BELTPRESS The sieve belt press is designed to remove water from sludge / manure by mechanical means. It uses gravity and the forces generated by filter belts that are guided around the rollers with increasing pressure. The sludge / manure remains on the belt, the water is discharged. The process begins with the injec�on of polymer into the slurry. The flocculated manure is brought to the screen belt press through a main distributor. The first phase of dewatering is the gravity zone for which so called chicanes are placed that accelerate the dewatering in this phase and can op�mally drain the released water by crea�ng free dewatering slots. The thickened manure then makes the gentle transi�on to the next phase of dewatering: the wedge zone. In the wedge zone, pressure is applied to both the top and bo�om of the manure. The final dewatering stage is the high-pressure zone, where the highest pressure allowed for certain manure is applied to dewater the remainder.
Polydoser
BELTPRESS
Supply Pump Number of units
1
Capacity
12 m³/h
Power
3 kW
The polydoser is a standalone installa�on where powder polymers can be used. Number of units
1
Capacity
2 m³/h
Dewatering table
Beltpress
The first filtra�on is done by a dewatering table on top of the beltpress. In this unit the 'free' water falls down without pressure and be can disposed by a seperate pipe
Number of units
1
Capacity
5 or 12,5 m³/h
Type
SMX-Q1000 or 2000
Number of units
1
Capacity
Same as beltpress
Power
3 kW
Herastraat 15, 5047 TX Tilburg info@circularvalues.eu | www.circularvalues.eu