Handling of the Magnet Wire In all the stages of manufacture of the Magnet Wires, CENTELSA applies a special process (lubricant) with the purpose of preserving the soft temper copper, so that the wire can be winded and be wound with facility and so that it remains in the adequate position in a coil, without backing down or unrolling. Additionally, the user must have precautions during the subsequent use of the wire to avoid that the work in cold hardens it, thus making its winding easier. In order to avoid the rigidity derived from the handling and to conserve the wire in good state, it is recommended to have presents the following points: 1. To avoid operations of rewinding.
2. To avoid great tensions in winding so that the wire does not stretch, because this is a form of work in cold that besides to modify the soft temper, reduces the diameter. It is recommended not to apply in any case, greater mechanical tensions for each size than the indicated ones.
3. To avoid all unnecessary bending of the wire when winding, trying to occupy the lesser possible number of pulleys or guides, the ones that in any case will have a diameter greater than the one of the wire heavier than uses in this device.
Published on Oct 30, 2012