Issuu on Google+

SYDNEY (02) 8814 8133

MELBOURNE (03) 9768 4833 BRISBANE (07) 3209 7299 PERTH (08) 9209 1166

NEW ZEALAND (09) 582 0776

www.cmselectra.com 14.1.14


CMS Quick Flex 5 Pole Cabling Solution The CMS 5 Pole product is a tried and tested system being used into major projects across Australia and New Zealand for the past ten years. The CMS Quick flex cabling solution is a modular five pole softwiring system for Dali, DSI, CBUS, KNX & other systems requiring 5 wire lighting systems. CMS Quick Flex Cabling has its own unique CMS connector system which insures excellent conductivity without the concern of separation at joints. Connectors can only be separated by a tool. CMS Quick Flex Cabling Solution is ideal for the following applications: Education, Retail, Health, Commercial Offices, Airports & Public Sectors. CMS Electracom are able to supply large quantities of our Quick flex products, in most cases, at short notice due to large stockholdings across all major capital cities in Australia and New Zealand. The existing relationships with prominent education institutions, consulting engineers and leading electrical engineers contractors around Australia & New Zealand ensure priority service and proactive response by professionally trained CMS personnel. The use of the CMS Quick flex modular wiring system will drastically reduce installation time for the contractor, delivering you cost savings on site. The 5 Pole modular wiring system is increasing amongst new projects in Australia and New Zealand, and is being specified more frequently by designers and engineers. The energy efficiencies achieved by this form of modular wiring delivers exceptional cost savings, and most importantly sustainable design solution management to the end-user.

CMS is committed to contributing to sustainable design At CMS, we have long been of the opinion that environmental issues must be factored into the building design of the future. CMS Electracom is a company committed to Corporate Social Responsibility. How we implement this is through product stewardship, best practise purchasing to meet Australian standards, bringing alternative and reduced environmental impact products to our clients. The Quick Flex system is environmentally friendly, having ROHS and Best Environmental Practice Certification. To ensure your project adheres to Green Star rating, CMS have direct access to supply certified PVC-Free cabling system that have been stringently tested by independent laboratories to meet Green Star compliance.

SYDNEY (02) 8814 8133

1

MELBOURNE (03) 9768 4833 BRISBANE (07) 3209 7299 PERTH (08) 9209 1166

NEW ZEALAND (09) 582 0776

www.cmselectra.com 14.1.14


Features & Benefits of CMS 5 Pole Solution ♦

Installation time for the contractor is drastically reduced, delivering up to 30% reduction in labour costs

Reduction in Waste - Zero onsite material waste

Uncomplicated wiring layout, requiring only 4 components for a total solution!

Cost & Energy Efficient

Safe & Easy Maintenance - isolation during maintenance by removing a single light lead from the bank of ‘T’ pieces.

Simple integration

Why deal with CMS Electracom?

Supplying wiring & power solutions since 1979

Access to industry trained professionals

Ability to supply small to large orders to meet your project schedules

Dedicated CMS designers and engineers to support custom solutions

Local support by CMS Offices in Sydney, Melbourne, Brisbane, Perth, Auckland, London & Singapore

SYDNEY (02) 8814 8133 14.1.14

MELBOURNE (03) 9768 4833 BRISBANE (07) 3209 7299 PERTH (08) 9209 1166

NEW ZEALAND (09) 582 0776

www.cmselectra.com

2


CMS Quick Flex 5 Pole Installation Examples

How we work?

1)

Design

2)

Develop

3)

Deliver

SYDNEY (02) 8814 8133

3

CMS will take you through the process from concept to completion of wiring and power requirements.

CMS experienced team of professionals are trained to provide consultation, estimating & engineering support to all your project needs.

MELBOURNE (03) 9768 4833 BRISBANE (07) 3209 7299 PERTH (08) 9209 1166

NEW ZEALAND (09) 582 0776

www.cmselectra.com 14.1.14


Introducing the CMS 5 Pole Solution Image

Part Number

Description

QF1

Starter Socket - Transition between hard and softwiring Tunnel terminals to A5.2 Socket

QF2

Interconnecting Lead, 5 core, 3x2.5mm² (A,N,E) & 2x1.5mm² Dali, A5 Socket to Plug

QF3

Supply Cable, A5.1 Plug to free end, 5 core, 3x2.5mm² (A,N,E) & 2x1.5mm² Dali.

QFS3

A5.2 Socket to free end, 5 core, 3x2.5mm² (A,N,E) & 2x1.5mm² Dali

QF3a

Supply Cable, A5.1 Plug to free end, 5x1.0mm², maximum 2.5metres

For Special Project Pricing, Email Your Plans To estimating@cmselectra.com SYDNEY (02) 8814 8133 14.1.14

MELBOURNE (03) 9768 4833 BRISBANE (07) 3209 7299 PERTH (08) 9209 1166

NEW ZEALAND (09) 582 0776

www.cmselectra.com

4


Image

Part Number

Description

QF3b

Supply Cable, A5.1 Plug to B5.2 Socket. Mates with QF6 Light Plug. 3x2.5mm² (A,N,E) & 2x1.5mm² Dali.

QF3c

Supply Cable, A5.1 Plug to B5.2 Socket. Mates with QF6 Light Plug. 5x1.0mm², maximum 2.5metres

QF4

A5 Plug/Socket with tails for direct connection.

QF5

Interceptor allows splitting of Dali & Power circuits, i.e. when adding new power circuit.

QF6

Lighting Adaptor B5.1 Plug - Push fit termination.

Design & Estimating Support for all your Project Needs

SYDNEY (02) 8814 8133

5

MELBOURNE (03) 9768 4833 BRISBANE (07) 3209 7299 PERTH (08) 9209 1166

NEW ZEALAND (09) 582 0776

www.cmselectra.com 14.1.14


Image

Part Number

B5T

B5.212

A5.T

SYDNEY (02) 8814 8133 14.1.14

Description

‘T’ Adaptor IN/OUT A5 connector and B5.2 Lighting Socket.

B Type Socket - Rewireable.

‘T’ Adaptor 1 IN/2OUT A5 connector.

MELBOURNE (03) 9768 4833 BRISBANE (07) 3209 7299 PERTH (08) 9209 1166

NEW ZEALAND (09) 582 0776

www.cmselectra.com

6


5 POLE PLUG & SOCKET The CMS 5 pole plug base is the latest socket designed by CMS Electracom suitable for Dali, DSI and BMS lighting control networks. The system is used as an alternative to our Quick Flex 5 pole ‘plug and play’ system. The CMS 5 Pole plug base will also accept a standard Australian 3 pin plug so you can future proof your next installation if a lighting control system is desired at a later stage.

QF75 Shown

Nearly every new office today incorporates some level of intelligent light level sensors, movement sensors, zoned lighting scene setting and time clocks. In areas where you have exposed ceilings or long distance between light fittings/devices the CMS 5 pole plug base system will provide a convenient and cost effective solution for your next installation.

5 Pin plug shown ORDERING INFORMATION PART NO.

DESCRIPTION

QF75WT

Single 10Amp 250v 5 pin Socket - White

QF7A-25BK

2500mm 5pin ROHS Light lead 10amp 5 x 1.0mm² - Black

QF7A-100BK

10,000mm 5pin ROHS Light lead 10amp 5 x 1.0mm² - Black

QF7A-25WT

2500mm 5pin ROHS Light lead 10amp 5 x 1.0mm² - White

QF7A-100WT

10,000mm 5pin ROHS Light lead 10amp 5 x 1.0mm² - White

PLEASE CALL US FOR THE MOST UP TO DATE SPECIFICATIONS AND PRICING

Notes: -

Standard colour for light lead is Black (BK) or White (WT) Standard colour for 5 Pin socket is White (WT)

SYDNEY (02) 8814 8133

7

MELBOURNE (03) 9768 4833 BRISBANE (07) 3209 7299 PERTH (08) 9209 1166

NEW ZEALAND (09) 582 0776

www.cmselectra.com 14.1.14


5 Pole Dali 5pin Plug Base Application Part No: QF75 Step 1:

Step 1: Strip cable to recommended length.

Step 2:

Step 2: Terminate cable wiring into terminal blocks, ensure correct polarity, use break-out areas in socket body to allow cable entry and exit.

Step 3: Mount unit using screw mounting holes onto industry standard conduit mounting block or use mounting plate provided. Step 3:

Rating - 10A 250V a.c Conductor range - 1.0mm2 to 2.5mm2 solid/ stranded to AS/NZS5000 This product must be installed by a qualified electrician. Disconnect power supply before connecting or disconnecting this product. Active contacts rated low voltage max. 10Amps

SYDNEY (02) 8814 8133 14.1.14

MELBOURNE (03) 9768 4833 BRISBANE (07) 3209 7299 PERTH (08) 9209 1166

NEW ZEALAND (09) 582 0776

www.cmselectra.com

8


CMS QUICK FLEX QF75-02

QF75-02 5-pin Socket

QF7A-25 5-pin plug shown in black

The Quick Flex QF75-02 provides a simplified solution for creating a modular DALI, DSI, CBus or BMS backbone allowing for direct retrofit of a 3-pin install, whilst providing the foundation for future intelligent lighting fit outs. Utilising QF7A Light lead/5-pin plugs together with QF2 interconnecting leads, the Quick Flex QF72-02 socket makes quick and easy work of daisy-chaining multiple luminaires into a service outlet. Inclusion of both hardwired and continuous-line mounting provide flexible installation options catering to any application. The 5-pin outlet also directly accepts the retrofit of AS/NZS 3112 standard 3-pin plugs for existing installations with the option to upgrade to an intelligent lighting control system in the future. With labour and project costs in mind, the Quick Flex QF75-02, used together with CMS adaptors and installation couplers, delivers a time-saving, cost-effective and flexible solution for new or planned intelligent lighting applications.

ORDERING INFORMATION PART NO.

DESCRIPTION

QF75-02BK

Dual socket 10amp 250v 5pin socket - Black only

QF7A-25**

Light lead free end to CMS 5pin plug - 2500mm

QF7A-100**

Light lead free end to CMS 5pin plug - 10,000mm

Notes: -

**Denotes colour is White (WT) or Black (BK) (for light lead only)

-

For associated parts refer CMS catalogue Dali products section pages 1- 8

SYDNEY (02) 8814 8133

9

MELBOURNE (03) 9768 4833 BRISBANE (07) 3209 7299 PERTH (08) 9209 1166

NEW ZEALAND (09) 582 0776

www.cmselectra.com 27.11.14


QF75-02 Installation Manual

1.

Mount the QF7502 unit using the mounting holes provided using screws suitable to your application. Alternatively, hang the QF7502 to wire by using the clip feature of the product.

2.

Plug the appropriate QF interconnecting leads or T-piece connectors into the QF7502 as in the example shown. (see CMS catalogue for more information) The QF7502 utilises the 5 pin QF7A CMS plug and will also accept Australian standard 3 pin plugs.

3.

The two extra pins (DA L2 and DA L3) can be used as alternative 250V 10A connections or for low voltage Dali signals. It must be noted that the total output load rating of the product is 10A single phase and this must not be exceeded in any way or by any configuration of inputs.

This product must be installed by a qualified electrician. Disconnect power supply before connecting or disconnecting this product. Active contacts rated low voltage max. 10Amps Product tested rating 20A 250V/50Hz A.C

SYDNEY (02) 8814 8133 17.11.14

MELBOURNE (03) 9768 4833 BRISBANE (07) 3209 7299 PERTH (08) 9209 1166

NEW ZEALAND (09) 582 0776

www.cmselectra.com

10


CMS Quick Flex Dali Brochure