Page 1

CER products • FieldCommander

• micro FieldCommander

• Embedded Servers

• FCDomus domotica software ®

Field- r e d n a m Com de ! i n si V2009-a


uFC 9015

Network I/O module uFC 9015; 7ch RTD input Webbased smart ethernet Measurement & Control Highlights Link this I/O module to your computernetwork for measurement & control. To install this module support for several software environments is included and for easy management a softwaretool is included. Now you extend your network with reliable I/O in a short time with low costs. This I/O module can be easily combined with a webcontroller like a FieldCommander or a PC. The module can be operated remotely.

Network support • Ethernet; 10/100 Mbps • UTP RJ45 connection • Modbus/TCP; TCP/IP; UDP

Analog Input • Support analog RTD inputs

Hardware

MicroFieldCommander uFC9015

Analog RTD input: 7x • Analog Input: – Input channels: 7 – Input type • 2 or 3 wire RTD • Pt100: -50 ~15C; 0~1000C; 0~200C; -200~200C • Pt1000: -40 ~ 160C • Ni518: -80~100C; 0~100C – Sampling: 10s/sec. – Resolution: 16 bit – Volt protection:+/- 35VDC

Order info uFC9015 FCPwr10 FCPwr10UK

Micro-FieldCommander; 7x RTD analog input. Powersupply (euro) Powersupply (UK)

• Based on the low cost e-CER platform with IP-stack. Power supply: 10-30 VDC Power consumption: ca. 2,4W • DIN-rail clips included

Software tools • DLL, ActiveX, VB, Delphi • Can be linked with a FieldCommander webcontroller.

Product options. • Powersupply

CER International bv Postbus 258 NL-4700 AG Roosendaal Tel.: +31(0)165-557417 Fax: +31(0)165-562151 www.CER.com info@CER.com V2009-a

Copyright © 2010 CER International bv. All rights reserved. Specifications may change without notice. CER®, FieldCommander®, FCDomus® and FCEnterCom® are registered trademarks.


uFC 9017

Network I/O module uFC 9017; 8ch Analog input Webbased smart ethernet Measurement & Control Highlights Link this I/O module to your computernetwork for measurement & control. To install this module support for several software environments is included and for easy management a softwaretool is included. Now you extend your network with reliable I/O in a short time with low costs. This I/O module can be easily combined with a webcontroller like a FieldCommander or a PC. The module can be operated remotely.

Network support • Ethernet; 10/100 Mbps • UTP RJ45 connection • Modbus/TCP; TCP/IP; UDP

Analog Input • Support analog V/I inputs

Digital Output • Support digital outputs

MicroFieldCommander uFC9017

Analog V/I input: 8x ; DO: 2x •Analog Input: – Input channels: 8 – Input type • differential • thermocouple+/V ; +/- mV; +/- mA • +/- 150mV; +/- 500V; +/- 1V; +/- 10V • 0-20mA; 4-20mA – Sampling: 10s/sec. – Resolution: 16 bit – Volt protection:+/- 35VDC • Digital Output: – Channels: 2 – Sink type: Open collector to 30V, 100mA(maximum load)

Order info uFC9017 FCPwr10 FCPwr10UK

Micro-FieldCommander; 8x analog V/I input. Powersupply (euro) Powersupply (UK)

Hardware • Based on the low cost e-CER platform with IP-stack. Power supply: 10-30 VDC Power consumption: ca. 2,4W • DIN-rail clips included

Software tools • DLL, ActiveX, VB, Delphi • Can be linked with a FieldCommander webcontroller.

Product options. • Powersupply

CER International bv Postbus 258 NL-4700 AG Roosendaal Tel.: +31(0)165-557417 Fax: +31(0)165-562151 www.CER.com info@CER.com V2009-a

Copyright © 2010 CER International bv. All rights reserved. Specifications may change without notice. CER®, FieldCommander®, FCDomus® and FCEnterCom® are registered trademarks.


uFC 9019

Network I/O module uFC 9019; 8ch Thermocouple in Webbased smart ethernet Measurement & Control Highlights Link this I/O module to your computernetwork for measurement & control. To install this module support for several software environments is included and for easy management a softwaretool is included. Now you extend your network with reliable I/O in a short time with low costs. This I/O module can be easily combined with a webcontroller like a FieldCommander or a PC. The module can be operated remotely.

Network support • Ethernet; 10/100 Mbps • UTP RJ45 connection • Modbus/TCP; TCP/IP; UDP

Analog Input • Support analog thermoc. inputs

Digital Output • Support digital outputs

MicroFieldCommander uFC9019

Anal.Thermocouple inp.: 8x ; DO: 2x •Analog Input: – Input channels: 8 – Input type • differential • thermocouple • J-type • K-type: 0~1370C • T-type: -100 ~ 400C • E/R/S/B-type – Sampling: 10s/sec. – Resolution: 16 bit – Volt protection:+/- 35VDC • Digital Output: – Channels: 2 – Sink type: Open collector to 30V, 100mA(maximum load)

Order info uFC9019 FCPwr10 FCPwr10UK

Micro-FieldCommander; 8x Thermocouple input. Powersupply (euro) Powersupply (UK)

Hardware • Based on the low cost e-CER platform with IP-stack. Power supply: 10-30 VDC Power consumption: ca. 2,4W • DIN-rail clips included

Software tools • DLL, ActiveX, VB, Delphi • Can be linked with a FieldCommander webcontroller.

Product options. • Powersupply

CER International bv Postbus 258 NL-4700 AG Roosendaal Tel.: +31(0)165-557417 Fax: +31(0)165-562151 www.CER.com info@CER.com V2009-a

Copyright © 2010 CER International bv. All rights reserved. Specifications may change without notice. CER®, FieldCommander®, FCDomus® and FCEnterCom® are registered trademarks.


uFC 9050

Network I/O module uFC 9050; 18ch digital I/O Webbased smart ethernet Measurement & Control Highlights Link this I/O module to your computernetwork for measurement & control. To install this module support for several software environments is included and for easy management a softwaretool is included. Now you extend your network with reliable I/O in a short time with low costs. This I/O module can be easily combined with a webcontroller like a FieldCommander or a PC. The module can be operated remotely.

Network support • Ethernet; 10/100 Mbps • UTP RJ45 connection • Modbus/TCP; TCP/IP; UDP

Digital Input • Support dry/wet contact input Support counter/frequency input

Digital Output • Support digital outputs

MicroFieldCommander uFC9050

Digital In: 12x ; Digital Out: 6x •Digital Input: – Input channels: 12 – Input type • Dry contact – logic level 0: Close to ground – logic level 1: Open • Wet contact: – logic level 0: 0~3V – logic level 1: 10~30V – Counter/Frequency: Each channel support 3KHz input – Isolation: Fully photo-isolation 2,000Vrms • Digital Output: – Channels: 6 – Sink type: Open collector to 30V, 100mA(maximum load) – Pulse output – Isolation: Fully photo-isolation 2,000Vrms

Order info uFC9050 FCPwr10 FCPwr10UK

Micro-FieldCommander; 18ch digital I/O. Powersupply (euro) Powersupply (UK)

Hardware • Based on the low cost e-CER platform with IP-stack. Power supply: 10-30 VDC Power consumption: ca. 2,4W • DIN-rail clips included

Software tools • DLL, ActiveX, VB, Delphi • Can be linked with a FieldCommander webcontroller.

Product options. • Powersupply

CER International bv Postbus 258 NL-4700 AG Roosendaal Tel.: +31(0)165-557417 Fax: +31(0)165-562151 www.CER.com info@CER.com V2009-a

Copyright © 2010 CER International bv. All rights reserved. Specifications may change without notice. CER®, FieldCommander®, FCDomus® and FCEnterCom® are registered trademarks.


uFC 9051

Network I/O module uFC 9051; 14ch digital I/O Webbased smart ethernet Measurement & Control Highlights Link this I/O module to your computernetwork for measurement & control. To install this module support for several software environments is included and for easy management a softwaretool is included. Now you extend your network with reliable I/O in a short time with low costs. This I/O module can be easily combined with a webcontroller like a FieldCommander or a PC. The module can be operated remotely.

Network support • Ethernet; 10/100 Mbps • UTP RJ45 connection • Modbus/TCP; TCP/IP; UDP

Digital Input • Support dry/wet contact input Support counter/frequency input

Digital Output • Support digital outputs

MicroFieldCommander uFC9051

D.In: 12x ; D.Out: 2x; Counter In: 2x •Digital Input: – Input channels: 12 – Input type • Dry contact – logic level 0: Close to ground – logic level 1: Open • Wet contact: – logic level 0: 0~3V – logic level 1: 10~30V – Counter/Frequency: Each channel support 3KHz input – Isolation: Fully photo-isolation 2,000Vrms • Digital Output: – Channels: 2 – Sink type: Open collector to 30V, 100mA(maximum load) – Pulse output – Isolation: Fully photo-isolation 2,000Vrms • Digital Counter Input: – Channels: 2

Order info uFC9051 FCPwr10 FCPwr10UK

Micro-FieldCommander; 14ch digital I/O. Powersupply (euro) Powersupply (UK)

Hardware • Based on the low cost e-CER platform with IP-stack. Power supply: 10-30 VDC Power consumption: ca. 2,4W • DIN-rail clips included

Software tools • DLL, ActiveX, VB, Delphi • Can be linked with a FieldCommander webcontroller.

Product options. • Powersupply

CER International bv Postbus 258 NL-4700 AG Roosendaal Tel.: +31(0)165-557417 Fax: +31(0)165-562151 www.CER.com info@CER.com V2009-a

Copyright © 2010 CER International bv. All rights reserved. Specifications may change without notice. CER®, FieldCommander®, FCDomus® and FCEnterCom® are registered trademarks.


uFC 9052

Network I/O module uFC 9052; 16ch digital I/O Webbased smart ethernet Measurement & Control Highlights Link this I/O module to your computernetwork for measurement & control. To install this module support for several software environments is included and for easy management a softwaretool is included. Now you extend your network with reliable I/O in a short time with low costs. This I/O module can be easily combined with a webcontroller like a FieldCommander or a PC. The module can be operated remotely.

Network support • Ethernet; 10/100 Mbps • UTP RJ45 connection • Modbus/TCP; TCP/IP; UDP

Digital Input • Support dry/wet contact input Support counter/frequency input

Digital Output • Support digital outputs

MicroFieldCommander uFC9052

Digital In: 8x ; Digital Out: 8x; •Digital Input: – Input channels: 8 – Input type • Dry contact – logic level 0: Close to ground – logic level 1: Open • Wet contact: – logic level 0: 0~3V – logic level 1: 10~30V – Counter/Frequency: Each channel support 3KHz input – Isolation: Fully photo-isolation 2,000Vrms • Digital Output: – Channels: 8 – Sink type: Open Collector upto 30V, 1000mA(max) – Isolation: 2,000Vrms

Order info uFC9052 FCPwr10 FCPwr10UK

Micro-FieldCommander; 16ch digital I/O. Powersupply (euro) Powersupply (UK)

Hardware • Based on the low cost e-CER platform with IP-stack. Power supply: 10-30 VDC Power consumption: ca. 2,4W • DIN-rail clips included

Software tools • DLL, ActiveX, VB, Delphi • Can be linked with a FieldCommander webcontroller.

Product options. • Powersupply

CER International bv Postbus 258 NL-4700 AG Roosendaal Tel.: +31(0)165-557417 Fax: +31(0)165-562151 www.CER.com info@CER.com V2009-a

Copyright © 2010 CER International bv. All rights reserved. Specifications may change without notice. CER®, FieldCommander®, FCDomus® and FCEnterCom® are registered trademarks.


CER Development

Manufacturer

The CER development team is capable to integrate your special requirements.

CER can brand label the products for you.

.

.

Order info: contact your local CER representative:

CER International bv Postbus 258 NL-4700 AG Roosendaal Tel.: +31(0)165-557417 Fax: +31(0)165-562151 www.CER.com info@CER.com V2009-a Copyright © 2010 CER International bv. All rights reserved. Specifications may change without notice. CER®, FieldCommander®, FCDomus® and FCEnterCom® are registered trademarks.


micro FieldCommanders  

Small and smart embedded devices for linking I/O (digital or analog input or output) to your network (ethernet LAN)

Advertisement
Read more
Read more
Similar to
Popular now
Just for you