Issuu on Google+

IBM Power Systems EXAM 000-106 Power Systems with POWER7 Common Technical Sales Skills - v1

http://www.certificationtutorials.com/ibm/000-106-exam.htm

For interactive and self-paced preparation of exam 000-106, try our practice exams. Practice exams also include self assessment and reporting features

http://www.certificationtutorials.com

1


Question: 1 Click the Exhibit button.

You are deploying a Virtual Chassis consisting of four EX4200s. You have powered on all four switches at the same time with the settings shown in the exhibit. Which Virtual Chassis member will become the master? A. Switch-1 B. Switch-2 C. Switch-3 D. Switch-4

Answer: D Question: 2 Click the Exhibit button.

Refer to the command-line output shown in the exhibit. How many routes received from the BGP peer at 192.168.1.2 are active for this router? For interactive and self-paced preparation of exam 000-106, try our practice exams. Practice exams also include self assessment and reporting features

http://www.certificationtutorials.com

2


A. 3 routes B. 4 routes C. 46 routes D. 53 routes

Answer: C Question: 3 You want to configure per-flow equal-cost multipath (ECMP) load balancing for only the OSPF routes on Router-1.Which configuration example accomplishes this? A. protocols { ospf { export EMCP; } } policy-options { policy-statement ECMP { term first { from protocol ospf; then { load-balance per-packet; } } } } B. routing-options { export ECMP; } policy-options { policy-statement ECMP { term first { from protocol ospf; then { load-balance per-packet; } } } } C. routing-options { forwarding-table { export ECMP; } } policy-options { policy-statement ECMP {

For interactive and self-paced preparation of exam 000-106, try our practice exams. Practice exams also include self assessment and reporting features

http://www.certificationtutorials.com

3


term first { from protocol ospf; then { load-balance per-packet; } } } } D. routing-options { forwarding-table { export ECMP; } } policy-options { policy-statement ECMP { term first { from protocol ospf; then { load-balance ECMP; } } } }

Answer: C Question: 4 You want your switch to disable an edge port when it receives spanning tree communications on that port. Which feature accomplishes this objective? A. RSTP edge port B. BPDU protection C. root protection D. switch protection

Answer: B

For interactive and self-paced preparation of exam 000-106, try our practice exams. Practice exams also include self assessment and reporting features

http://www.certificationtutorials.com

4


Question: 5 You must create an IP-IP tunnel between two routers on your network. These two devices are separated by 10 hops. The tunnel appears to be established, but no traffic is traversing the tunnel. What causes this behavior? A. The tunnel's TTL has not been modified from the default value of 8. B. Traffic is being dropped along the path because a configured MTU is greater than the tunnel's MTU. C. A route that directs traffic into the tunnel is not present. D. BGP has not been enabled between tunnel end-points.

Answer: C Question: 6 You just implemented a Layer 2 network that uses RSTP. Which two statements are true? (Choose two.) A. All operational switch ports configured for edge mode will immediately transition to the forwarding state. B. All operational switch ports configured for full-duplex operation will function in point-to-point mode. C. You must manually specify the interfaces you want to operate in point-to-point mode. D. Edge ports automatically discard received BPDUs.

Answer: A,B,

For interactive and self-paced preparation of exam 000-106, try our practice exams. Practice exams also include self assessment and reporting features

http://www.certificationtutorials.com

5


Thank You For Trying Our Demo

IBM Power Systems EXAM 000-106 Power Systems with POWER7 Common Technical Sales Skills - v1

http://www.certificationtutorials.com/ibm/000-106-exam.htm

If you have any questions or difficulties regarding this product, feel free to contact Us. For interactive and self-paced preparation of exam 000-106, try our practice exams. Practice exams also include self assessment and reporting features!

For interactive and self-paced preparation of exam 000-106, try our practice exams. Practice exams also include self assessment and reporting features

http://www.certificationtutorials.com

6


IBM IBM POWER SYSTEMS 000-106