Page 1

Niko Home Automation 2009-2010


Introduction

Introduction Hello from Niko 2009 sees us celebrating our 90th Anniversary, with Niko’s comprehensive range of home automation solutions going from strength to strength. Our aim is simply to provide our customers with an easy, intuitive, and user-friendly solution for all their home automation needs whether they need electrical switching, lighting control, home automation, audio distribution, or all of the above! Similarly it is our goal to make the task for our installers as ‘problemfree’ as possible, enabling a faster, smoother installation for both consumer and installer alike. In fact, all over the world individuals and professional customers choose Niko’s quality solutions precisely because of their ease of installation, ease of programming, ease of use, and quality of design.

www.n i k o u k . c o m

1


Contents Case Studies

Contents

Wavendon – Exclusive Boutique B&B . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Sarratt – Converted Church . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26 Mysterious Invisible Switches . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32

Nikobus Modules . . . . . . Home automation . IR Remotes . . . . Wireless Switches . Push Buttons . . . Interfaces . . . . . Circuit boards . . .

. . . . . . .

. . . . . . .

. . . . . . .

. . . . . . .

. . . . . . .

. . . . . . .

. . . . . . .

. . . . . . .

. . . . . . .

. . . . . . .

. . . . . . .

. . . . . . .

. . . . . . .

. . . . . . .

. . . . . . .

. . . . . . .

. . . . . . .

. . . . . . .

. . . . . . .

. . . . . . .

. . . . . . .

. . . . . . .

. . . . . . .

. . . . . . .

. . . . . . .

. . . . . . .

. . . . . . .

. . . . . . .

. . . . . . .

. . . . . . .

. . . . . . .

. . . . . . .

. . . . . . .

. . . . . . .

. . . . . . .

. . . . . . .

. . . . . . .

. . . . . . .

. . . . . . .

. . . . . . .

.8 11 11 12 14 17 18

Sensors Sensors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20

Transformers Transformers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21

Lighting Lighting Controllers . LED Strips . . . . . . DIN rail supplies . . . Power Supplies . . . Accessories . . . . . RGB LED Control . .

. . . . . .

. . . . . .

. . . . . .

. . . . . .

. . . . . .

. . . . . .

. . . . . .

. . . . . .

. . . . . .

. . . . . .

. . . . . .

. . . . . .

. . . . . .

. . . . . .

. . . . . .

. . . . . .

. . . . . .

. . . . . .

. . . . . .

. . . . . .

. . . . . .

. . . . . .

. . . . . .

. . . . . .

. . . . . .

. . . . . .

. . . . . .

. . . . . .

. . . . . .

. . . . . .

. . . . . .

. . . . . .

. . . . . .

. . . . . .

. . . . . .

. . . . . .

. . . . . .

. . . . . .

. . . . . .

22 24 25 25 28 29

Media Media Network . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31 Audio Distribution . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33

Mysterious Mysterious . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34

Wiring Diagrams Wiring Diagrams . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37

Colour Chart Colour Chart . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51

Index Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52 ©2009 Niko (UK) Limited. All rights reserved. Specifications are subject to change without notice. Whilst every effort is made to ensure the accuracy of the information in this catalogue, no responsibility can be held for typographical or other innacuracies. E & OE.

www.n i k o u k . c o m

Photography in this catalogue by: Liesbet Goetschalckx, Belgium and Philip Reeson, UK.

3


Wavendon Case Study

& Boutique BB

ko Wave horizontal

4

Exclusive

Set in the Buckinghamshire countryside and yet just minutes from main routes is a purpose built boutique bed and breakfast.

Designed to provide the best accommodation for holidaymakers and businessmen, whether able-bodied, or disabled, this stylish and comfortable bed and breakfast demonstrates the flexibility of the Nikobus system and its lighting controls in particular. Access and security was a major consideration here with the accommodation designed to be as easy to use for wheelchair users with all areas easily reached. All of the accommodation is on one level, with all of the bedrooms opening onto the garden, and one room even having its own parking space and a door straight in from the car park.

Ensuring a warm welcome

versions

Communication with the house is important - as a B&B, the front door is not left open, so it is vital that visitors are made to feel welcome - even at the push of a doorbell. This is achieved by integrating a door access system with an intercom with the office inside the house. The door can be answered immediately by voice and then automatically opened if desired. A camera was not introduced here, but it could be incorporated, with

the pictures broadcast on computers, television screens or touchscreen controllers.

www.n ikouk.com


Ease of use was imperative in this installation - with such a frequent turnover of guests - it was vital that new guests could intuitively use the push-button controls to achieve the correct level of lighting in each room. Motion sensors were installed in the common areas so that guests would be able to easily find their way at night without needing to access light switches in the dark. Working with specialist lighting designers, the owner of this impressive establishment wanted to achieve an environment of light spacious rooms that would deliver a high specification and level of luxury enabling guests to immediately feel ‘at home’ in their accommodation. Niko’s pushbutton controls in each of the bedrooms and bathrooms ensured that this was achieved allowing for maximum flexibility - controlling overhead and bedside lights from the same 8-button switch. Low level LED lighting allows for nightlights to be left on overnight very economically; allowing for easy navigation of the room even in the middle of the night, without unnecessary searching to find switches in a strange room. This is another function that each guest can select from the 8-button selection available in each bedroom.

The distinctive light fittings chosen for each room are also controlled using the Nikobus system. Whilst providing the full selection of features you would expect with the most sophisticated system – it can create any lightscene, all of which can be easily designed and stored. Any one-button commands such as all lights to off and lighting pathways are easily introduced or changed, and silent and speed-programmable dimmers are also part of the system, as required.

Integrating the look Integrating the switches with the decor was another key feature of this installation. One of the bedrooms has been designed with the disabled, including visually impaired guests in mind. This room has been designed with a stunning decor featuring bold colours such as red - both as a design statement and to make navigation easier for people with restricted

www.n i k o u k . c o m

Wavendon Case Study

Ease of use

5


Wavendon Case Study

vision. Niko switches can be put together in a wide variety of colour options - allowing for the border of the switch and the inner switch area to be in contrasting colours. Exterior lighting has been designed to ensure a warm welcome on arrival at the B&B, with the option of light sensors to automatically switch lights on at dusk - and off if desired at a pre-selected time; alternatively motion sensors can be used, or straightforward On/Off switching.

Attention to detail

ko Wave horizontal

6

versions

Throughout this building, attention to detail has been the watchword. Ensuring that the many pieces of artwork are displayed with the appropriate level of lighting was a

major consideration of the brief. Stunning light fittings make a statement in each of the rooms giving each room its own character and ambience. Motorised blinds ensure that the rooflights can be covered to keep out light and the introduction of floor level LEDs make each room very easy to stay in and navigate around. The panel housing all of the lighting controls is easily hidden away in a cupboard, and with its DIN rail configuration, it is always an option to extend and develop the system over time. This boutique hotel has needed a lot of time and thought to achieve its high standards of comfort and hospitality - and the Niko system was a key ingredient in putting it all together.

www.n ikouk.com


Nikobus

- easy to install - easy to program - easy toAd use

... your home your www.n i k o u k . c o m

7


Nikobus

Nikobus Modules

Putting you in control of your home The Nikobus output modules are at the core of any Niko installation and feature switching, shuttering, dim control, and audio options. Offering 4-12 outputs (depending on the model), they enable the user to freely assign a function to each output. Although each module contains one power supply, only one of those power supplies is active for the entire installation – with the others taking over automatically should a defect occur with the first supply. This guarantees that Nikobus keeps working at all times.

Switch Controller The switch controller is provided with 12 internal relays to control electrical appliances throughout the installation. Features include an isolated power supply, two separate 230V inputs, programming buttons, a microprocessor, and diagnostic reporting.

• Dimensions: 251mm x 88mm x 60mm • Switchable Outputs: 12 x 230V/10A relays. • Bus Connection: 9V DC SELV (Safety Extra Low Voltage) • CE Compliant

05-000-02

Compact Switch Controller The compact switching unit provides 4 output contacts for the control • Dimensions: 4 DIN of electrical appliances, enabling 16 programmable running times and • Bus Connection: 9V DC SELV (Safety Extra Low Voltage) 3 operating times from each push-button function. The unit contains • CE Compliant a built-in power supply for an entire Nikobus installation. 05-002-02

Dim Controller versions

ko Wave horizontal

The Dimcontroller can create and store light scenes, • Dimensions: 251mm x 88mm x 60mm with each scene activated by a single key rather than • Switchable Outputs: each individual light source. Different light scenes can 12 x 0-10V, 2mA outputs. • Bus Connection: 9V DC SELV be set or changed by the user at any time. (Safety Extra Low Voltage)

05-007-02

Compact Dim Controller The Compact Dim Controller features 4 voltage controlled 0-10V outputs that can each control several power dimmers. A push button controls different light scenes, with scenes able to be set or changed by the user.

• Dimensions: 4 DIN • Bus Connection: 9V DC SELV (Safety Extra Low Voltage) • CE Compliant

05-008-02

Universal Modular Dimmer 750VA (3A) Dimmer is suitable for incandescent lamps, 230V and all types of low voltage halogen lamps. The dimmer can control up to 30 push buttons and features a set of feedback LEDs, with additional memory for saving one atmosphere via push button control. Complies with European directives for EMC & safety EN60669-2-1. Also features overload protection with automatic reboot function and electronic short circuit protection.

• Ferromagnetic Transformer: 750VA • Toroidal Core Transformer: 750VA • Electronic Transformer: 750VA • Min. Load: 60W/60VA • Dimenssions (DIN 2): 90 x 35 x 66mm • PLC Filter for interference via the mains

05-715

8

www.n ikouk.com


Universal Modular Dimmer 1400VA (6A) Dimmer is suitable for incandescent lamps, 230V and all types of low voltage halogen lamps. The dimmer can control up to 30 push buttons and features a set of feedback LEDs, with additional memory for saving one atmosphere via push button control and an integrated staircase function. Complies with European directives for EMC & safety EN60669-2-1. Also features overload protection with automatic reboot function and electronic short circuit protection.

• Ferromagnetic Transformer: 1400VA • Toroidal Core Transformer: 1400VA • Electronic Transformer: 1400VA • Min. Load: 100W/100VA • Dimensions (DIN 6): 89 x 105 x 60mm • PLC Filter for interference via the mains

Nikobus

Nikobus Modules

65-410

Shutter Controller The shutter controller controls motor-driven systems like shutters, curtains, and sunblinds. Features include two 230V inputs and diagnostic reporting.

• Dimensions: 251mm x 88mm x 60mm • Switchable Outputs: 6 motors per unit • Bus Connection: 9V DC SELV (Safety Extra Low Voltage) • CE Compliant

05-001-02

Audio Link The Audio-Link connects the Allegretto A44 and A88 audio distribution systems to all Nikobus control buttons.

• Characteristics: - LCD screen for programming & status display - 2 Nikobus inputs - 230V Connection

05-205

PC Logic

This unit features numerous logic functions to accommodate all possible conditions alongside 6 digital inputs for external contacts & sensors, and 2 bus connections. Includes PC connection cables and software.

• Dimensions: 4 DIN • Bus Connection: 2 bus connections, 9V DC SELV (Safety Extra Low Voltage) • CE Compliant

05-201

PC Link

SMS Modem “Tango”

This unit allows manual control and remote programming via a PC.

The SMS Modem must always be used with the PC Logic (05-201) and enables switching from a distance as well as a handy warning in case of emergencies. Includes Nikobus cable.

• Dimensions: 4 DIN • Bus Connection: 9V DC SELV (Safety Extra Low Voltage) • CE Compliant 05-200

05-203-01

Modular RF Interface Modular RF Interface for the Nikobus Home Automation System, which requires a 230V power supply and applies Rf signals to the bus – allowing all of the Nikobus functions to be operated without any wiring. Only one RF Interface is required per installation.

05-300 www.n i k o u k . c o m

9


Nikobus

ko Wave horizontal

10

Home Automation

- easy to install - easy to program - easy to use

versions

... your home your www.n ikouk.com


Nikobus

Home Automation

Total control throughout the home Thanks to Niko’s intelligent management system, the home can now be tailored to suit the future needs of any client. Programming of functions can be done either manually, or via PC, and because the printed circuit boards can be mounted both horizontally and vertically, you’ll only need one flush mounting box.

Touch Screen The Nikobus Touch Screen can be easily mounted on the wall and allows simple control of up to 60 two-button functions. Maximum of 5 Touch Screens per installation.

• Dimensions: 118 x 2226 x 20mm • IP Class: IP21

05-096

Feedback Module The DIN rail module connects the feedback keys or Touch Screen to the Nikobus installation. Up to 24 bus push buttons with feedback and one Touch Screen can be used with each module, and there is a maximum limit of 24 bus push buttons or 5 Touch Screens per installation. Must be programmed via PC.

• Dimensions: 4U (70 x 90 x 62mm) • Cabling: 2 x 0.8mm

05-207

IR Remotes

Freedom within easy reach Niko Remote Controls allow freedom of control wherever you are in the home – allowing you to manage all the elements of your installation at the push of a button; even through walls. Optimum comfort within easy reach!

IR Remote With 4 channels and 4 control keys, this IR Remote is able to carry out 4 functions per channel, for 16 different functions in total.

• Power Supply: 2 x 1.5V AAA batteries.

05-088 www.n i k o u k . c o m

11


Nikobus

Wireless Switching

No compromise - switches where you need them With Niko’s RF Interfaces, fully wireless home automation is now possible, allowing almost anything to link up with the Nikobus without the need for excessive or impractical extra cabling. Again easy to install as well as use, programming with the wireless switches can be done either manually or via the use of a PC, giving you total control of every aspect of your Niko Installation.

Switch with 2 Control Keys This wireless switch controls up to 2 circuits independently (depending on the settings of the receivers) and can be used for 1 or 2 button functions. It can be mounted via glue strips or screw fixings (both supplied) and has a range of 30m indoors, and 100m outdoors. Requires Base Unit 410-00001 & 05-300 Simple Key

xxx-00001*

Simple Key with I & O

xxx-00002*

Simple Key with I/O

xxx-00003*

Simple Key with ‘Up’ & ‘Down’

xxx-00004*

Switch with 4 Control Keys

ko Wave horizontal

versions

This wireless switch controls up to 4 circuits independently (depending on the settings of the receivers) and can be used for 1, 2, or 4 button functions. It can be mounted via glue strips or screw fixings (both supplied) and has a range of 30m indoors, and 100m outdoors. Requires Base Unit 410-00002 & 05-300

Double Key

xxx-00007*

Double Key with I/O

xxx-00008*

Double Key with I/O

xxx-00009*

Double Key with ‘Up’/‘Down’

xxx-00010*

Double Key with ‘Up’/’Down’

xxx-00011*

Double Key with Label

xxx-00012*

Double Key with Ventilator Indication 0 – 3

xxx-00013*

Double Key with Source Selection, on/off, vol + & vol - xxx-00014*

Switch with 8 Control Keys This wireless switch controls up to 8 circuits independently (depending on the settings of the receivers) and can be used for 1 or 2 button functions. It can be mounted via glue strips or screw fixings (both supplied) and has a range of 30m indoors, and 100m outdoors. Requires Base Unit 410-00003 & 05-300 4 Fold Key

xxx-00015*

4 Fold Key with I & O

xxx-00016*

4 Fold Key with I/O

xxx-00017*

4 Fold Key with ‘Up & ‘Down’

xxx-00018*

4 Fold Key with ‘Up’/’Down’

xxx-00019*

4 Fold Key with 1 to 8

xxx-00020*

4 Fold Key with Source Selection, on/off,1-4, vol + & vol -

12

xxx-00021* * xxx Denotes colour choice – please see p51.

www.n ikouk.com


Multifunction Switching - easy to install - easy to program LED Lighting - easy to use

Ad

www.n i k o u k . c o m

... your home your

13


Nikobus

Nikobus Push Buttons

Easy control at the touch of a button Transferring information to and from the Nikobus, Niko Push buttons are far more than the average control switch. Fully programmable for a multitude of functions, they bring total freedom of control to any room where the only limitation is your imagination.

2 Control Keys

ko Wave horizontal

versions

• Bus Connection: 9V DC In the Nikobus system, the bus push buttons are (SELV, safety extra low voltage) information transmitters. The Nikobus push button • Connection to Nikobus: does not require any programming as every push 2 wire connection button has a unique address. Each push button is fixed to the wall mounted printed circuit board via a click mechanism with contact springs providing the connections between the push buttons and the wall mounted printed circuit boards. This push button carries out 2 controls. Requires Base Unit 05-060-01

Simple Key

xxx-00001*

Simple Key with I & O

xxx-00002*

Simple Key with I/O

xxx-00003*

Simple Key with ‘Up’ & ‘Down’

xxx-00004*

Simple Key with ‘Up’/’Down’

xxx-00005*

Simple Key with Text Field

xxx-00006*

2 Control Keys + LED • Bus Connection: 9V DC In the Nikobus system, the bus push buttons are (SELV, safety extra low voltage) information transmitters. The Nikobus push button • Connection to Nikobus: does not require any programming as every push 2 wire connection button has a unique address. Each push button is fixed to the wall mounted printed circuit board via a click mechanism with contact springs providing the connections between the push buttons and the wall mounted printed circuit boards. This push button carries out 2 controls. Requires Base Unit 05-061-01

14

Simple Key

xxx-00024*

Simple Key with I & O

xxx-00025*

Simple Key with I/O

xxx-00026*

Simple Key with ‘Up’ & ‘Down’

xxx-00027*

Simple Key with ‘Up’/’Down’

xxx-00028*

Simple Key with text field

xxx-00029*

* xxx Denotes colour choice – please see p51.

www.n ikouk.com


2 Control Keys with 2 Feedback LEDS • Bus Connection: 9V DC In the Nikobus system, the bus push buttons are information transmitters. The Nikobus push button does (SELV, safety extra low voltage) not require any programming as every push button has • Connection to Nikobus: 2 wire connection a unique address. Each push button is fixed to the wall mounted printed circuit board via a click mechanism with contact springs providing the connections between the push buttons and the wall mounted printed circuit boards. This push button carries out 2 controls. Feedback via Feedback Module 05-207. Requires Base Unit 05-060-02 Simple Key

xxx-00024*

Simple Key with I & O

xxx-00025*

Simple Key with I/O

xxx-00026*

Simple Key with ‘Up’ & ‘Down’

xxx-00027*

Simple Key with ‘Up’/’Down’

xxx-00028*

Simple Key with Text Field

xxx-00029*

Nikobus

Nikobus Push Buttons

2 Control Keys with IR Receiver In the Nikobus system, the bus push buttons are information transmitters. The Nikobus push button does not require any programming as every push button has a unique address. Each push button is fixed to the wall mounted printed circuit board via a click mechanism with contact springs providing the connections between the push buttons and the wall mounted printed circuit boards. This push button carries out 2 controls. Requires Base Unit 05-081-01

• Bus Connection: 9V DC (SELV, safety extra low voltage) • Connection to Nikobus: 2 wire connection

Single Control Key

xxx-00022*

4 Control Keys In the Nikobus system, the bus push buttons are information transmitters. The Nikobus push button does not require any programming as every push button has a unique address. Each push button is fixed to the wall mounted printed circuit board via a click mechanism with contact springs providing the connections between the push buttons and the wall mounted printed circuit boards. This push button carries out 4 controls. Requires Base Unit 05-064-01

• Bus Connection: 9V DC (SELV, safety extra low voltage) • Connection to Nikobus: 2 wire connection

Double Key

xxx-00007*

Double Key with I & O

xxx-00008*

Double Key with I/O

xxx-00009*

Double Key with ‘Up’ & ‘Down’

xxx-00010*

Double Key with ‘Up’/’Down’

xxx-00011*

Double Key with Label

xxx-00012*

Double Key with ventilator indication 0-3

xxx-00013*

Double Key with Source Selection, on/off, vol + & vol -

xxx-00014*

* xxx Denotes colour choice – please see p51.

www.n i k o u k . c o m

15


Nikobus

Nikobus Push Buttons 4 Control Keys with 4 Feedback LEDs In the Nikobus system, the bus push buttons are information transmitters. • Bus Connection: 9V DC (SELV, safety extra low The Nikobus push button does not require any programming as every push voltage) button has a unique address. Each push button is fixed to the wall mounted • Connection to Nikobus: printed circuit board via a click mechanism with contact springs providing 4 wire connection the connections between the push buttons and the wall mounted printed circuit boards. This push button carries out 4 controls. Feedback via Feedback Module 05-207. Requires Base Unit 05-064-02 Double Key

xxx-00033*

Double Key with I & O

xxx-00034*

Double Key with I/O

xxx-00035*

Double Key with ‘Up’ & ‘Down’

xxx-00036*

Double Key with ‘Up’/’Down’

xxx-00037*

Double Key with Label

xxx-00038*

4 Control Keys with 4 Feedback LEDs for Regime Function In the Nikobus system, the bus push buttons are information transmitters. • Bus Connection: 9V DC (SELV, safety extra low The Nikobus push button does not require any programming as every push voltage) button has a unique address. Each push button is fixed to the wall mounted • Connection to Nikobus: printed circuit board via a click mechanism with contact springs providing 4 wire connection the connections between the push buttons and the wall mounted printed circuit boards. This push button carries out 4 controls. Regime feedback via PC Link 05-200 Requires Base Unit 05-074-01 Double Push Button with Regime Print

xxx-00099*

4 Control Keys with IR Receiver

versions ko Wave horizontal

In the Nikobus system, the bus push buttons are information transmitters. • Bus Connection: 9V DC (SELV, safety extra low The Nikobus push button does not require any programming as every push voltage) button has a unique address. Each push button is fixed to the wall mounted • Connection to Nikobus: printed circuit board via a click mechanism with contact springs providing 4 wire connection the connections between the push buttons and the wall mounted printed circuit boards. This push button carries out 4 controls. Regime feedback via PC Link 05-200 Requires Base Unit 05-085-01

Double Key

xxx-00032*

8 Control Keys In the Nikobus system, the bus push buttons are information transmitters. • Bus Connection: 9V DC (SELV, safety extra low The Nikobus push button does not require any programming as every push voltage) button has a unique address. Each push button is fixed to the wall mounted • Connection to Nikobus: printed circuit board via a click mechanism with contact springs providing 2 wire connection the connections between the push buttons and the wall mounted printed circuit boards. This push button carries out 8 controls. Requires Base Unit 05-078-01 4 Fold Key

xxx-00015*

4 Fold Key with I & O

xxx-00016*

4 Fold Key with I/O

xxx-00017*

4 Fold Key with ‘Up & ‘Down’

xxx-00018*

4 Fold Key with ‘Up’/’Down’

xxx-00019*

4 Fold Key with 1 – 8

xxx-00020*

4 Fold Key with Source Selection, on/off, 1-4, vol + & vol -

16

xxx-00021* * xxx Denotes colour choice – please see p51.

www.n ikouk.com


8 Control Keys with 8 Feedback LEDs In the Nikobus system, the bus push buttons are information • Bus Connection: 9V DC (SELV, safety extra low voltage) transmitters. The Nikobus push button does not require any • Connection to Nikobus: programming as every push button has a unique address. 4 wire connection Each push button is fixed to the wall mounted printed circuit board via a click mechanism with contact springs providing the connections between the push buttons and the wall mounted printed circuit boards. This push button carries out 8 controls. Feedback via Feedback Module 05-207. Requires Base Unit 05-078-02 4 Fold Key

xxx-00042*

4 Fold Key with I & O

xxx-00043*

4 Fold Key with I/O

xxx-00044*

4 Fold Key with ‘Up & ‘Down’

xxx-00045*

4 Fold Key with ‘Up’/’Down’

xxx-00046*

4 Fold Key with 1 – 8

xxx-00047*

Nikobus

Nikobus Push Buttons

* xxx Denotes colour choice – please see p51.

Interfaces

Total control… anywhere Niko Interfaces were created in order to make the best use of any peripheral equipment, enabling a simpler, more effective connection of mechanical switches and push buttons to the Nikobus. Niko has also created RF Interfaces to bring the simplicity of wireless control to any installation – whether it is in a new, or renovated, property.

Nikobus

Interface for Push Buttons The interface converts external push button contacts to a Nikobus telegram, with 2 inputs provided for external push buttons and one input for connection to the Nikobus. L

05-056 170-00000

Interface for Switches The interface converts one external switch contact with low control frequency to 2 Nikobus telegrams. One input is provided for 1 an external 3 switch and One input is used for connection to the Nikobus.

Nikobus

05-058

2

* xxx Denotes colour choice – please see p51.

Tip

The system can be placed centrally or decentrally. In case of central placement, all modules are placed in the same fuse box, with the Nikobus cable starting from the fusebox and going to all push buttons. Decentral placement of the modules is very useful in larger houses and bigger buildings. In this case, some of the modules are placed in a fuse box in, for example, the garage, whilst others are placed in a fuse box in, for example, the attic. With this placement, the cabling distance from consumer to module can be shortened considerably, saving both material and time. www.n i k o u k . c o m

17


Nikobus

Circuit Boards

Easy installation, easy application Niko’s Nikobus printed circuit boards are specifically designed to simply and effectively connect push buttons and switches seamlessly with the Nikobus system – for optimum control of your surroundings.

Simple Wall Mounted Printed Circuit Board The wall-mounted printed circuit board contains all the electrical & mechanical elements needed to connect a bus push button to the bus, and is mounted on a simple standard flush mounting box. The wall-mounted print is supplied with a 4-pole connector (2 for Nikobus, 2 for LED or IR push button power supply) as standard.

TO P

450-00021

450-00020 • 450-00021

Wall-Mounted Printed Circuit Boards for combination with connection unit The wall-mounted printed circuit board provides all electrical and mechanical elements that are required to connect the bus push button to the bus and send telegrams. A Nikobus wall-mounted printed circuit board is mounted on a simple standard flush mounting box for horizontal screw fixing. For mounting of multiple flush surround plates, no additional flush mounting boxes are required. From the flush mounting box, you can work to bottom, top, left, or right. This makes the Nikobus push buttons extendable without any drilling or channelling work.

Double horizontal wall-mounted printed circuit board

450-00023

Double vertical wall-mounted printed circuit board

450-00025

Triple horizontal wall-mounted printed circuit board

450-00026

Triple vertical wall-mounted printed circuit board

450-00028

Connection Unit for Wall Mounted Circuit Board Connects the bus with the wall-mounted printed circuit board and can be placed in multiple positions with multiple circuit boards.

450-00060

18

www.n ikouk.com


Nikobus

Transformers - easy to install - easy to use

www.n i k o u k . c o m

...your home your

19


Sensors

Sensors

Invisibly controlling your environment Providing both security and convenience, Niko’s assortment of sensors increase your safety whilst adding to the ease and comfort with which you can enjoy your home. From smoke alarms to motion sensors and everything in between, Niko’s range of automated sensors ensure that the house becomes everything you desire in a home.

Motion Detector PIR 180 (+ Actor) The motion detector features a horizontal detection range of 8m, and adjustable switch-off delay (between 5secs & 30mins), and adjustable light sensor (2-1,000lux), and is only suitable for indoor mounting.

xxx-78400* (+430-00500)

ko Wave horizontal

versions

Twilight Switch, 24V, 1-channel 4A Twilight Switch for outdoor wall mounting (IP54) suitable for switching outdoor lighting including adjustable light sensitivity (5-300lux) and a large sensor surface for outdoor measuring. Complies with European directives for EMC and safety EN60669-2-1.

350-10000

Electronic Clock Thermostat N

L

L

1

02135 420-0010x

This thermostat features day/week programming, 30 mins operation reserve (for adjusting the clock), 3 temperature levels (night/day/antifreeze) and a permanent time or temperature display.

(09-7x1)

230V~ 10A µ 50Hz

xxx-00500

20

* xxx Denotes colour choice – please see p51.

www.n ikouk.com


The wireless smoke alarm reacts early to smoke emission from both smouldering and open fires. The alarm features an integrated visual & acoustic alarm, and is linked to all other smoke alarms to generate a property-wide alarm. A relay module can also be used for additional connections. Complies with DIN EN14604; BS5446-1; ISO 12239. Quality marks: BOSEC. Smoke Detector with finishing plate

420-00000

Smoke Detector with Aluminium finishing plate

420-00001

Smoke Detector with finishing plate + Aux. Relay

420-00003

Smoke Detector with Aluminium finishing plate + Aux. Relay

420-00004

Sensors

Sensors Wireless Smoke Detector, 230V +9V Battery (+ Auxiliary Relay)

* xxx Denotes colour choice – please see p51.

Tip The system consists of 2 basic components: sensors and actors. The sensors are push buttons, motion detectors, Niko thermostats or external sensors such as window contacts, wind detectors etc. These external sensors can be connected to the bus via interfaces. The actors are intelligent switching & shutter modules and dim controllers of Niko. In fact, the Nikobus home automation system offers numerous advantages for both the installer and the end-user.

Save time, save energy, save space Every installation needs transformers and the new Niko range of low voltage transformers are compact, efficient and very quick to install. This new type of transformer has been planned with energy saving in mind and anticipates the removal of 230 volt halogen and incandescent (filament) lamps from the market. Tests have shown that a 12 volt spotlight connected to a Niko transformer will produce a brighter light yet consume less energy.

70Watt Transformer

105 Watt Transformer

Diameter of 38mm and IP65 standard damp proof protection.

320-00101 www.n i k o u k . c o m

150 Watt Transformer

105 Watt Transformer with IP65 standard damp proof protection.

320-00104

Transformers

Transformers

150 Watt Transformer with IP65 standard damp proof protection.

320-00105

21


Lighting

Lighting Controllers

Lighting Control Niko’s range of Universal Lighting Controls give you almost limitless creative possibilities when planning the different atmospheres you desire in your home, whilst also offering the practical benefits and ease of installation symbolic of all Niko products. For the example, the PLC filters prevent lamps from dimming during the switchover from day to night rate and overload & short-circuit protection also mean that, should anything go wrong, the dimmer units themselves go directly into safe mode – without breaking.

Universal Modular Dimmer 750VA (3A) Dimmer is suitable for incandescent lamps, 230V and all types of low voltage halogen lamps. The dimmer can control up to 30 push buttons and features a set of feedback LEDs, with additional memory for saving one atmosphere via push button control. Complies with European directives for EMC & safety EN60669-2-1. Also features overload protection with automatic reboot function and electronic short circuit protection.

• Ferromagnetic Transformer: 750VA • Toroidal Core Transformer: 750VA • Electronic Transformer: 750VA • Min. Load: 60W/60VA • Dimenssions (DIN 2): 90 x 35 x 66mm • PLC Filter for interference via the mains

05-715

ko Wave horizontal

versions

Universal Modular Dimmer 1400VA (6A) Dimmer is suitable for incandescent lamps, 230V and all types of low voltage halogen lamps. The dimmer can control up to 30 push buttons and features a set of feedback LEDs, with additional memory for saving one atmosphere via push button control and an integrated staircase function. Complies with European directives for EMC & safety EN606692-1. Also features overload protection with automatic reboot function and electronic short circuit protection.

• Ferromagnetic Transformer: 1400VA • Toroidal Core Transformer: 1400VA • Electronic Transformer: 1400VA • Min. Load: 100W/100VA • Dimensions (DIN 6): 89 x 105 x 60mm • PLC Filter for interference via the mains

65-410

Tip If you and your customer are discussing the electrical installation for a building or renovating project, also consider the following questions; Which light points have to be switched? Which light points have to be dimmed? Do the light points have to be controlled with one, or several, buttons? Which light points have to be switched via motion detectors? Which shutters have to be controlled manually? Are additional functionalities, such as all on/all off, panic key etc., required? And don’t forget the garden lighting and lighting along the driveway!

22

www.n ikouk.com


Lighting Controllers - easy to install - easy to program - easy to use

Ad

...your home your www.n i k o u k . c o m

23


Lighting

LED Strips

Efficient, economic - fill your life with light Thanks to Niko’s new plug-and-play connection system, installation is quick and simple. With a power consumption of just 2.5W, the LED Strips can be clicked into profile with no gluing or screwing required. Similarly the asymmetrical shape of the clip makes it impossible to interconnect different strips incorrectly, and also provides uniform lighting over the entire light line – regardless of angles or curves. Available as either a stand-alone, or in connection with Nikobus, the LED Strips are available in a whole range of colours to simultaneously save energy, add atmosphere, and provide orientation lighting to the modern home.

White LED Strip with Monochrome LEDs

ko Wave horizontal

versions

White LED strip with monochrome LEDs. Every LED strip can be subdivided in 4 usable parts of 10cm each with the LED strips glued at connector height to simplify mounting or possible demounting. The LED strips are designed for flush mounting into the Niko protective profile (340-00301). For connection around an angle or connection with the power supply, the Niko connectors with 340-00304 and 340-00305 must be used.

• Dimensions: L400mm x W14.5mm x D6.5mm • Protection degree: IP20 (in combination with ref. 340-00301) • Number of LEDs per strip (white, green and blue): 20 • Number of LEDs per strip (red and amber): 32 • Max. length with 1 power supply (white LEDs): 8m • Max. length with 1 power supply (colour LEDs): 6m • Supply voltage: 24V DC

LED strip cold white 6500K

340-00001

LED strip neutral white 4000K

340-00002

LED strip warm white 2800K

340-00003

LED strip blue

340-00004

LED strip green

340-00005

LED strip red

340-00006

LED strip amber

340-00007

Black LED Strip with Monochrome LEDs Black LED strip with monochrome LEDs. Every LED strip can be subdivided in 4 usable parts of 10cm each with the LED strips glued at connector height to simplify mounting or possible demounting. The LED strips are designed for flush mounting into the Niko protective profile (340-00301). For connection around an angle or connection with the power supply, the Niko connectors with 340-00304 and 340-00305 must be used.

24

• Dimensions: L400mm x W14.5mm x D6.5mm • Protection degree: IP20 (in combination with ref. 340-00301) • Number of LEDs per strip (white, green and blue): 20 • Number of LEDs per strip (red and amber): 32 • Max. length with 1 power supply (white LEDs): 8m • Max. length with 1 power supply (colour LEDs): 6m • Supply voltage: 24V DC

LED strip cold white 6500K

340-00008

LED strip neutral white 4000K

340-00009

LED strip warm white 2800K

340-00010

LED strip blue

340-00011

LED strip green

340-00012

LED strip red

340-00013

LED strip amber

340-00014 www.n ikouk.com


White LED Strip with RGB LEDs White LED strip with RGB LEDs. Every LED strip can be subdivided in 4 usable parts of 10cm each with the LED strips glued at connector height to simplify mounting or possible demounting. The LED strips are designed for flush mounting into the Niko protective profile (340-00301). For connection around an angle or connection with the power supply, the Niko connectors with 340-00304 and 340-00305 must be used.

• Dimensions: L400mm x W14.5mm x D6.5mm • Protection degree: IP20 (in combination with ref. 340-00301) • Number of LEDs per strip: 20 • Max. length with 1 power supply: 4m • Supply voltage: 24V DC

Lighting

LED Strips

340-00101

Black LED Strip with RGB LEDs Black LED strip with RGB LEDs. Every LED strip can be subdivided in 4 usable parts of 10cm each with the LED strips glued at connector height to simplify mounting or possible demounting. The LED strips are designed for flush mounting into the Niko protective profile (340-00301). For connection around an angle or connection with the power supply, the Niko connectors with 340-00304 and 340-00305 must be used.

• Dimensions: L400mm x W14.5mm x D6.5mm • Protection degree: IP20 (in combination with ref. 340-00301) • Number of LEDs per strip: 20 • Max. length with 1 power supply: 4m • Supply voltage: 24V DC

340-00102

Power Supplies DIN rail power supply for LED strips 24Vdc – 25W This 25W LED power supply is designed for DIN rail mounting, with 1 primary input and 4 secondary terminals for connecting 2 loads easily, whilst it also features screw terminals on both the primary and secondary side. The output power range is adjustable. The power supply complies with the European directives for EMC and safety (EN61347-2-13).

• DIN 4.5 modules W78mm x H93mm x D56mm • Weight: ±270g • Operating temperature: -20°C to +60°C ;Ta: 35°C • Protected against short-circuit, overvoltage and overload (self-resetting) • Input terminals (1 pair): 2x1.5mm2 or 1x2.5mm2 • Supply voltage: 100 ~ 240V~; frequency 50 ~ 60Hz • Output terminals (2 pairs): 2x1.5mm2 or 1x2.5mm2 • Adjustable output power range: 21.6V DC - 26.4V DC • Nominal current / power: 1.04A / 25W • Ripple: 150mVp-p • SELV

340-00021

DIN Rail Power Supply for LED Strips 24Vdc – 50W This 50W LED power supply is designed for DIN rail mounting, with 1 primary input and 4 secondary terminals for connecting 2 loads easily, whilst it also features screw terminals at both the primary and secondary side. The output power range is adjustable. The power supply complies with the European directives for EMC and safety (EN61347-2-13).

• DIN 4.5 modules W78mm x H93mm x D56mm • Weight: ±300g • Operating temperature: -20°C to +60°C ;Ta: 35°C • Protected against short-circuit, overvoltage and overload (self-resetting) • Input terminals (1 pair): 2x1.5mm2 or 1x2.5mm2 • Supply voltage: 100 ~ 240V~; frequency 50 ~ 60Hz • Output terminals (2 pairs): 2x1.5mm2 or 1x2.5mm2 • Adjustable output power range: 21.6V DC - 26.4V DC • Nominal current / power: 2.08A / 50W • Ripple: 150mVp-p • SELV

340-00022 www.n i k o u k . c o m

25


Sarratt Case Study

Converted

church now makes an aspirational

When high-end developers acquired a somewhat rundown and redundant church in a most desirable home-counties village, it was obvious to them that they could have a development that would be at the top end of the scale - if they got it right. Developing the ‘Wow’ factor Having experience of Niko from previous developments, it was obvious from the outset that introducing a Nikobus-based system into the scheme would help to deliver that all important ‘Wow’ factor which could ensure that the property achieves its potential.

ko Wave horizontal

versions

home

The first stage in the development was to gut the existing building - removing everything inside it and assessing the available space as a potential home. It was already clear that, situated in a large plot, it could be dramatically extended to provide sizeable family living accommodation. The building was carefully dismantled internally. Attention to detail included even preserving the stained glass windows and re-installing them as part of a much more energy efficient double-glazing system.

Giving a real sense of luxury The new part of the house was built in matching brick with a stunning glass facade overlooking the grounds. Lighting the house to maximum effect from inside and outside was part of the brief - and integrating access controls and audio distribution added to the sense of luxury that this house exudes. All rooms in the house have built-in speakers, video feed, data and programmable lighting linked to the central house automation system which regulates heating, lighting, video/audio and CCTV. CCTV cameras are all around the exterior of the property and linked to a hard drive recorder. The images produced are viewable throughout the house on television screens as well as being viewable remotely via the internet.

26

www.n ikouk.com


The lighting can be easily programmed using Nikobus to provide a wide range of light settings including Vacation, Party, Romantic, etc., and it can be set to run at 90%, which has no discernable impact on lighting levels, but greatly reduces energy consumption.

Safe and secure Electronic gates with intercom and camera ensures that security is maintained, without inconvenience to welcome visitors. All of the exterior of the building, and the garden has been fitted with lighting to create a stunning setting; all of which are controlled from within the house as part of the Nikobus system. A Philips Pronto remote control has been programmed to give easy and accessible control of all of the functions within the house.

Music where you want it, when you want it Distributed audio is available throughout the house using built-in speakers to provide music and programs from radio, iPod or CD, whilst the Plasma screen in the family room alongside the kitchen benefits from in-ceiling speakers that deliver sound discreetly and exactly where you want it. High definition TV has been distributed in all main rooms and stereo speakers are also fitted in these areas, along with data distribution. A surround sound system has been pre-wired in the main living room.

Fully integrated system A touchscreen has been positioned on the wall inside the front hallway to allow for easy control from a single source. This can be used to greet visitors using the intercom on the access control system at the gates, with their image appearing on the touchscreen - which also operates the gate opening system and the house lights and audio system.

www.n i k o u k . c o m

Controlling your environment The indoor environment can be controlled using the Nikobus heating control system. This typically divides a home into at least three heating zones: the living spaces, the bedrooms and the bathroom. In an average home, these zones are used at different times during the day and normally they should be heated differently. Ideally, however, the system controls the heating levels for each separate room individually. The advantage of such a setup is that the heating of a room can be switched off when the normal everyday routine no longer applies. Moreover, children and adults do not use their bedrooms in the same way, nor do they use them at the same times during the day: children go to bed much earlier, and often they use their rooms for play and study, too. Using the Nikobus thermostat, you can set different day and week programs. Three temperature modes are available: day temperature, night temperature and frost protection. Furthermore, the Nikobus actor has a connection point to force the thermostat in night mode, which overrules the program. You can introduce a SMS messaging feature into the system to enable you to control your home remotely using your mobile ‘phone.

Sarratt Case Study

Programmed light settings for mood and economy

Niko adds the final gloss The redeveloped church now features two areas - the original church with a new-build added onto the back which is seamlessly integrated to provide extensive accommodation including a light and airy open plan living area, impressive entertainment areas, four bedrooms and three bathrooms. Using Niko to put the final gloss on this pearl has helped to turn this redundant church into a dream home.

27


Lighting

Power Supplies DIN Rail Power Supply for LED Strips 24Vdc – 100W This 100W LED power supply is designed for DIN rail mounting, with 1 primary input and 4 secondary terminals for connecting 2 charges easily, whilst it also features screw terminals at both the primary and secondary side. The output power range is adjustable. The power supply complies with the European directives for EMC and safety (EN61347-2-13).

• DIN 6 modules W100mm x H93mm x D56mm • Weight: ±350g • Operating temperature: -20°C to +60°C; Ta: 35°C • Protected against short-circuit, overvoltage and overload (self-resetting) • Input terminals (1 pair): 2x1.5mm2 or 1x2.5mm2 • Supply voltage: 100 ~ 240V~; frequency 50 ~ 60Hz • Output terminals (2 pairs): 2x1.5mm2 or 1x2.5mm2 • Adjustable output power range: 21.6V DC - 26.4V DC • Nominal current / power: 4.2A / 100W • Ripple: 150mVp-p • SELV

340-00023

Power Supply for LED Strips 24Vdc – 25W This 25W LED ensures strain relief thanks to Niko’s new click system. There are 2 primary inputs for easy interconnecting (max 8x) and 2 secondary outputs for connecting 2 charges easily, whilst it also features screw terminals at both the primary and secondary side. The power supply complies with the European directives for EMC and safety (EN61347-2-13).

• Dimensions: H116mm x W52mm x D32mm • Weight: ±120g • LED strips: max. 10x monochrome, 5x RGB • 4-fold primary terminal connection: 1x2.5mm2 or 2x1.5mm2 with screw terminal • Supply voltage: 230V- 50Hz • 4-fold secondary terminal connection: 1x2.5mm2 or 2x1.5mm2 with screw terminal • Output voltage: 24Vdc 100mm • Protection degree: IP20 • SELV

340-00015

ko Wave horizontal

versions

Power Supply for LED Strips 24Vdc – 25W (IP65) This 25W LED Strip power supply has a protection degree IP65, and is both dustproof and splashproof - making it especially suitable for installation in a bathroom or kitchen. The cables are fixed using resin, with a rubber wire on the primary side, and a silicon wire on the secondary side –which allows a direct connection to the LEDs. The power supply complies with the European directives for EMC and safety (EN61347-2-13).

• Dimensions: H75mm x W52mm x D32mm • Weight: ±220g • LED strips: max. 10x monochrome, 5x RGB • Primary connection: rubber cable 2x1mm2; length 50cm • Supply voltage: 230V- 50Hz • Secondary connection: silicone wire 2x0.75mm2; length 30cm • Output voltage: 24Vdc • Protection degree: IP65 • SELV

340-00018

Accessories LED Connector (Connection Around Angles or in Curves)

This connector is for mounting LED strips around an angle or mounting around a curve in intervals. The length of the cables between the connectors is 14cm. 340-00304

28

www.n ikouk.com


Nikobus LED control (max. 100W) The LED control can be used for controlling both monochrome and Niko RGB LED strips and can be connected directly to the Nikobus. Featuring 15 application modes (such as dimming on/ off, changing colour, setting brightness, etc.) and 9 for monochrome LED strips (such as dimming on/off, delayed off etc.) it is possible to manually program a 4-key control for RGB colour and brightness using the factory settings. Nikobus software is needed for other settings and also allows several orientation lights to be arranged in a master/slave configuration for reacting synchronously to one and the same command – with a maximum of 4 masters per installation and 8 slaves per master.

• Bus connection: 9V DC (SELV, safety extra-low voltage) • Supply voltage: 24V DC • 4-fold primary terminal connection max. 2x1.5mm2 or 1x2.5mm2 • 5-fold secondary terminal connection max. 2x1.5mm2 or 1x2.5mm2 • There are 3 PWM outputs and 1 common connection, which makes it possible to spread the monochrome LED strips over 3 outputs or to use 1 output for the RGB LED strips. • Dimensions: H116mm x W52mm x D32mm • IP20 • CE compliant

Lighting

RGB LED Control

340-00112

Nikobus Orientation Lighting with RGB LEDs Orientation lighting with RGB LEDs can be connected directly to the Nikobus. Featuring 15 application modes (such as dimming on/off, changing colour, setting brightness, etc.) it is possible to manually program a 4-key control for RGB colour and brightness using the factory settings. Nikobus software is needed for other settings and also allows several orientation lights to be arranged in a master/slave configuration for reacting synchronously to one and the same command – with a maximum of 4 masters per installation and 8 slaves per master. This product can be provided with an emergency battery (ref. 170-38020 - NiMH, to be ordered separately). In case of a power cut, the integrated emergency battery takes over the power supply for 15min. 340-00111

With plug-in terminals and screw fixing

340-00113

• Only suitable for a flush mounting box with a min. flush mounting depth of 50mm • LEDs working at 12 - 24V DC, external power supply • Bus connection 9V DC (SELV, safety extra-low voltage) • Can be connected directly to the Nikobus • No heat, IR or UV radiation • Terminals with a connection range of min. 2x0.5mm2 and max. 2x1.5mm2 • IP41, IK06 • CE compliant • Ambient temperature: -5 to + 55°C With plug-in terminals and claw fixing

Accessories LED Connector for Connection to a Power Supply (board-to-wire) Connector which connects LED strips to a power supply. The connector can be mounted on any contact point on the LED strip, providing a continuous light line without creating a difference in centre distance between the LEDs, even where a connection to the power supply is made. The length of the cables is 150cm. 340-00305

Protective profile 2m, including screws and tape

Transparent protective profile made of environmentally friendly polycarbonate, suitable • Dimensions: L2000mm x W19mm x H12.5mm for both monochrome and RGB LEDs, which has to be cut at the desired length. A • Weight: ±150g number of screw holes are provided to facilitate installation with the profile able to be • Screw type: countersunk screw-fixed by means of the supplied screws or glued by means of the supplied tape. chipboard crosshead screws PZ1; 3 x 12mm The LED strip itself can be slid into the profile from the side or clicked into the profile from the top.

340-00301 www.n i k o u k . c o m

29


Access Control - easy to install - easy to program - easy to use

Ad

ko Wave horizontal

30

versions

...your home your www.n ikouk.com


Media

Media Network

Access to a World of Possibilities Socket outlets that provide electricity to every room in a house have been with us for years. Now with Niko’s new range of outlets, Data Communication can be made just as accessible in the same way. Outlets mount quickly and easily thanks to the click connection, are available in all Niko finishes, and are suitable for flush mounting in a bridge, trunking system, mini-patch distributor or surface mounting box.

1x RJ45 UTP cat.5E Flat set

Includes 4.1 adaptor and 1 outlet. Requires Base Unit 170-75145 or 170-75245. Finishing set with non-transparent text field

xxx-65100*

Finishing set with transparent text field

xxx-65500*

2x RJ45 UTP cat.5E, Flat set Includes 4.2 adaptor and 2 outlets. Requires Base Unit 170-75125 or 170-75225. Finishing set with non-transparent text field

xxx-65200*

Finishing set with transparent text field

xxx-65600*

1x RJ45 FTP cat.5E, Flat set Includes 4.1 adaptor and 1 outlet. Requires Base Unit 170-75146 or 170-75246. Finishing set with non-transparent text field

xxx-65100*

Finishing set with transparent text field

xxx-65500*

2x RJ45 FTP cat.5E, Flat set Includes 4.2 adaptor and 2 outlets. Requires Base Unit 170-75126 or 170-75226. Finishing set with non-transparent text field

xxx-65200*

Finishing set with transparent text field

xxx-65600*

1x RJ45 UTP cat.6, Flat set Includes 4.1 adaptor and 1 outlet. Requires Base Unit 170-75148 or 170-75248. Finishing set with non-transparent text field

xxx-65100*

Finishing set with transparent text field

xxx-65500*

* xxx Denotes colour choice – please see p51.

www.n i k o u k . c o m

31


Media

Media Network 1x RJ45 UTP cat.6, Oblique set

Includes 4.4 adaptor and 1 outlet. Flush mounting depth when using the cover cap on the connectors: 37.5mm. Flush mounting depth without the cover cap on the connectors: 30mm. Requires Base Unit 170-75348.

Finishing set with transparent text field

xxx-65400*

2x RJ45 UTP cat.6, Flat set Includes 4.2 adaptor and 2 outlets. Requires Base Unit 170-75128 or 170-75228.

Finishing set with non-transparent text field

xxx-65200*

Finishing set with transparent text field

xxx-65600*

2x RJ45 UTP cat.6, Oblique set

Includes 4.4 adaptor and 2 outlets. Flush mounting depth when using the cover cap on the connectors: 37.5mm. Flush mounting depth without the cover cap on the connectors: 30mm. Requires Base Unit 170-75328.

Finishing set with transparent text field

xxx-65400*

1x RJ45 STP cat.6, Flat set Includes 4.1 adaptor and 1 outlet. Requires Base Unit 170-75147 or 170-75247.

Finishing set with non-transparent text field

ko Wave horizontal

versions

xxx-65100*

Finishing set with transparent text field

xxx-65500*

1x RJ45 STP cat.6, Oblique set

Includes 4.4 adaptor and 1 outlet. Flush mounting depth when using the cover cap on the connectors: 37.5mm. Flush mounting depth without the cover cap on the connectors: 30mm. Requires Base Unit 170-75347.

Finishing set with transparent text field

xxx-65400*

1x RJ11 UTP, Flat set

Includes 4.1 adaptor and 1 outlet. Requires Base Unit 170-75111 or 170-75211.

Finishing set with non-transparent text field

xxx-65100*

Finishing set with transparent text field

xxx-65500*

2x RJ11 UTP, Flat set

Includes 4.2 adaptor and 2 outlets. Requires Base Unit 170-75121 or 170-75221.

Finishing set with non-transparent text field

xxx-65200*

Finishing set with transparent text field

xxx-65600*

Flush Mounting Frame for Flat set + Oblique set with Niko outlets Requires Base Unit 170-68800 or 170-68900

32

* xxx Denotes colour choice – please see p51.

www.n ikouk.com


Media

Audio Distribution

Music where you are when you want it The true beauty of Home Automation is to effortlessly create the correct ambiance for any situation at the push of a button, and what adds more to the mood of a room or event than music? Niko’s Allegretto Audio Distribution system takes any source music you choose and sends it to whichever part of the home you require via the Nikobus, and with a whole host of control options to suit your needs including Infrared Remote Controls, Wired Push Buttons, Handheld Remote Transmitters, and Wireless Switches.

Audio Link The Audio-Link connects the Allegretto A44 and A88 audio distribution • Characteristics: LCD screen for programming systems to all Nikobus control buttons. & status display 2 Nikobus inputs 230V Connection

05-205

A44 Home

Audio Distribution System for the distribution of 4 different audio sources to 4 different zones, which features built-in stereo amplifiers for the connection of 4 or 8ohm loudspeakers, microphone connection, lit standby key, blue zone LEDs, and 6mm thick brushed aluminium front. The A44 is controlled with Nikobus push buttons via the Audio Link (05-205)

16-700

A88 Home

Audio Distribution System for the distribution of 8 different audio sources to 8 different zones, which features built-in stereo amplifiers for the connection of 4 or 8ohm loudspeakers, microphone connection, lit standby key, blue zone LEDs, and 6mm thick brushed aluminium front. The A44 is controlled with Nikobus push buttons via the Audio Link (05-205)

16-701

A44 19”

Audio Distribution System for the distribution of 4 different audio sources to 4 different zones, which features built-in stereo amplifiers for the connection of 4 or 8ohm loudspeakers, microphone connection, and is finished with a front for mounting in a 19” rack. The A44 is controlled with Nikobus push buttons via the Audio Link (05-205)

16-702

A88 19”

Audio Distribution System for the distribution of 8 different audio sources to 8 different zones, which features built-in stereo amplifiers for the connection of 4 or 8ohm loudspeakers (for the first 4 zones), microphone connection, and4 built-in infrared outputs. The A44 is controlled with Nikobus push buttons via the Audio Link (05-205)

16-703 www.n i k o u k . c o m

33


Niko Mysterious

Mysterious

The invisible switch from Niko The antidote to wall switches, Niko’s awarding winning latest innovation is a totally invisible wall switch to control your lighting. A simple round push-button that is embedded into the wall, Mysterious is so robust and flexible that it can be covered in the same material as the rest of the wall to seamlessly blend in.

Flush Mounting System for Brickwork A flush mounting system for brickwork including a blue insulation box with 2 inputs M20/M16, 2 cardboard plaster moulds, 1 fixing ring, 1 50mm flush mounting box, and 2 protective cardboards for finishing. 199-00096

Flush Mounting System for Drywall Panels A flush mounting system for drywall panels including 1 fixing ring, 1 50mm flush mounting box, and 2 protective cardboards for finishing. The fixing ring must be fixed with a 2 component chemical anchor (polyester), and the Hole Saw (199-00099) should be used for installation.

199-00097

Hole Saw for Drywall Panels Hole Saw with a double saw blade for flush mounting systems in drywall panels. The first saw blade has a diameter of 80mm, the second saw blade has a diameter of 89mm and makes a 5mm deep collar. 199-00099

ko Wave horizontal

versions

Push Button 24V Always to be used in conjunction with a flush mounting system for either brickwork or drywall panels, and is supplied with 3 finishing plates (single, double, and quadruple finishing plates), 3 overvoltage bridges and 2 protective cardboards for finishing.

199-00199

2x Single Coax + Satellite Supplied with 2 protective cardboards for finishing and must always be used in combination with the flush mounting system for either brickwork or drywall. 199-69550

2x RJ Connection for Niko Outlets Supplied with 2 protective cardboards for finishing and must always be used in combination with the flush mounting system for either brickwork or drywall. Niko outlets must be ordered separately. 199-65200

Blank Plate Supplied with 2 protective cardboards for finishing and must always be used in combination with the flush mounting system for either brickwork or drywall. 199-76900

34

www.n ikouk.com


The Brief To provide an on-wall switch control that does not detract from the decor of a room. The implementation The antedote to wall switches, Niko’s latest innovation is a totally invisible wall switch to control your lighting. Using Niko Mysterious switches, the wall is left to look as if it is completely free of any switches, except in the dark, when there is a subtle glow surrounding the embedded switch to guide users towards it. A simple round push-button that is embedded into the wall, Mysterious is so robust and flexible that it can be covered in the same material as the rest of the wall to seamlessly blend in. Whether your choice of wallcovering is wallpaper, paint, or even panelling, the Mysterious switch from Niko can be covered to blend in completely. Operation is simplicity itself - a simple push switches it on, with dual-action switches controlled with the simple option of pushing the top half, or the bottom half for different instructions.

Niko Mysterious

Mysterious - Case Study

Additional Mysterious options For hallways and stairs, there is a matching orientation lighting system using blue or white LEDs to guide your way without the need for more conventional lighting. Activated by a switch, or motion sensor, Mysterious offers a complete solution to providing the ultimate discreet control of lighting scenes. Media connectivity is also solved with similarly flushmounted sockets to provide co-axial, satellite and datacom connections. The uiltimate minimalist solution, blending in with traditional and modern interiors; Mysterious is a solution that will be loved as much by aesthetes as by technocrats. Mysterious - the ultimate solution for subtle good taste in every living environment.

www.n i k o u k . c o m

35


ko Wave horizontal

Niko Mysterious - easy to install - easy to program - easy to use - easy to hide

versions

...your your home your 36


Switching unit 05-000-02

LED-indications: (A) 13 for 12 outputs (including 1 changeover contact) (B) 2 for the power supply of the outputs (C) 8 for mode indication (D) 1 for Nikobus supply (E) 1 for active power supply of the switching unit (F) 2 for external 230V logic inputs (G) Programming button: to be triggered by screwdriver (H) Output selection key: to select outputs 1 to 12 (I) Mode selection key: to select modes 1 to 15

(J) Timeswitch: to set time (K) Non-volatile EEPROM memory (L) Bus connection (M) Status LED connection (N) External 230V inputs with logic functions (O) SET selection key: to select external inputs A and/or B Audio signal: short signals: program mode Long signal: sensor recognition Double short signal: erase

Wiring Diagrams

Wiring Diagrams Nikobus

MODE Function Description Necessary keys on the BUS push-buttons If the “mode” button is pressed less than 1.6 sec during programming, modes m1 to m8 are recalled. The “mode” LEDs light continuously M1: .............on/off ...................................................................top: on, bottom: off ...............................................................................................................................2 M2: .............on (if necessary with operating time) ...................always on (centralised functions) ..........................................................................................................1 M3: .............off (if necessary with operating time) ...................always on (centralised functions) ..........................................................................................................1 M4: .............push-button .........................................................on for as long as the rocker is pressed (e.g. bell push-button, dimming connection) max. 8 sec .............1 M5: .............toggle (flip-flop) ..................................................ON and OFF with the same rocker side ...................................................................................................1 M6: .............delayed off (longer times to 2h)............................press: after time-delay: OFF (e.g. stair timer) ........................................................................................1 M7: .............delayed on (longer times to 2h) ............................press: after time-delay: ON (e.g. operating delay) .................................................................................1 M8: .............blinking/flashing ..................................................press: ON/OFF/ON (turn off with M3) ...................................................................................................1 If the “mode” button is pressed longer than 1.6 sec during programming, modes m11 to m15 are recalled. The “mode” LEDs are flashing M11:............delayed off (shorter times to 50 secs) ...................as m6 but shorter time ..........................................................................................................................1 M12: ...........delayed on (shorter times to 50 secs) ...................as m7 but shorter time ..........................................................................................................................1 M13: ...........sequencer on/off ...................................................switching several outputs in sequences using a time cycle ......................................................................2 ................................................................................................The final switching order is determined during programming M14: ...........light scene on .......................................................press short: recalling a certain light scene .............................................................................................1 ................................................................................................press long: stores the modified light scene in the memory (>3 sec) M15: ...........light scene on/off ..................................................press short: recalling a certain light scene .............................................................................................2 ................................................................................................Press long top rocker: stores the modified light scene in the memory (>3 sec) ................................................................................................Bottom button > off At present no function has been assigned to m16, m17 or m18

TIME SELECTION Time selection modes m11 and m12 (short times):

Time selection modes m6, m7 and m13: 0 1 2 3 4 5 6 7

= = = = = = = =

10s 1min 2min 3min 4min 5min 6min 7min

8 9 A B C D E F

www.n i k o u k . c o m

= = = = = = = =

8min 9min 15min 30min 45min 60min 90min 120min

0 1 2 3 4 5 6 7

= = = = = = = =

0.5s 1s 2s 3s 4s 5s 6s 7s

8 9 A B C D E F

= = = = = = = =

8s 9s 15s 20s 25s 30s 40s 50s

Operating time selection modes m2 and m3: 0 1 2 3 4….F

= = = = =

0s 1s 2s 3s 0s

37


Wiring Diagrams

Wiring Diagrams Nikobus 05-001-02 Shutter unit

LED – indications: (A) 6 x 2 for outputs (B) 2 for power supply outputs (C) 8 for modes (D) 1 for Nikobus (E) 1 for active supply of the shutter unit (F) 2 for external 230V inputs (G) A “programming” key: to be triggered by screwdriver (H) An “output”-selection button: to choose outputs 1 to 6 (I) A “mode”-selection button: to choose modes 1 to 7

(J) Code-wheel switch: to set time delay (K) Non-volatile EEPROM – memory (L) Bus connection (M) External 230V inputs connector (N) SET-key: to select one of the external inputs and logical functions Audio signal: short signals: program mode long signals: sensor recognition double short signal: erase

MODE

ko Wave

Function Description Necessary keys on the BUS-push-buttons m1: ............opening ................................................................upper side rocker + T2.........................................................................................................................2 stop upper or lower side of the rocker + T2 closing lower side of the rocker + T2 m2 ..............opening ................................................................always opening + T2 ............................................................................................................................1 m3 ..............closing..................................................................always closing + T2 .............................................................................................................................1 m4l..............stop ......................................................................always stop............................................................................................................................................1 versions horizonta m5..............RF-controlled........................................................left upper-side: opening + T2 ...............................................................................................................4 left lower side: closing right upper side: stop right lower side: stop m6..............opening with operating time .................................always opening + T2 + T3..................................................................................................................1 m7 ..............closing with operating time ..................................always closing + T2 + T3 ...................................................................................................................1 m8 has no function and cannot be selected

TIME SELECTION - The timeout-function can be assigned to all modes. By setting the time, the run-time of the shutter motor can be adjusted. 16 settings ranging from 0 to 90 s., with or without manual operating time adjustment are selectable. Time adjustment for modes m1 to m5 (motor timeout function T2) 0 = switched off 1 = 0.4s. (pulse control) 2 = 6s. 3 = 8s. 4 = 10s. 5 = 12s. 6 = 14s. 7 = 16s. 8 = 18s. 9 = 20s. A = 25s. B = 30s. C = 40s. D = 50s. E = 60s. F = 90s.

38

Rotary switch 0 1 2 3 4 5 6 7 8 9 A B C D E F

- Reversing time delay fixed to: T1 = 0.5 sec. Purpose: electrical and mechanical protection against sudden motor reversals. - Programmable timeout functions after starting: T2 - Programmable manual operating time: T3 Time adjustment for modes m6 to m7 (combination of manual operating time and motor timeout function) Timeout function setting (T2) Manual operating time (T3) 1s. 1s. 2s. 3s. 8s. 1s. 8s. 2s. 8s. 3s. 16s. 1s. 16s. 2s. 16s. 3s. 30s. 1s. 30s. 2s. 30s. 3s. 90s. 1s. 90s. 2s. 90s. 3s. www.n ikouk.com


05-007-02 Dimcontroller

LED – indications: (A) 12 for outputs (B) 2 for logic inputs (C) 8 for modes (D) 1 for Nikobus (E) 1 for power supply of the dim contoller (F) Programming key: set by using a Screwdriver (G) Output selection key: to choose 1 of the 12 outputs (H) Mode selection key: to choose 1 of the 8 modes

(I) (J) Time switched T1 & T2: to set the time (K) Non volatile EEPROM memory (L) Bus connection (M) External 230V inputs (N) SET selection key: to choose 1 of the 2 external inputs Audio signal: short signals: program mode long signal: contact address recognition double short signal: erase

Wiring Diagrams

Wiring Diagrams Nikobus

MODE Function Description Number of control buttons m1: ...dim on/off ........... upper short: dim on to last value ..............................................2 ..................................... upper long: dim-up to maximum value ..................................... lower short: dim off ..................................... lower long: dim-down to minimum value m2 ....dim on/off ........... upper left: dim on to last value .................................................4 ..................................... lower left: dim off ..................................... upper right, short: dim on to last value ..................................... upper right, long: dim-up to maximum value ..................................... lower right, short: dim off ..................................... lower right, long: dim-down to minimum value m3: .setting on/off ....... upper left short, call setting ......................................................4 ..................................... lower left long: write setting ..................................... lower left: dim off ..................................... upper right: dim on to last value if not off ..................................... lower right: dim-down to minimum value of not off

Function Description Number of control buttons m4:...setting on ............ short: call setting, long: write setting ........................................1 m5:...on ........................ dim on to last value, with variable speed ..................................1 m6: ..off ....................... dim off, with variable speed ......................................................1 m7:...delayed off ........... dim on to last value ..................................................................1 ..................................... dim-down to minimum value after certain time m8:...flash .................... on/off/on, … with dimming speed 0 ........................................1 ..................................... switch off with m6 Modes m11 and m12 are called up by pressing the “mode” key for longer than1,6sec. During programming the LEDs are flashing m11: preset on/off ....... upper left: call up preset ...........................................................4 ..................................... lower left: dim off ..................................... upper right: dim on to last value if not off ..................................... lower right: dim-down to minimum value if not off m12 ..preset on ............. call up preset ............................................................................1

DEFINITIONS Dmax: Dmin: Dstart:

the maximum voltage at which no further visual change occurs. the maximum output voltage for a manual on-dim function. the minimum regulating voltage for a manual off-dim function the start / stop voltage when dimming on or off the voltage at which the lamp begins to glow

Example: These parameters can be set Individually for each output Dstart: between 0-2v in 16 steps (default value = 1.6V) Dmin: between 1-4V in 16 steps (default value = 1,6V) Dmax: between 6-10V in 16 steps (default value = 10V)

DIMMING SPEED Dimming Speed: Rotary switch T1 0 1 2 3 4 5 6 7 www.n i k o u k . c o m

‘dimming time’ OFF ->Max: (default values) 1s. 2s. 4s. 6s. 8s. 10s. 15s. 20s.

Dimming Speed rotary switch T1 8 9 A B C D E F

‘dimming time’ OFF ->Max.: (default values) 30s. 40s. 50s. 1min. 2min. 3min. 4min. 5min.

39


Wiring Diagrams

Wiring Diagrams Nikobus 05-002-02 Compact switching unit LED-indications: (A) 4 for outputs (B) 1 for Nikobus (C) 1 for power supply of the dim controller (D) Programming key: set by using a screwdriver (E) Output selection key: to choose 1 of the 4 outputs (F) Mode selection key: to choose 1 of the 14 modes (G) (H) Time switches T1 & T2: to set the time (H) Bus connection (I) Display: display of set mode Audio signal: short signals: program mode long signal: recognising sensor double shoot signal: delete

MODE Function Description Necessary keys on the control buttons If the “mode”-button is pressed less than 1,6s. during programming, modes m1 to m8 are recalled. The programming modes flash on the 7 segment display. m1: ............on/off ...................................................................top: ON, bottom: OFF.............................................................................................................................2 m2:.............on (if necessary with operating time) ..................always ON (centralised functions) .........................................................................................................1 m3:.............off (if necessary with operating time) ...................always OFF (centralised functions) ........................................................................................................1 m4:.............push-button .........................................................ON for as long as the rocker is pressed (e.g. bell push-button, dimming connection) max 8s. ................1 m5:.............toggle (flip-flop) ..................................................ON and OFF with the same rocker side ...................................................................................................1 m6:.............delayed OFF (longer times, till 2h.).......................press: after time delay: OFF (e.g. stair timer).........................................................................................1 m7:.............delayed ON (longer times, till 2h.)........................press: after time delay: ON (e.g. operating delay) ..................................................................................1 m8:.............blinking/flashing ..................................................press: ON/OFF/ON/…,(turn off with M3)..............................................................................................1 If the “mode”-button is pressed longer than 1,6s. during programming, modes m11 to m15 are recalled. The programming modes flash on the 7 segment display.

versionsoff (shorter times, till 50s.) .....................as m6, but shorter times ........................................................................................................................1 m11:l ...........delayed ko Wave horizonta

m12: ...........delayed on (shorter times, till 50s.) ......................as m7, but shorter times ........................................................................................................................1 m13: ...........sequencer on/off ...................................................switching of several outputs in sequencies via a time cycle .....................................................................2 ................................................................................................The final switching order is determined during programming m14: ...........light scene on .......................................................press short: recalling a certain light scene .............................................................................................1 ................................................................................................press long: stores the modified light scene in the memory(>3s.) m15: ..........light scene on/off ..................................................press short top rocker: recalls a certain light scene ................................................................................2 ................................................................................................press long top rocker: stores the modified light in the memory ................................................................................................(>3s.) bottom button->off ................................................................................................bottom button ->off For the time being no function has been assigned to M16, 17, 18.

TIME SELECTION Time selection modes m6, m7 and m13: Time selection modes m11 and m12 (short times): 0 = 10s. 0 = 0.5s. 1 = 1min 1 = 1s. 2 = 2min. 2 = 2s. 3 = 3min. 3 = 3s. 4 = 4min. 4 = 4s. 5 = 5min. 5 = 5s. 6 = 6min. 6 = 6s. 7 = 7min. 7 = 7s. 8 = 8min. 8 = 8s. 9 = 9min. 9 = 9s. A = 15min. A = 15s. B = 30min. B = 20s. C = 45min. C = 25s. D = 60min. D = 30s. E = 90min. E = 40s. F = 120min. F = 50s.

40

Operating time selection Modes m2 and m3: 0 = 0s. 1 = 1s. 2 = 2s. 3 = 3s. 4…F = 0s.

www.n ikouk.com


05-008-02 Compact dim controller LED – indications: (A) 4 for outputs (B) 1 for Nikobus (C) 1 for power supply of the dim controller (D) Programming key: set by using a screwdriver (E) Output selection key: key to choose 1 of the 4 outputs (F) Mode selection key: to choo9se 1 of the 14 modes (G) (H) Time switches T1 & T2: to set the time (I) Bus connection (J) Display: display of set mode Audio signal: short signals: program mode long signal: recognising sensor double short signal: delete

Wiring Diagrams

Wiring Diagrams Nikobus

MODE Function Description Number of control buttons m1: ...... dim on/off ........... upper short: dim on to last value .........................................2 ........................................ upper long: dim up to maximum value ........................................ lower short: dim off ........................................ lower long: dim down to minimum value m2:...... dim on/off ........... upper left: dim on to last value ............................................4 ........................................ lower left: dim off ........................................ upper right, short: dim on to last value ........................................ upper right, long: dim up to maximum value ........................................ lower right, short: dim off ........................................ lower right, long: dim down to minimum value m3:...... setting on/off ...... upper left short: call setting .................................................4 ........................................ lower left long: write setting ........................................ lower left: dim off ........................................ upper right: dim up ........................................ lower right: dim down m4: ..... setting on ............ short: call setting, long, write setting ...................................1 m5:...... on ....................... dim on to last value, with variable speed .............................1

Function Description Number of control buttons m6:...... off ....................... dim off, with variable speed .................................................1 m7:...... delayed off .......... dim on to last value .............................................................1 m8:...... flash.................... on/off/on, … with dimming speed 0 ...................................1 ........................................ switch off with m6 Modes m11, m12, m13 and m14 are called up by pressing the “mode” key for longer than 1.6s.during programming. The programming modes flash on the 7 segment display. m11: .... preset on/off ....... upper left: call up preset ......................................................4 ........................................ lower left: dim off ........................................ upper right: dim up ........................................ lower right: dim down m12: .... preset on ............. call up preset .......................................................................1 m13: .... dim on/off ........... 1 button mode......................................................................1 ........................................ short: switching between off and max. value ........................................ long: dim up/down m14: ... dim on/off ........... with memory .......................................................................1 ........................................ short: switching between off and latest value ........................................ long: dim up/down

DEFINITIONS Dmax: Dmin: Dstart:

the maximum voltage at which no further visual change occurs. the maximum output voltage for a manual “on”-dim function. the minimum regulating voltage for a manual “off”-dim function. the start / stop voltage when dimming on or off the voltage at which the lamp begins to glow.

Example These parameters can be set individually for each output. Dstart: between 0.2V in 16 steps (default value = 1.6V) Dmin: between 1-4V in 16 steps (default value = 1.6V) Dmax: between 6-10V in 16 steps (default value = 10V)

DIMMING SPEED Dimming Speed: Rotary switch T1 0 1 2 3 4 5 6 7

www.n i k o u k . c o m

‘dimming time’ OFF ->Max: (default values) 1s. 2s. 4s. 6s. 8s. 10s. 15s. 20s.

Dimming Speed rotary switch T1 8 9 A B C D E F

‘dimming time’ OFF ->Max.: (default values) 30s. 40s. 50s. 1min. 2min. 3min. 4min. 5min.

41


Wiring Diagrams

Wiring Diagrams Nikobus Programming procedure

Diagnostic functions

Diagnostic functions compact modules

m1 m2 m3 m4

- horizontal segment middle flashes: Nikobus- telegram - A flashes: short circuit, polarisation error - B flashes, bus power supply error - C flashes, memory error

Nikobus-telegram OK, flashing = wrong data-telegram bus short circuit, bus polarisation error bus supply circuit malfunctioning memory error

Programming external 230V inputs (not for compact modules) 1. “Switch-input function”

ko Wave

- press the ‘program’-button - select the output(s), the corresponding modes and optional times - select the input A or B with the ‘set’-button ns rsio veare horizonta - lthere 3 possibilities: LED A ON LED A OFF LED A ON

LED B OFF LED B ON LED B ON

output reacts on changes of A output reacts on changes of B output reacts on changes of A and B

- press the ‘set’-button longer (until a beep-tone is heard) - leave the “program”-mode 2. “Enable input function” - press the ‘program’ – button - select the output(s) and the corresponding modes - select the input A or B with the ‘set’-button as well as the logic function. There are 6 possibilities: Status of the LED During programming LED A LED B

pushbutton

action

OFF ON pinkt OFF OFF ON pinkt

on on on on on on on

push-button telegram will be passed through without influence of the external inputs push-button telegram will be passed through if A is on 230V push-button telegram will be passed through if A is on 0V push-button telegram will be passed through if B is on 230V push-button telegram will be passed through if B is on 0V push-button telegram will be passed through if A and B are on 230V push-button telegram will be passed through if A and B are on 0V

OFF ON OFF ON pinkt ON pinkt

- press the push-button - leave the “program” – mode

42

www.n ikouk.com


Wiring Diagrams

Wiring Diagrams Nikobus Connection Audio Link 05-205

L N 230V~

L

B1 B2

N

05-205

230V~50Hz

A44 / A88 COM 1

L

B

B

DCF

COM

2

DCF 05-200

230V~50Hz

COM

COM

1

B1 B2

N

+

3

4

5

6

C

05-000-02 05-001-02 05-008-02 05-002-02 05-007-02

10A

L 230V~ N

Allegretto install 01

L N 230V~

www.n i k o u k . c o m

43


Wiring Diagrams

Wiring Diagrams Nikobus Allegretto 2

Allegretto 3

ko Wave horizontal

versions

L N 230V~

44

www.n ikouk.com


Allegretto 4

Wiring Diagrams

Wiring Diagrams Nikobus

Allegretto 5

www.n i k o u k . c o m

45


Wiring Diagrams

Wiring Diagrams Nikobus Connection telephone interface 1-channel 05-190 12V S1

Telephone line out

M2 M1

Telephone line in

N L 230V~

Telephone line out Telephone line in BUS PUSH BUTTONS AND INTERFACES

ko Wave horizontal

versions

RF IR

do not connect N L 230V~

5

6

6

7 N

8

9

10

11

12

A B N 10 11 12 0V feedback led

set

N

L4

L5

L6

10A 230V~ 50Hz

do not connect

46

N

L

10A 230V~ 50Hz

program

m6 m7

L

F01

m1 m2 m3 m4 m5 N

mode

2345

select

B1 B2 bus T1

11 12 13 14 15

230V~

18

4

ABCE

3

05-000-02

230V~ 50Hz

10A

m8

2

6789

1 N

L 230V~ N www.n ikouk.com


Connection Compact Dim Controller 05-008-02 LOW VOLTAGE HALOGEN LS-HALOGEENLAMPEN

FLOURESCENT LAMPS BUS-PUSH BUTTONS FLUORESCENTIELAMPEN BUSDRUKKNOPPEN and INTERFACES en INTERFACES

L3 L1 N

L N 230V~

www.n i k o u k . c o m

0V

N

L2

L

EREATRONIC

HF BALLAST

LAMPS

IR

1 - 10V DC

INCANDESCENT GLOEILAMPEN

RF

Wiring Diagrams

Wiring Diagrams Nikobus

10A

47


PC-Link 05-200 L N 230V~

6

-

05-002-02

05-007-02 05-008-02

select

DCF

F01

mode

program

m8

05-001-02

m1 m2 m3 m4 m5

05-000-02

B

T1

ABCE

230V~

COM

DCF 77

B1 B2 bus

A B N

set

DCF 05-200

m6 m7

B1 B2

N

8

6789

L 230V~50Hz

7

+

2345

Wiring Diagrams

Wiring Diagrams Nikobus

230V~ 50Hz CH

M

1

L N 230V~

2

3

4

1

5

10A

PC-Logic 05-201

-

PC

L

B1 B2

N

B'1 B'2

L

05-201

230V~50Hz

COM

05-203

L N 230V~

48

B

B B'

1

2

DCF 05-200

230V~50Hz

COM

versions ko Wave horizontal

B1 B2

N

+

3

DCF

4

5

6

7

05-000-02 05-001-02 05-002-02 05-007-02 05-008-02

modem 10A

www.n ikouk.com


Wiring Diagrams

Wiring Diagrams Nikobus Feedback Module 05-207 with Touch Screen 05-096

Connection Modular Interface 05-056

Connection Modular Interface 05-058

Nikobus 1

Nikobus

3

2

L

170-00000

05-206 L N 230V~ Nikobus

L

B1 B2

N

05-206

230V~50Hz

Light sensor 350-10010

X

B

1

2

3

4

5

6

C

lx

05-206 1

2

3

a BUS b

b P K1 K2 :BUS

350-15010

www.n i k o u k . c o m

relay

10-836

1.0

a

Take out jumper, if using threewire system!

10-836

49


Ad

ko Wave horizontal

versions

Motion Sensors - easy to install - easy to program - easy to use

...your home your

50

www.n ikouk.com


Flush Surround plate

Niko Pure Stainless steel on anthracite (150-xxxxx)

Natural red (152-xxxxx)

White Steel (154-xxxxx)

Alu grey (155-xxxxx)

Bamboo (156-xxxxx)

Champagne steel (157-xxxxx)

Alu black (158-xxxxx)

Natural Soft Grey (159-xxxxx)

Natural Green (160-xxxxx)

Black Steel (161-xxxxx)

Stainless steel on white (250-xxxxx)

White (120-xxxxx)

Sterling (121-xxxxx)

Anthracite (122-xxxxx)

Bronze (123-xxxxx)

Dark brown (124-xxxxx)

Azure (125-xxxxx)

Silver (127-xxxxx)

Dark silver (128-xxxxx)

White (101-xxxxx)

Light grey (102-xxxxx)

Silver (103-xxxxx)

Cream (100-xxxxx)

White (101-xxxxx)

Light grey (102-xxxxx)

Silver (103-xxxxx)

Beige (104-xxxxx)

Sterling (121-xxxxx)

Anthracite (122-xxxxx)

Bronze (123-xxxxx)

Dark brown (124-xxxxx)

White coated (154-xxxxx)

Champagne coated (157-xxxxx)

Black Coated (161-xxxxx)

Colour Chart

Colour Reference Chart

Niko Intense

Gold (129-xxxxx)

Niko Original Cream (100-xxxxx)

Beige (104-xxxxx)

Finishing set

Because of the variability of the printing processes these colours should only be taken as a guide not as a reference www.n i k o u k . c o m

51


Index

Product Index 05-000-02 . . . . . . . . . . . . 8, 37

170-75211 . . . . . . . . . . . . . . . 32

340-00101 . . . . . . . . . . . . . . 25

xxx-00022 . . . . . . . . . . . . . . 15

05-001-02 . . . . . . . . . . . . 9, 38

170-75221. . . . . . . . . . . . . . . 32

340-00102 . . . . . . . . . . . . . . 25

xxx-00024 . . . . . . . . . . . .14, 15

05-002-02 . . . . . . . . . . . . . . . 8

170-75225 . . . . . . . . . . . . . . 31

340-00111 . . . . . . . . . . . . . . 29

xxx-00025 . . . . . . . . . . . .14, 15

05-007-02 . . . . . . . . . . . . 8, 39

170-75226 . . . . . . . . . . . . . . 32

340-00112 . . . . . . . . . . . . . . 29

05-008-02 . . . . . . . . . . . . 8, 47

170-75228 . . . . . . . . . . . . . . 32

340-00113 . . . . . . . . . . . . . . 29

05-056 . . . . . . . . . . . . . . 17, 49

170-75245 . . . . . . . . . . . . . . 31

340-00301 . . . . . . . . . . . . . . 29

05-058 . . . . . . . . . . . . . . 17, 49

170-75246 . . . . . . . . . . . . . . 31

340-00304 . . . . . . . . . . . . . . 28

05-060-01 . . . . . . . . . . . . . . 14

170-75247 . . . . . . . . . . . . . . 32

340-00305 . . . . . . . . . . . . . . 29

05-060-02 . . . . . . . . . . . . . . 15

170-75248 . . . . . . . . . . . . . . 31

350-10000 . . . . . . . . . . . . . . 20

xxx-00032 . . . . . . . . . . . . . . 16

05-061-01. . . . . . . . . . . . . . . 14

170-75328 . . . . . . . . . . . . . . 32

410-00001 . . . . . . . . . . . . . . 12

xxx-00033 . . . . . . . . . . . . . . 16

05-064-02 . . . . . . . . . . . . . . 16

170-75347 . . . . . . . . . . . . . . 32

410-00003 . . . . . . . . . . . . . . 12

xxx-00034 . . . . . . . . . . . . . . 16

05-074-01 . . . . . . . . . . . . . . 16

170-75348 . . . . . . . . . . . . . . 32

420-00000 . . . . . . . . . . . . . . 21

xxx-00035 . . . . . . . . . . . . . . 16

05-078-01 . . . . . . . . . . . . . . 16

199-00096 . . . . . . . . . . . . . . 34

420-00001 . . . . . . . . . . . . . . 21

xxx-00036 . . . . . . . . . . . . . . 16

05-078-02 . . . . . . . . . . . . . . 17

199-00097 . . . . . . . . . . . . . . 34

420-00003 . . . . . . . . . . . . . . 21

05-081-01. . . . . . . . . . . . . . . 15

199-00099 . . . . . . . . . . . . . . 34

420-00004 . . . . . . . . . . . . . . 21

05-085-01 . . . . . . . . . . . . . . 16

199-00199 . . . . . . . . . . . . . . 34

430-00500 . . . . . . . . . . . . . . 20

05-088 . . . . . . . . . . . . . . .11, 49

199-65200 . . . . . . . . . . . . . . 34

450-00020 . . . . . . . . . . . . . . 18

05-096 . . . . . . . . . . . .11, 43, 47

199-69550 . . . . . . . . . . . . . . 34

450-00021 . . . . . . . . . . . . . . 18

05-190 . . . . . . . . . . . . . . . . . 46

199-76900 . . . . . . . . . . . . . . 34

450-00060 . . . . . . . . . . . . . . 18

xxx-00044 . . . . . . . . . . . . . . 17

05-200 . . . . . . . . . . . . . . . 9, 48

320-00101 . . . . . . . . . . . . . . 21

65-410 . . . . . . . . . . . . . . . 9, 22

xxx-00045 . . . . . . . . . . . . . . 17

05-201 . . . . . . . . . . . . . . . 9, 48

320-00104 . . . . . . . . . . . . . . 21

xxx-00001 . . . . . . . . . . . .12, 14

xxx-00046 . . . . . . . . . . . . . . 17

05-203-01 . . . . . . . . . . . . 9, 48

320-00105 . . . . . . . . . . . . . . 21

xxx-00002 . . . . . . . . . . . .12, 14

versions ko Wave horizontal 05-205 . . . . . . . . . . . . 9, 33, 43

xxx-00047 . . . . . . . . . . . . . . 17

340-00001 . . . . . . . . . . . . . . 24

xxx-00003 . . . . . . . . . . . .12, 14

xxx-00099 . . . . . . . . . . . . . . 16

05-207 . . . . . . . . . . . . . . .11, 49

340-00002 . . . . . . . . . . . . . . 24

xxx-00004 . . . . . . . . . . . .12, 14

05-300 . . . . . . . . . . . . . . . 9, 12

340-00003 . . . . . . . . . . . . . . 24

xxx-00005 . . . . . . . . . . . . . . 14

05-715 . . . . . . . . . . . . . . . 8, 22

340-00004 . . . . . . . . . . . . . . 24

xxx-00006 . . . . . . . . . . . . . . 14

16-700 . . . . . . . . 33, 43, 44, 45

340-00005 . . . . . . . . . . . . . . 24

xxx-00007 . . . . . . . . . . . .12, 15

16-701 . . . . . . . . 33, 43, 44, 45

340-00006 . . . . . . . . . . . . . . 24

xxx-00008 . . . . . . . . . . . .12, 15

16-702 . . . . . . . . 33, 43, 44, 45

340-00007 . . . . . . . . . . . . . . 24

xxx-00009 . . . . . . . . . . . .12, 15

xxx-65500 . . . . . . . . . . . .31, 32

16-703 . . . . . . . . 33, 43, 44, 45

340-00008 . . . . . . . . . . . . . . 24

xxx-00010 . . . . . . . . . . . .12, 15

xxx-65600 . . . . . . . . . . . .31, 32

170-68800 . . . . . . . . . . . . . . 32

340-00009 . . . . . . . . . . . . . . 24

xxx-00011 . . . . . . . . . . . . .12, 15

xxx-75121 . . . . . . . . . . . . . . . 32

170-68900 . . . . . . . . . . . . . . 32

340-00010 . . . . . . . . . . . . . . 24

xxx-00012. . . . . . . . . . . . .12, 15

xxx-75125 . . . . . . . . . . . . . . . 31

170-75111 . . . . . . . . . . . . . . . 32

340-00011 . . . . . . . . . . . . . . 24

xxx-00013. . . . . . . . . . . . .12, 15

xxx-75126 . . . . . . . . . . . . . . . 31

170-75121 . . . . . . . . . . . . . . . 32

340-00012 . . . . . . . . . . . . . . 24

xxx-00014 . . . . . . . . . . . .12, 15

170-75125. . . . . . . . . . . . . . . 31

340-00013 . . . . . . . . . . . . . . 24

xxx-00015 . . . . . . . . . . . .12, 16

170-75126 . . . . . . . . . . . . . . 31

340-00014 . . . . . . . . . . . . . . 24

xxx-00016 . . . . . . . . . . . .12, 16

170-75128 . . . . . . . . . . . . . . 32

340-00015 . . . . . . . . . . . . . . 28

xxx-00017. . . . . . . . . . . . .12, 16

170-75145 . . . . . . . . . . . . . . 31

340-00018 . . . . . . . . . . . . . . 28

xxx-00018 . . . . . . . . . . . .12, 16

170-75146 . . . . . . . . . . . . . . 31

340-00021 . . . . . . . . . . . . . . 25

xxx-00019 . . . . . . . . . . . .12, 16

xxx-75245 . . . . . . . . . . . . . . 31

170-75147 . . . . . . . . . . . . . . 32

340-00022 . . . . . . . . . . . . . . 25

xxx-00020 . . . . . . . . . . . .12, 16

xxx-75246 . . . . . . . . . . . . . . 31

170-75148 . . . . . . . . . . . . . . 31

340-00023 . . . . . . . . . . . . . . 28

xxx-00021. . . . . . . . . . . . .12, 16

xxx-78400 . . . . . . . . . . . . . . 20

52

xxx-00026 . . . . . . . . . . . .14, 15 xxx-00027 . . . . . . . . . . . .14, 15 xxx-00028 . . . . . . . . . . . .14, 15 xxx-00029 . . . . . . . . . . . .14, 15

xxx-00037 . . . . . . . . . . . . . . 16 xxx-00038 . . . . . . . . . . . . . . 16 xxx-00042 . . . . . . . . . . . . . . 17 xxx-00043 . . . . . . . . . . . . . . 17

xxx-00500 . . . . . . . . . . . . . . 20 xxx-65100. . . . . . . . . . . . .31, 32 xxx-65200 . . . . . . . . . . . .31, 32 xxx-65400 . . . . . . . . . . . . . . 32

xxx-75145. . . . . . . . . . . . . . . 31 xxx-75146. . . . . . . . . . . . . . . 31 xxx-75225. . . . . . . . . . . . . . . 31 xxx-75226. . . . . . . . . . . . . . . 31

www.n ikouk.com


Sensors Ad

...your your home your www.n i k o u k . c o m

53


Niko Home Automation We hope that inside this catalogue you will have found the products and applications to help you design and install the best home automation system for your needs. If you need any technical assistance, advice or additional information, please contact us as detailed below.

Sales and Technical support Tel: +44 (0) 1525 877707 Fax: +44 (0) 1525 877708 Email: info@nikouk.com

Training for industry professionals If you would like to learn more about Niko products, please contact us to enrol on a free Niko training day. For more information about these, please contact info@nikouk.com

Niko (UK) Limited Black Horse Barns, Fancott Toddington, Beds LU5 6HT Tel: +44 (0) 1525 877707 Fax: +44 (0) 1525 877708 Email: info@nikouk.com www.nikouk.com 09-09

Updated Niko Catalogue  

Latest Niko Catalogue

Read more
Read more
Similar to
Popular now
Just for you