Page 1

Specifications: RECORE™ Recycled Wall Technology (smooth) Substrate no. 157 Performs and hangs like traditional vinyl wallcovering. Features recycled content and reduced environmental impact. Smooth, low-gloss finish. Other benefits include: 20% post-consumer content; low VOC emissions; durable, long life cycle. Contributes toward LEED MR credits.

RECORE™ contains additives to resist mold and other microbiological growth on the

product. These additives, however, will not prevent mold growth if moisture is allowed to accumulate in or behind the wall. Category

Wallcovering

Contents

PVC face (80%) with 100% post-consumer recycled PET backing (20%)

Available widths/sizes 54” Weight/thickness

20 oz/lin yd

Print technology

UV direct

Fire rating

ASTM E-84 class A

Fabrication options All panels are printed with 2” bleed on all edges and between panels. An overlap/double cut installation method is used. Care and Cleaning Instructions Clean from the bottom of the wall upward to protect the baseboard and to prevent streaking. Rinse thoroughly with clean water from the top down using a sponge. Dry with a clean cloth. Do not use active solvent-type cleaning preparations, such as nail polish remover, tar and bug removers, abrasive cleaners, steel wool, etc., because they will remove the print and/or finish from the wallcovering. Installation Instructions See digital wallcovering installation instructions Warranty 10 year limited warranty unless otherwise specified in project quotation This is a generic specification document. When writing your specifications, please contact your Designtex Sales Representative or Surface Imaging Coordinator to verify the specific item numbers assigned to your project. Designtex

800.221.1540

designtex.com ver. 2 April 1, 2010


Specifications: RECORE™ Recycled Wall Technology (textured) Substrate no. 208 Performs and hangs like traditional vinyl wallcovering. Features recycled content and reduced environmental impact. Lightly stippled, low-gloss finish. Other benefits include: 20% post-consumer content; low VOC emissions; durable, long life cycle. Contributes toward LEED MR credits.

RECORE™ contains additives to resist mold and other microbiological growth on the

product. These additives, however, will not prevent mold growth if moisture is allowed to accumulate in or behind the wall. Category

Wallcovering

Contents

PVC face (80%) with 100% post-consumer recycled PET backing (20%)

Available widths/sizes 54” Weight/thickness

20 oz/lin yd

Print technology

UV direct

Fire rating

ASTM E-84 class A

Fabrication options All panels are printed with 2” bleed on all edges and between panels. An overlap/double cut installation method is used. Care and Cleaning Instructions Clean from the bottom of the wall upward to protect the baseboard and to prevent streaking. Rinse thoroughly with clean water from the top down using a sponge. Dry with a clean cloth. Do not use active solvent-type cleaning preparations, such as nail polish remover, tar and bug removers, abrasive cleaners, steel wool, etc., because they will remove the print and/or finish from the wallcovering. Installation Instructions See digital wallcovering installation instructions Warranty 10 year limited warranty unless otherwise specified in project quotation This is a generic specification document. When writing your specifications, please contact your Designtex Sales Representative or Surface Imaging Coordinator to verify the specific item numbers assigned to your project. Designtex

800.221.1540

designtex.com ver. 2 April 1, 2010


Specifications: Digital Duraprene™ Substrate no. 215 PVC-free type II commercial performance wallcovering with a smooth matte finish. 30% of total product weight is post-consumer waste fiber. Contributes toward LEED MR credits. Category

Wallcovering

Contents

Synthetic latex (45%), post-consumer waste cellulose fiber (35%), polyester fiber (10%), virgin wood pulp fiber (10%)

Available widths/sizes 54” Weight/thickness

15 oz/lin yd

Print technology

UV direct

Fire rating

ASTM E-84 class A

Fabrication options

All panels are printed with 2” bleed on all edges and between panels. An overlap/double cut installation method is used.

Care and Cleaning Instructions Wipe with a clean, damp, soft cloth. Do not use abrasive material or cleaner. Spot Cleaning: Always pretest cleaners in an inconspicuous area before attempting to clean. Installation Instructions See digital wallcovering installation instructions Warranty 10 year limited warranty unless otherwise specified in project quotation

This is a generic specification document. When writing your specifications, please contact your Designtex Sales Representative or Surface Imaging Coordinator to verify the specific item numbers assigned to your project.

Designtex

800.221.1540

designtex.com ver. 1 March 1, 2010


Specifications: ECORE™ Advanced Wall Technology Substrate no. 156 The industry’s first extreme performance environmentally preferable wallcovering platform. Delivers all of the performance characteristics of type II vinyl wallcovering in an energy-saving, lightweight, PVC-free construction. Other benefits include: breathable, reclamation program, contains no PFOA, formaldehyde, cadmium or mercury; Greengaurd® and Greengaurd® Children + School certified, durable with a long life cycle. Contributes toward LEED MR credits. Category

Wallcovering

Contents

100% evolon®

Available widths/sizes 52” Weight/thickness

9 oz/lin yd

Print technology

UV direct

Fire rating

ASTM E-84 class A

Fabrication options All panels are printed with 2” bleed on all edges and between panels. An overlap/double cut installation method is used. Care and Cleaning Instructions Non-woven polyester wallcoverings are completely washable. Moderate soiling can be removed using a warm detergent solution and a damp cloth. Wipe off with clean water and ensure the surface is dry, especially along the skirting. Always wash from the bottom upwards. Top-down will cause runs on a dry surface which will stain. If in doubt do a trial in an inconspicuous area. The use of strong bleach or abrasive powders is not recommended. Installation Instructions See digital wallcovering installation instructions Warranty 10 year limited warranty unless otherwise specified in project quotation

This is a generic specification document. When writing your specifications, please contact your Designtex Sales Representative or Surface Imaging Coordinator to verify the specific item numbers assigned to your project.

Designtex

800.221.1540

designtex.com ver. 1 March 1, 2010

/Digital%20Walls%20Substrate%20Speci  

http://cdn.designtex.com//files/8f7e185f1b13405ab052e129c04b5d77/Digital%20Walls%20Substrate%20Specification.pdf

Read more
Read more
Similar to
Popular now
Just for you