LSQT1091_ENG.book 49 ページ
２００６年１１月２７日 月曜日 午後１時１７分
Edit mode ª To cancel the standby for recording When the Camcorder is standby for recording, move the joystick down and select the [∫] icon or press the [∫] button on the remote control. ≥Do not plug or unplug the DV cable during dubbing or the dubbing may not be completed properly. ≥If a picture (bilingual video, etc.) containing main sound and sub sound has been dubbed, select the desired sound by [SETUP] >> [AUDIO OUT] on playback. ≥Even if you use a device equipped with DV terminals such as IEEE1394, you may not be able to perform digital dubbing in some cases. For more information, see the instructions for equipment connected. ≥Regardless of the menu settings on the recorder, digital dubbing is carried out in the same mode as the [AUDIO REC] mode of the playback tape. ≥The images on the recorder monitor may be disturbed, but it does not affect the recorded images. ≥If a picture containing a copyright protection signal (copy guard) is recorded by the Camcorder, the picture is distorted by mosaiclike patterns at playback. ≥Disconnect the USB cable since input signals from the external input terminal cannot be recorded while it is connected with the USB cable. ≥While pictures are input from the DV terminal, the operation icon blinks on instead of appearing from the side of the screen when you press the center of the joy stick. ≥While pictures are input from the DV terminal, the TV aspect will not change even if you change the setting for [TV ASPECT] in the [SETUP] menu. CAUTION: Unauthorized exchanging and/or copying of copyrighted recordings may be copyright infringement.
Audio dubbing You can add music or narration to the recorded cassette. (Audio dubbing can only be performed by using the remote control.) ≥Set to Tape Playback Mode. 1 Find a scene that you want to add sound to and press the [;] button on the remote control. ;
2 Press the [AUDIO DUB] button on the remote control to make audio dubbing ready. A.DUB ;
3 Press the [;] button on the remote control to start audio dubbing. A.DUB ¥
≥Be sure that the sound is directed towards the built-in microphone. 4 Press the [;] button on the remote control to stop audio dubbing.
≥If a tape has a non-recorded portion when the tape is dubbed, images and sounds may be disturbed when this portion of the tape is played back.
Published on Sep 11, 2011