kit, Half Width, Vertical Cabinet includes: Counter structure 24” x 18” countertop 12” deep x 18” wide x 35.5” tall cabinet $610

Optional Standoff Graphic Direct print to substrate includes 4 mounting brackets $136

* Unit is 40” total height


Kit Counter, Basic Design

Optional Graphic Direct print to substrate $110 ColorFabric Kit Counter, Basic Design includes: Counter structure 18” x 48” countertop 9 sq. ft. infill panel $368 * Unit is 40” total height


Kit Counter with Horizontal Cabinet

Rear View Optional Standoff Graphic Direct print to substrate Graphic is 32” wide x 15” tall $136 ColorFabric Kit Counter Horizontal Cabinet includes: Counter structure Single Horizontal Cabinet (12” deep x 18“ wide x 35.5” high) 18” x 48” countertop 4 sq. ft. infill panel $794

* Unit is 40” total height


Kit Counter with Dual Vertical Cabinets

Rear View

ColorFabric Kit Counter Dual Vertical Cabinets includes: Counter structure 2 Vertical Locking Cabinets (12” deep x 18“ wide x 35.5” high) 18” x 48” countertop $995

Optional Standoff Graphic Direct print to substrate 32” Square & includes 4 standoff brackets $172

* Unit is 40” total height


HiLite Light Bracket Extension

Note Extender Bar to get light out over the wing panel $25 each


Kit HiLite Light

ColorFabric Kit HiLite Light includes: bracket $240

Finally a kit light that is also a design element


Garment Accessories

Stepped Garment Bar $85 Garment Bar $45 Bag Holder 3� long $10

Each attaches to system groove. Maximum load = 34 lbs.


Literature Dispenser

Right Side Mount

Center Mount

Left Side Mount

Mounts to system groove $80 each


Product Display Shelves

8” square

Square Shape White or Wood Grain Left or Right Mount $25

12” diameter

Round Shape White or Wood Grain $40

12” deep x 18” wide

Angled for VEE Kits White or Wood Grain $60

Custom Profile Cut Shapes or Specail Colors Available Ask for quote


Panel / Graphic Retainers Panel Retainer Up to 8mm panels Used to attach Crown or Header Panels $28

Panel Retainer Up to 8mm panels Used to attach Wing Panels $28

Panel Retainer with Slot Up to 4mm panels Used to attach Standoff Graphics $56 Panel Retainer Up to 14mm panels Used to attach Standoff Graphics $28


Pair of Wing Panels

Pair of Wing Panels 8mm thick substrate Custom profile cut to desired shape Size up to 47.5” x 24” Larger sizes will not fit into kit crate

Panel Retainer Up to 8mm panels 2 required per panel of pair (4) Locks into system groove

Existing exhibit structure

Pair of panels are stacked, but not attached.

1” gap between panel and structure

NOTE: add at least 25” to each side of footprint when using full size pair of wing panels.


Fabric Wing Panel Straight Wing Bracket, 22� @ $20 ea. Locks into structure groove

Hemmed pocket for bracket

Fabric Graphic Wing Brackets, right or left Front or rear attachment Custom lengths and curves available upon request.

Hemmed pocket for bracket

Locks into structure groove

Straight Wing Bracket, 10� @ $10 ea.


Fabric Wing Position Options

Tapered Fabric Half Wing Clear space between pockets 22” x 44“ x 10” x 46” diagonal Can be positioned with 10” bracket on top or bottom, or used with Rectangle Half Wing

Rectangle Fabric Half Wing Clear space between pockets 22” x 44”

Rectangle Fabric Full 22” Wing Clear space between pockets 22” x 92”

Rectangle Fabric 10” Wing Clear space between pockets 10” x 92”

Tapered Fabric Full Wing Clear space between pockets 22” x 92“ x 10” x 94” diagonal

NOTE: Custom shapes and sizes available upon request


Monitor Mount System

Rear View

Front View Mount for 15”, 17”, 19” & 20” Monitor Comes with 4 - M4 mounting screws Extends 3” from mounting surface $50

Locks into system groove


Optional Monitor Mount Configurations

Monitor Mount A Mounts direct to upright groove $50

Monitor Mount B With lateral cantilever Length of cantilever limited to 16� Orient right or left, $70

Monitor Mount D Horizontal span $90

Monitor Mount C Vertically hangs Length of drop limited to 24� $70


Upright Internal Connector Upper Half of Spliced Upright

Depress button and slide into Upright until button snaps into hole

Upright Internal Connector Two required each upright $30 each

Depress button and slide into Upright until button snaps into hole

Lower Half of Spliced Upright


Cross Internal Connector

Depress button and slide into Cross Beam until button snaps into hole

Depress button and slide into Cross Beam until button snaps into hole

Cross Internal Connector One required each splice $32 Cross beam with lock located on opposite end

Cross beam with lock located on opposite end


Graphic Cable System Upper Standoff Bracket Graphic Cable System Provides the ability to float a solid substrate panel 2-1/2” in front of the seamless tensioned fabric graphic. Panel is 6mm thick with direct to substrate printing. Single panel limited to 48” x 48” size due to packing crate restrictions. Single Graphic Cable Set: 4 - Standoff brackets @ $25 ea. 4 - Grippers (2 right / left per graphic) @ $18 ea. 2 - 8’ long 1/16” cables @ $8 ea.

Left Cable Gripper

Right Cable Gripper Lower Standoff Bracket 8’ long, 1/16” cable


LightBox Kit

Graphic Cable System Setup

Translucent Substrate

Translucent Substrate

Typical ColorFabric LightBox Kit


Graphic Cable System Components

Graphic Cable System Standoff $25 ea. Graphic Cable Example Profile cut 6mm sintra Direct print on substrate Floats 2.5” in front of tensioned fabric graphic 8’ of 1/16” cable @ $1 per foot $8

Cable Gripper for Graphic, Left or Right Grips 3mm to 6mm panel $18 ea.


Kit Cases

Accessory Case 2412 24” x 12” x 8” deep Easily strapped to top of other cases $110

Case 4925 49” x 25” x 8” deep Expandable to 15” deep 2 wheels, molded handle $220

Case 4840 48” x 40” x 24” deep 4 wheels, stackable $724

Case 4848 48” x 48” x 24” deep 4 wheels, stackable $744

ColorFabric Exhibit Kit Accessories & Components  

Available Accessories and Components for Exhibit Kits. Shelves, Lighting Kits, Side Panels, everything you need to finish your Exhibit.

Read more
Read more
Similar to
Popular now
Just for you